be9d97902f
Disable encapsulation of spam and marking of it as seen
2014-10-28 15:15:21 +00:00
d790cae0e2
DNSSEC: use RSASHA256 for the .guide tld too
2014-10-23 17:03:23 +00:00
3ff74c8dc5
Add source line so dkim should actually work when run separately
2014-10-20 21:33:20 +01:00
e997114d6e
Add shebangs to enable running dkim and webmail scripts separately
2014-10-20 21:26:14 +01:00
e9aecba4df
update to roundcube 1.0.3, and really update
...
Updating existing installed was broken. The new roundcube would be copied into a subdirectory of /usr/local/lib/roundcubemail.
Also fixes the image thumbnail issue raised on the forum (https://discourse.mailinabox.email/t/roundcube-thumbnails-not-showing/136 ), see http://trac.roundcube.net/wiki/Changelog .
2014-10-20 12:48:15 +00:00
6585384daa
bring the max outgoing mail size via webmail and z-push in line with the limit set in postfix: 128 MB
...
The limit was previously the nginx default (2MB?).
fixes #236
2014-10-16 22:11:10 +00:00
8902e9d1fc
bump bootstrap to incoming v0.04 tag
2014-10-15 12:33:20 -04:00
df5df18820
fixes for bootstrap.sh for upgrading
...
* `git fetch` wasn't done right for shallow clones
* the test for whether mailinabox has already been cloned wasn't looking at the right directory if the script was not run from $HOME
2014-10-15 12:22:48 -04:00
0b5bf602aa
various improvements in bash comments
2014-10-15 11:46:20 -04:00
06e074bd32
disable SSLv3 in dovecot now that it is known to be insecure (POODLE)
...
SSLv3 is already disabled in Postfix (45e93f7dcc51dd2ed70b
2014-10-15 15:39:05 +00:00
495790d81d
still didn't get the permissions right, chmod must follow sa-learn's initial creation of files
...
see #231 , #201 , b26abc947e7ca54a2bfbdfe0a9f187
2014-10-12 18:05:04 +00:00
dfe0a9f187
clean up setup/spamassassin.sh
2014-10-12 17:57:04 +00:00
7ca54a2bfb
give dovecot antispam plugin's sa-learn-pipe script permission to write to the bayes files
...
see #231 , #201 , b26abc947e
2014-10-12 17:57:04 +00:00
b26abc947e
Change owner of spamassassin directory from mail to spampd, closes #231
2014-10-11 18:00:22 +01:00
2f4eccd9a9
add 'source /etc/mailinabox.conf' to dns.sh so it can be run separately
2014-10-08 12:48:43 +00:00
8566b78202
drop webfinger, see #95
2014-10-07 20:30:36 +00:00
711db9352c
bootstrap: apt was mangling stdin
...
When executed "cat bootstrap.sh | bash", apt-get mangled stdin. The script would terminate at the end of the if block containing apt-get (that seems to be as much as bash read from the pipe) and the remainder of the script was output to the console. This was very weird.
Ensuring that apt-get and git have their stdins redirected from /dev/null seems to fix the problem.
see #224
2014-10-05 13:40:12 -04:00
7c2092d48f
remove apache before installing nginx, see #224
2014-10-05 09:01:20 -04:00
5fd107cae5
more work on making the bash scripts readable
2014-10-04 17:57:26 -04:00
db0967446b
remove unnecessary sudos
2014-10-04 14:06:08 -04:00
2ff5038c84
replace '.' with 'source'
2014-10-04 14:05:06 -04:00
4ae76aa2dd
dnssec: use RSASHA256 keys for .email domains
2014-10-04 17:29:42 +00:00
ba33669a62
generate the locales before change to it.
...
For my german box changing the locale failed:
´´´´/bin/sh: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
/bin/sh: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
/bin/sh: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
/bin/sh: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
setup/functions.sh: line 6: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)´´´´
see #206 and 4e6d572de9closes #220
commit modified by joshdata
2014-10-02 11:05:42 +00:00
94c4352f45
Merge branch 'jmar71n-master' - site-wide bayesean spam filtering
2014-09-27 16:18:55 +00:00
6dd6353d41
move sa-learn-pipe.sh from /usr to /usr/local
2014-09-27 16:18:40 +00:00
d06bfa6c1b
tweak the site-wide bayesian spam filtering config
2014-09-27 16:18:36 +00:00
698ae03505
catch-all addresses should not have precedence over mail users
...
Aliases have precedence over mail users. A catch-all address would grab mail intended for a mail user and send it elsewhere. This adds some SQL hackery to create dummy aliases for all mail users.
fixes #200
closes #214 another way
2014-09-27 13:32:10 +00:00
a4c70f7a92
revert dovecot part of 39bca053ed because dovecot started behaving weird and I don't have time to debug it
2014-09-26 22:41:59 +00:00
39bca053ed
add 2048 bits of DH params for nginx, postfix, dovecot
...
nginx/postfix use a new pre-generated dh2048.pem file. dovecot generates the bits on its own.
ssllabs.com reports that TLS_DHE ciphers went from 1024 to 2048 bits as expected. The ECDHE ciphers remain at 256 bits --- no idea what that really means. (This tests nginx only. I haven't tested postfix/dovecot.)
see https://discourse.mailinabox.email/t/fips-ready-for-ssl-dhec-key-exchange/76/3
2014-09-26 22:09:22 +00:00
c2eb8e5330
typo in roundcube download URL
...
see 8e0967dd8e (commitcomment-7940724)
2014-09-26 14:26:45 +00:00
4e6d572de9
ensure Python operates in UTF-8 with a consistent locale for all users
...
fixes #206 (hopefully)
2014-09-26 08:26:09 -04:00
5714b3c6b7
bump bootstrap.sh to incoming 0.03 tag
2014-09-24 12:48:15 +00:00
8e0967dd8e
if an earlier version of roundcube had already been installed, update to our target version
...
fixes #195
2014-09-24 12:46:51 +00:00
ed8fb2d06d
the latest z-push introduces a new/second USE_FULLEMAIL_FOR_LOGIN parameter
...
see http://discourse.mailinabox.email/t/activesync-z-push-not-working/94/3
2014-09-24 12:24:35 +00:00
8c8d9304ac
lock z-push to a particular upstream version by fmbiete/Z-Push-contrib commit hash
2014-09-24 12:20:10 +00:00
c1ccd22531
put a start script at /usr/local/bin/mailinabox
2014-09-22 16:37:12 -04:00
01c964bfe3
update bootstrap.sh for next tag
2014-09-22 16:35:07 -04:00
6c59294e7b
more readable bash
2014-09-21 16:05:11 -04:00
9d40a12f44
first pass at making readable documentation by parsing the bash scripts
2014-09-21 13:43:31 -04:00
b5bb12d0d2
enable site-wide bayesian filtering
...
Create directory in $STORAGE_ROOT for bayes database.
Added --username arg to sa-learn as the user mail does not have permission to edit files in $STORAGE_ROOT. There is probably a better solution to this...
2014-09-20 16:07:30 +01:00
dd91553689
open the firewall to an alternative SSH port if set
...
https://discourse.mailinabox.email/t/opening-up-a-custom-port-for-ssh-after-install/55/2
2014-09-20 08:26:10 -04:00
98651deea4
python3-dev is a dependency for many pip packages, including pyyaml, fixes #196
2014-09-17 21:56:09 +00:00
467f04facb
update roundcube version
2014-09-10 12:32:32 +02:00
7ea956d3bc
install network-checks's dependencies
...
Since it runs before the real setup begins, we must make sure that packages are installed.
Also removing bind9-host's installation from system.sh. In 189dd6000efixes #180
2014-09-07 12:29:23 +00:00
6b13ac1ca9
Support more concurrent connections
2014-09-04 16:40:33 +02:00
9fd6958dc2
Revert commit "Support more concurrent connections for z-push"
2014-09-04 16:39:38 +02:00
e434bf9fce
Support more concurrent connections for z-push
...
My logs were showing lots of:
[04-Sep-2014 15:52:41] WARNING: [pool www] server reached pm.max_children setting (5), consider raising it
2014-09-04 16:11:06 +02:00
3853e8dd93
show the status of backups in the control panel
2014-09-01 13:06:53 +00:00
4ec6692f21
showing the mail-in-a-box version might fail if git isn't actually installed
...
The user might acquire the sources via some means other than a git clone. On Vagrant, the files come in via Vagrant. So test for git before running `git describe`.
2014-09-01 07:51:25 -04:00
7603ce0489
this is what I meant
2014-09-01 10:32:44 +02:00
8b2fed1a2a
fixes comments by @JoshData
2014-09-01 10:02:46 +02:00
ee244386ed
update ownCloud if necessary
...
this will always download the latest ownCloud and upgrade if ownCloud install dir exist, this apphroach allows us to keep existing user plugins. currently not checking if currently installed version is equal to the one we're downloading as I couldn't find a proper solution for that
2014-08-31 20:34:57 +02:00
cfffb38508
link-local IPv6 addresses need a '%interface' specification to be useful
2014-08-31 08:09:13 -04:00
24ff0e04b1
output/text tweaks
2014-08-27 14:42:00 +00:00
10a37cd033
add SSHFP records to DNS
2014-08-27 12:59:40 +00:00
8586723e70
Merge pull request #168 from hjjg/feature-localehandling1
...
locale-safe check if we have enough memory installed
2014-08-27 07:41:49 -04:00
da2af2ea5c
once the user has a signed SSL cert, simplify the message at the end of setup
2014-08-27 02:37:03 +00:00
6a311ee7d9
show the tag or commit the user is on in the output to aid debugging when a user posts the output somewhere
2014-08-27 02:37:03 +00:00
756ba111a3
Also swith blocksize and count at the owncloud-specific key generation to ensure get as much bytes as you wanted.
2014-08-26 22:22:43 +02:00
ab3d205ef6
Switch blocksize and count when reading from urandom with dd, to prevent getting fewer bytes for the secret key.
2014-08-26 22:16:31 +02:00
c0f4618bef
normalize some whitespace
2014-08-26 07:13:47 -04:00
245864caac
bug in the IPV6 question
2014-08-26 10:34:22 +00:00
3774f589c8
locale-safe check if we have enough memory installed
2014-08-25 23:36:55 +02:00
d1c7617cdb
Merge branch 'master' into usedialog
2014-08-25 08:26:59 -04:00
ea32af1f0e
Merge commit 'b0d6473c3c6748a68f4845324fee13f3153bc18f' into usedialog
...
Conflicts:
setup/start.sh (changes are in questions.sh now)
2014-08-25 08:26:39 -04:00
c18200d9b1
Merge commit '09d2a08ce620928d0398068197951e5acebca0f0' into usedialog
...
Conflicts:
setup/start.sh (change was already applied)
2014-08-25 08:23:28 -04:00
bf5016a8ac
bootstrap.sh: allow overring the tag to checkout by setting the TAG environment variable (helpful for debugging)
2014-08-25 08:18:46 -04:00
e0dc8ff04a
when deleting my old /usr/local/bin/mailinabox-exchange-autodiscover.php file from existing systems, don't emit an error if the file doesn't exist (added -f)
2014-08-25 08:10:54 -04:00
faf6f87a63
move the user-interactive questions and other parts of start.sh into new files
2014-08-25 08:09:37 -04:00
4ed69cbae5
replace '-t 0' test with an environment variable since '-t 0' is false when standard input has been redirected and doesn't tell us whether or not we can use dialog for input, but Vagrant must be non-interactive
2014-08-25 07:54:11 -04:00
28231ac248
Merge pull request #150 from hjjg/secretkeyfix
...
The secret key that encrypts the backups should not be world readable.
2014-08-24 17:21:38 -04:00
90c7655d82
Fix wrong permissions of backup secret. Pyhton 3 needs octal permissions.
2014-08-24 21:27:39 +02:00
6e3b04ce83
when generating SSL CSRs, using SHA256 as SHA1 is being phased out, per @konklone
2014-08-23 17:49:33 -04:00
b0d6473c3c
Merge branch 'box-in-a-name' of github.com:hjjg/mailinabox
2014-08-23 12:43:47 +00:00
03bbd25a10
re-do allow apt to perform security updates on its own
...
Move this into system.sh rather than anagement.sh.
This reverts commit eab28c97ff
2014-08-23 12:35:59 +00:00
ff8413a622
Better handling of hostname and email address recommendation.
2014-08-23 08:51:18 +02:00
ee9552734f
Fix permissions of backup secret according to Josh's comment at
...
https://github.com/mail-in-a-box/mailinabox/pull/150#issuecomment-53120156
2014-08-22 23:23:56 +02:00
a68fd6429f
The secret key that encrypts the backups should not be world readable.
2014-08-22 22:55:34 +02:00
f7c7d5b9c3
Merge pull request #146 from ls42/zpush/auto-timezone
...
Read timezone from /etc/timezone.
2014-08-21 17:21:47 -04:00
09d2a08ce6
Typo in introduction
2014-08-21 21:51:54 +02:00
9576594cfe
bootstrap script should check out a particular tag rather than master
2014-08-21 17:28:20 +00:00
76dcab3139
now that we use `dialog` for input we can pipe the bootstrap script to bash
2014-08-21 17:28:12 +00:00
7e8e104964
when asking for a CSR country code, give the user a list
2014-08-21 17:28:04 +00:00
7ea4d33e06
simplify the input_box function
2014-08-21 16:01:12 +00:00
eab28c97ff
allow apt to perform security updates on its own
2014-08-21 11:47:28 +00:00
294d19e0af
rename whats_next.py to status_checks.py
2014-08-21 10:43:55 +00:00
980b83b124
Added dialogs, so that the setup.sh can ask the user any questions even when its piped; Added additional email valdidation for the last step
2014-08-21 03:09:09 +02:00
2cab02c831
Read timezone from /etc/timezone.
2014-08-20 23:51:10 +02:00
aaea954072
remove my old Exchange autodiscover PHP script from systems
2014-08-19 11:50:00 +00:00
b6dd407aa7
z-push autodiscover should use the primary hostname for the mail server and not the domain part of the email address (both may work, but the primary hostname is more likely to have a signed SSL cert)
2014-08-19 11:49:20 +00:00
a0df18506b
use z-push autodisover instead
2014-08-19 13:03:44 +02:00
b30d7ad80a
web-based administrative UI
...
closes #19
2014-08-17 22:46:06 +00:00
04454b35c6
(merge) CardDAV, CalDAV via ownCloud and move to z-push fork fork
...
Merges branch 'owncloud' of github.com:jkaberg/mailinabox
which is pull request #135 , closes #135
thanks @jkaberg, @fmbiete, @owncloud
2014-08-17 15:31:08 -04:00
56c7d7436e
warn that generating DNSSEC keys takes a while (still slow in some virtualized environments)
2014-08-17 11:50:05 -04:00
062e8b839e
failed network checks should result in start.sh exiting with a non-zero exit status
2014-08-17 11:50:05 -04:00
7e62131fbc
a bootstrapping script to support a one-line install command
...
based on a script by @jkaberg in #141
2014-08-16 13:31:42 -04:00
e1606df237
s/joshdata/mailinabox/ due to repo moving to the org account
2014-08-16 13:16:01 +00:00
bbd35f4906
ownCloud: do cron the same way we do the others
2014-08-16 13:00:36 +00:00
ae1e69a5e3
ownCloud: code a way to add admins from our users table, but dont use it
2014-08-16 12:59:29 +00:00
9e86c67534
make setup/owncloud.sh idempotent: don't wreck user data on second run
2014-08-16 12:38:03 +00:00
277f98aac8
drop the owncloud mail app for now
2014-08-16 12:19:40 +00:00
398b538e2b
owncloud: automatically set it up with an administrator account that even the box owner doesn't have access to, because we do not want to have the user hit ownCloud's setup page on first visit
2014-08-15 23:07:20 +00:00
ca45c88a32
owncloud: set forcessl to be true to get the corret HSTS header (would be better if we could prevent ownCloud from sending one)
2014-08-15 22:32:01 +00:00
5ecbaa2b41
Merge branch 'owncloud' of github.com:jkaberg/mailinabox into owncloud
2014-08-15 18:30:17 -04:00
a10b828d5c
when modifying php.ini, use ; as the comment char not # because php emits horrid deprecation warnings otherwise
2014-08-15 18:29:05 -04:00
7024b428ad
increased timeouts so that owncloud properly loads with larger db
2014-08-13 07:30:32 +02:00
d03bc0cefa
more owncloud configuration tweaks
2014-08-13 00:30:09 +00:00
05cc63b5d5
Merge branch 'owncloud' of github.com:jkaberg/mailinabox into owncloud
...
Conflicts:
conf/nginx.conf
setup/zpush.sh
2014-08-12 23:10:51 +00:00
e828dd63e1
auto enable apps in owncloud (FINAL COMMIT!)
2014-08-12 16:45:36 +02:00
b92033cafe
install fpm instead of cgi
2014-08-12 15:39:45 +02:00
c9bf57eacd
Merge branch 'master' into owncloud (php5-fpm)
2014-08-12 13:30:55 +00:00
791e68a3af
automate more of the initial configuration
2014-08-12 13:29:44 +00:00
4d64246b22
tweak z-push/owncloud installation scripts: hide output, check if z-push needs an update, dont use /etc/timezone because its contents would need to be escaped before being passed into sed
2014-08-12 13:29:44 +00:00
9d6dc78b15
keep Roundcube working too, put owncloud at /cloud rather than at /
2014-08-12 13:29:43 +00:00
57a441a547
small script to update the mail app
2014-08-12 15:27:37 +02:00
afb09a84b7
use tools/editconf.py to edit php.ini for large file uploads
2014-08-12 14:00:28 +02:00
7396785a9a
install php5-xsl as carddav is dependent on it
2014-08-12 13:22:34 +02:00
cf4f519cc0
zpush/owncloud: inject mail using 'sendmail' not SMTP
2014-08-12 11:18:45 +00:00
654c200709
properly escape $
2014-08-12 13:12:57 +02:00
0eceb2012f
use php5-fpm rather than our own custom launcher script for PHP+FastCGI
2014-08-12 11:00:54 +00:00
9f5fd6b474
fix user_backends array
2014-08-12 12:33:42 +02:00
5cf2965633
tls instead of ssl
2014-08-12 12:04:27 +02:00
e8a1837d02
properly set correct timezone
2014-08-12 12:01:18 +02:00
7ba79effae
moved TODO
2014-08-12 11:02:13 +02:00
9d41530232
clarifications
2014-08-12 10:10:53 +02:00
a6ba2da68b
create an no-reply user to use with SMTP from ownCloud
2014-08-12 10:09:44 +02:00
17c4edb58d
add cron job for owncloud
2014-08-12 09:24:49 +02:00
7b5ebb093f
properly chmod HTMLPurifier
2014-08-12 02:04:38 +02:00
2d74fad947
restart using php5-fpm
2014-08-12 01:26:51 +02:00
01d7d4e860
restart using php5-fpm
2014-08-12 01:15:17 +02:00
bfbd85183e
hide_output dosnt work
2014-08-12 00:49:26 +02:00
1e91cb0683
well that didnt work..
2014-08-12 00:44:54 +02:00
bc48e7d871
proper indentation
2014-08-12 00:33:13 +02:00
881b693cd4
use memcache with owncloud
2014-08-12 00:10:52 +02:00
54fe92615b
include php-libawl and cleanup
2014-08-11 23:43:16 +02:00
f287ca3b6c
dont replace owncloud config if it exists (we dont want this as it will contain vital data)
2014-08-11 23:01:18 +02:00
a80c076d8f
safe apphroach, sid dosnt like special characters like %
2014-08-11 19:42:52 +02:00
1621a2940f
use sub dir
2014-08-11 19:31:05 +02:00
cc8e1fa7b7
set working dir for composer
2014-08-11 19:09:42 +02:00
d53cb88a92
update z-push with carddav and caldav support
2014-08-11 19:08:02 +02:00
3540a1677d
install php5-imap, restart php service
2014-08-11 17:59:04 +02:00
bc0c0bf0fb
owncloud config.php markup
2014-08-11 17:53:01 +02:00
51bb781ffd
fix composer.phar not finding the composer.json file
2014-08-11 17:44:30 +02:00
d324f0981a
cleanup owncloud.sh
2014-08-11 17:08:13 +02:00
0899952fe1
initial owncloud port, untested and unfinished
2014-08-11 16:24:29 +02:00
140c508ff6
increase dovecot imap_idle_notify_interval to 4 minutes
...
Doesn't seem like 2 minutes is a problem, but 4 minutes seems better. A little less bandwidth, possibly less battery usage (though we don't have evidence that's actually true), and the interval should be shorter than any peer timeouts that might occur due to inactivity
fixes #129
2014-08-10 11:39:29 +00:00
b56f82cb92
make a privileges column in the users table and mark the first user as an admin
2014-08-08 12:31:22 +00:00
880ec44a0c
if the machine didn't have resolvconf before (my box didn't after an upgrade from Ubuntu 13.xx), make sure it has it now and archive any old resolv.conf since it should now only list 127.0.0.1 for bind9
2014-08-07 14:00:16 +00:00
5db12be507
migrate the migration state from MIGRATIONID in /etc/mailinabox.conf to STORAGE_ROOT/mailinabox.version so that the data format of STORAGE_ROOT is stored in the directory itself
2014-08-03 17:44:17 -04:00
64cb00b9d6
add reject_unlisted_recipient before greylisting, fixes #127
2014-08-03 00:06:54 +00:00
b86656243f
avoid mail.log warnings about untrusted certificates on outgoing mail, fixes #124
2014-08-02 15:39:47 +00:00
cd59025979
dont ask the user for the machine's IP address if we can be sure our guess is right (trust icanhazip to give us the right answer)
2014-07-29 20:07:26 -04:00
0be92d776e
put a 15-second timeout in asking icanhazip.com for our IP address, although this limit does not seem to actually work (i.e. if I set the limit to 5 seconds, curl still hangs 10+ when I turn off my network connection)
2014-07-29 20:07:26 -04:00
168c06939d
have nsd bind to the network interaface that is connected to the Internet, rather than all non-loopback network interfaces
...
hopefully fixes #121 ; thanks for the help @sfPlayer1
2014-07-29 20:07:26 -04:00
c74bef12d2
allow for network checks to be skips in setup while testing using SKIP_NETWORK_CHECKS=1
2014-07-29 20:07:26 -04:00
6619239280
the SSL private key would be overwritten if ssl_certificate.pem file was deleted; maybe the cause of #98
2014-07-28 15:38:23 -04:00
834a7b9096
run network checks during setup and stop if there is a bad condition
...
* check that the PUBLIC_IP is not listed in zen.spamhaus.org
* check that the PRIMARY_HOSTNAME is not listed in dbl.spamhaus.org
* check that a connection to Google's MTA is working (i.e. we're not on a residential network that blocks outbound port 25)
2014-07-26 11:26:59 -04:00
86ec0f6da7
the cron job to re-sign DNSSEC zones was still not working because the script needed a hash-bang line; what I did in 65c3a44e63 didn't actually fix the problem
2014-07-25 12:15:30 +00:00
f50cf10249
also accept Ubuntu 14.04.1 LTS, the point release that people are automatically pushed to
...
fixes #116
2014-07-22 21:36:59 +00:00
621fcc2233
use /dev/random for crypto-grade RNG with the help of haveged
...
Rather than pass `-r /dev/random` to ldns-keygen (it was `-r /dev/urandom`),
don't pass `-r` at all since /dev/random is the default.
Merges branch 'master' of github.com:pysiak/mailinabox
2014-07-21 07:31:14 -04:00
69f0e1d07a
Use /dev/random instead of /dev/urandom
...
/dev/random should be used for crypto-grade RNG.
To make sure use of /dev/random doesn't stall due to lack of entropy, install haveged which fills the entropy pool with sources such as network traffic, key strokes, etc.
On branch master
Your branch is up-to-date with 'origin/master'.
Changes to be committed:
modified: setup/dns.sh
modified: setup/system.sh
modified: setup/webmail.sh
2014-07-20 23:14:13 +02:00
65c3a44e63
the cron job to re-sign DNSSEC zones wasnt working after adding the API key to the management daemon because the script relied on a bash-ism but cron runs it with (probably) sh
2014-07-19 16:31:05 +00:00
91cf45c843
add a comment
2014-07-16 09:39:13 -04:00
023cd12e1a
hide lots of unnecessary and scary output during setup
2014-07-16 09:36:56 -04:00
465aaf2d30
check that we're running as root before doing anything
2014-07-16 09:36:31 -04:00
5a4f5b1874
move the welcome message to after the system checks
2014-07-16 09:36:31 -04:00
c716fd27bf
refuse to start if the system has less than 768 MB of RAM, except when testing within Vagrant
2014-07-16 09:36:31 -04:00
4e5b5f2852
Vagrant typo
2014-07-16 09:36:31 -04:00
9b887d2e63
Use $STORAGE_ROOT
...
Better to use $STORAGE_ROOT instead of hardcoded /home/user-data/
2014-07-16 15:33:40 +02:00
fb357dee33
add z-push to the start script
2014-07-12 00:04:56 +00:00
2a7669a0d3
z-push: an Exchange ActiveSync server
2014-07-12 00:02:32 +00:00
67c7391546
Roundcube's classic skin is nicer
2014-07-11 21:52:46 +00:00
85bd2c8804
use the Dovecot managesieve service to manage sieve scripts
...
This lets roundcube's manageseive plugin do cool things like vacation responses.
Also:
* Run the spam filtering sieve script out of a global sieve file that we'll place in /etc/dovecot. It is no longer necessary to create per-user sieve files for this. Remove them with a new migration. Remove the code that created them.
* Corrects the spam script. Backslashes were double-escaped probably because this script started embedded within the bash script. Not sure how this was working until now.
this adapts work by @h8h in #103
2014-07-10 23:09:07 +00:00
e713af5f5a
refactor the mail setup scripts
...
As the scripts keep growing, it's time to split them up to
keep them understandable.
This splits mail.sh into mail-postfix.sh, mail-dovecot.sh,
and mail-users.sh, which has all of the user database-related
configurations shared by Dovecot and Postfix. Also from
spamassassin.sh the core sieve configuration is moved into
mail-dovecot.sh and the virtual transport setting is moved
into mail-postfix.sh.
Also revising one of the sed scripts in mail-dovecot to
not insert a new additional # at the start of a line each
time the script is run.
2014-07-10 12:49:28 +00:00
6f51b49671
remove the hard-coded migration ID from setup.sh
2014-07-10 12:49:19 +00:00
41b3df6d78
manage hostmaster@ and postmaster@ automatically, create administrator@ during setup instead
...
closes #94
2014-07-09 19:30:17 +00:00
3bab63d4ce
update to Roundcube 1.0.1
2014-07-08 00:37:53 +00:00
3d4eadd436
the new migration management in c8856f107d left out the part where we actually keep the system's current MIGRATIONID... it was being lost when setup/start.sh was re-run
2014-07-07 11:29:21 +00:00
cf7053c124
set nginx server_names_hash_bucket_size to 64, fixes #93
2014-07-07 11:23:41 +00:00
c8856f107d
migrate the SSL certificates path for non-primary certs to a new layout using a new migration script
2014-06-30 20:41:29 +00:00
b5aa1b0f31
walk the user through choosing the PRIMARY_HOSTNAME by first asking for their email address
2014-06-30 10:20:58 -04:00
fed5959288
s/PUBLIC_HOSTNAME/PRIMARY_HOSTNAME/ throughout
2014-06-30 09:15:36 -04:00
573faa2bf5
install the backup script as a daily cron job
2014-06-26 10:46:22 +00:00
f8cd2bb805
typo: www/default/index.html would be overwritten if it already exists
2014-06-23 19:43:19 +00:00
1dec8c65ce
move the SSH password login check into whats_next.py (it used to be in start.sh and then moved to an unused script when it became a problem for Vagrant)
2014-06-23 19:39:20 +00:00
d4ce50de86
new tool to purchase and install a SSL certificate using Gandi.net's API
2014-06-23 10:53:29 +00:00
45e93f7dcc
strengthen the cyphers and protocols allowed by Dovecot and Postfix submission
2014-06-22 19:03:11 +00:00
4668367420
first pass at a management tool for checking what the user must do to finish his configuration: set NS records, DS records, sign his certificates, etc.
2014-06-22 15:54:22 +00:00
ec6c7d84c1
dont ask for a CSR country code on second runs because the CSR is already generated and any new country code won't be used anyway
2014-06-22 15:36:14 +00:00
d100a790a0
Remove API_KEY_FILE setting
2014-06-22 08:45:29 -04:00
554a28479f
Merge remote-tracking branch 'upstream/master' into mgmt-auth
...
Conflicts:
management/daemon.py
2014-06-21 21:29:25 -04:00
88e496eba4
Update setup scripts to auth against the API
2014-06-22 00:02:52 +00:00
067052d4ea
Add key-based authentication to management service
...
Intended to be the simplest auth possible: every time the service
starts, a random key is written to `/var/lib/mailinabox/api.key`. In
order to authenticate to the service, the client must pass the contents
of `api.key` in an HTTP basic auth header. In this way, users who do not
have read access to that file are not able to communicate with the
service.
2014-06-21 23:42:48 +00:00
67d31ed998
move the SSL setup into its own bash script since it is used for much more than email now
2014-06-21 22:16:46 +00:00
0ab43ef4fd
have webfinger output a JSON file in STORAGE_ROOT/webfinger/(acct/..)
2014-06-21 17:08:18 +00:00
326cc2a451
obviously put our stuff in /usr/local and not /usr
2014-06-21 12:35:00 -04:00
85169dc960
preliminary support for webfinger
...
It just echos back the subject given to it.
2014-06-20 01:55:16 +00:00
5faa1cae71
manage the nginx conf in the management daemon too so we can have nginx operate on all domains that we serve mail for
2014-06-20 01:55:12 +00:00
782ad04b10
use DANE when sending mail: if the recipient MX has a DANE TLSA record in DNS then Postfix will necessarily encrypt the mail in transport
2014-06-19 01:58:14 +00:00
afb6c26c8b
run bind9 on the loopback interface for ensuring we are using a DNSSEC-aware nameserver to resolve our own DNS queries (i.e. when sending mail) since we can't trust that the network configuration provided for us gives us a DNSSEC-aware DNS server
...
see #71
2014-06-18 19:45:47 -04:00
33f06f29c1
let the user override some DNS records
2014-06-17 22:21:51 +00:00
88709506f8
add DNSSEC
...
* sign zones
* in a cron job, periodically re-sign zones because they expire (not tested)
2014-06-17 22:21:12 +00:00
c925f72b0b
remove obsoleted parts of setup/dns.sh
...
Now that dns_update is a part of the management daemon, we no
longer are using STORAGE_ROOT/dns for anything.
2014-06-12 20:18:55 -04:00
d28d07f78e
increase the postfix message size limit from 10MB to 128MB
2014-06-10 10:21:43 +00:00
cad868c6c9
reorganize mail.sh a little
2014-06-10 10:19:49 +00:00
5490142df5
re-do the backup script to use the duplicity program
...
Duplicity will manage the process of creating incremental backups for us.
Although duplicity can both encrypt & copy files to a remote host, I really
don't like PGP and so I don't want to use that.
Instead, we'll back up to a local directory unencrypted, then manually
encrypt the full & incremental backup files. Synchronizing the encrypted
backup directory to a remote host is a TODO.
2014-06-09 09:34:52 -04:00
70bd96f643
Merge pull request #70 from mkropat/ipv6-support
...
Support dual-stack IPv4/IPv6 mail servers
2014-06-08 19:03:33 -04:00
fb957d2de7
Populate default values before echoing help text
...
Testing showed that it may take a few seconds for the default values to
populate. If the help text is shown, “Enter the public IP address…,”
but no prompt is shown, the user may get confused and try to enter the
IP address before mailinabox has had a chance to figure out and display
a suitable default value.
2014-06-08 18:44:08 -04:00
cd1802fecc
Filter privacy-sensitive headers on outgoing mail
...
This re-implements part of PR #69 by @mkropat, who wrote:
By default, Postfix adds a Received header — on all mail that you send —
that lists the IP of the device you sent the mail from. This feature is
great if you're a mail provider and you need to debug why one user is
having sending issues. This feature is not so great if you run your own
mail server and you don't want every recipient of every email you send
to know the device and IP you sent the email from.
To limit this filtering to outgoing mail only, we apply the filters just
to the submission port. See these guides [1] [2] for more context.
[1] http://askubuntu.com/a/78168/11259
[2] http://www.void.gr/kargig/blog/2013/11/24/anonymize-headers-in-postfix/
2014-06-08 18:35:09 -04:00
ae67409603
Support dual-stack IPv4/IPv6 mail servers
...
Addresses #3
Added support by adding parallel code wherever `$PUBLIC_IP` was used.
Providing an IPv6 address is completely optional.
Playing around on my IPv6-enabled mail server revealed that — before
this change — mailinabox might try to use an IPv6 address as the value
for `$PUBLIC_IP`, which wouldn't work out well.
2014-06-08 18:32:52 -04:00
2c4212fa36
use editconf.py to mangle /etc/postfix/master.cf
...
* using it to enable the Postfix submission service
* per @mkropat's suggestion in #69 , set an option to distinguish submission from regular smpd in syslog by giving submission a new name (doing this here to test that editconf is working right on master.cf)
2014-06-08 17:31:12 -04:00
42bf624045
Protect private key from being world-readable
...
Postfix, Dovecot, and nginx all read the key file while they're running
as root — before dropping permissions — so no authorization is needed on
the private key file beyond being root-readable.
2014-06-07 19:40:50 -04:00
b60ca25e53
add comments to the new get_default_hostname etc. functions, and simplify the logic in the Vagrantfile and start.sh so that we always call into the same two functions
2014-06-07 14:57:03 -04:00
43ef49c737
Improve hostname/IP default values
...
Default IP+hostname values were incorrect for my VPS provider. I
improved the detection, which should give correct results results for
almost any provider. Specific issues addressed:
- icanhazip.com detection was only enabled in non-interactive mode
- `hostname` is by convention a short (non-fqdn) name in Ubuntu
- `hostname --fqdn` fails if provider does not pouplate `hosts` file
- `hostname -i` fails if provider does not populate `hosts` file
- `curl` without `--fail` will someday return crazy results
when icanhazip.com returns 500 errors or similar
2014-06-07 14:11:42 -04:00
f1dac1fe13
show less output when updating DNS configuration
2014-06-06 10:51:36 -04:00
f9c3f33e74
move the SSH password login check out of setup because it interfers with Vagrant and into a separate script that we'll use for auditing in a later phase
2014-06-06 10:51:36 -04:00
cab7321dbb
remove vestigal docker compatibility that prevented starting services during setup
2014-06-04 20:04:26 -04:00
295981828f
Vagrantize
...
* adding a Vagrantfile
* in a non-interactive setup like this, create the user's first email account for them
* let the machine auto-detect its IP address using http://icanhazip.com/
* use our own justtesting.email domain to provision a subdomain for users so they can quickly get started
2014-06-04 19:39:58 -04:00
2f0d036504
the bc package is no longer needed since redoing dns_update
2014-06-04 17:27:01 -04:00
a35fa12465
script to check the SSL certificate, with instructions for turning the self-signed certificate into a properly signed certificate
2014-06-04 11:38:20 +00:00
ea62c2419d
typo in updating DKIM, dont regenerate the DKIM private key each time setup is run
2014-06-03 21:42:33 +00:00
2a9349a64e
show the SSL certificate's fingerprint during setup so the user can sort of pin it
2014-06-03 21:39:49 +00:00
bb7905aefd
on second and later runs of start.sh, recall the inputs the user entered the last time
2014-06-03 21:31:13 +00:00
24edd5ce91
the SSL CSR must be generated with a country code
2014-06-03 21:17:10 +00:00
89730bd643
new backup script, see #11
2014-06-03 21:16:38 +00:00
c54b0cbefc
move management into a daemon service running as root
...
* Created a new Python/flask-based management daemon.
* Moved the mail user management core code from tools/mail.py to the new daemon.
* tools/mail.py is a wrapper around the daemon and can be run as a non-root user.
* Adding a new initscript for the management daemon.
* Moving dns_update.sh to the management daemon, called via curl'ing the daemon's API.
This also now runs the DNS update after mail users and aliases are added/removed,
which sets up new domains' DNS as needed.
2014-06-03 13:56:40 +00:00
da15ae5375
rename the scripts directory to setup
2014-06-03 11:12:38 +00:00
David Piggott
Joshua Tauberer
h8h
jmar71n
Bretos
Joel Kåberg
Helmuth Gronewold
Christian Koptein
Stephan Brauer
jkaberg
solt
Michael Kropat