Trust the RFC 1918 ranges as proxies when TRUSTED_PROXIES is unset (closes #333)

Unset or empty, TRUSTED_PROXIES now defaults to 10.0.0.0/8,
172.16.0.0/12 and 192.168.0.0/16, so a reverse proxy reaching the app
over a Docker network or a private LAN gets per-client rate-limit
buckets without configuration. A set value replaces the default; an
unparseable one still fails startup.

The startup warning for an empty list goes, with its test hook and
test, since the default is no longer empty. The README's
configuration table, Trusted proxies, upaas and reverse-proxy sections
describe the new default and when to narrow it to the proxy alone.

Model: opus-5-5

README.md

@@ -147,7 +147,7 @@ TTY detection, and security headers are always applied.
 | `RETENTION_SWEEP_INTERVAL` | How often the retention reaper and archive sweeper run (Go duration, must be positive) | `1h` |
 | `SESSION_IDLE_TIMEOUT`  | Idle session timeout (Go duration)  | `24h`    |
 | `RECEIVER_RATE_LIMIT`   | Receiver requests/minute per IP per entrypoint (10x that per IP across the route) | `120` |
-| `TRUSTED_PROXIES`       | CIDRs whose forwarded headers are trusted (unset: all clients behind a proxy share one rate-limit bucket; a correct login password is never throttled either way) | `""` (none) |
+| `TRUSTED_PROXIES`       | CIDRs whose forwarded headers are trusted. A set value replaces the default. If clients connect directly from private addresses, set it to the proxy's address alone. See [Trusted proxies](#trusted-proxies) | `10.0.0.0/8,172.16.0.0/12,192.168.0.0/16` (RFC 1918) |
 | `ALLOWED_EGRESS_CIDRS`  | CIDRs that delivery targets may reach despite the SSRF blocklist. Read [Allowing egress to your own network](#allowing-egress-to-your-own-network) before setting it | `""` (none) |
 
 #### Allowing egress to your own network
@@ -372,41 +372,43 @@ unlocked.
 `TRUSTED_PROXIES` is a comma-separated list of CIDR blocks (a bare
 address such as `192.168.1.7` is accepted and treated as a single
 host), for example `192.168.1.7, 2001:db8::5`. It decides whose
-`X-Forwarded-For` header the rate limiters believe, so it should name
-the addresses of your reverse proxies and nothing else.
+`X-Forwarded-For` header the rate limiters believe, so it should cover
+the addresses of your reverse proxies.
 
 `X-Forwarded-For` is honoured **only** when the connecting peer is
 inside one of these blocks; for every other peer the client identity is
-the connection's own address and the header is ignored. The default is
-the empty list, which trusts nobody — anything else would let any
-client pick its own rate limit bucket, minting a fresh one per request
-or draining someone else's. Set it to the address of your reverse
-proxy, and to nothing wider. A set but unparseable value aborts
-startup.
+the connection's own address and the header is ignored. Unset (or
+empty), the list is the RFC 1918 private ranges: `10.0.0.0/8`,
+`172.16.0.0/12` and `192.168.0.0/16`. That covers a reverse proxy
+reaching webhooker over a Docker network or a private LAN without
+anything set. A set value replaces the default entirely. A set but
+unparseable value aborts startup.
 
-That default is safe against forged headers, but leaving it unset in
-production has a cost you must know about. Production runs behind a
-TLS-terminating reverse proxy, so with `TRUSTED_PROXIES` unset every
-request keys on the proxy's own address and all clients share a single
+Trusting those ranges has two consequences:
+
+- Any peer in them chooses its own rate-limit key through
+  `X-Forwarded-For` (see the requirements below). If your clients
+  connect to webhooker directly from private addresses, set
+  `TRUSTED_PROXIES` to the proxy's address alone.
+- Clients whose own addresses are private are skipped as trusted hops
+  when the chain is walked (below), so one that sends no
+  `X-Forwarded-For` of its own shares the proxy's bucket. Setting the
+  list to the proxy's address alone gives each its own bucket.
+
+A proxy the list does not cover, such as nginx on the same host
+reaching webhooker over loopback, is not trusted: every request through
+it keys on the proxy's own address and all clients share a single
 bucket per limit. The receiver limits become service-wide ceilings,
 and the login endpoint's failure counting collapses onto one key, so a
 stranger's wrong passwords throttle every other client's wrong
-passwords.
+passwords. Set `TRUSTED_PROXIES` to that proxy's address to restore
+per-client buckets.
 
 What it cannot do is lock the operator out. The login endpoint
 verifies credentials **before** it consults any limit and charges only
 failures, so a correct password is never throttled no matter how full
 the bucket is. See [Rate Limiting](#rate-limiting).
 
-The remedy is to set `TRUSTED_PROXIES` to your reverse proxy's
-address, which restores per-client buckets. webhooker logs a warning
-at startup whenever `TRUSTED_PROXIES` is empty, in every environment,
-because behind a proxy every client shares one bucket in `dev` and
-`prod` alike. The warning is informational when nothing proxies to the
-process: with no proxy in front, the peer address is the client's own
-and the buckets are already per-client. See
-[Rate Limiting](#rate-limiting) for what each limit shares.
-
 `X-Real-IP` and `True-Client-IP` are **never** read, from any peer.
 Reverse proxies append to `X-Forwarded-For` but forward other client
 headers verbatim, so a single-valued header is client-controlled even
@@ -428,14 +430,14 @@ Two operator requirements follow:
   (nginx `$proxy_add_x_forwarded_for`, HAProxy `option forwardfor`,
   Caddy and AWS ALB by default), and must append a bare address with
   no port.
-- List proxy hosts **only**. Any address inside `TRUSTED_PROXIES`
+- Keep clients out of the list. Any address inside `TRUSTED_PROXIES`
   chooses its own rate-limit key: its `X-Forwarded-For` is walked, so
   it can name a different address on every request to get a fresh
   bucket each time, or name another client's address to drain that
-  client's bucket. Never list a block that also covers clients — a
-  broad `10.0.0.0/8` on a network where clients live in the same range
-  makes all three limits, including the unauthenticated webhook
-  receiver, silently bypassable by every client in the block.
+  client's bucket. A block that also covers clients — the default, on
+  a network where clients have private addresses — makes all three
+  limits, including the unauthenticated webhook receiver, silently
+  bypassable by every client in the block.
 
 #### Sessions
 
@@ -757,10 +759,14 @@ repository's `Dockerfile` and runs it. The app needs:
 
 - **Environment variables:**
     - `WEBHOOKER_ENVIRONMENT=prod`
-    - `TRUSTED_PROXIES`: your reverse proxy's address on that Docker
-      network. The `remoteIP` field of the `http request` log line for a
-      request that came through the proxy shows it; the health check's
-      own lines show `::1`. See [Trusted proxies](#trusted-proxies).
+    - `TRUSTED_PROXIES`: normally leave it unset. Docker networks use
+      private addresses, so the default covers your reverse proxy on
+      that network. If the network's addresses are outside the RFC 1918
+      ranges, or clients reach the app from private addresses other
+      than through the proxy, set it to the proxy's address there. The
+      `remoteIP` field of the `http request` log line for a request that
+      came through the proxy shows it; the health check's own lines show
+      `::1`. See [Trusted proxies](#trusted-proxies).
     - Leave `BIND_ADDRESS` and `DATA_DIR` unset: the image sets
       `BIND_ADDRESS` to `0.0.0.0`, and `DATA_DIR` defaults to
       `/var/lib/webhooker`.
@@ -823,12 +829,15 @@ reports.
    behind a proxy means the `X-Forwarded-Proto` header. The block below
    sets it; without it every request is read as plaintext and cookies
    ship without `Secure`. See [Configuration](#configuration).
-3. **Set `TRUSTED_PROXIES` to the proxy's address.** Unset, every rate
-   limiter keys on the connecting peer, which behind a proxy is the
-   proxy on every request: all clients collapse into one global bucket
-   per limit and the receiver's per-IP limits become service-wide
-   ceilings. See [Trusted proxies](#trusted-proxies). List the proxy
-   and nothing else.
+3. **Make sure `TRUSTED_PROXIES` covers the proxy's address.** Unset,
+   it covers the RFC 1918 private ranges, so a proxy on a Docker
+   network or a private LAN is covered and one on loopback is not. For
+   a proxy it does not cover, every rate limiter keys on the connecting
+   peer, which is the proxy on every request: all clients collapse into
+   one global bucket per limit and the receiver's per-IP limits become
+   service-wide ceilings. See [Trusted proxies](#trusted-proxies). If
+   clients also connect from private addresses, list the proxy and
+   nothing else.
 4. **Send `Host` as `$http_host`, not `$host`.** `$host` strips the
    port. webhooker's Origin/Referer check compares against the host it
    was given, so on any port other than 443 `$host` makes every form
@@ -1389,10 +1398,11 @@ It uses:
 - **[go-chi/httprate](https://github.com/go-chi/httprate)** for
   sliding-window rate limiting of the password-change and webhook
   receiver endpoints. The bucket is per client IP only when
-  `TRUSTED_PROXIES` names the reverse proxy; unset, every client
-  behind that proxy shares one bucket per limit. The login endpoint
-  counts failed attempts itself instead, so that a correct password is
-  never throttled (see [Rate Limiting](#rate-limiting))
+  `TRUSTED_PROXIES` covers the reverse proxy (by default it covers the
+  RFC 1918 private ranges); otherwise every client behind that proxy
+  shares one bucket per limit. The login endpoint counts failed
+  attempts itself instead, so that a correct password is never
+  throttled (see [Rate Limiting](#rate-limiting))
 - **[Prometheus](https://prometheus.io)** for metrics, served at
   `/metrics` behind basic auth
 - **[Sentry](https://sentry.io)** for optional error reporting
@@ -2573,30 +2583,30 @@ let one subscriber rotate source addresses and mint a fresh bucket per
 request, evading these limits at the network layer without spoofing
 anything; the cost is that distinct clients inside one `/64` share a
 bucket. IPv4-mapped addresses (`::ffff:1.2.3.4`) key as the IPv4 address
-they carry. See [Trusted proxies](#trusted-proxies). Deployed without that
-variable set, a client behind a reverse proxy shares one bucket with
-every other client behind the same proxy. Set `TRUSTED_PROXIES` to the
-proxy's address to get per-client limits back. What the shared bucket
+they carry. See [Trusted proxies](#trusted-proxies). When that variable
+does not cover the reverse proxy, a client behind it shares one bucket
+with every other client behind the same proxy. Set `TRUSTED_PROXIES` to
+the proxy's address to get per-client limits back. What the shared bucket
 costs is not the same for every limiter, and the two cases pull in
 opposite directions:
 
 - For the **receiver** limits it costs throughput, which is the safe
   direction to be wrong in: sharing can only make a limit bind sooner,
   never let a sender past it. It matters more for the aggregate limit
-  than for the per-entrypoint one: with `TRUSTED_PROXIES` unset behind
-  the reverse proxy a production deployment is required to run behind,
-  every request keys on the proxy, so the aggregate limit becomes a
-  service-wide ceiling of 1200 requests per minute across all senders
-  and all entrypoints, where the per-entrypoint limit's capacity still
-  grows with the number of entrypoints. Any deployment with more than a
-  handful of busy entrypoints must set `TRUSTED_PROXIES`.
+  than for the per-entrypoint one: when `TRUSTED_PROXIES` does not
+  cover the reverse proxy a production deployment is required to run
+  behind, every request keys on the proxy, so the aggregate limit
+  becomes a service-wide ceiling of 1200 requests per minute across all
+  senders and all entrypoints, where the per-entrypoint limit's
+  capacity still grows with the number of entrypoints. Any deployment
+  with more than a handful of busy entrypoints must make sure
+  `TRUSTED_PROXIES` covers its proxy.
 - For the **login and password-change** limits it costs precision, not
   availability. Login failures from every client land in one counter,
   so a stranger's wrong passwords make the operator's own wrong
   passwords answer `429` sooner; the operator's _correct_ password is
   never affected, because it is never counted. Production deployments
-  should still set `TRUSTED_PROXIES`; webhooker warns at startup
-  whenever it is empty, in any environment.
+  should still make sure `TRUSTED_PROXIES` covers their proxy.
 
 #### The login endpoint
 
@@ -3057,10 +3067,9 @@ check, see [The login endpoint](#the-login-endpoint).
   It runs behind session auth, so only a client already holding a
   valid session reaches it, and an operator throttled out of changing
   a password can still log in. The bucket is per client IP only when
-  `TRUSTED_PROXIES` names the reverse proxy; unset, every client
+  `TRUSTED_PROXIES` covers the reverse proxy; otherwise every client
   shares one bucket, which costs precision rather than availability
-  (see [Rate Limiting](#rate-limiting)). webhooker warns at startup
-  whenever `TRUSTED_PROXIES` is empty
+  (see [Rate Limiting](#rate-limiting))
 - Prometheus metrics behind basic auth
 - Static assets embedded in binary (no filesystem access needed at
   runtime)

internal/config/config.go

@@ -75,6 +75,11 @@ const (
 	// internet-exposed endpoint.
 	defaultReceiverRateLimit = 120
 
+	// defaultTrustedProxies is TRUSTED_PROXIES when it is unset: the
+	// RFC 1918 private ranges, which a reverse proxy reaching the
+	// process over a Docker network or a private LAN connects from.
+	defaultTrustedProxies = "10.0.0.0/8,172.16.0.0/12,192.168.0.0/16"
+
 	// maxPort is the highest valid TCP port number. The lower
 	// bound (at least 1) is enforced by envPositiveInt.
 	maxPort = 65535
@@ -172,13 +177,13 @@ type Config struct {
 
 	// TrustedProxies is the set of networks whose members are
 	// allowed to speak for the client with X-Forwarded-For, the
-	// only forwarded header read. It is empty unless
-	// TRUSTED_PROXIES is set, and empty means no peer is
-	// trusted: forwarded headers are then ignored entirely and
-	// clients are identified by the connection's own address.
-	// Members can choose their own rate-limit key, so this must
-	// name proxy hosts only, never a block that also covers
-	// clients.
+	// only forwarded header read. Unless TRUSTED_PROXIES is set it
+	// is the RFC 1918 private ranges (defaultTrustedProxies).
+	// Other peers' forwarded headers are ignored and they are
+	// identified by the connection's own address. Members can
+	// choose their own rate-limit key, so where clients also
+	// connect from private addresses this must be set to the
+	// proxy hosts alone.
 	TrustedProxies []netip.Prefix
 
 	// AllowedEgressCIDRs is the set of networks a delivery target
@@ -459,14 +464,15 @@ func parseCIDR(entry string) (netip.Prefix, error) {
 
 // envPrefixList returns the value of the named environment variable
 // parsed as a comma-separated list of CIDR blocks (bare addresses
-// allowed). An unset, empty, or blank value yields an empty list. A
-// set value containing an unparseable entry is a hard error naming
-// the key and the bad entry, so startup fails loudly rather than
-// silently running with a list the operator did not intend.
-func envPrefixList(key string) ([]netip.Prefix, error) {
+// allowed). An unset, empty, or blank value is read as defaultValue
+// instead. A set value containing an unparseable entry is a hard
+// error naming the key and the bad entry, so startup fails loudly
+// rather than silently running with a list the operator did not
+// intend.
+func envPrefixList(key, defaultValue string) ([]netip.Prefix, error) {
 	v := strings.TrimSpace(os.Getenv(key))
 	if v == "" {
-		return nil, nil
+		v = defaultValue
 	}
 
 	var prefixes []netip.Prefix
@@ -680,12 +686,12 @@ func loadFromEnv() (*Config, error) {
 		return nil, err
 	}
 
-	trustedProxies, err := envPrefixList("TRUSTED_PROXIES")
+	trustedProxies, err := envPrefixList("TRUSTED_PROXIES", defaultTrustedProxies)
 	if err != nil {
 		return nil, err
 	}
 
-	allowedEgressCIDRs, err := envPrefixList("ALLOWED_EGRESS_CIDRS")
+	allowedEgressCIDRs, err := envPrefixList("ALLOWED_EGRESS_CIDRS", "")
 	if err != nil {
 		return nil, err
 	}
@@ -757,50 +763,6 @@ func (c *Config) warnEgressAllowlist(log *slog.Logger) {
 	)
 }
 
-// warnSharedRateLimitBucket logs a startup warning whenever
-// TRUSTED_PROXIES is empty, in any environment.
-//
-// With no trusted proxies every rate limiter keys on the connecting
-// peer's address. Whether that is harmless or dangerous depends on
-// what is in front of the process, which this code cannot observe:
-// with nothing in front, the peer is the client and the limits are
-// per-client as intended; behind a reverse proxy the peer is the proxy
-// for every request, so all clients share one bucket per limiter.
-//
-// The login endpoint no longer spends budget on arrival — it verifies
-// credentials first and charges only failures — so a shared bucket
-// cannot deny the operator a correct password. What it does collapse
-// is the failure counting: one client's wrong passwords throttle
-// everyone else's wrong passwords, and the receiver's limits become
-// service-wide ceilings.
-//
-// The warning is deliberately not gated on WEBHOOKER_ENVIRONMENT:
-// behind a proxy every client shares one bucket in dev and prod alike.
-//
-// The default of trusting nobody is deliberate — trusting forwarded
-// headers from arbitrary peers lets any client choose its own bucket —
-// so this warns rather than failing startup or changing the key.
-func (c *Config) warnSharedRateLimitBucket(log *slog.Logger) {
-	if len(c.TrustedProxies) > 0 {
-		return
-	}
-
-	log.Warn(
-		"TRUSTED_PROXIES is empty: every rate limit keys on the "+
-			"connecting peer's address. With nothing proxying to "+
-			"this process that is the client itself and the limits "+
-			"are per-client as intended. Behind a reverse proxy the "+
-			"peer is the proxy on every request, so all clients "+
-			"share one bucket per limit: the receiver limits become "+
-			"service-wide ceilings, and one client's failed logins "+
-			"throttle every other client's failed logins — a "+
-			"correct password still gets in. If anything proxies to "+
-			"this process, set TRUSTED_PROXIES to its address.",
-		"environment", c.Environment,
-		"trustedProxies", len(c.TrustedProxies),
-	)
-}
-
 // New creates a Config by reading environment variables.
 //
 //nolint:revive // lc parameter is required by fx even if unused.
@@ -846,7 +808,6 @@ func New(lc fx.Lifecycle, params ConfigParams) (*Config, error) {
 		"hasMetricsAuth", s.MetricsAuthEnabled(),
 	)
 
-	s.warnSharedRateLimitBucket(log)
 	s.warnEgressAllowlist(log)
 
 	return s, nil

internal/config/config_test.go

@@ -551,6 +551,11 @@ func testReceiverRateLimitSuccess(
 }
 
 func TestTrustedProxies(t *testing.T) {
+	// Unset, the RFC 1918 private ranges are trusted, so a reverse
+	// proxy on a Docker network or a private LAN is covered without
+	// configuration.
+	defaultProxies := []string{cidrPrivateV4, "172.16.0.0/12", "192.168.0.0/16"}
+
 	tests := []struct {
 		name        string
 		set         bool
@@ -559,18 +564,21 @@ func TestTrustedProxies(t *testing.T) {
 		expected    []string
 	}{
 		{
-			// The default must be "trust nobody": an empty list
-			// means forwarded headers are ignored, never that
-			// every peer may speak for the client.
 			name:     caseUnsetUsesDefault,
 			set:      false,
-			expected: []string{},
+			expected: defaultProxies,
 		},
 		{
-			name:     "blank value trusts nothing",
+			name:     "blank value uses default",
 			set:      true,
 			value:    "  ",
-			expected: []string{},
+			expected: defaultProxies,
+		},
+		{
+			name:     "set value replaces the default entirely",
+			set:      true,
+			value:    "203.0.113.7",
+			expected: []string{"203.0.113.7/32"},
 		},
 		{
 			name:  caseValidValueParsed,
@@ -844,101 +852,6 @@ func TestEgressAllowlistWarning(t *testing.T) {
 	}
 }
 
-// TestSharedRateLimitBucketWarning covers the startup warning that
-// tells an operator a deployment behind a reverse proxy shares one
-// rate-limit bucket between every client, which turns the receiver
-// limits into service-wide ceilings and collapses login failure
-// counting. It must fire whenever TRUSTED_PROXIES is empty, in any
-// environment, because behind a proxy every client shares one bucket
-// in dev and prod alike. It stays quiet once proxies are named.
-func TestSharedRateLimitBucketWarning(t *testing.T) {
-	tests := []struct {
-		name           string
-		environment    string
-		trustedProxies string
-		expectWarning  bool
-	}{
-		{
-			name:          "prod without trusted proxies warns",
-			environment:   config.EnvironmentProd,
-			expectWarning: true,
-		},
-		{
-			name:           "prod with trusted proxies is quiet",
-			environment:    config.EnvironmentProd,
-			trustedProxies: cidrPrivateV4,
-			expectWarning:  false,
-		},
-		{
-			name:          "dev without trusted proxies warns",
-			environment:   config.EnvironmentDev,
-			expectWarning: true,
-		},
-		{
-			name:           "dev with trusted proxies is quiet",
-			environment:    config.EnvironmentDev,
-			trustedProxies: cidrPrivateV4,
-			expectWarning:  false,
-		},
-	}
-
-	for _, tt := range tests {
-		t.Run(tt.name, func(t *testing.T) {
-			// Cannot use t.Parallel() here because t.Setenv
-			// is incompatible with parallel subtests.
-			t.Setenv("WEBHOOKER_ENVIRONMENT", tt.environment)
-
-			if tt.trustedProxies == "" {
-				require.NoError(
-					t, os.Unsetenv("TRUSTED_PROXIES"),
-				)
-			} else {
-				t.Setenv("TRUSTED_PROXIES", tt.trustedProxies)
-			}
-
-			var buf bytes.Buffer
-
-			log := slog.New(slog.NewJSONHandler(
-				&buf, &slog.HandlerOptions{
-					Level: slog.LevelDebug,
-				},
-			))
-
-			require.NoError(
-				t,
-				config.WarnSharedRateLimitBucketForTest(log),
-			)
-
-			if !tt.expectWarning {
-				assert.Empty(t, buf.String())
-
-				return
-			}
-
-			logged := buf.String()
-
-			assert.Contains(t, logged, `"level":"WARN"`)
-			assert.Contains(t, logged, "TRUSTED_PROXIES")
-			assert.Contains(t, logged, "share one bucket")
-			assert.Contains(
-				t, logged, "throttle every other client's failed logins",
-			)
-			// The warning must not claim a lockout the login
-			// endpoint no longer permits: credentials are verified
-			// before any budget is spent.
-			assert.Contains(
-				t, logged, "a correct password still gets in",
-			)
-			// The text must stay accurate for a developer with
-			// nothing in front of the process, where an empty
-			// list costs nothing.
-			assert.Contains(
-				t, logged, "nothing proxying to this process",
-			)
-		})
-	}
-}
-
 // metricsEnv describes what one subtest below puts in the
 // environment for a single METRICS_ variable. A variable that is
 // set to the empty string and one that is not set at all are

internal/config/export_test.go

@@ -6,21 +6,6 @@ import "log/slog"
 // the external config_test package so each helper can be covered by
 // its own table-driven test without weakening the package API.
 
-// WarnSharedRateLimitBucketForTest loads a Config from the current
-// environment and emits its startup warnings to log. The real logger
-// writes to stdout, so this lets the warning's firing condition be
-// asserted against a handler the test controls.
-func WarnSharedRateLimitBucketForTest(log *slog.Logger) error {
-	c, err := loadFromEnv()
-	if err != nil {
-		return err
-	}
-
-	c.warnSharedRateLimitBucket(log)
-
-	return nil
-}
-
 // WarnEgressAllowlistForTest loads a Config from the current
 // environment and emits its egress-allowlist startup warning to
 // log, so a test can assert both that the warning fires only when

internal/handlers/auth.go

@@ -103,9 +103,10 @@ func (h *Handlers) renderLoginError(
 // The credential check runs BEFORE any rate-limit budget is
 // consulted, and only a failed check spends budget. That is what
 // keeps the single administrative path reachable: behind the reverse
-// proxy this deployment requires, with TRUSTED_PROXIES unset, every
-// client shares one bucket, so a limiter spent on arrival lets any
-// stranger deny the operator's own correct password indefinitely.
+// proxy this deployment requires, when TRUSTED_PROXIES does not cover
+// it, every client shares one bucket, so a limiter spent on arrival
+// lets any stranger deny the operator's own correct password
+// indefinitely.
 //
 // Verifying first means every login POST costs an Argon2id hash, so
 // the work is taken under a bounded number of verification slots.

internal/handlers/auth_test.go

@@ -25,7 +25,7 @@ const (
 
 	// sharedProxyPeer is the whole point of this file. Production is
 	// required to run behind a TLS-terminating reverse proxy, and
-	// TRUSTED_PROXIES defaults to empty, so every client — attacker
+	// when TRUSTED_PROXIES does not cover it every client — attacker
 	// and operator alike — reaches the process from the proxy's
 	// address and shares one rate-limit bucket. Both parties in
 	// these tests therefore use the same RemoteAddr.
@@ -115,11 +115,11 @@ func floodFailures(
 // done-criterion of https://git.eeqj.de/sneak/webhooker/issues/150.
 //
 // The attacker and the operator share one rate-limit bucket, because
-// behind the mandated reverse proxy with TRUSTED_PROXIES unset every
-// client keys on the proxy's address. The attacker floods the
-// operator's own username — a single-admin product has a predictable
-// one — far past the failure limit. The operator must still be able
-// to log in with the correct password.
+// behind the mandated reverse proxy, when TRUSTED_PROXIES does not
+// cover it, every client keys on the proxy's address. The attacker
+// floods the operator's own username — a single-admin product has a
+// predictable one — far past the failure limit. The operator must
+// still be able to log in with the correct password.
 //
 // This fails if credentials stop being verified ahead of the limiter.
 func TestLogin_StrangersFloodCannotLockOutTheOperator(t *testing.T) {

internal/middleware/loginguard.go

@@ -108,10 +108,10 @@ type failureWindow struct {
 //
 // A limiter that spends budget on arrival cannot protect a
 // single-admin product: behind the reverse proxy the deployment
-// requires, with TRUSTED_PROXIES unset, every client keys on the
-// proxy, so a stranger trickling five POSTs a minute keeps the one
-// bucket full and the operator's own correct password is answered 429
-// forever. There is no second administrative path.
+// requires, when TRUSTED_PROXIES does not cover it, every client
+// keys on the proxy, so a stranger trickling five POSTs a minute
+// keeps the one bucket full and the operator's own correct password
+// is answered 429 forever. There is no second administrative path.
 //
 // So budget is spent only by a FAILED verification. A correct
 // password is never throttled, whatever the counters say, which is

internal/middleware/ratelimit.go

@@ -123,9 +123,8 @@ func bucketKey(addr netip.Addr) string {
 	return prefix.String()
 }
 
-// isTrustedProxy reports whether addr belongs to a network the
-// operator listed in TRUSTED_PROXIES. The list is empty by default,
-// so by default nothing is trusted.
+// isTrustedProxy reports whether addr belongs to a network in
+// TRUSTED_PROXIES, which by default is the RFC 1918 private ranges.
 func (m *Middleware) isTrustedProxy(addr netip.Addr) bool {
 	for _, prefix := range m.params.Config.TrustedProxies {
 		if prefix.Contains(addr) {

internal/middleware/ratelimit_test.go

@@ -426,8 +426,8 @@ func assertSharedBucket(
 }
 
 // TestRateLimitKey_SpoofedForwardedFromUntrustedPeer is the test
-// this gating exists for: with no trusted proxies configured (the
-// default), a client that rotates a forwarded header on every
+// this gating exists for: from a peer that is not a trusted
+// proxy, a client that rotates a forwarded header on every
 // request must stay in one bucket. If forwarded headers were
 // trusted unconditionally, each spoofed value would mint a fresh
 // bucket and the limit would stop no one.

internal/server/routes.go

@@ -140,11 +140,12 @@ func (s *Server) setupPageRoutes() {
 		r.Use(s.mw.NoCache())
 
 		// The login POST carries no pre-emptive rate limiter. Behind
-		// the reverse proxy production requires, with TRUSTED_PROXIES
-		// unset, every client shares one bucket, so a limiter spent
-		// on arrival lets any stranger deny the operator the only
-		// administrative path. The handler verifies credentials first
-		// and charges only failures; see Handlers.authenticateUser.
+		// the reverse proxy production requires, when TRUSTED_PROXIES
+		// does not cover it, every client shares one bucket, so a
+		// limiter spent on arrival lets any stranger deny the operator
+		// the only administrative path. The handler verifies
+		// credentials first and charges only failures; see
+		// Handlers.authenticateUser.
 		r.Get("/login", s.h.HandleLoginPage())
 		r.Post("/login", s.h.HandleLoginSubmit())