fix: a V4 swap action not in the deployed shape is shown as not decoded (closes #358)

The four V4 swap actions are read only as the parameter structs deployed
on mainnet and Sepolia. ethers decoded the newer v4-periphery structs,
which add minHopPriceX36, as the deployed ones without an error, and the
newer multi-hop exact-in struct showed the offset of its hop-price array
as the swap amount. A decode now counts only when encoding it again gives
back the same bytes. When a swap action fails that, its step is listed as
"V4 Swap (could not be decoded)", and a token line left without a
currency reads "Unknown (could not be decoded)" rather than "not named in
the calldata". The README records both.

Model: opus-5-5

README.md

@@ -239,8 +239,12 @@ provide:
   `make check` stays non-mutating. Linting runs only in the container, because
   an ESLint result that depends on whichever ESLint the host happens to have is
   not a result, so docker is required to lint.
-- `script/fmt` — format all files (writes), on the host
-- `script/fmt-check` — check formatting (read-only), on the host
+- `script/fmt` — format all files (writes), on the host, with the `prettier`
+  that `script/bootstrap` installs in `node_modules/`; when that one is missing
+  it fails and says to run `script/bootstrap`, instead of using a `prettier`
+  from the `PATH`
+- `script/fmt-check` — check formatting (read-only), on the host, with the same
+  `prettier` and the same refusal
 - `script/check` — run `script/test`, `script/lint` and `script/fmt-check`
 - `script/check-censored` — assert the competitor name RULES.md bars appears
   nowhere in the working tree or under `dist/` outside its documented
@@ -1106,14 +1110,16 @@ read:
 
 The swap's `Token In` and `Token Out` lines name a currency, not an amount; each
 reads `Unknown (not named in the calldata)` when the decoder found no token for
-that side. An `UNWRAP_WETH` step makes `Token Out` ETH only when the output side
-is WETH, on mainnet or Sepolia, or when no step set the output side; a WETH
-`Min. received` figure then reads in ETH. Otherwise `Token Out` and
-`Min. received` keep the output side's own token and figure, whether the swap
-was paid in ETH or in a token: a V2 exact-out swap that buys USDC and then
-unwraps the WETH it did not spend shows USDC. The token permission warning on
-the signature screen has its own amount wording, including `Unknown`; the
-SignApproval section below describes it.
+that side, or `Unknown (could not be decoded)` instead when a V4 swap action in
+the transaction could not be read (see Transaction Decoding below). An
+`UNWRAP_WETH` step makes `Token Out` ETH only when the output side is WETH, on
+mainnet or Sepolia, or when no step set the output side; a WETH `Min. received`
+figure then reads in ETH. Otherwise `Token Out` and `Min. received` keep the
+output side's own token and figure, whether the swap was paid in ETH or in a
+token: a V2 exact-out swap that buys USDC and then unwraps the WETH it did not
+spend shows USDC. The token permission warning on the signature screen has its
+own amount wording, including `Unknown`; the SignApproval section below
+describes it.
 
 The swap's `Deadline` line is the router's deadline as a UTC date and time, e.g.
 `2026-02-27 08:25:51`. A JavaScript date reaches only to 275760-09-13 00:00:00
@@ -2160,6 +2166,13 @@ view would leave a wallet one click from deletion.
     - Typed data that states no primary type, or one other than the type it
       would be signed as, or that cannot be read → shown with the error line
       saying so and "Sign" disabled; only "Reject" remains
+    - Typed data whose domain `chainId` names a chain other than the active
+      network's → shown with the error line naming both chain ids and "Sign"
+      disabled; only "Reject" remains. EIP-712 asks for this, because the
+      signature is valid on the chain the domain names. Typed data with no
+      `chainId` is not refused. The background refuses such a signature too,
+      against the network active when the signature reaches it, and answers the
+      site with the same sentence
     - A `personal_sign` or `eth_sign` message that is not hex (`0x` or `0X` and
       an even number of hex digits, the form ethers' `getBytes` reads when
       signing) → shown as plain text, with the error line "This message is plain
@@ -2652,7 +2665,8 @@ plaintext list of anyone's domain names.
 When a dApp on a blocklisted domain requests a wallet connection, transaction
 approval, or signature, the approval popup displays a prominent red warning
 banner alerting the user. The domain checker matches exact hostnames and all
-parent domains (subdomain matching).
+parent domains (subdomain matching), and checks a hostname written with a
+trailing dot (`name.`) as `name`.
 
 #### Transaction Decoding
 

script/fmt

@@ -25,6 +25,13 @@ run_yarn() {
 
 main() {
     cd "$ROOT"
+    # Without the repo's own prettier, yarn runs whatever prettier is on
+    # the PATH, which may be a version that formats files differently.
+    if [ ! -x node_modules/.bin/prettier ]; then
+        echo "fmt: this repo's prettier is not installed in node_modules/," \
+            "so run script/bootstrap first." >&2
+        exit 1
+    fi
     echo "Formatting..."
     run_yarn run fmt
 }

script/fmt-check

@@ -26,6 +26,13 @@ run_yarn() {
 
 main() {
     cd "$ROOT"
+    # Without the repo's own prettier, yarn runs whatever prettier is on
+    # the PATH, which may be a version that formats files differently.
+    if [ ! -x node_modules/.bin/prettier ]; then
+        echo "fmt-check: this repo's prettier is not installed in" \
+            "node_modules/, so run script/bootstrap first." >&2
+        exit 1
+    fi
     echo "Checking formatting..."
     run_yarn run fmt-check
 }

src/background/index.js

@@ -22,6 +22,7 @@ const { debugFetch, log } = require("../shared/log");
 const {
     verifySignedTx,
     verifySignature,
+    typedDataChainRefusal,
     failureIsRetryable,
     describeTxFailure,
     sameAddress,
@@ -632,8 +633,9 @@ function isExtensionSender(sender) {
 // had refused.
 //
 // TX and sign approvals do not decide here. They stay pending across a
-// disconnect — the user can reopen the toolbar popup — and are rejected by the
-// windows.onRemoved listener below.
+// disconnect. When their window closes, the windows.onRemoved listener below
+// rejects them, unless an approved attempt is still running, in which case
+// that attempt answers the page.
 runtime.onConnect.addListener((port) => {
     if (port.name.startsWith("approval:")) {
         const id = port.name.split(":")[1];
@@ -661,7 +663,9 @@ runtime.onConnect.addListener((port) => {
             const approval = pendingApprovals[id];
             if (approval) {
                 if (approval.type === "tx" || approval.type === "sign") {
-                    // Keep pending — user can reopen the toolbar popup
+                    // When its window closes, windows.onRemoved rejects it,
+                    // unless an approved attempt is still running, in which
+                    // case that attempt answers the page.
                     return;
                 }
                 settleApproval(id, { approved: false, remember: false });
@@ -1764,7 +1768,8 @@ runtime.onMessage.addListener((msg, sender, sendResponse) => {
 
         (async () => {
             try {
-                const activeAddress = await getActiveAddress();
+                const s = await getState();
+                const activeAddress = activeAddressOf(s);
                 // Same as the transaction path: the address the approval named
                 // is the one that must have signed, and a switch since then is
                 // a refusal rather than a signature from another account.
@@ -1783,6 +1788,20 @@ runtime.onMessage.addListener((msg, sender, sendResponse) => {
                     signature,
                     approval.approvedFrom,
                 );
+                // The sign screen refuses typed data whose domain names
+                // another chain. A signature for it that arrives anyway is
+                // refused here, against the network active now.
+                const sp = approval.signParams;
+                if (
+                    sp.method === "eth_signTypedData_v4" ||
+                    sp.method === "eth_signTypedData"
+                ) {
+                    const refusal = typedDataChainRefusal(
+                        JSON.parse(sp.typedData).domain,
+                        networkById(s.networkId),
+                    );
+                    if (refusal) throw new ApprovalMismatchError(refusal);
+                }
                 settleApproval(msg.id, { signature }, { holdsClaim: true });
                 sendResponse({ signature });
             } catch (e) {

src/popup/index.html

@@ -7,9 +7,10 @@
         <link rel="stylesheet" href="styles.css" />
     </head>
     <!-- Chrome gives extension pages a stylesheet of its own that sets the
-         font on body, and a Tailwind class beats it only when marked
-         important: hence font-mono! rather than font-mono. -->
-    <body class="bg-bg text-fg font-mono! text-sm">
+         font and its size on body, and a Tailwind class beats it only when
+         marked important: hence font-mono! and text-sm! rather than
+         font-mono and text-sm. -->
+    <body class="bg-bg text-fg font-mono! text-sm!">
         <div id="app" class="p-2 pr-5 overflow-x-hidden">
             <!-- ============ GLOBAL TITLE BAR ============ -->
             <div
@@ -87,11 +88,14 @@
 
                 <!-- Mnemonic form section -->
                 <div id="add-wallet-section-mnemonic">
-                    <p class="mb-2">
-                        Enter your 12 or 24 word recovery phrase below, or click
-                        the button to roll the die for a new one.
-                    </p>
-                    <div class="mb-1 flex justify-end">
+                    <!-- The die button shares the instruction's row: on a row
+                         of its own it pushes Import below the fold at
+                         360x600. -->
+                    <div class="mb-2 flex justify-between items-start gap-2">
+                        <p>
+                            Enter your 12 or 24 word recovery phrase below, or
+                            click the button to roll the die for a new one.
+                        </p>
                         <button
                             id="btn-generate-phrase"
                             class="border border-border px-2 py-1 hover:bg-fg hover:text-bg cursor-pointer text-xs"

src/popup/views/approval.js

@@ -12,7 +12,7 @@ const {
     formatFee,
     tokenLabel,
 } = require("./helpers");
-const { state, saveState } = require("../../shared/state");
+const { state, saveState, currentNetwork } = require("../../shared/state");
 const {
     networkById,
     networkByChainId,
@@ -46,7 +46,10 @@ const {
 const { decryptWithPassword } = require("../../shared/vault");
 const { getSignerForAddress } = require("../../shared/wallet");
 const { walletDefect } = require("../../shared/walletDefects");
-const { describeSigningFailure } = require("../../shared/approvalVerify");
+const {
+    describeSigningFailure,
+    typedDataChainRefusal,
+} = require("../../shared/approvalVerify");
 const txStatus = require("./txStatus");
 const uniswap = require("../../shared/uniswap");
 const { notify, runtimeApi, sendMessage } = require("../../shared/browserApi");
@@ -443,7 +446,8 @@ function signedPrimaryType(types) {
 // Why a signature request cannot be signed, as a sentence for the error line,
 // or null when it can. Only typed data is refused: the `primaryType` the page
 // states has to be the type ethers will sign, or this screen would name one
-// message while another is signed.
+// message while another is signed. Its domain may name no chain but the active
+// network's.
 function typedDataRefusal(sp) {
     if (sp.method === "personal_sign" || sp.method === "eth_sign") return null;
     let data;
@@ -466,7 +470,7 @@ function typedDataRefusal(sp) {
             ", so it cannot be signed."
         );
     }
-    return null;
+    return typedDataChainRefusal(data.domain, currentNetwork());
 }
 
 // The largest amount a Permit2 allowance can hold, a uint160. Permit2 treats

src/shared/approvalVerify.js

@@ -53,6 +53,7 @@ const {
     accessListify,
     formatEther,
     getAddress,
+    getBigInt,
     getBytes,
     toQuantity,
     verifyMessage,
@@ -635,6 +636,33 @@ function verifySignature(signParams, signature, expectedFrom) {
     return recovered;
 }
 
+// Why typed data cannot be signed while `network` is the active network, as a
+// sentence, or null when it can. EIP-712 has a wallet refuse typed data whose
+// domain names another chain, because the signature is valid on that chain.
+// ethers signs no chain id when the domain's is null or absent, and reads any
+// other with getBigInt(), so 1, "1" and "0x1" are the same chain here too.
+function typedDataChainRefusal(domain, network) {
+    const chainId = domain?.chainId;
+    if (chainId === undefined || chainId === null) return null;
+    let named;
+    try {
+        named = getBigInt(chainId);
+    } catch {
+        return "This typed data cannot be read, so it cannot be signed.";
+    }
+    const active = getBigInt(network.chainId);
+    if (named === active) return null;
+    return (
+        "This typed data is for chain id " +
+        named +
+        ", but the active network is " +
+        network.name +
+        " (chain id " +
+        active +
+        "), so it cannot be signed."
+    );
+}
+
 // The stage a transaction approval failed at. Which stage it is decides
 // whether the approval survives the failure.
 const TX_STAGE_SIGN = "sign";
@@ -796,6 +824,7 @@ function describeSigningFailure(response, fallbackMessage) {
 module.exports = {
     verifySignedTx,
     verifySignature,
+    typedDataChainRefusal,
     assertNoForbiddenFields,
     assertNothingUnchecked,
     assertCanonicalBytes,

src/shared/phishingDomains.js

@@ -110,11 +110,14 @@ function hashListed(hash) {
  * Generate hostname variants for subdomain matching.
  * "sub.evil.com" yields ["sub.evil.com", "evil.com"].
  *
+ * A trailing dot is dropped: "evil.com." is the fully qualified spelling of
+ * "evil.com", and the browser loads the same site from either.
+ *
  * @param {string} hostname
  * @returns {string[]}
  */
 function hostnameVariants(hostname) {
-    const h = hostname.toLowerCase();
+    const h = hostname.toLowerCase().replace(/\.$/, "");
     const variants = [h];
     const parts = h.split(".");
     // Parent domains: a.b.c.d -> b.c.d, c.d

src/shared/uniswap.js

@@ -53,6 +53,11 @@ function formatAmount(raw, decimals) {
 // on a scale — not as a token name, and not as a quantity.
 const UNNAMED_CURRENCY = "Unknown (not named in the calldata)";
 
+// The same refusal when a V4 swap action could not be read (see
+// decodeExactly()). That action names both of its currencies, so saying the
+// calldata did not name one would be false.
+const UNDECODED_CURRENCY = "Unknown (could not be decoded)";
+
 // Explicit presence, never truthiness. Every gate in this file that guards a
 // decoded value goes through here: an address is never falsy once set, but an
 // amount of 0n is, and a gate that cannot tell a genuine zero from an absent
@@ -488,6 +493,7 @@ function decode(data, toAddress, sources) {
         let minOutput = null;
         let hasUnwrapWeth = false;
         let hasV2ExactOut = false;
+        let swapUndecoded = false;
         const commandNames = [];
 
         // THE INVARIANT: an amount and the token it is counted in always come
@@ -594,6 +600,7 @@ function decode(data, toAddress, sources) {
                         // Without this, a swap action that went unread would
                         // look like one that had nothing to show.
                         if (v4.swapUndecoded) {
+                            swapUndecoded = true;
                             commandNames[i] += " (could not be decoded)";
                         }
                         setInputOnce(v4.tokenIn, v4.amountIn);
@@ -619,12 +626,13 @@ function decode(data, toAddress, sources) {
             }
         }
 
-        // Resolve token info. A null token on either side means the calldata
-        // named no currency for it; tokenInfo() refuses rather than calling it
-        // ETH. UNWRAP_WETH turns WETH into ETH, so it makes the output ETH
-        // when the output side is WETH, or when no step set the output side.
-        // Any other output keeps its own token and figure: a swap that buys
-        // USDC and then unwraps the WETH it did not spend receives USDC.
+        // Resolve token info. A null token on either side means no step that
+        // was read named a currency for it; tokenInfo() refuses rather than
+        // calling it ETH. UNWRAP_WETH turns WETH into ETH, so it makes the
+        // output ETH when the output side is WETH, or when no step set the
+        // output side. Any other output keeps its own token and figure: a swap
+        // that buys USDC and then unwraps the WETH it did not spend receives
+        // USDC.
         const outputIsWeth =
             present(outputToken) &&
             WETH_ADDRESSES.includes(outputToken.toLowerCase());
@@ -668,7 +676,10 @@ function decode(data, toAddress, sources) {
             // rather than going missing or naming a token by default. Same
             // wording as the Token Out refusal below: the two sides of this
             // screen must not describe the same condition in two ways.
-            details.push({ label: "Token In", value: UNNAMED_CURRENCY });
+            details.push({
+                label: "Token In",
+                value: swapUndecoded ? UNDECODED_CURRENCY : UNNAMED_CURRENCY,
+            });
         }
 
         if (present(inputAmount)) {
@@ -731,7 +742,10 @@ function decode(data, toAddress, sources) {
             // rather than going missing or naming a token by default, and a
             // Min. received figure below it is never attached to a token the
             // calldata did not state.
-            details.push({ label: "Token Out", value: UNNAMED_CURRENCY });
+            details.push({
+                label: "Token Out",
+                value: swapUndecoded ? UNDECODED_CURRENCY : UNNAMED_CURRENCY,
+            });
         }
 
         if (present(minOutput)) {

tests/backgroundApproval.test.js

@@ -397,7 +397,13 @@ function loadBackground(options) {
                 rpcResult = r;
             },
         );
-        return { result: () => rpcResult };
+        return {
+            id: () =>
+                new URL(created[created.length - 1].url).searchParams.get(
+                    "approval",
+                ),
+            result: () => rpcResult,
+        };
     }
 
     // A dApp asking to connect. The origin defaults to one the persisted
@@ -1484,6 +1490,55 @@ describe("what the approval is verified against", () => {
         });
     });
 
+    // Typed data whose domain names another chain is refused on the sign
+    // screen; a signature for it that reaches the background anyway is not
+    // handed to the page (https://git.eeqj.de/sneak/AutistMask/issues/519).
+    // TYPED_DATA names mainnet.
+    async function answerTypedData(bg, pending) {
+        const { domain, types, message } = JSON.parse(TYPED_DATA);
+        delete types.EIP712Domain;
+        const signature = await signer.signTypedData(domain, types, message);
+        const answer = bg.send(
+            {
+                type: "AUTISTMASK_SIGN_RESPONSE",
+                id: pending.id(),
+                approved: true,
+                signature,
+            },
+            { url: bg.fromPopup.url },
+        );
+        await settle();
+        return { answer, signature };
+    }
+
+    test("typed data for the active chain is handed back signed", async () => {
+        const bg = loadBackground();
+        const pending = bg.requestTypedData();
+        await settle();
+
+        const { answer, signature } = await answerTypedData(bg, pending);
+
+        expect(answer.sendResponse).toHaveBeenCalledWith({ signature });
+        expect(pending.result()).toEqual({ result: signature });
+    });
+
+    test("typed data for another chain is refused, not handed back", async () => {
+        const bg = loadBackground();
+        bg.setNetwork(SEPOLIA);
+        const pending = bg.requestTypedData();
+        await settle();
+
+        const { answer } = await answerTypedData(bg, pending);
+
+        const refusal =
+            "This typed data is for chain id 1, but the active network is Sepolia Testnet (chain id 11155111), so it cannot be signed.";
+        expect(answer.sendResponse).toHaveBeenCalledWith({
+            error: refusal,
+            retryable: false,
+        });
+        expect(pending.result()).toEqual({ error: { message: refusal } });
+    });
+
     test("a sign request from another address raises no approval at all", async () => {
         const bg = loadBackground();
         const pending = bg.requestSign(other.address);

tests/e2e/firefox/run.js

@@ -128,6 +128,18 @@ step("the popup is drawn in the monospace font it declares", async (env) => {
     );
 });
 
+// The same check as the Chrome suite's (#456), so both browsers are held to
+// the same size.
+step("the popup's text is drawn at the 14px text-sm declares", async (env) => {
+    const size = await env.driver.execute(
+        "return getComputedStyle(document.body).fontSize;",
+    );
+    assert(
+        size === "14px",
+        "the popup's text is drawn at " + size + ", not at the 14px of text-sm",
+    );
+});
+
 // The recovery screen (#361): the Chrome suite's four cases, run before any
 // wallet exists for the same reason. With no wallet nothing saves on a timer,
 // so no save can write a good record over the unreadable one. The last of them

tests/e2e/run.js

@@ -113,6 +113,18 @@ test("the popup is drawn in the monospace font it declares (#418)", async (env)
     );
 });
 
+// The same stylesheet sets the size on body to 75%, which would draw the
+// popup at 12px.
+test("the popup's text is drawn at the 14px text-sm declares (#456)", async (env) => {
+    const size = await env.page.evaluate(
+        () => getComputedStyle(document.body).fontSize,
+    );
+    assert(
+        size === "14px",
+        "the popup's text is drawn at " + size + ", not at the 14px of text-sm",
+    );
+});
+
 // The empirical half of #182. The manifest change is only a claim about
 // what the CSP permits; this is the observation. Two things have to hold
 // together, and the run covers both: the popup realm compiles WASM (here),

tests/phishingDomains.test.js

@@ -89,6 +89,12 @@ describe("vendored blocklist", () => {
         expect(isPhishingDomain(LISTED[0].toUpperCase())).toBe(true);
     });
 
+    test("a hostname ending in a dot is the same host", () => {
+        expect(isPhishingDomain(LISTED[1] + ".")).toBe(true);
+        expect(isPhishingDomain("wallet." + LISTED[1] + ".")).toBe(true);
+        expect(isPhishingDomain(CLEAN[0] + ".")).toBe(false);
+    });
+
     test("returns false for an empty or missing hostname", () => {
         expect(isPhishingDomain("")).toBe(false);
         expect(isPhishingDomain(null)).toBe(false);
@@ -133,6 +139,13 @@ describe("hostnameVariants", () => {
     test("lowercases hostnames", () => {
         expect(hostnameVariants("Evil.COM")).toEqual(["evil.com"]);
     });
+
+    test("drops the trailing dot of a fully qualified hostname", () => {
+        expect(hostnameVariants("sub.evil.com.")).toEqual([
+            "sub.evil.com",
+            "evil.com",
+        ]);
+    });
 });
 
 describe("domain hashing", () => {

tests/typedDataPermit.test.js

@@ -240,6 +240,7 @@ function request(data) {
 beforeEach(() => {
     state.trackedTokens = [];
     state.wallets = [];
+    state.networkId = "mainnet";
 });
 
 describe("a token permission is warned about, naming spender and amount", () => {
@@ -532,3 +533,66 @@ describe("the sign screen refuses a mismatched primary type", () => {
         expect(node("btn-approve-sign").disabled).toBe(true);
     });
 });
+
+// EIP-712: a wallet refuses typed data whose domain names a chain other than
+// the active one, because the signature is valid on the chain it names
+// (https://git.eeqj.de/sneak/AutistMask/issues/519). The wallet is on Sepolia
+// and the site asks for a mainnet USDC Permit.
+describe("the sign screen refuses typed data for another chain", () => {
+    const REFUSAL =
+        "This typed data is for chain id 1, but the active network is Sepolia Testnet (chain id 11155111), so it cannot be signed.";
+
+    function withChainId(chainId) {
+        return { ...PERMIT, domain: { ...PERMIT.domain, chainId } };
+    }
+
+    beforeEach(() => {
+        decryptWithPassword.mockClear();
+        state.networkId = "sepolia";
+    });
+
+    test("another chain shows the error, with Sign disabled", async () => {
+        await openSignScreen(PERMIT);
+        expect(node("approve-sign-error").textContent).toBe(REFUSAL);
+        expect(node("btn-approve-sign").disabled).toBe(true);
+    });
+
+    test("Sign clicked anyway decrypts and signs nothing", async () => {
+        const sent = await openSignScreen(PERMIT);
+        node("approve-sign-password").value = "any password";
+        await click("btn-approve-sign");
+
+        expect(decryptWithPassword).not.toHaveBeenCalled();
+        expect(sent.map((msg) => msg.type)).not.toContain(
+            "AUTISTMASK_SIGN_RESPONSE",
+        );
+        expect(node("approve-sign-error").textContent).toBe(REFUSAL);
+    });
+
+    // ethers signs 1, "1" and "0x1" as the same chain id.
+    test("the chain id is refused in each form ethers signs", () => {
+        for (const chainId of [1, "1", "0x1"]) {
+            expect(typedDataRefusal(request(withChainId(chainId)))).toBe(
+                REFUSAL,
+            );
+        }
+    });
+
+    test("a chain id that is not a number is refused", () => {
+        expect(typedDataRefusal(request(withChainId("mainnet")))).toBe(
+            "This typed data cannot be read, so it cannot be signed.",
+        );
+    });
+
+    test("the active chain leaves Sign enabled", async () => {
+        await openSignScreen(withChainId("0xaa36a7"));
+        expect(node("approve-sign-error").textContent).toBe("");
+        expect(node("btn-approve-sign").disabled).toBe(false);
+    });
+
+    test("no chain id leaves Sign enabled", async () => {
+        await openSignScreen(withChainId(undefined));
+        expect(node("approve-sign-error").textContent).toBe("");
+        expect(node("btn-approve-sign").disabled).toBe(false);
+    });
+});

tests/uniswap.test.js

@@ -346,6 +346,44 @@ describe("uniswap decoder", () => {
         },
     );
 
+    // The decoder does not read SETTLE_ALL or TAKE_ALL, so here only the
+    // unread swap action names the currencies. The token lines must not say
+    // the calldata did not name them.
+    test.each(V4_SWAP_ACTION_SHAPES)(
+        "a V4 $action in the newer shape, then SETTLE_ALL and TAKE_ALL, says both tokens could not be decoded",
+        ({ id, newer }) => {
+            const data = buildExecute(
+                "0x10",
+                [
+                    // 0x0c is SETTLE_ALL (currency, maxAmount), 0x0f is
+                    // TAKE_ALL (currency, minAmount).
+                    encodeV4Swap(new Uint8Array([id, 0x0c, 0x0f]), [
+                        newer,
+                        coder.encode(
+                            ["address", "uint256"],
+                            [WETH_ADDR, ONE_WETH],
+                        ),
+                        coder.encode(
+                            ["address", "uint256"],
+                            [USDC_ADDR, 990000n],
+                        ),
+                    ]),
+                ],
+                9999999999n,
+            );
+            const result = uniswap.decode(data, ROUTER_ADDR);
+            expect(detail(result, "Steps").value).toBe(
+                "V4 Swap (could not be decoded)",
+            );
+            expect(detail(result, "Token In").value).toBe(
+                "Unknown (could not be decoded)",
+            );
+            expect(detail(result, "Token Out").value).toBe(
+                "Unknown (could not be decoded)",
+            );
+        },
+    );
+
     test("decodes V2_SWAP_EXACT_IN with known tokens", () => {
         const data = buildExecute(
             "0x08", // V2_SWAP_EXACT_IN

tests/uniswapUndeterminedTokenIn.test.js

@@ -97,7 +97,11 @@ describe("an execute() whose input currency never decoded", () => {
         ]);
 
     test("says the input token is unknown instead of naming ETH", () => {
-        expect(detail(data(), "Token In").value).toBe(REFUSAL);
+        // The swap action that would name it could not be read, so the line
+        // says that rather than REFUSAL's "not named in the calldata".
+        expect(detail(data(), "Token In").value).toBe(
+            "Unknown (could not be decoded)",
+        );
     });
 
     test("keeps a Token In line, so the screen never omits what is paid", () => {