fix: tracked tokens' balances are read through the RPC endpoint (closes #669)

refreshBalances() now reads the balance of every token tracked on the
active network, at every address, with balanceOf through the same
provider as the ETH balance. The entry takes its holder count and
decimals from Blockscout's entry for the token in the same refresh, or
keeps them from before while Blockscout fails. A failed balanceOf keeps
the token's previous entry, or takes Blockscout's entry when there is
none, and is logged. Blockscout's answer still adds the tokens the user
has not tracked, as before.

The browser test for a hostile symbol now untracks the stub token
first, because a tracked token is listed under the symbol it was added
with.

Model: opus-5-5

README.md

@@ -461,13 +461,15 @@ address, the transaction assertions run against the raw signed transaction
 captured at `eth_sendRawTransaction` rather than against anything the extension
 reported, rejecting each prompt is required to return a rejection to the page
 rather than hang or resolve, a network switch request is required to leave the
-stored network unchanged and send no `chainChanged` until it is approved, a
-network switch in Settings is required to send the page `chainChanged` with the
-new chain id, a prompt raised while another approval window has focus is
-required to open a window of its own, and the password is required to be absent
-from every message the approval window sends to the background — with the
-message that would carry it required to be present, so that check cannot pass by
-observing nothing. That last one is the standing floor under
+stored network unchanged and send no `chainChanged` until it is approved, the
+popup open all along is required to show the `[TESTNET]` banner once a switch to
+Sepolia is approved and to drop it once the switch back is, a network switch in
+Settings is required to send the page `chainChanged` with the new chain id, a
+prompt raised while another approval window has focus is required to open a
+window of its own, and the password is required to be absent from every message
+the approval window sends to the background — with the message that would carry
+it required to be present, so that check cannot pass by observing nothing. That
+last one is the standing floor under
 [#157](https://git.eeqj.de/sneak/AutistMask/issues/157).
 
 The limits of that coverage and of the rest of the Chrome suite, none of them
@@ -603,9 +605,10 @@ suite), wallet creation through the UI, the Add Token screen, and the dApp round
 trips — `eth_requestAccounts`, `personal_sign`, `wallet_switchEthereumChain`
 rejected and then approved, `eth_sendTransaction`, and a closed approval window
 rejecting with EIP-1193 4001 — driven through the real content script,
-background page and approval windows. The `personal_sign` prompt is also
-required to fit its window without scrolling sideways, with the extension's
-pages at 170% zoom.
+background page and approval windows. The popup open all along is required to
+show the `[TESTNET]` banner once the switch to Sepolia is approved and to drop
+it once the switch back is. The `personal_sign` prompt is also required to fit
+its window without scrolling sideways, with the extension's pages at 170% zoom.
 
 The suite lives in `tests/e2e/firefox/`. Its WebDriver client (`driver.js`) has
 **no npm dependencies at all**: it is built on global `fetch` and
@@ -842,7 +845,7 @@ src/
     views/            — one JS module per screen (home, send, approval, etc.)
   shared/             — modules used by both popup and background
     alarms.js         — recurring background jobs (extension alarms API)
-    balances.js       — ETH + ERC-20 balance fetching via RPC + Blockscout
+    balances.js       — ETH and tracked token balances via RPC, others via Blockscout
     constants.js      — chain IDs, default RPC endpoint, ERC-20 ABI
     ens.js            — ENS forward/reverse resolution (popup only)
     holders.js        — holder-count parsing and the low-holder rule
@@ -1170,8 +1173,8 @@ fetched, without that cross-address check, and shows the row's figure.
 **Decoded amount lines on the transaction approval screen:** the `Amount` line
 of a decoded ERC-20 call, and the `Amount` and `Min. received` lines of a
 decoded swap (see TxApproval below; `Min. received` reads `Min. paid out` unless
-only the user is paid, see Transaction Decoding), do not always read as a
-number. They can read:
+only the user is paid and no allowance goes to a spender other than the router,
+see Transaction Decoding), do not always read as a number. They can read:
 
 - A formatted quantity, e.g. `17.1900 USDT`, when the token's scale is known:
   truncated to four decimals, with the floor and the zero cases described above.
@@ -1240,7 +1243,11 @@ only when no earlier step set it. It finds each side by three rules:
    is their sum; in any other case the step gives no `Amount`. The decoder reads
    no amount from an exact-out action, and an open delta is not a stated amount.
    Its `Min. received` is found the same way, from the `amountOutMin` of the
-   actions that buy the output currency.
+   actions that buy the output currency, except that the step gives none when a
+   swap action in it also spends the output currency, because the step then does
+   not pay out all that those actions buy. A step that buys at least 0.5 WETH
+   with USDT and swaps 0.3 WETH of it for USDC, with WETH as its output side,
+   gives no `Min. received`.
 3. If any swap action in the step could not be read, only `SETTLE`,
    `SETTLE_ALL`, `TAKE` and `TAKE_ALL` name its sides, and the step gives no
    `Amount` or `Min. received`. A side they did not name is unknown, and the
@@ -1372,23 +1379,30 @@ The core hierarchy is **Wallets → Addresses**:
 - The user can have multiple wallets, each with multiple addresses (HD) or a
   single address (key).
 
-Which tokens an address shows is decided by `fetchTokenBalances()` in
-`src/shared/balances.js`, from the Blockscout `token-balances` response, so
-tokens do appear without the user adding them. An ERC-20 is shown when its
-balance is nonzero and it is in the bundled known-token list, is tracked by the
-user, or has 1,000 or more holders; a token claiming a symbol from the bundled
-list from any other contract address is always dropped, and so is any token
-claiming a symbol that belongs to the native asset and therefore has no
-legitimate contract at all (`"ETH"`, and every network's `nativeCurrency`, such
-as `"SepoliaETH"`, on every network). That filter is unconditional — the "Hide
-tokens with fewer than 1,000 holders" setting governs the transaction history
-and the send-screen token selector, not this list. A token's holder count is
-unknown when the explorer reports none, or reports anything other than a whole
-number written in digits alone, such as `1,000` or `1e3` (`parseHoldersCount()`
-in `src/shared/holders.js`). This list does not take an unknown count as 1,000
-or more, so such a token is shown only when it is on the bundled list or
-tracked. `fetchTokenBalances()` stores every nonzero holding of a token it
-admits, however small, but a holding below 0.000001 is left out of the balance
+Which tokens an address shows is decided on every refresh by `refreshBalances()`
+in `src/shared/balances.js`. The balance of each token tracked on the active
+network is read with `balanceOf` through the RPC endpoint, for every address.
+Its holder count and `decimals` are those of Blockscout's entry for it in the
+same refresh, kept from before while Blockscout fails. A read that fails keeps
+that token's previous entry, as a failed ETH balance keeps its figure, or takes
+Blockscout's entry from the same refresh when there is none. Every other token
+comes from the Blockscout `token-balances` response (`fetchTokenBalances()`), so
+tokens do appear without the user adding them, and they keep their previous
+figures while Blockscout fails. A tracked token is shown when its balance is
+nonzero, and any other ERC-20 when its balance is nonzero and it is in the
+bundled known-token list or has 1,000 or more holders. A token claiming a symbol
+from the bundled list from any other contract address is always dropped, tracked
+or not, and so is any token claiming a symbol that belongs to the native asset
+and therefore has no legitimate contract at all (`"ETH"`, and every network's
+`nativeCurrency`, such as `"SepoliaETH"`, on every network). That filter is
+unconditional — the "Hide tokens with fewer than 1,000 holders" setting governs
+the transaction history and the send-screen token selector, not this list. A
+token's holder count is unknown when the explorer reports none, or reports
+anything other than a whole number written in digits alone, such as `1,000` or
+`1e3` (`parseHoldersCount()` in `src/shared/holders.js`). This list does not
+take an unknown count as 1,000 or more, so such a token is shown only when it is
+on the bundled list or tracked. Every nonzero holding of a token shown is stored
+exactly, however small, but a holding below 0.000001 is left out of the balance
 lists, the send-screen token selector, the address total and the remove-address
 warning (`isBelowOneMillionth()` in `src/shared/amountDisplay.js`). The Send and
 confirmation screens show it when its token is the one being sent. Tracked
@@ -1564,20 +1578,29 @@ such as an edit typed into Settings and not yet saved. Home is the one screen
 "Back" always re-renders, so the wallet list reflects anything that changed
 while the user was away from it.
 
-A network switch in Settings leaves every screen beneath Settings showing the
-previous network, so after it "Back" behaves as in a reopened popup: every
-screen on the stack counts as not yet rendered, and the stack is cut at the
-first screen that cannot be rendered from saved state, such as Send or AddToken,
-or at AddressToken for any token but the native one, because that token was
-picked on the previous network. The cut stack is saved with the switch, so a
-popup closed straight after it and reopened onto Settings lands in the same
-place. "Back" then renders the screen it lands on for the new network, and
-anything typed there and not saved, which belonged to the previous network, is
-dropped. ConfirmTx, WaitTx, SuccessTx, ErrorTx and TransactionDetail are
-rendered instead for the network of the transaction they show: the network it
-was reviewed on for ConfirmTx, and the network it was sent on for the others.
-Without a wallet the stack is not cut, because it starts at Welcome, which shows
-nothing from a network.
+A network switch leaves every screen on the page showing the previous network.
+The user makes it in Settings, or approves a site's request and the background
+saves it. Any other popup open meanwhile takes the switch from the stored
+record, even one saved while it was opening, and never switches the network
+itself. A switch the user picks in its Settings while it takes one is made after
+it, not overwritten by it. An approval window does not take the switch. After
+the switch, whichever way the page got it, "Back" behaves as in a reopened
+popup: every screen on the stack counts as not yet rendered, and the stack is
+cut at the first screen that cannot be rendered from saved state, such as Send
+or AddToken, or at AddressToken for any token but the native one, because that
+token was picked on the previous network and is no longer selected. The cut
+stack is saved with the popup's new network, so a popup closed straight after
+and reopened lands in the same place. The screen on top is drawn again for the
+new network: Settings in place, and any other screen as a reopened popup draws
+it, so Home takes the place of one that cannot be rendered from saved state or
+of AddressToken for a token no longer selected. "Back" then renders the screen
+it lands on for the new network, and anything typed there and not saved, which
+belonged to the previous network, is dropped. ConfirmTx, WaitTx, SuccessTx,
+ErrorTx and TransactionDetail are rendered instead for the network of the
+transaction they show: the network it was reviewed on for ConfirmTx, and the
+network it was sent on for the others. Without a wallet the stack is not cut and
+only Settings is drawn again, because the stack starts at Welcome, and Welcome
+and AddWallet show nothing from a network.
 
 Every screen that holds secret material in the page registers a cleanup with
 `onViewLeave()` (`src/popup/views/helpers.js`), which `showView()` runs on every
@@ -2646,7 +2669,8 @@ AutistMask is not a fully self-contained offline tool. It necessarily
 communicates with three external services to function as a wallet:
 
 - **Ethereum JSON-RPC endpoint**: The extension needs an Ethereum node to query
-  balances (`eth_getBalance`), read ERC-20 token contracts (`eth_call`),
+  balances (`eth_getBalance`), read ERC-20 token contracts (`eth_call`), among
+  them the balance of every tracked token at every address (`balanceOf`),
   estimate gas (`eth_estimateGas`), fetch nonces (`eth_getTransactionCount`),
   broadcast transactions (`eth_sendRawTransaction`), and check transaction
   receipts. The default endpoint is a public RPC (configurable by the user to
@@ -3185,8 +3209,9 @@ Currently supported:
   `Min. paid out`, because the swap's minimum includes the fee. The minimum
   reads `Min. received` only when some step pays the transaction's sender (the
   From address on TxApproval, the sender the explorer reports on
-  TransactionDetail) and no `Paid to` line is shown. `Paid to` lines after
-  `Token Out` name each other address paid; one reads
+  TransactionDetail), no `Paid to` line is shown, and no permit or batch grants
+  an allowance to a spender other than the router (see below). `Paid to` lines
+  after `Token Out` name each other address paid; one reads
   `The bridge, which pays the deposit's recipient on another network` for a
   bridge deposit; one reads, for example,
   `The router, 2000.0000 USDT from the sender (later steps may not spend all of it)`
@@ -3240,7 +3265,8 @@ Currently supported:
   (listed at the end of this section), a step whose input it cannot read, in
   whole or in part, and a step it fails on. Every other `PERMIT2_PERMIT`, before
   the step that sets the input side or after it, leaves `Token In` and the
-  `Amount` line as they read with no permit: a permit of 5,000 DAI to another
+  `Amount` line as they read with no permit, unless it lets a spender other than
+  the router take `Token In` (see below): a permit of 5,000 DAI to another
   address and then a V3 exact-in of 600 USDT read `Swap USDT → USDC` with
   `Amount 600.0000 USDT`, and so do that exact-in and then a permit of 5,000 DAI
   to the router. When a permit's amount stands and the step that sets the input
@@ -3307,19 +3333,26 @@ Currently supported:
   `PERMIT2_PERMIT` or `PERMIT2_PERMIT_BATCH` whose input the decoder cannot
   read, such as one whose token or spender word has a nonzero top byte, may let
   any spender take any amount of any token: it gives one `Permit2 allowance`
-  line alone, reading `Unknown (could not be decoded)`, and leaves no `Amount`
-  line, whose figure might be too low. These lines change neither the `Paid to`
-  lines nor the minimum's label: a permit or batch pays nobody. A step goes
-  unread when its recipient does not decode as an address, when it is a V3 swap
-  step whose path is shorter than one token address or has bytes after its last
-  hop, or when it is a command the decoder does not read: every command other
-  than `PERMIT2_PERMIT`, `PERMIT2_PERMIT_BATCH`, `PERMIT2_TRANSFER_FROM`,
-  `V2_SWAP_EXACT_IN`, `V2_SWAP_EXACT_OUT`, `V3_SWAP_EXACT_IN`,
-  `V3_SWAP_EXACT_OUT`, `V4_SWAP`, `SWEEP`, `TRANSFER`, `PAY_PORTION`,
-  `PAY_PORTION_FULL_PRECISION`, `ACROSS_V4_DEPOSIT_V3`, `WRAP_ETH`,
-  `UNWRAP_WETH` and `BALANCE_CHECK_ERC20` (`PERMIT2_TRANSFER_FROM_BATCH`,
-  `EXECUTE_SUB_PLAN` and the NFT commands among them), or a type its release
-  names no command for.
+  line alone, reading `Unknown (could not be decoded)`. These lines change no
+  `Paid to` line: a permit or batch pays nobody. But code that a step runs, such
+  as a V4 pool's hook or a token's own code, can call a spender other than the
+  router, which can then take up to its allowance from the user's wallet before
+  the transaction ends. So an allowance to any spender but the router, or a
+  permit or batch the decoder cannot read, makes the minimum read
+  `Min. paid out`, and when its token is `Token In`, or the decoder does not
+  know its token or `Token In`, it leaves no `Amount` line, whose figure might
+  be too low: a permit of 5,000 USDT to another address and then a V3 exact-in
+  of 600 USDT read with no `Amount` line, and the 600 USDT gets lines of its
+  own. A step goes unread when its recipient does not decode as an address, when
+  it is a V3 swap step whose path is shorter than one token address or has bytes
+  after its last hop, or when it is a command the decoder does not read: every
+  command other than `PERMIT2_PERMIT`, `PERMIT2_PERMIT_BATCH`,
+  `PERMIT2_TRANSFER_FROM`, `V2_SWAP_EXACT_IN`, `V2_SWAP_EXACT_OUT`,
+  `V3_SWAP_EXACT_IN`, `V3_SWAP_EXACT_OUT`, `V4_SWAP`, `SWEEP`, `TRANSFER`,
+  `PAY_PORTION`, `PAY_PORTION_FULL_PRECISION`, `ACROSS_V4_DEPOSIT_V3`,
+  `WRAP_ETH`, `UNWRAP_WETH` and `BALANCE_CHECK_ERC20`
+  (`PERMIT2_TRANSFER_FROM_BATCH`, `EXECUTE_SUB_PLAN` and the NFT commands among
+  them), or a type its release names no command for.
 
 ### Non-Goals Forever
 

src/popup/index.js

@@ -5,12 +5,14 @@ const {
     state,
     saveState,
     onSaveFailure,
+    takeStoredNetwork,
     loadState,
 } = require("../shared/state");
 const { StateUnusableError } = require("../shared/stateSchema");
 const { log, setRuntimeDebug } = require("../shared/log");
 const { refreshPrices } = require("../shared/prices");
 const { refreshBalances } = require("../shared/balances");
+const { clearPopupCaches } = require("../shared/chainSwitch");
 const {
     $,
     showView,
@@ -22,6 +24,7 @@ const {
 } = require("./views/helpers");
 const { applyTheme } = require("./theme");
 const {
+    onStorageChanged,
     tabsGetCurrent,
     tabsGetZoom,
     windowsGetCurrent,
@@ -72,12 +75,13 @@ let refreshTimer = null;
 // lock, its results are copied onto the address records in `state` only if the
 // network it ran on is still the active one, on this page and in the stored
 // record; the background's switch, after the user approves a site's request,
-// changes only the stored record. A switch while the refresh ran cleared every
-// address's balances (applyChainSwitchFields() in
-// src/shared/chainSwitchFields.js), and the previous network's must not come
-// back over them (https://git.eeqj.de/sneak/AutistMask/issues/577). A dropped
-// refresh is not recorded as done. Results are copied by address, so an address
-// added or removed meanwhile is left as it is.
+// reaches this page only after the stored record (followNetworkSwitch() below).
+// A switch while the refresh ran cleared every address's balances
+// (applyChainSwitchFields() in src/shared/chainSwitchFields.js), and the
+// previous network's must not come back over them
+// (https://git.eeqj.de/sneak/AutistMask/issues/577). A dropped refresh is not
+// recorded as done. Results are copied by address, so an address added or
+// removed meanwhile is left as it is.
 async function doRefreshAndRender() {
     if (refreshInFlight) return;
     refreshInFlight = true;
@@ -147,6 +151,7 @@ const ctx = {
     renderWalletList,
     doRefreshAndRender,
     startRefresh,
+    restoreView,
     pageClosed: pageClosed.signal,
     showAddWalletView: () => {
         pushCurrentView();
@@ -214,6 +219,28 @@ function fallbackView() {
     showView("main");
 }
 
+// When the background saves a network switch, once the user approves a site's
+// request, or another popup page saves one, this page follows the stored
+// record. It takes the network the record names as a save reads it, holding
+// the lock, so no later save of this page writes the previous network back, and
+// then leaves the page as a switch in Settings leaves it. This page's own
+// switch in Settings is made under the lock as well (onChainSwitch() in
+// src/shared/chainSwitch.js), so a record naming a network other than this
+// page's always holds a switch saved elsewhere, and a switch the user picks
+// here while this waits for the lock is made after it.
+async function followNetworkSwitch() {
+    let switched = false;
+    // A failed save is reported by saveState() itself: see onSaveFailure().
+    await saveState((stored) => {
+        if (stored.networkId === state.networkId) return false;
+        settings.cutViewStack();
+        takeStoredNetwork(stored);
+        clearPopupCaches();
+        switched = true;
+    }).catch(() => {});
+    if (switched) settings.showNewNetwork();
+}
+
 // The background opens the approval window as wide as the page, but the
 // browser counts the window's frame in that width, and a screen taller than
 // the window takes a vertical scrollbar out of it too. So once the screen is
@@ -358,6 +385,17 @@ async function init() {
     settingsAddToken.init(ctx);
     deleteAddress.init(ctx);
 
+    // Only a record naming a network other than this page's is followed: the
+    // one this page's own switch in Settings saves names the network it
+    // already has, and a record naming none is no switch.
+    onStorageChanged((changes) => {
+        const written = changes.autistmask && changes.autistmask.newValue;
+        if (!written || !written.networkId) return;
+        if (written.networkId !== state.networkId) followNetworkSwitch();
+    });
+    // A switch saved since loadState() above, before there was a listener.
+    followNetworkSwitch();
+
     if (!state.hasWallet) {
         showView("welcome");
     } else {

src/popup/viewRouter.js

@@ -39,8 +39,8 @@ function markViewRendered(view) {
 }
 
 // Begin a fresh page-load scope. The popup gets one by being loaded, and
-// asks for one when the user switches the network, because every screen
-// then on the page shows the previous network (views/settings.js); the
+// asks for one after a network switch, because every screen then on the page
+// shows the previous network (showNewNetwork() in views/settings.js); the
 // unit tests, which simulate several page loads against one module
 // instance, ask for one too.
 function resetRenderedViews() {

src/popup/views/settings.js

@@ -38,6 +38,8 @@ const {
 
 const { notify, sendMessage } = require("../../shared/browserApi");
 
+let ctx;
+
 let versionClickCount = 0;
 let versionClickTimer = null;
 
@@ -243,7 +245,51 @@ async function renderSiteLists() {
     );
 }
 
-function init(ctx) {
+// A network switch, made by the user here or saved by the background once the
+// user approved a site's request (src/popup/index.js), leaves every screen on
+// the page showing the previous network. These two leave the page as README's
+// Screen Map describes, the first before the switch is saved, so that save
+// keeps the cut for a popup closed straight after, the second once `state`
+// holds the new network.
+//
+// The stack is cut at the first screen that cannot be rendered from saved
+// state, such as Send or AddToken, and at AddressToken unless it shows the
+// native token: any other token there was picked on the previous network, so
+// it is no longer selected either. Without a wallet the stack starts at
+// Welcome, which that cut would drop, and Welcome shows nothing from a network.
+function cutViewStack() {
+    if (!state.hasWallet) return;
+    if (state.selectedToken !== "ETH") {
+        const tokenView = state.viewStack.indexOf("address-token");
+        if (tokenView !== -1) {
+            state.viewStack = state.viewStack.slice(0, tokenView);
+        }
+        state.selectedToken = null;
+    }
+    state.viewStack = restorableStack(state.viewStack, state.currentView);
+}
+
+// Every screen counts as not yet rendered, so "Back" renders the one it lands
+// on for the new network. Settings on top is brought up to date in place;
+// any other screen is drawn again as a reopened popup draws it, which is Home
+// for one that cannot be rendered from saved state. Without a wallet any other
+// screen is Welcome or AddWallet, which show nothing from a network.
+function showNewNetwork() {
+    resetRenderedViews();
+    if (state.currentView === "settings") {
+        markViewRendered("settings");
+        $("settings-network").value = state.networkId;
+        $("settings-rpc").value = state.rpcUrl;
+        $("settings-blockscout").value = state.blockscoutUrl;
+        renderTrackedTokens();
+    } else if (state.hasWallet) {
+        ctx.restoreView();
+    }
+    updateDebugBanner(state.currentView);
+}
+
+function init(_ctx) {
+    ctx = _ctx;
     deleteWallet.init(ctx);
     showPhrase.init();
 
@@ -319,37 +365,18 @@ function init(ctx) {
 
     const networkSelect = $("settings-network");
     networkSelect.addEventListener("change", async () => {
+        // Whether `state` already has the network picked is asked only once
+        // the switch holds the lock: while an earlier pick waits for it,
+        // `state` still has the network before that pick, and a pick back to
+        // that network must still be made.
         const newId = networkSelect.value;
-        if (newId === state.networkId) return;
-        // The screens beneath Settings show the previous network, so Back
-        // finds them as it does in a reopened popup: each is rendered again
-        // when Back lands on it, and the stack is cut at the first one that
-        // cannot be rendered from saved state, such as Send or AddToken. It
-        // is cut at AddressToken too, unless that shows the native token: any
-        // other token there was picked on the previous network. Without a
-        // wallet the stack starts at Welcome, which that cut would drop, and
-        // Welcome shows nothing from a network. The cut comes before the
-        // switch so that the switch's save keeps it for a popup closed
-        // straight after.
-        if (state.hasWallet) {
-            const tokenView = state.viewStack.indexOf("address-token");
-            if (tokenView !== -1 && state.selectedToken !== "ETH") {
-                state.viewStack = state.viewStack.slice(0, tokenView);
-            }
-            state.viewStack = restorableStack(state.viewStack, "settings");
-        }
+        cutViewStack();
         const net = await onChainSwitch(newId);
+        if (!net) return;
         // Open pages are told by the background, as after a site's approved
         // switch request.
         notify({ type: "AUTISTMASK_NETWORK_CHANGED", chainId: net.chainId });
-        resetRenderedViews();
-        // Settings itself, and the testnet banner above it, are brought up
-        // to date for the new network here.
-        markViewRendered("settings");
-        $("settings-rpc").value = state.rpcUrl;
-        $("settings-blockscout").value = state.blockscoutUrl;
-        renderTrackedTokens();
-        updateDebugBanner(state.currentView);
+        showNewNetwork();
         showFlash("Switched to " + net.name + ".");
     });
 
@@ -484,4 +511,10 @@ function init(ctx) {
     });
 }
 
-module.exports = { init, show, renderSiteLists };
+module.exports = {
+    init,
+    show,
+    renderSiteLists,
+    cutViewStack,
+    showNewNetwork,
+};

src/shared/balances.js

@@ -1,4 +1,5 @@
-// Balance fetching: ETH balances via RPC, ERC-20 token balances via
+// Balance fetching: ETH balances and the balances of the tokens the user
+// tracks via RPC, the other ERC-20 token balances and the holder counts via
 // Blockscout, ENS reverse lookup via RPC.
 
 const {
@@ -81,7 +82,9 @@ function rawUnits(value) {
 // Fetch token balances for a single address from Blockscout.
 // Returns [{ address, name, symbol, decimals, balance, holders }].
 // Filters out spam: only shows tokens that are in the known token list,
-// explicitly tracked by the user, or have >= 1000 holders.
+// explicitly tracked by the user, or have >= 1000 holders. A tracked token's
+// balance is read through the RPC endpoint instead, and its row here gives that
+// entry its holder count and `decimals` (fetchTrackedTokenBalances()).
 //
 // `decimals` and `balance` are each null when the answer is unknown, the same
 // way `holders` already is. Absence is never filled in here: this is the
@@ -205,8 +208,96 @@ async function fetchTokenBalances(
     }
 }
 
-// Fetch ETH balances, ENS names, and ERC-20 token balances for all addresses.
+// The entries at `address` of the tokens the user tracks, shaped as
+// fetchTokenBalances() returns them, for the tokens the address holds.
+//
+// The balance is read with balanceOf through the RPC endpoint. The name and
+// symbol are the tracked token's. `decimals` and `holders` are those of
+// Blockscout's entry for the token in `explorerRequest`, this refresh's
+// fetchTokenBalances() for the address; while Blockscout fails they are kept
+// from the token's entry in `previous`, the address's entries before this
+// refresh. The balance is stated at the scale the screens read the token at
+// (resolveTokenDecimals()): the bundled list's, then the one the tracked token
+// records, then Blockscout's, as in fetchTokenBalances().
+//
+// A token whose balanceOf fails keeps its entry in `previous`, as a failed ETH
+// balance keeps its figure, or takes Blockscout's entry from this refresh when
+// it has none. The failure is logged. A balance of zero gets no entry, as a
+// zero Blockscout reports gets none: the balance lists take a tracked token's
+// zero from the tracked list. A token whose symbol the spoof rule refuses gets
+// no entry either, as in fetchTokenBalances().
+//
 // `signal` is as for fetchTokenBalances().
+async function fetchTrackedTokenBalances(
+    provider,
+    address,
+    trackedTokens,
+    previous,
+    explorerRequest,
+    signal,
+) {
+    const listed = trackedTokens.filter(
+        (token) => !isSpoofedSymbol(token.symbol, token.address),
+    );
+    // Each token's balanceOf answer, or null where it failed.
+    const balances = await Promise.all(
+        listed.map(async (token) => {
+            try {
+                const contract = new Contract(
+                    token.address,
+                    ERC20_ABI,
+                    provider,
+                );
+                return await contract.balanceOf(address);
+            } catch (e) {
+                if (!signal?.aborted) {
+                    log.errorf(
+                        "token balance failed",
+                        address,
+                        token.address,
+                        e.shortMessage || e.message,
+                    );
+                }
+                return null;
+            }
+        }),
+    );
+    const explorerRows = await explorerRequest;
+    const reported = explorerRows ?? previous;
+
+    const rows = [];
+    listed.forEach((token, i) => {
+        const lower = token.address.toLowerCase();
+        const entryIn = (list) =>
+            list.find((row) => String(row.address).toLowerCase() === lower);
+        const raw = balances[i];
+        if (raw === null) {
+            const kept = entryIn(previous) || entryIn(explorerRows || []);
+            if (kept) rows.push(kept);
+            return;
+        }
+        if (raw === 0n) return;
+        const entry = entryIn(reported);
+        const decimals = entry ? entry.decimals : null;
+        const known = resolveTokenDecimals(lower, { trackedTokens });
+        const scale = known !== null ? known : decimals;
+        rows.push({
+            address: token.address,
+            name: token.name || "",
+            symbol: token.symbol || "???",
+            decimals: decimals,
+            // null when nothing knows the scale: a holding whose amount
+            // cannot be stated, never a zero.
+            balance: scale === null ? null : formatTokenBalance(raw, scale),
+            holders: entry ? entry.holders : null,
+        });
+    });
+    return rows;
+}
+
+// Fetch ETH balances, ENS names, and ERC-20 token balances for all addresses.
+// `trackedTokens` are the tokens tracked on the active network. `signal` is as
+// for fetchTokenBalances().
 async function refreshBalances(
     wallets,
     rpcUrl,
@@ -217,6 +308,8 @@ async function refreshBalances(
 ) {
     log.debugf("refreshBalances start, rpc:", urlOrigin(rpcUrl));
     const provider = getProvider(rpcUrl, networkId);
+    const tracked = trackedTokens || [];
+    const trackedSet = new Set(tracked.map((t) => t.address.toLowerCase()));
     const updates = [];
 
     for (const wallet of wallets) {
@@ -266,23 +359,42 @@ async function refreshBalances(
                     }),
             );
 
-            // ERC-20 token balances via Blockscout
+            // ERC-20 token balances: the tracked tokens' through the RPC
+            // endpoint, and from Blockscout the tokens the user has not
+            // tracked. When Blockscout fails, the untracked rows from before
+            // this refresh stay. The Blockscout request is started first and
+            // handed to fetchTrackedTokenBalances() too, which waits for it
+            // after sending its balanceOf reads, so the two run side by side.
+            const previous = addr.tokenBalances || [];
+            const explorerRequest = fetchTokenBalances(
+                addr.address,
+                blockscoutUrl,
+                tracked,
+                signal,
+            );
             updates.push(
-                fetchTokenBalances(
-                    addr.address,
-                    blockscoutUrl,
-                    trackedTokens,
-                    signal,
-                ).then((balances) => {
-                    if (balances !== null) {
-                        addr.tokenBalances = balances;
-                        log.debugf(
-                            "Token balances",
-                            addr.address,
-                            balances.length,
-                            "tokens",
-                        );
-                    }
+                Promise.all([
+                    fetchTrackedTokenBalances(
+                        provider,
+                        addr.address,
+                        tracked,
+                        previous,
+                        explorerRequest,
+                        signal,
+                    ),
+                    explorerRequest,
+                ]).then(([trackedRows, explorerRows]) => {
+                    const untrackedRows = (explorerRows ?? previous).filter(
+                        (row) =>
+                            !trackedSet.has(String(row.address).toLowerCase()),
+                    );
+                    addr.tokenBalances = trackedRows.concat(untrackedRows);
+                    log.debugf(
+                        "Token balances",
+                        addr.address,
+                        addr.tokenBalances.length,
+                        "tokens",
+                    );
                 }),
             );
         }

src/shared/browserApi.js

@@ -224,6 +224,19 @@ function storageRemove(keys) {
     return Promise.resolve(storage.remove(keys));
 }
 
+/**
+ * Call `listener` after every write to `storage.local`, whether this page,
+ * another page or the background made it, with what the write changed, as the
+ * browser reports it: `{ [key]: { oldValue, newValue } }`.
+ *
+ * @param {function(Object): void} listener
+ */
+function onStorageChanged(listener) {
+    namespaceMember("storage").onChanged.addListener((changes, areaName) => {
+        if (areaName === "local") listener(changes);
+    });
+}
+
 /**
  * Run `fn` while holding the browser's lock called `name`
  * (`navigator.locks`), and settle as `fn` settles. Every page of the extension
@@ -385,6 +398,7 @@ module.exports = {
     getPlatformInfo,
     hasBrowserNamespace,
     notify,
+    onStorageChanged,
     runtimeApi,
     sendMessage,
     sessionStorageGet,

src/shared/chainSwitch.js

@@ -1,8 +1,18 @@
-// Consolidated chain-switch handler for the popup.
+// The popup's network switch.
 //
-// Every state change required when the active network changes is
-// performed here so that callers (settings UI, future chain additions) all go
-// through a single code path.
+// A network switch reaches the popup's `state` in one of two ways:
+//
+// - onChainSwitch() below makes the switch the user picks in Settings, with
+//   applyChainSwitchFields() (chainSwitchFields.js).
+// - followNetworkSwitch() in src/popup/index.js takes a switch the background
+//   or another popup page saved, from the stored record, with
+//   takeStoredNetwork() (state.js), which copies it with
+//   copyChainSwitchFields() (chainSwitchFields.js).
+//
+// Both change `state` inside a save, holding the lock, and both reset the
+// popup's own caches through clearPopupCaches(), so a reset added there
+// reaches both. A field applyChainSwitchFields() sets has to be copied by
+// copyChainSwitchFields() too.
 //
 // Adding a new chain (e.g. ETC) requires only a new entry in
 // networks.js — no per-caller wiring is needed.
@@ -20,22 +30,32 @@
 const { applyChainSwitchFields } = require("./chainSwitchFields");
 const { clearPrices } = require("./prices");
 
+// The popup's own caches a network switch resets. Prices are chain-specific
+// (testnet tokens are worthless, ETC has different pricing, etc.). In-memory
+// and per bundle, so this is the popup's own cache — the only context that
+// ever fills it.
+function clearPopupCaches() {
+    clearPrices();
+}
+
 // Switch the active chain and reset all chain-specific cached state.
-// Returns the network configuration object for the new chain.
+// Returns the network configuration object for the new chain, or null when
+// `state` already has that network once the save holds the lock, and nothing
+// is switched.
+//
+// `state` is switched inside the save that stores the switch, holding the
+// lock, so it is never switched while a follow of a switch saved elsewhere
+// waits for the lock (followNetworkSwitch() in src/popup/index.js): that
+// follow runs first, and this switch is made after it.
 async function onChainSwitch(newNetworkId) {
     const { state, saveState } = require("./state");
-
-    const net = applyChainSwitchFields(state, newNetworkId);
-
-    // --- price cache ---
-    // Prices are chain-specific (testnet tokens are worthless,
-    // ETC has different pricing, etc.). In-memory and per bundle, so this is
-    // the popup's own cache — the only context that ever fills it.
-    clearPrices();
-
-    await saveState();
-
+    let net = null;
+    await saveState(() => {
+        if (state.networkId === newNetworkId) return false;
+        net = applyChainSwitchFields(state, newNetworkId);
+        clearPopupCaches();
+    });
     return net;
 }
 
-module.exports = { onChainSwitch };
+module.exports = { onChainSwitch, clearPopupCaches };

src/shared/chainSwitchFields.js

@@ -7,7 +7,7 @@
 // the singleton and saves; the background applies it to the detached record of
 // its own read-modify-write (src/background/state.js).
 //
-// Everything here is synchronous and touches nothing but the object it is
+// Everything here is synchronous and touches nothing but the objects it is
 // given: no storage, no caches, no imports beyond the network table. That is
 // what makes it usable on a record that has been read fresh from storage
 // microseconds earlier and is about to be written back.
@@ -76,4 +76,33 @@ function applyChainSwitchFields(s, newNetworkId) {
     return net;
 }
 
-module.exports = { applyChainSwitchFields };
+// Give `s` every field applyChainSwitchFields() sets, as `switched` holds it:
+// the popup takes a switch the background saved from the stored record this
+// way, rather than performing it again (takeStoredNetwork() in
+// src/shared/state.js). Balances are taken by address, and an address
+// `switched` does not have keeps none.
+function copyChainSwitchFields(s, switched) {
+    s.networkEndpoints = switched.networkEndpoints;
+    s.networkTrackedTokens = switched.networkTrackedTokens;
+    s.trackedTokens = switched.trackedTokens;
+    s.networkId = switched.networkId;
+    s.rpcUrl = switched.rpcUrl;
+    s.blockscoutUrl = switched.blockscoutUrl;
+    s.lastBalanceRefresh = switched.lastBalanceRefresh;
+    s.tokenHolderCache = switched.tokenHolderCache;
+    s.fraudContracts = switched.fraudContracts;
+
+    const stored = new Map();
+    for (const wallet of switched.wallets) {
+        for (const addr of wallet.addresses) stored.set(addr.address, addr);
+    }
+    for (const wallet of s.wallets) {
+        for (const addr of wallet.addresses) {
+            const got = stored.get(addr.address);
+            addr.balance = got ? got.balance : "0";
+            addr.tokenBalances = got ? got.tokenBalances : [];
+        }
+    }
+}
+
+module.exports = { applyChainSwitchFields, copyChainSwitchFields };

src/shared/state.js

@@ -23,6 +23,7 @@
 // guarantee.
 
 const { networkById } = require("./networks");
+const { copyChainSwitchFields } = require("./chainSwitchFields");
 const {
     DEFAULT_STATE,
     PERSISTED_FIELDS,
@@ -125,8 +126,10 @@ function currentNetwork() {
 }
 
 // The persisted fields as this page held them when its last loadState()
-// finished, or when its last successful saveState() began. saveState() diffs
-// the live state against this to find only the fields THIS page changed since.
+// finished, or when its last successful saveState() began, with any network
+// switch saved elsewhere that this page has taken since (takeStoredNetwork()).
+// saveState() diffs the live state against this to find only the fields THIS
+// page changed since.
 //
 // Deep-cloned, not a reference: callers mutate persisted objects and arrays
 // in place (state.wallets.push(...)), and a reference baseline would mutate
@@ -466,7 +469,9 @@ function mergeNetworkEndpoints(base, ours, theirs) {
 // exists to remove, just delayed and confined to one page instead of two
 // (caught by tests/txStatus.test.js). A page's live picture of a field it
 // does not own goes on being whatever its last loadState() saw, same as
-// before this fix; only the persisted record is guaranteed current.
+// before this fix; only the persisted record is guaranteed current. The
+// network is the exception: the popup takes a switch another context saved
+// through `beforeWrite` (followNetworkSwitch() in src/popup/index.js).
 async function saveStateOnce(beforeWrite) {
     const result = await storageGet("autistmask");
     // The record in storage right now is about to be merged into and written
@@ -597,6 +602,17 @@ function saveState(beforeWrite) {
     return turn;
 }
 
+// Give this page the network switch held by `stored`, a record a save of this
+// page has just read (followNetworkSwitch() in src/popup/index.js calls this
+// from `beforeWrite`), in `state` and in `baseline` alike, as loadState() does
+// with a whole record. The switch is then not this page's own change, even when
+// that save fails to write: a later switch back to the previous network still
+// differs from `baseline`, and is stored.
+function takeStoredNetwork(stored) {
+    copyChainSwitchFields(rawState, stored);
+    copyChainSwitchFields(baseline, structuredClone(stored));
+}
+
 // Rejects with StateUnusableError for a stored record this build cannot make
 // sense of. Nothing is assigned and `loaded` stays false in that case, so a
 // caller that ignores the rejection gets StateNotLoadedError on the first
@@ -642,6 +658,7 @@ module.exports = {
     state,
     saveState,
     onSaveFailure,
+    takeStoredNetwork,
     loadState,
     currentAddress,
     currentNetwork,

src/shared/uniswap.js

@@ -953,7 +953,9 @@ function totalAmount(amounts) {
 // 2. Amount is the amountIn of the swap action that spends Token In. If
 //    several exact-in actions spend it, each with a stated amount, it is
 //    their sum; in any other case there is none. Min. received is the same
-//    for amountOutMin and the actions that buy Token Out.
+//    for amountOutMin and the actions that buy Token Out, except that there
+//    is none when a swap action in the step also spends Token Out: the step
+//    then does not pay out all that those actions buy.
 // 3. If any swap action in the step cannot be read, only SETTLE, SETTLE_ALL,
 //    TAKE and TAKE_ALL name the sides, and there is no Amount or Min.
 //    received.
@@ -1187,11 +1189,13 @@ function decodeV4Swap(input) {
         const boughtOnly = currenciesNotIn(bought, spent);
         if (present(takeToken) || boughtOnly.length === 1) {
             tokenOut = present(takeToken) ? takeToken : boughtOnly[0];
-            amountOutMin = totalAmount(
-                swaps
-                    .filter((s) => s.tokenOut === tokenOut)
-                    .map((s) => s.amountOutMin),
-            );
+            if (!spent.includes(tokenOut)) {
+                amountOutMin = totalAmount(
+                    swaps
+                        .filter((s) => s.tokenOut === tokenOut)
+                        .map((s) => s.amountOutMin),
+                );
+            }
         }
 
         return {
@@ -1355,8 +1359,9 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         };
         // A PERMIT2_PERMIT or PERMIT2_PERMIT_BATCH at `step` whose input this
         // decoder cannot read may let any spender take any amount of any
-        // token: one line says so, and there is no Amount line, whose figure
-        // may then be too low.
+        // token: one line says so, there is no Amount line, whose figure may
+        // then be too low, and the minimum reads Min. paid out (see
+        // toAnotherSpender).
         const permitUnread = (step) => {
             permits.push({ token: null, amount: null, spender: null, step });
             stepsUnread.push(step);
@@ -2029,8 +2034,9 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         // Every other PERMIT2_PERMIT leaves Token In and the Amount line as
         // they read with no permit, and gets lines of its own below. A step
         // that may take from the sender what this decoder did not read leaves
-        // no figure, permit or not (see spentUnread()), and so does a permit
-        // or batch whose input it cannot read (see permitUnread()). An
+        // no figure, permit or not (see spentUnread()), and so do a permit
+        // or batch whose input it cannot read (see permitUnread()) and an
+        // allowance of Token In to another spender (see toAnotherSpender). An
         // EXECUTE_SUB_PLAN step leaves both sides unknown (below).
         const stepCommands = Array.from(
             commandsBytes,
@@ -2216,16 +2222,30 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
             return amountText(amount, info);
         };
 
+        // Each allowance to a spender other than the router. Code that a step
+        // runs, such as a V4 pool's hook or a token's own code, can call that
+        // spender, which can then take up to the allowance from the sender
+        // before the transaction ends. A permit or batch this decoder could
+        // not read may be to any spender, of any token.
+        const toAnotherSpender = permits.filter(
+            (p) => !sameAddress(p.spender, toAddress),
+        );
+
         // A null token in `spentFromSender`, a step this decoder did not read
-        // or a token it does not know, and one in `permits`, a permit or
-        // batch it could not read, leave no Amount figure, which may then be
+        // or a token it does not know, and an allowance to another spender
+        // that may be of Token In, leave no Amount figure, which may then be
         // too low. With no Amount line, each take the total adds up gets
         // lines of its own, first, so that every amount this decoder read is
         // shown.
         if (
             present(inputAmount) &&
             spentFromSender.every((s) => present(s.token)) &&
-            permits.every((p) => present(p.token))
+            toAnotherSpender.every(
+                (p) =>
+                    present(p.token) &&
+                    present(inputToken) &&
+                    !sameAddress(p.token, inputToken),
+            )
         ) {
             const amount = spentText(inputAmount, inInfo);
             details.push({
@@ -2346,9 +2366,10 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         // step pays the bridge, when one moves the sender's tokens into the
         // router, when a token stays in the router, and when a payout could
         // not be read. The output is received by the sender only when some
-        // step pays the sender and there is no such line. When no step names
-        // anyone paid, one line says so. `paidTo` holds these lines and the
-        // token line after each line about a token in the router.
+        // step pays the sender, there is no such line, and no allowance goes
+        // to another spender (see toAnotherSpender). When no step names anyone
+        // paid, one line says so. `paidTo` holds these lines and the token
+        // line after each line about a token in the router.
         const outputHeld =
             present(outputToken) && heldByRouter.has(outputToken.toLowerCase());
         const paidTo = paidElsewhere.map((address) => ({
@@ -2395,7 +2416,10 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         if (payeeUnread) {
             paidTo.push({ label: "Paid to", value: UNDECODED_CURRENCY });
         }
-        const received = paidToSender && paidTo.length === 0;
+        const received =
+            paidToSender &&
+            paidTo.length === 0 &&
+            toAnotherSpender.length === 0;
         if (!paidToSender && paidTo.length === 0) {
             paidTo.push({ label: "Paid to", value: UNNAMED_CURRENCY });
         }

tests/balanceRefreshCancelled.test.js

@@ -18,6 +18,11 @@ const {
 const RPC_URL = "https://rpc.example.invalid";
 const EXPLORER_URL = "https://explorer.example.invalid/api/v2";
 const ADDRESS = "0x1111111111111111111111111111111111111111";
+const TRACKED = {
+    address: "0x7777777777777777777777777777777777777777",
+    symbol: "TRK",
+    decimals: 6,
+};
 
 const realFetch = globalThis.fetch;
 let logged;
@@ -30,9 +35,9 @@ beforeEach(() => {
     const failedToFetch = async () => {
         throw new TypeError("Failed to fetch");
     };
-    // The RPC calls (ETH balance, ENS name, and the scan's balance and
-    // transaction count) and the explorer request (token balances) all fail
-    // the same way.
+    // The RPC calls (ETH balance, ENS name, the tracked token's balance, and
+    // the scan's balance and transaction count) and the explorer request (the
+    // other token balances) all fail the same way.
     FetchRequest.registerGetUrl(failedToFetch);
     globalThis.fetch = jest.fn(failedToFetch);
 });
@@ -49,7 +54,7 @@ function refresh(signal) {
         wallets,
         RPC_URL,
         EXPLORER_URL,
-        [],
+        [TRACKED],
         "mainnet",
         signal,
     );
@@ -60,6 +65,7 @@ test("a failure while the popup is open is reported", async () => {
     for (const label of [
         "ETH balance failed",
         "ENS reverse failed",
+        "token balance failed",
         "fetchTokenBalances failed: Failed to fetch",
     ]) {
         expect(logged.some((line) => line.includes(label))).toBe(true);

tests/balanceRefreshNetworkSwitch.test.js

@@ -97,9 +97,9 @@ test("a refresh that returns after a switch in Settings writes nothing, and the
     );
 });
 
-// The stored record still holds Ethereum Mainnet while the refresh's save reads
-// it, so only this page's own network shows the switch.
-test("a refresh whose save is reading the stored record when the user switches in Settings writes nothing", async () => {
+// The switch is made only once the refresh's save, holding the lock, has
+// written Ethereum Mainnet's balances, and the switch then clears them.
+test("a refresh whose save is reading the stored record when the user switches in Settings leaves none of its balances stored", async () => {
     const page = await bootPopup(unversionedValidProfile());
     expect(page.pageErrors).toEqual([]);
     const { state } = require("../src/shared/state");
@@ -145,7 +145,8 @@ test("a refresh that returns after the background switched the network writes no
 
     const refresh = await holdRefresh(page);
     // The background writes the switch to Sepolia, as its updateState() does
-    // once the user approves a site's request. This page is not told.
+    // once the user approves a site's request. This page is not told of it
+    // yet.
     const record = page.storage.read("autistmask");
     applyChainSwitchFields(record, "sepolia");
     page.storage.write("autistmask", record);

tests/chainSwitchGate.test.js

@@ -446,7 +446,10 @@ describe("switching the network in Settings tells every open tab", () => {
         global.chrome.runtime.sendMessage = (msg) => {
             bg.send(msg, POPUP);
         };
-        await require("../src/shared/state").loadState();
+        const { state, loadState } = require("../src/shared/state");
+        await loadState();
+        // Set by showView(), which is mocked above.
+        state.currentView = "settings";
         require("../src/popup/views/settings").init({
             pageClosed: new AbortController().signal,
         });

tests/e2e/firefox/run.js

@@ -867,6 +867,14 @@ step(
             "the page was not told of the approved switch: " +
                 JSON.stringify(events),
         );
+        // The popup, open all along, shows the new network
+        // (https://git.eeqj.de/sneak/AutistMask/issues/650).
+        await d.switchToWindow(env.popupWindow);
+        await d.waitFor(
+            "the open popup to show the testnet banner",
+            `const banner = document.getElementById("debug-banner");
+             return banner !== null && banner.textContent === "[TESTNET]";`,
+        );
 
         await openNetworkPrompt(env, "switch-restore", sepolia, mainnet);
         await d.click("#btn-approve-network");
@@ -881,6 +889,10 @@ step(
             isDeepStrictEqual(await storedNetwork(env), before),
             "switching back did not restore the mainnet network and endpoints",
         );
+        await d.waitFor(
+            "the open popup to drop the testnet banner",
+            `return document.getElementById("debug-banner") === null;`,
+        );
         await d.switchToWindow(env.dappWindow);
     },
 );

tests/e2e/run.js

@@ -3480,6 +3480,24 @@ function hostileSymbolState(page, tokenAddress) {
 }
 
 test("a token whose symbol() returns markup renders as text (#307)", async (env) => {
+    // The stub token is no longer tracked from here on, so the explorer is
+    // what lists it, as it lists a token airdropped to the victim. A tracked
+    // token is listed from the RPC endpoint under the symbol it was added
+    // with, which the hostile symbol below never reaches
+    // (https://git.eeqj.de/sneak/AutistMask/issues/669).
+    await env.page.click("#btn-settings");
+    await visible(env.page, "#view-settings");
+    await env.page.click("#settings-tracked-tokens .btn-remove-token");
+    // The list is drawn again once the removal is saved.
+    await env.page.waitForFunction(
+        () =>
+            document
+                .getElementById("settings-tracked-tokens")
+                .innerText.trim() === "None",
+    );
+    await env.page.click("#btn-settings-back");
+    await visible(env.page, "#view-address");
+
     env.routeOpts.ethBalanceWei = toHexWei(FUNDED_ETH_WEI);
     env.routeOpts.seedTokenBalance = true;
     env.routeOpts.tokenSymbolOverride = HOSTILE_SYMBOL;
@@ -4865,6 +4883,12 @@ test("a site's network switch changes nothing until the user approves it (#408)"
         "the page was not told of the approved switch: " +
             JSON.stringify(events),
     );
+    // The popup, open all along, shows the new network
+    // (https://git.eeqj.de/sneak/AutistMask/issues/650).
+    await env.page.waitForFunction(() => {
+        const banner = document.getElementById("debug-banner");
+        return banner !== null && banner.textContent === "[TESTNET]";
+    });
 
     const restored = await openNetworkPrompt(
         env,
@@ -4886,6 +4910,9 @@ test("a site's network switch changes nothing until the user approves it (#408)"
         isDeepStrictEqual(await storedNetwork(env.page), before),
         "switching back did not restore the mainnet network and endpoints",
     );
+    await env.page.waitForFunction(
+        () => document.getElementById("debug-banner") === null,
+    );
 });
 
 // Switching the network in Settings tells the page too, as an approved site

tests/popupFollowsNetworkSwitch.test.js

@@ -0,0 +1,300 @@
+// An open popup follows a network switch the background saves once the user
+// approves a site's request: it takes the new network from the stored record
+// and draws the screen it is on for it, as a switch in Settings does
+// (https://git.eeqj.de/sneak/AutistMask/issues/650). Driven through the real
+// popup over a stored profile on Ethereum Mainnet. The background's write is
+// the storage stub's set, which the stub reports to the page as the browser
+// does.
+
+const {
+    bootPopup,
+    cleanupPopup,
+    unversionedValidProfile,
+    TOKEN_ADDRESS,
+} = require("./support/popupBoot");
+const { makeStorageStub } = require("./support/storageStub");
+const {
+    applyChainSwitchFields,
+    copyChainSwitchFields,
+} = require("../src/shared/chainSwitchFields");
+const { NETWORKS } = require("../src/shared/networks");
+const { STATE_SCHEMA_VERSION } = require("../src/shared/stateSchema");
+
+afterEach(() => {
+    cleanupPopup();
+});
+
+const SEPOLIA_TOKEN = {
+    address: TOKEN_ADDRESS,
+    symbol: "TST",
+    decimals: 18,
+    name: "Test Token",
+};
+const MAINNET_TOKEN = {
+    address: "0x6B175474E89094C44Da98b954EedeAC495271d0F",
+    symbol: "DAI",
+    decimals: 18,
+    name: "Dai Stablecoin",
+};
+
+// A profile on Ethereum Mainnet that reopens the popup onto AddressDetail,
+// with DAI tracked there and TST tracked on Sepolia.
+function profileOnAddress() {
+    return unversionedValidProfile({
+        currentView: "address",
+        viewStack: ["main"],
+        selectedWallet: 0,
+        selectedAddress: 0,
+        trackedTokens: [MAINNET_TOKEN],
+        networkTrackedTokens: { sepolia: [SEPOLIA_TOKEN] },
+    });
+}
+
+// The popup reopened onto it.
+function bootOnAddress() {
+    return bootPopup(profileOnAddress());
+}
+
+// The background saves a switch to `networkId`, as its updateState() does
+// once the user approves a site's request.
+async function backgroundSwitch(page, networkId) {
+    const record = page.storage.read("autistmask");
+    applyChainSwitchFields(record, networkId);
+    await page.storage.local.set({ autistmask: record });
+    await page.settle();
+    await page.settle();
+}
+
+test("the popup open on AddressDetail shows the new network and its balances", async () => {
+    const page = await bootOnAddress();
+    expect(page.pageErrors).toEqual([]);
+    expect(page.visibleViews()).toEqual(["address"]);
+    expect(page.node("address-balances").innerHTML).toContain("DAI");
+    expect(page.node("debug-banner")).toBeNull();
+
+    await backgroundSwitch(page, "sepolia");
+
+    const { state } = require("../src/shared/state");
+    expect(state.networkId).toBe("sepolia");
+    expect(state.rpcUrl).toBe(NETWORKS.sepolia.defaultRpcUrl);
+    expect(page.visibleViews()).toEqual(["address"]);
+    const balances = page.node("address-balances").innerHTML;
+    expect(balances).toContain("TST");
+    expect(balances).toContain("SepoliaETH");
+    expect(balances).not.toContain("DAI");
+    expect(page.text("debug-banner")).toBe("[TESTNET]");
+
+    // Its next refresh runs on Sepolia, and what it fetched is stored.
+    await page.tick();
+    const { refreshBalances } = require("../src/shared/balances");
+    expect(refreshBalances.mock.lastCall[4]).toBe("sepolia");
+    const stored = page.storage.read("autistmask");
+    expect(stored.networkId).toBe("sepolia");
+    expect(stored.lastBalanceRefresh).toBeGreaterThan(0);
+});
+
+test("the popup open on Settings shows the new network, and Back draws the screen beneath for it", async () => {
+    const page = await bootOnAddress();
+    await page.click("btn-settings");
+    expect(page.visibleViews()).toEqual(["settings"]);
+
+    await backgroundSwitch(page, "sepolia");
+
+    expect(page.visibleViews()).toEqual(["settings"]);
+    expect(page.value("settings-network")).toBe("sepolia");
+    expect(page.value("settings-rpc")).toBe(NETWORKS.sepolia.defaultRpcUrl);
+    expect(page.node("settings-tracked-tokens").innerHTML).toContain("TST");
+    expect(page.text("debug-banner")).toBe("[TESTNET]");
+
+    await page.click("btn-settings-back");
+    expect(page.visibleViews()).toEqual(["address"]);
+    expect(page.node("address-balances").innerHTML).not.toContain("DAI");
+});
+
+// Neither can be drawn again for the new network: Send cannot be rendered from
+// saved state, and DAI was picked on Ethereum Mainnet, where alone it is
+// tracked. A reopened popup goes to Home in their place.
+test.each([
+    ["Send", (page) => page.click("btn-send")],
+    [
+        "AddressToken for DAI",
+        async (page) => {
+            const { state } = require("../src/shared/state");
+            state.selectedToken = MAINNET_TOKEN.address;
+            require("../src/popup/views/helpers").pushCurrentView();
+            require("../src/popup/views/addressToken").show();
+            await page.settle();
+        },
+    ],
+])("the popup open on %s goes to Home", async (_view, open) => {
+    const page = await bootOnAddress();
+    await open(page);
+    expect(page.visibleViews()).not.toEqual(["address"]);
+
+    await backgroundSwitch(page, "sepolia");
+
+    expect(page.visibleViews()).toEqual(["main"]);
+    expect(page.text("total-value")).toBe("0.0000 SepoliaETH");
+});
+
+// The report of the switch's own save names the network the page already has.
+test("a switch in Settings is not taken a second time when its save is reported", async () => {
+    const page = await bootOnAddress();
+    await page.click("btn-settings");
+    const { get, set } = page.storage.local;
+    const reads = get.mock.calls.length;
+    const writes = set.mock.calls.length;
+
+    const select = page.node("settings-network");
+    select.value = "sepolia";
+    for (const fn of select.listeners.change) await fn();
+    await page.settle();
+    await page.settle();
+
+    expect(get).toHaveBeenCalledTimes(reads + 1);
+    expect(set).toHaveBeenCalledTimes(writes + 1);
+    expect(page.text("flash-msg")).toBe("Switched to Sepolia Testnet.");
+});
+
+// The background saves the switch once the popup has read the stored record
+// and before it listens for changes to it, so the browser tells the page
+// nothing of it. Nor is any later write reported here: Chrome reports none
+// that leaves the record as it was, such as the popup's own save at start-up.
+test("a switch saved while the popup opens, before it listens for one, is followed", async () => {
+    const storage = makeStorageStub({ autistmask: profileOnAddress() });
+    storage.onChanged = { addListener: () => {} };
+    const read = storage.local.get.getMockImplementation();
+    storage.local.get.mockImplementationOnce(async (key) => {
+        const loaded = await read(key);
+        const record = storage.read("autistmask");
+        applyChainSwitchFields(record, "sepolia");
+        storage.write("autistmask", record);
+        return loaded;
+    });
+    const page = await bootPopup(undefined, { storage });
+    await page.settle();
+
+    const { state } = require("../src/shared/state");
+    expect(page.pageErrors).toEqual([]);
+    expect(state.networkId).toBe("sepolia");
+    expect(page.visibleViews()).toEqual(["address"]);
+    expect(page.node("address-balances").innerHTML).toContain("SepoliaETH");
+    expect(page.text("debug-banner")).toBe("[TESTNET]");
+});
+
+// While the popup's follow of the background's switch to Sepolia waits for the
+// lock, the user picks Sepolia in Settings and then Ethereum Mainnet again. The
+// last pick is the network stored, and the last one sites are told of.
+test("a switch in Settings made while a follow waits for the lock is not overwritten by it", async () => {
+    const page = await bootOnAddress();
+    await page.click("btn-settings");
+
+    // Another write holds the lock, so every save of the page waits for it.
+    let releaseLock;
+    const lockHeld = navigator.locks.request(
+        "autistmask",
+        () =>
+            new Promise((resolve) => {
+                releaseLock = resolve;
+            }),
+    );
+    await backgroundSwitch(page, "sepolia");
+    const select = page.node("settings-network");
+    const picks = [];
+    for (const networkId of ["sepolia", "mainnet"]) {
+        select.value = networkId;
+        for (const fn of select.listeners.change) picks.push(fn());
+    }
+    releaseLock();
+    await lockHeld;
+    await Promise.all(picks);
+    await page.settle();
+
+    const { state } = require("../src/shared/state");
+    expect(state.networkId).toBe("mainnet");
+    expect(page.storage.read("autistmask").networkId).toBe("mainnet");
+    expect(page.value("settings-network")).toBe("mainnet");
+    const told = globalThis.chrome.runtime.sendMessage.mock.calls
+        .map(([message]) => message)
+        .filter((message) => message.type === "AUTISTMASK_NETWORK_CHANGED");
+    expect(told.at(-1).chainId).toBe(NETWORKS.mainnet.chainId);
+});
+
+// The popup follows the background's switch to Sepolia, but its own write in
+// that save fails. The user then picks Ethereum Mainnet in Settings, the
+// network the popup was on before: that switch is stored, and only then
+// flashed and sent to sites.
+test("a switch back in Settings after a follow whose write failed is stored", async () => {
+    const page = await bootOnAddress();
+    await page.click("btn-settings");
+    const { set } = page.storage.local;
+    const write = set.getMockImplementation();
+    // The background's write lands; the next, the follow's, fails.
+    set.mockImplementationOnce(write).mockRejectedValueOnce(
+        new Error("quota exceeded"),
+    );
+    await backgroundSwitch(page, "sepolia");
+    const { state } = require("../src/shared/state");
+    expect(state.networkId).toBe("sepolia");
+
+    const select = page.node("settings-network");
+    select.value = "mainnet";
+    for (const fn of select.listeners.change) await fn();
+    await page.settle();
+
+    const stored = page.storage.read("autistmask");
+    expect(stored.networkId).toBe("mainnet");
+    expect(stored.rpcUrl).toBe(NETWORKS.mainnet.defaultRpcUrl);
+    expect(stored.trackedTokens).toEqual([MAINNET_TOKEN]);
+    expect(page.text("flash-msg")).toBe("Switched to Ethereum Mainnet.");
+    const told = globalThis.chrome.runtime.sendMessage.mock.calls
+        .map(([message]) => message)
+        .filter((message) => message.type === "AUTISTMASK_NETWORK_CHANGED");
+    expect(told.at(-1).chainId).toBe(NETWORKS.mainnet.chainId);
+});
+
+// Such as one a newer build wrote, which this build cannot read. Nothing reads
+// or writes the stored record for it: the popup's next save finds it, as
+// before.
+test("a record that names no network is not followed", async () => {
+    const page = await bootOnAddress();
+    const { get, set } = page.storage.local;
+    const reads = get.mock.calls.length;
+
+    await set({
+        autistmask: {
+            schemaVersion: STATE_SCHEMA_VERSION + 1,
+            wallets: [{ type: "hd", name: "Main", addresses: [] }],
+        },
+    });
+    await page.settle();
+
+    expect(get).toHaveBeenCalledTimes(reads);
+    expect(page.visibleViews()).toEqual(["address"]);
+});
+
+// A record that takes the switch from the switched record ends up as that
+// record, balances the background fetched since included.
+test("copyChainSwitchFields() takes every field applyChainSwitchFields() sets", () => {
+    const before = unversionedValidProfile({
+        trackedTokens: [MAINNET_TOKEN],
+        networkTrackedTokens: { sepolia: [SEPOLIA_TOKEN] },
+        networkEndpoints: {
+            sepolia: {
+                rpcUrl: "http://127.0.0.1:8545",
+                blockscoutUrl: "http://127.0.0.1:4000/api/v2",
+            },
+        },
+        lastBalanceRefresh: 1,
+        tokenHolderCache: { [MAINNET_TOKEN.address]: 5000 },
+        fraudContracts: ["0x1111111111111111111111111111111111111111"],
+    });
+    const switched = structuredClone(before);
+    applyChainSwitchFields(switched, "sepolia");
+    switched.wallets[0].addresses[0].balance = "2.0";
+
+    const follower = structuredClone(before);
+    copyChainSwitchFields(follower, switched);
+
+    expect(follower).toEqual(switched);
+});

tests/support/popupBoot.js

@@ -311,7 +311,7 @@ async function bootPopup(stored, options) {
     const windowListeners = {};
 
     globalThis.chrome = {
-        storage: { local: storage.local },
+        storage: { local: storage.local, onChanged: storage.onChanged },
         runtime: {
             sendMessage: jest.fn(async () => ({})),
             getURL: (p) => "chrome-extension://autistmask/" + p,

tests/support/storageStub.js

@@ -18,7 +18,9 @@
 // a storage stub by hand.
 
 // One storage area: get, set and remove over its own store, cloning both ways.
-function makeArea(store, tick) {
+// `changed` is handed what each set or remove changed, in the shape
+// storage.onChanged reports it.
+function makeArea(store, tick, changed) {
     const get = jest.fn(async (key) => {
         tick();
         if (key === undefined || key === null) return structuredClone(store);
@@ -34,14 +36,25 @@ function makeArea(store, tick) {
 
     const set = jest.fn(async (items) => {
         tick();
+        const changes = {};
         for (const k of Object.keys(items)) {
+            changes[k] = structuredClone({
+                oldValue: store[k],
+                newValue: items[k],
+            });
             store[k] = structuredClone(items[k]);
         }
+        changed(changes);
     });
 
     const remove = jest.fn(async (key) => {
         tick();
-        for (const k of Array.isArray(key) ? key : [key]) delete store[k];
+        const changes = {};
+        for (const k of Array.isArray(key) ? key : [key]) {
+            changes[k] = { oldValue: store[k] };
+            delete store[k];
+        }
+        changed(changes);
     });
 
     return { get, set, remove };
@@ -54,12 +67,22 @@ function makeArea(store, tick) {
 function makeStorageStub(initial, onOp) {
     const store = initial ? structuredClone(initial) : {};
     const tick = onOp || (() => {});
-    const local = makeArea(store, tick);
+    // storage.onChanged: after a set or remove has finished, every listener is
+    // called with what it changed and the area's name, as the browser calls
+    // them for a write by any page or the background.
+    const listeners = [];
+    const announce = (areaName) => (changes) => {
+        Promise.resolve().then(() => {
+            for (const fn of listeners) fn(structuredClone(changes), areaName);
+        });
+    };
+    const local = makeArea(store, tick, announce("local"));
 
     return {
         // Drop this straight in as chrome.storage.
         local,
-        session: makeArea({}, tick),
+        session: makeArea({}, tick, announce("session")),
+        onChanged: { addListener: (fn) => listeners.push(fn) },
         get: local.get,
         set: local.set,
         remove: local.remove,
@@ -71,7 +94,9 @@ function makeStorageStub(initial, onOp) {
                 ? structuredClone(store)
                 : structuredClone(store[key]),
         // Seed or replace a record without going through the module under
-        // test — for standing in as "another page wrote this".
+        // test — for standing in as "another page wrote this". Nothing is
+        // announced to storage.onChanged, so it also stands in for the time
+        // before the browser tells this page of such a write.
         write: (key, value) => {
             store[key] = structuredClone(value);
         },

tests/trackedTokenBalances.test.js

@@ -0,0 +1,303 @@
+// The balance of each token the user tracks is read with balanceOf through the
+// RPC endpoint, for every address. Blockscout's answer gives a tracked token its
+// holder count and decimals, and adds the tokens the user has not tracked
+// (https://git.eeqj.de/sneak/AutistMask/issues/669).
+//
+// The real refreshBalances() runs against a fake JSON-RPC node, answered
+// through ethers' own request hook, and a fake Blockscout, answered through
+// fetch().
+
+const { AbiCoder, FetchRequest } = require("ethers");
+const { refreshBalances } = require("../src/shared/balances");
+
+const RPC_URL = "https://rpc.example.invalid";
+const EXPLORER_URL = "https://explorer.example.invalid/api/v2";
+const FIRST = "0x1111111111111111111111111111111111111111";
+const SECOND = "0x2222222222222222222222222222222222222222";
+
+// A token the user tracks, outside the bundled list, at 6 decimals.
+const TOKEN = "0x7777777777777777777777777777777777777777";
+const TRACKED = {
+    address: TOKEN,
+    symbol: "TRK",
+    name: "Tracked Token",
+    decimals: 6,
+};
+
+// USDC, from the bundled list, which the user does not track.
+const USDC = "0xa0b86991c6218b36c1d19d4a2e9eb0ce3606eb48";
+// Neither on the bundled list nor tracked.
+const OTHER = "0x8888888888888888888888888888888888888888";
+
+const ZERO_WORD = "0x" + "0".repeat(64);
+const BALANCE_OF = "0x70a08231";
+
+// What balanceOf answers, by token contract and then by holder. A pair that is
+// not here makes balanceOf fail.
+let holdings;
+// What Blockscout answers for every address; null makes the request fail.
+let explorerRows;
+let logged;
+
+// One JSON-RPC answer. A call that is not balanceOf is the ENS reverse lookup,
+// answered with no resolver, so no name.
+function reply(req) {
+    const envelope = { jsonrpc: "2.0", id: req.id };
+    if (req.method === "eth_getBalance") {
+        return { ...envelope, result: "0x0" };
+    }
+    if (req.method !== "eth_call") {
+        return {
+            ...envelope,
+            error: { code: -32601, message: "method not found" },
+        };
+    }
+    const { to, data } = req.params[0];
+    if (!data.startsWith(BALANCE_OF)) return { ...envelope, result: ZERO_WORD };
+    const holder = "0x" + data.slice(-40);
+    const amount = (holdings[to.toLowerCase()] || {})[holder];
+    if (amount === undefined) {
+        return {
+            ...envelope,
+            error: { code: -32000, message: "fixture: balanceOf failed" },
+        };
+    }
+    return {
+        ...envelope,
+        result: AbiCoder.defaultAbiCoder().encode(["uint256"], [amount]),
+    };
+}
+
+const realFetch = globalThis.fetch;
+
+beforeEach(() => {
+    holdings = {};
+    explorerRows = null;
+    logged = [];
+    jest.spyOn(console, "error").mockImplementation((...args) => {
+        logged.push(args.map(String).join(" "));
+    });
+    FetchRequest.registerGetUrl(async (req) => {
+        const body = JSON.parse(Buffer.from(req.body).toString("utf8"));
+        const answer = Array.isArray(body) ? body.map(reply) : reply(body);
+        return {
+            statusCode: 200,
+            statusMessage: "OK",
+            headers: { "content-type": "application/json" },
+            body: Buffer.from(JSON.stringify(answer)),
+        };
+    });
+    globalThis.fetch = jest.fn(async () => {
+        if (explorerRows === null) throw new TypeError("Failed to fetch");
+        return { ok: true, status: 200, json: async () => explorerRows };
+    });
+});
+
+afterEach(() => {
+    FetchRequest.registerGetUrl(FetchRequest.createGetUrlFunc());
+    globalThis.fetch = realFetch;
+    jest.restoreAllMocks();
+});
+
+// One Blockscout token-balances row.
+function explorerRow(address, symbol, value, holders = "50000") {
+    return {
+        value: String(value),
+        token: {
+            type: "ERC-20",
+            address_hash: address,
+            symbol: symbol,
+            name: symbol,
+            decimals: "6",
+            holders_count: holders,
+        },
+    };
+}
+
+// The row refreshBalances() writes for TOKEN from a balanceOf answer, with the
+// decimals and holder count Blockscout reported for it, if any.
+function trackedRow(balance, decimals = null, holders = null) {
+    return {
+        address: TOKEN,
+        name: "Tracked Token",
+        symbol: "TRK",
+        decimals: decimals,
+        balance: balance,
+        holders: holders,
+    };
+}
+
+async function refresh(addresses, trackedTokens) {
+    await refreshBalances(
+        [{ addresses }],
+        RPC_URL,
+        EXPLORER_URL,
+        trackedTokens,
+        "mainnet",
+        new AbortController().signal,
+    );
+    return addresses;
+}
+
+test("with Blockscout failing, a tracked token's balance is read through the RPC endpoint for every address", async () => {
+    holdings[TOKEN] = { [FIRST]: 1234500000n, [SECOND]: 1n };
+    const [first, second] = await refresh(
+        [
+            { address: FIRST, tokenBalances: [] },
+            { address: SECOND, tokenBalances: [] },
+        ],
+        [TRACKED],
+    );
+    expect(first.tokenBalances).toEqual([trackedRow("1234.5")]);
+    // Exact, never cut: one base unit is not zero.
+    expect(second.tokenBalances).toEqual([trackedRow("0.000001")]);
+});
+
+test("with Blockscout failing, the untracked rows from before stay", async () => {
+    holdings[TOKEN] = { [FIRST]: 2000000n };
+    const usdc = {
+        address: USDC,
+        name: "USD Coin",
+        symbol: "USDC",
+        decimals: 6,
+        balance: "5.0",
+        holders: 50000,
+    };
+    const [first] = await refresh(
+        [{ address: FIRST, tokenBalances: [usdc] }],
+        [TRACKED],
+    );
+    expect(first.tokenBalances).toEqual([trackedRow("2.0"), usdc]);
+});
+
+test("a tracked token Blockscout also reports shows the RPC figure, and an untracked one is admitted as before", async () => {
+    holdings[TOKEN] = { [FIRST]: 2000000n };
+    explorerRows = [
+        explorerRow(TOKEN, "TRK", 9000000),
+        explorerRow(USDC, "USDC", 5000000),
+        // Too few holders, and neither on the bundled list nor tracked.
+        explorerRow(OTHER, "SPAM", 5000000, "10"),
+        // A known symbol from a contract it does not belong to.
+        explorerRow(OTHER, "USDC", 5000000),
+    ];
+    const [first] = await refresh(
+        [{ address: FIRST, tokenBalances: [] }],
+        [TRACKED],
+    );
+    expect(first.tokenBalances).toEqual([
+        trackedRow("2.0", 6, 50000),
+        {
+            address: USDC,
+            name: "USDC",
+            symbol: "USDC",
+            decimals: 6,
+            balance: "5.0",
+            holders: 50000,
+        },
+    ]);
+});
+
+test("a tracked token's entry carries the holder count and decimals Blockscout reports for it", async () => {
+    holdings[TOKEN] = { [FIRST]: 2000000n };
+    // Fewer holders than "Hide tokens with fewer than 1,000 holders" lets
+    // through to Send's token list.
+    explorerRows = [explorerRow(TOKEN, "TRK", 9000000, "10")];
+    const [first] = await refresh(
+        [{ address: FIRST, tokenBalances: [] }],
+        [TRACKED],
+    );
+    expect(first.tokenBalances).toEqual([trackedRow("2.0", 6, 10)]);
+});
+
+test("while Blockscout fails, a tracked token keeps the holder count and decimals of its entry from before", async () => {
+    holdings[TOKEN] = { [FIRST]: 2000000n };
+    const [first] = await refresh(
+        [{ address: FIRST, tokenBalances: [trackedRow("7.0", 6, 10)] }],
+        [TRACKED],
+    );
+    expect(first.tokenBalances).toEqual([trackedRow("2.0", 6, 10)]);
+});
+
+test("a failed balanceOf keeps the token's entry from before, and is logged", async () => {
+    explorerRows = [explorerRow(TOKEN, "TRK", 9000000)];
+    const before = trackedRow("7.0", 6, 50000);
+    const [first] = await refresh(
+        [{ address: FIRST, tokenBalances: [before] }],
+        [TRACKED],
+    );
+    expect(first.tokenBalances).toEqual([before]);
+    expect(logged.some((line) => line.includes("token balance failed"))).toBe(
+        true,
+    );
+});
+
+test("a failed balanceOf with no entry from before takes Blockscout's entry from this refresh", async () => {
+    // balanceOf fails at FIRST and answers at SECOND.
+    holdings[TOKEN] = { [SECOND]: 2000000n };
+    explorerRows = [explorerRow(TOKEN, "TRK", 9000000)];
+    const [first, second] = await refresh(
+        [
+            { address: FIRST, tokenBalances: [] },
+            { address: SECOND, tokenBalances: [] },
+        ],
+        [TRACKED],
+    );
+    expect(first.tokenBalances).toEqual([
+        {
+            address: TOKEN,
+            name: "TRK",
+            symbol: "TRK",
+            decimals: 6,
+            balance: "9.0",
+            holders: 50000,
+        },
+    ]);
+    // Where balanceOf answers, its figure stands.
+    expect(second.tokenBalances).toEqual([trackedRow("2.0", 6, 50000)]);
+});
+
+test("a balance of zero read through the RPC endpoint replaces the previous figure", async () => {
+    holdings[TOKEN] = { [FIRST]: 0n };
+    const [first] = await refresh(
+        [{ address: FIRST, tokenBalances: [trackedRow("7.0")] }],
+        [TRACKED],
+    );
+    expect(first.tokenBalances).toEqual([]);
+});
+
+test("a tracked token whose scale nothing knows gets no quantity, not a zero", async () => {
+    holdings[TOKEN] = { [FIRST]: 5n };
+    const [first] = await refresh(
+        [{ address: FIRST, tokenBalances: [] }],
+        [{ ...TRACKED, decimals: null }],
+    );
+    expect(first.tokenBalances).toEqual([trackedRow(null)]);
+});
+
+test("a tracked token whose scale only Blockscout reports is stated at that scale", async () => {
+    holdings[TOKEN] = { [FIRST]: 2000000n };
+    explorerRows = [explorerRow(TOKEN, "TRK", 9000000)];
+    const [first] = await refresh(
+        [{ address: FIRST, tokenBalances: [] }],
+        [{ ...TRACKED, decimals: null }],
+    );
+    expect(first.tokenBalances).toEqual([trackedRow("2.0", 6, 50000)]);
+});
+
+test("a tracked token wearing a known symbol from another contract is not listed", async () => {
+    holdings[OTHER] = { [FIRST]: 5000000n };
+    // Its entry from before goes too, although Blockscout fails.
+    const before = {
+        address: OTHER,
+        name: "Fake",
+        symbol: "USDC",
+        decimals: 6,
+        balance: "5.0",
+        holders: 50000,
+    };
+    const [first] = await refresh(
+        [{ address: FIRST, tokenBalances: [before] }],
+        [{ address: OTHER, symbol: "USDC", name: "Fake", decimals: 6 }],
+    );
+    expect(first.tokenBalances).toEqual([]);
+});

tests/trackedTokensPerNetwork.test.js

@@ -161,6 +161,7 @@ test("a token added by contract address on Sepolia is tracked on Sepolia only",
     );
     expect(stored().trackedTokens).toEqual([SEPOLIA_TOKEN]);
 
+    await boot.click("btn-settings");
     await chooseNetwork(boot, "mainnet");
     expect(stored().networkId).toBe("mainnet");
     expect(stored().trackedTokens).toEqual([MAINNET_TOKEN]);

tests/uniswap.test.js

@@ -1912,7 +1912,9 @@ describe("uniswap decoder", () => {
                         ],
                     ),
                 ],
-                first: USDT_400_GROUP,
+                // Nothing read says the user pays this step, so its 400 USDT
+                // gets no lines of its own.
+                first: [],
             },
             {
                 kind: "a V3 step of 600 USDT, then a V4 step whose input cannot be read",
@@ -2106,12 +2108,6 @@ describe("uniswap decoder", () => {
         const ONE_USDT_LINES = (spender) =>
             permitLines("1.0000 USDT", USDT_ADDR, "USDT", spender);
         test.each([
-            {
-                kind: "to another spender",
-                commands: [0x0a],
-                permits: [ONE_USDT_PERMIT(OTHER_ADDR)],
-                lines: ONE_USDT_LINES(OTHER_ADDR),
-            },
             {
                 kind: "that the router lets fail",
                 commands: [0x8a],
@@ -2548,20 +2544,6 @@ describe("uniswap decoder", () => {
                     ],
                     lines: USDT_600_LINES,
                 },
-                {
-                    kind: "a PERMIT2_PERMIT of 5,000 USDT to another spender, then a V3 exact-in of 600 USDT,",
-                    commands: [0x0a, 0x00],
-                    inputs: [
-                        encodePermit2(USDT_ADDR, USDT_5000, OTHER_ADDR),
-                        V3_600,
-                    ],
-                    lines: permitLines(
-                        "5000.0000 USDT",
-                        USDT_ADDR,
-                        "USDT",
-                        OTHER_ADDR,
-                    ),
-                },
                 {
                     kind: "a PERMIT2_PERMIT of 5,000 USDT to the router that the router may let fail, then a V3 exact-in of 600 USDT,",
                     commands: [0x8a, 0x00],
@@ -2675,45 +2657,41 @@ describe("uniswap decoder", () => {
             const DAI_5000 = 5000000000000000000000n;
             const MAX_UINT160 = 2n ** 160n - 1n;
 
-            // A batch names one spender for all its allowances.
-            test.each([
-                { kind: "the router", spender: ROUTER_ADDR },
-                { kind: "another spender", spender: OTHER_ADDR },
-            ])(
-                "a PERMIT2_PERMIT_BATCH of 5,000 USDT and unlimited DAI to $kind, then a V3 exact-in of 600 USDT, shows each allowance",
-                ({ spender }) => {
-                    const result = decodeSteps(
-                        [0x03, 0x00],
-                        [
-                            encodePermit2Batch(
-                                [
-                                    [USDT_ADDR, USDT_5000],
-                                    [DAI_ADDR, MAX_UINT160],
-                                ],
-                                spender,
-                            ),
-                            V3_600,
-                        ],
-                    );
-                    expect(result.name).toBe("Swap USDT → USDC");
-                    expect(linesBetweenTokens(result)).toEqual([
-                        ["Amount", "600.0000 USDT"],
-                        ...permitLines(
-                            "5000.0000 USDT",
-                            USDT_ADDR,
-                            "USDT",
-                            spender,
+            // A batch names one spender for all its allowances. One to
+            // another spender is under "an allowance to a spender other than
+            // the router" below.
+            test("a PERMIT2_PERMIT_BATCH of 5,000 USDT and unlimited DAI to the router, then a V3 exact-in of 600 USDT, shows each allowance", () => {
+                const result = decodeSteps(
+                    [0x03, 0x00],
+                    [
+                        encodePermit2Batch(
+                            [
+                                [USDT_ADDR, USDT_5000],
+                                [DAI_ADDR, MAX_UINT160],
+                            ],
+                            ROUTER_ADDR,
                         ),
-                        ...permitLines("Unlimited", DAI_ADDR, "DAI", spender),
-                    ]);
-                    // A batch pays nobody, so the swap's minimum is what the
-                    // sender receives.
-                    expect(detail(result, "Paid to")).toBeUndefined();
-                    expect(detail(result, "Min. received").value).toBe(
-                        "590.0000 USDC",
-                    );
-                },
-            );
+                        V3_600,
+                    ],
+                );
+                expect(result.name).toBe("Swap USDT → USDC");
+                expect(linesBetweenTokens(result)).toEqual([
+                    ["Amount", "600.0000 USDT"],
+                    ...permitLines(
+                        "5000.0000 USDT",
+                        USDT_ADDR,
+                        "USDT",
+                        ROUTER_ADDR,
+                    ),
+                    ...permitLines("Unlimited", DAI_ADDR, "DAI", ROUTER_ADDR),
+                ]);
+                // A batch pays nobody, so the swap's minimum is what the
+                // sender receives.
+                expect(detail(result, "Paid to")).toBeUndefined();
+                expect(detail(result, "Min. received").value).toBe(
+                    "590.0000 USDC",
+                );
+            });
 
             // A batch keeps a PERMIT2_PERMIT's amount from standing as the
             // Amount figure, before the permit as after it.
@@ -2766,7 +2744,7 @@ describe("uniswap decoder", () => {
                     ),
                 },
             ])(
-                "$kind that cannot be read, then a V3 exact-in of 600 USDT, says its allowances could not be decoded and shows no Amount figure",
+                "$kind that cannot be read, then a V3 exact-in of 600 USDT, says its allowances could not be decoded and shows no Amount figure and no Min. received",
                 ({ command, input }) => {
                     const result = decodeSteps(
                         [command, 0x00],
@@ -2776,6 +2754,14 @@ describe("uniswap decoder", () => {
                         ...USDT_600_GROUP,
                         ["Permit2 allowance", UNDECODED],
                     ]);
+                    // Its spender may be any address, as with an allowance
+                    // to a spender other than the router (below).
+                    // https://git.eeqj.de/sneak/AutistMask/issues/658 — on
+                    // next at e296546 this read Min. received.
+                    expect(detail(result, "Min. received")).toBeUndefined();
+                    expect(detail(result, "Min. paid out").value).toBe(
+                        "590.0000 USDC",
+                    );
                 },
             );
 
@@ -2804,6 +2790,125 @@ describe("uniswap decoder", () => {
             });
         });
 
+        // https://git.eeqj.de/sneak/AutistMask/issues/658 — code that a step
+        // runs can call a spender other than the router, which can then take
+        // up to its allowance from the sender before the transaction ends.
+        // On next at e296546 the Amount figure and Min. received took no
+        // account of it. An allowance of Token In to another spender now
+        // leaves no Amount figure, the swap steps' own takes get lines of
+        // their own, and any allowance to another spender leaves no Min.
+        // received.
+        describe("an allowance to a spender other than the router", () => {
+            const USDT_5000 = 5000000000n;
+            const DAI_5000 = 5000000000000000000000n;
+            const MAX_UINT160 = 2n ** 160n - 1n;
+            const USDT_5000_LINES = permitLines(
+                "5000.0000 USDT",
+                USDT_ADDR,
+                "USDT",
+                OTHER_ADDR,
+            );
+
+            test.each([
+                {
+                    kind: "a PERMIT2_PERMIT of 5,000 USDT to another spender, then a V3 exact-in of 600 USDT,",
+                    commands: [0x0a, 0x00],
+                    inputs: [
+                        encodePermit2(USDT_ADDR, USDT_5000, OTHER_ADDR),
+                        V3_600,
+                    ],
+                    lines: [...USDT_600_GROUP, ...USDT_5000_LINES],
+                    minimum: "590.0000 USDC",
+                },
+                {
+                    kind: "a V3 exact-in of 600 USDT, then a PERMIT2_PERMIT of 5,000 USDT to another spender,",
+                    commands: [0x00, 0x0a],
+                    inputs: [
+                        V3_600,
+                        encodePermit2(USDT_ADDR, USDT_5000, OTHER_ADDR),
+                    ],
+                    lines: [...USDT_600_GROUP, ...USDT_5000_LINES],
+                    minimum: "590.0000 USDC",
+                },
+                {
+                    kind: "a PERMIT2_PERMIT_BATCH of 5,000 USDT and unlimited DAI to another spender, then a V3 exact-in of 600 USDT,",
+                    commands: [0x03, 0x00],
+                    inputs: [
+                        encodePermit2Batch(
+                            [
+                                [USDT_ADDR, USDT_5000],
+                                [DAI_ADDR, MAX_UINT160],
+                            ],
+                            OTHER_ADDR,
+                        ),
+                        V3_600,
+                    ],
+                    lines: [
+                        ...USDT_600_GROUP,
+                        ...USDT_5000_LINES,
+                        ...permitLines(
+                            "Unlimited",
+                            DAI_ADDR,
+                            "DAI",
+                            OTHER_ADDR,
+                        ),
+                    ],
+                    minimum: "590.0000 USDC",
+                },
+                {
+                    kind: "a PERMIT2_PERMIT of 1 USDT to another spender, then a V3 exact-in of 600 USDT and a V2 exact-in of 400 USDT, both paid by the user,",
+                    commands: [0x0a, 0x00, 0x08],
+                    inputs: [
+                        ONE_USDT_PERMIT(OTHER_ADDR),
+                        V3_600,
+                        encodeV2SwapExactIn(USER_ADDR, USDT_400, 390000000n, [
+                            USDT_ADDR,
+                            USDC_ADDR,
+                        ]),
+                    ],
+                    lines: [
+                        ...USDT_600_GROUP,
+                        ...USDT_400_GROUP,
+                        ...ONE_USDT_LINES(OTHER_ADDR),
+                    ],
+                    // The last swap step's minimum.
+                    minimum: "390.0000 USDC",
+                },
+            ])(
+                "$kind shows each take's own lines and the allowances, and no Amount figure or Min. received",
+                ({ commands, inputs, lines, minimum }) => {
+                    const result = decodeSteps(commands, inputs);
+                    expect(result.name).toBe("Swap USDT → USDC");
+                    expect(linesBetweenTokens(result)).toEqual(lines);
+                    expect(detail(result, "Paid to")).toBeUndefined();
+                    expect(detail(result, "Min. received")).toBeUndefined();
+                    expect(detail(result, "Min. paid out").value).toBe(minimum);
+                },
+            );
+
+            // An allowance of another token leaves the Amount figure for
+            // Token In.
+            test("a PERMIT2_PERMIT of 5,000 DAI to another spender, then a V3 exact-in of 600 USDT, shows the swap's 600 USDT and no Min. received", () => {
+                const result = decodeSteps(
+                    [0x0a, 0x00],
+                    [encodePermit2(DAI_ADDR, DAI_5000, OTHER_ADDR), V3_600],
+                );
+                expect(linesBetweenTokens(result)).toEqual([
+                    ["Amount", "600.0000 USDT"],
+                    ...permitLines(
+                        "5000.0000 DAI",
+                        DAI_ADDR,
+                        "DAI",
+                        OTHER_ADDR,
+                    ),
+                ]);
+                expect(detail(result, "Min. received")).toBeUndefined();
+                expect(detail(result, "Min. paid out").value).toBe(
+                    "590.0000 USDC",
+                );
+            });
+        });
+
         // A V3_SWAP_EXACT_OUT whose path is shorter than one token cannot be
         // read. It may pay any address and take from the sender, so it
         // leaves no Amount figure.
@@ -3625,6 +3730,88 @@ describe("uniswap decoder", () => {
         },
     );
 
+    // https://git.eeqj.de/sneak/AutistMask/issues/574 — a V4 step that buys
+    // at least 0.5 WETH with 1,000 USDT, spends some of it on USDC, and takes
+    // the USDC and then the WETH, so its output side is WETH. Only what is
+    // left of the 0.5 WETH is sure to reach the user, and the screen read
+    // Min. received 0.5000 WETH.
+    test.each([
+        {
+            spend: "0.3 WETH for at least 594 USDC",
+            swap: {
+                id: V4_SWAP_EXACT_IN_SINGLE_ID,
+                param: encodeV4ExactInSingle(
+                    WETH_ADDR,
+                    USDC_ADDR,
+                    300000000000000000n,
+                    594000000n,
+                ),
+            },
+        },
+        {
+            spend: "0.3 WETH through DAI for at least 594 USDC",
+            swap: {
+                id: V4_SWAP_EXACT_IN,
+                param: encodeV4ExactIn(
+                    WETH_ADDR,
+                    [DAI_ADDR, USDC_ADDR],
+                    300000000000000000n,
+                    594000000n,
+                ),
+            },
+        },
+        {
+            spend: "at most 0.3 WETH for exactly 594 USDC",
+            swap: {
+                id: V4_SWAP_EXACT_OUT_SINGLE_ID,
+                param: encodeV4ExactOutSingle(
+                    WETH_ADDR,
+                    USDC_ADDR,
+                    594000000n,
+                    300000000000000000n,
+                ),
+            },
+        },
+    ])(
+        "a V4 step that buys WETH and spends $spend, with WETH as its output side, shows no Min. received",
+        ({ swap }) => {
+            const data = buildExecute(
+                "0x10",
+                [
+                    encodeV4Swap(
+                        new Uint8Array([
+                            USDT_FOR_WETH_IN.id,
+                            swap.id,
+                            V4_SETTLE_ALL_ID,
+                            V4_TAKE_ID,
+                            V4_TAKE_ID,
+                        ]),
+                        [
+                            USDT_FOR_WETH_IN.param,
+                            swap.param,
+                            encodeV4SettleAll(USDT_ADDR, 1000000000n),
+                            encodeV4Take(USDC_ADDR),
+                            encodeV4Take(WETH_ADDR),
+                        ],
+                    ),
+                ],
+                9999999999n,
+            );
+
+            const result = uniswap.decode(
+                data,
+                ROUTER_ADDR,
+                "0x1",
+                {},
+                USER_ADDR,
+            );
+            expect(result.name).toBe("Swap USDT → WETH");
+            expect(detail(result, "Amount").value).toBe("1000.0000 USDT");
+            expect(detail(result, "Token Out").address).toBe(WETH_ADDR);
+            expect(detail(result, "Min. received")).toBeUndefined();
+        },
+    );
+
     // A V4 step that spends WETH on USDC and on DAI. Its swap actions buy two
     // currencies that none of them spends, and CLOSE_CURRENCY, which the
     // decoder does not read, names no side, so its output side is unknown.

tests/uniswapRecipient.test.js

@@ -1332,6 +1332,10 @@ describe("any token left in the router is not received", () => {
                 ),
             ),
             left: tokenLine(WETH, "WETH"),
+            // The second swap action spends 1 USDC of what the first buys,
+            // so the step states no minimum
+            // (https://git.eeqj.de/sneak/AutistMask/issues/574).
+            noMin: true,
         },
         {
             kind: "a WRAP_ETH of 1 ETH into the router, then a V4 SETTLE of OPEN_DELTA from the router before the swap, which the user settles",
@@ -1432,7 +1436,7 @@ describe("any token left in the router is not received", () => {
             ),
             left: { label: "Token moved into the router", value: "ETH" },
         },
-    ])("$kind", ({ data, left, spent, unread }) => {
+    ])("$kind", ({ data, left, spent, unread, noMin }) => {
         const result = decode(data);
         expect(labels(result)).toEqual([
             "Protocol",
@@ -1458,7 +1462,7 @@ describe("any token left in the router is not received", () => {
             "Token Out",
             "Paid to",
             "Token moved into the router",
-            "Min. paid out",
+            ...(noMin ? [] : ["Min. paid out"]),
             "Steps",
             "Deadline",
         ]);
@@ -1474,7 +1478,9 @@ describe("any token left in the router is not received", () => {
         }
         expect(paidTo(result)).toEqual([STAYS_IN_ROUTER]);
         expect(detail(result, "Token moved into the router")).toEqual(left);
-        expect(detail(result, "Min. paid out").value).toBe("1990.0000 USDC");
+        expect(detail(result, "Min. paid out")?.value).toBe(
+            noMin ? undefined : "1990.0000 USDC",
+        );
     });
 
     // Uniswap's own routes: a swap paid in ETH wraps into the router what its
@@ -2802,26 +2808,37 @@ describe("the allow-revert flag", () => {
     });
 
     // Only the routers from UniversalRouterV2 on let a PERMIT2_PERMIT fail.
+    // The permit's spender is the router at ROUTER, which on every other
+    // router is an allowance to another spender, so the minimum reads
+    // Min. paid out there.
     test.each([
-        { router: "UniversalRouterV1", address: ROUTER_V1, mark: "" },
+        {
+            router: "UniversalRouterV1",
+            address: ROUTER_V1,
+            mark: "",
+            minimum: "Min. paid out",
+        },
         {
             router: "UniversalRouterV1_2_V2Support",
             address: ROUTER_V1_2,
             mark: "",
+            minimum: "Min. paid out",
         },
         {
             router: "UniversalRouterV2",
             address: ROUTER,
             mark: " (allowed to fail)",
+            minimum: "Min. received",
         },
         {
             router: "UniversalRouterV2_1_2",
             address: ROUTER_V2_1_2,
             mark: " (allowed to fail)",
+            minimum: "Min. paid out",
         },
     ])(
         "on $router, a PERMIT2_PERMIT with the flag is listed as 'Permit2 Permit$mark', and the swap's lines read as without the flag",
-        ({ address, mark }) => {
+        ({ address, mark, minimum }) => {
             const steps = [
                 permit2Permit(USDT, USDT_2000),
                 swapToWeth(MSG_SENDER),
@@ -2853,7 +2870,7 @@ describe("the allow-revert flag", () => {
             expect(
                 labels(withFlag).filter((l) => permitLines.includes(l)),
             ).toEqual(permitLines);
-            expect(detail(withFlag, "Min. received").value).toBe("1.0000 WETH");
+            expect(detail(withFlag, minimum).value).toBe("1.0000 WETH");
         },
     );