hacks/buildboxwifi/network.interfaces

64 lines
1.6 KiB
Plaintext
Raw Permalink Normal View History

2016-05-21 02:07:11 +00:00
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto em1
iface em1 inet static
address 0.0.0.0
# This is an autoconfigured IPv6 interface
iface em1 inet6 auto
# add wired port to bridge
allow-hotplug br0
auto br0
iface br0 inet dhcp
pre-up brctl addbr br0
pre-up brctl addif br0 em1
# internal wireless not used
allow-hotplug wlan0
auto wlan0
iface wlan0 inet static
address 0.0.0.0
iface wlan0 inet6 auto
# external ralink usb wifi abg
allow-hotplug wlan1
auto wlan1
iface wlan1 inet static
pre-up ifconfig wlan1 hw ether 00:c0:ca:8d:8a:10
address 0.0.0.0
iface wlan1 inet6 auto
# ssid: eeqj-dut
allow-hotplug wlan1_0
auto wlan1_0
iface wlan1_0 inet static
address 172.16.1.254
netmask 255.255.255.0
post-up echo 1 > /proc/sys/net/ipv4/ip_forward
post-up iptables -t nat -A POSTROUTING -s 172.16.1.0/24 -o br0 -j MASQUERADE
post-up iptables -t nat -A PREROUTING -s 172.16.1.0/24 -p tcp --dport 80 -j REDIRECT --to-ports 10080
post-up iptables -t nat -A PREROUTING -s 172.16.1.0/24 -p tcp --dport 443 -j REDIRECT --to-ports 10443
iface wlan1_0 inet6 auto
# TODO: setup dnsmasq and nat stuff
# ssid: eeqj-bridge
# bridge this ssid to the wired port
allow-hotplug wlan1_1
iface wlan1_1 inet static
address 0.0.0.0
up brctl addif br0 wlan1_1
# eeqj-hostonly
allow-hotplug wlan1_2
auto wlan1_2
iface wlan1_2 inet static
address 172.16.0.254
netmask 255.255.255.0
iface wlan1_2 inet6 auto