fix: a V4 swap action not in the deployed shape is shown as not decoded (closes #358)

The four V4 swap actions are read only as the parameter structs deployed
on mainnet and Sepolia. ethers decoded the newer v4-periphery structs,
which add minHopPriceX36, as the deployed ones without an error, and the
newer multi-hop exact-in struct showed the offset of its hop-price array
as the swap amount. A decode now counts only when encoding it again gives
back the same bytes. When a swap action fails that, its step is listed as
"V4 Swap (could not be decoded)", and a token line left without a
currency reads "Unknown (could not be decoded)" rather than "not named in
the calldata". The README records both.

Model: opus-5-5

README.md

@@ -239,8 +239,12 @@ provide:
   `make check` stays non-mutating. Linting runs only in the container, because
   an ESLint result that depends on whichever ESLint the host happens to have is
   not a result, so docker is required to lint.
-- `script/fmt` — format all files (writes), on the host
-- `script/fmt-check` — check formatting (read-only), on the host
+- `script/fmt` — format all files (writes), on the host, with the `prettier`
+  that `script/bootstrap` installs in `node_modules/`; when that one is missing
+  it fails and says to run `script/bootstrap`, instead of using a `prettier`
+  from the `PATH`
+- `script/fmt-check` — check formatting (read-only), on the host, with the same
+  `prettier` and the same refusal
 - `script/check` — run `script/test`, `script/lint` and `script/fmt-check`
 - `script/check-censored` — assert the competitor name RULES.md bars appears
   nowhere in the working tree or under `dist/` outside its documented
@@ -1106,14 +1110,16 @@ read:
 
 The swap's `Token In` and `Token Out` lines name a currency, not an amount; each
 reads `Unknown (not named in the calldata)` when the decoder found no token for
-that side. An `UNWRAP_WETH` step makes `Token Out` ETH only when the output side
-is WETH, on mainnet or Sepolia, or when no step set the output side; a WETH
-`Min. received` figure then reads in ETH. Otherwise `Token Out` and
-`Min. received` keep the output side's own token and figure, whether the swap
-was paid in ETH or in a token: a V2 exact-out swap that buys USDC and then
-unwraps the WETH it did not spend shows USDC. The token permission warning on
-the signature screen has its own amount wording, including `Unknown`; the
-SignApproval section below describes it.
+that side, or `Unknown (could not be decoded)` instead when a V4 swap action in
+the transaction could not be read (see Transaction Decoding below). An
+`UNWRAP_WETH` step makes `Token Out` ETH only when the output side is WETH, on
+mainnet or Sepolia, or when no step set the output side; a WETH `Min. received`
+figure then reads in ETH. Otherwise `Token Out` and `Min. received` keep the
+output side's own token and figure, whether the swap was paid in ETH or in a
+token: a V2 exact-out swap that buys USDC and then unwraps the WETH it did not
+spend shows USDC. The token permission warning on the signature screen has its
+own amount wording, including `Unknown`; the SignApproval section below
+describes it.
 
 The swap's `Deadline` line is the router's deadline as a UTC date and time, e.g.
 `2026-02-27 08:25:51`. A JavaScript date reaches only to 275760-09-13 00:00:00
@@ -1641,12 +1647,6 @@ view would leave a wallet one click from deletion.
       the contract's own answer is read at signing time only to be compared with
       it, and a disagreement is a refusal rather than a preference for either
       value (`src/shared/transferAmount.js`)
-    - "Sign & Send" after the active network was switched in Settings while this
-      screen was open → nothing is signed; "The active network changed after
-      this transaction was reviewed, so it was not sent. Please go back and
-      review it again." in the errors box, no screen change. The transaction
-      carries the chain id of the network the screen was shown for, so it cannot
-      be signed for another
     - "Sign & Send" (wrong password) → "Wrong password." on the password error
       line, no screen change
     - "Back" → **Send**
@@ -2665,7 +2665,8 @@ plaintext list of anyone's domain names.
 When a dApp on a blocklisted domain requests a wallet connection, transaction
 approval, or signature, the approval popup displays a prominent red warning
 banner alerting the user. The domain checker matches exact hostnames and all
-parent domains (subdomain matching).
+parent domains (subdomain matching), and checks a hostname written with a
+trailing dot (`name.`) as `name`.
 
 #### Transaction Decoding
 
@@ -2691,7 +2692,11 @@ Currently supported:
   or recipient, and amount.
 - **Uniswap Universal Router**: `execute()` calls — shows swap direction (e.g.
   "Swap USDT → ETH"), token addresses, amounts, execution steps, and deadline.
-  Decodes Permit2, V2/V3/V4 swaps, wrap/unwrap, and balance checks.
+  Decodes Permit2, V2/V3/V4 swaps, wrap/unwrap, and balance checks. A V4 swap
+  action is read only in the parameter shape deployed on mainnet and Sepolia,
+  not in the newer one on `v4-periphery` `main`, which adds a `minHopPriceX36`
+  field. An action in any other shape is not read, and its step is listed as
+  `V4 Swap (could not be decoded)`.
 
 ### Non-Goals Forever
 

script/fmt

@@ -25,6 +25,13 @@ run_yarn() {
 
 main() {
     cd "$ROOT"
+    # Without the repo's own prettier, yarn runs whatever prettier is on
+    # the PATH, which may be a version that formats files differently.
+    if [ ! -x node_modules/.bin/prettier ]; then
+        echo "fmt: this repo's prettier is not installed in node_modules/," \
+            "so run script/bootstrap first." >&2
+        exit 1
+    fi
     echo "Formatting..."
     run_yarn run fmt
 }

script/fmt-check

@@ -26,6 +26,13 @@ run_yarn() {
 
 main() {
     cd "$ROOT"
+    # Without the repo's own prettier, yarn runs whatever prettier is on
+    # the PATH, which may be a version that formats files differently.
+    if [ ! -x node_modules/.bin/prettier ]; then
+        echo "fmt-check: this repo's prettier is not installed in" \
+            "node_modules/, so run script/bootstrap first." >&2
+        exit 1
+    fi
     echo "Checking formatting..."
     run_yarn run fmt-check
 }

src/background/index.js

@@ -633,8 +633,9 @@ function isExtensionSender(sender) {
 // had refused.
 //
 // TX and sign approvals do not decide here. They stay pending across a
-// disconnect — the user can reopen the toolbar popup — and are rejected by the
-// windows.onRemoved listener below.
+// disconnect. When their window closes, the windows.onRemoved listener below
+// rejects them, unless an approved attempt is still running, in which case
+// that attempt answers the page.
 runtime.onConnect.addListener((port) => {
     if (port.name.startsWith("approval:")) {
         const id = port.name.split(":")[1];
@@ -662,7 +663,9 @@ runtime.onConnect.addListener((port) => {
             const approval = pendingApprovals[id];
             if (approval) {
                 if (approval.type === "tx" || approval.type === "sign") {
-                    // Keep pending — user can reopen the toolbar popup
+                    // When its window closes, windows.onRemoved rejects it,
+                    // unless an approved attempt is still running, in which
+                    // case that attempt answers the page.
                     return;
                 }
                 settleApproval(id, { approved: false, remember: false });

src/popup/views/confirmTx.js

@@ -101,10 +101,6 @@ function show(txInfo) {
     feeStatus = FEE_PENDING;
     feeWei = null;
     maxSendFees = null;
-    // The network this screen is drawn for, and the only one it sends on:
-    // Settings can switch the active network while the screen is open. The
-    // wait, success and error screens label the amount by it too.
-    txInfo.chainId = currentNetwork().chainId;
 
     const isErc20 = txInfo.token !== "ETH";
     // The raw symbol is the price-table key; the capped one is what the
@@ -494,12 +490,7 @@ async function populateVerifyAndSend(connectedSigner, tx, fees = null) {
         );
         request = await contract.transfer.populateTransaction(tx.to, amount);
     }
-    // The chain id of the network the screen was drawn for: ethers refuses to
-    // populate it for a provider on any other network.
-    const populated = await connectedSigner.populateTransaction({
-        ...request,
-        chainId: tx.chainId,
-    });
+    const populated = await connectedSigner.populateTransaction(request);
     assertWithinCeilings(populated);
     return connectedSigner.sendTransaction(populated);
 }
@@ -556,17 +547,6 @@ function init(_ctx) {
             return;
         }
 
-        // Back from Settings only unhides this screen, still drawn for the
-        // network that was active when it was shown.
-        if (currentNetwork().chainId !== pendingTx.chainId) {
-            showSendError(
-                "The active network changed after this transaction was" +
-                    " reviewed, so it was not sent. Please go back and review" +
-                    " it again.",
-            );
-            return;
-        }
-
         const password = $("confirm-tx-password").value;
         if (!password) {
             showError(
@@ -595,6 +575,10 @@ function init(_ctx) {
         $("btn-confirm-send").disabled = true;
         $("btn-confirm-send").classList.add("text-muted");
 
+        // The network it is sent on. The wait, success and error screens
+        // label its amount by this, not by the network active when they draw.
+        pendingTx.chainId = currentNetwork().chainId;
+
         let tx;
         try {
             const signer = getSignerForAddress(

src/shared/phishingDomains.js

@@ -110,11 +110,14 @@ function hashListed(hash) {
  * Generate hostname variants for subdomain matching.
  * "sub.evil.com" yields ["sub.evil.com", "evil.com"].
  *
+ * A trailing dot is dropped: "evil.com." is the fully qualified spelling of
+ * "evil.com", and the browser loads the same site from either.
+ *
  * @param {string} hostname
  * @returns {string[]}
  */
 function hostnameVariants(hostname) {
-    const h = hostname.toLowerCase();
+    const h = hostname.toLowerCase().replace(/\.$/, "");
     const variants = [h];
     const parts = h.split(".");
     // Parent domains: a.b.c.d -> b.c.d, c.d

src/shared/uniswap.js

@@ -53,6 +53,11 @@ function formatAmount(raw, decimals) {
 // on a scale — not as a token name, and not as a quantity.
 const UNNAMED_CURRENCY = "Unknown (not named in the calldata)";
 
+// The same refusal when a V4 swap action could not be read (see
+// decodeExactly()). That action names both of its currencies, so saying the
+// calldata did not name one would be false.
+const UNDECODED_CURRENCY = "Unknown (could not be decoded)";
+
 // Explicit presence, never truthiness. Every gate in this file that guards a
 // decoded value goes through here: an address is never falsy once set, but an
 // amount of 0n is, and a gate that cannot tell a genuine zero from an absent
@@ -295,6 +300,24 @@ function v4ExactInAmount(raw) {
     return raw === 0n ? OPEN_DELTA : raw;
 }
 
+// The V4 swap actions are read only in the parameter structs V4Router has
+// deployed on mainnet and Sepolia. v4-periphery `main` has since added a
+// `minHopPriceX36` field to all four (`src/interfaces/IV4Router.sol`), and
+// reading a shape nobody has deployed would be guessing. ethers alone would
+// read the newer structs anyway: it takes whatever word sits where a
+// deployed field would be, ignores bytes left over, and holds back an error
+// in a field until that field is used. The newer multi-hop exact-in struct
+// then yields the offset of its hop-price array as `amountIn`. So a decode
+// counts only when encoding the result again gives back the same bytes;
+// otherwise this throws, and decodeV4Swap() marks the step as not decoded.
+function decodeExactly(types, data) {
+    const decoded = coder.decode(types, data);
+    if (coder.encode(types, decoded) !== data) {
+        throw new Error("Not in the deployed V4 parameter shape.");
+    }
+    return decoded;
+}
+
 // Decode V4_SWAP (command 0x10) input bytes.
 // The input is ABI-encoded as (bytes actions, bytes[] params).
 // We extract token addresses from SETTLE (input) and TAKE (output) sub-actions,
@@ -309,6 +332,10 @@ function decodeV4Swap(input) {
         let takeToken = null;
         let amountIn = null;
         let amountOutMin = null;
+        // Set when a swap action's parameters are not in the deployed shape
+        // (see decodeExactly()), so nothing was read from that action. SETTLE
+        // and TAKE may still name both currencies.
+        let swapUndecoded = false;
 
         for (let i = 0; i < actions.length; i++) {
             const actionId = actions[i];
@@ -337,7 +364,7 @@ function decodeV4Swap(input) {
                         //   tuple(address,uint24,int24,address,bytes)[] path,
                         //   uint128 amountIn, uint128 amountOutMin)
                         try {
-                            const s = coder.decode(
+                            const s = decodeExactly(
                                 [
                                     "tuple(address,tuple(address,uint24,int24,address,bytes)[],uint128,uint128)",
                                 ],
@@ -355,13 +382,13 @@ function decodeV4Swap(input) {
                                 amountOutMin = s[0][3];
                             }
                         } catch {
-                            // Fall through — SETTLE/TAKE will provide tokens
+                            swapUndecoded = true;
                         }
                     } else {
                         // ExactInputSingleParams: (tuple(address,address,uint24,int24,address) poolKey,
                         //   bool zeroForOne, uint128 amountIn, uint128 amountOutMin, bytes hookData)
                         try {
-                            const s = coder.decode(
+                            const s = decodeExactly(
                                 [
                                     "tuple(tuple(address,address,uint24,int24,address),bool,uint128,uint128,bytes)",
                                 ],
@@ -384,7 +411,7 @@ function decodeV4Swap(input) {
                                 amountOutMin = s[0][3];
                             }
                         } catch {
-                            // Fall through
+                            swapUndecoded = true;
                         }
                     }
                 } else if (
@@ -393,7 +420,7 @@ function decodeV4Swap(input) {
                 ) {
                     if (actionId === V4_SWAP_EXACT_OUT) {
                         try {
-                            const s = coder.decode(
+                            const s = decodeExactly(
                                 [
                                     "tuple(address,tuple(address,uint24,int24,address,bytes)[],uint128,uint128)",
                                 ],
@@ -405,11 +432,11 @@ function decodeV4Swap(input) {
                                 settleToken = path[path.length - 1][0];
                             }
                         } catch {
-                            // Fall through
+                            swapUndecoded = true;
                         }
                     } else {
                         try {
-                            const s = coder.decode(
+                            const s = decodeExactly(
                                 [
                                     "tuple(tuple(address,address,uint24,int24,address),bool,uint128,uint128,bytes)",
                                 ],
@@ -426,7 +453,7 @@ function decodeV4Swap(input) {
                                     ? poolKey[1]
                                     : poolKey[0];
                         } catch {
-                            // Fall through
+                            swapUndecoded = true;
                         }
                     }
                 }
@@ -440,6 +467,7 @@ function decodeV4Swap(input) {
             tokenOut: takeToken,
             amountIn,
             amountOutMin,
+            swapUndecoded,
         };
     } catch {
         return null;
@@ -465,6 +493,7 @@ function decode(data, toAddress, sources) {
         let minOutput = null;
         let hasUnwrapWeth = false;
         let hasV2ExactOut = false;
+        let swapUndecoded = false;
         const commandNames = [];
 
         // THE INVARIANT: an amount and the token it is counted in always come
@@ -568,6 +597,12 @@ function decode(data, toAddress, sources) {
                 if (cmdId === 0x10) {
                     const v4 = decodeV4Swap(inputs[i]);
                     if (v4) {
+                        // Without this, a swap action that went unread would
+                        // look like one that had nothing to show.
+                        if (v4.swapUndecoded) {
+                            swapUndecoded = true;
+                            commandNames[i] += " (could not be decoded)";
+                        }
                         setInputOnce(v4.tokenIn, v4.amountIn);
                         // Always update output: last swap step wins. A step
                         // that carries the Min. received figure but decoded no
@@ -591,12 +626,13 @@ function decode(data, toAddress, sources) {
             }
         }
 
-        // Resolve token info. A null token on either side means the calldata
-        // named no currency for it; tokenInfo() refuses rather than calling it
-        // ETH. UNWRAP_WETH turns WETH into ETH, so it makes the output ETH
-        // when the output side is WETH, or when no step set the output side.
-        // Any other output keeps its own token and figure: a swap that buys
-        // USDC and then unwraps the WETH it did not spend receives USDC.
+        // Resolve token info. A null token on either side means no step that
+        // was read named a currency for it; tokenInfo() refuses rather than
+        // calling it ETH. UNWRAP_WETH turns WETH into ETH, so it makes the
+        // output ETH when the output side is WETH, or when no step set the
+        // output side. Any other output keeps its own token and figure: a swap
+        // that buys USDC and then unwraps the WETH it did not spend receives
+        // USDC.
         const outputIsWeth =
             present(outputToken) &&
             WETH_ADDRESSES.includes(outputToken.toLowerCase());
@@ -640,7 +676,10 @@ function decode(data, toAddress, sources) {
             // rather than going missing or naming a token by default. Same
             // wording as the Token Out refusal below: the two sides of this
             // screen must not describe the same condition in two ways.
-            details.push({ label: "Token In", value: UNNAMED_CURRENCY });
+            details.push({
+                label: "Token In",
+                value: swapUndecoded ? UNDECODED_CURRENCY : UNNAMED_CURRENCY,
+            });
         }
 
         if (present(inputAmount)) {
@@ -703,7 +742,10 @@ function decode(data, toAddress, sources) {
             // rather than going missing or naming a token by default, and a
             // Min. received figure below it is never attached to a token the
             // calldata did not state.
-            details.push({ label: "Token Out", value: UNNAMED_CURRENCY });
+            details.push({
+                label: "Token Out",
+                value: swapUndecoded ? UNDECODED_CURRENCY : UNNAMED_CURRENCY,
+            });
         }
 
         if (present(minOutput)) {

tests/confirmTxNetworkSwitch.test.js

@@ -1,259 +0,0 @@
-// A transfer is sent only on the network its confirmation screen was drawn for
-// (https://git.eeqj.de/sneak/AutistMask/issues/524).
-//
-// Settings is reachable from the confirmation screen, and Back from it only
-// unhides the screen, still labelled for the network it was drawn for. Sign &
-// Send used to take the network at the moment of the click, so 1 SepoliaETH
-// reviewed on Sepolia went out as 1 ETH on mainnet once mainnet was chosen in
-// Settings in between.
-//
-// Driven through the real confirmation screen, signer and chain switch, with
-// only the node and the DOM stubbed. The stub node is on the network its
-// provider was built for, so a broadcast records the network it went to.
-
-"use strict";
-
-// The signed transactions the stub node was handed, with its network's chain id.
-const mockNode = { broadcast: [] };
-
-jest.mock("ethers", () => {
-    const actual = jest.requireActual("ethers");
-    class StubProvider {
-        constructor(url, network) {
-            this.network = network;
-        }
-        async getNetwork() {
-            return this.network;
-        }
-        async getFeeData() {
-            return {
-                maxFeePerGas: 20000000000n,
-                maxPriorityFeePerGas: 1000000000n,
-                gasPrice: 10000000000n,
-            };
-        }
-        async estimateGas() {
-            return 21000n;
-        }
-        async getCode() {
-            return "0x";
-        }
-        async getTransactionCount() {
-            return 1;
-        }
-        async lookupAddress() {
-            return null;
-        }
-        async broadcastTransaction(signed) {
-            mockNode.broadcast.push({ chainId: this.network.chainId, signed });
-            return { hash: "0x" + "ab".repeat(32) };
-        }
-    }
-    return { ...actual, JsonRpcProvider: StubProvider };
-});
-
-jest.mock("../src/shared/log", () => ({
-    log: {
-        debugf: () => {},
-        infof: () => {},
-        warnf: () => {},
-        errorf: () => {},
-    },
-    debugFetch: jest.fn(async () => ({
-        ok: true,
-        status: 200,
-        json: async () => ({ items: [] }),
-    })),
-    urlOrigin: () => "",
-    setRuntimeDebug: () => {},
-    isDebug: () => false,
-}));
-
-// The wait screen polls for a receipt; these tests stop at the broadcast.
-jest.mock("../src/popup/views/txStatus", () => ({
-    showWait: jest.fn(),
-    showError: jest.fn(),
-}));
-
-global.fetch = jest.fn(() => {
-    throw new Error("tests must not perform network requests");
-});
-
-const { makeStorageStub } = require("./support/storageStub");
-global.chrome = { storage: makeStorageStub(), runtime: { sendMessage() {} } };
-
-// A stub DOM: every id resolves to a recording element.
-const elements = new Map();
-
-function makeEl(id) {
-    const handlers = new Map();
-    return {
-        id,
-        textContent: "",
-        innerHTML: "",
-        value: "",
-        disabled: false,
-        style: {},
-        dataset: {},
-        classList: {
-            add() {},
-            remove() {},
-            toggle() {},
-            contains: () => false,
-        },
-        handlers,
-        addEventListener(name, fn) {
-            handlers.set(name, fn);
-        },
-        querySelectorAll: () => [],
-        querySelector: () => null,
-        remove() {},
-        focus() {},
-    };
-}
-
-global.document = {
-    getElementById(id) {
-        if (!elements.has(id)) elements.set(id, makeEl(id));
-        return elements.get(id);
-    },
-    createElement: (tag) => makeEl(tag),
-    body: { prepend() {}, appendChild() {} },
-    addEventListener() {},
-};
-global.navigator = { clipboard: { writeText() {} } };
-
-const { BaseWallet, Transaction, Wallet } = require("ethers");
-const { encryptWithPassword } = require("../src/shared/vault");
-const { state, loadState } = require("../src/shared/state");
-const { onChainSwitch } = require("../src/shared/chainSwitch");
-const { NETWORKS } = require("../src/shared/networks");
-const txStatus = require("../src/popup/views/txStatus");
-const confirmTx = require("../src/popup/views/confirmTx");
-
-const PRIVATE_KEY = "0x" + "11".repeat(32);
-const HOLDER = new Wallet(PRIVATE_KEY).address;
-const RECIPIENT = "0xC0FfEE0000000000000000000000000000c0fFEe";
-const PASSWORD = "correct horse battery staple";
-
-function el(id) {
-    return global.document.getElementById(id);
-}
-
-let encryptedSecret;
-let signTransaction;
-
-beforeAll(async () => {
-    await loadState();
-    encryptedSecret = await encryptWithPassword(PRIVATE_KEY, PASSWORD);
-});
-
-beforeEach(() => {
-    elements.clear();
-    mockNode.broadcast = [];
-    txStatus.showWait.mockClear();
-    txStatus.showError.mockClear();
-    signTransaction = jest.spyOn(BaseWallet.prototype, "signTransaction");
-});
-
-afterEach(() => {
-    signTransaction.mockRestore();
-});
-
-// Show the confirmation screen for 1 of the native token on `networkId`, as
-// Review on the Send screen does, with its fee estimate settled.
-async function review(networkId) {
-    await onChainSwitch(networkId);
-    state.wallets = [
-        {
-            type: "key",
-            name: "Wallet 1",
-            encryptedSecret,
-            addresses: [{ address: HOLDER, balance: "5.0" }],
-        },
-    ];
-    state.selectedWallet = 0;
-    state.selectedAddress = 0;
-    confirmTx.init({});
-    confirmTx.show({
-        from: HOLDER,
-        to: RECIPIENT,
-        ensName: null,
-        amount: "1",
-        token: "ETH",
-        balance: "5.0",
-        tokenSymbol: null,
-        tokenBalance: null,
-        tokenDecimals: null,
-        max: false,
-    });
-    for (let i = 0; i < 10; i++) await new Promise((r) => setTimeout(r, 0));
-}
-
-async function signAndSend() {
-    el("confirm-tx-password").value = PASSWORD;
-    await el("btn-confirm-send").handlers.get("click")();
-}
-
-test("a transfer reviewed on Sepolia and sent goes out on Sepolia", async () => {
-    await review("sepolia");
-    expect(el("confirm-type").textContent).toBe("Native SepoliaETH transfer");
-    expect(el("btn-confirm-send").disabled).toBe(false);
-    await signAndSend();
-    expect(mockNode.broadcast).toHaveLength(1);
-    expect(mockNode.broadcast[0].chainId).toBe(11155111n);
-    expect(Transaction.from(mockNode.broadcast[0].signed).chainId).toBe(
-        11155111n,
-    );
-    expect(txStatus.showWait).toHaveBeenCalledTimes(1);
-});
-
-describe.each([
-    ["sepolia", "mainnet", "SepoliaETH"],
-    ["mainnet", "sepolia", "ETH"],
-])(
-    "a transfer reviewed on %s, with %s chosen in Settings before Sign & Send",
-    (reviewedOn, switchedTo, symbol) => {
-        test("is neither signed nor sent, and the screen says why", async () => {
-            await review(reviewedOn);
-            expect(el("confirm-type").textContent).toBe(
-                "Native " + symbol + " transfer",
-            );
-            // Settings' network select, then Back, which only unhides the
-            // screen as it was drawn.
-            await onChainSwitch(switchedTo);
-            await signAndSend();
-
-            expect(signTransaction).not.toHaveBeenCalled();
-            expect(mockNode.broadcast).toEqual([]);
-            expect(txStatus.showWait).not.toHaveBeenCalled();
-            expect(txStatus.showError).not.toHaveBeenCalled();
-            expect(el("confirm-errors").style.visibility).toBe("visible");
-            expect(el("confirm-errors").innerHTML).toContain(
-                "The active network changed after this transaction was" +
-                    " reviewed, so it was not sent. Please go back and review" +
-                    " it again.",
-            );
-        });
-    },
-);
-
-// The check in the click handler tells the user; the send itself carries the
-// chain id the screen was drawn for, so a signer on another network's node
-// cannot sign it even if the network changes after that check.
-test("the send is refused by a signer on another network's node", async () => {
-    const { getProvider } = require("../src/shared/balances");
-    const signer = new Wallet(PRIVATE_KEY).connect(
-        getProvider("https://rpc.example.invalid", "mainnet"),
-    );
-    await expect(
-        confirmTx.populateVerifyAndSend(signer, {
-            token: "ETH",
-            to: RECIPIENT,
-            amount: "1",
-            chainId: NETWORKS.sepolia.chainId,
-        }),
-    ).rejects.toThrow("transaction chainId mismatch");
-    expect(signTransaction).not.toHaveBeenCalled();
-    expect(mockNode.broadcast).toEqual([]);
-});

tests/phishingDomains.test.js

@@ -89,6 +89,12 @@ describe("vendored blocklist", () => {
         expect(isPhishingDomain(LISTED[0].toUpperCase())).toBe(true);
     });
 
+    test("a hostname ending in a dot is the same host", () => {
+        expect(isPhishingDomain(LISTED[1] + ".")).toBe(true);
+        expect(isPhishingDomain("wallet." + LISTED[1] + ".")).toBe(true);
+        expect(isPhishingDomain(CLEAN[0] + ".")).toBe(false);
+    });
+
     test("returns false for an empty or missing hostname", () => {
         expect(isPhishingDomain("")).toBe(false);
         expect(isPhishingDomain(null)).toBe(false);
@@ -133,6 +139,13 @@ describe("hostnameVariants", () => {
     test("lowercases hostnames", () => {
         expect(hostnameVariants("Evil.COM")).toEqual(["evil.com"]);
     });
+
+    test("drops the trailing dot of a fully qualified hostname", () => {
+        expect(hostnameVariants("sub.evil.com.")).toEqual([
+            "sub.evil.com",
+            "evil.com",
+        ]);
+    });
 });
 
 describe("domain hashing", () => {

tests/uniswap.test.js

@@ -163,6 +163,110 @@ function encodeV4ExactInSingle(currency0, currency1, amountIn, amountOutMin) {
     );
 }
 
+// Each V4 swap action's parameters in two shapes: the struct V4Router has
+// deployed on mainnet and Sepolia, and the one v4-periphery `main` has since
+// moved to, which adds a `minHopPriceX36` field. Each swaps WETH for USDC.
+const POOL_KEY = "tuple(address,address,uint24,int24,address)";
+const PATH_KEY = "tuple(address,uint24,int24,address,bytes)";
+const WETH_USDC_POOL = [WETH_ADDR, USDC_ADDR, 100, 1, ZERO_ADDR];
+const ONE_WETH = 1000000000000000000n;
+const V4_SWAP_ACTION_SHAPES = [
+    {
+        action: "SWAP_EXACT_IN_SINGLE",
+        id: 0x06,
+        deployed: coder.encode(
+            [`tuple(${POOL_KEY},bool,uint128,uint128,bytes)`],
+            [[WETH_USDC_POOL, true, ONE_WETH, 990000n, "0x"]],
+        ),
+        newer: coder.encode(
+            [`tuple(${POOL_KEY},bool,uint128,uint128,uint256,bytes)`],
+            [[WETH_USDC_POOL, true, ONE_WETH, 990000n, 0n, "0x"]],
+        ),
+    },
+    {
+        action: "SWAP_EXACT_IN",
+        id: 0x07,
+        deployed: coder.encode(
+            [`tuple(address,${PATH_KEY}[],uint128,uint128)`],
+            [
+                [
+                    WETH_ADDR,
+                    [[USDC_ADDR, 100, 1, ZERO_ADDR, "0x"]],
+                    ONE_WETH,
+                    990000n,
+                ],
+            ],
+        ),
+        newer: coder.encode(
+            [`tuple(address,${PATH_KEY}[],uint256[],uint128,uint128)`],
+            [
+                [
+                    WETH_ADDR,
+                    [[USDC_ADDR, 100, 1, ZERO_ADDR, "0x"]],
+                    [],
+                    ONE_WETH,
+                    990000n,
+                ],
+            ],
+        ),
+    },
+    {
+        action: "SWAP_EXACT_OUT_SINGLE",
+        id: 0x08,
+        deployed: coder.encode(
+            [`tuple(${POOL_KEY},bool,uint128,uint128,bytes)`],
+            [[WETH_USDC_POOL, true, 990000n, ONE_WETH, "0x"]],
+        ),
+        newer: coder.encode(
+            [`tuple(${POOL_KEY},bool,uint128,uint128,uint256,bytes)`],
+            [[WETH_USDC_POOL, true, 990000n, ONE_WETH, 0n, "0x"]],
+        ),
+    },
+    {
+        action: "SWAP_EXACT_OUT",
+        id: 0x09,
+        deployed: coder.encode(
+            [`tuple(address,${PATH_KEY}[],uint128,uint128)`],
+            [
+                [
+                    USDC_ADDR,
+                    [[WETH_ADDR, 100, 1, ZERO_ADDR, "0x"]],
+                    990000n,
+                    ONE_WETH,
+                ],
+            ],
+        ),
+        newer: coder.encode(
+            [`tuple(address,${PATH_KEY}[],uint256[],uint128,uint128)`],
+            [
+                [
+                    USDC_ADDR,
+                    [[WETH_ADDR, 100, 1, ZERO_ADDR, "0x"]],
+                    [],
+                    990000n,
+                    ONE_WETH,
+                ],
+            ],
+        ),
+    },
+];
+
+// Helper: execute() with one V4_SWAP step holding the swap action, then
+// SETTLE of WETH and TAKE of USDC.
+function v4SwapCalldata(actionId, swapParams) {
+    return buildExecute(
+        "0x10",
+        [
+            encodeV4Swap(new Uint8Array([actionId, V4_SETTLE_ID, V4_TAKE_ID]), [
+                swapParams,
+                encodeV4Settle(WETH_ADDR),
+                encodeV4Take(USDC_ADDR),
+            ]),
+        ],
+        9999999999n,
+    );
+}
+
 function detail(result, label) {
     return result.details.find((d) => d.label === label);
 }
@@ -203,11 +307,83 @@ describe("uniswap decoder", () => {
             result.details.find((d) => d.label === "Min. received").value,
         ).toBe("0.0002 ETH");
 
+        // Real mainnet calldata is in the deployed shape, so its V4 step is
+        // not said to be undecoded.
         const steps = result.details.find((d) => d.label === "Steps");
-        expect(steps.value).toContain("Permit2 Permit");
-        expect(steps.value).toContain("V4 Swap");
+        expect(steps.value).toBe("Permit2 Permit → V4 Swap");
     });
 
+    test.each(V4_SWAP_ACTION_SHAPES)(
+        "a V4 $action in the deployed shape is read",
+        ({ id, deployed }) => {
+            const result = uniswap.decode(
+                v4SwapCalldata(id, deployed),
+                ROUTER_ADDR,
+            );
+            expect(detail(result, "Steps").value).toBe("V4 Swap");
+        },
+    );
+
+    // https://git.eeqj.de/sneak/AutistMask/issues/358 — before it, all four
+    // newer structs decoded as the deployed ones without an error, and the
+    // newer SWAP_EXACT_IN showed the offset of its hop-price array as Amount
+    // ("0.0000000000000004 WETH") and its amountIn as Min. received.
+    test.each(V4_SWAP_ACTION_SHAPES)(
+        "a V4 $action in the newer periphery shape is shown as not decoded",
+        ({ id, newer }) => {
+            const result = uniswap.decode(
+                v4SwapCalldata(id, newer),
+                ROUTER_ADDR,
+            );
+            expect(detail(result, "Amount")).toBeUndefined();
+            expect(detail(result, "Min. received")).toBeUndefined();
+            expect(detail(result, "Steps").value).toBe(
+                "V4 Swap (could not be decoded)",
+            );
+            // SETTLE and TAKE keep their own shape and still name both sides.
+            expect(detail(result, "Token In").address).toBe(WETH_ADDR);
+            expect(detail(result, "Token Out").address).toBe(USDC_ADDR);
+        },
+    );
+
+    // The decoder does not read SETTLE_ALL or TAKE_ALL, so here only the
+    // unread swap action names the currencies. The token lines must not say
+    // the calldata did not name them.
+    test.each(V4_SWAP_ACTION_SHAPES)(
+        "a V4 $action in the newer shape, then SETTLE_ALL and TAKE_ALL, says both tokens could not be decoded",
+        ({ id, newer }) => {
+            const data = buildExecute(
+                "0x10",
+                [
+                    // 0x0c is SETTLE_ALL (currency, maxAmount), 0x0f is
+                    // TAKE_ALL (currency, minAmount).
+                    encodeV4Swap(new Uint8Array([id, 0x0c, 0x0f]), [
+                        newer,
+                        coder.encode(
+                            ["address", "uint256"],
+                            [WETH_ADDR, ONE_WETH],
+                        ),
+                        coder.encode(
+                            ["address", "uint256"],
+                            [USDC_ADDR, 990000n],
+                        ),
+                    ]),
+                ],
+                9999999999n,
+            );
+            const result = uniswap.decode(data, ROUTER_ADDR);
+            expect(detail(result, "Steps").value).toBe(
+                "V4 Swap (could not be decoded)",
+            );
+            expect(detail(result, "Token In").value).toBe(
+                "Unknown (could not be decoded)",
+            );
+            expect(detail(result, "Token Out").value).toBe(
+                "Unknown (could not be decoded)",
+            );
+        },
+    );
+
     test("decodes V2_SWAP_EXACT_IN with known tokens", () => {
         const data = buildExecute(
             "0x08", // V2_SWAP_EXACT_IN
@@ -548,9 +724,11 @@ describe("uniswap decoder", () => {
         const result = uniswap.decode(data, ROUTER_ADDR);
         expect(result).not.toBeNull();
 
+        // The V4 swap action's parameters are empty, so that step is said to
+        // be undecoded.
         const steps = result.details.find((d) => d.label === "Steps");
         expect(steps.value).toBe(
-            "Permit2 Permit \u2192 V4 Swap \u2192 Unwrap WETH",
+            "Permit2 Permit \u2192 V4 Swap (could not be decoded) \u2192 Unwrap WETH",
         );
     });
 

tests/uniswapUndeterminedTokenIn.test.js

@@ -97,7 +97,11 @@ describe("an execute() whose input currency never decoded", () => {
         ]);
 
     test("says the input token is unknown instead of naming ETH", () => {
-        expect(detail(data(), "Token In").value).toBe(REFUSAL);
+        // The swap action that would name it could not be read, so the line
+        // says that rather than REFUSAL's "not named in the calldata".
+        expect(detail(data(), "Token In").value).toBe(
+            "Unknown (could not be decoded)",
+        );
     });
 
     test("keeps a Token In line, so the screen never omits what is paid", () => {