* conf/nginx-primaryonly.conf: Use tabs instead of spaces
* management/web_update.py: Includes the tabs so they display with the correct indentation when added to the local.conf
Co-authored-by: 0pis <0pis>
--------------------------
Setup:
* When upgrading from versions before v0.40, setup will now warn that ownCloud/Nextcloud data cannot be migrated rather than failing the installation.
Mail:
* An MTA-STS policy for incoming mail is now published (in DNS and over HTTPS) when the primary hostname and email address domain both have a signed TLS certificate installed, allowing senders to know that an encrypted connection should be enforced.
* The per-IP connection limit to the IMAP server has been doubled to allow more devices to connect at once, especially with multiple users behind a NAT.
DNS:
* autoconfig and autodiscover subdomains and CalDAV/CardDAV SRV records are no longer generated for domains that don't have user accounts since they are unnecessary.
* IPv6 addresses can now be specified for secondary DNS nameservers in the control panel.
TLS:
* TLS certificates are now provisioned in groups by parent domain to limit easy domain enumeration and make provisioning more resilient to errors for particular domains.
Control Panel:
* The control panel API is now fully documented at https://mailinabox.email/api-docs.html.
* User passwords can now have spaces.
* Status checks for automatic subdomains have been moved into the section for the parent domain.
* Typo fixed.
Web:
* The default web page served on fresh installations now adds the `noindex` meta tag.
* The HSTS header is revised to also be sent on non-success responses.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEX0wOcxPM10RpOyrquSBB9MEL3YEFAl9t2AgPHGp0QG9jY2Ft
cy5pbmZvAAoJELkgQfTBC92BZNkH/1jIGoWTz0xlS+e+TeXpHoCp/7zYAvQq/a/y
vj9t1N1+bBg6Ywbd8UxyvOHwuL/UQU/5LTq6hk3gD+2ARfJUvDRbb047Xzlisg3N
LhNoVhVbsxqKP1X2ZjeIBq9DgzMavuB64Bwd5UNdceM0Addi8KuCDOMF+FNY2t8k
xytGjYdBi1/BG6SLBX+FAm5yrJghmkUJs2FnJjebSyyeV2HP3L1iBrk2N8UBd6PU
fVjde534lgygFZK/8yXJpY2olfLMYJv7CaOMxvaW6RpbMI8VeLwDLfRt5LcrQZqq
YXkuEnUI0eygbQYkeK/Vr1Vey6uQAWzIfbImEglHfvOXsZSYFXs=
=SJNM
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=VgsY
-----END PGP SIGNATURE-----
Merge v0.50 from upstream
thanks @downtownallday
* this invalidates all user_keys after TOTP status is changed for user
* after changing TOTP state, a login is required
* due to the forced login, we can't and don't need to store the code used for setup in `mru_code`
* Due to the way that the /login UI works, this persists at least one failed login each time a user logs into the admin panel. This in turn triggers fail2ban at some point.
* hmac.compare_digest() expects arguments of type string, make sure we don't pass None
* Currently, this cannot happen but we might not want to store `mru_token` during setup
* this allows implementation of other mfa schemes in the future (webauthn)
* also makes key management easier and enforces one totp credentials per user on db-level
* Only spawn a thread pool when strictly needed
For --check-primary-hostname, the pool is not used.
When exiting, the other processes are left alive and will hang.
* Acquire pools with the 'with' statement
This will make it so that the HSTS header is sent regardless of the request status code (until this point it would only be sent if "the response code equals 200, 201, 206, 301, 302, 303, 307, or 308." - according to thttp://nginx.org/en/docs/http/ngx_http_headers_module.html#add_header)
These subdomains/records are for automatic configuration of mail clients, but if there are no user accounts on a domain, there is no need to publish a DNS record, provision a TLS certificate, or create an nginx server config block.
When the management commands fail, they can print something to the standard error output.
The administrator would never notice, because it wouldn't be send to him with the usual emails.
Fixes#1763
* Create the mta_sts A/AAAA records even if there is no valid TLS certificate because we can't get a TLS certificate if we don't set up the domains.
* Make the policy id in the TXT record stable by using a hash of the policy file so that the DNS record doesn't change every day, which means no nightly notification and also it allows for longer caching by sending MTAs.
Folks didn't want certificates exposing all of the domains hosted by the server (although this can already be found on the internet).
Additionally, if one domain fails (usually because of a misconfiguration), it would be nice if not everything fails. So grouping them helps with that.
Fixes#690.
with this nginx will keep on proxying requests and serve static content
instead of passing this responsibility to proxied server
Without this the one needs to run an additional server to server static
content on the proxied url
removed explicit call of the system python, cause the file has a shebang with the mail-in-a-box shipped python.
for me the system python complaint, that it is missing some modules
Previously the notification email sent when a box's SSL certificate
is automatically updated said, "Error Provisioning TLS Certificate"
even when there was no error. This changes the subject line to "TLS
Certificate Provisioning Results", which is more accurate.
it is sometimes needed to be able to set axfr to more than just one ip address. This can be done with multiple xfr: in the secondary dns input but if you need to add an entire subnet segment (xxx.xxx.xxx.0/yy) then it will not work.
With this patch it is now possible to use a subnet as input for xfr the same way as if it was an ip address.
The resulting command had nested single quotes which doesn't work
I think this fixes all/most of the issues in #1627. I am getting a full backup, then the next time it's run I get an incremental. running from the CLI with --status looks good, --verify looks good, and --list looks good.
