test: drive ConfirmTx in the e2e suite, gate assertion included (closes #238)

The screen that decides what gets signed had no automated coverage of its
own behaviour: no unit tests, and the e2e suite never reached it. The
arithmetic underneath is well covered in src/shared/txValidation.js; the
gap was the wiring — which number reaches the gate, when the gate re-runs,
what the fee block renders, and whether Send is enabled.

The confirmation screen quotes the fee ESTIMATE (gasLimit * gasPrice) and
gates on the fee RESERVE (gasLimit * maxFeePerGas). Reading the quoted
number instead was issue #154, and until now that was correct by reading
only — a mutant swapping the two passed the whole suite. It no longer
does: two of the new tests fail on it, one per transaction type.

The harness gains a funded-balance fixture to make any of this reachable.
tests/e2e/network.js now serves a configurable ETH balance, an ERC-20
holding, a latest block with a baseFeePerGas (without which ethers has no
maxFeePerGas and the reserve and the estimate collapse into one number),
and decimals() for the stub token. It can also refuse a gas estimate, and
hold one open so the pending state can be observed rather than raced.

Nine tests, over both the native ETH and the ERC-20 path: Send disabled
while the estimate is pending, enabled once it lands, the fee block
quoting both numbers, the distinct message for an estimate that failed,
refusal for a send past the balance, refusal for a send the reserve does
not cover, and the view height constant across every one of those
transitions.

Driving a failure path means provoking the console.error the code is
supposed to emit, which the harness fails a run on. ErrorCollector gains
expect(): it consumes exactly one matching record, and a declaration
nothing matched fails its test just as an undeclared error does, so it
cannot be used to silence anything. Both halves of that were verified by
running the suite against a deliberately wrong pattern.

.dockerignore

@@ -1,4 +1,6 @@
-.git
+# .git is deliberately NOT excluded: build.js shells out to `git rev-parse` for
+# build-info stamping and the Dockerfile runs `make build`, so excluding it
+# would make every built extension report commitHash "unknown".
 node_modules
 .DS_Store
 dist

Makefile

@@ -1,4 +1,4 @@
-.PHONY: bootstrap setup install test lint fmt fmt-check check docker hooks build clean dev
+.PHONY: bootstrap setup install test test-e2e lint fmt fmt-check check docker hooks build build-debug verify-build clean dev
 
 # Standard targets are thin shims; the implementations live in script/
 # per the scripts-to-rule-them-all pattern (see the Entrypoints section
@@ -11,11 +11,15 @@ setup:
 	@script/setup
 
 install:
-	@yarn install
+	@yarn install --frozen-lockfile
 
 test:
 	@script/test
 
+# Browser end-to-end suite. Requires docker; not part of check.
+test-e2e:
+	@script/test-e2e
+
 lint:
 	@script/lint
 
@@ -37,6 +41,20 @@ hooks:
 build:
 	@echo "Building extension..."
 	@yarn run build 2>&1
+	@script/verify-build
+
+# Development-only build: enables the red DEBUG / INSECURE banner and makes
+# the hardcoded test recovery phrase the output of wallet creation. Never
+# distribute the artifacts this produces.
+build-debug:
+	@echo "Building extension (DEBUG)..."
+	@AUTISTMASK_DEBUG=1 yarn run build 2>&1
+	@AUTISTMASK_DEBUG=1 script/verify-build
+
+# Assert the compiled DEBUG state of the bundles already in dist/. Runs at
+# the end of build and build-debug; separate target for re-running it alone.
+verify-build:
+	@script/verify-build
 
 clean:
 	@rm -rf dist/

TODO.md

@@ -1,33 +1,180 @@
 # Workflow
 
-- branch (from `main`)
-- do the work in Next Step
-- move Next Step to the top of Completed Steps
-- move the top item of Future Steps into Next Step
-- commit (`TODO.md` changes in the same commit as the work)
-- merge to `main` if the branch is not protected, otherwise open a PR
-- push
+- `git pull` `next` and cut a branch from it — one branch per issue, named
+  `issue-<N>-<slug>`. Never branch from `main`.
+- Do the work as one commit whose title ends with ` (closes #N)`, with the
+  `TODO.md` update in that same commit.
+- Move Next Step to the top of Completed Steps; move the top item of Future
+  Steps into Next Step.
+- Run `make fmt`, then `make check`. A feature branch may be red; `next` and
+  `main` may not.
+- Rebase onto current `next` immediately before pushing — other branches land on
+  `next` continuously — and re-run `make check` after resolving, because a clean
+  textual merge can still break the build.
+- Push the branch and open one PR per issue with base `next`. Never base `main`.
+- An independent reviewer who did not write the change gates the merge. On a
+  passed review the PR is squash-merged into `next`.
+- `next` is the branch for the next milestone. It is kept green and mergeable to
+  `main` at any moment, without notice.
+- `main` receives exactly one PR per milestone, from `next`. Releases are tagged
+  from `main`.
 
 # Status
 
-pre-1.0. Tagged v0.1.0 on 2026-02-27. Active development on branch
-feat/issue-144-settings-about (another agent working as of 2026-07-06). Full
-policy file set present; make check on main not verified.
+pre-1.0, working towards the 1.0.0 milestone. Tagged v0.1.0 on 2026-02-27. The
+milestone is in flight on `next`; its `next` -> `main` PR is
+[#190](https://git.eeqj.de/sneak/AutistMask/pulls/190). `make check` verified
+green on `next` at `e9fa8be` on 2026-08-10, and `make build` produces
+`dist/chrome/` and `dist/firefox/` with every bundle verified to have `DEBUG`
+compiled off.
+
+The backlog lives on the
+[Gitea tracker](https://git.eeqj.de/sneak/AutistMask/issues), which is
+authoritative; this file does not duplicate it. Full policy file set present. A
+real-browser end-to-end suite (`make test-e2e`) now sits alongside `make check`,
+which cannot see a runtime `ReferenceError` in a popup view.
 
 # Next Step
 
-Land feat/issue-144-settings-about: finish the settings About well (build info,
-app name and repo link, release date, version click easter egg, git info derived
-inside Docker), resolve the untracked scripts/ directory (commit or gitignore),
-get review, merge to main.
+Land [#152](https://git.eeqj.de/sneak/AutistMask/issues/152): add ESLint to
+`script/lint`. `make check` is `prettier --check` only today and cannot catch
+undefined identifiers, which is how
+[#150](https://git.eeqj.de/sneak/AutistMask/issues/150) and
+[#151](https://git.eeqj.de/sneak/AutistMask/issues/151) shipped.
 
 # Completed Steps
 
+- 2026-08-12: The transaction confirmation screen has browser coverage. The
+  end-to-end suite reaches ConfirmTx for both the native ETH and the ERC-20 path
+  off a funded-balance fixture, and asserts the pending, funded, over-balance
+  and estimate-failed states, the fee block quoting the estimate and the reserve
+  separately, and a constant view height across every one of those transitions.
+  The load-bearing assertion is that the spend gate reads the reserve and not
+  the displayed estimate: swapping the two fails the suite
+  ([#238](https://git.eeqj.de/sneak/AutistMask/issues/238)).
+- 2026-08-12: An xprv wallet already in storage that was imported from a
+  non-master key is detected from the depth of its stored `xpub`, explained in
+  the wallet list, and blocked from signing, sending and private-key export
+  instead of throwing on the send screen
+  ([#234](https://git.eeqj.de/sneak/AutistMask/issues/234)).
+- 2026-08-12: An unreported `holders_count` is now parsed as `null` rather than
+  `0`, so the low-holder rule declines to judge an unknown count instead of
+  hiding a legitimate token as spam, in both the transaction history and the
+  Send token selector ([#230](https://git.eeqj.de/sneak/AutistMask/issues/230)).
+- 2026-08-12: Bundled token list documentation no longer states a count. The
+  four "top 250" claims in `README.md` and the "roughly 500" claim in
+  `docs/README.md` are replaced with a description of how the list is actually
+  selected — a point-in-time CoinGecko snapshot of the highest-market-cap
+  Ethereum mainnet ERC-20s — with `TOKENS` in `src/shared/tokenList.js` named as
+  the authoritative set
+  ([#239](https://git.eeqj.de/sneak/AutistMask/issues/239)).
+- 2026-08-11: libsodium runs on WebAssembly in the shipped builds —
+  `'wasm-unsafe-eval'` added to both manifest CSPs after measuring the wasm2js
+  fallback at 20x the Argon2id cost, pinned in both directions by
+  `tests/manifest.test.js` and observed in the real popup by the e2e suite
+  ([#182](https://git.eeqj.de/sneak/AutistMask/issues/182)).
+- 2026-08-11: Known-symbol spoof verification became a Settings toggle
+  (`hideSpoofedSymbols`), on by default, governing the transaction-history
+  filter and the fraud-contract learning it feeds
+  ([#176](https://git.eeqj.de/sneak/AutistMask/issues/176)).
+- 2026-08-11: `script/verify-build` now walks `dist/` NUL-delimited and asserts
+  `dist/` is a real directory, so a path with a trailing space or a newline can
+  no longer carry a debug marker past the unlisted-bundle check
+  ([#223](https://git.eeqj.de/sneak/AutistMask/issues/223)).
+- 2026-08-11: UTC Timestamps checkbox moved from the Token Spam Protection well
+  into Display, next to the theme selector
+  ([#212](https://git.eeqj.de/sneak/AutistMask/issues/212)).
+- 2026-08-11: Network fee counted in the confirmation-screen balance check for
+  both ETH and ERC-20 sends, reserving what the node actually charges a type-2
+  transaction, with the arithmetic in a pure, unit-tested
+  `src/shared/txValidation.js`
+  ([#154](https://git.eeqj.de/sneak/AutistMask/issues/154)).
+- 2026-08-11: A dust threshold of `0` now means "hide nothing" instead of
+  falling back to the 100,000 gwei default, and every address comparison in
+  `src/shared/transactions.js` goes through one case-normalising helper so a
+  checksummed genuine contract is no longer read as a spoof
+  ([#179](https://git.eeqj.de/sneak/AutistMask/issues/179)).
+- 2026-08-11: Password-gated recovery phrase display for HD wallets, reached
+  from the wallet row in Settings, wiped on leaving the screen and excluded from
+  the views the popup can reopen onto
+  ([#161](https://git.eeqj.de/sneak/AutistMask/issues/161)).
+- 2026-08-11: Extended-key import hardened — the base58 checksum is now enforced
+  on every xprv and xpub, and a non-master key is refused with an explanation
+  instead of being derived beneath
+  ([#210](https://git.eeqj.de/sneak/AutistMask/issues/210)).
+- 2026-08-11: the balance refresh and the 24-hour phishing list refresh moved
+  from `setInterval` to the extension alarms API, with the phishing delta and
+  its fetch timestamps persisted to extension storage, so neither job dies with
+  the MV3 service worker. Each job's freshness guard was decoupled from its
+  alarm period at the same time — timed to the period, a guard vetoes its own
+  scheduled tick and halves the real refresh rate
+  ([#158](https://git.eeqj.de/sneak/AutistMask/issues/158)).
+- 2026-08-11: Policy compliance sweep — conditional verbose test rerun, local
+  Tailwind binary instead of `npx`, `--frozen-lockfile` on `make install`, and
+  the Makefile-only targets documented in the README
+  ([#166](https://git.eeqj.de/sneak/AutistMask/issues/166)).
+- 2026-08-11: `script/verify-build` diagnostics corrected: the both-markers
+  message now states what is and is not proven, an unreadable bundle is
+  diagnosed as an I/O fault rather than as changed output, the `*.js` assumption
+  lives only in `build.js`, and the unlisted-bundle scan hard-fails when it
+  cannot enumerate `dist/`
+  ([#180](https://git.eeqj.de/sneak/AutistMask/issues/180)).
+- 2026-08-11: Known-answer test coverage for the crypto core — BIP-39/BIP-32
+  derivation in `wallet.js` and the Argon2id vault in `vault.js`
+  ([#159](https://git.eeqj.de/sneak/AutistMask/issues/159)).
+- 2026-08-11: Three `README.md` claims corrected against the code — blocklist
+  attribution, token-display rule, navigation model
+  ([#213](https://git.eeqj.de/sneak/AutistMask/issues/213)).
+- 2026-08-11: README Screen Map rebuilt from the code — every screen, element
+  and transition re-verified against `src/popup/`
+  ([#164](https://git.eeqj.de/sneak/AutistMask/issues/164)).
+- 2026-08-11: `docs/README.md` rewritten against the code: no competitor names,
+  all five network destinations documented, password/Settings/Add Wallet
+  sections corrected ([#163](https://git.eeqj.de/sneak/AutistMask/issues/163)).
+- 2026-08-11: `loadState()` now derives `hasWallet` from the wallet list instead
+  of trusting the persisted flag, so a profile already saved inconsistent no
+  longer stays broken on every load
+  ([#195](https://git.eeqj.de/sneak/AutistMask/issues/195)).
+- 2026-08-11: Wallet deletion repairs its own state — `hasWallet` follows the
+  remaining wallets, the selection only moves when it was deleted, and the
+  active-address change is broadcast to connected sites
+  ([#156](https://git.eeqj.de/sneak/AutistMask/issues/156)).
+- 2026-08-11: One row per on-chain value movement in transaction history: the
+  merge moved into the pure `mergeTransactions` and the zero-ETH native side of
+  a plain ERC-20 transfer absorbed into its token row
+  ([#177](https://git.eeqj.de/sneak/AutistMask/issues/177)).
+- 2026-08-11: `TODO.md` Workflow rewritten to the branch-and-PR-per-issue model
+  on `next`, with Status and Next Step refreshed
+  ([#191](https://git.eeqj.de/sneak/AutistMask/issues/191)).
+- 2026-08-09: `DEBUG` became a build-time constant defaulting to off, injected
+  as the `__BUILD_DEBUG__` esbuild define and turned on with
+  `AUTISTMASK_DEBUG=1`, so a plain `make build` no longer hands every newly
+  created wallet the publicly committed test recovery phrase
+  ([#149](https://git.eeqj.de/sneak/AutistMask/issues/149)).
+- 2026-08-09: dApp approval signing moved into the popup — the password no
+  longer crosses the extension messaging boundary; the background broadcasts and
+  resolves approvals only, and verifies the signed artifact against the approval
+  it holds (#157).
+- 2026-08-09: Post-build assertion that every emitted bundle containing
+  `constants.js` has `DEBUG` compiled off, via `script/verify-build` on the
+  `make build` path (#170).
+- 2026-08-09: Containerized Chrome end-to-end harness (`make test-e2e` /
+  `script/test-e2e`) driving the real popup with all network intercepted, plus
+  the two used-but-not-imported crashes it caught: AddToken unreachable (#150)
+  and TransactionDetail broken for every ERC-20 transfer (#151). Harness
+  demonstrated failing before the fixes and passing after (#181). Interception
+  covers the MV3 background service worker, not just the popup page, and a
+  launch-time canary aborts the suite if worker traffic starts escaping.
+- 2026-08-09: Reviewed the repo end to end and filed the 1.0.0 backlog
+  (#149-#168).
+- 2026-08-09: Test coverage for the address-poisoning defense in
+  `src/shared/transactions.js` (#160)
+- 2026-07-26: About well in settings with build info, repo link and the version
+  click easter egg (#145); proper view navigation stack (#146).
 - 2026-07-07 Adopted scripts-to-rule-them-all: `script/` entrypoints, Makefile
-  shims, README Entrypoints section
-- 2026-03-01: About well in settings with build info and easter egg (in flight
-  on feature branch); USD display suppressed on testnets (#142); estimated USD
-  for ETH in approve-tx view (#141).
+  shims, README Entrypoints section (#148)
+- 2026-03-01: USD display suppressed on testnets (#142); estimated USD for ETH
+  in approve-tx view (#141).
 - Sepolia testnet support (#137); etherscan links go to token-specific URLs
   (#136).
 - Transaction detail improvements: Type field and on-chain details (#130),
@@ -45,12 +192,15 @@ get review, merge to main.
 
 # Future Steps
 
-- Verify main passes make check after the feature branch merges (not verified
-  2026-07-06 because an agent was active in the tree); fix anything red. main
-  must always be green.
-- Prune stale branches: dozens of merged local and remote feature branches
-  remain (fix/_, feature/_, tx-\*); delete merged ones locally and on origin.
-- Continue the issue backlog toward a feature-complete wallet, then cut further
-  tags as milestones land.
+Only work that has no issue of its own belongs here; everything else is on the
+tracker.
+
 - Pre-1.0 security review of the extension (key handling, DEBUG mode policy, RPC
-  input validation) before any 1.0rc tag.
+  input validation) before any 1.0rc tag. Individual filed issues are parts of
+  it, but the review is broader than any of them.
+- Decide whether docker-in-docker makes `make test-e2e` runnable in the Gitea
+  workflow. Extending the suite itself is tracked as
+  [#183](https://git.eeqj.de/sneak/AutistMask/issues/183) and
+  [#184](https://git.eeqj.de/sneak/AutistMask/issues/184).
+- Cut 1.0.0 once the milestone is empty, then continue tagging as milestones
+  land.

build.js

@@ -3,75 +3,183 @@ const path = require("path");
 const { execSync } = require("child_process");
 const esbuild = require("esbuild");
 
-const DIST_CHROME = path.join(__dirname, "dist", "chrome");
-const DIST_FIREFOX = path.join(__dirname, "dist", "firefox");
+const DIST = path.join(__dirname, "dist");
+const DIST_CHROME = path.join(DIST, "chrome");
+const DIST_FIREFOX = path.join(DIST, "firefox");
 const SRC = path.join(__dirname, "src");
 
+// The module whose compiled DEBUG state script/verify-build asserts, and the
+// manifest naming every emitted bundle that ends up containing it. The
+// manifest is derived from esbuild's own dependency graph rather than from a
+// hardcoded list, so it tracks the bundle layout instead of rotting with it.
+const AUDITED_MODULE = "src/shared/constants.js";
+const BUNDLE_MANIFEST = path.join(DIST, "constants-bundles.txt");
+
 function ensureDir(dir) {
     fs.mkdirSync(dir, { recursive: true });
 }
 
+// Repo-relative, forward-slashed, so the manifest reads the same on every
+// platform and can be consumed by a POSIX shell script without further work.
+function repoRelative(p) {
+    return path.relative(__dirname, p).split(path.sep).join("/");
+}
+
+// Collect the outputs of one esbuild run that bundle AUDITED_MODULE. esbuild
+// reports every input that contributed to an output in the metafile, which is
+// the authoritative answer to "is constants.js in this bundle" — unlike
+// searching the minified text, it does not depend on what survived minification.
+//
+// The ".js" filter below is the only place that assumption lives:
+// script/verify-build searches every file and symlink under dist/ for a
+// marker, without filtering by extension, and hard-fails if it cannot walk the
+// whole tree, so a bundle emitted under some other extension fails there as
+// unlisted rather than escaping both checks at once.
+function outputsContainingAuditedModule(metafile) {
+    return Object.entries(metafile.outputs)
+        .filter(([outFile, info]) => {
+            if (!outFile.endsWith(".js")) return false;
+            return Object.keys(info.inputs).some(
+                (input) => repoRelative(input) === AUDITED_MODULE,
+            );
+        })
+        .map(([outFile]) => repoRelative(outFile));
+}
+
+// DEBUG is a build-time flag, off unless explicitly requested. It is the only
+// thing that makes the hardcoded test mnemonic reachable, so the opt-in must be
+// exact: anything other than the literal "1" (unset, empty, "true", a typo)
+// produces a release build. Failing towards the safe mode is deliberate.
+function isDebugBuild() {
+    return process.env.AUTISTMASK_DEBUG === "1";
+}
+
+function getBuildInfo() {
+    const pkg = JSON.parse(
+        fs.readFileSync(path.join(__dirname, "package.json"), "utf8"),
+    );
+    let commitHash = "unknown";
+    try {
+        commitHash = execSync("git rev-parse --short HEAD", {
+            encoding: "utf8",
+        }).trim();
+    } catch (_) {
+        // not a git repo or git not available
+    }
+    let commitHashFull = "unknown";
+    try {
+        commitHashFull = execSync("git rev-parse HEAD", {
+            encoding: "utf8",
+        }).trim();
+    } catch (_) {
+        // not a git repo or git not available
+    }
+    return {
+        version: pkg.version,
+        license: pkg.license,
+        author: pkg.author,
+        commitHash,
+        commitHashFull,
+        buildDate: new Date().toISOString().slice(0, 10),
+    };
+}
+
 async function build() {
     console.log("Building AutistMask extension...");
 
+    const buildInfo = getBuildInfo();
+    console.log("Build info:", buildInfo);
+
+    const debugBuild = isDebugBuild();
+    console.log(
+        debugBuild
+            ? "Build mode: DEBUG (INSECURE - hardcoded test mnemonic, do not ship)"
+            : "Build mode: release (DEBUG off)",
+    );
+
+    const define = {
+        __BUILD_DEBUG__: JSON.stringify(debugBuild),
+        __BUILD_VERSION__: JSON.stringify(buildInfo.version),
+        __BUILD_LICENSE__: JSON.stringify(buildInfo.license),
+        __BUILD_AUTHOR__: JSON.stringify(buildInfo.author),
+        __BUILD_COMMIT__: JSON.stringify(buildInfo.commitHash),
+        __BUILD_COMMIT_FULL__: JSON.stringify(buildInfo.commitHashFull),
+        __BUILD_DATE__: JSON.stringify(buildInfo.buildDate),
+    };
+
+    // Emitted bundles that contain constants.js, accumulated across every
+    // esbuild run below and written out for script/verify-build.
+    const auditedBundles = [];
+
     // compile tailwind CSS
     console.log("Compiling Tailwind CSS...");
     const tailwindInput = path.join(SRC, "popup", "styles", "main.css");
-    const tailwindOutput = path.join(__dirname, "dist", "styles.css");
-    ensureDir(path.join(__dirname, "dist"));
+    const tailwindOutput = path.join(DIST, "styles.css");
+    ensureDir(DIST);
+
+    // Drop any manifest from a previous build before emitting anything, so a
+    // build that never gets around to writing one cannot be verified against
+    // a stale list.
+    fs.rmSync(BUNDLE_MANIFEST, { force: true });
+    // The locally installed binary, not `npx` — npx silently fetches from the
+    // registry when the binary is absent, which is an unpinned network fetch
+    // in the middle of a build.
+    const tailwindBin = path.join(
+        __dirname,
+        "node_modules",
+        ".bin",
+        "tailwindcss",
+    );
     execSync(
-        `npx @tailwindcss/cli -i ${tailwindInput} -o ${tailwindOutput} --minify`,
+        `"${tailwindBin}" -i "${tailwindInput}" -o "${tailwindOutput}" --minify`,
         { stdio: "inherit" },
     );
 
+    // Every bundle goes through here, so metafile collection cannot be
+    // forgotten when a new entry point is added.
+    async function bundle(entryPoint, outfile) {
+        const result = await esbuild.build({
+            entryPoints: [entryPoint],
+            bundle: true,
+            format: "iife",
+            outfile,
+            platform: "browser",
+            target: ["chrome110", "firefox110"],
+            minify: true,
+            metafile: true,
+            define,
+        });
+        auditedBundles.push(...outputsContainingAuditedModule(result.metafile));
+    }
+
     for (const distDir of [DIST_CHROME, DIST_FIREFOX]) {
         ensureDir(path.join(distDir, "src", "popup"));
         ensureDir(path.join(distDir, "src", "background"));
         ensureDir(path.join(distDir, "src", "content"));
 
         // bundle popup JS with esbuild (inlines ethers, libsodium, etc.)
-        await esbuild.build({
-            entryPoints: [path.join(SRC, "popup", "index.js")],
-            bundle: true,
-            format: "iife",
-            outfile: path.join(distDir, "src", "popup", "index.js"),
-            platform: "browser",
-            target: ["chrome110", "firefox110"],
-            minify: true,
-        });
+        await bundle(
+            path.join(SRC, "popup", "index.js"),
+            path.join(distDir, "src", "popup", "index.js"),
+        );
 
         // bundle background script
-        await esbuild.build({
-            entryPoints: [path.join(SRC, "background", "index.js")],
-            bundle: true,
-            format: "iife",
-            outfile: path.join(distDir, "src", "background", "index.js"),
-            platform: "browser",
-            target: ["chrome110", "firefox110"],
-            minify: true,
-        });
+        await bundle(
+            path.join(SRC, "background", "index.js"),
+            path.join(distDir, "src", "background", "index.js"),
+        );
 
         // bundle content script
-        await esbuild.build({
-            entryPoints: [path.join(SRC, "content", "index.js")],
-            bundle: true,
-            format: "iife",
-            outfile: path.join(distDir, "src", "content", "index.js"),
-            platform: "browser",
-            target: ["chrome110", "firefox110"],
-            minify: true,
-        });
+        await bundle(
+            path.join(SRC, "content", "index.js"),
+            path.join(distDir, "src", "content", "index.js"),
+        );
 
         // bundle inpage script (injected into page context, separate file)
-        await esbuild.build({
-            entryPoints: [path.join(SRC, "content", "inpage.js")],
-            bundle: true,
-            format: "iife",
-            outfile: path.join(distDir, "src", "content", "inpage.js"),
-            platform: "browser",
-            target: ["chrome110", "firefox110"],
-            minify: true,
-        });
+        await bundle(
+            path.join(SRC, "content", "inpage.js"),
+            path.join(distDir, "src", "content", "inpage.js"),
+        );
 
         // copy popup HTML
         fs.copyFileSync(
@@ -96,6 +204,16 @@ async function build() {
         path.join(DIST_FIREFOX, "manifest.json"),
     );
 
+    // Written last so a build that died partway through leaves no manifest
+    // at all, which script/verify-build treats as a hard failure rather than
+    // as "nothing to check".
+    const manifest = [...new Set(auditedBundles)].sort();
+    fs.writeFileSync(BUNDLE_MANIFEST, manifest.map((p) => `${p}\n`).join(""));
+    console.log(
+        `Bundles containing ${AUDITED_MODULE}: ${manifest.length} ` +
+            `(listed in ${repoRelative(BUNDLE_MANIFEST)})`,
+    );
+
     console.log("Build complete: dist/chrome/ and dist/firefox/");
 }
 

docs/README.md

@@ -6,10 +6,10 @@ and ERC-20 tokens, and connects to web3 sites. Nothing else.
 
 ## Why AutistMask Exists
 
-MetaMask has become bloated with swap UIs, portfolio dashboards, analytics,
-tracking, and advertisements. It is no longer a simple wallet. Most alternatives
-(Rabby, Rainbow, etc.) only support Chromium browsers, leaving Firefox users
-without a usable option.
+The most popular browser-based EVM wallet has become bloated with swap UIs,
+portfolio dashboards, analytics, tracking, and advertisements. It is no longer a
+simple wallet. The common alternatives only support Chromium browsers, leaving
+Firefox users without a usable option.
 
 AutistMask exists because a wallet should be a wallet. You should be able to see
 your balances, send tokens, receive tokens, and connect to sites. That is all a
@@ -27,9 +27,10 @@ analytics, use a portfolio tracker. The wallet is not the place for any of that.
 
 - **Encrypt your recovery phrase and private keys at rest.** Your secrets are
   encrypted on disk using Argon2id key derivation and XSalsa20-Poly1305
-  authenticated encryption (via libsodium). Your password is required only when
-  signing a transaction. Viewing balances and addresses never requires a
-  password.
+  authenticated encryption (via libsodium). Your password is required whenever a
+  secret has to be decrypted: signing a transaction, signing a message or typed
+  data, exporting a private key, and deleting a wallet. Viewing balances and
+  addresses never requires a password.
 
 - **Let you choose your own RPC endpoint.** The default is a public Ethereum
   RPC, but you can point it at your own node or any provider you trust. No
@@ -56,23 +57,25 @@ analytics, use a portfolio tracker. The wallet is not the place for any of that.
 
 - **No NFT galleries or portfolio views.** This is a wallet, not a dashboard.
 
-- **No token auto-discovery.** AutistMask does not scan the blockchain for
-  tokens you might hold. You add tokens manually by contract address. This
-  prevents scam tokens from appearing in your wallet uninvited.
+- **No third-party token list APIs.** Token balances come from the same block
+  explorer you configure for transaction history, and the extension ships its
+  own hardcoded list of top ERC-20 contract addresses for symbol-spoofing
+  detection. Any token you want tracked across all your addresses, you add
+  yourself by contract address.
 
-- **No phishing blocklists from third parties.** AutistMask does not phone home
-  to check URLs against a remote blocklist. It does maintain a local list of
-  known scam addresses, but this is shipped with the extension, not fetched from
-  a server.
+- **No backend servers operated by the developer.** Nothing is sent to any
+  server run by AutistMask. Every network destination is listed below.
 
 ## How It Works
 
 AutistMask is a browser extension that runs entirely in your browser. It does
-not have a backend server. It communicates with three external services:
+not have a backend server. It communicates with five external destinations:
+three you configure yourself, and two fixed ones used for scam detection.
 
 ### External Services
 
-**Ethereum JSON-RPC endpoint** (default: `ethereum-rpc.publicnode.com`)
+**Ethereum JSON-RPC endpoint** (default: `ethereum-rpc.publicnode.com`;
+`ethereum-sepolia-rpc.publicnode.com` on Sepolia)
 
 This is how AutistMask talks to the Ethereum network. Every wallet needs an
 Ethereum node to check balances, estimate gas, broadcast transactions, and
@@ -80,27 +83,77 @@ verify confirmations. The default is a free public RPC endpoint. You can change
 this in Settings to any Ethereum JSON-RPC endpoint, including your own local
 node.
 
-What gets sent: standard Ethereum JSON-RPC requests (balance queries,
-transaction broadcasts, gas estimates, ENS lookups). Your addresses are
-necessarily visible to the RPC provider when querying balances.
+When it is contacted: on every balance refresh (every 10 seconds while the popup
+is open, every 60 seconds in the background), when you type an ENS name into the
+Send screen, when a send is prepared and broadcast, while a pending transaction
+is polled for its receipt, and for the reverse ENS lookups used to label
+addresses (cached for 12 hours).
 
-**Blockscout API** (default: `eth.blockscout.com/api/v2`)
+What gets sent: standard Ethereum JSON-RPC requests (balance queries,
+transaction broadcasts, gas estimates, ENS lookups, contract-code checks). Your
+addresses are necessarily visible to the RPC provider when querying balances.
+
+**Blockscout API** (default: `eth.blockscout.com/api/v2`;
+`eth-sepolia.blockscout.com/api/v2` on Sepolia)
 
 Used to fetch token balances and transaction history. Blockscout is an
 open-source blockchain explorer. AutistMask queries it for your ERC-20 token
-balances and recent transactions. You can change this in Settings to a
+balances (including the holder counts used for spam filtering) and your recent
+transactions and token transfers. You can change this in Settings to a
 self-hosted Blockscout instance.
 
+When it is contacted: on every balance refresh, and whenever a screen showing
+transaction history is opened.
+
 What gets sent: your Ethereum addresses (to look up balances and transactions).
 
 **CoinDesk CADLI price API** (`data-api.coindesk.com`)
 
-Used to fetch current USD prices for ETH and ERC-20 tokens. Prices are cached
-for 5 minutes. No API key is required. No user data is sent -- only a list of
-token symbols (e.g. "ETH", "USDC") to get their prices.
+Used to fetch current USD prices for ETH and the top 25 tokens. Prices are
+cached for 5 minutes. No API key is required. This endpoint is not
+user-configurable, and it is not contacted at all while you are on a testnet,
+where no USD values are shown.
 
-What gets sent: token symbol names. No addresses, no balances, no identifying
-information.
+When it is contacted: while the popup is open, at most once every 5 minutes.
+
+What gets sent: token symbol names (e.g. "ETH", "USDC"). No addresses, no
+balances, no identifying information. As with any request, CoinDesk sees your IP
+address.
+
+**Phishing domain blocklist** (`raw.githubusercontent.com`)
+
+A community-maintained list of phishing domains, used to warn you when a site
+that asks to connect, or to have a transaction or signature approved, is a known
+scam. A copy is bundled into the extension at build time, so the protection
+works before any network request happens. At runtime the extension fetches the
+live list to pick up newly added domains, keeping only the entries not already
+in the bundled copy (persisted locally if under 256 KiB). This endpoint is not
+user-configurable.
+
+When it is contacted: when the background script starts, if the last fetch was
+more than 24 hours ago, and every 24 hours after that. The time of the last
+fetch is remembered across browser and background restarts, so restarting does
+not cause a re-download. If a fetch fails, or the list is too large to keep, the
+extension waits an hour before trying again outside that 24-hour schedule rather
+than retrying on every restart. It is a plain download of a public file —
+nothing about you is sent, but the host sees your IP address. If the fetch
+fails, the bundled copy is still used.
+
+**Etherscan address labels** (`etherscan.io`; `sepolia.etherscan.io` on Sepolia)
+
+When you review a send, AutistMask fetches the recipient's public Etherscan
+address page and looks for a "Fake_Phishing"/"Phish/Hack" label or a scam
+warning, and shows a red warning if it finds one. This is a plain page fetch
+with no API key, made by your browser. It is best-effort: if it fails, it is
+silently ignored. This endpoint is not user-configurable.
+
+When it is contacted: each time you reach the send confirmation screen.
+
+What gets sent: the recipient address you are about to send to, and your IP
+address. Your own addresses are not sent.
+
+Etherscan links shown elsewhere in the UI (on addresses, transactions, and token
+contracts) are ordinary links. They contact nothing until you click them.
 
 ### What Stays Local
 
@@ -123,8 +176,11 @@ word recovery phrase can restore your wallet on any device without your
 password. The password only protects the copy stored in this browser. If you
 lose your recovery phrase, your password cannot help you recover it.
 
-Your password is only requested when you send a transaction. Viewing balances,
-receiving funds, and browsing transaction history never require your password.
+Your password is requested whenever an encrypted secret must be decrypted: when
+you send a transaction, when a site asks you to sign a message or typed data,
+when you export an address's private key, and when you delete a wallet. Viewing
+balances, receiving funds, and browsing transaction history never require your
+password.
 
 ## Installation
 
@@ -147,34 +203,46 @@ receiving funds, and browsing transaction history never require your password.
 ### Creating a New Wallet
 
 1. Click the AutistMask icon in your browser toolbar.
-2. Click "Add wallet".
-3. Click the die button to generate a random 12-word recovery phrase.
+2. Click "Add wallet" (on first use), or open Settings and click "+ Add wallet".
+3. On the "From Phrase" tab, click the die button to generate a random 12-word
+   recovery phrase.
 4. **Write down the recovery phrase and store it safely.** Anyone with these
    words can take your funds. If you lose them, your wallet is gone. AutistMask
    cannot recover them for you.
-5. Choose a password. This encrypts your recovery phrase on this device.
-6. Click "Add".
+5. Choose a password and confirm it. This encrypts your recovery phrase on this
+   device.
+6. Click "Import".
 
 ### Importing an Existing Wallet
 
-**From a recovery phrase:** Follow the same steps as creating a wallet, but
-paste your existing 12 or 24 word recovery phrase instead of generating a new
-one. AutistMask uses the same derivation path as MetaMask (`m/44'/60'/0'/0`), so
-your addresses will match.
+The Add Wallet screen has three tabs:
 
-**From a private key:** On the Add Wallet screen, click "Have a private key
-instead?" and paste your private key. This creates a single-address wallet.
+**From Phrase:** Paste your existing 12 or 24 word recovery phrase instead of
+generating a new one. AutistMask uses the standard BIP-44 Ethereum derivation
+path (`m/44'/60'/0'/0`), which is what other wallets use by default, so your
+addresses will match and your phrase stays portable in both directions.
+
+**From Key:** Paste a single private key. This creates a single-address wallet.
+
+**From xprv:** Paste an extended private key. This imports the HD wallet and
+scans for used addresses.
+
+All three tabs ask for the same password fields, and the "Import" button
+finishes the job.
 
 ### Adding More Addresses
 
-HD wallets (created from a recovery phrase) can derive multiple addresses. On
-the home screen, click the "+" button next to a wallet name to add the next
-address. These are deterministic -- the same recovery phrase will always produce
-the same sequence of addresses.
+HD wallets (created from a recovery phrase or an xprv) can derive multiple
+addresses. On the home screen, click the "+" button next to a wallet name to add
+the next address. These are deterministic -- the same recovery phrase will
+always produce the same sequence of addresses.
 
 ### Adding ERC-20 Tokens
 
-AutistMask does not auto-discover tokens. To track a token:
+Tokens you hold show up automatically only if they are in the extension's
+bundled list of well-known tokens or have at least 1,000 holders; everything
+else is treated as spam and hidden. To track a token explicitly (which also
+shows it at zero balance), add it by contract address:
 
 1. Go to an address detail view (click `[info]` on any address).
 2. Click "+ Token".
@@ -183,12 +251,13 @@ AutistMask does not auto-discover tokens. To track a token:
 4. Click "Add".
 
 The token balance will appear on the address detail screen and on the home
-screen.
+screen. Tokens can also be added from Settings, under "Tracked Tokens".
 
 ## Sending
 
 1. Click "Send" from the home screen or an address detail view.
-2. Select what to send (ETH or any tracked ERC-20 token).
+2. Select what to send (ETH, or any ERC-20 token with a balance on this address
+   that survives the spam filters).
 3. Enter the recipient address or ENS name (e.g. `vitalik.eth`).
 4. Enter the amount.
 5. Click "Review" to see the confirmation screen.
@@ -200,12 +269,18 @@ The confirmation screen shows:
 - **From and To addresses** with identicons and Etherscan links
 - **Amount** with USD estimate
 - **Your current balance** with USD estimate
-- **Estimated network fee** in ETH with USD estimate
+- **Network fee** — what the transfer is expected to cost, in ETH with a USD
+  estimate, and below it the larger amount reserved until it confirms. The
+  reserve is what the network requires up front and what the balance check gates
+  on; the refund of the difference is why the two differ
+- **Warnings** if the recipient is a contract, a burn address, one of your own
+  addresses, on the bundled scam-address list, or labelled as a phisher on
+  Etherscan
 
-After reviewing, click "Send" and enter your password. The transaction will be
-broadcast to the network and you will see a waiting screen with a timer. Once
-confirmed (or after 60 seconds), you will see either a success or error screen
-with the transaction hash and an Etherscan link.
+After reviewing, enter your password and click "Sign & Send". The transaction
+will be broadcast to the network and you will see a waiting screen with a timer.
+Once confirmed (or after 60 seconds), you will see either a success or error
+screen with the transaction hash and an Etherscan link.
 
 ### Sending a Specific Token
 
@@ -219,10 +294,10 @@ cannot accidentally switch to a different one.
 1. Click "Receive" from the home screen or an address detail view.
 2. Share the QR code or copy the address using the "Copy address" button.
 
-When receiving ERC-20 tokens, make sure the sender is sending on the Ethereum
-network. AutistMask is an Ethereum mainnet wallet. Tokens sent on other networks
-(Polygon, Arbitrum, BSC, etc.) to the same address will not appear and may be
-permanently lost.
+When receiving ERC-20 tokens, make sure the sender is sending on the network you
+are using. AutistMask supports Ethereum mainnet and the Sepolia testnet. Tokens
+sent on other networks (Polygon, Arbitrum, BSC, etc.) to the same address will
+not appear and may be permanently lost.
 
 ## Connecting to Web3 Sites
 
@@ -237,7 +312,12 @@ pages. When a site requests access to your wallet:
 
 When a connected site requests a transaction, a separate approval popup appears
 showing the transaction details (from, to, value, data). You must enter your
-password and click "Confirm" to authorize it.
+password and click "Confirm" to authorize it. Message and typed-data signature
+requests work the same way, with a "Sign" button, and also require your
+password.
+
+If the requesting site's domain is on the phishing blocklist, all three approval
+screens show a red phishing warning before you decide.
 
 You can manage site permissions in Settings. Allowed and denied sites can be
 individually removed to reset their permissions.
@@ -247,15 +327,25 @@ individually removed to reset their permissions.
 AutistMask includes several defenses against common Ethereum scams, all enabled
 by default:
 
-**Known token symbol verification.** AutistMask ships a list of ~250 legitimate
-ERC-20 tokens with their contract addresses. If a transaction claims to involve
-a known symbol (like "ETH" or "USDT") but comes from an unrecognized contract,
-it is identified as a spoof and hidden.
+**Known token symbol verification.** AutistMask ships a bundled list of
+high-market-cap ERC-20 tokens with their legitimate contract addresses — a
+point-in-time snapshot of the highest-market-cap Ethereum mainnet ERC-20s, fixed
+at build time and updated only when a new release ships a newer snapshot. If a
+transaction or balance claims to involve a known symbol (like "ETH" or "USDT")
+but comes from an unrecognized contract, it is identified as a spoof and hidden.
+In your transaction history this is the "Hide fake tokens impersonating a known
+symbol" setting, which you can switch off; doing so also stops new entries being
+added to the fraud contract blocklist below, since detecting a spoof is what
+fills it. The send token list always applies the check. Your balances apply it
+too, with one exception: a token claiming the symbol "ETH" is not filtered
+there, so a fake "ETH" token can still show up in your balance list even though
+it is hidden from your transaction history and from the send token list.
 
 **Low-holder token filtering.** Tokens with fewer than 1,000 holders are hidden
-from transaction history and the send token list. Legitimate tokens have
-substantial holder counts; scam tokens deployed for address poisoning typically
-have zero.
+from transaction history and the send token list, and are left out of your
+balances unless they are on the bundled known-token list or you added them
+yourself. Legitimate tokens have substantial holder counts; scam tokens deployed
+for address poisoning typically have zero.
 
 **Fraud contract blocklist.** When AutistMask detects a fraudulent transfer, it
 adds the contract address to a local blocklist. Future transactions from that
@@ -266,15 +356,29 @@ ETH by default) are hidden. Scammers send dust from look-alike addresses to
 plant them in your transaction history. The threshold is configurable in
 Settings.
 
-All of these filters can be individually disabled in Settings if you prefer to
+**Scam address list.** A list of known fraud, drainer, and phishing addresses is
+shipped with the extension. Sending to one of them raises a warning on the
+confirmation screen. It contains only addresses involved in fraud -- it is not a
+sanctions list.
+
+**Phishing domain warnings.** Sites asking to connect or to have something
+approved are checked against the phishing domain blocklist described under
+External Services, and flagged with a red banner if they match.
+
+The first four filters can be individually disabled in Settings if you prefer to
 see everything unfiltered.
 
 ## Settings
 
 Click the gear icon on the home screen to access settings:
 
-- **Wallets**: Add a new wallet.
-- **Display**: Toggle whether tracked tokens with zero balance are shown.
+- **Wallets**: Your wallets, and "+ Add wallet".
+- **Tracked Tokens**: The ERC-20 tokens tracked across all addresses, and "+ Add
+  token".
+- **Display**: Toggle whether tracked tokens with zero balance are shown, switch
+  timestamps to UTC, and choose the theme (System, Light, or Dark).
+- **Network**: Switch between Ethereum Mainnet and Sepolia Testnet. Switching
+  resets the RPC and Blockscout endpoints to that network's defaults.
 - **Ethereum RPC**: Change the Ethereum node endpoint. Default is a public RPC.
   You can use your own node for maximum privacy.
 - **Blockscout API**: Change the Blockscout instance used for token balances and
@@ -282,15 +386,17 @@ Click the gear icon on the home screen to access settings:
 - **Token Spam Protection**: Toggle individual scam filters and set the dust
   transaction threshold.
 - **Allowed Sites / Denied Sites**: View and manage web3 site permissions.
+- **About**: License, author, version, release date, and a link to the commit
+  this build came from.
 
 ## Frequently Asked Questions
 
-**Is AutistMask compatible with MetaMask?**
+**Can I use AutistMask alongside another wallet?**
 
-Yes. AutistMask uses the same derivation path (`m/44'/60'/0'/0`) as MetaMask. If
-you import the same recovery phrase, you will get the same addresses. You can
-use both wallets side by side, though only one can be the active
-`window.ethereum` provider at a time.
+Yes. AutistMask uses the standard `m/44'/60'/0'/0` derivation path, so importing
+the same recovery phrase gives you the same addresses as any other wallet using
+that path. Two wallet extensions can be installed side by side, though only one
+can be the active `window.ethereum` provider at a time.
 
 **Can I use AutistMask with a hardware wallet?**
 
@@ -298,8 +404,9 @@ Not yet. Hardware wallet support may be added in the future.
 
 **Does AutistMask support networks other than Ethereum mainnet?**
 
-Not currently. AutistMask is Ethereum mainnet only. Multi-chain support may be
-added in the future.
+Ethereum mainnet and the Sepolia testnet, selectable in Settings. No other
+networks are supported today. On Sepolia, USD values are not shown, because
+testnet tokens have no market value.
 
 **Where is my data stored?**
 
@@ -312,7 +419,7 @@ to any server operated by AutistMask.
 
 Your data is deleted. Make sure you have your recovery phrase backed up before
 uninstalling. With your recovery phrase, you can restore your wallet in
-AutistMask or any other compatible wallet (MetaMask, etc.) at any time.
+AutistMask or any other wallet that uses the standard derivation path.
 
 **What happens if a transaction times out?**
 

manifest/chrome.json

@@ -3,8 +3,11 @@
     "name": "AutistMask",
     "version": "0.1.0",
     "description": "Minimal Ethereum wallet for Chrome",
-    "permissions": ["storage", "activeTab"],
+    "permissions": ["storage", "activeTab", "alarms"],
     "host_permissions": ["<all_urls>"],
+    "content_security_policy": {
+        "extension_pages": "script-src 'self' 'wasm-unsafe-eval'; object-src 'self'"
+    },
     "action": {
         "default_popup": "src/popup/index.html"
     },

manifest/firefox.json

@@ -3,7 +3,8 @@
     "name": "AutistMask",
     "version": "0.1.0",
     "description": "Minimal Ethereum wallet for Firefox",
-    "permissions": ["storage", "activeTab", "<all_urls>"],
+    "permissions": ["storage", "activeTab", "alarms", "<all_urls>"],
+    "content_security_policy": "script-src 'self' 'wasm-unsafe-eval'; object-src 'self'",
     "browser_action": {
         "default_popup": "src/popup/index.html"
     },

package.json

@@ -7,6 +7,7 @@
     "private": true,
     "scripts": {
         "test": "jest --forceExit",
+        "test:verbose": "jest --forceExit --verbose",
         "build": "node build.js",
         "lint": "prettier --check .",
         "fmt": "prettier --write .",
@@ -16,6 +17,7 @@
         "@tailwindcss/cli": "^4.2.1",
         "esbuild": "^0.27.3",
         "jest": "^30.2.0",
+        "playwright-core": "1.56.0",
         "prettier": "^3.8.1",
         "tailwindcss": "^4.2.1"
     },

script/test

@@ -7,7 +7,13 @@ ROOT="$(cd "$(dirname "$0")/.." && pwd -P)"
 main() {
     cd "$ROOT"
     echo "Running tests..."
-    timeout 30 yarn run test 2>&1
+    timeout 30 yarn run test 2>&1 || {
+        echo "--- Rerunning with --verbose for details ---"
+        timeout 30 yarn run test:verbose 2>&1 || true
+        # Always fail: the first run already proved the tests are broken, so a
+        # flaky pass on the rerun must not turn the build green.
+        exit 1
+    }
 }
 
 main "$@"

script/test-e2e

@@ -0,0 +1,64 @@
+#!/bin/sh
+# script/test-e2e: build the extension and drive the real popup in a real
+# Chromium inside a pinned container. Our own extension to
+# scripts-to-rule-them-all.
+#
+# Deliberately NOT called by script/check or script/test: REPO_POLICIES.md
+# caps make test at 20 seconds and a browser suite does not fit. Run it
+# yourself before touching popup views; it is the only check that can see
+# a used-but-not-imported identifier blow up at runtime.
+set -eu
+
+ROOT="$(cd "$(dirname "$0")/.." && pwd -P)"
+
+# mcr.microsoft.com/playwright:v1.56.0-noble, 2026-08-09
+#
+# The playwright-core devDependency is pinned to the matching Playwright
+# version (1.56.0) and the two must be bumped together: the browsers ship
+# inside this image, and playwright-core looks for the exact browser
+# revision its own version expects. A mismatch fails at launch.
+IMAGE="mcr.microsoft.com/playwright@sha256:35246d87a7c88ea9b771c65d33171b2611b02a8253b4b12ce6f94376c55f99f2"
+
+main() {
+    cd "$ROOT"
+
+    if ! command -v docker >/dev/null 2>&1; then
+        echo "test-e2e: docker is required to run the e2e suite" >&2
+        exit 1
+    fi
+
+    echo "Building extension for e2e..."
+    yarn run build 2>&1
+
+    echo "Running e2e suite in the pinned Playwright container..."
+    # --ipc=host: Chromium's shared-memory needs more than the default
+    #   64MB /dev/shm or renderers crash.
+    # --user: keep files the suite touches owned by the caller, not root.
+    # HOME=/tmp: the mapped uid has no home directory in the image.
+    # PW_EXPERIMENTAL_SERVICE_WORKER_NETWORK_EVENTS=1: without it,
+    #   ctx.route() intercepts page requests only, and every fetch made by
+    #   the MV3 background service worker — including the phishing
+    #   blocklist fetch that src/background/index.js issues at worker
+    #   startup — goes to the real internet. The flag is experimental and
+    #   Playwright may drop or rename it. It cannot break silently: the
+    #   harness probes service-worker interception at launch and aborts
+    #   the whole suite if it is not in effect (see the interception
+    #   canary in tests/e2e/harness.js). If a future Playwright removes
+    #   the flag, that probe is what will fail, and the fix is either a
+    #   replacement mechanism or an honest downgrade of the isolation
+    #   claim in tests/e2e/network.js and README.md — not deleting the
+    #   probe. The image is pinned by digest, so this can only ever bite
+    #   on a deliberate bump.
+    docker run --rm \
+        --ipc=host \
+        --user "$(id -u):$(id -g)" \
+        -e HOME=/tmp \
+        -e PW_EXPERIMENTAL_SERVICE_WORKER_NETWORK_EVENTS=1 \
+        -e "E2E_TRACE_NETWORK=${E2E_TRACE_NETWORK:-0}" \
+        -v "$ROOT:/work" \
+        -w /work \
+        "$IMAGE" \
+        node tests/e2e/run.js
+}
+
+main "$@"

script/verify-build

@@ -0,0 +1,295 @@
+#!/bin/sh
+# script/verify-build: assert the compiled DEBUG state of the emitted
+# bundles. Our own extension to scripts-to-rule-them-all, run at the end of
+# make build / make build-debug.
+#
+# Why this exists: DEBUG makes the publicly committed test recovery phrase the
+# output of wallet creation, so a release artifact built with it live hands
+# every new wallet to anyone who reads the repo. The test suite cannot see
+# this, because it loads src/shared/constants.js outside a bundle and takes
+# the fallback branch; the property only exists in the emitted output, so it
+# has to be asserted against the emitted output.
+#
+# What it reads: dist/constants-bundles.txt, written by build.js from
+# esbuild's metafile, naming every emitted bundle that contains
+# src/shared/constants.js. Each of those must carry exactly one of the two
+# BUILD_DEBUG_MARKER literals that constants.js folds down to.
+#
+# It fails rather than passes whenever it cannot determine a bundle's state.
+# Minified output is not a stable contract, so "matched neither form" is not
+# evidence of anything and must never read as green.
+set -eu
+
+ROOT="$(cd "$(dirname "$0")/.." && pwd -P)"
+
+# Absolute path to this script, resolved before anything cd's anywhere.
+# check_unlisted_bundles re-invokes it through xargs, and $0 on its own may be
+# relative to a directory we are about to leave.
+SELF="$(cd "$(dirname "$0")" && pwd -P)/$(basename "$0")"
+
+# Internal re-entry flag; see scan_dist_paths.
+SCAN_FLAG="--scan-dist-paths"
+
+# A literal newline, for the is_listed guard.
+NEWLINE='
+'
+
+MANIFEST="dist/constants-bundles.txt"
+MARKER_ON="autistmask-build-debug=on"
+MARKER_OFF="autistmask-build-debug=off"
+
+# Set by read_marker.
+MARKER=""
+
+# Temporary file holding the NUL-delimited dist/ listing, removed by the EXIT
+# trap because fail() exits from wherever it is called.
+LISTING=""
+
+fail() {
+    echo "verify-build: FAIL: $*" >&2
+    exit 1
+}
+
+cleanup() {
+    [ -z "$LISTING" ] || rm -f "$LISTING"
+}
+trap cleanup EXIT
+
+# Is the literal $1 present in the file $2? Match (grep exit 0) and no-match
+# (exit 1) are answers about the emitted output. Anything else (exit 2: the
+# file could not be read) is not an answer at all, and must not be reported as
+# "no marker" — that would blame the bundle for a permissions or I/O fault.
+has_marker() {
+    _hm_status=0
+    grep -q -F -e "$1" -- "$2" || _hm_status=$?
+    case "$_hm_status" in
+    0) return 0 ;;
+    1) return 1 ;;
+    *)
+        fail "grep exited $_hm_status reading $2, so the file could not be
+    searched and its DEBUG state was not checked at all. That is a permissions
+    or I/O fault on the artifact, not a change in the emitted output. Refusing
+    to report success."
+        ;;
+    esac
+}
+
+# Does the manifest list the path $1, as a whole line? Same discipline as
+# has_marker: exit 0 and 1 are answers about the manifest, exit 2 means the
+# manifest could not be read and is not an answer at all. Without this, an
+# unreadable manifest reads as "this file is not listed" and every emitted
+# bundle gets reported as an unlisted one.
+#
+# A path containing a newline is answered without asking grep, because grep
+# would read the pattern as two patterns and report a match on either. That is
+# how such a path escaped this check even once the walk stopped splitting it:
+# the half before the newline matched a listed line and the file was skipped.
+# The manifest is line-delimited, so it cannot name such a path at all, and
+# "not listed" is the only true answer.
+is_listed() {
+    case "$1" in
+    *"$NEWLINE"*) return 1 ;;
+    esac
+    _il_status=0
+    grep -q -x -F -e "$1" -- "$MANIFEST" || _il_status=$?
+    case "$_il_status" in
+    0) return 0 ;;
+    1) return 1 ;;
+    *)
+        fail "grep exited $_il_status reading $MANIFEST, so it could not be
+    searched and nothing was established about which bundles it lists. That is
+    a permissions or I/O fault on the manifest, not a stale manifest. Refusing
+    to report success."
+        ;;
+    esac
+}
+
+# Read one bundle's DEBUG state into MARKER. Exactly one marker must be
+# present. Both means the ternary in constants.js was never folded, which is
+# what happens when the __BUILD_DEBUG__ define goes missing from build.js:
+# DEBUG stops being known at build time. Neither means we are reading output
+# we do not understand. Both are hard failures; neither is ever treated as
+# absence of a problem.
+read_marker() {
+    _file="$1"
+    _on=no
+    _off=no
+    if has_marker "$MARKER_ON" "$_file"; then _on=yes; fi
+    if has_marker "$MARKER_OFF" "$_file"; then _off=yes; fi
+
+    if [ "$_on" = yes ] && [ "$_off" = yes ]; then
+        fail "$_file carries both debug markers, so DEBUG was not resolved at
+    build time: the ternary in src/shared/constants.js survived into the
+    emitted output. This does not mean the debug branch is live in this
+    artifact: an unresolved __BUILD_DEBUG__ is undeclared in extension
+    context, so DEBUG evaluates to false at runtime. It does mean the
+    release/debug distinction is no longer enforced at build time, and which
+    way that fallback happens to evaluate is then an accident a refactor can
+    flip. Check that build.js still defines __BUILD_DEBUG__."
+    fi
+    if [ "$_on" = no ] && [ "$_off" = no ]; then
+        fail "$_file carries no debug marker, so its DEBUG state cannot be
+    determined. Either BUILD_DEBUG_MARKER is gone from src/shared/constants.js
+    or the emitted output changed shape. Refusing to report success."
+    fi
+
+    if [ "$_on" = yes ]; then
+        MARKER="$MARKER_ON"
+    else
+        MARKER="$MARKER_OFF"
+    fi
+}
+
+# The manifest says which bundles must carry a marker. This says no other
+# emitted file may carry one, which catches a manifest that has gone stale
+# or short rather than trusting whatever it happens to list.
+#
+# Deliberately unfiltered by extension. build.js selects manifest entries with
+# an endsWith(".js") test; repeating that literal here would mean a bundle
+# emitted under some other extension escaped the manifest AND this check at
+# once, which is the correlated blind spot the two-source design exists to
+# avoid. Every regular file and every symlink under dist/ is searched — that
+# is the whole of what a build emits — so build.js's filter is the only place
+# the assumption lives and this check is what catches it being wrong.
+#
+# That claim only holds if the walk is exhaustive and every name survives it
+# intact, so four things are enforced here rather than assumed:
+#
+#   - the walk is NUL-delimited and the paths reach the check as arguments, so
+#     no name can be reshaped on the way in. Read line by line, a name with a
+#     trailing space lost it to read's field splitting and the remnant then
+#     matched a manifest line, and a name containing a newline arrived as a
+#     listed path plus an empty one. Both left a marker-carrying, unlisted file
+#     unchecked while the script still reported success. Delivering such a name
+#     intact is only half of it; is_listed also has to keep it out of grep's
+#     pattern, for the same reason.
+#   - find's exit status is checked. A subtree it cannot descend is reported on
+#     stderr and then simply missing from the listing, so an unchecked status
+#     turns "could not look" into "nothing was there" — the same conflation
+#     has_marker exists to prevent. The status cannot be read off a pipeline,
+#     so the listing lands in a file that xargs then reads back.
+#   - symlinks are walked too (-type l), not skipped. A marker-carrying bundle
+#     reachable under an unlisted path in dist/ is a stale manifest whether the
+#     path is a link or a file, and grep reads through the link. A link that
+#     cannot be read through — dangling, or pointing at a directory — fails
+#     hard via has_marker's exit-2 path, which is the fail-closed answer: the
+#     build emits neither, so their DEBUG state is unproven, not fine.
+#   - dist/ itself must be a directory and not a symlink, which main asserts
+#     before anything reads through it. find does not follow a symlink named on
+#     its own command line, so a linked dist/ collapses this walk to one entry
+#     and cross-checks nothing.
+#
+# Types other than regular files and symlinks are left out on purpose: a build
+# emits none of them, and grep on a fifo would hang rather than fail.
+check_unlisted_bundles() {
+    LISTING="$(mktemp "${TMPDIR:-/tmp}/verify-build-dist.XXXXXX")" ||
+        fail "could not create a temporary file for the dist/ listing, so the
+    tree was never walked. Refusing to report success."
+
+    _find_status=0
+    find dist \( -type f -o -type l \) -print0 >"$LISTING" || _find_status=$?
+    [ "$_find_status" -eq 0 ] ||
+        fail "find exited $_find_status enumerating dist/, so part of the tree
+    was never walked and nothing was established about the files in it. Any
+    unlisted bundle there went unchecked. That is a permissions or I/O fault on
+    the artifact, not a stale manifest. Refusing to report success."
+
+    _scan_status=0
+    xargs -0 "$SELF" "$SCAN_FLAG" <"$LISTING" || _scan_status=$?
+    [ "$_scan_status" -eq 0 ] ||
+        fail "the unlisted-bundle scan exited $_scan_status: either a path
+    under dist/ failed the check reported above, or the scan could not be run
+    at all. Refusing to report success."
+}
+
+# The per-path half of check_unlisted_bundles. It runs in a re-invocation of
+# this script, so it uses the same is_listed and has_marker as the rest of the
+# file rather than a second copy of them that could drift. Paths arrive as
+# arguments and are never split, joined or trimmed.
+scan_dist_paths() {
+    for _file in "$@"; do
+        if is_listed "$_file"; then
+            continue
+        fi
+        if has_marker "$MARKER_ON" "$_file" ||
+            has_marker "$MARKER_OFF" "$_file"; then
+            fail "$_file carries a debug marker but is absent from $MANIFEST,
+    so the manifest no longer describes the emitted bundles."
+        fi
+    done
+}
+
+# The requested mode, read from our own environment using build.js's exact
+# rule: only the literal 1 opts in. Deliberately not taken from anything
+# build.js records about itself, so build.js cannot vouch for build.js.
+expected_marker() {
+    if [ "${AUTISTMASK_DEBUG-}" = "1" ]; then
+        echo "$MARKER_ON"
+    else
+        echo "$MARKER_OFF"
+    fi
+}
+
+main() {
+    cd "$ROOT"
+
+    # Internal re-entry from check_unlisted_bundles' xargs. Not part of the
+    # command-line interface: nothing else invokes it, and it is a distinct
+    # entry point rather than a mode flag threaded through the checks below.
+    if [ "${1-}" = "$SCAN_FLAG" ]; then
+        shift
+        scan_dist_paths "$@"
+        return 0
+    fi
+
+    expected="$(expected_marker)"
+    echo "Verifying emitted bundles (expecting $expected)..."
+
+    # Asserted here rather than left to grep. A symlinked dist/ used to fail
+    # only because GNU grep exits 2 on a directory, so check_unlisted_bundles'
+    # single entry hit has_marker's I/O path by luck; under a grep that exits 1
+    # instead, the whole cross-check would have collapsed into a pass.
+    if [ -h dist ]; then
+        fail "dist is a symlink, not a directory. find does not follow a
+    symlink named on its own command line, so the unlisted-bundle cross-check
+    would see one entry instead of the emitted tree and establish nothing about
+    it. Refusing to report success."
+    fi
+    [ -d dist ] ||
+        fail "dist is not a directory, so there is no emitted tree to verify.
+    build.js writes it; run make build first."
+
+    [ -f "$MANIFEST" ] ||
+        fail "$MANIFEST is missing. build.js writes it at the end of a
+    successful build; run make build first."
+    [ -s "$MANIFEST" ] ||
+        fail "$MANIFEST is empty, so no emitted bundle was found to contain
+    src/shared/constants.js. That is never correct, so it is a failure and not
+    a pass."
+    [ -r "$MANIFEST" ] ||
+        fail "$MANIFEST is not readable, so nothing was inspected. That is a
+    permissions or I/O fault, not a pass."
+
+    count=0
+    while read -r file; do
+        [ -n "$file" ] || continue
+        [ -f "$file" ] ||
+            fail "$MANIFEST lists $file, which does not exist."
+        [ -s "$file" ] ||
+            fail "$MANIFEST lists $file, which is empty. An empty bundle
+    carries no marker and proves nothing, so this is a failure and not a pass."
+        read_marker "$file"
+        [ "$MARKER" = "$expected" ] ||
+            fail "$file is $MARKER but this build expects $expected."
+        echo "  ok: $file ($MARKER)"
+        count=$((count + 1))
+    done <"$MANIFEST"
+
+    [ "$count" -gt 0 ] || fail "no bundles were inspected."
+
+    check_unlisted_bundles
+
+    echo "verify-build: $count bundle(s) verified $expected"
+}
+
+main "$@"

scripts/apply-enrichment.mjs

@@ -1,161 +0,0 @@
-#!/usr/bin/env node
-// Apply enrichment data to tokenList.js: add name + url fields to each token.
-
-import { readFileSync, writeFileSync } from "fs";
-
-const enrichment = JSON.parse(
-    readFileSync("scripts/token-enrichment.json", "utf8"),
-);
-
-// Well-known URLs for major tokens not in ethereum-lists.
-// These are official project websites verified from public sources.
-const EXTRA_URLS = {
-    "0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2": "https://weth.io",
-    "0xdAC17F958D2ee523a2206206994597C13D831ec7": "https://tether.to",
-    "0xB8c77482e45F1F44dE1745F52C74426C631bDD52": "https://www.bnbchain.org",
-    "0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48": "https://www.circle.com/usdc",
-    "0xdC035D45d973E3EC169d2276DDab16f1e407384F": "https://sky.money",
-    "0x2AF5D2aD76741191D15Dfe7bF6aC92d4Bd912Ca3": "https://www.bitfinex.com",
-    "0x514910771AF9Ca656af840dff83E8264EcF986CA": "https://chain.link",
-    "0x4c9EDD5852cd905f086C759E8383e09bff1E68B3": "https://ethena.fi",
-    "0x8d0D000Ee44948FC98c9B98A4FA4921476f08B0d":
-        "https://www.worldlibertyfinancial.com",
-    "0x6B175474E89094C44Da98b954EedeAC495271d0F": "https://makerdao.com",
-    "0x6c3ea9036406852006290770BEdFcAbA0e23A0e8":
-        "https://www.paypal.com/us/digital-wallet/manage-money/crypto/pyusd",
-    "0x95aD61b0a150d79219dCF64E1E6Cc01f0B64C4cE": "https://shibatoken.com",
-    "0xdA5e1988097297dCdc1f90D4dFE7909e847CBeF6":
-        "https://www.worldlibertyfinancial.com",
-    "0xA0b73E1Ff0B80914AB6fe0444E65848C4C34450b": "https://crypto.com",
-    "0x582d872A1B094FC48F5DE31D3B73F2D9bE47def1": "https://ton.org",
-    "0x68749665FF8D2d112Fa859AA293F07A622782F38": "https://gold.tether.to",
-    "0x196C20DA81Fbc324EcdF55501e95Ce9f0bD84d14": "https://polkadot.network",
-    "0x1f9840a85d5aF5bf1D1762F925BDADdC4201F984": "https://uniswap.org",
-    "0x45804880De22913dAFE09f4980848ECE6EcbAf78":
-        "https://www.paxos.com/paxgold",
-    "0x3c3a81e81dc49A522A592e7622A7E711c06bf354": "https://www.mantle.xyz",
-    "0x7Fc66500c84A76Ad7e9c93437bFc5Ac33E2DDaE9": "https://aave.com",
-    "0x75231F58b43240C9718Dd58B4967c5114342a86c": "https://www.okx.com",
-    "0x6982508145454Ce325dDbE47a25d4ec3d2311933": "https://www.pepe.vip",
-    "0x2260FAC5E5542a773Aa44fBCfeDf7C193bc2C599": "https://wbtc.network",
-    "0xae7ab96520DE3A18E5e111B5EaAb095312D7fE84": "https://lido.fi",
-    "0x5A98FcBEA516Cf06857215779Fd812CA3beF1B32": "https://lido.fi",
-    "0xC18360217D8F7Ab5e7c516566761Ea12Ce7F9D72": "https://ens.domains",
-    "0x7D1AfA7B718fb893dB30A3aBc0Cfc608AaCfeBB0": "https://polygon.technology",
-    "0x9f8F72aA9304c8B593d555F12eF6589cC3A579A2": "https://makerdao.com",
-    "0xD533a949740bb3306d119CC777fa900bA034cd52": "https://curve.fi",
-    "0x111111111117dC0aa78b770fA6A738034120C302": "https://1inch.io",
-    "0x163f8C2467924be0ae7B5347228CABF260318753": "https://worldcoin.org",
-    "0xba100000625a3754423978a60c9317c58a424e3D": "https://balancer.fi",
-    "0xC011a73ee8576Fb46F5E1c5751cA3B9Fe0af2a6F": "https://synthetix.io",
-    "0x1a7e4e63778B4f12a199C062f3eFdD288afCBce8": "https://www.euler.finance",
-    "0xBBbbCA6A901c926F240b89EacB641d8Aec7AEafD": "https://loopring.org",
-    "0xC669928185DbCE49d2230CC9B0979BE6DC797957": "https://bitstable.finance",
-    "0x7f39C581F595B53c5cb19bD0b3f8dA6c935E2Ca0": "https://lido.fi",
-    "0xBe9895146f7AF43049ca1c1AE358B0541Ea49704":
-        "https://www.coinbase.com/cbeth",
-    "0xfAbA6f8e4a5E8Ab82F62fe7C39859FA577269BE3": "https://ondo.finance",
-    "0x0C10bF8FcB7Bf5412187A595ab97a3609160b5c6": "https://decentraland.org",
-    "0x6De037ef9aD2725EB40118Bb1702EBb27e4Aeb24": "https://www.render.com",
-    "0x4a220E6096B25EADb88358cb44068A3248254675": "https://www.quant.network",
-    "0xba5BDe662c17e2aDFF1075610382B9B691296350": "https://superrare.com",
-    "0x15D4c048F83bd7e37d49eA4C83a07267Ec4203dA": "https://galxe.com",
-    "0xc00e94Cb662C3520282E6f5717214004A7f26888": "https://compound.finance",
-    "0xE41d2489571d322189246DaFA5ebDe1F4699F498": "https://0x.org",
-    "0x0bc529c00C6401aEF6D220BE8C6Ea1667F6Ad93e": "https://yearn.fi",
-    "0x6fB3e0A217407EFFf7Ca062D46c26E5d60a14d69": "https://iotex.io",
-    "0xD31a59c85aE9D8edEFec411D448f90841571b89c": "https://solana.com",
-    "0xa1faa113cbE53436Df28FF0aEe54275c13B40975": "https://alphafinance.io",
-    "0xF57e7e7C23978C3cAEC3C3548E3D615c346e79fF": "https://immutable.com",
-    "0x0f5D2fB29fb7d3CFeE444a200298f468908cC942": "https://decentraland.org",
-    "0x3845badAde8e6dFF049820680d1F14bD3903a5d0": "https://www.sandbox.game",
-    "0x4d224452801ACEd8B2F0aebE155379bb5D594381": "https://apecoin.com",
-    "0x6810e776880C02933D47DB1b9fc05908e5386b96": "https://gnosis.io",
-    "0x5f98805A4E8be255a32880FDeC7F6728C6568bA0": "https://www.liquity.org",
-    "0xd26114cd6EE289AccF82350c8d8487fedB8A0C07": "https://omg.network",
-    "0x0D8775F648430679A709E98d2b0Cb6250d2887EF":
-        "https://basicattentiontoken.org",
-    "0xc944E90C64B2c07662A292be6244BDf05Cda44a7": "https://thegraph.com",
-    "0x1985365e9f78359a9B6AD760e32412f4a445E862": "https://augur.net",
-    "0x4E15361FD6b4BB609Fa63C81A2be19d873717870": "https://fantom.foundation",
-    "0x853d955aCEf822Db058eb8505911ED77F175b99e": "https://frax.finance",
-    "0x0000000000085d4780B73119b644AE5ecd22b376": "https://www.trueusd.com",
-    "0x0cEC1A9154Ff802e7934Fc916Ed7Ca50bDE6844e": "https://polymesh.network",
-    "0x956F47F50A910163D8BF957Cf5846D573E7f87CA": "https://fei.money",
-    "0x3432B6A60D23Ca0dFCa7761B7ab56459D9C964D0": "https://frax.finance",
-    "0xf939E0A03FB07F59A73314E73794Be0E57ac1b4E": "https://curve.fi",
-    "0x0100546F2cD4C9D97f798fFC9755E47865FF7Ee6": "https://alchemix.fi",
-    "0x808507121B80c02388fAd14726482e061B8da827": "https://pendle.finance",
-    "0xCa14007Eff0dB1f8135f4C25B34De49AB0d42766": "https://starknet.io",
-    "0x8457CA5040ad67fdebbCC8EdCE889A335Bc0fbFB": "https://alt.layer",
-    "0x4C19596f5aAfF459fA38B0f7eD92F11AE6543784": "https://www.truflation.com",
-    "0xB50721BCf8d664c30412Cfbc6cf7a15145234ad1": "https://arbitrum.io",
-    "0x912CE59144191C1204E64559FE8253a0e49E6548": "https://arbitrum.io",
-    "0x6985884C4392D348587B19cb9eAAf157F13271cd": "https://layerzero.network",
-    "0xFe0c30065B384F05761f15d0CC899D4F9F9Cc0eB": "https://ethfi.org",
-    "0x18084fbA666a33d37592fA2633fD49a74DD93a88": "https://tbtc.network",
-    "0x9D39A5DE30e57443BfF2A8307A4256c8797A3497": "https://suilend.fi",
-    "0x5283D291DBCF85356A21bA090E6db59121208b44": "https://blur.io",
-    "0x43Dfc4159D86F3A37A5A4B3D4580b888ad7d4DDd": "https://dydx.exchange",
-    "0xCf0C122c6b73ff809C693DB761e7BaeBe62b6a2E": "https://floki.com",
-    "0xe53EC727dbDEB9E2d5456c3be40cFF031AB40A55": "https://superfarm.com",
-    "0x32353A6C91143bfd6C7d363B546e62a9A2489A20": "https://www.agora.finance",
-    "0x1aBaEA1f7C830bD89Acc67eC4af516284b1bC33c": "https://www.euro-coin.com",
-    "0x1a03eF3d1a80b5f214e468ACD97F55714E049393": "https://gemspad.io",
-    "0x7122985656e38BDC0302Db86685bb972b145bD3C": "https://stone.fi",
-    "0xa35923162C49cF95e6BF26623385eb431ad920D3": "https://www.turbo-eth.com",
-    "0xdBdb4d16EdA451D0503b854CF79D55697F90c8DF": "https://alchemix.fi",
-    "0x08c32b0726C5684024ea6e141C50aDe9690bBdcc": "https://stratis.io",
-    "0x65Ef703f5594D2573eb71Aaf55BC0CB548492df4": "https://multichain.org",
-    "0x1151CB3d861920e07a38e03eEAd12C32178567F6": "https://bonk.com",
-    "0x090185f2135308BaD17527004364eBcC2D37e5F6": "https://spell.club",
-    "0xAf5191B0De278C7286d6C7CC6ab6BB8A73bA2Cd6": "https://stargate.finance",
-};
-
-// Apply extra URLs where enrichment has none
-for (const [addr, url] of Object.entries(EXTRA_URLS)) {
-    const e = enrichment[addr];
-    if (e && !e.url) {
-        e.url = url;
-    }
-}
-
-// Read original tokenList.js
-const original = readFileSync("src/shared/tokenList.js", "utf8");
-
-// Replace each token block: add name and url after decimals
-let result = original;
-let replacements = 0;
-
-for (const [addr, data] of Object.entries(enrichment)) {
-    // Escape special regex characters in the address
-    const escaped = addr.replace(/[.*+?^${}()|[\]\\]/g, "\\$&");
-
-    // Match the token block: { address: "...", symbol: "...", decimals: N, }
-    // The closing }, may have trailing whitespace
-    const blockRe = new RegExp(
-        `(\\{\\s*address:\\s*"${escaped}",\\s*symbol:\\s*"[^"]+",\\s*decimals:\\s*\\d+),?(\\s*\\})`,
-    );
-
-    const match = result.match(blockRe);
-    if (!match) {
-        console.error(`WARNING: Could not find block for ${addr}`);
-        continue;
-    }
-
-    // Build replacement: original fields + name + url
-    const nameEscaped = data.name.replace(/\\/g, "\\\\").replace(/"/g, '\\"');
-    const urlEscaped = data.url.replace(/\\/g, "\\\\").replace(/"/g, '\\"');
-    const replacement =
-        match[1] +
-        `,\n        name: "${nameEscaped}",` +
-        `\n        url: "${urlEscaped}",` +
-        match[2];
-
-    result = result.replace(blockRe, replacement);
-    replacements++;
-}
-
-console.error(`Applied ${replacements} enrichments to tokenList.js`);
-writeFileSync("src/shared/tokenList.js", result);
-console.error("Done!");

scripts/enrich-tokens.mjs

@@ -1,87 +0,0 @@
-#!/usr/bin/env node
-// Temporary script: fetch name + homepage URL for every token in tokenList.js
-// Phase 1: CoinGecko /coins/list (1 bulk call) for names — gets 100%
-// Phase 2: ethereum-lists GitHub repo for project URLs — gets ~15%
-
-import { readFileSync, writeFileSync } from "fs";
-
-const src = readFileSync("src/shared/tokenList.js", "utf8");
-
-const tokens = [];
-const re =
-    /\{\s*address:\s*"(0x[a-fA-F0-9]{40})",\s*symbol:\s*"([^"]+)",\s*decimals:\s*(\d+)/g;
-let m;
-while ((m = re.exec(src)) !== null) {
-    tokens.push({ address: m[1], symbol: m[2], decimals: parseInt(m[3]) });
-}
-console.error(`Parsed ${tokens.length} tokens`);
-
-const sleep = (ms) => new Promise((r) => setTimeout(r, ms));
-
-// --- Phase 1: bulk names from CoinGecko ---
-console.error("Fetching CoinGecko coins list...");
-const listResp = await fetch(
-    "https://api.coingecko.com/api/v3/coins/list?include_platform=true",
-);
-if (!listResp.ok) throw new Error(`CoinGecko list HTTP ${listResp.status}`);
-const coins = await listResp.json();
-
-const addrMap = new Map();
-for (const coin of coins) {
-    const eth = (coin.platforms?.ethereum || "").toLowerCase().trim();
-    if (eth && eth.startsWith("0x")) {
-        addrMap.set(eth, { name: coin.name, id: coin.id });
-    }
-}
-console.error(`CoinGecko map: ${addrMap.size} Ethereum tokens`);
-
-const enriched = new Map();
-for (const t of tokens) {
-    const info = addrMap.get(t.address.toLowerCase());
-    enriched.set(t.address, { name: info?.name || t.symbol, url: "" });
-}
-console.error(
-    `Matched ${[...enriched.values()].filter((e) => e.name).length}/${tokens.length} names`,
-);
-
-// --- Phase 2: ethereum-lists GitHub for URLs ---
-console.error("Fetching URLs from ethereum-lists GitHub...");
-const CONCURRENT = 10;
-let urlsFound = 0;
-
-for (let i = 0; i < tokens.length; i += CONCURRENT) {
-    const batch = tokens.slice(i, i + CONCURRENT);
-    await Promise.allSettled(
-        batch.map(async (t) => {
-            try {
-                const r = await fetch(
-                    `https://raw.githubusercontent.com/ethereum-lists/tokens/master/tokens/eth/${t.address}.json`,
-                );
-                if (!r.ok) return;
-                const data = await r.json();
-                const website = (data.website || "").trim();
-                if (website && website !== "https://") {
-                    enriched.get(t.address).url = website;
-                    urlsFound++;
-                }
-            } catch {
-                // ignore
-            }
-        }),
-    );
-    if (i % 100 === 0) {
-        console.error(
-            `  GitHub: ${Math.min(i + CONCURRENT, tokens.length)}/${tokens.length}, ${urlsFound} URLs`,
-        );
-    }
-    await sleep(200);
-}
-console.error(`Phase 2 done: ${urlsFound} URLs from ethereum-lists`);
-
-// --- Output ---
-const output = {};
-for (const [addr, e] of enriched) {
-    output[addr] = { name: e.name, url: e.url };
-}
-writeFileSync("scripts/token-enrichment.json", JSON.stringify(output, null, 2));
-console.error(`Done! ${tokens.length} names, ${urlsFound} URLs.`);

src/background/index.js

@@ -5,7 +5,6 @@
 const { DEFAULT_RPC_URL } = require("../shared/constants");
 const { SUPPORTED_CHAIN_IDS, networkByChainId } = require("../shared/networks");
 const { onChainSwitch } = require("../shared/chainSwitch");
-const { getBytes } = require("ethers");
 const {
     state,
     loadState,
@@ -13,14 +12,20 @@ const {
     currentNetwork,
 } = require("../shared/state");
 const { refreshBalances, getProvider } = require("../shared/balances");
-const { debugFetch } = require("../shared/log");
-const { decryptWithPassword } = require("../shared/vault");
-const { getSignerForAddress } = require("../shared/wallet");
+const { debugFetch, log } = require("../shared/log");
+const { verifySignedTx, verifySignature } = require("../shared/approvalVerify");
 const {
     isPhishingDomain,
-    updatePhishingList,
-    startPeriodicRefresh,
+    refreshPhishingListOnSchedule,
+    initPhishingList,
 } = require("../shared/phishingDomains");
+const {
+    BALANCE_REFRESH_ALARM,
+    PHISHING_REFRESH_ALARM,
+    BALANCE_REFRESH_PERIOD_MINUTES,
+    ensureRecurringAlarms,
+    registerAlarmHandlers,
+} = require("../shared/alarms");
 
 const storageApi =
     typeof browser !== "undefined"
@@ -593,12 +598,22 @@ async function broadcastAccountsChanged() {
 // Background balance refresh: every 60 seconds when the popup isn't open.
 // When the popup IS open, its 10-second interval keeps lastBalanceRefresh
 // fresh, so this naturally skips.
-const BACKGROUND_REFRESH_INTERVAL = 60000;
+//
+// The alarm period alone sets the cadence; this guard only suppresses a
+// refresh something else has just done, so it must stay strictly shorter than
+// the period. Timed to the period it would veto every tick it gates —
+// lastBalanceRefresh is stamped after the refresh runs, so a tick one period
+// after the last one always lands inside a guard of equal length and the real
+// cadence becomes two periods. Half the period keeps it comfortably above the
+// popup's 10-second refresh, so an open popup still suppresses the background
+// job, and comfortably below the alarm period, so the schedule always wins.
+const BALANCE_REFRESH_PERIOD_MS = BALANCE_REFRESH_PERIOD_MINUTES * 60 * 1000;
+const RECENT_BALANCE_REFRESH_MS = Math.floor(BALANCE_REFRESH_PERIOD_MS / 2);
 
 async function backgroundRefresh() {
     await loadState();
     const now = Date.now();
-    if (now - (state.lastBalanceRefresh || 0) < BACKGROUND_REFRESH_INTERVAL)
+    if (now - (state.lastBalanceRefresh || 0) < RECENT_BALANCE_REFRESH_MS)
         return;
     if (state.wallets.length === 0) return;
     await refreshBalances(
@@ -611,12 +626,58 @@ async function backgroundRefresh() {
     await saveState();
 }
 
-setInterval(backgroundRefresh, BACKGROUND_REFRESH_INTERVAL);
+// Both recurring jobs run off alarms, not timers. On Chrome MV3 this file is
+// a service worker that the browser terminates after about 30 seconds idle,
+// so a setInterval would only ever survive until the first idle period and
+// module-level state does not outlive it. Alarms are held by the browser and
+// wake the worker to deliver them.
+registerAlarmHandlers({
+    [BALANCE_REFRESH_ALARM]: backgroundRefresh,
+    // The scheduled refresh, which restores persisted state on a freshly
+    // revived worker and then fetches unconditionally. The freshness guards
+    // belong to the startup path; applying them here would make the tick skip
+    // itself.
+    [PHISHING_REFRESH_ALARM]: refreshPhishingListOnSchedule,
+});
 
-// Fetch the phishing domain blocklist delta on startup and refresh every 24h.
-// The vendored blocklist is bundled at build time; this fetches only new entries.
-updatePhishingList();
-startPeriodicRefresh();
+// Everything the background context needs re-established on start. This runs
+// on a fresh install, on browser startup, and on every revival of a
+// terminated worker, so it must be idempotent: ensureRecurringAlarms() only
+// creates alarms that are missing or carrying a stale period, and
+// initPhishingList() fetches only when the persisted timestamps say the list
+// is stale.
+//
+// On a fresh install the top-level call and the onInstalled listener both run,
+// close enough together that both could see an alarm missing and create it.
+// Sharing one in-flight run makes the "create only when missing" check
+// race-free; the memo is dropped once it settles so a later onStartup runs
+// again.
+let backgroundJobsRun = null;
+
+function startBackgroundJobs() {
+    if (backgroundJobsRun) return backgroundJobsRun;
+    backgroundJobsRun = Promise.all([
+        ensureRecurringAlarms(),
+        initPhishingList(),
+    ])
+        .catch((err) => {
+            // An alarm that failed to schedule means a recurring job silently
+            // never runs again; it must not be an unhandled rejection.
+            log.errorf("background job startup failed:", err);
+        })
+        .finally(() => {
+            backgroundJobsRun = null;
+        });
+    return backgroundJobsRun;
+}
+
+if (runtime.onInstalled) {
+    runtime.onInstalled.addListener(startBackgroundJobs);
+}
+if (runtime.onStartup) {
+    runtime.onStartup.addListener(startBackgroundJobs);
+}
+startBackgroundJobs();
 
 // When approval window is closed without a response, treat as rejection
 if (windowsApi && windowsApi.onRemoved) {
@@ -725,39 +786,28 @@ runtime.onMessage.addListener((msg, sender, sendResponse) => {
             return true;
         }
 
+        // The popup signs; it reports back here when it could not. Fail the
+        // request the same way this handler used to when it did the signing.
+        if (msg.error) {
+            approval.resolve({ error: { message: msg.error } });
+            sendResponse({ error: msg.error });
+            return false;
+        }
+
         (async () => {
             try {
                 await loadState();
                 const activeAddress = await getActiveAddress();
-                let wallet, addrIndex;
-                for (const w of state.wallets) {
-                    for (let i = 0; i < w.addresses.length; i++) {
-                        if (w.addresses[i].address === activeAddress) {
-                            wallet = w;
-                            addrIndex = i;
-                            break;
-                        }
-                    }
-                    if (wallet) break;
-                }
-                if (!wallet) throw new Error("Wallet not found");
-                // TODO(security): Move decryption to popup to avoid sending password via runtime.sendMessage
-                let decrypted = await decryptWithPassword(
-                    wallet.encryptedSecret,
-                    msg.password,
+                // The popup holds the secret, but the background stays the
+                // authority on what is broadcast: the raw transaction must be
+                // the approved one, signed by the approved address.
+                verifySignedTx(
+                    msg.rawSignedTx,
+                    approval.txParams,
+                    activeAddress,
                 );
-                const signer = getSignerForAddress(
-                    wallet,
-                    addrIndex,
-                    decrypted,
-                );
-                // Best-effort: clear decrypted secret after use.
-                // Note: JS strings are immutable; this nulls the reference but
-                // the original string may persist in memory until GC.
-                decrypted = null;
                 const provider = getProvider(state.rpcUrl);
-                const connected = signer.connect(provider);
-                const tx = await connected.sendTransaction(approval.txParams);
+                const tx = await provider.broadcastTransaction(msg.rawSignedTx);
                 approval.resolve({ txHash: tx.hash });
                 sendResponse({ txHash: tx.hash });
             } catch (e) {
@@ -784,55 +834,23 @@ runtime.onMessage.addListener((msg, sender, sendResponse) => {
             return true;
         }
 
+        // The popup signs; it reports back here when it could not. Fail the
+        // request the same way this handler used to when it did the signing.
+        if (msg.error) {
+            approval.resolve({ error: { message: msg.error } });
+            sendResponse({ error: msg.error });
+            return false;
+        }
+
         (async () => {
             try {
-                await loadState();
                 const activeAddress = await getActiveAddress();
-                let wallet, addrIndex;
-                for (const w of state.wallets) {
-                    for (let i = 0; i < w.addresses.length; i++) {
-                        if (w.addresses[i].address === activeAddress) {
-                            wallet = w;
-                            addrIndex = i;
-                            break;
-                        }
-                    }
-                    if (wallet) break;
-                }
-                if (!wallet) throw new Error("Wallet not found");
-                // TODO(security): Move decryption to popup to avoid sending password via runtime.sendMessage
-                let decrypted = await decryptWithPassword(
-                    wallet.encryptedSecret,
-                    msg.password,
-                );
-                const signer = getSignerForAddress(
-                    wallet,
-                    addrIndex,
-                    decrypted,
-                );
-                // Best-effort: clear decrypted secret after use.
-                // Note: JS strings are immutable; this nulls the reference but
-                // the original string may persist in memory until GC.
-                decrypted = null;
-
-                const sp = approval.signParams;
-                let signature;
-
-                if (sp.method === "personal_sign" || sp.method === "eth_sign") {
-                    signature = await signer.signMessage(getBytes(sp.message));
-                } else {
-                    // eth_signTypedData_v4 / eth_signTypedData
-                    const typedData = JSON.parse(sp.typedData);
-                    const { domain, types, message } = typedData;
-                    // ethers handles EIP712Domain internally
-                    delete types.EIP712Domain;
-                    signature = await signer.signTypedData(
-                        domain,
-                        types,
-                        message,
-                    );
-                }
-
+                // The popup holds the secret, but the background stays the
+                // authority on what is handed back to the page: the signature
+                // must cover the approved payload and recover to the approved
+                // address.
+                const signature = msg.signature;
+                verifySignature(approval.signParams, signature, activeAddress);
                 approval.resolve({ signature });
                 sendResponse({ signature });
             } catch (e) {

src/popup/index.html

@@ -136,7 +136,9 @@
                 <div id="add-wallet-section-xprv" class="hidden">
                     <p class="mb-2">
                         Paste your extended private key (xprv) below. This will
-                        import the HD wallet and scan for used addresses.
+                        import the HD wallet and scan for used addresses. It
+                        must be the master key for the wallet; an account-level
+                        or child key is not supported.
                     </p>
                     <div class="mb-2">
                         <input
@@ -582,10 +584,18 @@
                     <div id="confirm-balance" class="text-xs"></div>
                 </div>
                 <div id="confirm-fee" class="mb-3" style="visibility: hidden">
-                    <div class="text-xs text-muted mb-1">
-                        Estimated network fee
-                    </div>
+                    <div class="text-xs text-muted mb-1">Network fee</div>
                     <div id="confirm-fee-amount" class="text-xs"></div>
+                    <!-- Holds its one line of space from the first paint, so
+                    the reserve appearing when the estimate lands moves
+                    nothing. The placeholder is never seen. -->
+                    <div
+                        id="confirm-fee-reserve"
+                        class="text-xs text-muted"
+                        style="visibility: hidden"
+                    >
+                        reserve pending
+                    </div>
                 </div>
                 <div
                     id="confirm-warnings"
@@ -647,6 +657,31 @@
                     class="mb-2 border border-border border-dashed p-2"
                     style="visibility: hidden; min-height: 1.25rem"
                 ></div>
+                <div
+                    id="confirm-amount-fee-error"
+                    class="mb-2 border border-border border-dashed p-2 text-xs"
+                    style="visibility: hidden"
+                >
+                    Your balance does not cover this amount plus the network
+                    fee. Please go back and send a smaller amount.
+                </div>
+                <div
+                    id="confirm-gas-error"
+                    class="mb-2 border border-border border-dashed p-2 text-xs"
+                    style="visibility: hidden"
+                >
+                    You do not have enough ETH to pay the network fee for this
+                    transfer. Please add ETH to this address and try again.
+                </div>
+                <div
+                    id="confirm-fee-unknown-error"
+                    class="mb-2 border border-border border-dashed p-2 text-xs"
+                    style="visibility: hidden"
+                >
+                    The network fee could not be estimated, so this transaction
+                    cannot be checked against your balance. Please go back and
+                    try again.
+                </div>
                 <div class="mb-2">
                     <label class="block mb-1 text-xs">Password</label>
                     <input
@@ -869,6 +904,12 @@
                         />
                         Show tracked tokens with zero balance
                     </label>
+                    <label
+                        class="text-xs flex items-center gap-1 cursor-pointer mb-2"
+                    >
+                        <input type="checkbox" id="settings-utc-timestamps" />
+                        UTC Timestamps
+                    </label>
                     <div class="text-xs flex items-center gap-1">
                         <label for="settings-theme">Theme:</label>
                         <select
@@ -948,6 +989,15 @@
                         transfers and prevent interaction with suspicious
                         tokens.
                     </p>
+                    <label
+                        class="text-xs flex items-center gap-1 cursor-pointer mb-2"
+                    >
+                        <input
+                            type="checkbox"
+                            id="settings-hide-spoofed-symbols"
+                        />
+                        Hide fake tokens impersonating a known symbol
+                    </label>
                     <label
                         class="text-xs flex items-center gap-1 cursor-pointer mb-2"
                     >
@@ -979,12 +1029,6 @@
                         />
                         <span class="text-xs text-muted">gwei</span>
                     </div>
-                    <label
-                        class="text-xs flex items-center gap-1 cursor-pointer mb-1"
-                    >
-                        <input type="checkbox" id="settings-utc-timestamps" />
-                        UTC Timestamps
-                    </label>
                 </div>
 
                 <div class="bg-well p-3 mx-1 mb-3">
@@ -1002,6 +1046,64 @@
                     </p>
                     <div id="settings-denied-sites"></div>
                 </div>
+
+                <div class="bg-well p-3 mx-1 mb-3">
+                    <h3 class="font-bold mb-1">About</h3>
+                    <p class="text-xs mb-2">
+                        <a
+                            href="https://git.eeqj.de/sneak/AutistMask"
+                            class="underline decoration-dashed"
+                            target="_blank"
+                            rel="noopener noreferrer"
+                            >AutistMask</a
+                        >
+                        — Minimal Ethereum wallet browser extension.
+                    </p>
+                    <div class="text-xs">
+                        <div class="mb-1">
+                            <span class="text-muted">License:</span>
+                            <span id="about-license"></span>
+                        </div>
+                        <div class="mb-1">
+                            <span class="text-muted">Author:</span>
+                            <span id="about-author"></span>
+                        </div>
+                        <div class="mb-1">
+                            <span class="text-muted">Version:</span>
+                            <span
+                                id="about-version"
+                                class="cursor-pointer select-none"
+                            ></span>
+                        </div>
+                        <div class="mb-1">
+                            <span class="text-muted">Release date:</span>
+                            <span id="about-release-date"></span>
+                        </div>
+                        <div>
+                            <span class="text-muted">Commit:</span>
+                            <a
+                                id="about-commit-link"
+                                class="underline decoration-dashed"
+                                target="_blank"
+                                rel="noopener noreferrer"
+                            ></a>
+                        </div>
+                    </div>
+                </div>
+
+                <div
+                    id="settings-debug-well"
+                    class="bg-well p-3 mx-1 mb-3"
+                    style="display: none"
+                >
+                    <h3 class="font-bold mb-1">Debug</h3>
+                    <label
+                        class="text-xs flex items-center gap-1 cursor-pointer"
+                    >
+                        <input type="checkbox" id="settings-debug-mode" />
+                        Enable debug mode
+                    </label>
+                </div>
             </div>
 
             <!-- ============ DELETE WALLET CONFIRM ============ -->
@@ -1040,6 +1142,52 @@
                 </button>
             </div>
 
+            <!-- ============ SHOW RECOVERY PHRASE ============ -->
+            <div id="view-show-phrase" class="view hidden">
+                <button
+                    id="btn-show-phrase-back"
+                    class="border border-border px-2 py-1 hover:bg-fg hover:text-bg cursor-pointer mb-2"
+                >
+                    &lt; Back
+                </button>
+                <h2 class="font-bold mb-1">Recovery Phrase</h2>
+                <p class="text-xs mb-3" id="show-phrase-wallet-name"></p>
+                <div
+                    class="text-xs mb-3 border border-border border-dashed p-2"
+                >
+                    Anyone who has these words can take every coin and token in
+                    this wallet, from any device, without your password. Never
+                    type them into a website and never show them to anyone.
+                </div>
+                <div
+                    id="show-phrase-flash"
+                    class="text-xs text-red-500 mb-2 min-h-[1.25rem]"
+                    style="visibility: hidden"
+                ></div>
+                <div id="show-phrase-password-section" class="mb-2">
+                    <label class="block mb-1">Password</label>
+                    <input
+                        type="password"
+                        id="show-phrase-password"
+                        class="border border-border p-1 w-full font-mono text-sm bg-bg text-fg"
+                        placeholder="Enter your password to continue"
+                    />
+                    <button
+                        id="btn-show-phrase-reveal"
+                        class="border border-border px-2 py-1 hover:bg-fg hover:text-bg cursor-pointer mt-2"
+                    >
+                        Reveal
+                    </button>
+                </div>
+                <div id="show-phrase-result" class="hidden">
+                    <div
+                        id="show-phrase-value"
+                        class="bg-danger-well rounded p-2 font-mono text-xs break-all cursor-pointer mb-1"
+                        title="Click to copy"
+                    ></div>
+                </div>
+            </div>
+
             <!-- ============ SETTINGS: ADD TOKEN ============ -->
             <div id="view-settings-addtoken" class="view hidden">
                 <button

src/popup/index.js

@@ -1,24 +1,24 @@
 // AutistMask popup entry point.
 // Loads state, initializes views, triggers first render.
 
-const { DEBUG } = require("../shared/constants");
-const {
-    state,
-    saveState,
-    loadState,
-    currentNetwork,
-} = require("../shared/state");
+const { state, saveState, loadState } = require("../shared/state");
+const { setRuntimeDebug } = require("../shared/log");
 const { refreshPrices } = require("../shared/prices");
 const { refreshBalances } = require("../shared/balances");
 const {
     $,
     showView,
+    updateDebugBanner,
     setRenderMain,
     pushCurrentView,
     goBack,
     clearViewStack,
 } = require("./views/helpers");
 const { applyTheme } = require("./theme");
+// Views that can be fully re-rendered from persisted state. All others fall
+// back to the nearest restorable parent; see the module for why the
+// secret-bearing views are absent.
+const { RESTORABLE_VIEWS } = require("./restorableViews");
 
 const home = require("./views/home");
 const welcome = require("./views/welcome");
@@ -103,21 +103,6 @@ const ctx = {
     },
 };
 
-// Views that can be fully re-rendered from persisted state.
-// All others fall back to the nearest restorable parent.
-const RESTORABLE_VIEWS = new Set([
-    "main",
-    "address",
-    "address-token",
-    "receive",
-    "settings",
-    "settings-addtoken",
-    "confirm-tx",
-    "transaction",
-    "success-tx",
-    "error-tx",
-]);
-
 function needsAddress(view) {
     return (
         view === "address" ||
@@ -209,21 +194,11 @@ async function init() {
     await loadState();
     applyTheme(state.theme);
 
-    const net = currentNetwork();
-    if (DEBUG || net.isTestnet) {
-        const banner = document.createElement("div");
-        banner.id = "debug-banner";
-        if (DEBUG && net.isTestnet) {
-            banner.textContent = "DEBUG / INSECURE [TESTNET]";
-        } else if (net.isTestnet) {
-            banner.textContent = "[TESTNET]";
-        } else {
-            banner.textContent = "DEBUG / INSECURE";
-        }
-        banner.style.cssText =
-            "background:#c00;color:#fff;text-align:center;font-size:10px;padding:1px 0;font-family:monospace;position:sticky;top:0;z-index:9999;";
-        document.body.prepend(banner);
-    }
+    // Sync runtime debug flag from persisted state before first render
+    setRuntimeDebug(state.debugMode);
+
+    // Create the debug/testnet banner if needed (uses runtime debug state)
+    updateDebugBanner();
 
     // Auto-default active address
     if (

src/popup/restorableViews.js

@@ -0,0 +1,29 @@
+// Views the popup may reopen onto.
+//
+// The popup persists the current view so that reopening the toolbar popup
+// lands the user back where they were. Only views that can be fully
+// re-rendered from persisted state belong here; every other view falls back
+// to the nearest restorable parent (src/popup/index.js restoreView()).
+//
+// A view that displays a secret must NEVER be listed. Restoring onto one
+// would put a private key or a recovery phrase on screen with no password
+// prompt in front of it, on a popup the user may have reopened by accident.
+// That is why "export-privkey" and "show-phrase" are absent.
+//
+// Kept in its own module, with no dependencies, so tests can assert the
+// exclusion directly rather than trusting a reading of the popup entry
+// point, which cannot be required outside a browser.
+const RESTORABLE_VIEWS = new Set([
+    "main",
+    "address",
+    "address-token",
+    "receive",
+    "settings",
+    "settings-addtoken",
+    "confirm-tx",
+    "transaction",
+    "success-tx",
+    "error-tx",
+]);
+
+module.exports = { RESTORABLE_VIEWS };

src/popup/styles/main.css

@@ -10,7 +10,7 @@
     --color-border: #000000;
     --color-border-light: #cccccc;
     --color-hover: #eeeeee;
-    --color-well: #f5f5f5;
+    --color-well: #e8e8e8;
     --color-danger-well: #fef2f2;
     --color-section: #dddddd;
 }

src/popup/views/addToken.js

@@ -1,4 +1,4 @@
-const { $, showFlash, goBack } = require("./helpers");
+const { $, showView, showFlash, goBack } = require("./helpers");
 const { getTopTokens } = require("../../shared/tokenList");
 const { state, saveState } = require("../../shared/state");
 const { lookupTokenInfo } = require("../../shared/balances");

src/popup/views/addWallet.js

@@ -6,6 +6,7 @@ const {
     addressFromPrivateKey,
     hdWalletFromXprv,
     isValidXprv,
+    isMasterExtendedKey,
 } = require("../../shared/wallet");
 const { encryptWithPassword } = require("../../shared/vault");
 const { state, saveState } = require("../../shared/state");
@@ -213,14 +214,25 @@ async function importXprvKey(ctx) {
         return;
     }
     if (!isValidXprv(xprv)) {
-        showFlash("Invalid extended private key.");
+        showFlash(
+            "That extended private key is not valid. Please check it and try again.",
+        );
+        return;
+    }
+    if (!isMasterExtendedKey(xprv)) {
+        showFlash(
+            "That is an account-level or child key, which cannot be imported. " +
+                "Please paste the master extended private key for the wallet.",
+        );
         return;
     }
     let result;
     try {
         result = hdWalletFromXprv(xprv);
     } catch (e) {
-        showFlash("Invalid extended private key.");
+        showFlash(
+            "That extended private key is not valid. Please check it and try again.",
+        );
         return;
     }
     const { xpub, firstAddress } = result;

src/popup/views/addressDetail.js

@@ -29,6 +29,16 @@ const { log } = require("../../shared/log");
 const makeBlockie = require("ethereum-blockies-base64");
 const { decryptWithPassword } = require("../../shared/vault");
 const { getSignerForAddress } = require("../../shared/wallet");
+const { walletDefect } = require("../../shared/walletDefects");
+
+// The defect of the wallet the selected address belongs to, or null. Both the
+// send and the private-key export path check it before asking for a password,
+// so a wallet that cannot derive its keys says so instead of failing after the
+// user has typed one in.
+function selectedWalletDefect() {
+    if (state.selectedWallet === null) return null;
+    return walletDefect(state.wallets[state.selectedWallet]);
+}
 
 let ctx;
 
@@ -148,6 +158,7 @@ async function loadTransactions(address) {
             state.blockscoutUrl,
         );
         const result = filterTransactions(rawTxs, {
+            hideSpoofedSymbols: state.hideSpoofedSymbols,
             hideLowHolderTokens: state.hideLowHolderTokens,
             hideFraudContracts: state.hideFraudContracts,
             hideDustTransactions: state.hideDustTransactions,
@@ -253,6 +264,11 @@ function init(_ctx) {
     });
 
     $("btn-send").addEventListener("click", () => {
+        const defect = selectedWalletDefect();
+        if (defect) {
+            showFlash(defect.shortMessage);
+            return;
+        }
         const addr =
             state.wallets[state.selectedWallet].addresses[
                 state.selectedAddress
@@ -297,6 +313,14 @@ function init(_ctx) {
     $("btn-export-privkey").addEventListener("click", () => {
         moreDropdown.classList.add("hidden");
         moreBtn.classList.remove("bg-fg", "text-bg");
+        // There is no private key to export for an address this wallet
+        // cannot derive. Without this the export screen would take a
+        // password and then report it as wrong.
+        const defect = selectedWalletDefect();
+        if (defect) {
+            showFlash(defect.shortMessage);
+            return;
+        }
         pushCurrentView();
         const wallet = state.wallets[state.selectedWallet];
         const addr = wallet.addresses[state.selectedAddress];

src/popup/views/addressToken.js

@@ -35,6 +35,7 @@ const {
 } = require("./send");
 const { log } = require("../../shared/log");
 const makeBlockie = require("ethereum-blockies-base64");
+const { walletDefect } = require("../../shared/walletDefects");
 
 let ctx;
 
@@ -222,6 +223,7 @@ async function loadTransactions(address, tokenId) {
             state.blockscoutUrl,
         );
         const result = filterTransactions(rawTxs, {
+            hideSpoofedSymbols: state.hideSpoofedSymbols,
             hideLowHolderTokens: state.hideLowHolderTokens,
             hideFraudContracts: state.hideFraudContracts,
             hideDustTransactions: state.hideDustTransactions,
@@ -337,6 +339,11 @@ function init(_ctx) {
     });
 
     $("btn-address-token-send").addEventListener("click", () => {
+        const defect = walletDefect(state.wallets[state.selectedWallet]);
+        if (defect) {
+            showFlash(defect.shortMessage);
+            return;
+        }
         const addr =
             state.wallets[state.selectedWallet].addresses[
                 state.selectedAddress

src/popup/views/approval.js

@@ -9,10 +9,20 @@ const {
     attachCopyHandlers,
 } = require("./helpers");
 const { state, saveState, currentNetwork } = require("../../shared/state");
-const { formatEther, formatUnits, Interface, toUtf8String } = require("ethers");
+const {
+    formatEther,
+    formatUnits,
+    getBytes,
+    Interface,
+    toUtf8String,
+} = require("ethers");
 const { getPrice, formatUsd } = require("../../shared/prices");
 const { ERC20_ABI } = require("../../shared/constants");
 const { TOKEN_BY_ADDRESS } = require("../../shared/tokenList");
+const { decryptWithPassword } = require("../../shared/vault");
+const { getSignerForAddress } = require("../../shared/wallet");
+const { walletDefect } = require("../../shared/walletDefects");
+const { getProvider } = require("../../shared/balances");
 const txStatus = require("./txStatus");
 const uniswap = require("../../shared/uniswap");
 const runtime =
@@ -153,6 +163,8 @@ function showTxApproval(details) {
         details.isPhishingDomain,
     );
 
+    pendingTxParams = details.txParams;
+
     const toAddr = details.txParams.to;
     const token = toAddr ? TOKEN_BY_ADDRESS.get(toAddr.toLowerCase()) : null;
     const ethValue = formatEther(details.txParams.value || "0");
@@ -269,6 +281,7 @@ function showTxApproval(details) {
 
     showView("approve-tx");
     attachCopyHandlers("view-approve-tx");
+    gateOnWalletDefect("approve-tx-error", "btn-approve-tx");
 }
 
 function decodeHexMessage(hex) {
@@ -326,6 +339,7 @@ function showSignApproval(details) {
     );
 
     const sp = details.signParams;
+    pendingSignParams = sp;
 
     $("approve-sign-hostname").textContent = details.hostname;
     $("approve-sign-from").innerHTML = approvalAddressHtml(sp.from);
@@ -367,6 +381,7 @@ function showSignApproval(details) {
 
     showView("approve-sign");
     attachCopyHandlers("view-approve-sign");
+    gateOnWalletDefect("approve-sign-error", "btn-approve-sign");
 }
 
 function show(id) {
@@ -401,6 +416,50 @@ function show(id) {
 
 let approvalId = null;
 let pendingTxDetails = null;
+// The exact parameters shown to the user, kept so the popup signs what it
+// displayed rather than re-fetching anything at approval time. Both are
+// repopulated by show() when the popup is closed and reopened.
+let pendingTxParams = null;
+let pendingSignParams = null;
+
+// Approve buttons stay disabled and muted while the popup derives the key and
+// signs, which is slow enough (Argon2id) that a double click is likely.
+function setTxButtonBusy(busy) {
+    $("btn-approve-tx").disabled = busy;
+    $("btn-approve-tx").classList.toggle("text-muted", busy);
+}
+
+function setSignButtonBusy(busy) {
+    $("btn-approve-sign").disabled = busy;
+    $("btn-approve-sign").classList.toggle("text-muted", busy);
+}
+
+// Say so on the approval screen itself, and disable the approve button, when
+// the active address belongs to a wallet whose keys cannot be derived. Without
+// this the screen would take a password and fail after deriving it. Reject
+// stays available; the wallet is not touched. Returns true when it gated.
+function gateOnWalletDefect(errorId, buttonId) {
+    const active = findActiveWallet();
+    const defect = active ? walletDefect(active.wallet) : null;
+    if (!defect) return false;
+    showError(errorId, defect.shortMessage);
+    $(buttonId).disabled = true;
+    $(buttonId).classList.add("text-muted");
+    return true;
+}
+
+// Locate the wallet and the address index owning the currently active
+// address. Returns null when no wallet holds it.
+function findActiveWallet() {
+    for (const wallet of state.wallets) {
+        for (let i = 0; i < wallet.addresses.length; i++) {
+            if (wallet.addresses[i].address === state.activeAddress) {
+                return { wallet, addrIndex: i };
+            }
+        }
+    }
+    return null;
+}
 
 function init(ctx) {
     $("approve-remember").addEventListener("change", async () => {
@@ -430,25 +489,86 @@ function init(ctx) {
         window.close();
     });
 
-    $("btn-approve-tx").addEventListener("click", () => {
-        const password = $("approve-tx-password").value;
+    $("btn-approve-tx").addEventListener("click", async () => {
+        let password = $("approve-tx-password").value;
         if (!password) {
             showError("approve-tx-error", "Please enter your password.");
             return;
         }
         hideError("approve-tx-error");
-        $("btn-approve-tx").disabled = true;
-        $("btn-approve-tx").classList.add("text-muted");
+        setTxButtonBusy(true);
 
-        runtime.sendMessage(
-            {
+        const active = findActiveWallet();
+        if (!active) {
+            password = null;
+            showError(
+                "approve-tx-error",
+                "No wallet was found for the active address.",
+            );
+            setTxButtonBusy(false);
+            return;
+        }
+
+        const defect = walletDefect(active.wallet);
+        if (defect) {
+            password = null;
+            showError("approve-tx-error", defect.shortMessage);
+            setTxButtonBusy(false);
+            return;
+        }
+
+        // Decrypt here, in the popup. The password must never cross the
+        // extension messaging boundary; only the signed transaction does.
+        let decryptedSecret;
+        try {
+            decryptedSecret = await decryptWithPassword(
+                active.wallet.encryptedSecret,
+                password,
+            );
+        } catch {
+            showError(
+                "approve-tx-error",
+                "That password is incorrect. Please try again.",
+            );
+            setTxButtonBusy(false);
+            return;
+        } finally {
+            // Best-effort: drop the password as soon as the key derivation
+            // is done. Note that JS strings are immutable; this clears the
+            // reference but the original string may persist until GC.
+            password = null;
+        }
+
+        const payload = {
             type: "AUTISTMASK_TX_RESPONSE",
             id: approvalId,
             approved: true,
-                // TODO(security): Move decryption to popup to avoid sending password via runtime.sendMessage
-                password: password,
-            },
-            (response) => {
+        };
+        try {
+            const signer = getSignerForAddress(
+                active.wallet,
+                active.addrIndex,
+                decryptedSecret,
+            );
+            const provider = getProvider(state.rpcUrl);
+            const connected = signer.connect(provider);
+            // This is the sequence ethers' own sendTransaction() runs
+            // internally, so nonce, gas, fee and chain id population are
+            // identical to when the background did the signing.
+            const populated =
+                await connected.populateTransaction(pendingTxParams);
+            delete populated.from;
+            payload.rawSignedTx = await connected.signTransaction(populated);
+        } catch (e) {
+            payload.error =
+                e.shortMessage || e.message || "Transaction signing failed.";
+        } finally {
+            // Best-effort: clear the decrypted secret after use, with the
+            // same immutability caveat as the password above.
+            decryptedSecret = null;
+        }
+
+        runtime.sendMessage(payload, (response) => {
             if (response && response.txHash) {
                 txStatus.showWait(pendingTxDetails, response.txHash);
             } else {
@@ -456,8 +576,7 @@ function init(ctx) {
                     (response && response.error) || "Transaction failed.";
                 txStatus.showError(pendingTxDetails, null, msg);
             }
-            },
-        );
+        });
     });
 
     $("btn-reject-tx").addEventListener("click", () => {
@@ -469,36 +588,101 @@ function init(ctx) {
         window.close();
     });
 
-    $("btn-approve-sign").addEventListener("click", () => {
-        const password = $("approve-sign-password").value;
+    $("btn-approve-sign").addEventListener("click", async () => {
+        let password = $("approve-sign-password").value;
         if (!password) {
             showError("approve-sign-error", "Please enter your password.");
             return;
         }
         hideError("approve-sign-error");
-        $("btn-approve-sign").disabled = true;
-        $("btn-approve-sign").classList.add("text-muted");
+        setSignButtonBusy(true);
 
-        runtime.sendMessage(
-            {
+        const active = findActiveWallet();
+        if (!active) {
+            password = null;
+            showError(
+                "approve-sign-error",
+                "No wallet was found for the active address.",
+            );
+            setSignButtonBusy(false);
+            return;
+        }
+
+        const defect = walletDefect(active.wallet);
+        if (defect) {
+            password = null;
+            showError("approve-sign-error", defect.shortMessage);
+            setSignButtonBusy(false);
+            return;
+        }
+
+        // Decrypt here, in the popup. The password must never cross the
+        // extension messaging boundary; only the signature does.
+        let decryptedSecret;
+        try {
+            decryptedSecret = await decryptWithPassword(
+                active.wallet.encryptedSecret,
+                password,
+            );
+        } catch {
+            showError(
+                "approve-sign-error",
+                "That password is incorrect. Please try again.",
+            );
+            setSignButtonBusy(false);
+            return;
+        } finally {
+            // Best-effort: drop the password as soon as the key derivation
+            // is done. Note that JS strings are immutable; this clears the
+            // reference but the original string may persist until GC.
+            password = null;
+        }
+
+        const payload = {
             type: "AUTISTMASK_SIGN_RESPONSE",
             id: approvalId,
             approved: true,
-                // TODO(security): Move decryption to popup to avoid sending password via runtime.sendMessage
-                password: password,
-            },
-            (response) => {
+        };
+        try {
+            const signer = getSignerForAddress(
+                active.wallet,
+                active.addrIndex,
+                decryptedSecret,
+            );
+            const sp = pendingSignParams;
+            if (sp.method === "personal_sign" || sp.method === "eth_sign") {
+                payload.signature = await signer.signMessage(
+                    getBytes(sp.message),
+                );
+            } else {
+                // eth_signTypedData_v4 / eth_signTypedData
+                const typedData = JSON.parse(sp.typedData);
+                const { domain, types, message } = typedData;
+                // ethers handles EIP712Domain internally
+                delete types.EIP712Domain;
+                payload.signature = await signer.signTypedData(
+                    domain,
+                    types,
+                    message,
+                );
+            }
+        } catch (e) {
+            payload.error = e.shortMessage || e.message || "Signing failed.";
+        } finally {
+            // Best-effort: clear the decrypted secret after use, with the
+            // same immutability caveat as the password above.
+            decryptedSecret = null;
+        }
+
+        runtime.sendMessage(payload, (response) => {
             if (response && response.signature) {
                 window.close();
             } else {
-                    const msg =
-                        (response && response.error) || "Signing failed.";
+                const msg = (response && response.error) || "Signing failed.";
                 showError("approve-sign-error", msg);
-                    $("btn-approve-sign").disabled = false;
-                    $("btn-approve-sign").classList.remove("text-muted");
+                setSignButtonBusy(false);
             }
-            },
-        );
+        });
     });
 
     $("btn-reject-sign").addEventListener("click", () => {

src/popup/views/confirmTx.js

@@ -32,11 +32,24 @@ const {
     getFullWarnings,
 } = require("../../shared/addressWarnings");
 const { ERC20_ABI, isBurnAddress } = require("../../shared/constants");
+const {
+    CODES,
+    FEE_PENDING,
+    FEE_KNOWN,
+    FEE_UNAVAILABLE,
+    feeReserveWei,
+    feeEstimateWei,
+    validateTransfer,
+} = require("../../shared/txValidation");
 const { log } = require("../../shared/log");
 const makeBlockie = require("ethereum-blockies-base64");
 const txStatus = require("./txStatus");
 
 let pendingTx = null;
+// Network fee for the transaction currently on screen. Reset by show() and
+// filled in by estimateGas() when the estimate resolves or fails.
+let feeStatus = FEE_PENDING;
+let feeWei = null;
 
 function restore() {
     const d = state.viewData;
@@ -67,6 +80,8 @@ function valueWithUsd(text, usdAmount) {
 
 function show(txInfo) {
     pendingTx = txInfo;
+    feeStatus = FEE_PENDING;
+    feeWei = null;
 
     const isErc20 = txInfo.token !== "ETH";
     const symbol = isErc20 ? txInfo.tokenSymbol || "?" : "ETH";
@@ -153,50 +168,14 @@ function show(txInfo) {
         warningsEl.style.visibility = "hidden";
     }
 
-    // Check for errors
-    const errors = [];
-    if (isErc20) {
-        const tokenBal = parseFloat(txInfo.tokenBalance || "0");
-        if (parseFloat(txInfo.amount) > tokenBal) {
-            errors.push(
-                "Insufficient " +
-                    symbol +
-                    " balance. You have " +
-                    txInfo.tokenBalance +
-                    " " +
-                    symbol +
-                    " but are trying to send " +
-                    txInfo.amount +
-                    " " +
-                    symbol +
-                    ".",
-            );
-        }
-    } else if (parseFloat(txInfo.amount) > parseFloat(txInfo.balance)) {
-        errors.push(
-            "Insufficient balance. You have " +
-                txInfo.balance +
-                " ETH but are trying to send " +
-                txInfo.amount +
-                " ETH.",
-        );
-    }
+    // The two fee messages are mutually exclusive per transaction type, and
+    // the type is known here, before the first paint. Drop the one that can
+    // never apply and reserve the space of the one that can, so the async
+    // estimate landing later never moves anything.
+    $("confirm-amount-fee-error").classList.toggle("hidden", isErc20);
+    $("confirm-gas-error").classList.toggle("hidden", !isErc20);
 
-    const errorsEl = $("confirm-errors");
-    const sendBtn = $("btn-confirm-send");
-    if (errors.length > 0) {
-        errorsEl.innerHTML = errors
-            .map((e) => `<div class="text-xs">${e}</div>`)
-            .join("");
-        errorsEl.style.visibility = "visible";
-        sendBtn.disabled = true;
-        sendBtn.classList.add("text-muted");
-    } else {
-        errorsEl.innerHTML = "";
-        errorsEl.style.visibility = "hidden";
-        sendBtn.disabled = false;
-        sendBtn.classList.remove("text-muted");
-    }
+    renderValidation(txInfo);
 
     // Reset password field and error
     $("confirm-tx-password").value = "";
@@ -205,6 +184,7 @@ function show(txInfo) {
     // Gas estimate — show placeholder then fetch async
     $("confirm-fee").style.visibility = "visible";
     $("confirm-fee-amount").textContent = "Estimating...";
+    setVisible("confirm-fee-reserve", false);
     state.viewData = { pendingTx: txInfo };
     showView("confirm-tx");
     attachCopyHandlers("view-confirm-tx");
@@ -224,11 +204,101 @@ function show(txInfo) {
     checkRecipientHistory(txInfo);
 }
 
+// Render the balance check for the transaction on screen. Called once during
+// show() and again when the fee estimate resolves or fails. Every element it
+// touches already occupies its space, so re-running it never moves anything.
+function renderValidation(txInfo) {
+    const isErc20 = txInfo.token !== "ETH";
+    const symbol = isErc20 ? txInfo.tokenSymbol || "?" : "ETH";
+
+    const { canSend, codes } = validateTransfer({
+        isErc20,
+        amount: txInfo.amount,
+        ethBalance: txInfo.balance,
+        tokenBalance: txInfo.tokenBalance,
+        feeStatus,
+        feeWei,
+    });
+
+    // Messages carrying the user's own numbers are built here; the fixed
+    // sentences live in the reserved elements in index.html.
+    const messages = [];
+    if (codes.includes(CODES.AMOUNT_INVALID)) {
+        messages.push("Please enter a valid amount to send.");
+    }
+    if (codes.includes(CODES.INSUFFICIENT_TOKEN)) {
+        messages.push(
+            "Insufficient " +
+                symbol +
+                " balance. You have " +
+                txInfo.tokenBalance +
+                " " +
+                symbol +
+                " but are trying to send " +
+                txInfo.amount +
+                " " +
+                symbol +
+                ".",
+        );
+    }
+    if (codes.includes(CODES.INSUFFICIENT_ETH)) {
+        messages.push(
+            "Insufficient balance. You have " +
+                txInfo.balance +
+                " ETH but are trying to send " +
+                txInfo.amount +
+                " ETH.",
+        );
+    }
+
+    const errorsEl = $("confirm-errors");
+    if (messages.length > 0) {
+        errorsEl.innerHTML = messages
+            .map((m) => `<div class="text-xs">${escapeHtml(m)}</div>`)
+            .join("");
+        errorsEl.style.visibility = "visible";
+    } else {
+        errorsEl.innerHTML = "";
+        errorsEl.style.visibility = "hidden";
+    }
+
+    setVisible(
+        "confirm-amount-fee-error",
+        codes.includes(CODES.INSUFFICIENT_ETH_WITH_FEE),
+    );
+    setVisible(
+        "confirm-gas-error",
+        codes.includes(CODES.INSUFFICIENT_ETH_FOR_FEE),
+    );
+    setVisible(
+        "confirm-fee-unknown-error",
+        codes.includes(CODES.FEE_UNAVAILABLE),
+    );
+
+    // While the estimate is in flight there is no error to show — the fee
+    // line already reads "Estimating..." — but sending stays blocked so a
+    // transaction the fee would break cannot be signed in the meantime.
+    const sendBtn = $("btn-confirm-send");
+    sendBtn.disabled = !canSend;
+    sendBtn.classList.toggle("text-muted", !canSend);
+}
+
+function setVisible(id, visible) {
+    $(id).style.visibility = visible ? "visible" : "hidden";
+}
+
+// A fee in wei as an ETH string, truncated to 6 decimal places.
+function formatFeeEth(wei) {
+    const parts = formatEther(wei).split(".");
+    const dec =
+        parts.length > 1 ? parts[1].slice(0, 6).replace(/0+$/, "") || "0" : "0";
+    return parts[0] + "." + dec + " ETH";
+}
+
 async function estimateGas(txInfo) {
     try {
         const provider = getProvider(state.rpcUrl);
         const feeData = await provider.getFeeData();
-        const gasPrice = feeData.gasPrice;
         let gasLimit;
 
         if (txInfo.token === "ETH") {
@@ -246,21 +316,55 @@ async function estimateGas(txInfo) {
             });
         }
 
-        const gasCostWei = gasLimit * gasPrice;
-        const gasCostEth = formatEther(gasCostWei);
-        // Format to 6 significant decimal places
-        const parts = gasCostEth.split(".");
-        const dec =
-            parts.length > 1
-                ? parts[1].slice(0, 6).replace(/0+$/, "") || "0"
-                : "0";
-        const feeStr = parts[0] + "." + dec + " ETH";
+        // What the node will require to be reserved, which is what the gate
+        // must be: the send pins no fee fields, so it is broadcast as a
+        // type-2 transaction priced at maxFeePerGas.
+        const gasCostWei = feeReserveWei(gasLimit, feeData);
+        if (gasCostWei === null) {
+            throw new Error("no usable gas price from the provider");
+        }
+        // What the transaction is expected to cost, which is a different and
+        // usually much smaller number. Both are shown: quoting only the
+        // reserve overstates the typical cost by roughly double on mainnet,
+        // and quoting only the estimate contradicts the balance check.
+        const estimateWei = feeEstimateWei(gasLimit, feeData);
+        // The user may have left this transaction while the estimate was in
+        // flight; a stale fee must not reach the screen or the balance check.
+        if (pendingTx !== txInfo) return;
+
         const ethPrice = getPrice("ETH");
-        const feeUsd = ethPrice ? parseFloat(gasCostEth) * ethPrice : null;
-        $("confirm-fee-amount").textContent = valueWithUsd(feeStr, feeUsd);
+        const usd = (wei) =>
+            ethPrice ? parseFloat(formatEther(wei)) * ethPrice : null;
+
+        if (estimateWei !== null && estimateWei < gasCostWei) {
+            $("confirm-fee-amount").textContent = valueWithUsd(
+                "~" + formatFeeEth(estimateWei),
+                usd(estimateWei),
+            );
+            $("confirm-fee-reserve").textContent =
+                "up to " + formatFeeEth(gasCostWei) + " reserved";
+            setVisible("confirm-fee-reserve", true);
+        } else {
+            // No spread to report: either there is no estimate, or the node
+            // quotes a gas price at or above maxFeePerGas, so the expected
+            // cost is not below the reserve. Show the reserve alone.
+            $("confirm-fee-amount").textContent = valueWithUsd(
+                formatFeeEth(gasCostWei),
+                usd(gasCostWei),
+            );
+            setVisible("confirm-fee-reserve", false);
+        }
+        feeStatus = FEE_KNOWN;
+        feeWei = gasCostWei;
+        renderValidation(txInfo);
     } catch (e) {
         log.errorf("gas estimation failed:", e.message);
+        if (pendingTx !== txInfo) return;
         $("confirm-fee-amount").textContent = "Unable to estimate";
+        setVisible("confirm-fee-reserve", false);
+        feeStatus = FEE_UNAVAILABLE;
+        feeWei = null;
+        renderValidation(txInfo);
     }
 }
 

src/popup/views/deleteWallet.js

@@ -1,6 +1,10 @@
 const { $, showView, showFlash, goBack, clearViewStack } = require("./helpers");
 const { state, saveState } = require("../../shared/state");
 const { decryptWithPassword } = require("../../shared/vault");
+const {
+    removeWalletFromState,
+    broadcastActiveChanged,
+} = require("../../shared/walletDelete");
 
 let deleteWalletIndex = null;
 let ctx = null;
@@ -58,35 +62,24 @@ function init(_ctx) {
             return;
         }
 
-        // Collect addresses to clean up from allowedSites/deniedSites
-        const addresses = (wallet.addresses || []).map((a) => a.address);
-
-        // Remove wallet
-        state.wallets.splice(walletIdx, 1);
-
-        // Clean up site permissions for deleted addresses
-        for (const addr of addresses) {
-            delete state.allowedSites[addr];
-            delete state.deniedSites[addr];
-        }
+        // Remove the wallet and repair selection, permissions and hasWallet
+        const { activeAddressChanged } = removeWalletFromState(
+            state,
+            walletIdx,
+        );
 
         deleteWalletIndex = null;
 
-        if (state.wallets.length === 0) {
-            // No wallets left — reset selection and show welcome
-            state.selectedWallet = null;
-            state.selectedAddress = null;
-            state.activeAddress = null;
+        if (!state.hasWallet) {
             clearViewStack();
             await saveState();
+            // Save before broadcasting: the background reads the active
+            // address back out of storage to build accountsChanged.
+            if (activeAddressChanged) broadcastActiveChanged();
             showView("welcome");
         } else {
-            // Switch to first wallet if deleted wallet was active
-            state.selectedWallet = 0;
-            state.selectedAddress = 0;
-            state.activeAddress =
-                state.wallets[0].addresses[0]?.address || null;
             await saveState();
+            if (activeAddressChanged) broadcastActiveChanged();
             // Reset stack to [main] so Settings back goes home.
             // Use require() lazily to avoid circular dependency
             // (settings.js requires deleteWallet.js).

src/popup/views/helpers.js

@@ -1,6 +1,6 @@
 // Shared DOM helpers used by all views.
 
-const { DEBUG } = require("../../shared/constants");
+const { isDebug } = require("../../shared/log");
 const {
     formatUsd,
     getPrice,
@@ -31,8 +31,20 @@ const VIEWS = [
     "approve-tx",
     "approve-sign",
     "export-privkey",
+    "show-phrase",
 ];
 
+// Cleanup callbacks for views that hold a secret in the DOM. The view
+// registers one for itself and showView() runs it whenever that view is
+// navigated away from, so the secret is wiped no matter which control
+// caused the navigation — "Back", the settings gear, or a jump from
+// anywhere else. A per-button clear would only cover the one path.
+const viewLeaveHandlers = new Map();
+
+function onViewLeave(name, fn) {
+    viewLeaveHandlers.set(name, fn);
+}
+
 function $(id) {
     return document.getElementById(id);
 }
@@ -50,6 +62,11 @@ function hideError(id) {
 }
 
 function showView(name) {
+    const leaving = state.currentView;
+    if (leaving && leaving !== name) {
+        const onLeave = viewLeaveHandlers.get(leaving);
+        if (onLeave) onLeave();
+    }
     for (const v of VIEWS) {
         const el = document.getElementById(`view-${v}`);
         if (el) {
@@ -59,19 +76,37 @@ function showView(name) {
     clearFlash();
     state.currentView = name;
     saveState();
+    updateDebugBanner(name);
+}
+
+// Create or update the debug/insecure warning banner.
+// Called on every view switch and after the settings debug toggle changes.
+// The banner is shown when the compile-time DEBUG constant is true OR when
+// the user has enabled runtime debug mode via the settings easter egg, OR
+// when the active network is a testnet.
+function updateDebugBanner(viewName) {
+    const debug = isDebug();
     const net = currentNetwork();
-    if (DEBUG || net.isTestnet) {
-        const banner = document.getElementById("debug-banner");
-        if (banner) {
-            if (DEBUG && net.isTestnet) {
-                banner.textContent =
-                    "DEBUG / INSECURE [TESTNET] (" + name + ")";
+    const show = debug || net.isTestnet;
+    let banner = document.getElementById("debug-banner");
+    if (show) {
+        if (!banner) {
+            banner = document.createElement("div");
+            banner.id = "debug-banner";
+            banner.style.cssText =
+                "background:#c00;color:#fff;text-align:center;font-size:10px;padding:1px 0;font-family:monospace;position:sticky;top:0;z-index:9999;";
+            document.body.prepend(banner);
+        }
+        const suffix = viewName ? " (" + viewName + ")" : "";
+        if (debug && net.isTestnet) {
+            banner.textContent = "DEBUG / INSECURE [TESTNET]" + suffix;
         } else if (net.isTestnet) {
-                banner.textContent = "[TESTNET]";
+            banner.textContent = "[TESTNET]" + suffix;
         } else {
-                banner.textContent = "DEBUG / INSECURE (" + name + ")";
-            }
+            banner.textContent = "DEBUG / INSECURE" + suffix;
         }
+    } else if (banner) {
+        banner.remove();
     }
 }
 
@@ -413,10 +448,13 @@ function flashCopyFeedback(el) {
 }
 
 module.exports = {
+    VIEWS,
     $,
     showError,
     hideError,
     showView,
+    onViewLeave,
+    updateDebugBanner,
     setRenderMain,
     pushCurrentView,
     goBack,

src/popup/views/home.js

@@ -21,6 +21,10 @@ const {
     resetSendValidation,
 } = require("./send");
 const { deriveAddressFromXpub } = require("../../shared/wallet");
+const {
+    walletDefect,
+    walletDefectHtml,
+} = require("../../shared/walletDefects");
 const {
     formatUsd,
     getPrice,
@@ -163,6 +167,7 @@ async function loadHomeTxs(ctx) {
     if (allAddresses.length === 0) return;
 
     const filters = {
+        hideSpoofedSymbols: state.hideSpoofedSymbols,
         hideLowHolderTokens: state.hideLowHolderTokens,
         hideFraudContracts: state.hideFraudContracts,
         hideDustTransactions: state.hideDustTransactions,
@@ -213,25 +218,23 @@ async function loadHomeTxs(ctx) {
     }
 }
 
-function render(ctx) {
-    const container = $("wallet-list");
-    if (state.wallets.length === 0) {
-        container.innerHTML =
-            '<p class="text-muted py-2">No wallets yet. Add one to get started.</p>';
-        renderTotalValue();
-        renderActiveAddress();
-        return;
-    }
-
+// The wallet list markup. Pure: it reads state and returns a string, so the
+// list can be asserted on without a DOM.
+function walletListHtml() {
     let html = "";
     state.wallets.forEach((wallet, wi) => {
+        const defect = walletDefect(wallet);
         html += `<div>`;
         html += `<div class="flex justify-between items-center bg-section py-1 px-2" style="margin:0 -0.5rem">`;
         html += `<span class="font-bold cursor-pointer wallet-name underline decoration-dashed" data-wallet="${wi}">${wallet.name}</span>`;
-        if (wallet.type === "hd" || wallet.type === "xprv") {
+        // No "+" on a defective wallet: deriving another address from that
+        // xpub would only add one more address the key does not produce
+        // under the standard path.
+        if (!defect && (wallet.type === "hd" || wallet.type === "xprv")) {
             html += `<button class="btn-add-address border border-border px-1 hover:bg-fg hover:text-bg cursor-pointer text-xs" data-wallet="${wi}" title="Add another address to this wallet">+</button>`;
         }
         html += `</div>`;
+        html += walletDefectHtml(wallet);
 
         wallet.addresses.forEach((addr, ai) => {
             html += `<div class="address-row py-1 border-b border-border-light cursor-pointer hover:bg-hover" data-wallet="${wi}" data-address="${ai}">`;
@@ -259,7 +262,20 @@ function render(ctx) {
 
         html += `</div>`;
     });
-    container.innerHTML = html;
+    return html;
+}
+
+function render(ctx) {
+    const container = $("wallet-list");
+    if (state.wallets.length === 0) {
+        container.innerHTML =
+            '<p class="text-muted py-2">No wallets yet. Add one to get started.</p>';
+        renderTotalValue();
+        renderActiveAddress();
+        return;
+    }
+
+    container.innerHTML = walletListHtml();
 
     container.querySelectorAll(".address-row").forEach((row) => {
         row.addEventListener("click", async () => {
@@ -347,6 +363,13 @@ function render(ctx) {
     loadHomeTxs(ctx);
 }
 
+// The defect of the wallet the selected address belongs to, or null. Call
+// after selectActiveAddress().
+function selectedWalletDefect() {
+    if (state.selectedWallet === null) return null;
+    return walletDefect(state.wallets[state.selectedWallet]);
+}
+
 function selectActiveAddress() {
     for (let wi = 0; wi < state.wallets.length; wi++) {
         for (let ai = 0; ai < state.wallets[wi].addresses.length; ai++) {
@@ -370,6 +393,13 @@ function init(ctx) {
             showFlash("No active address selected.");
             return;
         }
+        // Before the balance check and before any password is asked for: this
+        // wallet cannot sign at all, so the send screen is a dead end.
+        const defect = selectedWalletDefect();
+        if (defect) {
+            showFlash(defect.shortMessage);
+            return;
+        }
         const addr = currentAddress();
         if (!addr.balance || parseFloat(addr.balance) === 0) {
             showFlash("Cannot send \u2014 zero balance.");
@@ -395,4 +425,4 @@ function init(ctx) {
     });
 }
 
-module.exports = { init, render };
+module.exports = { init, render, walletListHtml };

src/popup/views/send.js

@@ -13,6 +13,7 @@ const { state, currentAddress } = require("../../shared/state");
 let ctx;
 const { getProvider } = require("../../shared/balances");
 const { KNOWN_SYMBOLS, resolveSymbol } = require("../../shared/tokenList");
+const { isLowHolderCount } = require("../../shared/holders");
 const { getAddress } = require("ethers");
 
 const ZERO_ADDRESS = "0x0000000000000000000000000000000000000000";
@@ -132,7 +133,10 @@ function renderSendTokenSelect(addr) {
     for (const t of addr.tokenBalances || []) {
         if (isSpoofedToken(t)) continue;
         if (fraudSet.has(t.address.toLowerCase())) continue;
-        if (state.hideLowHolderTokens && (t.holders || 0) < 1000) continue;
+        // An unknown holder count does not withhold a token the user holds:
+        // only a count the explorer actually reported as below the threshold
+        // does.  Otherwise a missing field makes a real asset unspendable.
+        if (state.hideLowHolderTokens && isLowHolderCount(t.holders)) continue;
         const opt = document.createElement("option");
         opt.value = t.address;
         opt.textContent = t.symbol;

src/popup/views/settings.js

@@ -1,8 +1,10 @@
 const {
     $,
     showView,
+    updateDebugBanner,
     showFlash,
     escapeHtml,
+    flashCopyFeedback,
     goBack,
     pushCurrentView,
 } = require("./helpers");
@@ -10,12 +12,25 @@ const { applyTheme } = require("../theme");
 const { state, saveState, currentNetwork } = require("../../shared/state");
 const { NETWORKS, SUPPORTED_CHAIN_IDS } = require("../../shared/networks");
 const { onChainSwitch } = require("../../shared/chainSwitch");
-const { log, debugFetch } = require("../../shared/log");
+const { log, debugFetch, setRuntimeDebug } = require("../../shared/log");
 const deleteWallet = require("./deleteWallet");
+const showPhrase = require("./showPhrase");
+const { walletHasRecoveryPhrase } = require("../../shared/wallet");
+const {
+    BUILD_VERSION,
+    BUILD_LICENSE,
+    BUILD_AUTHOR,
+    BUILD_COMMIT,
+    BUILD_DATE,
+    GITEA_COMMIT_URL,
+} = require("../../shared/buildInfo");
 
 const runtime =
     typeof browser !== "undefined" ? browser.runtime : chrome.runtime;
 
+let versionClickCount = 0;
+let versionClickTimer = null;
+
 function renderSiteList(containerId, siteMap, stateKey) {
     const container = $(containerId);
     const hostnames = [...new Set(Object.values(siteMap).flat())];
@@ -86,7 +101,14 @@ function renderWalletListSettings() {
         const name = escapeHtml(wallet.name || "Wallet " + (idx + 1));
         html += `<div class="flex justify-between items-center text-xs py-1 border-b border-border-light">`;
         html += `<span class="settings-wallet-name cursor-pointer underline decoration-dashed" data-idx="${idx}">${name}</span>`;
+        html += `<span class="flex items-center gap-1 flex-shrink-0">`;
+        // Key and xprv wallets have no recovery phrase, so they are never
+        // offered the action at all.
+        if (walletHasRecoveryPhrase(wallet)) {
+            html += `<button class="btn-show-phrase border border-border px-1 hover:bg-fg hover:text-bg cursor-pointer" data-idx="${idx}" title="Show recovery phrase">[recovery phrase]</button>`;
+        }
         html += `<button class="btn-delete-wallet border border-border px-1 hover:bg-fg hover:text-bg cursor-pointer" data-idx="${idx}">[x]</button>`;
+        html += `</span>`;
         html += `</div>`;
     });
     container.innerHTML = html;
@@ -98,6 +120,15 @@ function renderWalletListSettings() {
         });
     });
 
+    container.querySelectorAll(".btn-show-phrase").forEach((btn) => {
+        btn.addEventListener("click", () => {
+            const idx = parseInt(btn.dataset.idx, 10);
+            // No pushCurrentView() here: showPhrase.show() refuses
+            // non-HD wallets and pushes only when it navigates.
+            showPhrase.show(idx);
+        });
+    });
+
     // Inline rename on click
     container.querySelectorAll(".settings-wallet-name").forEach((span) => {
         span.addEventListener("click", () => {
@@ -142,6 +173,28 @@ function show() {
     renderSiteLists();
     renderWalletListSettings();
 
+    // Populate About well
+    $("about-license").textContent = BUILD_LICENSE;
+    // Show only the name part of the author field (strip email)
+    const authorName = BUILD_AUTHOR.replace(/\s*<[^>]+>/, "");
+    $("about-author").textContent = authorName;
+    $("about-version").textContent = BUILD_VERSION;
+    $("about-release-date").textContent = BUILD_DATE;
+    $("about-commit-link").textContent = BUILD_COMMIT;
+    $("about-commit-link").href = GITEA_COMMIT_URL;
+
+    // Reset version click counter each time settings opens
+    versionClickCount = 0;
+
+    // Show debug well if debug mode is already enabled
+    const debugWell = $("settings-debug-well");
+    if (state.debugMode) {
+        debugWell.style.display = "";
+    } else {
+        debugWell.style.display = "none";
+    }
+    $("settings-debug-mode").checked = state.debugMode;
+
     showView("settings");
 }
 
@@ -156,6 +209,7 @@ function renderSiteLists() {
 
 function init(ctx) {
     deleteWallet.init(ctx);
+    showPhrase.init();
 
     $("btn-save-rpc").addEventListener("click", async () => {
         const url = $("settings-rpc").value.trim();
@@ -249,6 +303,12 @@ function init(ctx) {
         applyTheme(state.theme);
     });
 
+    $("settings-hide-spoofed-symbols").checked = state.hideSpoofedSymbols;
+    $("settings-hide-spoofed-symbols").addEventListener("change", async () => {
+        state.hideSpoofedSymbols = $("settings-hide-spoofed-symbols").checked;
+        await saveState();
+    });
+
     $("settings-hide-low-holders").checked = state.hideLowHolderTokens;
     $("settings-hide-low-holders").addEventListener("change", async () => {
         state.hideLowHolderTokens = $("settings-hide-low-holders").checked;
@@ -269,11 +329,17 @@ function init(ctx) {
 
     $("settings-dust-threshold").value = state.dustThresholdGwei;
     $("settings-dust-threshold").addEventListener("change", async () => {
-        const val = parseInt($("settings-dust-threshold").value, 10);
-        if (!isNaN(val) && val >= 0) {
+        const raw = $("settings-dust-threshold").value.trim();
+        const val = Number(raw);
+        // 0 is accepted and means "hide nothing".  Empty, negative,
+        // fractional and non-numeric input is rejected outright rather than
+        // coerced, and the field is put back to the stored threshold so it
+        // never shows a value the wallet is not using.
+        if (raw !== "" && Number.isInteger(val) && val >= 0) {
             state.dustThresholdGwei = val;
             await saveState();
         }
+        $("settings-dust-threshold").value = state.dustThresholdGwei;
     });
 
     $("settings-utc-timestamps").checked = state.utcTimestamps;
@@ -289,6 +355,66 @@ function init(ctx) {
         ctx.showSettingsAddTokenView,
     );
 
+    // Bright saturated colors for easter egg flashes (clicks 6–10)
+    const easterEggColors = [
+        "#ff0055", // hot pink
+        "#00cc44", // vivid green
+        "#3366ff", // electric blue
+        "#ff9900", // bright orange
+        "#aa00ff", // vivid purple
+    ];
+
+    // Easter egg: click version 10 times to reveal the debug well.
+    // Each click does a copy-flash animation. After 5 clicks, each
+    // additional click flashes a different bright saturated color.
+    $("about-version").addEventListener("click", () => {
+        versionClickCount++;
+        clearTimeout(versionClickTimer);
+        // Reset counter if user stops clicking for 3 seconds
+        versionClickTimer = setTimeout(() => {
+            versionClickCount = 0;
+        }, 3000);
+
+        const el = $("about-version");
+
+        if (versionClickCount > 5) {
+            // Colored flash for clicks 6–10
+            const colorIdx = versionClickCount - 6;
+            const color = easterEggColors[colorIdx % easterEggColors.length];
+            el.classList.remove("copy-flash-fade");
+            el.style.backgroundColor = color;
+            el.style.color = "#ffffff";
+            setTimeout(() => {
+                el.style.backgroundColor = "";
+                el.style.color = "";
+                el.classList.add("copy-flash-fade");
+                setTimeout(() => {
+                    el.classList.remove("copy-flash-fade");
+                }, 275);
+            }, 75);
+        } else {
+            // Standard copy-flash for clicks 1–5
+            flashCopyFeedback(el);
+        }
+
+        if (versionClickCount >= 10) {
+            versionClickCount = 0;
+            clearTimeout(versionClickTimer);
+            $("settings-debug-well").style.display = "";
+        }
+    });
+
+    // Debug mode toggle — update runtime flag, persist, and re-render banner
+    $("settings-debug-mode").addEventListener("change", async () => {
+        state.debugMode = $("settings-debug-mode").checked;
+        setRuntimeDebug(state.debugMode);
+        await saveState();
+        updateDebugBanner(state.currentView);
+    });
+
+    // Sync runtime debug flag on init
+    setRuntimeDebug(state.debugMode);
+
     $("btn-settings-back").addEventListener("click", () => {
         goBack();
     });

src/popup/views/showPhrase.js

@@ -0,0 +1,154 @@
+// Recovery phrase display for HD wallets.
+//
+// The phrase is the secret that owns every address in the wallet, so it is
+// handled under four rules:
+//
+//   1. Only an HD wallet reaches this screen (walletHasRecoveryPhrase).
+//   2. Nothing is decrypted, and nothing is written into the DOM, until
+//      decryptWithPassword has accepted the password.
+//   3. Leaving the screen by any path wipes it, via the onViewLeave hook,
+//      and a decrypt still in flight when that happens is discarded
+//      instead of written (revealGeneration).
+//   4. The phrase never reaches the logger. This module deliberately does
+//      not import src/shared/log.js, and the failed-decrypt path reports a
+//      fixed sentence rather than the caught error.
+//
+// The phrase is also never assigned to `state`, so it cannot be persisted
+// to extension storage, and "show-phrase" is excluded from RESTORABLE_VIEWS
+// so the popup can never reopen onto it.
+
+const {
+    $,
+    showView,
+    showFlash,
+    flashCopyFeedback,
+    goBack,
+    onViewLeave,
+    pushCurrentView,
+} = require("./helpers");
+const { state } = require("../../shared/state");
+const { decryptWithPassword } = require("../../shared/vault");
+const { walletHasRecoveryPhrase } = require("../../shared/wallet");
+
+const VIEW = "show-phrase";
+
+let walletIndex = null;
+
+// Bumped by every clear(), which is what leaving the screen runs. reveal()
+// captures it before awaiting the decrypt and refuses to touch the DOM if
+// it has moved: a decrypt still in flight when the screen is left would
+// otherwise write the phrase *after* the wipe, with nothing scheduled to
+// wipe it again, leaving it in the hidden view for the life of the popup.
+let revealGeneration = 0;
+
+// True only if the reveal that captured `generation` is still the live one:
+// the screen has not been left, cleared, or re-entered for another wallet
+// since it started.
+function isCurrentReveal(generation) {
+    return (
+        generation === revealGeneration &&
+        walletIndex !== null &&
+        state.currentView === VIEW
+    );
+}
+
+function fail(message) {
+    $("show-phrase-flash").textContent = message;
+    $("show-phrase-flash").style.visibility = "visible";
+}
+
+// Wipe every trace of the phrase and drop the wallet selection. Safe to
+// call when nothing was ever revealed, and safe to call twice.
+function clear() {
+    walletIndex = null;
+    revealGeneration += 1;
+    $("show-phrase-value").textContent = "";
+    $("show-phrase-password").value = "";
+    $("show-phrase-result").classList.add("hidden");
+    $("show-phrase-password-section").classList.remove("hidden");
+    $("show-phrase-flash").textContent = "";
+    $("show-phrase-flash").style.visibility = "hidden";
+}
+
+function show(walletIdx) {
+    const wallet = state.wallets[walletIdx];
+    if (!walletHasRecoveryPhrase(wallet)) {
+        showFlash("This wallet does not have a recovery phrase.");
+        return;
+    }
+    clear();
+    walletIndex = walletIdx;
+    $("show-phrase-wallet-name").textContent =
+        wallet.name || "Wallet " + (walletIdx + 1);
+    // Pushed here rather than by the caller: this function can return
+    // without navigating, and a push that happened anyway would leave an
+    // entry on the stack that no screen transition matches.
+    pushCurrentView();
+    showView(VIEW);
+}
+
+async function reveal() {
+    const password = $("show-phrase-password").value;
+    if (!password) {
+        fail("Please enter your password.");
+        return;
+    }
+    if (walletIndex === null) {
+        fail("No wallet is selected.");
+        return;
+    }
+    const wallet = state.wallets[walletIndex];
+    if (!walletHasRecoveryPhrase(wallet)) {
+        fail("This wallet does not have a recovery phrase.");
+        return;
+    }
+
+    const btn = $("btn-show-phrase-reveal");
+    btn.disabled = true;
+    btn.classList.add("text-muted");
+    const generation = revealGeneration;
+    try {
+        const phrase = await decryptWithPassword(
+            wallet.encryptedSecret,
+            password,
+        );
+        // The only suspension point in this view, and the only place a
+        // secret is written: if the screen was left while the decrypt ran,
+        // the wipe has already happened and this write must not land.
+        if (!isCurrentReveal(generation)) return;
+        $("show-phrase-password").value = "";
+        $("show-phrase-password-section").classList.add("hidden");
+        $("show-phrase-value").textContent = phrase;
+        $("show-phrase-result").classList.remove("hidden");
+        $("show-phrase-flash").textContent = "";
+        $("show-phrase-flash").style.visibility = "hidden";
+    } catch {
+        if (!isCurrentReveal(generation)) return;
+        // Deliberately not the caught error: the message is fixed so that
+        // nothing derived from the ciphertext or the attempt can surface.
+        fail("That password is not correct. Please try again.");
+    } finally {
+        btn.disabled = false;
+        btn.classList.remove("text-muted");
+    }
+}
+
+function init() {
+    onViewLeave(VIEW, clear);
+
+    $("btn-show-phrase-back").addEventListener("click", () => {
+        goBack();
+    });
+
+    $("btn-show-phrase-reveal").addEventListener("click", reveal);
+
+    $("show-phrase-value").addEventListener("click", () => {
+        const phrase = $("show-phrase-value").textContent;
+        if (!phrase) return;
+        navigator.clipboard.writeText(phrase);
+        showFlash("Copied!");
+        flashCopyFeedback($("show-phrase-value"));
+    });
+}
+
+module.exports = { init, show };

src/popup/views/transactionDetail.js

@@ -7,6 +7,7 @@ const {
     showFlash,
     flashCopyFeedback,
     addressTitle,
+    addressDotHtml,
     escapeHtml,
     isoDate,
     timeAgo,

src/shared/alarms.js

@@ -0,0 +1,114 @@
+// Periodic scheduling for the background context.
+//
+// The Chrome MV3 service worker is terminated after roughly 30 seconds idle,
+// which takes every setInterval/setTimeout with it. The extension alarms API
+// is the mechanism that survives: the browser holds the schedule and wakes
+// the worker to deliver onAlarm. Firefox MV2 runs a persistent background
+// page where timers would survive, but alarms behave identically there, so
+// both targets share this path and both manifests declare the "alarms"
+// permission.
+//
+// Periods are whole minutes at or above the browser-enforced one-minute
+// minimum, so nothing here is silently clamped to a slower cadence.
+//
+// Trap for anyone changing a period: each job also carries a freshness guard
+// that can veto its own scheduled tick. A guard timed to the alarm period
+// halves the real cadence, because the guard is measured from when the last
+// run finished and the alarm fires one run-duration earlier than that. Every
+// guard must therefore either be strictly shorter than the period it gates or
+// be bypassed on the scheduled tick — see backgroundRefresh() in
+// src/background/index.js and updatePhishingList() in shared/phishingDomains.js.
+
+const BALANCE_REFRESH_ALARM = "autistmask-balance-refresh";
+const PHISHING_REFRESH_ALARM = "autistmask-phishing-refresh";
+
+const MIN_ALARM_PERIOD_MINUTES = 1;
+const BALANCE_REFRESH_PERIOD_MINUTES = 1;
+const PHISHING_REFRESH_PERIOD_MINUTES = 24 * 60;
+
+// Resolved on use rather than captured at module load: the worker is torn
+// down and re-evaluated repeatedly, and tests install a stub after requiring
+// the module.
+function alarmsApi() {
+    if (typeof browser !== "undefined" && browser.alarms) return browser.alarms;
+    if (typeof chrome !== "undefined" && chrome.alarms) return chrome.alarms;
+    return null;
+}
+
+/**
+ * Create an alarm unless one with the requested period already exists.
+ *
+ * The existence check is load-bearing: creating an alarm resets its schedule,
+ * and this runs on every worker wake. Creating unconditionally would push the
+ * next fire time out on every incoming message, so a busy extension would
+ * never see the alarm fire at all.
+ *
+ * The period comparison is equally load-bearing in the other direction: an
+ * alarm created by an older version keeps its old period forever unless a
+ * changed constant re-creates it, so a period edit would never reach an
+ * existing install. Re-creating on a period change happens once and then
+ * settles into the existence check above.
+ *
+ * @param {string} name
+ * @param {number} periodInMinutes
+ * @returns {Promise<boolean>} true if the alarm was created by this call.
+ */
+async function ensureAlarm(name, periodInMinutes) {
+    const api = alarmsApi();
+    if (!api) return false;
+    const period = Math.max(periodInMinutes, MIN_ALARM_PERIOD_MINUTES);
+    const existing = await api.get(name);
+    if (existing && existing.periodInMinutes === period) return false;
+    api.create(name, {
+        periodInMinutes: period,
+        delayInMinutes: period,
+    });
+    return true;
+}
+
+/**
+ * Ensure both recurring background jobs are scheduled. Safe to call on every
+ * worker start, on onInstalled and on onStartup.
+ *
+ * @returns {Promise<{balance: boolean, phishing: boolean}>} which alarms this
+ * call had to create.
+ */
+async function ensureRecurringAlarms() {
+    const balance = await ensureAlarm(
+        BALANCE_REFRESH_ALARM,
+        BALANCE_REFRESH_PERIOD_MINUTES,
+    );
+    const phishing = await ensureAlarm(
+        PHISHING_REFRESH_ALARM,
+        PHISHING_REFRESH_PERIOD_MINUTES,
+    );
+    return { balance, phishing };
+}
+
+/**
+ * Register per-alarm handlers. One listener dispatches by alarm name so the
+ * worker only ever installs a single onAlarm listener.
+ *
+ * @param {Object<string, function>} handlers
+ * @returns {boolean} true if the listener was installed.
+ */
+function registerAlarmHandlers(handlers) {
+    const api = alarmsApi();
+    if (!api || !api.onAlarm) return false;
+    api.onAlarm.addListener((alarm) => {
+        const handler = handlers[alarm && alarm.name];
+        if (handler) handler();
+    });
+    return true;
+}
+
+module.exports = {
+    BALANCE_REFRESH_ALARM,
+    PHISHING_REFRESH_ALARM,
+    MIN_ALARM_PERIOD_MINUTES,
+    BALANCE_REFRESH_PERIOD_MINUTES,
+    PHISHING_REFRESH_PERIOD_MINUTES,
+    ensureAlarm,
+    ensureRecurringAlarms,
+    registerAlarmHandlers,
+};

src/shared/approvalVerify.js

@@ -0,0 +1,124 @@
+// Verification of the signed artifacts produced by the approval popup.
+//
+// Signing happens in the popup, where the password is entered; the background
+// only broadcasts the raw transaction and resolves the pending approval back
+// to the requesting page. So that moving the signing out of the background
+// does not turn the background into a blind relay, the background re-derives
+// the signer from the artifact and checks it against the approval it is
+// holding before acting on it. All recovery is delegated to ethers.
+//
+// Every failure message is a full sentence, because these strings are shown to
+// the user and returned to the dApp.
+
+const {
+    Transaction,
+    getAddress,
+    getBytes,
+    verifyMessage,
+    verifyTypedData,
+} = require("ethers");
+
+// Case-insensitive address comparison that tolerates absent values on either
+// side. Two absent addresses compare equal (contract creation has no `to`).
+function sameAddress(a, b) {
+    const aMissing = a === null || a === undefined || a === "";
+    const bMissing = b === null || b === undefined || b === "";
+    if (aMissing || bMissing) return aMissing && bMissing;
+    try {
+        return getAddress(a) === getAddress(b);
+    } catch {
+        return String(a).toLowerCase() === String(b).toLowerCase();
+    }
+}
+
+// Normalize a transaction value (hex string, decimal string, number or
+// bigint) to a bigint. An absent value is zero, matching ethers.
+function normalizeValue(v) {
+    if (v === null || v === undefined || v === "") return 0n;
+    return BigInt(v);
+}
+
+// Normalize call data to a lowercase hex string. Absent data is "0x".
+function normalizeData(v) {
+    if (v === null || v === undefined || v === "" || v === "0x") return "0x";
+    return String(v).toLowerCase();
+}
+
+// Assert that a raw signed transaction is the transaction the user approved,
+// signed by the address the approval was raised for. Returns the parsed
+// ethers Transaction on success, throws otherwise.
+function verifySignedTx(rawSignedTx, txParams, expectedFrom) {
+    if (typeof rawSignedTx !== "string" || !rawSignedTx.startsWith("0x")) {
+        throw new Error("The signed transaction is missing or malformed.");
+    }
+
+    let parsed;
+    try {
+        parsed = Transaction.from(rawSignedTx);
+    } catch {
+        throw new Error("The signed transaction could not be decoded.");
+    }
+
+    if (!parsed.from) {
+        throw new Error("The signed transaction carries no valid signature.");
+    }
+    if (!sameAddress(parsed.from, expectedFrom)) {
+        throw new Error(
+            "The signed transaction was signed by a different address than the one that was approved.",
+        );
+    }
+    if (!sameAddress(parsed.to, txParams.to)) {
+        throw new Error(
+            "The signed transaction does not go to the approved recipient.",
+        );
+    }
+    if (normalizeValue(parsed.value) !== normalizeValue(txParams.value)) {
+        throw new Error(
+            "The signed transaction does not carry the approved value.",
+        );
+    }
+    if (normalizeData(parsed.data) !== normalizeData(txParams.data)) {
+        throw new Error(
+            "The signed transaction does not carry the approved call data.",
+        );
+    }
+
+    return parsed;
+}
+
+// Assert that a signature over the approved message or typed data was
+// produced by the address the approval was raised for. Returns the recovered
+// address on success, throws otherwise.
+function verifySignature(signParams, signature, expectedFrom) {
+    if (typeof signature !== "string" || !signature.startsWith("0x")) {
+        throw new Error("The signature is missing or malformed.");
+    }
+
+    let recovered;
+    try {
+        if (
+            signParams.method === "personal_sign" ||
+            signParams.method === "eth_sign"
+        ) {
+            recovered = verifyMessage(getBytes(signParams.message), signature);
+        } else {
+            const typedData = JSON.parse(signParams.typedData);
+            const { domain, types, message } = typedData;
+            // ethers derives EIP712Domain itself and rejects it as an input.
+            delete types.EIP712Domain;
+            recovered = verifyTypedData(domain, types, message, signature);
+        }
+    } catch {
+        throw new Error("The signature could not be verified.");
+    }
+
+    if (!sameAddress(recovered, expectedFrom)) {
+        throw new Error(
+            "The signature was produced by a different address than the one that was approved.",
+        );
+    }
+
+    return recovered;
+}
+
+module.exports = { verifySignedTx, verifySignature, sameAddress };

src/shared/balances.js

@@ -12,6 +12,7 @@ const { ERC20_ABI } = require("./constants");
 const { log, debugFetch } = require("./log");
 const { deriveAddressFromXpub } = require("./wallet");
 const { KNOWN_SYMBOLS, TOKEN_BY_ADDRESS } = require("./tokenList");
+const { LOW_HOLDER_THRESHOLD, parseHoldersCount } = require("./holders");
 
 // Use a static network to skip auto-detection (which can fail and cause
 // "could not coalesce error" on some RPC endpoints like Cloudflare).
@@ -70,10 +71,20 @@ async function fetchTokenBalances(address, blockscoutUrl, trackedTokens) {
             if (bal === "0.0") continue;
 
             const tokenAddr = (item.token.address_hash || "").toLowerCase();
-            const holders = parseInt(item.token.holders_count || "0", 10);
+            // null means the explorer reported no count, which is not the
+            // same as a count of zero.  This gate is not the low-holder
+            // display filter: it has no user-facing off switch and governs
+            // the whole balance list, so it stays strict and admits a token
+            // only on a reported count — an unreported one is no evidence.
+            // A legitimate token still reaches the list through the known
+            // token list or by the user tracking it, and the null is carried
+            // through to the views, where the two low-holder filters treat
+            // an unknown count as "do not judge" rather than as zero.
+            const holders = parseHoldersCount(item.token.holders_count);
             const isKnown = TOKEN_BY_ADDRESS.has(tokenAddr);
             const isTracked = trackedSet.has(tokenAddr);
-            const hasEnoughHolders = holders >= 1000;
+            const hasEnoughHolders =
+                holders !== null && holders >= LOW_HOLDER_THRESHOLD;
 
             // Skip spam tokens the user never asked to see
             if (!isKnown && !isTracked && !hasEnoughHolders) continue;
@@ -278,6 +289,7 @@ async function scanForAddresses(xpub, rpcUrl, gapLimit = 5) {
 }
 
 module.exports = {
+    fetchTokenBalances,
     refreshBalances,
     lookupTokenInfo,
     getProvider,

src/shared/buildInfo.js

@@ -0,0 +1,35 @@
+// Build-time constants injected by esbuild define in build.js.
+// These globals are replaced at bundle time with string literals.
+
+/* global __BUILD_VERSION__, __BUILD_LICENSE__, __BUILD_AUTHOR__,
+          __BUILD_COMMIT__, __BUILD_COMMIT_FULL__, __BUILD_DATE__ */
+
+const BUILD_VERSION =
+    typeof __BUILD_VERSION__ !== "undefined" ? __BUILD_VERSION__ : "dev";
+const BUILD_LICENSE =
+    typeof __BUILD_LICENSE__ !== "undefined" ? __BUILD_LICENSE__ : "GPL-3.0";
+const BUILD_AUTHOR =
+    typeof __BUILD_AUTHOR__ !== "undefined"
+        ? __BUILD_AUTHOR__
+        : "sneak <sneak@sneak.berlin>";
+const BUILD_COMMIT =
+    typeof __BUILD_COMMIT__ !== "undefined" ? __BUILD_COMMIT__ : "unknown";
+const BUILD_COMMIT_FULL =
+    typeof __BUILD_COMMIT_FULL__ !== "undefined"
+        ? __BUILD_COMMIT_FULL__
+        : "unknown";
+const BUILD_DATE =
+    typeof __BUILD_DATE__ !== "undefined" ? __BUILD_DATE__ : "unknown";
+
+const GITEA_COMMIT_URL =
+    "https://git.eeqj.de/sneak/AutistMask/commit/" + BUILD_COMMIT_FULL;
+
+module.exports = {
+    BUILD_VERSION,
+    BUILD_LICENSE,
+    BUILD_AUTHOR,
+    BUILD_COMMIT,
+    BUILD_COMMIT_FULL,
+    BUILD_DATE,
+    GITEA_COMMIT_URL,
+};

src/shared/constants.js

@@ -1,4 +1,27 @@
-const DEBUG = true;
+// DEBUG is a build-time constant injected by esbuild's define in build.js
+// (see src/shared/buildInfo.js for the same pattern). It is false unless the
+// bundle was produced with AUTISTMASK_DEBUG=1, and it is false whenever the
+// module is loaded outside a bundle (tests, plain require). It must never be
+// derived from anything the user can change at runtime: it is what gates the
+// hardcoded test mnemonic below.
+/* global __BUILD_DEBUG__ */
+const DEBUG = typeof __BUILD_DEBUG__ !== "undefined" ? __BUILD_DEBUG__ : false;
+
+// Machine-readable record of the compiled DEBUG state, read out of the emitted
+// bundles by script/verify-build. It is derived from DEBUG itself so the two
+// cannot disagree, and it is a plain string literal rather than a minifier
+// artifact like `DEBUG:!1`, so the check does not depend on esbuild's output
+// staying byte-stable across versions.
+//
+// The ambiguity is the point. When DEBUG is known at build time the bundler
+// folds this to exactly one of the two literals. When it is not — which is
+// exactly what happens if the __BUILD_DEBUG__ define goes missing from
+// build.js — the ternary survives, both literals appear in the bundle, and
+// verify-build fails rather than guessing.
+const BUILD_DEBUG_MARKER = DEBUG
+    ? "autistmask-build-debug=on"
+    : "autistmask-build-debug=off";
+
 const DEBUG_MNEMONIC =
     "cube evolve unfold result inch risk jealous skill hotel bulb night wreck";
 
@@ -36,6 +59,7 @@ function isBurnAddress(address) {
 
 module.exports = {
     DEBUG,
+    BUILD_DEBUG_MARKER,
     DEBUG_MNEMONIC,
     ETHEREUM_MAINNET_CHAIN_ID,
     ETHEREUM_SEPOLIA_CHAIN_ID,

src/shared/ens.js

@@ -1,6 +1,11 @@
 // Cached ENS reverse resolution.
 // Resolves addresses to ENS names via ethers provider.lookupAddress(),
 // caching results in localStorage with a 12-hour TTL.
+//
+// POPUP ONLY. localStorage does not exist in the Chrome MV3 service worker,
+// so this module must not be pulled into src/background/. Anything the
+// background context needs to cache goes in extension storage instead (see
+// shared/phishingDomains.js).
 
 const { getProvider } = require("./balances");
 const { log } = require("./log");

src/shared/holders.js

@@ -0,0 +1,32 @@
+// Holder counts, and the one rule that decides whether a count is "low".
+//
+// The block explorer's holders_count is optional: it is absent on a token it
+// has only just indexed, and it goes missing on a degraded or changed API.
+// Absent means the count is unknown.  It does not mean the token has no
+// holders, and collapsing the two hides a token the user really holds as if
+// it were spam.  Every call site reads the count through here so the
+// distinction cannot be lost again in one place while holding in the others.
+
+const LOW_HOLDER_THRESHOLD = 1000;
+
+// Parse an explorer-supplied holders_count into a number, or null when the
+// explorer did not report one.  Anything unparseable is unknown too: a count
+// we cannot read is not a count of zero.
+function parseHoldersCount(raw) {
+    if (raw === null || raw === undefined || raw === "") return null;
+    const n = parseInt(raw, 10);
+    return Number.isFinite(n) ? n : null;
+}
+
+// True only for a token the explorer reported as having fewer holders than
+// the threshold.  An unknown count is never low: showing a spam token the
+// user can see is unusual costs less than hiding an asset they own.
+function isLowHolderCount(holders) {
+    return holders != null && holders < LOW_HOLDER_THRESHOLD;
+}
+
+module.exports = {
+    LOW_HOLDER_THRESHOLD,
+    parseHoldersCount,
+    isLowHolderCount,
+};

src/shared/log.js

@@ -1,12 +1,27 @@
 // Leveled logger. Outputs to console with [AutistMask] prefix.
-// Level is DEBUG when the DEBUG constant is true, INFO otherwise.
+// Level is DEBUG when the compile-time DEBUG constant is true or the runtime
+// debugMode state flag is enabled.  The runtime flag is checked lazily so it
+// responds immediately when toggled in settings.
 
 const { DEBUG } = require("./constants");
 
 const LEVELS = { debug: 0, info: 1, warn: 2, error: 3 };
-const threshold = DEBUG ? LEVELS.debug : LEVELS.info;
+
+// Runtime debug mode flag — set by settings.js when the user toggles debug
+// mode via the easter egg.  Kept here as a simple mutable reference so it can
+// be updated without circular dependency issues with state.js.
+let _runtimeDebug = false;
+
+function setRuntimeDebug(enabled) {
+    _runtimeDebug = enabled;
+}
+
+function isDebug() {
+    return DEBUG || _runtimeDebug;
+}
 
 function emit(level, method, args) {
+    const threshold = isDebug() ? LEVELS.debug : LEVELS.info;
     if (LEVELS[level] >= threshold) {
         console[method]("[AutistMask]", ...args);
     }
@@ -37,4 +52,4 @@ async function debugFetch(url, opts) {
     return resp;
 }
 
-module.exports = { log, debugFetch };
+module.exports = { log, debugFetch, setRuntimeDebug, isDebug };

src/shared/phishingDomains.js

@@ -8,8 +8,14 @@
 // The domain-checker checks the in-memory delta first (fresh/recent scam
 // sites), then falls back to the vendored list.
 //
-// If the delta is under 256 KiB it is persisted to localStorage so it
-// survives extension/service-worker restarts.
+// If the delta and its fetch timestamp fit in 256 KiB they are persisted to
+// extension storage, so they survive termination of the MV3 service worker.
+// Extension storage, not localStorage: localStorage does not exist in a
+// service worker, so the previous persistence never ran on Chrome at all.
+// The stored timestamps are what keep a restarted worker from re-fetching on
+// every wake while still noticing an overdue update. Those guards apply to the
+// startup path only; the 24-hour alarm tick bypasses them, or it would veto
+// its own refresh — see updatePhishingList().
 
 const vendoredConfig = require("./phishingBlocklist.json");
 
@@ -17,7 +23,14 @@ const BLOCKLIST_URL =
     "https://raw.githubusercontent.com/MetaMask/eth-phishing-detect/main/src/config.json";
 
 const CACHE_TTL_MS = 24 * 60 * 60 * 1000; // 24 hours
-const REFRESH_INTERVAL_MS = 24 * 60 * 60 * 1000; // 24 hours
+
+// Floor on how often an unscheduled path may hit the network. The worker is
+// revived every ~30 seconds while the browser is busy, and every revival runs
+// the startup path; without a persisted record of the last attempt, any state
+// that leaves lastFetchTime unset — a fetch that failed, or a delta too large
+// to store — would download the full list on every single wake.
+const MIN_FETCH_ATTEMPT_INTERVAL_MS = 60 * 60 * 1000; // 1 hour
+
 const DELTA_STORAGE_KEY = "phishing-delta";
 const MAX_DELTA_BYTES = 256 * 1024; // 256 KiB
 
@@ -29,45 +42,104 @@ const vendoredBlacklist = new Set(
 // Delta set — only entries from live list that are NOT in vendored.
 let deltaBlacklist = new Set();
 let lastFetchTime = 0;
+let lastAttemptTime = 0;
 let fetchPromise = null;
-let refreshTimer = null;
+let loadPromise = null;
+
+// Resolved on use rather than captured at module load, so a test can install
+// a stub after requiring the module and so the popup — which has no reason to
+// touch the delta — does not fail to load where the API is absent.
+function storageApi() {
+    if (typeof browser !== "undefined" && browser.storage) {
+        return browser.storage.local;
+    }
+    if (typeof chrome !== "undefined" && chrome.storage) {
+        return chrome.storage.local;
+    }
+    return null;
+}
 
 /**
- * Load delta entries from localStorage on startup.
- * Called once during module initialization in the background script.
+ * Sanitise a timestamp read back from storage.
+ *
+ * A value in the future is permanent poison: every guard here measures elapsed
+ * time as `Date.now() - stamp` and tests only the lower bound, so a stamp a
+ * year ahead suppresses updates for a year with no path that ever clears it.
+ * Clock skew and a restored profile backup both produce one. Since these
+ * timestamps only ever gate work, discarding an impossible one is safe: it
+ * costs at most a single extra fetch and restores a sane value immediately.
+ *
+ * @param {unknown} value
+ * @returns {number} the timestamp, or 0 if it is unusable.
  */
-function loadDeltaFromStorage() {
+function sanitizeTimestamp(value) {
+    if (typeof value !== "number" || !Number.isFinite(value)) return 0;
+    if (value <= 0 || value > Date.now()) return 0;
+    return value;
+}
+
+/**
+ * Load the persisted delta and its timestamps from extension storage.
+ * Runs once per worker lifetime; every entry point funnels through
+ * ensureDeltaLoaded() so a wake from termination restores state exactly once.
+ *
+ * @returns {Promise<void>}
+ */
+async function loadDeltaFromStorage() {
+    const storage = storageApi();
+    if (!storage) return;
     try {
-        const raw = localStorage.getItem(DELTA_STORAGE_KEY);
-        if (!raw) return;
-        const data = JSON.parse(raw);
-        if (data.blacklist && Array.isArray(data.blacklist)) {
+        const result = await storage.get(DELTA_STORAGE_KEY);
+        const data = result && result[DELTA_STORAGE_KEY];
+        if (!data) return;
+        if (Array.isArray(data.blacklist)) {
             deltaBlacklist = new Set(
                 data.blacklist.map((d) => d.toLowerCase()),
             );
         }
+        lastFetchTime = sanitizeTimestamp(data.lastFetchTime);
+        lastAttemptTime = sanitizeTimestamp(data.lastAttemptTime);
     } catch {
-        // localStorage unavailable or corrupt — start empty
+        // Storage unavailable or corrupt — start empty and re-fetch.
     }
 }
 
+function ensureDeltaLoaded() {
+    if (!loadPromise) loadPromise = loadDeltaFromStorage();
+    return loadPromise;
+}
+
 /**
- * Persist delta to localStorage if it fits within MAX_DELTA_BYTES.
+ * Persist the delta and its timestamps if they fit within MAX_DELTA_BYTES.
+ *
+ * The 256 KiB cap covers the delta and its freshness claim: when the delta is
+ * too large to keep, lastFetchTime goes with it, so the next start re-fetches
+ * rather than trusting a freshness claim for a delta it no longer holds.
+ * lastAttemptTime is written either way — it records that the network was
+ * contacted, which stays true whatever became of the response, and it is what
+ * stops a permanently oversized list from downloading on every worker wake.
+ *
+ * @returns {Promise<void>}
  */
-function saveDeltaToStorage() {
+async function saveDeltaToStorage() {
+    const storage = storageApi();
+    if (!storage) return;
     try {
         const data = {
             blacklist: Array.from(deltaBlacklist),
+            lastFetchTime,
+            lastAttemptTime,
         };
         const json = JSON.stringify(data);
         if (json.length < MAX_DELTA_BYTES) {
-            localStorage.setItem(DELTA_STORAGE_KEY, json);
+            await storage.set({ [DELTA_STORAGE_KEY]: data });
+        } else if (lastAttemptTime > 0) {
+            await storage.set({ [DELTA_STORAGE_KEY]: { lastAttemptTime } });
         } else {
-            // Too large — remove stale key if present
-            localStorage.removeItem(DELTA_STORAGE_KEY);
+            await storage.remove(DELTA_STORAGE_KEY);
         }
     } catch {
-        // localStorage unavailable — skip silently
+        // Storage unavailable — skip silently
     }
 }
 
@@ -76,6 +148,7 @@ function saveDeltaToStorage() {
  * Used for both live fetches and testing.
  *
  * @param {{ blacklist?: string[] }} config
+ * @returns {Promise<void>} resolves once the delta has been persisted.
  */
 function loadConfig(config) {
     const liveBlacklist = (config.blacklist || []).map((d) => d.toLowerCase());
@@ -86,7 +159,7 @@ function loadConfig(config) {
     );
 
     lastFetchTime = Date.now();
-    saveDeltaToStorage();
+    return saveDeltaToStorage();
 }
 
 /**
@@ -111,6 +184,11 @@ function hostnameVariants(hostname) {
  * Check if a hostname is on the phishing blocklist.
  * Checks delta first (fresh/recent scam sites), then vendored list.
  *
+ * Synchronous by design — callers answer an approval prompt with it. On a
+ * worker that has just woken, the persisted delta may still be loading; the
+ * vendored list, which is bundled and always present, carries the check until
+ * it lands.
+ *
  * @param {string} hostname - The hostname to check.
  * @returns {boolean}
  */
@@ -127,28 +205,59 @@ function isPhishingDomain(hostname) {
 
 /**
  * Fetch the latest blocklist and compute delta against vendored data.
- * De-duplicates concurrent fetches. Results are cached for CACHE_TTL_MS.
+ * De-duplicates concurrent fetches. Results are cached for CACHE_TTL_MS,
+ * counted from the persisted timestamp so the cache outlives the worker.
  *
+ * `force` is what makes the 24-hour alarm actually refresh every 24 hours.
+ * The alarm fires one period after the previous alarm, but lastFetchTime is
+ * stamped when that fetch *completed*, so an unforced tick lands one fetch
+ * latency inside its own TTL, skips, and turns the real cadence into 48 hours.
+ * Shortening the TTL instead would not fix it: the worker wakes every ~30
+ * seconds and the startup path re-checks the TTL each time, so a shortened TTL
+ * simply becomes the real cadence. The TTL is there to stop redundant fetches
+ * on wake, and the scheduled tick is not redundant, so it bypasses it.
+ *
+ * @param {{force?: boolean}} [opts] force: fetch unless one is already in
+ * flight, ignoring both the freshness and the retry guard. For the scheduled
+ * alarm tick only.
  * @returns {Promise<void>}
  */
-async function updatePhishingList() {
-    // Skip if recently fetched
-    if (Date.now() - lastFetchTime < CACHE_TTL_MS && lastFetchTime > 0) {
+async function updatePhishingList({ force = false } = {}) {
+    // A worker that has just been revived knows nothing until the persisted
+    // record is back in memory; without this the freshness check below would
+    // always see 0 and re-fetch on every wake.
+    await ensureDeltaLoaded();
+
+    if (!force) {
+        const now = Date.now();
+        // Skip if recently fetched.
+        if (lastFetchTime > 0 && now - lastFetchTime < CACHE_TTL_MS) return;
+        // Skip if the network was contacted recently and the result was not
+        // usable — a failed fetch or an oversized delta leaves lastFetchTime
+        // unset, and without this every wake would retry.
+        if (
+            lastAttemptTime > 0 &&
+            now - lastAttemptTime < MIN_FETCH_ATTEMPT_INTERVAL_MS
+        ) {
             return;
         }
+    }
 
     // De-duplicate concurrent calls
     if (fetchPromise) return fetchPromise;
 
     fetchPromise = (async () => {
+        lastAttemptTime = Date.now();
         try {
             const resp = await fetch(BLOCKLIST_URL);
             if (!resp.ok) throw new Error("HTTP " + resp.status);
             const config = await resp.json();
-            loadConfig(config);
+            await loadConfig(config);
         } catch {
-            // Silently fail — vendored list still provides coverage.
-            // We'll retry next time.
+            // Silently fail — vendored list still provides coverage. Persist
+            // the attempt so a persistently failing fetch is retried on the
+            // schedule rather than on every wake.
+            await saveDeltaToStorage();
         } finally {
             fetchPromise = null;
         }
@@ -158,12 +267,29 @@ async function updatePhishingList() {
 }
 
 /**
- * Start periodic refresh of the phishing list.
- * Should be called once from the background script on startup.
+ * Restore persisted state and fetch if the list is overdue.
+ *
+ * Called from the background script every time it starts — a fresh install,
+ * a browser start, and every revival of a terminated service worker all land
+ * here. The recurring 24-hour schedule itself is an alarm (see
+ * shared/alarms.js), not a timer, because timers die with the worker.
+ *
+ * @returns {Promise<void>}
  */
-function startPeriodicRefresh() {
-    if (refreshTimer) return;
-    refreshTimer = setInterval(updatePhishingList, REFRESH_INTERVAL_MS);
+async function initPhishingList() {
+    await ensureDeltaLoaded();
+    return updatePhishingList();
+}
+
+/**
+ * The 24-hour alarm tick. Separate from initPhishingList() because this is the
+ * scheduled refresh and must not be vetoed by the guards that exist to keep
+ * the unscheduled startup path off the network.
+ *
+ * @returns {Promise<void>}
+ */
+async function refreshPhishingListOnSchedule() {
+    return updatePhishingList({ force: true });
 }
 
 /**
@@ -190,21 +316,22 @@ function getDeltaSize() {
 function _reset() {
     deltaBlacklist = new Set();
     lastFetchTime = 0;
+    lastAttemptTime = 0;
     fetchPromise = null;
-    if (refreshTimer) {
-        clearInterval(refreshTimer);
-        refreshTimer = null;
-    }
+    loadPromise = null;
 }
 
-// Load persisted delta on module initialization
-loadDeltaFromStorage();
-
 module.exports = {
     isPhishingDomain,
     updatePhishingList,
-    startPeriodicRefresh,
+    refreshPhishingListOnSchedule,
+    initPhishingList,
+    loadDeltaFromStorage,
     loadConfig,
+    CACHE_TTL_MS,
+    MIN_FETCH_ATTEMPT_INTERVAL_MS,
+    DELTA_STORAGE_KEY,
+    MAX_DELTA_BYTES,
     getBlocklistSize,
     getDeltaSize,
     hostnameVariants,

src/shared/state.js

@@ -21,6 +21,7 @@ const DEFAULT_STATE = {
     deniedSites: {},
     rememberSiteChoice: true,
     showZeroBalanceTokens: true,
+    hideSpoofedSymbols: true,
     hideLowHolderTokens: true,
     hideFraudContracts: true,
     hideDustTransactions: true,
@@ -29,6 +30,7 @@ const DEFAULT_STATE = {
     fraudContracts: [],
     tokenHolderCache: {},
     theme: "system",
+    debugMode: false,
 };
 
 const state = {
@@ -60,6 +62,7 @@ async function saveState() {
         deniedSites: state.deniedSites,
         rememberSiteChoice: state.rememberSiteChoice,
         showZeroBalanceTokens: state.showZeroBalanceTokens,
+        hideSpoofedSymbols: state.hideSpoofedSymbols,
         hideLowHolderTokens: state.hideLowHolderTokens,
         hideFraudContracts: state.hideFraudContracts,
         hideDustTransactions: state.hideDustTransactions,
@@ -68,6 +71,7 @@ async function saveState() {
         fraudContracts: state.fraudContracts,
         tokenHolderCache: state.tokenHolderCache,
         theme: state.theme,
+        debugMode: state.debugMode,
         currentView: state.currentView,
         selectedWallet: state.selectedWallet,
         selectedAddress: state.selectedAddress,
@@ -82,8 +86,11 @@ async function loadState() {
     const result = await storageApi.get("autistmask");
     if (result.autistmask) {
         const saved = result.autistmask;
-        state.hasWallet = saved.hasWallet;
         state.wallets = saved.wallets || [];
+        // Derived, never read from storage: a profile persisted with the flag
+        // out of step with the wallet list would otherwise stay broken on
+        // every load. Nothing depends on the two disagreeing.
+        state.hasWallet = state.wallets.length > 0;
         state.trackedTokens = saved.trackedTokens || [];
         state.networkId = saved.networkId || DEFAULT_STATE.networkId;
         state.rpcUrl = saved.rpcUrl || DEFAULT_STATE.rpcUrl;
@@ -107,6 +114,12 @@ async function loadState() {
             saved.showZeroBalanceTokens !== undefined
                 ? saved.showZeroBalanceTokens
                 : true;
+        // A profile written before this setting existed has no key for it.
+        // It is a safety filter, so absent must load as on, not as undefined.
+        state.hideSpoofedSymbols =
+            saved.hideSpoofedSymbols !== undefined
+                ? saved.hideSpoofedSymbols
+                : true;
         state.hideLowHolderTokens =
             saved.hideLowHolderTokens !== undefined
                 ? saved.hideLowHolderTokens
@@ -128,6 +141,8 @@ async function loadState() {
         state.fraudContracts = saved.fraudContracts || [];
         state.tokenHolderCache = saved.tokenHolderCache || {};
         state.theme = saved.theme || "system";
+        state.debugMode =
+            saved.debugMode !== undefined ? saved.debugMode : false;
         state.currentView = saved.currentView || null;
         state.selectedWallet =
             saved.selectedWallet !== undefined ? saved.selectedWallet : null;

src/shared/transactions.js

@@ -9,6 +9,15 @@
 const { formatEther, formatUnits } = require("ethers");
 const { log, debugFetch } = require("./log");
 const { KNOWN_SYMBOLS, TOKEN_BY_ADDRESS } = require("./tokenList");
+const { parseHoldersCount, isLowHolderCount } = require("./holders");
+
+// Ethereum addresses are case-insensitive: EIP-55 mixed case is a checksum
+// over the address, not part of its identity.  Every address comparison in
+// this file goes through this helper, so an address arriving in checksummed
+// or upper-case form can never be read as a different address.
+function normalizeAddress(addr) {
+    return (addr || "").toLowerCase();
+}
 
 function formatTxValue(val) {
     const parts = val.split(".");
@@ -30,10 +39,10 @@ function parseTx(tx, addrLower) {
     let exactValue = formatEther(rawWei);
     let rawAmount = rawWei;
     let rawUnit = "wei";
-    let direction = from.toLowerCase() === addrLower ? "sent" : "received";
+    let direction = normalizeAddress(from) === addrLower ? "sent" : "received";
     let directionLabel = direction === "sent" ? "Sent" : "Received";
     if (toIsContract && method && method !== "transfer") {
-        const token = TOKEN_BY_ADDRESS.get(to.toLowerCase());
+        const token = TOKEN_BY_ADDRESS.get(normalizeAddress(to));
         if (token) {
             symbol = token.symbol;
         }
@@ -87,7 +96,8 @@ function parseTokenTransfer(tt, addrLower) {
     const to = tt.to?.hash || "";
     const decimals = parseInt(tt.total?.decimals || "18", 10);
     const rawVal = tt.total?.value || "0";
-    const direction = from.toLowerCase() === addrLower ? "sent" : "received";
+    const direction =
+        normalizeAddress(from) === addrLower ? "sent" : "received";
     const sym = tt.token?.symbol || "?";
     return {
         hash: tt.transaction_hash,
@@ -104,18 +114,98 @@ function parseTokenTransfer(tt, addrLower) {
         direction: direction,
         directionLabel: direction === "sent" ? "Sent" : "Received",
         isError: false,
-        contractAddress: (
-            tt.token?.address_hash ||
-            tt.token?.address ||
-            ""
-        ).toLowerCase(),
-        holders: parseInt(tt.token?.holders_count || "0", 10),
+        contractAddress: normalizeAddress(
+            tt.token?.address_hash || tt.token?.address || "",
+        ),
+        // null when the explorer reported no count: unknown, not zero.  The
+        // low-holder filter declines to judge a null, so a legitimate token
+        // is not hidden because a field went missing upstream.
+        holders: parseHoldersCount(tt.token?.holders_count),
     };
 }
 
+// True when a parsed native entry moved no ETH.  Contract-call entries have
+// their amount fields blanked by parseTx, so they are never judged here.
+function movedNoEther(tx) {
+    if (tx.direction === "contract") return false;
+    return BigInt(tx.rawAmount || "0") === BigInt(0);
+}
+
+// Merge parsed normal transactions with parsed ERC-20 token transfers into
+// one row per distinct value movement.  Pure: it reads only its arguments
+// and returns a new list sorted newest block first.
+//
+// The merge key is the transaction hash for the native entry and
+// hash + token contract for each token transfer, so:
+//
+//   - A display-level contract call (a swap and friends, direction
+//     "contract") absorbs every token leg of its hash into the single
+//     native entry, because the legs are hops of one operation rather
+//     than separate movements the user made.
+//   - Otherwise each distinct token contract in the transaction keeps its
+//     own row, so a hash carrying several genuine transfers stays several
+//     rows.
+//   - The native entry of such a transaction is dropped when it moved no
+//     ETH and at least one token transfer shares its hash: that entry is
+//     the ERC-20 call itself, already represented by the token row.  A
+//     native entry that moved ETH survives alongside the token rows, since
+//     the ETH and the tokens are two real movements, and a zero-value
+//     native transaction with no token transfer on its hash survives too.
+function mergeTransactions(txs, tokenTransfers) {
+    const byKey = new Map();
+
+    // Entries are copied so consolidation never writes through to the
+    // caller's objects.
+    for (const tx of txs) {
+        byKey.set(tx.hash, { ...tx });
+    }
+
+    const absorbedHashes = new Set();
+
+    for (const parsed of tokenTransfers) {
+        const existing = byKey.get(parsed.hash);
+        if (existing && existing.direction === "contract") {
+            // For contract calls (swaps), consolidate into the original
+            // tx entry.  Prefer the "received" transfer (swap output)
+            // for the display amount.  If no received transfer exists,
+            // fall back to the first "sent" transfer (swap input).
+            const isReceived = parsed.direction === "received";
+            const needsAmount = !existing.exactValue;
+            if (isReceived || needsAmount) {
+                existing.value = parsed.value;
+                existing.exactValue = parsed.exactValue;
+                existing.rawAmount = parsed.rawAmount;
+                existing.rawUnit = parsed.rawUnit;
+                existing.symbol = parsed.symbol;
+                existing.contractAddress = parsed.contractAddress;
+                existing.holders = parsed.holders;
+            }
+            // Keep the original tx's from/to (the user's address and the
+            // contract they called), not the token transfer's from/to
+            // which may be a router or Permit2 contract.
+            continue;
+        }
+        if (existing && movedNoEther(existing)) {
+            absorbedHashes.add(parsed.hash);
+        }
+        // Every other token transfer gets its own entry.
+        byKey.set(parsed.hash + ":" + (parsed.contractAddress || ""), {
+            ...parsed,
+        });
+    }
+
+    for (const hash of absorbedHashes) {
+        byKey.delete(hash);
+    }
+
+    const merged = [...byKey.values()];
+    merged.sort((a, b) => b.blockNumber - a.blockNumber);
+    return merged;
+}
+
 async function fetchRecentTransactions(address, blockscoutUrl, count = 25) {
     log.debugf("fetchRecentTransactions", address);
-    const addrLower = address.toLowerCase();
+    const addrLower = normalizeAddress(address);
 
     const [txResp, ttResp] = await Promise.all([
         debugFetch(blockscoutUrl + "/addresses/" + address + "/transactions"),
@@ -145,53 +235,11 @@ async function fetchRecentTransactions(address, blockscoutUrl, count = 25) {
     const txJson = txResp.ok ? await txResp.json() : {};
     const ttJson = ttResp.ok ? await ttResp.json() : {};
 
-    const txsByHash = new Map();
+    const txs = mergeTransactions(
+        (txJson.items || []).map((tx) => parseTx(tx, addrLower)),
+        (ttJson.items || []).map((tt) => parseTokenTransfer(tt, addrLower)),
+    );
 
-    for (const tx of txJson.items || []) {
-        txsByHash.set(tx.hash, parseTx(tx, addrLower));
-    }
-
-    // When a token transfer shares a hash with a normal tx, the normal tx
-    // is the contract call (0 ETH) and the token transfer has the real
-    // amount and symbol.  For contract calls (swaps), a single transaction
-    // can produce multiple token transfers (input, intermediates, output).
-    // We consolidate these into the original tx entry using the token
-    // transfer where the user *receives* tokens (the swap output), so
-    // the transaction list shows the final result rather than confusing
-    // intermediate hops.  We preserve the original tx's from/to so the
-    // user sees their own address, not a router or Permit2 contract.
-    for (const tt of ttJson.items || []) {
-        const parsed = parseTokenTransfer(tt, addrLower);
-        const existing = txsByHash.get(parsed.hash);
-        if (existing && existing.direction === "contract") {
-            // For contract calls (swaps), consolidate into the original
-            // tx entry.  Prefer the "received" transfer (swap output)
-            // for the display amount.  If no received transfer exists,
-            // fall back to the first "sent" transfer (swap input).
-            const isReceived = parsed.direction === "received";
-            const needsAmount = !existing.exactValue;
-            if (isReceived || needsAmount) {
-                existing.value = parsed.value;
-                existing.exactValue = parsed.exactValue;
-                existing.rawAmount = parsed.rawAmount;
-                existing.rawUnit = parsed.rawUnit;
-                existing.symbol = parsed.symbol;
-                existing.contractAddress = parsed.contractAddress;
-                existing.holders = parsed.holders;
-            }
-            // Keep the original tx's from/to (the user's address and the
-            // contract they called), not the token transfer's from/to
-            // which may be a router or Permit2 contract.
-            continue;
-        }
-        // Non-contract token transfers get their own entries.
-        const ttKey = parsed.hash + ":" + (parsed.contractAddress || "");
-        txsByHash.set(ttKey, parsed);
-    }
-
-    const txs = [...txsByHash.values()];
-
-    txs.sort((a, b) => b.blockNumber - a.blockNumber);
     const result = txs.slice(0, count);
     log.debugf("fetchRecentTransactions done, count:", result.length);
     return result;
@@ -206,43 +254,55 @@ function isSpoofedSymbol(tx) {
     if (!KNOWN_SYMBOLS.has(symbol)) return false;
     const legit = KNOWN_SYMBOLS.get(symbol);
     if (legit === null) return true; // "ETH" as ERC-20 is always fake
-    return tx.contractAddress !== legit;
+    return normalizeAddress(tx.contractAddress) !== normalizeAddress(legit);
 }
 
 // Pure filter function. Takes raw transactions and filter settings,
 // returns { transactions, newFraudContracts }.
 function filterTransactions(txs, filters = {}) {
     const fraudSet = new Set(
-        (filters.fraudContracts || []).map((a) => a.toLowerCase()),
+        (filters.fraudContracts || []).map(normalizeAddress),
     );
+    // The dust threshold defaults only when it is unset (nullish): a
+    // threshold of 0 is a real value meaning "hide nothing", since no
+    // transaction has a value below 0 gwei.  It is therefore equivalent to
+    // clearing the hide-dust checkbox, and the two controls cannot override
+    // each other in either direction.
+    const dustThresholdGwei = filters.dustThresholdGwei ?? 100000;
     const newFraud = [];
     const filtered = [];
+    // Fail-safe, unlike the three flags below: this one is off only when the
+    // caller says so explicitly, so a caller that omits the key keeps the
+    // check rather than silently losing it.  The setting also governs the
+    // blocklist learning below, which exists only to serve this check —
+    // leaving learning on while the check is off would re-hide the very rows
+    // the user asked to see, through the fraud-contract rule.
+    const hideSpoofed = filters.hideSpoofedSymbols !== false;
 
     for (const tx of txs) {
-        // Always filter spoofed known symbols and record the fraud contract
-        if (isSpoofedSymbol(tx)) {
-            if (tx.contractAddress && !fraudSet.has(tx.contractAddress)) {
-                fraudSet.add(tx.contractAddress);
-                newFraud.push(tx.contractAddress);
+        const contract = normalizeAddress(tx.contractAddress);
+
+        // Filter spoofed known symbols and record the fraud contract
+        if (hideSpoofed && isSpoofedSymbol(tx)) {
+            if (contract && !fraudSet.has(contract)) {
+                fraudSet.add(contract);
+                newFraud.push(contract);
             }
             continue;
         }
 
         // Filter fraud contracts if setting is on
-        if (
-            filters.hideFraudContracts &&
-            tx.contractAddress &&
-            fraudSet.has(tx.contractAddress)
-        ) {
+        if (filters.hideFraudContracts && contract && fraudSet.has(contract)) {
             continue;
         }
 
-        // Filter low-holder tokens (<1000) if setting is on
+        // Filter low-holder tokens (<1000) if setting is on.  A token whose
+        // holder count the explorer did not report is kept: only a reported
+        // count below the threshold is "low".
         if (
             filters.hideLowHolderTokens &&
             tx.contractAddress &&
-            tx.holders !== null &&
-            tx.holders < 1000
+            isLowHolderCount(tx.holders)
         ) {
             continue;
         }
@@ -254,7 +314,7 @@ function filterTransactions(txs, filters = {}) {
             filters.hideDustTransactions &&
             !tx.isContractCall &&
             tx.valueGwei !== null &&
-            tx.valueGwei < (filters.dustThresholdGwei || 100000)
+            tx.valueGwei < dustThresholdGwei
         ) {
             continue;
         }
@@ -265,4 +325,8 @@ function filterTransactions(txs, filters = {}) {
     return { transactions: filtered, newFraudContracts: newFraud };
 }
 
-module.exports = { fetchRecentTransactions, filterTransactions };
+module.exports = {
+    fetchRecentTransactions,
+    filterTransactions,
+    mergeTransactions,
+};

src/shared/txValidation.js

@@ -0,0 +1,171 @@
+// Balance arithmetic for the transaction confirmation screen.
+//
+// Pure: no DOM, no network, no state. Everything is exact integer math on
+// 18-decimal fixed point (wei for ETH), so it can be unit tested directly
+// instead of through the confirmation view. The caller maps the returned
+// codes to the reserved message elements on the screen.
+//
+// Human decimal strings ("1.25") are scaled to 18 decimals for comparison.
+// That scale is independent of a token's own decimals: both the amount and
+// the token balance arrive as human decimal strings, so comparing them at a
+// common scale is exact.
+
+const { parseUnits } = require("ethers");
+
+const SCALE_DECIMALS = 18;
+
+// Whether the asynchronous fee estimate has arrived yet.
+const FEE_PENDING = "pending";
+const FEE_KNOWN = "known";
+const FEE_UNAVAILABLE = "unavailable";
+
+const CODES = {
+    // The amount is not a non-negative number we can do exact arithmetic on.
+    AMOUNT_INVALID: "amount-invalid",
+    // ERC-20: the token amount exceeds the token balance.
+    INSUFFICIENT_TOKEN: "insufficient-token",
+    // ETH: the amount alone already exceeds the ETH balance.
+    INSUFFICIENT_ETH: "insufficient-eth",
+    // ETH: the amount fits, the amount plus the network fee does not.
+    INSUFFICIENT_ETH_WITH_FEE: "insufficient-eth-with-fee",
+    // ERC-20: the token balance covers the transfer, the ETH balance does
+    // not cover the network fee it costs.
+    INSUFFICIENT_ETH_FOR_FEE: "insufficient-eth-for-fee",
+    // The fee estimate has not arrived yet.
+    FEE_PENDING: "fee-pending",
+    // The fee estimate failed. Unknown is never treated as zero.
+    FEE_UNAVAILABLE: "fee-unavailable",
+};
+
+// The fee that must be reserved for a transaction, in wei: the amount the
+// node will require, not the amount the transaction is expected to cost.
+//
+// A send that pins no fee fields is populated by ethers as a type-2
+// (EIP-1559) transaction, and a node validates that against
+// `value + gasLimit * maxFeePerGas`. ethers derives maxFeePerGas as
+// `baseFeePerGas * 2 + maxPriorityFeePerGas`, so reserving `gasPrice`
+// (roughly `baseFee + tip`) under-reserves by about `gasLimit * baseFee` and
+// lets through a transaction the node then rejects with "insufficient funds
+// for gas * price + value". gasPrice is the fallback only for a network that
+// offers no type-2 pricing at all.
+//
+// Returns null when no usable price is available, which the caller must treat
+// as a failed estimate rather than as a free transaction.
+function feeReserveWei(gasLimit, feeData) {
+    if (typeof gasLimit !== "bigint" || gasLimit < 0n) return null;
+    const price = feeData?.maxFeePerGas ?? feeData?.gasPrice;
+    if (typeof price !== "bigint" || price < 0n) return null;
+    return gasLimit * price;
+}
+
+// What the transaction is expected to actually cost, in wei — not what must
+// be reserved for it. A type-2 transaction is charged `baseFee + tip` per gas
+// and refunded the rest of the cap, and `eth_gasPrice` reports roughly that,
+// so gasPrice is the estimate and maxFeePerGas is the reserve. On a network
+// with no type-2 pricing the two are the same number.
+//
+// Display only: nothing gates on this. Returns null on the same unusable
+// inputs as feeReserveWei().
+function feeEstimateWei(gasLimit, feeData) {
+    if (typeof gasLimit !== "bigint" || gasLimit < 0n) return null;
+    const price = feeData?.gasPrice ?? feeData?.maxFeePerGas;
+    if (typeof price !== "bigint" || price < 0n) return null;
+    return gasLimit * price;
+}
+
+// Scale a human decimal string to 18-decimal fixed point. Returns null when
+// the value is not a decimal number or carries more precision than the scale
+// can hold, which the caller must treat as unusable rather than as zero.
+function toFixedPoint(value) {
+    if (typeof value !== "string" && typeof value !== "number") return null;
+    const text = String(value).trim();
+    if (text === "") return null;
+    try {
+        return parseUnits(text, SCALE_DECIMALS);
+    } catch (e) {
+        return null;
+    }
+}
+
+// Validate a pending transfer against the balances that must cover it.
+//
+//   isErc20      — token transfer rather than a native ETH transfer
+//   amount       — human decimal string being sent, non-negative. Anything
+//                  else, a negative value included, is an unusable amount
+//                  rather than an amount that passes every comparison.
+//   ethBalance   — human decimal string, the sender's ETH balance
+//   tokenBalance — human decimal string, the sender's token balance
+//   feeStatus    — FEE_PENDING, FEE_KNOWN or FEE_UNAVAILABLE. Anything else
+//                  is treated as FEE_UNAVAILABLE.
+//   feeWei       — the fee reserve in wei from feeReserveWei(), as a
+//                  non-negative bigint, when FEE_KNOWN. Any other value makes
+//                  the fee unavailable rather than zero.
+//
+// Returns { canSend, codes }. Every code blocks sending: canSend is true
+// only when nothing was found.
+function validateTransfer({
+    isErc20 = false,
+    amount,
+    ethBalance,
+    tokenBalance,
+    feeStatus = FEE_PENDING,
+    feeWei = null,
+} = {}) {
+    const codes = [];
+
+    const amountFp = toFixedPoint(amount);
+    const ethFp = toFixedPoint(ethBalance) ?? 0n;
+
+    // A negative amount parses to a valid bigint, so every comparison below
+    // is trivially false and the send clears the screen — then dies at encode
+    // time in parseEther(). Unusable, on the same footing as a malformed fee.
+    if (amountFp === null || amountFp < 0n) {
+        codes.push(CODES.AMOUNT_INVALID);
+        return { canSend: false, codes };
+    }
+
+    // Fail closed. Anything that is not a usable fee under a recognised
+    // status — a malformed feeWei, or a status this module does not know —
+    // is an unavailable estimate, never a fee of zero. Every such input errs
+    // in the direction that lets money out, so none of them is trusted.
+    const known =
+        feeStatus === FEE_KNOWN && typeof feeWei === "bigint" && feeWei >= 0n;
+    let status = feeStatus;
+    if (feeStatus === FEE_KNOWN && !known) status = FEE_UNAVAILABLE;
+    if (status !== FEE_KNOWN && status !== FEE_PENDING) {
+        status = FEE_UNAVAILABLE;
+    }
+
+    const feeFp = known ? feeWei : null;
+
+    if (isErc20) {
+        const tokenFp = toFixedPoint(tokenBalance) ?? 0n;
+        if (amountFp > tokenFp) codes.push(CODES.INSUFFICIENT_TOKEN);
+        if (feeFp !== null && feeFp > ethFp) {
+            codes.push(CODES.INSUFFICIENT_ETH_FOR_FEE);
+        }
+    } else if (amountFp > ethFp) {
+        codes.push(CODES.INSUFFICIENT_ETH);
+    } else if (feeFp !== null && amountFp + feeFp > ethFp) {
+        codes.push(CODES.INSUFFICIENT_ETH_WITH_FEE);
+    }
+
+    // An unknown fee is never assumed to be zero: sending stays blocked
+    // until the estimate arrives, and stays blocked if it never does.
+    if (status === FEE_PENDING) codes.push(CODES.FEE_PENDING);
+    if (status === FEE_UNAVAILABLE) codes.push(CODES.FEE_UNAVAILABLE);
+
+    return { canSend: codes.length === 0, codes };
+}
+
+module.exports = {
+    CODES,
+    FEE_PENDING,
+    FEE_KNOWN,
+    FEE_UNAVAILABLE,
+    SCALE_DECIMALS,
+    feeReserveWei,
+    feeEstimateWei,
+    toFixedPoint,
+    validateTransfer,
+};

src/shared/vault.js

@@ -1,14 +1,80 @@
 // Vault: password-based encryption of secrets using libsodium.
 // Uses Argon2id for key derivation and XSalsa20-Poly1305 for encryption.
 // All crypto operations are delegated to libsodium — no raw primitives.
+//
+// Backend: WebAssembly, deliberately (#182).
+//
+// libsodium ships one file containing both a WebAssembly build and a
+// wasm2js ("asm.js") translation of it. It tries WASM first and, if
+// instantiation throws, silently swaps in the translation. An extension
+// CSP of plain script-src 'self' refuses WASM, so every popup load used
+// to take that fallback — announced by nothing but an uncaught
+// CompileError in the console.
+//
+// Measured here, same Argon2id parameters (OPSLIMIT_INTERACTIVE,
+// MEMLIMIT_INTERACTIVE = 2 passes over 64MiB), node 22 on this machine:
+// WASM 141-198ms per derivation, wasm2js 3204-3660ms. The work factor is
+// identical either way — it is set by the ops/mem parameters, not by wall
+// time — so the fallback bought no security, it only made every password
+// operation take three and a half seconds, and the wallet asks for the
+// password on every signature.
+//
+// So both manifests declare 'wasm-unsafe-eval' for extension pages. That
+// keyword permits compiling WebAssembly and nothing else: not eval() of
+// strings, not inline script, not remote script. Reaching it requires
+// already executing script in the extension page, which is total
+// compromise on its own. 'unsafe-eval' would be a different matter and is
+// not granted. tests/manifest.test.js pins both policies to exactly
+// "'self' 'wasm-unsafe-eval'" so neither the grant nor the surrounding
+// strictness can drift unnoticed.
+//
+// The fallback still exists, and a wallet that refuses to decrypt is
+// worse than a slow one, so it is not disabled — it is made loud:
+// cryptoBackend() reports which backend this realm can run, ensureReady()
+// logs an error if it is not WASM, tests/vaultBackend.test.js asserts the
+// unit tests exercise the WASM backend, and the end-to-end suite asserts
+// it in the real popup under the real manifest.
 
 const sodium = require("libsodium-wrappers-sumo");
+const { log } = require("./log");
+
+// An empty WebAssembly module: the 8-byte magic number and version header,
+// no sections. Compiling it asks the cheapest possible form of the only
+// question that matters here — may this realm compile WebAssembly at all —
+// which is exactly what a CSP without 'wasm-unsafe-eval' refuses, and
+// exactly what decides which backend libsodium ends up on.
+const EMPTY_WASM_MODULE = new Uint8Array([
+    0x00, 0x61, 0x73, 0x6d, 0x01, 0x00, 0x00, 0x00,
+]);
+
+// "wasm" or "asmjs": whether this realm may compile WebAssembly, which is
+// what decides libsodium's backend when the CSP is the reason it cannot —
+// the case this codebase guards. It probes the realm, not libsodium, so a
+// fallback taken for some other reason (allocation failure, corrupt module)
+// would not be caught here; tests/vaultBackend.test.js checks libsodium's
+// own marker directly.
+async function cryptoBackend() {
+    try {
+        await WebAssembly.compile(EMPTY_WASM_MODULE);
+        return "wasm";
+    } catch (_) {
+        return "asmjs";
+    }
+}
 
 let ready = false;
 
 async function ensureReady() {
     if (!ready) {
         await sodium.ready;
+        if ((await cryptoBackend()) !== "wasm") {
+            log.errorf(
+                "libsodium is running on the wasm2js fallback: this realm " +
+                    "refuses to compile WebAssembly, so every password " +
+                    "derivation costs roughly 20x what it should. See the " +
+                    "backend note in src/shared/vault.js.",
+            );
+        }
         ready = true;
     }
 }
@@ -59,4 +125,4 @@ async function decryptWithPassword(encrypted, password) {
     return sodium.to_string(plaintext);
 }
 
-module.exports = { encryptWithPassword, decryptWithPassword };
+module.exports = { cryptoBackend, decryptWithPassword, encryptWithPassword };

src/shared/wallet.js

@@ -5,6 +5,10 @@ const { Mnemonic, HDNodeWallet, Wallet } = require("ethers");
 const { DEBUG, DEBUG_MNEMONIC, BIP44_ETH_PATH } = require("./constants");
 
 function generateMnemonic() {
+    // This must stay the compile-time DEBUG constant. Do NOT switch it to
+    // isDebug() from log.js: that also ORs in the runtime debugMode flag the
+    // settings toggle drives, which would let a user of a release build turn
+    // the hardcoded, publicly known test phrase back on for real wallets.
     if (DEBUG) return DEBUG_MNEMONIC;
     const m = Mnemonic.fromEntropy(
         globalThis.crypto.getRandomValues(new Uint8Array(16)),
@@ -12,8 +16,60 @@ function generateMnemonic() {
     return m.phrase;
 }
 
+// Every extended key (xprv or xpub) entering the app goes through this.
+//
+// ethers' HDNodeWallet.fromExtendedKey does NOT verify the base58 checksum
+// when the decoded payload is the usual 82 bytes, which is exactly the case
+// the checksum exists to catch: a key with a one-character typo parses into a
+// *different* wallet instead of being rejected. Re-encoding the parsed node
+// reproduces a well-formed key byte for byte, checksum included, so comparing
+// the round trip against the input rejects any altered character. Measured by
+// the sweep in tests/wallet.test.js over every single-character substitution
+// of the BIP-32 vector 1 master key: 199 parse without the round-trip
+// comparison, 0 with it.
+//
+// Returns the parsed node, or null if the key is not a well-formed extended
+// key. Callers turn null into a user-facing error; none of them may fall back
+// to fromExtendedKey directly.
+function parseExtendedKey(key) {
+    if (typeof key !== "string") return null;
+    try {
+        const node = HDNodeWallet.fromExtendedKey(key);
+        return node.extendedKey === key ? node : null;
+    } catch {
+        return null;
+    }
+}
+
+// A master key is at depth 0. Only from there is BIP44_ETH_PATH the absolute
+// path it names; deriving it under an account-level or child key yields
+// addresses that correspond to nothing the user holds.
+const MASTER_DEPTH = 0;
+
+// Parse an extended private key that the BIP-44 Ethereum account path can be
+// derived from, or throw. Both callers derive BIP44_ETH_PATH from the result.
+function masterXprvOrThrow(key) {
+    const node = parseExtendedKey(key);
+    if (!node) {
+        throw new Error("Not a valid extended private key (xprv).");
+    }
+    if (!node.privateKey) {
+        throw new Error("Not an extended private key (xprv).");
+    }
+    if (node.depth !== MASTER_DEPTH) {
+        throw new Error(
+            "Not a master extended private key (xprv): an account-level or " +
+                "child key cannot be imported.",
+        );
+    }
+    return node;
+}
+
 function deriveAddressFromXpub(xpub, index) {
-    const node = HDNodeWallet.fromExtendedKey(xpub);
+    const node = parseExtendedKey(xpub);
+    if (!node) {
+        throw new Error("Not a valid extended key.");
+    }
     return node.deriveChild(index).address;
 }
 
@@ -25,23 +81,28 @@ function hdWalletFromMnemonic(mnemonic) {
 }
 
 function hdWalletFromXprv(xprv) {
-    const root = HDNodeWallet.fromExtendedKey(xprv);
-    if (!root.privateKey) {
-        throw new Error("Not an extended private key (xprv).");
-    }
-    const node = root.derivePath("44'/60'/0'/0");
+    // BIP44_ETH_PATH is absolute ("m/..."), which ethers will only derive from
+    // a depth-0 node. The relative form this used to derive would have been
+    // applied *beneath* an account-level key instead of being refused.
+    const node = masterXprvOrThrow(xprv).derivePath(BIP44_ETH_PATH);
     const xpub = node.neuter().extendedKey;
     const firstAddress = node.deriveChild(0).address;
     return { xpub, firstAddress };
 }
 
+// Well-formed extended private key. Says nothing about depth: the import view
+// reports a non-master key separately, since "check it for a typo" is the
+// wrong advice for a key the user copied correctly.
 function isValidXprv(key) {
-    try {
-        const node = HDNodeWallet.fromExtendedKey(key);
-        return !!node.privateKey;
-    } catch {
-        return false;
-    }
+    const node = parseExtendedKey(key);
+    return !!(node && node.privateKey);
+}
+
+// Whether an extended key is a master key, i.e. the one BIP44_ETH_PATH can be
+// derived from. False for anything parseExtendedKey rejects.
+function isMasterExtendedKey(key) {
+    const node = parseExtendedKey(key);
+    return !!node && node.depth === MASTER_DEPTH;
 }
 
 function addressFromPrivateKey(key) {
@@ -59,9 +120,24 @@ function getSignerForAddress(walletData, addrIndex, decryptedSecret) {
         return node.deriveChild(addrIndex);
     }
     if (walletData.type === "xprv") {
-        const root = HDNodeWallet.fromExtendedKey(decryptedSecret);
-        const node = root.derivePath("44'/60'/0'/0");
-        return node.deriveChild(addrIndex);
+        // Checked here rather than through masterXprvOrThrow so the message
+        // fits the situation: nobody is importing anything at signing time,
+        // and this wallet is already in storage. src/shared/walletDefects.js
+        // catches it at list-render time; this is the backstop behind that.
+        const node = parseExtendedKey(decryptedSecret);
+        if (!node || !node.privateKey) {
+            throw new Error(
+                "This wallet's stored key is not a valid extended private " +
+                    "key, so it cannot sign.",
+            );
+        }
+        if (node.depth !== MASTER_DEPTH) {
+            throw new Error(
+                "This wallet was imported from an extended private key that " +
+                    "is not a master key, so it cannot sign.",
+            );
+        }
+        return node.derivePath(BIP44_ETH_PATH).deriveChild(addrIndex);
     }
     return new Wallet(decryptedSecret);
 }
@@ -70,13 +146,25 @@ function isValidMnemonic(mnemonic) {
     return Mnemonic.isValidMnemonic(mnemonic);
 }
 
+// Only an HD wallet has a recovery phrase. A "key" wallet holds a bare
+// private key and an "xprv" wallet an extended private key; neither can be
+// turned back into words, so neither may ever be offered the phrase display.
+// Written as an allowlist on purpose: a wallet type added later is excluded
+// until someone decides otherwise.
+function walletHasRecoveryPhrase(walletData) {
+    return !!walletData && walletData.type === "hd";
+}
+
 module.exports = {
     generateMnemonic,
+    parseExtendedKey,
     deriveAddressFromXpub,
     hdWalletFromMnemonic,
     hdWalletFromXprv,
     isValidXprv,
+    isMasterExtendedKey,
     addressFromPrivateKey,
     getSignerForAddress,
     isValidMnemonic,
+    walletHasRecoveryPhrase,
 };

src/shared/walletDefects.js

@@ -0,0 +1,86 @@
+// Wallets already in stored state whose key cannot be used, and the copy that
+// explains them.
+//
+// Refusing a non-master extended private key at import time does nothing for a
+// wallet imported before that refusal existed. Such a wallet is detected here,
+// at wallet-list render time, so the user meets the explanation on the list
+// screen rather than an exception on the send screen. Nothing here modifies or
+// removes a wallet: the record is the user's data.
+
+const { parseExtendedKey } = require("./wallet");
+
+const NON_MASTER_XPRV = "non-master-xprv";
+
+// An "xprv" wallet stores the neutered BIP-44 Ethereum node, four levels below
+// the key that was imported: the current import path derives the absolute
+// m/44'/60'/0'/0 from a depth-0 key, and the pre-#210 path derived the same
+// four levels as a relative path beneath whatever depth it was given. A master
+// import therefore stores a depth-4 xpub and a depth-d import stores depth
+// d + 4, which makes the stored xpub an exact read on the imported key's
+// depth — and it is readable without the password, unlike the key itself.
+const BIP44_ETH_XPUB_DEPTH = 4;
+
+const DEFECTS = {
+    [NON_MASTER_XPRV]: {
+        id: NON_MASTER_XPRV,
+        heading: "This wallet's addresses were derived incorrectly.",
+        paragraphs: [
+            "This wallet was imported from an extended private key that is " +
+                "not a master key. An earlier version applied the Ethereum " +
+                "derivation path beneath that key instead of from a master " +
+                "key, so the addresses listed here are not the ones that key " +
+                "produces under the standard path.",
+            "Signing and sending are disabled for this wallet. The addresses " +
+                "do descend from the extended private key you imported, so " +
+                "anything they hold is still reachable by software that " +
+                "repeats the same non-standard derivation. Check them in a " +
+                "block explorer before deciding what to do.",
+            "To see the addresses this key produces under the standard path, " +
+                "import the master extended private key, or the recovery " +
+                "phrase it came from, as a new wallet. Nothing here has been " +
+                "changed or removed, and this wallet stays until you delete " +
+                "it yourself.",
+        ],
+        // One sentence for the places that have room for one: the flash on a
+        // blocked Send, the inline error on the approval screens.
+        shortMessage:
+            "This wallet cannot sign, because it was imported from an " +
+            "extended private key that is not a master key. The wallet list " +
+            "explains what happened.",
+    },
+};
+
+// The defect record for a wallet, or null if there is nothing wrong with it
+// that this module can see. Read-only.
+//
+// A wallet whose xpub will not parse gets null rather than a defect: there is
+// no basis in that case to tell the user their key was not a master key, and a
+// wrong explanation is worse than none.
+function walletDefect(walletData) {
+    if (!walletData || walletData.type !== "xprv") return null;
+    const node = parseExtendedKey(walletData.xpub);
+    if (!node) return null;
+    if (node.depth === BIP44_ETH_XPUB_DEPTH) return null;
+    return DEFECTS[NON_MASTER_XPRV];
+}
+
+// The notice block for the wallet list, or "" for a wallet with no defect.
+// The copy is fixed text from this module, so it needs no escaping.
+function walletDefectHtml(walletData) {
+    const defect = walletDefect(walletData);
+    if (!defect) return "";
+    let html =
+        '<div class="border border-red-500 border-dashed p-2 my-1 text-xs text-red-500">';
+    html += `<div class="font-bold mb-1">${defect.heading}</div>`;
+    for (const p of defect.paragraphs) {
+        html += `<p class="mb-1">${p}</p>`;
+    }
+    html += "</div>";
+    return html;
+}
+
+module.exports = {
+    NON_MASTER_XPRV,
+    walletDefect,
+    walletDefectHtml,
+};

src/shared/walletDelete.js

@@ -0,0 +1,70 @@
+// Wallet deletion state transition, kept out of the view so the selection
+// and broadcast rules are testable without a DOM.
+
+// Remove wallet `walletIdx` from `state` and repair the derived state.
+//
+// Rules:
+//   - `hasWallet` tracks whether any wallet remains.
+//   - Site permissions are dropped for every address of the deleted wallet.
+//   - `selectedWallet` follows the splice: it is decremented when a wallet
+//     before it was removed, and falls back to the first remaining wallet's
+//     first address only when the selection itself was deleted.
+//   - `activeAddress` is only moved when it belonged to the deleted wallet;
+//     the fallback is the first remaining wallet's first address, or null
+//     when no wallet remains.
+//
+// Returns whether `activeAddress` changed, so the caller can broadcast it.
+function removeWalletFromState(state, walletIdx) {
+    const wallet = state.wallets[walletIdx];
+    const addresses = (wallet.addresses || []).map((a) => a.address);
+    const previousActive = state.activeAddress;
+    const activeWasDeleted =
+        previousActive !== null &&
+        previousActive !== undefined &&
+        addresses.some(
+            (a) => a.toLowerCase() === String(previousActive).toLowerCase(),
+        );
+
+    state.wallets.splice(walletIdx, 1);
+
+    for (const addr of addresses) {
+        delete state.allowedSites[addr];
+        delete state.deniedSites[addr];
+    }
+
+    state.hasWallet = state.wallets.length > 0;
+
+    const fallbackAddress = state.hasWallet
+        ? state.wallets[0].addresses[0]?.address || null
+        : null;
+
+    if (!state.hasWallet) {
+        state.selectedWallet = null;
+        state.selectedAddress = null;
+    } else if (state.selectedWallet === walletIdx) {
+        state.selectedWallet = 0;
+        state.selectedAddress = 0;
+    } else if (
+        typeof state.selectedWallet === "number" &&
+        state.selectedWallet > walletIdx
+    ) {
+        state.selectedWallet -= 1;
+    }
+
+    if (activeWasDeleted || !state.hasWallet) {
+        state.activeAddress = fallbackAddress;
+    }
+
+    return { activeAddressChanged: state.activeAddress !== previousActive };
+}
+
+// Tell the background the active address changed, so it re-emits
+// accountsChanged to connected sites. Same call shape as the address
+// switch in the home view.
+function broadcastActiveChanged() {
+    const runtime =
+        typeof browser !== "undefined" ? browser.runtime : chrome.runtime;
+    runtime.sendMessage({ type: "AUTISTMASK_ACTIVE_CHANGED" });
+}
+
+module.exports = { removeWalletFromState, broadcastActiveChanged };

tests/alarms.test.js

@@ -0,0 +1,468 @@
+// Scheduling for the background context.
+//
+// The Chrome MV3 service worker is terminated after roughly 30 seconds idle,
+// so anything scheduled with setInterval/setTimeout dies with it. These tests
+// pin the recurring jobs to the alarms API and to the re-registration path a
+// revived worker runs.
+
+// A controllable clock plus a stubbed balance refresh, so a cadence test can
+// measure the interval between refreshes that actually happened rather than
+// asserting the interval someone intended.
+let mockNow = 0;
+const mockBalanceRefreshAt = [];
+
+// jest.resetModules() clears the call record of every jest.fn, and loading the
+// worker is exactly that call — so anything that must be counted across a load
+// is counted here rather than read off a mock.
+let mockSetIntervalCalls = 0;
+
+// Extension storage reads do not take a constant amount of time, and that is
+// what makes a guard timed to the alarm period bite: backgroundRefresh()
+// stamps its freshness marker after awaiting loadState(), so any read that is
+// quicker than the previous one puts the next tick inside a guard of exactly
+// one period and the tick is skipped. A simulation with a constant latency
+// would sit exactly on the boundary and hide the bug.
+const MOCK_STORAGE_LATENCIES_MS = [7, 3, 11, 2, 9, 4, 13, 1, 6, 5];
+const MOCK_MAX_STORAGE_LATENCY_MS = Math.max(...MOCK_STORAGE_LATENCIES_MS);
+let mockStorageJitter = false;
+let mockStorageOpCount = 0;
+
+function mockStorageTick() {
+    if (!mockStorageJitter) return;
+    mockNow +=
+        MOCK_STORAGE_LATENCIES_MS[
+            mockStorageOpCount++ % MOCK_STORAGE_LATENCIES_MS.length
+        ];
+}
+
+jest.mock("../src/shared/balances", () => ({
+    refreshBalances: jest.fn(async () => {
+        mockBalanceRefreshAt.push(Date.now());
+    }),
+    getProvider: jest.fn(() => ({})),
+}));
+
+function makeAlarmsStub() {
+    const alarms = new Map();
+    const listeners = [];
+    const stub = {
+        created: [],
+        alarms,
+        create: jest.fn((name, info) => {
+            stub.created.push({ name, info });
+            alarms.set(name, { name, ...info });
+        }),
+        get: jest.fn(async (name) => alarms.get(name)),
+        clear: jest.fn(async (name) => alarms.delete(name)),
+        onAlarm: {
+            addListener: jest.fn((fn) => listeners.push(fn)),
+        },
+        fire: (name) => {
+            for (const fn of listeners) fn({ name });
+        },
+        listenerCount: () => listeners.length,
+    };
+    return stub;
+}
+
+describe("alarms module", () => {
+    let alarmsStub;
+    let alarmsMod;
+
+    beforeEach(() => {
+        jest.resetModules();
+        alarmsStub = makeAlarmsStub();
+        global.chrome = { alarms: alarmsStub };
+        alarmsMod = require("../src/shared/alarms");
+    });
+
+    afterEach(() => {
+        delete global.chrome;
+    });
+
+    test("ensureRecurringAlarms schedules both recurring jobs", async () => {
+        const created = await alarmsMod.ensureRecurringAlarms();
+        expect(created).toEqual({ balance: true, phishing: true });
+
+        const names = alarmsStub.created.map((c) => c.name).sort();
+        expect(names).toEqual(
+            [
+                alarmsMod.BALANCE_REFRESH_ALARM,
+                alarmsMod.PHISHING_REFRESH_ALARM,
+            ].sort(),
+        );
+    });
+
+    test("the balance refresh keeps its 60-second cadence", async () => {
+        await alarmsMod.ensureRecurringAlarms();
+        const balance = alarmsStub.alarms.get(alarmsMod.BALANCE_REFRESH_ALARM);
+        expect(balance.periodInMinutes).toBe(1);
+    });
+
+    test("the phishing refresh keeps its 24-hour cadence", async () => {
+        await alarmsMod.ensureRecurringAlarms();
+        const phishing = alarmsStub.alarms.get(
+            alarmsMod.PHISHING_REFRESH_ALARM,
+        );
+        expect(phishing.periodInMinutes).toBe(24 * 60);
+    });
+
+    test("no period is below the browser-enforced minimum", async () => {
+        // A period under one minute is silently clamped by the browser, so a
+        // request for one would mean the documented cadence is not the real
+        // one. Every period must be a whole minute at or above the minimum.
+        await alarmsMod.ensureRecurringAlarms();
+        for (const { info } of alarmsStub.created) {
+            expect(info.periodInMinutes).toBeGreaterThanOrEqual(
+                alarmsMod.MIN_ALARM_PERIOD_MINUTES,
+            );
+            expect(Number.isInteger(info.periodInMinutes)).toBe(true);
+        }
+    });
+
+    test("a revived worker does not reset an existing alarm's schedule", async () => {
+        await alarmsMod.ensureRecurringAlarms();
+        expect(alarmsStub.create).toHaveBeenCalledTimes(2);
+
+        // Every wake re-runs the startup path. Re-creating an alarm restarts
+        // its period, so a busy extension would push the next fire out
+        // forever and the job would never run.
+        const again = await alarmsMod.ensureRecurringAlarms();
+        expect(again).toEqual({ balance: false, phishing: false });
+        expect(alarmsStub.create).toHaveBeenCalledTimes(2);
+    });
+
+    test("a missing alarm is re-created on the next start", async () => {
+        await alarmsMod.ensureRecurringAlarms();
+        await alarmsStub.clear(alarmsMod.BALANCE_REFRESH_ALARM);
+
+        const again = await alarmsMod.ensureRecurringAlarms();
+        expect(again).toEqual({ balance: true, phishing: false });
+        expect(
+            alarmsStub.alarms.get(alarmsMod.BALANCE_REFRESH_ALARM),
+        ).toBeDefined();
+    });
+
+    test("an alarm left over with a stale period is re-created", async () => {
+        // An install carries its alarms across an extension update, so a
+        // period changed in a new release only ever reaches users if the
+        // stale one is reconciled.
+        alarmsStub.create(alarmsMod.PHISHING_REFRESH_ALARM, {
+            periodInMinutes: 7 * 24 * 60,
+        });
+        alarmsStub.create.mockClear();
+
+        const created = await alarmsMod.ensureRecurringAlarms();
+        expect(created.phishing).toBe(true);
+        expect(
+            alarmsStub.alarms.get(alarmsMod.PHISHING_REFRESH_ALARM)
+                .periodInMinutes,
+        ).toBe(alarmsMod.PHISHING_REFRESH_PERIOD_MINUTES);
+    });
+
+    test("reconciling a period settles instead of re-creating forever", async () => {
+        alarmsStub.create(alarmsMod.BALANCE_REFRESH_ALARM, {
+            periodInMinutes: 30,
+        });
+        await alarmsMod.ensureRecurringAlarms();
+        alarmsStub.create.mockClear();
+
+        const again = await alarmsMod.ensureRecurringAlarms();
+        expect(again).toEqual({ balance: false, phishing: false });
+        expect(alarmsStub.create).not.toHaveBeenCalled();
+    });
+
+    test("handlers are dispatched by alarm name from one listener", () => {
+        const balance = jest.fn();
+        const phishing = jest.fn();
+        expect(
+            alarmsMod.registerAlarmHandlers({
+                [alarmsMod.BALANCE_REFRESH_ALARM]: balance,
+                [alarmsMod.PHISHING_REFRESH_ALARM]: phishing,
+            }),
+        ).toBe(true);
+        expect(alarmsStub.listenerCount()).toBe(1);
+
+        alarmsStub.fire(alarmsMod.BALANCE_REFRESH_ALARM);
+        expect(balance).toHaveBeenCalledTimes(1);
+        expect(phishing).not.toHaveBeenCalled();
+
+        alarmsStub.fire(alarmsMod.PHISHING_REFRESH_ALARM);
+        expect(phishing).toHaveBeenCalledTimes(1);
+
+        alarmsStub.fire("some-other-extension-alarm");
+        expect(balance).toHaveBeenCalledTimes(1);
+        expect(phishing).toHaveBeenCalledTimes(1);
+    });
+
+    test("Firefox MV2 gets the same treatment via browser.alarms", async () => {
+        // Both targets are built from one bundle. MV2 has a persistent
+        // background page, but it takes the alarm path too, so the schedule
+        // is the same code on both browsers.
+        jest.resetModules();
+        const firefoxAlarms = makeAlarmsStub();
+        global.browser = { alarms: firefoxAlarms };
+        try {
+            const mod = require("../src/shared/alarms");
+            const created = await mod.ensureRecurringAlarms();
+            expect(created).toEqual({ balance: true, phishing: true });
+            expect(firefoxAlarms.created).toHaveLength(2);
+            // The Chrome stub must not have been touched.
+            expect(alarmsStub.create).not.toHaveBeenCalled();
+        } finally {
+            delete global.browser;
+        }
+    });
+
+    test("a context without the alarms API degrades instead of throwing", async () => {
+        jest.resetModules();
+        delete global.chrome;
+        const mod = require("../src/shared/alarms");
+        await expect(mod.ensureRecurringAlarms()).resolves.toEqual({
+            balance: false,
+            phishing: false,
+        });
+        expect(mod.registerAlarmHandlers({})).toBe(false);
+    });
+});
+
+// Loads the background worker against stubbed browser APIs. The returned
+// store is the extension storage the worker sees, so a test can seed wallet
+// state and read back what the worker persisted.
+function loadBackground(initialStore = {}) {
+    const storageStore = initialStore;
+    const alarmsStub = makeAlarmsStub();
+    const listeners = { onInstalled: [], onStartup: [] };
+    global.chrome = {
+        alarms: alarmsStub,
+        storage: {
+            local: {
+                get: async (key) => {
+                    mockStorageTick();
+                    return Object.prototype.hasOwnProperty.call(
+                        storageStore,
+                        key,
+                    )
+                        ? { [key]: storageStore[key] }
+                        : {};
+                },
+                set: async (items) => {
+                    mockStorageTick();
+                    Object.assign(storageStore, items);
+                },
+                remove: async (key) => {
+                    delete storageStore[key];
+                },
+            },
+        },
+        runtime: {
+            onMessage: { addListener: jest.fn() },
+            onConnect: { addListener: jest.fn() },
+            onInstalled: {
+                addListener: jest.fn((fn) => listeners.onInstalled.push(fn)),
+            },
+            onStartup: {
+                addListener: jest.fn((fn) => listeners.onStartup.push(fn)),
+            },
+            getURL: (p) => "chrome-extension://test/" + p,
+            lastError: null,
+        },
+        windows: {
+            onRemoved: { addListener: jest.fn() },
+            create: jest.fn(),
+        },
+        tabs: { query: jest.fn(), sendMessage: jest.fn() },
+        action: { setPopup: jest.fn() },
+    };
+    global.fetch = jest.fn(async () => ({
+        ok: true,
+        json: async () => ({ blacklist: [] }),
+    }));
+    jest.resetModules();
+    require("../src/background/index");
+    return { alarmsStub, listeners, store: storageStore };
+}
+
+// Flush the promise chains the startup path and the alarm handlers run on.
+async function settle() {
+    for (let i = 0; i < 3; i++) {
+        await new Promise((resolve) => setImmediate(resolve));
+    }
+}
+
+describe("background worker scheduling", () => {
+    let alarmsStub;
+    let timers;
+
+    beforeEach(() => {
+        mockSetIntervalCalls = 0;
+        timers = {
+            setInterval: jest
+                .spyOn(global, "setInterval")
+                .mockImplementation(() => {
+                    mockSetIntervalCalls++;
+                    return 0;
+                }),
+        };
+    });
+
+    afterEach(() => {
+        timers.setInterval.mockRestore();
+        delete global.chrome;
+        delete global.fetch;
+        jest.resetModules();
+    });
+
+    test("startup schedules the recurring jobs as alarms, not timers", async () => {
+        alarmsStub = loadBackground().alarmsStub;
+        // Let the startup path's promises settle.
+        await settle();
+
+        const names = alarmsStub.created.map((c) => c.name).sort();
+        const {
+            BALANCE_REFRESH_ALARM,
+            PHISHING_REFRESH_ALARM,
+        } = require("../src/shared/alarms");
+        expect(names).toEqual(
+            [BALANCE_REFRESH_ALARM, PHISHING_REFRESH_ALARM].sort(),
+        );
+        expect(mockSetIntervalCalls).toBe(0);
+    });
+
+    test("an onAlarm listener is installed on startup", async () => {
+        alarmsStub = loadBackground().alarmsStub;
+        await settle();
+        expect(alarmsStub.listenerCount()).toBe(1);
+    });
+
+    test("onInstalled and onStartup both re-establish the schedule", async () => {
+        const loaded = loadBackground();
+        alarmsStub = loaded.alarmsStub;
+        await settle();
+
+        expect(loaded.listeners.onInstalled).toHaveLength(1);
+        expect(loaded.listeners.onStartup).toHaveLength(1);
+
+        // A browser start after the alarms were dropped must put them back.
+        alarmsStub.alarms.clear();
+        alarmsStub.created.length = 0;
+        loaded.listeners.onStartup[0]();
+        await settle();
+        expect(alarmsStub.created).toHaveLength(2);
+    });
+
+    test("the install-time listener and the top-level call share one run", async () => {
+        // On a fresh install both fire, close enough that both could observe
+        // an alarm missing and create it — and a second create restarts the
+        // period the first one just set.
+        const loaded = loadBackground();
+        alarmsStub = loaded.alarmsStub;
+        loaded.listeners.onInstalled[0]();
+        await settle();
+
+        expect(alarmsStub.created).toHaveLength(2);
+        expect(alarmsStub.created.map((c) => c.name).sort()).toEqual(
+            [
+                "autistmask-balance-refresh",
+                "autistmask-phishing-refresh",
+            ].sort(),
+        );
+    });
+});
+
+// The alarm period alone must set the cadence. A freshness guard timed to the
+// period vetoes the very tick it gates, because the guard is measured from
+// when the last run finished and the alarm fires one run-duration before that.
+// These tests measure the interval between refreshes that actually ran.
+describe("balance refresh steady-state cadence", () => {
+    const {
+        BALANCE_REFRESH_PERIOD_MINUTES,
+        BALANCE_REFRESH_ALARM,
+    } = require("../src/shared/alarms");
+    const PERIOD_MS = BALANCE_REFRESH_PERIOD_MINUTES * 60 * 1000;
+
+    let clockSpy;
+    let timerSpy;
+
+    function seededStore() {
+        return {
+            autistmask: {
+                hasWallet: true,
+                wallets: [
+                    { address: "0x0000000000000000000000000000000000000001" },
+                ],
+                lastBalanceRefresh: 0,
+            },
+        };
+    }
+
+    beforeEach(() => {
+        mockNow = Date.UTC(2026, 0, 1, 0, 0, 0);
+        mockBalanceRefreshAt.length = 0;
+        mockSetIntervalCalls = 0;
+        mockStorageOpCount = 0;
+        mockStorageJitter = false;
+        clockSpy = jest.spyOn(Date, "now").mockImplementation(() => mockNow);
+        timerSpy = jest.spyOn(global, "setInterval").mockImplementation(() => {
+            mockSetIntervalCalls++;
+            return 0;
+        });
+    });
+
+    afterEach(() => {
+        mockStorageJitter = false;
+        clockSpy.mockRestore();
+        timerSpy.mockRestore();
+        delete global.chrome;
+        delete global.fetch;
+        jest.resetModules();
+    });
+
+    test("ten alarm ticks produce ten refreshes, one per period", async () => {
+        const { alarmsStub } = loadBackground(seededStore());
+        await settle();
+        mockStorageJitter = true;
+
+        const TICKS = 10;
+        let tickAt = mockNow + PERIOD_MS;
+        for (let i = 0; i < TICKS; i++) {
+            mockNow = tickAt;
+            tickAt += PERIOD_MS;
+            alarmsStub.fire(BALANCE_REFRESH_ALARM);
+            await settle();
+        }
+
+        // No tick was a no-op. This is the assertion that fails when the guard
+        // is timed to the alarm period.
+        expect(mockBalanceRefreshAt).toHaveLength(TICKS);
+
+        // And the observed cadence is one period, not two.
+        const intervals = mockBalanceRefreshAt
+            .slice(1)
+            .map((t, i) => t - mockBalanceRefreshAt[i]);
+        for (const interval of intervals) {
+            expect(interval).toBeGreaterThanOrEqual(
+                PERIOD_MS - MOCK_MAX_STORAGE_LATENCY_MS,
+            );
+            expect(interval).toBeLessThanOrEqual(
+                PERIOD_MS + MOCK_MAX_STORAGE_LATENCY_MS,
+            );
+        }
+    });
+
+    test("a refresh an open popup just did still suppresses the tick", async () => {
+        // The guard's actual job, and the reason it is shortened rather than
+        // removed: while the popup is open it refreshes every 10 seconds and
+        // stamps the same field, and the background job has nothing to add.
+        const store = seededStore();
+        const { alarmsStub } = loadBackground(store);
+        await settle();
+
+        mockNow += PERIOD_MS;
+        store.autistmask.lastBalanceRefresh = mockNow - 10 * 1000;
+        alarmsStub.fire(BALANCE_REFRESH_ALARM);
+        await settle();
+
+        expect(mockBalanceRefreshAt).toHaveLength(0);
+    });
+});

tests/approvalVerify.test.js

@@ -0,0 +1,355 @@
+const { Network, Transaction, Wallet } = require("ethers");
+const {
+    verifySignedTx,
+    verifySignature,
+    sameAddress,
+} = require("../src/shared/approvalVerify");
+const { getSignerForAddress } = require("../src/shared/wallet");
+
+// Fixed test keys — never used for anything but these tests.
+const SIGNER_KEY =
+    "0x59c6995e998f97a5a0044966f0945389dc9e86dae88c7a8412f4603b6b78690d";
+const OTHER_KEY =
+    "0x5de4111afa1a4b94908f83103eb1f1706367c2e68ca870fc3fb9a804cdab365a";
+
+const signer = new Wallet(SIGNER_KEY);
+const other = new Wallet(OTHER_KEY);
+
+const RECIPIENT = "0x66133E8ea0f5D1d612D2502a968757D1048c214a";
+const OTHER_RECIPIENT = "0xdAC17F958D2ee523a2206206994597C13D831ec7";
+
+// Approved parameters as a dApp would supply them over eth_sendTransaction.
+const TX_PARAMS = {
+    from: signer.address,
+    to: RECIPIENT,
+    value: "0x2386f26fc10000",
+    data: "0xdeadbeef",
+    gas: "0x5208",
+};
+
+// Build a signable transaction from approved params. The popup does the same
+// thing through populateTransaction(); here the fields are fixed so the test
+// needs no provider.
+function txFor(params) {
+    return {
+        chainId: 1,
+        nonce: 7,
+        gasLimit: 100000n,
+        maxFeePerGas: 2000000000n,
+        maxPriorityFeePerGas: 1000000000n,
+        type: 2,
+        to: params.to,
+        value: params.value === undefined ? 0n : BigInt(params.value),
+        data: params.data || "0x",
+    };
+}
+
+async function signedFor(params, withWallet) {
+    return (withWallet || signer).signTransaction(txFor(params));
+}
+
+describe("sameAddress", () => {
+    test("compares checksummed and lowercase forms as equal", () => {
+        expect(sameAddress(RECIPIENT, RECIPIENT.toLowerCase())).toBe(true);
+    });
+
+    test("treats two absent addresses as equal (contract creation)", () => {
+        expect(sameAddress(null, undefined)).toBe(true);
+        expect(sameAddress("", null)).toBe(true);
+    });
+
+    test("treats one absent address as unequal", () => {
+        expect(sameAddress(RECIPIENT, null)).toBe(false);
+        expect(sameAddress(null, RECIPIENT)).toBe(false);
+    });
+
+    test("does not throw on values that are not addresses", () => {
+        expect(sameAddress("not-an-address", RECIPIENT)).toBe(false);
+    });
+});
+
+describe("verifySignedTx", () => {
+    test("accepts the approved transaction signed by the approved address", async () => {
+        const raw = await signedFor(TX_PARAMS);
+        const parsed = verifySignedTx(raw, TX_PARAMS, signer.address);
+        expect(parsed.from).toBe(signer.address);
+        expect(parsed.hash).toBe(Transaction.from(raw).hash);
+    });
+
+    test("accepts a contract creation with no recipient", async () => {
+        const params = { to: undefined, value: "0x0", data: "0x600160005500" };
+        const raw = await signedFor(params);
+        expect(() => verifySignedTx(raw, params, signer.address)).not.toThrow();
+    });
+
+    test("accepts an absent value as zero", async () => {
+        const approved = { to: RECIPIENT, data: "0x" };
+        const raw = await signedFor(approved);
+        expect(() =>
+            verifySignedTx(raw, approved, signer.address),
+        ).not.toThrow();
+    });
+
+    test("accepts call data whose case differs from the approval", async () => {
+        const approved = { to: RECIPIENT, value: "0x0", data: "0xDEADBEEF" };
+        const raw = await signedFor(approved);
+        expect(() =>
+            verifySignedTx(raw, approved, signer.address),
+        ).not.toThrow();
+    });
+
+    test("rejects a swapped recipient", async () => {
+        const raw = await signedFor({
+            ...TX_PARAMS,
+            to: OTHER_RECIPIENT,
+        });
+        expect(() => verifySignedTx(raw, TX_PARAMS, signer.address)).toThrow(
+            /approved recipient/,
+        );
+    });
+
+    test("rejects an inflated value", async () => {
+        const raw = await signedFor({
+            ...TX_PARAMS,
+            value: "0x4563918244f40000",
+        });
+        expect(() => verifySignedTx(raw, TX_PARAMS, signer.address)).toThrow(
+            /approved value/,
+        );
+    });
+
+    test("rejects substituted call data", async () => {
+        const raw = await signedFor({ ...TX_PARAMS, data: "0xc0ffee" });
+        expect(() => verifySignedTx(raw, TX_PARAMS, signer.address)).toThrow(
+            /approved call data/,
+        );
+    });
+
+    test("rejects a transaction signed by a different address", async () => {
+        const raw = await signedFor(TX_PARAMS, other);
+        expect(() => verifySignedTx(raw, TX_PARAMS, signer.address)).toThrow(
+            /different address/,
+        );
+    });
+
+    test("rejects an unsigned transaction", () => {
+        const unsigned = Transaction.from(txFor(TX_PARAMS)).unsignedSerialized;
+        expect(() =>
+            verifySignedTx(unsigned, TX_PARAMS, signer.address),
+        ).toThrow(/no valid signature/);
+    });
+
+    test("rejects a missing or malformed payload", () => {
+        expect(() =>
+            verifySignedTx(undefined, TX_PARAMS, signer.address),
+        ).toThrow(/missing or malformed/);
+        expect(() => verifySignedTx("nope", TX_PARAMS, signer.address)).toThrow(
+            /missing or malformed/,
+        );
+        expect(() =>
+            verifySignedTx("0xc0ffee", TX_PARAMS, signer.address),
+        ).toThrow(/could not be decoded/);
+    });
+
+    test("every rejection message is a full sentence", async () => {
+        const raw = await signedFor({ ...TX_PARAMS, to: OTHER_RECIPIENT });
+        try {
+            verifySignedTx(raw, TX_PARAMS, signer.address);
+            throw new Error("expected a rejection");
+        } catch (e) {
+            expect(e.message).toMatch(/^[A-Z].*\.$/);
+        }
+    });
+});
+
+const TYPED_DATA = JSON.stringify({
+    domain: {
+        name: "AutistMask Test",
+        version: "1",
+        chainId: 1,
+        verifyingContract: OTHER_RECIPIENT,
+    },
+    primaryType: "Mail",
+    types: {
+        EIP712Domain: [
+            { name: "name", type: "string" },
+            { name: "version", type: "string" },
+            { name: "chainId", type: "uint256" },
+            { name: "verifyingContract", type: "address" },
+        ],
+        Mail: [
+            { name: "from", type: "address" },
+            { name: "to", type: "address" },
+            { name: "contents", type: "string" },
+        ],
+    },
+    message: {
+        from: signer.address,
+        to: RECIPIENT,
+        contents: "hello",
+    },
+});
+
+describe("verifySignature", () => {
+    // "Hello AutistMask" as the hex string a dApp passes to personal_sign.
+    const MESSAGE = "0x48656c6c6f204175746973744d61736b";
+    const personalParams = {
+        method: "personal_sign",
+        message: MESSAGE,
+        from: signer.address,
+    };
+    const typedParams = {
+        method: "eth_signTypedData_v4",
+        typedData: TYPED_DATA,
+        from: signer.address,
+    };
+
+    async function signPersonal(withWallet) {
+        return (withWallet || signer).signMessage(
+            Buffer.from(MESSAGE.slice(2), "hex"),
+        );
+    }
+
+    async function signTyped(withWallet) {
+        const { domain, types, message } = JSON.parse(TYPED_DATA);
+        delete types.EIP712Domain;
+        return (withWallet || signer).signTypedData(domain, types, message);
+    }
+
+    test("accepts a personal_sign signature from the approved address", async () => {
+        const signature = await signPersonal();
+        expect(verifySignature(personalParams, signature, signer.address)).toBe(
+            signer.address,
+        );
+    });
+
+    test("accepts an eth_sign signature the same way", async () => {
+        const signature = await signPersonal();
+        const params = { ...personalParams, method: "eth_sign" };
+        expect(() =>
+            verifySignature(params, signature, signer.address),
+        ).not.toThrow();
+    });
+
+    test("accepts a typed data signature from the approved address", async () => {
+        const signature = await signTyped();
+        expect(verifySignature(typedParams, signature, signer.address)).toBe(
+            signer.address,
+        );
+    });
+
+    test("does not mutate the approved typed data while verifying", async () => {
+        const signature = await signTyped();
+        const before = typedParams.typedData;
+        verifySignature(typedParams, signature, signer.address);
+        expect(typedParams.typedData).toBe(before);
+        expect(
+            JSON.parse(typedParams.typedData).types.EIP712Domain,
+        ).toBeDefined();
+    });
+
+    test("rejects a personal_sign signature from a different address", async () => {
+        const signature = await signPersonal(other);
+        expect(() =>
+            verifySignature(personalParams, signature, signer.address),
+        ).toThrow(/different address/);
+    });
+
+    test("rejects a typed data signature from a different address", async () => {
+        const signature = await signTyped(other);
+        expect(() =>
+            verifySignature(typedParams, signature, signer.address),
+        ).toThrow(/different address/);
+    });
+
+    test("rejects a signature over a different message", async () => {
+        const signature = await signer.signMessage(
+            Buffer.from("00112233", "hex"),
+        );
+        expect(() =>
+            verifySignature(personalParams, signature, signer.address),
+        ).toThrow(/different address/);
+    });
+
+    test("rejects a missing or malformed signature", async () => {
+        expect(() =>
+            verifySignature(personalParams, undefined, signer.address),
+        ).toThrow(/missing or malformed/);
+        expect(() =>
+            verifySignature(personalParams, "0x1234", signer.address),
+        ).toThrow(/could not be verified/);
+    });
+});
+
+// End-to-end over the messaging boundary, without a browser: run the exact
+// sequence the approval popup runs, then hand the artifact to the exact check
+// the background runs before it broadcasts or resolves. Only what the popup
+// puts on the wire is passed along, so this also pins down that the wire
+// payload is sufficient on its own.
+describe("popup signing sequence to background verification", () => {
+    // Stand-in for the JSON-RPC provider. populateTransaction only needs the
+    // nonce, the gas estimate, the network and the fee data.
+    const fakeProvider = {
+        getNetwork: async () => Network.from(1),
+        getTransactionCount: async () => 7,
+        estimateGas: async () => 21000n,
+        getFeeData: async () => ({
+            gasPrice: 2000000000n,
+            maxFeePerGas: 2000000000n,
+            maxPriorityFeePerGas: 1000000000n,
+        }),
+    };
+
+    // A private-key wallet as it is persisted in state, so the test goes
+    // through getSignerForAddress() the way the popup does.
+    const walletData = { type: "privkey" };
+
+    async function popupSignsTx(txParams) {
+        const localSigner = getSignerForAddress(walletData, 0, SIGNER_KEY);
+        const connected = localSigner.connect(fakeProvider);
+        const populated = await connected.populateTransaction(txParams);
+        delete populated.from;
+        return connected.signTransaction(populated);
+    }
+
+    test("a populated, signed transaction is accepted and broadcastable", async () => {
+        const rawSignedTx = await popupSignsTx(TX_PARAMS);
+        const parsed = verifySignedTx(rawSignedTx, TX_PARAMS, signer.address);
+        expect(parsed.nonce).toBe(7);
+        expect(parsed.chainId).toBe(1n);
+        expect(parsed.gasLimit).toBe(21000n);
+        expect(parsed.to).toBe(RECIPIENT);
+        expect(parsed.value).toBe(BigInt(TX_PARAMS.value));
+        expect(parsed.data).toBe(TX_PARAMS.data);
+        expect(parsed.signature).not.toBeNull();
+    });
+
+    test("the wire payload carries no password and no secret", async () => {
+        const rawSignedTx = await popupSignsTx(TX_PARAMS);
+        const payload = {
+            type: "AUTISTMASK_TX_RESPONSE",
+            id: "test-approval-id",
+            approved: true,
+            rawSignedTx,
+        };
+        expect(Object.keys(payload).sort()).toEqual([
+            "approved",
+            "id",
+            "rawSignedTx",
+            "type",
+        ]);
+        const wire = JSON.stringify(payload).toLowerCase();
+        expect(wire).not.toContain("password");
+        expect(wire).not.toContain(SIGNER_KEY.slice(2).toLowerCase());
+    });
+
+    test("the background rejects a transaction the popup did not approve", async () => {
+        const rawSignedTx = await popupSignsTx({
+            ...TX_PARAMS,
+            to: OTHER_RECIPIENT,
+        });
+        expect(() =>
+            verifySignedTx(rawSignedTx, TX_PARAMS, signer.address),
+        ).toThrow(/approved recipient/);
+    });
+});

tests/constants.test.js

@@ -1,4 +1,6 @@
 const {
+    DEBUG,
+    BUILD_DEBUG_MARKER,
     ETHEREUM_MAINNET_CHAIN_ID,
     DEFAULT_RPC_URL,
     BIP44_ETH_PATH,
@@ -19,6 +21,24 @@ describe("constants", () => {
         expect(BIP44_ETH_PATH).toBe("m/44'/60'/0'/0");
     });
 
+    // This does not replace script/verify-build, which is the only thing that
+    // can see the compiled DEBUG state of a real bundle. It pins the source
+    // invariant that the marker tracks DEBUG, so the two cannot be edited
+    // apart and leave verify-build asserting something that is no longer the
+    // flag the code branches on.
+    test("build debug marker is derived from DEBUG", () => {
+        expect(BUILD_DEBUG_MARKER).toBe(
+            DEBUG ? "autistmask-build-debug=on" : "autistmask-build-debug=off",
+        );
+    });
+
+    // Outside a bundle there is no __BUILD_DEBUG__ define, and the fallback
+    // must be the safe one.
+    test("DEBUG is off when loaded outside a bundle", () => {
+        expect(DEBUG).toBe(false);
+        expect(BUILD_DEBUG_MARKER).toBe("autistmask-build-debug=off");
+    });
+
     test("exports ERC-20 ABI with expected functions", () => {
         expect(Array.isArray(ERC20_ABI)).toBe(true);
         expect(ERC20_ABI.length).toBeGreaterThan(0);

tests/e2e/harness.js

@@ -0,0 +1,349 @@
+// End-to-end harness: launches a real Chromium with the unpacked MV3
+// build loaded, collects every uncaught page error and console.error, and
+// exposes the popup flows the tests drive.
+//
+// This runs inside the pinned Playwright container; see script/test-e2e.
+// It is deliberately NOT part of make check — REPO_POLICIES.md caps
+// make test at 20 seconds and a browser suite does not fit.
+
+"use strict";
+
+const fs = require("fs");
+const os = require("os");
+const path = require("path");
+
+const { chromium } = require("playwright-core");
+const { installNetworkStubs } = require("./network");
+
+const REPO_ROOT = path.resolve(__dirname, "..", "..");
+const EXT_PATH = path.join(REPO_ROOT, "dist", "chrome");
+
+// Page errors that are known, tracked, and deliberately tolerated. Every
+// entry must name the issue that will remove it. This list is the one
+// concession in an otherwise zero-tolerance policy: an uncaught error is
+// how this harness caught issue #150 in the first place.
+//
+// Empty, and worth keeping that way. Its only entry was the WASM
+// CompileError libsodium provoked on every popup load, deleted with #182
+// when both manifests started allowing WASM; the run that used to need it
+// is now the run that proves the fix.
+const ALLOWED_ERRORS = [];
+
+function isAllowed(text) {
+    return ALLOWED_ERRORS.some((a) => a.pattern.test(text));
+}
+
+// Collects every uncaught page error, console.error and unstubbed
+// request, and hands each one to exactly one reporter.
+//
+// This deliberately has NO window API. It used to expose mark()/since()
+// so a test could ask for "the errors since I started", and that shape
+// produced a green run that proved nothing twice over: first the mark
+// started after test 1, so everything recorded during launch was
+// discarded, then the tail after the final test was never read at all. In
+// both cases a record fell outside somebody's window and vanished, which
+// is the precise failure this harness exists to prevent.
+//
+// So there is no window left to fall outside of. take() is the only
+// reader and it always takes everything outstanding, so successive takes
+// partition the entire record stream with no gaps, and the runner turns
+// every record it reads into a failure.
+//
+// Observation ends when the browser context is closed. Nothing records
+// after that — the route handler and the console listeners are gone with
+// the context — so there is no post-teardown phase to collect, and this
+// class deliberately offers no mechanism pretending to cover one.
+//
+// One narrow exception exists, and it is not a mute: expect(). A test that
+// drives a failure path on purpose — a refused gas estimate, say — provokes
+// the console.error the code is supposed to emit, and that error is the
+// behaviour under test rather than an escape. Declaring it consumes exactly
+// one matching record and no more, and an expectation nothing matched fails
+// its test just as an unexpected error does. So it cannot be used to
+// silence anything: it can only assert that a specific error happened.
+class ErrorCollector {
+    constructor() {
+        this.entries = [];
+        this.taken = 0;
+        this.expectations = [];
+    }
+
+    // Declare a console.error this test is about to cause deliberately.
+    // `label` names it in the failure message if it never arrives.
+    expect(label, pattern) {
+        this.expectations.push({ label, pattern, matched: false });
+    }
+
+    // Declared expectations that nothing matched, clearing the list so each
+    // test starts with none outstanding.
+    unmatchedExpectations() {
+        const out = this.expectations
+            .filter((e) => !e.matched)
+            .map((e) => e.label);
+        this.expectations = [];
+        return out;
+    }
+
+    record(kind, text) {
+        const line = kind + ": " + String(text).split("\n")[0];
+        if (isAllowed(line)) return;
+        const expected = this.expectations.find(
+            (e) => !e.matched && e.pattern.test(line),
+        );
+        if (expected) {
+            expected.matched = true;
+            return;
+        }
+        this.entries.push(line);
+    }
+
+    // Everything recorded since the previous take(). Never yields a
+    // record twice and never skips one.
+    take() {
+        const out = this.entries.slice(this.taken);
+        this.taken = this.entries.length;
+        return out;
+    }
+}
+
+function attachErrorListeners(ctx, errors) {
+    const attachPage = (page) => {
+        page.on("pageerror", (err) => {
+            errors.record("pageerror", err.message || String(err));
+        });
+        page.on("console", (msg) => {
+            if (msg.type() === "error") {
+                errors.record("console.error", msg.text());
+            }
+        });
+    };
+    ctx.pages().forEach(attachPage);
+    ctx.on("page", attachPage);
+    // Per-page listeners only: the context-level "weberror" event covers
+    // the same page exceptions and would double-report them. Playwright
+    // exposes no error EVENT for service workers, so an uncaught
+    // exception in the background worker is not visible here — everything
+    // this suite drives lives in the popup page. That is an error-channel
+    // gap only: worker NETWORK traffic is intercepted and reported like
+    // any other, and assertWorkerTrafficIntercepted() below fails the run
+    // if it ever stops being.
+}
+
+async function serviceWorker(ctx) {
+    const [existing] = ctx.serviceWorkers();
+    if (existing) return existing;
+    return ctx.waitForEvent("serviceworker", { timeout: 30000 });
+}
+
+// How long to wait for the background worker's first outbound request.
+//
+// The margin that actually decides whether this check is sound is not
+// this timeout — it is whether the route handler is installed before the
+// worker fetches. Measured over several runs: route installation
+// completes 11-23ms after the context comes up, and the worker's
+// blocklist fetch arrives 525-883ms after that, so the route wins by
+// roughly 25-50x. This 30s figure is only slack for a loaded machine on
+// top of that; losing the race fails the run rather than passing it
+// quietly, which was verified by forcing a 3s delay before route
+// installation.
+const WORKER_TRAFFIC_TIMEOUT_MS = 30000;
+
+// ctx.route() only sees service-worker requests when Playwright runs with
+// PW_EXPERIMENTAL_SERVICE_WORKER_NETWORK_EVENTS=1, which script/test-e2e
+// sets. Without it the worker's traffic — notably the phishing blocklist
+// fetch src/background/index.js issues at startup — goes to the real
+// internet, and nothing says so, because src/shared/phishingDomains.js
+// swallows fetch failures. A harness whose isolation can lapse in silence
+// is worthless, so this does not take the flag on trust: the background
+// worker's own startup fetch has to show up in the route handler, or the
+// suite refuses to run.
+//
+// Deliberately NOT a synthetic probe fetched through worker.evaluate():
+// evaluating in an extension worker this early kills it (the call fails
+// with "Target page, context or browser has been closed" and the worker
+// disappears), which would break the very thing being measured. Observing
+// traffic the extension already generates costs nothing and cannot
+// perturb it.
+async function assertWorkerTrafficIntercepted(stubs) {
+    const seen = await stubs.waitForServiceWorkerTraffic(
+        WORKER_TRAFFIC_TIMEOUT_MS,
+    );
+    if (seen) return seen;
+
+    // State the observation, not a conclusion. This fires for at least
+    // two quite different causes and the harness cannot tell them apart
+    // from here, so guessing one of them in the message sends the reader
+    // the wrong way.
+    throw new Error(
+        "observed no service-worker request in the route handler within " +
+            WORKER_TRAFFIC_TIMEOUT_MS +
+            "ms. Under working interception the background worker's " +
+            "startup blocklist fetch (src/background/index.js) reaches the " +
+            "handler about half a second after the route is installed. " +
+            "Two causes are plausible and this check cannot distinguish " +
+            "them: (1) service-worker interception is not in effect, so " +
+            "that traffic went to the real internet unobserved — the suite " +
+            "must be run through script/test-e2e, which sets " +
+            "PW_EXPERIMENTAL_SERVICE_WORKER_NETWORK_EVENTS=1, and a " +
+            "Playwright upgrade may have dropped or renamed that flag; " +
+            "(2) no worker request was made in the first place — the route " +
+            "lost the startup race, or the worker no longer fetches at " +
+            "startup, in which case this check needs a new anchor because " +
+            "there is no longer any worker traffic to observe. Either way " +
+            "the fix is a replacement mechanism or an honest downgrade of " +
+            "the isolation claims in tests/e2e/network.js and README.md — " +
+            "not deleting this check",
+    );
+}
+
+async function launch(routeOpts) {
+    if (!fs.existsSync(path.join(EXT_PATH, "manifest.json"))) {
+        throw new Error(
+            "no unpacked build at " +
+                EXT_PATH +
+                " — run make build before the e2e suite",
+        );
+    }
+
+    const userDir = fs.mkdtempSync(path.join(os.tmpdir(), "autistmask-e2e-"));
+    const ctx = await chromium.launchPersistentContext(userDir, {
+        // channel: "chromium" is load-bearing. The default headless mode
+        // uses the headless shell, which silently refuses to load
+        // extensions: there is no error at all, the service worker simply
+        // never appears. This cost real debugging time once already.
+        channel: "chromium",
+        headless: true,
+        args: [
+            "--disable-extensions-except=" + EXT_PATH,
+            "--load-extension=" + EXT_PATH,
+            // The container runs unprivileged; Chrome's sandbox needs
+            // capabilities the harness deliberately does not grant it.
+            "--no-sandbox",
+            // Belt to the interception braces: nothing that slips past
+            // the route handler can resolve a name, so a request that
+            // escapes cannot actually reach the internet. Detection is
+            // still assertWorkerTrafficIntercepted()'s job — this only
+            // bounds the damage while a gap goes unnoticed. Playwright
+            // fulfils routed requests without touching the resolver, and
+            // it drives the browser over a pipe, so neither is affected.
+            "--host-resolver-rules=MAP * ~NOTFOUND",
+        ],
+    });
+
+    const cleanup = async () => {
+        await ctx.close().catch(() => {});
+        fs.rmSync(userDir, { recursive: true, force: true });
+    };
+
+    try {
+        const errors = new ErrorCollector();
+        attachErrorListeners(ctx, errors);
+        routeOpts.report = (text) => errors.record("network", text);
+        const stubs = await installNetworkStubs(ctx, routeOpts);
+
+        await assertWorkerTrafficIntercepted(stubs);
+
+        // The extension id is derived from the unpacked path, so it
+        // changes and must never be hardcoded. It is the host part of the
+        // service worker URL.
+        const sw = await serviceWorker(ctx);
+        const id = new URL(sw.url()).host;
+
+        return {
+            ctx,
+            errors,
+            extensionId: id,
+            popupUrl: "chrome-extension://" + id + "/src/popup/index.html",
+            close: cleanup,
+        };
+    } catch (e) {
+        // Anything that fails after the browser is up has to tear it down
+        // on the way out: an orphaned context keeps node alive forever,
+        // turning a clean failure into a hung run.
+        await cleanup();
+        throw e;
+    }
+}
+
+// ---------------------------------------------------------------- flows
+
+const PASSWORD = "e2e-harness-password";
+
+async function visible(page, selector, timeout = 15000) {
+    await page.waitForSelector(selector, { state: "visible", timeout });
+}
+
+// An empty WebAssembly module: magic number and version header, no
+// sections. Compiling it in the popup asks the one question that decides
+// libsodium's backend — may this realm compile WebAssembly — of the real
+// page under the real shipped manifest, which is the only place the
+// answer can be observed. Kept independent of src/shared/vault.js on
+// purpose: a bundle asked to grade itself proves less than an outside
+// observation of the same realm.
+const EMPTY_WASM_MODULE = [0x00, 0x61, 0x73, 0x6d, 0x01, 0x00, 0x00, 0x00];
+
+async function pageCompilesWasm(page) {
+    return page.evaluate(async (bytes) => {
+        try {
+            await WebAssembly.compile(new Uint8Array(bytes));
+            return true;
+        } catch (_) {
+            return false;
+        }
+    }, EMPTY_WASM_MODULE);
+}
+
+async function openPopup(ctx, popupUrl) {
+    const page = await ctx.newPage();
+    await page.goto(popupUrl);
+    return page;
+}
+
+// Full wallet creation through the real UI: BIP-39 generation, libsodium
+// vault encryption and extension storage persistence, for real.
+//
+// Returns the recovery phrase it generated. Tests that assert on a secret
+// need the real value — checking for "some 12 words" would pass against the
+// wrong wallet's phrase, and checking for nothing at all would pass against
+// a screen that shows the phrase it was supposed to hide.
+async function createWallet(page) {
+    await page.click("#btn-welcome-add");
+    await visible(page, "#view-add-wallet");
+    await page.click("#btn-generate-phrase");
+    await page.waitForFunction(() => {
+        const el = document.getElementById("wallet-mnemonic");
+        return el && el.value.trim().split(/\s+/).length >= 12;
+    });
+    const phrase = (await page.inputValue("#wallet-mnemonic")).trim();
+    await page.fill("#add-wallet-password", PASSWORD);
+    await page.fill("#add-wallet-password-confirm", PASSWORD);
+    await page.click("#btn-add-wallet-confirm");
+    await visible(page, "#view-main", 60000);
+    return phrase;
+}
+
+// Reach the address detail screen of the FIRST address of the first wallet,
+// from wherever the popup restored to. Clicking .address-row does not open
+// it; the [info] button does.
+//
+// .first() rather than a bare selector because the suite adds a second
+// wallet partway through, and every later test would otherwise die in
+// Playwright's strict mode rather than on an assertion.
+async function openAddressDetail(page) {
+    const onAddress = await page.isVisible("#view-address");
+    if (!onAddress) {
+        await visible(page, "#view-main");
+        await page.locator("#wallet-list .btn-addr-info").first().click();
+    }
+    await visible(page, "#view-address");
+}
+
+module.exports = {
+    PASSWORD,
+    createWallet,
+    launch,
+    openAddressDetail,
+    openPopup,
+    pageCompilesWasm,
+    visible,
+};

tests/e2e/network.js

@@ -0,0 +1,507 @@
+// Browser-level network interception for the end-to-end suite.
+//
+// Every http(s) request the extension makes — from the popup page AND
+// from the MV3 background service worker — is fulfilled from these
+// fixtures, so the suite is deterministic and runs entirely offline. The
+// probe that motivated this harness (see issue #181) observed live calls
+// to Blockscout returning 401 inside the container, which would make any
+// assertion about rendered transaction data worthless.
+//
+// Service-worker coverage is not free: ctx.route() only sees worker
+// traffic when PW_EXPERIMENTAL_SERVICE_WORKER_NETWORK_EVENTS=1 is set in
+// the environment, which script/test-e2e does. Without it the phishing
+// blocklist fetch that src/background/index.js issues at worker startup
+// silently reaches raw.githubusercontent.com on the open internet, and
+// src/shared/phishingDomains.js swallows the failure so nothing surfaces
+// it. That is not left to trust: waitForServiceWorkerTraffic() below
+// backs the launch-time canary in harness.js, which fails the entire
+// suite if worker requests stop being visible here.
+//
+// Anything not explicitly stubbed here is aborted AND reported to the
+// error collector, so a newly added outbound call shows up as a test
+// failure rather than as intermittent flakiness.
+
+"use strict";
+
+// Fictional ERC-20 used to seed the transaction-detail test. The symbol
+// must not collide with any entry in src/shared/tokenList.js, or
+// isSpoofedSymbol() in src/shared/transactions.js drops the transfer as a
+// symbol-spoofing attempt; holders_count must be >= 1000 or the default
+// hideLowHolderTokens filter drops it. Either would make the test pass
+// vacuously by never rendering a row at all.
+const STUB_TOKEN = {
+    address: "0xe2e0000000000000000000000000000000000e2e",
+    symbol: "E2E",
+    name: "End To End Test Token",
+    decimals: "6",
+    holders: "12345",
+};
+
+const STUB_COUNTERPARTY = "0xc0ffee0000000000000000000000000000c0ffee";
+
+const STUB_TX_HASH =
+    "0xe2e0000000000000000000000000000000000000000000000000000000000e2e";
+
+const STUB_BLOCK_NUMBER = 21000000;
+
+// Fixed instant so timeAgo() output is stable across runs.
+const STUB_TX_TIMESTAMP = "2026-01-02T03:04:05.000000Z";
+
+// A 32-byte zero word. Returned for every eth_call, which is what makes
+// ethers' ENS reverse lookup resolve to "no resolver set" and return null
+// instead of throwing. A throw would be logged by src/shared/ens.js via
+// log.errorf(), i.e. console.error, which fails the run on its own.
+const ZERO_WORD = "0x" + "0".repeat(64);
+
+function hex(value) {
+    return "0x" + BigInt(value).toString(16);
+}
+
+// A bigint as a 32-byte ABI word.
+function word(value) {
+    return "0x" + BigInt(value).toString(16).padStart(64, "0");
+}
+
+// ------------------------------------------------------------ fee fixture
+//
+// The confirmation screen carries two different numbers for the same
+// transaction and may gate on only one of them:
+//
+//   reserve  = gasLimit * maxFeePerGas — what a node requires to be
+//              available for a type-2 transaction, and what the spend gate
+//              must use.
+//   estimate = gasLimit * gasPrice — what the transfer is expected to
+//              actually cost. Display only.
+//
+// Issue #154 was the gate reading the smaller of the two. ethers derives
+// maxFeePerGas as baseFeePerGas * 2 + maxPriorityFeePerGas, so the numbers
+// below put the reserve at very nearly twice the estimate. That gap is the
+// entire point of these values: it leaves room for a send that an
+// estimate-based gate accepts and a reserve-based gate refuses, which is
+// what lets the ConfirmTx tests tell the two apart at all. Collapse the gap
+// — by dropping baseFeePerGas from the block below, say — and those tests
+// go on passing while asserting nothing.
+const GAS_LIMIT = 21000n;
+const BASE_FEE_WEI = 100000000000n; // 100 gwei
+const PRIORITY_FEE_WEI = 1000000000n; // 1 gwei
+const GAS_PRICE_WEI = BASE_FEE_WEI + PRIORITY_FEE_WEI; // 101 gwei
+const MAX_FEE_WEI = BASE_FEE_WEI * 2n + PRIORITY_FEE_WEI; // 201 gwei
+
+const FEE_ESTIMATE_WEI = GAS_LIMIT * GAS_PRICE_WEI; // 0.002121 ETH
+const FEE_RESERVE_WEI = GAS_LIMIT * MAX_FEE_WEI; // 0.004221 ETH
+
+const RPC_RESULTS = {
+    eth_chainId: "0x1",
+    net_version: "1",
+    eth_blockNumber: "0x1406f40",
+    eth_getBalance: "0x0",
+    eth_call: ZERO_WORD,
+    eth_getCode: "0x",
+    eth_gasPrice: hex(GAS_PRICE_WEI),
+    eth_estimateGas: hex(GAS_LIMIT),
+    eth_getTransactionCount: "0x0",
+    eth_maxPriorityFeePerGas: hex(PRIORITY_FEE_WEI),
+};
+
+// The "latest" block, which ethers' getFeeData() reads baseFeePerGas from
+// to derive maxFeePerGas. Without it every fee is a legacy gasPrice, the
+// reserve and the estimate collapse to the same number, and the gate tests
+// stop being able to distinguish them.
+function latestBlock() {
+    return {
+        hash: "0x" + "11".repeat(32),
+        parentHash: "0x" + "22".repeat(32),
+        number: hex(STUB_BLOCK_NUMBER),
+        timestamp: hex(1767326645),
+        nonce: "0x0000000000000000",
+        difficulty: "0x0",
+        gasLimit: "0x1c9c380",
+        gasUsed: "0xf4240",
+        miner: STUB_COUNTERPARTY,
+        extraData: "0x",
+        baseFeePerGas: hex(BASE_FEE_WEI),
+        transactions: [],
+    };
+}
+
+// keccak("decimals()")[0:4].
+const SELECTOR_DECIMALS = "0x313ce567";
+
+// Every eth_call still answers with a zero word except decimals() on the
+// stub token. ethers reads that before it can encode an ERC-20 transfer,
+// and a zero there makes parseUnits() reject any fractional amount — so the
+// ERC-20 confirmation path would fail its gas estimate for a reason that
+// has nothing to do with what is being tested.
+function ethCallResult(req) {
+    const call = Array.isArray(req.params) ? req.params[0] : null;
+    if (!call || typeof call !== "object") return ZERO_WORD;
+    const data = String(call.data || call.input || "").toLowerCase();
+    const to = String(call.to || "").toLowerCase();
+    if (data.startsWith(SELECTOR_DECIMALS) && to === STUB_TOKEN.address) {
+        return word(STUB_TOKEN.decimals);
+    }
+    return ZERO_WORD;
+}
+
+function tokenObject() {
+    return {
+        address_hash: STUB_TOKEN.address,
+        address: STUB_TOKEN.address,
+        symbol: STUB_TOKEN.symbol,
+        name: STUB_TOKEN.name,
+        decimals: STUB_TOKEN.decimals,
+        holders_count: STUB_TOKEN.holders,
+        type: "ERC-20",
+    };
+}
+
+// One received ERC-20 transfer of 1.5 E2E to the address under test.
+function tokenTransferItems(address) {
+    return [
+        {
+            transaction_hash: STUB_TX_HASH,
+            block_number: STUB_BLOCK_NUMBER,
+            timestamp: STUB_TX_TIMESTAMP,
+            from: { hash: STUB_COUNTERPARTY },
+            to: { hash: address },
+            total: { decimals: STUB_TOKEN.decimals, value: "1500000" },
+            token: tokenObject(),
+        },
+    ];
+}
+
+// A holding of 1.5 E2E, in the shape src/shared/balances.js parses. Serving
+// this is what puts an ERC-20 in the send screen's token dropdown, which is
+// the only way the confirmation screen's ERC-20 path can be reached.
+function tokenBalanceItems() {
+    return [
+        {
+            value: "1500000",
+            token: tokenObject(),
+        },
+    ];
+}
+
+// Full details for STUB_TX_HASH. raw_input is "0x" so the calldata
+// decoder short-circuits; the on-chain detail fields still populate.
+function transactionDetails() {
+    return {
+        hash: STUB_TX_HASH,
+        block_number: STUB_BLOCK_NUMBER,
+        nonce: 7,
+        gas_used: "51000",
+        gas_price: "1000000000",
+        fee: { value: "51000000000000" },
+        raw_input: "0x",
+        status: "ok",
+    };
+}
+
+function jsonResponse(route, body) {
+    return route.fulfill({
+        status: 200,
+        contentType: "application/json",
+        body: JSON.stringify(body),
+    });
+}
+
+// Extract the address from a Blockscout /addresses/<addr>/... path.
+function blockscoutAddress(pathname) {
+    const m = pathname.match(/\/addresses\/(0x[0-9a-fA-F]{40})\//);
+    return m ? m[1] : null;
+}
+
+function sleep(ms) {
+    return new Promise((resolve) => setTimeout(resolve, ms));
+}
+
+// How long a deliberately held reply is allowed to stay held, and how often
+// the release flag is re-read while it is.
+const HOLD_POLL_MS = 25;
+const HOLD_MAX_MS = 30000;
+
+// Hold a gas estimate open for as long as the test asks.
+//
+// opts.holdGasEstimate is read here rather than captured, so a test flips it
+// on the same options object the route was registered with — the same
+// pattern as seedTokenTransfer. This is the only way to observe the
+// confirmation screen while its estimate is genuinely in flight; sampling
+// the screen and hoping to win a race against the network would assert
+// nothing on a slow machine.
+//
+// It never gives up quietly. A hold that outlives the bound is reported like
+// any other harness fault, because a "pending" state that stopped being
+// pending on its own is a green assertion about the wrong screen.
+async function awaitRelease(opts, report) {
+    const started = Date.now();
+    while (opts.holdGasEstimate) {
+        if (Date.now() - started > HOLD_MAX_MS) {
+            report(
+                "held gas estimate was never released after " +
+                    HOLD_MAX_MS +
+                    "ms",
+            );
+            return;
+        }
+        await sleep(HOLD_POLL_MS);
+    }
+}
+
+// One JSON-RPC reply. Methods whose answer depends on a fixture a test has
+// set, or on the call itself, are resolved here; every other method is a
+// constant in RPC_RESULTS.
+function rpcReply(req, opts, report) {
+    const envelope = { jsonrpc: "2.0", id: req.id };
+
+    if (req.method === "eth_getBalance") {
+        return Object.assign(envelope, {
+            result: opts.ethBalanceWei || RPC_RESULTS.eth_getBalance,
+        });
+    }
+    if (req.method === "eth_call") {
+        return Object.assign(envelope, { result: ethCallResult(req) });
+    }
+    if (req.method === "eth_getBlockByNumber") {
+        return Object.assign(envelope, { result: latestBlock() });
+    }
+    if (req.method === "eth_estimateGas" && opts.failGasEstimate) {
+        // A refusal the node itself would produce, not a transport error:
+        // this is the shape the confirmation screen has to turn into
+        // "Unable to estimate" rather than into a fee of zero.
+        return Object.assign(envelope, {
+            error: {
+                code: -32000,
+                message: "e2e fixture: gas required exceeds allowance",
+            },
+        });
+    }
+
+    const result = RPC_RESULTS[req.method];
+    if (result === undefined) {
+        report("unstubbed RPC method: " + req.method);
+        return Object.assign(envelope, {
+            error: { code: -32601, message: "unstubbed in e2e harness" },
+        });
+    }
+    return Object.assign(envelope, { result });
+}
+
+async function handleRpc(route, postData, opts, report) {
+    let payload;
+    try {
+        payload = JSON.parse(postData || "null");
+    } catch {
+        report("unstubbed RPC: unparseable body " + String(postData));
+        return route.abort();
+    }
+    // ethers batches by default, so the body may be an array.
+    const batch = Array.isArray(payload) ? payload : [payload];
+
+    // Anything that is not a JSON-RPC object, or a batch of them, is not
+    // RPC at all and must be reported like any other unrecognised
+    // outbound traffic rather than dereferenced. request.postData()
+    // returns null both for a bodyless POST and for a body Playwright
+    // cannot decode as UTF-8 (sendBeacon with a Blob, or any binary
+    // payload), so this is not an empty-string special case: it rejects
+    // every non-object payload, exactly as the catch above rejects every
+    // unparseable one.
+    if (
+        payload === null ||
+        typeof payload !== "object" ||
+        !batch.every((req) => req !== null && typeof req === "object")
+    ) {
+        report("unstubbed request: POST " + route.request().url());
+        return route.abort();
+    }
+    if (batch.some((req) => req.method === "eth_estimateGas")) {
+        await awaitRelease(opts, report);
+    }
+
+    const replies = batch.map((req) => rpcReply(req, opts, report));
+    return jsonResponse(route, Array.isArray(payload) ? replies : replies[0]);
+}
+
+const TRACE_TRUE = ["1", "true", "yes", "on"];
+const TRACE_FALSE = ["", "0", "false", "no", "off"];
+
+// Whether E2E_TRACE_NETWORK asks for the request trace.
+//
+// A set-but-unrecognised value is a hard error rather than a quiet
+// "off": E2E_TRACE_NETWORK=true asking for a trace and getting silence
+// is the operator being lied to about what the harness is doing, which
+// is the whole failure mode this suite exists to eliminate. Refusing to
+// guess costs one line and one obvious error message.
+function traceEnabled(raw) {
+    if (raw === undefined || raw === null) return false;
+    const v = String(raw).trim().toLowerCase();
+    if (TRACE_TRUE.includes(v)) return true;
+    if (TRACE_FALSE.includes(v)) return false;
+    throw new Error(
+        "E2E_TRACE_NETWORK is set to " +
+            JSON.stringify(String(raw)) +
+            ", which is not a recognised on/off value. Use one of " +
+            TRACE_TRUE.join(", ") +
+            " to enable the request trace, or one of " +
+            TRACE_FALSE.slice(1).join(", ") +
+            " to disable it. Refusing to guess: a diagnostic that silently " +
+            "does nothing is worse than one that is not there",
+    );
+}
+
+/**
+ * Route every http(s) request through local fixtures.
+ *
+ * @param {import("playwright-core").BrowserContext} ctx
+ * @param {object} opts
+ * @param {(text: string) => void} opts.report  called for unstubbed traffic
+ * @param {boolean} [opts.seedTokenTransfer]  serve the stubbed ERC-20
+ *   transfer. Read at request time, so a test can flip it on the same
+ *   options object without re-registering the route.
+ * @param {boolean} [opts.seedTokenBalance]  serve the stubbed ERC-20
+ *   holding, which is what makes the token reachable from the send screen.
+ * @param {string} [opts.ethBalanceWei]  hex wei answered to eth_getBalance;
+ *   defaults to zero, which is what every test that predates the funded
+ *   fixture expects.
+ * @param {boolean} [opts.failGasEstimate]  answer eth_estimateGas with a
+ *   node-side refusal.
+ * @param {boolean} [opts.holdGasEstimate]  hold every batch containing an
+ *   eth_estimateGas until this is cleared again.
+ * @returns {Promise<{waitForServiceWorkerTraffic: (ms: number) =>
+ *   Promise<string|null>}>}
+ */
+async function installNetworkStubs(ctx, opts) {
+    const report = opts.report;
+
+    // First request seen that originated in a service worker, and the
+    // resolver waiting for it. This is what proves worker interception is
+    // actually in force; see waitForServiceWorkerTraffic below.
+    let firstWorkerRequest = null;
+    let announceWorkerRequest = null;
+
+    // E2E_TRACE_NETWORK=1 prints every request that reaches this handler,
+    // tagged [sw] when it originated in the background service worker.
+    // It exists so the isolation claim above can be re-checked by anyone
+    // in one command, without editing files: the phishing blocklist fetch
+    // showing up with an [sw] tag is the proof that the worker really is
+    // intercepted and that the raw.githubusercontent.com stub below is
+    // live code rather than decoration.
+    const trace = traceEnabled(process.env.E2E_TRACE_NETWORK);
+
+    // Regex rather than a glob so chrome-extension:// resource loads are
+    // never touched — routing those would break the popup itself.
+    await ctx.route(/^https?:\/\//, async (route) => {
+        const req = route.request();
+        const url = new URL(req.url());
+        const p = url.pathname;
+        const fromWorker = !!req.serviceWorker();
+
+        if (fromWorker && !firstWorkerRequest) {
+            firstWorkerRequest = req.method() + " " + req.url();
+            if (announceWorkerRequest)
+                announceWorkerRequest(firstWorkerRequest);
+        }
+
+        if (trace) {
+            const origin = fromWorker ? "[sw] " : "[page] ";
+            console.log("# routed " + origin + req.method() + " " + req.url());
+        }
+
+        // JSON-RPC endpoint (any host): a POST with a JSON-RPC body.
+        if (req.method() === "POST") {
+            return handleRpc(route, req.postData(), opts, report);
+        }
+
+        // Blockscout v2
+        if (p.includes("/api/v2/")) {
+            if (/\/addresses\/0x[0-9a-fA-F]{40}\/transactions$/.test(p)) {
+                return jsonResponse(route, { items: [] });
+            }
+            if (/\/addresses\/0x[0-9a-fA-F]{40}\/token-transfers$/.test(p)) {
+                const addr = blockscoutAddress(p);
+                return jsonResponse(route, {
+                    items:
+                        opts.seedTokenTransfer && addr
+                            ? tokenTransferItems(addr)
+                            : [],
+                });
+            }
+            if (/\/addresses\/0x[0-9a-fA-F]{40}\/token-balances$/.test(p)) {
+                return jsonResponse(
+                    route,
+                    opts.seedTokenBalance ? tokenBalanceItems() : [],
+                );
+            }
+            if (p.endsWith("/transactions/" + STUB_TX_HASH)) {
+                return jsonResponse(route, transactionDetails());
+            }
+        }
+
+        // CoinDesk price tick
+        if (url.hostname.endsWith("coindesk.com")) {
+            return jsonResponse(route, { Data: {} });
+        }
+
+        // MetaMask phishing blocklist
+        if (
+            url.hostname === "raw.githubusercontent.com" ||
+            p.endsWith("/eth-phishing-detect/main/src/config.json")
+        ) {
+            return jsonResponse(route, {
+                version: 2,
+                tolerance: 2,
+                fuzzylist: [],
+                whitelist: [],
+                blacklist: [],
+            });
+        }
+
+        // Best-effort Etherscan address labels: served as an empty page.
+        if (url.hostname.endsWith("etherscan.io")) {
+            return route.fulfill({
+                status: 200,
+                contentType: "text/html",
+                body: "<html><body></body></html>",
+            });
+        }
+
+        report("unstubbed request: " + req.method() + " " + req.url());
+        return route.abort();
+    });
+
+    return {
+        /**
+         * Resolve with the first service-worker-originated request this
+         * handler saw, or null if none arrives within `ms`.
+         *
+         * The background worker fetches the phishing blocklist at
+         * startup, unconditionally, within about a second of the context
+         * coming up — so under working interception this resolves almost
+         * immediately. Nothing arriving means worker traffic is bypassing
+         * the handler entirely and going to the real internet, which the
+         * caller turns into a hard failure of the whole suite.
+         */
+        waitForServiceWorkerTraffic(ms) {
+            if (firstWorkerRequest) return Promise.resolve(firstWorkerRequest);
+            return new Promise((resolve) => {
+                const timer = setTimeout(() => {
+                    announceWorkerRequest = null;
+                    resolve(null);
+                }, ms);
+                announceWorkerRequest = (req) => {
+                    clearTimeout(timer);
+                    announceWorkerRequest = null;
+                    resolve(req);
+                };
+            });
+        },
+    };
+}
+
+module.exports = {
+    installNetworkStubs,
+    FEE_ESTIMATE_WEI,
+    FEE_RESERVE_WEI,
+    STUB_COUNTERPARTY,
+    STUB_TOKEN,
+    STUB_TX_HASH,
+};

tests/holders.test.js

@@ -0,0 +1,166 @@
+// Tests for src/shared/holders.js and the balance-list spam gate that reads
+// it (issue #230).
+//
+// The rule these pin down: an explorer that reports no holders_count has told
+// us nothing, and "nothing" must not be recorded as "zero holders".  Zero is
+// the strongest spam signal the wallet has, so handing it out for free turns
+// a missing field into a hidden asset.
+
+jest.mock("../src/shared/log", () => ({
+    log: {
+        debugf: () => {},
+        infof: () => {},
+        warnf: () => {},
+        errorf: () => {},
+    },
+    debugFetch: jest.fn(),
+    setRuntimeDebug: () => {},
+    isDebug: () => false,
+}));
+
+global.fetch = jest.fn(() => {
+    throw new Error("tests must not perform network requests");
+});
+global.chrome = { storage: { local: {} } };
+
+const {
+    LOW_HOLDER_THRESHOLD,
+    parseHoldersCount,
+    isLowHolderCount,
+} = require("../src/shared/holders");
+const { fetchTokenBalances } = require("../src/shared/balances");
+const { debugFetch } = require("../src/shared/log");
+
+const BLOCKSCOUT = "https://eth.blockscout.com/api/v2";
+const HOLDER = "0x66133e8ea0f5d1d612d2502a968757d1048c214a";
+const USDC_CONTRACT = "0xa0b86991c6218b36c1d19d4a2e9eb0ce3606eb48";
+const NOVEL_TOKEN = "0x1111111111111111111111111111111111111111";
+
+describe("parseHoldersCount", () => {
+    test("a reported count parses to that number", () => {
+        expect(parseHoldersCount("3500000")).toBe(3500000);
+        expect(parseHoldersCount(3500000)).toBe(3500000);
+    });
+
+    test('a reported "0" parses to 0, which is not null', () => {
+        expect(parseHoldersCount("0")).toBe(0);
+        expect(parseHoldersCount(0)).toBe(0);
+    });
+
+    test("an omitted, null or empty count is unknown", () => {
+        expect(parseHoldersCount(undefined)).toBeNull();
+        expect(parseHoldersCount(null)).toBeNull();
+        expect(parseHoldersCount("")).toBeNull();
+    });
+
+    test("an unparseable count is unknown rather than zero", () => {
+        expect(parseHoldersCount("many")).toBeNull();
+        expect(parseHoldersCount(NaN)).toBeNull();
+    });
+});
+
+describe("isLowHolderCount", () => {
+    test("the threshold is the documented 1,000 holders", () => {
+        expect(LOW_HOLDER_THRESHOLD).toBe(1000);
+    });
+
+    test("a reported count below the threshold is low", () => {
+        expect(isLowHolderCount(0)).toBe(true);
+        expect(isLowHolderCount(999)).toBe(true);
+    });
+
+    test("a reported count at or above the threshold is not low", () => {
+        expect(isLowHolderCount(1000)).toBe(false);
+        expect(isLowHolderCount(1001)).toBe(false);
+    });
+
+    test("an unknown count is not low", () => {
+        expect(isLowHolderCount(null)).toBe(false);
+        expect(isLowHolderCount(undefined)).toBe(false);
+    });
+});
+
+// fetchTokenBalances applies its own spam gate, which is not the low-holder
+// display filter: it has no setting behind it and decides what the balance
+// list contains at all.  It stays strict on an unknown count — see the
+// comment at the gate — but must stop recording that unknown as zero.
+describe("the balance-list spam gate", () => {
+    function respondWith(items) {
+        debugFetch.mockImplementation(async () => ({
+            ok: true,
+            status: 200,
+            statusText: "OK",
+            json: async () => items,
+        }));
+    }
+
+    function item(overrides = {}) {
+        const { token, ...rest } = overrides;
+        return {
+            value: "12500000",
+            ...rest,
+            token: {
+                type: "ERC-20",
+                address_hash: NOVEL_TOKEN,
+                symbol: "SPAMTKN",
+                name: "Spam Token",
+                decimals: "6",
+                holders_count: "50000",
+                ...token,
+            },
+        };
+    }
+
+    beforeEach(() => {
+        debugFetch.mockReset();
+    });
+
+    test("a token with plenty of reported holders is listed", async () => {
+        respondWith([item()]);
+        const balances = await fetchTokenBalances(HOLDER, BLOCKSCOUT, []);
+        expect(balances).toHaveLength(1);
+        expect(balances[0].holders).toBe(50000);
+    });
+
+    test("a token reporting zero holders is still excluded", async () => {
+        respondWith([item({ token: { holders_count: "0" } })]);
+        expect(await fetchTokenBalances(HOLDER, BLOCKSCOUT, [])).toEqual([]);
+    });
+
+    test("an unknown holder count does not admit an unvouched token", async () => {
+        respondWith([item({ token: { holders_count: null } })]);
+        expect(await fetchTokenBalances(HOLDER, BLOCKSCOUT, [])).toEqual([]);
+    });
+
+    // The path that reaches the send selector and the history filter: a token
+    // the user vouched for by tracking it is listed whatever the explorer
+    // says, and it must carry the unknown count through as null, not as the
+    // zero that would then hide it downstream.
+    test("a tracked token with an unknown count is listed with holders null", async () => {
+        respondWith([item({ token: { holders_count: undefined } })]);
+        const balances = await fetchTokenBalances(HOLDER, BLOCKSCOUT, [
+            { address: NOVEL_TOKEN.toUpperCase() },
+        ]);
+        expect(balances).toHaveLength(1);
+        expect(balances[0].holders).toBeNull();
+    });
+
+    test("a known-list token with an unknown count is listed with holders null", async () => {
+        respondWith([
+            item({
+                token: {
+                    address_hash: USDC_CONTRACT,
+                    symbol: "USDC",
+                    holders_count: null,
+                },
+            }),
+        ]);
+        const balances = await fetchTokenBalances(HOLDER, BLOCKSCOUT, []);
+        expect(balances).toHaveLength(1);
+        expect(balances[0].holders).toBeNull();
+    });
+
+    test("no test in this file performed a network request", () => {
+        expect(global.fetch).not.toHaveBeenCalled();
+    });
+});

tests/manifest.test.js

@@ -0,0 +1,105 @@
+// The shipped Content Security Policy, pinned in both directions.
+//
+// This is the anti-regression check for #182. libsodium decides its
+// backend by trying to compile WebAssembly and catching the failure, so a
+// CSP that refuses WASM demotes the vault to the wasm2js translation —
+// roughly 20x slower per Argon2id derivation — and says so only in a
+// console message nobody reads. Dropping 'wasm-unsafe-eval' from either
+// manifest therefore has to fail a check, not a log line.
+//
+// It is equally a check against loosening. 'wasm-unsafe-eval' is granted
+// deliberately and narrowly (see the backend note in src/shared/vault.js);
+// 'unsafe-eval', 'unsafe-inline' and any remote script source are not, and
+// an exact match on the token set is what keeps the next edit from
+// smuggling one in alongside.
+//
+// build.js copies these files to dist/<target>/manifest.json verbatim, so
+// what is asserted here is what ships.
+
+const fs = require("fs");
+const path = require("path");
+
+const MANIFEST_DIR = path.join(__dirname, "..", "manifest");
+
+const EXPECTED_SCRIPT_SRC = ["'self'", "'wasm-unsafe-eval'"];
+const EXPECTED_OBJECT_SRC = ["'self'"];
+
+const FORBIDDEN_SOURCES = [
+    "'unsafe-eval'",
+    "'unsafe-inline'",
+    "http:",
+    "https:",
+    "data:",
+    "blob:",
+    "*",
+];
+
+function readManifest(name) {
+    return JSON.parse(
+        fs.readFileSync(path.join(MANIFEST_DIR, name + ".json"), "utf8"),
+    );
+}
+
+// "script-src 'self'; object-src 'self'" -> { "script-src": ["'self'"], ... }
+function parseCsp(policy) {
+    const directives = {};
+    for (const part of policy.split(";")) {
+        const tokens = part.trim().split(/\s+/).filter(Boolean);
+        if (tokens.length === 0) continue;
+        directives[tokens[0]] = tokens.slice(1);
+    }
+    return directives;
+}
+
+function assertPolicy(policy) {
+    const directives = parseCsp(policy);
+    expect(Object.keys(directives).sort()).toEqual([
+        "object-src",
+        "script-src",
+    ]);
+    expect(directives["script-src"].slice().sort()).toEqual(
+        EXPECTED_SCRIPT_SRC,
+    );
+    expect(directives["object-src"].slice().sort()).toEqual(
+        EXPECTED_OBJECT_SRC,
+    );
+    for (const source of FORBIDDEN_SOURCES) {
+        expect(directives["script-src"]).not.toContain(source);
+        expect(directives["object-src"]).not.toContain(source);
+    }
+}
+
+describe("shipped Content Security Policy", () => {
+    // MV3 takes an object and applies extension_pages to the popup and the
+    // background service worker, which is where libsodium runs.
+    test("chrome MV3 allows WASM and nothing else beyond 'self'", () => {
+        const csp = readManifest("chrome").content_security_policy;
+        expect(typeof csp).toBe("object");
+        expect(Object.keys(csp)).toEqual(["extension_pages"]);
+        assertPolicy(csp.extension_pages);
+    });
+
+    // MV2 takes the policy as a bare string. Firefox does not require
+    // 'wasm-unsafe-eval' for MV2 today — enforcement is report-only and
+    // Bugzilla 1770909 is still open — so that token is future-proofing
+    // for when it lands, not a mandate, and it stays inside Firefox's MV2
+    // base-CSP ceiling. object-src 'self' is the load-bearing half: a
+    // Firefox before 106 rejects an MV2 policy string that omits
+    // object-src and falls back to its own default, discarding everything
+    // declared here. Same policy as Chrome, different manifest shape.
+    test("firefox MV2 allows WASM and nothing else beyond 'self'", () => {
+        const csp = readManifest("firefox").content_security_policy;
+        expect(typeof csp).toBe("string");
+        assertPolicy(csp);
+    });
+
+    // The two targets share one codebase and one crypto path; a policy
+    // that drifts apart between them means one of the two builds is
+    // running a backend nothing tests.
+    test("both targets ship the same policy", () => {
+        const chrome =
+            readManifest("chrome").content_security_policy.extension_pages;
+        const firefox = readManifest("firefox").content_security_policy;
+        expect(firefox).toBe(chrome);
+    });
+});

tests/phishingDomains.test.js

@@ -1,17 +1,24 @@
-// Provide a localStorage mock for Node.js test environment.
-// Must be set before requiring the module since it calls loadDeltaFromStorage()
-// at module load time.
-const localStorageStore = {};
-global.localStorage = {
-    getItem: (key) =>
-        Object.prototype.hasOwnProperty.call(localStorageStore, key)
-            ? localStorageStore[key]
-            : null,
-    setItem: (key, value) => {
-        localStorageStore[key] = String(value);
+// Extension storage stub for the Node test environment. The module resolves
+// the storage API on use, so this only has to exist before the first call.
+// Values round-trip through JSON the way structured cloning would, so a test
+// cannot pass by holding a live reference to the module's own array.
+const storageStore = {};
+global.chrome = {
+    storage: {
+        local: {
+            get: async (key) =>
+                Object.prototype.hasOwnProperty.call(storageStore, key)
+                    ? { [key]: JSON.parse(JSON.stringify(storageStore[key])) }
+                    : {},
+            set: async (items) => {
+                for (const [key, value] of Object.entries(items)) {
+                    storageStore[key] = JSON.parse(JSON.stringify(value));
+                }
+            },
+            remove: async (key) => {
+                delete storageStore[key];
+            },
         },
-    removeItem: (key) => {
-        delete localStorageStore[key];
     },
 };
 
@@ -21,19 +28,32 @@ const {
     getBlocklistSize,
     getDeltaSize,
     hostnameVariants,
+    DELTA_STORAGE_KEY,
     _reset,
     _getVendoredBlacklistSize,
     _getDeltaBlacklist,
 } = require("../src/shared/phishingDomains");
 
+function clearStorage() {
+    for (const key of Object.keys(storageStore)) {
+        delete storageStore[key];
+    }
+}
+
+// The MV3 service worker is torn down when idle and re-evaluated on the next
+// event, which wipes every module-level variable. Re-requiring the module with
+// the registry reset is exactly that: fresh in-memory state, same extension
+// storage underneath.
+function restartWorker() {
+    jest.resetModules();
+    return require("../src/shared/phishingDomains");
+}
+
 // Reset delta state before each test to avoid cross-test contamination.
 // Note: vendored sets are immutable and always present.
 beforeEach(() => {
     _reset();
-    // Clear localStorage mock between tests
-    for (const key of Object.keys(localStorageStore)) {
-        delete localStorageStore[key];
-    }
+    clearStorage();
 });
 
 describe("phishingDomains", () => {
@@ -169,15 +189,34 @@ describe("phishingDomains", () => {
         });
     });
 
-    describe("localStorage persistence", () => {
-        test("saveDeltaToStorage persists delta under 256KiB", () => {
-            loadConfig({
+    describe("extension storage persistence", () => {
+        test("delta is persisted to extension storage, not localStorage", async () => {
+            await loadConfig({
                 blacklist: ["persisted-scam-xyz.com"],
             });
-            const stored = localStorage.getItem("phishing-delta");
-            expect(stored).not.toBeNull();
-            const data = JSON.parse(stored);
-            expect(data.blacklist).toContain("persisted-scam-xyz.com");
+            const stored = storageStore[DELTA_STORAGE_KEY];
+            expect(stored).toBeDefined();
+            expect(stored.blacklist).toContain("persisted-scam-xyz.com");
+        });
+
+        test("the fetch timestamp is persisted alongside the delta", async () => {
+            const before = Date.now();
+            await loadConfig({ blacklist: ["timestamped-scam-xyz.com"] });
+            const stored = storageStore[DELTA_STORAGE_KEY];
+            expect(typeof stored.lastFetchTime).toBe("number");
+            expect(stored.lastFetchTime).toBeGreaterThanOrEqual(before);
+        });
+
+        test("an oversized delta is dropped entirely, timestamp included", async () => {
+            // A record above the 256 KiB cap is not worth keeping; the
+            // timestamp goes with it so the next start re-fetches rather than
+            // claiming freshness for a delta that was never stored.
+            const huge = [];
+            for (let i = 0; i < 20000; i++) {
+                huge.push(`oversize-scam-${i}-xyzxyzxyzxyzxyz.com`);
+            }
+            await loadConfig({ blacklist: huge });
+            expect(storageStore[DELTA_STORAGE_KEY]).toBeUndefined();
         });
 
         test("delta is cleared on _reset", () => {
@@ -203,3 +242,332 @@ describe("phishingDomains", () => {
         });
     });
 });
+
+describe("phishing list across a service worker restart", () => {
+    beforeEach(() => {
+        clearStorage();
+        jest.resetModules();
+    });
+
+    afterEach(() => {
+        delete global.fetch;
+    });
+
+    test("a revived worker restores the persisted delta without re-fetching", async () => {
+        const first = require("../src/shared/phishingDomains");
+        await first.loadConfig({ blacklist: ["restart-scam-xyz.com"] });
+
+        const revived = restartWorker();
+        // Nothing in memory yet — this is a brand new module instance.
+        expect(revived.getDeltaSize()).toBe(0);
+
+        global.fetch = jest.fn();
+        await revived.initPhishingList();
+
+        expect(global.fetch).not.toHaveBeenCalled();
+        expect(revived.getDeltaSize()).toBe(1);
+        expect(revived.isPhishingDomain("restart-scam-xyz.com")).toBe(true);
+    });
+
+    test("repeated wakes inside the cache window never re-fetch", async () => {
+        const first = require("../src/shared/phishingDomains");
+        await first.loadConfig({ blacklist: ["no-storm-scam-xyz.com"] });
+
+        global.fetch = jest.fn();
+        for (let i = 0; i < 5; i++) {
+            const revived = restartWorker();
+            await revived.initPhishingList();
+        }
+        expect(global.fetch).not.toHaveBeenCalled();
+    });
+
+    test("a persisted timestamp older than the TTL causes a fetch on startup", async () => {
+        const first = require("../src/shared/phishingDomains");
+        await first.loadConfig({ blacklist: ["stale-scam-xyz.com"] });
+
+        // Age the persisted record past the 24-hour TTL.
+        storageStore[first.DELTA_STORAGE_KEY].lastFetchTime =
+            Date.now() - first.CACHE_TTL_MS - 1000;
+
+        const revived = restartWorker();
+        global.fetch = jest.fn(async () => ({
+            ok: true,
+            json: async () => ({ blacklist: ["refreshed-scam-xyz.com"] }),
+        }));
+        await revived.initPhishingList();
+
+        expect(global.fetch).toHaveBeenCalledTimes(1);
+        expect(revived.isPhishingDomain("refreshed-scam-xyz.com")).toBe(true);
+        expect(revived.isPhishingDomain("stale-scam-xyz.com")).toBe(false);
+    });
+
+    test("a first start with nothing persisted fetches immediately", async () => {
+        const fresh = restartWorker();
+        global.fetch = jest.fn(async () => ({
+            ok: true,
+            json: async () => ({ blacklist: ["first-run-scam-xyz.com"] }),
+        }));
+        await fresh.initPhishingList();
+
+        expect(global.fetch).toHaveBeenCalledTimes(1);
+        expect(fresh.isPhishingDomain("first-run-scam-xyz.com")).toBe(true);
+    });
+
+    test("updatePhishingList honours the persisted timestamp on its own", async () => {
+        // The startup path calls updatePhishingList() directly, so it must
+        // load persisted state itself rather than relying on anything else
+        // having finished first.
+        const first = require("../src/shared/phishingDomains");
+        await first.loadConfig({ blacklist: ["alarm-tick-scam-xyz.com"] });
+
+        const revived = restartWorker();
+        global.fetch = jest.fn();
+        await revived.updatePhishingList();
+
+        expect(global.fetch).not.toHaveBeenCalled();
+        expect(revived.isPhishingDomain("alarm-tick-scam-xyz.com")).toBe(true);
+    });
+});
+
+// The alarm period alone must set the cadence. lastFetchTime is stamped when
+// the fetch completes, so it lands one fetch latency after the alarm that
+// caused it; a freshness guard timed to the alarm period therefore vetoes
+// every scheduled tick and halves the real refresh rate. These tests measure
+// the interval between fetches that actually happened.
+describe("phishing refresh steady-state cadence", () => {
+    const { PHISHING_REFRESH_PERIOD_MINUTES } = require("../src/shared/alarms");
+    const PERIOD_MS = PHISHING_REFRESH_PERIOD_MINUTES * 60 * 1000;
+
+    let clockSpy;
+    let now;
+
+    beforeEach(() => {
+        clearStorage();
+        jest.resetModules();
+        now = Date.UTC(2026, 0, 1, 0, 0, 0);
+        clockSpy = jest.spyOn(Date, "now").mockImplementation(() => now);
+    });
+
+    afterEach(() => {
+        clockSpy.mockRestore();
+        delete global.fetch;
+    });
+
+    function fetchStub(latencyMs, seen) {
+        return jest.fn(async () => {
+            seen.push(now);
+            // A network fetch takes time, and lastFetchTime is stamped after
+            // it, not when the alarm fired.
+            now += latencyMs;
+            return { ok: true, json: async () => ({ blacklist: [] }) };
+        });
+    }
+
+    test("ten alarm ticks produce ten fetches, one per period", async () => {
+        const fetchedAt = [];
+        global.fetch = fetchStub(5000, fetchedAt);
+
+        const startup = require("../src/shared/phishingDomains");
+        const T0 = now;
+        await startup.initPhishingList();
+        expect(fetchedAt).toEqual([T0]);
+
+        const TICKS = 10;
+        let tickAt = T0 + PERIOD_MS;
+        for (let i = 0; i < TICKS; i++) {
+            now = tickAt;
+            tickAt += PERIOD_MS;
+            // The browser wakes a terminated worker to deliver the alarm, so
+            // every tick starts from cold memory and the persisted record.
+            const revived = restartWorker();
+            await revived.refreshPhishingListOnSchedule();
+        }
+
+        expect(fetchedAt).toHaveLength(TICKS + 1);
+        const intervals = fetchedAt.slice(1).map((t, i) => t - fetchedAt[i]);
+        expect(intervals).toEqual(new Array(TICKS).fill(PERIOD_MS));
+    });
+
+    test("the scheduled tick fetches whatever the last fetch's latency was", async () => {
+        // The alarm fires one period after the previous alarm, which is
+        // `latency` short of one period since the fetch it caused completed.
+        for (const latency of [200, 1000, 5000]) {
+            clearStorage();
+            jest.resetModules();
+            storageStore[DELTA_STORAGE_KEY] = {
+                blacklist: [],
+                lastFetchTime: now - PERIOD_MS + latency,
+                lastAttemptTime: now - PERIOD_MS,
+            };
+            const mod = require("../src/shared/phishingDomains");
+            const fetchedAt = [];
+            global.fetch = fetchStub(latency, fetchedAt);
+
+            await mod.refreshPhishingListOnSchedule();
+            expect(fetchedAt).toHaveLength(1);
+        }
+    });
+
+    test("a worker wake inside the cache window still does not fetch", async () => {
+        // The TTL is not removed, only taken off the scheduled path. Chrome
+        // revives the worker every ~30 seconds and every revival runs the
+        // startup path, so the TTL still has to keep that off the network.
+        storageStore[DELTA_STORAGE_KEY] = {
+            blacklist: [],
+            lastFetchTime: now - PERIOD_MS + 5000,
+            lastAttemptTime: now - PERIOD_MS,
+        };
+        const mod = require("../src/shared/phishingDomains");
+        global.fetch = jest.fn();
+
+        await mod.initPhishingList();
+        expect(global.fetch).not.toHaveBeenCalled();
+    });
+});
+
+describe("phishing list timestamps that cannot be trusted", () => {
+    let clockSpy;
+    let now;
+
+    beforeEach(() => {
+        clearStorage();
+        jest.resetModules();
+        now = Date.UTC(2026, 0, 1, 0, 0, 0);
+        clockSpy = jest.spyOn(Date, "now").mockImplementation(() => now);
+    });
+
+    afterEach(() => {
+        clockSpy.mockRestore();
+        delete global.fetch;
+    });
+
+    function okFetch() {
+        return jest.fn(async () => ({
+            ok: true,
+            json: async () => ({ blacklist: ["recovered-scam-xyz.com"] }),
+        }));
+    }
+
+    // jest.resetModules() clears the call record of a jest.fn, and simulating
+    // a worker restart is exactly that call. Anything counted across restarts
+    // has to be counted outside the mock.
+    function countingFetch(counter, response) {
+        return async () => {
+            counter.calls++;
+            return response();
+        };
+    }
+
+    test("a lastFetchTime in the future is discarded rather than trusted", async () => {
+        // Clock skew or a restored profile backup writes one. Every guard
+        // measures `Date.now() - stamp` and only tests the lower bound, so a
+        // stamp a year ahead would suppress updates for a year, and now that
+        // the value is persisted it would outlive every worker.
+        storageStore[DELTA_STORAGE_KEY] = {
+            blacklist: ["poisoned-scam-xyz.com"],
+            lastFetchTime: now + 365 * 24 * 60 * 60 * 1000,
+            lastAttemptTime: 0,
+        };
+        const mod = require("../src/shared/phishingDomains");
+        global.fetch = okFetch();
+
+        await mod.initPhishingList();
+
+        expect(global.fetch).toHaveBeenCalledTimes(1);
+        expect(mod.isPhishingDomain("recovered-scam-xyz.com")).toBe(true);
+        // And the record it leaves behind is sane, so recovery is permanent.
+        expect(
+            storageStore[DELTA_STORAGE_KEY].lastFetchTime,
+        ).toBeLessThanOrEqual(now);
+    });
+
+    test("a lastAttemptTime in the future does not suppress the retry", async () => {
+        storageStore[DELTA_STORAGE_KEY] = {
+            lastAttemptTime: now + 365 * 24 * 60 * 60 * 1000,
+        };
+        const mod = require("../src/shared/phishingDomains");
+        global.fetch = okFetch();
+
+        await mod.initPhishingList();
+        expect(global.fetch).toHaveBeenCalledTimes(1);
+    });
+
+    test("an oversized delta does not re-download on every worker wake", async () => {
+        // The delta and its freshness claim are both dropped, which is right,
+        // but nothing then says a fetch just happened. Chrome cycles the
+        // worker roughly every 30 seconds idle, so without the attempt stamp
+        // this is a full blocklist download per wake, forever.
+        const huge = [];
+        for (let i = 0; i < 20000; i++) {
+            huge.push(`oversize-scam-${i}-xyzxyzxyzxyzxyz.com`);
+        }
+        const counter = { calls: 0 };
+        global.fetch = countingFetch(counter, () => ({
+            ok: true,
+            json: async () => ({ blacklist: huge }),
+        }));
+
+        for (let wake = 0; wake < 4; wake++) {
+            const revived = restartWorker();
+            await revived.initPhishingList();
+            now += 30 * 1000; // idle timeout, worker torn down and revived
+        }
+
+        expect(counter.calls).toBe(1);
+        expect(storageStore[DELTA_STORAGE_KEY].blacklist).toBeUndefined();
+        expect(typeof storageStore[DELTA_STORAGE_KEY].lastAttemptTime).toBe(
+            "number",
+        );
+    });
+
+    test("a failing fetch is not retried on every worker wake either", async () => {
+        const counter = { calls: 0 };
+        global.fetch = countingFetch(counter, () => ({
+            ok: false,
+            status: 503,
+        }));
+
+        for (let wake = 0; wake < 4; wake++) {
+            const revived = restartWorker();
+            await revived.initPhishingList();
+            now += 30 * 1000;
+        }
+
+        expect(counter.calls).toBe(1);
+    });
+
+    test("the retry floor expires, so a failure is not permanent", async () => {
+        const {
+            MIN_FETCH_ATTEMPT_INTERVAL_MS,
+        } = require("../src/shared/phishingDomains");
+        const counter = { calls: 0 };
+        global.fetch = countingFetch(counter, () => ({
+            ok: false,
+            status: 503,
+        }));
+
+        await restartWorker().initPhishingList();
+        expect(counter.calls).toBe(1);
+
+        // Still inside the floor: no retry.
+        now += MIN_FETCH_ATTEMPT_INTERVAL_MS - 1000;
+        await restartWorker().initPhishingList();
+        expect(counter.calls).toBe(1);
+
+        // Past it: the extension goes back to the network.
+        now += 2000;
+        await restartWorker().initPhishingList();
+        expect(counter.calls).toBe(2);
+    });
+
+    test("the scheduled tick ignores the retry floor", async () => {
+        // The alarm period is far above the floor, but the floor exists to
+        // throttle wakes, not the schedule.
+        storageStore[DELTA_STORAGE_KEY] = { lastAttemptTime: now - 1000 };
+        const mod = require("../src/shared/phishingDomains");
+        global.fetch = okFetch();
+
+        await mod.refreshPhishingListOnSchedule();
+        expect(global.fetch).toHaveBeenCalledTimes(1);
+    });
+});

tests/sendTokenSelect.test.js

@@ -0,0 +1,123 @@
+// Tests for the token filtering in the Send view's token selector
+// (src/popup/views/send.js).
+//
+// The selector decides which of the user's tokens can be spent at all, so
+// over-filtering here is worse than in the history list: the asset is not
+// merely hidden, it becomes unspendable through the UI.  Issue #230: an
+// explorer that omits holders_count was read as "zero holders" and the token
+// disappeared from this list.
+//
+// renderSendTokenSelect only ever touches getElementById, createElement,
+// innerHTML, value, textContent and appendChild, so a small stub document is
+// enough to drive it; the real DOM behaviour of the view is covered by
+// tests/e2e/run.js.
+
+globalThis.chrome = {
+    storage: { local: { get: async () => ({}), set: async () => {} } },
+};
+
+const { state } = require("../src/shared/state");
+const { renderSendTokenSelect } = require("../src/popup/views/send");
+
+const USDC_CONTRACT = "0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48";
+const NOVEL_TOKEN = "0x1111111111111111111111111111111111111111";
+
+let select;
+
+function installStubDocument() {
+    select = { innerHTML: "", children: [] };
+    select.appendChild = (child) => select.children.push(child);
+    globalThis.document = {
+        getElementById: (id) => (id === "send-token" ? select : null),
+        createElement: () => ({ value: "", textContent: "" }),
+    };
+}
+
+// The symbols offered for sending, excluding the hardcoded ETH option that
+// renderSendTokenSelect writes straight into innerHTML.
+function offeredTokens() {
+    return select.children.map((opt) => opt.value.toLowerCase());
+}
+
+function tokenBalance(overrides) {
+    return {
+        address: NOVEL_TOKEN,
+        symbol: "SPAMTKN",
+        decimals: 18,
+        balance: "12.5",
+        holders: 50000,
+        ...overrides,
+    };
+}
+
+function render(tokenBalances) {
+    installStubDocument();
+    renderSendTokenSelect({ address: "0x" + "a".repeat(40), tokenBalances });
+}
+
+beforeEach(() => {
+    state.fraudContracts = [];
+    state.hideLowHolderTokens = true;
+});
+
+describe("the low-holder rule in the send token selector", () => {
+    test("ETH is always offered", () => {
+        render([]);
+        expect(select.innerHTML).toBe('<option value="ETH">ETH</option>');
+        expect(offeredTokens()).toEqual([]);
+    });
+
+    test("a token with plenty of holders is offered", () => {
+        render([tokenBalance()]);
+        expect(offeredTokens()).toEqual([NOVEL_TOKEN]);
+    });
+
+    test("a token reporting zero holders is withheld", () => {
+        render([tokenBalance({ holders: 0 })]);
+        expect(offeredTokens()).toEqual([]);
+    });
+
+    test("boundary: 999 holders is withheld, 1000 is offered", () => {
+        render([tokenBalance({ holders: 999 })]);
+        expect(offeredTokens()).toEqual([]);
+        render([tokenBalance({ holders: 1000 })]);
+        expect(offeredTokens()).toEqual([NOVEL_TOKEN]);
+    });
+
+    // Issue #230: an unknown holder count must not read as zero.  A token the
+    // user demonstrably holds — it has a balance — cannot be made unspendable
+    // by a field the block explorer failed to report.
+    test("a token whose holder count is unknown is still offered", () => {
+        render([tokenBalance({ holders: null })]);
+        expect(offeredTokens()).toEqual([NOVEL_TOKEN]);
+    });
+
+    test("a token balance carrying no holders field at all is offered", () => {
+        const t = tokenBalance();
+        delete t.holders;
+        render([t]);
+        expect(offeredTokens()).toEqual([NOVEL_TOKEN]);
+    });
+
+    test("the rule is bypassed entirely when the setting is off", () => {
+        state.hideLowHolderTokens = false;
+        render([tokenBalance({ holders: 0 })]);
+        expect(offeredTokens()).toEqual([NOVEL_TOKEN]);
+    });
+});
+
+describe("the other send-selector rules are unaffected", () => {
+    test("a token spoofing a known symbol from a wrong address is withheld", () => {
+        render([
+            tokenBalance({ symbol: "USDC", holders: null }),
+            tokenBalance({ address: USDC_CONTRACT, symbol: "USDC" }),
+        ]);
+        expect(offeredTokens()).toEqual([USDC_CONTRACT.toLowerCase()]);
+    });
+
+    test("a blocklisted fraud contract is withheld even with an unknown count", () => {
+        state.fraudContracts = [NOVEL_TOKEN.toUpperCase()];
+        render([tokenBalance({ holders: null })]);
+        expect(offeredTokens()).toEqual([]);
+    });
+});

tests/settingsUtcTimestamps.test.js

@@ -0,0 +1,111 @@
+// Tests for the UTC Timestamps setting.
+//
+// The checkbox was moved out of the Token Spam Protection well and into the
+// Display well next to the theme selector.  It is wired by id through the $()
+// helper, so the move cannot break the handler — but nothing in the suite said
+// so.  These tests pin both halves down: the markup lives in Display and
+// nowhere else, and the value still round-trips through storage.
+
+const fs = require("fs");
+const path = require("path");
+
+const POPUP_HTML = fs.readFileSync(
+    path.join(__dirname, "..", "src", "popup", "index.html"),
+    "utf8",
+);
+
+// The body of one `<div class="bg-well ...">` well, selected by its heading.
+function wellWithHeading(html, heading) {
+    const headingIndex = html.indexOf(
+        '<h3 class="font-bold mb-1">' + heading + "</h3>",
+    );
+    expect(headingIndex).toBeGreaterThan(-1);
+    const start = html.lastIndexOf('<div class="bg-well', headingIndex);
+    const end = html.indexOf('<div class="bg-well', headingIndex);
+    return html.slice(start, end === -1 ? html.length : end);
+}
+
+describe("the UTC Timestamps checkbox placement", () => {
+    test("the checkbox appears exactly once in the popup markup", () => {
+        const matches = POPUP_HTML.match(/id="settings-utc-timestamps"/g);
+        expect(matches).toHaveLength(1);
+    });
+
+    test("it renders in the Display well, alongside the theme selector", () => {
+        const display = wellWithHeading(POPUP_HTML, "Display");
+
+        expect(display).toContain('id="settings-utc-timestamps"');
+        expect(display).toContain('id="settings-theme"');
+    });
+
+    test("it does not render in the Token Spam Protection well", () => {
+        const spam = wellWithHeading(POPUP_HTML, "Token Spam Protection");
+
+        expect(spam).not.toContain('id="settings-utc-timestamps"');
+        // The filters that do belong there are untouched.
+        expect(spam).toContain('id="settings-hide-low-holders"');
+        expect(spam).toContain('id="settings-hide-fraud-contracts"');
+        expect(spam).toContain('id="settings-hide-dust"');
+        expect(spam).toContain('id="settings-dust-threshold"');
+    });
+});
+
+describe("the UTC Timestamps setting round-trips through storage", () => {
+    let store;
+
+    function loadStateModule() {
+        store = {};
+        global.chrome = {
+            storage: {
+                local: {
+                    get: async (key) =>
+                        key in store ? { [key]: store[key] } : {},
+                    set: async (obj) => Object.assign(store, obj),
+                },
+            },
+        };
+        jest.resetModules();
+        return require("../src/shared/state");
+    }
+
+    afterEach(() => {
+        delete global.chrome;
+    });
+
+    test("defaults to off with nothing persisted", async () => {
+        const { state, loadState } = loadStateModule();
+
+        await loadState();
+
+        expect(state.utcTimestamps).toBe(false);
+    });
+
+    test("an enabled checkbox is persisted and read back", async () => {
+        const first = loadStateModule();
+
+        // What the change handler in views/settings.js does.
+        first.state.utcTimestamps = true;
+        await first.saveState();
+        expect(store.autistmask.utcTimestamps).toBe(true);
+
+        // A fresh popup load sees it.
+        jest.resetModules();
+        const second = require("../src/shared/state");
+        expect(second.state.utcTimestamps).toBe(false);
+        await second.loadState();
+        expect(second.state.utcTimestamps).toBe(true);
+    });
+
+    test("turning it back off is persisted too", async () => {
+        const { state, saveState, loadState } = loadStateModule();
+
+        state.utcTimestamps = true;
+        await saveState();
+        state.utcTimestamps = false;
+        await saveState();
+
+        state.utcTimestamps = true;
+        await loadState();
+        expect(state.utcTimestamps).toBe(false);
+    });
+});

tests/showPhrase.test.js

@@ -0,0 +1,94 @@
+// Tests for the recovery phrase display (issue #161).
+//
+// These cover the parts that do not need a DOM: which wallet types may be
+// offered the action at all, the exclusion of the screen from the set of
+// views the popup may reopen onto, and the absence of any path from this
+// module to the logger. The DOM behaviour it guards — nothing rendered
+// before the password is accepted, a wrong password revealing nothing, and
+// the wipe on leaving — is driven against the real popup in a real browser
+// by tests/e2e/run.js, which is where every other view behaviour is tested.
+
+const fs = require("fs");
+const path = require("path");
+
+const { walletHasRecoveryPhrase } = require("../src/shared/wallet");
+const { RESTORABLE_VIEWS } = require("../src/popup/restorableViews");
+
+const SHOW_PHRASE_VIEW = "show-phrase";
+
+// helpers.js pulls in state.js, which reads chrome.storage.local at load.
+function loadHelpers() {
+    globalThis.chrome = {
+        storage: { local: { get: async () => ({}), set: async () => {} } },
+    };
+    return require("../src/popup/views/helpers");
+}
+
+describe("which wallets have a recovery phrase", () => {
+    test("an HD wallet does", () => {
+        expect(walletHasRecoveryPhrase({ type: "hd" })).toBe(true);
+    });
+
+    // A key wallet holds a bare private key and an xprv wallet an extended
+    // private key. Neither can be turned back into words, so neither may be
+    // offered the action.
+    test("a key wallet does not", () => {
+        expect(walletHasRecoveryPhrase({ type: "key" })).toBe(false);
+    });
+
+    test("an xprv wallet does not", () => {
+        expect(walletHasRecoveryPhrase({ type: "xprv" })).toBe(false);
+    });
+
+    test("an unknown or missing wallet type does not", () => {
+        expect(walletHasRecoveryPhrase({ type: "something-new" })).toBe(false);
+        expect(walletHasRecoveryPhrase({})).toBe(false);
+        expect(walletHasRecoveryPhrase(undefined)).toBe(false);
+    });
+});
+
+describe("views the popup may reopen onto", () => {
+    // Restoring onto a secret screen would put the phrase on screen with no
+    // password prompt in front of it, on a popup the user may have reopened
+    // by accident.
+    test("the recovery phrase screen is not restorable", () => {
+        expect(RESTORABLE_VIEWS.has(SHOW_PHRASE_VIEW)).toBe(false);
+    });
+
+    test("the private key export screen is not restorable either", () => {
+        expect(RESTORABLE_VIEWS.has("export-privkey")).toBe(false);
+    });
+
+    test("the recovery phrase screen is still a registered view", () => {
+        const { VIEWS } = loadHelpers();
+        expect(VIEWS).toContain(SHOW_PHRASE_VIEW);
+    });
+
+    // Guards the other direction: a restorable name that is not a real view
+    // would leave restoreView() showing nothing at all.
+    test("every restorable view is a registered view", () => {
+        const { VIEWS } = loadHelpers();
+        for (const view of RESTORABLE_VIEWS) {
+            expect(VIEWS).toContain(view);
+        }
+    });
+});
+
+describe("the phrase cannot reach the logger", () => {
+    const source = fs.readFileSync(
+        path.join(__dirname, "..", "src", "popup", "views", "showPhrase.js"),
+        "utf8",
+    );
+
+    // The decrypted phrase only ever lives in a local and in the DOM node
+    // that displays it. The module has no logger to hand it to, and this
+    // pins that: src/shared/log.js writes to the console, and a console
+    // record of a recovery phrase outlives the popup.
+    test("the view does not import src/shared/log.js", () => {
+        expect(source).not.toMatch(/require\(["'][^"']*shared\/log["']\)/);
+    });
+
+    test("the view calls no logger method", () => {
+        expect(source).not.toMatch(/\blog\.(debugf|infof|warnf|errorf)\b/);
+    });
+});

tests/state.test.js

@@ -0,0 +1,161 @@
+const ADDRESS = "0x66133E8ea0f5D1d612D2502a968757D1048c214a";
+
+function oneWallet() {
+    return [{ name: "Wallet 1", type: "hd", addresses: [ADDRESS] }];
+}
+
+// state.js resolves the storage API at require time, so the stub has to exist
+// before the module is loaded, and the module registry has to be reset between
+// cases because `state` is a module-level singleton.
+function loadModuleWith(persisted) {
+    jest.resetModules();
+    const set = jest.fn(async () => {});
+    global.chrome = {
+        storage: {
+            local: {
+                get: jest.fn(async () =>
+                    persisted ? { autistmask: persisted } : {},
+                ),
+                set,
+            },
+        },
+    };
+    return { mod: require("../src/shared/state"), set };
+}
+
+afterEach(() => {
+    delete global.chrome;
+});
+
+describe("loadState hasWallet reconciliation", () => {
+    // A profile that deleted its last wallet on a build predating the write
+    // path fix keeps hasWallet: true forever. It must load as no wallet, which
+    // is what sends the popup to the welcome view.
+    test("stored hasWallet true with zero wallets loads as no wallet", async () => {
+        const { mod } = loadModuleWith({ hasWallet: true, wallets: [] });
+        await mod.loadState();
+        expect(mod.state.hasWallet).toBe(false);
+    });
+
+    test("stored hasWallet true with a missing wallets key loads as no wallet", async () => {
+        const { mod } = loadModuleWith({ hasWallet: true });
+        await mod.loadState();
+        expect(mod.state.wallets).toEqual([]);
+        expect(mod.state.hasWallet).toBe(false);
+    });
+
+    test("stored hasWallet false with one wallet loads as having a wallet", async () => {
+        const { mod } = loadModuleWith({
+            hasWallet: false,
+            wallets: oneWallet(),
+        });
+        await mod.loadState();
+        expect(mod.state.hasWallet).toBe(true);
+    });
+
+    test("absent hasWallet with wallets present loads as having a wallet", async () => {
+        const { mod } = loadModuleWith({ wallets: oneWallet() });
+        await mod.loadState();
+        expect(mod.state.hasWallet).toBe(true);
+    });
+
+    test("consistent stored states are preserved", async () => {
+        const withWallet = loadModuleWith({
+            hasWallet: true,
+            wallets: oneWallet(),
+        });
+        await withWallet.mod.loadState();
+        expect(withWallet.mod.state.hasWallet).toBe(true);
+
+        const without = loadModuleWith({ hasWallet: false, wallets: [] });
+        await without.mod.loadState();
+        expect(without.mod.state.hasWallet).toBe(false);
+    });
+
+    test("empty storage leaves the default no-wallet state", async () => {
+        const { mod } = loadModuleWith(null);
+        await mod.loadState();
+        expect(mod.state.hasWallet).toBe(false);
+        expect(mod.state.wallets).toEqual([]);
+    });
+
+    // The correction is derived on every load rather than written back, so a
+    // load never has a storage side effect.
+    test("loadState does not write to storage", async () => {
+        const { mod, set } = loadModuleWith({ hasWallet: true, wallets: [] });
+        await mod.loadState();
+        expect(set).not.toHaveBeenCalled();
+    });
+
+    // Deriving must not disturb the rest of the load.
+    test("other persisted fields still load", async () => {
+        const { mod } = loadModuleWith({
+            hasWallet: false,
+            wallets: oneWallet(),
+            networkId: "sepolia",
+            theme: "dark",
+            activeAddress: ADDRESS,
+        });
+        await mod.loadState();
+        expect(mod.state.networkId).toBe("sepolia");
+        expect(mod.state.theme).toBe("dark");
+        expect(mod.state.activeAddress).toBe(ADDRESS);
+    });
+});
+
+// The known-symbol spoof filter is a safety filter, so an existing profile
+// stored before the setting existed must load with it on rather than with
+// undefined, which would read as off.
+describe("hideSpoofedSymbols persistence", () => {
+    test("defaults to on with empty storage", async () => {
+        const { mod } = loadModuleWith(null);
+        await mod.loadState();
+        expect(mod.state.hideSpoofedSymbols).toBe(true);
+    });
+
+    test("a profile stored without the key loads with it on", async () => {
+        const { mod } = loadModuleWith({ wallets: oneWallet() });
+        await mod.loadState();
+        expect(mod.state.hideSpoofedSymbols).toBe(true);
+    });
+
+    test("an explicit false survives the load", async () => {
+        const { mod } = loadModuleWith({
+            wallets: oneWallet(),
+            hideSpoofedSymbols: false,
+        });
+        await mod.loadState();
+        expect(mod.state.hideSpoofedSymbols).toBe(false);
+    });
+
+    test("saveState persists the flag", async () => {
+        const { mod, set } = loadModuleWith(null);
+        mod.state.hideSpoofedSymbols = false;
+        await mod.saveState();
+        expect(set).toHaveBeenCalledWith({
+            autistmask: expect.objectContaining({ hideSpoofedSymbols: false }),
+        });
+    });
+
+    test("the flag round-trips off through save and load", async () => {
+        const first = loadModuleWith(null);
+        first.mod.state.hideSpoofedSymbols = false;
+        await first.mod.saveState();
+        const persisted = first.set.mock.calls[0][0].autistmask;
+
+        const second = loadModuleWith(persisted);
+        await second.mod.loadState();
+        expect(second.mod.state.hideSpoofedSymbols).toBe(false);
+    });
+
+    test("the flag round-trips back on through save and load", async () => {
+        const first = loadModuleWith(null);
+        first.mod.state.hideSpoofedSymbols = true;
+        await first.mod.saveState();
+        const persisted = first.set.mock.calls[0][0].autistmask;
+
+        const second = loadModuleWith(persisted);
+        await second.mod.loadState();
+        expect(second.mod.state.hideSpoofedSymbols).toBe(true);
+    });
+});

tests/txValidation.test.js

@@ -0,0 +1,357 @@
+const { parseEther } = require("ethers");
+const {
+    CODES,
+    FEE_PENDING,
+    FEE_KNOWN,
+    FEE_UNAVAILABLE,
+    feeReserveWei,
+    feeEstimateWei,
+    toFixedPoint,
+    validateTransfer,
+} = require("../src/shared/txValidation");
+
+// A plausible mainnet fee: 21000 gas at 20 gwei.
+const FEE = 21000n * 20000000000n; // 0.00042 ETH
+
+const GWEI = 1000000000n;
+const GAS_LIMIT = 21000n;
+
+describe("toFixedPoint", () => {
+    test("scales human decimals to 18 places", () => {
+        expect(toFixedPoint("1.5")).toBe(parseEther("1.5"));
+        expect(toFixedPoint("0")).toBe(0n);
+    });
+
+    test("rejects values it cannot represent exactly", () => {
+        expect(toFixedPoint("not a number")).toBe(null);
+        expect(toFixedPoint("")).toBe(null);
+        expect(toFixedPoint(null)).toBe(null);
+        // More precision than 18 decimals can hold.
+        expect(toFixedPoint("0.0000000000000000001")).toBe(null);
+    });
+});
+
+describe("validateTransfer, native ETH", () => {
+    const eth = (over) => ({
+        isErc20: false,
+        amount: "0.5",
+        ethBalance: "1.0",
+        feeStatus: FEE_KNOWN,
+        feeWei: FEE,
+        ...over,
+    });
+
+    test("allows a send comfortably within balance", () => {
+        const r = validateTransfer(eth());
+        expect(r).toEqual({ canSend: true, codes: [] });
+    });
+
+    test("blocks a send whose amount plus fee exceeds the balance", () => {
+        // The whole balance: passes an amount-only check, fails once the fee
+        // is counted. This is the bug this module exists to prevent.
+        const r = validateTransfer(eth({ amount: "1.0", ethBalance: "1.0" }));
+        expect(r.canSend).toBe(false);
+        expect(r.codes).toEqual([CODES.INSUFFICIENT_ETH_WITH_FEE]);
+    });
+
+    test("blocks a send left short by less than one fee", () => {
+        const balance = "1.0";
+        // One wei less headroom than the fee needs.
+        const amount = "0.99958000000000001"; // 1.0 - 0.00042 + 1e-17
+        const r = validateTransfer(eth({ amount, ethBalance: balance }));
+        expect(r.codes).toEqual([CODES.INSUFFICIENT_ETH_WITH_FEE]);
+    });
+
+    test("allows a send that leaves exactly the fee behind", () => {
+        const r = validateTransfer(
+            eth({ amount: "0.99958", ethBalance: "1.0" }),
+        );
+        expect(r).toEqual({ canSend: true, codes: [] });
+    });
+
+    test("reports plain insufficient balance when the amount alone is too big", () => {
+        const r = validateTransfer(eth({ amount: "2.0", ethBalance: "1.0" }));
+        expect(r.codes).toEqual([CODES.INSUFFICIENT_ETH]);
+    });
+
+    test("blocks while the fee estimate is still pending", () => {
+        const r = validateTransfer(
+            eth({ feeStatus: FEE_PENDING, feeWei: null }),
+        );
+        expect(r.canSend).toBe(false);
+        expect(r.codes).toEqual([CODES.FEE_PENDING]);
+    });
+
+    test("blocks when the fee estimate failed, without assuming zero", () => {
+        const r = validateTransfer(
+            eth({
+                amount: "1.0",
+                ethBalance: "1.0",
+                feeStatus: FEE_UNAVAILABLE,
+                feeWei: null,
+            }),
+        );
+        expect(r.canSend).toBe(false);
+        expect(r.codes).toEqual([CODES.FEE_UNAVAILABLE]);
+        // A zero fee would have let this exact transfer through.
+        expect(
+            validateTransfer(
+                eth({ amount: "1.0", ethBalance: "1.0", feeWei: 0n }),
+            ).canSend,
+        ).toBe(true);
+    });
+
+    test("still reports an over-balance amount before the estimate lands", () => {
+        const r = validateTransfer(
+            eth({
+                amount: "2.0",
+                ethBalance: "1.0",
+                feeStatus: FEE_PENDING,
+                feeWei: null,
+            }),
+        );
+        expect(r.codes).toEqual([CODES.INSUFFICIENT_ETH, CODES.FEE_PENDING]);
+    });
+
+    test("rejects an amount it cannot do exact arithmetic on", () => {
+        const r = validateTransfer(eth({ amount: "abc" }));
+        expect(r.canSend).toBe(false);
+        expect(r.codes).toEqual([CODES.AMOUNT_INVALID]);
+    });
+
+    test("rejects a negative amount", () => {
+        // A negative amount parses to a perfectly good bigint, so neither
+        // balance comparison can fire: both are trivially false against it.
+        // Left unblocked it clears the screen and then dies at encode time.
+        const r = validateTransfer(
+            eth({ amount: "-1", ethBalance: "1.0", feeWei: 861000000000000n }),
+        );
+        expect(r).toEqual({ canSend: false, codes: [CODES.AMOUNT_INVALID] });
+        expect(
+            validateTransfer(eth({ amount: "-0.000000000000000001" })),
+        ).toEqual({ canSend: false, codes: [CODES.AMOUNT_INVALID] });
+    });
+
+    test("treats a missing balance as zero, not as unlimited", () => {
+        const r = validateTransfer(eth({ ethBalance: undefined }));
+        expect(r.codes).toEqual([CODES.INSUFFICIENT_ETH]);
+    });
+});
+
+describe("validateTransfer, ERC-20", () => {
+    const erc20 = (over) => ({
+        isErc20: true,
+        amount: "100.0",
+        tokenBalance: "250.0",
+        ethBalance: "1.0",
+        feeStatus: FEE_KNOWN,
+        feeWei: FEE,
+        ...over,
+    });
+
+    test("allows a transfer with tokens to spend and ETH for the fee", () => {
+        expect(validateTransfer(erc20())).toEqual({ canSend: true, codes: [] });
+    });
+
+    test("checks the token amount against the token balance", () => {
+        const r = validateTransfer(erc20({ amount: "250.000001" }));
+        expect(r.codes).toEqual([CODES.INSUFFICIENT_TOKEN]);
+    });
+
+    test("does not charge the fee against the token balance", () => {
+        // The full token balance is sendable: the fee is paid in ETH.
+        expect(validateTransfer(erc20({ amount: "250.0" })).canSend).toBe(true);
+    });
+
+    test("blocks when the ETH balance does not cover the fee", () => {
+        const r = validateTransfer(erc20({ ethBalance: "0.0001" }));
+        expect(r.canSend).toBe(false);
+        expect(r.codes).toEqual([CODES.INSUFFICIENT_ETH_FOR_FEE]);
+    });
+
+    test("allows a fee exactly equal to the ETH balance", () => {
+        const r = validateTransfer(erc20({ ethBalance: "0.00042" }));
+        expect(r).toEqual({ canSend: true, codes: [] });
+    });
+
+    test("reports both shortfalls when tokens and ETH are both short", () => {
+        const r = validateTransfer(
+            erc20({ amount: "300.0", ethBalance: "0.0" }),
+        );
+        expect(r.codes).toEqual([
+            CODES.INSUFFICIENT_TOKEN,
+            CODES.INSUFFICIENT_ETH_FOR_FEE,
+        ]);
+    });
+
+    test("blocks while the fee estimate is pending or failed", () => {
+        expect(
+            validateTransfer(erc20({ feeStatus: FEE_PENDING, feeWei: null }))
+                .codes,
+        ).toEqual([CODES.FEE_PENDING]);
+        expect(
+            validateTransfer(
+                erc20({ feeStatus: FEE_UNAVAILABLE, feeWei: null }),
+            ).codes,
+        ).toEqual([CODES.FEE_UNAVAILABLE]);
+    });
+
+    test("rejects a negative token amount", () => {
+        const r = validateTransfer(
+            erc20({ amount: "-0.5", feeWei: 861000000000000n }),
+        );
+        expect(r).toEqual({ canSend: false, codes: [CODES.AMOUNT_INVALID] });
+    });
+
+    test("treats a missing token balance as zero", () => {
+        const r = validateTransfer(erc20({ tokenBalance: undefined }));
+        expect(r.codes).toEqual([CODES.INSUFFICIENT_TOKEN]);
+    });
+});
+
+// The reserve a node requires, not the fee the transaction is expected to
+// actually cost. An unpinned send goes out as type-2, and the node checks it
+// against maxFeePerGas; reserving gasPrice lets a transaction the node will
+// reject pass the gate.
+describe("feeReserveWei", () => {
+    // baseFee 20 gwei, tip 1 gwei: eth_gasPrice reports ~21 gwei, while
+    // ethers populates maxFeePerGas as baseFee * 2 + tip = 41 gwei.
+    const type2 = {
+        gasPrice: 21n * GWEI,
+        maxFeePerGas: 41n * GWEI,
+        maxPriorityFeePerGas: 1n * GWEI,
+    };
+
+    test("reserves gasLimit * maxFeePerGas, not gasLimit * gasPrice", () => {
+        expect(feeReserveWei(GAS_LIMIT, type2)).toBe(GAS_LIMIT * 41n * GWEI);
+        expect(feeReserveWei(GAS_LIMIT, type2)).toBe(861000000000000n);
+        // The number the node would not have accepted.
+        expect(feeReserveWei(GAS_LIMIT, type2)).not.toBe(441000000000000n);
+    });
+
+    test("gates out a send the type-2 reserve cannot fund", () => {
+        // Exactly fundable against a gasPrice reserve (0.999559 + 0.000441 is
+        // the whole balance to the wei), and short against the reserve the
+        // node will actually require.
+        const send = {
+            isErc20: false,
+            amount: "0.999559",
+            ethBalance: "1.0",
+            feeStatus: FEE_KNOWN,
+        };
+        expect(
+            validateTransfer({
+                ...send,
+                feeWei: GAS_LIMIT * type2.gasPrice,
+            }).canSend,
+        ).toBe(true);
+        const r = validateTransfer({
+            ...send,
+            feeWei: feeReserveWei(GAS_LIMIT, type2),
+        });
+        expect(r.canSend).toBe(false);
+        expect(r.codes).toEqual([CODES.INSUFFICIENT_ETH_WITH_FEE]);
+    });
+
+    test("falls back to gasPrice on a network with no type-2 pricing", () => {
+        const legacy = { gasPrice: 21n * GWEI, maxFeePerGas: null };
+        expect(feeReserveWei(GAS_LIMIT, legacy)).toBe(GAS_LIMIT * 21n * GWEI);
+    });
+
+    test("returns null when no usable price or gas limit is available", () => {
+        expect(feeReserveWei(GAS_LIMIT, { gasPrice: null })).toBe(null);
+        expect(feeReserveWei(GAS_LIMIT, {})).toBe(null);
+        expect(feeReserveWei(GAS_LIMIT, null)).toBe(null);
+        expect(feeReserveWei(21000, type2)).toBe(null);
+    });
+});
+
+// The display counterpart of the reserve: what the transaction is expected to
+// cost. Shown alongside the reserve so the screen neither contradicts the gate
+// nor quotes the user roughly double what they will pay.
+describe("feeEstimateWei", () => {
+    const type2 = {
+        gasPrice: 21n * GWEI,
+        maxFeePerGas: 41n * GWEI,
+        maxPriorityFeePerGas: 1n * GWEI,
+    };
+
+    test("estimates gasLimit * gasPrice, below the reserve", () => {
+        expect(feeEstimateWei(GAS_LIMIT, type2)).toBe(441000000000000n);
+        expect(feeReserveWei(GAS_LIMIT, type2)).toBe(861000000000000n);
+        expect(feeEstimateWei(GAS_LIMIT, type2)).toBeLessThan(
+            feeReserveWei(GAS_LIMIT, type2),
+        );
+    });
+
+    test("equals the reserve when the network has no type-2 pricing", () => {
+        const legacy = { gasPrice: 21n * GWEI, maxFeePerGas: null };
+        expect(feeEstimateWei(GAS_LIMIT, legacy)).toBe(
+            feeReserveWei(GAS_LIMIT, legacy),
+        );
+    });
+
+    test("falls back to maxFeePerGas when there is no gasPrice", () => {
+        const noLegacy = { gasPrice: null, maxFeePerGas: 41n * GWEI };
+        expect(feeEstimateWei(GAS_LIMIT, noLegacy)).toBe(
+            feeReserveWei(GAS_LIMIT, noLegacy),
+        );
+    });
+
+    test("returns null on the same unusable inputs as the reserve", () => {
+        expect(feeEstimateWei(GAS_LIMIT, {})).toBe(null);
+        expect(feeEstimateWei(GAS_LIMIT, null)).toBe(null);
+        expect(feeEstimateWei(GAS_LIMIT, { gasPrice: -1n })).toBe(null);
+        expect(feeEstimateWei(21000, type2)).toBe(null);
+    });
+});
+
+// Everything that is not a usable fee blocks exactly as FEE_UNAVAILABLE does.
+// Each of these previously returned { canSend: true, codes: [] } — counting no
+// fee at all, on a full-balance send, in the direction that lets money out.
+describe("validateTransfer, unusable fee input fails closed", () => {
+    const fullBalanceSend = (over) => ({
+        isErc20: false,
+        amount: "1.0",
+        ethBalance: "1.0",
+        ...over,
+    });
+
+    test("blocks a null fee claiming to be known", () => {
+        const r = validateTransfer(
+            fullBalanceSend({ feeStatus: FEE_KNOWN, feeWei: null }),
+        );
+        expect(r).toEqual({ canSend: false, codes: [CODES.FEE_UNAVAILABLE] });
+    });
+
+    test("blocks a known fee that is a number rather than a bigint", () => {
+        const r = validateTransfer(
+            fullBalanceSend({ feeStatus: FEE_KNOWN, feeWei: 420000000000000 }),
+        );
+        expect(r).toEqual({ canSend: false, codes: [CODES.FEE_UNAVAILABLE] });
+    });
+
+    test("blocks an unrecognised fee status", () => {
+        const r = validateTransfer(fullBalanceSend({ feeStatus: "bogus" }));
+        expect(r).toEqual({ canSend: false, codes: [CODES.FEE_UNAVAILABLE] });
+    });
+
+    test("blocks a negative fee", () => {
+        const r = validateTransfer(
+            fullBalanceSend({ feeStatus: FEE_KNOWN, feeWei: -1n }),
+        );
+        expect(r).toEqual({ canSend: false, codes: [CODES.FEE_UNAVAILABLE] });
+    });
+
+    test("blocks an ERC-20 transfer on an unusable fee too", () => {
+        const r = validateTransfer({
+            isErc20: true,
+            amount: "100.0",
+            tokenBalance: "250.0",
+            ethBalance: "1.0",
+            feeStatus: FEE_KNOWN,
+            feeWei: null,
+        });
+        expect(r).toEqual({ canSend: false, codes: [CODES.FEE_UNAVAILABLE] });
+    });
+});

tests/vault.test.js

@@ -0,0 +1,346 @@
+// Tests for src/shared/vault.js: the Argon2id + XSalsa20-Poly1305 encryption
+// that protects recovery phrases and private keys at rest.
+//
+// The properties that matter here are the ones whose failure is silent. A
+// vault that decrypts under the wrong password, that hands back plaintext from
+// a ciphertext an attacker edited, that reuses a nonce, or that leaves the
+// recovery phrase readable somewhere in the stored blob all look exactly like
+// a working vault from the UI. So each test below asserts a negative: the
+// thing that must not happen.
+//
+// Cost: every encrypt and decrypt runs one Argon2id pwhash at the production
+// interactive parameters, which the module hardcodes. The parameters are not
+// weakened or overridden anywhere in this file — they are pinned by the "key
+// derivation cost" tests, since they are the vault's only defence against an
+// offline attack on a stolen blob. The suite is kept inside script/test's
+// 30-second budget by sharing one encrypted fixture across the tamper cases
+// instead of re-encrypting per test.
+
+const sodium = require("libsodium-wrappers-sumo");
+const {
+    encryptWithPassword,
+    decryptWithPassword,
+} = require("../src/shared/vault");
+
+// A publicly known development phrase. Never fund it.
+const SECRET = "test test test test test test test test test test test junk";
+const PASSWORD = "correct horse battery staple";
+const WRONG_PASSWORD = "correct horse battery stapl";
+
+const SALT_BYTES = 16;
+const NONCE_BYTES = 24;
+const POLY1305_TAG_BYTES = 16;
+
+const BASE64 = /^[A-Za-z0-9+/_-]+={0,2}$/;
+
+function b64decode(s) {
+    return sodium.from_base64(s);
+}
+
+// A shallow copy with one field replaced, so the shared fixture is never
+// mutated by a tamper test.
+function withField(blob, field, value) {
+    return { ...blob, [field]: value };
+}
+
+// Flip the low bit of one byte of a base64-encoded field.
+function flipByte(b64, index) {
+    const bytes = b64decode(b64);
+    bytes[index] ^= 0x01;
+    return sodium.to_base64(bytes);
+}
+
+let vault;
+
+beforeAll(async () => {
+    await sodium.ready;
+    vault = await encryptWithPassword(SECRET, PASSWORD);
+});
+
+describe("stored blob shape", () => {
+    test("is exactly the documented { salt, nonce, ciphertext }", () => {
+        expect(Object.keys(vault).sort()).toEqual([
+            "ciphertext",
+            "nonce",
+            "salt",
+        ]);
+    });
+
+    test("every field is a base64 string", () => {
+        for (const field of ["salt", "nonce", "ciphertext"]) {
+            expect(typeof vault[field]).toBe("string");
+            expect(vault[field]).toMatch(BASE64);
+        }
+    });
+
+    test("salt and nonce are full length", () => {
+        expect(b64decode(vault.salt)).toHaveLength(SALT_BYTES);
+        expect(b64decode(vault.nonce)).toHaveLength(NONCE_BYTES);
+    });
+
+    test("ciphertext carries a Poly1305 authentication tag", () => {
+        expect(b64decode(vault.ciphertext)).toHaveLength(
+            SECRET.length + POLY1305_TAG_BYTES,
+        );
+    });
+
+    test("the blob survives JSON storage unchanged", async () => {
+        const stored = JSON.parse(JSON.stringify(vault));
+
+        await expect(decryptWithPassword(stored, PASSWORD)).resolves.toBe(
+            SECRET,
+        );
+    });
+});
+
+describe("no plaintext leakage", () => {
+    test("the secret does not appear in the serialized vault", () => {
+        const serialized = JSON.stringify(vault);
+
+        expect(serialized).not.toContain(SECRET);
+        for (const word of new Set(SECRET.split(" "))) {
+            expect(serialized).not.toContain(word);
+        }
+    });
+
+    test("the ciphertext bytes do not contain the secret bytes", () => {
+        const bytes = Buffer.from(b64decode(vault.ciphertext));
+
+        expect(bytes.includes(Buffer.from(SECRET, "utf8"))).toBe(false);
+        // Not even the first word, which would betray an unencrypted prefix.
+        expect(bytes.includes(Buffer.from("test test", "utf8"))).toBe(false);
+    });
+
+    test("the password does not appear in the serialized vault", () => {
+        expect(JSON.stringify(vault)).not.toContain(PASSWORD);
+    });
+});
+
+describe("round trip", () => {
+    test("decrypts back to the original secret", async () => {
+        await expect(decryptWithPassword(vault, PASSWORD)).resolves.toBe(
+            SECRET,
+        );
+    });
+
+    test("survives a non-ASCII plaintext byte for byte", async () => {
+        const unicode = "recovery phrase é中文\u{1f600}";
+
+        const blob = await encryptWithPassword(unicode, PASSWORD);
+
+        await expect(decryptWithPassword(blob, PASSWORD)).resolves.toBe(
+            unicode,
+        );
+    });
+
+    test("an empty password still round-trips and is not a bypass", async () => {
+        const blob = await encryptWithPassword(SECRET, "");
+
+        await expect(decryptWithPassword(blob, "")).resolves.toBe(SECRET);
+        // An empty password must not act as a skeleton key on other vaults,
+        // nor may a real password open an empty-password vault.
+        await expect(decryptWithPassword(vault, "")).rejects.toThrow();
+        await expect(decryptWithPassword(blob, PASSWORD)).rejects.toThrow();
+    });
+});
+
+describe("fresh salt and nonce", () => {
+    test("two encryptions of the same plaintext differ in all three fields", async () => {
+        const second = await encryptWithPassword(SECRET, PASSWORD);
+
+        expect(second.salt).not.toBe(vault.salt);
+        expect(second.nonce).not.toBe(vault.nonce);
+        expect(second.ciphertext).not.toBe(vault.ciphertext);
+        await expect(decryptWithPassword(second, PASSWORD)).resolves.toBe(
+            SECRET,
+        );
+    });
+});
+
+describe("key derivation cost", () => {
+    // Argon2id's opslimit and memlimit are the whole of the vault's resistance
+    // to an offline attack on a stolen blob, and lowering them breaks nothing
+    // any other test here can see — the suite merely runs faster. So pin them
+    // directly, both to libsodium's INTERACTIVE constants and to the absolute
+    // values those constants must keep meaning.
+    const INTERACTIVE_OPSLIMIT = 2;
+    const INTERACTIVE_MEMLIMIT = 64 * 1024 * 1024;
+
+    test("the interactive constants still mean 2 passes over 64 MiB", () => {
+        expect(sodium.crypto_pwhash_OPSLIMIT_INTERACTIVE).toBe(
+            INTERACTIVE_OPSLIMIT,
+        );
+        expect(sodium.crypto_pwhash_MEMLIMIT_INTERACTIVE).toBe(
+            INTERACTIVE_MEMLIMIT,
+        );
+        // The floor these must never quietly be swapped for: _MIN is one pass
+        // over 8 KiB, an 8192x reduction in memory cost.
+        expect(sodium.crypto_pwhash_OPSLIMIT_MIN).toBeLessThan(
+            INTERACTIVE_OPSLIMIT,
+        );
+        expect(sodium.crypto_pwhash_MEMLIMIT_MIN).toBeLessThan(
+            INTERACTIVE_MEMLIMIT,
+        );
+    });
+
+    test("a key derived at the interactive parameters opens the vault", () => {
+        // Independent of any spy, and of the module's own code path: derive
+        // the key here from the vault's published salt at the interactive cost
+        // and open its ciphertext directly. A vault whose key came from any
+        // other opslimit, memlimit or Argon2id variant yields a different key
+        // and cannot be opened this way.
+        const key = sodium.crypto_pwhash(
+            sodium.crypto_secretbox_KEYBYTES,
+            PASSWORD,
+            b64decode(vault.salt),
+            INTERACTIVE_OPSLIMIT,
+            INTERACTIVE_MEMLIMIT,
+            sodium.crypto_pwhash_ALG_ARGON2ID13,
+        );
+        const opened = sodium.crypto_secretbox_open_easy(
+            b64decode(vault.ciphertext),
+            b64decode(vault.nonce),
+            key,
+        );
+
+        expect(sodium.to_string(opened)).toBe(SECRET);
+    });
+
+    test.each([
+        [
+            "encrypt",
+            async () => {
+                await encryptWithPassword(SECRET, PASSWORD);
+            },
+        ],
+        [
+            "decrypt",
+            async () => {
+                await decryptWithPassword(vault, PASSWORD);
+            },
+        ],
+    ])("%s derives exactly one key at the interactive cost", async (_, run) => {
+        const spy = jest.spyOn(sodium, "crypto_pwhash");
+        try {
+            await run();
+
+            expect(spy).toHaveBeenCalledTimes(1);
+            const [keyBytes, , salt, opslimit, memlimit, alg] =
+                spy.mock.calls[0];
+            expect(keyBytes).toBe(sodium.crypto_secretbox_KEYBYTES);
+            expect(salt).toHaveLength(SALT_BYTES);
+            expect(opslimit).toBe(sodium.crypto_pwhash_OPSLIMIT_INTERACTIVE);
+            expect(memlimit).toBe(sodium.crypto_pwhash_MEMLIMIT_INTERACTIVE);
+            expect(alg).toBe(sodium.crypto_pwhash_ALG_ARGON2ID13);
+        } finally {
+            spy.mockRestore();
+        }
+    });
+});
+
+describe("wrong password", () => {
+    test("is rejected, and rejects cleanly", async () => {
+        // rejects.toThrow asserts a rejected promise, not a synchronous throw
+        // and not an unhandled rejection: the caller can catch this.
+        await expect(
+            decryptWithPassword(vault, WRONG_PASSWORD),
+        ).rejects.toThrow();
+    });
+
+    test("returns no plaintext, not even partially", async () => {
+        const result = await decryptWithPassword(vault, WRONG_PASSWORD).catch(
+            (err) => err,
+        );
+
+        expect(result).toBeInstanceOf(Error);
+        expect(String(result)).not.toContain("test");
+    });
+
+    test("the empty password is rejected on a password-protected vault", async () => {
+        await expect(decryptWithPassword(vault, "")).rejects.toThrow();
+    });
+});
+
+describe("tampering", () => {
+    test("a flipped ciphertext bit is rejected by the auth tag", async () => {
+        const tampered = withField(
+            vault,
+            "ciphertext",
+            flipByte(vault.ciphertext, 0),
+        );
+
+        await expect(decryptWithPassword(tampered, PASSWORD)).rejects.toThrow();
+    });
+
+    test("a flipped bit in the authentication tag itself is rejected", async () => {
+        const tagStart = b64decode(vault.ciphertext).length - 1;
+        const tampered = withField(
+            vault,
+            "ciphertext",
+            flipByte(vault.ciphertext, tagStart),
+        );
+
+        await expect(decryptWithPassword(tampered, PASSWORD)).rejects.toThrow();
+    });
+
+    test("a flipped nonce bit is rejected", async () => {
+        const tampered = withField(vault, "nonce", flipByte(vault.nonce, 0));
+
+        await expect(decryptWithPassword(tampered, PASSWORD)).rejects.toThrow();
+    });
+
+    test("a flipped salt bit is rejected", async () => {
+        const tampered = withField(vault, "salt", flipByte(vault.salt, 0));
+
+        await expect(decryptWithPassword(tampered, PASSWORD)).rejects.toThrow();
+    });
+
+    test("a truncated ciphertext is rejected", async () => {
+        const bytes = b64decode(vault.ciphertext);
+        const tampered = withField(
+            vault,
+            "ciphertext",
+            sodium.to_base64(bytes.slice(0, bytes.length - 4)),
+        );
+
+        await expect(decryptWithPassword(tampered, PASSWORD)).rejects.toThrow();
+    });
+
+    test("a ciphertext shorter than the auth tag is rejected", async () => {
+        const tampered = withField(
+            vault,
+            "ciphertext",
+            sodium.to_base64(b64decode(vault.ciphertext).slice(0, 4)),
+        );
+
+        await expect(decryptWithPassword(tampered, PASSWORD)).rejects.toThrow();
+    });
+
+    test("a truncated nonce is rejected", async () => {
+        const tampered = withField(
+            vault,
+            "nonce",
+            sodium.to_base64(b64decode(vault.nonce).slice(0, NONCE_BYTES - 1)),
+        );
+
+        await expect(decryptWithPassword(tampered, PASSWORD)).rejects.toThrow();
+    });
+
+    test("a ciphertext from another vault is rejected", async () => {
+        const other = await encryptWithPassword("a different secret", PASSWORD);
+        const spliced = withField(vault, "ciphertext", other.ciphertext);
+
+        await expect(decryptWithPassword(spliced, PASSWORD)).rejects.toThrow();
+    });
+
+    test("a missing field is rejected rather than decrypted", async () => {
+        for (const field of ["salt", "nonce", "ciphertext"]) {
+            const broken = { ...vault };
+            delete broken[field];
+
+            await expect(
+                decryptWithPassword(broken, PASSWORD),
+            ).rejects.toThrow();
+        }
+    });
+});

tests/vaultBackend.test.js

@@ -0,0 +1,52 @@
+// The unit tests must exercise the libsodium backend that actually ships
+// (#182). Before this, they could not: node compiles WebAssembly happily,
+// the extension CSP refused it, and so the browser silently ran the
+// wasm2js translation while every test ran the WASM build.
+//
+// With 'wasm-unsafe-eval' in both manifests the two agree, and these tests
+// hold that agreement in place from the node side. tests/manifest.test.js
+// holds up the CSP end of it, and the end-to-end suite observes the real
+// popup.
+
+const { cryptoBackend } = require("../src/shared/vault");
+
+// The module libsodium-wrappers-sumo itself requires and drives. Not a new
+// dependency: it is inspected here, never used to perform crypto, because
+// it is the only thing that can say which backend is loaded.
+const SODIUM_CORE = "libsodium-sumo";
+
+describe("libsodium backend", () => {
+    test("this realm compiles WebAssembly, so the tests run the WASM build", async () => {
+        await expect(cryptoBackend()).resolves.toBe("wasm");
+    });
+
+    test("libsodium did not swap in the wasm2js fallback", async () => {
+        const core = require(SODIUM_CORE);
+        await require("libsodium-wrappers-sumo").ready;
+        // useBackupModule is the entry point to the fallback; taking it
+        // replaces the module's exports with the translation's, and the
+        // entry point goes with them. Still present after ready means the
+        // WASM module is the one in place. The test below is what keeps
+        // that inference honest.
+        expect(typeof core.useBackupModule).toBe("function");
+    });
+
+    // Deliberately last, and deliberately destructive: it takes the
+    // fallback, which replaces the loaded module for the rest of this
+    // file. Jest gives each test file its own module registry, so nothing
+    // outside sees it.
+    //
+    // Without this, the check above would be a claim about libsodium's
+    // internals with nothing holding it to account: if a future version
+    // kept useBackupModule on the fallback module too, the marker would
+    // quietly become true in both backends and the test would pass while
+    // measuring nothing. Forcing the fallback and watching the marker
+    // disappear is what makes its presence mean something.
+    test("the fallback marker distinguishes the two backends", async () => {
+        const core = require(SODIUM_CORE);
+        await require("libsodium-wrappers-sumo").ready;
+        expect(typeof core.useBackupModule).toBe("function");
+        await core.useBackupModule();
+        expect(typeof core.useBackupModule).toBe("undefined");
+    });
+});

tests/wallet.test.js

@@ -0,0 +1,542 @@
+// Tests for src/shared/wallet.js: the DEBUG build flag as it gates mnemonic
+// generation (first two describes), and HD key derivation against published
+// known-answer vectors (rest of the file).
+//
+// The modules read the __BUILD_DEBUG__ global that esbuild replaces at bundle
+// time. Under jest the global is absent, which is exactly the release-build
+// case; the debug-build case is exercised by defining the global and
+// re-requiring the modules with a fresh registry.
+
+const WORDS_IN_12_WORD_PHRASE = 12;
+
+function loadWallet() {
+    const constants = require("../src/shared/constants");
+    const wallet = require("../src/shared/wallet");
+    const log = require("../src/shared/log");
+    return { constants, wallet, log };
+}
+
+describe("generateMnemonic in a release build", () => {
+    beforeEach(() => {
+        jest.resetModules();
+        delete globalThis.__BUILD_DEBUG__;
+    });
+
+    test("DEBUG defaults to false when the build define is absent", () => {
+        const { constants } = loadWallet();
+        expect(constants.DEBUG).toBe(false);
+    });
+
+    test("returns fresh, valid 12-word phrases that are not the test phrase", () => {
+        const { constants, wallet } = loadWallet();
+
+        const first = wallet.generateMnemonic();
+        const second = wallet.generateMnemonic();
+
+        expect(first).not.toBe(second);
+        for (const phrase of [first, second]) {
+            expect(wallet.isValidMnemonic(phrase)).toBe(true);
+            expect(phrase.split(" ")).toHaveLength(WORDS_IN_12_WORD_PHRASE);
+            expect(phrase).not.toBe(constants.DEBUG_MNEMONIC);
+        }
+    });
+
+    test("derives a usable HD wallet from the generated phrase", () => {
+        const { wallet } = loadWallet();
+
+        const { xpub, firstAddress } = wallet.hdWalletFromMnemonic(
+            wallet.generateMnemonic(),
+        );
+
+        expect(xpub.startsWith("xpub")).toBe(true);
+        expect(firstAddress).toMatch(/^0x[0-9a-fA-F]{40}$/);
+    });
+
+    test("the runtime debug toggle cannot re-enable the test phrase", () => {
+        const { constants, wallet, log } = loadWallet();
+
+        // What the settings easter-egg toggle does at runtime.
+        log.setRuntimeDebug(true);
+        expect(log.isDebug()).toBe(true);
+
+        const phrase = wallet.generateMnemonic();
+        expect(phrase).not.toBe(constants.DEBUG_MNEMONIC);
+        expect(wallet.isValidMnemonic(phrase)).toBe(true);
+        expect(phrase).not.toBe(wallet.generateMnemonic());
+
+        log.setRuntimeDebug(false);
+    });
+});
+
+describe("generateMnemonic in a debug build", () => {
+    beforeEach(() => {
+        jest.resetModules();
+        globalThis.__BUILD_DEBUG__ = true;
+    });
+
+    afterEach(() => {
+        delete globalThis.__BUILD_DEBUG__;
+    });
+
+    test("DEBUG is true and the test phrase is returned", () => {
+        const { constants, wallet } = loadWallet();
+
+        expect(constants.DEBUG).toBe(true);
+        expect(wallet.generateMnemonic()).toBe(constants.DEBUG_MNEMONIC);
+    });
+
+    test("the test phrase is itself a valid 12-word BIP-39 phrase", () => {
+        const { constants, wallet } = loadWallet();
+
+        expect(wallet.isValidMnemonic(constants.DEBUG_MNEMONIC)).toBe(true);
+        expect(constants.DEBUG_MNEMONIC.split(" ")).toHaveLength(
+            WORDS_IN_12_WORD_PHRASE,
+        );
+    });
+});
+
+// ---------------------------------------------------------------------------
+// Key derivation.
+//
+// Every address below is a published constant, not something this codebase
+// produced. Asserting against what the implementation happens to return today
+// would pass just as happily with the wrong coin type, the wrong path depth or
+// a non-empty seed passphrase, all of which silently send funds to addresses
+// no other wallet can recover.
+//
+// Vector sources:
+//
+//   VECTOR_PHRASE / VECTOR_ADDRESSES / VECTOR_PRIVATE_KEYS — the standard
+//   development recovery phrase and the first three accounts it yields at
+//   m/44'/60'/0'/0/n with an empty seed passphrase, as published in the
+//   Hardhat and Ganache documentation. Publicly known; never fund it.
+//
+//   ZERO_ENTROPY_PHRASE / ZERO_ENTROPY_ADDRESS — the BIP-39 all-zero-entropy
+//   phrase (Trezor's official BIP-39 vector set, first entry) and its
+//   m/44'/60'/0'/0/0 Ethereum address with an empty seed passphrase. A second,
+//   independently published phrase so the pin is not one vector deep.
+//
+//   BIP32_VECTOR_1_XPRV — the master key of BIP-32 test vector 1
+//   (seed 000102030405060708090a0b0c0d0e0f).
+//
+// The two Hardhat facts cross-check each other: VECTOR_PRIVATE_KEYS[n] is the
+// published key for VECTOR_ADDRESSES[n], so addressFromPrivateKey and the HD
+// path must meet at the same address from two different directions.
+
+const { HDNodeWallet, Mnemonic, verifyMessage } = require("ethers");
+const wallet = require("../src/shared/wallet");
+const { BIP44_ETH_PATH } = require("../src/shared/constants");
+
+const VECTOR_PHRASE =
+    "test test test test test test test test test test test junk";
+
+const VECTOR_ADDRESSES = [
+    "0xf39Fd6e51aad88F6F4ce6aB8827279cffFb92266",
+    "0x70997970C51812dc3A010C7d01b50e0d17dc79C8",
+    "0x3C44CdDdB6a900fa2b585dd299e03d12FA4293BC",
+];
+
+const VECTOR_PRIVATE_KEYS = [
+    "0xac0974bec39a17e36ba4a6b4d238ff944bacb478cbed5efcae784d7bf4f2ff80",
+    "0x59c6995e998f97a5a0044966f0945389dc9e86dae88c7a8412f4603b6b78690d",
+    "0x5de4111afa1a4b94908f83103eb1f1706367c2e68ca870fc3fb9a804cdab365a",
+];
+
+const ZERO_ENTROPY_PHRASE =
+    "abandon abandon abandon abandon abandon abandon " +
+    "abandon abandon abandon abandon abandon about";
+const ZERO_ENTROPY_ADDRESS = "0x9858EfFD232B4033E47d90003D41EC34EcaEda94";
+
+const BIP32_VECTOR_1_XPRV =
+    "xprv9s21ZrQH143K3QTDL4LXw2F7HEK3wJUD2nW2nRk4stbPy6cq3jPPqji" +
+    "ChkVvvNKmPGJxWUtg6LnF5kejMRNNU3TGtRBeJgk33yuGBxrMPHi";
+
+// The master (depth-0) extended private key for a phrase, which is what the
+// import-an-xprv flow is handed. Built with ethers rather than with the module
+// under test, so hdWalletFromXprv is not being checked against itself.
+function masterXprv(phrase, passphrase = "") {
+    return HDNodeWallet.fromSeed(
+        Mnemonic.fromPhrase(phrase, passphrase).computeSeed(),
+    ).extendedKey;
+}
+
+// The account-level (depth-3) extended private key m/44'/60'/0' for a phrase.
+// A normal thing for a user to hold, and not something the import flow can
+// derive the BIP-44 account path from.
+function accountXprv(phrase) {
+    return HDNodeWallet.fromSeed(
+        Mnemonic.fromPhrase(phrase, "").computeSeed(),
+    ).derivePath("m/44'/60'/0'").extendedKey;
+}
+
+// Every single-character substitution of `key`, using base58 characters that
+// are not the original. Base58 has no visually ambiguous characters, so each
+// of these is a plausible typo rather than a contrived string.
+const TYPO_CHARS = ["a", "b", "2", "Z"];
+
+function singleCharacterTypos(key) {
+    const out = [];
+    for (let i = 0; i < key.length; i++) {
+        for (const c of TYPO_CHARS) {
+            if (c === key[i]) continue;
+            out.push(key.slice(0, i) + c + key.slice(i + 1));
+        }
+    }
+    return out;
+}
+
+describe("hdWalletFromMnemonic", () => {
+    test("first address matches the published vector for m/44'/60'/0'/0/0", () => {
+        expect(wallet.hdWalletFromMnemonic(VECTOR_PHRASE).firstAddress).toBe(
+            VECTOR_ADDRESSES[0],
+        );
+    });
+
+    test("second published phrase derives its published address", () => {
+        expect(
+            wallet.hdWalletFromMnemonic(ZERO_ENTROPY_PHRASE).firstAddress,
+        ).toBe(ZERO_ENTROPY_ADDRESS);
+    });
+
+    test("returns the account-level xpub, which is watch-only", () => {
+        const { xpub } = wallet.hdWalletFromMnemonic(VECTOR_PHRASE);
+
+        expect(xpub.startsWith("xpub")).toBe(true);
+        // A neutered ethers node exposes no private key at all, so accept
+        // either absent or null rather than pinning which.
+        expect(
+            HDNodeWallet.fromExtendedKey(xpub).privateKey ?? null,
+        ).toBeNull();
+        expect(wallet.isValidXprv(xpub)).toBe(false);
+    });
+
+    test("the account path is the documented BIP-44 Ethereum path", () => {
+        expect(BIP44_ETH_PATH).toBe("m/44'/60'/0'/0");
+    });
+
+    test("rejects an invalid recovery phrase rather than deriving from it", () => {
+        expect(() => wallet.hdWalletFromMnemonic("not a phrase")).toThrow();
+    });
+});
+
+describe("deriveAddressFromXpub", () => {
+    const { xpub } = wallet.hdWalletFromMnemonic(VECTOR_PHRASE);
+
+    test.each([0, 1, 2])(
+        "child %i matches the published vector address",
+        (index) => {
+            expect(wallet.deriveAddressFromXpub(xpub, index)).toBe(
+                VECTOR_ADDRESSES[index],
+            );
+        },
+    );
+
+    test("agrees with hdWalletFromMnemonic at index 0", () => {
+        expect(wallet.deriveAddressFromXpub(xpub, 0)).toBe(
+            wallet.hdWalletFromMnemonic(VECTOR_PHRASE).firstAddress,
+        );
+    });
+
+    test("rejects garbage instead of returning an address", () => {
+        expect(() =>
+            wallet.deriveAddressFromXpub("xpub-nonsense", 0),
+        ).toThrow();
+    });
+});
+
+describe("hdWalletFromMnemonic seed passphrase handling", () => {
+    // The vectors above are only reproducible with an empty BIP-39 seed
+    // passphrase. This pins that the empty string reaching
+    // HDNodeWallet.fromPhrase is load-bearing: with any passphrase applied the
+    // published address is unreachable, and a wallet derived that way could
+    // not be restored anywhere else from the phrase alone.
+    test("a non-empty seed passphrase would yield a different address", () => {
+        const withPassphrase = HDNodeWallet.fromPhrase(
+            VECTOR_PHRASE,
+            "TREZOR",
+            BIP44_ETH_PATH,
+        ).deriveChild(0).address;
+
+        expect(withPassphrase).not.toBe(VECTOR_ADDRESSES[0]);
+    });
+});
+
+describe("hdWalletFromXprv", () => {
+    // hdWalletFromMnemonic derives the absolute path "m/44'/60'/0'/0" while
+    // hdWalletFromXprv derives the relative path "44'/60'/0'/0". For a
+    // depth-0 master key the two are the same derivation; these tests pin that
+    // equivalence to a published address rather than assuming it.
+    test("master xprv for the vector phrase yields the vector address", () => {
+        expect(
+            wallet.hdWalletFromXprv(masterXprv(VECTOR_PHRASE)).firstAddress,
+        ).toBe(VECTOR_ADDRESSES[0]);
+    });
+
+    test("agrees with hdWalletFromMnemonic on xpub and address", () => {
+        const fromPhrase = wallet.hdWalletFromMnemonic(VECTOR_PHRASE);
+        const fromXprv = wallet.hdWalletFromXprv(masterXprv(VECTOR_PHRASE));
+
+        expect(fromXprv).toEqual(fromPhrase);
+    });
+
+    test("derived xpub generates the same child addresses", () => {
+        const { xpub } = wallet.hdWalletFromXprv(masterXprv(VECTOR_PHRASE));
+
+        expect(
+            [0, 1, 2].map((i) => wallet.deriveAddressFromXpub(xpub, i)),
+        ).toEqual(VECTOR_ADDRESSES);
+    });
+
+    test("accepts the BIP-32 test vector 1 master key", () => {
+        const { xpub, firstAddress } =
+            wallet.hdWalletFromXprv(BIP32_VECTOR_1_XPRV);
+
+        expect(xpub.startsWith("xpub")).toBe(true);
+        expect(firstAddress).toMatch(/^0x[0-9a-fA-F]{40}$/);
+    });
+
+    test("rejects a watch-only xpub", () => {
+        const { xpub } = wallet.hdWalletFromMnemonic(VECTOR_PHRASE);
+
+        expect(() => wallet.hdWalletFromXprv(xpub)).toThrow();
+    });
+
+    test("rejects garbage", () => {
+        expect(() => wallet.hdWalletFromXprv("nonsense")).toThrow();
+    });
+});
+
+describe("isValidXprv", () => {
+    test.each([
+        ["BIP-32 test vector 1 master key", BIP32_VECTOR_1_XPRV, true],
+        ["the empty string", "", false],
+        ["garbage", "not-a-key", false],
+        ["a bare private key", VECTOR_PRIVATE_KEYS[0], false],
+        ["a truncated xprv", BIP32_VECTOR_1_XPRV.slice(0, -6), false],
+        ["an xprv with an extra character", BIP32_VECTOR_1_XPRV + "a", false],
+    ])("%s -> %s", (_name, key, expected) => {
+        expect(wallet.isValidXprv(key)).toBe(expected);
+    });
+
+    test("a watch-only xpub is not an xprv", () => {
+        const { xpub } = wallet.hdWalletFromMnemonic(VECTOR_PHRASE);
+
+        expect(wallet.isValidXprv(xpub)).toBe(false);
+    });
+
+    test("rejects an extended key with a one-character typo", () => {
+        const index = BIP32_VECTOR_1_XPRV.length - 8;
+        const typo =
+            BIP32_VECTOR_1_XPRV.slice(0, index) +
+            (BIP32_VECTOR_1_XPRV[index] === "a" ? "b" : "a") +
+            BIP32_VECTOR_1_XPRV.slice(index + 1);
+
+        expect(wallet.isValidXprv(typo)).toBe(false);
+    });
+
+    // The base58 checksum exists to make a mistyped key impossible to use, and
+    // ethers does not enforce it: HDNodeWallet.fromExtendedKey skips checksum
+    // verification whenever the decoded payload is the usual 82 bytes, which
+    // is precisely the case it is there to catch. A typo anywhere in the key
+    // must be refused, not silently turned into someone else's wallet.
+    test("no single-character typo anywhere in the key is accepted", () => {
+        const accepted = singleCharacterTypos(BIP32_VECTOR_1_XPRV).filter(
+            (typo) => wallet.isValidXprv(typo),
+        );
+
+        expect(accepted).toEqual([]);
+    });
+
+    test("a typo never yields a wallet, let alone a different one", () => {
+        const correct = wallet.hdWalletFromXprv(BIP32_VECTOR_1_XPRV);
+        const derived = [];
+        for (const typo of singleCharacterTypos(BIP32_VECTOR_1_XPRV)) {
+            try {
+                derived.push(wallet.hdWalletFromXprv(typo).firstAddress);
+            } catch {
+                // Rejected, which is the required behaviour.
+            }
+        }
+
+        expect(derived).toEqual([]);
+        expect(correct.firstAddress).toBe(
+            "0x022b971dFF0C43305e691DEd7a14367AF19D6407",
+        );
+    });
+});
+
+describe("extended key depth", () => {
+    // hdWalletFromXprv derives the BIP-44 Ethereum account path from the key
+    // it is given. That is only the path it names when the key is the master
+    // key. Under an account-level key the same derivation lands at
+    // m/44'/60'/0'/44'/60'/0'/0, whose addresses correspond to nothing the
+    // user holds, so a non-master key is refused rather than derived from.
+    test("a master key is a master key", () => {
+        expect(wallet.isMasterExtendedKey(masterXprv(VECTOR_PHRASE))).toBe(
+            true,
+        );
+        expect(wallet.isMasterExtendedKey(BIP32_VECTOR_1_XPRV)).toBe(true);
+    });
+
+    test("an account-level key is not a master key", () => {
+        expect(wallet.isMasterExtendedKey(accountXprv(VECTOR_PHRASE))).toBe(
+            false,
+        );
+    });
+
+    test("a derived xpub is not a master key", () => {
+        expect(
+            wallet.isMasterExtendedKey(
+                wallet.hdWalletFromMnemonic(VECTOR_PHRASE).xpub,
+            ),
+        ).toBe(false);
+    });
+
+    test("a mistyped key is not a master key either", () => {
+        expect(wallet.isMasterExtendedKey(BIP32_VECTOR_1_XPRV + "a")).toBe(
+            false,
+        );
+    });
+
+    test("hdWalletFromXprv rejects an account-level key", () => {
+        expect(() =>
+            wallet.hdWalletFromXprv(accountXprv(VECTOR_PHRASE)),
+        ).toThrow(/master/i);
+    });
+
+    test("getSignerForAddress rejects an account-level key", () => {
+        expect(() =>
+            wallet.getSignerForAddress(
+                { type: "xprv" },
+                0,
+                accountXprv(VECTOR_PHRASE),
+            ),
+        ).toThrow(/master/i);
+    });
+
+    test("the account-level key is well-formed, so only depth rejects it", () => {
+        expect(wallet.isValidXprv(accountXprv(VECTOR_PHRASE))).toBe(true);
+    });
+
+    test("a master key still imports and derives the published addresses", () => {
+        const { xpub, firstAddress } = wallet.hdWalletFromXprv(
+            masterXprv(VECTOR_PHRASE),
+        );
+
+        expect(firstAddress).toBe(VECTOR_ADDRESSES[0]);
+        expect(
+            [0, 1, 2].map((i) => wallet.deriveAddressFromXpub(xpub, i)),
+        ).toEqual(VECTOR_ADDRESSES);
+    });
+});
+
+describe("deriveAddressFromXpub checksum enforcement", () => {
+    // The xpub path shares the hole: fromExtendedKey accepts a mistyped xpub
+    // just as readily, and deriveAddressFromXpub would hand back addresses
+    // from a different tree.
+    const { xpub } = wallet.hdWalletFromMnemonic(VECTOR_PHRASE);
+
+    test("the correct xpub still derives the published addresses", () => {
+        expect(wallet.deriveAddressFromXpub(xpub, 0)).toBe(VECTOR_ADDRESSES[0]);
+    });
+
+    test("no single-character typo anywhere in an xpub is accepted", () => {
+        const derived = [];
+        for (const typo of singleCharacterTypos(xpub)) {
+            try {
+                derived.push(wallet.deriveAddressFromXpub(typo, 0));
+            } catch {
+                // Rejected, which is the required behaviour.
+            }
+        }
+
+        expect(derived).toEqual([]);
+    });
+});
+
+describe("isValidMnemonic", () => {
+    test.each([
+        ["the vector phrase", VECTOR_PHRASE, true],
+        ["the BIP-39 zero-entropy phrase", ZERO_ENTROPY_PHRASE, true],
+        [
+            "a 12-word phrase with a bad checksum",
+            "abandon abandon abandon abandon abandon abandon " +
+                "abandon abandon abandon abandon abandon abandon",
+            false,
+        ],
+        ["an 11-word phrase", "abandon ".repeat(10) + "about", false],
+        ["a word outside the wordlist", VECTOR_PHRASE + " zzzzzz", false],
+        ["the empty string", "", false],
+        ["garbage", "correct horse battery staple", false],
+    ])("%s -> %s", (_name, phrase, expected) => {
+        expect(wallet.isValidMnemonic(phrase)).toBe(expected);
+    });
+});
+
+describe("addressFromPrivateKey", () => {
+    test.each([0, 1, 2])(
+        "published key %i yields its published address",
+        (index) => {
+            expect(
+                wallet.addressFromPrivateKey(VECTOR_PRIVATE_KEYS[index]),
+            ).toBe(VECTOR_ADDRESSES[index]);
+        },
+    );
+
+    test("rejects a key of the wrong length", () => {
+        expect(() => wallet.addressFromPrivateKey("0xdeadbeef")).toThrow();
+    });
+
+    test("rejects the empty string", () => {
+        expect(() => wallet.addressFromPrivateKey("")).toThrow();
+    });
+});
+
+describe("getSignerForAddress", () => {
+    test.each([0, 1, 2])("hd wallet, address index %i", (index) => {
+        const signer = wallet.getSignerForAddress(
+            { type: "hd" },
+            index,
+            VECTOR_PHRASE,
+        );
+
+        expect(signer.address).toBe(VECTOR_ADDRESSES[index]);
+        expect(signer.privateKey).toBe(VECTOR_PRIVATE_KEYS[index]);
+    });
+
+    test.each([0, 1, 2])("xprv wallet, address index %i", (index) => {
+        const signer = wallet.getSignerForAddress(
+            { type: "xprv" },
+            index,
+            masterXprv(VECTOR_PHRASE),
+        );
+
+        expect(signer.address).toBe(VECTOR_ADDRESSES[index]);
+        expect(signer.privateKey).toBe(VECTOR_PRIVATE_KEYS[index]);
+    });
+
+    test("single private key ignores the address index", () => {
+        for (const index of [0, 1, 2]) {
+            const signer = wallet.getSignerForAddress(
+                { type: "privkey" },
+                index,
+                VECTOR_PRIVATE_KEYS[1],
+            );
+
+            expect(signer.address).toBe(VECTOR_ADDRESSES[1]);
+        }
+    });
+
+    test("the returned signer signs recoverably as the expected address", async () => {
+        const signer = wallet.getSignerForAddress(
+            { type: "hd" },
+            1,
+            VECTOR_PHRASE,
+        );
+        const message = "AutistMask derivation test";
+
+        const signature = await signer.signMessage(message);
+
+        expect(verifyMessage(message, signature)).toBe(VECTOR_ADDRESSES[1]);
+    });
+});

tests/walletDefects.test.js

@@ -0,0 +1,290 @@
+// Tests for the stored-state half of the non-master extended key problem.
+//
+// Refusing a non-master xprv at import time does nothing for a wallet that is
+// already in storage: the import that created it ran before the refusal
+// existed. Such a wallet used to sign for the wrong tree and now throws on the
+// send screen instead. These tests pin down that it is named and explained in
+// the wallet list, that nothing on the way there throws, and that a wallet
+// imported from a real master key is untouched by any of it.
+
+const { HDNodeWallet, Mnemonic } = require("ethers");
+
+const wallet = require("../src/shared/wallet");
+const {
+    walletDefect,
+    walletDefectHtml,
+    NON_MASTER_XPRV,
+} = require("../src/shared/walletDefects");
+
+// BIP-39 test vector phrase, published; never used for real funds.
+const VECTOR_PHRASE =
+    "test test test test test test test test test test test junk";
+
+function seedNode(phrase) {
+    return HDNodeWallet.fromSeed(Mnemonic.fromPhrase(phrase, "").computeSeed());
+}
+
+// The master (depth-0) key, which is what the import flow accepts today.
+function masterXprv(phrase) {
+    return seedNode(phrase).extendedKey;
+}
+
+// The account-level (depth-3) key m/44'/60'/0'. A normal thing for a user to
+// hold, and what the import flow used to accept.
+function accountXprv(phrase) {
+    return seedNode(phrase).derivePath("m/44'/60'/0'").extendedKey;
+}
+
+// The wallet record the CURRENT import path writes for a master key: the
+// neutered m/44'/60'/0'/0 node, four levels below a depth-0 key.
+function healthyXprvWallet(name = "Master") {
+    const { xpub, firstAddress } = wallet.hdWalletFromXprv(
+        masterXprv(VECTOR_PHRASE),
+    );
+    return {
+        name,
+        type: "xprv",
+        xpub,
+        nextIndex: 1,
+        encryptedSecret: "irrelevant-to-these-tests",
+        addresses: [{ address: firstAddress, balance: "0.0000" }],
+    };
+}
+
+// The wallet record the PRE-#210 import path wrote for an account-level key:
+// the same four levels, but derived as a relative path *beneath* the key, so
+// the stored xpub sits at depth 3 + 4 = 7. Built here the way the old code
+// built it rather than by calling the module under test, which now refuses.
+function brokenXprvWallet(name = "Imported xprv") {
+    const node = HDNodeWallet.fromExtendedKey(
+        accountXprv(VECTOR_PHRASE),
+    ).derivePath("44'/60'/0'/0");
+    return {
+        name,
+        type: "xprv",
+        xpub: node.neuter().extendedKey,
+        nextIndex: 1,
+        encryptedSecret: "irrelevant-to-these-tests",
+        addresses: [
+            { address: node.deriveChild(0).address, balance: "0.0000" },
+        ],
+    };
+}
+
+describe("the fixtures are what the two import paths actually produced", () => {
+    test("a master import stores a depth-4 xpub", () => {
+        expect(
+            HDNodeWallet.fromExtendedKey(healthyXprvWallet().xpub).depth,
+        ).toBe(4);
+    });
+
+    test("the pre-fix account-level import stored a depth-7 xpub", () => {
+        expect(
+            HDNodeWallet.fromExtendedKey(brokenXprvWallet().xpub).depth,
+        ).toBe(7);
+    });
+});
+
+describe("walletDefect", () => {
+    test("names the defect on a stored non-master xprv wallet", () => {
+        const defect = walletDefect(brokenXprvWallet());
+
+        expect(defect).not.toBeNull();
+        expect(defect.id).toBe(NON_MASTER_XPRV);
+    });
+
+    test("a depth-0 xprv wallet has no defect", () => {
+        expect(walletDefect(healthyXprvWallet())).toBeNull();
+    });
+
+    test("hd and key wallets are never assessed", () => {
+        expect(
+            walletDefect({ type: "hd", xpub: brokenXprvWallet().xpub }),
+        ).toBe(null);
+        expect(walletDefect({ type: "key" })).toBeNull();
+    });
+
+    test("an xprv wallet whose xpub cannot be parsed makes no claim", () => {
+        // No basis to say the key was non-master, so nothing is asserted
+        // about it rather than guessing.
+        expect(walletDefect({ type: "xprv", xpub: "not-a-key" })).toBeNull();
+        expect(walletDefect({ type: "xprv" })).toBeNull();
+    });
+
+    test("nothing about the wallet record is modified by the check", () => {
+        const w = brokenXprvWallet();
+        const before = JSON.stringify(w);
+
+        walletDefect(w);
+
+        expect(JSON.stringify(w)).toBe(before);
+    });
+});
+
+describe("the explanatory copy", () => {
+    const defect = walletDefect(brokenXprvWallet());
+
+    test("every sentence of it is a full sentence", () => {
+        for (const text of [defect.heading, ...defect.paragraphs]) {
+            expect(text).toMatch(/^[A-Z]/);
+            expect(text.trimEnd()).toMatch(/\.$/);
+        }
+    });
+
+    test("it says what was derived wrongly and that these are not the standard addresses", () => {
+        const body = defect.paragraphs.join(" ");
+
+        expect(body).toContain("not a master key");
+        expect(body).toMatch(/standard path/);
+    });
+
+    test("it does not claim the funds are safe and does not claim a loss", () => {
+        const all = [defect.heading, ...defect.paragraphs].join(" ");
+
+        expect(all).not.toMatch(/\bsafe\b/i);
+        expect(all).not.toMatch(/\blost\b|\bstolen\b|\bgone\b/i);
+    });
+
+    test("it says the wallet is not deleted and what the user can do", () => {
+        const body = defect.paragraphs.join(" ");
+
+        expect(body).toMatch(/until you delete it yourself/);
+        expect(body).toMatch(/recovery phrase/);
+    });
+
+    test("it uses the project's vocabulary", () => {
+        const all = [
+            defect.heading,
+            ...defect.paragraphs,
+            defect.shortMessage,
+        ].join(" ");
+
+        expect(all).not.toMatch(/seed phrase|mnemonic|passphrase/i);
+        expect(all).not.toMatch(/\baccounts?\b/i);
+    });
+});
+
+describe("walletDefectHtml", () => {
+    test("renders the heading and every paragraph for a defective wallet", () => {
+        const defect = walletDefect(brokenXprvWallet());
+        const html = walletDefectHtml(brokenXprvWallet());
+
+        expect(html).toContain(defect.heading);
+        for (const p of defect.paragraphs) {
+            expect(html).toContain(p);
+        }
+    });
+
+    test("renders nothing at all for a healthy wallet", () => {
+        expect(walletDefectHtml(healthyXprvWallet())).toBe("");
+    });
+});
+
+describe("the wallet list", () => {
+    let home;
+    let state;
+
+    beforeAll(() => {
+        global.chrome = {
+            storage: { local: { get: async () => ({}), set: async () => {} } },
+            runtime: { sendMessage: () => {} },
+        };
+        home = require("../src/popup/views/home");
+        state = require("../src/shared/state").state;
+    });
+
+    afterEach(() => {
+        state.wallets = [];
+        state.activeAddress = null;
+    });
+
+    test("a stored depth-3 xprv wallet renders the explanation", () => {
+        state.wallets = [brokenXprvWallet("Imported xprv")];
+
+        const html = home.walletListHtml();
+
+        expect(html).toContain(walletDefect(state.wallets[0]).heading);
+        expect(html).toContain("Imported xprv");
+    });
+
+    test("it does not offer to derive further addresses from that wallet", () => {
+        state.wallets = [brokenXprvWallet()];
+
+        expect(home.walletListHtml()).not.toContain("btn-add-address");
+    });
+
+    test("a normal depth-0 xprv wallet renders exactly as it did before", () => {
+        state.wallets = [healthyXprvWallet("Master")];
+
+        const html = home.walletListHtml();
+
+        expect(html).not.toContain(walletDefect(brokenXprvWallet()).heading);
+        expect(html).toContain("btn-add-address");
+        expect(html).toContain(state.wallets[0].addresses[0].address);
+    });
+
+    test("the defective wallet's notice does not bleed onto a healthy one", () => {
+        state.wallets = [brokenXprvWallet("Broken"), healthyXprvWallet("Fine")];
+
+        const html = home.walletListHtml();
+        const healthyPart = html.slice(html.indexOf("Fine"));
+
+        expect(html).toContain(walletDefect(state.wallets[0]).heading);
+        expect(healthyPart).not.toContain(
+            walletDefect(state.wallets[0]).heading,
+        );
+        expect(healthyPart).toContain("btn-add-address");
+    });
+});
+
+describe("no path throws an unhandled error for a defective wallet", () => {
+    test("address derivation from the stored xpub still works", () => {
+        // The stored xpub is at a non-standard depth but is a valid extended
+        // key; deriving from it is what the list render already does.
+        const w = brokenXprvWallet();
+
+        expect(() => wallet.deriveAddressFromXpub(w.xpub, 0)).not.toThrow();
+        expect(wallet.deriveAddressFromXpub(w.xpub, 0)).toBe(
+            w.addresses[0].address,
+        );
+    });
+
+    test("the wallet list renders without throwing", () => {
+        const { state } = require("../src/shared/state");
+        const home = require("../src/popup/views/home");
+        state.wallets = [brokenXprvWallet()];
+
+        expect(() => home.walletListHtml()).not.toThrow();
+
+        state.wallets = [];
+    });
+
+    test("signing refuses with the named defect rather than a bare failure", () => {
+        // getSignerForAddress is the backstop behind the UI gate. It must
+        // still refuse, and it must say why in a sentence the user can read.
+        let thrown = null;
+        try {
+            wallet.getSignerForAddress(
+                { type: "xprv" },
+                0,
+                accountXprv(VECTOR_PHRASE),
+            );
+        } catch (e) {
+            thrown = e;
+        }
+
+        expect(thrown).not.toBeNull();
+        expect(thrown.message).toMatch(/master key/);
+        expect(thrown.message.trimEnd()).toMatch(/\.$/);
+    });
+
+    test("a healthy xprv wallet signs as it always did", () => {
+        const signer = wallet.getSignerForAddress(
+            { type: "xprv" },
+            0,
+            masterXprv(VECTOR_PHRASE),
+        );
+
+        expect(signer.address).toBe(healthyXprvWallet().addresses[0].address);
+    });
+});

tests/walletDelete.test.js

@@ -0,0 +1,129 @@
+const {
+    removeWalletFromState,
+    broadcastActiveChanged,
+} = require("../src/shared/walletDelete");
+
+// Fixed addresses — never used for anything but these tests.
+const A0 = "0x66133E8ea0f5D1d612D2502a968757D1048c214a";
+const A1 = "0xdAC17F958D2ee523a2206206994597C13D831ec7";
+const B0 = "0x2260FAC5E5542a773Aa44fBCfeDf7C193bc2C599";
+const C0 = "0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48";
+
+function wallet(name, addresses) {
+    return {
+        name,
+        addresses: addresses.map((address) => ({ address })),
+    };
+}
+
+// A three-wallet state; wallet A is an HD wallet with two addresses.
+function makeState(overrides = {}) {
+    return {
+        hasWallet: true,
+        wallets: [wallet("A", [A0, A1]), wallet("B", [B0]), wallet("C", [C0])],
+        selectedWallet: 0,
+        selectedAddress: 0,
+        activeAddress: A0,
+        allowedSites: {
+            [A0]: ["a.example"],
+            [A1]: ["b.example"],
+            [B0]: ["c.example"],
+        },
+        deniedSites: { [A1]: ["d.example"], [C0]: ["e.example"] },
+        ...overrides,
+    };
+}
+
+describe("removeWalletFromState", () => {
+    test("deleting the last wallet clears hasWallet", () => {
+        const state = makeState({
+            wallets: [wallet("A", [A0])],
+            allowedSites: { [A0]: ["a.example"] },
+            deniedSites: {},
+        });
+
+        const { activeAddressChanged } = removeWalletFromState(state, 0);
+
+        expect(state.hasWallet).toBe(false);
+        expect(state.wallets).toEqual([]);
+        expect(state.selectedWallet).toBeNull();
+        expect(state.selectedAddress).toBeNull();
+        expect(state.activeAddress).toBeNull();
+        expect(activeAddressChanged).toBe(true);
+    });
+
+    test("deleting a non-selected wallet leaves the selection intact", () => {
+        const state = makeState({
+            selectedWallet: 2,
+            selectedAddress: 0,
+            activeAddress: C0,
+        });
+
+        const { activeAddressChanged } = removeWalletFromState(state, 1);
+
+        // Wallet C moved from index 2 to index 1 by the splice.
+        expect(state.wallets.map((w) => w.name)).toEqual(["A", "C"]);
+        expect(state.selectedWallet).toBe(1);
+        expect(state.selectedAddress).toBe(0);
+        expect(state.activeAddress).toBe(C0);
+        expect(activeAddressChanged).toBe(false);
+        expect(state.hasWallet).toBe(true);
+    });
+
+    test("deleting a wallet after the selection does not shift it", () => {
+        const state = makeState({
+            selectedWallet: 1,
+            selectedAddress: 0,
+            activeAddress: B0,
+        });
+
+        const { activeAddressChanged } = removeWalletFromState(state, 2);
+
+        expect(state.selectedWallet).toBe(1);
+        expect(state.activeAddress).toBe(B0);
+        expect(activeAddressChanged).toBe(false);
+    });
+
+    test("deleting the active wallet falls back to the first remaining address", () => {
+        const state = makeState({
+            selectedWallet: 0,
+            selectedAddress: 1,
+            activeAddress: A1,
+        });
+
+        const { activeAddressChanged } = removeWalletFromState(state, 0);
+
+        expect(state.wallets.map((w) => w.name)).toEqual(["B", "C"]);
+        expect(state.selectedWallet).toBe(0);
+        expect(state.selectedAddress).toBe(0);
+        expect(state.activeAddress).toBe(B0);
+        expect(activeAddressChanged).toBe(true);
+        expect(state.hasWallet).toBe(true);
+    });
+
+    test("site permissions are dropped for every address of the wallet", () => {
+        const state = makeState();
+
+        removeWalletFromState(state, 0);
+
+        expect(state.allowedSites).toEqual({ [B0]: ["c.example"] });
+        expect(state.deniedSites).toEqual({ [C0]: ["e.example"] });
+    });
+});
+
+describe("broadcastActiveChanged", () => {
+    afterEach(() => {
+        delete global.chrome;
+    });
+
+    test("sends AUTISTMASK_ACTIVE_CHANGED to the background", () => {
+        const sendMessage = jest.fn();
+        global.chrome = { runtime: { sendMessage } };
+
+        broadcastActiveChanged();
+
+        expect(sendMessage).toHaveBeenCalledWith({
+            type: "AUTISTMASK_ACTIVE_CHANGED",
+        });
+    });
+});

yarn.lock

@@ -2547,6 +2547,11 @@ pkg-dir@^4.2.0:
   dependencies:
     find-up "^4.0.0"
 
+playwright-core@1.56.0:
+  version "1.56.0"
+  resolved "https://registry.yarnpkg.com/playwright-core/-/playwright-core-1.56.0.tgz#14b40ea436551b0bcefe19c5bfb8d1804c83739c"
+  integrity sha512-1SXl7pMfemAMSDn5rkPeZljxOCYAmQnYLBTExuh6E8USHXGSX3dx6lYZN/xPpTz1vimXmPA9CDnILvmJaB8aSQ==
+
 pngjs@^5.0.0:
   version "5.0.0"
   resolved "https://registry.npmjs.org/pngjs/-/pngjs-5.0.0.tgz"