mailinabox/setup/functions.sh

function hide_output {
	# This function hides the output of a command unless the command fails
	# and returns a non-zero exit code.

	# Get a temporary file.
	OUTPUT=$(tempfile)

	# Execute command, redirecting stderr/stdout to the temporary file.
	$@ &> $OUTPUT

	# If the command failed, show the output that was captured in the temporary file.
	if [ $? != 0 ]; then
		# Something failed.
		echo
		echo FAILED: $@
		echo -----------------------------------------
		cat $OUTPUT
		echo -----------------------------------------
	fi

	# Remove temporary file.
	rm -f $OUTPUT
}

function apt_install {
	# Report any packages already installed.
	PACKAGES=$@
	TO_INSTALL=""
	ALREADY_INSTALLED=""
	for pkg in $PACKAGES; do
		if dpkg -s $pkg 2>/dev/null | grep "^Status: install ok installed" > /dev/null; then
			if [[ ! -z "$ALREADY_INSTALLED" ]]; then ALREADY_INSTALLED="$ALREADY_INSTALLED, "; fi
			ALREADY_INSTALLED="$ALREADY_INSTALLED$pkg (`dpkg -s $pkg | grep ^Version: | sed -e 's/.*: //'`)"
		else
			TO_INSTALL="$TO_INSTALL""$pkg "
		fi
	done

	# List the packages already installed.
	if [[ ! -z "$ALREADY_INSTALLED" ]]; then
		echo already installed: $ALREADY_INSTALLED
	fi

	# List the packages about to be installed.
	if [[ ! -z "$TO_INSTALL" ]]; then
		echo installing $TO_INSTALL...
	fi

	# 'DEBIAN_FRONTEND=noninteractive' is to prevent dbconfig-common from asking you questions.
	#
	# Although we could pass -qq to apt-get to make output quieter, many packages write to stdout
	# and stderr things that aren't really important. Use our hide_output function to capture
	# all of that and only show it if there is a problem (i.e. if apt_get returns a failure exit status).
	#
	# Also note that we still include the whole original package list in the apt-get command in
	# case it wants to upgrade anything, I guess? Maybe we can remove it. Doesn't normally make
	# a difference.
	DEBIAN_FRONTEND=noninteractive \
	hide_output \
	apt-get -y install $PACKAGES
}

function get_default_hostname {
	# Guess the machine's hostname. It should be a fully qualified
	# domain name suitable for DNS. None of these calls may provide
	# the right value, but it's the best guess we can make.
	set -- $(
		get_hostname_from_reversedns ||
		hostname --fqdn      2>/dev/null ||
		hostname --all-fqdns 2>/dev/null ||
		hostname             2>/dev/null)
	printf '%s\n' "$1" # return this value
}

function get_hostname_from_reversedns {
	# Do a reverse DNS lookup on our public IPv4 address. The output of
	# `host` is complex -- use sed to get the FDQN.
	host $(get_publicip_from_web_service 4) | sed "s/.*pointer \(.*\)\./\1/"
}

function get_publicip_from_web_service {
	# This seems to be the most reliable way to determine the
	# machine's public IP address: asking a very nice web API
	# for how they see us. Thanks go out to icanhazip.com.
	# See: https://major.io/icanhazip-com-faq/
	#
	# Pass '4' or '6' as an argument to this function to specify
	# what type of address to get (IPv4, IPv6).
	curl -$1 --fail --silent --max-time 15 icanhazip.com 2>/dev/null
}

function get_default_privateip {
	# Return the IP address of the network interface connected
	# to the Internet.
	#
	# Pass '4' or '6' as an argument to this function to specify
	# what type of address to get (IPv4, IPv6).
	#
	# We used to use `hostname -I` and then filter for either
	# IPv4 or IPv6 addresses. However if there are multiple
	# network interfaces on the machine, not all may be for
	# reaching the Internet.
	#
	# Instead use `ip route get` which asks the kernel to use
	# the system's routes to select which interface would be
	# used to reach a public address. We'll use 8.8.8.8 as
	# the destination. It happens to be Google Public DNS, but
	# no connection is made. We're just seeing how the box
	# would connect to it. There many be multiple IP addresses
	# assigned to an interface. `ip route get` reports the
	# preferred. That's good enough for us. See issue #121.
	#
	# With IPv6, the best route may be via an interface that
	# only has a link-local address (fe80::*). These addresses
	# are only unique to an interface and so need an explicit
	# interface specification in order to use them with bind().
	# In these cases, we append "%interface" to the address.
	# See the Notes section in the man page for getaddrinfo and
	# https://discourse.mailinabox.email/t/update-broke-mailinabox/34/9.
	#
	# Also see ae67409603c49b7fa73c227449264ddd10aae6a9 and
	# issue #3 for why/how we originally added IPv6.

	target=8.8.8.8

	# For the IPv6 route, use the corresponding IPv6 address
	# of Google Public DNS. Again, it doesn't matter so long
	# as it's an address on the public Internet.
	if [ "$1" == "6" ]; then target=2001:4860:4860::8888; fi

	# Get the route information.
	route=$(ip -$1 -o route get $target | grep -v unreachable)

	# Parse the address out of the route information.
	address=$(echo $route | sed "s/.* src \([^ ]*\).*/\1/")

	if [[ "$1" == "6" && $address == fe80:* ]]; then
		# For IPv6 link-local addresses, parse the interface out
		# of the route information and append it with a '%'.
		interface=$(echo $route | sed "s/.* dev \([^ ]*\).*/\1/")
		address=$address%$interface
	fi

	echo $address
		
}

function ufw_allow {
	if [ -z "$DISABLE_FIREWALL" ]; then
		# ufw has completely unhelpful output
		ufw allow $1 > /dev/null;
	fi
}

function restart_service {
	# Restart a service quietly.
	if [ ! "$IS_DOCKER" ]; then
		# The normal way to restart a service.
		hide_output service $1 restart
	else
 		# On docker, sysvinit is not present. Our base image provides
 		# a weird way to manage running services. But we're not going
 		# to use it. Just execute the init.d script directly.

	 	if [ "$1" == "dovecot" ]; then
			# Dovecot does not provide an init.d script. It just provides
			# an upstart init configuration. But Docker doesn't provide
			# upstart. Start Dovecot specially.
			killall dovecot
			dovecot -c /etc/dovecot/dovecot.conf
		else
	 		hide_output /etc/init.d/$1 restart
	 	fi
	fi
}

## Dialog Functions ##
function message_box {
	dialog --title "$1" --msgbox "$2" 0 0
}

function input_box {
	# input_box "title" "prompt" "defaultvalue" VARIABLE
	# The user's input will be stored in the variable VARIABLE.
	# The exit code from dialog will be stored in VARIABLE_EXITCODE.
	declare -n result=$4
	declare -n result_code=$4_EXITCODE
	result=$(dialog --stdout --title "$1" --inputbox "$2" 0 0 "$3")
	result_code=$?
}

function input_menu {
	# input_menu "title" "prompt" "tag item tag item" VARIABLE
	# The user's input will be stored in the variable VARIABLE.
	# The exit code from dialog will be stored in VARIABLE_EXITCODE.
	declare -n result=$4
	declare -n result_code=$4_EXITCODE
	local IFS=^$'\n'
	result=$(dialog --stdout --title "$1" --menu "$2" 0 0 0 $3)
	result_code=$?
}