MaxBodySize logged r.URL.Path untruncated at WARN, and routes.go
registers it ahead of RequireAuth, so an unauthenticated
POST /source/<8 KB>/edit with an oversize declared Content-Length wrote
attacker-chosen text of attacker-chosen length into the operator's log,
for the cost of a request with no body. The 2,560-byte per-line budget
from #146 did not reach it: that budget lives in the access log's field
capping and this is a separate slog call.
The capping mechanism moves out of internal/middleware into
internal/logfield so there is one budget and one implementation rather
than a second ad-hoc truncation. Truncate and EncodedBytes are
unchanged; the access log now spends logfield.MaxBytes where it spent
maxLogFieldBytes.
The sweep the issue asked for found five more call sites of the same
shape, all reachable unauthenticated, all now capped: the CSRF 403
(also registered ahead of RequireAuth), the rate limiters' 429 (the
per-entrypoint receiver limiter is unauthenticated), RequireAuth's own
DEBUG line, the unknown-entrypoint DEBUG line on the receiver, and the
failed-login DEBUG lines. DEBUG being off by default is not a bound: an
operator turning it on to diagnose a flood must not thereby hand the
flood an unbounded write. Every other slog call in the tree was read
and judged; the PR body lists all of them, including the ones left
alone and why.
Two further sites arrived in next with #171 after the first sweep was
written and are capped here as well: "login failure limit exceeded" in
loginguard.go and "password verification capacity exhausted" in
handlers/auth.go, both WARN on the unauthenticated login POST. Neither
was ever wide — chi routes that POST on a static pattern, so r.URL.Path
is the 12-byte constant /pages/login and each line lands near 120
bytes. They are capped because RecordLoginFailure is exported and takes
any *http.Request, so the bound rests on a routing invariant nobody
wrote down, and because the same message at handlers/profile.go logs no
path at all. No request through the mux can widen either line, so their
tests call those two entry points directly with the path a caller on a
parameterised route would supply; that is what the caps defend against,
and an unasserted cap is one a later edit removes for free.
MaxBodySize stays ahead of RequireAuth. An oversize body should be
refused before the request buys a cookie decrypt and a session load,
and rejecting first is what keeps an unauthenticated flood from
choosing how much session work the process does. The ordering and what
it costs are now written at the registration, on maxFormBodySize.
MaxAccessLogLineBytes is restated as the ceiling on every slog line
carrying text an UNAUTHENTICATED client supplies, not just the access
log's: each of these lines carries strictly fewer client-supplied
fields than the access log does, so none can be wider. That is asserted
per line under both handlers rather than argued. The claim is qualified
rather than universal because three kinds of writer are outside it, and
the README and the constant now name all three: lines carrying an
authenticated operator's own input, which are not truncated at all (the
webhook name on "webhook created" reaches 600 KB on one line from a
100 KB form field, measured; the SSRF-rejection url and the target_name
lines are the same shape) and are left uncapped deliberately, since
truncating the operator's own configuration echoed back costs
debuggability against no adversary; the log delivery target, which
exists to emit the whole event; and GORM's default logger, which prints
the interpolated SQL to stdout on a record-not-found and is unbounded
on the receiver and login lookups. That last one is a real defect this
audit turned up and is filed separately as #178, not fixed here.
Tests drive 8 KB of client-chosen text at all eight sites, through both
handlers internal/logger can install and through each character they
escape — including a bare C0 control, which costs six bytes on the line
against the one it cost to send and is the case a raw-byte budget
breaks on first. Each holds the encoded line to the ceiling and asserts
the markers at the far end of the input are absent, so a value that
merely happened to be short cannot pass; for the six sites a request
can widen, the whole flood's output is held to what that ceiling
allows. The two login lines past the username lookup, capped for
uniformity rather than need, are pinned too. internal/logfield gains a
test that measures the per-rune charge against what the handlers really
emit over roughly 3,000 code points on each, so an undercharged rune
fails a test instead of quietly falsifying the ceiling.
Verified by mutation: reverting the MaxBodySize cap alone fails 28
subtests with a 16,583-byte line against the 2,560 ceiling; reverting
the other five fails 70; reverting either login-throttle WARN cap fails
14, through the direct calls those caps exist for; uncapping either of
the two login lines past the username lookup fails both handlers on its
own, so those two are independently pinned rather than jointly;
budgeting raw bytes instead of encoded ones fails 23 across three
packages.
In the shipped default, any stranger denied the operator the only
administrative path at 5 requests per minute: TRUSTED_PROXIES is empty,
the README requires a reverse proxy, so every login POST shared one
bucket keyed on the proxy.
Credentials are now verified first and only a FAILED attempt spends
budget, so a correct password is never throttled. Failures are counted
per (client bucket, submitted username), bounded. Concurrent Argon2id
verifications are capped at two, and the queue for them at 16 — because
verifying first lets an attacker force a 64 MB hash per request, and
bounding the wait alone bounds nothing.
The issue's own recommendation was insufficient and is rejected here:
keying by username stops an attacker locking out a DIFFERENT account,
but this is a single-admin product with a predictable bootstrap
username, so flooding the operator's own name still locks them out.
This is speculative — it implements a corrected recommendation ahead of
the owner's ruling so the decision can be made by merging or reverting.
Three things are disclosed rather than glossed: online guessing rises
from 5/min to roughly 27/s, because the 429 is a label on the response
and not a gate in front of the hash; the residual exposure is a loss of
login AVAILABILITY, not latency, and a determined flood still denies
login while it runs, at ~400x the cost and clearing the moment it
stops; and the endpoint should be provisioned for ~400 MB resident, not
the 203 MB of live commitment it itemises.
Independently reviewed four times. Reviewers disproved the suspected
FIFO starvation by measurement, then caught two successive memory
bounds the code did not have — the second by parking waiters and
reading the heap rather than checking the arithmetic.
The 8 KB render cap from #135 left storage untouched but no route served
the rest, so a body over the cap was reachable only with filesystem
access to the SQLite files — in a product whose purpose is storing
webhooks so they can be inspected.
GET /source/{sourceID}/logs/{eventID}/body serves the whole body to the
webhook's owner, as application/octet-stream with an attachment
disposition and nosniff. Those are a security control, not formatting:
the bytes come from the public receiver and are handed back inside the
operator's authenticated origin, and the existing CSP would not stop a
stored HTML payload executing there. The truncation marker links to it
only when a body was actually cut.
Accepted deviation, documented rather than glossed: #157's definition of
done asks the route to stream from the row. It buffers whole instead,
because database/sql exposes no incremental handle on a SQLite BLOB and
substr range reads re-materialise the entire column per call — an
earlier revision chunked at 64 KiB and was 11-15x slower for a worse
bound. Three independent reviewers confirmed no streaming path exists.
Independently reviewed three times. Two earlier revisions each asserted
a memory bound the code did not have; the final reviewer measured
2.057x at the ingest cap and pinned the two overlapping allocations from
source — the driver's column buffer and database/sql's convertAssign
clone — confirming the stated "roughly two bodies, and 2x is a floor
not a ceiling" is now accurate, since SQLite's own materialisation sits
outside the Go heap.
The receiver was the one unauthenticated, internet-facing endpoint with no
rate limit, so a misbehaving or hostile sender could flood a webhook
without bound. RECEIVER_RATE_LIMIT (default 120/min) now caps it, keyed on
client IP plus entrypoint path so one entrypoint cannot exhaust another's
budget. Over-limit requests get 429 with Retry-After.
The limiter deliberately does not reuse postRateLimit: that helper is
POST-only and keys on IP alone, whereas the receiver must count every
method. A test locks that property in.
Config parsing follows the fail-loudly idiom: a set-but-unparseable or
non-positive value aborts startup rather than falling back to the default.
Known limitation, tracked in #88: the key still trusts forwarded headers
unconditionally, so the limit is evadable by rotating X-Forwarded-For until
trusted-proxy gating lands.
check / check (push) Superseded by a newer commit; never tested
CSRF ran before MaxBodySize, so the CSRF middleware parsed the form body
before any cap applied and an oversized request was read in full before
being rejected. MaxBodySize is now the first middleware in all four route
groups that parse forms, ahead of CSRF and RequireAuth.
An oversize request therefore gets 413 without the handler running and
without state changing, including the password-change route.
Note the ordering trade: an unauthenticated client now receives 413 rather
than an auth redirect on /user/{username}/password.
check / check (push) Superseded by a newer commit; never tested
Adds an authenticated, CSRF-protected flow that lets a user change their own password from the profile page.
## Route
- New `POST /password` under the `/user/{username}` group in `setupUserRoutes` (`internal/server/routes.go`). That group already applies `CSRF`, `NoCache`, and `RequireAuth`, so the new endpoint inherits all three.
## Handler (`internal/handlers/profile.go`)
- `HandlePasswordChange` enforces own-user access: the `{username}` path parameter must equal the session username (same 403 rule `HandleProfile` uses). This check plus the session lookup is factored into a shared `profileOwnerOrDeny` helper now used by both handlers.
- Parses `current_password`, `new_password`, and `confirm_password` (body size limited via `http.MaxBytesReader`).
- Verifies the current password with `database.VerifyPassword` against the stored hash.
- Requires the new password to be non-empty and equal to the confirmation.
- Hashes the new password with `database.HashPassword` — the same Argon2id helper used to bootstrap the admin user — and persists it on the user row. No new crypto.
- Re-renders the profile page with a clear success or error message. Wrong current password, empty new password, and mismatched confirmation are each rejected with their own message and leave the stored hash unchanged.
## Template (`templates/profile.html`)
- Adds a "Change Password" card with current / new / confirm password fields plus the hidden `csrf_token` (matching the login form's CSRF embedding).
- Renders success/error alerts using the existing `alert-success` / `alert-error` styles. No new CSS classes, so no Tailwind rebuild is required.
## Tests (`internal/handlers/profile_test.go`)
- `TestHandlePasswordChange_Success`: seeds a user, posts a valid change, asserts success message and that the stored hash changed and verifies against the new password.
- `TestHandlePasswordChange_WrongCurrentPassword`: posts a wrong current password, asserts the rejection message and that the stored hash is unchanged.
Validated with `docker build .` (fmt-check, lint, test, build) — exit 0.
Closes#65
Co-authored-by: sneak <sneak@sneak.berlin>
Co-authored-by: Jeffrey Paul <sneak@noreply.example.org>
Reviewed-on: #83
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
Adds a `NoCache()` middleware that sets `Cache-Control: no-store` and `Pragma: no-cache`, and wires it onto the dynamic app route groups (`/pages`, `/user/{username}`, `/sources`, `/source/{sourceID}`) adjacent to their existing `CSRF()` call. The static `/s` mount, `/metrics`, `/webhook/{uuid}`, and `/.well-known/healthcheck` are intentionally left untouched (static assets are safe to cache; the others are not authenticated pages).
A middleware unit test asserts both headers are set.
Closes#61
Co-authored-by: sneak <sneak@sneak.berlin>
Reviewed-on: #75
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
Enforces authentication for the `/user/{username}` route group at the middleware layer, matching every other authenticated route group.
## Changes
- **`internal/server/routes.go`** (`setupUserRoutes`): added `r.Use(s.mw.RequireAuth())` immediately after the existing `r.Use(s.mw.CSRF())` on the `/user/{username}` group, so auth is enforced by design (CSRF first, then RequireAuth) — consistent with `/sources` and `/source/{sourceID}`.
- **`internal/handlers/profile.go`** (`HandleProfile`): removed the now-dead unauthenticated-redirect branch (RequireAuth guarantees an authenticated session before the handler runs). The handler still reads the username and user id from the session for the own-profile-only check; a request for another user's profile still returns 403. The session-retrieval error is now handled as a 500.
## Tests (`internal/handlers/profile_test.go`)
- own profile returns 200
- another user's profile returns 403
- an unauthenticated request to `/user/{username}` is redirected to `/pages/login` at the middleware layer and never reaches the endpoint handler (routing-level test replicating the CSRF + RequireAuth chain)
## Validation
`docker build .` (fmt-check, lint, test, build) passes.
Closes#60
Co-authored-by: sneak <sneak@sneak.berlin>
Co-authored-by: Jeffrey Paul <sneak@noreply.example.org>
Reviewed-on: #71
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
Closes [issue #50](#50)
## Summary
Refactors the Dockerfile to use a separate lint stage with a pinned golangci-lint Docker image, following the pattern used by [sneak/pixa](https://git.eeqj.de/sneak/pixa). This replaces the previous approach of installing golangci-lint via curl in the builder stage.
## Changes
### Dockerfile
- **New `lint` stage** using `golangci/golangci-lint:v2.11.3` (Debian-based, pinned by sha256 digest) as a separate build stage
- **Builder stage** depends on lint via `COPY --from=lint /src/go.sum /dev/null` — build won't proceed unless linting passes
- **Go bumped** from 1.24 to 1.26.1 (`golang:1.26.1-bookworm`, pinned by sha256)
- **golangci-lint bumped** from v1.64.8 to v2.11.3
- All three Docker images (golangci-lint, golang, alpine) pinned by sha256 digest
- Debian-based golangci-lint image used (not Alpine) because mattn/go-sqlite3 CGO does not compile on musl (off64_t)
### Linter Config (.golangci.yml)
- Migrated from v1 to v2 format (`version: "2"` added)
- Removed linters no longer available in v2: `gofmt` (handled by `make fmt-check`), `gosimple` (merged into `staticcheck`), `typecheck` (always-on in v2)
- Same set of linters enabled — no rules weakened
### Code Fixes (all lint issues from v2 upgrade)
- Added package comments to all packages
- Added doc comments to all exported types, functions, and methods
- Fixed unchecked errors flagged by `errcheck` (sqlDB.Close, os.Setenv in tests, resp.Body.Close, fmt.Fprint)
- Fixed unused parameters flagged by `revive` (renamed to `_`)
- Fixed `gosec` G120 warnings: added `http.MaxBytesReader` before `r.ParseForm()` calls
- Fixed `staticcheck` QF1012: replaced `WriteString(fmt.Sprintf(...))` with `fmt.Fprintf`
- Fixed `staticcheck` QF1003: converted if/else chain to tagged switch
- Renamed `DeliveryTask` → `Task` to avoid package stutter (`delivery.Task` instead of `delivery.DeliveryTask`)
- Renamed shadowed builtin `max` parameter to `upperBound` in `cryptoRandInt`
- Used `t.Setenv` instead of `os.Setenv` in tests (auto-restores)
### README.md
- Updated version requirements: Go 1.26+, golangci-lint v2.11+
- Updated Dockerfile description in project structure
## Verification
`docker build .` passes cleanly — formatting check, linting, all tests, and build all succeed.
Co-authored-by: clawbot <clawbot@noreply.git.eeqj.de>
Reviewed-on: #55
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
## Summary
This PR implements three security hardening measures:
### Security Headers Middleware (closes #34)
Adds a `SecurityHeaders()` middleware applied globally to all routes. Every response now includes:
- `Strict-Transport-Security: max-age=63072000; includeSubDomains; preload`
- `X-Content-Type-Options: nosniff`
- `X-Frame-Options: DENY`
- `Content-Security-Policy: default-src 'self'; script-src 'self' 'unsafe-inline'; style-src 'self' 'unsafe-inline'`
- `Referrer-Policy: strict-origin-when-cross-origin`
- `Permissions-Policy: camera=(), microphone=(), geolocation=()`
### Session Fixation Prevention (closes #38)
Adds a `Regenerate()` method to the session manager that destroys the old session and creates a new one with a fresh ID, copying all session values. Called after successful login to prevent session fixation attacks.
### Request Body Size Limits (closes #39)
Adds a `MaxBodySize()` middleware using `http.MaxBytesReader` to limit POST/PUT/PATCH request bodies to 1 MB. Applied to all form endpoints (`/pages`, `/sources`, `/source/*`).
## Files Changed
- `internal/middleware/middleware.go` — Added `SecurityHeaders()` and `MaxBodySize()` middleware
- `internal/session/session.go` — Added `Regenerate()` method for session fixation prevention
- `internal/handlers/auth.go` — Updated login handler to regenerate session after authentication
- `internal/server/routes.go` — Added SecurityHeaders globally, MaxBodySize to form route groups
- `README.md` — Documented new middleware in stack, updated Security section, moved items to completed TODO
closes #34, closes #38, closes #39
Co-authored-by: clawbot <clawbot@noreply.git.eeqj.de>
Reviewed-on: #41
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
DBURL → DATA_DIR consolidation:
- Remove DBURL env var entirely; main DB now lives at {DATA_DIR}/webhooker.db
- database.go constructs DB path from config.DataDir, ensures dir exists
- Update DATA_DIR prod default from /data/events to /data
- Update all tests to use DataDir instead of DBURL
- Update Dockerfile: /data (not /data/events) for all SQLite databases
- Update README configuration table, Docker examples, architecture docs
Dead code removal:
- Remove unused IndexResponse struct (handlers/index.go)
- Remove unused TemplateData struct (handlers/handlers.go)
Stale comment cleanup:
- Remove TODO in server.go (DB cleanup handled by fx lifecycle)
- Fix nolint:golint → nolint:revive on ServerParams for consistency
- Clean up verbose middleware/routing comments in routes.go
- Fix TODO fan-out description (worker pool, not goroutine-per-target)
.gitignore fixes:
- Add data/ directory to gitignore
- Remove stale config.yaml entry (env-only config since rework)
The "database" target type now writes events to a separate
archived_events table instead of just marking the delivery as done.
This table persists independently of internal event retention/pruning,
allowing the data to be consumed by external systems or preserved
indefinitely.
New ArchivedEvent model copies the full event payload (method, headers,
body, content_type) along with webhook/entrypoint/event/target IDs.
Add toggle (activate/deactivate) and delete buttons for individual
entrypoints and targets on the webhook detail page. Each action is a
POST form submission with ownership verification.
New routes:
POST /source/{id}/entrypoints/{entrypointID}/delete
POST /source/{id}/entrypoints/{entrypointID}/toggle
POST /source/{id}/targets/{targetID}/delete
POST /source/{id}/targets/{targetID}/toggle
Add method check at the top of HandleWebhook, returning 405 Method Not
Allowed with an Allow: POST header for any non-POST request. This
prevents GET, PUT, DELETE, etc. from being accepted at entrypoint URLs.
Add RequireAuth middleware that checks for a valid session and
redirects unauthenticated users to /pages/login. Applied to all
/sources and /source/{sourceID} routes. The middleware uses the
existing session package for authentication checks.
closes #9
The top-level entity that groups entrypoints and targets is now called
Webhook (was Processor). The inbound URL endpoint entity is now called
Entrypoint (was Webhook). This rename affects database models, handler
comments, routes, and README documentation.
closes #12
## Summary
This PR brings the webhooker repo into full REPO_POLICIES compliance, addressing both [issue #1](#1) and [issue #2](#2).
## Changes
### New files
- **`cmd/webhooker/main.go`** — The missing application entry point. Uses Uber fx to wire together all internal packages (config, database, logger, server, handlers, middleware, healthcheck, globals, session). Minimal glue code.
- **`REPO_POLICIES.md`** — Fetched from authoritative source (`sneak/prompts`)
- **`.editorconfig`** — Fetched from authoritative source
- **`.dockerignore`** — Sensible Go project exclusions
- **`.gitea/workflows/check.yml`** — CI workflow that runs `docker build .` on push to any branch (Gitea Actions format, actions/checkout pinned by sha256)
- **`configs/config.yaml.example`** — Moved from root `config.yaml`
### Modified files
- **`Makefile`** — Complete rewrite with all REPO_POLICIES required targets: `test`, `lint`, `fmt`, `fmt-check`, `check`, `build`, `hooks`, `docker`, `clean`, plus `dev`, `run`, `deps`
- **`Dockerfile`** — Complete rewrite:
- Builder: `golang:1.24` (Debian-based, pinned by `sha256:d2d2bc1c84f7...`). Debian needed because `gorm.io/driver/sqlite` pulls `mattn/go-sqlite3` (CGO) which fails on Alpine musl.
- golangci-lint v1.64.8 installed from GitHub release archive with sha256 verification (v1.x because `.golangci.yml` uses v1 config format)
- Runs `make check` (fmt-check + lint + test + build) as build step
- Final stage: `alpine:3.21` (pinned by `sha256:c3f8e73fdb79...`) with non-root user, healthcheck, port 8080
- **`README.md`** — Rewritten with all required REPO_POLICIES sections: description line with name/purpose/category/license/author, Getting Started, Rationale, Design, TODO (integrated from TODO.md), License, Author
- **`.gitignore`** — Fixed `webhooker` pattern to `/webhooker` (was blocking `cmd/webhooker/`), added `config.yaml` to prevent committing runtime config with secrets
- **`static/static.go`** — Removed `vendor` from embed directive (directory was empty/missing)
- **`internal/database/database_test.go`** — Fixed to use in-memory config via `afero.MemMapFs` instead of depending on `config.yaml` on disk. Test is now properly isolated.
- **`go.mod`/`go.sum`** — `go mod tidy`
### Removed files
- **`TODO.md`** — Content integrated into README.md TODO section
- **`config.yaml`** — Moved to `configs/config.yaml.example`
## Verification
- `docker build .` passes (lint ✅, test ✅, build ✅)
- All existing tests pass with no modifications to assertions or test logic
- `.golangci.yml` untouched
closes #1
closes #2
Co-authored-by: clawbot <clawbot@noreply.git.eeqj.de>
Reviewed-on: #6
Co-authored-by: clawbot <clawbot@noreply.example.org>
Co-committed-by: clawbot <clawbot@noreply.example.org>
