--------------------------
Setup:
* When upgrading from versions before v0.40, setup will now warn that ownCloud/Nextcloud data cannot be migrated rather than failing the installation.
Mail:
* An MTA-STS policy for incoming mail is now published (in DNS and over HTTPS) when the primary hostname and email address domain both have a signed TLS certificate installed, allowing senders to know that an encrypted connection should be enforced.
* The per-IP connection limit to the IMAP server has been doubled to allow more devices to connect at once, especially with multiple users behind a NAT.
DNS:
* autoconfig and autodiscover subdomains and CalDAV/CardDAV SRV records are no longer generated for domains that don't have user accounts since they are unnecessary.
* IPv6 addresses can now be specified for secondary DNS nameservers in the control panel.
TLS:
* TLS certificates are now provisioned in groups by parent domain to limit easy domain enumeration and make provisioning more resilient to errors for particular domains.
Control Panel:
* The control panel API is now fully documented at https://mailinabox.email/api-docs.html.
* User passwords can now have spaces.
* Status checks for automatic subdomains have been moved into the section for the parent domain.
* Typo fixed.
Web:
* The default web page served on fresh installations now adds the `noindex` meta tag.
* The HSTS header is revised to also be sent on non-success responses.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEX0wOcxPM10RpOyrquSBB9MEL3YEFAl9t2AgPHGp0QG9jY2Ft
cy5pbmZvAAoJELkgQfTBC92BZNkH/1jIGoWTz0xlS+e+TeXpHoCp/7zYAvQq/a/y
vj9t1N1+bBg6Ywbd8UxyvOHwuL/UQU/5LTq6hk3gD+2ARfJUvDRbb047Xzlisg3N
LhNoVhVbsxqKP1X2ZjeIBq9DgzMavuB64Bwd5UNdceM0Addi8KuCDOMF+FNY2t8k
xytGjYdBi1/BG6SLBX+FAm5yrJghmkUJs2FnJjebSyyeV2HP3L1iBrk2N8UBd6PU
fVjde534lgygFZK/8yXJpY2olfLMYJv7CaOMxvaW6RpbMI8VeLwDLfRt5LcrQZqq
YXkuEnUI0eygbQYkeK/Vr1Vey6uQAWzIfbImEglHfvOXsZSYFXs=
=SJNM
-----END PGP SIGNATURE-----
Merge tag 'v0.50' of https://github.com/mail-in-a-box/mailinabox into master
v0.50 (September 25, 2020)
--------------------------
Setup:
* When upgrading from versions before v0.40, setup will now warn that ownCloud/Nextcloud data cannot be migrated rather than failing the installation.
Mail:
* An MTA-STS policy for incoming mail is now published (in DNS and over HTTPS) when the primary hostname and email address domain both have a signed TLS certificate installed, allowing senders to know that an encrypted connection should be enforced.
* The per-IP connection limit to the IMAP server has been doubled to allow more devices to connect at once, especially with multiple users behind a NAT.
DNS:
* autoconfig and autodiscover subdomains and CalDAV/CardDAV SRV records are no longer generated for domains that don't have user accounts since they are unnecessary.
* IPv6 addresses can now be specified for secondary DNS nameservers in the control panel.
TLS:
* TLS certificates are now provisioned in groups by parent domain to limit easy domain enumeration and make provisioning more resilient to errors for particular domains.
Control Panel:
* The control panel API is now fully documented at https://mailinabox.email/api-docs.html.
* User passwords can now have spaces.
* Status checks for automatic subdomains have been moved into the section for the parent domain.
* Typo fixed.
Web:
* The default web page served on fresh installations now adds the `noindex` meta tag.
* The HSTS header is revised to also be sent on non-success responses.
# gpg verification failed.
# Conflicts:
# .gitignore
# setup/bootstrap.sh
* conf/nginx-primaryonly.conf: Use tabs instead of spaces
* management/web_update.py: Includes the tabs so they display with the correct indentation when added to the local.conf
Co-authored-by: 0pis <0pis>
thanks @downtownallday
* this invalidates all user_keys after TOTP status is changed for user
* after changing TOTP state, a login is required
* due to the forced login, we can't and don't need to store the code used for setup in `mru_code`
* Due to the way that the /login UI works, this persists at least one failed login each time a user logs into the admin panel. This in turn triggers fail2ban at some point.
* hmac.compare_digest() expects arguments of type string, make sure we don't pass None
* Currently, this cannot happen but we might not want to store `mru_token` during setup
* this allows implementation of other mfa schemes in the future (webauthn)
* also makes key management easier and enforces one totp credentials per user on db-level
* Only spawn a thread pool when strictly needed
For --check-primary-hostname, the pool is not used.
When exiting, the other processes are left alive and will hang.
* Acquire pools with the 'with' statement
This will make it so that the HSTS header is sent regardless of the request status code (until this point it would only be sent if "the response code equals 200, 201, 206, 301, 302, 303, 307, or 308." - according to thttp://nginx.org/en/docs/http/ngx_http_headers_module.html#add_header)
These subdomains/records are for automatic configuration of mail clients, but if there are no user accounts on a domain, there is no need to publish a DNS record, provision a TLS certificate, or create an nginx server config block.
When the management commands fail, they can print something to the standard error output.
The administrator would never notice, because it wouldn't be send to him with the usual emails.
Fixes#1763
* Create the mta_sts A/AAAA records even if there is no valid TLS certificate because we can't get a TLS certificate if we don't set up the domains.
* Make the policy id in the TXT record stable by using a hash of the policy file so that the DNS record doesn't change every day, which means no nightly notification and also it allows for longer caching by sending MTAs.
Folks didn't want certificates exposing all of the domains hosted by the server (although this can already be found on the internet).
Additionally, if one domain fails (usually because of a misconfiguration), it would be nice if not everything fails. So grouping them helps with that.
Fixes#690.
Security fixes:
* Fix missing brute force login protection for Roundcube logins.
Software updates:
* Upgraded Roundcube from 1.4.2 to 1.4.4.
* Upgraded Nextcloud from 17.0.2 to 17.0.6 (with Contacts from 3.1.6 to 3.3.0 and Calendar from 1.7.1 to v2.0.3)
* Upgraded Z-Push to 2.5.2.
System:
* Nightly backups now occur on a random minute in the 3am hour (in the system time zone). The minute is chosen during Mail-in-a-Box installation/upgrade and remains the same until the next upgrade.
* Fix for mail log statistics report on leap days.
* Fix Mozilla autoconfig useGlobalPreferredServer setting.
Web:
* Add a new hidden feature to set nginx alias in www/custom.yaml.
Setup:
* Improved error handling.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEX0wOcxPM10RpOyrquSBB9MEL3YEFAl7AbCoPHGp0QG9jY2Ft
cy5pbmZvAAoJELkgQfTBC92BjbEIAIwmIpgNCT+age/SsUhDY8pjnFQWXBCl1nwa
RFN40Ev73DoBXUP+za4RE0eyCLIw5/laCwCjaESobiBTuc6boC1QU4abFUV5NfJQ
P3AnQ2qXkrtcmIQX42ge4AGsL3vMVRtjZWb+bvut2SmLB8BI5w/9XsQAS59lqSz0
kK6ShlDmFaToMgTQqwl0CW8a0vdjRca5Mq011xUZrvqTAm7ACQIvS6np4UYBGSNy
bU8O1xWMJb0HlO7f+bWCDYr1I+nRS1xXMW9pKsE08YFwcRLa+C42QkDXDuS/o/zj
EXBLGwYcB0DEu4wLLbih8xdbED2ZiMO2t6IHtbXPcoLtHo3Tv6I=
=RUkr
-----END PGP SIGNATURE-----
Merge tag 'v0.45' of https://github.com/mail-in-a-box/mailinabox
v0.45 (May 16, 2020)
Security fixes:
* Fix missing brute force login protection for Roundcube logins.
Software updates:
* Upgraded Roundcube from 1.4.2 to 1.4.4.
* Upgraded Nextcloud from 17.0.2 to 17.0.6 (with Contacts from 3.1.6 to 3.3.0 and Calendar from 1.7.1 to v2.0.3)
* Upgraded Z-Push to 2.5.2.
System:
* Nightly backups now occur on a random minute in the 3am hour (in the system time zone). The minute is chosen during Mail-in-a-Box installation/upgrade and remains the same until the next upgrade.
* Fix for mail log statistics report on leap days.
* Fix Mozilla autoconfig useGlobalPreferredServer setting.
Web:
* Add a new hidden feature to set nginx alias in www/custom.yaml.
Setup:
* Improved error handling.
with this nginx will keep on proxying requests and serve static content
instead of passing this responsibility to proxied server
Without this the one needs to run an additional server to server static
content on the proxied url
removed explicit call of the system python, cause the file has a shebang with the mail-in-a-box shipped python.
for me the system python complaint, that it is missing some modules
Previously the notification email sent when a box's SSL certificate
is automatically updated said, "Error Provisioning TLS Certificate"
even when there was no error. This changes the subject line to "TLS
Certificate Provisioning Results", which is more accurate.
-------------------------
Security fixes:
* A security issue was discovered in rsync backups. If you have enabled rsync backups, the file `id_rsa_miab` may have been copied to your backup destination. This file can be used to access your backup destination. If the file was copied to your backup destination, we recommend that you delete the file on your backup destination, delete `/root/.ssh/id_rsa_miab` on your Mail-in-a-Box, then re-run Mail-in-a-Box setup, and re-configure your SSH public key at your backup destination according to the instructions in the Mail-in-a-Box control panel.
* Brute force attack prevention was missing for the managesieve service.
Setup:
* Nextcloud was not upgraded properly after restoring Mail-in-a-Box from a backup from v0.40 or earlier.
Mail:
* Upgraded Roundcube to 1.3.10.
* Fetch an updated whitelist for greylisting on a monthly basis to reduce the number of delayed incoming emails.
Control panel:
* When using secondary DNS, it is now possible to specify a subnet range with the `xfr:` option.
* Fixed an issue when the secondary DNS option is used and the secondary DNS hostname resolves to multiple IP addresses.
* Fix a bug in how a backup configuration error is shown.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEX0wOcxPM10RpOyrquSBB9MEL3YEFAl1rrwIPHGp0QG9jY2Ft
cy5pbmZvAAoJELkgQfTBC92BgckIALFnDFxhQ18MtClpi79+rnl1aA5DqbToCuI2
MHIAOmxIVSavnd5MZZ3efXWAzIniEpbq0X+6Rlzas5lkreT1mHoJsKdkt0bOqy1a
ZF2vT5UnUM9cwPHkU1ak/TaD9v97wbHpWWGwAK+/zTL6w1ReCVfQ2QzCzoDaY7xh
OZFXE+YsaI7qZeG3Q4jfFr0IYDowLgjgBpdWvO71QKzWjIIvBNX1ZGt2r+cuKmQ5
JOXIAR4fdri0p8dMd2sqq0FatBBCfjHDBykA/+GzJJDBX7MNoZsQT3bowrhj8XPS
f5cKUKm7zlDsm02bfCtDD6nvYYUxvOdQx7yfdL8RYSdy71Chs20=
=7M/i
-----END PGP SIGNATURE-----
Merge tag 'v0.43' of https://github.com/mail-in-a-box/mailinabox
v0.43 (September 1, 2019)
-------------------------
Security fixes:
* A security issue was discovered in rsync backups. If you have enabled
rsync backups, the file `id_rsa_miab` may have been copied to your
backup destination. This file can be used to access your backup
destination. If the file was copied to your backup destination, we
recommend that you delete the file on your backup destination, delete
`/root/.ssh/id_rsa_miab` on your Mail-in-a-Box, then re-run
Mail-in-a-Box setup, and re-configure your SSH public key at your backup
destination according to the instructions in the Mail-in-a-Box control
panel.
* Brute force attack prevention was missing for the managesieve service.
Setup:
* Nextcloud was not upgraded properly after restoring Mail-in-a-Box from
a backup from v0.40 or earlier.
Mail:
* Upgraded Roundcube to 1.3.10.
* Fetch an updated whitelist for greylisting on a monthly basis to
reduce the number of delayed incoming emails.
Control panel:
* When using secondary DNS, it is now possible to specify a subnet range
with the `xfr:` option.
* Fixed an issue when the secondary DNS option is used and the secondary
DNS hostname resolves to multiple IP addresses.
* Fix a bug in how a backup configuration error is shown.
5F4C0E7313CCD744693B2AEAB92041F4C10BDD81
it is sometimes needed to be able to set axfr to more than just one ip address. This can be done with multiple xfr: in the secondary dns input but if you need to add an entire subnet segment (xxx.xxx.xxx.0/yy) then it will not work.
With this patch it is now possible to use a subnet as input for xfr the same way as if it was an ip address.
The resulting command had nested single quotes which doesn't work
I think this fixes all/most of the issues in #1627. I am getting a full backup, then the next time it's run I get an incremental. running from the CLI with --status looks good, --verify looks good, and --list looks good.
The elif needed to check to see if the string was in the listing of results of the shell command. As it was the conditional was just the string which always evaluates to true and was therefore giving a misleading error message.
* drop the ondrej/php PPA since PHP 7.x is available directly from Ubuntu 18.04
* intall PHP 7.2 which is just the "php" package in Ubuntu 18.04
* some package names changed, some unnecessary packages are no longer provided
* update paths
@joshdata squashed pull request #1398, removed some comments, and added these notes:
* The old init.d script for the management daemon is replaced with a systemd service.
* A systemd service configuration is added to configure permissions for munin on startup.
* nginx SSL settings are updated because nginx's options and defaults have changed, and we now enable http2.
* Automatic SSHFP record generation is updated to know that 22 is the default SSH daemon port, since it is no longer explicit in sshd_config.
* The dovecot-lucene package is dropped because the Mail-in-a-Box PPA where we built the package has not been updated for Ubuntu 18.04.
* The stock postgrey package is installed instead of the one from our PPA (which we no longer support), which loses the automatic whitelisting of DNSWL.org-whitelisted senders.
* Drop memcached and the status check for memcached, which we used to use with ownCloud long ago but are no longer installing.
* Other minor changes.
Passwords must be eight characters long; when passwords are changed via the users page the dialog states that passwords need to be at least four characters but only eight or more are acceptable.
The cryptography package has created all sorts of installation trouble over the last few years, probably because of mismatches between OS-installed packages and pip-installed packages. Using a virtualenv for all Python packages used by the management daemon should make sure everything is consistent.
See #1298, see #1264.
* The Mozilla recommendations must have been updated in the last few years.
* The HSTS header must have >=6 months to get an A+ at ssllabs.com/ssltest.
* [Issue #1159] Remove any +tag name in email alias before checking privileges
* Move priprivileged email check after the conversion to unicode so only IDNA serves as input
* Fixed issue with relative path for rsync relative names
Actually using the parsed URL `path` part, instead of doing a lousy split().
Renamed the `p` variable into something more sensible (`target`).
Fixes: #1019
* Added more verbose error messages upon rsync failures
fixes#1033
* Added command to test file listing
* Added support for backup to a remote server using rsync
* updated web interface to get data from user
* added way to list files from server
It’s not using the “username” field of the yaml configuration
file to minimise the amount of patches needed. So the username
is actually sorted within the rsync URL.
Signed-off-by: Bernard `Guyzmo` Pratz <guyzmo+github@m0g.net>
* Added ssh key generation upon installation for root user.
Signed-off-by: Bernard `Guyzmo` Pratz <guyzmo+github@m0g.net>
* Removed stale blank lines, and fixed typo
Signed-off-by: Bernard `Guyzmo` Pratz <guyzmo+github@m0g.net>
* fix backup-location lines, by switching it from id to class
* Various web UI fixes
- fixed user field being shadowed ;
- fixed settings reading comparaison ;
- fixed forgotten min-age field.
Signed-off-by: Bernard `Guyzmo` Pratz <guyzmo+github@m0g.net>
* Added SSH Public Key shown on the web interface UI
Signed-off-by: Bernard `Guyzmo` Pratz <guyzmo+github@m0g.net>
* trailing spaces.
Signed-off-by: Bernard `Guyzmo` Pratz <guyzmo+github@m0g.net>
* fixed the extraneous environment
Signed-off-by: Bernard `Guyzmo` Pratz <guyzmo+github@m0g.net>
* Updated key setup
- made key lower in bits, but stronger (using -a option),
- made ssh-keygen run in background using nohup,
- added independent key file, as id_rsa_miab,
- added ssh-options to all duplicity calls to use the id_rsa_miab keyfile,
- changed path to the public key display
Signed-off-by: Bernard `Guyzmo` Pratz <guyzmo+github@m0g.net>
* added rsync options for ssh identity support
Signed-off-by: Bernard `Guyzmo` Pratz <guyzmo+github@m0g.net>
* removed strict host checking for all backup operations
Signed-off-by: Bernard `Guyzmo` Pratz <guyzmo+github@m0g.net>
* Remove nohup from ssh-keygen so errors aren't hidden. Also only generate a key if none exists yet
* Add trailing slash when checking a remote backup. Also check if we actually can read the remote size
* Factorisation of the repeated rsync/ssh options
cf https://github.com/mail-in-a-box/mailinabox/pull/678#discussion_r81478919
* Updated message SSH key creation
https://github.com/mail-in-a-box/mailinabox/pull/678#discussion_r81478886
* sshfp records from nonstandard ports
If port 22 is not open, dns_update.py will not create SSHFP records
because it only scans port 22 for keys. This commit modifies
dns_update.py to parse the sshd_config file for open ports, and
then obtains keys from one of them (even if port 22 is not open).
* modified test of s per JoshData request
* edit CHANGELOG per JoshData
* fix typo
