fix: the approval screen names the address a swap's output is paid to (closes #594)

The swap decoder read no recipient, so a swap paying its output to another
address still showed Min. received. It now collects the address that every
swap step, SWEEP, WRAP_ETH, UNWRAP_WETH, V4 TAKE and TAKE_ALL pays, across the
whole transaction, leaving out payments to the router itself. The minimum
reads Min. received only when some step pays the sender, none pays another
address, and no step that may pay an address went unread: a recipient that
does not decode, or a command or V4 action the decoder does not read.
Otherwise it reads Min. paid out, with a Paid to line for each other address
and one saying when who is paid is unknown. The approval and transaction
detail screens pass the sender in.

Model: opus-5-5

README.md

@@ -418,10 +418,6 @@ Each group of these assertions records a coverage key and a final case demands
 the exact set, so a section that silently stopped running reddens the suite
 instead of quietly shrinking it.
 
-It also covers the red banner on the Settings screen: switching the network
-there to Sepolia must put up the `[TESTNET]` banner, and switching back to
-mainnet must take it down, both while Settings is still on screen.
-
 It also covers the confirmation screen, for both a native ETH send and an ERC-20
 send: Send disabled while the fee estimate is in flight, enabled once it lands,
 the fee block quoting the expected cost and the reserve separately, the distinct
@@ -434,15 +430,6 @@ reserve while sitting on the same side of the estimate, so swapping the two in
 what [#154](https://git.eeqj.de/sneak/AutistMask/issues/154) was, and it was
 previously correct by reading only.
 
-It also covers a send that Sign & Send refuses for its network fee: the stub
-node quotes an ordinary fee while the confirmation screen is drawn and one over
-the bound when Sign & Send asks again, and the refusal must broadcast nothing
-and leave the password field and Sign & Send where they were. It checks the same
-for a send refused because the selected wallet does not hold its From address:
-with the confirmation screen showing a send from the HD wallet, the key wallet
-is selected by writing it straight into extension storage, as another popup
-selecting it would save it, and the popup is reopened onto that screen.
-
 It also covers both ways the wait for a sent transaction's receipt ends on the
 error screen: lookups that still find no receipt 60 seconds after the broadcast,
 and six lookups in a row that fail. Each must show its own message, and Done
@@ -1090,29 +1077,23 @@ The rule and its exception live in `src/shared/amountDisplay.js` as
 confirmation screens display goes through the floored one — the ERC-20 amount,
 the ETH value and max fee (`src/popup/views/approval.js`), the swap's `Amount`
 and `Min. received` lines (`src/shared/uniswap.js`), the Send screen's
-`Current balance` (`src/popup/views/send.js`), and the amount, balance and
-network fee on the confirmation screen for the wallet's own send
-(`src/popup/views/confirmTx.js`), which hands the wait, success and error
-screens the amount as it showed it. The transaction is still signed for the
-exact amount, and its USD value is priced from it. Both screens render a network
-fee through `formatFee()` in `src/popup/views/helpers.js`, which prices the
-exact fee in USD rather than its truncated figure, so the same fee reads the
-same on both, USD value included. Balances are stored exactly
-(`src/shared/balances.js`), whatever decimals a token declares, so a balance
-below the floor reaches these screens as it is. The history list
-(`src/shared/transactions.js`) uses the unfloored one: the transaction detail
-view is the authoritative record and already shows exact precision. The balance
-lists use neither: they round to four places with `toFixed(4)` (`balanceLine()`
-in `src/popup/views/helpers.js`). The 4-decimal rule is unchanged everywhere
-else, including for amounts at or above the floor on the approval screens.
+`Current balance` (`src/popup/views/send.js`), and the balance and network fee
+on the confirmation screen for the wallet's own send
+(`src/popup/views/confirmTx.js`). Both screens render a network fee through
+`formatFee()` in `src/popup/views/helpers.js`, which prices the exact fee in USD
+rather than its truncated figure, so the same fee reads the same on both, USD
+value included. Balances are stored exactly (`src/shared/balances.js`), whatever
+decimals a token declares, so a balance below the floor reaches these screens as
+it is. The history list (`src/shared/transactions.js`) uses the unfloored one:
+the transaction detail view is the authoritative record and already shows exact
+precision. The balance lists use neither: they round to four places with
+`toFixed(4)` (`balanceLine()` in `src/popup/views/helpers.js`). The 4-decimal
+rule is unchanged everywhere else, including for amounts at or above the floor
+on the approval screens.
 
-On the approval screen and the wait, success and error screens that carry its
-amount forward, the floor applies only where the token's scale is known. Where
-it is not, they state base units instead of a quantity — see Unknown token scale
-below — and no truncation happens at all. On ConfirmTx and the wait, success and
-error screens that follow it, the amount of a token whose scale is unknown,
-which cannot be sent, is the text from Send's amount field cut to four decimals
-with the same floor (`.5` reads `.5000`).
+The floor applies only where the token's scale is known. Where it is not, the
+approval screen states base units instead of a quantity — see Unknown token
+scale below — and no truncation happens at all.
 
 **Specific Exception — unknown token scale:** Calldata carries base units and no
 scale, so every amount on the dApp approval screen needs the token's `decimals`.
@@ -1212,13 +1193,7 @@ number. They can read:
   guarantees nothing: it sets `Token Out` and `Min. received` only when the
   output side holds no minimum, not even a zero one, at the point the check is
   reached, and otherwise leaves the current token and figure in place. A nonzero
-  `minBalance` sets both lines, as a swap step does. Only a check of the
-  transaction's sender's own balance sets either line; a check of any other
-  address sets neither (see Transaction Decoding). A `BALANCE_CHECK_ERC20` step
-  that the router lets fail without reverting the transaction (see Transaction
-  Decoding) guarantees nothing either, whatever its `minBalance`, and is read as
-  one whose `minBalance` is zero. A minimum stated by a V4 swap step the router
-  lets fail is likewise read as zero.
+  `minBalance` sets both lines, as a swap step does.
 
 The swap's `Token In` and `Token Out` lines name a currency, not an amount; each
 reads `Unknown (not named in the calldata)` when the decoder found no token for
@@ -1523,19 +1498,6 @@ such as an edit typed into Settings and not yet saved. Home is the one screen
 "Back" always re-renders, so the wallet list reflects anything that changed
 while the user was away from it.
 
-A network switch in Settings leaves every screen beneath Settings showing the
-previous network, so after it "Back" behaves as in a reopened popup: every
-screen on the stack counts as not yet rendered, and the stack is cut at the
-first screen that cannot be rendered from saved state, such as Send or AddToken,
-or at AddressToken for any token but the native one, because that token was
-picked on the previous network. The cut stack is saved with the switch, so a
-popup closed straight after it and reopened onto Settings lands in the same
-place. "Back" then renders the screen it lands on for the new network, except
-ConfirmTx, which keeps the network its transaction was reviewed on, and anything
-typed there and not saved, which belonged to the previous network, is dropped.
-Without a wallet the stack is not cut, because it starts at Welcome, which shows
-nothing from a network.
-
 Every screen that holds secret material in the page registers a cleanup with
 `onViewLeave()` (`src/popup/views/helpers.js`), which `showView()` runs on every
 exit from that screen rather than only on its "Back" button, so nothing secret
@@ -1777,59 +1739,42 @@ view would leave a wallet one click from deletion.
     - Token contract: full address + etherscan link (ERC-20 only)
     - From: blockie + color dot + full address + etherscan link + wallet title
     - To: blockie + color dot + full address + etherscan link + ENS name
-    - Amount: value + symbol (USD in parentheses), the value to four decimal
-      places with the nonzero floor, as on TxApproval (see Display Consistency),
-      however Send's amount field wrote it (`.5` and `0.5` both read `0.5000`).
-      For a token whose scale is unknown, which cannot be sent, the value is the
-      text from Send's amount field cut the same way (`.5` reads `.5000`). An
-      ETH amount Send's "Max" filled in is worked out again from this screen's
-      own fee estimate when it arrives, as the balance minus the reserve, and
-      the transaction is signed with that estimate's fee fields, so a fee
-      fetched again at signing cannot exceed what the amount leaves behind. The
-      address keeps whatever part of the reserve the transaction does not use.
-      If the balance could not be read or no longer covers the fee, the amount
-      is left as it was and one of the errors below blocks the send
-    - Your balance: the From address's balance on the network its transaction
-      was reviewed on, read from that network's RPC endpoint each time the
-      screen is shown, so a screen the popup reopens onto states and checks that
-      network's balance as it is then, whichever network is active. "Loading..."
-      until the read returns, then value + symbol (USD in parentheses), or
-      `unknown (SYMBOL)` for a token whose scale is unknown or when the read
-      failed. The amount check uses the same balances: the ETH balance, and for
-      a token transfer the token balance as well
+    - Amount: value + symbol (USD in parentheses). An ETH amount Send's "Max"
+      filled in is worked out again from this screen's own fee estimate when it
+      arrives, as the balance minus the reserve, and the transaction is signed
+      with that estimate's fee fields, so a fee fetched again at signing cannot
+      exceed what the amount leaves behind. The address keeps whatever part of
+      the reserve the transaction does not use. If the balance no longer covers
+      the fee, the amount is left as it was and the amount-plus-fee error below
+      blocks the send
+    - Your balance: value + symbol (USD in parentheses), or `unknown (SYMBOL)`
+      for a token whose scale is unknown
     - Network fee: "Estimating..." then two lines, or "Unable to estimate",
-      fetched async once the balance is read. The first line is what the
-      transfer is expected to cost, `gasLimit * gasPrice` (USD in parentheses);
-      the second is the `gasLimit * maxFeePerGas` reserve the node requires,
-      which is what the balance check gates on. The second line is omitted on a
-      network with no type-2 pricing, where the two are the same number, but its
-      space is reserved either way
+      fetched async. The first line is what the transfer is expected to cost,
+      `gasLimit * gasPrice` (USD in parentheses); the second is the
+      `gasLimit * maxFeePerGas` reserve the node requires, which is what the
+      balance check gates on. The second line is omitted on a network with no
+      type-2 pricing, where the two are the same number, but its space is
+      reserved either way
     - Warnings: inline warnings from the local checks (scam address, self-send)
       plus four reserved warning boxes made visible by the async checks —
       recipient that has never sent a transaction and holds no ETH, recipient is
       a contract, burn address, and an Etherscan phishing/scam label. An address
       that has received ETH but never sent a transaction still holds that ETH,
       so it gets no warning
-    - Errors (an invalid amount), plus five reserved error boxes, so the balance
-      and the fee arriving later move nothing — the amount exceeds the balance
-      (for a token whose scale is unknown it says the token's balance is
-      unknown), the balance could not be read (it asks the user to go back and
-      try again), the amount plus the fee exceeds the balance (ETH transfers),
-      not enough ETH to pay the fee for the transfer (ERC-20 transfers), and the
-      fee could not be estimated. The third and fourth are mutually exclusive
-      per transfer type, so only the applicable one holds space. The last names
-      its cause: for a token whose scale is unknown the fee can never be
-      estimated, and it says the wallet does not know how many decimal places
-      the token uses and that the transaction cannot be sent; for any other
-      failure it asks the user to go back and try again
-    - Three more reserved error boxes, made visible when "Sign & Send" refuses a
-      send because the active network changed, because the selected wallet does
-      not hold the From address, or because of its gas limit or fee (see
-      Transitions), so the refusal moves nothing
+    - Errors (insufficient balance), plus three reserved error boxes — the
+      amount plus the fee exceeds the balance (ETH transfers), not enough ETH to
+      pay the fee for the transfer (ERC-20 transfers), and the fee could not be
+      estimated. The first two are mutually exclusive per transfer type, so only
+      the applicable one holds space. The last names its cause: for a token
+      whose scale is unknown the fee can never be estimated, and it says the
+      wallet does not know how many decimal places the token uses and that the
+      transaction cannot be sent; for any other failure it asks the user to go
+      back and try again
     - Password: an inline field on this screen, not a modal, with its own error
       line
-    - "Sign & Send" button (disabled if errors, while the balance is being read,
-      and while the network fee estimate is pending or unavailable)
+    - "Sign & Send" button (disabled if errors, and while the network fee
+      estimate is pending or unavailable)
 - **Transitions**:
     - "Sign & Send" (correct password) → broadcast tx → **WaitTx**
     - "Sign & Send" (correct password) → broadcast fails → **ErrorTx**
@@ -1841,37 +1786,26 @@ view would leave a wallet one click from deletion.
       it, and a disagreement is a refusal rather than a preference for either
       value (`src/shared/transferAmount.js`)
     - "Sign & Send" after the active network was switched in Settings since this
-      transaction was reviewed → nothing is signed; "The active network changed
-      after this transaction was reviewed, so it was not sent. Please go back
-      and review it again." in its own box, no screen change. After a switch,
-      "Back" from Settings draws this screen again from the saved transaction,
-      as a popup reopened onto it does; when Send is beneath it on the stack, as
-      when Send showed it in the same popup, "Back" lands below Send instead
-      (see the top of Screen Map). The transaction carries the chain id of the
-      network active when Send showed this screen, and keeps it when the screen
-      is drawn again from the saved transaction, so it cannot be signed for
-      another. The screen describes it on that network, whichever network is
-      active: its amounts are in that network's native currency, its USD values
-      are that network's, so a testnet transaction shows none, its From, To and
-      token contract links open that network's explorer, the balance read, the
-      fee estimate and the contract and never-sent recipient checks ask that
-      network's RPC endpoint, and the Etherscan label check asks that network's
-      explorer
-    - "Sign & Send" (correct password) when the gas limit, a fee per gas or the
-      total fee the RPC endpoint fills in at signing is over its bound in
-      `assertWithinCeilings()` (`src/shared/approvalVerify.js`) → nothing is
-      signed; "The gas limit or fee the RPC endpoint quoted for this transaction
-      is more than this wallet will sign for, so it was not sent. Please go back
-      and try again." in its own box, the same sentence for all three, no screen
-      change
+      transaction was reviewed, with this screen open or before the popup
+      reopened onto it → nothing is signed; "The active network changed after
+      this transaction was reviewed, so it was not sent. Please go back and
+      review it again." in the errors box, no screen change. The transaction
+      carries the chain id of the network active when Send showed this screen,
+      and keeps it when the screen is drawn again from the saved transaction, so
+      it cannot be signed for another. The screen describes it on that network,
+      whichever network is active: its amounts are in that network's native
+      currency, its USD values are that network's, so a testnet transaction
+      shows none, its From, To and token contract links open that network's
+      explorer, the fee estimate and the contract and never-sent recipient
+      checks ask that network's RPC endpoint, and the Etherscan label check asks
+      that network's explorer
     - "Sign & Send" (wrong password) → "Wrong password." on the password error
       line, no screen change
     - "Sign & Send" signs as the From address above, not as whichever address is
       selected: the two are saved separately, so the popup can reopen onto this
       screen with another address selected. When the selected wallet does not
-      hold the From address → nothing is signed; "The selected wallet does not
-      hold the From address above, so nothing was sent. Please go back and send
-      again." in its own box, no screen change
+      hold the From address → full-sentence error on the password error line,
+      nothing sent (no screen change)
     - "Sign & Send" (correct password, but the From address's key is refused,
       see Data Model) → nothing is signed → **ErrorTx** saying why
     - "Back" → **Send**
@@ -1891,17 +1825,14 @@ view would leave a wallet one click from deletion.
       no recipient." instead
     - Transaction hash: full hash (tap to copy) + etherscan link
     - Count-up timer: "Waiting for confirmation... Ns"
-- **Behavior**: Polls `getTransactionReceipt` every 10 seconds. The screen
-  describes the transaction on the network it was sent on, whichever network is
-  active: the receipt is asked of that network's RPC endpoint, the one Settings
-  has for it, and the To and hash links open that network's explorer. The wait
-  is persisted: closing and reopening the popup resumes the poll, with the
-  elapsed counter and the timeout deadline still measured from the original
-  broadcast. A lookup that fails is retried on the next tick rather than counted
-  as a missing receipt, because a failed lookup says nothing about the
-  transaction; but six failures in a row (60 seconds at the poll cadence) end
-  the wait, so an RPC that never answers cannot leave it running indefinitely.
-  Any lookup that answers resets that count.
+- **Behavior**: Polls `getTransactionReceipt` every 10 seconds. The wait is
+  persisted: closing and reopening the popup resumes the poll, with the elapsed
+  counter and the timeout deadline still measured from the original broadcast. A
+  lookup that fails is retried on the next tick rather than counted as a missing
+  receipt, because a failed lookup says nothing about the transaction; but six
+  failures in a row (60 seconds at the poll cadence) end the wait, so an RPC
+  that never answers cannot leave it running indefinitely. Any lookup that
+  answers resets that count.
 - **Transitions**:
     - Receipt found → **SuccessTx**
     - A lookup that answers "no receipt" 60 seconds or more after broadcast →
@@ -1966,8 +1897,7 @@ view would leave a wallet one click from deletion.
 #### TransactionDetail (`transaction`)
 
 - **When**: User tapped a transaction row on Home, AddressDetail, or
-  AddressToken. Its etherscan links open the explorer of the network the
-  transaction was sent on, whichever network is active.
+  AddressToken.
 - **Elements** (grouped into logical blocks using light well containers; field
   labels are self-explanatory so groups have no headings):
     - "Transaction" heading, "Back" button
@@ -2006,18 +1936,13 @@ view would leave a wallet one click from deletion.
     - Contract address input
     - Status line ("Looking up token...", cleared or replaced on failure)
     - Common token quick-pick buttons (top 25 by market cap), which fill the
-      contract address input. Shown on Ethereum Mainnet only, because the
-      bundled token list holds mainnet contracts
+      contract address input
     - "Add" button
 - **Transitions**:
     - "Add" (valid contract) → tracks the token, pops the stack, and re-renders
       **AddressDetail**
     - "Add" with a token already tracked, a scam-listed address, or a failed
       contract lookup → flash message, no screen change
-    - "Add", then a network switch in Settings before the contract lookup
-      answers → nothing is tracked; "The active network changed before the
-      lookup finished, so the token was not added." flash message, no screen
-      change
     - "Back" → previous screen (AddressDetail)
 
 #### Settings (`settings`)
@@ -2028,19 +1953,16 @@ view would leave a wallet one click from deletion.
     - Wallets: one row per wallet with its name (tap to rename inline), a
       `[recovery phrase]` button on HD wallets only, and an `[x]` delete button,
       plus a "+ Add wallet" button
-    - Tracked Tokens: one row per token tracked on the active network with an
-      `[x]` remove button, plus a "+ Add token" button
+    - Tracked Tokens: one row per tracked token with an `[x]` remove button,
+      plus a "+ Add token" button
     - Display: "Show tracked tokens with zero balance" checkbox, "UTC
       Timestamps" checkbox, and a Theme selector (System / Light / Dark)
     - Network: network selector (Ethereum Mainnet / Sepolia Testnet). The
       network changes only here, or when the user approves a site's request on
       **NetworkApproval**; either way, switching restores the RPC and Blockscout
       endpoints last used on that network, or that network's defaults if it has
-      none, and the tokens tracked on that network, and sends `chainChanged`
-      with the new chain id to every open tab. A token is tracked only on the
-      network it was added on, because a contract address names a token on one
-      network only. Choosing the network already active changes nothing and
-      sends nothing
+      none, and sends `chainChanged` with the new chain id to every open tab.
+      Choosing the network already active changes nothing and sends nothing
     - Ethereum RPC: endpoint URL input + "Save" button (validated against
       `eth_chainId` before being saved)
     - Blockscout API: endpoint URL input + "Save" button (validated against
@@ -2085,8 +2007,7 @@ view would leave a wallet one click from deletion.
     - `[x]` on a denied site → forgets the refusal, in place; it connects
       nothing and tells the background nothing
     - Ten clicks on the version → reveals the Debug well (no screen change)
-    - "Back" (or Settings gear again) → previous screen (Home); after a network
-      switch, the stack is cut first (see the top of Screen Map)
+    - "Back" (or Settings gear again) → previous screen (Home)
 
 #### ShowRecoveryPhrase (`show-phrase`)
 
@@ -2269,8 +2190,7 @@ view would leave a wallet one click from deletion.
 #### SettingsAddToken (`settings-addtoken`)
 
 - **When**: User tapped "+ Add token" in Settings. Tokens added here are tracked
-  across every address on the active network, unlike AddToken which is reached
-  from one address.
+  across every address, unlike AddToken which is reached from one address.
 - **Elements**:
     - "Back" button, "Add Token" heading
     - Instruction text
@@ -2279,19 +2199,11 @@ view would leave a wallet one click from deletion.
     - "Or pick from top 100:" dropdown (already-tracked tokens are disabled) +
       "Add selected" button
     - "Or enter contract address:" input, a status line, and an "Add" button
-    - The two lists from the bundled token list, "Top tokens:" and "Or pick from
-      top 100:", are shown on Ethereum Mainnet only, because that list holds
-      mainnet contracts. On any other network the contract address is the only
-      add path
 - **Transitions**:
-    - Any of the add paths shown, on success → adds the token and shows an
+    - Any of the three add paths, on success → adds the token and shows an
       "Added SYMBOL" flash message (no screen change)
     - A duplicate, a scam-listed address, or a failed contract lookup → flash
       message, no screen change
-    - "Add" by contract address, then a network switch in Settings before the
-      lookup answers → nothing is tracked; "The active network changed before
-      the lookup finished, so the token was not added." flash message, no screen
-      change
     - "Back" → previous screen (Settings)
 
 #### SiteApproval (`approve-site`)
@@ -2369,16 +2281,14 @@ view would leave a wallet one click from deletion.
       transaction"
     - Decoded action (if calldata is recognized): action name, token details,
       amounts, steps, deadline, and unless a swap pays only the From address, a
-      `Paid to` line for each other address it pays, or saying that a token
-      stays in the router or who it pays is unknown (see Transaction Decoding)
+      `Paid to` line for each other address it pays, or saying who it pays is
+      unknown (see Transaction Decoding)
     - From: color dot + full address + etherscan link
     - Contract: color dot + full address + etherscan link, token symbol label if
       known; for a contract creation, the same sentence as on WaitTx
-    - Value: amount in ETH (4 decimal places with the nonzero floor, USD in
-      parentheses)
-    - Network fee (max): gas limit × fee per gas in ETH (4 decimal places with
-      the nonzero floor, USD in parentheses), with the gas limit and the fee per
-      gas in gwei below it
+    - Value: amount in ETH (4 decimal places, USD in parentheses)
+    - Network fee (max): gas limit × fee per gas in ETH (4 decimal places, USD
+      in parentheses), with the gas limit and the fee per gas in gwei below it
     - Network and nonce
     - Raw data: full calldata displayed inline (shown if present)
     - Password input and an error line
@@ -2510,9 +2420,8 @@ view would leave a wallet one click from deletion.
 - **Transitions**:
     - "Switch" → closes popup; the background switches the network as
       **Settings** does, restoring the RPC and Blockscout endpoints last used on
-      that network (or that network's defaults if it has none) and the tokens
-      tracked on that network, sends `chainChanged` to every open tab, and
-      answers the site with success
+      that network (or that network's defaults if it has none), sends
+      `chainChanged` to every open tab, and answers the site with success
     - "Reject" → closes popup; the site is answered with EIP-1193 code 4001 and
       nothing changes
     - Popup window closed without answering → the same as "Reject"
@@ -2997,137 +2906,36 @@ Currently supported:
   in the parameter shape deployed on mainnet and Sepolia, not in the newer one
   on `v4-periphery` `main`, which adds a `minHopPriceX36` field. An action in
   any other shape is not read, and its step is listed as
-  `V4 Swap (could not be decoded)`. Each step is named and read as the command
-  that the release of the router at that address runs for its command type, as
-  that release's `contracts/libraries/Commands.sol` names it. The decoder reads
-  the type from the command byte with the mask that router uses: `0x1f` for
-  `UniversalRouterV1`, `0x3f` for `UniversalRouterV1_2_V2Support` and
-  `UniversalRouterV2`, and `0x7f` for `UniversalRouterV2_1_1` and
-  `UniversalRouterV2_1_2`. The allow-revert flag (`0x80`) therefore does not
-  change the command a step is read as. Releases run different commands for some
-  types: on `UniversalRouterV1` and `UniversalRouterV1_2_V2Support`, `0x10` to
-  `0x13` are NFT commands, where the later routers run `V4_SWAP`,
-  `V3_POSITION_MANAGER_PERMIT`, `V3_POSITION_MANAGER_CALL` and
-  `V4_INITIALIZE_POOL`. The decoder does not read those routers' NFT commands,
-  and lists each by its name there, for example `Seaport` for `SEAPORT` (`0x10`
-  on `UniversalRouterV1`). A type a release names no command for is listed by
-  its number, for example `Command 0x0e` on `UniversalRouterV1`, which has no
-  `BALANCE_CHECK_ERC20` and reverts on it. The router reverts the whole
-  transaction when a step fails, unless the step's command byte has that flag
-  set and its command is one the router lets fail, as each release's
-  `contracts/base/Dispatcher.sol` shows: on `UniversalRouterV2`,
-  `UniversalRouterV2_1_1` and `UniversalRouterV2_1_2`, `PERMIT2_PERMIT`,
-  `PERMIT2_PERMIT_BATCH`, `BALANCE_CHECK_ERC20`, `V3_POSITION_MANAGER_PERMIT`,
-  `V3_POSITION_MANAGER_CALL`, `V4_INITIALIZE_POOL`, `V4_POSITION_MANAGER_CALL`
-  and `EXECUTE_SUB_PLAN`; on `UniversalRouterV1_2_V2Support`,
-  `BALANCE_CHECK_ERC20`, `EXECUTE_SUB_PLAN` and its NFT market calls and NFT
-  owner checks; on `UniversalRouterV1`, its NFT market calls and NFT owner
-  checks. Such a step may then fail while the transaction goes on to the next
-  step, and it is listed with ` (allowed to fail)` after its name, for example
-  `Balance Check (allowed to fail)`. On every other command, among them each V2,
-  V3 and V4 swap and each payment of ETH or an ERC-20 token, the flag has no
-  effect: the step succeeds or the whole transaction reverts, so the step reads
-  as it does without the flag. A `BALANCE_CHECK_ERC20` the router lets fail
-  guarantees nothing, so it is read as one whose `minBalance` is zero. Only the
-  routers with the `0x7f` mask have `PAY_PORTION_FULL_PRECISION` (`0x07`),
-  listed as `Pay Portion (Full Precision)`, and `ACROSS_V4_DEPOSIT_V3` (`0x40`),
-  listed as `Across Bridge Deposit`; the other routers revert on `0x07`, and it
-  is listed there as `Command 0x07`. The decoder does not read the commands
-  inside an `EXECUTE_SUB_PLAN` (`0x21`) step, and wherever that step stands they
-  may spend the user's tokens or pay the user. That step is listed as
-  `Execute Sub-Plan (its steps are not shown)`, and whatever the other steps
-  state, the summary names no swap direction, `Token In` and `Token Out` read
-  `Unknown (could not be decoded)`, and there is no `Amount` or `Min. received`
-  line. Each swap step, `SWEEP`, `WRAP_ETH`, `UNWRAP_WETH`, `TRANSFER`,
-  `PAY_PORTION`, `PAY_PORTION_FULL_PRECISION`, `PERMIT2_TRANSFER_FROM` (which
-  moves the user's own tokens) and V4 `TAKE` and `TAKE_PORTION` names the
-  address it pays, and `TAKE_ALL` pays the transaction's sender. The router
-  reads `address(1)` as the transaction's sender, and `address(2)` as the router
-  itself, which holds what it is paid until a later step pays it out; a payment
-  to the router, as `address(2)` or by its own address, is not counted as paid
-  out. `UniversalRouterV1` alone pays a `PERMIT2_TRANSFER_FROM` to `address(1)`
-  or `address(2)` as those addresses, and the decoder names them. A
-  `PERMIT2_TRANSFER_FROM` into the router is named with the amount it moves,
-  because the decoder does not check that later steps spend all of it.
-  `ACROSS_V4_DEPOSIT_V3` pays the bridge, which pays the deposit's recipient on
-  another network and refunds a deposit nobody fills to its depositor; the
-  router passes both on as written, so `address(1)` and `address(2)` there are
-  addresses, and each that is not the transaction's sender is named. A
-  `BALANCE_CHECK_ERC20` pays nobody: the router checks that its owner holds at
-  least `minBalance` of its token, and reads the owner as written, so
-  `address(1)` and `address(2)` there are addresses too. A check of any address
-  but the transaction's sender's says nothing about what the user receives: it
-  sets neither `Token Out` nor the minimum, and it is listed as
-  `Balance Check (of another address)`. A check whose input does not decode,
-  such as one whose owner word has a nonzero top byte (the router reads the
-  owner from the word's last 20 bytes), likewise sets neither, and it is listed
-  as `Balance Check (could not be decoded)`. When a swap step, `TAKE` or
-  `TAKE_PORTION` pays the router any token, the swap's output or another, a
-  `WRAP_ETH` pays it WETH, or an `UNWRAP_WETH` into the router turns WETH a step
-  paid it into ETH, that token stays in the router unless a later step pays out
-  or spends all the router holds of it: a `SWEEP` of that token to anyone but
-  the router, an `UNWRAP_WETH` when it is WETH, a `WRAP_ETH` of
-  `CONTRACT_BALANCE` when it is ETH, a `TRANSFER` of `CONTRACT_BALANCE`, a
-  `PAY_PORTION` of 10,000 bips or a `PAY_PORTION_FULL_PRECISION` of 1e18 of that
-  token to anyone but the router, an `ACROSS_V4_DEPOSIT_V3` of
-  `CONTRACT_BALANCE` of that token, or of ETH when it sets `useNative`, or a V2
-  or V3 exact-in swap step or V4 `SETTLE` that pays `CONTRACT_BALANCE` of that
-  token from the router (`payerIsUser` false). V2 and V3 exact-in swap steps and
-  V4 `SETTLE`s that pay WETH from the router also spend all the WETH a
-  `WRAP_ETH` paid it once together they spend the amount the `WRAP_ETH` states,
-  as a swap paid in ETH does, but only when that amount is not
-  `CONTRACT_BALANCE` and the router held no WETH from an earlier step when the
-  `WRAP_ETH` ran: after two `WRAP_ETH`s of 0.5 ETH into the router, a swap of 1
-  WETH from it reads as leaving the WETH there. The router pays a `SETTLE` of
-  `OPEN_DELTA` (zero) only what its step still owes of that token when the
-  `SETTLE` runs, so one from the router counts as spending the amounts the
-  step's swap actions state they spend of that token only when every action in
-  the step could be read, every swap action names the token it spends and the
-  token it buys (a swap action with an empty path swaps nothing), the `SETTLE`
-  is the step's only `SETTLE` or `SETTLE_ALL` of that token and comes after
-  every swap action, no swap action buys that token, and the swap actions that
-  spend it state a quantity together; otherwise it counts as spending nothing.
-  So the rest of a V4 `SETTLE` of more than its swap spends, taken to the
-  router, the WETH of a `WRAP_ETH`, and a token a swap pays the router on the
-  way to the output, each stays in the router when later steps do not spend all
-  of it, where anyone can take it in a later transaction. The router sends ETH
-  as written, so a `TRANSFER` of `CONTRACT_BALANCE` of ETH always reverts and
-  pays out nothing. A step paying a token to the V2 pair that the very next step
-  spends, as a V2 exact-in of that token whose `amountIn` is `ALREADY_PAID`
-  (zero) or `CONTRACT_BALANCE`, is a hop, not a payout: Uniswap's mixed routes
-  pay the next V2 pair directly, and the router enforces that swap's own
-  minimum. The decoder checks that the address paid is that pair, deriving it
-  from the V2 factory and pair init code hash the network's routers were
-  deployed with and the first two tokens of that step's path; a payment to any
-  other address is named. (Sepolia's `UniversalRouterV1_2_V2Support` was
-  deployed with placeholders for both values, so no V2 swap step can succeed on
-  that router.) Every other payment counts, in whichever step and of whatever
-  token, a share of the output included: an interface fee paid to another
-  address by `PAY_PORTION`, `TRANSFER` or `TAKE_PORTION` is named, and the
-  minimum reads `Min. paid out`, because the swap's minimum includes the fee.
-  The minimum reads `Min. received` only when some step pays the transaction's
-  sender (the From address on TxApproval, the sender the explorer reports on
-  TransactionDetail) and no `Paid to` line is shown. `Paid to` lines after
-  `Token Out` name each other address paid; one reads
-  `The bridge, which pays the deposit's recipient on another network` for a
-  bridge deposit; one reads, for example,
-  `The router, 2000.0000 USDT from the sender (later steps may not spend all of it)`
-  for each move into the router, followed by a `Token moved into the router`
-  line that gives the moved token's address as the `Token In` line does; one
-  reads `The router, where it stays (no later step pays it out)` for each token
-  that stays in the router, followed, for any token but the output, by a
-  `Token moved into the router` line giving that token in the same way (ETH by
-  name); and one more reads `Unknown (could not be decoded)` when a step that
-  may pay an address went unread. When no step pays anyone, a single line reads
-  `Unknown (not named in the calldata)`. Wherever there is a `Paid to` line, the
-  minimum reads `Min. paid out`. A step goes unread when its recipient does not
-  decode as an address, or when it is a command the decoder does not read: every
-  command other than `PERMIT2_PERMIT`, `PERMIT2_TRANSFER_FROM`,
-  `V2_SWAP_EXACT_IN`, `V2_SWAP_EXACT_OUT`, `V3_SWAP_EXACT_IN`, `V4_SWAP`,
-  `SWEEP`, `TRANSFER`, `PAY_PORTION`, `PAY_PORTION_FULL_PRECISION`,
-  `ACROSS_V4_DEPOSIT_V3`, `WRAP_ETH`, `UNWRAP_WETH` and `BALANCE_CHECK_ERC20`
-  (`V3_SWAP_EXACT_OUT`, `PERMIT2_TRANSFER_FROM_BATCH`, `EXECUTE_SUB_PLAN` and
-  the NFT commands among them), or a type its release names no command for.
+  `V4 Swap (could not be decoded)`. Each step is named by its command type,
+  which the decoder reads from the command byte with the mask the router at that
+  address uses: `0x1f` for `UniversalRouterV1`, `0x3f` for
+  `UniversalRouterV1_2_V2Support` and `UniversalRouterV2`, and `0x7f` for
+  `UniversalRouterV2_1_1` and `UniversalRouterV2_1_2`. The allow-revert flag
+  (`0x80`) therefore does not change a step's name. The decoder does not read
+  the commands inside an `EXECUTE_SUB_PLAN` (`0x21`) step, and wherever that
+  step stands they may spend the user's tokens or pay the user. That step is
+  listed as `Execute Sub-Plan (its steps are not shown)`, and whatever the other
+  steps state, the summary names no swap direction, `Token In` and `Token Out`
+  read `Unknown (could not be decoded)`, and there is no `Amount` or
+  `Min. received` line. Each swap step, `SWEEP`, `WRAP_ETH`, `UNWRAP_WETH` and
+  V4 `TAKE` names the address it pays, and `TAKE_ALL` pays the transaction's
+  sender. The router reads `address(1)` as the transaction's sender, and
+  `address(2)` as the router itself, which holds what it is paid until a later
+  step pays it out; a payment to the router, as `address(2)` or by its own
+  address, is not counted as paid out. Every payment counts, in whichever step
+  and of whatever token. The minimum reads `Min. received` only when some step
+  pays the transaction's sender (the From address on TxApproval, the sender the
+  explorer reports on TransactionDetail), no step pays any other address, and no
+  step that may pay an address went unread. Otherwise it reads `Min. paid out`,
+  a `Paid to` line after `Token Out` names each other address paid, and one more
+  `Paid to` line reads `Unknown (could not be decoded)` when such a step went
+  unread, or `Unknown (not named in the calldata)` when no step pays anyone. A
+  step goes unread when its recipient does not decode as an address, or when it
+  is a command or V4 action the decoder does not read: every command other than
+  `PERMIT2_PERMIT`, `V2_SWAP_EXACT_IN`, `V2_SWAP_EXACT_OUT`, `V3_SWAP_EXACT_IN`,
+  `V4_SWAP`, `SWEEP`, `WRAP_ETH`, `UNWRAP_WETH` and `BALANCE_CHECK_ERC20`
+  (`V3_SWAP_EXACT_OUT`, `TRANSFER`, `PAY_PORTION` and `EXECUTE_SUB_PLAN` among
+  them), and V4 `TAKE_PORTION`.
 
 ### Non-Goals Forever
 

src/popup/index.html

@@ -664,20 +664,6 @@
                     id="confirm-errors"
                     class="mb-2 border border-border border-dashed p-2 invisible min-h-[1.25rem]"
                 ></div>
-                <!-- Its sentence names the token, or why the token's balance
-                is unknown, so show() in confirmTx.js sets it. -->
-                <div
-                    id="confirm-balance-error"
-                    class="mb-2 border border-border border-dashed p-2 text-xs invisible"
-                ></div>
-                <div
-                    id="confirm-balance-read-error"
-                    class="mb-2 border border-border border-dashed p-2 text-xs invisible"
-                >
-                    Your balance could not be read from the network, so this
-                    transaction cannot be checked against it. Please go back and
-                    try again.
-                </div>
                 <div
                     id="confirm-amount-fee-error"
                     class="mb-2 border border-border border-dashed p-2 text-xs invisible"
@@ -697,33 +683,6 @@
                     id="confirm-fee-unknown-error"
                     class="mb-2 border border-border border-dashed p-2 text-xs invisible"
                 ></div>
-                <!-- Shown when Sign & Send refuses a send for its network, for
-                a From address the selected wallet does not hold, or for its
-                gas limit or fee. Each holds its space from the first paint, so
-                the refusal moves nothing. -->
-                <div
-                    id="confirm-network-changed-error"
-                    class="mb-2 border border-border border-dashed p-2 text-xs invisible"
-                >
-                    The active network changed after this transaction was
-                    reviewed, so it was not sent. Please go back and review it
-                    again.
-                </div>
-                <div
-                    id="confirm-from-address-error"
-                    class="mb-2 border border-border border-dashed p-2 text-xs invisible"
-                >
-                    The selected wallet does not hold the From address above, so
-                    nothing was sent. Please go back and send again.
-                </div>
-                <div
-                    id="confirm-fee-bound-error"
-                    class="mb-2 border border-border border-dashed p-2 text-xs invisible"
-                >
-                    The gas limit or fee the RPC endpoint quoted for this
-                    transaction is more than this wallet will sign for, so it
-                    was not sent. Please go back and try again.
-                </div>
                 <div class="mb-2">
                     <label class="block mb-1 text-xs">Password</label>
                     <input
@@ -879,7 +838,7 @@
                     id="add-token-info"
                     class="text-xs text-muted mb-2 min-h-[1.25rem] invisible"
                 ></div>
-                <div id="add-token-common" class="mb-2">
+                <div class="mb-2">
                     <label class="block mb-1 text-xs text-muted"
                         >Or pick a common token:</label
                     >
@@ -1363,39 +1322,36 @@
                 <h2 class="font-bold mb-2">Add Token</h2>
                 <p class="text-xs text-muted mb-3">
                     Pick a common token or enter a contract address manually.
-                    Common tokens are offered on Ethereum Mainnet only.
                 </p>
 
-                <div id="settings-addtoken-common">
-                    <!-- top 10 quick-pick buttons -->
-                    <div class="mb-3">
-                        <label class="block mb-1 text-xs text-muted"
-                            >Top tokens:</label
-                        >
-                        <div
-                            id="settings-addtoken-top10"
-                            class="flex flex-wrap gap-1"
-                        ></div>
-                    </div>
+                <!-- top 10 quick-pick buttons -->
+                <div class="mb-3">
+                    <label class="block mb-1 text-xs text-muted"
+                        >Top tokens:</label
+                    >
+                    <div
+                        id="settings-addtoken-top10"
+                        class="flex flex-wrap gap-1"
+                    ></div>
+                </div>
 
-                    <!-- top 100 dropdown -->
-                    <div class="mb-3">
-                        <label class="block mb-1 text-xs text-muted"
-                            >Or pick from top 100:</label
-                        >
-                        <select
-                            id="settings-addtoken-select"
-                            class="border border-border p-1 w-full font-mono text-sm bg-bg text-fg"
-                        >
-                            <option value="">-- select --</option>
-                        </select>
-                        <button
-                            id="btn-settings-addtoken-select"
-                            class="border border-border px-2 py-1 mt-1 hover:bg-fg hover:text-bg cursor-pointer"
-                        >
-                            Add selected
-                        </button>
-                    </div>
+                <!-- top 100 dropdown -->
+                <div class="mb-3">
+                    <label class="block mb-1 text-xs text-muted"
+                        >Or pick from top 100:</label
+                    >
+                    <select
+                        id="settings-addtoken-select"
+                        class="border border-border p-1 w-full font-mono text-sm bg-bg text-fg"
+                    >
+                        <option value="">-- select --</option>
+                    </select>
+                    <button
+                        id="btn-settings-addtoken-select"
+                        class="border border-border px-2 py-1 mt-1 hover:bg-fg hover:text-bg cursor-pointer"
+                    >
+                        Add selected
+                    </button>
                 </div>
 
                 <!-- manual contract address -->

src/popup/viewRouter.js

@@ -38,11 +38,9 @@ function markViewRendered(view) {
     if (view) renderedViews.add(view);
 }
 
-// Begin a fresh page-load scope. The popup gets one by being loaded, and
-// asks for one when the user switches the network, because every screen
-// then on the page shows the previous network (views/settings.js); the
+// Begin a fresh page-load scope. The popup gets one by being loaded; the
 // unit tests, which simulate several page loads against one module
-// instance, ask for one too.
+// instance, ask for one.
 function resetRenderedViews() {
     renderedViews.clear();
 }
@@ -127,33 +125,28 @@ function isRenderableDecoded(value) {
 }
 
 // The pending transaction confirmTx.show() renders: `token` reaches
-// renderAddressHtml() when it is not "ETH", `from`/`to` reach
-// addressTitle(), makeBlockie() and getLocalWarnings(), and `amount` reaches
-// truncateAmountNeverZero(), which splits it. `chainId`, which show() fills in
-// when it is absent, picks the network whose explorer the address links open,
-// so it has to name one.
+// renderAddressHtml() when it is not "ETH", and `from`/`to` reach
+// addressTitle(), makeBlockie() and getLocalWarnings(). `chainId`, which
+// show() fills in when it is absent, picks the network whose explorer the
+// address links open, so it has to name one.
 function isRenderablePendingTx(value) {
     return (
         isRecord(value) &&
         isText(value.token) &&
         isAddressText(value.from) &&
         isAddressText(value.to) &&
-        isText(value.amount) &&
         (!value.chainId || SUPPORTED_CHAIN_IDS.has(value.chainId))
     );
 }
 
 // The stored transaction transactionDetail.render() shows. contractAddress is
 // optional on an ETH transfer, and reaches addressDotHtml() when it is there.
-// `chainId` picks the network whose explorer the links open, so when it is
-// there it has to name one.
 function isRenderableTx(value) {
     return (
         isRecord(value) &&
         isAddressText(value.from) &&
         isAddressText(value.to) &&
-        (!value.contractAddress || isAddressText(value.contractAddress)) &&
-        (!value.chainId || SUPPORTED_CHAIN_IDS.has(value.chainId))
+        (!value.contractAddress || isAddressText(value.contractAddress))
     );
 }
 
@@ -224,10 +217,9 @@ function renderView(view, state, views) {
 // in the two cases where the view is known to be on the page already:
 //
 //   - It is not one the popup renders from persisted state. The restored
-//     stack is filtered against RESTORABLE_VIEWS, and a network switch cuts
-//     it the same way (views/settings.js), so such a view can only be on the
-//     stack from this page load, where forward navigation rendered it on the
-//     way in.
+//     stack is filtered against RESTORABLE_VIEWS, so such a view can only
+//     be on the stack from this page load, where forward navigation
+//     rendered it on the way in.
 //   - This page load has rendered it. Re-rendering would re-fetch and
 //     clobber what it holds; Home is rendered anyway, see above.
 //

src/popup/views/addToken.js

@@ -1,6 +1,6 @@
 const { $, showView, showFlash, escapeHtml, goBack } = require("./helpers");
 const { getTopTokens } = require("../../shared/tokenList");
-const { state, saveState, currentNetwork } = require("../../shared/state");
+const { state, saveState } = require("../../shared/state");
 const { lookupTokenInfo } = require("../../shared/balances");
 const { isScamAddress } = require("../../shared/scamlist");
 const { log } = require("../../shared/log");
@@ -9,12 +9,6 @@ function show() {
     $("add-token-address").value = "";
     $("add-token-info").textContent = "";
     $("add-token-info").style.visibility = "hidden";
-    // The bundled list holds Ethereum Mainnet contracts, which name no token
-    // on any other network.
-    $("add-token-common").classList.toggle(
-        "hidden",
-        state.networkId !== "mainnet",
-    );
     const list = $("common-token-list");
     list.innerHTML = getTopTokens(25)
         .map(
@@ -52,9 +46,6 @@ function init(ctx) {
         infoEl.textContent = "Looking up token...";
         infoEl.style.visibility = "visible";
         log.debugf("Looking up token contract", contractAddr);
-        // The network the lookup asks, which Settings may switch away from
-        // before it answers, as for a transaction in confirmTx.js.
-        const chainId = currentNetwork().chainId;
         try {
             const info = await lookupTokenInfo(
                 contractAddr,
@@ -62,15 +53,6 @@ function init(ctx) {
                 state.networkId,
                 ctx.pageClosed,
             );
-            // A contract address names a token on one network only, so an
-            // answer after a switch is not added to the new network's list.
-            if (currentNetwork().chainId !== chainId) {
-                showFlash(
-                    "The active network changed before the lookup finished," +
-                        " so the token was not added.",
-                );
-                return;
-            }
             log.infof("Adding token", info.symbol, contractAddr);
             state.trackedTokens.push({
                 address: contractAddr,

src/popup/views/confirmTx.js

@@ -2,13 +2,7 @@
 // Shows transaction details, warnings, errors. On Sign & Send,
 // reads inline password, decrypts secret, signs and broadcasts.
 
-const {
-    parseEther,
-    parseUnits,
-    formatEther,
-    formatUnits,
-    Contract,
-} = require("ethers");
+const { parseEther, parseUnits, formatEther, Contract } = require("ethers");
 const {
     $,
     showError,
@@ -23,10 +17,12 @@ const {
     goBack,
     onViewLeave,
     formatFee,
-    reviewedNetworkProvider,
 } = require("./helpers");
 const { state, currentNetwork } = require("../../shared/state");
-const { nativeCurrencyByChainId } = require("../../shared/networks");
+const {
+    networkByChainId,
+    nativeCurrencyByChainId,
+} = require("../../shared/networks");
 const { getSignerForAddress } = require("../../shared/wallet");
 const { walletDefect } = require("../../shared/walletDefects");
 const { decryptWithPassword } = require("../../shared/vault");
@@ -39,12 +35,11 @@ const {
 const { ERC20_ABI, isBurnAddress } = require("../../shared/constants");
 const {
     displayedDecimals,
-    toDecimals,
     transferAmountUnits,
 } = require("../../shared/transferAmount");
 const { assertWithinCeilings } = require("../../shared/approvalVerify");
-// The amount, the balance line and the fee reserve go through it, as the
-// approval screen's amounts do.
+// The balance lines, the fee reserve and the insufficient-balance messages go
+// through it, as the approval screen's amounts do.
 const { truncateAmountNeverZero } = require("../../shared/amountDisplay");
 const {
     CODES,
@@ -68,13 +63,6 @@ let feeWei = null;
 // amount was derived from. Null for any other send, which ethers prices from
 // the node at signing time.
 let maxSendFees = null;
-// The From address's balances on the network this screen is drawn for, read
-// from that network's node by readBalances() each time the screen is shown,
-// so a screen the popup reopens onto states them as they are then, not as
-// Send knew them. Null until the read returns; then `eth` and `token` are
-// decimal strings, `token` null for an ETH send or a token whose scale is
-// unknown, and both null if the read failed.
-let balances = null;
 
 function restore() {
     const d = state.viewData;
@@ -98,32 +86,8 @@ function valueWithUsd(text, usdAmount) {
     return text;
 }
 
-// The amount as this screen and the wait, success and error screens show it,
-// written as the approval screen writes a site's amount: the amount being
-// signed, parsed at the scale it is encoded with and written back as plain
-// decimal text, then cut to four decimals with the nonzero floor. So `.5` and
-// `00.5` read `0.5000`, as `0.5` does, except for a token whose scale is
-// unknown, which cannot be sent: its amount is cut as typed, so `.5` reads
-// `.5000`. txInfo.amount, which is what gets signed, is left as it is.
-function shownAmount(txInfo) {
-    let exact = txInfo.amount;
-    try {
-        if (txInfo.token === "ETH") {
-            exact = formatEther(parseEther(txInfo.amount));
-        } else {
-            const decimals = displayedDecimals(txInfo.tokenDecimals);
-            exact = formatUnits(parseUnits(txInfo.amount, decimals), decimals);
-        }
-    } catch {
-        // A token whose scale is unknown, which is never signed, or an amount
-        // the amount check refuses: cut as Send's amount field held it.
-    }
-    return truncateAmountNeverZero(exact);
-}
-
-// The Amount line, with its USD value, which is priced from the exact amount.
-// A max ETH send's line is drawn again once its amount is re-derived from the
-// fee estimate.
+// The Amount line, with its USD value. A max ETH send's line is drawn again
+// once its amount is re-derived from the fee estimate.
 function renderAmount(txInfo) {
     const isErc20 = txInfo.token !== "ETH";
     const rawSymbol = isErc20
@@ -132,53 +96,23 @@ function renderAmount(txInfo) {
     const price = getPrice(isErc20 ? rawSymbol : "ETH", txInfo.chainId);
     const amountUsd = price ? parseFloat(txInfo.amount) * price : null;
     $("confirm-amount").textContent = valueWithUsd(
-        shownAmount(txInfo) + " " + displaySymbol(rawSymbol),
+        txInfo.amount + " " + displaySymbol(rawSymbol),
         amountUsd,
     );
 }
 
-// The balance line, with its USD value: "Loading..." until readBalances()
-// returns, then the balance it read.
-function renderBalance(txInfo) {
-    const isErc20 = txInfo.token !== "ETH";
-    const rawSymbol = isErc20
-        ? txInfo.tokenSymbol || "?"
-        : nativeCurrencyByChainId(txInfo.chainId);
-    const symbol = displaySymbol(rawSymbol);
-    if (balances === null) {
-        $("confirm-balance").textContent = "Loading...";
-        return;
-    }
-    // A null balance is one nobody established, for a token whose scale is
-    // unknown or after a read that failed, and is stated as unknown, never as
-    // zero (https://git.eeqj.de/sneak/AutistMask/issues/349).
-    const bal = isErc20 ? balances.token : balances.eth;
-    if (bal === null) {
-        $("confirm-balance").textContent = "unknown (" + symbol + ")";
-        return;
-    }
-    const price = getPrice(isErc20 ? rawSymbol : "ETH", txInfo.chainId);
-    const balUsd = price ? parseFloat(bal) * price : null;
-    $("confirm-balance").textContent = valueWithUsd(
-        truncateAmountNeverZero(bal) + " " + symbol,
-        balUsd,
-    );
-}
-
 function show(txInfo) {
     pendingTx = txInfo;
     feeStatus = FEE_PENDING;
     feeWei = null;
     maxSendFees = null;
-    balances = null;
     // The network this screen is drawn for, and the only one it sends on: the
     // one active when Send handed the transaction over. Drawn again from the
     // saved transaction, as when the popup reopens onto this screen, it keeps
     // that network, so Sign & Send refuses once Settings has switched to
     // another. Everything this screen shows is that network's: native
-    // currency, USD values, explorer links, the balance, and the node and
-    // explorer its checks ask. The wait, success and error screens label
-    // amounts by it.
+    // currency, USD values, explorer links, and the node and explorer its
+    // checks ask. The wait, success and error screens label amounts by it.
     if (!txInfo.chainId) txInfo.chainId = currentNetwork().chainId;
 
     const isErc20 = txInfo.token !== "ETH";
@@ -231,7 +165,33 @@ function show(txInfo) {
     $("confirm-to-ens").classList.add("hidden");
 
     renderAmount(txInfo);
-    renderBalance(txInfo);
+
+    // Balance (with inline USD)
+    const ethPrice = getPrice("ETH", txInfo.chainId);
+    const tokenPrice = getPrice(rawSymbol, txInfo.chainId);
+    if (isErc20) {
+        // null is a balance whose scale nothing knows, not a balance of zero
+        // (https://git.eeqj.de/sneak/AutistMask/issues/349). The send is
+        // refused at encode time for the same missing scale; what this line
+        // must not do is state a quantity nobody established.
+        const bal = txInfo.tokenBalance;
+        const balUsd =
+            tokenPrice && bal != null ? parseFloat(bal) * tokenPrice : null;
+        $("confirm-balance").textContent =
+            bal == null
+                ? "unknown (" + symbol + ")"
+                : valueWithUsd(
+                      truncateAmountNeverZero(bal) + " " + symbol,
+                      balUsd,
+                  );
+    } else {
+        const bal = txInfo.balance || "0";
+        const balUsd = ethPrice ? parseFloat(bal) * ethPrice : null;
+        $("confirm-balance").textContent = valueWithUsd(
+            truncateAmountNeverZero(bal) + " " + symbol,
+            balUsd,
+        );
+    }
 
     // Check for warnings (synchronous local checks)
     const localWarnings = getLocalWarnings(txInfo.to, {
@@ -297,29 +257,11 @@ function show(txInfo) {
               " cannot be checked against your balance. Please go back and" +
               " try again.";
 
-    // So does the message for an amount the balance does not cover. It is
-    // set here, before the first paint, so the balance read returning only
-    // makes it visible and moves nothing, which is why it quotes no balance.
-    // Without the token's scale readBalances() reads no token balance.
-    $("confirm-balance-error").textContent =
-        isErc20 && toDecimals(txInfo.tokenDecimals) === null
-            ? "This token's balance is unknown, because nothing this wallet" +
-              " can consult reports how many decimal places it uses, so the" +
-              " amount you are trying to send cannot be checked against it."
-            : "Your " +
-              symbol +
-              " balance does not cover this amount. Please go back and send" +
-              " a smaller amount.";
-
     renderValidation(txInfo);
 
-    // Reset password field and error, and any refusal of an earlier Sign &
-    // Send.
+    // Reset password field and error
     $("confirm-tx-password").value = "";
     hideError("confirm-tx-password-error");
-    setVisible("confirm-network-changed-error", false);
-    setVisible("confirm-from-address-error", false);
-    setVisible("confirm-fee-bound-error", false);
 
     // Gas estimate — show placeholder then fetch async
     $("confirm-fee").style.visibility = "visible";
@@ -340,78 +282,69 @@ function show(txInfo) {
         $("confirm-burn-warning").style.visibility = "visible";
     }
 
-    // The fee is estimated once the balances are read, because a max ETH
-    // send's amount is the ETH balance minus the estimate's reserve.
-    readBalances(txInfo).then(() => estimateGas(txInfo));
+    estimateGas(txInfo);
     checkRecipientHistory(txInfo);
 }
 
-// Read the From address's balances from the node of the network this
-// transaction was reviewed for: ETH, and for a token send the token, at the
-// scale the screen renders the amount with. A token whose scale is unknown has
-// no balance to read. Never rejects.
-async function readBalances(txInfo) {
-    let read;
-    try {
-        const provider = reviewedNetworkProvider(txInfo);
-        const decimals = toDecimals(txInfo.tokenDecimals);
-        const readToken = txInfo.token !== "ETH" && decimals !== null;
-        const [ethWei, tokenUnits] = await Promise.all([
-            provider.getBalance(txInfo.from),
-            readToken
-                ? new Contract(txInfo.token, ERC20_ABI, provider).balanceOf(
-                      txInfo.from,
-                  )
-                : null,
-        ]);
-        read = {
-            eth: formatEther(ethWei),
-            token: readToken ? formatUnits(tokenUnits, decimals) : null,
-        };
-    } catch (e) {
-        log.errorf("balance read failed:", e.shortMessage || e.message);
-        read = { eth: null, token: null };
-    }
-    // The user may have left this transaction while the read was in flight.
-    if (pendingTx !== txInfo) return;
-    balances = read;
-    renderBalance(txInfo);
-    renderValidation(txInfo);
-}
-
 // Render the balance check for the transaction on screen. Called once during
-// show(), again when the balances are read, and again when the fee estimate
-// resolves or fails. Every element it touches already occupies its space, so
-// re-running it never moves anything.
+// show() and again when the fee estimate resolves or fails. Every element it
+// touches already occupies its space, so re-running it never moves anything.
 function renderValidation(txInfo) {
     const isErc20 = txInfo.token !== "ETH";
-
-    // Null while the balances are being read and after a read that failed.
-    // validateTransfer() takes a missing balance as nothing to spend from, so
-    // sending stays blocked either way, and the only message shown for it is
-    // the one saying the read failed.
-    const ethBalance = balances ? balances.eth : null;
-    const tokenBalance = balances ? balances.token : null;
-    const balanceRead = ethBalance !== null;
+    const symbol = isErc20
+        ? displaySymbol(txInfo.tokenSymbol || "?")
+        : nativeCurrencyByChainId(txInfo.chainId);
 
     const { canSend, codes } = validateTransfer({
         isErc20,
         amount: txInfo.amount,
         tokenDecimals: txInfo.tokenDecimals,
-        ethBalance,
-        tokenBalance,
+        ethBalance: txInfo.balance,
+        tokenBalance: txInfo.tokenBalance,
         feeStatus,
         feeWei,
     });
 
-    // An invalid amount is known before the first paint, so its message is
-    // written here. Every message a later result brings has a reserved
-    // element, its sentence fixed in index.html or set by show(), and is only
-    // made visible below, so nothing moves when the result arrives.
+    // Messages carrying the user's own numbers are built here; the fixed
+    // sentences live in the reserved elements in index.html, except the
+    // gas and fee-unknown ones, which show() sets.
     const messages = [];
     if (codes.includes(CODES.AMOUNT_INVALID)) {
         messages.push("Please enter a valid amount to send.");
     }
+    if (codes.includes(CODES.INSUFFICIENT_TOKEN)) {
+        messages.push(
+            txInfo.tokenBalance == null
+                ? "This token's balance is unknown, because nothing this" +
+                      " wallet can consult reports how many decimal places it" +
+                      " uses, so the amount you are trying to send cannot be" +
+                      " checked against it."
+                : "Insufficient " +
+                      symbol +
+                      " balance. You have " +
+                      truncateAmountNeverZero(txInfo.tokenBalance) +
+                      " " +
+                      symbol +
+                      " but are trying to send " +
+                      txInfo.amount +
+                      " " +
+                      symbol +
+                      ".",
+        );
+    }
+    if (codes.includes(CODES.INSUFFICIENT_ETH)) {
+        messages.push(
+            "Insufficient balance. You have " +
+                truncateAmountNeverZero(txInfo.balance || "0") +
+                " " +
+                symbol +
+                " but are trying to send " +
+                txInfo.amount +
+                " " +
+                symbol +
+                ".",
+        );
+    }
 
     const errorsEl = $("confirm-errors");
     if (messages.length > 0) {
@@ -424,20 +357,13 @@ function renderValidation(txInfo) {
         errorsEl.style.visibility = "hidden";
     }
 
-    setVisible("confirm-balance-read-error", balances !== null && !balanceRead);
-    setVisible(
-        "confirm-balance-error",
-        balanceRead &&
-            (codes.includes(CODES.INSUFFICIENT_TOKEN) ||
-                codes.includes(CODES.INSUFFICIENT_ETH)),
-    );
     setVisible(
         "confirm-amount-fee-error",
-        balanceRead && codes.includes(CODES.INSUFFICIENT_ETH_WITH_FEE),
+        codes.includes(CODES.INSUFFICIENT_ETH_WITH_FEE),
     );
     setVisible(
         "confirm-gas-error",
-        balanceRead && codes.includes(CODES.INSUFFICIENT_ETH_FOR_FEE),
+        codes.includes(CODES.INSUFFICIENT_ETH_FOR_FEE),
     );
     setVisible(
         "confirm-fee-unknown-error",
@@ -456,6 +382,20 @@ function setVisible(id, visible) {
     $(id).style.visibility = visible ? "visible" : "hidden";
 }
 
+// The node of the network this transaction was reviewed for, which need not be
+// the active one: the popup can reopen onto this screen after Settings switched
+// the network. Its RPC URL is the one Settings has for that network: the
+// active network's is state.rpcUrl, any other's the one remembered for it (see
+// applyChainSwitchFields()).
+function reviewedNetworkProvider(txInfo) {
+    const net = networkByChainId(txInfo.chainId);
+    if (net.id === state.networkId) {
+        return getProvider(state.rpcUrl, net.id);
+    }
+    const remembered = state.networkEndpoints[net.id] || {};
+    return getProvider(remembered.rpcUrl || net.defaultRpcUrl, net.id);
+}
+
 async function estimateGas(txInfo) {
     try {
         const provider = reviewedNetworkProvider(txInfo);
@@ -532,14 +472,14 @@ async function estimateGas(txInfo) {
         }
         feeStatus = FEE_KNOWN;
         feeWei = gasCostWei;
-        // A max ETH send is the balance readBalances() read minus this
-        // estimate's reserve, not the Send screen's, and is signed with this
-        // estimate's fee fields: fees fetched again at signing could exceed
-        // the reserve it leaves, and the node would refuse it for want of
-        // funds. Where the balance is unknown or no longer covers the fee, the
-        // amount is left as it is and the balance check below says so.
+        // A max ETH send is the balance minus this estimate's reserve, not the
+        // Send screen's, and is signed with this estimate's fee fields: fees
+        // fetched again at signing could exceed the reserve it leaves, and the
+        // node would refuse it for want of funds. Where the balance no longer
+        // covers the fee, the amount is left as it is and the balance check
+        // below says so.
         if (txInfo.max && txInfo.token === "ETH") {
-            const amount = maxEthAmount(balances?.eth, gasCostWei);
+            const amount = maxEthAmount(txInfo.balance, gasCostWei);
             if (amount !== null) {
                 txInfo.amount = amount;
                 renderAmount(txInfo);
@@ -568,17 +508,16 @@ async function estimateGas(txInfo) {
     }
 }
 
-// Populate the transaction this send describes, enforce the bounds against the
-// gas limit and fees that were actually filled in, then sign and broadcast it.
-// Apart from a max ETH send, which passes its estimate's fee fields as `fees`,
-// the send pins no fee fields, so ethers fills maxFeePerGas and the gas limit
-// from what the configured RPC node answers, with nothing otherwise bounding
-// what a hostile node can set — the dApp path's ceilings never reached this
-// one. Populating before the check is what makes assertWithinCeilings() see
-// the same numbers that would be signed; it throws an ApprovalMismatchError
-// when the gas limit, a fee per gas, or the product gasLimit × maxFeePerGas is
-// over its bound, and the caller then shows the one refusal reserved for all
-// three rather than sending.
+// Populate the transaction this send describes, enforce the fee bound against
+// the fees that were actually filled in, then sign and broadcast it. Apart
+// from a max ETH send, which passes its estimate's fee fields as `fees`, the
+// send pins no fee fields, so ethers fills maxFeePerGas and the gas limit from
+// what the configured RPC node answers, with nothing otherwise bounding what a
+// hostile node can set — the dApp path's ceilings never reached this one.
+// Populating before the check is what makes assertWithinCeilings() see the
+// same numbers that would be signed; it throws an ApprovalMismatchError when
+// the product gasLimit × maxFeePerGas is over the bound, which the caller
+// shows in the reserved error area rather than sending.
 async function populateVerifyAndSend(connectedSigner, tx, fees = null) {
     let request;
     if (tx.token === "ETH") {
@@ -606,6 +545,15 @@ async function populateVerifyAndSend(connectedSigner, tx, fees = null) {
     return connectedSigner.sendTransaction(populated);
 }
 
+// Show a full-sentence send failure in the reserved errors box, the same
+// element and markup renderValidation() uses for messages carrying the user's
+// own numbers, so it never moves anything on the screen.
+function showSendError(message) {
+    const el = $("confirm-errors");
+    el.innerHTML = `<div class="text-xs">${escapeHtml(message)}</div>`;
+    el.style.visibility = "visible";
+}
+
 async function checkRecipientHistory(txInfo) {
     try {
         const provider = reviewedNetworkProvider(txInfo);
@@ -613,9 +561,6 @@ async function checkRecipientHistory(txInfo) {
             fromAddress: txInfo.from,
             chainId: txInfo.chainId,
         });
-        // The user may have left this transaction while the checks were in
-        // flight; its warnings must not reach another recipient's screen.
-        if (pendingTx !== txInfo) return;
         for (const w of asyncWarnings) {
             if (w.type === "contract") {
                 $("confirm-contract-warning").style.visibility = "visible";
@@ -644,11 +589,6 @@ function init(_ctx) {
     onViewLeave("confirm-tx", clearPassword);
 
     $("btn-confirm-send").addEventListener("click", async () => {
-        // A press shows only its own refusal, if any.
-        setVisible("confirm-network-changed-error", false);
-        setVisible("confirm-from-address-error", false);
-        setVisible("confirm-fee-bound-error", false);
-
         const wallet = state.wallets[state.selectedWallet];
         // Every Send button refuses a defective wallet before this screen,
         // but the popup also reopens onto it from a saved view.
@@ -659,11 +599,15 @@ function init(_ctx) {
         }
 
         // The screen describes the network the transaction was reviewed for,
-        // which Settings may have switched away from since: "Back" from
-        // Settings after a switch draws this screen again from the saved
-        // transaction, as a popup reopened onto it does.
+        // which Settings may have switched away from since: with this screen
+        // open, where Back only unhides it, or before the popup reopened onto
+        // it.
         if (currentNetwork().chainId !== pendingTx.chainId) {
-            setVisible("confirm-network-changed-error", true);
+            showSendError(
+                "The active network changed after this transaction was" +
+                    " reviewed, so it was not sent. Please go back and review" +
+                    " it again.",
+            );
             return;
         }
 
@@ -672,7 +616,11 @@ function init(_ctx) {
         // address selected.
         const addr = wallet.addresses.find((a) => a.address === pendingTx.from);
         if (!addr) {
-            setVisible("confirm-from-address-error", true);
+            showError(
+                "confirm-tx-password-error",
+                "The selected wallet does not hold the From address above, " +
+                    "so nothing was sent. Please go back and send again.",
+            );
             return;
         }
 
@@ -704,10 +652,6 @@ function init(_ctx) {
         $("btn-confirm-send").disabled = true;
         $("btn-confirm-send").classList.add("text-muted");
 
-        // The wait, success and error screens show the amount as this screen
-        // does, so they are handed a copy carrying that text. pendingTx keeps
-        // the exact amount, which is the one signed.
-        const shownTx = { ...pendingTx, amount: shownAmount(pendingTx) };
         let tx;
         try {
             const signer = getSignerForAddress(wallet, addr, decryptedSecret);
@@ -724,23 +668,19 @@ function init(_ctx) {
             // Note: JS strings are immutable; this nulls the reference but
             // the original string may persist in memory until GC.
             decryptedSecret = null;
-            txStatus.showWait(shownTx, tx.hash);
+            txStatus.showWait(pendingTx, tx.hash);
         } catch (e) {
             decryptedSecret = null;
-            // A gas limit or fee over its bound is refused before anything is
-            // broadcast, so there is no transaction that may have reached the
-            // network to warn about: the refusal stays on the confirmation
-            // screen where the user can go back, rather than routing to the
-            // sent/failed screen. Its sentence is fixed in index.html, so that
-            // its box can hold its space from the first paint; the reason in
-            // full, naming the bound, is logged.
+            // A fee over the bound is refused before anything is broadcast, so
+            // there is no transaction that may have reached the network to warn
+            // about: the message stays on the confirmation screen where the
+            // user can go back, rather than routing to the sent/failed screen.
             if (e && e.approvalMismatch) {
-                log.errorf("send refused:", e.message);
-                setVisible("confirm-fee-bound-error", true);
+                showSendError(e.message);
                 return;
             }
             const hash = tx ? tx.hash : null;
-            txStatus.showError(shownTx, hash, e.shortMessage || e.message);
+            txStatus.showError(pendingTx, hash, e.shortMessage || e.message);
         } finally {
             $("btn-confirm-send").disabled = false;
             $("btn-confirm-send").classList.remove("text-muted");

src/popup/views/helpers.js

@@ -19,7 +19,6 @@ const {
     isBelowOneMillionth,
 } = require("../../shared/amountDisplay");
 const { resolveTokenSymbol } = require("../../shared/approvalAmount");
-const { getProvider } = require("../../shared/balances");
 const { DEBUG } = require("../../shared/constants");
 const { escapeHtml } = require("../../shared/html");
 const { isDebug } = require("../../shared/log");
@@ -129,8 +128,7 @@ function showView(name) {
 }
 
 // Create or update the debug/insecure warning banner.
-// Called on every view switch, after the settings debug toggle changes, and
-// after a network switch in Settings.
+// Called on every view switch and after the settings debug toggle changes.
 // The banner is shown when the compile-time DEBUG constant is true OR when
 // the user has enabled runtime debug mode via the settings easter egg, OR
 // when the active network is a testnet.
@@ -608,20 +606,6 @@ const EXT_ICON =
     `<path d="M7 1.5h3.5V5M7 5.5L10.5 1.5"/>` +
     `</svg></span>`;
 
-// The node of the network a transaction was reviewed for, the one its chain id
-// names, which need not be the active one: the popup can reopen onto ConfirmTx
-// or WaitTx after Settings switched the network. Its RPC URL is the one
-// Settings has for that network: the active network's is state.rpcUrl, any
-// other's the one remembered for it (see applyChainSwitchFields()).
-function reviewedNetworkProvider(txInfo) {
-    const net = networkByChainId(txInfo.chainId);
-    if (net.id === state.networkId) {
-        return getProvider(state.rpcUrl, net.id);
-    }
-    const remembered = state.networkEndpoints[net.id] || {};
-    return getProvider(remembered.rpcUrl || net.defaultRpcUrl, net.id);
-}
-
 // Block-explorer URLs. The origin is a per-network constant from
 // src/shared/networks.js, the explorer of the network with `chainId`, or of
 // the active network when no chain id is given; only the path segment is
@@ -777,7 +761,6 @@ module.exports = {
     attachCopyHandlers,
     etherscanLinkHtml,
     explorerUrl,
-    reviewedNetworkProvider,
     EXT_ICON,
     truncateMiddle,
     isoDate,

src/popup/views/send.js

@@ -164,9 +164,8 @@ function renderSendTokenSelect(addr) {
     }
 }
 
-// The token balance the Send screen states, and the scale it hands the
-// confirmation screen, which reads the balance itself from the network it is
-// drawn for.
+// The token balance and scale the Send screen states and hands the
+// confirmation screen, so the two screens describe the holding the same way.
 //
 // The scale is resolved the same way balances.js resolved the scale it
 // DISPLAYED this token's balance at: bundled list, then the user's tracked
@@ -189,11 +188,13 @@ function renderSendTokenSelect(addr) {
 //
 // The two resolutions can therefore differ, and where they do, the stored
 // `balance` is a quantity computed at a scale this screen has just declined to
-// stand behind, so it is withdrawn: unknown scale means unknown balance. It is
-// null rather than "0": this screen states it as unknown, as the confirmation
-// screen does, and Max fills nothing in for it. Only a stored quantity is
-// withdrawn: the "0" for a token that has no row at all is an absence of
-// holdings, which is true at every scale.
+// stand behind. Stating it would leave validateTransfer() checking the amount
+// against a number the wallet does not vouch for, so it is withdrawn: unknown
+// scale means unknown balance. It is null rather than "0": both screens state
+// an unknown balance as unknown, and validateTransfer() treats it as no balance
+// to spend from, which is the fail-closed side of an amount nobody can check.
+// Only a stored quantity is withdrawn: the "0" for a token that has no row at
+// all is an absence of holdings, which is true at every scale.
 function tokenBalanceAndDecimals(addr, token) {
     const tb = (addr.tokenBalances || []).find(
         (t) => t.address.toLowerCase() === token.toLowerCase(),
@@ -377,6 +378,7 @@ function init(_ctx) {
         const addr = currentAddress();
 
         let tokenSymbol = null;
+        let tokenBalance = null;
         let tokenDecimals = null;
         if (token !== "ETH") {
             tokenSymbol = resolveSymbol(
@@ -384,7 +386,10 @@ function init(_ctx) {
                 addr.tokenBalances,
                 state.trackedTokens,
             );
-            ({ tokenDecimals } = tokenBalanceAndDecimals(addr, token));
+            ({ tokenBalance, tokenDecimals } = tokenBalanceAndDecimals(
+                addr,
+                token,
+            ));
         }
 
         // The confirmation screen's own amount check, so it is never shown
@@ -419,7 +424,9 @@ function init(_ctx) {
             ensName: ensName,
             amount: amount,
             token: token,
+            balance: addr.balance,
             tokenSymbol: tokenSymbol,
+            tokenBalance: tokenBalance,
             tokenDecimals: tokenDecimals,
             max: amountIsMax,
         });

src/popup/views/settings.js

@@ -16,8 +16,6 @@ const {
 } = require("../dustThreshold");
 const { state, saveState, currentNetwork } = require("../../shared/state");
 const { onChainSwitch } = require("../../shared/chainSwitch");
-const { restorableStack } = require("../../shared/persistedState");
-const { resetRenderedViews, markViewRendered } = require("../viewRouter");
 const {
     log,
     debugFetch,
@@ -321,35 +319,12 @@ function init(ctx) {
     networkSelect.addEventListener("change", async () => {
         const newId = networkSelect.value;
         if (newId === state.networkId) return;
-        // The screens beneath Settings show the previous network, so Back
-        // finds them as it does in a reopened popup: each is rendered again
-        // when Back lands on it, and the stack is cut at the first one that
-        // cannot be rendered from saved state, such as Send or AddToken. It
-        // is cut at AddressToken too, unless that shows the native token: any
-        // other token there was picked on the previous network. Without a
-        // wallet the stack starts at Welcome, which that cut would drop, and
-        // Welcome shows nothing from a network. The cut comes before the
-        // switch so that the switch's save keeps it for a popup closed
-        // straight after.
-        if (state.hasWallet) {
-            const tokenView = state.viewStack.indexOf("address-token");
-            if (tokenView !== -1 && state.selectedToken !== "ETH") {
-                state.viewStack = state.viewStack.slice(0, tokenView);
-            }
-            state.viewStack = restorableStack(state.viewStack, "settings");
-        }
         const net = await onChainSwitch(newId);
         // Open pages are told by the background, as after a site's approved
         // switch request.
         notify({ type: "AUTISTMASK_NETWORK_CHANGED", chainId: net.chainId });
-        resetRenderedViews();
-        // Settings itself, and the testnet banner above it, are brought up
-        // to date for the new network here.
-        markViewRendered("settings");
         $("settings-rpc").value = state.rpcUrl;
         $("settings-blockscout").value = state.blockscoutUrl;
-        renderTrackedTokens();
-        updateDebugBanner(state.currentView);
         showFlash("Switched to " + net.name + ".");
     });
 

src/popup/views/settingsAddToken.js

@@ -1,6 +1,6 @@
 const { $, showView, showFlash, escapeHtml, goBack } = require("./helpers");
 const { getTopTokens } = require("../../shared/tokenList");
-const { state, saveState, currentNetwork } = require("../../shared/state");
+const { state, saveState } = require("../../shared/state");
 const { lookupTokenInfo } = require("../../shared/balances");
 const { isScamAddress } = require("../../shared/scamlist");
 const { log } = require("../../shared/log");
@@ -75,12 +75,6 @@ function show() {
     $("settings-addtoken-address").value = "";
     $("settings-addtoken-info").textContent = "";
     $("settings-addtoken-info").style.visibility = "hidden";
-    // The bundled list holds Ethereum Mainnet contracts, which name no token
-    // on any other network.
-    $("settings-addtoken-common").classList.toggle(
-        "hidden",
-        state.networkId !== "mainnet",
-    );
     renderTop10();
     renderDropdown();
     showView("settings-addtoken");
@@ -136,9 +130,6 @@ function init(_ctx) {
         infoEl.textContent = "Looking up token...";
         infoEl.style.visibility = "visible";
         log.debugf("Looking up token contract", addr);
-        // The network the lookup asks, which Settings may switch away from
-        // before it answers, as for a transaction in confirmTx.js.
-        const chainId = currentNetwork().chainId;
         try {
             const info = await lookupTokenInfo(
                 addr,
@@ -146,15 +137,6 @@ function init(_ctx) {
                 state.networkId,
                 ctx.pageClosed,
             );
-            // A contract address names a token on one network only, so an
-            // answer after a switch is not added to the new network's list.
-            if (currentNetwork().chainId !== chainId) {
-                showFlash(
-                    "The active network changed before the lookup finished," +
-                        " so the token was not added.",
-                );
-                return;
-            }
             log.infof("Adding token", info.symbol, addr);
             state.trackedTokens.push({
                 address: addr,

src/popup/views/transactionDetail.js

@@ -48,16 +48,16 @@ function getTransactionType(tx) {
     return "Native " + nativeCurrencyByChainId(tx.chainId) + " Transfer";
 }
 
-function txAddressHtml(address, ensName, title, chainId) {
+function txAddressHtml(address, ensName, title) {
     const blockie = blockieHtml(address);
     return (
         `<div class="mb-1">${blockie}</div>` +
-        renderAddressHtml(address, { title, ensName, chainId })
+        renderAddressHtml(address, { title, ensName })
     );
 }
 
-function txHashHtml(hash, chainId) {
-    const link = explorerUrl("tx", hash, chainId);
+function txHashHtml(hash) {
+    const link = explorerUrl("tx", hash);
     const extLink = etherscanLinkHtml(link);
     return copyableHtml(hash, "break-all") + extLink;
 }
@@ -83,10 +83,10 @@ function show(tx) {
             method: tx.method || null,
             contractAddress: tx.contractAddress || null,
             // The network the history entry was read from. The type line and
-            // the fee are in its native currency, not the active network's,
-            // and the links open its explorer: the active network can change,
-            // in Settings or when the user approves a site's request, before
-            // a later popup shows this screen again.
+            // the fee are in its native currency, not the active network's:
+            // the active network can change, in Settings or when the user
+            // approves a site's request, before a later popup shows this
+            // screen again.
             chainId: tx.chainId,
         },
     };
@@ -96,24 +96,18 @@ function show(tx) {
 function render() {
     const tx = state.viewData.tx;
     if (!tx) return;
-    $("tx-detail-hash").innerHTML = txHashHtml(tx.hash, tx.chainId);
+    $("tx-detail-hash").innerHTML = txHashHtml(tx.hash);
 
     const fromTitle = addressTitle(tx.from, state.wallets);
     $("tx-detail-from").innerHTML = txAddressHtml(
         tx.from,
         tx.fromEns,
         fromTitle,
-        tx.chainId,
     );
     // A contract creation has no recipient: transactions.js gives it `to: ""`.
     if (tx.to) {
         const toTitle = addressTitle(tx.to, state.wallets);
-        $("tx-detail-to").innerHTML = txAddressHtml(
-            tx.to,
-            tx.toEns,
-            toTitle,
-            tx.chainId,
-        );
+        $("tx-detail-to").innerHTML = txAddressHtml(tx.to, tx.toEns, toTitle);
     } else {
         $("tx-detail-to").innerHTML = escapeHtml(CONTRACT_CREATION_TEXT);
     }
@@ -152,7 +146,7 @@ function render() {
     if (tokenContractSection && tokenContractEl) {
         if (tx.contractAddress) {
             const dot = addressDotHtml(tx.contractAddress);
-            const link = explorerUrl("token", tx.contractAddress, tx.chainId);
+            const link = explorerUrl("token", tx.contractAddress);
             // Hand-rolled rather than renderAddressHtml() because the
             // link goes to the explorer's /token/ page, not /address/.
             // Same two-row shape though: dot and link on the strip, the
@@ -210,11 +204,7 @@ function showDetailField(sectionId, contentId, value) {
 function populateOnChainDetails(txData, chainId) {
     // Block number
     if (txData.block_number != null) {
-        const blockLink = explorerUrl(
-            "block",
-            String(txData.block_number),
-            chainId,
-        );
+        const blockLink = explorerUrl("block", String(txData.block_number));
         const blockSection = $("tx-detail-block-section");
         const blockEl = $("tx-detail-block");
         if (blockSection && blockEl) {
@@ -350,9 +340,9 @@ async function loadFullTxDetails(txHash, chainId) {
                     if (tokenSymbol) {
                         detailsHtml += `<div class="font-bold">${escapeHtml(displaySymbol(tokenSymbol))}</div>`;
                     }
-                    detailsHtml += renderAddressHtml(d.address, { chainId });
+                    detailsHtml += renderAddressHtml(d.address);
                 } else if (d.address) {
-                    detailsHtml += renderAddressHtml(d.address, { chainId });
+                    detailsHtml += renderAddressHtml(d.address);
                 } else {
                     detailsHtml += `<div class="font-bold">${escapeHtml(d.value)}</div>`;
                 }

src/popup/views/txStatus.js

@@ -14,13 +14,10 @@ const {
     displaySymbol,
     clearViewStack,
     tokenLabel,
-    reviewedNetworkProvider,
 } = require("./helpers");
 const { state } = require("../../shared/state");
-const {
-    SUPPORTED_CHAIN_IDS,
-    nativeCurrencyByChainId,
-} = require("../../shared/networks");
+const { nativeCurrencyByChainId } = require("../../shared/networks");
+const { getProvider } = require("../../shared/balances");
 const { log } = require("../../shared/log");
 
 // Receipt poll cadence and the deadline after which the wait is reported as
@@ -64,16 +61,15 @@ function endWait() {
 }
 
 // A contract creation reaches these screens with `to` as "" (approval.js
-// writes `to: toAddr || ""`). The link opens the explorer of the network with
-// `chainId`, or of the active network when none is given.
-function toAddressHtml(address, chainId) {
+// writes `to: toAddr || ""`).
+function toAddressHtml(address) {
     if (!address) return escapeHtml(CONTRACT_CREATION_TEXT);
     const title = addressTitle(address, state.wallets);
-    return renderAddressHtml(address, { title, chainId });
+    return renderAddressHtml(address, { title });
 }
 
-function txHashHtml(hash, chainId) {
-    const link = explorerUrl("tx", hash, chainId);
+function txHashHtml(hash) {
+    const link = explorerUrl("tx", hash);
     return copyableHtml(hash, "break-all") + etherscanLinkHtml(link);
 }
 
@@ -95,11 +91,9 @@ function startWait(txInfo, txHash, broadcastTime, pollNow) {
     // native currency of txInfo.chainId, the network the transaction was sent
     // on, not the active network's: the active network can change, in
     // Settings or when the user approves a site's request, while this screen
-    // is open or before a later popup resumes it. This screen's links open
-    // that network's explorer, and its receipt is asked of that network's
-    // node, for the same reason. A null token is a swap whose amount was not
-    // decoded (see showTxApproval() in approval.js): the amount says so, and
-    // no symbol follows it.
+    // is open or before a later popup resumes it. A null token is a swap whose
+    // amount was not decoded (see showTxApproval() in approval.js): the amount
+    // says so, and no symbol follows it.
     let symbol = "";
     if (txInfo.token === "ETH") {
         symbol = nativeCurrencyByChainId(txInfo.chainId);
@@ -108,8 +102,8 @@ function startWait(txInfo, txHash, broadcastTime, pollNow) {
     }
     $("wait-tx-summary").textContent =
         txInfo.amount + (symbol ? " " + symbol : "");
-    $("wait-tx-to").innerHTML = toAddressHtml(txInfo.to, txInfo.chainId);
-    $("wait-tx-hash").innerHTML = txHashHtml(txHash, txInfo.chainId);
+    $("wait-tx-to").innerHTML = toAddressHtml(txInfo.to);
+    $("wait-tx-hash").innerHTML = txHashHtml(txHash);
     attachCopyHandlers("view-wait-tx");
 
     // Persisted so closing and reopening the popup resumes this wait
@@ -134,7 +128,7 @@ function startWait(txInfo, txHash, broadcastTime, pollNow) {
         renderElapsed();
     }, 1000);
 
-    const provider = reviewedNetworkProvider(txInfo);
+    const provider = getProvider(state.rpcUrl, state.networkId);
     let consecutiveFailures = 0;
 
     async function poll() {
@@ -213,11 +207,10 @@ function showWait(txInfo, txHash) {
 // an object merely missing one of them throws a TypeError out of
 // restoreView() — which init() does not guard, skipping the rest of popup
 // init and leaving wait-tx on screen with no back control. A non-numeric
-// broadcastTime leaves an unexitable wait counting "NaNs". txInfo.chainId picks
-// the node the receipt is asked of and the explorer the links open, so it has
-// to name a network. txInfo.token and txInfo.tokenSymbol are deliberately
-// unchecked: they are compared and coalesced rather than dereferenced, and
-// tokenSymbol is null for ETH.
+// broadcastTime leaves an unexitable wait counting "NaNs". txInfo.token,
+// txInfo.tokenSymbol and txInfo.chainId are deliberately unchecked: they are
+// compared and coalesced rather than dereferenced, and tokenSymbol is null for
+// ETH.
 function restoreWait() {
     const d = state.viewData;
     if (!d || !d.pendingWait) return false;
@@ -233,7 +226,6 @@ function restoreWait() {
     // path itself created.
     if (typeof info.to !== "string") return false;
     if (typeof info.amount !== "string") return false;
-    if (!SUPPORTED_CHAIN_IDS.has(info.chainId)) return false;
     if (typeof w.broadcastTime !== "number" || !isFinite(w.broadcastTime)) {
         return false;
     }

src/shared/chainSwitchFields.js

@@ -38,16 +38,6 @@ function applyChainSwitchFields(s, newNetworkId) {
         blockscoutUrl: s.blockscoutUrl,
     };
     const remembered = s.networkEndpoints[net.id] || {};
-
-    // Tracked tokens are kept per network the same way, because a contract
-    // address names a token on one network only. s.trackedTokens stays the
-    // active network's list, so nothing that reads it changes: the outgoing
-    // list is put away under its network, and the incoming network's list, or
-    // an empty one, takes its place.
-    if (!s.networkTrackedTokens) s.networkTrackedTokens = {};
-    s.networkTrackedTokens[s.networkId] = s.trackedTokens;
-    s.trackedTokens = s.networkTrackedTokens[net.id] || [];
-
     s.networkId = net.id;
     s.rpcUrl = remembered.rpcUrl || net.defaultRpcUrl;
     s.blockscoutUrl = remembered.blockscoutUrl || net.defaultBlockscoutUrl;

src/shared/persistedState.js

@@ -23,11 +23,6 @@ const DEFAULT_STATE = {
     hasWallet: false,
     wallets: [],
     trackedTokens: [],
-    // Tracked tokens remembered per network: { [networkId]: [token, ...] }.
-    // trackedTokens above is the active network's list; this is what the
-    // others are restored from when the active network changes. See
-    // applyChainSwitchFields().
-    networkTrackedTokens: {},
     networkId: "mainnet",
     rpcUrl: DEFAULT_RPC_URL,
     blockscoutUrl: DEFAULT_BLOCKSCOUT_URL,
@@ -294,20 +289,6 @@ function normalizePersisted(saved) {
     // profile whose wallets are perfectly fine. An empty list is a legitimate
     // value and survives.
     out.trackedTokens = structuredClone(tokenRefs(saved.trackedTokens));
-    // Each remembered list is floored like trackedTokens, because
-    // applyChainSwitchFields() puts it straight back onto trackedTokens when
-    // its network becomes the active one. A key that is not a network in
-    // networks.js is dropped, which also keeps an own "__proto__" key from
-    // reaching the plain assignment below.
-    out.networkTrackedTokens = {};
-    if (isRecord(saved.networkTrackedTokens)) {
-        for (const netId of Object.keys(saved.networkTrackedTokens)) {
-            if (!isKnownNetworkId(netId)) continue;
-            out.networkTrackedTokens[netId] = structuredClone(
-                tokenRefs(saved.networkTrackedTokens[netId]),
-            );
-        }
-    }
     // The loud refusal for an unknown id is assertStateUsable(); this is the
     // floor under it. networkId is an object KEY into networkEndpoints below,
     // so a value that is not a network in networks.js must never get that far

src/shared/state.js

@@ -42,11 +42,9 @@ const { log } = require("./log");
 // and writes THIS object, never the proxy: the guard is for callers.
 const rawState = {
     ...DEFAULT_STATE,
-    // Their own objects, not the ones DEFAULT_STATE holds:
-    // applyChainSwitchFields() mutates these maps in place, and a spread copies
-    // the reference.
+    // Its own object, not the one DEFAULT_STATE holds: applyChainSwitchFields()
+    // mutates this map in place, and a spread copies the reference.
     networkEndpoints: {},
-    networkTrackedTokens: {},
     currentView: null,
     selectedWallet: null,
     selectedAddress: null,
@@ -440,14 +438,12 @@ function mergeNetworkEndpoints(base, ours, theirs) {
 //
 // Every other persisted field stays a whole-field diff:
 // `trackedTokens`/`fraudContracts`/`viewStack` are arrays of scalars with no
-// per-element identity to merge by; `networkTrackedTokens` is diffed whole like
-// `trackedTokens` and `networkId`, the two fields a network switch moves
-// together with it; `tokenHolderCache` is a map shaped like the ones above,
-// but nothing in src/ ever writes an entry into it — it is only ever reset
-// wholesale to `{}` (applyChainSwitchFields()) — so there is no in-place
-// mutation for a whole-field diff to collide with; `viewData` is this page's
-// own UI scratch space, not data another page has any reason to share
-// membership of.
+// per-element identity to merge by; `tokenHolderCache` is a map shaped like
+// the ones above, but nothing in src/ ever writes an entry into it — it is
+// only ever reset wholesale to `{}` (applyChainSwitchFields()) — so there is
+// no in-place mutation for a whole-field diff to collide with; `viewData` is
+// this page's own UI scratch space, not data another page has any reason to
+// share membership of.
 //
 // This does not make two pages that both change the SAME leaf concurrently
 // safe: last write wins on that one leaf, same as before. What it removes

src/shared/transferAmount.js

@@ -2,11 +2,11 @@
 // encoded with.
 //
 // A token amount is a decimal string plus a scale, and the two come from
-// different places. The confirmation screen renders the amount, the symbol and
-// the balance it reads from the node with the block explorer's cached metadata
-// (see fetchTokenBalances() in balances.js); the transfer used to be encoded
-// from decimals() read off the contract at signing time, and nothing compared
-// the two. A token whose on-chain scale differs from the cached one — an
+// different places. The confirmation screen renders the amount, the balance and
+// the symbol from the block explorer's cached metadata (see
+// fetchTokenBalances() in balances.js); the transfer used to be encoded from
+// decimals() read off the contract at signing time, and nothing compared the
+// two. A token whose on-chain scale differs from the cached one — an
 // upgradeable or proxy token, a caller-dependent one, a stale or wrong explorer
 // entry — therefore signed an amount that was never displayed, off by a power
 // of ten for every decimal place of disagreement.

src/shared/txValidation.js

@@ -111,8 +111,8 @@ function isValidAmount(amount, tokenDecimals = null) {
 
 // The most ETH a send can carry: the exact balance minus the fee reserve from
 // feeReserveWei(), as a decimal string, so validateTransfer() passes it with
-// exactly that reserve left behind. `ethBalance` is an exact decimal string as
-// formatEther() writes it, never a rounded one. Null when the balance does not
+// exactly that reserve left behind. `ethBalance` is the exact decimal string
+// balances.js stores, never a rounded one. Null when the balance does not
 // leave anything to send once the fee is paid, or when either input is
 // unusable.
 function maxEthAmount(ethBalance, feeWei) {

tests/addressKey.test.js

@@ -291,6 +291,7 @@ async function confirmSend(from, selected) {
         to: RECIPIENT,
         amount: "0.5",
         token: "ETH",
+        balance: "1.0",
     });
     await settle();
     node("confirm-tx-password").value = PASSWORD;
@@ -442,25 +443,11 @@ describe("a confirmation screen whose From is not the selected address", () => {
         expect(Transaction.from(signed).from).toBe(derived(1).address);
     });
 
-    // The refusal's sentence is fixed in index.html, in a box of its own that
-    // holds its space from the first paint, so showing it moves nothing.
     test("nothing is sent when the selected wallet does not hold it", async () => {
         expect(await confirmSend(derived(5).address, 0)).toBeUndefined();
-        expect(node("confirm-from-address-error").style.visibility).toBe(
-            "visible",
-        );
-        expect(node("confirm-tx-password-error").textContent).toBe("");
-
-        // Reviewing a send again draws the screen again, which hides it.
-        confirmTx.show({
-            from: derived(0).address,
-            to: RECIPIENT,
-            amount: "0.5",
-            token: "ETH",
-        });
-        await settle();
-        expect(node("confirm-from-address-error").style.visibility).toBe(
-            "hidden",
+        expect(node("confirm-tx-password-error").textContent).toBe(
+            "The selected wallet does not hold the From address above, " +
+                "so nothing was sent. Please go back and send again.",
         );
     });
 });

tests/coldWorkerChainSwitch.test.js

@@ -204,21 +204,17 @@ describe("a chain switch on a worker that never loaded state", () => {
         expect(after.rpcUrl).toBe(SEPOLIA.defaultRpcUrl);
 
         // And it took nothing else with it. Without the load these come back
-        // as [], {}, {} and "system" from DEFAULT_STATE — every wallet in the
+        // as [], {}, [] and "system" from DEFAULT_STATE — every wallet in the
         // extension gone, encrypted secrets included.
         expect(after.wallets).toEqual(walletFixture());
         expect(after.hasWallet).toBe(true);
         expect(after.activeAddress).toBe(ADDRESS);
         expect(after.allowedSites).toEqual({ [ADDRESS]: [CONNECTED_ORIGIN] });
-        expect(after.networkTrackedTokens).toEqual({
-            mainnet: [{ address: TOKEN, symbol: "DAI", decimals: 18 }],
-        });
+        expect(after.trackedTokens).toEqual([
+            { address: TOKEN, symbol: "DAI", decimals: 18 },
+        ]);
         expect(after.theme).toBe("dark");
 
-        // The mainnet token is tracked on mainnet only: Sepolia starts with
-        // none of its own.
-        expect(after.trackedTokens).toEqual([]);
-
         // The user's mainnet endpoint is remembered rather than replaced by
         // the public default, so switching back returns it.
         expect(after.networkEndpoints.mainnet).toEqual({
@@ -230,9 +226,6 @@ describe("a chain switch on a worker that never loaded state", () => {
         expect(bg.persisted().rpcUrl).toBe(CUSTOM_RPC);
         expect(bg.persisted().blockscoutUrl).toBe(CUSTOM_BLOCKSCOUT);
         expect(bg.persisted().wallets).toEqual(walletFixture());
-        expect(bg.persisted().trackedTokens).toEqual([
-            { address: TOKEN, symbol: "DAI", decimals: 18 },
-        ]);
     });
 
     test("compares the requested chain against the stored one, not the default", async () => {

tests/confirmTxAmount.test.js

@@ -1,415 +0,0 @@
-// The amount of the wallet's own send on the confirmation, wait, success and
-// error screens (https://git.eeqj.de/sneak/AutistMask/issues/522).
-//
-// These screens printed the text from Send's amount field as it was typed or
-// filled in: `0.5 ETH`, or `1.234147890123456789 ETH` after Max, where the
-// approval screen shows a site's send as `0.5000 ETH`. They now show it to four
-// decimal places with the nonzero floor, as the approval screen does, and the
-// transaction is still signed for the exact amount.
-//
-// Driven through the real Send screen, confirmation screen, Sign & Send and
-// wait screen, with only the node, the explorer and the DOM stubbed.
-
-"use strict";
-
-// What the stub node answers, and the signed transactions it was handed. The
-// token's own decimals() answers 6, as the explorer does.
-const mockNode = {
-    balanceWei: 0n,
-    tokenUnits: 0n,
-    tokenDecimals: 6n,
-    broadcast: [],
-    broadcastError: null,
-    receipt: null,
-};
-
-// The token rows the stub explorer reports for the address.
-const mockExplorer = { items: [] };
-
-jest.mock("ethers", () => {
-    const actual = jest.requireActual("ethers");
-    // The selector of decimals(); every other contract call is balanceOf().
-    const DECIMALS = "0x313ce567";
-    class StubProvider {
-        async getBalance() {
-            return mockNode.balanceWei;
-        }
-        async call(tx) {
-            return actual.AbiCoder.defaultAbiCoder().encode(
-                ["uint256"],
-                [
-                    tx.data.startsWith(DECIMALS)
-                        ? mockNode.tokenDecimals
-                        : mockNode.tokenUnits,
-                ],
-            );
-        }
-        async lookupAddress() {
-            return null;
-        }
-        // 20 gwei reserved per gas.
-        async getFeeData() {
-            return {
-                maxFeePerGas: 20000000000n,
-                maxPriorityFeePerGas: 1000000000n,
-                gasPrice: 10000000000n,
-            };
-        }
-        async estimateGas() {
-            return 21000n;
-        }
-        async getCode() {
-            return "0x";
-        }
-        async getTransactionCount() {
-            return 1;
-        }
-        async getNetwork() {
-            return { chainId: 1n };
-        }
-        async broadcastTransaction(signed) {
-            if (mockNode.broadcastError) throw mockNode.broadcastError;
-            mockNode.broadcast.push(signed);
-            return { hash: "0x" + "ab".repeat(32) };
-        }
-        async getTransactionReceipt() {
-            return mockNode.receipt;
-        }
-    }
-    return {
-        ...actual,
-        JsonRpcProvider: StubProvider,
-        Network: { from: () => ({}) },
-    };
-});
-
-jest.mock("../src/shared/log", () => ({
-    log: {
-        debugf: () => {},
-        infof: () => {},
-        warnf: () => {},
-        errorf: () => {},
-    },
-    // The explorer's token list, which refreshBalances() also fetches.
-    debugFetch: jest.fn(async () => ({
-        ok: true,
-        status: 200,
-        json: async () => mockExplorer.items,
-    })),
-    urlOrigin: () => "",
-    setRuntimeDebug: () => {},
-    isDebug: () => false,
-}));
-
-// The confirmation screen's Etherscan label lookup is the only fetch() these
-// screens make; it fails, as it does offline.
-global.fetch = jest.fn(() => {
-    throw new Error("tests must not perform network requests");
-});
-
-const { makeStorageStub } = require("./support/storageStub");
-global.chrome = { storage: makeStorageStub(), runtime: { sendMessage() {} } };
-
-// A stub DOM: every id resolves to a recording element.
-const elements = new Map();
-
-function makeEl(id) {
-    const handlers = new Map();
-    return {
-        id,
-        textContent: "",
-        innerHTML: "",
-        value: "",
-        disabled: false,
-        style: {},
-        dataset: {},
-        classList: {
-            add() {},
-            remove() {},
-            toggle() {},
-            contains: () => false,
-        },
-        handlers,
-        children: [],
-        addEventListener(name, fn) {
-            handlers.set(name, fn);
-        },
-        appendChild(child) {
-            this.children.push(child);
-            return child;
-        },
-        querySelectorAll: () => [],
-        querySelector: () => null,
-        remove() {},
-        focus() {},
-        // The success screen hides whole sections through .parentElement.
-        get parentElement() {
-            return global.document.getElementById(id + "-parent");
-        },
-    };
-}
-
-global.document = {
-    getElementById(id) {
-        if (!elements.has(id)) elements.set(id, makeEl(id));
-        return elements.get(id);
-    },
-    createElement: (tag) => makeEl(tag),
-    body: { prepend() {}, appendChild() {} },
-    addEventListener() {},
-};
-global.navigator = { clipboard: { writeText() {} } };
-
-const {
-    Interface,
-    Transaction,
-    Wallet,
-    getAddress,
-    parseEther,
-} = require("ethers");
-const { refreshBalances } = require("../src/shared/balances");
-const { encryptWithPassword } = require("../src/shared/vault");
-const { state } = require("../src/shared/state");
-const { clearPrices } = require("../src/shared/prices");
-const send = require("../src/popup/views/send");
-const confirmTx = require("../src/popup/views/confirmTx");
-const txStatus = require("../src/popup/views/txStatus");
-
-const PRIVATE_KEY = "0x" + "11".repeat(32);
-const HOLDER = new Wallet(PRIVATE_KEY).address;
-const RECIPIENT = "0xC0FfEE0000000000000000000000000000c0fFEe";
-const PASSWORD = "correct horse battery staple";
-
-const GWEI = 1000000000n;
-// 1.234567890123456789 ETH.
-const BALANCE_WEI = 1234567890123456789n;
-
-// A token the bundled list does not know, with enough holders to be listed,
-// at 6 decimal places.
-const TOKEN = "0x" + "d".repeat(40);
-
-const transferIface = new Interface([
-    "function transfer(address to, uint256 amount)",
-]);
-
-let encryptedSecret;
-
-// The confirmation screen Review leads to, once shown.
-let confirmed = null;
-
-function el(id) {
-    return global.document.getElementById(id);
-}
-
-function text(id) {
-    return el(id).textContent;
-}
-
-// show() reads the balance and then estimates the fee without awaiting
-// either; this lets both settle.
-async function settle() {
-    for (let i = 0; i < 10; i++) await new Promise((r) => setTimeout(r, 0));
-}
-
-// The address holds BALANCE_WEI and, when `tokenUnits` is given, that many
-// base units of TOKEN, fetched and stored where the popup stores them. Send
-// is then open for `token` ("ETH" or TOKEN) with the recipient entered.
-async function openSend(token, tokenUnits = null) {
-    mockNode.balanceWei = BALANCE_WEI;
-    mockNode.tokenUnits = tokenUnits ?? 0n;
-    mockExplorer.items =
-        tokenUnits === null
-            ? []
-            : [
-                  {
-                      value: String(tokenUnits),
-                      token: {
-                          type: "ERC-20",
-                          address_hash: TOKEN,
-                          symbol: "TOK",
-                          name: "Token",
-                          decimals: "6",
-                          holders_count: "50000",
-                      },
-                  },
-              ];
-    state.wallets = [
-        {
-            type: "key",
-            name: "Wallet 1",
-            encryptedSecret,
-            addresses: [{ address: HOLDER }],
-        },
-    ];
-    state.selectedWallet = 0;
-    state.selectedAddress = 0;
-    await refreshBalances(
-        state.wallets,
-        "https://rpc.example.invalid",
-        "https://blockscout.example/api/v2",
-        state.trackedTokens,
-        "mainnet",
-    );
-    send.init({
-        showConfirmTx: (info) => (confirmed = info),
-        pageClosed: new AbortController().signal,
-    });
-    confirmTx.init({});
-    send.resetSendValidation();
-    state.currentView = "send";
-    state.selectedToken = token;
-    el("send-to").value = RECIPIENT;
-    el("send-amount").value = "";
-}
-
-// Press Review and show the confirmation screen with its fee estimate settled.
-async function review() {
-    await el("btn-send-review").handlers.get("click")();
-    confirmTx.show(confirmed);
-    await settle();
-}
-
-async function signAndSend() {
-    el("confirm-tx-password").value = PASSWORD;
-    await el("btn-confirm-send").handlers.get("click")();
-}
-
-// The one transaction the stub node was handed.
-function broadcastTx() {
-    expect(mockNode.broadcast).toHaveLength(1);
-    return Transaction.from(mockNode.broadcast[0]);
-}
-
-beforeAll(async () => {
-    encryptedSecret = await encryptWithPassword(PRIVATE_KEY, PASSWORD);
-});
-
-beforeEach(() => {
-    elements.clear();
-    clearPrices();
-    confirmed = null;
-    state.selectedToken = null;
-    state.trackedTokens = [];
-    state.fraudContracts = [];
-    state.currentView = null;
-    mockNode.broadcast = [];
-    mockNode.broadcastError = null;
-    mockNode.receipt = null;
-    txStatus.init({
-        doRefreshAndRender() {},
-        pageClosed: new AbortController().signal,
-    });
-});
-
-afterEach(() => {
-    txStatus.endWait();
-});
-
-describe("the wallet's own send shows its amount to four decimal places", () => {
-    test("for a short amount", async () => {
-        await openSend("ETH");
-        el("send-amount").value = "0.5";
-        await review();
-        expect(text("confirm-amount")).toBe("0.5000 ETH");
-
-        await signAndSend();
-        expect(text("wait-tx-summary")).toBe("0.5000 ETH");
-        expect(broadcastTx().value).toBe(parseEther("0.5"));
-    });
-
-    // Send accepts both. The approval screen writes the same value `0.5000`.
-    test.each([".5", "00.5"])("for an amount typed as %s", async (typed) => {
-        await openSend("ETH");
-        el("send-amount").value = typed;
-        await review();
-        expect(text("confirm-amount")).toBe("0.5000 ETH");
-
-        await signAndSend();
-        expect(text("wait-tx-summary")).toBe("0.5000 ETH");
-        expect(broadcastTx().value).toBe(parseEther("0.5"));
-    });
-
-    test("for a token amount typed as .5", async () => {
-        // 100 TOK.
-        await openSend(TOKEN, 100000000n);
-        el("send-amount").value = ".5";
-        await review();
-        expect(text("confirm-amount")).toBe("0.5000 TOK");
-
-        await signAndSend();
-        expect(text("wait-tx-summary")).toBe("0.5000 TOK");
-        const [, amount] = transferIface.decodeFunctionData(
-            "transfer",
-            broadcastTx().data,
-        );
-        expect(amount).toBe(500000n);
-    });
-
-    test("for a Max amount with many decimals", async () => {
-        await openSend("ETH");
-        await el("btn-send-max").handlers.get("click")();
-        // The balance minus 21000 gas at 20 gwei.
-        expect(el("send-amount").value).toBe("1.234147890123456789");
-        await review();
-        expect(text("confirm-amount")).toBe("1.2341 ETH");
-
-        await signAndSend();
-        expect(text("wait-tx-summary")).toBe("1.2341 ETH");
-        expect(broadcastTx().value).toBe(BALANCE_WEI - 21000n * 20n * GWEI);
-    });
-
-    // Cut to four decimals it would read 0.0000, so it is shown to its first
-    // significant digit instead, and signed in full.
-    test("for a tiny nonzero amount", async () => {
-        await openSend("ETH");
-        el("send-amount").value = "0.000012345";
-        await review();
-        expect(text("confirm-amount")).toBe("0.00001 ETH");
-
-        await signAndSend();
-        expect(text("wait-tx-summary")).toBe("0.00001 ETH");
-        expect(broadcastTx().value).toBe(parseEther("0.000012345"));
-    });
-
-    test("for a token amount", async () => {
-        // 100 TOK.
-        await openSend(TOKEN, 100000000n);
-        el("send-amount").value = "12.345678";
-        await review();
-        expect(text("confirm-amount")).toBe("12.3456 TOK");
-
-        await signAndSend();
-        expect(text("wait-tx-summary")).toBe("12.3456 TOK");
-        const tx = broadcastTx();
-        expect(tx.to).toBe(getAddress(TOKEN));
-        const [to, amount] = transferIface.decodeFunctionData(
-            "transfer",
-            tx.data,
-        );
-        expect(to).toBe(RECIPIENT);
-        expect(amount).toBe(12345678n);
-    });
-
-    test("on the success screen", async () => {
-        await openSend("ETH");
-        el("send-amount").value = "0.5";
-        await review();
-        await signAndSend();
-        // A popup opened later resumes the wait, and the receipt is there.
-        mockNode.receipt = { blockNumber: 21000000 };
-        txStatus.restoreWait();
-        await settle();
-        expect(state.currentView).toBe("success-tx");
-        expect(text("success-tx-summary")).toBe("0.5000 ETH");
-    });
-
-    test("on the error screen", async () => {
-        await openSend("ETH");
-        el("send-amount").value = "0.5";
-        await review();
-        mockNode.broadcastError = new Error("the node refused it");
-        await signAndSend();
-        expect(state.currentView).toBe("error-tx");
-        expect(text("error-tx-summary")).toBe("0.5000 ETH");
-    });
-});

tests/confirmTxFeeBound.test.js

@@ -11,115 +11,20 @@
 //
 // The check is driven here with a fake connected signer rather than a real
 // one: populateTransaction() returns the fees the node would have produced,
-// and sendTransaction() records whether the send actually happened.
-//
-// The last test drives the real confirmation screen instead, with only the
-// node and the DOM stubbed: a gas limit over its own bound at an ordinary fee
-// is refused in the same box as a fee over the bound
-// (https://git.eeqj.de/sneak/AutistMask/issues/583). That the box moves
-// nothing on the screen is checked by the Chrome e2e suite.
+// and sendTransaction() records whether the send actually happened. The real
+// DOM path around it — reading the fee error into the reserved errors box — is
+// covered by the Chrome e2e suite.
 
-// What the stub node quotes for that test: a gas limit of 150,000,000 at a
-// maximum fee of 2 gwei per gas, 0.3 ETH in all. And the signed transactions
-// it was handed.
-const mockNode = {
-    gasLimit: 150000000n,
-    maxFeePerGas: 2000000000n,
-    broadcast: [],
+globalThis.chrome = {
+    storage: { local: { get: async () => ({}), set: async () => {} } },
 };
 
-jest.mock("ethers", () => {
-    const actual = jest.requireActual("ethers");
-    class StubProvider {
-        constructor(url, network) {
-            this.network = network;
-        }
-        async getNetwork() {
-            return this.network;
-        }
-        async getBalance() {
-            return actual.parseEther("5");
-        }
-        async getCode() {
-            return "0x";
-        }
-        async getTransactionCount() {
-            return 1;
-        }
-        async getFeeData() {
-            return {
-                maxFeePerGas: mockNode.maxFeePerGas,
-                maxPriorityFeePerGas: 1000000000n,
-                gasPrice: 1000000000n,
-            };
-        }
-        async estimateGas() {
-            return mockNode.gasLimit;
-        }
-        async broadcastTransaction(signed) {
-            mockNode.broadcast.push(signed);
-            return { hash: "0x" + "ab".repeat(32) };
-        }
-    }
-    return { ...actual, JsonRpcProvider: StubProvider };
-});
-
-// The screens a send that was not refused goes on to.
-jest.mock("../src/popup/views/txStatus", () => ({
-    showWait: jest.fn(),
-    showError: jest.fn(),
-}));
-
-const { makeStorageStub } = require("./support/storageStub");
-global.chrome = { storage: makeStorageStub(), runtime: { sendMessage() {} } };
-
 global.fetch = jest.fn(() => {
     throw new Error("tests must not perform network requests");
 });
 
-// A stub DOM: every id resolves to a recording element.
-const elements = new Map();
-
-function makeEl(id) {
-    const handlers = new Map();
-    return {
-        id,
-        textContent: "",
-        innerHTML: "",
-        value: "",
-        disabled: false,
-        style: {},
-        dataset: {},
-        classList: {
-            add() {},
-            remove() {},
-            toggle() {},
-            contains: () => false,
-        },
-        handlers,
-        addEventListener(name, fn) {
-            handlers.set(name, fn);
-        },
-        querySelectorAll: () => [],
-        remove() {},
-    };
-}
-
-global.document = {
-    getElementById(id) {
-        if (!elements.has(id)) elements.set(id, makeEl(id));
-        return elements.get(id);
-    },
-};
-
-const { Wallet } = require("ethers");
-const { encryptWithPassword } = require("../src/shared/vault");
-const { state, loadState } = require("../src/shared/state");
-const txStatus = require("../src/popup/views/txStatus");
-const confirmTx = require("../src/popup/views/confirmTx");
-const { populateVerifyAndSend } = confirmTx;
+const { populateVerifyAndSend } = require("../src/popup/views/confirmTx");
 const {
-    MAX_GAS_LIMIT,
     MAX_FEE_PER_GAS,
     MAX_TOTAL_FEE,
 } = require("../src/shared/approvalVerify");
@@ -193,69 +98,3 @@ describe("populateVerifyAndSend enforces the combined fee bound", () => {
         expect(signer.sent[0].gasLimit).toBe(under.gasLimit);
     });
 });
-
-describe("Sign & Send on the confirmation screen", () => {
-    const PRIVATE_KEY = "0x" + "11".repeat(32);
-    const PASSWORD = "correct horse battery staple";
-    let encryptedSecret;
-
-    beforeAll(async () => {
-        await loadState();
-        encryptedSecret = await encryptWithPassword(PRIVATE_KEY, PASSWORD);
-    });
-
-    function el(id) {
-        return global.document.getElementById(id);
-    }
-
-    function shown(id) {
-        return el(id).style.visibility === "visible";
-    }
-
-    // show() reads the balance and estimates the fee without awaiting
-    // either; this lets both finish.
-    async function settle() {
-        for (let i = 0; i < 10; i++) await new Promise((r) => setTimeout(r, 0));
-    }
-
-    test("refuses a gas limit over its bound at an ordinary fee in the box for a refused gas limit or fee, and sends nothing", async () => {
-        expect(mockNode.gasLimit).toBeGreaterThan(MAX_GAS_LIMIT);
-        expect(mockNode.gasLimit * mockNode.maxFeePerGas).toBeLessThan(
-            MAX_TOTAL_FEE,
-        );
-
-        const from = new Wallet(PRIVATE_KEY).address;
-        state.wallets = [
-            {
-                type: "key",
-                name: "Wallet 1",
-                encryptedSecret,
-                addresses: [{ address: from }],
-            },
-        ];
-        state.selectedWallet = 0;
-        state.selectedAddress = 0;
-        confirmTx.init({});
-        confirmTx.show({
-            from,
-            to: RECIPIENT,
-            ensName: null,
-            amount: "1",
-            token: "ETH",
-            tokenSymbol: null,
-            tokenDecimals: null,
-            max: false,
-        });
-        await settle();
-        expect(el("btn-confirm-send").disabled).toBe(false);
-        expect(shown("confirm-fee-bound-error")).toBe(false);
-
-        el("confirm-tx-password").value = PASSWORD;
-        await el("btn-confirm-send").handlers.get("click")();
-
-        expect(shown("confirm-fee-bound-error")).toBe(true);
-        expect(mockNode.broadcast).toEqual([]);
-        expect(txStatus.showWait).not.toHaveBeenCalled();
-        expect(txStatus.showError).not.toHaveBeenCalled();
-    });
-});

tests/confirmTxLateResult.test.js

@@ -1,221 +0,0 @@
-// A late answer for a confirmation screen the user has left changes nothing on
-// the screen shown since (https://git.eeqj.de/sneak/AutistMask/issues/575).
-//
-// The confirmation screen asks the node and the explorer about its transaction
-// without waiting for the answers: the recipient checks, which can show three
-// warning boxes, the balance read and the fee estimate. Back, a new recipient
-// and Review again show the screen for another transaction while those
-// questions may still be open. The recipient checks showed their boxes
-// whenever they answered, so a box about the first recipient could appear on
-// the second recipient's screen.
-//
-// Driven through the real confirmation screen, with only the node, the
-// explorer and the DOM stubbed. Each test holds back the first screen's answer
-// to one question, and gives it once the screen it tests is shown.
-
-"use strict";
-
-// The From address of every transaction here. The jest.mock() factory below
-// may only name outside variables whose names start with "mock".
-const mockFrom = "0x66133E8ea0f5D1d612D2502a968757D1048c214a";
-
-jest.mock("ethers", () => {
-    const actual = jest.requireActual("ethers");
-    // Every answer is a mock, so a test can hold one back. Every address has
-    // sent one transaction and has no code, and only the From address holds
-    // anything: 5 ETH.
-    class StubProvider {}
-    Object.assign(StubProvider.prototype, {
-        getBalance: jest.fn(async (address) =>
-            address === mockFrom ? actual.parseEther("5") : 0n,
-        ),
-        getCode: jest.fn(async () => "0x"),
-        getTransactionCount: jest.fn(async () => 1),
-        // 10 gwei expected, 20 gwei reserved per gas.
-        getFeeData: jest.fn(async () => ({
-            maxFeePerGas: 20000000000n,
-            maxPriorityFeePerGas: 1000000000n,
-            gasPrice: 10000000000n,
-        })),
-        estimateGas: jest.fn(async () => 21000n),
-    });
-    return { ...actual, JsonRpcProvider: StubProvider };
-});
-
-// An explorer address page whose title is `title`.
-function explorerPage(title) {
-    return { ok: true, text: async () => "<title>" + title + "</title>" };
-}
-
-// The explorer labels no address.
-global.fetch = jest.fn(async () => explorerPage("Etherscan"));
-
-const { makeStorageStub } = require("./support/storageStub");
-global.chrome = { storage: makeStorageStub(), runtime: { sendMessage() {} } };
-
-// A stub DOM: every id resolves to a recording element.
-const elements = new Map();
-
-function makeEl(id) {
-    return {
-        id,
-        textContent: "",
-        innerHTML: "",
-        value: "",
-        disabled: false,
-        style: {},
-        dataset: {},
-        classList: {
-            add() {},
-            remove() {},
-            toggle() {},
-            contains: () => false,
-        },
-        addEventListener() {},
-        querySelectorAll: () => [],
-        remove() {},
-    };
-}
-
-global.document = {
-    getElementById(id) {
-        if (!elements.has(id)) elements.set(id, makeEl(id));
-        return elements.get(id);
-    },
-};
-
-const { JsonRpcProvider, parseEther } = require("ethers");
-const { loadState } = require("../src/shared/state");
-const confirmTx = require("../src/popup/views/confirmTx");
-
-const node = JsonRpcProvider.prototype;
-const FIRST = "0xC0FfEE0000000000000000000000000000c0fFEe";
-const SECOND = "0xE2E0000000000000000000000000000000000E2e";
-
-function el(id) {
-    return global.document.getElementById(id);
-}
-
-function shown(id) {
-    return el(id).style.visibility === "visible";
-}
-
-// Show the confirmation screen for 1 ETH to `to` on mainnet, as Review on the
-// Send screen does.
-function review(to) {
-    confirmTx.show({
-        from: mockFrom,
-        to,
-        ensName: null,
-        amount: "1",
-        token: "ETH",
-        tokenSymbol: null,
-        tokenDecimals: null,
-        max: false,
-    });
-}
-
-// show() does not wait for its questions; this lets every answer not held
-// back arrive.
-async function settle() {
-    for (let i = 0; i < 10; i++) await new Promise((r) => setTimeout(r, 0));
-}
-
-// Hold back the next answer `question` gives. Returns the function that gives
-// it.
-function holdNextAnswer(question) {
-    let give;
-    question.mockImplementationOnce(() => new Promise((r) => (give = r)));
-    return (answer) => give(answer);
-}
-
-beforeAll(async () => {
-    await loadState();
-});
-
-beforeEach(() => {
-    elements.clear();
-});
-
-// The three boxes the recipient checks show, each with the question whose
-// answer shows it for FIRST, and that answer. FIRST holds no ETH, so the
-// answer that it has sent no transaction is what shows the box saying so.
-describe.each([
-    {
-        box: "confirm-contract-warning",
-        question: node.getCode,
-        answer: "0x6080604052",
-    },
-    {
-        box: "confirm-recipient-warning",
-        question: node.getTransactionCount,
-        answer: 0,
-    },
-    {
-        box: "confirm-etherscan-warning",
-        question: global.fetch,
-        answer: explorerPage(
-            "Fake_Phishing1 | Address: " + FIRST + " | Etherscan",
-        ),
-    },
-])("the $box box", ({ box, question, answer }) => {
-    test("is shown when the answer about the recipient arrives while its screen is shown", async () => {
-        const give = holdNextAnswer(question);
-        review(FIRST);
-        await settle();
-        expect(shown(box)).toBe(false);
-
-        give(answer);
-        await settle();
-        expect(shown(box)).toBe(true);
-    });
-
-    test("is not shown on the next recipient's screen when the answer about the first arrives after that screen is shown", async () => {
-        const give = holdNextAnswer(question);
-        review(FIRST);
-        await settle();
-        review(SECOND);
-        await settle();
-        expect(shown(box)).toBe(false);
-
-        give(answer);
-        await settle();
-        expect(shown(box)).toBe(false);
-    });
-});
-
-test("a balance read answered after the next screen is shown leaves that screen's balance and balance check as they are", async () => {
-    const give = holdNextAnswer(node.getBalance);
-    review(FIRST);
-    await settle();
-    review(SECOND);
-    await settle();
-    expect(el("confirm-balance").textContent).toBe("5.0000 ETH");
-
-    give(parseEther("0.5"));
-    await settle();
-    expect(el("confirm-balance").textContent).toBe("5.0000 ETH");
-    expect(shown("confirm-balance-error")).toBe(false);
-    expect(el("btn-confirm-send").disabled).toBe(false);
-});
-
-test("a fee estimate answered after the next screen is shown leaves that screen's fee as it is", async () => {
-    const give = holdNextAnswer(node.getFeeData);
-    review(FIRST);
-    await settle();
-    review(SECOND);
-    await settle();
-    expect(el("confirm-fee-amount").textContent).toBe("~0.0002 ETH");
-
-    // 100 times the fee the second screen was quoted.
-    give({
-        maxFeePerGas: 2000000000000n,
-        maxPriorityFeePerGas: 100000000000n,
-        gasPrice: 1000000000000n,
-    });
-    await settle();
-    expect(el("confirm-fee-amount").textContent).toBe("~0.0002 ETH");
-    expect(el("confirm-fee-reserve").textContent).toBe(
-        "up to 0.0004 ETH reserved",
-    );
-});

tests/confirmTxNetworkSwitch.test.js

@@ -15,37 +15,20 @@
 // reviewed for, because choosing that network again in Settings and pressing
 // Back only unhides it, and Sign & Send then sends from it.
 //
-// Its balance line and balance check are that network's balance, read from
-// that network's node each time the screen is drawn
-// (https://git.eeqj.de/sneak/AutistMask/issues/558), not the balance Send
-// handed over. The fee estimate after the read stays on that network when
-// the network is switched while the read runs.
-//
 // Driven through the real confirmation screen, signer and chain switch, with
 // only the node, fetch and the DOM stubbed. The stub node is on the network
-// its provider was built for, so a broadcast records the network it went to,
-// and a balance read answers with that network's balance.
+// its provider was built for, so a broadcast records the network it went to.
 
 "use strict";
 
-// The questions the stub node was asked for the balance, the fee and the
-// recipient checks, by method, network name and RPC URL, in order. The
-// balances it reports on each network, by network name: ETH in wei and the
-// token in its base units. The signed transactions it was handed, with its
-// network's chain id and RPC URL. And whether it quotes fees as a network
-// with no type-2 pricing does.
-const mockNode = {
-    asked: [],
-    balanceWei: {},
-    tokenUnits: {},
-    broadcast: [],
-    legacyFees: false,
-};
+// The questions the stub node was asked for the fee and the recipient checks,
+// by method, network name and RPC URL, in order. The signed transactions it
+// was handed, with its network's chain id and RPC URL. And whether it quotes
+// fees as a network with no type-2 pricing does.
+const mockNode = { asked: [], broadcast: [], legacyFees: false };
 
 jest.mock("ethers", () => {
     const actual = jest.requireActual("ethers");
-    // The selector of balanceOf(address).
-    const BALANCE_OF = "0x70a08231";
     class StubProvider {
         constructor(url, network) {
             this.url = url;
@@ -61,22 +44,6 @@ jest.mock("ethers", () => {
         async getNetwork() {
             return this.network;
         }
-        async getBalance() {
-            this.record("getBalance");
-            return mockNode.balanceWei[this.network.name];
-        }
-        // balanceOf() is the one contract call the screen makes before Sign
-        // & Send.
-        async call(tx) {
-            if (!tx.data.startsWith(BALANCE_OF)) {
-                throw new Error("the stub node answers only balanceOf()");
-            }
-            this.record("balanceOf");
-            return actual.AbiCoder.defaultAbiCoder().encode(
-                ["uint256"],
-                [mockNode.tokenUnits[this.network.name]],
-            );
-        }
         async getFeeData() {
             this.record("getFeeData");
             if (mockNode.legacyFees) {
@@ -191,13 +158,7 @@ global.document = {
 };
 global.navigator = { clipboard: { writeText() {} } };
 
-const {
-    BaseWallet,
-    JsonRpcProvider,
-    Transaction,
-    Wallet,
-    parseEther,
-} = require("ethers");
+const { BaseWallet, Transaction, Wallet } = require("ethers");
 const { encryptWithPassword } = require("../src/shared/vault");
 const { state, loadState, saveState } = require("../src/shared/state");
 const { onChainSwitch } = require("../src/shared/chainSwitch");
@@ -237,11 +198,6 @@ beforeAll(async () => {
 beforeEach(() => {
     elements.clear();
     mockNode.asked = [];
-    mockNode.balanceWei = {
-        mainnet: parseEther("5"),
-        sepolia: parseEther("5"),
-    };
-    mockNode.tokenUnits = { mainnet: 0n, sepolia: 0n };
     mockNode.broadcast = [];
     mockNode.legacyFees = false;
     global.fetch.mockClear();
@@ -256,7 +212,7 @@ afterEach(() => {
 
 // Show the confirmation screen for 1 of the native token on `networkId`, or
 // for the transfer `changes` makes of it, as Review on the Send screen does,
-// with its balance read and its fee estimate settled.
+// with its fee estimate settled.
 async function review(networkId, changes = {}) {
     await onChainSwitch(networkId);
     await reviewOnActiveNetwork(changes);
@@ -269,7 +225,7 @@ async function reviewOnActiveNetwork(changes = {}) {
             type: "key",
             name: "Wallet 1",
             encryptedSecret,
-            addresses: [{ address: HOLDER }],
+            addresses: [{ address: HOLDER, balance: "5.0" }],
         },
     ];
     state.selectedWallet = 0;
@@ -281,7 +237,9 @@ async function reviewOnActiveNetwork(changes = {}) {
         ensName: null,
         amount: "1",
         token: "ETH",
+        balance: "5.0",
         tokenSymbol: null,
+        tokenBalance: null,
         tokenDecimals: null,
         max: false,
         ...changes,
@@ -333,7 +291,7 @@ function expectNativeTransferOn(networkId) {
         "Native " + symbol + " transfer",
     );
     expect(el("confirm-amount").textContent).toBe(
-        "1.0000 " + symbol + usdOn(networkId, "$2,000.00"),
+        "1 " + symbol + usdOn(networkId, "$2,000.00"),
     );
     expect(el("confirm-balance").textContent).toBe(
         "5.0000 " + symbol + usdOn(networkId, "$10,000.00"),
@@ -365,24 +323,12 @@ function expectNativeTransferOn(networkId) {
     );
 }
 
-// show() reads the balance and then estimates the fee, and checks the
-// recipient, without awaiting any of them; this lets all of them finish.
+// show() estimates the fee and checks the recipient without awaiting either;
+// this lets both finish.
 async function settle() {
     for (let i = 0; i < 10; i++) await new Promise((r) => setTimeout(r, 0));
 }
 
-function errors() {
-    return el("confirm-errors").innerHTML;
-}
-
-function shown(id) {
-    return el(id).style.visibility === "visible";
-}
-
-function sendDisabled() {
-    return el("btn-confirm-send").disabled;
-}
-
 async function signAndSend() {
     el("confirm-tx-password").value = PASSWORD;
     await el("btn-confirm-send").handlers.get("click")();
@@ -413,10 +359,9 @@ test("a transfer reviewed after the active network's RPC endpoint was changed in
     await reviewOnActiveNetwork();
 
     expect(mockNode.asked).toEqual([
-        { method: "getBalance", network: "sepolia", url: newNode },
+        { method: "getFeeData", network: "sepolia", url: newNode },
         { method: "getCode", network: "sepolia", url: newNode },
         { method: "getTransactionCount", network: "sepolia", url: newNode },
-        { method: "getFeeData", network: "sepolia", url: newNode },
     ]);
 });
 
@@ -440,8 +385,12 @@ describe.each([
             expect(mockNode.broadcast).toEqual([]);
             expect(txStatus.showWait).not.toHaveBeenCalled();
             expect(txStatus.showError).not.toHaveBeenCalled();
-            expect(shown("confirm-network-changed-error")).toBe(true);
-            expect(shown("confirm-fee-bound-error")).toBe(false);
+            expect(el("confirm-errors").style.visibility).toBe("visible");
+            expect(el("confirm-errors").innerHTML).toContain(
+                "The active network changed after this transaction was" +
+                    " reviewed, so it was not sent. Please go back and review" +
+                    " it again.",
+            );
         });
     },
 );
@@ -462,7 +411,7 @@ describe.each([
             expectNativeTransferOn(reviewedOn);
             expect(mockNode.asked).toEqual([
                 {
-                    method: "getBalance",
+                    method: "getFeeData",
                     network: reviewedOn,
                     url: ownNode(reviewedOn),
                 },
@@ -476,11 +425,6 @@ describe.each([
                     network: reviewedOn,
                     url: ownNode(reviewedOn),
                 },
-                {
-                    method: "getFeeData",
-                    network: reviewedOn,
-                    url: ownNode(reviewedOn),
-                },
             ]);
             expect(global.fetch.mock.calls.map(([url]) => url)).toEqual([
                 explorerUrl + "/address/" + RECIPIENT,
@@ -493,7 +437,10 @@ describe.each([
             expect(mockNode.broadcast).toEqual([]);
             expect(txStatus.showWait).not.toHaveBeenCalled();
             expect(txStatus.showError).not.toHaveBeenCalled();
-            expect(shown("confirm-network-changed-error")).toBe(true);
+            expect(el("confirm-errors").innerHTML).toContain(
+                "The active network changed after this transaction was" +
+                    " reviewed, so it was not sent.",
+            );
         });
 
         test("is sent on that network, as described, once it is chosen in Settings again and Back pressed", async () => {
@@ -525,103 +472,15 @@ describe.each([
             await review(reviewedOn, { amount: "10" });
             await switchReopenAndGoBack(reviewedOn, switchedTo);
 
-            expect(shown("confirm-balance-error")).toBe(true);
-            expect(el("confirm-balance-error").textContent).toBe(
-                "Your " +
+            expect(el("confirm-errors").innerHTML).toContain(
+                "Insufficient balance. You have 5.0000 " +
                     symbol +
-                    " balance does not cover this amount. Please go back and" +
-                    " send a smaller amount.",
+                    " but are trying to send 10 " +
+                    symbol +
+                    ".",
             );
         });
 
-        test("states and checks that network's balance as it is then, which no longer covers the send", async () => {
-            await review(reviewedOn);
-            expect(sendDisabled()).toBe(false);
-            mockNode.balanceWei = {
-                [reviewedOn]: parseEther("0.5"),
-                [switchedTo]: parseEther("5"),
-            };
-            await switchReopenAndGoBack(reviewedOn, switchedTo);
-
-            expect(el("confirm-balance").textContent).toBe(
-                "0.5000 " + symbol + usdOn(reviewedOn, "$1,000.00"),
-            );
-            expect(shown("confirm-balance-error")).toBe(true);
-            expect(sendDisabled()).toBe(true);
-        });
-
-        test("states and checks that network's balance as it is then, which now covers the send, and refuses to send it", async () => {
-            mockNode.balanceWei[reviewedOn] = parseEther("0.5");
-            await review(reviewedOn);
-            expect(sendDisabled()).toBe(true);
-            mockNode.balanceWei = {
-                [reviewedOn]: parseEther("5"),
-                [switchedTo]: parseEther("0.5"),
-            };
-            await switchReopenAndGoBack(reviewedOn, switchedTo);
-
-            expect(el("confirm-balance").textContent).toBe(
-                "5.0000 " + symbol + usdOn(reviewedOn, "$10,000.00"),
-            );
-            expect(errors()).toBe("");
-            expect(shown("confirm-balance-error")).toBe(false);
-            expect(shown("confirm-amount-fee-error")).toBe(false);
-            expect(sendDisabled()).toBe(false);
-
-            await signAndSend();
-
-            expect(signTransaction).not.toHaveBeenCalled();
-            expect(mockNode.broadcast).toEqual([]);
-            expect(shown("confirm-network-changed-error")).toBe(true);
-        });
-
-        const tokenSend = {
-            token: TOKEN,
-            tokenSymbol: "TOK",
-            tokenDecimals: 6,
-        };
-
-        test("of a token, states and checks that network's token balance as it is then, which no longer covers the send", async () => {
-            mockNode.tokenUnits[reviewedOn] = 10000000n;
-            await review(reviewedOn, tokenSend);
-            expect(sendDisabled()).toBe(false);
-            mockNode.tokenUnits = {
-                [reviewedOn]: 500000n,
-                [switchedTo]: 10000000n,
-            };
-            await switchReopenAndGoBack(reviewedOn, switchedTo);
-
-            expect(el("confirm-balance").textContent).toBe("0.5000 TOK");
-            expect(shown("confirm-balance-error")).toBe(true);
-            expect(el("confirm-balance-error").textContent).toBe(
-                "Your TOK balance does not cover this amount. Please go back" +
-                    " and send a smaller amount.",
-            );
-            expect(sendDisabled()).toBe(true);
-        });
-
-        test("of a token, states and checks that network's token balance as it is then, which now covers the send, and refuses to send it", async () => {
-            await review(reviewedOn, tokenSend);
-            expect(sendDisabled()).toBe(true);
-            mockNode.tokenUnits = {
-                [reviewedOn]: 10000000n,
-                [switchedTo]: 0n,
-            };
-            await switchReopenAndGoBack(reviewedOn, switchedTo);
-
-            expect(el("confirm-balance").textContent).toBe("10.0000 TOK");
-            expect(errors()).toBe("");
-            expect(shown("confirm-balance-error")).toBe(false);
-            expect(shown("confirm-gas-error")).toBe(false);
-            expect(sendDisabled()).toBe(false);
-
-            await signAndSend();
-
-            expect(signTransaction).not.toHaveBeenCalled();
-            expect(mockNode.broadcast).toEqual([]);
-            expect(shown("confirm-network-changed-error")).toBe(true);
-        });
-
         test("with a fee quoted by a node with no type-2 pricing, shows the fee in that network's native currency and price", async () => {
             await review(reviewedOn);
             mockNode.legacyFees = true;
@@ -633,10 +492,10 @@ describe.each([
         });
 
         test("of an ERC-20 token, links the token contract to that network's explorer and prices the token by that network", async () => {
-            mockNode.tokenUnits[reviewedOn] = 50000000n;
             await review(reviewedOn, {
                 token: TOKEN,
                 tokenSymbol: "USDC",
+                tokenBalance: "50",
                 tokenDecimals: 6,
                 amount: "10",
             });
@@ -649,7 +508,7 @@ describe.each([
                 `href="${explorerUrl}/address/${TOKEN}"`,
             );
             expect(el("confirm-amount").textContent).toBe(
-                "10.0000 USDC" + usdOn(reviewedOn, "$10.00"),
+                "10 USDC" + usdOn(reviewedOn, "$10.00"),
             );
             expect(el("confirm-balance").textContent).toBe(
                 "50.0000 USDC" + usdOn(reviewedOn, "$50.00"),
@@ -677,101 +536,3 @@ test("the send is refused by a signer on another network's node", async () => {
     expect(signTransaction).not.toHaveBeenCalled();
     expect(mockNode.broadcast).toEqual([]);
 });
-
-describe("the balance read", () => {
-    test("leaves the balance line Loading... and Sign & Send disabled until it returns", async () => {
-        let answer;
-        const getBalance = jest
-            .spyOn(JsonRpcProvider.prototype, "getBalance")
-            .mockImplementationOnce(() => new Promise((r) => (answer = r)));
-        try {
-            await review("sepolia");
-        } finally {
-            getBalance.mockRestore();
-        }
-        expect(el("confirm-balance").textContent).toBe("Loading...");
-        expect(el("confirm-fee-amount").textContent).toBe("Estimating...");
-        expect(el("confirm-errors").style.visibility).toBe("hidden");
-        expect(shown("confirm-balance-error")).toBe(false);
-        expect(shown("confirm-balance-read-error")).toBe(false);
-        expect(sendDisabled()).toBe(true);
-
-        answer(parseEther("5"));
-        await settle();
-        expect(el("confirm-balance").textContent).toBe("5.0000 SepoliaETH");
-        expect(sendDisabled()).toBe(false);
-    });
-
-    // The Chrome suite measures that nothing moves; this checks the message
-    // is already written, only hidden, before the read returns.
-    test("that finds the amount not covered only makes a message written before it visible", async () => {
-        let answer;
-        const getBalance = jest
-            .spyOn(JsonRpcProvider.prototype, "getBalance")
-            .mockImplementationOnce(() => new Promise((r) => (answer = r)));
-        try {
-            await review("sepolia");
-        } finally {
-            getBalance.mockRestore();
-        }
-        const message =
-            "Your SepoliaETH balance does not cover this amount. Please go" +
-            " back and send a smaller amount.";
-        expect(el("confirm-balance-error").textContent).toBe(message);
-        expect(shown("confirm-balance-error")).toBe(false);
-
-        answer(parseEther("0.5"));
-        await settle();
-        expect(el("confirm-balance-error").textContent).toBe(message);
-        expect(shown("confirm-balance-error")).toBe(true);
-        expect(errors()).toBe("");
-        expect(sendDisabled()).toBe(true);
-    });
-
-    // The fee is estimated once the read returns, after the switch, and still
-    // asks the node of the network the screen was drawn for.
-    test("still in flight when Sepolia is chosen in Settings leaves the balance and the fee on mainnet", async () => {
-        let answer;
-        const getBalance = jest
-            .spyOn(JsonRpcProvider.prototype, "getBalance")
-            .mockImplementationOnce(() => new Promise((r) => (answer = r)));
-        try {
-            await review("mainnet");
-        } finally {
-            getBalance.mockRestore();
-        }
-        const feeAskedOn = () =>
-            mockNode.asked
-                .filter((q) => q.method === "getFeeData")
-                .map((q) => q.network);
-        expect(feeAskedOn()).toEqual([]);
-
-        await onChainSwitch("sepolia");
-        answer(parseEther("5"));
-        await settle();
-
-        expect(feeAskedOn()).toEqual(["mainnet"]);
-        expect(el("confirm-balance").textContent).toBe("5.0000 ETH");
-        // 21000 gas at 10 gwei expected, at 20 gwei reserved.
-        expect(el("confirm-fee-amount").textContent).toBe("~0.0002 ETH");
-        expect(el("confirm-fee-reserve").textContent).toBe(
-            "up to 0.0004 ETH reserved",
-        );
-    });
-
-    test("that fails states the balance as unknown, not zero, and blocks sending", async () => {
-        const getBalance = jest
-            .spyOn(JsonRpcProvider.prototype, "getBalance")
-            .mockRejectedValueOnce(new Error("the node did not answer"));
-        try {
-            await review("sepolia");
-        } finally {
-            getBalance.mockRestore();
-        }
-        expect(el("confirm-balance").textContent).toBe("unknown (SepoliaETH)");
-        expect(shown("confirm-balance-read-error")).toBe(true);
-        expect(shown("confirm-balance-error")).toBe(false);
-        expect(errors()).toBe("");
-        expect(sendDisabled()).toBe(true);
-    });
-});

tests/contractCreation.test.js

@@ -192,7 +192,6 @@ describe("the wait, success and error screens", () => {
         amount: "0.0000",
         token: "ETH",
         tokenSymbol: null,
-        chainId: "0x1",
     };
     const transfer = { ...creation, to: RECIPIENT };
 

tests/e2e/network.js

@@ -226,9 +226,8 @@ const RPC_RESULTS = {
 // The "latest" block, which ethers' getFeeData() reads baseFeePerGas from
 // to derive maxFeePerGas. Without it every fee is a legacy gasPrice, the
 // reserve and the estimate collapse to the same number, and the gate tests
-// stop being able to distinguish them. opts.baseFeeWei replaces its base fee,
-// read at request time like every other fixture switch.
-function latestBlock(opts) {
+// stop being able to distinguish them.
+function latestBlock() {
     return {
         hash: "0x" + "11".repeat(32),
         parentHash: "0x" + "22".repeat(32),
@@ -240,26 +239,21 @@ function latestBlock(opts) {
         gasUsed: "0xf4240",
         miner: STUB_COUNTERPARTY,
         extraData: "0x",
-        baseFeePerGas: opts.baseFeeWei || hex(BASE_FEE_WEI),
+        baseFeePerGas: hex(BASE_FEE_WEI),
         transactions: [],
     };
 }
 
-// keccak("decimals()")[0:4], and the same for symbol(), name() and
-// balanceOf(address).
+// keccak("decimals()")[0:4], and the same for symbol() and name().
 const SELECTOR_DECIMALS = "0x313ce567";
 const SELECTOR_SYMBOL = "0x95d89b41";
 const SELECTOR_NAME = "0x06fdde03";
-const SELECTOR_BALANCE_OF = "0x70a08231";
 
-// Every eth_call still answers with a zero word except decimals(), symbol(),
-// name() and balanceOf() on the stub token. The wallet reads decimals() back
-// at signing time to compare with the scale the confirmation screen rendered
-// (issue #305). Adding the token by its contract address reads the first three
-// (issue #295); symbol() and name() answer what the explorer reports for it.
-// The confirmation screen reads balanceOf()
-// (https://git.eeqj.de/sneak/AutistMask/issues/558), which answers the holding
-// the explorer reports, or zero when no holding is seeded.
+// Every eth_call still answers with a zero word except decimals(), symbol()
+// and name() on the stub token. The wallet reads decimals() back at signing
+// time to compare with the scale the confirmation screen rendered (issue
+// #305). Adding the token by its contract address reads all three (issue
+// #295); symbol() and name() answer what the explorer reports for it.
 //
 // opts.tokenDecimalsOverride is the lying contract: set it and decimals()
 // answers something other than the value this same fixture reports through
@@ -284,9 +278,6 @@ function ethCallResult(req, opts) {
     if (data.startsWith(SELECTOR_NAME)) {
         return abi.encode(["string"], [tokenObject(opts).name]);
     }
-    if (data.startsWith(SELECTOR_BALANCE_OF) && opts.seedTokenBalance) {
-        return word(tokenBalanceItems(opts)[0].value);
-    }
     return ZERO_WORD;
 }
 
@@ -429,10 +420,9 @@ const HOLD_MAX_MS = 30000;
 
 // Hold a reply open for as long as the test asks: until opts[name] is false.
 //
-// The switch (holdBalance, holdGasEstimate, holdTransactionCount or
-// holdBlockscout) is read here rather than captured, so a test flips it on the
-// same options object the route was registered with — the same pattern as
-// seedTokenTransfer. This is
+// The switch (holdGasEstimate, holdTransactionCount or holdBlockscout) is read
+// here rather than captured, so a test flips it on the same options object the
+// route was registered with — the same pattern as seedTokenTransfer. This is
 // the only way to observe a screen while its request is genuinely in flight;
 // sampling the screen and hoping to win a race against the network would
 // assert nothing on a slow machine.
@@ -482,7 +472,7 @@ function rpcReply(req, opts, report) {
         });
     }
     if (req.method === "eth_getBlockByNumber") {
-        return Object.assign(envelope, { result: latestBlock(opts) });
+        return Object.assign(envelope, { result: latestBlock() });
     }
     // The end of the dApp transaction round trip: the raw signed transaction
     // the background hands to the node. It is recorded verbatim so a test can
@@ -567,9 +557,6 @@ async function handleRpc(route, postData, opts, report) {
         report("unstubbed request: POST " + route.request().url());
         return route.abort();
     }
-    if (batch.some((req) => req.method === "eth_getBalance")) {
-        await awaitRelease(opts, "holdBalance", report);
-    }
     if (batch.some((req) => req.method === "eth_estimateGas")) {
         await awaitRelease(opts, "holdGasEstimate", report);
     }
@@ -626,12 +613,8 @@ function traceEnabled(raw) {
  * @param {string} [opts.ethBalanceWei]  hex wei answered to eth_getBalance;
  *   defaults to zero, which is what every test that predates the funded
  *   fixture expects.
- * @param {string} [opts.baseFeeWei]  hex wei answered as the latest block's
- *   baseFeePerGas; defaults to BASE_FEE_WEI. Read at request time.
  * @param {boolean} [opts.failGasEstimate]  answer eth_estimateGas with a
  *   node-side refusal.
- * @param {boolean} [opts.holdBalance]  hold every batch containing an
- *   eth_getBalance until this is cleared again.
  * @param {boolean} [opts.holdGasEstimate]  hold every batch containing an
  *   eth_estimateGas until this is cleared again.
  * @param {boolean} [opts.holdTransactionCount]  hold every batch containing an

tests/e2e/run.js

@@ -1824,65 +1824,6 @@ test("the Settings assertions above all ran (#229)", async (env) => {
     );
 });
 
-// ------------------------------------------------ testnet banner (#511)
-
-// This suite runs a release build, so the red banner at the top reads
-// "[TESTNET]" on Sepolia and is absent on mainnet. A network switch in
-// Settings must change it while Settings is still on screen; it used to
-// change only when the next screen came up
-// (https://git.eeqj.de/sneak/AutistMask/issues/511).
-
-// The banner's text, or null when there is none, once the switch to `net`
-// has finished. The switch's flash is the last thing its handler does, and
-// showView() clears the flash, so the banner read while that flash is up is
-// the one the switch left on the screen it was made from.
-async function bannerAfterSwitch(page, net) {
-    await page.waitForFunction(
-        (text) => document.getElementById("flash-msg").textContent === text,
-        "Switched to " + net.name + ".",
-    );
-    return page.evaluate(() => {
-        const banner = document.getElementById("debug-banner");
-        return {
-            text: banner === null ? null : banner.textContent,
-            onSettings: !document
-                .getElementById("view-settings")
-                .classList.contains("hidden"),
-        };
-    });
-}
-
-test("a network switch in Settings shows and removes the testnet banner at once (#511)", async (env) => {
-    const { mainnet, sepolia } = NETWORKS;
-    await openSettings(env.page);
-    assert(
-        (await env.page.locator("#debug-banner").count()) === 0,
-        "a banner is up on mainnet before the switch",
-    );
-
-    await env.page.selectOption("#settings-network", "sepolia");
-    let after = await bannerAfterSwitch(env.page, sepolia);
-    assert(after.onSettings, "Settings left the screen on the switch");
-    assert(
-        after.text === "[TESTNET]",
-        "after the switch to Sepolia, Settings shows the banner " +
-            JSON.stringify(after.text) +
-            ', expected "[TESTNET]"',
-    );
-
-    await env.page.selectOption("#settings-network", "mainnet");
-    after = await bannerAfterSwitch(env.page, mainnet);
-    assert(after.onSettings, "Settings left the screen on the switch back");
-    assert(
-        after.text === null,
-        "after the switch back to mainnet, Settings still shows the banner " +
-            JSON.stringify(after.text),
-    );
-
-    await env.page.click("#btn-settings-back");
-    await visible(env.page, "#view-main");
-});
-
 // ------------------------------------------------ dust threshold (#233)
 
 // The popup size README documents the UI as designed for. Pages in this
@@ -2291,8 +2232,7 @@ function feeEth(wei) {
 
 // What the confirmation screen is showing right now, read out of the DOM in
 // one pass: whether sending is allowed, which reason it is giving, what the
-// fee block says, how tall the whole view is, and where the password field and
-// Sign & Send sit in it.
+// fee block says, and how tall the whole view is.
 async function confirmState(page) {
     return page.evaluate(() => {
         const el = (id) => document.getElementById(id);
@@ -2305,12 +2245,6 @@ async function confirmState(page) {
         };
         return {
             height: el("view-confirm-tx").getBoundingClientRect().height,
-            passwordTop:
-                el("confirm-tx-password").getBoundingClientRect().top -
-                el("view-confirm-tx").getBoundingClientRect().top,
-            sendTop:
-                el("btn-confirm-send").getBoundingClientRect().top -
-                el("view-confirm-tx").getBoundingClientRect().top,
             type: el("confirm-type").textContent.trim(),
             balance: el("confirm-balance").textContent.trim(),
             fee: el("confirm-fee-amount").textContent.trim(),
@@ -2319,18 +2253,9 @@ async function confirmState(page) {
             errors: shown("confirm-errors")
                 ? el("confirm-errors").textContent.trim()
                 : "",
-            balanceError: shown("confirm-balance-error")
-                ? el("confirm-balance-error").textContent.trim()
-                : "",
             amountFeeError: shown("confirm-amount-fee-error"),
             gasError: shown("confirm-gas-error"),
             feeUnknownError: shown("confirm-fee-unknown-error"),
-            // Its sentence is wrapped across lines in index.html.
-            feeBoundError: shown("confirm-fee-bound-error")
-                ? el("confirm-fee-bound-error")
-                      .textContent.replace(/\s+/g, " ")
-                      .trim()
-                : "",
             sendDisabled: el("btn-confirm-send").disabled,
         };
     });
@@ -2346,16 +2271,6 @@ async function waitForEstimate(page) {
     );
 }
 
-async function waitForBalance(page) {
-    await page.waitForFunction(
-        () =>
-            document.getElementById("confirm-balance").textContent.trim() !==
-            "Loading...",
-        null,
-        { timeout: 60000 },
-    );
-}
-
 async function backToAddress(page) {
     if (await page.isVisible("#view-confirm-tx")) {
         await page.click("#btn-confirm-back");
@@ -2367,14 +2282,13 @@ async function backToAddress(page) {
     await openAddressDetail(page);
 }
 
-// Drive the popup to the confirmation screen for one send, and return as soon
-// as the screen is shown, its balance read still in flight.
+// Drive the popup to the confirmation screen for one send.
 //
 // It waits for the send screen to be showing `balance`, the fixture's balance
 // as that screen displays it, before filling anything in. Waiting for it —
 // rather than for a refresh to have probably landed — is what keeps every
 // assertion below deterministic after a fixture change.
-async function openConfirm(page, { token, balance, amount }) {
+async function goToConfirm(page, { token, balance, amount }) {
     await backToAddress(page);
     await page.click("#btn-send");
     await visible(page, "#view-send");
@@ -2389,14 +2303,6 @@ async function openConfirm(page, { token, balance, amount }) {
     await page.fill("#send-amount", amount);
     await page.click("#btn-send-review");
     await visible(page, "#view-confirm-tx");
-}
-
-// The same, returning once the screen has read the balance. It reads it
-// before it estimates the fee, so every state below is read with the balance
-// in place, the pending fee included.
-async function goToConfirm(page, send) {
-    await openConfirm(page, send);
-    await waitForBalance(page);
     await assertAddressesFit(page, "the confirmation screen");
 }
 
@@ -2472,10 +2378,7 @@ test("ConfirmTx blocks sending while the fee estimate is pending (#238)", async
         "the estimate-failed message is shown for an estimate that is merely pending",
     );
     assert(
-        !st.amountFeeError &&
-            !st.gasError &&
-            st.errors === "" &&
-            st.balanceError === "",
+        !st.amountFeeError && !st.gasError && st.errors === "",
         "a balance message is shown before the fee is known",
     );
 });
@@ -2506,7 +2409,6 @@ test("ConfirmTx enables Send once the estimate lands, quoting both numbers (#238
     );
     assert(
         st.errors === "" &&
-            st.balanceError === "" &&
             !st.amountFeeError &&
             !st.gasError &&
             !st.feeUnknownError,
@@ -2573,54 +2475,30 @@ test("ConfirmTx gates on the fee RESERVE, not the displayed estimate (#238)", as
     );
 });
 
-// The screen is first measured with its balance read held, so the message the
-// read brings must already hold its space when the read returns (#558).
-test("ConfirmTx refuses a send that exceeds the balance outright, and nothing moves when the balance arrives (#238)", async (env) => {
-    env.routeOpts.holdBalance = true;
-    let reading;
-    try {
-        await openConfirm(env.page, {
-            token: "ETH",
-            balance: FUNDED_ETH_TEXT + " ETH",
-            amount: OVER_BALANCE_AMOUNT,
-        });
-        reading = await confirmState(env.page);
-    } finally {
-        env.routeOpts.holdBalance = false;
-    }
-    assert(
-        reading.balance === "Loading...",
-        "the balance read was not held: " + JSON.stringify(reading.balance),
-    );
-    await waitForBalance(env.page);
+test("ConfirmTx refuses a send that exceeds the balance outright (#238)", async (env) => {
+    await goToConfirm(env.page, {
+        token: "ETH",
+        balance: FUNDED_ETH_TEXT + " ETH",
+        amount: OVER_BALANCE_AMOUNT,
+    });
     await waitForEstimate(env.page);
 
     const st = await confirmState(env.page);
-    assert(
-        st.balance === FUNDED_ETH_TEXT + " ETH",
-        "the confirmation screen shows the wrong balance: " +
-            JSON.stringify(st.balance),
-    );
     const want =
-        "Your ETH balance does not cover this amount. Please go back and" +
-        " send a smaller amount.";
+        "Insufficient balance. You have " +
+        FUNDED_ETH_TEXT +
+        " ETH but are trying to send " +
+        OVER_BALANCE_AMOUNT +
+        " ETH.";
     assert(
-        st.balanceError === want,
-        "wrong over-balance message: " + JSON.stringify(st.balanceError),
+        st.errors === want,
+        "wrong over-balance message: " + JSON.stringify(st.errors),
     );
     assert(st.sendDisabled, "Send is enabled for a send that exceeds balance");
     assert(
         !st.amountFeeError,
         "the amount-plus-fee message is shown for an amount that alone exceeds the balance",
     );
-    assert(
-        st.sendTop === reading.sendTop,
-        "Sign & Send moved when the balance read returned: " +
-            reading.sendTop +
-            "px -> " +
-            st.sendTop +
-            "px",
-    );
 });
 
 test("ConfirmTx refuses to send when the fee estimate fails, with its own message (#238)", async (env) => {
@@ -2664,10 +2542,7 @@ test("ConfirmTx refuses to send when the fee estimate fails, with its own messag
             "the estimate-failed message is not shown after a failed estimate",
         );
         assert(
-            !st.amountFeeError &&
-                !st.gasError &&
-                st.errors === "" &&
-                st.balanceError === "",
+            !st.amountFeeError && !st.gasError && st.errors === "",
             "a balance message is shown for an estimate that simply failed",
         );
         assert(
@@ -2758,19 +2633,21 @@ test("ConfirmTx refuses an ERC-20 send that exceeds the token balance (#238)", a
     await waitForEstimate(env.page);
 
     const st = await confirmState(env.page);
-    assert(
-        st.balance === TOKEN_BALANCE_TEXT + " " + STUB_TOKEN.symbol,
-        "the confirmation screen shows the wrong token balance: " +
-            JSON.stringify(st.balance),
-    );
     const want =
-        "Your " +
+        "Insufficient " +
         STUB_TOKEN.symbol +
-        " balance does not cover this amount. Please go back and send a" +
-        " smaller amount.";
+        " balance. You have " +
+        TOKEN_BALANCE_TEXT +
+        " " +
+        STUB_TOKEN.symbol +
+        " but are trying to send " +
+        OVER_TOKEN_AMOUNT +
+        " " +
+        STUB_TOKEN.symbol +
+        ".";
     assert(
-        st.balanceError === want,
-        "wrong over-token-balance message: " + JSON.stringify(st.balanceError),
+        st.errors === want,
+        "wrong over-token-balance message: " + JSON.stringify(st.errors),
     );
     assert(
         st.sendDisabled,
@@ -2826,9 +2703,9 @@ test("ConfirmTx gates the ERC-20 fee on the RESERVE, with the ERC-20 message (#2
         "the native-ETH over-budget message is shown on an ERC-20 transfer",
     );
     assert(
-        st.errors === "" && st.balanceError === "",
+        st.errors === "",
         "a token-balance message is shown for a transfer the token balance covers: " +
-            JSON.stringify(st.errors + st.balanceError),
+            JSON.stringify(st.errors),
     );
     assert(
         st.height === env.erc20PendingHeight,
@@ -2974,10 +2851,9 @@ async function goToTokenConfirm(env) {
         amount: TOKEN_AMOUNT,
     });
     await waitForEstimate(env.page);
-    // TOKEN_AMOUNT to four decimal places (README.md, Display Consistency).
     const shown = await shownAmount(env.page);
     assert(
-        shown === "0.2500 " + STUB_TOKEN.symbol,
+        shown === TOKEN_AMOUNT + " " + STUB_TOKEN.symbol,
         "the confirmation screen is not showing the amount that was entered: " +
             JSON.stringify(shown),
     );
@@ -3127,210 +3003,6 @@ test("a token that lies about decimals() at signing time broadcasts nothing (#30
     }
 });
 
-// ------------------------- a send Sign & Send refuses moves nothing (#583)
-//
-// README, No Layout Shift. Sign & Send refuses a send on the confirmation
-// screen when the active network changed since review and when its gas limit
-// or fee is over its bound, and each refusal's sentence sits in a box that held
-// its space from the first paint. This drives the total fee refusal, the longer
-// of the two sentences.
-
-// The base fee the stub node quotes once Sign & Send is pressed. ethers asks
-// twice it plus the 1 gwei priority fee per gas, 50,001 gwei, so the 21,000-gas
-// send would allow a fee of about 1.05 ETH, over the 1 ETH this wallet signs
-// for (MAX_TOTAL_FEE in src/shared/approvalVerify.js).
-const OVER_BOUND_BASE_FEE_WEI = 25000n * 10n ** 9n;
-
-test("a send refused for its fee leaves the password field and Sign & Send where they were (#583)", async (env) => {
-    env.errors.expect("confirmTx logging the refused send", /send refused/);
-    try {
-        await goToConfirm(env.page, {
-            token: "ETH",
-            balance: FUNDED_ETH_TEXT + " ETH",
-            amount: COMFORTABLE_AMOUNT,
-        });
-        await waitForEstimate(env.page);
-        const before = await confirmState(env.page);
-        assert(
-            !before.sendDisabled && before.feeBoundError === "",
-            "the screen is not ready to send: " + JSON.stringify(before),
-        );
-
-        // Only now, with the screen drawn and its fee estimated, does the
-        // node quote a fee over the bound.
-        env.routeOpts.baseFeeWei = toHexWei(OVER_BOUND_BASE_FEE_WEI);
-        const sent = env.routeOpts.broadcastTransactions.length;
-        await fillPasswordAndSend(env.page);
-        await env.page.waitForFunction(
-            () =>
-                getComputedStyle(
-                    document.getElementById("confirm-fee-bound-error"),
-                ).visibility === "visible",
-            null,
-            { timeout: 60000 },
-        );
-        const after = await confirmState(env.page);
-
-        // Printed pass or fail, as the dust threshold test does.
-        console.log(
-            "# refused send: password field top " +
-                before.passwordTop +
-                " -> " +
-                after.passwordTop +
-                "px, Sign & Send top " +
-                before.sendTop +
-                " -> " +
-                after.sendTop +
-                "px",
-        );
-        assert(
-            env.routeOpts.broadcastTransactions.length === sent,
-            "a send over the fee bound reached the RPC",
-        );
-        assert(
-            after.feeBoundError ===
-                "The gas limit or fee the RPC endpoint quoted for this" +
-                    " transaction is more than this wallet will sign for, so" +
-                    " it was not sent. Please go back and try again.",
-            "wrong fee refusal: " + JSON.stringify(after.feeBoundError),
-        );
-        assert(
-            after.passwordTop === before.passwordTop,
-            "the password field moved " +
-                (after.passwordTop - before.passwordTop) +
-                "px when the send was refused",
-        );
-        assert(
-            after.sendTop === before.sendTop,
-            "Sign & Send moved " +
-                (after.sendTop - before.sendTop) +
-                "px when the send was refused",
-        );
-    } finally {
-        env.routeOpts.baseFeeWei = undefined;
-        await backToAddress(env.page);
-    }
-});
-
-// --------- a send from an address the selected wallet does not hold (#609)
-//
-// The selection is saved apart from the confirmation screen, so the popup can
-// reopen onto the screen with a wallet selected that does not hold its From
-// address, and Sign & Send then refuses the send. Another popup selecting the
-// key wallet would save that selection; here it is written into storage, and
-// the popup reopened.
-
-test("a send from an address the selected wallet does not hold leaves the password field and Sign & Send where they were (#609)", async (env) => {
-    try {
-        // From the HD wallet's address.
-        await goToConfirm(env.page, {
-            token: "ETH",
-            balance: FUNDED_ETH_TEXT + " ETH",
-            amount: COMFORTABLE_AMOUNT,
-        });
-        // The screen's own save lands first, so it cannot write over the
-        // selection below.
-        await waitForPersisted(
-            env.page,
-            "currentView",
-            "confirm-tx",
-            "before selecting the key wallet",
-        );
-        await env.page.evaluate(
-            () =>
-                new Promise((resolve) => {
-                    chrome.storage.local.get("autistmask", (r) => {
-                        const record = {
-                            ...r.autistmask,
-                            selectedWallet: 1,
-                            selectedAddress: 0,
-                        };
-                        chrome.storage.local.set(
-                            { autistmask: record },
-                            resolve,
-                        );
-                    });
-                }),
-        );
-        await reopenPopup(env, "confirm-tx");
-        await waitForEstimate(env.page);
-        // The refusal shown anywhere on the screen, not only in its own box:
-        // shown on the password error line instead, the test fails on the
-        // moves checked below rather than on the wait for it.
-        const refusal = env.page
-            .locator("#view-confirm-tx")
-            .getByText("does not hold the From address above")
-            .filter({ visible: true });
-        const before = await confirmState(env.page);
-        assert(
-            !before.sendDisabled && (await refusal.count()) === 0,
-            "the screen is not ready to send: " + JSON.stringify(before),
-        );
-
-        const sent = env.routeOpts.broadcastTransactions.length;
-        await fillPasswordAndSend(env.page);
-        await refusal.waitFor({ timeout: 60000 });
-        const after = await confirmState(env.page);
-
-        // Printed pass or fail, as the dust threshold test does.
-        console.log(
-            "# refused From address: password field top " +
-                before.passwordTop +
-                " -> " +
-                after.passwordTop +
-                "px, Sign & Send top " +
-                before.sendTop +
-                " -> " +
-                after.sendTop +
-                "px",
-        );
-        assert(
-            env.routeOpts.broadcastTransactions.length === sent,
-            "a send from an address the selected wallet does not hold" +
-                " reached the RPC",
-        );
-        assert(
-            after.passwordTop === before.passwordTop,
-            "the password field moved " +
-                (after.passwordTop - before.passwordTop) +
-                "px when the send was refused",
-        );
-        assert(
-            after.sendTop === before.sendTop,
-            "Sign & Send moved " +
-                (after.sendTop - before.sendTop) +
-                "px when the send was refused",
-        );
-        // Only now, where the refusal is shown. Its sentence is wrapped across
-        // lines in index.html.
-        const shownIn = await refusal.evaluate((el) => ({
-            id: el.id,
-            text: el.textContent.replace(/\s+/g, " ").trim(),
-        }));
-        assert(
-            shownIn.id === "confirm-from-address-error" &&
-                shownIn.text ===
-                    "The selected wallet does not hold the From address above," +
-                        " so nothing was sent. Please go back and send again.",
-            "wrong From address refusal: " + JSON.stringify(shownIn),
-        );
-    } finally {
-        // A reopened popup restores no Send screen beneath this one, so Back
-        // lands on the selected address. Then Home, and the HD wallet's
-        // address, which the later tests send from.
-        if (await env.page.isVisible("#view-confirm-tx")) {
-            await env.page.click("#btn-confirm-back");
-        }
-        if (await env.page.isVisible("#view-send")) {
-            await env.page.click("#btn-send-back");
-        }
-        await visible(env.page, "#view-address");
-        await env.page.click("#btn-address-back");
-        await visible(env.page, "#view-main");
-        await openAddressDetail(env.page);
-    }
-});
-
 // ------------------------------ the wait for a receipt ending in error (#315)
 //
 // README.md (WaitTx) documents two ways the wait ends on the error screen: a
@@ -5187,9 +4859,6 @@ async function main() {
         seedTokenBalance: false,
         ethBalanceWei: null,
         failGasEstimate: false,
-        // Whether a JSON-RPC batch asking for a balance is held unanswered:
-        // the confirmation screen's own balance read (#558).
-        holdBalance: false,
         holdGasEstimate: false,
         // Whether a JSON-RPC batch asking for a transaction count is held
         // unanswered: the address scan after creating a wallet (#475).

tests/flashLine.test.js

@@ -80,7 +80,6 @@ describe.each([
         jest.doMock("../src/shared/state", () => ({
             state: { trackedTokens: [] },
             saveState,
-            currentNetwork: () => ({ chainId: 1 }),
         }));
         jest.doMock("../src/popup/views/helpers", () => ({
             $: element,

tests/nativeCurrency.test.js

@@ -17,10 +17,6 @@ jest.mock("ethers", () => {
         async lookupAddress() {
             return null;
         }
-        // The 1.5 of the native token the address holds on either network.
-        async getBalance() {
-            return 1500000000000000000n;
-        }
         // 10 gwei expected, 20 gwei reserved per gas.
         async getFeeData() {
             return { maxFeePerGas: 20000000000n, gasPrice: 10000000000n };
@@ -245,7 +241,7 @@ describe.each([
     test("the value", async () => {
         await confirmSend("0.1");
         expect(text("confirm-type")).toBe("Native " + symbol + " transfer");
-        expect(text("confirm-amount")).toBe("0.1000 " + symbol);
+        expect(text("confirm-amount")).toBe("0.1 " + symbol);
         await approveTx(NETWORKS[networkId].chainId);
         expect(text("approve-tx-value")).toBe("0.0100 " + symbol);
     });
@@ -343,11 +339,14 @@ describe.each([
 
     test("the insufficient-balance error", async () => {
         await confirmSend("2");
-        expect(text("confirm-balance-error")).toBe(
-            "Your " +
+        expect(
+            global.document.getElementById("confirm-errors").innerHTML,
+        ).toContain(
+            "You have 1.5000 " +
                 symbol +
-                " balance does not cover this amount. Please go back and send" +
-                " a smaller amount.",
+                " but are trying to send 2 " +
+                symbol +
+                ".",
         );
     });
 });
@@ -429,10 +428,10 @@ describe.each([
             await global.document
                 .getElementById("btn-confirm-send")
                 .handlers.get("click")();
-            expect(text("wait-tx-summary")).toBe("0.1000 " + symbol);
+            expect(text("wait-tx-summary")).toBe("0.1 " + symbol);
             state.networkId = activeNetworkId;
             txStatus.restoreWait();
-            expect(text("wait-tx-summary")).toBe("0.1000 " + symbol);
+            expect(text("wait-tx-summary")).toBe("0.1 " + symbol);
         });
 
         test("the transaction detail screen's type line and fee", async () => {

tests/persistedFieldContract.test.js

@@ -97,7 +97,6 @@ const {
     normalizePersisted,
 } = require("../src/shared/persistedState");
 const { stateProblem } = require("../src/shared/stateSchema");
-const { isKnownNetworkId } = require("../src/shared/networks");
 const { RESTORABLE_VIEWS } = require("../src/shared/restorableViews");
 const {
     bootPopup,
@@ -194,29 +193,6 @@ const CONTRACT = [
         floorOnly: [[1, 2], [null], [{}], [[TOKEN_ADDRESS]]],
         holds: (v) => everyEntry(v, (t) => isRecord(t) && isText(t.address)),
     },
-    {
-        field: "networkTrackedTokens",
-        kind: KIND.ENTRIES,
-        hostile: [42, "notarecord", { sepolia: "notalist" }],
-        floorOnly: [
-            [1, 2],
-            { sepolia: [1, 2] },
-            { mainnet: [null, {}, [TOKEN_ADDRESS]] },
-            { notanetwork: [{ address: TOKEN_ADDRESS }] },
-            JSON.parse('{"__proto__":[{"address":"0xabc"}]}'),
-        ],
-        // Each list is put straight back onto trackedTokens by
-        // applyChainSwitchFields() when its network becomes the active one, so
-        // it is floored the same way; a key that names no network is dropped.
-        holds: (v) =>
-            isRecord(v) &&
-            Object.getPrototypeOf(v) === Object.prototype &&
-            Object.keys(v).every(
-                (id) =>
-                    isKnownNetworkId(id) &&
-                    everyEntry(v[id], (t) => isRecord(t) && isText(t.address)),
-            ),
-    },
     {
         field: "allowedSites",
         kind: KIND.ENTRIES,
@@ -459,19 +435,6 @@ const CONTRACT = [
                 views: ["transaction"],
                 restored: false,
             },
-            // A chain id naming no network has no explorer to link to.
-            {
-                value: {
-                    tx: {
-                        hash: "0x1",
-                        from: ADDRESS,
-                        to: ADDRESS,
-                        chainId: "0x5",
-                    },
-                },
-                views: ["transaction"],
-                restored: false,
-            },
             // confirm-tx passes on `data.pendingTx`.
             {
                 value: { pendingTx: { amount: "1" } },
@@ -490,19 +453,6 @@ const CONTRACT = [
                 views: ["confirm-tx"],
                 restored: false,
             },
-            // The amount line splits the amount to cut it to four decimals.
-            {
-                value: {
-                    pendingTx: {
-                        token: "ETH",
-                        from: ADDRESS,
-                        to: ADDRESS,
-                        amount: 42,
-                    },
-                },
-                views: ["confirm-tx"],
-                restored: false,
-            },
             // A chain id naming no network has no explorer to link to.
             {
                 value: {
@@ -831,10 +781,11 @@ const WELL_FORMED_DATA = {
         from: ADDRESS,
         to: ADDRESS,
         amount: "1",
+        balance: "2",
     },
     pendingWait: {
         hash: "0x1",
-        txInfo: { to: ADDRESS, amount: "1", chainId: "0x1" },
+        txInfo: { to: ADDRESS, amount: "1" },
         broadcastTime: BROADCAST_TIME,
     },
 };

tests/sendAmountRule.test.js

@@ -23,10 +23,7 @@ jest.mock("../src/shared/log", () => ({
     isDebug: () => false,
 }));
 
-const { AbiCoder } = require("ethers");
-
-// What the confirmation screen asks the node for. The address holds the 1 ETH
-// and 250 TOK the wallet below records.
+// What the confirmation screen asks the node for.
 const mockProvider = {
     getFeeData: async () => ({
         maxFeePerGas: 2000000000n,
@@ -35,11 +32,7 @@ const mockProvider = {
     estimateGas: async () => 21000n,
     getCode: async () => "0x",
     getTransactionCount: async () => 1,
-    getBalance: async () => 1000000000000000000n,
-    // The one contract call the screen makes, balanceOf(), answered at the
-    // token's 6 decimal places.
-    call: async () =>
-        AbiCoder.defaultAbiCoder().encode(["uint256"], [250000000n]),
+    getBalance: async () => 0n,
 };
 
 jest.mock("../src/shared/balances", () => {

tests/sendDisplayFloor.test.js

@@ -18,7 +18,6 @@
 // What the stub node answers. Each test sets what it needs.
 const mockNode = {
     balanceWei: 0n,
-    tokenUnits: 0n,
     feeData: { maxFeePerGas: 1n, gasPrice: 1n },
 };
 
@@ -31,13 +30,6 @@ jest.mock("ethers", () => {
         async getBalance() {
             return mockNode.balanceWei;
         }
-        // balanceOf(), the one contract call these screens make.
-        async call() {
-            return actual.AbiCoder.defaultAbiCoder().encode(
-                ["uint256"],
-                [mockNode.tokenUnits],
-            );
-        }
         async lookupAddress() {
             return null;
         }
@@ -203,19 +195,10 @@ function errors() {
     return global.document.getElementById("confirm-errors").innerHTML;
 }
 
-// The message for an amount the balance does not cover, while it is shown.
-function balanceError() {
-    const box = global.document.getElementById("confirm-balance-error");
-    return box.style.visibility === "visible" ? box.textContent : "";
-}
-
 // The ETH balance the node reports and the token rows the explorer reports,
-// fetched and stored exactly where the popup stores them. The node reports the
-// token holding the explorer does.
+// fetched and stored exactly where the popup stores them.
 async function refreshWith(balanceWei, tokenItems = []) {
     mockNode.balanceWei = balanceWei;
-    mockNode.tokenUnits =
-        tokenItems.length > 0 ? BigInt(tokenItems[0].value) : 0n;
     mockExplorer.items = tokenItems;
     state.wallets = [{ name: "Wallet 1", addresses: [{ address: HOLDER }] }];
     state.selectedWallet = 0;
@@ -317,10 +300,9 @@ describe("a tracked token holding below 0.000001 never renders as zero", () => {
         await confirmSend("0.0000005", TOKEN);
         expect(text("confirm-balance")).toBe("0.0000005 TOK");
         expect(errors()).toBe("");
-        expect(balanceError()).toBe("");
         await confirmSend("0.0000006", TOKEN);
-        expect(balanceError()).toContain(
-            "Your TOK balance does not cover this amount.",
+        expect(errors()).toContain(
+            "You have 0.0000005 TOK but are trying to send 0.0000006 TOK.",
         );
     });
 
@@ -334,7 +316,6 @@ describe("a tracked token holding below 0.000001 never renders as zero", () => {
         await confirmSend("1.5", TOKEN);
         expect(text("confirm-balance")).toBe("1.5000 TOK");
         expect(errors()).toBe("");
-        expect(balanceError()).toBe("");
     });
 
     test("with more than 18 decimals and a holding below 10^-18", async () => {
@@ -348,8 +329,9 @@ describe("a tracked token holding below 0.000001 never renders as zero", () => {
         );
         await confirmSend("0.000000000000000001", TOKEN);
         expect(text("confirm-balance")).toBe("0.000000000000000000000001 TOK");
-        expect(balanceError()).toContain(
-            "Your TOK balance does not cover this amount.",
+        expect(errors()).toContain(
+            "You have 0.000000000000000000000001 TOK but are trying to send" +
+                " 0.000000000000000001 TOK.",
         );
     });
 });
@@ -374,10 +356,9 @@ describe("an untracked token holding below 0.000001 never renders as zero", () =
         await confirmSend("0.0000005", TOKEN);
         expect(text("confirm-balance")).toBe("0.0000005 TOK");
         expect(errors()).toBe("");
-        expect(balanceError()).toBe("");
         await confirmSend("0.0000006", TOKEN);
-        expect(balanceError()).toContain(
-            "Your TOK balance does not cover this amount.",
+        expect(errors()).toContain(
+            "You have 0.0000005 TOK but are trying to send 0.0000006 TOK.",
         );
     });
 });

tests/sendMax.test.js

@@ -17,7 +17,6 @@
 // What the stub node answers, and the signed transactions it was handed.
 const mockNode = {
     balanceWei: 0n,
-    tokenUnits: 0n,
     feeData: null,
     broadcast: [],
 };
@@ -31,14 +30,6 @@ jest.mock("ethers", () => {
         async getBalance() {
             return mockNode.balanceWei;
         }
-        // balanceOf(), the one contract call these screens make before Sign
-        // & Send.
-        async call() {
-            return actual.AbiCoder.defaultAbiCoder().encode(
-                ["uint256"],
-                [mockNode.tokenUnits],
-            );
-        }
         async lookupAddress() {
             return null;
         }
@@ -196,12 +187,9 @@ function text(id) {
 }
 
 // The ETH balance the node reports and the token rows the explorer reports,
-// fetched and stored exactly where the popup stores them. The node reports the
-// token holding the explorer does.
+// fetched and stored exactly where the popup stores them.
 async function refreshWith(balanceWei, tokenItems = []) {
     mockNode.balanceWei = balanceWei;
-    mockNode.tokenUnits =
-        tokenItems.length > 0 ? BigInt(tokenItems[0].value) : 0n;
     mockExplorer.items = tokenItems;
     state.wallets = [
         {
@@ -306,8 +294,7 @@ describe("Max on an ETH send", () => {
         openSend();
         await pressMax();
         await review();
-        expect(confirmed.amount).toBe(maxAfter(20n * GWEI));
-        expect(text("confirm-amount")).toBe("1.2341 ETH");
+        expect(text("confirm-amount")).toBe(maxAfter(20n * GWEI) + " ETH");
         expect(el("confirm-errors").innerHTML).toBe("");
         expect(el("confirm-amount-fee-error").style.visibility).toBe("hidden");
         expect(canSend()).toBe(true);
@@ -323,16 +310,14 @@ describe("Max on an ETH send", () => {
         // Kept, the Send screen's amount would be refused for want of funds.
         mockNode.feeData = fees(30n * GWEI);
         await review();
-        expect(confirmed.amount).toBe(maxAfter(30n * GWEI));
-        expect(text("confirm-amount")).toBe("1.2339 ETH");
+        expect(text("confirm-amount")).toBe(maxAfter(30n * GWEI) + " ETH");
         expect(canSend()).toBe(true);
 
         // And falls when the screen is shown again, as on reopening the popup.
         mockNode.feeData = fees(10n * GWEI);
         confirmTx.restore();
         await settle();
-        expect(confirmed.amount).toBe(maxAfter(10n * GWEI));
-        expect(text("confirm-amount")).toBe("1.2343 ETH");
+        expect(text("confirm-amount")).toBe(maxAfter(10n * GWEI) + " ETH");
         expect(canSend()).toBe(true);
     });
 
@@ -529,8 +514,7 @@ describe("Max on an ETH send", () => {
         el("send-amount").handlers.get("input")();
         mockNode.feeData = fees(30n * GWEI);
         await review();
-        expect(confirmed.amount).toBe("0.5");
-        expect(text("confirm-amount")).toBe("0.5000 ETH");
+        expect(text("confirm-amount")).toBe("0.5 ETH");
     });
 });
 
@@ -544,8 +528,7 @@ describe("Max on a token send", () => {
         await pressMax();
         expect(el("send-amount").value).toBe("1234.567890123456789012");
         await review();
-        expect(confirmed.amount).toBe("1234.567890123456789012");
-        expect(text("confirm-amount")).toBe("1234.5678 TOK");
+        expect(text("confirm-amount")).toBe("1234.567890123456789012 TOK");
         expect(canSend()).toBe(true);
     });
 
@@ -558,8 +541,7 @@ describe("Max on a token send", () => {
         await pressMax();
         expect(el("send-amount").value).toBe("1234.567890123456789012");
         await review();
-        expect(confirmed.amount).toBe("1234.567890123456789012");
-        expect(text("confirm-amount")).toBe("1234.5678 TOK");
+        expect(text("confirm-amount")).toBe("1234.567890123456789012 TOK");
         expect(canSend()).toBe(true);
     });
 

tests/stateRecovery.test.js

@@ -225,12 +225,7 @@ describe("a popup already open when the stored profile becomes unreadable", () =
                 viewData: {
                     pendingWait: {
                         hash: "0x1",
-                        txInfo: {
-                            to: ADDRESS,
-                            amount: "1",
-                            token: "ETH",
-                            chainId: "0x1",
-                        },
+                        txInfo: { to: ADDRESS, amount: "1", token: "ETH" },
                         broadcastTime: Date.now(),
                     },
                 },

tests/tokenTransferDetail.test.js

@@ -8,10 +8,6 @@
 // tracks. It decodes against the address the explorer reports the transaction
 // was sent to.
 //
-// Its links open the explorer of the network the transaction was sent on,
-// whichever network is active
-// (https://git.eeqj.de/sneak/AutistMask/issues/584).
-//
 // The row is the one the real history parser makes from the explorer's answer,
 // opened through transactionDetail.show(), which is what a click on the row
 // calls. Driven against a minimal DOM stub in the shape
@@ -39,7 +35,6 @@ globalThis.chrome = {
 };
 
 const { state } = require("../src/shared/state");
-const { NETWORKS } = require("../src/shared/networks");
 const { fetchRecentTransactions } = require("../src/shared/transactions");
 const transactionDetail = require("../src/popup/views/transactionDetail");
 
@@ -82,11 +77,7 @@ function mockExplorerAnswer(url) {
         };
     }
     if (url === EXPLORER + "/transactions/" + TX_HASH) {
-        return {
-            to: { hash: TOKEN },
-            raw_input: TRANSFER_DATA,
-            block_number: 100,
-        };
+        return { to: { hash: TOKEN }, raw_input: TRANSFER_DATA };
     }
     return { items: [] };
 }
@@ -163,11 +154,7 @@ beforeEach(() => {
 });
 
 test("a token transfer's decoded details name the token contract and the amount at its scale", async () => {
-    const [row] = await fetchRecentTransactions(
-        HOLDER,
-        EXPLORER,
-        NETWORKS.mainnet.chainId,
-    );
+    const [row] = await fetchRecentTransactions(HOLDER, EXPLORER, 1);
     expect(row.to).toBe(RECIPIENT);
     expect(row.contractAddress).toBe(TOKEN.toLowerCase());
 
@@ -187,33 +174,3 @@ test("a token transfer's decoded details name the token contract and the amount
         '<div class="font-bold">1234.5000 TDOL</div>',
     );
 });
-
-// Mainnet is active and the row was read from Sepolia's explorer. The stub
-// explorer answers whichever network asks, so every link on the screen is
-// drawn.
-test("with mainnet active, a Sepolia transaction's links open the Sepolia explorer", async () => {
-    state.networkId = "mainnet";
-    const [row] = await fetchRecentTransactions(
-        HOLDER,
-        EXPLORER,
-        NETWORKS.sepolia.chainId,
-    );
-
-    transactionDetail.show(row);
-    for (let i = 0; i < 10; i++) await new Promise((r) => setTimeout(r, 0));
-
-    const sepolia = "https://sepolia.etherscan.io";
-    const links = (id) =>
-        [...node(id).innerHTML.matchAll(/href="([^"]*)"/g)].map((m) => m[1]);
-    expect(links("tx-detail-hash")).toEqual([`${sepolia}/tx/${TX_HASH}`]);
-    expect(links("tx-detail-from")).toEqual([`${sepolia}/address/${HOLDER}`]);
-    expect(links("tx-detail-to")).toEqual([`${sepolia}/address/${RECIPIENT}`]);
-    expect(links("tx-detail-token-contract")).toEqual([
-        `${sepolia}/token/${TOKEN.toLowerCase()}`,
-    ]);
-    expect(links("tx-detail-block")).toEqual([`${sepolia}/block/100`]);
-    expect(links("tx-detail-calldata-details")).toEqual([
-        `${sepolia}/address/${TOKEN}`,
-        `${sepolia}/address/${RECIPIENT}`,
-    ]);
-});

tests/trackedTokensPerNetwork.test.js

@@ -1,372 +0,0 @@
-// Tracked tokens are kept per network, and the two add-token screens offer the
-// bundled token list, which holds Ethereum Mainnet contracts, on Ethereum
-// Mainnet only (https://git.eeqj.de/sneak/AutistMask/issues/523), including on
-// the screen "Back" lands on after a switch made from the Settings gear and for
-// a contract lookup that answers after one. Driven through the real popup over
-// a stored profile; the same switch made by the background is in
-// tests/coldWorkerChainSwitch.test.js.
-
-const {
-    bootPopup,
-    cleanupPopup,
-    unversionedValidProfile,
-    ADDRESS,
-    TOKEN_ADDRESS,
-} = require("./support/popupBoot");
-const { NETWORKS } = require("../src/shared/networks");
-
-const SEPOLIA_TOKEN = {
-    address: TOKEN_ADDRESS,
-    symbol: "TST",
-    decimals: 18,
-    name: "Test Token",
-};
-const MAINNET_TOKEN = {
-    address: "0x6B175474E89094C44Da98b954EedeAC495271d0F",
-    symbol: "DAI",
-    decimals: 18,
-    name: "Dai Stablecoin",
-};
-// Tracked on neither network.
-const NEW_TOKEN_ADDRESS = "0xBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB";
-const NETWORK_CHANGED_FLASH =
-    "The active network changed before the lookup finished, so the token was" +
-    " not added.";
-
-afterEach(() => {
-    cleanupPopup();
-});
-
-// The popup reopened onto SettingsAddToken, on `networkId`.
-function bootOnAddToken(networkId, extra) {
-    return bootPopup(
-        unversionedValidProfile({
-            networkId,
-            currentView: "settings-addtoken",
-            ...extra,
-        }),
-    );
-}
-
-// The popup reopened onto AddressDetail on Ethereum Mainnet, with DAI tracked
-// there and TST tracked on Sepolia.
-function bootOnAddress() {
-    return bootPopup(
-        unversionedValidProfile({
-            currentView: "address",
-            selectedWallet: 0,
-            selectedAddress: 0,
-            trackedTokens: [MAINNET_TOKEN],
-            networkTrackedTokens: { sepolia: [SEPOLIA_TOKEN] },
-        }),
-    );
-}
-
-// The popup reopened onto AddressToken for `token`, with AddressDetail beneath
-// it, over the same tracked tokens as bootOnAddress().
-function bootOnToken(token) {
-    return bootPopup(
-        unversionedValidProfile({
-            currentView: "address-token",
-            viewStack: ["main", "address"],
-            selectedWallet: 0,
-            selectedAddress: 0,
-            selectedToken: token,
-            trackedTokens: [MAINNET_TOKEN],
-            networkTrackedTokens: { sepolia: [SEPOLIA_TOKEN] },
-        }),
-    );
-}
-
-// AddressToken for `token` opened from AddressDetail, as tapping the token's
-// row there does.
-async function openToken(boot, token) {
-    const { state } = require("../src/shared/state");
-    state.selectedToken = token;
-    require("../src/popup/views/helpers").pushCurrentView();
-    require("../src/popup/views/addressToken").show();
-    await boot.settle();
-}
-
-// Presses `addButton` with a contract lookup that answers only after the
-// Settings gear and a switch to `networkId`.
-async function addAcrossSwitch(boot, addButton, networkId) {
-    const { lookupTokenInfo } = require("../src/shared/balances");
-    let answer;
-    lookupTokenInfo.mockImplementationOnce(
-        () =>
-            new Promise((resolve) => {
-                answer = resolve;
-            }),
-    );
-    const adding = boot.click(addButton);
-    await boot.click("btn-settings");
-    await chooseNetwork(boot, networkId);
-    answer({ symbol: "NEW", decimals: 18, name: "New Token" });
-    await adding;
-}
-
-// Picks `networkId` in the Settings network selector, as the user does.
-async function chooseNetwork(boot, networkId) {
-    const select = boot.node("settings-network");
-    select.value = networkId;
-    for (const fn of select.listeners.change) await fn();
-    await boot.settle();
-}
-
-// The Settings gear, a switch to Sepolia, and Back.
-async function gearSwitchBack(boot) {
-    await boot.click("btn-settings");
-    expect(boot.visibleViews()).toEqual(["settings"]);
-    await chooseNetwork(boot, "sepolia");
-    await boot.click("btn-settings-back");
-}
-
-describe.each([
-    ["mainnet", false],
-    ["sepolia", true],
-])("on %s", (networkId, hidden) => {
-    test(`the common tokens are hidden: ${hidden}`, async () => {
-        const boot = await bootOnAddToken(networkId);
-        expect(boot.pageErrors).toEqual([]);
-        expect(boot.visibleViews()).toEqual(["settings-addtoken"]);
-        expect(boot.hidden("settings-addtoken-common")).toBe(hidden);
-
-        require("../src/popup/views/addToken").show();
-        expect(boot.visibleViews()).toEqual(["add-token"]);
-        expect(boot.hidden("add-token-common")).toBe(hidden);
-    });
-});
-
-test("a token added by contract address on Sepolia is tracked on Sepolia only", async () => {
-    const boot = await bootOnAddToken("sepolia", {
-        networkTrackedTokens: { mainnet: [MAINNET_TOKEN] },
-    });
-    const stored = () => boot.storage.read("autistmask");
-    const { lookupTokenInfo } = require("../src/shared/balances");
-    lookupTokenInfo.mockResolvedValueOnce({
-        symbol: SEPOLIA_TOKEN.symbol,
-        decimals: SEPOLIA_TOKEN.decimals,
-        name: SEPOLIA_TOKEN.name,
-    });
-
-    boot.node("settings-addtoken-address").value = TOKEN_ADDRESS;
-    await boot.click("btn-settings-addtoken-manual");
-
-    expect(lookupTokenInfo).toHaveBeenCalledWith(
-        TOKEN_ADDRESS,
-        expect.any(String),
-        "sepolia",
-        expect.anything(),
-    );
-    expect(stored().trackedTokens).toEqual([SEPOLIA_TOKEN]);
-
-    await chooseNetwork(boot, "mainnet");
-    expect(stored().networkId).toBe("mainnet");
-    expect(stored().trackedTokens).toEqual([MAINNET_TOKEN]);
-    const onMainnet = boot.node("settings-tracked-tokens").innerHTML;
-    expect(onMainnet).toContain("DAI");
-    expect(onMainnet).not.toContain("TST");
-
-    await chooseNetwork(boot, "sepolia");
-    expect(stored().networkId).toBe("sepolia");
-    expect(stored().trackedTokens).toEqual([SEPOLIA_TOKEN]);
-    const onSepolia = boot.node("settings-tracked-tokens").innerHTML;
-    expect(onSepolia).toContain("TST");
-    expect(onSepolia).not.toContain("DAI");
-});
-
-describe("Back after a switch from the Settings gear", () => {
-    test("SettingsAddToken no longer offers the common tokens", async () => {
-        const boot = await bootOnAddToken("mainnet");
-        expect(boot.hidden("settings-addtoken-common")).toBe(false);
-
-        await gearSwitchBack(boot);
-        expect(boot.visibleViews()).toEqual(["settings-addtoken"]);
-        expect(boot.hidden("settings-addtoken-common")).toBe(true);
-    });
-
-    test("AddressDetail lists the new network's tracked tokens", async () => {
-        const boot = await bootOnAddress();
-        expect(boot.node("address-balances").innerHTML).toContain("DAI");
-
-        await gearSwitchBack(boot);
-        expect(boot.visibleViews()).toEqual(["address"]);
-        const balances = boot.node("address-balances").innerHTML;
-        expect(balances).toContain("TST");
-        expect(balances).not.toContain("DAI");
-    });
-
-    // Neither can be rendered from saved state, so neither is landed on.
-    test.each([
-        ["btn-add-token", "add-token"],
-        ["btn-send", "send"],
-    ])("from over %s, it lands on AddressDetail", async (button, view) => {
-        const boot = await bootOnAddress();
-        await boot.click(button);
-        expect(boot.visibleViews()).toEqual([view]);
-
-        await gearSwitchBack(boot);
-        expect(boot.visibleViews()).toEqual(["address"]);
-        expect(boot.node("address-balances").innerHTML).not.toContain("DAI");
-    });
-
-    // DAI was picked on Ethereum Mainnet, where alone it is tracked.
-    test.each([
-        [
-            "opened from AddressDetail",
-            async () => {
-                const boot = await bootOnAddress();
-                await openToken(boot, MAINNET_TOKEN.address);
-                return boot;
-            },
-        ],
-        ["in a reopened popup", () => bootOnToken(MAINNET_TOKEN.address)],
-    ])(
-        "from AddressToken for DAI %s, it lands on AddressDetail",
-        async (_how, open) => {
-            const boot = await open();
-            expect(boot.visibleViews()).toEqual(["address-token"]);
-            expect(boot.text("address-token-title")).toContain("DAI");
-
-            await gearSwitchBack(boot);
-            expect(boot.visibleViews()).toEqual(["address"]);
-            const balances = boot.node("address-balances").innerHTML;
-            expect(balances).toContain("TST");
-            expect(balances).not.toContain("DAI");
-        },
-    );
-
-    // The stack is saved cut with the switch, so a popup closed straight after
-    // it and reopened onto Settings lands where this one would. Loading a
-    // saved stack cuts it at AddToken and Send as well, but not at
-    // AddressToken.
-    test.each([
-        [
-            "AddressToken for DAI",
-            (boot) => openToken(boot, MAINNET_TOKEN.address),
-        ],
-        ["AddToken", (boot) => boot.click("btn-add-token")],
-        ["Send", (boot) => boot.click("btn-send")],
-    ])(
-        "from %s, a popup reopened after the switch lands on AddressDetail",
-        async (_view, open) => {
-            const boot = await bootOnAddress();
-            await open(boot);
-            await boot.click("btn-settings");
-            await chooseNetwork(boot, "sepolia");
-
-            const reopened = await bootPopup(boot.storage.read("autistmask"));
-            expect(reopened.visibleViews()).toEqual(["settings"]);
-            await reopened.click("btn-settings-back");
-            expect(reopened.visibleViews()).toEqual(["address"]);
-            const balances = reopened.node("address-balances").innerHTML;
-            expect(balances).toContain("TST");
-            expect(balances).not.toContain("DAI");
-        },
-    );
-
-    test("AddressToken for the native token is drawn again for the new network", async () => {
-        const boot = await bootOnToken("ETH");
-        expect(boot.visibleViews()).toEqual(["address-token"]);
-
-        await gearSwitchBack(boot);
-        expect(boot.visibleViews()).toEqual(["address-token"]);
-        expect(boot.text("address-token-title")).toContain("SepoliaETH");
-    });
-
-    // A popup reopened onto ConfirmTx has no Send beneath it, so "Back" draws
-    // ConfirmTx again from the saved transaction. It is drawn for the network
-    // the transaction was reviewed on, and Sign & Send refuses it on the new
-    // one.
-    test("ConfirmTx reviewed on Sepolia is not sent on Ethereum Mainnet", async () => {
-        const boot = await bootPopup(
-            unversionedValidProfile({
-                networkId: "sepolia",
-                currentView: "confirm-tx",
-                selectedWallet: 0,
-                selectedAddress: 0,
-                viewData: {
-                    pendingTx: {
-                        token: "ETH",
-                        from: ADDRESS,
-                        to: ADDRESS,
-                        amount: "1",
-                        chainId: NETWORKS.sepolia.chainId,
-                    },
-                },
-            }),
-        );
-        expect(boot.visibleViews()).toEqual(["confirm-tx"]);
-
-        await boot.click("btn-settings");
-        await chooseNetwork(boot, "mainnet");
-        globalThis.fetch.mockClear();
-        await boot.click("btn-settings-back");
-        expect(boot.visibleViews()).toEqual(["confirm-tx"]);
-        // Drawn again: its Etherscan label check asks Sepolia's explorer.
-        expect(globalThis.fetch.mock.calls.map((call) => call[0])).toEqual([
-            NETWORKS.sepolia.explorerUrl + "/address/" + ADDRESS,
-        ]);
-        expect(boot.text("confirm-type")).toBe("Native SepoliaETH transfer");
-
-        boot.node("confirm-tx-password").value = "any password";
-        await boot.click("btn-confirm-send");
-        expect(boot.visibleViews()).toEqual(["confirm-tx"]);
-        expect(
-            boot.node("confirm-network-changed-error").style.visibility,
-        ).toBe("visible");
-        // Refused before the password is even tried.
-        expect(boot.text("confirm-tx-password-error")).toBe("");
-    });
-
-    test("without a wallet, it lands on Welcome", async () => {
-        const boot = await bootPopup(undefined);
-        expect(boot.visibleViews()).toEqual(["welcome"]);
-
-        await gearSwitchBack(boot);
-        expect(boot.visibleViews()).toEqual(["welcome"]);
-    });
-
-    test("a later Back onto Settings keeps what was typed there", async () => {
-        const boot = await bootOnAddress();
-        await boot.click("btn-settings");
-        await chooseNetwork(boot, "sepolia");
-        boot.node("settings-rpc").value = "https://typed.example";
-
-        await boot.click("btn-settings-add-token");
-        expect(boot.visibleViews()).toEqual(["settings-addtoken"]);
-        await boot.click("btn-settings-addtoken-back");
-        expect(boot.visibleViews()).toEqual(["settings"]);
-        expect(boot.value("settings-rpc")).toBe("https://typed.example");
-    });
-});
-
-describe("a contract lookup that answers after a switch adds nothing", () => {
-    test("from SettingsAddToken", async () => {
-        const boot = await bootOnAddToken("sepolia", {
-            networkTrackedTokens: { mainnet: [MAINNET_TOKEN] },
-        });
-        const stored = () => boot.storage.read("autistmask");
-        boot.node("settings-addtoken-address").value = NEW_TOKEN_ADDRESS;
-
-        await addAcrossSwitch(boot, "btn-settings-addtoken-manual", "mainnet");
-        expect(boot.visibleViews()).toEqual(["settings"]);
-        expect(boot.text("flash-msg")).toBe(NETWORK_CHANGED_FLASH);
-        expect(stored().trackedTokens).toEqual([MAINNET_TOKEN]);
-        expect(stored().networkTrackedTokens.sepolia).toEqual([]);
-    });
-
-    test("from AddToken", async () => {
-        const boot = await bootOnAddress();
-        const stored = () => boot.storage.read("autistmask");
-        await boot.click("btn-add-token");
-        boot.node("add-token-address").value = NEW_TOKEN_ADDRESS;
-
-        await addAcrossSwitch(boot, "btn-add-token-confirm", "sepolia");
-        expect(boot.visibleViews()).toEqual(["settings"]);
-        expect(boot.text("flash-msg")).toBe(NETWORK_CHANGED_FLASH);
-        expect(stored().trackedTokens).toEqual([SEPOLIA_TOKEN]);
-        expect(stored().networkTrackedTokens.mainnet).toEqual([MAINNET_TOKEN]);
-    });
-});

tests/txStatus.test.js

@@ -29,13 +29,8 @@ jest.mock("../src/shared/log", () => ({
 }));
 
 const mockReceiptLookup = jest.fn();
-// The RPC URL and network of every node a wait was given.
-const mockNodes = [];
 jest.mock("../src/shared/balances", () => ({
-    getProvider: (rpcUrl, networkId) => {
-        mockNodes.push({ rpcUrl, networkId });
-        return { getTransactionReceipt: mockReceiptLookup };
-    },
+    getProvider: () => ({ getTransactionReceipt: mockReceiptLookup }),
     refreshBalances: jest.fn(),
 }));
 
@@ -112,7 +107,6 @@ global.chrome = { storage };
 
 const txStatus = require("../src/popup/views/txStatus");
 const { state } = require("../src/shared/state");
-const { NETWORKS } = require("../src/shared/networks");
 const { RESTORABLE_VIEWS } = require("../src/shared/restorableViews");
 const { log } = require("../src/shared/log");
 
@@ -124,7 +118,6 @@ const TX_INFO = {
     amount: "0.0050",
     token: "ETH",
     tokenSymbol: null,
-    chainId: NETWORKS.mainnet.chainId,
 };
 
 // True when a view element is not hidden.
@@ -144,11 +137,7 @@ beforeEach(() => {
     jest.setSystemTime(new Date("2026-08-11T12:00:00Z"));
     elements.clear();
     mockReceiptLookup.mockReset();
-    mockNodes.length = 0;
     log.errorf.mockClear();
-    state.networkId = "mainnet";
-    state.rpcUrl = NETWORKS.mainnet.defaultRpcUrl;
-    state.networkEndpoints = {};
     state.wallets = [];
     state.viewData = {};
     state.viewStack = [];
@@ -360,14 +349,14 @@ describe("WaitTx persistence across popup close", () => {
             // out of restoreView().
             {
                 hash: TX_HASH,
-                txInfo: { ...TX_INFO, to: 42 },
+                txInfo: { to: 42, amount: "0.0050" },
                 broadcastTime: Date.now(),
             },
             // Otherwise complete but an array: only Array.isArray() rejects
             // it, since typeof [] is "object" and the fields are present.
             {
                 hash: TX_HASH,
-                txInfo: Object.assign([], TX_INFO),
+                txInfo: Object.assign([], { to: RECIPIENT, amount: "0.0050" }),
                 broadcastTime: Date.now(),
             },
             {
@@ -375,18 +364,6 @@ describe("WaitTx persistence across popup close", () => {
                 txInfo: { to: RECIPIENT },
                 broadcastTime: Date.now(),
             },
-            // Otherwise complete but for a chain id naming no network: there
-            // is no node to ask for the receipt, and no explorer to link to.
-            {
-                hash: TX_HASH,
-                txInfo: { ...TX_INFO, chainId: undefined },
-                broadcastTime: Date.now(),
-            },
-            {
-                hash: TX_HASH,
-                txInfo: { ...TX_INFO, chainId: "0x5" },
-                broadcastTime: Date.now(),
-            },
         ]) {
             state.viewData = { pendingWait: bad };
             expect(txStatus.restoreWait()).toBe(false);
@@ -522,50 +499,6 @@ describe("WaitTx when the popup closes", () => {
     });
 });
 
-// The popup can reopen onto WaitTx after Settings switched the network. The
-// wait asked the active network's node for the receipt, never found it, and
-// reported a timeout, and its links went to the active network's explorer
-// (https://git.eeqj.de/sneak/AutistMask/issues/584).
-describe("WaitTx for a Sepolia transaction with mainnet active", () => {
-    const SEPOLIA_NODE = "https://sepolia.node.example.invalid";
-    const sepoliaTx = { ...TX_INFO, chainId: NETWORKS.sepolia.chainId };
-
-    beforeEach(() => {
-        state.rpcUrl = "https://mainnet.node.example.invalid";
-        state.networkEndpoints = { sepolia: { rpcUrl: SEPOLIA_NODE } };
-    });
-
-    test("the receipt is asked of the Sepolia node Settings has", async () => {
-        mockReceiptLookup.mockResolvedValue({ blockNumber: 21000000 });
-        state.viewData = {
-            pendingWait: {
-                txInfo: sepoliaTx,
-                hash: TX_HASH,
-                broadcastTime: Date.now(),
-            },
-        };
-        expect(txStatus.restoreWait()).toBe(true);
-        await jest.advanceTimersByTimeAsync(0);
-
-        expect(mockNodes).toEqual([
-            { rpcUrl: SEPOLIA_NODE, networkId: "sepolia" },
-        ]);
-        expect(state.currentView).toBe("success-tx");
-    });
-
-    test("the recipient and hash link to the Sepolia explorer", () => {
-        mockReceiptLookup.mockResolvedValue(null);
-        txStatus.showWait(sepoliaTx, TX_HASH);
-
-        expect(getElement("wait-tx-to").innerHTML).toContain(
-            `href="https://sepolia.etherscan.io/address/${RECIPIENT}"`,
-        );
-        expect(getElement("wait-tx-hash").innerHTML).toContain(
-            `href="https://sepolia.etherscan.io/tx/${TX_HASH}"`,
-        );
-    });
-});
-
 describe("wait-tx is a view the popup may reopen onto", () => {
     // The resume feature is wired through RESTORABLE_VIEWS: restoreView()
     // refuses any view not in the set, so dropping "wait-tx" from it kills

tests/uniswap.test.js

@@ -14,25 +14,27 @@ const DAI_ADDR = "0x6B175474E89094C44Da98b954EedeAC495271d0F";
 const SEPOLIA_WETH_ADDR = "0xfFf9976782d46CC05630D1f6eBAb18b2324d6B14";
 const USER_ADDR = "0x66133E8ea0f5D1d612D2502a968757D1048c214a";
 
-// AutistMask's first-ever swap, 2026-02-27, sent from USER_ADDR.
+// AutistMask's first-ever swap, 2026-02-27.
 // Swapped USDT for ETH via Uniswap V4 Universal Router.
 // https://etherscan.io/tx/0x6749f50c4e8f975b6d14780d5f539cf151d1594796ac49b7d6a5348ba0735e77
-// This is that transaction's input, as a public Ethereum node returns it.
 const FIRST_SWAP_CALLDATA =
     "0x3593564c" +
-    "000000000000000000000000000000000000000000000000000000000000006000000000000000000000000000000000000000000000000000000000000000a00000000000000000000000000000000000000000000000000000000069a1550f0000000000000000000000000000000000000000000000000000000000000002" +
-    "0a100000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000002000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000000000000000000000000000000001c0" +
-    "0000000000000000000000000000000000000000000000000000000000000160000000000000000000000000dac17f958d2ee523a2206206994597c13d831ec7000000000000000000000000ffffffffffffffffffffffffffffffffffffffff0000000000000000000000000000000000000000000000000000000069c8daf6" +
-    "000000000000000000000000000000000000000000000000000000000000000000000000000000000000000066a9893cc07d91d95644aedd05d03f95e1dba8af0000000000000000000000000000000000000000000000000000000069a154fe00000000000000000000000000000000000000000000000000000000000000e0" +
-    "0000000000000000000000000000000000000000000000000000000000000041230249bb7133205db7b2389b587c723cc182302907b9545dc40c59c33ad1d53078a65732f4182fedbc0d9d85c51d580bdc93db3556fac38f18e140da47d0eb631c00000000000000000000000000000000000000000000000000000000000000" +
+    "000000000000000000000000000000000000000000000000000000000000006000000000000000000000000000000000000000000000000000000000000000a0" +
+    "0000000000000000000000000000000000000000000000000000000069a1550f00000000000000000000000000000000000000000000000000000000000000020a10000000000000000000000000000000000000000000000000000000000000" +
+    "0000000000000000000000000000000000000000000000000000000000000002000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000000000000000000000000000000001c0" +
+    "0000000000000000000000000000000000000000000000000000000000000160000000000000000000000000dac17f958d2ee523a2206206994597c13d831ec7000000000000000000000000ffffffffffffffffffffffffffffffffffffffff" +
+    "0000000000000000000000000000000000000000000000000000000069c8daf6000000000000000000000000000000000000000000000000000000000000000000000000000000000000000066a9893cc07d91d95644aedd05d03f95e1dba8af" +
+    "0000000000000000000000000000000000000000000000000000000069a154fe00000000000000000000000000000000000000000000000000000000000000e00000000000000000000000000000000000000000000000000000000000000041" +
+    "230249bb7133205db7b2389b587c723cc182302907b9545dc40c59c33ad1d53078a65732f4182fedbc0d9d85c51d580bdc93db3556fac38f18e140da47d0eb631c00000000000000000000000000000000000000000000000000000000000000" +
     "00000000000000000000000000000000000000000000000000000000000003c0000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000000000000000000000000000000000800000000000000000000000000000000000000000000000000000000000000003" +
     "070b0e0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000300000000000000000000000000000000000000000000000000000000000000600000000000000000000000000000000000000000000000000000000000000220" +
     "00000000000000000000000000000000000000000000000000000000000002a000000000000000000000000000000000000000000000000000000000000001a00000000000000000000000000000000000000000000000000000000000000020000000000000000000000000dac17f958d2ee523a2206206994597c13d831ec7" +
-    "0000000000000000000000000000000000000000000000000000000000000080000000000000000000000000000000000000000000000000000000000007a1200000000000000000000000000000000000000000000000000000dcb050d338e70000000000000000000000000000000000000000000000000000000000000001" +
-    "0000000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000640000000000000000000000000000000000000000000000000000000000000001" +
-    "000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000a000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000060" +
-    "000000000000000000000000dac17f958d2ee523a2206206994597c13d831ec7000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000010000000000000000000000000000000000000000000000000000000000000060" +
-    "000000000000000000000000000000000000000000000000000000000000000000000000000000000000000066133e8ea0f5d1d612d2502a968757d1048c214a0000000000000000000000000000000000000000000000000000000000000000756e6978000000000012";
+    "0000000000000000000000000000000000000000000000000000000000000080000000000000000000000000000000000000000000000000000000000007a1200000000000000000000000000000000000000000000000000000dcb050d338e7" +
+    "0000000000000000000000000000000000000000000000000000000000000001000000000000000000000000000000000000000000000000000000000000002000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000064" +
+    "0000000000000000000000000000000000000000000000000000000000000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000a0" +
+    "0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000006000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" +
+    "dac17f958d2ee523a2206206994597c13d831ec70000000000000000000000000000000000000000000000000000000000000000000000000000000000000001000000000000000000000000000000000000000000000000000000000000006000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" +
+    "66133e8ea0f5d1d612d2502a968757d1048c214a0000000000000000000000000000000000000000000000000000000000000000756e6978000000000012";
 
 const coder = AbiCoder.defaultAbiCoder();
 const routerIface = new Interface([
@@ -360,11 +362,11 @@ describe("uniswap decoder", () => {
         expect(result.details.find((d) => d.label === "Amount").value).toBe(
             "Unlimited",
         );
-        // Its TAKE pays the From address, so the minimum is received.
+        // This fixture's TAKE parameters are one byte long, so who it pays
+        // cannot be read, and the minimum is not said to be received.
         expect(
-            result.details.find((d) => d.label === "Min. received").value,
+            result.details.find((d) => d.label === "Min. paid out").value,
         ).toBe("0.0002 ETH");
-        expect(labels).not.toContain("Paid to");
 
         // Real mainnet calldata is in the deployed shape, so its V4 step is
         // not said to be undecoded.
@@ -739,9 +741,7 @@ describe("uniswap decoder", () => {
     });
 
     // Paid in ETH, with an exact-out step, the last swap step buys WETH, so
-    // UNWRAP_WETH makes the output ETH. That step is paid by the user, so the
-    // USDC the exact-out step bought stays in the router, and the minimum is
-    // not received (https://git.eeqj.de/sneak/AutistMask/issues/606).
+    // UNWRAP_WETH makes the output ETH.
     test("an ETH-paid swap whose last step buys WETH, then UNWRAP_WETH, shows ETH", () => {
         const data = buildExecute(
             solidityPacked(
@@ -769,7 +769,7 @@ describe("uniswap decoder", () => {
 
         const result = uniswap.decode(data, ROUTER_ADDR, "0x1", {}, USER_ADDR);
         expect(detail(result, "Token Out").value).toBe("ETH");
-        expect(detail(result, "Min. paid out").value).toBe("0.4000 ETH");
+        expect(detail(result, "Min. received").value).toBe("0.4000 ETH");
     });
 
     // Sepolia's WETH is a different contract; UNWRAP_WETH makes it ETH too.
@@ -956,28 +956,7 @@ describe("uniswap decoder", () => {
             router: "UniversalRouterV2_1_2",
             address: ROUTER_V2_1_2_ADDR,
             command: "0x40",
-            steps: "Across Bridge Deposit",
-        },
-        // Only the routers with the 0x7f mask have 0x07, as
-        // PAY_PORTION_FULL_PRECISION; the others revert on it
-        // (https://git.eeqj.de/sneak/AutistMask/issues/599).
-        {
-            router: "UniversalRouterV1",
-            address: ROUTER_V1_ADDR,
-            command: "0x07",
-            steps: "Command 0x07",
-        },
-        {
-            router: "UniversalRouterV2",
-            address: ROUTER_ADDR,
-            command: "0x07",
-            steps: "Command 0x07",
-        },
-        {
-            router: "UniversalRouterV2_1_2",
-            address: ROUTER_V2_1_2_ADDR,
-            command: "0x07",
-            steps: "Pay Portion (Full Precision)",
+            steps: "Command 0x40",
         },
     ])(
         "command $command sent to $router is listed as $steps",
@@ -989,23 +968,13 @@ describe("uniswap decoder", () => {
     );
 
     // A sub-plan holding a V3 swap of USDT for WETH, which the decoder does
-    // not read. With the allow-revert flag (0x80) the command byte is 0xa1,
-    // and the router lets the step fail
-    // (https://git.eeqj.de/sneak/AutistMask/issues/602).
+    // not read. With the allow-revert flag (0x80) the command byte is 0xa1.
     test.each([
-        {
-            flag: "without",
-            command: 0x21,
-            steps: "Execute Sub-Plan (its steps are not shown)",
-        },
-        {
-            flag: "with",
-            command: 0xa1,
-            steps: "Execute Sub-Plan (its steps are not shown) (allowed to fail)",
-        },
+        { flag: "without", command: 0x21 },
+        { flag: "with", command: 0xa1 },
     ])(
         "an EXECUTE_SUB_PLAN step $flag the allow-revert flag says its steps are not shown",
-        ({ command, steps }) => {
+        ({ command }) => {
             const subPlan = encodeSubPlan("0x00", [
                 encodeV3SwapExactIn(USER_ADDR, 2000000n, ONE_WETH, [
                     USDT_ADDR,
@@ -1025,7 +994,9 @@ describe("uniswap decoder", () => {
                 USER_ADDR,
             );
             expect(result.name).toBe("Uniswap Swap");
-            expect(detail(result, "Steps").value).toBe(steps);
+            expect(detail(result, "Steps").value).toBe(
+                "Execute Sub-Plan (its steps are not shown)",
+            );
             // The sub-plan names both currencies, so the lines must not say
             // the calldata did not.
             expect(detail(result, "Token In").value).toBe(

tests/uniswapUndeterminedTokenIn.test.js

@@ -71,8 +71,6 @@ function exactInParams(currencyIn, path, amountIn, amountOutMin) {
 
 // BALANCE_CHECK_ERC20 (command 0x0e): (address owner, address token,
 // uint256 minBalance). It names the output token and nothing about the input.
-// Its owner is USER, the transaction's sender: a check of any other address
-// names no output token.
 function balanceCheck(token, minBalance) {
     return coder.encode(
         ["address", "address", "uint256"],
@@ -80,13 +78,8 @@ function balanceCheck(token, minBalance) {
     );
 }
 
-// A transaction from USER.
-function decode(data) {
-    return uniswap.decode(data, ROUTER, "0x1", {}, USER);
-}
-
 function detail(data, label) {
-    const decoded = decode(data);
+    const decoded = uniswap.decode(data, ROUTER, "0x1", {});
     expect(decoded).not.toBeNull();
     return decoded.details.find((d) => d.label === label);
 }
@@ -120,7 +113,9 @@ describe("an execute() whose input currency never decoded", () => {
     });
 
     test("does not name ETH in the swap title either", () => {
-        expect(decode(data()).name).toBe("Uniswap Swap");
+        expect(uniswap.decode(data(), ROUTER, "0x1", {}).name).toBe(
+            "Uniswap Swap",
+        );
     });
 });
 
@@ -130,7 +125,9 @@ describe("an execute() that names only an output token", () => {
 
     test("refuses the input rather than defaulting it to ETH", () => {
         expect(detail(data(), "Token In").value).toBe(REFUSAL);
-        expect(decode(data()).name).toBe("Uniswap Swap");
+        expect(uniswap.decode(data(), ROUTER, "0x1", {}).name).toBe(
+            "Uniswap Swap",
+        );
     });
 
     test("still states the output it did establish", () => {
@@ -178,7 +175,9 @@ describe("native ETH in, which V4 spells as the zero address", () => {
 
         expect(detail(data, "Token In").value).toBe("ETH (native)");
         expect(detail(data, "Amount").value).toBe("1.0000 ETH");
-        expect(decode(data).name).toBe("Swap ETH → USDT");
+        expect(uniswap.decode(data, ROUTER, "0x1", {}).name).toBe(
+            "Swap ETH → USDT",
+        );
     });
 
     test("WRAP_ETH is still ETH at 18 decimals", () => {

tests/unknownScaleSend.test.js

@@ -39,8 +39,7 @@ jest.mock("../src/shared/log", () => ({
 
 // Everything the confirmation screen would reach the network for. The gas
 // estimate is the point: with a usable scale it must succeed, so that a failure
-// in these tests is a failure of the scale and not of the stub. The address
-// holds the 1 ETH the wallets below record, and `tokenUnits` of the token.
+// in these tests is a failure of the scale and not of the stub.
 const mockProvider = {
     getFeeData: async () => ({
         maxFeePerGas: 2000000000n,
@@ -49,14 +48,7 @@ const mockProvider = {
     estimateGas: async () => 21000n,
     getCode: async () => "0x",
     getTransactionCount: async () => 1,
-    getBalance: async () => 1000000000000000000n,
-    tokenUnits: 0n,
-    // The one contract call the screen makes, balanceOf().
-    call: async () =>
-        AbiCoder.defaultAbiCoder().encode(
-            ["uint256"],
-            [mockProvider.tokenUnits],
-        ),
+    getBalance: async () => 0n,
 };
 
 jest.mock("../src/shared/balances", () => {
@@ -122,7 +114,7 @@ global.document = {
 };
 global.navigator = { clipboard: { writeText() {} } };
 
-const { AbiCoder, parseUnits } = require("ethers");
+const { parseUnits } = require("ethers");
 const { fetchTokenBalances } = require("../src/shared/balances");
 const { debugFetch } = require("../src/shared/log");
 const { state } = require("../src/shared/state");
@@ -163,9 +155,8 @@ function row(token = {}, value = FIVE_WETH) {
 }
 
 // Fetch the explorer's rows through the real fetcher and put them exactly where
-// refreshBalances() puts them. The node reports the holding the explorer does.
+// refreshBalances() puts them.
 async function fetchOnto(items) {
-    mockProvider.tokenUnits = BigInt(items[0].value);
     debugFetch.mockImplementation(async () => ({
         ok: true,
         status: 200,
@@ -190,7 +181,6 @@ async function fetchOnto(items) {
 // is from the first. Two addresses is what it takes to reach
 // explorerDecimals()'s disagreement check, which is only reachable across rows.
 async function fetchOntoBoth(itemsA, itemsB) {
-    mockProvider.tokenUnits = BigInt(itemsA[0].value);
     debugFetch.mockImplementation(async () => ({
         ok: true,
         status: 200,
@@ -249,12 +239,6 @@ function errors() {
     return el("confirm-errors").innerHTML;
 }
 
-// The message for an amount the balance does not cover, while it is shown.
-function balanceError() {
-    const box = el("confirm-balance-error");
-    return box.style.visibility === "visible" ? box.textContent : "";
-}
-
 function sendDisabled() {
     return el("btn-confirm-send").disabled;
 }
@@ -286,6 +270,7 @@ describe("the Send screen resolves the scale rather than reading the stored one"
         const txInfo = await reviewSend(WETH, "1.5");
         expect(txInfo.tokenDecimals).toBe(18);
         expect(txInfo.tokenDecimals).not.toBe(balances[0].decimals);
+        expect(txInfo.tokenBalance).toBe("5.0");
     });
 
     test("that scale estimates a fee and leaves Send enabled", async () => {
@@ -322,10 +307,11 @@ describe("the Send screen resolves the scale rather than reading the stored one"
         // No fallback was introduced: resolution answers null here, and the
         // null is what goes forward.
         expect(txInfo.tokenDecimals).toBeNull();
+        expect(txInfo.tokenBalance).toBeNull();
         confirmTx.show(txInfo);
         await settle();
         expect(text("confirm-balance")).toBe("unknown (NOVEL)");
-        expect(balanceError()).toContain("This token's balance is unknown");
+        expect(errors()).toContain("This token's balance is unknown");
         expect(sendDisabled()).toBe(true);
     });
 });
@@ -369,8 +355,7 @@ describe("a scale the explorer's own rows disagree about", () => {
         const txInfo = await reviewSend(NOVEL, "1.5");
         expect(txInfo.tokenDecimals).toBeNull();
         // The regression this closes: null scale alongside a non-null balance.
-        send.updateSendBalance();
-        expect(text("send-balance")).toBe("Current balance: unknown (NOVEL)");
+        expect(txInfo.tokenBalance).toBeNull();
     });
 
     test("so the user is told the balance is unknown, not only that the fee failed", async () => {
@@ -382,7 +367,8 @@ describe("a scale the explorer's own rows disagree about", () => {
         // confirm-fee-unknown-error — "the network fee could not be
         // estimated... please go back and try again" — as the only explanation
         // for a screen that can never proceed.
-        expect(balanceError()).toContain("This token's balance is unknown");
+        expect(errors()).not.toBe("");
+        expect(errors()).toContain("This token's balance is unknown");
         expect(text("confirm-balance")).toBe("unknown (NOVEL)");
         expect(sendDisabled()).toBe(true);
         // The fee line still reports the estimate as unavailable, because it
@@ -448,20 +434,31 @@ describe("a scale the explorer's own rows disagree about", () => {
         expect(text("send-balance")).toBe("Current balance: 5.0000 NOVEL");
         const txInfo = await reviewSend(NOVEL, "1.5");
         expect(txInfo.tokenDecimals).toBe(6);
+        expect(txInfo.tokenBalance).toBe("5.0");
         confirmTx.show(txInfo);
         await settle();
         expect(text("confirm-balance")).toBe("5.0000 NOVEL");
         expect(errors()).toBe("");
-        expect(balanceError()).toBe("");
         expect(sendDisabled()).toBe(false);
     });
 });
 
 describe("the confirmation screen tells an unknown balance from a zero one", () => {
-    // A send of 1.5 NOVEL from an address the node reports none of, with the
-    // token's scale `tokenDecimals`, or null for a scale nobody knows.
-    async function render(tokenDecimals) {
-        mockProvider.tokenUnits = 0n;
+    function txInfo(tokenBalance) {
+        return {
+            from: HOLDER,
+            to: RECIPIENT,
+            ensName: null,
+            amount: "1.5",
+            token: NOVEL,
+            balance: "1.0",
+            tokenSymbol: "NOVEL",
+            tokenBalance,
+            tokenDecimals: tokenBalance === null ? null : 18,
+        };
+    }
+
+    async function render(tokenBalance) {
         state.wallets = [
             {
                 name: "Wallet 1",
@@ -472,40 +469,30 @@ describe("the confirmation screen tells an unknown balance from a zero one", ()
         ];
         state.selectedWallet = 0;
         state.selectedAddress = 0;
-        confirmTx.show({
-            from: HOLDER,
-            to: RECIPIENT,
-            ensName: null,
-            amount: "1.5",
-            token: NOVEL,
-            tokenSymbol: "NOVEL",
-            tokenDecimals,
-        });
+        confirmTx.show(txInfo(tokenBalance));
         await settle();
-        return { balance: text("confirm-balance"), message: balanceError() };
+        return { balance: text("confirm-balance"), errors: errors() };
     }
 
     test("the balance line states unknown rather than a quantity of zero", async () => {
         const unknown = await render(null);
-        const zero = await render(18);
+        const zero = await render("0.0");
         expect(unknown.balance).not.toBe(zero.balance);
         expect(unknown.balance).toBe("unknown (NOVEL)");
         expect(zero.balance).toBe("0.0000 NOVEL");
     });
 
     // Both hit INSUFFICIENT_TOKEN — an unknown balance is treated as nothing to
-    // spend from, which is the fail-closed side — but "your balance does not
-    // cover this amount" is a claim about the holding, and this one has no
-    // established quantity to claim.
-    test("the insufficient-balance message names the reason, not a shortfall", async () => {
+    // spend from, which is the fail-closed side — but "you have 0.0" is a claim
+    // about the holding, and this one has no established quantity to claim.
+    test("the insufficient-balance message names the reason, not a figure", async () => {
         const unknown = await render(null);
-        const zero = await render(18);
-        expect(unknown.message).toContain("This token's balance is unknown");
-        expect(unknown.message).not.toContain("does not cover");
-        expect(zero.message).toBe(
-            "Your NOVEL balance does not cover this amount. Please go back and" +
-                " send a smaller amount.",
-        );
+        const zero = await render("0.0");
+        expect(unknown.errors).not.toBe(zero.errors);
+        expect(unknown.errors).toContain("This token's balance is unknown");
+        expect(unknown.errors).not.toContain("You have");
+        expect(zero.errors).toContain("You have 0.0000 NOVEL");
+        expect(zero.errors).not.toContain("balance is unknown");
     });
 });