Merge master

setup/munin.sh

@@ -7,7 +7,8 @@ source /etc/mailinabox.conf # load global vars
 
 # install Munin
 echo "Installing Munin (system monitoring)..."
-apt_install munin munin-node
+apt_install munin munin-node libcgi-fast-perl
+# libcgi-fast-perl is needed by /usr/lib/munin/cgi/munin-cgi-graph
 
 # edit config
 cat > /etc/munin/munin.conf <<EOF;
@@ -19,6 +20,9 @@ tmpldir /etc/munin/templates
 
 includedir /etc/munin/munin-conf.d
 
+# path dynazoom uses for requests
+cgiurl_graph /admin/munin/cgi-graph
+
 # a simple host tree
 [$PRIMARY_HOSTNAME]
 address 127.0.0.1
@@ -29,6 +33,10 @@ contact.admin.command mail -s "Munin notification ${var:host}" administrator@$PR
 contact.admin.always_send warning critical
 EOF
 
+# The Debian installer touches these files and chowns them to www-data:adm for use with spawn-fcgi
+chown munin. /var/log/munin/munin-cgi-html.log
+chown munin. /var/log/munin/munin-cgi-graph.log
+
 # ensure munin-node knows the name of this machine
 tools/editconf.py /etc/munin/munin-node.conf -s \
 	host_name=$PRIMARY_HOSTNAME

setup/preflight.sh

@@ -46,3 +46,17 @@ if [ -e ~/.wgetrc ]; then
 	echo "Mail-in-a-Box expects no overrides to wget defaults, ~/.wgetrc exists"
 	exit
 fi
+
+# Check that we are running on x86_64, any other architecture is unsupported and
+# will fail later in the setup when we try to install the custom build lucene packages.
+#
+# Set ARM=1 to ignore this check if you have built the packages yourself. If you do this
+# you are on your own!
+ARCHITECTURE=$(uname -m)
+if [ "$ARCHITECTURE" != "x86_64" ]; then
+if [ -z "$ARM" ]; then
+	echo "Mail-in-a-Box only supports x86_64 and will not work on any other architecture, like ARM."
+	echo "Your architecture is $ARCHITECTURE"
+	exit
+fi
+fi

setup/spamassassin.sh

@@ -78,9 +78,13 @@ tools/editconf.py /etc/spamassassin/local.cf -s \
 # * Writable by the debian-spamd user, which runs /etc/cron.daily/spamassassin.
 #
 # We'll have these files owned by spampd and grant access to the other two processes.
+#
+# Spamassassin will change the access rights back to the defaults, so we must also configure
+# the filemode in the config file.
 
 tools/editconf.py /etc/spamassassin/local.cf -s \
-	bayes_path=$STORAGE_ROOT/mail/spamassassin/bayes
+	bayes_path=$STORAGE_ROOT/mail/spamassassin/bayes \
+	bayes_file_mode=0660
 
 mkdir -p $STORAGE_ROOT/mail/spamassassin
 chown -R spampd:spampd $STORAGE_ROOT/mail/spamassassin

setup/start.sh

@@ -24,6 +24,9 @@ export LC_ALL=en_US.UTF-8
 export LANG=en_US.UTF-8
 export LC_TYPE=en_US.UTF-8
 
+# Fix so line drawing characters are shown correctly in Putty on Windows. See #744.
+export NCURSES_NO_UTF8_ACS=1
+
 # Recall the last settings used if we're running this a second time.
 if [ -f /etc/mailinabox.conf ]; then
 	# Run any system migrations before proceeding. Since this is a second run,

setup/system.sh

@@ -25,6 +25,60 @@ echo $PRIMARY_HOSTNAME > /etc/hostname
 hostname $PRIMARY_HOSTNAME
 sed -i "s/127\.0\.1\.1.*/127.0.1.1\t$PRIMARY_HOSTNAME/" /etc/hosts
 
+# ### Add swap space to the system
+
+# If the physical memory of the system is below 2GB it is wise to create a
+# swap file. This will make the system more resiliant to memory spikes and
+# prevent for instance spam filtering from crashing
+
+# We will create a 1G file, this should be a good balance between disk usage
+# and buffers for the system. We will only allocate this file if there is more
+# than 5GB of disk space available
+
+# The following checks are performed:
+# - Check if swap is currently mountend by looking at /proc/swaps
+# - Check if the user intents to activate swap on next boot by checking fstab entries.
+# - Check if a swapfile already exists
+# - Check if the root file system is not btrfs, might be an incompatible version with
+#   swapfiles. User should hanle it them selves.
+# - Check the memory requirements
+# - Check available diskspace
+
+# See https://www.digitalocean.com/community/tutorials/how-to-add-swap-on-ubuntu-14-04
+# for reference
+
+SWAP_MOUNTED=$(cat /proc/swaps | tail -n+2)
+SWAP_IN_FSTAB=$(grep "swap" /etc/fstab)
+ROOT_IS_BTRFS=$(grep "\/ .*btrfs" /proc/mounts)
+TOTAL_PHYSICAL_MEM=$(head -n 1 /proc/meminfo | awk '{print $2}')
+AVAILABLE_DISK_SPACE=$(df / --output=avail | tail -n 1)
+if
+	[ -z "$SWAP_MOUNTED" ] &&
+	[ -z "$SWAP_IN_FSTAB" ] &&
+	[ ! -e /swapfile ] &&
+	[ -z "$ROOT_IS_BTRFS" ] &&
+	[ $TOTAL_PHYSICAL_MEM -lt 1900000 ] &&
+	[ $AVAILABLE_DISK_SPACE -gt 5242880 ]
+then
+	echo "Adding a swap file to the system..."
+
+	# Allocate and activate the swap file. Allocate in 1KB chuncks
+	# doing it in one go, could fail on low memory systems
+	dd if=/dev/zero of=/swapfile bs=1024 count=$[1024*1024] status=none
+	if [ -e /swapfile ]; then
+		chmod 600 /swapfile
+		hide_output mkswap /swapfile
+		swapon /swapfile
+	fi
+
+	# Check if swap is mounted then activate on boot
+	if swapon -s | grep -q "\/swapfile"; then
+		echo "/swapfile   none    swap    sw    0   0" >> /etc/fstab
+	else
+		echo "ERROR: Swap allocation failed"
+	fi
+fi
+
 # ### Add Mail-in-a-Box's PPA.
 
 # We've built several .deb packages on our own that we want to include.

setup/webmail.sh

@@ -51,7 +51,7 @@ fi
 if [ $needs_update == 1 ]; then
 	# install roundcube
 	wget_verify \
-		https://downloads.sourceforge.net/project/roundcubemail/roundcubemail/$VERSION/roundcubemail-$VERSION.tar.gz \
+		https://s3.amazonaws.com/joshdata/mail-in-a-box/public/roundcubemail-$VERSION.tar.gz \
 		$HASH \
 		/tmp/roundcube.tgz
 	tar -C /usr/local/lib --no-same-owner -zxf /tmp/roundcube.tgz