AutistMask/src/shared/uniswap.js

// Decode Uniswap Universal Router execute() calldata into human-readable
// swap details.  Designed to be extended with other DEX decoders later.

const {
    Interface,
    AbiCoder,
    getBytes,
    getAddress,
    formatUnits,
    getCreate2Address,
    keccak256,
    solidityPacked,
} = require("ethers");
const { truncateAmountNeverZero } = require("./amountDisplay");
const {
    resolveTokenDecimals,
    resolveTokenSymbol,
    unknownDecimalsAmount,
} = require("./approvalAmount");
const { NETWORKS } = require("./networks");

const coder = AbiCoder.defaultAbiCoder();

const ROUTER_IFACE = new Interface([
    "function execute(bytes commands, bytes[] inputs, uint256 deadline)",
]);

// The Universal Router releases deployed at the addresses below, each with
// three things read from its source at the commit linked for it:
//
// - `commandTypeMask`, the mask it reads a command's type with: its dispatcher
//   runs `commandType & Commands.COMMAND_TYPE_MASK`, and the bits above the
//   mask are the allow-revert flag (0x80) or ignored. The mask grew between
//   releases. Each is `COMMAND_TYPE_MASK` in the release's
//   `contracts/libraries/Commands.sol`, the same file as in the source
//   verified for its addresses.
// - `commands`, the command it runs for each command type, by the name that
//   file gives it. Releases give some types different commands. A type the
//   file names no command for, or only a placeholder, is left out: the router
//   reverts on it, except UniversalRouterV1_2_V2Support on 0x14, which does
//   nothing. decode() names and reads each step as its release's command.
// - `allowRevert`, the command types it lets fail without reverting the
//   transaction. Its `execute()`, in `contracts/UniversalRouter.sol`, runs each
//   step through `dispatch()`, in `contracts/base/Dispatcher.sol`, and reverts
//   the whole transaction when a step fails, unless the step's command byte
//   has the allow-revert flag set: then it goes on to the next step. Only for
//   these command types does `dispatch()` return a failure. Every other
//   command, among them each V2, V3 and V4 swap and each payment of ETH or an
//   ERC-20 token, succeeds or reverts the whole transaction itself, so the
//   flag has no effect on it.
//
// UniversalRouterV1: https://github.com/Uniswap/universal-router/tree/cda697da221e24ca143bc4f55023694a2a16796f/contracts
const ROUTER_V1 = {
    commandTypeMask: 0x1f,
    commands: {
        0x00: "V3_SWAP_EXACT_IN",
        0x01: "V3_SWAP_EXACT_OUT",
        0x02: "PERMIT2_TRANSFER_FROM",
        0x03: "PERMIT2_PERMIT_BATCH",
        0x04: "SWEEP",
        0x05: "TRANSFER",
        0x06: "PAY_PORTION",
        0x08: "V2_SWAP_EXACT_IN",
        0x09: "V2_SWAP_EXACT_OUT",
        0x0a: "PERMIT2_PERMIT",
        0x0b: "WRAP_ETH",
        0x0c: "UNWRAP_WETH",
        0x0d: "PERMIT2_TRANSFER_FROM_BATCH",
        0x10: "SEAPORT",
        0x11: "LOOKS_RARE_721",
        0x12: "NFTX",
        0x13: "CRYPTOPUNKS",
        0x14: "LOOKS_RARE_1155",
        0x15: "OWNER_CHECK_721",
        0x16: "OWNER_CHECK_1155",
        0x17: "SWEEP_ERC721",
        0x18: "X2Y2_721",
        0x19: "SUDOSWAP",
        0x1a: "NFT20",
        0x1b: "X2Y2_1155",
        0x1c: "FOUNDATION",
        0x1d: "SWEEP_ERC1155",
    },
    // Its NFT market calls (0x10 to 0x14, 0x18 to 0x1c) and NFT owner checks
    // (0x15, 0x16).
    allowRevert: [
        0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x18, 0x19, 0x1a, 0x1b, 0x1c,
    ],
};
// UniversalRouterV1_2_V2Support: https://github.com/Uniswap/universal-router/tree/41183d6eb154f0ab0e74a0e911a5ef9ea51fc4bd/contracts
const ROUTER_V1_2 = {
    commandTypeMask: 0x3f,
    commands: {
        0x00: "V3_SWAP_EXACT_IN",
        0x01: "V3_SWAP_EXACT_OUT",
        0x02: "PERMIT2_TRANSFER_FROM",
        0x03: "PERMIT2_PERMIT_BATCH",
        0x04: "SWEEP",
        0x05: "TRANSFER",
        0x06: "PAY_PORTION",
        0x08: "V2_SWAP_EXACT_IN",
        0x09: "V2_SWAP_EXACT_OUT",
        0x0a: "PERMIT2_PERMIT",
        0x0b: "WRAP_ETH",
        0x0c: "UNWRAP_WETH",
        0x0d: "PERMIT2_TRANSFER_FROM_BATCH",
        0x0e: "BALANCE_CHECK_ERC20",
        0x10: "SEAPORT_V1_5",
        0x11: "LOOKS_RARE_V2",
        0x12: "NFTX",
        0x13: "CRYPTOPUNKS",
        0x15: "OWNER_CHECK_721",
        0x16: "OWNER_CHECK_1155",
        0x17: "SWEEP_ERC721",
        0x18: "X2Y2_721",
        0x19: "SUDOSWAP",
        0x1a: "NFT20",
        0x1b: "X2Y2_1155",
        0x1c: "FOUNDATION",
        0x1d: "SWEEP_ERC1155",
        0x1e: "ELEMENT_MARKET",
        0x20: "SEAPORT_V1_4",
        0x21: "EXECUTE_SUB_PLAN",
        0x22: "APPROVE_ERC20",
    },
    // BALANCE_CHECK_ERC20 (0x0e), its NFT market calls (0x10 to 0x13, 0x18 to
    // 0x1c, 0x1e, 0x20), its NFT owner checks (0x15, 0x16) and
    // EXECUTE_SUB_PLAN (0x21).
    allowRevert: [
        0x0e, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16, 0x18, 0x19, 0x1a, 0x1b, 0x1c,
        0x1e, 0x20, 0x21,
    ],
};
// UniversalRouterV2: https://github.com/Uniswap/universal-router/tree/3663f6db6e2fe121753cd2d899699c2dc75dca86/contracts
const ROUTER_V2 = {
    commandTypeMask: 0x3f,
    commands: {
        0x00: "V3_SWAP_EXACT_IN",
        0x01: "V3_SWAP_EXACT_OUT",
        0x02: "PERMIT2_TRANSFER_FROM",
        0x03: "PERMIT2_PERMIT_BATCH",
        0x04: "SWEEP",
        0x05: "TRANSFER",
        0x06: "PAY_PORTION",
        0x08: "V2_SWAP_EXACT_IN",
        0x09: "V2_SWAP_EXACT_OUT",
        0x0a: "PERMIT2_PERMIT",
        0x0b: "WRAP_ETH",
        0x0c: "UNWRAP_WETH",
        0x0d: "PERMIT2_TRANSFER_FROM_BATCH",
        0x0e: "BALANCE_CHECK_ERC20",
        0x10: "V4_SWAP",
        0x11: "V3_POSITION_MANAGER_PERMIT",
        0x12: "V3_POSITION_MANAGER_CALL",
        0x13: "V4_INITIALIZE_POOL",
        0x14: "V4_POSITION_MANAGER_CALL",
        0x21: "EXECUTE_SUB_PLAN",
    },
    // PERMIT2_PERMIT_BATCH (0x03), PERMIT2_PERMIT (0x0a), BALANCE_CHECK_ERC20
    // (0x0e), V3_POSITION_MANAGER_PERMIT, V3_POSITION_MANAGER_CALL,
    // V4_INITIALIZE_POOL and V4_POSITION_MANAGER_CALL (0x11 to 0x14), and
    // EXECUTE_SUB_PLAN (0x21).
    allowRevert: [0x03, 0x0a, 0x0e, 0x11, 0x12, 0x13, 0x14, 0x21],
};
// UniversalRouterV2_1_1: https://github.com/Uniswap/universal-router/tree/999d561c3ad58fb5cab91b602911f3c75591a9c7/contracts
// UniversalRouterV2_1_2: https://github.com/Uniswap/universal-router/tree/802fe4c18f47300e0f183e2a42e9146ec2ea9fc3/contracts
// The three files are the same in both releases.
const ROUTER_V2_1 = {
    commandTypeMask: 0x7f,
    // UniversalRouterV2's, and two more.
    commands: {
        ...ROUTER_V2.commands,
        0x07: "PAY_PORTION_FULL_PRECISION",
        0x40: "ACROSS_V4_DEPOSIT_V3",
    },
    // The same as UniversalRouterV2's.
    allowRevert: ROUTER_V2.allowRevert,
};

// The Universal Router deployments on each network, by chain id, copied from
// the deployment files Uniswap publishes, each address named by its key there
// and given with the release it runs. The files also list
// `UnsupportedProtocol`, which is not a router.
const ROUTER_ADDRESSES = new Map([
    [
        NETWORKS.mainnet.chainId,
        // https://github.com/Uniswap/universal-router/blob/543e1a19d6e21e31ced2512eec5792b50f13a0ba/deploy-addresses/mainnet.json
        [
            ["0xEf1c6E67703c7BD7107eed8303Fbe6EC2554BF6B", ROUTER_V1], // UniversalRouterV1
            ["0x3fC91A3afd70395Cd496C647d5a6CC9D4B2b7FAD", ROUTER_V1_2], // UniversalRouterV1_2_V2Support
            ["0x66a9893cc07d91d95644aedd05d03f95e1dba8af", ROUTER_V2], // UniversalRouterV2
            ["0x4C82D1fBFe28C977cBB58D8C7FF8FCF9F70a2cCA", ROUTER_V2_1], // UniversalRouterV2_1_1
            ["0x23617e59A5925b2A4Bf75d73ff6711cD0b29De85", ROUTER_V2_1], // UniversalRouterV2_1_2
        ],
    ],
    [
        NETWORKS.sepolia.chainId,
        // https://github.com/Uniswap/universal-router/blob/543e1a19d6e21e31ced2512eec5792b50f13a0ba/deploy-addresses/sepolia.json
        [
            ["0x3fC91A3afd70395Cd496C647d5a6CC9D4B2b7FAD", ROUTER_V1_2], // UniversalRouterV1_2_V2Support
            ["0x3a9d48ab9751398bbfa63ad67599bb04e4bdf98b", ROUTER_V2], // UniversalRouterV2
            ["0x7DfD4F31be6814D2906BDE155c3e1B146EAc1468", ROUTER_V2_1], // UniversalRouterV2_1_1
            ["0x7E4f6c5e954Da5c61B3423D81E2277431Ac043f3", ROUTER_V2_1], // UniversalRouterV2_1_2
        ],
    ],
]);

// The release that the Universal Router deployment at `address` on the
// network with this chain id runs, or null when `address` is not one of them.
// Address case is ignored.
function routerRelease(address, chainId) {
    const routers = ROUTER_ADDRESSES.get(chainId) || [];
    const wanted = (address || "").toLowerCase();
    const router = routers.find(([a]) => a.toLowerCase() === wanted);
    return router ? router[1] : null;
}

// The allow-revert flag on a command byte (see ROUTER_V1).
const ALLOW_REVERT_FLAG = 0x80;

// The Uniswap V2 factory and pair init code hash the Universal Routers on each
// network were deployed with. A V2 swap step swaps through the pair its path
// starts at, which the router finds as `UniswapV2Library.pairFor()` does: the
// CREATE2 address from the factory, with the hash of the path's first two
// tokens, sorted, as salt.
// - pairFor(): https://github.com/Uniswap/universal-router/blob/802fe4c18f47300e0f183e2a42e9146ec2ea9fc3/contracts/modules/uniswap/v2/UniswapV2Library.sol
// - mainnet: https://github.com/Uniswap/universal-router/blob/802fe4c18f47300e0f183e2a42e9146ec2ea9fc3/script/deployParameters/DeployMainnet.s.sol
// - Sepolia: https://github.com/Uniswap/universal-router/blob/802fe4c18f47300e0f183e2a42e9146ec2ea9fc3/script/deployParameters/DeploySepolia.s.sol
// Every router in ROUTER_ADDRESSES was deployed with these (their constructor
// arguments on the explorer), except Sepolia's UniversalRouterV1_2_V2Support,
// which was deployed with two placeholders: the V2 factory
// 0x5302086A3a25d473aAbBd0356eFf8Dd811a4d89B (the `UnsupportedProtocol` its
// deployment file lists) and a zero init code hash. On Sepolia no contract
// sits at a pair any router there finds (the hash below is not that of the
// factory's own pairs), so every V2 swap step they run reverts.
const V2_FACTORIES = new Map([
    [
        NETWORKS.mainnet.chainId,
        {
            v2Factory: "0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f",
            pairInitCodeHash:
                "0x96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f",
        },
    ],
    [
        NETWORKS.sepolia.chainId,
        {
            v2Factory: "0xB7f907f7A9eBC822a80BD25E224be42Ce0A698A0",
            pairInitCodeHash:
                "0x96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f",
        },
    ],
]);

// The address of the V2 pair of `tokenA` and `tokenB` on the network with this
// chain id, found as the router finds it (see V2_FACTORIES).
function v2PairFor(chainId, tokenA, tokenB) {
    const { v2Factory, pairInitCodeHash } = V2_FACTORIES.get(chainId);
    const [token0, token1] =
        tokenA.toLowerCase() < tokenB.toLowerCase()
            ? [tokenA, tokenB]
            : [tokenB, tokenA];
    return getCreate2Address(
        v2Factory,
        keccak256(solidityPacked(["address", "address"], [token0, token1])),
        pairInitCodeHash,
    );
}

// The Steps line's name for each command in the releases' `commands` (see
// ROUTER_V1).
const COMMAND_NAMES = {
    V3_SWAP_EXACT_IN: "V3 Swap (Exact In)",
    V3_SWAP_EXACT_OUT: "V3 Swap (Exact Out)",
    PERMIT2_TRANSFER_FROM: "Permit2 Transfer",
    PERMIT2_PERMIT_BATCH: "Permit2 Permit Batch",
    SWEEP: "Sweep",
    TRANSFER: "Transfer",
    PAY_PORTION: "Pay Portion",
    PAY_PORTION_FULL_PRECISION: "Pay Portion (Full Precision)",
    V2_SWAP_EXACT_IN: "V2 Swap (Exact In)",
    V2_SWAP_EXACT_OUT: "V2 Swap (Exact Out)",
    PERMIT2_PERMIT: "Permit2 Permit",
    WRAP_ETH: "Wrap ETH",
    UNWRAP_WETH: "Unwrap WETH",
    PERMIT2_TRANSFER_FROM_BATCH: "Permit2 Transfer Batch",
    BALANCE_CHECK_ERC20: "Balance Check",
    V4_SWAP: "V4 Swap",
    V3_POSITION_MANAGER_PERMIT: "V3 Position Mgr Permit",
    V3_POSITION_MANAGER_CALL: "V3 Position Mgr Call",
    V4_INITIALIZE_POOL: "V4 Initialize Pool",
    V4_POSITION_MANAGER_CALL: "V4 Position Mgr Call",
    EXECUTE_SUB_PLAN: "Execute Sub-Plan",
    ACROSS_V4_DEPOSIT_V3: "Across Bridge Deposit",
    // The NFT commands of UniversalRouterV1 and UniversalRouterV1_2_V2Support,
    // and the latter's APPROVE_ERC20.
    SEAPORT: "Seaport",
    SEAPORT_V1_4: "Seaport V1.4",
    SEAPORT_V1_5: "Seaport V1.5",
    LOOKS_RARE_721: "LooksRare 721",
    LOOKS_RARE_1155: "LooksRare 1155",
    LOOKS_RARE_V2: "LooksRare V2",
    NFTX: "NFTX",
    CRYPTOPUNKS: "CryptoPunks",
    OWNER_CHECK_721: "Owner Check 721",
    OWNER_CHECK_1155: "Owner Check 1155",
    SWEEP_ERC721: "Sweep ERC-721",
    SWEEP_ERC1155: "Sweep ERC-1155",
    X2Y2_721: "X2Y2 721",
    X2Y2_1155: "X2Y2 1155",
    SUDOSWAP: "Sudoswap",
    NFT20: "NFT20",
    FOUNDATION: "Foundation",
    ELEMENT_MARKET: "Element Market",
    APPROVE_ERC20: "Approve ERC-20",
};

// The swap's Amount and Min. received lines land on the same approval screen,
// and Amount is carried to the wait/success/error screens as the ERC-20 line
// is, so they take the same nonzero floor: a swap of an amount below 0.0001 is
// not "0.0000", and a slippage floor of one base unit does not read as "you may
// receive nothing".
function formatAmount(raw, decimals) {
    return truncateAmountNeverZero(formatUnits(raw, decimals));
}

// One wording for either side of the screen: a currency the calldata never
// named. It reads as a refusal, the same stance unknownDecimalsAmount() takes
// on a scale — not as a token name, and not as a quantity. The Paid to line
// uses it too, when no step names anyone paid.
const UNNAMED_CURRENCY = "Unknown (not named in the calldata)";

// The same refusal when a V4 swap action could not be read (see
// decodeExactly()), or the transaction has an EXECUTE_SUB_PLAN step, whose
// commands this decoder does not read. That action names both of its
// currencies, and those commands may name one, so saying the calldata did not
// name it would be false. The Paid to line uses it too, when a step may pay an
// address this decoder did not read.
const UNDECODED_CURRENCY = "Unknown (could not be decoded)";

// The Paid to line for each token paid to the router, the swap's output or
// another, that no later step pays out of the router.
const STAYS_IN_ROUTER =
    "The router, where it stays (no later step pays it out)";

// The Paid to line for an ACROSS_V4_DEPOSIT_V3 step (see
// decodeAcrossV4DepositV3()).
const PAID_TO_BRIDGE =
    "The bridge, which pays the deposit's recipient on another network";

// Explicit presence, never truthiness. Every gate in this file that guards a
// decoded value goes through here: an address is never falsy once set, but an
// amount of 0n is, and a gate that cannot tell a genuine zero from an absent
// value is the trap this decoder has now been bitten by five times.
function present(value) {
    return value !== null && value !== undefined;
}

// Uniswap V4 spells "use the whole open delta" as an amount of zero:
// v4-periphery `src/libraries/ActionConstants.sol` declares
// `uint128 internal constant OPEN_DELTA = 0` ("used to signal that an action
// should use the input value of the open delta on the pool manager or of the
// balance that the contract holds"), and `src/V4Router.sol` substitutes the
// full open credit whenever an exact-in swap action's `amountIn` equals it:
//
//     uint128 amountIn = params.amountIn;
//     if (amountIn == ActionConstants.OPEN_DELTA) {
//         amountIn = _getFullCredit(...).toUint128();
//     }
//
// in both `_swapExactInputSingle` and `_swapExactInput`. Sentinel and literal
// zero are the same uint128 word, so the encoding CANNOT distinguish them —
// and the router does not try: it reads every zero as the sentinel, so in V4
// there is no such thing as an exact-in swap of literally zero. The amount is
// therefore not stated by the calldata at all; it is whatever credit is open
// at execution time. It is carried as this sentinel rather than as 0n because
// printing "0.0000" would state the exact inverse of what will happen —
// "nothing is being swapped" for a step that swaps the entire balance.
//
// `amountOutMinimum` gets no such mapping: V4Router compares it directly
// (`if (amountOut < params.amountOutMinimum) revert V4TooLittleReceived`), so
// a zero minimum is a literal zero slippage floor and is stated as one. Nor
// does the V3 path have it — universal-router's `V3SwapRouter.v3SwapExactInput`
// special-cases only `ActionConstants.CONTRACT_BALANCE` (1<<255), never zero —
// so a zero V3 `amountIn` is a literal zero and is displayed as one. The V2
// exact-in path gives zero a meaning of its own: see ALREADY_PAID.
const OPEN_DELTA = Symbol("v4-open-delta");

// The Universal Router's V2 exact-in spells "the pair already holds the input
// tokens" as an amount of zero: universal-router
// `contracts/libraries/Constants.sol` declares
// `uint256 internal constant ALREADY_PAID = 0` ("Used for identifying cases
// when a v2 pair has already received input tokens"), and
// `V2SwapRouter.v2SwapExactInput` makes no payment of its own when `amountIn`
// equals it. The swap then spends whatever an earlier step sent to the pair.
// As with OPEN_DELTA, the calldata states no quantity, and "0.0000" would say
// that nothing is swapped.
const ALREADY_PAID = Symbol("v2-already-paid");

// The router's whole-balance amount, universal-router
// `ActionConstants.CONTRACT_BALANCE`: a V2 exact-in given it as `amountIn`
// pays the pair all the router holds of the input token.
const CONTRACT_BALANCE = 2n ** 255n;

// The amount lines that state a fact instead of a quantity. Same register as
// UNNAMED_CURRENCY — a sentence in the value slot, so it cannot be misread as a
// number — and deliberately not another phrasing of "not named": these say
// different things.
const OPEN_DELTA_AMOUNT = "All available (V4 open delta)";
const ALREADY_PAID_AMOUNT =
    "Whatever an earlier step sent to the pair (V2 already paid)";
const NO_MINIMUM = "None (no minimum guaranteed)";

// Permit2 amounts are uint160; the maximum is Permit2's "unbounded".
const MAX_UINT160 = BigInt("0xffffffffffffffffffffffffffffffffffffffff");

// WETH, the token WRAP_ETH turns ETH into and UNWRAP_WETH turns into ETH, on
// each network, by chain id: `weth9` in the deployment parameters
// V2_FACTORIES cites, which every router in ROUTER_ADDRESSES was deployed
// with (their constructor arguments on the explorer).
const WETH = new Map([
    [NETWORKS.mainnet.chainId, "0xc02aaa39b223fe8d0a0e5c4f27ead9083c756cc2"],
    [NETWORKS.sepolia.chainId, "0xfff9976782d46cc05630d1f6ebab18b2324d6b14"],
]);
// Either one counts on either network as the WETH UNWRAP_WETH turns into ETH.
const WETH_ADDRESSES = [...WETH.values()];

// Two recipient values the router reads as placeholders, not as addresses:
// MSG_SENDER pays the caller of execute(), which is the transaction's sender,
// and ADDRESS_THIS pays the router itself, which holds what it is paid until a
// later step pays it out. The swap commands, SWEEP, WRAP_ETH, UNWRAP_WETH,
// TRANSFER, PAY_PORTION, PAY_PORTION_FULL_PRECISION and, on every router but
// UniversalRouterV1, PERMIT2_TRANSFER_FROM map their recipient through the
// dispatcher's map(), and a V4 TAKE and TAKE_PORTION through V4Router's
// _mapRecipient(); TAKE_ALL always pays the caller.
// - constants: https://github.com/Uniswap/universal-router/blob/cda697da221e24ca143bc4f55023694a2a16796f/contracts/libraries/Constants.sol
// - map(), UniversalRouterV1: https://github.com/Uniswap/universal-router/blob/cda697da221e24ca143bc4f55023694a2a16796f/contracts/libraries/Recipient.sol
// - map(), UniversalRouterV2: https://github.com/Uniswap/universal-router/blob/3663f6db6e2fe121753cd2d899699c2dc75dca86/contracts/base/Dispatcher.sol
// - constants, V4: https://github.com/Uniswap/v4-periphery/blob/444c526b77d804590f0d7bc5a481af5a3277c952/src/libraries/ActionConstants.sol
// - _mapRecipient(): https://github.com/Uniswap/v4-periphery/blob/444c526b77d804590f0d7bc5a481af5a3277c952/src/base/BaseActionsRouter.sol
// - TAKE, TAKE_ALL and TAKE_PORTION: https://github.com/Uniswap/v4-periphery/blob/444c526b77d804590f0d7bc5a481af5a3277c952/src/V4Router.sol
const MSG_SENDER = "0x0000000000000000000000000000000000000001";
const ADDRESS_THIS = "0x0000000000000000000000000000000000000002";

// `decimals` is null when nothing knows this token's scale. It is not
// defaulted to 18: the swap lines land on the same approval screen as the
// ERC-20 line, and a scale guessed there is what showed a 1,000 USDT swap as
// 0.000000000001. `sources` is { trackedTokens, wallets }, shaped as they are
// on `state`; resolveTokenDecimals() reads the bundled list, then those.
//
// A null `address` means UNDETERMINED — the calldata named no currency for
// that side — and is refused rather than named. It is not native ETH: Uniswap
// V4 spells native ETH as `Currency.wrap(address(0))` (v4-core
// `type Currency is address`), and a Currency is ABI-encoded as a plain
// address word, so every decode site here gets back the truthy string
// "0x0000000000000000000000000000000000000000" for it — never null. WRAP_ETH
// sets that same explicit zero address, and an UNWRAP_WETH output is caught by
// its caller before this is consulted, so nothing that genuinely is ETH
// arrives null. Naming a null ETH states the wrong asset and formats its
// amount at the wrong scale.
function tokenInfo(address, sources) {
    if (!address) {
        return { symbol: null, decimals: null, address: null };
    }
    if (address === "0x0000000000000000000000000000000000000000") {
        return { symbol: "ETH", decimals: 18, address: null };
    }
    return {
        symbol: resolveTokenSymbol(address, sources),
        decimals: resolveTokenDecimals(address, sources),
        address,
    };
}

// A swap amount line. With a scale it is the token quantity; with none it is
// the base-unit integer with the unknown scale stated, the same refusal the
// ERC-20 amount line makes, so the screen has one way of saying it. `display`
// is the line on the screen, `raw` is what the status screens carry.
function amountText(raw, info) {
    if (info.decimals === null) {
        const unknown = unknownDecimalsAmount(raw);
        return { raw: unknown, display: unknown };
    }
    const formatted = formatAmount(raw, info.decimals);
    return {
        raw: formatted,
        display: formatted + (info.symbol ? " " + info.symbol : ""),
    };
}

// The line giving a moved token under `label`, in the shape of the Token In
// line, so the screens show it as they show that one. ETH has no address.
function tokenMovedLine(label, token, sources) {
    const info = tokenInfo(token, sources);
    if (!present(info.address)) {
        return { label, value: info.symbol };
    }
    return {
        label,
        value: info.symbol ? info.symbol + " (" + token + ")" : token,
        address: token,
        isToken: true,
    };
}

// Decode PERMIT2_PERMIT (command 0x0a) input bytes.
// ABI: ((address token, uint160 amount, uint48 expiration, uint48 nonce),
//        address spender, uint256 sigDeadline), bytes signature
function decodePermit2(input) {
    try {
        const d = coder.decode(
            [
                "tuple(tuple(address,uint160,uint48,uint48),address,uint256)",
                "bytes",
            ],
            input,
        );
        return { token: d[0][0][0], amount: d[0][0][1], spender: d[0][1] };
    } catch {
        return null;
    }
}

// Decode BALANCE_CHECK_ERC20 (command 0x0e) input bytes. The router passes the
// check when `owner` holds at least `minBalance` of `token`, and reads `owner`
// as written, without map(), on every release that has the command:
// - UniversalRouterV1_2_V2Support: https://github.com/Uniswap/universal-router/blob/41183d6eb154f0ab0e74a0e911a5ef9ea51fc4bd/contracts/base/Dispatcher.sol
// - UniversalRouterV2: https://github.com/Uniswap/universal-router/blob/3663f6db6e2fe121753cd2d899699c2dc75dca86/contracts/base/Dispatcher.sol
// - UniversalRouterV2_1_1 and UniversalRouterV2_1_2, the same file at both
//   commits: https://github.com/Uniswap/universal-router/blob/802fe4c18f47300e0f183e2a42e9146ec2ea9fc3/contracts/base/Dispatcher.sol
// ABI: (address owner, address token, uint256 minBalance)
function decodeBalanceCheck(input) {
    try {
        const d = coder.decode(["address", "address", "uint256"], input);
        return { owner: d[0], token: d[1], minBalance: d[2] };
    } catch {
        return null;
    }
}

// Decode V2_SWAP_EXACT_IN (command 0x08) input bytes.
// ABI: (address recipient, uint256 amountIn, uint256 amountOutMin,
//        address[] path, bool payerIsUser)
// A zero `amountIn` is read the way the router reads it, as ALREADY_PAID.
// With `payerIsUser` false the router pays the input from its own balance.
function decodeV2SwapExactIn(input) {
    try {
        const d = coder.decode(
            ["address", "uint256", "uint256", "address[]", "bool"],
            input,
        );
        return {
            recipient: d[0],
            amountIn: d[1] === 0n ? ALREADY_PAID : d[1],
            amountOutMin: d[2],
            path: d[3],
            tokenIn: d[3][0],
            tokenOut: d[3][d[3].length - 1],
            payerIsUser: d[4],
        };
    } catch {
        return null;
    }
}

// Decode V2_SWAP_EXACT_OUT (command 0x09) input bytes.
// ABI: (address recipient, uint256 amountOut, uint256 amountInMax,
//        address[] path, bool payerIsUser)
function decodeV2SwapExactOut(input) {
    try {
        const d = coder.decode(
            ["address", "uint256", "uint256", "address[]", "bool"],
            input,
        );
        return {
            recipient: d[0],
            amountOut: d[1],
            amountInMax: d[2],
            tokenIn: d[3][0],
            tokenOut: d[3][d[3].length - 1],
        };
    } catch {
        return null;
    }
}

// Decode V3 swap path (packed: token(20) + fee(3) + token(20) ...)
function decodeV3Path(pathHex) {
    const hex = pathHex.startsWith("0x") ? pathHex.slice(2) : pathHex;
    if (hex.length < 40) return null;
    const tokenIn = "0x" + hex.slice(0, 40);
    const tokenOut = "0x" + hex.slice(-40);
    return { tokenIn, tokenOut };
}

// Decode V3_SWAP_EXACT_IN (command 0x00) input bytes.
// ABI: (address recipient, uint256 amountIn, uint256 amountOutMin,
//        bytes path, bool payerIsUser)
// With `payerIsUser` false the router pays the input from its own balance.
function decodeV3SwapExactIn(input) {
    try {
        const d = coder.decode(
            ["address", "uint256", "uint256", "bytes", "bool"],
            input,
        );
        const path = decodeV3Path(d[3]);
        if (!path) return null;
        return {
            recipient: d[0],
            amountIn: d[1],
            amountOutMin: d[2],
            tokenIn: path.tokenIn,
            tokenOut: path.tokenOut,
            payerIsUser: d[4],
        };
    } catch {
        return null;
    }
}

// Decode SWEEP (command 0x04) input bytes. The router pays its whole balance
// of `token` to the recipient.
// ABI: (address token, address recipient, uint256 amountMin)
function decodeSweep(input) {
    try {
        const d = coder.decode(["address", "address", "uint256"], input);
        return { token: d[0], recipient: d[1] };
    } catch {
        return null;
    }
}

// TRANSFER, PAY_PORTION, PAY_PORTION_FULL_PRECISION and PERMIT2_TRANSFER_FROM
// read their parameters as each release's dispatcher reads them:
// - UniversalRouterV1: https://github.com/Uniswap/universal-router/blob/cda697da221e24ca143bc4f55023694a2a16796f/contracts/base/Dispatcher.sol
// - UniversalRouterV1_2_V2Support: https://github.com/Uniswap/universal-router/blob/41183d6eb154f0ab0e74a0e911a5ef9ea51fc4bd/contracts/base/Dispatcher.sol
// - UniversalRouterV2: https://github.com/Uniswap/universal-router/blob/3663f6db6e2fe121753cd2d899699c2dc75dca86/contracts/base/Dispatcher.sol
// - UniversalRouterV2_1_1: https://github.com/Uniswap/universal-router/blob/999d561c3ad58fb5cab91b602911f3c75591a9c7/contracts/base/Dispatcher.sol
// - UniversalRouterV2_1_2: https://github.com/Uniswap/universal-router/blob/802fe4c18f47300e0f183e2a42e9146ec2ea9fc3/contracts/base/Dispatcher.sol

// Decode TRANSFER (command 0x05) input bytes, and those of PAY_PORTION (0x06)
// and PAY_PORTION_FULL_PRECISION (0x07), which share its layout. Each pays
// `token` out of the router to the recipient. TRANSFER pays `amount`, or, of a
// token other than ETH, all the router holds when `amount` is
// CONTRACT_BALANCE; it sends ETH as written, so a TRANSFER of
// CONTRACT_BALANCE of ETH (`token` the zero address) always reverts.
// PAY_PORTION pays `amount` ten-thousandths of what the router holds, and
// PAY_PORTION_FULL_PRECISION `amount` 1e18ths of it, of ETH too.
// - UniversalRouterV1: https://github.com/Uniswap/universal-router/blob/cda697da221e24ca143bc4f55023694a2a16796f/contracts/modules/Payments.sol
// - UniversalRouterV2_1_2: https://github.com/Uniswap/universal-router/blob/802fe4c18f47300e0f183e2a42e9146ec2ea9fc3/contracts/modules/Payments.sol
// ABI: (address token, address recipient, uint256 amount)
function decodeTransfer(input) {
    try {
        const d = coder.decode(["address", "address", "uint256"], input);
        return { token: d[0], recipient: d[1], amount: d[2] };
    } catch {
        return null;
    }
}

// Decode PERMIT2_TRANSFER_FROM (command 0x02) input bytes. Permit2 moves
// `amount` of `token` from the transaction's sender to the recipient.
// UniversalRouterV1 hands Permit2 the recipient as written, without map(), so
// on that router address(1) and address(2) are paid as those addresses.
// ABI: (address token, address recipient, uint160 amount)
function decodePermit2TransferFrom(input) {
    try {
        const d = coder.decode(["address", "address", "uint160"], input);
        return { token: d[0], recipient: d[1], amount: d[2] };
    } catch {
        return null;
    }
}

// Decode ACROSS_V4_DEPOSIT_V3 (command 0x40) input bytes. The router hands
// the bridge `inputAmount` of `inputToken`, or all it holds of it when that is
// CONTRACT_BALANCE; with `useNative` set it hands over its ETH instead. It
// passes `depositor` and `recipient` on as written, without map(). The bridge
// pays the recipient on another network what the deposit states, and refunds
// a deposit nobody fills to the depositor, who may also change the deposit's
// recipient.
// - UniversalRouterV2_1_1: https://github.com/Uniswap/universal-router/blob/999d561c3ad58fb5cab91b602911f3c75591a9c7/contracts/modules/ChainedActions.sol
// - UniversalRouterV2_1_2: https://github.com/Uniswap/universal-router/blob/802fe4c18f47300e0f183e2a42e9146ec2ea9fc3/contracts/modules/ChainedActions.sol
// - parameters, the same at both commits: https://github.com/Uniswap/universal-router/blob/802fe4c18f47300e0f183e2a42e9146ec2ea9fc3/contracts/interfaces/IUniversalRouter.sol
// - the bridge's depositV3() and its refund to the depositor: https://github.com/across-protocol/contracts/blob/950e9154f3d61e59590eb7d4403fae5d3cae84f8/contracts/spoke-pools/SpokePool.sol
// ABI: (tuple(address depositor, address recipient, address inputToken,
//        address outputToken, uint256 inputAmount, uint256 outputAmount,
//        uint256 destinationChainId, address exclusiveRelayer,
//        uint32 quoteTimestamp, uint32 fillDeadline,
//        uint32 exclusivityDeadline, bytes message, bool useNative))
function decodeAcrossV4DepositV3(input) {
    try {
        const d = coder.decode(
            [
                "tuple(address,address,address,address,uint256,uint256,uint256,address,uint32,uint32,uint32,bytes,bool)",
            ],
            input,
        );
        return {
            depositor: d[0][0],
            recipient: d[0][1],
            inputToken: d[0][2],
            inputAmount: d[0][4],
            useNative: d[0][12],
        };
    } catch {
        return null;
    }
}

// Decode WRAP_ETH (command 0x0b) input bytes. The router pays the WETH to the
// recipient.
// ABI: (address recipient, uint256 amount)
function decodeWrapEth(input) {
    try {
        const d = coder.decode(["address", "uint256"], input);
        return { recipient: d[0], amount: d[1] };
    } catch {
        return null;
    }
}

// Decode UNWRAP_WETH (command 0x0c) input bytes. The router turns its whole
// WETH balance into ETH and pays it to the recipient.
// ABI: (address recipient, uint256 amountMin)
function decodeUnwrapWeth(input) {
    try {
        const d = coder.decode(["address", "uint256"], input);
        return { recipient: d[0] };
    } catch {
        return null;
    }
}

// V4 inner action IDs
const V4_SWAP_EXACT_IN_SINGLE = 0x06;
const V4_SWAP_EXACT_IN = 0x07;
const V4_SWAP_EXACT_OUT_SINGLE = 0x08;
const V4_SWAP_EXACT_OUT = 0x09;
const V4_SETTLE = 0x0b;
const V4_SETTLE_ALL = 0x0c;
const V4_TAKE = 0x0e;
const V4_TAKE_ALL = 0x0f;
const V4_TAKE_PORTION = 0x10;

// A V4 exact-in `amountIn`, read the way V4Router reads it: zero is
// ActionConstants.OPEN_DELTA, not a quantity of zero. See the OPEN_DELTA
// comment above. The exact-OUT actions below decode no amounts at all, so
// their own OPEN_DELTA mapping on `amountOut` never reaches the screen.
function v4ExactInAmount(raw) {
    return raw === 0n ? OPEN_DELTA : raw;
}

// The V4 swap actions are read only in the parameter structs V4Router has
// deployed on mainnet and Sepolia. v4-periphery `main` has since added a
// `minHopPriceX36` field to all four (`src/interfaces/IV4Router.sol`), and
// reading a shape nobody has deployed would be guessing. ethers alone would
// read the newer structs anyway: it takes whatever word sits where a
// deployed field would be, ignores bytes left over, and holds back an error
// in a field until that field is used. The newer multi-hop exact-in struct
// then yields the offset of its hop-price array as `amountIn`. So a decode
// counts only when encoding the result again gives back the same bytes;
// otherwise this throws, and decodeV4Swap() marks the step as not decoded.
function decodeExactly(types, data) {
    const decoded = coder.decode(types, data);
    if (coder.encode(types, decoded) !== data) {
        throw new Error("Not in the deployed V4 parameter shape.");
    }
    return decoded;
}

// Decode one V4 swap action's parameters into the currency it spends
// (`tokenIn`), the currency it buys (`tokenOut`) and, for an exact-in action,
// its `amountIn` and `amountOutMin`. The exact-out actions decode no amounts.
// A field the action does not state is null. Throws when the parameters are
// not in the deployed shape (see decodeExactly()).
function decodeV4SwapAction(actionId, param) {
    if (actionId === V4_SWAP_EXACT_IN) {
        // ExactInputParams: (address currencyIn,
        //   tuple(address,uint24,int24,address,bytes)[] path,
        //   uint128 amountIn, uint128 amountOutMin)
        const s = decodeExactly(
            [
                "tuple(address,tuple(address,uint24,int24,address,bytes)[],uint128,uint128)",
            ],
            param,
        );
        const path = s[0][1];
        return {
            tokenIn: s[0][0],
            tokenOut: path.length > 0 ? path[path.length - 1][0] : null,
            amountIn: v4ExactInAmount(s[0][2]),
            amountOutMin: s[0][3],
        };
    }
    if (actionId === V4_SWAP_EXACT_IN_SINGLE) {
        // ExactInputSingleParams: (tuple(address,address,uint24,int24,address) poolKey,
        //   bool zeroForOne, uint128 amountIn, uint128 amountOutMin, bytes hookData)
        const s = decodeExactly(
            [
                "tuple(tuple(address,address,uint24,int24,address),bool,uint128,uint128,bytes)",
            ],
            param,
        );
        const poolKey = s[0][0];
        const zeroForOne = s[0][1];
        return {
            tokenIn: zeroForOne ? poolKey[0] : poolKey[1],
            tokenOut: zeroForOne ? poolKey[1] : poolKey[0],
            amountIn: v4ExactInAmount(s[0][2]),
            amountOutMin: s[0][3],
        };
    }
    if (actionId === V4_SWAP_EXACT_OUT) {
        // ExactOutputParams: (address currencyOut,
        //   tuple(address,uint24,int24,address,bytes)[] path,
        //   uint128 amountOut, uint128 amountInMaximum)
        const s = decodeExactly(
            [
                "tuple(address,tuple(address,uint24,int24,address,bytes)[],uint128,uint128)",
            ],
            param,
        );
        // The router works through the path from its last entry back to its
        // first, starting from currencyOut, so the first entry is what the
        // action spends.
        const path = s[0][1];
        return {
            tokenIn: path.length > 0 ? path[0][0] : null,
            tokenOut: s[0][0],
            amountIn: null,
            amountOutMin: null,
        };
    }
    // V4_SWAP_EXACT_OUT_SINGLE. ExactOutputSingleParams: (poolKey as above,
    //   bool zeroForOne, uint128 amountOut, uint128 amountInMaximum,
    //   bytes hookData)
    const s = decodeExactly(
        [
            "tuple(tuple(address,address,uint24,int24,address),bool,uint128,uint128,bytes)",
        ],
        param,
    );
    const poolKey = s[0][0];
    const zeroForOne = s[0][1];
    return {
        tokenIn: zeroForOne ? poolKey[0] : poolKey[1],
        tokenOut: zeroForOne ? poolKey[1] : poolKey[0],
        amountIn: null,
        amountOutMin: null,
    };
}

// The currencies in `list` that `other` does not hold, each listed once.
function currenciesNotIn(list, other) {
    return [...new Set(list.filter((c) => !other.includes(c)))];
}

// The amount that the swap actions on one side of a V4 step state together:
// the one action's own amount, or the sum when there are several and each
// states a quantity. Exact-out actions state none here, and the open delta is
// not a quantity. Otherwise null.
function totalAmount(amounts) {
    if (amounts.length === 1) return amounts[0];
    if (amounts.length === 0) return null;
    if (!amounts.every((a) => typeof a === "bigint")) return null;
    return amounts.reduce((sum, a) => sum + a, 0n);
}

// Decode V4_SWAP (command 0x10) input bytes.
// The input is ABI-encoded as (bytes actions, bytes[] params). Each swap
// action gives the currency it spends and the currency it buys (see
// decodeV4SwapAction()). The step's sides then follow three rules:
//
// 1. Token In is the currency SETTLE or SETTLE_ALL names; otherwise the one
//    currency that some swap action spends and none buys. Token Out is the
//    currency TAKE or TAKE_ALL names; otherwise the one currency that some
//    swap action buys and none spends. If there is not exactly one such
//    currency, that side is unknown.
// 2. Amount is the amountIn of the swap action that spends Token In. If
//    several exact-in actions spend it, each with a stated amount, it is
//    their sum; in any other case there is none. Min. received is the same
//    for amountOutMin and the actions that buy Token Out.
// 3. If any swap action in the step cannot be read, only SETTLE, SETTLE_ALL,
//    TAKE and TAKE_ALL name the sides, and there is no Amount or Min.
//    received.
//
// A currency a swap action does not name, such as what an exact-in action
// with an empty path buys, is null and counts in rules 1 and 2 as a currency
// like any other: a step of only that action has an unknown Token Out and
// the action's amountOutMin as Min. received.
//
// `hasSwapAction` is true when the step has a swap action, read or not.
// decode() then always sets the output side from this step, and sets the
// input side from it only when no earlier step set it. A side it sets that
// these rules leave unknown is set unknown, with no figure. A step with no
// swap action sets only the sides SETTLE, SETTLE_ALL, TAKE and TAKE_ALL
// name.
//
// `takes` is every TAKE, TAKE_ALL and TAKE_PORTION, as the currency it takes
// and its recipient as written, MSG_SENDER for a TAKE_ALL. TAKE_PORTION takes
// a share of the currency, so it does not name the output side as TAKE does.
// `recipientUnread` is set when the step has a payout this decoder did not
// read. `settledFromRouter` is every SETTLE that the router pays from its own
// balance (`payerIsUser` false), as its currency and the amount it pays: a
// quantity, CONTRACT_BALANCE (all the router holds), or null when this
// decoder cannot tell (see below).
function decodeV4Swap(input) {
    try {
        const d = coder.decode(["bytes", "bytes[]"], input);
        const actions = getBytes(d[0]);
        const params = d[1];

        let settleToken = null;
        let takeToken = null;
        const takes = [];
        // Every SETTLE paid from the router, as its currency, its amount as
        // written and its index among the step's actions.
        const routerSettles = [];
        // The currency of every SETTLE and SETTLE_ALL.
        const settledCurrencies = [];
        // The index of the step's last swap action, read or not, or -1.
        let lastSwapAction = -1;
        // Set when an action of the step could not be read.
        let actionUnread = false;
        let recipientUnread = false;
        // The step's swap actions that could be read, as decodeV4SwapAction()
        // reads them.
        const swaps = [];
        // Set when a swap action's parameters are not in the deployed shape
        // (see decodeExactly()), so nothing was read from that action. SETTLE,
        // SETTLE_ALL, TAKE and TAKE_ALL may still name both currencies.
        let swapUndecoded = false;

        for (let i = 0; i < actions.length; i++) {
            const actionId = actions[i];
            try {
                if (actionId === V4_SETTLE) {
                    // SETTLE: (address currency, uint256 maxAmount, bool payerIsUser)
                    const s = coder.decode(
                        ["address", "uint256", "bool"],
                        params[i],
                    );
                    settleToken = s[0];
                    settledCurrencies.push(s[0]);
                    if (!s[2]) {
                        routerSettles.push({
                            currency: s[0],
                            amount: s[1],
                            index: i,
                        });
                    }
                } else if (actionId === V4_SETTLE_ALL) {
                    // SETTLE_ALL: (address currency, uint256 maxAmount)
                    const s = coder.decode(["address", "uint256"], params[i]);
                    settleToken = s[0];
                    settledCurrencies.push(s[0]);
                } else if (actionId === V4_TAKE) {
                    // TAKE: (address currency, address recipient, uint256 amount)
                    const t = coder.decode(
                        ["address", "address", "uint256"],
                        params[i],
                    );
                    takeToken = t[0];
                    takes.push({ currency: t[0], recipient: t[1] });
                } else if (actionId === V4_TAKE_ALL) {
                    // TAKE_ALL: (address currency, uint256 minAmount)
                    const t = coder.decode(["address", "uint256"], params[i]);
                    takeToken = t[0];
                    takes.push({ currency: t[0], recipient: MSG_SENDER });
                } else if (actionId === V4_TAKE_PORTION) {
                    // TAKE_PORTION: (address currency, address recipient, uint256 bips)
                    const t = coder.decode(
                        ["address", "address", "uint256"],
                        params[i],
                    );
                    takes.push({ currency: t[0], recipient: t[1] });
                } else if (
                    actionId === V4_SWAP_EXACT_IN_SINGLE ||
                    actionId === V4_SWAP_EXACT_IN ||
                    actionId === V4_SWAP_EXACT_OUT_SINGLE ||
                    actionId === V4_SWAP_EXACT_OUT
                ) {
                    lastSwapAction = i;
                    try {
                        swaps.push(decodeV4SwapAction(actionId, params[i]));
                    } catch {
                        swapUndecoded = true;
                        actionUnread = true;
                    }
                } else {
                    // V4Router reverts on any action not named above, so
                    // none of them pays anyone. This decoder reads none.
                    actionUnread = true;
                }
            } catch {
                // Skip sub-actions we can't decode. A TAKE, TAKE_ALL or
                // TAKE_PORTION among them is a payout this decoder did not
                // read.
                actionUnread = true;
                if (
                    actionId === V4_TAKE ||
                    actionId === V4_TAKE_ALL ||
                    actionId === V4_TAKE_PORTION
                ) {
                    recipientUnread = true;
                }
            }
        }

        // What each SETTLE paid from the router pays. A quantity or
        // CONTRACT_BALANCE pays as written. A SETTLE of OPEN_DELTA (zero)
        // pays whatever the step still owes of its currency when it runs.
        // That is what the step's swap actions state they spend of it only
        // in the plain shape of Uniswap's own routes, so only then is it
        // given that amount: every action in the step was read; every swap
        // action names the currency it spends and the one it buys (an
        // exact-in action with an empty path swaps nothing); the SETTLE is
        // the step's only SETTLE or SETTLE_ALL of its currency and comes
        // after every swap action; no swap action buys that currency; and
        // the swap actions that spend it state a quantity together (see
        // totalAmount()). Otherwise it is given null.
        const settledFromRouter = routerSettles.map((s) => {
            if (s.amount !== 0n) {
                return { currency: s.currency, amount: s.amount };
            }
            const stated = totalAmount(
                swaps
                    .filter((w) => w.tokenIn === s.currency)
                    .map((w) => w.amountIn),
            );
            const paysWhatSwapsSpend =
                !actionUnread &&
                swaps.every((w) => present(w.tokenIn) && present(w.tokenOut)) &&
                settledCurrencies.filter((c) => c === s.currency).length ===
                    1 &&
                s.index > lastSwapAction &&
                !swaps.some((w) => w.tokenOut === s.currency) &&
                typeof stated === "bigint";
            return {
                currency: s.currency,
                amount: paysWhatSwapsSpend ? stated : null,
            };
        });

        // Rule 3.
        if (swapUndecoded) {
            return {
                tokenIn: settleToken,
                tokenOut: takeToken,
                amountIn: null,
                amountOutMin: null,
                takes,
                settledFromRouter,
                recipientUnread,
                swapUndecoded,
                hasSwapAction: true,
            };
        }

        const spent = swaps.map((s) => s.tokenIn);
        const bought = swaps.map((s) => s.tokenOut);

        // Rules 1 and 2 for Token In.
        let tokenIn = null;
        let amountIn = null;
        const spentOnly = currenciesNotIn(spent, bought);
        if (present(settleToken) || spentOnly.length === 1) {
            tokenIn = present(settleToken) ? settleToken : spentOnly[0];
            amountIn = totalAmount(
                swaps
                    .filter((s) => s.tokenIn === tokenIn)
                    .map((s) => s.amountIn),
            );
        }

        // Rules 1 and 2 for Token Out.
        let tokenOut = null;
        let amountOutMin = null;
        const boughtOnly = currenciesNotIn(bought, spent);
        if (present(takeToken) || boughtOnly.length === 1) {
            tokenOut = present(takeToken) ? takeToken : boughtOnly[0];
            amountOutMin = totalAmount(
                swaps
                    .filter((s) => s.tokenOut === tokenOut)
                    .map((s) => s.amountOutMin),
            );
        }

        return {
            tokenIn,
            tokenOut,
            amountIn,
            amountOutMin,
            takes,
            settledFromRouter,
            recipientUnread,
            swapUndecoded,
            hasSwapAction: swaps.length > 0,
        };
    } catch {
        return null;
    }
}

// Try to decode a Universal Router execute() call sent from `fromAddress`, the
// user, to `toAddress` on the network with chain id `chainId`.
// Returns { name, description, details } matching the format used by
// the approval UI, or null if the calldata is not a recognised execute() or
// `toAddress` is not a Universal Router on that network: the same calldata
// sent to any other contract is not a swap through the router, whatever that
// contract does with it.
function decode(data, toAddress, chainId, sources, fromAddress) {
    const release = routerRelease(toAddress, chainId);
    if (release === null) return null;
    const { commandTypeMask, commands, allowRevert } = release;
    try {
        const parsed = ROUTER_IFACE.parseTransaction({ data });
        if (!parsed) return null;

        const commandsBytes = getBytes(parsed.args[0]);
        const inputs = parsed.args[1];
        const deadline = parsed.args[2];

        let inputToken = null;
        let inputAmount = null;
        let inputEstablished = false;
        let outputToken = null;
        let minOutput = null;
        let outputEstablished = false;
        let hasUnwrapWeth = false;
        let hasV2ExactOut = false;
        let swapUndecoded = false;
        let hasSubPlan = false;
        const commandNames = [];

        // THE INVARIANT: an amount and the token it is counted in always come
        // from the same hop. A figure is never rendered against a token that
        // did not supply it.
        //
        // Both sides are therefore set as a PAIR — never field by field, and
        // never on truthiness. An address is never falsy once set but an
        // amount of 0n is, so gating the two halves independently let a hop
        // with a zero amount fix the token and leave the amount open; the next
        // hop's figure was then displayed against the first hop's token, at the
        // first hop's scale. A V3 USDT->WETH hop with amountIn 0 followed by a
        // V2 WETH->USDC hop of 0.5e18 rendered "500000000000.0000 USDT".
        //
        // The input side is fixed by the first hop that states either half, the
        // output side by the last, because the final leg is what the user
        // receives. A V4 step with a swap action sets a side even when it
        // states neither half: the output side always, and the input side
        // when no earlier hop set it. A half the establishing hop did not
        // state stays null and the line says so, rather than being filled in
        // from a different hop.
        const setInput = (token, amount) => {
            inputToken = present(token) ? token : null;
            inputAmount = present(amount) ? amount : null;
            inputEstablished = true;
        };
        const setInputOnce = (token, amount) => {
            if (inputEstablished) return;
            if (!present(token) && !present(amount)) return;
            setInput(token, amount);
        };
        const setOutput = (token, amount) => {
            if (!present(token) && !present(amount)) return;
            outputToken = present(token) ? token : null;
            minOutput = present(amount) ? amount : null;
            outputEstablished = true;
        };

        // Who the steps pay, in whichever step and of whatever token.
        // MSG_SENDER is the sender. The router itself, as ADDRESS_THIS or by
        // its own address, holds what it is paid until a later step pays it
        // out.
        const sender = (fromAddress || "").toLowerCase();
        let paidToSender = false;
        // Each other address paid, once.
        const paidElsewhere = [];
        // Set when a step may pay an address this decoder did not read.
        let payeeUnread = false;
        // Set when an ACROSS_V4_DEPOSIT_V3 step pays the bridge.
        let bridgeDeposit = false;
        // What each PERMIT2_TRANSFER_FROM moved from the sender into the
        // router, as { token, amount }. Later steps may leave part of it
        // there: nothing here checks that they spend all of it.
        const movedIntoRouter = [];
        // What each PERMIT2_TRANSFER_FROM not into the router moves from the
        // sender, in step order, whoever counts as paid, as
        // { token, recipient, amount, to }: `to` says where it goes, the
        // sender or the V2 pair the next swap spends, and is null when it
        // goes to `recipient` as written. A move into the router is in
        // `movedIntoRouter`, whose lines give its amount already.
        const movedFromSender = [];
        // Each token a step paid to the router that no later step paid out
        // or spent in full, by its address, lowercased, ETH as the zero
        // address. The router is paid what a swap step, V4 TAKE or
        // TAKE_PORTION pays it, the WETH of a WRAP_ETH into it, and the ETH
        // of an UNWRAP_WETH into it, in place of the WETH it held. All the
        // router holds of a token is paid out or spent by a SWEEP of that
        // token, an UNWRAP_WETH of WETH, a WRAP_ETH of CONTRACT_BALANCE of
        // ETH, a TRANSFER, PAY_PORTION, PAY_PORTION_FULL_PRECISION or
        // ACROSS_V4_DEPOSIT_V3 of all of it, or a swap step or V4 SETTLE paid
        // from the router (see spendFromRouter()). The value is the amount the
        // router holds, in base units, when a WRAP_ETH stated it, otherwise
        // null.
        const heldByRouter = new Map();
        const isRouter = (recipient) => {
            const r = recipient.toLowerCase();
            return r === ADDRESS_THIS || r === toAddress.toLowerCase();
        };
        // A swap step or V4 SETTLE pays `amount` of `token` from the router's
        // own balance. CONTRACT_BALANCE pays all of it. Any other quantity
        // counts against the amount a WRAP_ETH stated, and the steps pay all
        // of it once their amounts reach that one: a swap paid in ETH wraps
        // what its swap steps then spend. An amount that is not a quantity,
        // such as the null decodeV4Swap() gives a SETTLE whose payment it
        // cannot tell, or one of a token whose amount is not known, pays out
        // nothing this decoder can see.
        const spendFromRouter = (token, amount) => {
            const t = token.toLowerCase();
            const held = heldByRouter.get(t);
            if (amount === CONTRACT_BALANCE) {
                heldByRouter.delete(t);
            } else if (typeof held === "bigint" && typeof amount === "bigint") {
                if (amount >= held) {
                    heldByRouter.delete(t);
                } else {
                    heldByRouter.set(t, held - amount);
                }
            }
        };
        // A step pays `recipient`, an address other than the sender's or the
        // router's, as written.
        const addPaidElsewhere = (recipient) => {
            const r = recipient.toLowerCase();
            if (!paidElsewhere.some((a) => a.toLowerCase() === r)) {
                paidElsewhere.push(recipient);
            }
        };
        // A step pays `recipient`. `output` is the token a swap step or a V4
        // TAKE or TAKE_PORTION pays; other steps pass none.
        const addPayee = (recipient, output) => {
            const r = recipient.toLowerCase();
            if (isRouter(recipient)) {
                if (present(output)) {
                    heldByRouter.set(output.toLowerCase(), null);
                }
            } else if (r === MSG_SENDER || r === sender) {
                paidToSender = true;
            } else {
                addPaidElsewhere(recipient);
            }
        };
        // A step that pays `token` to `recipient` is a hop, not a payout,
        // when the very next step is a V2 exact-in whose input is already
        // paid, whose path starts at `token`, and whose pair (see v2PairFor())
        // is `recipient`: Uniswap's mixed routes pay the next V2 pair
        // directly, and the router enforces that next swap's own minimum.
        // Its input is already paid when its amountIn is ALREADY_PAID, or
        // CONTRACT_BALANCE, which Uniswap's routes send and with which the
        // router adds only what it holds.
        const isHop = (i, token, recipient) => {
            if (i + 1 >= commandsBytes.length) return false;
            const nextCommand =
                commands[commandsBytes[i + 1] & commandTypeMask];
            if (nextCommand !== "V2_SWAP_EXACT_IN") return false;
            const next = decodeV2SwapExactIn(inputs[i + 1]);
            return (
                next !== null &&
                (next.amountIn === ALREADY_PAID ||
                    next.amountIn === CONTRACT_BALANCE) &&
                present(token) &&
                next.path.length >= 2 &&
                next.tokenIn.toLowerCase() === token.toLowerCase() &&
                recipient.toLowerCase() ===
                    v2PairFor(chainId, next.path[0], next.path[1]).toLowerCase()
            );
        };

        for (let i = 0; i < commandsBytes.length; i++) {
            const cmdId = commandsBytes[i] & commandTypeMask;
            // The command this release runs for the step (see ROUTER_V1),
            // undefined for a type it names no command for.
            const command = commands[cmdId];
            // The router goes on to the next step if this one fails (see
            // ROUTER_V1). The flag on any other command has no effect.
            const allowedToFail =
                (commandsBytes[i] & ALLOW_REVERT_FLAG) !== 0 &&
                allowRevert.includes(cmdId);
            commandNames.push(
                present(command)
                    ? COMMAND_NAMES[command]
                    : "Command 0x" + cmdId.toString(16).padStart(2, "0"),
            );

            try {
                if (command === "EXECUTE_SUB_PLAN") {
                    // EXECUTE_SUB_PLAN runs a further list of commands held in
                    // its input, which this decoder does not read. The step
                    // says so, and after this loop neither side is named.
                    // Those commands may pay any address.
                    hasSubPlan = true;
                    commandNames[i] += " (its steps are not shown)";
                    payeeUnread = true;
                } else if (command === "PERMIT2_PERMIT") {
                    const p = decodePermit2(inputs[i]);
                    // A permit states both halves itself, so it may replace an
                    // input side an earlier hop established without breaking
                    // the invariant.
                    if (p) setInput(p.token, p.amount);
                } else if (command === "PERMIT2_TRANSFER_FROM") {
                    const p = decodePermit2TransferFrom(inputs[i]);
                    if (!p) {
                        payeeUnread = true;
                    } else if (
                        commandTypeMask === 0x1f &&
                        [MSG_SENDER, ADDRESS_THIS].includes(
                            p.recipient.toLowerCase(),
                        )
                    ) {
                        // UniversalRouterV1, the router with the 0x1f mask,
                        // pays address(1) and address(2) as written (see
                        // decodePermit2TransferFrom()).
                        addPaidElsewhere(p.recipient);
                        movedFromSender.push({ ...p, to: null });
                    } else if (isRouter(p.recipient)) {
                        movedIntoRouter.push(p);
                    } else if (isHop(i, p.token, p.recipient)) {
                        movedFromSender.push({
                            ...p,
                            to: "The V2 pair the next swap spends",
                        });
                    } else {
                        addPayee(p.recipient);
                        movedFromSender.push({
                            ...p,
                            to:
                                p.recipient.toLowerCase() === MSG_SENDER
                                    ? "The sender"
                                    : null,
                        });
                    }
                } else if (command === "BALANCE_CHECK_ERC20") {
                    const b = decodeBalanceCheck(inputs[i]);
                    if (!b) {
                        // The router still runs a check whose input does not
                        // decode, such as an owner word with a nonzero top
                        // byte, of which it reads the last 20 bytes, so the
                        // owner may be any address. It sets no side, and the
                        // step says so.
                        commandNames[i] += " (could not be decoded)";
                    } else if (b.owner.toLowerCase() !== sender) {
                        // The router reads the owner as written (see
                        // decodeBalanceCheck()), so address(1) and address(2)
                        // are not the sender and the router here. A check of
                        // any address but the sender's says nothing about
                        // what the user receives: it sets no side, and the
                        // step says so.
                        commandNames[i] += " (of another address)";
                    } else {
                        // The router passes this check whenever the owner
                        // holds at least minBalance, so a zero one guarantees
                        // nothing and does not replace a minimum an earlier
                        // step stated. A check the router lets fail guarantees
                        // nothing either, so it is read as a zero one. Any
                        // other minBalance sets the output side as a swap
                        // does. It pays nobody.
                        const minBalance = allowedToFail ? 0n : b.minBalance;
                        if (!(minBalance === 0n && present(minOutput))) {
                            setOutput(b.token, minBalance);
                        }
                    }
                } else if (command === "V3_SWAP_EXACT_IN") {
                    const s = decodeV3SwapExactIn(inputs[i]);
                    if (s) {
                        setInputOnce(s.tokenIn, s.amountIn);
                        // Always update output: in multi-step swaps (V3 → V4),
                        // the last swap step determines the final output token
                        // and minimum received amount.
                        setOutput(s.tokenOut, s.amountOutMin);
                        if (!s.payerIsUser) {
                            spendFromRouter(s.tokenIn, s.amountIn);
                        }
                        if (!isHop(i, s.tokenOut, s.recipient)) {
                            addPayee(s.recipient, s.tokenOut);
                        }
                    } else {
                        payeeUnread = true;
                    }
                } else if (command === "V2_SWAP_EXACT_IN") {
                    const s = decodeV2SwapExactIn(inputs[i]);
                    if (s) {
                        setInputOnce(s.tokenIn, s.amountIn);
                        setOutput(s.tokenOut, s.amountOutMin);
                        if (!s.payerIsUser) {
                            spendFromRouter(s.tokenIn, s.amountIn);
                        }
                        if (!isHop(i, s.tokenOut, s.recipient)) {
                            addPayee(s.recipient, s.tokenOut);
                        }
                    } else {
                        payeeUnread = true;
                    }
                } else if (command === "V2_SWAP_EXACT_OUT") {
                    // Buys exactly amountOut and spends at most amountInMax.
                    hasV2ExactOut = true;
                    const s = decodeV2SwapExactOut(inputs[i]);
                    if (s) {
                        setInputOnce(s.tokenIn, s.amountInMax);
                        setOutput(s.tokenOut, s.amountOut);
                        if (!isHop(i, s.tokenOut, s.recipient)) {
                            addPayee(s.recipient, s.tokenOut);
                        }
                    } else {
                        payeeUnread = true;
                    }
                } else if (command === "SWEEP") {
                    const s = decodeSweep(inputs[i]);
                    if (s) {
                        addPayee(s.recipient);
                        if (!isRouter(s.recipient)) {
                            heldByRouter.delete(s.token.toLowerCase());
                        }
                    } else {
                        payeeUnread = true;
                    }
                } else if (
                    command === "TRANSFER" ||
                    command === "PAY_PORTION" ||
                    command === "PAY_PORTION_FULL_PRECISION"
                ) {
                    const t = decodeTransfer(inputs[i]);
                    if (t) {
                        if (!isHop(i, t.token, t.recipient)) {
                            addPayee(t.recipient);
                        }
                        // The amount with which TRANSFER, PAY_PORTION or
                        // PAY_PORTION_FULL_PRECISION pays all the router
                        // holds of the token, as SWEEP does.
                        const all =
                            command === "TRANSFER"
                                ? CONTRACT_BALANCE
                                : command === "PAY_PORTION"
                                  ? 10000n
                                  : 10n ** 18n;
                        // A TRANSFER of ETH has no such amount: the router
                        // sends ETH as written, so a TRANSFER of
                        // CONTRACT_BALANCE of ETH always reverts.
                        const ethTransfer =
                            command === "TRANSFER" &&
                            t.token ===
                                "0x0000000000000000000000000000000000000000";
                        if (
                            t.amount === all &&
                            !ethTransfer &&
                            !isRouter(t.recipient)
                        ) {
                            heldByRouter.delete(t.token.toLowerCase());
                        }
                    } else {
                        payeeUnread = true;
                    }
                } else if (command === "ACROSS_V4_DEPOSIT_V3") {
                    const a = decodeAcrossV4DepositV3(inputs[i]);
                    if (a) {
                        bridgeDeposit = true;
                        // The bridge pays or refunds these as written, so
                        // only the sender's own address is the sender.
                        for (const r of [a.recipient, a.depositor]) {
                            if (r.toLowerCase() !== sender) {
                                addPaidElsewhere(r);
                            }
                        }
                        // A deposit of CONTRACT_BALANCE pays all the router
                        // holds of its token, or of ETH with useNative set.
                        if (a.inputAmount === CONTRACT_BALANCE) {
                            heldByRouter.delete(
                                a.useNative
                                    ? "0x0000000000000000000000000000000000000000"
                                    : a.inputToken.toLowerCase(),
                            );
                        }
                    } else {
                        payeeUnread = true;
                    }
                } else if (command === "WRAP_ETH") {
                    const w = decodeWrapEth(inputs[i]);
                    if (w) {
                        setInputOnce(
                            "0x0000000000000000000000000000000000000000",
                            w.amount,
                        );
                        addPayee(w.recipient);
                        // CONTRACT_BALANCE wraps all the router's ETH.
                        if (w.amount === CONTRACT_BALANCE) {
                            heldByRouter.delete(
                                "0x0000000000000000000000000000000000000000",
                            );
                        }
                        // Into the router, the router holds the WETH. Its
                        // amount is known when the step states it and the
                        // router held no WETH before.
                        if (isRouter(w.recipient) && w.amount > 0n) {
                            const weth = WETH.get(chainId);
                            heldByRouter.set(
                                weth,
                                w.amount === CONTRACT_BALANCE ||
                                    heldByRouter.has(weth)
                                    ? null
                                    : w.amount,
                            );
                        }
                    } else {
                        payeeUnread = true;
                    }
                } else if (command === "V4_SWAP") {
                    const v4 = decodeV4Swap(inputs[i]);
                    if (v4) {
                        // Each SETTLE paid from the router spends the amount
                        // decodeV4Swap() says it pays.
                        for (const s of v4.settledFromRouter) {
                            spendFromRouter(s.currency, s.amount);
                        }
                        for (const t of v4.takes) {
                            if (!isHop(i, t.currency, t.recipient)) {
                                addPayee(t.recipient, t.currency);
                            }
                        }
                    }
                    if (!v4 || v4.recipientUnread) {
                        payeeUnread = true;
                    }
                    if (v4 && v4.swapUndecoded) {
                        // A swap action of this step went unread, so the step
                        // is marked.
                        swapUndecoded = true;
                        commandNames[i] += " (could not be decoded)";
                    }
                    if (v4 && v4.hasSwapAction) {
                        // A step with a swap action always sets the output
                        // side, as the last swap step wins, and sets the
                        // input side only when no earlier step set it. Each
                        // side it sets is set as a pair, even when the step
                        // states neither half, so a side decodeV4Swap() left
                        // unknown is set unknown with no figure. A token
                        // stated without a figure, or a figure without a
                        // token, likewise never sits beside an earlier step's
                        // other half.
                        if (!inputEstablished) {
                            setInput(v4.tokenIn, v4.amountIn);
                        }
                        outputToken = v4.tokenOut;
                        minOutput = v4.amountOutMin;
                        outputEstablished = true;
                    } else if (v4) {
                        // A step with no swap action sets only the sides its
                        // SETTLE, SETTLE_ALL, TAKE or TAKE_ALL names:
                        // setInputOnce() and setOutput() leave alone a side
                        // whose two halves are both unstated.
                        setInputOnce(v4.tokenIn, v4.amountIn);
                        setOutput(v4.tokenOut, v4.amountOutMin);
                    }
                } else if (command === "UNWRAP_WETH") {
                    hasUnwrapWeth = true;
                    const u = decodeUnwrapWeth(inputs[i]);
                    if (u) {
                        addPayee(u.recipient);
                        // It pays out all the router's WETH, as ETH. Into the
                        // router, the router then holds as ETH the WETH a
                        // step paid it.
                        const heldWeth = WETH_ADDRESSES.some((w) =>
                            heldByRouter.has(w),
                        );
                        WETH_ADDRESSES.forEach((w) => heldByRouter.delete(w));
                        if (isRouter(u.recipient) && heldWeth) {
                            heldByRouter.set(
                                "0x0000000000000000000000000000000000000000",
                                null,
                            );
                        }
                    } else {
                        payeeUnread = true;
                    }
                } else {
                    // Any other step may pay an address this decoder does not
                    // read: V3_SWAP_EXACT_OUT, PERMIT2_TRANSFER_FROM_BATCH and
                    // the NFT commands among them, and a type the release
                    // names no command for.
                    payeeUnread = true;
                }
            } catch {
                // Skip commands we can't decode. One may pay any address.
                payeeUnread = true;
            }
            if (allowedToFail) {
                commandNames[i] += " (allowed to fail)";
            }
        }

        // The commands of an EXECUTE_SUB_PLAN step may spend the user's tokens
        // or pay the user, before or after any other step, and a permit among
        // them would replace the input side. What the other steps state is
        // then not the whole swap, so both sides are set unknown, with no
        // figure, wherever the step stands.
        if (hasSubPlan) {
            inputToken = null;
            inputAmount = null;
            outputToken = null;
            minOutput = null;
            outputEstablished = true;
        }

        // Resolve token info. A null token on either side means no step named
        // a currency for it, a V4 step with a swap action left it unknown, or
        // an EXECUTE_SUB_PLAN step did; tokenInfo() refuses rather than calling
        // it ETH. UNWRAP_WETH turns WETH into ETH, so it makes the output ETH
        // when the output side is WETH, or when no step set the output side. A
        // V4 step with a swap action, or an EXECUTE_SUB_PLAN step, did set it,
        // even when it set it unknown. Any other output keeps its own token
        // and figure: a swap that buys USDC and then unwraps the WETH it did
        // not spend receives USDC.
        const outputIsWeth =
            present(outputToken) &&
            WETH_ADDRESSES.includes(outputToken.toLowerCase());
        const inInfo = tokenInfo(inputToken, sources);
        const outInfo =
            hasUnwrapWeth && (outputIsWeth || !outputEstablished)
                ? { symbol: "ETH", decimals: 18, address: null }
                : tokenInfo(outputToken, sources);

        const inSymbol = inInfo.symbol;
        const outSymbol = outInfo.symbol;

        const name =
            inSymbol && outSymbol
                ? "Swap " + inSymbol + " \u2192 " + outSymbol
                : "Uniswap Swap";

        const details = [];

        details.push({
            label: "Protocol",
            value: "Uniswap Universal Router",
            address: toAddress,
        });

        if (present(inputToken) && present(inInfo.address)) {
            const label = inSymbol
                ? inSymbol + " (" + inputToken + ")"
                : inputToken;
            details.push({
                label: "Token In",
                value: label,
                address: inputToken,
                isToken: true,
            });
        } else if (inSymbol === "ETH") {
            details.push({ label: "Token In", value: "ETH (native)" });
        } else {
            // Nothing established the input token, so the line says that
            // rather than going missing or naming a token by default. Same
            // wording as the Token Out refusal below: the two sides of this
            // screen must not describe the same condition in two ways.
            details.push({
                label: "Token In",
                value:
                    swapUndecoded || hasSubPlan
                        ? UNDECODED_CURRENCY
                        : UNNAMED_CURRENCY,
            });
        }

        if (present(inputAmount)) {
            // Three amounts need no scale to describe and are named rather
            // than formatted: V4's open delta and V2's already-paid zero,
            // neither of which is a quantity at all (see OPEN_DELTA and
            // ALREADY_PAID), and an unbounded permit. Those two tests come
            // first — the sentinels are not bigints and cannot be compared
            // with one.
            let amount;
            if (inputAmount === OPEN_DELTA) {
                amount = { raw: OPEN_DELTA_AMOUNT, display: OPEN_DELTA_AMOUNT };
            } else if (inputAmount === ALREADY_PAID) {
                amount = {
                    raw: ALREADY_PAID_AMOUNT,
                    display: ALREADY_PAID_AMOUNT,
                };
            } else if (inputAmount >= MAX_UINT160) {
                amount = { raw: "Unlimited", display: "Unlimited" };
            } else if (hasV2ExactOut) {
                // A V2 exact-out swap spends at most this figure, whichever
                // step set the line (its amountInMax, the WRAP_ETH of a swap
                // paid in ETH, a permit), so it is said to be a maximum, in
                // `raw` too: the wait, success and error screens show `raw` as
                // the transaction's amount.
                const most = amountText(inputAmount, inInfo);
                amount = {
                    raw: "Up to " + most.raw,
                    display: "Up to " + most.display,
                };
            } else {
                amount = amountText(inputAmount, inInfo);
            }
            details.push({
                label: "Amount",
                value: amount.display,
                rawValue: amount.raw,
            });
        }

        // What each PERMIT2_TRANSFER_FROM moves: its amount, its token and
        // where it goes, an address on a line of its own.
        for (const m of movedFromSender) {
            details.push({
                label: "Moved from the sender",
                value: amountText(m.amount, tokenInfo(m.token, sources))
                    .display,
            });
            details.push(tokenMovedLine("Token moved", m.token, sources));
            details.push(
                present(m.to)
                    ? { label: "Moved to", value: m.to }
                    : {
                          label: "Moved to",
                          value: m.recipient,
                          address: m.recipient,
                      },
            );
        }

        // Keyed on the address, not the symbol: a token absent from the
        // bundled list has no symbol, and gating the line on one dropped it
        // entirely, leaving a Min. received figure with nothing saying what is
        // being received. The Token In line above already falls back to the
        // address; this does the same.
        if (present(outInfo.address)) {
            const label = outSymbol
                ? outSymbol + " (" + outInfo.address + ")"
                : outInfo.address;
            details.push({
                label: "Token Out",
                value: label,
                address: outInfo.address,
                isToken: true,
            });
        } else if (outSymbol) {
            details.push({ label: "Token Out", value: outSymbol });
        } else {
            // Nothing established the output token, so the line says that
            // rather than going missing or naming a token by default, and a
            // Min. received figure below it is never attached to a token the
            // calldata did not state.
            details.push({
                label: "Token Out",
                value:
                    swapUndecoded || hasSubPlan
                        ? UNDECODED_CURRENCY
                        : UNNAMED_CURRENCY,
            });
        }

        // A Paid to line names each other address paid, and says when a
        // step pays the bridge, when one moves the sender's tokens into the
        // router, when a token stays in the router, and when a payout could
        // not be read. The output is received by the sender only when some
        // step pays the sender and there is no such line. When no step names
        // anyone paid, one line says so. `paidTo` holds these lines and the
        // token line after each line about a token in the router.
        const outputHeld =
            present(outputToken) && heldByRouter.has(outputToken.toLowerCase());
        const paidTo = paidElsewhere.map((address) => ({
            label: "Paid to",
            value: address,
            address,
        }));
        if (bridgeDeposit) {
            paidTo.push({ label: "Paid to", value: PAID_TO_BRIDGE });
        }
        for (const m of movedIntoRouter) {
            const info = tokenInfo(m.token, sources);
            paidTo.push({
                label: "Paid to",
                value:
                    "The router, " +
                    amountText(m.amount, info).display +
                    " from the sender (later steps may not spend all of it)",
            });
            paidTo.push(
                tokenMovedLine("Token moved into the router", m.token, sources),
            );
        }
        if (outputHeld) {
            paidTo.push({ label: "Paid to", value: STAYS_IN_ROUTER });
        }
        // Any other token the router still holds after the last step, such
        // as one a swap step bought on the way to the output, what a V4
        // SETTLE took beyond what the step's swap spent, or the WETH of a
        // WRAP_ETH, stays there too, and its line is followed by the token's.
        for (const token of heldByRouter.keys()) {
            if (present(outputToken) && token === outputToken.toLowerCase()) {
                continue;
            }
            paidTo.push({ label: "Paid to", value: STAYS_IN_ROUTER });
            paidTo.push(
                tokenMovedLine(
                    "Token moved into the router",
                    getAddress(token),
                    sources,
                ),
            );
        }
        if (payeeUnread) {
            paidTo.push({ label: "Paid to", value: UNDECODED_CURRENCY });
        }
        const received = paidToSender && paidTo.length === 0;
        if (!paidToSender && paidTo.length === 0) {
            paidTo.push({ label: "Paid to", value: UNNAMED_CURRENCY });
        }
        details.push(...paidTo);

        if (present(minOutput)) {
            // A zero floor is the one case the user most needs stated: the
            // swap guarantees nothing back. It is said in words, in the same
            // register as UNNAMED_CURRENCY, because "0.0000 WETH" reads as an
            // artifact of the four-decimal rule rather than as "this may
            // return nothing" — and because it is true at every scale, so it
            // holds even when the output token's decimals are unknown.
            details.push({
                label: received ? "Min. received" : "Min. paid out",
                value:
                    minOutput === 0n
                        ? NO_MINIMUM
                        : amountText(minOutput, outInfo).display,
            });
        }

        details.push({ label: "Steps", value: commandNames.join(" \u2192 ") });

        // A JavaScript date reaches only to 275760-09-13 00:00:00 UTC. A
        // later deadline, such as the uint256 maximum, makes an invalid date,
        // and toISOString() throws on one, so that deadline is said in words.
        const deadlineDate = new Date(Number(deadline) * 1000);
        details.push({
            label: "Deadline",
            value: isNaN(deadlineDate.getTime())
                ? "After 275760-09-13 00:00:00 (no deadline in practice)"
                : deadlineDate.toISOString().replace("T", " ").slice(0, 19),
        });

        return {
            name,
            description: "Swap via Uniswap Universal Router",
            details,
        };
    } catch {
        return null;
    }
}

module.exports = { decode };