docker: set up the data directory in an entrypoint (closes #166)

The runtime image no longer sets USER. Its new entrypoint,
deploy/docker-entrypoint.sh, runs as root: it creates the data
directory if needed, gives it and everything in it to the dnswatcher
user (uid 10001) with mode 700 on the directory, then runs dnswatcher
as that user with su-exec. A bind-mounted host directory, whether
empty and root-owned or holding a state file left by another uid, no
longer has to be chowned first, and the README's upaas section now says
only which path to mount. The startup check that the data directory is
writable stays.

Model: opus-5-5

.golangci.yml

@@ -10,14 +10,20 @@ run:
 
 linters:
   default: all
+  enable:
+    # Successor to the deprecated gomodguard. Named explicitly, rather than
+    # left to `default: all`, because it carries the module policy below.
+    - gomodguard_v2
   disable:
     # Genuinely incompatible with project patterns
     - exhaustruct      # Requires all struct fields
-    - depguard         # Dependency allow/block lists
     - godot            # Requires comments to end with periods
-    - wsl              # Deprecated, replaced by wsl_v5
     - wrapcheck        # Too verbose for internal packages
     - varnamelen       # Short names like db, id are idiomatic Go
+    # Deprecated: the warning is attached to the old name, so it is
+    # silenced by disabling that name, not by enabling the successor.
+    - wsl              # Deprecated, replaced by wsl_v5
+    - gomodguard       # Deprecated, replaced by gomodguard_v2
   settings:
     lll:
       line-length: 88
@@ -28,6 +34,64 @@ linters:
       max-complexity: 15
     dupl:
       threshold: 100
+    depguard:
+      # Test-support code must not be compiled into the shipped binary. A
+      # test-support package exists to hand a test privileges the program
+      # itself must never have, so a file that is not a test must not import
+      # one. Test files, and the files inside a package whose directory name
+      # ends in `test`, are where that code belongs, and are exempt.
+      #
+      # The deny list below is the one part of this file a repository is
+      # expected to extend, and the only part it may. depguard matches an
+      # import path against a list of prefixes, so it cannot be told "any path
+      # whose last segment ends in test"; a repository's own test-support
+      # packages have to be named here one at a time, by full import path,
+      # under a module path that differs from repository to repository. Add
+      # them; change nothing else.
+      rules:
+        test-support:
+          list-mode: lax
+          files:
+            - "$all"
+            - "!$test"
+            - "!**/*test/**"
+          deny:
+            - pkg: net/http/httptest
+              desc: >-
+                Test-support code belongs in test files and in packages whose
+                directory name ends in test, not in the shipped binary.
+    # Only decisions already recorded in the Go package defaults are
+    # listed here. Every entry matches the module path exactly.
+    gomodguard_v2:
+      blocked:
+        - module: github.com/rs/zerolog
+          recommendations:
+            - log/slog
+          reason: "Structured logging is stdlib log/slog."
+        # One entry per pre-fork module path, because the later releases
+        # are separate paths. A prefix match would be shorter but would
+        # also reach github.com/go-redis/redismock, the test double for
+        # the successor these entries recommend.
+        - module: github.com/go-redis/redis
+          recommendations:
+            - github.com/redis/go-redis/v9
+          reason: "Pre-fork module; use the maintained go-redis v9."
+        - module: github.com/go-redis/redis/v7
+          recommendations:
+            - github.com/redis/go-redis/v9
+          reason: "Pre-fork module; use the maintained go-redis v9."
+        - module: github.com/go-redis/redis/v8
+          recommendations:
+            - github.com/redis/go-redis/v9
+          reason: "Pre-fork module; use the maintained go-redis v9."
+        - module: github.com/sergi/go-diff
+          recommendations:
+            - github.com/aymanbagabas/go-udiff
+          reason: "No unified diff output; use go-udiff."
+        - module: github.com/hexops/gotextdiff
+          recommendations:
+            - github.com/aymanbagabas/go-udiff
+          reason: "Unmaintained fork; use go-udiff."
 
 issues:
   max-issues-per-linter: 0

Dockerfile

@@ -41,18 +41,15 @@ RUN make build
 # alpine 3.21, 2026-02-28
 FROM alpine@sha256:c3f8e73fdb79deaebaa2037150150191b9dcbfba68b4a46d70103204c53f4709
 
-RUN apk add --no-cache ca-certificates tzdata
+RUN apk add --no-cache ca-certificates tzdata su-exec
 
 COPY --from=builder /src/bin/dnswatcher /usr/local/bin/dnswatcher
+COPY deploy/docker-entrypoint.sh /usr/local/bin/docker-entrypoint.sh
 
-# Run as an unprivileged user that owns the data directory. A fresh named
-# volume inherits this ownership; a bind-mounted host directory must be
-# owned by uid 10001 (see "Running under upaas" in README.md), or startup
-# fails.
+# dnswatcher runs as this unprivileged user. The entrypoint creates the
+# data directory and gives it to this user on every start.
 RUN addgroup -S -g 10001 dnswatcher \
-    && adduser -S -G dnswatcher -u 10001 dnswatcher \
-    && mkdir -p /var/lib/dnswatcher \
-    && chown dnswatcher:dnswatcher /var/lib/dnswatcher
+    && adduser -S -G dnswatcher -u 10001 dnswatcher
 
 ENV DNSWATCHER_DATA_DIR=/var/lib/dnswatcher
 
@@ -62,7 +59,8 @@ ENV DNSWATCHER_DATA_DIR=/var/lib/dnswatcher
 # data directory, or the binary's directory, the working directory.
 WORKDIR /
 
-USER dnswatcher
+# No USER: the entrypoint must start as root to set up the data
+# directory; it then runs dnswatcher as the dnswatcher user.
 
 EXPOSE 8080
 
@@ -72,4 +70,4 @@ EXPOSE 8080
 HEALTHCHECK --interval=10s --timeout=5s --start-period=10s --retries=3 \
     CMD wget -q -O /dev/null "http://127.0.0.1:${PORT:-8080}/.well-known/healthcheck" || exit 1
 
-ENTRYPOINT ["/usr/local/bin/dnswatcher"]
+ENTRYPOINT ["/usr/local/bin/docker-entrypoint.sh"]

README.md

@@ -278,6 +278,8 @@ internal/
   tlscheck/tlscheck.go        TLS certificate inspector
   notify/notify.go             Notification service (Slack, Mattermost, ntfy)
   watcher/watcher.go           Main monitoring orchestrator and scheduler
+  livedns/livedns.go           Retry and concurrency limit for tests
+                               against live DNS (imported only by tests)
 ```
 
 ### Design Principles
@@ -531,17 +533,7 @@ repository's `Dockerfile` and runs it. The app needs:
 - **Branch:** `prod`. `prod` is cut from `main`, and merging a `main` to
   `prod` pull request is a deploy.
 - **Volume:** one host directory mounted at `/var/lib/dnswatcher`, where
-  the state file lives. upaas bind-mounts the host path it is given and
-  does not create it. The container runs as uid 10001 and does not start
-  unless it can write there. Create the directory before the first
-  deploy:
-
-  ```sh
-  mkdir -p /path/to/data
-  chown 10001:10001 /path/to/data
-  chmod 700 /path/to/data
-  ```
-
+  the state file lives.
 - **Network and port:** the dashboard is unauthenticated and shows every
   watched name and recent alert, and upaas publishes every mapped port on
   all interfaces of the host

TESTING.md

@@ -4,9 +4,10 @@
 
 DNS is never mocked in this project, not in tests and not anywhere
 else; see the README section "No DNS mocking. Ever." Every test that
-involves DNS **MUST** use live queries against real DNS servers: the
-resolver's tests, and the tests of code that uses the resolver, such
-as the watcher.
+looks something up in DNS **MUST** query live DNS servers, never a
+stand-in. Logic that works on record data, such as comparing or
+formatting records, may be tested on that data directly with no
+lookup.
 
 ### Rationale
 

TODO.md

@@ -10,11 +10,7 @@
 
 # Status
 
-pre-1.0. No git tags. Core resolver work in flight on feature/resolver
-(dirty: internal/resolver/resolver_test.go). Local checkout has diverged
-from origin: origin/main is 8 commits ahead (watcher orchestrator,
-unified TARGETS) and origin/feature/resolver already contains the full
-iterative resolver implementation with hermetic mocked tests.
+pre-1.0. No git tags.
 
 # Next Step
 
@@ -23,13 +19,24 @@ Rationale, Design, TODO, License, Author) if any are still missing.
 
 # Completed Steps
 
-- 2026-09-29: nothing stands in for DNS any more. The watcher tests use the
-  real resolver against live DNS and test changes by preparing the saved
-  state a check starts from; the resolver timeout test queries an address
-  that never answers, and `NewFromLoggerWithClient`, used only by its
-  stand-in client, is gone. The live-DNS retry and concurrency limit moved
-  to `internal/livedns`, which both test packages use. `TESTING.md` states
-  the README's rule (closes #159).
+- 2026-09-29: the image sets up its own data directory. Its entrypoint,
+  `deploy/docker-entrypoint.sh`, starts as root, creates the data directory if
+  needed, gives it and everything in it to the `dnswatcher` user with mode 700
+  on the directory, then runs dnswatcher as that user with `su-exec`. A
+  bind-mounted host directory no longer has to be chowned first (closes #166).
+- 2026-09-29: `.golangci.yml` re-fetched unchanged from `sneak/prompts`. It
+  replaces the deprecated `gomodguard` with `gomodguard_v2`, so `make lint` no
+  longer warns about it, and turns on `depguard` with the org `test-support`
+  rule, which rejects `net/http/httptest` except in test files and in files
+  under a directory whose name ends in `test`. This repo had no `deny` entries
+  of its own to carry forward (closes #123).
+- 2026-09-29: nothing stands in for DNS any more. Watcher tests that look
+  something up in DNS use the real resolver against live DNS servers and test
+  record and nameserver changes by preparing the saved state a check starts
+  from; the resolver timeout test queries an address that never answers, and
+  `NewFromLoggerWithClient`, used only by its stand-in client, is gone. The
+  live-DNS retry and concurrency limit moved to `internal/livedns`, which both
+  test packages use. `TESTING.md` states the README's rule (closes #159).
 - 2026-09-28: the inconsistency alert is sent once, on the check where two
   nameservers start to disagree or where a nameserver that disagrees first
   appears, instead of on every check while they disagree, and not again after
@@ -268,4 +275,5 @@ Infrastructure notes (from untracked TODO.md):
 - Module path sneak.berlin/go/dnswatcher differs from the git.eeqj.de
   remote intentionally; do not "fix" it
 - Dependencies: github.com/miekg/dns, golang.org/x/net/publicsuffix
-- Tests use live DNS and never mock it (README, "No DNS mocking. Ever.")
+- DNS is never mocked; tests that look something up in DNS query live DNS
+  servers (README, "No DNS mocking. Ever.")

deploy/docker-entrypoint.sh

@@ -0,0 +1,17 @@
+#!/bin/sh
+# deploy/docker-entrypoint.sh: the Docker image's ENTRYPOINT. It runs as
+# root only to give the data directory to the dnswatcher user: a host
+# directory bind-mounted there keeps its host owner, often root, and may
+# hold a state file left by another uid, which dnswatcher could neither
+# read nor replace. dnswatcher itself always runs as the dnswatcher user.
+set -eu
+
+main() {
+    dir="${DNSWATCHER_DATA_DIR:-/var/lib/dnswatcher}"
+    mkdir -p "$dir"
+    chown -R dnswatcher:dnswatcher "$dir"
+    chmod 700 "$dir"
+    exec su-exec dnswatcher /usr/local/bin/dnswatcher "$@"
+}
+
+main "$@"

internal/livedns/livedns.go

@@ -1,5 +1,5 @@
-// Package livedns runs the live DNS operations of tests. Every test in
-// this project that needs DNS resolves against the real, live DNS —
+// Package livedns runs the live DNS operations of tests. Tests that
+// look something up in DNS query live DNS servers, never a stand-in —
 // see TESTING.md. Nothing here mocks, fakes, stubs, records or replays
 // DNS, and nothing here skips a test: it only changes *how* the live
 // queries are issued, so that a single dropped UDP packet or one slow
@@ -16,10 +16,12 @@
 //     operations are in flight at once in one test binary.
 //
 //  2. Retry with exponential backoff. Each live operation gets several
-//     attempts with its own timeout. The retry condition is strictly
-//     transport-level — "did a nameserver answer at all" — never the
-//     assertion the test is making. Code that answers incorrectly
-//     still fails on the first attempt.
+//     attempts with its own timeout. An attempt is retried when it
+//     obtained nothing to check, never because of what the test
+//     asserts about the result, so a wrong result still fails on the
+//     first attempt. A fault in the code under test that leaves
+//     nothing to check looks the same as live DNS not answering, and
+//     fails only after the last attempt.
 package livedns
 
 import (
@@ -113,7 +115,7 @@ func Retry(
 	}
 
 	t.Fatalf(
-		"%s: no answer after %d live attempts: %v",
+		"%s: all %d live attempts failed: %v",
 		what, attempts, last,
 	)
 }

internal/resolver/livedns_test.go

@@ -17,11 +17,12 @@ import (
 // Live DNS test support
 // ----------------------------------------------------------------
 //
-// Every test in this package resolves against the real, live DNS —
-// see TESTING.md. Each live operation below goes through
-// livedns.Retry, which bounds how many resolutions are in flight at
-// once and retries an operation that got no answer (see package
-// livedns).
+// Tests that look something up in DNS query live DNS servers, never a
+// stand-in; logic that works on record data may be tested on that
+// data with no lookup (see TESTING.md). Each live operation below goes
+// through livedns.Retry, which bounds how many resolutions are in
+// flight at once and retries an operation that got no answer (see
+// package livedns).
 //
 // Where an assertion spans several independent nameservers, a quorum
 // is enough: a strict majority answering as expected. A server that

internal/resolver/resolver_test.go

@@ -32,8 +32,8 @@ func newTestResolver(t *testing.T) *resolver.Resolver {
 }
 
 // findOneNSForDomain picks one authoritative nameserver to aim a
-// test at. Live-DNS retry, concurrency and quorum handling live in
-// livedns_test.go.
+// test at. Quorum handling lives in livedns_test.go, and the live-DNS
+// retry and concurrency limit in package livedns.
 func findOneNSForDomain(
 	t *testing.T,
 	r *resolver.Resolver,
@@ -528,8 +528,10 @@ func TestQueryNameserverIP_Timeout(t *testing.T) {
 	r := newTestResolver(t)
 
 	// Nothing answers at 192.0.2.1, a documentation address. The
-	// deadline must outlast one query timeout (two seconds): a query
-	// cut short by the deadline itself is not reported as a timeout.
+	// resolver tries each query twice, and the first try gives up
+	// after two seconds. A deadline that ends during the first try
+	// makes the status vary from run to run between nodata and
+	// timeout, so the deadline must outlast the first try.
 	ctx, cancel := context.WithTimeout(
 		context.Background(), 3*time.Second,
 	)

internal/watcher/watcher_test.go

@@ -19,9 +19,10 @@ import (
 )
 
 // The watcher looks these names up in live DNS with the real resolver,
-// so tests assert on notifications and saved state, never on the
-// records these zones publish. testHost's addresses stay the same from
-// one check to the next, which the tests that check it twice rely on.
+// so tests assert on what the watcher does with the answers, never on
+// the records these zones publish. testHost's nameservers and addresses
+// stay the same from one check to the next, which the tests that check
+// it twice rely on.
 const (
 	testDomain = "google.com"
 	testHost   = "cloudflare.com"
@@ -38,7 +39,8 @@ const (
 
 // --- Stand-ins for the port checker, TLS checker and notifier ---
 //
-// DNS has none: the watcher uses the real resolver (see TESTING.md).
+// DNS has none: the watchers built here use the real resolver (see
+// TESTING.md).
 
 // mockPortChecker reports every port open until closed is set.
 type mockPortChecker struct {
@@ -171,11 +173,10 @@ func defaultTestConfig(t *testing.T) *config.Config {
 	}
 }
 
-// checkOnce runs the watcher's checks once and returns
-// livedns.ErrNoAnswer when live DNS did not answer for a configured
-// name. The watcher saves a name's hostname state only when all of the
-// name's lookups succeed, so live DNS answered for a name when this
-// check saved its hostname state and that state holds an address.
+// checkOnce runs the watcher's checks once and returns an error when a
+// configured name has no hostname state saved by this check, or that
+// state holds no address. Either live DNS gave no answer for the name,
+// or the watcher saved no fresh result for it.
 func checkOnce(
 	ctx context.Context,
 	w *watcher.Watcher,
@@ -191,53 +192,53 @@ func checkOnce(
 		hs, ok := deps.state.GetHostnameState(name)
 		if !ok || hs.LastChecked.Before(started) ||
 			len(addresses(hs)) == 0 {
-			return fmt.Errorf("%w: %s", livedns.ErrNoAnswer, name)
+			return fmt.Errorf(
+				"%s: %w, or the watcher saved no fresh "+
+					"result for it",
+				name, livedns.ErrNoAnswer,
+			)
 		}
 	}
 
 	return nil
 }
 
-// runFirstCheck builds a watcher, lets prepare set up the saved state
-// and stand-ins it starts from, and runs its checks once against live
-// DNS. When live DNS does not answer, the watcher is thrown away and
-// built again, so a failed attempt leaves nothing behind in the state
-// or the notifications.
-func runFirstCheck(
+// runChecks builds a watcher, lets prepare set up the saved state and
+// stand-ins it starts from, and runs its checks once against live DNS.
+// If change is not nil, change then alters the saved state or stand-ins
+// and the checks run a second time. When either check finds no fresh
+// address for a name (see checkOnce), the watcher is thrown away and
+// all of this runs again on a new one, so a failed attempt leaves
+// nothing behind in the saved state, the stand-ins or the notifications.
+func runChecks(
 	t *testing.T,
 	cfg *config.Config,
-	prepare func(deps *testDeps),
-) (*watcher.Watcher, *testDeps) {
+	prepare, change func(deps *testDeps),
+) *testDeps {
 	t.Helper()
 
-	var (
-		w    *watcher.Watcher
-		deps *testDeps
-	)
+	var deps *testDeps
+
+	livedns.Retry(t, "watcher checks", func(ctx context.Context) error {
+		var w *watcher.Watcher
 
-	livedns.Retry(t, "first check", func(ctx context.Context) error {
 		w, deps = newTestWatcher(t, cfg)
 
 		if prepare != nil {
 			prepare(deps)
 		}
 
+		err := checkOnce(ctx, w, deps)
+		if err != nil || change == nil {
+			return err
+		}
+
+		change(deps)
+
 		return checkOnce(ctx, w, deps)
 	})
 
-	return w, deps
-}
-
-// runCheck runs the watcher's checks once more against live DNS,
-// repeating them while live DNS does not answer. A failed lookup keeps
-// the name's saved records, so a repeat compares against the same
-// saved state.
-func runCheck(t *testing.T, w *watcher.Watcher, deps *testDeps) {
-	t.Helper()
-
-	livedns.Retry(t, "check", func(ctx context.Context) error {
-		return checkOnce(ctx, w, deps)
-	})
+	return deps
 }
 
 // addresses returns the A and AAAA values saved for a hostname.
@@ -295,7 +296,7 @@ func TestFirstRunBaseline(t *testing.T) {
 	cfg.Domains = []string{testDomain}
 	cfg.Hostnames = []string{testHost}
 
-	_, deps := runFirstCheck(t, cfg, nil)
+	deps := runChecks(t, cfg, nil, nil)
 
 	assertNoNotifications(t, deps)
 	assertStatePopulated(t, deps)
@@ -347,7 +348,7 @@ func TestDomainPortAndTLSChecks(t *testing.T) {
 	cfg := defaultTestConfig(t)
 	cfg.Domains = []string{testDomain}
 
-	_, deps := runFirstCheck(t, cfg, nil)
+	deps := runChecks(t, cfg, nil, nil)
 
 	snap := deps.state.GetSnapshot()
 
@@ -387,11 +388,11 @@ func TestNSChangeDetection(t *testing.T) {
 	cfg.Domains = []string{testDomain}
 
 	// The saved state lists nameservers that live DNS does not.
-	_, deps := runFirstCheck(t, cfg, func(deps *testDeps) {
+	deps := runChecks(t, cfg, func(deps *testDeps) {
 		deps.state.SetDomainState(testDomain, &state.DomainState{
 			Nameservers: []string{oldNS1, oldNS2},
 		})
-	})
+	}, nil)
 
 	assertNotified(t, deps, "NS Change: "+testDomain, "warning")
 
@@ -407,17 +408,16 @@ func TestRecordChangeDetection(t *testing.T) {
 	cfg := defaultTestConfig(t)
 	cfg.Hostnames = []string{testHost}
 
-	w, deps := runFirstCheck(t, cfg, nil)
+	// Between the checks, save for every nameserver an address live DNS
+	// never returns.
+	deps := runChecks(t, cfg, nil, func(deps *testDeps) {
+		hs, _ := deps.state.GetHostnameState(testHost)
+		for _, nsState := range hs.RecordsByNameserver {
+			nsState.Records = map[string][]string{"A": {oldIP}}
+		}
 
-	// Save, for every nameserver, an address live DNS never returns.
-	hs, _ := deps.state.GetHostnameState(testHost)
-	for _, nsState := range hs.RecordsByNameserver {
-		nsState.Records = map[string][]string{"A": {oldIP}}
-	}
-
-	deps.state.SetHostnameState(testHost, hs)
-
-	runCheck(t, w, deps)
+		deps.state.SetHostnameState(testHost, hs)
+	})
 
 	assertNotified(t, deps, "Record Change: "+testHost, "warning")
 }
@@ -428,13 +428,12 @@ func TestPortStateChange(t *testing.T) {
 	cfg := defaultTestConfig(t)
 	cfg.Hostnames = []string{testHost}
 
-	w, deps := runFirstCheck(t, cfg, nil)
-
-	deps.portChecker.mu.Lock()
-	deps.portChecker.closed = true
-	deps.portChecker.mu.Unlock()
-
-	runCheck(t, w, deps)
+	// Between the checks, every port closes.
+	deps := runChecks(t, cfg, nil, func(deps *testDeps) {
+		deps.portChecker.mu.Lock()
+		deps.portChecker.closed = true
+		deps.portChecker.mu.Unlock()
+	})
 
 	hs, _ := deps.state.GetHostnameState(testHost)
 	assertNotified(
@@ -454,7 +453,7 @@ func TestTLSExpiryWarning(t *testing.T) {
 	cfg := defaultTestConfig(t)
 	cfg.Hostnames = []string{testHost}
 
-	_, deps := runFirstCheck(t, cfg, expiresInThreeDays)
+	deps := runChecks(t, cfg, expiresInThreeDays, nil)
 
 	assertNotified(t, deps, "TLS Expiry Warning: "+testHost, "warning")
 }
@@ -466,18 +465,19 @@ func TestTLSExpiryWarningDedup(t *testing.T) {
 	cfg.Hostnames = []string{testHost}
 	cfg.TLSInterval = 24 * time.Hour
 
-	w, deps := runFirstCheck(t, cfg, expiresInThreeDays)
-
 	title := "TLS Expiry Warning: " + testHost
 
-	warnings := countNotifications(deps, title)
-	if warnings == 0 {
-		t.Fatal("expected expiry warnings from the first check")
-	}
-
 	// The second check comes within the TLS interval of the first,
 	// so it must not warn again.
-	runCheck(t, w, deps)
+	var warnings int
+
+	deps := runChecks(t, cfg, expiresInThreeDays, func(deps *testDeps) {
+		warnings = countNotifications(deps, title)
+	})
+
+	if warnings == 0 {
+		t.Fatal("expected expiry warnings from the first check")
+	}
 
 	got := countNotifications(deps, title)
 	if got != warnings {
@@ -525,7 +525,7 @@ func TestDNSRunsBeforePortAndTLSChecks(t *testing.T) {
 	cfg.Hostnames = []string{testHost}
 
 	// The saved state says the last check found testHost at oldIP.
-	_, deps := runFirstCheck(t, cfg, func(deps *testDeps) {
+	deps := runChecks(t, cfg, func(deps *testDeps) {
 		deps.state.SetHostnameState(testHost, &state.HostnameState{
 			RecordsByNameserver: map[string]*state.NameserverRecordState{
 				oldNS1: {
@@ -534,7 +534,7 @@ func TestDNSRunsBeforePortAndTLSChecks(t *testing.T) {
 				},
 			},
 		})
-	})
+	}, nil)
 
 	snap := deps.state.GetSnapshot()
 
@@ -665,23 +665,21 @@ func TestNSFailureAndRecovery(t *testing.T) {
 	cfg := defaultTestConfig(t)
 	cfg.Hostnames = []string{testHost}
 
-	w, deps := runFirstCheck(t, cfg, nil)
+	// Between the checks, save every nameserver the first check found
+	// as failed, and add, as answering, one that live DNS does not list.
+	deps := runChecks(t, cfg, nil, func(deps *testDeps) {
+		hs, _ := deps.state.GetHostnameState(testHost)
+		for _, nsState := range hs.RecordsByNameserver {
+			nsState.Status = "error"
+		}
 
-	// Save every nameserver the first check found as failed, and add
-	// one that live DNS does not list as having answered.
-	hs, _ := deps.state.GetHostnameState(testHost)
-	for _, nsState := range hs.RecordsByNameserver {
-		nsState.Status = "error"
-	}
+		hs.RecordsByNameserver[oldNS1] = &state.NameserverRecordState{
+			Records: map[string][]string{"A": {oldIP}},
+			Status:  "ok",
+		}
 
-	hs.RecordsByNameserver[oldNS1] = &state.NameserverRecordState{
-		Records: map[string][]string{"A": {oldIP}},
-		Status:  "ok",
-	}
-
-	deps.state.SetHostnameState(testHost, hs)
-
-	runCheck(t, w, deps)
+		deps.state.SetHostnameState(testHost, hs)
+	})
 
 	assertNotified(t, deps, "NS Failure: "+testHost, "error")
 	assertNotified(t, deps, "NS Recovery: "+testHost, "success")