Commit Graph

140 Commits

Author SHA1 Message Date
Corey Hinshaw d8316119eb Use Roundcube identities to populate Z-Push From name 2016-09-19 11:10:44 -04:00
Michael Kroes 4e3cfead46 Add HSTS to the control panel headers (#879) 2016-07-29 09:01:40 -04:00
Michael Kroes d9ac321f25 Owncloud needs more time to detect blocks. It doesn't respond as fast as the other services. Also owncloud logs UTC (since latest update) even though the timezone is not UTC. Also to detect a block, we get a timeout instead of a refused) 2016-06-27 06:03:19 -04:00
Michael Kroes 01fa8cf72c add fail2ban jails for ownCloud, postfix submission, roundcube, and the Mail-in-a-Box management daemon
(tests squashed into this commit by josh)
2016-06-06 09:13:10 -04:00
Chris Blankenship fac8477ba1 Configured Dovecot to log into its own logfile 2016-06-06 08:21:44 -04:00
Joshua Tauberer 6d259a6e12 use "127.0.0.1" throughout rather than mixing use of an IP address and "localhost"
On some machines localhost is defined as something other than 127.0.0.1, and if we mix "127.0.0.1" and "localhost" then some connections won't be to to the address a service is actually running on.

This was the case with DKIM: It was running on "localhost" but Postfix was connecting to it at 127.0.0.1. (https://discourse.mailinabox.email/t/opendkim-is-not-running-port-8891/1188/12.)

I suppose "localhost" could be an alias to an IPv6 address? We don't really want local services binding on IPv6, so use "127.0.0.1" to be explicit and don't use "localhost" to be sure we get an IPv4 address.

Fixes #797
2016-05-06 09:10:38 -04:00
Joshua Tauberer 30c89be982 merge #771 - stop fail2ban recidive emails
The emails were not deliverable anyway.
2016-04-06 19:03:44 -04:00
Tibor Blaho c5e8a975cd Fix denied ownCloud nginx locations 2016-03-31 00:07:48 +02:00
Michael Kroes 4d7229ccb0 Add documentation on why the notification was removed from the recidive jail 2016-03-26 13:37:33 +01:00
Michael Kroes 454a2b167b Stop fail2ban recidive from sending emails, like all other jails 2016-03-26 09:04:51 +01:00
Michael Kroes 44705a32b7 Never allow admin panel to be inside a frame, use both modern and old headers. Also set no content sniffing 2016-03-13 18:40:02 +01:00
Michael Kroes e343061cf4 Prevent clickjacking of management interface 2016-03-13 18:23:10 +01:00
Joshua Tauberer 8ea42847da nightly status checks could fail if any domains had non-ASCII characters
https://discourse.mailinabox.email/t/status-check-emails-empty-after-upgrading-to-v0-16/1082/3

A user on that thread suggests an alternate solution, adding `PYTHONIOENCODING=utf-8` to `/etc/environment`. Python docs say that affects stdin/out/err. But we also use these environment variables elsewhere to ensure that config files we read/write are opened with UTF8 too. Maybe all that can be simplified too.
2016-02-13 11:51:06 -05:00
Joshua Tauberer 07f9228694 Merge branch 'letsencrypt' for automatic provisioning of TLS certificates from Let's Encrypt 2016-01-09 08:58:35 -05:00
Bernard `Guyzmo` Pratz b09cbb0ca4 Fixing issue making it impossible to send mail from Z-Push
* added IMAP_SMTP_METHOD to z_push/backend_imap
 * reverting that line accidentally deleted in commit 5055ef
 * cf pull request GH-580 that commit is part of

Signed-off-by: Bernard `Guyzmo` Pratz <guyzmo+github@m0g.net>
2016-01-08 16:43:09 +00:00
Joshua Tauberer 4b4f670adf s/SSL/TLS/ in user-visible text throughout the project 2016-01-04 18:43:16 -05:00
Joshua Tauberer b6933a73fa provision and install free SSL certificates from Let's Encrypt 2016-01-04 18:43:16 -05:00
Joshua Tauberer bc79319864 Merge pull request #494 from anoma/fail2ban-recidive
Activate FAIL2BAN recidive jail
2015-12-22 08:11:19 -05:00
Joshua Tauberer 20e11bbab3 fail2ban: whitelist our machine's public ip address so status checks dont cause bans of the machine itself 2015-12-07 08:45:59 -05:00
Joshua Tauberer 4995cebc38 add additional comments explaining why the IMAP special folders are set up as they are 2015-11-01 07:30:15 -05:00
Michael Kroes 9b1e04b1e8 Merge remote-tracking branch 'upstream/master' into z-push-update 2015-10-31 03:08:54 -04:00
Michael Kroes 90836eff5b For a new user create the archive folder 2015-10-27 02:20:00 -04:00
Michael Kroes 914cf68651 Remove default comments from imap config 2015-10-25 13:26:38 -04:00
Michael Kroes 4db82d3d09 Caldav doesnt support sync tokens 2015-10-25 13:19:22 -04:00
Michael Kroes 5055ef060d Change configuration options for new version of z-push 2015-10-25 08:29:57 -04:00
Joshua Tauberer f046031b26 nginx-ssl.conf changes were partially incorrect, partial revert of 834c42bc50
My own /etc/nginx/nginx.conf was messed up, so what I thought were Ubuntu 14.04 defaults weren't, and we lost the ssl_protocols and ssl_prefer_server_ciphers settings. This puts those back.

https://discourse.mailinabox.email/t/dev-master-version-reported-as-poodle-attack-vulnerable-by-ssllabs/898
2015-10-24 11:36:18 +00:00
Joshua Tauberer 274e5ca676 let dovecot automatically create mailbox folders rather than doing it manually in the management daemon, fixes #554 2015-10-18 11:55:27 +00:00
Joshua Tauberer 834c42bc50 move nginx-ssl to be a global configuration file rather than including it into each server block 2015-09-27 17:13:11 +00:00
Joshua Tauberer 93c2258d23 let the HSTS header be controlled by the management daemon so some domains can choose to enable preload 2015-09-08 21:20:50 +00:00
anoma ae3ae0b5ba Revert to default FAIL2BAN findtime for SSH jail
I propose that the default 600s/10minute find time is a better test duration for this ban. The altered 120s findtime sounds reasonable until you consider that attackers can simply throttle to 3 attempts per minute and never be banned.

The remaining non default jail settings of maxretry = 7 and bantime = 3600 I believe are good.
2015-09-07 08:36:59 +01:00
anoma 42d657eb54 Unnecessary config item, inherited from default jail.conf 2015-09-07 08:28:54 +01:00
Joshua Tauberer 2c29d59895 Merge pull request #478 from kri3v/patch-1
Added more bantime and lowered max retry attempts
2015-09-05 11:42:36 -04:00
Stefan Dimitrov 42dd46e305 Update nginx-primaryonly.conf
Nginx should be connecting over the local interface, not to the IP the resolver gives it. Elsewhere in this file proxy_pass uses 127.0.0.1 as it should.
2015-08-28 15:07:47 -04:00
Joshua Tauberer 5f17abc856 Merge pull request #463 from PortableTech/master
outgoing_mail_header_filters use local hostname and ip
2015-07-11 17:21:55 -04:00
anoma 593fd242bf Activate FAIL2BAN recidive jail
Recidive can be thought of as FAIL2BAN checking itself. This setup will monitor the FAIL2BAN log and if 10 bans are seen within one day activate a week long ban and email the mail in a box admin that it has been applied . These bans survive FAIL2BAN service restarts so are much stronger which obviously means we need to be careful with them.

Our current settings are relatively safe and definitely not easy to trigger by mistake e.g to activate a recidive IP jail by failed SSH logins a user would have to fail logging into SSH  6 times in 10 minutes, get banned, wait for the ban to expire and then repeat this process 9 further times within a 24 hour period.

The default maxretry of 5 is much saner but that can be applied once users are happy with this jail. I have been running a stronger version of this for months and it does a very good job of ejecting persistent abusers.
2015-07-07 12:37:42 +01:00
anoma e591d9082f Ultra safe dovecot findtime and maxretry settings
Explicitly set the timings and counts for the dovecot jail rather than change the global [DEFAULT] and inherit it for this one jail. These settings are far too safe so a future PR should increase security here.
2015-07-06 13:44:53 +01:00
anoma b6f26c0f1e Revert to defaults FAIL2BAN findtime and maxretry
Reverts the remaining FAIL2BAN settings to default: findtime 600 and maxretry 3. As jail settings override default settings this was hardly being used anyway so it is better to explicitly set it per jail as and when required.
2015-07-06 13:42:41 +01:00
PortableTech 07beef3db2 outgoing_mail_header_filters use local hostname and ip
Modify outgoing_mail_header_filters and mail-postfix.sh
files to result in the primary hostname, and the public
ip of the server showing in the first mail header route
instead of unknown and 127.0.0.1.  This could help lower
the spam score of mail sent from your server to some
public mail services.
2015-07-02 16:04:56 -04:00
kri3v dd0bdef640 Added more bantime and lowered max retry attempts
Ban time was too low for preventing ssh brute force attacks, this change also allows to keep the auth.log more clean and avoid wasting cpu and i/o on this. 

Bots eventually will flag your IP as secure and move along.
2015-07-02 12:55:43 -03:00
anoma b2eaaeca4b Revert to default 6 ssh/ddos login attempts
No legitimate admin will require 20 login attempts. The default 6 is a sane middle ground especially since in 10 minutes they can try again  or immediately from another IP anyway.
2015-07-02 10:23:48 +01:00
anoma e2d9a523c3 Cleanup blank lines, comments and whitespace to make it easier to follow 2015-07-02 10:19:37 +01:00
anoma 11df1e4680 Unnecessary config item, inherited from default jail.conf 2015-07-02 10:10:50 +01:00
anoma 53d5542402 Revert to default 600 second ban time
A 60 second/1 minute ban time is not long enough to counter brute force attacks which is the main purpose of fail2ban for mail in a box. The default bantime of 10 minutes is still sane and I think we have proven fail2ban is reliable enough not to cause problems in general. It is not worth sacrificing security for the rare case where an admin locks themselves out for 10 minutes.
2015-07-02 10:08:50 +01:00
anoma bfda3f40b9 Unnecessary config item, inherited from default jail.conf 2015-07-02 09:55:59 +01:00
Joshua Tauberer 53f84a8092 set ssl_stapling_verify back to on, reverts part of 47de93961e
The sslmate guidance changed. See #458.
2015-06-27 07:14:16 -04:00
Marc Schiller 0cc20cbb97 Fixed a bug where autoconfiguration for Z-Push fails due to case of URL. 2015-06-25 11:56:33 +02:00
Joshua Tauberer be2b5a62de ownCloud updated to version 8.0.4 2015-06-14 16:04:07 +00:00
bizonix 2c90c267bd fix loop redirecting
server is redirecting the request for this address in a way that will never complete
2015-06-07 21:50:41 +03:00
Joshua Tauberer 47de93961e OCSP improvements
* Set ssl_stapling_verify to off per https://sslmate.com/blog/post/ocsp_stapling_in_apache_and_nginx ('on' has no security benefits).
* Set resolver to 127.0.0.1, instead of Google Public DNS, because we might as well use our local nameserver anyway.
* Remove the commented line which per the link above would never be necessary anyway.

OCSP seems to work just fine after these changes.
2015-06-06 23:24:09 +00:00
Joshua Tauberer 5008cc603e merge - munin system monitoring 2015-06-06 12:52:22 +00:00