-------------------------
Security fixes:
* A security issue was discovered in rsync backups. If you have enabled rsync backups, the file `id_rsa_miab` may have been copied to your backup destination. This file can be used to access your backup destination. If the file was copied to your backup destination, we recommend that you delete the file on your backup destination, delete `/root/.ssh/id_rsa_miab` on your Mail-in-a-Box, then re-run Mail-in-a-Box setup, and re-configure your SSH public key at your backup destination according to the instructions in the Mail-in-a-Box control panel.
* Brute force attack prevention was missing for the managesieve service.
Setup:
* Nextcloud was not upgraded properly after restoring Mail-in-a-Box from a backup from v0.40 or earlier.
Mail:
* Upgraded Roundcube to 1.3.10.
* Fetch an updated whitelist for greylisting on a monthly basis to reduce the number of delayed incoming emails.
Control panel:
* When using secondary DNS, it is now possible to specify a subnet range with the `xfr:` option.
* Fixed an issue when the secondary DNS option is used and the secondary DNS hostname resolves to multiple IP addresses.
* Fix a bug in how a backup configuration error is shown.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEX0wOcxPM10RpOyrquSBB9MEL3YEFAl1rrwIPHGp0QG9jY2Ft
cy5pbmZvAAoJELkgQfTBC92BgckIALFnDFxhQ18MtClpi79+rnl1aA5DqbToCuI2
MHIAOmxIVSavnd5MZZ3efXWAzIniEpbq0X+6Rlzas5lkreT1mHoJsKdkt0bOqy1a
ZF2vT5UnUM9cwPHkU1ak/TaD9v97wbHpWWGwAK+/zTL6w1ReCVfQ2QzCzoDaY7xh
OZFXE+YsaI7qZeG3Q4jfFr0IYDowLgjgBpdWvO71QKzWjIIvBNX1ZGt2r+cuKmQ5
JOXIAR4fdri0p8dMd2sqq0FatBBCfjHDBykA/+GzJJDBX7MNoZsQT3bowrhj8XPS
f5cKUKm7zlDsm02bfCtDD6nvYYUxvOdQx7yfdL8RYSdy71Chs20=
=7M/i
-----END PGP SIGNATURE-----
Merge tag 'v0.43' of https://github.com/mail-in-a-box/mailinabox
v0.43 (September 1, 2019)
-------------------------
Security fixes:
* A security issue was discovered in rsync backups. If you have enabled
rsync backups, the file `id_rsa_miab` may have been copied to your
backup destination. This file can be used to access your backup
destination. If the file was copied to your backup destination, we
recommend that you delete the file on your backup destination, delete
`/root/.ssh/id_rsa_miab` on your Mail-in-a-Box, then re-run
Mail-in-a-Box setup, and re-configure your SSH public key at your backup
destination according to the instructions in the Mail-in-a-Box control
panel.
* Brute force attack prevention was missing for the managesieve service.
Setup:
* Nextcloud was not upgraded properly after restoring Mail-in-a-Box from
a backup from v0.40 or earlier.
Mail:
* Upgraded Roundcube to 1.3.10.
* Fetch an updated whitelist for greylisting on a monthly basis to
reduce the number of delayed incoming emails.
Control panel:
* When using secondary DNS, it is now possible to specify a subnet range
with the `xfr:` option.
* Fixed an issue when the secondary DNS option is used and the secondary
DNS hostname resolves to multiple IP addresses.
* Fix a bug in how a backup configuration error is shown.
5F4C0E7313CCD744693B2AEAB92041F4C10BDD81
* The Mozilla recommendations must have been updated in the last few years.
* The HSTS header must have >=6 months to get an A+ at ssllabs.com/ssltest.
For HTTPS for the non-primary domains, instead of selecting an SSL certificate by expecting it to be in a directory named after the domain name (with special-case lookups
for www domains, and reusing the server certificate where possible), now scan all of the certificates that have been installed and just pick the best to use for each domain.
If no certificate is available, don't create a self-signed certificate anymore. This wasn't ever really necessary. Instead just use the server certificate.
* Use `cryptography` instead of parsing openssl's output.
* When checking if we can reuse the primary domain certificate or a www-parent-domain certificate for a domain, avoid shelling out to openssl entirely.
* Split the nginx templates again so we have just the part needed to make a domain do a redirect separate from the rest.
* Add server blocks to the nginx config for these domains.
* List these domains in the SSL certificate install admin panel.
* Generate default 'www' records just for domains we provide default redirects for.
Fixes#321.
The OVH VPS provider creates systems without /dev/stdout. I have never seen that before. But fine. We were passing it as a command line option to `openssl req`, but outputting to stdout is the default so it's not necessary to specify /dev/stdout.
Fixes#277. Also https://discourse.mailinabox.email/t/500-internal-server-error/475/10.
I changed my mind. In 1bf8f1991f I allowed Unicode domain names to go into the database. I thought that was nice because it's what the user *means*. But it's not how the web works. Web and DNS were working, but mail wasn't. Postfix (as shipped with Ubuntu 14.04 without support for SMTPUTF8) exists in an ASCII-only world. When it goes to the users/aliases table, it queries in ASCII (IDNA) only and had no hope of delivering mail if the domain was in full Unicode in the database. I was thinking ahead to SMTPUTF8, where we *could* put Unicode in the database (though that would prevent IDNA-encoded addressing from being deliverable) not realizing it isn't well supported yet anyway.
It's IDNA that goes on the wire in most places anyway (SMTP without SMTPUTF8 (and therefore how Postfix queries our users/aliases tables), DNS zone files, nginx config, CSR 'CN' field, X509 Common Name and Subject Alternative Names fields), so we should really be talking in terms of IDNA (i.e. ASCII).
This partially reverts commit 1bf8f1991f, where I added a lot of Unicode=>IDNA conversions when writing configuration files. Instead I'm doing Unicode=>IDNA before email addresses get into the users/aliases table. Now we assume the database uses IDNA-encoded ASCII domain names. When adding/removing aliases, addresses are converted to ASCII (w/ IDNA). User accounts must be ASCII-only anyway because of Dovecot's auth limitations, so we don't do any IDNA conversion (don't want to change the user's login info behind their back!). The aliases control panel page converts domains back to Unicode for display to be nice. The status checks converts the domains to Unicode just for the output headings.
A migration is added to convert existing aliases with Unicode domains into IDNA. Any custom DNS or web settings with Unicode may need to be changed.
Future support for SMTPUTF8 will probably need to add columns in the users/aliases table so that it lists both IDNA and Unicode forms.
* For non-ASCII domain names, we will keep the Unicode encoding in our users/aliases table. This is nice for the user and also simplifies things like sorting domain names (using Unicode lexicographic order is good, using ASCII lexicogrpahic order on IDNA is confusing).
* Write nsd config, nsd zone files, nginx config, and SSL CSRs with domains in IDNA-encoded ASCII.
* When checking SSL certificates, treat the CN and SANs as IDNA.
* Since Chrome has an interesting feature of converting Unicode to IDNA in <input type="email"> form fields, we'll also forcibly convert IDNA to Unicode in the domain part of email addresses before saving email addresses in the users/aliases tables so that the table is normalized to Unicode.
* Don't allow non-ASCII characters in user account email addresses. Dovecot gets confused when querying the Sqlite database (which we observed even for non-word ASCII characters too, so it may not be related to the character encoding).
This allows users to add a file /etc/nginx/conf.d/includes/mydomain.com.conf, the contents of which will be included in the server block for mydomain.com.
John Supplee
jvolkenant
Joshua Tauberer
bizonix
Sebastian Kosch
