fix: show balances and fees below 0.000001 ETH as nonzero on the send screens (closes #343)

The stored ETH balance and the send-confirm screen's fee were each cut to six
decimal places, so a value below 0.000001 read as 0.0. The ETH balance is now
stored exactly, and the send and send-confirm screens' balances, reserve and
insufficient-balance messages go through truncateAmountNeverZero(). Both the
send-confirm and approval screens render the fee through formatFee(), which
prices the exact fee in USD, so the same fee reads the same on both. Token
balances keep their six-decimal value: it also leaves dust off the balance
list, and keeps the string within the 18 decimals the balance check reads.

Model: opus-5-5

README.md

@@ -892,12 +892,20 @@ shows is a V4 exact-in `amountIn` of zero.
 The rule and its exception live in `src/shared/amountDisplay.js` as
 `truncateAmount()` and `truncateAmountNeverZero()`. Everything the approval and
 confirmation screens display goes through the floored one — the ERC-20 amount,
-the ETH value and max fee (`src/popup/views/approval.js`), and the swap's
+the ETH value and max fee (`src/popup/views/approval.js`), the swap's `Amount`
-`Amount` and `Min. received` lines (`src/shared/uniswap.js`). The history and
+and `Min. received` lines (`src/shared/uniswap.js`), the Send screen's
-balance lists (`src/shared/transactions.js`) use the unfloored one: the
+`Current balance` (`src/popup/views/send.js`), and the balance and network fee
-transaction detail view is the authoritative record and already shows exact
+on the confirmation screen for the wallet's own send
-precision. The 4-decimal rule is unchanged everywhere else, including for
+(`src/popup/views/confirmTx.js`). Both screens render a network fee through
-amounts at or above the floor on the approval screens.
+`formatFee()` in `src/popup/views/helpers.js`, which prices the exact fee in USD
+rather than its truncated figure, so the same fee reads the same on both, USD
+value included. The ETH balance is stored exactly, so a balance below the floor
+reaches these screens as it is. A token balance is stored to six decimal places,
+and a holding below 0.000001 is not listed at all. The history and balance lists
+(`src/shared/transactions.js`) use the unfloored one: the transaction detail
+view is the authoritative record and already shows exact precision. The
+4-decimal rule is unchanged everywhere else, including for amounts at or above
+the floor on the approval screens.
 
 The floor applies only where the token's scale is known. Where it is not, the
 approval screen states base units instead of a quantity — see Unknown token

TODO.md

@@ -45,6 +45,20 @@ but the review is broader than any of them.
 
 # Completed Steps
 
+- 2026-10-04: The Send and confirmation screens no longer show an ETH balance or
+  a network fee below 0.000001 as `0.0`
+  ([#343](https://git.eeqj.de/sneak/AutistMask/issues/343)). The stored ETH
+  balance (`src/shared/balances.js`) and the confirmation screen's fee were each
+  cut to six decimal places by a rule of their own. The ETH balance is now
+  stored exactly, and the Send screen's `Current balance`, and the confirmation
+  screen's balance, fee, reserve and insufficient-balance messages, go through
+  `truncateAmountNeverZero()` in `src/shared/amountDisplay.js`, the helper the
+  approval screen already used. The confirmation and approval screens both
+  render the fee through `formatFee()` in `src/popup/views/helpers.js`, which
+  prices the exact fee in USD, so the same fee reads the same on both, USD value
+  included. Token balances are still stored to six decimal places: that cut is
+  also what leaves a holding below 0.000001 off the balance list, and keeps the
+  stored string within the 18 decimals the balance check reads.
 - 2026-10-03: The typed-data signing screen warns for a token permission, and
   names the primary type ethers signs
   ([#400](https://git.eeqj.de/sneak/AutistMask/issues/400)). A Permit or Permit2

src/popup/views/approval.js

@@ -8,6 +8,7 @@ const {
     renderAddressHtml,
     attachCopyHandlers,
     onViewLeave,
+    formatFee,
 } = require("./helpers");
 const { state, saveState } = require("../../shared/state");
 const { networkByChainId } = require("../../shared/networks");
@@ -207,7 +208,7 @@ function showPhishingWarning(elementId, isPhishing) {
 // and the nonce. The background compares every one of them against the signed
 // artifact, so every one of them has to be on the screen — a number that is
 // verified but never displayed is verified against nothing the user agreed to.
-function showTxFee(approvedTx, ethPrice) {
+function showTxFee(approvedTx) {
     const network = networkByChainId(approvedTx.chainId);
     $("approve-tx-network").textContent = network
         ? network.name
@@ -215,12 +216,9 @@ function showTxFee(approvedTx, ethPrice) {
 
     const gasLimit = BigInt(approvedTx.gasLimit);
     const feePerGas = BigInt(approvedTx.maxFeePerGas || approvedTx.gasPrice);
-    const maxFeeEth = formatTxValue(formatEther(gasLimit * feePerGas));
+    // Through formatFee(), as the confirmation screen's fee is, so the same
-    const usdStr = formatUsd(
+    // fee reads the same on both.
-        ethPrice ? parseFloat(maxFeeEth) * ethPrice : null,
+    $("approve-tx-fee").textContent = formatFee(gasLimit * feePerGas);
-    );
-    $("approve-tx-fee").textContent =
-        maxFeeEth + " ETH" + (usdStr ? " (" + usdStr + ")" : "");
 
     let detail =
         gasLimit.toString() +
@@ -332,7 +330,7 @@ function showTxApproval(details) {
     $("approve-tx-value").textContent =
         ethValueFormatted + " ETH" + (usdStr ? " (" + usdStr + ")" : "");
 
-    showTxFee(approvedTx, ethPrice);
+    showTxFee(approvedTx);
 
     // Decode calldata (reuse decoded from above)
     const decodedEl = $("approve-tx-decoded");

src/popup/views/confirmTx.js

@@ -15,6 +15,7 @@ const {
     attachCopyHandlers,
     goBack,
     onViewLeave,
+    formatFee,
 } = require("./helpers");
 const { state } = require("../../shared/state");
 const { getSignerForAddress } = require("../../shared/wallet");
@@ -31,6 +32,9 @@ const {
     transferAmountUnits,
 } = require("../../shared/transferAmount");
 const { assertWithinCeilings } = require("../../shared/approvalVerify");
+// The balance lines, the fee reserve and the insufficient-balance messages go
+// through it, as the approval screen's amounts do.
+const { truncateAmountNeverZero } = require("../../shared/amountDisplay");
 const {
     CODES,
     FEE_PENDING,
@@ -150,11 +154,17 @@ function show(txInfo) {
         $("confirm-balance").textContent =
             bal == null
                 ? "unknown (" + symbol + ")"
-                : valueWithUsd(bal + " " + symbol, balUsd);
+                : valueWithUsd(
+                      truncateAmountNeverZero(bal) + " " + symbol,
+                      balUsd,
+                  );
     } else {
         const bal = txInfo.balance || "0";
         const balUsd = ethPrice ? parseFloat(bal) * ethPrice : null;
-        $("confirm-balance").textContent = valueWithUsd(bal + " ETH", balUsd);
+        $("confirm-balance").textContent = valueWithUsd(
+            truncateAmountNeverZero(bal) + " ETH",
+            balUsd,
+        );
     }
 
     // Check for warnings (synchronous local checks)
@@ -249,7 +259,7 @@ function renderValidation(txInfo) {
                 : "Insufficient " +
                       symbol +
                       " balance. You have " +
-                      txInfo.tokenBalance +
+                      truncateAmountNeverZero(txInfo.tokenBalance) +
                       " " +
                       symbol +
                       " but are trying to send " +
@@ -262,7 +272,7 @@ function renderValidation(txInfo) {
     if (codes.includes(CODES.INSUFFICIENT_ETH)) {
         messages.push(
             "Insufficient balance. You have " +
-                txInfo.balance +
+                truncateAmountNeverZero(txInfo.balance || "0") +
                 " ETH but are trying to send " +
                 txInfo.amount +
                 " ETH.",
@@ -305,14 +315,6 @@ function setVisible(id, visible) {
     $(id).style.visibility = visible ? "visible" : "hidden";
 }
 
-// A fee in wei as an ETH string, truncated to 6 decimal places.
-function formatFeeEth(wei) {
-    const parts = formatEther(wei).split(".");
-    const dec =
-        parts.length > 1 ? parts[1].slice(0, 6).replace(/0+$/, "") || "0" : "0";
-    return parts[0] + "." + dec + " ETH";
-}
-
 async function estimateGas(txInfo) {
     try {
         const provider = getProvider(state.rpcUrl, state.networkId);
@@ -359,26 +361,20 @@ async function estimateGas(txInfo) {
         // flight; a stale fee must not reach the screen or the balance check.
         if (pendingTx !== txInfo) return;
 
-        const ethPrice = getPrice("ETH");
+        // The fee lines go through formatFee(), as the approval screen's
-        const usd = (wei) =>
+        // does, so the same fee reads the same on both.
-            ethPrice ? parseFloat(formatEther(wei)) * ethPrice : null;
-
         if (estimateWei !== null && estimateWei < gasCostWei) {
-            $("confirm-fee-amount").textContent = valueWithUsd(
+            $("confirm-fee-amount").textContent = "~" + formatFee(estimateWei);
-                "~" + formatFeeEth(estimateWei),
-                usd(estimateWei),
-            );
             $("confirm-fee-reserve").textContent =
-                "up to " + formatFeeEth(gasCostWei) + " reserved";
+                "up to " +
+                truncateAmountNeverZero(formatEther(gasCostWei)) +
+                " ETH reserved";
             setVisible("confirm-fee-reserve", true);
         } else {
             // No spread to report: either there is no estimate, or the node
             // quotes a gas price at or above maxFeePerGas, so the expected
             // cost is not below the reserve. Show the reserve alone.
-            $("confirm-fee-amount").textContent = valueWithUsd(
+            $("confirm-fee-amount").textContent = formatFee(gasCostWei);
-                formatFeeEth(gasCostWei),
-                usd(gasCostWei),
-            );
             setVisible("confirm-fee-reserve", false);
         }
         feeStatus = FEE_KNOWN;

src/popup/views/helpers.js

@@ -12,6 +12,8 @@
 // escapeHtml lives in src/shared/html.js, where the escape and the
 // reasoning behind it are; it is re-exported below so views keep importing
 // it from here.
+const { formatEther } = require("ethers");
+const { truncateAmountNeverZero } = require("../../shared/amountDisplay");
 const { DEBUG } = require("../../shared/constants");
 const { escapeHtml } = require("../../shared/html");
 const { isDebug } = require("../../shared/log");
@@ -243,6 +245,19 @@ function unknownableAmount(balance) {
     return Number.isFinite(n) ? n : null;
 }
 
+// A network fee in wei as the confirmation and approval screens both show it:
+// the ETH figure through truncateAmountNeverZero(), then its USD value when the
+// ETH price is known. The USD value is of the exact fee, not of the truncated
+// figure, so it never understates what the fee costs.
+function formatFee(wei) {
+    const eth = formatEther(wei);
+    const ethPrice = getPrice("ETH");
+    const usd = ethPrice ? formatUsd(parseFloat(eth) * ethPrice) : "";
+    return (
+        truncateAmountNeverZero(eth) + " ETH" + (usd ? " (" + usd + ")" : "")
+    );
+}
+
 // One row of the balance list: symbol, quantity, fiat value.
 //
 // `symbol` is the ERC-20's own symbol() as the block explorer reported it,
@@ -610,6 +625,7 @@ module.exports = {
     balanceLinesForAddress,
     addressHoldsFunds,
     unknownableAmount,
+    formatFee,
     addressColor,
     addressDotHtml,
     escapeHtml,

src/popup/views/send.js

@@ -16,6 +16,7 @@ const { resolveTokenDecimals } = require("../../shared/approvalAmount");
 const { resolveSymbol } = require("../../shared/tokenList");
 const { isLowHolderCount } = require("../../shared/holders");
 const { isSpoofedSymbol } = require("../../shared/symbolSpoof");
+const { truncateAmountNeverZero } = require("../../shared/amountDisplay");
 const { getAddress } = require("ethers");
 
 const ZERO_ADDRESS = "0x0000000000000000000000000000000000000000";
@@ -150,7 +151,9 @@ function updateSendBalance() {
     const token = state.selectedToken || $("send-token").value;
     if (token === "ETH") {
         $("send-balance").textContent =
-            "Current balance: " + (addr.balance || "0") + " ETH";
+            "Current balance: " +
+            truncateAmountNeverZero(addr.balance || "0") +
+            " ETH";
     } else {
         const tb = (addr.tokenBalances || []).find(
             (t) => t.address.toLowerCase() === token.toLowerCase(),
@@ -167,7 +170,10 @@ function updateSendBalance() {
         $("send-balance").textContent =
             bal == null
                 ? "Current balance: unknown (" + symbol + ")"
-                : "Current balance: " + bal + " " + symbol;
+                : "Current balance: " +
+                  truncateAmountNeverZero(bal) +
+                  " " +
+                  symbol;
     }
 }
 

src/shared/balances.js

@@ -52,14 +52,12 @@ function requireNetworkId(networkId) {
     return net;
 }
 
-function formatBalance(wei) {
+// A token balance cut to six decimal places. Two things rely on the cut: a
-    const eth = formatEther(wei);
+// holding below 0.000001 comes out as "0.0" and is left off the balance list as
-    const parts = eth.split(".");
+// dust, and the stored string never carries more decimals than the balance
-    if (parts.length === 1) return eth + ".0";
+// check on the confirmation screen can read (18, in txValidation.js), whatever
-    const dec = parts[1].slice(0, 6).replace(/0+$/, "") || "0";
+// scale the token declares. Screens truncate it again for display, through
-    return parts[0] + "." + dec;
+// src/shared/amountDisplay.js.
-}
-
 function formatTokenBalance(raw, decimals) {
     const val = formatUnits(raw, decimals);
     const parts = val.split(".");
@@ -221,7 +219,10 @@ async function refreshBalances(
                 provider
                     .getBalance(addr.address)
                     .then((bal) => {
-                        addr.balance = formatBalance(bal);
+                        // Exact, never cut: the screens truncate for display
+                        // themselves, and a cut here stores a small nonzero
+                        // balance as zero.
+                        addr.balance = formatEther(bal);
                         log.debugf("ETH balance", addr.address, addr.balance);
                     })
                     .catch((e) => {

tests/e2e/run.js

@@ -1414,9 +1414,10 @@ test("a rejected dust threshold shifts no layout (#233)", async (env) => {
 // on opposite sides of the reserve while sitting on the same side of the
 // estimate.
 
-// The balance the funded fixture serves, and the amounts sent against it.
+// The balance the funded fixture serves, as the Send and confirmation screens
+// show it, and the amounts sent against it.
 const FUNDED_ETH_WEI = 10n ** 18n;
-const FUNDED_ETH_TEXT = "1.0";
+const FUNDED_ETH_TEXT = "1.0000";
 const COMFORTABLE_AMOUNT = "0.1";
 const OVER_BALANCE_AMOUNT = "2.0";
 
@@ -1430,7 +1431,7 @@ const GAP_AMOUNT = formatEther(FUNDED_ETH_WEI - FEE_ESTIMATE_WEI);
 // fee test: it covers the expected cost to the wei and falls short of the
 // reserve, so the same swap flips this assertion too — through a different
 // balance and a different message than the ETH path uses.
-const TOKEN_BALANCE_TEXT = "1.5";
+const TOKEN_BALANCE_TEXT = "1.5000";
 const TOKEN_AMOUNT = "0.25";
 const OVER_TOKEN_AMOUNT = "9.0";
 const FEE_ONLY_ETH_WEI = FEE_ESTIMATE_WEI;
@@ -1439,16 +1440,15 @@ function toHexWei(wei) {
     return "0x" + wei.toString(16);
 }
 
-// A fee in wei as the confirmation screen writes it. Deliberately a second
+// A fee in wei as the confirmation screen writes it: truncated to four decimal
-// implementation of formatFeeEth() from src/popup/views/confirmTx.js rather
+// places (README.md, Display Consistency). Deliberately a second
-// than an import of it: that module pulls in the whole popup and cannot be
+// implementation rather than an import of src/shared/amountDisplay.js:
-// required outside a browser, and asserting against an independent rendering
+// asserting against an independent rendering is stronger than asserting a
-// is stronger than asserting a function equals itself.
+// function equals itself. The fixture's fees are above 0.0001 ETH, so the
+// nonzero floor never applies here.
 function feeEth(wei) {
-    const parts = formatEther(wei).split(".");
+    const [whole, frac = ""] = formatEther(wei).split(".");
-    const dec =
+    return whole + "." + (frac + "0000").slice(0, 4) + " ETH";
-        parts.length > 1 ? parts[1].slice(0, 6).replace(/0+$/, "") || "0" : "0";
-    return parts[0] + "." + dec + " ETH";
 }
 
 // What the confirmation screen is showing right now, read out of the DOM in
@@ -1505,11 +1505,10 @@ async function backToAddress(page) {
 
 // Drive the popup to the confirmation screen for one send.
 //
-// It waits for the send screen to be showing `balance` before filling
+// It waits for the send screen to be showing `balance`, the fixture's balance
-// anything in. That figure is the exact number the spend gate compares
+// as that screen displays it, before filling anything in. Waiting for it —
-// against, so waiting for it — rather than for a refresh to have probably
+// rather than for a refresh to have probably landed — is what keeps every
-// landed — is what keeps every assertion below deterministic after a
+// assertion below deterministic after a fixture change.
-// fixture change.
 async function goToConfirm(page, { token, balance, amount }) {
     await backToAddress(page);
     await page.click("#btn-send");

tests/sendDisplayFloor.test.js

@@ -0,0 +1,284 @@
+// The balance and fee lines of the Send and confirmation screens, and the fee
+// line they must share with the approval screen.
+//
+// An ETH balance or a fee below 0.000001 rendered as `0.0` on these screens
+// (https://git.eeqj.de/sneak/AutistMask/issues/343): the stored balance and the
+// fee were each cut to six decimal places, a rule of their own, while the
+// approval screen showed the same fee through src/shared/amountDisplay.js with
+// the nonzero floor. Both now go through that one helper.
+//
+// Driven through the real refreshBalances(), Send screen, confirmation screen
+// and approval screen, with only the node and the DOM stubbed: a balance
+// written onto state by hand would skip the place the cut happened.
+
+"use strict";
+
+// What the stub node answers. Each test sets what it needs.
+const mockNode = {
+    balanceWei: 0n,
+    feeData: { maxFeePerGas: 1n, gasPrice: 1n },
+};
+
+jest.mock("ethers", () => {
+    const actual = jest.requireActual("ethers");
+    class StubProvider {
+        async getBalance() {
+            return mockNode.balanceWei;
+        }
+        async lookupAddress() {
+            return null;
+        }
+        async getFeeData() {
+            return mockNode.feeData;
+        }
+        async estimateGas() {
+            return 21000n;
+        }
+        async getCode() {
+            return "0x";
+        }
+        async getTransactionCount() {
+            return 1;
+        }
+    }
+    return {
+        ...actual,
+        JsonRpcProvider: StubProvider,
+        Network: { from: () => ({}) },
+    };
+});
+
+jest.mock("../src/shared/log", () => ({
+    log: {
+        debugf: () => {},
+        infof: () => {},
+        warnf: () => {},
+        errorf: () => {},
+    },
+    // The explorer's token list, which refreshBalances() also fetches: empty.
+    debugFetch: jest.fn(async () => ({
+        ok: true,
+        status: 200,
+        json: async () => [],
+    })),
+    setRuntimeDebug: () => {},
+    isDebug: () => false,
+}));
+
+// The confirmation screen's Etherscan label lookup is the only fetch() these
+// screens make; it fails, as it does offline.
+global.fetch = jest.fn(() => {
+    throw new Error("tests must not perform network requests");
+});
+
+// The approval the background hands the approval screen. Set per test.
+let approvalDetails = null;
+
+const { makeStorageStub } = require("./support/storageStub");
+global.chrome = {
+    storage: makeStorageStub(),
+    runtime: {
+        connect: () => ({
+            postMessage() {},
+            disconnect() {},
+            onDisconnect: { addListener() {} },
+        }),
+        sendMessage(message, callback) {
+            callback(
+                message.type === "AUTISTMASK_GET_APPROVAL"
+                    ? approvalDetails
+                    : undefined,
+            );
+        },
+    },
+};
+
+// A stub DOM: every id resolves to a recording element.
+const elements = new Map();
+
+function makeEl(id) {
+    const handlers = new Map();
+    return {
+        id,
+        textContent: "",
+        innerHTML: "",
+        value: "",
+        disabled: false,
+        style: {},
+        dataset: {},
+        classList: {
+            add() {},
+            remove() {},
+            toggle() {},
+            contains: () => false,
+        },
+        handlers,
+        addEventListener(name, fn) {
+            handlers.set(name, fn);
+        },
+        appendChild(child) {
+            return child;
+        },
+        querySelectorAll: () => [],
+        querySelector: () => null,
+        remove() {},
+        focus() {},
+    };
+}
+
+global.document = {
+    getElementById(id) {
+        if (!elements.has(id)) elements.set(id, makeEl(id));
+        return elements.get(id);
+    },
+    createElement: (tag) => makeEl(tag),
+    body: { prepend() {}, appendChild() {} },
+    addEventListener() {},
+};
+global.navigator = { clipboard: { writeText() {} } };
+
+const { refreshBalances } = require("../src/shared/balances");
+const { state } = require("../src/shared/state");
+const { prices, clearPrices } = require("../src/shared/prices");
+const send = require("../src/popup/views/send");
+const confirmTx = require("../src/popup/views/confirmTx");
+const approval = require("../src/popup/views/approval");
+
+const HOLDER = "0x" + "a".repeat(40);
+const RECIPIENT = "0xC0FfEE0000000000000000000000000000c0fFEe";
+
+// 0.0000005 ETH.
+const HALF_MICRO_ETH = 500000000000n;
+
+function text(id) {
+    return global.document.getElementById(id).textContent;
+}
+
+// The ETH balance the node reports, fetched and stored exactly where the popup
+// stores it.
+async function refreshWith(balanceWei) {
+    mockNode.balanceWei = balanceWei;
+    state.wallets = [{ name: "Wallet 1", addresses: [{ address: HOLDER }] }];
+    state.selectedWallet = 0;
+    state.selectedAddress = 0;
+    await refreshBalances(
+        state.wallets,
+        "https://rpc.example.invalid",
+        "https://blockscout.example/api/v2",
+        [],
+        "mainnet",
+    );
+}
+
+// Press Review on the Send screen for an ETH send, and show the confirmation
+// screen it leads to with its fee estimate settled.
+async function confirmEthSend(amount) {
+    let txInfo = null;
+    send.init({ showConfirmTx: (info) => (txInfo = info) });
+    state.selectedToken = "ETH";
+    global.document.getElementById("send-to").value = RECIPIENT;
+    global.document.getElementById("send-amount").value = amount;
+    await global.document
+        .getElementById("btn-send-review")
+        .handlers.get("click")();
+    confirmTx.show(txInfo);
+    for (let i = 0; i < 10; i++) await new Promise((r) => setTimeout(r, 0));
+}
+
+// The approval screen for a dApp transaction of 21000 gas, the gas the stub
+// node estimates for the send above.
+async function approveTxWithFeePerGas(maxFeePerGas) {
+    approvalDetails = {
+        type: "tx",
+        hostname: "dapp.example",
+        approvedFrom: HOLDER,
+        approvedTx: {
+            to: RECIPIENT,
+            value: "0",
+            data: "0x",
+            chainId: "0x1",
+            gasLimit: "21000",
+            maxFeePerGas: String(maxFeePerGas),
+            nonce: 0,
+        },
+    };
+    await approval.show("1");
+}
+
+beforeEach(() => {
+    elements.clear();
+    state.selectedToken = null;
+    state.trackedTokens = [];
+    state.fraudContracts = [];
+    state.currentView = null;
+    mockNode.feeData = { maxFeePerGas: 1n, gasPrice: 1n };
+});
+
+describe("an ETH balance below 0.000001 never renders as zero", () => {
+    test("on the Send screen", async () => {
+        await refreshWith(HALF_MICRO_ETH);
+        state.selectedToken = "ETH";
+        send.updateSendBalance();
+        expect(text("send-balance")).toBe("Current balance: 0.0000005 ETH");
+    });
+
+    test("on the confirmation screen", async () => {
+        await refreshWith(HALF_MICRO_ETH);
+        await confirmEthSend("0.0000001");
+        expect(text("confirm-balance")).toBe("0.0000005 ETH");
+    });
+
+    test("while a balance above the floor keeps four decimals", async () => {
+        await refreshWith(1234567890000000000n);
+        await confirmEthSend("0.1");
+        expect(text("confirm-balance")).toBe("1.2345 ETH");
+    });
+});
+
+describe("a fee below 0.000001 ETH never renders as zero", () => {
+    test("when the estimate and the reserve are the same", async () => {
+        await refreshWith(10n ** 18n);
+        await confirmEthSend("0.1");
+        // 21000 gas at 1 wei is 0.000000000000021 ETH, shown to its first
+        // significant digit.
+        expect(text("confirm-fee-amount")).toBe("0.00000000000002 ETH");
+    });
+
+    test("when they differ, on both lines", async () => {
+        mockNode.feeData = { maxFeePerGas: 2n, gasPrice: 1n };
+        await refreshWith(10n ** 18n);
+        await confirmEthSend("0.1");
+        expect(text("confirm-fee-amount")).toBe("~0.00000000000002 ETH");
+        expect(text("confirm-fee-reserve")).toBe(
+            "up to 0.00000000000004 ETH reserved",
+        );
+    });
+});
+
+// The confirmation screen shows the reserve alone when the node quotes no
+// cheaper estimate, and that reserve is the same gas limit times maximum fee
+// per gas that the approval screen calls the max fee. An ETH price is set, as
+// it is on mainnet, so the USD value has to match too.
+describe("the same fee reads the same on the confirmation and approval screens", () => {
+    beforeEach(() => {
+        prices.ETH = 3000;
+    });
+    afterEach(() => {
+        clearPrices();
+    });
+
+    test.each([
+        // 21000 gas at 1 wei.
+        ["below the floor", 1n, "0.00000000000002 ETH (< $0.01)"],
+        // 0.001235294117631 ETH, which is $3.71. Pricing the truncated
+        // 0.0012 instead would read $3.60.
+        ["with more than four decimals", 58823529411n, "0.0012 ETH ($3.71)"],
+    ])("%s", async (_label, feePerGas, expected) => {
+        mockNode.feeData = { maxFeePerGas: feePerGas, gasPrice: feePerGas };
+        await refreshWith(10n ** 18n);
+        await confirmEthSend("0.1");
+        expect(text("confirm-fee-amount")).toBe(expected);
+        await approveTxWithFeePerGas(feePerGas);
+        expect(text("approve-tx-fee")).toBe(expected);
+    });
+});

tests/unknownScaleSend.test.js

@@ -389,7 +389,7 @@ describe("a scale the explorer's own rows disagree about", () => {
         expect(txInfo.tokenBalance).toBe("5.0");
         confirmTx.show(txInfo);
         await settle();
-        expect(text("confirm-balance")).toBe("5.0 NOVEL");
+        expect(text("confirm-balance")).toBe("5.0000 NOVEL");
         expect(errors()).toBe("");
         expect(sendDisabled()).toBe(false);
     });
@@ -431,7 +431,7 @@ describe("the confirmation screen tells an unknown balance from a zero one", ()
         const zero = await render("0.0");
         expect(unknown.balance).not.toBe(zero.balance);
         expect(unknown.balance).toBe("unknown (NOVEL)");
-        expect(zero.balance).toBe("0.0 NOVEL");
+        expect(zero.balance).toBe("0.0000 NOVEL");
     });
 
     // Both hit INSUFFICIENT_TOKEN — an unknown balance is treated as nothing to
@@ -443,7 +443,7 @@ describe("the confirmation screen tells an unknown balance from a zero one", ()
         expect(unknown.errors).not.toBe(zero.errors);
         expect(unknown.errors).toContain("This token's balance is unknown");
         expect(unknown.errors).not.toContain("You have");
-        expect(zero.errors).toContain("You have 0.0 NOVEL");
+        expect(zero.errors).toContain("You have 0.0000 NOVEL");
         expect(zero.errors).not.toContain("balance is unknown");
     });
 });