Drop the stale open-work claim from the TODO status section

The milestone is the authoritative count and the section already says
so; the lead-in asserted work remaining independently of it.

README.md

@@ -71,8 +71,18 @@ make clean      # Remove bin/
 ### Configuration
 
 All configuration is via environment variables. For local development,
-you can place variables in a `.env` file in the project root (loaded
-automatically via `godotenv/autoload`).
+you can place variables in a `.env` file in the process working
+directory, read once at startup before anything else looks at the
+environment.
+
+The file is optional and having none is the normal case for a
+deployment. A file that is there but cannot be parsed aborts startup
+with a message naming it, because a single malformed line makes none
+of the file apply: every variable in it silently reverts to its
+default, which is exactly the failure [Invalid values abort
+startup](#invalid-values-abort-startup) exists to prevent, for all of
+them at once. A variable already present in the real environment wins
+over the file's value for the same name.
 
 The environment is selected by setting `WEBHOOKER_ENVIRONMENT` to `dev`
 or `prod` (default: `dev`). The setting controls exactly one behavior:
@@ -125,7 +135,7 @@ TTY detection, and security headers are always applied.
 | `MAINTENANCE_MODE`      | Report `maintenanceMode: true` in the healthcheck JSON. It does not change how any request is served — no maintenance page exists | `false`  |
 | `METRICS_USERNAME`      | Basic auth username for `/metrics`. Must be set together with `METRICS_PASSWORD`; one without the other fails startup | `""`     |
 | `METRICS_PASSWORD`      | Basic auth password for `/metrics`. Must be set together with `METRICS_USERNAME`; one without the other fails startup | `""`     |
-| `SENTRY_DSN`            | Sentry error reporting DSN          | `""`     |
+| `SENTRY_DSN`            | Sentry error reporting DSN. Unset leaves error reporting off; a value the Sentry SDK cannot parse fails startup rather than serving with reporting silently off | `""`     |
 | `RETENTION_SWEEP_INTERVAL` | How often the retention reaper and archive sweeper run (Go duration, must be positive) | `1h` |
 | `SESSION_IDLE_TIMEOUT`  | Idle session timeout (Go duration)  | `24h`    |
 | `RECEIVER_RATE_LIMIT`   | Receiver requests/minute per IP per entrypoint (10x that per IP across the route) | `120` |
@@ -464,10 +474,20 @@ startup), every entry in `TRUSTED_PROXIES` and
 `ALLOWED_EGRESS_CIDRS` must be a CIDR block or a bare IP address, and
 `BIND_ADDRESS` must be an IP address literal — `localhost`,
 `127.0.0.1:8080` and `10.0.0.0/8` are each rejected rather than
-resolved, split, or narrowed to something they do not say.
+resolved, split, or narrowed to something they do not say — and
+`SENTRY_DSN` must parse as a Sentry DSN.
 `SESSION_IDLE_TIMEOUT` is the exception: a
 non-positive value there means idle expiry is disabled, not invalid.
 
+`SENTRY_DSN` is checked with the Sentry SDK's own parser, the same call
+the SDK makes on the DSN it is later handed, so what configuration
+accepts is exactly what will initialise. A typo in it is the one
+configuration mistake nothing downstream can ever notice — the variable
+is still set, so every later signal reports error reporting as on while
+no report is being sent — which is why it aborts rather than starting
+with reporting off. Leaving it unset is not a mistake and not affected:
+error reporting is simply off and startup is normal.
+
 Boolean variables (`DEBUG`, `MAINTENANCE_MODE`) accept exactly the
 spellings Go's `strconv.ParseBool` accepts — `1`, `t`, `T`, `TRUE`,
 `true`, `True`, `0`, `f`, `F`, `FALSE`, `false`, `False` — and nothing
@@ -1214,6 +1234,16 @@ webhooker solves this by acting as a durable intermediary:
    backoff. Every delivery attempt is logged with status codes, response
    bodies, and timing.
 
+   **That guarantee is at-least-once, not exactly-once.** When a send
+   reaches its target but the write recording that outcome fails, the
+   delivery is deliberately left in a recoverable state rather than
+   marked done — losing a delivery is the worse failure — so the
+   pending sweep picks it up about fifteen minutes later, or the next
+   restart does, and the target receives a payload it already got.
+   webhooker adds no delivery identifier of its own to an outbound
+   request, so **make your receiver idempotent** against whatever the
+   payload itself carries.
+
 3. **Observability** — Full request/response logging for every webhook
    received and every delivery attempted. Prometheus metrics expose
    volume, latency, and error rates. The web UI provides real-time
@@ -2596,12 +2626,15 @@ abuse limit later; they are tracked as future work.
 | `POST` | `/source/{id}/edit`      | Edit webhook submission |
 | `POST` | `/source/{id}/delete`    | Delete webhook |
 | `GET`  | `/source/{id}/logs`      | Webhook event logs |
+| `GET`  | `/source/{id}/logs/{eventID}/body` | Download an event's full stored body. The log page renders each body only up to its cap, so this is the only route that serves a whole one; it is offered wherever a body is shown truncated |
 | `POST` | `/source/{id}/deliveries/{deliveryID}/replay` | Replay a finished delivery: creates a new delivery for the same event against the target's current configuration (30 per minute per bucket, then `429`) |
 | `POST` | `/source/{id}/events/{eventID}/resubmit` | Resubmit a stored event: creates a new event copying it and fans that out to every currently active target (30 per minute per bucket, then `429`) |
 | `POST` | `/source/{id}/entrypoints` | Add entrypoint to webhook |
 | `POST` | `/source/{id}/entrypoints/{entrypointID}/delete` | Delete an entrypoint |
 | `POST` | `/source/{id}/entrypoints/{entrypointID}/toggle` | Enable or disable an entrypoint |
 | `POST` | `/source/{id}/targets`   | Add target to webhook |
+| `GET`  | `/source/{id}/targets/{targetID}/edit` | Edit target form. The one page that renders a target's destination URL and header values in full, rather than masked |
+| `POST` | `/source/{id}/targets/{targetID}/edit` | Edit target submission |
 | `POST` | `/source/{id}/targets/{targetID}/delete` | Delete a target |
 | `POST` | `/source/{id}/targets/{targetID}/toggle` | Enable or disable a target |
 
@@ -2640,6 +2673,8 @@ webhooker/
 ├── internal/
 │   ├── banner/
 │   │   └── banner.go          # Ruled block for the one credential shown in the clear
+│   ├── ciscript/
+│   │   └── doc.go             # Tests for the CI shell scripts in script/; no runtime code
 │   ├── resetpw/
 │   │   └── resetpw.go         # `webhooker resetpw`: set an account's password, stopped deployments only
 │   ├── config/
@@ -2709,13 +2744,17 @@ webhooker/
 │   │   ├── ratelimit.go       # Per-IP rate limiting middleware (go-chi/httprate)
 │   │   ├── loginguard.go      # Login failure counters and the Argon2id verification semaphore
 │   │   └── testing.go         # NewForTest: Middleware without the fx lifecycle
+│   ├── reqtls/
+│   │   └── reqtls.go          # IsTLS: the one TLS predicate, r.TLS or X-Forwarded-Proto
 │   ├── server/
 │   │   ├── server.go          # Server struct, fx lifecycle, signal handling
 │   │   ├── http.go            # HTTP server setup with timeouts
 │   │   └── routes.go          # All route definitions
-│   └── session/
-│       ├── session.go         # Cookie-based session management
-│       └── testing.go         # NewForTest: Session without the fx lifecycle
+│   ├── session/
+│   │   ├── session.go         # Cookie-based session management
+│   │   └── testing.go         # NewForTest: Session without the fx lifecycle
+│   └── versionscript/
+│       └── doc.go             # Tests for script/version and the build files that use it
 ├── static/
 │   ├── static.go              # //go:embed directive
 │   ├── css/input.css          # Tailwind input, source for tailwind.css (make css)

TODO.md

@@ -18,18 +18,27 @@ Issue branches do NOT touch this file — the manager maintains it on
 
 # Status
 
-1.0.0 is open, with work remaining. The milestone
-(https://git.eeqj.de/sneak/webhooker/milestone/9) is the authoritative
-list, and the only place to read a count or a state of play from. This
-file records where the project is, not what is in flight: a sentence
-whose truth depends on a branch being unmerged is wrong the moment it
-merges, and this file has been wrong that way before.
+The milestone (https://git.eeqj.de/sneak/webhooker/milestone/9) is the
+authoritative list, and the only place to read a count or a state of
+play from. This file records where the project is, not what is in
+flight: a sentence whose truth depends on a branch being unmerged is
+wrong the moment it merges, and this file has been wrong that way
+before.
 
-The tag is held on a durability defect
-(https://git.eeqj.de/sneak/webhooker/issues/256): a concurrent reader
-of a per-webhook event database strands delivered webhooks at
-`pending`, and the next restart re-delivers them. That issue gates
-`v1.0.0`, and is where the fix's own state is tracked.
+The durability defect that held the tag has landed
+(https://git.eeqj.de/sneak/webhooker/issues/256, commit `8d64259`).
+Every SQLite handle opens with WAL journaling and a busy timeout, a
+bookkeeping write that fails leaves its delivery in a recoverable
+state rather than a lying one, and recovery skips a delivery that
+already has a successful result row. Final pre-tag verification
+exercised it and confirmed it holds. Whatever the milestone still
+shows open is what remains before `v1.0.0`.
+
+Delivery is at-least-once by design, not by accident: a send whose
+result row does not land is attempted again, so a receiver can see a
+duplicate. That is deliberate — the alternative is a silent lost
+delivery — and the README says so under Rationale. It is not a defect
+to re-file.
 
 One caveat on reading a green check: a docs-only commit deliberately
 replays from the layer cache
@@ -39,11 +48,11 @@ commit invalidates the `COPY` layer and genuinely executes.
 
 # Next Step
 
-Land https://git.eeqj.de/sneak/webhooker/issues/256, then clear the
-rest of the open 1.0.0 milestone and tag `v1.0.0`. Merging `next` into
-`main` is a separate act from tagging and waits on neither of those:
-`next` is kept mergeable at all times, which is the point of the
-branch.
+Clear the rest of the open 1.0.0 milestone
+(https://git.eeqj.de/sneak/webhooker/milestone/9) and tag `v1.0.0`.
+Merging `next` into `main` is a separate act from tagging and waits on
+neither of those: `next` is kept mergeable at all times, which is the
+point of the branch.
 
 # Completed Steps
 

cmd/webhooker/dotenv_test.go

@@ -0,0 +1,107 @@
+package main
+
+import (
+	"bytes"
+	"os"
+	"path/filepath"
+	"strings"
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+	"sneak.berlin/go/webhooker/internal/config"
+)
+
+// dotEnvKey is a throwaway variable name these tests write and read,
+// so they cannot disturb real configuration.
+const dotEnvKey = "WEBHOOKER_TEST_DISPATCH_VALUE"
+
+// writeDotEnvInWorkingDir puts contents in a .env file in a fresh
+// temporary directory and moves the process there.
+//
+// The callers are deliberately not parallel and must stay that way:
+// t.Chdir moves the whole process. Go releases parallel tests only
+// after every sequential test in the package has finished, so nothing
+// else runs while these do.
+func writeDotEnvInWorkingDir(t *testing.T, contents string) {
+	t.Helper()
+
+	dir := t.TempDir()
+	require.NoError(t, os.WriteFile(
+		filepath.Join(dir, config.DotEnvPath),
+		[]byte(contents), 0o600,
+	))
+	t.Chdir(dir)
+}
+
+// TestDispatch_MalformedDotEnvRefuses pins the second half of the
+// defect. godotenv applies nothing at all when a file will not parse,
+// so one mistyped line used to revert every variable in it to its
+// default and start the server anyway, with no log line naming the
+// file. The refusal has to arrive before any subcommand runs, which
+// is why `help` — the one subcommand that touches nothing — is still
+// refused here.
+//
+//nolint:paralleltest // t.Chdir moves the whole process.
+func TestDispatch_MalformedDotEnvRefuses(t *testing.T) {
+	writeDotEnvInWorkingDir(t, "PORT 19615\n")
+
+	var stdout, stderr bytes.Buffer
+
+	code := dispatch(
+		[]string{helpCommand}, strings.NewReader(""), &stdout, &stderr,
+	)
+
+	require.Equal(t, 1, code, "a broken .env must exit non-zero")
+	assert.Contains(
+		t, stderr.String(), config.DotEnvPath,
+		"the refusal must name the file",
+	)
+	assert.Empty(
+		t, stdout.String(),
+		"the subcommand must not have run",
+	)
+}
+
+// TestDispatch_LoadsDotEnvBeforeSubcommands pins the ordering the
+// godotenv/autoload import used to provide for free. It ran in an
+// init(), so .env was in the environment before anything read it —
+// including config.DataDir, which both the DATA_DIR lock and resetpw
+// call outside the fx graph. Loading any later would let a .env that
+// sets DATA_DIR lock one directory while the config opened databases
+// in another.
+func TestDispatch_LoadsDotEnvBeforeSubcommands(t *testing.T) {
+	t.Setenv(dotEnvKey, "placeholder")
+	require.NoError(t, os.Unsetenv(dotEnvKey))
+
+	writeDotEnvInWorkingDir(t, dotEnvKey+"=from-dot-env\n")
+
+	var stdout, stderr bytes.Buffer
+
+	code := dispatch(
+		[]string{helpCommand}, strings.NewReader(""), &stdout, &stderr,
+	)
+
+	require.Equal(t, 0, code)
+	assert.Equal(
+		t, "from-dot-env", os.Getenv(dotEnvKey),
+		"the file must be applied before the subcommand runs",
+	)
+}
+
+// TestDispatch_MissingDotEnvIsFine pins the case most deployments are
+// in: no .env at all, which must stay a normal start.
+//
+//nolint:paralleltest // t.Chdir moves the whole process.
+func TestDispatch_MissingDotEnvIsFine(t *testing.T) {
+	t.Chdir(t.TempDir())
+
+	var stdout, stderr bytes.Buffer
+
+	code := dispatch(
+		[]string{helpCommand}, strings.NewReader(""), &stdout, &stderr,
+	)
+
+	require.Equal(t, 0, code)
+	assert.Empty(t, stderr.String())
+}

cmd/webhooker/main.go

@@ -54,6 +54,11 @@ const stopTimeout = 5 * time.Second
 // caller can tell "called wrong" from "declined".
 const exitUsage = 2
 
+// helpCommand is the subcommand that prints usage. The flag spellings
+// beside it in the switch are aliases; this is the name the usage text
+// documents and the one tests invoke.
+const helpCommand = "help"
+
 // Build-time variables set via -ldflags.
 //
 //nolint:gochecknoglobals // Build-time variables injected by the linker.
@@ -75,11 +80,27 @@ func main() {
 // every existing deployment invoke; that path is unchanged, including
 // where the DATA_DIR lock is taken relative to building the fx graph
 // and how fx propagates a non-zero exit itself.
+//
+// The optional .env file is read here, before any subcommand and so
+// before anything reads the environment — config.DataDir, which both
+// the DATA_DIR lock and resetpw call outside the fx graph, above all.
+// It used to be read from an init() in internal/config, which put it
+// earlier still but threw the error away: a single malformed line
+// applied none of the file and said nothing about it. A file that is
+// not there stays fine, since .env is optional and most deployments
+// do not have one.
 func dispatch(
 	args []string,
 	stdin io.Reader,
 	stdout, stderr io.Writer,
 ) int {
+	err := config.LoadDotEnv()
+	if err != nil {
+		_, _ = fmt.Fprintf(stderr, "%s: %v\n", appname, err)
+
+		return 1
+	}
+
 	if len(args) == 0 {
 		return run(stderr)
 	}
@@ -87,7 +108,7 @@ func dispatch(
 	switch args[0] {
 	case resetpw.Name:
 		return resetpw.Run(args[1:], stdin, stdout, stderr)
-	case "help", "-h", "-help", "--help":
+	case helpCommand, "-h", "-help", "--help":
 		usage(stdout)
 
 		return 0

cmd/webhooker/main_test.go

@@ -121,7 +121,7 @@ func TestDispatch_Help(t *testing.T) {
 	var stdout, stderr bytes.Buffer
 
 	code := dispatch(
-		[]string{"help"}, strings.NewReader(""), &stdout, &stderr,
+		[]string{helpCommand}, strings.NewReader(""), &stdout, &stderr,
 	)
 
 	require.Equal(t, 0, code)

internal/config/config.go

@@ -4,6 +4,7 @@ package config
 import (
 	"errors"
 	"fmt"
+	"io/fs"
 	"log/slog"
 	"net/netip"
 	"os"
@@ -11,13 +12,11 @@ import (
 	"strings"
 	"time"
 
+	"github.com/getsentry/sentry-go"
+	"github.com/joho/godotenv"
 	"go.uber.org/fx"
 	"sneak.berlin/go/webhooker/internal/globals"
 	"sneak.berlin/go/webhooker/internal/logger"
-
-	// Populates the environment from a ./.env file automatically for
-	// development configuration. Kept in one place only (here).
-	_ "github.com/joho/godotenv/autoload"
 )
 
 const (
@@ -84,6 +83,12 @@ const (
 	// IPv6 prefix spends on the ::ffff:0:0/96 wrapper, so a /104
 	// covers the same addresses as an IPv4 /8.
 	mappedV4Offset = 96
+
+	// DotEnvPath is the optional file of KEY=value lines read into the
+	// environment at startup, relative to the process working
+	// directory. Exported so that documentation and tests name the
+	// same path the loader opens.
+	DotEnvPath = ".env"
 )
 
 // ErrInvalidEnvironment is returned when WEBHOOKER_ENVIRONMENT
@@ -107,6 +112,15 @@ var ErrInvalidCIDR = errors.New("invalid CIDR")
 // something that is not an IP address literal.
 var ErrInvalidBindAddress = errors.New("invalid bind address")
 
+// ErrInvalidSentryDSN is returned when SENTRY_DSN is set to something
+// the Sentry SDK cannot parse as a DSN.
+var ErrInvalidSentryDSN = errors.New("invalid Sentry DSN")
+
+// ErrDotEnvUnreadable is returned when the optional .env file exists
+// but cannot be read or parsed. A file that is not there is not an
+// error; a file that is there and broken is.
+var ErrDotEnvUnreadable = errors.New("unreadable .env file")
+
 // ErrIncompleteMetricsAuth is returned when exactly one of
 // METRICS_USERNAME and METRICS_PASSWORD carries a value. Neither
 // fallback is acceptable: serving /metrics on the username alone
@@ -212,12 +226,62 @@ func (c *Config) MetricsAuthEnabled() bool {
 	return c.MetricsUsername != "" && c.MetricsPassword != ""
 }
 
+// SentryEnabled reports whether error reporting is shipped to Sentry.
+// It is the only answer to that question in the codebase: the SDK
+// initialisation, the sentryhttp middleware registration and the
+// startup log's sentryEnabled field all read this one method, so the
+// log cannot report reporting as on while nothing is sending.
+//
+// A non-empty DSN is enough because loadFromEnv already parsed it with
+// the SDK's own parser and refused to build a Config around one the
+// SDK would reject, and because initialising the SDK with a DSN that
+// parsed and failed anyway aborts the process rather than leaving this
+// true and the client absent.
+func (c *Config) SentryEnabled() bool {
+	return c.SentryDSN != ""
+}
+
 // envString returns the value of the named environment variable,
 // or an empty string if not set.
 func envString(key string) string {
 	return os.Getenv(key)
 }
 
+// LoadDotEnv reads DotEnvPath into the environment when that file is
+// present, and reports a file that is present but broken.
+//
+// It has to run before anything reads the environment, so that every
+// reader agrees on what the environment holds — the DATA_DIR lock
+// taken before the fx graph exists as much as loadFromEnv itself. A
+// variable already set in the real environment wins: godotenv never
+// overwrites one.
+//
+// A missing file is not an error. It is a development convenience and
+// most deployments set the environment directly.
+//
+// Any other failure is. godotenv parses the whole file before setting
+// anything, so a single malformed line applies none of it: every
+// variable in the file silently reverts to its default, which defeats
+// the fail-loud guarantee for all of them at once.
+func LoadDotEnv() error {
+	return loadDotEnvFile(DotEnvPath)
+}
+
+// loadDotEnvFile is LoadDotEnv over a named file, so tests can point
+// at a temporary one instead of the process working directory.
+func loadDotEnvFile(path string) error {
+	err := godotenv.Load(path)
+	if err == nil || errors.Is(err, fs.ErrNotExist) {
+		return nil
+	}
+
+	return fmt.Errorf(
+		"%w: %s: %w; nothing in it was applied, so fix the file or "+
+			"remove it",
+		ErrDotEnvUnreadable, path, err,
+	)
+}
+
 // DataDir resolves DATA_DIR, applying DefaultDataDir when it is unset
 // or empty. It is exported so that entry points which must act on the
 // data directory before the fx graph exists — taking the exclusive
@@ -462,6 +526,41 @@ func envBindAddress(key, defaultValue string) (string, error) {
 	return addr.String(), nil
 }
 
+// envSentryDSN returns the value of the named environment variable
+// checked as a Sentry DSN. An unset (or empty, or whitespace-only)
+// value yields "", which means error reporting stays off — the common
+// case, and a normal start.
+//
+// A set value is parsed with sentry.NewDsn, which is the call
+// sentry.Init makes on the DSN it is handed, so what passes here is
+// exactly what the SDK will accept later and the two cannot disagree.
+// Reproducing the check by hand instead would cost this package its
+// dependency on the SDK — already a module dependency, already linked
+// into the binary — in exchange for a second definition of "valid DSN"
+// free to drift from the one that decides.
+//
+// A set value that does not parse is a hard error naming the key, so
+// startup fails loudly. Losing error reporting is the failure this
+// variable exists to prevent, and a typo in a DSN is silent forever:
+// nothing later in the process can notice that reports are going
+// nowhere. The bad value is quoted because it is a URL to a public
+// endpoint carrying a public key, not a secret.
+func envSentryDSN(key string) (string, error) {
+	v := strings.TrimSpace(os.Getenv(key))
+	if v == "" {
+		return "", nil
+	}
+
+	_, err := sentry.NewDsn(v)
+	if err != nil {
+		return "", fmt.Errorf(
+			"%w: %s: %q: %w", ErrInvalidSentryDSN, key, v, err,
+		)
+	}
+
+	return v, nil
+}
+
 // resolveMetricsAuth reads the /metrics basic-auth credentials and
 // rejects a half-set pair, naming both variables either way. The
 // error carries neither value: the password is a secret.
@@ -594,6 +693,11 @@ func loadFromEnv() (*Config, error) {
 		return nil, err
 	}
 
+	sentryDSN, err := envSentryDSN("SENTRY_DSN")
+	if err != nil {
+		return nil, err
+	}
+
 	return &Config{
 		DataDir:                DataDir(),
 		Debug:                  debug,
@@ -603,7 +707,7 @@ func loadFromEnv() (*Config, error) {
 		MetricsPassword:        metricsPassword,
 		Port:                   port,
 		BindAddress:            bindAddress,
-		SentryDSN:              envString("SENTRY_DSN"),
+		SentryDSN:              sentryDSN,
 		RetentionSweepInterval: retentionSweepInterval,
 		SessionIdleTimeout:     sessionIdleTimeout,
 		ReceiverRateLimit:      receiverRateLimit,
@@ -738,7 +842,7 @@ func New(lc fx.Lifecycle, params ConfigParams) (*Config, error) {
 		"receiverRateLimit", s.ReceiverRateLimit,
 		"trustedProxies", len(s.TrustedProxies),
 		"allowedEgressCIDRs", len(s.AllowedEgressCIDRs),
-		"hasSentryDSN", s.SentryDSN != "",
+		"sentryEnabled", s.SentryEnabled(),
 		"hasMetricsAuth", s.MetricsAuthEnabled(),
 	)
 

internal/config/dotenv_test.go

@@ -0,0 +1,158 @@
+package config_test
+
+import (
+	"os"
+	"path/filepath"
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+	"sneak.berlin/go/webhooker/internal/config"
+)
+
+// dotEnvKey is a throwaway variable name the .env tests write and
+// read, so they cannot disturb real configuration.
+const dotEnvKey = "WEBHOOKER_TEST_DOTENV_VALUE"
+
+// malformedDotEnv is a file godotenv cannot parse. The first line is
+// the realistic typo — a space where the `=` belongs — and the rest
+// make sure nothing downstream treats the file as salvageable line by
+// line.
+const malformedDotEnv = "PORT 19615\n" +
+	"this is not = valid ! syntax\n" +
+	"\"unclosed\n"
+
+// unsetDotEnvKey makes dotEnvKey genuinely absent for the duration of
+// the test and restores it afterwards. t.Setenv registers the restore;
+// the Unsetenv that follows is what the test actually needs, because a
+// variable set to the empty string is still present in os.Environ and
+// godotenv would refuse to overwrite it.
+func unsetDotEnvKey(t *testing.T) {
+	t.Helper()
+	t.Setenv(dotEnvKey, "placeholder")
+	require.NoError(t, os.Unsetenv(dotEnvKey))
+}
+
+// writeDotEnv writes contents to a .env file in a fresh temporary
+// directory and returns its path.
+func writeDotEnv(t *testing.T, contents string) string {
+	t.Helper()
+
+	path := filepath.Join(t.TempDir(), config.DotEnvPath)
+	require.NoError(t, os.WriteFile(path, []byte(contents), 0o600))
+
+	return path
+}
+
+// TestLoadDotEnv_MissingFileIsFine pins the case most deployments are
+// in. The file is optional: it is a development convenience, and a
+// deployment that configures the environment directly must start
+// normally rather than be refused for a file it was never meant to
+// have.
+//
+//nolint:paralleltest // unsetDotEnvKey uses t.Setenv.
+func TestLoadDotEnv_MissingFileIsFine(t *testing.T) {
+	unsetDotEnvKey(t)
+
+	absent := filepath.Join(t.TempDir(), config.DotEnvPath)
+	require.NoError(t, config.LoadDotEnvFileForTest(absent))
+
+	_, present := os.LookupEnv(dotEnvKey)
+	assert.False(t, present, "nothing may be set from an absent file")
+}
+
+// TestLoadDotEnv_AppliesValues pins that a well-formed file still
+// reaches the environment, which is the whole reason the file is read
+// at all.
+//
+//nolint:paralleltest // unsetDotEnvKey uses t.Setenv.
+func TestLoadDotEnv_AppliesValues(t *testing.T) {
+	unsetDotEnvKey(t)
+
+	path := writeDotEnv(t, "# a comment\n"+dotEnvKey+"=from-dot-env\n")
+
+	require.NoError(t, config.LoadDotEnvFileForTest(path))
+	assert.Equal(t, "from-dot-env", os.Getenv(dotEnvKey))
+}
+
+// TestLoadDotEnv_RealEnvironmentWins pins that the file cannot
+// override a variable the process was actually started with. A
+// deployment that sets DATA_DIR in its unit file must not have it
+// silently replaced by a stale .env left in the working directory.
+func TestLoadDotEnv_RealEnvironmentWins(t *testing.T) {
+	t.Setenv(dotEnvKey, "from-environment")
+
+	path := writeDotEnv(t, dotEnvKey+"=from-dot-env\n")
+
+	require.NoError(t, config.LoadDotEnvFileForTest(path))
+	assert.Equal(t, "from-environment", os.Getenv(dotEnvKey))
+}
+
+// TestLoadDotEnv_MalformedFileAborts is the defect this fixes. One bad
+// line makes godotenv apply none of the file, so every variable in it
+// reverts to its default; the process used to start that way with no
+// log line naming the file at all.
+//
+//nolint:paralleltest // unsetDotEnvKey uses t.Setenv.
+func TestLoadDotEnv_MalformedFileAborts(t *testing.T) {
+	unsetDotEnvKey(t)
+
+	path := writeDotEnv(
+		t, malformedDotEnv+dotEnvKey+"=from-dot-env\n",
+	)
+
+	err := config.LoadDotEnvFileForTest(path)
+
+	require.Error(t, err)
+	require.ErrorIs(t, err, config.ErrDotEnvUnreadable)
+	assert.Contains(
+		t, err.Error(), config.DotEnvPath,
+		"the failure must name the file it could not read",
+	)
+
+	_, present := os.LookupEnv(dotEnvKey)
+	assert.False(
+		t, present,
+		"a rejected file must apply nothing, not part of itself",
+	)
+}
+
+// TestLoadDotEnv_UnreadableFileAborts pins that only absence is
+// tolerated. A .env that exists but cannot be read is a file the
+// operator meant to be applied, so it fails like a malformed one
+// rather than being treated as though it were not there.
+func TestLoadDotEnv_UnreadableFileAborts(t *testing.T) {
+	t.Parallel()
+
+	// A directory in the file's place: open succeeds and the read
+	// fails, which no umask or root-ness can turn back into success
+	// the way a chmod could.
+	path := filepath.Join(t.TempDir(), config.DotEnvPath)
+	require.NoError(t, os.Mkdir(path, 0o750))
+
+	err := config.LoadDotEnvFileForTest(path)
+
+	require.Error(t, err)
+	require.ErrorIs(t, err, config.ErrDotEnvUnreadable)
+}
+
+// TestLoadDotEnv_ReadsTheWorkingDirectory pins the path LoadDotEnv
+// itself opens, which the tests above bypass. It is relative to the
+// process working directory, as it was under godotenv/autoload and as
+// the README documents.
+//
+//nolint:paralleltest // t.Chdir moves the whole process.
+func TestLoadDotEnv_ReadsTheWorkingDirectory(t *testing.T) {
+	unsetDotEnvKey(t)
+
+	dir := t.TempDir()
+	require.NoError(t, os.WriteFile(
+		filepath.Join(dir, config.DotEnvPath),
+		[]byte(dotEnvKey+"=from-working-directory\n"),
+		0o600,
+	))
+	t.Chdir(dir)
+
+	require.NoError(t, config.LoadDotEnv())
+	assert.Equal(t, "from-working-directory", os.Getenv(dotEnvKey))
+}

internal/config/env_test.go

@@ -518,8 +518,20 @@ type badEnvValueCase struct {
 }
 
 // badEnvValueCases is the config.New table, kept out of the test body
-// so the test itself stays readable.
+// so the test itself stays readable. It is assembled from per-variable
+// groups because one literal covering every variable outgrew the
+// function-length budget.
 func badEnvValueCases() []badEnvValueCase {
+	cases := listenerEnvValueCases()
+	cases = append(cases, flagEnvValueCases()...)
+	cases = append(cases, sentryEnvValueCases()...)
+
+	return cases
+}
+
+// listenerEnvValueCases covers the two variables that describe the
+// HTTP listener.
+func listenerEnvValueCases() []badEnvValueCase {
 	return []badEnvValueCase{
 		{
 			name:  "valid PORT is used",
@@ -542,27 +554,6 @@ func badEnvValueCases() []badEnvValueCase {
 			value:       "70000",
 			expectError: true,
 		},
-		{
-			name:  "valid DEBUG is used",
-			key:   envKeyDebug,
-			value: "true",
-			check: func(t *testing.T, cfg *config.Config) {
-				t.Helper()
-				assert.True(t, cfg.Debug)
-			},
-		},
-		{
-			name:        "unparseable DEBUG aborts startup",
-			key:         envKeyDebug,
-			value:       "ture",
-			expectError: true,
-		},
-		{
-			name:        "unparseable MAINTENANCE_MODE aborts startup",
-			key:         envKeyMaintenanceMode,
-			value:       "sometimes",
-			expectError: true,
-		},
 		{
 			name:  "valid BIND_ADDRESS is used",
 			key:   envKeyBindAddress,
@@ -595,6 +586,69 @@ func badEnvValueCases() []badEnvValueCase {
 	}
 }
 
+// flagEnvValueCases covers the boolean variables.
+func flagEnvValueCases() []badEnvValueCase {
+	return []badEnvValueCase{
+		{
+			name:  "valid DEBUG is used",
+			key:   envKeyDebug,
+			value: "true",
+			check: func(t *testing.T, cfg *config.Config) {
+				t.Helper()
+				assert.True(t, cfg.Debug)
+			},
+		},
+		{
+			name:        "unparseable DEBUG aborts startup",
+			key:         envKeyDebug,
+			value:       "ture",
+			expectError: true,
+		},
+		{
+			name:        "unparseable MAINTENANCE_MODE aborts startup",
+			key:         envKeyMaintenanceMode,
+			value:       "sometimes",
+			expectError: true,
+		},
+	}
+}
+
+// sentryEnvValueCases covers SENTRY_DSN. The three rejected values are
+// the ones measured on the defect: each initialised the SDK with an
+// error and left the process serving with error reporting off.
+func sentryEnvValueCases() []badEnvValueCase {
+	return []badEnvValueCase{
+		{
+			name:  "valid SENTRY_DSN is used",
+			key:   envKeySentryDSN,
+			value: validSentryDSN,
+			check: func(t *testing.T, cfg *config.Config) {
+				t.Helper()
+				assert.Equal(t, validSentryDSN, cfg.SentryDSN)
+				assert.True(t, cfg.SentryEnabled())
+			},
+		},
+		{
+			name:        "unparseable SENTRY_DSN aborts startup",
+			key:         envKeySentryDSN,
+			value:       "not-a-dsn",
+			expectError: true,
+		},
+		{
+			name:        "SENTRY_DSN that is not a URL aborts startup",
+			key:         envKeySentryDSN,
+			value:       "%%%",
+			expectError: true,
+		},
+		{
+			name:        "keyless SENTRY_DSN aborts startup",
+			key:         envKeySentryDSN,
+			value:       "https://example.invalid/1",
+			expectError: true,
+		},
+	}
+}
+
 // TestNewUsesDefaultsWhenUnset proves the fail-loud behaviour did not
 // break the legitimate unset case: absent variables still get their
 // documented defaults.
@@ -603,7 +657,7 @@ func TestNewUsesDefaultsWhenUnset(t *testing.T) {
 
 	for _, key := range []string{
 		envKeyPort, envKeyDebug, envKeyMaintenanceMode,
-		envKeyBindAddress,
+		envKeyBindAddress, envKeySentryDSN,
 	} {
 		require.NoError(t, os.Unsetenv(key))
 	}
@@ -626,4 +680,9 @@ func TestNewUsesDefaultsWhenUnset(t *testing.T) {
 		t, config.DefaultBindAddressForTest, cfg.BindAddress,
 	)
 	assert.Equal(t, bindAddressDefault, cfg.BindAddress)
+
+	// An absent SENTRY_DSN is the common case and must stay a normal
+	// start with error reporting off, not a refusal.
+	assert.Empty(t, cfg.SentryDSN)
+	assert.False(t, cfg.SentryEnabled())
 }

internal/config/export_test.go

@@ -51,6 +51,18 @@ func EnvPortForTest(key string, defaultValue int) (int, error) {
 	return envPort(key, defaultValue)
 }
 
+// EnvSentryDSNForTest exposes envSentryDSN.
+func EnvSentryDSNForTest(key string) (string, error) {
+	return envSentryDSN(key)
+}
+
+// LoadDotEnvFileForTest exposes the loader LoadDotEnv runs, over a
+// caller-named file rather than the process working directory, so
+// each .env state can be covered without moving the test process.
+func LoadDotEnvFileForTest(path string) error {
+	return loadDotEnvFile(path)
+}
+
 // EnvBindAddressForTest exposes envBindAddress.
 func EnvBindAddressForTest(key, defaultValue string) (string, error) {
 	return envBindAddress(key, defaultValue)

internal/config/sentry_test.go

@@ -0,0 +1,141 @@
+package config_test
+
+import (
+	"os"
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+	"sneak.berlin/go/webhooker/internal/config"
+)
+
+// envKeySentryDSN is the variable envSentryDSN reads in production.
+const envKeySentryDSN = "SENTRY_DSN"
+
+// validSentryDSN is a syntactically complete DSN. The host is under
+// .invalid (RFC 2606), so nothing a test builds around it can reach a
+// real Sentry installation.
+const validSentryDSN = "https://abc123@sentry.invalid/42"
+
+// envSentryDSNCase is one row of the envSentryDSN table.
+type envSentryDSNCase struct {
+	name        string
+	set         bool
+	value       string
+	expectError bool
+	expected    string
+}
+
+// envSentryDSNCases is the envSentryDSN table. The three invalid
+// values are the ones measured on the defect: each initialised the SDK
+// with an error and left the process serving with reporting off.
+func envSentryDSNCases() []envSentryDSNCase {
+	return []envSentryDSNCase{
+		{
+			name:     "unset means reporting off",
+			expected: "",
+		},
+		{
+			name:     "empty means reporting off",
+			set:      true,
+			value:    "",
+			expected: "",
+		},
+		{
+			name:     "whitespace means reporting off",
+			set:      true,
+			value:    "   ",
+			expected: "",
+		},
+		{
+			name:     "a valid DSN is kept",
+			set:      true,
+			value:    validSentryDSN,
+			expected: validSentryDSN,
+		},
+		{
+			name:     "surrounding whitespace is trimmed",
+			set:      true,
+			value:    "  " + validSentryDSN + "\t",
+			expected: validSentryDSN,
+		},
+		{
+			name:        "a value that is not a URL is rejected",
+			set:         true,
+			value:       "not-a-dsn",
+			expectError: true,
+		},
+		{
+			name:        "an unparseable URL is rejected",
+			set:         true,
+			value:       "%%%",
+			expectError: true,
+		},
+		{
+			name:        "a DSN without a public key is rejected",
+			set:         true,
+			value:       "https://example.invalid/1",
+			expectError: true,
+		},
+		{
+			name:        "a DSN without a project id is rejected",
+			set:         true,
+			value:       "https://abc123@sentry.invalid/",
+			expectError: true,
+		},
+		{
+			name:        "a non-HTTP scheme is rejected",
+			set:         true,
+			value:       "ftp://abc123@sentry.invalid/42",
+			expectError: true,
+		},
+	}
+}
+
+// TestEnvSentryDSN covers the helper directly. What it pins beyond the
+// value is the failure shape: a set-but-unparseable DSN names the
+// variable and the value, exactly as the other fail-loud helpers do,
+// so an operator reads the fix off the message.
+func TestEnvSentryDSN(t *testing.T) {
+	for _, tt := range envSentryDSNCases() {
+		t.Run(tt.name, func(t *testing.T) {
+			// Cannot use t.Parallel() here because t.Setenv
+			// is incompatible with parallel subtests.
+			if tt.set {
+				t.Setenv(envKeySentryDSN, tt.value)
+			} else {
+				require.NoError(t, os.Unsetenv(envKeySentryDSN))
+			}
+
+			got, err := config.EnvSentryDSNForTest(envKeySentryDSN)
+
+			if tt.expectError {
+				require.Error(t, err)
+				require.ErrorIs(t, err, config.ErrInvalidSentryDSN)
+				assert.Contains(t, err.Error(), envKeySentryDSN)
+				assert.Contains(t, err.Error(), tt.value)
+				assert.Empty(t, got)
+
+				return
+			}
+
+			require.NoError(t, err)
+			assert.Equal(t, tt.expected, got)
+		})
+	}
+}
+
+// TestSentryEnabled_TracksTheDSN pins that the one method answering
+// "is anything being reported" agrees with the DSN in every state. The
+// startup log, the SDK initialisation and the sentryhttp middleware
+// all read it, so a log field cannot report reporting as on while
+// nothing is sending.
+func TestSentryEnabled_TracksTheDSN(t *testing.T) {
+	t.Parallel()
+
+	assert.False(t, (&config.Config{}).SentryEnabled())
+	assert.True(
+		t,
+		(&config.Config{SentryDSN: validSentryDSN}).SentryEnabled(),
+	)
+}

internal/database/sqlite_mode_test.go

@@ -93,11 +93,19 @@ func TestMainDatabaseFilesAreOwnerOnly(t *testing.T) {
 		t, filepath.Join(dataDir, database.MainDBFileName),
 	)
 
-	// The data directory stays group-readable. Deployments may rely on
-	// the group bit; the file mode is the barrier, not the directory.
+	// The data directory grants nothing to `other`. Asserted as a
+	// property rather than as an exact 0750, because MkdirAll applies
+	// the ambient umask: the exact mode is the developer's umask as
+	// much as the application's request, and pinning it would make
+	// `make check` pass or fail on where it is run. The group bits are
+	// deliberately left unasserted — deployments may rely on them.
 	info, err := os.Stat(dataDir)
 	require.NoError(t, err)
-	assert.Equal(t, fs.FileMode(0o750), info.Mode().Perm())
+	assert.Zero(
+		t,
+		info.Mode().Perm()&0o007,
+		"the data directory must not be world-accessible",
+	)
 }
 
 // TestPerWebhookEventDatabaseFilesAreOwnerOnly covers the events-*.db

internal/delivery/engine.go

@@ -4,6 +4,7 @@ package delivery
 
 import (
 	"context"
+	"errors"
 	"fmt"
 	"log/slog"
 	"net/http"
@@ -439,7 +440,7 @@ func (e *Engine) processNewTask(
 
 	event := buildEventFromTask(task)
 
-	event, err = e.resolveEventBody(
+	event, err = e.hydrateEvent(
 		webhookDB, event, task,
 	)
 	if err != nil {
@@ -505,9 +506,13 @@ func (e *Engine) processRetryTask(
 		return
 	}
 
+	if e.abandonRetryForMissingTarget(webhookDB, d, task) {
+		return
+	}
+
 	event := buildEventFromTask(task)
 
-	event, err = e.resolveEventBody(
+	event, err = e.hydrateEvent(
 		webhookDB, event, task,
 	)
 	if err != nil {
@@ -529,6 +534,64 @@ func (e *Engine) processRetryTask(
 	e.processDelivery(ctx, webhookDB, d, task)
 }
 
+// abandonRetryForMissingTarget stops a retry chain whose target has
+// been deleted, and reports whether it did.
+//
+// A scheduled retry lives in memory as a time.AfterFunc holding the
+// target's configuration as it was when the chain began, and nothing
+// else on this path reads the target row. Without this check a
+// deletion stops nothing: the timer keeps firing and keeps sending to
+// the destination the operator removed, for the whole remaining
+// backoff chain. Terminalising in the recovery and sweep paths alone
+// is not enough, because those only see the delivery once nothing
+// holds it in memory — which is to say after a restart.
+//
+// The worker already owns this delivery, so the terminal write happens
+// here directly, exactly as a target's own Deliver fails one. Claiming
+// it again through the recovery gate would only fail against the
+// reference the worker itself is holding.
+//
+// A lookup that fails for any other reason is not a deletion — it is
+// the main database being unreadable — and the delivery goes ahead as
+// it did before. A guard that terminally failed deliveries on a
+// transient fault would be worse than the bug it fixes.
+func (e *Engine) abandonRetryForMissingTarget(
+	webhookDB *gorm.DB,
+	d *database.Delivery,
+	task *Task,
+) bool {
+	_, err := e.loadTarget(task.TargetID)
+	if err == nil {
+		return false
+	}
+
+	if !errors.Is(err, gorm.ErrRecordNotFound) {
+		e.log.Warn(
+			"could not confirm the target of a retrying "+
+				"delivery still exists; attempting anyway",
+			"delivery_id", task.DeliveryID,
+			"target_id", task.TargetID,
+			"error", err,
+		)
+
+		return false
+	}
+
+	targetType, reason := e.missingTargetReason(task.TargetID)
+
+	e.log.Warn(
+		"abandoning scheduled retry: target is gone",
+		"webhook_id", task.WebhookID,
+		"delivery_id", task.DeliveryID,
+		"target_id", task.TargetID,
+		"target_type", targetType,
+	)
+
+	e.failDelivery(webhookDB, d, targetType, reason)
+
+	return true
+}
+
 func (e *Engine) recoverInFlight(ctx context.Context) {
 	var webhookIDs []string
 
@@ -633,6 +696,20 @@ func (e *Engine) recoverSingleRetry(
 ) {
 	target, err := e.loadTarget(d.TargetID)
 	if err != nil {
+		// A target that is merely gone is an operator action with a
+		// terminal answer. Any other failure is the main database
+		// refusing to read, which is transient and must leave the
+		// delivery alone: failing every retrying delivery of every
+		// webhook on one bad read would be a far larger fault than
+		// the strand it is meant to clear.
+		if errors.Is(err, gorm.ErrRecordNotFound) {
+			e.failMissingTargetRetry(
+				webhookDB, webhookID, d,
+			)
+
+			return
+		}
+
 		e.log.Error(
 			"failed to load target for retrying "+
 				"delivery recovery",
@@ -1028,6 +1105,16 @@ func (e *Engine) sweepSingleRetry(
 ) {
 	target, err := e.loadTarget(d.TargetID)
 	if err != nil {
+		// Deleted is terminal, unreadable is not; see
+		// recoverSingleRetry.
+		if errors.Is(err, gorm.ErrRecordNotFound) {
+			e.failMissingTargetRetry(
+				webhookDB, webhookID, d,
+			)
+
+			return
+		}
+
 		e.log.Error(
 			"retry sweep: failed to load target",
 			"delivery_id", d.ID,
@@ -1134,6 +1221,113 @@ func (e *Engine) failUnretryableRetry(
 		target.Type,
 	)
 
+	e.failDelivery(webhookDB, d, target.Type, reason)
+}
+
+// failMissingTargetRetry terminally fails an orphaned retrying
+// delivery whose target row is gone. Both restart recovery and the
+// periodic sweep call it, so the transition exists once.
+//
+// Until it existed both paths logged the failed lookup and returned,
+// which left the delivery retrying for the life of the database and
+// the sweep repeating the same error every minute forever. Failing it
+// with a recorded reason is the treatment the other orphaned-retry
+// cases already get, so all of them read alike in the event log.
+//
+// Logged at warn rather than error: a deleted target is an operator
+// action, not a system fault.
+func (e *Engine) failMissingTargetRetry(
+	webhookDB *gorm.DB,
+	webhookID string,
+	d *database.Delivery,
+) {
+	// Terminal, and reached from the recovery paths, so it takes
+	// ownership like every other write they make.
+	if !e.inflight.retainIdle(d.ID) {
+		return
+	}
+
+	defer e.inflight.release(d.ID)
+
+	targetType, reason := e.missingTargetReason(d.TargetID)
+
+	e.log.Warn(
+		"failing orphaned retrying delivery: "+
+			"its target no longer exists",
+		"webhook_id", webhookID,
+		"delivery_id", d.ID,
+		"target_id", d.TargetID,
+		"target_type", targetType,
+	)
+
+	e.failDelivery(webhookDB, d, targetType, reason)
+}
+
+// missingTargetReason describes a target id that no longer resolves,
+// and returns the type of the deleted row where there still is one.
+//
+// The lookup is Unscoped because deletes are soft: the row survives
+// with deleted_at set, invisible to loadTarget's default scope.
+// Reading it is what separates "you deleted this target" from "this id
+// never named a row" — different things to whoever reads the event
+// log, and only the first is something an operator did. The widened
+// scope is deliberately confined to this terminal path: the engine's
+// normal target loading must go on refusing a deleted target, or
+// deleting one would stop nothing.
+//
+// The type comes back so the caller can label the delivery's status
+// transition with it. Where the row is gone entirely there is no type
+// to give, and updateDeliveryStatus leaves the counter alone rather
+// than opening a series named by the empty string.
+func (e *Engine) missingTargetReason(
+	targetID string,
+) (database.TargetType, string) {
+	var target database.Target
+
+	err := e.database.DB().Unscoped().
+		First(&target, "id = ?", targetID).Error
+	if err != nil {
+		return "", fmt.Sprintf(
+			"target %s no longer exists; the delivery "+
+				"cannot be retried and has been failed "+
+				"terminally",
+			targetID,
+		)
+	}
+
+	return target.Type, fmt.Sprintf(
+		"target %q (type %s) was deleted; the delivery "+
+			"cannot be retried and has been failed terminally",
+		target.Name, target.Type,
+	)
+}
+
+// failDelivery records why a delivery is over and then marks it
+// failed. The caller must already own the delivery: every call site is
+// either a worker holding the reference runTask took, or a recovery
+// path that took one through retainIdle.
+//
+// The result row is written first and a failure to write it stops the
+// transition, which is what keeps a delivery from ending failed with
+// an empty event log — the state that leaves an operator with nothing
+// but a server log line to work out what happened. A delivery whose
+// reason could not be recorded stays in the non-terminal state it
+// already holds, where the sweep will find it again; see
+// bookkeepingFailed.
+//
+// The target type is a parameter rather than read off d because the
+// orphaned-retry callers deliberately hold a delivery loaded without
+// its Target relation: populating d.Target would make GORM's
+// SaveBeforeAssociations upsert the whole target row — plaintext
+// config, which for a slack target is the credential — into the
+// per-webhook event database. See
+// https://git.eeqj.de/sneak/webhooker/issues/206.
+func (e *Engine) failDelivery(
+	webhookDB *gorm.DB,
+	d *database.Delivery,
+	targetType database.TargetType,
+	reason string,
+) {
 	err := e.recordResult(
 		webhookDB,
 		d,
@@ -1150,14 +1344,8 @@ func (e *Engine) failUnretryableRetry(
 		return
 	}
 
-	// The type is passed rather than assigned onto d: the delivery
-	// is loaded here without its target relation, and populating
-	// d.Target would make GORM's SaveBeforeAssociations upsert the
-	// whole target row — plaintext config, which for a slack target
-	// is the credential — into the per-webhook event database. See
-	// https://git.eeqj.de/sneak/webhooker/issues/206.
 	e.settleStatus(
-		webhookDB, d, target.Type,
+		webhookDB, d, targetType,
 		database.DeliveryStatusFailed,
 	)
 }
@@ -1178,9 +1366,19 @@ func (e *Engine) processDelivery(
 			"type", d.Target.Type,
 		)
 
-		e.settleStatus(
+		// The reason is recorded, not just logged. This branch used
+		// to fail the delivery with no DeliveryResult at all, which
+		// showed in the event log as "failed, no attempts recorded
+		// yet" and left one server log line as the only account of
+		// why anywhere.
+		e.failDelivery(
 			webhookDB, d, d.Target.Type,
-			database.DeliveryStatusFailed,
+			fmt.Sprintf(
+				"unknown target type %q: this build has no "+
+					"delivery implementation for it, so no "+
+					"attempt was made",
+				d.Target.Type,
+			),
 		)
 
 		return
@@ -1349,6 +1547,11 @@ func truncate(s string, maxLen int) string {
 
 // --- Helper functions ---
 
+// buildEventFromTask reconstructs the event a Task describes, as far
+// as the Task itself goes. The fields it cannot fill — the body when
+// it was too large to inline, and the receipt time, which no Task
+// carries — come from the stored row in hydrateEvent, which every
+// caller of this function runs next.
 func buildEventFromTask(task *Task) database.Event {
 	event := database.Event{
 		EntrypointID: task.EntrypointID,
@@ -1376,29 +1579,67 @@ func buildTargetFromTask(task *Task) database.Target {
 	return target
 }
 
-func (e *Engine) resolveEventBody(
+// hydrateEvent fills in the event fields a Task does not carry, by
+// reading the stored event row.
+//
+// CreatedAt is the event's receipt time and lives only in that row.
+// The Slack target renders it into every message it sends, so an
+// unhydrated event puts the zero time in front of a human on every
+// notification the product delivers. See
+// https://git.eeqj.de/sneak/webhooker/issues/257.
+//
+// The body comes from the same row when the Task did not inline it,
+// which is the case for a body at or above MaxInlineBodySize.
+//
+// A read failure is fatal to the delivery only when the body depended
+// on it. When the Task inlined the body, the delivery has everything
+// it needs to be sent and goes ahead with the timestamp unset: the row
+// can be gone under a retention reap while a queued delivery still
+// holds its body, and dropping a deliverable event to protect one
+// metadata field would be a worse failure than the one it prevents.
+func (e *Engine) hydrateEvent(
 	webhookDB *gorm.DB,
 	event database.Event,
 	task *Task,
 ) (database.Event, error) {
-	if task.Body != nil {
+	columns := []string{"created_at"}
+
+	if task.Body == nil {
+		columns = append(columns, "body")
+	}
+
+	var dbEvent database.Event
+
+	err := webhookDB.Select(columns).
+		First(&dbEvent, "id = ?", task.EventID).Error
+	if err != nil {
+		if task.Body == nil {
+			return event, fmt.Errorf(
+				"fetching event body: %w", err,
+			)
+		}
+
+		e.log.Warn(
+			"could not read the stored event; delivering "+
+				"the inlined body without its receipt time",
+			"event_id", task.EventID,
+			"delivery_id", task.DeliveryID,
+			"error", err,
+		)
+
 		event.Body = *task.Body
 
 		return event, nil
 	}
 
-	var dbEvent database.Event
+	event.CreatedAt = dbEvent.CreatedAt
 
-	err := webhookDB.Select("body").
-		First(&dbEvent, "id = ?", task.EventID).Error
-	if err != nil {
-		return event, fmt.Errorf(
-			"fetching event body: %w", err,
-		)
+	if task.Body != nil {
+		event.Body = *task.Body
+	} else {
+		event.Body = dbEvent.Body
 	}
 
-	event.Body = dbEvent.Body
-
 	return event, nil
 }
 

internal/delivery/engine_integration_test.go

@@ -377,6 +377,17 @@ func TestProcessRetryTask_SuccessfulRetry(t *testing.T) {
 
 	bodyStr := event.Body
 	cfg := iHTTPConfig(ts.URL)
+
+	// The target row exists because the engine confirms a scheduled
+	// retry's target has not been deleted before it runs it. A retry
+	// task whose target id names no row at all is a state the service
+	// does not produce: the handler read that target to build the
+	// task. See https://git.eeqj.de/sneak/webhooker/issues/107.
+	iCreateTarget(
+		t, s.MainDB, targetID, s.WebhookID, "retry-target",
+		database.TargetTypeHTTP, cfg, 5,
+	)
+
 	task := iTask(
 		d, event, s.WebhookID, targetID,
 		"retry-target", cfg, 5, 2, &bodyStr,
@@ -456,6 +467,12 @@ func TestProcessRetryTask_LargeBody_FetchFromDB(
 	)
 
 	cfg := iHTTPConfig(ts.URL)
+
+	iCreateTarget(
+		t, s.MainDB, targetID, s.WebhookID, "retry-large",
+		database.TargetTypeHTTP, cfg, 5,
+	)
+
 	task := iTask(
 		d, event, s.WebhookID, targetID,
 		"retry-large", cfg, 5, 2, nil,
@@ -558,6 +575,12 @@ func TestWorkerLifecycle_ProcessesRetryChannel(
 
 	bodyStr := event.Body
 	cfg := iHTTPConfig(ts.URL)
+
+	iCreateTarget(
+		t, s.MainDB, targetID, s.WebhookID, "retry-chan-test",
+		database.TargetTypeHTTP, cfg, 5,
+	)
+
 	task := iTask(
 		d, event, s.WebhookID, targetID,
 		"retry-chan-test", cfg, 5, 2, &bodyStr,

internal/delivery/event_db_isolation_test.go

@@ -96,7 +96,15 @@ func TestEventDBHoldsNoTargetRows(t *testing.T) {
 	)
 	assertNoTargetRows(t, dbPath)
 
-	// A retry.
+	// A retry. Its target exists in the main database, because the
+	// engine confirms a scheduled retry's target has not been
+	// deleted before running it; see
+	// https://git.eeqj.de/sneak/webhooker/issues/107.
+	iCreateTarget(
+		t, s.MainDB, targetID, s.WebhookID, "leaky-target",
+		database.TargetTypeHTTP, cfg, 5,
+	)
+
 	rd := iSeedDelivery(
 		t, s.WebhookDB, event.ID, targetID,
 		database.DeliveryStatusRetrying,

internal/delivery/event_timestamp_test.go

@@ -0,0 +1,442 @@
+package delivery_test
+
+import (
+	"context"
+	"encoding/json"
+	"io"
+	"net/http"
+	"net/http/httptest"
+	"testing"
+	"time"
+
+	"github.com/google/uuid"
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+	"gorm.io/gorm"
+	"sneak.berlin/go/webhooker/internal/database"
+	"sneak.berlin/go/webhooker/internal/delivery"
+)
+
+// tsEventCreatedAt is the receipt time seeded on the events these
+// tests deliver. It is far enough from both the zero time and from
+// now that neither can be mistaken for it.
+func tsEventCreatedAt() time.Time {
+	return time.Date(
+		2026, time.March, 4, 5, 6, 7, 0, time.UTC,
+	)
+}
+
+// tsZeroStamp is what a Slack message renders when the event handed
+// to FormatSlackMessage carries no CreatedAt.
+const tsZeroStamp = "*Timestamp:* `0001-01-01T00:00:00Z`"
+
+// tsEventBody is the body seeded on every event in this file. It is
+// small enough that a Task can inline it.
+const tsEventBody = `{"hello":"world"}`
+
+// tsUndeliverableHook stands in for a Slack incoming webhook on the
+// tests that never send: the config parser requires a URL, but no
+// request is made.
+const tsUndeliverableHook = "https://hooks.slack.com/services/T/B/x"
+
+// tsSink is a stand-in Slack incoming webhook that records the raw
+// body posted to it.
+type tsSink struct {
+	*httptest.Server
+
+	bodies chan []byte
+}
+
+func newTSSink(t *testing.T) *tsSink {
+	t.Helper()
+
+	s := &tsSink{bodies: make(chan []byte, 8)}
+
+	s.Server = httptest.NewServer(http.HandlerFunc(
+		func(w http.ResponseWriter, r *http.Request) {
+			body, _ := io.ReadAll(r.Body)
+
+			select {
+			case s.bodies <- body:
+			default:
+			}
+
+			w.WriteHeader(http.StatusOK)
+		},
+	))
+
+	t.Cleanup(s.Close)
+
+	return s
+}
+
+// text returns the Slack message text from the single payload the
+// sink received.
+func (s *tsSink) text(t *testing.T) string {
+	t.Helper()
+
+	select {
+	case raw := <-s.bodies:
+		t.Logf("raw slack payload: %s", raw)
+
+		var payload struct {
+			Text string `json:"text"`
+		}
+
+		require.NoError(t, json.Unmarshal(raw, &payload))
+
+		return payload.Text
+	case <-time.After(5 * time.Second):
+		t.Fatal("slack sink received no payload")
+
+		return ""
+	}
+}
+
+func tsSlackConfig(t *testing.T, url string) string {
+	t.Helper()
+
+	data, err := json.Marshal(
+		delivery.SlackTargetConfig{WebhookURL: url},
+	)
+	require.NoError(t, err)
+
+	return string(data)
+}
+
+// tsSeedEvent writes an event whose CreatedAt is tsEventCreatedAt
+// rather than the write time, so an assertion on the rendered
+// timestamp cannot pass by accident against "roughly now".
+func tsSeedEvent(
+	t *testing.T, db *gorm.DB, webhookID string,
+) database.Event {
+	t.Helper()
+
+	event := database.Event{
+		WebhookID:    webhookID,
+		EntrypointID: uuid.New().String(),
+		Method:       http.MethodPost,
+		Headers:      `{}`,
+		Body:         tsEventBody,
+		ContentType:  "application/json",
+	}
+	event.ID = uuid.New().String()
+	event.CreatedAt = tsEventCreatedAt()
+	event.UpdatedAt = tsEventCreatedAt()
+
+	require.NoError(t, db.Create(&event).Error)
+
+	var stored database.Event
+
+	require.NoError(t,
+		db.First(&stored, "id = ?", event.ID).Error,
+	)
+	require.Equal(t,
+		tsEventCreatedAt().UTC(), stored.CreatedAt.UTC(),
+		"seeded created_at did not round-trip",
+	)
+
+	return event
+}
+
+// tsSeedTarget writes the slack target row into the main database.
+// The retry path confirms the target still exists before sending.
+func tsSeedTarget(
+	t *testing.T, mainDB *gorm.DB, webhookID, config string,
+) database.Target {
+	t.Helper()
+
+	target := database.Target{
+		WebhookID: webhookID,
+		Name:      "slack-sink",
+		Type:      database.TargetTypeSlack,
+		Config:    config,
+		Active:    true,
+	}
+
+	require.NoError(t, mainDB.Create(&target).Error)
+
+	return target
+}
+
+func tsTask(
+	d database.Delivery,
+	event database.Event,
+	webhookID string,
+	target database.Target,
+	attemptNum int,
+	body *string,
+) delivery.Task {
+	return delivery.Task{
+		DeliveryID:   d.ID,
+		EventID:      event.ID,
+		WebhookID:    webhookID,
+		EntrypointID: event.EntrypointID,
+		TargetID:     target.ID,
+		TargetName:   target.Name,
+		TargetType:   database.TargetTypeSlack,
+		TargetConfig: target.Config,
+		MaxRetries:   0,
+		Method:       event.Method,
+		Headers:      event.Headers,
+		ContentType:  event.ContentType,
+		Body:         body,
+		AttemptNum:   attemptNum,
+	}
+}
+
+func tsAssertRealTimestamp(t *testing.T, text string) {
+	t.Helper()
+
+	assert.NotContains(t, text, tsZeroStamp,
+		"slack message carries the zero timestamp",
+	)
+	assert.Contains(t, text,
+		"*Timestamp:* `"+
+			tsEventCreatedAt().UTC().Format(time.RFC3339)+"`",
+		"slack message does not carry the event's receipt time",
+	)
+}
+
+// tsCase is one end-to-end delivery of a seeded event to a slack
+// sink, over whichever engine path `process` names.
+type tsCase struct {
+	// status is the delivery row's status before the engine runs.
+	// The retry path refuses a delivery that is not retrying.
+	status database.DeliveryStatus
+
+	// inlineBody mirrors a Task built for a body under
+	// MaxInlineBodySize. When false the engine reads the body back
+	// from the stored row.
+	inlineBody bool
+
+	attemptNum int
+
+	process func(
+		ctx context.Context, e *delivery.Engine, task *delivery.Task,
+	)
+}
+
+// run delivers one event through the named path and returns the
+// Slack message text the sink received.
+func (c tsCase) run(t *testing.T) (iSetup, database.Delivery, string) {
+	t.Helper()
+
+	s := newISetup(t)
+	sink := newTSSink(t)
+
+	cfg := tsSlackConfig(t, sink.URL)
+	target := tsSeedTarget(t, s.MainDB, s.WebhookID, cfg)
+	event := tsSeedEvent(t, s.WebhookDB, s.WebhookID)
+
+	d := iSeedDelivery(
+		t, s.WebhookDB, event.ID, target.ID, c.status,
+	)
+
+	var body *string
+
+	if c.inlineBody {
+		bodyStr := event.Body
+		body = &bodyStr
+	}
+
+	task := tsTask(
+		d, event, s.WebhookID, target, c.attemptNum, body,
+	)
+
+	c.process(context.TODO(), s.Engine, &task)
+
+	return s, d, sink.text(t)
+}
+
+// TestSlackFirstAttemptCarriesEventTimestamp covers the path an
+// event takes on its first delivery: the task comes from the
+// receiver and the engine reconstructs the event from it.
+func TestSlackFirstAttemptCarriesEventTimestamp(t *testing.T) {
+	t.Parallel()
+
+	s, d, text := tsCase{
+		status:     database.DeliveryStatusPending,
+		inlineBody: true,
+		attemptNum: 1,
+		process: func(
+			ctx context.Context,
+			e *delivery.Engine,
+			task *delivery.Task,
+		) {
+			e.ExportProcessNewTask(ctx, task)
+		},
+	}.run(t)
+
+	tsAssertRealTimestamp(t, text)
+
+	iAssertStatus(t, s.WebhookDB, d.ID,
+		database.DeliveryStatusDelivered,
+	)
+}
+
+// TestSlackFirstAttemptLargeBodyCarriesEventTimestamp covers the
+// first-attempt path for an event whose body exceeded
+// MaxInlineBodySize, so the task carries no body and the engine
+// reads it back from the stored row.
+func TestSlackFirstAttemptLargeBodyCarriesEventTimestamp(
+	t *testing.T,
+) {
+	t.Parallel()
+
+	_, _, text := tsCase{
+		status:     database.DeliveryStatusPending,
+		inlineBody: false,
+		attemptNum: 1,
+		process: func(
+			ctx context.Context,
+			e *delivery.Engine,
+			task *delivery.Task,
+		) {
+			e.ExportProcessNewTask(ctx, task)
+		},
+	}.run(t)
+
+	tsAssertRealTimestamp(t, text)
+}
+
+// TestSlackRetryCarriesEventTimestamp covers the retry path, which
+// reconstructs the event from the same task the first attempt used.
+func TestSlackRetryCarriesEventTimestamp(t *testing.T) {
+	t.Parallel()
+
+	s, d, text := tsCase{
+		status:     database.DeliveryStatusRetrying,
+		inlineBody: true,
+		attemptNum: 2,
+		process: func(
+			ctx context.Context,
+			e *delivery.Engine,
+			task *delivery.Task,
+		) {
+			e.ExportProcessRetryTask(ctx, task)
+		},
+	}.run(t)
+
+	tsAssertRealTimestamp(t, text)
+
+	iAssertStatus(t, s.WebhookDB, d.ID,
+		database.DeliveryStatusDelivered,
+	)
+}
+
+// TestFormatSlackMessageOverTaskReconstructedEvent asserts on the
+// formatted message directly, over the event the delivery paths
+// reconstruct from a Task. It is the unit-level guard under the
+// end-to-end tests: revert the CreatedAt population in hydrateEvent
+// and this fails on the zero timestamp.
+func TestFormatSlackMessageOverTaskReconstructedEvent(
+	t *testing.T,
+) {
+	t.Parallel()
+
+	s := newISetup(t)
+
+	cfg := tsSlackConfig(t, tsUndeliverableHook)
+	target := tsSeedTarget(t, s.MainDB, s.WebhookID, cfg)
+	event := tsSeedEvent(t, s.WebhookDB, s.WebhookID)
+
+	d := iSeedDelivery(
+		t, s.WebhookDB, event.ID, target.ID,
+		database.DeliveryStatusPending,
+	)
+
+	bodyStr := event.Body
+	task := tsTask(d, event, s.WebhookID, target, 1, &bodyStr)
+
+	rebuilt, err := s.Engine.ExportEventForTask(
+		s.WebhookDB, &task,
+	)
+	require.NoError(t, err)
+	assert.False(t, rebuilt.CreatedAt.IsZero(),
+		"reconstructed event carries the zero time",
+	)
+	assert.Equal(t,
+		tsEventCreatedAt().UTC(), rebuilt.CreatedAt.UTC(),
+	)
+
+	tsAssertRealTimestamp(
+		t, delivery.FormatSlackMessage(&rebuilt),
+	)
+}
+
+// TestFormatSlackMessageZeroTimestamp asserts the rendering choice
+// directly, without going through the engine: a zero CreatedAt (the
+// shape a reaped-row fallback produces) renders as "unknown" rather
+// than the year-1 zero time, while a real CreatedAt still renders as
+// RFC3339.
+func TestFormatSlackMessageZeroTimestamp(t *testing.T) {
+	t.Parallel()
+
+	zeroEvent := database.Event{
+		Method:      http.MethodPost,
+		ContentType: testContentType,
+		Body:        tsEventBody,
+	}
+
+	zeroText := delivery.FormatSlackMessage(&zeroEvent)
+
+	assert.NotContains(t, zeroText, "0001-01-01",
+		"slack message carries the zero-time year",
+	)
+	assert.Contains(t, zeroText, "*Timestamp:* `unknown`",
+		"slack message does not mark an unset receipt time as unknown",
+	)
+
+	nonZeroEvent := zeroEvent
+	nonZeroEvent.CreatedAt = tsEventCreatedAt()
+
+	nonZeroText := delivery.FormatSlackMessage(&nonZeroEvent)
+
+	assert.Contains(t, nonZeroText,
+		"*Timestamp:* `"+
+			tsEventCreatedAt().UTC().Format(time.RFC3339)+"`",
+		"slack message does not render a real receipt time as RFC3339",
+	)
+}
+
+// TestEventReconstructionSurvivesAReapedRow pins the fallback: an
+// event row reaped by retention while its delivery still holds the
+// body inline is still delivered, with the receipt time unset,
+// rather than dropped.
+func TestEventReconstructionSurvivesAReapedRow(t *testing.T) {
+	t.Parallel()
+
+	s := newISetup(t)
+
+	cfg := tsSlackConfig(t, tsUndeliverableHook)
+	target := tsSeedTarget(t, s.MainDB, s.WebhookID, cfg)
+	event := tsSeedEvent(t, s.WebhookDB, s.WebhookID)
+
+	d := iSeedDelivery(
+		t, s.WebhookDB, event.ID, target.ID,
+		database.DeliveryStatusPending,
+	)
+
+	bodyStr := event.Body
+	task := tsTask(d, event, s.WebhookID, target, 1, &bodyStr)
+
+	require.NoError(t, s.WebhookDB.Unscoped().Delete(
+		&database.Event{}, "id = ?", event.ID,
+	).Error)
+
+	rebuilt, err := s.Engine.ExportEventForTask(
+		s.WebhookDB, &task,
+	)
+	require.NoError(t, err)
+	assert.Equal(t, bodyStr, rebuilt.Body)
+	assert.True(t, rebuilt.CreatedAt.IsZero())
+
+	// A task with no inlined body has nothing left to deliver, so
+	// the same reaped row is an error there.
+	noBody := task
+	noBody.Body = nil
+
+	_, err = s.Engine.ExportEventForTask(s.WebhookDB, &noBody)
+	require.Error(t, err)
+}

internal/delivery/export_test.go

@@ -151,6 +151,16 @@ func (e *Engine) ExportProcessRetryTask(
 	e.processRetryTask(ctx, task)
 }
 
+// ExportEventForTask exposes the event reconstruction the delivery
+// paths run: buildEventFromTask followed by hydrateEvent.
+func (e *Engine) ExportEventForTask(
+	webhookDB *gorm.DB, task *Task,
+) (database.Event, error) {
+	return e.hydrateEvent(
+		webhookDB, buildEventFromTask(task), task,
+	)
+}
+
 // ExportProcessDelivery exposes processDelivery.
 func (e *Engine) ExportProcessDelivery(
 	ctx context.Context,

internal/delivery/metrics_test.go

@@ -229,6 +229,13 @@ func mExhaustRetries(t *testing.T, s iSetup) {
 	body := event.Body
 	cfg := iHTTPConfig(ts.URL)
 
+	// The retry below is only run if its target still exists; see
+	// https://git.eeqj.de/sneak/webhooker/issues/107.
+	iCreateTarget(
+		t, s.MainDB, targetID, s.WebhookID, "metrics-fail",
+		database.TargetTypeHTTP, cfg, 2,
+	)
+
 	first := iTask(
 		d, event, s.WebhookID, targetID,
 		"metrics-fail", cfg, 2, 1, &body,
@@ -289,6 +296,13 @@ func TestDeliveryMetrics_CircuitBreakerGauge(t *testing.T) {
 	// rather than the budget is what stops the delivery.
 	maxRetries := delivery.ExportDefaultFailureThreshold + 5
 
+	// The retries below are only run if their target still exists;
+	// see https://git.eeqj.de/sneak/webhooker/issues/107.
+	iCreateTarget(
+		t, s.MainDB, targetID, s.WebhookID, "metrics-trip",
+		database.TargetTypeHTTP, cfg, maxRetries,
+	)
+
 	first := iTask(
 		d, event, s.WebhookID, targetID,
 		"metrics-trip", cfg, maxRetries, 1, &body,
@@ -353,6 +367,11 @@ func TestDeliveryMetrics_BreakerBlockedIsNotAnAttempt(
 	cfg := iHTTPConfig(ts.URL)
 	maxRetries := delivery.ExportDefaultFailureThreshold + 5
 
+	iCreateTarget(
+		t, s.MainDB, targetID, s.WebhookID, "metrics-blocked",
+		database.TargetTypeHTTP, cfg, maxRetries,
+	)
+
 	first := iTask(
 		d, event, s.WebhookID, targetID,
 		"metrics-blocked", cfg, maxRetries, 1, &body,

internal/delivery/target_slack.go

@@ -231,10 +231,15 @@ func FormatSlackMessage(
 		event.ContentType,
 	)
 
+	timestamp := "unknown"
+	if !event.CreatedAt.IsZero() {
+		timestamp = event.CreatedAt.UTC().Format(time.RFC3339)
+	}
+
 	fmt.Fprintf(
 		&b,
 		"*Timestamp:* `%s`\n",
-		event.CreatedAt.UTC().Format(time.RFC3339),
+		timestamp,
 	)
 
 	fmt.Fprintf(

internal/delivery/terminal_state_test.go

@@ -0,0 +1,531 @@
+package delivery_test
+
+import (
+	"context"
+	"net/http"
+	"net/http/httptest"
+	"sync/atomic"
+	"testing"
+
+	"github.com/google/uuid"
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+	"sneak.berlin/go/webhooker/internal/database"
+	"sneak.berlin/go/webhooker/internal/delivery"
+)
+
+// The two terminal-state gaps of
+// https://git.eeqj.de/sneak/webhooker/issues/107: a delivery failed
+// with nothing in its event log to say why, and a retrying delivery
+// whose target was deleted, which used to keep sending and then never
+// terminalise.
+
+// tUnknownType is a target type no build implements. It stands in for
+// a target whose type was written by a build that knew a type this one
+// does not.
+const tUnknownType = database.TargetType("pubsub")
+
+// tSeedDeletedTarget creates a target, a retrying delivery against it
+// with one recorded failed attempt, and then deletes the target the
+// way the source page does.
+//
+// It asserts the delete is soft, because that is the whole reason the
+// engine could not tell a deleted target from a target id that never
+// named a row: the surviving row is invisible to a scoped read.
+func tSeedDeletedTarget(
+	t *testing.T,
+	s iSetup,
+	name, url string,
+) string {
+	t.Helper()
+
+	targetID := uuid.New().String()
+
+	iCreateTarget(
+		t, s.MainDB, targetID, s.WebhookID, name,
+		database.TargetTypeHTTP, iHTTPConfig(url), 5,
+	)
+
+	event := iSeedEvent(
+		t, s.WebhookDB, s.WebhookID, `{"target":"deleted"}`,
+	)
+
+	d := iSeedDelivery(
+		t, s.WebhookDB, event.ID, targetID,
+		database.DeliveryStatusRetrying,
+	)
+
+	iSeedFailedResult(t, s.WebhookDB, d.ID)
+
+	require.NoError(t, s.MainDB.Delete(
+		&database.Target{}, "id = ?", targetID,
+	).Error)
+
+	var scoped, unscoped int64
+
+	require.NoError(t, s.MainDB.
+		Model(&database.Target{}).
+		Where("id = ?", targetID).
+		Count(&scoped).Error)
+
+	require.NoError(t, s.MainDB.Unscoped().
+		Model(&database.Target{}).
+		Where("id = ?", targetID).
+		Count(&unscoped).Error)
+
+	require.Zero(t, scoped,
+		"the deleted target is still visible to a scoped read",
+	)
+	require.Equal(t, int64(1), unscoped,
+		"the delete was hard, so this test proves nothing about "+
+			"the soft-delete case it exists for",
+	)
+
+	return d.ID
+}
+
+// tLastResult returns a delivery's final recorded attempt, asserting
+// the expected number of them.
+func tLastResult(
+	t *testing.T,
+	s iSetup,
+	deliveryID string,
+	want int,
+) database.DeliveryResult {
+	t.Helper()
+
+	results := iResults(t, s.WebhookDB, deliveryID)
+	require.Len(t, results, want)
+
+	return results[want-1]
+}
+
+// --- 1. A failure with nothing recorded ---
+
+func TestProcessDelivery_UnknownTargetType_RecordsWhy(
+	t *testing.T,
+) {
+	t.Parallel()
+
+	s := newISetup(t)
+
+	targetID := uuid.New().String()
+
+	event := iSeedEvent(
+		t, s.WebhookDB, s.WebhookID, `{"unknown":"type"}`,
+	)
+
+	seeded := iSeedDelivery(
+		t, s.WebhookDB, event.ID, targetID,
+		database.DeliveryStatusPending,
+	)
+
+	target := database.Target{
+		Name:   "mystery",
+		Type:   tUnknownType,
+		Config: iHTTPConfig("http://example.com/hook"),
+	}
+	target.ID = targetID
+
+	d := database.Delivery{
+		EventID:  event.ID,
+		TargetID: targetID,
+		Status:   database.DeliveryStatusPending,
+		Event:    event,
+		Target:   target,
+	}
+	d.ID = seeded.ID
+
+	body := event.Body
+	task := iTask(
+		seeded, event, s.WebhookID, targetID, "mystery",
+		target.Config, 0, 1, &body,
+	)
+	task.TargetType = tUnknownType
+
+	s.Engine.ExportProcessDelivery(
+		context.Background(), s.WebhookDB, &d, &task,
+	)
+
+	iAssertStatus(
+		t, s.WebhookDB, d.ID, database.DeliveryStatusFailed,
+	)
+
+	last := tLastResult(t, s, d.ID, 1)
+
+	assert.False(t, last.Success)
+	assert.Equal(t, 1, last.AttemptNum)
+	assert.Contains(t, last.Error, string(tUnknownType),
+		"the recorded reason does not name the offending type",
+	)
+}
+
+// --- 2. A retrying delivery whose target is gone ---
+
+func TestRecoverSingleRetry_TargetDeleted(t *testing.T) {
+	t.Parallel()
+
+	s := newISetup(t)
+
+	iCreateWebhook(
+		t, s.MainDB, s.WebhookID, "deleted-target-recovery",
+	)
+
+	deliveryID := tSeedDeletedTarget(
+		t, s, "gone-on-recovery", "http://example.com/hook",
+	)
+
+	s.Engine.ExportRecoverWebhookDeliveries(
+		context.Background(), s.WebhookID,
+	)
+
+	iAssertStatus(
+		t, s.WebhookDB, deliveryID,
+		database.DeliveryStatusFailed,
+	)
+
+	last := tLastResult(t, s, deliveryID, 2)
+
+	assert.False(t, last.Success)
+	assert.Equal(t, 2, last.AttemptNum)
+	assert.Contains(t, last.Error, "gone-on-recovery")
+	assert.Contains(t, last.Error, "was deleted")
+
+	assert.Empty(t, s.Engine.ExportRetryCh(),
+		"a delivery whose target is gone was rescheduled",
+	)
+	assert.Zero(t, s.Engine.ExportInflightHeld(),
+		"the terminal path leaked its ownership reference",
+	)
+}
+
+func TestSweepSingleRetry_TargetDeleted(t *testing.T) {
+	t.Parallel()
+
+	s := newISetup(t)
+
+	iCreateWebhook(
+		t, s.MainDB, s.WebhookID, "deleted-target-sweep",
+	)
+
+	deliveryID := tSeedDeletedTarget(
+		t, s, "gone-on-sweep", "http://example.com/hook",
+	)
+
+	// Twice, because the bug was an error the sweep repeated every
+	// minute for the life of the database: the second sweep must
+	// find nothing left to do.
+	s.Engine.ExportSweepWebhookRetries(
+		context.Background(), s.WebhookID,
+	)
+	s.Engine.ExportSweepWebhookRetries(
+		context.Background(), s.WebhookID,
+	)
+
+	iAssertStatus(
+		t, s.WebhookDB, deliveryID,
+		database.DeliveryStatusFailed,
+	)
+
+	last := tLastResult(t, s, deliveryID, 2)
+
+	assert.Contains(t, last.Error, "gone-on-sweep")
+	assert.Contains(t, last.Error, "was deleted")
+
+	assert.Empty(t, s.Engine.ExportRetryCh())
+	assert.Zero(t, s.Engine.ExportInflightHeld())
+}
+
+// TestSweepSingleRetry_TargetNeverExisted covers the other half of the
+// soft-delete distinction: an id with no row at all, deleted or
+// otherwise, must not be reported as something the operator deleted.
+func TestSweepSingleRetry_TargetNeverExisted(t *testing.T) {
+	t.Parallel()
+
+	s := newISetup(t)
+
+	iCreateWebhook(
+		t, s.MainDB, s.WebhookID, "target-never-existed",
+	)
+
+	targetID := uuid.New().String()
+
+	event := iSeedEvent(
+		t, s.WebhookDB, s.WebhookID, `{"target":"absent"}`,
+	)
+
+	d := iSeedDelivery(
+		t, s.WebhookDB, event.ID, targetID,
+		database.DeliveryStatusRetrying,
+	)
+
+	iSeedFailedResult(t, s.WebhookDB, d.ID)
+
+	s.Engine.ExportSweepWebhookRetries(
+		context.Background(), s.WebhookID,
+	)
+
+	iAssertStatus(
+		t, s.WebhookDB, d.ID, database.DeliveryStatusFailed,
+	)
+
+	last := tLastResult(t, s, d.ID, 2)
+
+	assert.Contains(t, last.Error, targetID)
+	assert.Contains(t, last.Error, "no longer exists")
+	assert.NotContains(t, last.Error, "was deleted",
+		"an id that never named a row was reported as a deletion",
+	)
+}
+
+// TestFailMissingTargetRetry_WritesNoTargetRow holds the new terminal
+// path to the same rule as the existing one: no target row, and so no
+// plaintext target config, may be written into the per-webhook event
+// database. See https://git.eeqj.de/sneak/webhooker/issues/206.
+func TestFailMissingTargetRetry_WritesNoTargetRow(
+	t *testing.T,
+) {
+	t.Parallel()
+
+	s := newISetup(t)
+
+	iCreateWebhook(
+		t, s.MainDB, s.WebhookID, "no-target-row-deleted",
+	)
+
+	hookURL := "https://hooks.slack.com/services/T00/B00/x"
+
+	deliveryID := tSeedDeletedTarget(
+		t, s, "credential-bearing", hookURL,
+	)
+
+	s.Engine.ExportSweepWebhookRetries(
+		context.Background(), s.WebhookID,
+	)
+
+	iAssertStatus(
+		t, s.WebhookDB, deliveryID,
+		database.DeliveryStatusFailed,
+	)
+
+	var configs []string
+
+	require.NoError(t, s.WebhookDB.
+		Table("targets").
+		Pluck("config", &configs).Error)
+
+	assert.Empty(t, configs,
+		"the deleted-target terminal path wrote a target row "+
+			"into the per-webhook event database",
+	)
+}
+
+// --- 3. The scheduled retry chain ---
+
+// tRetryChainSetup wires a counting sink and a retrying delivery
+// against a live target pointing at it, and returns the task a
+// scheduled retry would carry — config and all, snapshotted as
+// ScheduleRetry snapshots it.
+func tRetryChainSetup(
+	t *testing.T,
+	s iSetup,
+	name string,
+	hits *atomic.Int64,
+) (delivery.Task, string) {
+	t.Helper()
+
+	ts := httptest.NewServer(http.HandlerFunc(
+		func(w http.ResponseWriter, _ *http.Request) {
+			hits.Add(1)
+			w.WriteHeader(http.StatusOK)
+		},
+	))
+	t.Cleanup(ts.Close)
+
+	iCreateWebhook(t, s.MainDB, s.WebhookID, name)
+
+	targetID := uuid.New().String()
+	cfg := iHTTPConfig(ts.URL)
+
+	iCreateTarget(
+		t, s.MainDB, targetID, s.WebhookID, name,
+		database.TargetTypeHTTP, cfg, 5,
+	)
+
+	event := iSeedEvent(
+		t, s.WebhookDB, s.WebhookID, `{"chain":"retry"}`,
+	)
+
+	d := iSeedDelivery(
+		t, s.WebhookDB, event.ID, targetID,
+		database.DeliveryStatusRetrying,
+	)
+
+	iSeedFailedResult(t, s.WebhookDB, d.ID)
+
+	body := event.Body
+
+	return iTask(
+		d, event, s.WebhookID, targetID, name, cfg, 5, 2, &body,
+	), targetID
+}
+
+// TestProcessRetryTask_TargetDeleted_MakesNoAttempt is the half the
+// deployability audit found worse than filed: terminalising on
+// recovery and sweep alone leaves the already-scheduled timer chain
+// running, and it holds the target's configuration from before the
+// deletion, so it goes on sending to a destination that was removed.
+func TestProcessRetryTask_TargetDeleted_MakesNoAttempt(
+	t *testing.T,
+) {
+	t.Parallel()
+
+	s := newISetup(t)
+
+	var hits atomic.Int64
+
+	task, targetID := tRetryChainSetup(
+		t, s, "gone-mid-chain", &hits,
+	)
+
+	require.NoError(t, s.MainDB.Delete(
+		&database.Target{}, "id = ?", targetID,
+	).Error)
+
+	s.Engine.ExportProcessRetryTask(
+		context.Background(), &task,
+	)
+
+	assert.Zero(t, hits.Load(),
+		"a scheduled retry fired at a target the operator "+
+			"had already deleted",
+	)
+
+	iAssertStatus(
+		t, s.WebhookDB, task.DeliveryID,
+		database.DeliveryStatusFailed,
+	)
+
+	last := tLastResult(t, s, task.DeliveryID, 2)
+
+	assert.False(t, last.Success)
+	assert.Contains(t, last.Error, "was deleted")
+
+	assert.Zero(t, s.Engine.ExportInflightHeld())
+}
+
+// TestProcessRetryTask_TargetPresent_StillDelivers is the guard's
+// mutation check: a liveness check that refused every retry would pass
+// the test above and break every retry there is.
+func TestProcessRetryTask_TargetPresent_StillDelivers(
+	t *testing.T,
+) {
+	t.Parallel()
+
+	s := newISetup(t)
+
+	var hits atomic.Int64
+
+	task, _ := tRetryChainSetup(t, s, "still-there", &hits)
+
+	s.Engine.ExportProcessRetryTask(
+		context.Background(), &task,
+	)
+
+	assert.Equal(t, int64(1), hits.Load())
+
+	iAssertStatus(
+		t, s.WebhookDB, task.DeliveryID,
+		database.DeliveryStatusDelivered,
+	)
+}
+
+// TestProcessRetryTask_TargetUnreadable_StillDelivers pins the other
+// half of the guard: only a target that is confirmed gone stops a
+// retry. A main database that cannot be read is a transient fault, and
+// a guard that abandoned deliveries on one would be a worse bug than
+// the one it fixes.
+func TestProcessRetryTask_TargetUnreadable_StillDelivers(
+	t *testing.T,
+) {
+	t.Parallel()
+
+	s := newISetup(t)
+
+	var hits atomic.Int64
+
+	task, _ := tRetryChainSetup(t, s, "unreadable-main", &hits)
+
+	sqlDB, err := s.MainDB.DB()
+	require.NoError(t, err)
+	require.NoError(t, sqlDB.Close())
+
+	s.Engine.ExportProcessRetryTask(
+		context.Background(), &task,
+	)
+
+	assert.Equal(t, int64(1), hits.Load(),
+		"a retry was abandoned because the main database "+
+			"could not be read, not because its target was gone",
+	)
+
+	iAssertStatus(
+		t, s.WebhookDB, task.DeliveryID,
+		database.DeliveryStatusDelivered,
+	)
+}
+
+// TestRecoverSingleRetry_TargetUnreadable_LeavesDeliveryAlone is the
+// same rule on the recovery path. A read failure that is not
+// "record not found" must leave every retrying delivery of every
+// webhook exactly as it was.
+func TestRecoverSingleRetry_TargetUnreadable_LeavesDeliveryAlone(
+	t *testing.T,
+) {
+	t.Parallel()
+
+	s := newISetup(t)
+
+	iCreateWebhook(
+		t, s.MainDB, s.WebhookID, "unreadable-on-recovery",
+	)
+
+	targetID := uuid.New().String()
+
+	iCreateTarget(
+		t, s.MainDB, targetID, s.WebhookID, "healthy",
+		database.TargetTypeHTTP,
+		iHTTPConfig("http://example.com/hook"), 5,
+	)
+
+	event := iSeedEvent(
+		t, s.WebhookDB, s.WebhookID, `{"still":"retrying"}`,
+	)
+
+	d := iSeedDelivery(
+		t, s.WebhookDB, event.ID, targetID,
+		database.DeliveryStatusRetrying,
+	)
+
+	iSeedFailedResult(t, s.WebhookDB, d.ID)
+
+	sqlDB, err := s.MainDB.DB()
+	require.NoError(t, err)
+	require.NoError(t, sqlDB.Close())
+
+	s.Engine.ExportRecoverRetryingDeliveries(
+		s.WebhookDB, s.WebhookID,
+	)
+
+	iAssertStatus(
+		t, s.WebhookDB, d.ID,
+		database.DeliveryStatusRetrying,
+	)
+
+	assert.Len(t, iResults(t, s.WebhookDB, d.ID), 1,
+		"an unreadable main database produced a terminal "+
+			"failure row",
+	)
+
+	assert.Zero(t, s.Engine.ExportInflightHeld())
+}

internal/server/http.go

@@ -70,7 +70,7 @@ func (s *Server) serveUntilShutdown() {
 	err := s.httpServer.ListenAndServe()
 	if err != nil && !errors.Is(err, http.ErrServerClosed) {
 		s.log.Error("listen error", "error", err)
-		s.shutdownOnListenFailure()
+		s.shutdownWithFailure()
 	}
 }
 

internal/server/listen_failure_test.go

@@ -93,7 +93,7 @@ func requireListenFailureExit(t *testing.T, env *testEnv) {
 	select {
 	case sig := <-app.Wait():
 		require.Equal(
-			t, server.ListenFailureExitCode, sig.ExitCode,
+			t, server.StartupFailureExitCode, sig.ExitCode,
 			"listen failure must exit non-zero",
 		)
 	case <-time.After(listenFailureDeadline):

internal/server/sentry_failure_test.go

@@ -0,0 +1,99 @@
+package server_test
+
+import (
+	"context"
+	"net"
+	"strconv"
+	"testing"
+	"time"
+
+	"github.com/stretchr/testify/require"
+	"go.uber.org/fx"
+	"sneak.berlin/go/webhooker/internal/config"
+	"sneak.berlin/go/webhooker/internal/globals"
+	"sneak.berlin/go/webhooker/internal/server"
+)
+
+// TestSentryInitFailure_ShutsDownTheApp pins that error reporting
+// which is configured and cannot be started ends the application
+// instead of serving without it.
+//
+// The measured defect logged `sentry init failure` and kept running,
+// so the deployment served traffic with reporting off while every
+// other signal — SENTRY_DSN still set, the startup summary's own
+// field — said it was on. Nothing later in the process can notice
+// that reports are going nowhere, which is why this exits rather than
+// degrades.
+//
+// The DSN is placed on a hand-built Config, which is the only way to
+// reach this branch at all: loadFromEnv now parses SENTRY_DSN with
+// sentry.NewDsn, the same call sentry.Init makes, so a DSN that
+// survives configuration cannot fail initialisation in the SDK
+// version this pins. The branch stays because that is a property of
+// the SDK's current implementation rather than of its contract.
+func TestSentryInitFailure_ShutsDownTheApp(t *testing.T) {
+	t.Parallel()
+
+	port := freePort(t)
+
+	env := newTestEnvWithConfig(t, &config.Config{
+		DataDir:     t.TempDir(),
+		Environment: config.EnvironmentDev,
+		BindAddress: loopbackV4,
+		Port:        port,
+		SentryDSN:   "not-a-dsn",
+	})
+
+	app := fx.New(
+		fx.NopLogger,
+		fx.Supply(env.log, env.cfg, env.mw, env.hnd),
+		fx.Provide(globals.New, server.New),
+		fx.Invoke(func(*server.Server) {}),
+	)
+
+	startCtx, cancelStart := context.WithTimeout(
+		context.Background(), lifecycleTimeout,
+	)
+	defer cancelStart()
+
+	require.NoError(t, app.Start(startCtx))
+
+	select {
+	case sig := <-app.Wait():
+		require.Equal(
+			t, server.StartupFailureExitCode, sig.ExitCode,
+			"a sentry failure must exit non-zero",
+		)
+	case <-time.After(listenFailureDeadline):
+		t.Fatal("a sentry failure left the app running")
+	}
+
+	// The stop sequence still has to complete: the failure must reach
+	// shutdown through fx rather than around it.
+	stopCtx, cancelStop := context.WithTimeout(
+		context.Background(), lifecycleTimeout,
+	)
+	defer cancelStop()
+
+	require.NoError(t, app.Stop(stopCtx))
+
+	// And it must give up before it listens. A process that bound the
+	// port and then exited would have accepted requests it could not
+	// report on, which is the state under test in miniature.
+	requireBindable(t, port)
+}
+
+// requireBindable asserts that the port is free, which it is only if
+// the server under test never claimed it.
+func requireBindable(t *testing.T, port int) {
+	t.Helper()
+
+	var listenCfg net.ListenConfig
+
+	listener, err := listenCfg.Listen(
+		t.Context(), "tcp",
+		net.JoinHostPort(loopbackV4, strconv.Itoa(port)),
+	)
+	require.NoError(t, err, "the server bound a port it then gave up")
+	require.NoError(t, listener.Close())
+}

internal/server/server.go

@@ -51,12 +51,13 @@ const (
 	minSentryFlush = 250 * time.Millisecond
 )
 
-// ListenFailureExitCode is the status the process exits with when the
-// HTTP listener cannot be established, or dies for a reason other
-// than a requested shutdown. It must stay non-zero: systemd
-// `Restart=on-failure` and Docker's restart policies key off it, and a
-// zero exit would read as a deliberate stop.
-const ListenFailureExitCode = 1
+// StartupFailureExitCode is the status the process exits with when
+// the serving goroutine gives up: the HTTP listener cannot be
+// established or dies for a reason other than a requested shutdown, or
+// error reporting is configured and cannot be started. It must stay
+// non-zero: systemd `Restart=on-failure` and Docker's restart policies
+// key off it, and a zero exit would read as a deliberate stop.
+const StartupFailureExitCode = 1
 
 // SentryFlushBudget reports how long the Sentry flush may run when
 // remaining is the time left on the fx stop context after the HTTP
@@ -135,11 +136,25 @@ func New(lc fx.Lifecycle, params ServerParams) (*Server, error) {
 }
 
 // Run configures Sentry and starts serving HTTP requests.
+//
+// A Sentry failure ends the application instead of listening. It runs
+// before the listener rather than after it so that the process never
+// binds a port it is about to give up.
 func (s *Server) Run() {
 	s.configure()
 
 	// logging before sentry, because sentry logs
-	s.enableSentry()
+	err := s.enableSentry()
+	if err != nil {
+		s.log.Error(
+			"SENTRY_DSN is set but error reporting could not be "+
+				"started; refusing to serve with it off",
+			"error", err,
+		)
+		s.shutdownWithFailure()
+
+		return
+	}
 
 	s.serve()
 }
@@ -150,11 +165,23 @@ func (s *Server) MaintenanceMode() bool {
 	return s.params.Config.MaintenanceMode
 }
 
-func (s *Server) enableSentry() {
+// enableSentry initialises the Sentry SDK when error reporting is
+// configured, and reports the failure when it is configured and cannot
+// be initialised. A DSN that is not set is not a failure: reporting
+// stays off and the server starts normally.
+//
+// There is no fallback to running with reporting off. An operator who
+// set SENTRY_DSN asked for failures to be visible, and serving traffic
+// with reporting quietly off is the one state nothing can ever tell
+// them about — the DSN is still set, so every later signal says it is
+// on. Config already refused a DSN the SDK cannot parse, which is what
+// a typo produces, so reaching this branch means the SDK refused
+// something that parsed: not a condition to guess at either.
+func (s *Server) enableSentry() error {
 	s.sentryEnabled.Store(false)
 
-	if s.params.Config.SentryDSN == "" {
-		return
+	if !s.params.Config.SentryEnabled() {
+		return nil
 	}
 
 	err := sentry.Init(sentryClientOptions(
@@ -166,19 +193,19 @@ func (s *Server) enableSentry() {
 		),
 	))
 	if err != nil {
-		s.log.Error("sentry init failure", "error", err)
-		// Don't use fatal since we still want the service to run
-		return
+		return fmt.Errorf("initialising sentry: %w", err)
 	}
 
 	s.log.Info("sentry error reporting activated")
 	s.sentryEnabled.Store(true)
+
+	return nil
 }
 
 // serve installs the signal watcher, starts the listener and blocks
 // until the server's context is cancelled. The process exit status is
 // fx's to decide — from a signal, or from the code
-// shutdownOnListenFailure hands the Shutdowner — so this reports
+// shutdownWithFailure hands the Shutdowner — so this reports
 // nothing back to its caller.
 func (s *Server) serve() {
 	ctx, cancelFunc := context.WithCancel(context.Background())
@@ -208,20 +235,24 @@ func (s *Server) serve() {
 	// Do not call cleanShutdown() here to avoid double invocation.
 }
 
-// shutdownOnListenFailure ends the application after the HTTP
-// listener failed. The fx OnStart hook returns as soon as the serving
-// goroutine is spawned, so nothing downstream of it ever learns that
-// the listen failed: fx reports RUNNING and the process sits alive
-// with nothing bound, which is invisible to systemd and Docker
-// restart policies. Asking the Shutdowner to stop the app with a
-// non-zero code is what turns that into a visible failure.
+// shutdownWithFailure ends the application non-zero from the serving
+// goroutine. It is how anything on that goroutine fails fatally: the
+// fx OnStart hook returns as soon as the goroutine is spawned, so
+// nothing downstream of it ever learns that the goroutine gave up. fx
+// reports RUNNING and the process sits alive having done neither what
+// it was asked nor anything visible instead, which systemd and
+// Docker restart policies cannot see. Asking the Shutdowner to stop
+// the app with a non-zero code is what turns that into a visible
+// failure, and it is the whole of "fatal" here — no panic, no
+// os.Exit, and every stop hook still runs.
 //
-// The context cancel that follows only unwinds serve()'s own wait.
-// The shutdown itself runs through fx's normal stop sequence, so the
-// clean-shutdown drain in cleanShutdown is reached unchanged.
-func (s *Server) shutdownOnListenFailure() {
+// The context cancel that follows only unwinds serve()'s own wait,
+// and is skipped before serve has installed one. The shutdown itself
+// runs through fx's normal stop sequence, so the clean-shutdown drain
+// in cleanShutdown is reached unchanged.
+func (s *Server) shutdownWithFailure() {
 	err := s.params.Shutdowner.Shutdown(
-		fx.ExitCode(ListenFailureExitCode),
+		fx.ExitCode(StartupFailureExitCode),
 	)
 	if err != nil {
 		s.log.Error("shutdown request failed", "error", err)