fix: a Permit2 transfer of the zero address never reads as ETH (closes #685)

Permit2 moves no ETH, but the swap decoder read the zero address in a
PERMIT2_TRANSFER_FROM as ETH, with an ETH figure. Such a move now names
the zero address as its token and gives its amount in base units. The
token is named on `Token moved` and `Token moved into the router`, and
the amount is on `Moved from the sender` and `Paid to`.

The zero-address check the permit lines already made is now one function,
permit2TokenInfo(), which the move lines share. tokenMovedLine() takes
the token's info instead of its address.

A V4 step of ETH that states no amount still gets its own lines beside
such a move. A test covers that case.

Model: opus-5-5

README.md

@@ -2281,6 +2281,8 @@ view would leave a wallet one click from deletion.
         - Endpoint URL input + "Save" button. "Save" asks the URL for `/stats`
           and saves the URL only if that request succeeds. The request carries
           no user data and is made whether or not "Use Blockscout" is ticked.
+    - If the network changes before either "Save" stores its URL, the URL is not
+      saved and a flash message says so
     - Etherscan:
         - "Check recipients on Etherscan" checkbox, unticked until the user
           ticks it
@@ -3564,10 +3566,14 @@ Currently supported:
   on every router but `UniversalRouterV1`, and otherwise gives the address. A
   move into the router needs none of them, because its `Paid to` line and
   `Token moved into the router` line already give the amount, the token and
-  where it goes, and so its amount is shown once. Every `PERMIT2_PERMIT` whose
+  where it goes, and so its amount is shown once. For a move of the zero
-  amount does not stand as the `Amount` figure, before the step that sets the
+  address, `Moved from the sender` gives the amount in base units and
-  input side or after it, gives three lines, in step order, after those for each
+  `Token moved` gives the zero address. For such a move into the router, the
-  `PERMIT2_TRANSFER_FROM`: `Permit2 allowance`, its amount, for example
+  `Paid to` line gives the amount in base units and
+  `Token moved into the router` gives the zero address. Every `PERMIT2_PERMIT`
+  whose amount does not stand as the `Amount` figure, before the step that sets
+  the input side or after it, gives three lines, in step order, after those for
+  each `PERMIT2_TRANSFER_FROM`: `Permit2 allowance`, its amount, for example
   `5000.0000 DAI`, or `Unlimited` for Permit2's maximum; `Allowance token`,
   giving the token's address as the `Token In` line does; and
   `Allowance spender`, the address it lets take the token. Only a permit whose

src/popup/views/settings.js

@@ -44,6 +44,12 @@ let ctx;
 let versionClickCount = 0;
 let versionClickTimer = null;
 
+// The network that Settings was last drawn for. A follow of a switch saved
+// elsewhere sets `state` to the new network first. Settings is drawn again only
+// once the follow's write returns. So both "Save" buttons take this network,
+// not the one in `state`.
+let shownNetwork = null;
+
 // One row per site origin, however many addresses it appears under, each with
 // an [x] that hands it to onRemove.
 function renderSiteList(containerId, origins, onRemove) {
@@ -199,6 +205,7 @@ function renderWalletListSettings() {
 }
 
 function show() {
+    shownNetwork = currentNetwork();
     $("settings-rpc").value = state.rpcUrl;
     $("settings-blockscout").value = state.blockscoutUrl;
     $("settings-network").value = state.networkId;
@@ -306,6 +313,7 @@ function showNewSettings() {
         state.checkRecipientsOnEtherscan;
     if (state.currentView === "settings") {
         markViewRendered("settings");
+        shownNetwork = currentNetwork();
         $("settings-network").value = state.networkId;
         $("settings-rpc").value = state.rpcUrl;
         $("settings-blockscout").value = state.blockscoutUrl;
@@ -319,6 +327,28 @@ function showNewSettings() {
     updateDebugBanner(state.currentView);
 }
 
+// Saves `url` as `field` ("rpcUrl" or "blockscoutUrl") of the network
+// `networkId`, the one that Settings showed when the user tapped "Save". The
+// URL is set in `state` inside the save, holding the lock. So the page cannot
+// follow a switch saved elsewhere (followStoredSettings() in
+// src/popup/index.js) between setting the URL and writing it. If the active
+// network is no longer `networkId`, on this page or in the stored record,
+// nothing is saved. The flash message then says that the network changed.
+async function saveEndpoint(field, url, networkId) {
+    let refused = false;
+    await saveState((stored) => {
+        refused =
+            state.networkId !== networkId || stored.networkId !== networkId;
+        if (refused) return false;
+        state[field] = url;
+    });
+    if (refused) {
+        showFlash("The URL was not saved because the network changed.");
+    } else {
+        showFlash("Saved.");
+    }
+}
+
 function init(_ctx) {
     ctx = _ctx;
     deleteWallet.init(ctx);
@@ -330,6 +360,8 @@ function init(_ctx) {
             showFlash("Please enter an RPC URL.");
             return;
         }
+        // The URL is for the network that Settings shows when "Save" is tapped.
+        const net = shownNetwork;
         showFlash("Testing endpoint...");
         try {
             const resp = await debugFetch(url, {
@@ -348,7 +380,6 @@ function init(_ctx) {
                 showFlash("Endpoint returned an error.");
                 return;
             }
-            const net = currentNetwork();
             if (json.result !== net.chainId) {
                 showFlash("Wrong network: expected " + net.name + ".");
                 return;
@@ -364,9 +395,7 @@ function init(_ctx) {
             showFlash("Could not reach endpoint.");
             return;
         }
-        state.rpcUrl = url;
+        await saveEndpoint("rpcUrl", url, net.id);
-        await saveState();
-        showFlash("Saved.");
     });
 
     $("btn-save-blockscout").addEventListener("click", async () => {
@@ -375,6 +404,7 @@ function init(_ctx) {
             showFlash("Please enter a Blockscout API URL.");
             return;
         }
+        const net = shownNetwork;
         showFlash("Testing endpoint...");
         try {
             const resp = await debugFetch(url + "/stats");
@@ -389,9 +419,7 @@ function init(_ctx) {
             showFlash("Could not reach endpoint.");
             return;
         }
-        state.blockscoutUrl = url;
+        await saveEndpoint("blockscoutUrl", url, net.id);
-        await saveState();
-        showFlash("Saved.");
     });
 
     // Each change is made inside the save, holding the lock. So

src/shared/uniswap.js

@@ -479,6 +479,17 @@ function tokenInfo(address, sources) {
     };
 }
 
+// The token of a Permit2 allowance or of a PERMIT2_TRANSFER_FROM, in the
+// shape tokenInfo() gives. Permit2 has no allowance of ETH and moves no ETH.
+// The zero address there reads as a token nothing knows: its amount in base
+// units, and the zero address as its token.
+function permit2TokenInfo(address, sources) {
+    if (address === "0x0000000000000000000000000000000000000000") {
+        return { symbol: null, decimals: null, address };
+    }
+    return tokenInfo(address, sources);
+}
+
 // A swap amount line. With a scale it is the token quantity; with none it is
 // the base-unit integer with the unknown scale stated, the same refusal the
 // ERC-20 amount line makes, so the screen has one way of saying it. `display`
@@ -497,16 +508,18 @@ function amountText(raw, info) {
 
 // The line giving a moved token, or the token of a permit, under `label`, in
 // the shape of the Token In line, so the screens show it as they show that
-// one. ETH has no address.
+// one. `info` is what tokenInfo() or permit2TokenInfo() gives for the token.
-function tokenMovedLine(label, token, sources) {
+// ETH has no address.
-    const info = tokenInfo(token, sources);
+function tokenMovedLine(label, info) {
     if (!present(info.address)) {
         return { label, value: info.symbol };
     }
     return {
         label,
-        value: info.symbol ? info.symbol + " (" + token + ")" : token,
+        value: info.symbol
-        address: token,
+            ? info.symbol + " (" + info.address + ")"
+            : info.address,
+        address: info.address,
         isToken: true,
     };
 }
@@ -2329,7 +2342,9 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                     : UNDECODED_CURRENCY,
             });
             if (present(s.token)) {
-                details.push(tokenMovedLine("Token moved", s.token, sources));
+                details.push(
+                    tokenMovedLine("Token moved", tokenInfo(s.token, sources)),
+                );
                 details.push({
                     label: "Moved to",
                     value: "The swap step that spends it",
@@ -2340,12 +2355,12 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         // What each PERMIT2_TRANSFER_FROM moves: its amount, its token and
         // where it goes, an address on a line of its own.
         for (const m of movedFromSender) {
+            const info = permit2TokenInfo(m.token, sources);
             details.push({
                 label: "Moved from the sender",
-                value: amountText(m.amount, tokenInfo(m.token, sources))
+                value: amountText(m.amount, info).display,
-                    .display,
             });
-            details.push(tokenMovedLine("Token moved", m.token, sources));
+            details.push(tokenMovedLine("Token moved", info));
             details.push(
                 present(m.to)
                     ? { label: "Moved to", value: m.to }
@@ -2375,36 +2390,15 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                 });
                 continue;
             }
-            // Permit2 has no allowance of ETH. An allowance of the zero
+            const info = permit2TokenInfo(p.token, sources);
-            // address reads as one of a token nothing knows: its amount in
+            details.push({
-            // base units, and the zero address as its token.
+                label: "Permit2 allowance",
-            if (p.token === "0x0000000000000000000000000000000000000000") {
+                value:
-                details.push({
+                    p.amount >= MAX_UINT160
-                    label: "Permit2 allowance",
+                        ? "Unlimited"
-                    value:
+                        : amountText(p.amount, info).display,
-                        p.amount >= MAX_UINT160
+            });
-                            ? "Unlimited"
+            details.push(tokenMovedLine("Allowance token", info));
-                            : unknownDecimalsAmount(p.amount),
-                });
-                details.push({
-                    label: "Allowance token",
-                    value: p.token,
-                    address: p.token,
-                    isToken: true,
-                });
-            } else {
-                details.push({
-                    label: "Permit2 allowance",
-                    value:
-                        p.amount >= MAX_UINT160
-                            ? "Unlimited"
-                            : amountText(p.amount, tokenInfo(p.token, sources))
-                                  .display,
-                });
-                details.push(
-                    tokenMovedLine("Allowance token", p.token, sources),
-                );
-            }
             details.push({
                 label: "Allowance spender",
                 value: p.spender,
@@ -2462,7 +2456,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
             paidTo.push({ label: "Paid to", value: PAID_TO_BRIDGE });
         }
         for (const m of movedIntoRouter) {
-            const info = tokenInfo(m.token, sources);
+            const info = permit2TokenInfo(m.token, sources);
             paidTo.push({
                 label: "Paid to",
                 value:
@@ -2470,9 +2464,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                     amountText(m.amount, info).display +
                     " from the sender (later steps may not spend all of it)",
             });
-            paidTo.push(
+            paidTo.push(tokenMovedLine("Token moved into the router", info));
-                tokenMovedLine("Token moved into the router", m.token, sources),
-            );
         }
         if (outputHeld) {
             paidTo.push({ label: "Paid to", value: STAYS_IN_ROUTER });
@@ -2489,8 +2481,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
             paidTo.push(
                 tokenMovedLine(
                     "Token moved into the router",
-                    getAddress(token),
+                    tokenInfo(getAddress(token), sources),
-                    sources,
                 ),
             );
         }

tests/popupFollowsNetworkSwitch.test.js

@@ -253,6 +253,271 @@ test("a switch back in Settings after a follow whose write failed is stored", as
     expect(told.at(-1).chainId).toBe(NETWORKS.mainnet.chainId);
 });
 
+// The user saves an endpoint URL in Settings on Ethereum Mainnet. Before the
+// URL is stored, the background saves a switch to Sepolia. Another write holds
+// the lock, so the popup's follow of that switch and the URL's save both wait
+// for the lock. Either may take it first. The URL is stored for neither
+// network. The flash message says that the network changed.
+test.each([
+    { button: "btn-save-rpc", field: "settings-rpc", first: "follow" },
+    { button: "btn-save-rpc", field: "settings-rpc", first: "save" },
+    {
+        button: "btn-save-blockscout",
+        field: "settings-blockscout",
+        first: "follow",
+    },
+    {
+        button: "btn-save-blockscout",
+        field: "settings-blockscout",
+        first: "save",
+    },
+])(
+    "$button saves nothing when the network changes before the URL is stored ($first first)",
+    async ({ button, field, first }) => {
+        const page = await bootOnAddress();
+        await page.click("btn-settings");
+        // This answer passes both endpoint checks. The RPC check reads
+        // Ethereum Mainnet's chain id from it. The Blockscout check reads `ok`.
+        globalThis.fetch.mockResolvedValue({
+            ok: true,
+            json: async () => ({ result: NETWORKS.mainnet.chainId }),
+        });
+        const url = "https://own-node.example.invalid";
+
+        let releaseLock;
+        const lockHeld = navigator.locks.request(
+            "autistmask",
+            () =>
+                new Promise((resolve) => {
+                    releaseLock = resolve;
+                }),
+        );
+        // The click handler runs until its save waits for the lock.
+        const tapSave = async () => {
+            page.node(field).value = url;
+            const saving = page.node(button).listeners.click.map((fn) => fn());
+            await page.settle();
+            return saving;
+        };
+        let saving;
+        if (first === "save") saving = await tapSave();
+        await backgroundSwitch(page, "sepolia");
+        if (first === "follow") saving = await tapSave();
+        releaseLock();
+        await lockHeld;
+        await Promise.all(saving);
+        await page.settle();
+
+        const { state } = require("../src/shared/state");
+        expect(state.networkId).toBe("sepolia");
+        expect(JSON.stringify(page.storage.read("autistmask"))).not.toContain(
+            url,
+        );
+        expect(page.text("flash-msg")).toBe(
+            "The URL was not saved because the network changed.",
+        );
+    },
+);
+
+// The popup's follow of the background's switch to Sepolia has set `state` to
+// Sepolia. The follow's write has not returned yet, so Settings still shows
+// Ethereum Mainnet. The user taps "Save" there. The URL is for Ethereum
+// Mainnet, so the save stores the URL for neither network.
+test.each([
+    { button: "btn-save-rpc", field: "settings-rpc" },
+    { button: "btn-save-blockscout", field: "settings-blockscout" },
+])(
+    "$button saves nothing when tapped while the follow's write waits",
+    async ({ button, field }) => {
+        const page = await bootOnAddress();
+        await page.click("btn-settings");
+        // This answer passes both endpoint checks on Ethereum Mainnet.
+        globalThis.fetch.mockResolvedValue({
+            ok: true,
+            json: async () => ({ result: NETWORKS.mainnet.chainId }),
+        });
+        const url = "https://own-node.example.invalid";
+
+        const { set } = page.storage.local;
+        const write = set.getMockImplementation();
+        let releaseWrite;
+        const writeHeld = new Promise((resolve) => {
+            releaseWrite = resolve;
+        });
+        // The background's write lands; the next, the follow's, waits.
+        set.mockImplementationOnce(write).mockImplementationOnce(
+            async (items) => {
+                await writeHeld;
+                await write(items);
+            },
+        );
+        await backgroundSwitch(page, "sepolia");
+        const { state } = require("../src/shared/state");
+        expect(state.networkId).toBe("sepolia");
+        expect(page.value("settings-network")).toBe("mainnet");
+
+        page.node(field).value = url;
+        const saving = page.node(button).listeners.click.map((fn) => fn());
+        await page.settle();
+        releaseWrite();
+        await Promise.all(saving);
+        await page.settle();
+
+        expect(JSON.stringify(page.storage.read("autistmask"))).not.toContain(
+            url,
+        );
+        expect(page.text("flash-msg")).toBe(
+            "The URL was not saved because the network changed.",
+        );
+    },
+);
+
+// The user taps the RPC "Save" on Ethereum Mainnet. While the check waits for
+// the node's answer, the popup follows the background's switch to Sepolia. The
+// node answers with Sepolia's chain id. So the check refuses the node for
+// Ethereum Mainnet, and nothing is stored.
+test("the RPC check compares the answer with the network at the tap", async () => {
+    const page = await bootOnAddress();
+    await page.click("btn-settings");
+    let answer;
+    globalThis.fetch.mockReturnValue(
+        new Promise((resolve) => {
+            answer = resolve;
+        }),
+    );
+    const url = "https://sepolia-node.example.invalid";
+
+    page.node("settings-rpc").value = url;
+    const saving = page.node("btn-save-rpc").listeners.click.map((fn) => fn());
+    await page.settle();
+    await backgroundSwitch(page, "sepolia");
+    const { state } = require("../src/shared/state");
+    expect(state.networkId).toBe("sepolia");
+    answer({ json: async () => ({ result: NETWORKS.sepolia.chainId }) });
+    await Promise.all(saving);
+    await page.settle();
+
+    expect(JSON.stringify(page.storage.read("autistmask"))).not.toContain(url);
+    expect(page.text("flash-msg")).toBe(
+        "Wrong network: expected Ethereum Mainnet.",
+    );
+});
+
+// The user taps the Blockscout "Save" on Ethereum Mainnet. While the check
+// waits for Blockscout's answer, the popup follows the background's switch to
+// Sepolia. The URL is for Ethereum Mainnet, so nothing is stored.
+test("the Blockscout save is for the network at the tap", async () => {
+    const page = await bootOnAddress();
+    await page.click("btn-settings");
+    let answer;
+    globalThis.fetch.mockReturnValue(
+        new Promise((resolve) => {
+            answer = resolve;
+        }),
+    );
+    const url = "https://own-explorer.example.invalid/api/v2";
+
+    page.node("settings-blockscout").value = url;
+    const saving = page
+        .node("btn-save-blockscout")
+        .listeners.click.map((fn) => fn());
+    await page.settle();
+    await backgroundSwitch(page, "sepolia");
+    expect(page.value("settings-network")).toBe("sepolia");
+    answer({ ok: true });
+    await Promise.all(saving);
+    await page.settle();
+
+    expect(JSON.stringify(page.storage.read("autistmask"))).not.toContain(url);
+    expect(page.text("flash-msg")).toBe(
+        "The URL was not saved because the network changed.",
+    );
+});
+
+// Settings is open when the network changes to Sepolia. The popup follows the
+// background's switch, or the user picks Sepolia in the network selector. Each
+// "Save" after the switch stores its URL for Sepolia.
+test.each([
+    ["a follow", (page) => backgroundSwitch(page, "sepolia")],
+    [
+        "the network selector",
+        async (page) => {
+            const select = page.node("settings-network");
+            select.value = "sepolia";
+            for (const fn of select.listeners.change) await fn();
+            await page.settle();
+        },
+    ],
+])(
+    "after a switch to Sepolia by %s, Settings saves each URL for Sepolia",
+    async (_how, switchToSepolia) => {
+        const page = await bootOnAddress();
+        await page.click("btn-settings");
+        await switchToSepolia(page);
+        // This answer passes both endpoint checks on Sepolia. The RPC check
+        // reads Sepolia's chain id from it. The Blockscout check reads `ok`.
+        globalThis.fetch.mockResolvedValue({
+            ok: true,
+            json: async () => ({ result: NETWORKS.sepolia.chainId }),
+        });
+        const rpcUrl = "https://own-node.example.invalid";
+        const blockscoutUrl = "https://own-explorer.example.invalid/api/v2";
+
+        page.node("settings-rpc").value = rpcUrl;
+        await page.click("btn-save-rpc");
+        expect(page.text("flash-msg")).toBe("Saved.");
+        page.node("settings-blockscout").value = blockscoutUrl;
+        await page.click("btn-save-blockscout");
+        expect(page.text("flash-msg")).toBe("Saved.");
+
+        const stored = page.storage.read("autistmask");
+        expect(stored.networkId).toBe("sepolia");
+        expect(stored.rpcUrl).toBe(rpcUrl);
+        expect(stored.blockscoutUrl).toBe(blockscoutUrl);
+    },
+);
+
+// The user picks Sepolia in Settings, but the switch's write fails. The page is
+// then on Sepolia, while Settings was last drawn for Ethereum Mainnet. A "Save"
+// after the failed switch stores nothing for either network.
+test.each([
+    { button: "btn-save-rpc", field: "settings-rpc" },
+    { button: "btn-save-blockscout", field: "settings-blockscout" },
+])(
+    "$button saves nothing after a switch in Settings whose write failed",
+    async ({ button, field }) => {
+        const page = await bootOnAddress();
+        await page.click("btn-settings");
+        page.storage.local.set.mockRejectedValueOnce(
+            new Error("quota exceeded"),
+        );
+        const select = page.node("settings-network");
+        select.value = "sepolia";
+        for (const fn of select.listeners.change) {
+            await expect(fn()).rejects.toThrow("quota exceeded");
+        }
+        await page.settle();
+        const { state } = require("../src/shared/state");
+        expect(state.networkId).toBe("sepolia");
+        // This answer passes both endpoint checks on Ethereum Mainnet.
+        globalThis.fetch.mockResolvedValue({
+            ok: true,
+            json: async () => ({ result: NETWORKS.mainnet.chainId }),
+        });
+        const url = "https://own-node.example.invalid";
+
+        page.node(field).value = url;
+        await page.click(button);
+
+        expect(JSON.stringify(page.storage.read("autistmask"))).not.toContain(
+            url,
+        );
+        expect(page.text("flash-msg")).toBe(
+            "The URL was not saved because the network changed.",
+        );
+    },
+);
+
 // Such as one a newer build wrote, which this build cannot read. Nothing reads
 // or writes the stored record for it: the popup's next save finds it, as
 // before.

tests/uniswap.test.js

@@ -3440,6 +3440,82 @@ describe("uniswap decoder", () => {
             });
         });
 
+        // https://git.eeqj.de/sneak/AutistMask/issues/685 — Permit2 moves no
+        // ETH, so a PERMIT2_TRANSFER_FROM of the zero address reads as a move
+        // of a token nothing knows. On next at ec6b6b5 its lines read ETH,
+        // with an ETH figure.
+        describe("a PERMIT2_TRANSFER_FROM of the zero address", () => {
+            const MOVED_AMOUNT =
+                "1000000000000000000 base units (decimals unknown)";
+
+            test("to another address names the address", () => {
+                const result = decodeSteps(
+                    [0x00, 0x02],
+                    [V3_600, transfer(ZERO_ADDR, OTHER_ADDR, ONE_WETH)],
+                );
+                expect(linesBetweenTokens(result)).toEqual([
+                    ["Amount", "600.0000 USDT"],
+                    ["Moved from the sender", MOVED_AMOUNT],
+                    ["Token moved", ZERO_ADDR],
+                    ["Moved to", OTHER_ADDR],
+                ]);
+                expect(detail(result, "Token moved").address).toBe(ZERO_ADDR);
+            });
+
+            test("into the router names the address", () => {
+                const result = decodeSteps(
+                    [0x02, 0x00],
+                    [transfer(ZERO_ADDR, ROUTER_ADDR, ONE_WETH), V3_600],
+                );
+                expect(detail(result, "Paid to").value).toBe(
+                    "The router, " +
+                        MOVED_AMOUNT +
+                        " from the sender (later steps may not spend all of it)",
+                );
+                expect(detail(result, "Token moved into the router")).toEqual({
+                    label: "Token moved into the router",
+                    value: ZERO_ADDR,
+                    address: ZERO_ADDR,
+                    isToken: true,
+                });
+            });
+
+            // The V4 step's SETTLE names the user as payer and states no
+            // amount. The step's lines say that the ETH amount is not known.
+            test("after a V4 exact-out step of ETH, also shows that the ETH amount is not known", () => {
+                const v4EthExactOut = encodeV4Swap(
+                    new Uint8Array([
+                        V4_SWAP_EXACT_OUT_SINGLE_ID,
+                        V4_SETTLE_ID,
+                        V4_TAKE_ALL_ID,
+                    ]),
+                    [
+                        encodeV4ExactOutSingle(
+                            ZERO_ADDR,
+                            USDC_ADDR,
+                            590000000n,
+                            ONE_WETH,
+                        ),
+                        encodeV4Settle(ZERO_ADDR),
+                        encodeV4TakeAll(USDC_ADDR, 0n),
+                    ],
+                );
+                const result = decodeSteps(
+                    [0x10, 0x02],
+                    [v4EthExactOut, transfer(ZERO_ADDR, OTHER_ADDR, ONE_WETH)],
+                );
+                expect(detail(result, "Token In").value).toBe("ETH (native)");
+                expect(linesBetweenTokens(result)).toEqual([
+                    ["Moved from the sender", UNDECODED],
+                    ["Token moved", "ETH"],
+                    ["Moved to", "The swap step that spends it"],
+                    ["Moved from the sender", MOVED_AMOUNT],
+                    ["Token moved", ZERO_ADDR],
+                    ["Moved to", OTHER_ADDR],
+                ]);
+            });
+        });
+
         // https://git.eeqj.de/sneak/AutistMask/issues/682 — V4 pays a SETTLE
         // of ETH from the router's own ETH, whichever payer the SETTLE names,
         // and the router holds the transaction's value. On next at 36b2002 a