fix: tracked tokens are kept per network, and bundled picks are offered on mainnet only (closes #523)

A network switch now puts the outgoing network's tracked tokens away in a new
persisted field, networkTrackedTokens, and brings back the incoming network's
list, or an empty one, the way endpoints are kept per network. trackedTokens
stays the active network's list, so its readers are unchanged, and the
background's switch goes through the same function. The two add-token screens
offer their common-token picks, which are mainnet contracts, on Ethereum
Mainnet only. After a switch in Settings, Back finds the screens beneath as a
reopened popup does: it renders the one it lands on for the new network, and
the stack is cut at the first screen that cannot be rendered from saved state.

Model: opus-5-5

README.md

@@ -1494,6 +1494,15 @@ such as an edit typed into Settings and not yet saved. Home is the one screen
 "Back" always re-renders, so the wallet list reflects anything that changed
 while the user was away from it.
 
+A network switch in Settings leaves every screen beneath Settings showing the
+previous network, so after it "Back" behaves as in a reopened popup: every
+screen on the stack counts as not yet rendered, and the stack is cut at the
+first screen that cannot be rendered from saved state, such as Send or AddToken.
+"Back" then renders the screen it lands on for the new network, and anything
+typed there and not saved, which belonged to the previous network, is dropped.
+Without a wallet the stack is not cut, because it starts at Welcome, which shows
+nothing from a network.
+
 Every screen that holds secret material in the page registers a cleanup with
 `onViewLeave()` (`src/popup/views/helpers.js`), which `showView()` runs on every
 exit from that screen rather than only on its "Back" button, so nothing secret
@@ -1924,7 +1933,8 @@ view would leave a wallet one click from deletion.
     - Contract address input
     - Status line ("Looking up token...", cleared or replaced on failure)
     - Common token quick-pick buttons (top 25 by market cap), which fill the
-      contract address input
+      contract address input. Shown on Ethereum Mainnet only, because the
+      bundled token list holds mainnet contracts
     - "Add" button
 - **Transitions**:
     - "Add" (valid contract) → tracks the token, pops the stack, and re-renders
@@ -1941,16 +1951,19 @@ view would leave a wallet one click from deletion.
     - Wallets: one row per wallet with its name (tap to rename inline), a
       `[recovery phrase]` button on HD wallets only, and an `[x]` delete button,
       plus a "+ Add wallet" button
-    - Tracked Tokens: one row per tracked token with an `[x]` remove button,
-      plus a "+ Add token" button
+    - Tracked Tokens: one row per token tracked on the active network with an
+      `[x]` remove button, plus a "+ Add token" button
     - Display: "Show tracked tokens with zero balance" checkbox, "UTC
       Timestamps" checkbox, and a Theme selector (System / Light / Dark)
     - Network: network selector (Ethereum Mainnet / Sepolia Testnet). The
       network changes only here, or when the user approves a site's request on
       **NetworkApproval**; either way, switching restores the RPC and Blockscout
       endpoints last used on that network, or that network's defaults if it has
-      none, and sends `chainChanged` with the new chain id to every open tab.
-      Choosing the network already active changes nothing and sends nothing
+      none, and the tokens tracked on that network, and sends `chainChanged`
+      with the new chain id to every open tab. A token is tracked only on the
+      network it was added on, because a contract address names a token on one
+      network only. Choosing the network already active changes nothing and
+      sends nothing
     - Ethereum RPC: endpoint URL input + "Save" button (validated against
       `eth_chainId` before being saved)
     - Blockscout API: endpoint URL input + "Save" button (validated against
@@ -1995,7 +2008,8 @@ view would leave a wallet one click from deletion.
     - `[x]` on a denied site → forgets the refusal, in place; it connects
       nothing and tells the background nothing
     - Ten clicks on the version → reveals the Debug well (no screen change)
-    - "Back" (or Settings gear again) → previous screen (Home)
+    - "Back" (or Settings gear again) → previous screen (Home); after a network
+      switch, the stack is cut first (see the top of Screen Map)
 
 #### ShowRecoveryPhrase (`show-phrase`)
 
@@ -2174,7 +2188,8 @@ view would leave a wallet one click from deletion.
 #### SettingsAddToken (`settings-addtoken`)
 
 - **When**: User tapped "+ Add token" in Settings. Tokens added here are tracked
-  across every address, unlike AddToken which is reached from one address.
+  across every address on the active network, unlike AddToken which is reached
+  from one address.
 - **Elements**:
     - "Back" button, "Add Token" heading
     - Instruction text
@@ -2183,8 +2198,12 @@ view would leave a wallet one click from deletion.
     - "Or pick from top 100:" dropdown (already-tracked tokens are disabled) +
       "Add selected" button
     - "Or enter contract address:" input, a status line, and an "Add" button
+    - The two lists from the bundled token list, "Top tokens:" and "Or pick from
+      top 100:", are shown on Ethereum Mainnet only, because that list holds
+      mainnet contracts. On any other network the contract address is the only
+      add path
 - **Transitions**:
-    - Any of the three add paths, on success → adds the token and shows an
+    - Any of the add paths shown, on success → adds the token and shows an
       "Added SYMBOL" flash message (no screen change)
     - A duplicate, a scam-listed address, or a failed contract lookup → flash
       message, no screen change
@@ -2402,8 +2421,9 @@ view would leave a wallet one click from deletion.
 - **Transitions**:
     - "Switch" → closes popup; the background switches the network as
       **Settings** does, restoring the RPC and Blockscout endpoints last used on
-      that network (or that network's defaults if it has none), sends
-      `chainChanged` to every open tab, and answers the site with success
+      that network (or that network's defaults if it has none) and the tokens
+      tracked on that network, sends `chainChanged` to every open tab, and
+      answers the site with success
     - "Reject" → closes popup; the site is answered with EIP-1193 code 4001 and
       nothing changes
     - Popup window closed without answering → the same as "Reject"

src/popup/index.html

@@ -838,7 +838,7 @@
                     id="add-token-info"
                     class="text-xs text-muted mb-2 min-h-[1.25rem] invisible"
                 ></div>
-                <div class="mb-2">
+                <div id="add-token-common" class="mb-2">
                     <label class="block mb-1 text-xs text-muted"
                         >Or pick a common token:</label
                     >
@@ -1321,36 +1321,39 @@
                 <h2 class="font-bold mb-2">Add Token</h2>
                 <p class="text-xs text-muted mb-3">
                     Pick a common token or enter a contract address manually.
+                    Common tokens are offered on Ethereum Mainnet only.
                 </p>
 
-                <!-- top 10 quick-pick buttons -->
-                <div class="mb-3">
-                    <label class="block mb-1 text-xs text-muted"
-                        >Top tokens:</label
-                    >
-                    <div
-                        id="settings-addtoken-top10"
-                        class="flex flex-wrap gap-1"
-                    ></div>
-                </div>
+                <div id="settings-addtoken-common">
+                    <!-- top 10 quick-pick buttons -->
+                    <div class="mb-3">
+                        <label class="block mb-1 text-xs text-muted"
+                            >Top tokens:</label
+                        >
+                        <div
+                            id="settings-addtoken-top10"
+                            class="flex flex-wrap gap-1"
+                        ></div>
+                    </div>
 
-                <!-- top 100 dropdown -->
-                <div class="mb-3">
-                    <label class="block mb-1 text-xs text-muted"
-                        >Or pick from top 100:</label
-                    >
-                    <select
-                        id="settings-addtoken-select"
-                        class="border border-border p-1 w-full font-mono text-sm bg-bg text-fg"
-                    >
-                        <option value="">-- select --</option>
-                    </select>
-                    <button
-                        id="btn-settings-addtoken-select"
-                        class="border border-border px-2 py-1 mt-1 hover:bg-fg hover:text-bg cursor-pointer"
-                    >
-                        Add selected
-                    </button>
+                    <!-- top 100 dropdown -->
+                    <div class="mb-3">
+                        <label class="block mb-1 text-xs text-muted"
+                            >Or pick from top 100:</label
+                        >
+                        <select
+                            id="settings-addtoken-select"
+                            class="border border-border p-1 w-full font-mono text-sm bg-bg text-fg"
+                        >
+                            <option value="">-- select --</option>
+                        </select>
+                        <button
+                            id="btn-settings-addtoken-select"
+                            class="border border-border px-2 py-1 mt-1 hover:bg-fg hover:text-bg cursor-pointer"
+                        >
+                            Add selected
+                        </button>
+                    </div>
                 </div>
 
                 <!-- manual contract address -->

src/popup/viewRouter.js

@@ -37,9 +37,11 @@ function markViewRendered(view) {
     if (view) renderedViews.add(view);
 }
 
-// Begin a fresh page-load scope. The popup gets one by being loaded; the
+// Begin a fresh page-load scope. The popup gets one by being loaded, and
+// asks for one when the user switches the network, because every screen
+// then on the page shows the previous network (views/settings.js); the
 // unit tests, which simulate several page loads against one module
-// instance, ask for one.
+// instance, ask for one too.
 function resetRenderedViews() {
     renderedViews.clear();
 }
@@ -213,9 +215,10 @@ function renderView(view, state, views) {
 // in the two cases where the view is known to be on the page already:
 //
 //   - It is not one the popup renders from persisted state. The restored
-//     stack is filtered against RESTORABLE_VIEWS, so such a view can only
-//     be on the stack from this page load, where forward navigation
-//     rendered it on the way in.
+//     stack is filtered against RESTORABLE_VIEWS, and a network switch cuts
+//     it the same way (views/settings.js), so such a view can only be on the
+//     stack from this page load, where forward navigation rendered it on the
+//     way in.
 //   - This page load has rendered it. Re-rendering would re-fetch and
 //     clobber what it holds; Home is rendered anyway, see above.
 //

src/popup/views/addToken.js

@@ -9,6 +9,12 @@ function show() {
     $("add-token-address").value = "";
     $("add-token-info").textContent = "";
     $("add-token-info").style.visibility = "hidden";
+    // The bundled list holds Ethereum Mainnet contracts, which name no token
+    // on any other network.
+    $("add-token-common").classList.toggle(
+        "hidden",
+        state.networkId !== "mainnet",
+    );
     const list = $("common-token-list");
     list.innerHTML = getTopTokens(25)
         .map(

src/popup/views/settings.js

@@ -16,6 +16,8 @@ const {
 } = require("../dustThreshold");
 const { state, saveState, currentNetwork } = require("../../shared/state");
 const { onChainSwitch } = require("../../shared/chainSwitch");
+const { restorableStack } = require("../../shared/persistedState");
+const { resetRenderedViews, markViewRendered } = require("../viewRouter");
 const {
     log,
     debugFetch,
@@ -323,8 +325,21 @@ function init(ctx) {
         // Open pages are told by the background, as after a site's approved
         // switch request.
         notify({ type: "AUTISTMASK_NETWORK_CHANGED", chainId: net.chainId });
+        // The screens beneath Settings show the previous network, so Back
+        // finds them as it does in a reopened popup: each is rendered again
+        // when Back lands on it, and the stack is cut at the first one that
+        // cannot be rendered from saved state, such as Send or AddToken.
+        // Without a wallet the stack starts at Welcome, which that cut would
+        // drop, and Welcome shows nothing from a network.
+        if (state.hasWallet) {
+            state.viewStack = restorableStack(state.viewStack, "settings");
+        }
+        resetRenderedViews();
+        // Settings itself is brought up to date for the new network here.
+        markViewRendered("settings");
         $("settings-rpc").value = state.rpcUrl;
         $("settings-blockscout").value = state.blockscoutUrl;
+        renderTrackedTokens();
         showFlash("Switched to " + net.name + ".");
     });
 

src/popup/views/settingsAddToken.js

@@ -75,6 +75,12 @@ function show() {
     $("settings-addtoken-address").value = "";
     $("settings-addtoken-info").textContent = "";
     $("settings-addtoken-info").style.visibility = "hidden";
+    // The bundled list holds Ethereum Mainnet contracts, which name no token
+    // on any other network.
+    $("settings-addtoken-common").classList.toggle(
+        "hidden",
+        state.networkId !== "mainnet",
+    );
     renderTop10();
     renderDropdown();
     showView("settings-addtoken");

src/shared/chainSwitchFields.js

@@ -38,6 +38,16 @@ function applyChainSwitchFields(s, newNetworkId) {
         blockscoutUrl: s.blockscoutUrl,
     };
     const remembered = s.networkEndpoints[net.id] || {};
+
+    // Tracked tokens are kept per network the same way, because a contract
+    // address names a token on one network only. s.trackedTokens stays the
+    // active network's list, so nothing that reads it changes: the outgoing
+    // list is put away under its network, and the incoming network's list, or
+    // an empty one, takes its place.
+    if (!s.networkTrackedTokens) s.networkTrackedTokens = {};
+    s.networkTrackedTokens[s.networkId] = s.trackedTokens;
+    s.trackedTokens = s.networkTrackedTokens[net.id] || [];
+
     s.networkId = net.id;
     s.rpcUrl = remembered.rpcUrl || net.defaultRpcUrl;
     s.blockscoutUrl = remembered.blockscoutUrl || net.defaultBlockscoutUrl;

src/shared/persistedState.js

@@ -23,6 +23,11 @@ const DEFAULT_STATE = {
     hasWallet: false,
     wallets: [],
     trackedTokens: [],
+    // Tracked tokens remembered per network: { [networkId]: [token, ...] }.
+    // trackedTokens above is the active network's list; this is what the
+    // others are restored from when the active network changes. See
+    // applyChainSwitchFields().
+    networkTrackedTokens: {},
     networkId: "mainnet",
     rpcUrl: DEFAULT_RPC_URL,
     blockscoutUrl: DEFAULT_BLOCKSCOUT_URL,
@@ -289,6 +294,20 @@ function normalizePersisted(saved) {
     // profile whose wallets are perfectly fine. An empty list is a legitimate
     // value and survives.
     out.trackedTokens = structuredClone(tokenRefs(saved.trackedTokens));
+    // Each remembered list is floored like trackedTokens, because
+    // applyChainSwitchFields() puts it straight back onto trackedTokens when
+    // its network becomes the active one. A key that is not a network in
+    // networks.js is dropped, which also keeps an own "__proto__" key from
+    // reaching the plain assignment below.
+    out.networkTrackedTokens = {};
+    if (isRecord(saved.networkTrackedTokens)) {
+        for (const netId of Object.keys(saved.networkTrackedTokens)) {
+            if (!isKnownNetworkId(netId)) continue;
+            out.networkTrackedTokens[netId] = structuredClone(
+                tokenRefs(saved.networkTrackedTokens[netId]),
+            );
+        }
+    }
     // The loud refusal for an unknown id is assertStateUsable(); this is the
     // floor under it. networkId is an object KEY into networkEndpoints below,
     // so a value that is not a network in networks.js must never get that far

src/shared/state.js

@@ -42,9 +42,11 @@ const { log } = require("./log");
 // and writes THIS object, never the proxy: the guard is for callers.
 const rawState = {
     ...DEFAULT_STATE,
-    // Its own object, not the one DEFAULT_STATE holds: applyChainSwitchFields()
-    // mutates this map in place, and a spread copies the reference.
+    // Their own objects, not the ones DEFAULT_STATE holds:
+    // applyChainSwitchFields() mutates these maps in place, and a spread copies
+    // the reference.
     networkEndpoints: {},
+    networkTrackedTokens: {},
     currentView: null,
     selectedWallet: null,
     selectedAddress: null,
@@ -438,12 +440,14 @@ function mergeNetworkEndpoints(base, ours, theirs) {
 //
 // Every other persisted field stays a whole-field diff:
 // `trackedTokens`/`fraudContracts`/`viewStack` are arrays of scalars with no
-// per-element identity to merge by; `tokenHolderCache` is a map shaped like
-// the ones above, but nothing in src/ ever writes an entry into it — it is
-// only ever reset wholesale to `{}` (applyChainSwitchFields()) — so there is
-// no in-place mutation for a whole-field diff to collide with; `viewData` is
-// this page's own UI scratch space, not data another page has any reason to
-// share membership of.
+// per-element identity to merge by; `networkTrackedTokens` is diffed whole like
+// `trackedTokens` and `networkId`, the two fields a network switch moves
+// together with it; `tokenHolderCache` is a map shaped like the ones above,
+// but nothing in src/ ever writes an entry into it — it is only ever reset
+// wholesale to `{}` (applyChainSwitchFields()) — so there is no in-place
+// mutation for a whole-field diff to collide with; `viewData` is this page's
+// own UI scratch space, not data another page has any reason to share
+// membership of.
 //
 // This does not make two pages that both change the SAME leaf concurrently
 // safe: last write wins on that one leaf, same as before. What it removes

tests/coldWorkerChainSwitch.test.js

@@ -204,17 +204,21 @@ describe("a chain switch on a worker that never loaded state", () => {
         expect(after.rpcUrl).toBe(SEPOLIA.defaultRpcUrl);
 
         // And it took nothing else with it. Without the load these come back
-        // as [], {}, [] and "system" from DEFAULT_STATE — every wallet in the
+        // as [], {}, {} and "system" from DEFAULT_STATE — every wallet in the
         // extension gone, encrypted secrets included.
         expect(after.wallets).toEqual(walletFixture());
         expect(after.hasWallet).toBe(true);
         expect(after.activeAddress).toBe(ADDRESS);
         expect(after.allowedSites).toEqual({ [ADDRESS]: [CONNECTED_ORIGIN] });
-        expect(after.trackedTokens).toEqual([
-            { address: TOKEN, symbol: "DAI", decimals: 18 },
-        ]);
+        expect(after.networkTrackedTokens).toEqual({
+            mainnet: [{ address: TOKEN, symbol: "DAI", decimals: 18 }],
+        });
         expect(after.theme).toBe("dark");
 
+        // The mainnet token is tracked on mainnet only: Sepolia starts with
+        // none of its own.
+        expect(after.trackedTokens).toEqual([]);
+
         // The user's mainnet endpoint is remembered rather than replaced by
         // the public default, so switching back returns it.
         expect(after.networkEndpoints.mainnet).toEqual({
@@ -226,6 +230,9 @@ describe("a chain switch on a worker that never loaded state", () => {
         expect(bg.persisted().rpcUrl).toBe(CUSTOM_RPC);
         expect(bg.persisted().blockscoutUrl).toBe(CUSTOM_BLOCKSCOUT);
         expect(bg.persisted().wallets).toEqual(walletFixture());
+        expect(bg.persisted().trackedTokens).toEqual([
+            { address: TOKEN, symbol: "DAI", decimals: 18 },
+        ]);
     });
 
     test("compares the requested chain against the stored one, not the default", async () => {

tests/persistedFieldContract.test.js

@@ -97,6 +97,7 @@ const {
     normalizePersisted,
 } = require("../src/shared/persistedState");
 const { stateProblem } = require("../src/shared/stateSchema");
+const { isKnownNetworkId } = require("../src/shared/networks");
 const { RESTORABLE_VIEWS } = require("../src/shared/restorableViews");
 const {
     bootPopup,
@@ -193,6 +194,29 @@ const CONTRACT = [
         floorOnly: [[1, 2], [null], [{}], [[TOKEN_ADDRESS]]],
         holds: (v) => everyEntry(v, (t) => isRecord(t) && isText(t.address)),
     },
+    {
+        field: "networkTrackedTokens",
+        kind: KIND.ENTRIES,
+        hostile: [42, "notarecord", { sepolia: "notalist" }],
+        floorOnly: [
+            [1, 2],
+            { sepolia: [1, 2] },
+            { mainnet: [null, {}, [TOKEN_ADDRESS]] },
+            { notanetwork: [{ address: TOKEN_ADDRESS }] },
+            JSON.parse('{"__proto__":[{"address":"0xabc"}]}'),
+        ],
+        // Each list is put straight back onto trackedTokens by
+        // applyChainSwitchFields() when its network becomes the active one, so
+        // it is floored the same way; a key that names no network is dropped.
+        holds: (v) =>
+            isRecord(v) &&
+            Object.getPrototypeOf(v) === Object.prototype &&
+            Object.keys(v).every(
+                (id) =>
+                    isKnownNetworkId(id) &&
+                    everyEntry(v[id], (t) => isRecord(t) && isText(t.address)),
+            ),
+    },
     {
         field: "allowedSites",
         kind: KIND.ENTRIES,

tests/trackedTokensPerNetwork.test.js

@@ -0,0 +1,189 @@
+// Tracked tokens are kept per network, and the two add-token screens offer the
+// bundled token list, which holds Ethereum Mainnet contracts, on Ethereum
+// Mainnet only (https://git.eeqj.de/sneak/AutistMask/issues/523), including on
+// the screen "Back" lands on after a switch made from the Settings gear. Driven
+// through the real popup over a stored profile; the same switch made by the
+// background is in tests/coldWorkerChainSwitch.test.js.
+
+const {
+    bootPopup,
+    cleanupPopup,
+    unversionedValidProfile,
+    TOKEN_ADDRESS,
+} = require("./support/popupBoot");
+
+const SEPOLIA_TOKEN = {
+    address: TOKEN_ADDRESS,
+    symbol: "TST",
+    decimals: 18,
+    name: "Test Token",
+};
+const MAINNET_TOKEN = {
+    address: "0x6B175474E89094C44Da98b954EedeAC495271d0F",
+    symbol: "DAI",
+    decimals: 18,
+    name: "Dai Stablecoin",
+};
+
+// Fake timers hold the timer of the flash message a switch ends with, which
+// would otherwise fire after cleanupPopup() has removed the page and throw.
+beforeEach(() => {
+    jest.useFakeTimers();
+});
+
+afterEach(() => {
+    cleanupPopup();
+    jest.useRealTimers();
+});
+
+// The popup reopened onto SettingsAddToken, on `networkId`.
+function bootOnAddToken(networkId, extra) {
+    return bootPopup(
+        unversionedValidProfile({
+            networkId,
+            currentView: "settings-addtoken",
+            ...extra,
+        }),
+    );
+}
+
+// The popup reopened onto AddressDetail on Ethereum Mainnet, with DAI tracked
+// there and TST tracked on Sepolia.
+function bootOnAddress() {
+    return bootPopup(
+        unversionedValidProfile({
+            currentView: "address",
+            selectedWallet: 0,
+            selectedAddress: 0,
+            trackedTokens: [MAINNET_TOKEN],
+            networkTrackedTokens: { sepolia: [SEPOLIA_TOKEN] },
+        }),
+    );
+}
+
+// Picks `networkId` in the Settings network selector, as the user does.
+async function chooseNetwork(boot, networkId) {
+    const select = boot.node("settings-network");
+    select.value = networkId;
+    for (const fn of select.listeners.change) await fn();
+    await boot.settle();
+}
+
+// The Settings gear, a switch to Sepolia, and Back.
+async function gearSwitchBack(boot) {
+    await boot.click("btn-settings");
+    expect(boot.visibleViews()).toEqual(["settings"]);
+    await chooseNetwork(boot, "sepolia");
+    await boot.click("btn-settings-back");
+}
+
+describe.each([
+    ["mainnet", false],
+    ["sepolia", true],
+])("on %s", (networkId, hidden) => {
+    test(`the common tokens are hidden: ${hidden}`, async () => {
+        const boot = await bootOnAddToken(networkId);
+        expect(boot.pageErrors).toEqual([]);
+        expect(boot.visibleViews()).toEqual(["settings-addtoken"]);
+        expect(boot.hidden("settings-addtoken-common")).toBe(hidden);
+
+        require("../src/popup/views/addToken").show();
+        expect(boot.visibleViews()).toEqual(["add-token"]);
+        expect(boot.hidden("add-token-common")).toBe(hidden);
+    });
+});
+
+test("a token added by contract address on Sepolia is tracked on Sepolia only", async () => {
+    const boot = await bootOnAddToken("sepolia", {
+        networkTrackedTokens: { mainnet: [MAINNET_TOKEN] },
+    });
+    const stored = () => boot.storage.read("autistmask");
+    const { lookupTokenInfo } = require("../src/shared/balances");
+    lookupTokenInfo.mockResolvedValueOnce({
+        symbol: SEPOLIA_TOKEN.symbol,
+        decimals: SEPOLIA_TOKEN.decimals,
+        name: SEPOLIA_TOKEN.name,
+    });
+
+    boot.node("settings-addtoken-address").value = TOKEN_ADDRESS;
+    await boot.click("btn-settings-addtoken-manual");
+
+    expect(lookupTokenInfo).toHaveBeenCalledWith(
+        TOKEN_ADDRESS,
+        expect.any(String),
+        "sepolia",
+        expect.anything(),
+    );
+    expect(stored().trackedTokens).toEqual([SEPOLIA_TOKEN]);
+
+    await chooseNetwork(boot, "mainnet");
+    expect(stored().networkId).toBe("mainnet");
+    expect(stored().trackedTokens).toEqual([MAINNET_TOKEN]);
+    const onMainnet = boot.node("settings-tracked-tokens").innerHTML;
+    expect(onMainnet).toContain("DAI");
+    expect(onMainnet).not.toContain("TST");
+
+    await chooseNetwork(boot, "sepolia");
+    expect(stored().networkId).toBe("sepolia");
+    expect(stored().trackedTokens).toEqual([SEPOLIA_TOKEN]);
+    const onSepolia = boot.node("settings-tracked-tokens").innerHTML;
+    expect(onSepolia).toContain("TST");
+    expect(onSepolia).not.toContain("DAI");
+});
+
+describe("Back after a switch from the Settings gear", () => {
+    test("SettingsAddToken no longer offers the common tokens", async () => {
+        const boot = await bootOnAddToken("mainnet");
+        expect(boot.hidden("settings-addtoken-common")).toBe(false);
+
+        await gearSwitchBack(boot);
+        expect(boot.visibleViews()).toEqual(["settings-addtoken"]);
+        expect(boot.hidden("settings-addtoken-common")).toBe(true);
+    });
+
+    test("AddressDetail lists the new network's tracked tokens", async () => {
+        const boot = await bootOnAddress();
+        expect(boot.node("address-balances").innerHTML).toContain("DAI");
+
+        await gearSwitchBack(boot);
+        expect(boot.visibleViews()).toEqual(["address"]);
+        const balances = boot.node("address-balances").innerHTML;
+        expect(balances).toContain("TST");
+        expect(balances).not.toContain("DAI");
+    });
+
+    // Neither can be rendered from saved state, so neither is landed on.
+    test.each([
+        ["btn-add-token", "add-token"],
+        ["btn-send", "send"],
+    ])("from over %s, it lands on AddressDetail", async (button, view) => {
+        const boot = await bootOnAddress();
+        await boot.click(button);
+        expect(boot.visibleViews()).toEqual([view]);
+
+        await gearSwitchBack(boot);
+        expect(boot.visibleViews()).toEqual(["address"]);
+        expect(boot.node("address-balances").innerHTML).not.toContain("DAI");
+    });
+
+    test("without a wallet, it lands on Welcome", async () => {
+        const boot = await bootPopup(undefined);
+        expect(boot.visibleViews()).toEqual(["welcome"]);
+
+        await gearSwitchBack(boot);
+        expect(boot.visibleViews()).toEqual(["welcome"]);
+    });
+
+    test("a later Back onto Settings keeps what was typed there", async () => {
+        const boot = await bootOnAddress();
+        await boot.click("btn-settings");
+        await chooseNetwork(boot, "sepolia");
+        boot.node("settings-rpc").value = "https://typed.example";
+
+        await boot.click("btn-settings-add-token");
+        expect(boot.visibleViews()).toEqual(["settings-addtoken"]);
+        await boot.click("btn-settings-addtoken-back");
+        expect(boot.visibleViews()).toEqual(["settings"]);
+        expect(boot.value("settings-rpc")).toBe("https://typed.example");
+    });
+});