Add an egress CIDR allowlist to the SSRF guard (closes #204)

The SSRF blocklist had no escape hatch, so the thing webhooker is
mostly for — taking a public webhook and forwarding it to something
on your own network — could not be configured at all. Every private
address, Docker sibling and loopback service was permanently
unreachable as a delivery destination.

ALLOWED_EGRESS_CIDRS (default empty) names blocks that delivery
targets may reach despite the default blocklist. It is an allowlist
and only ever adds destinations: there is no boolean, and no value
disables SSRF protection wholesale. Empty, it adds nothing and the
guard permits and refuses the same addresses it did before, save
the two spellings named below.

A small set of addresses is refused before the allowlist is
consulted, so no supplied CIDR opens one — not the exact address,
not a supernet, not 0.0.0.0/0 or ::/0. alwaysBlockedNetworks in
internal/delivery/ssrf.go is the authoritative list and states the
membership criterion in full; it is deliberately not copied here,
because a copy drifts out of date. In short: the provider fixes the
address, so a host route for it collides with nothing the operator
runs, and reaching it discloses credentials or user data. A
publicly routable address never qualifies however well it meets
both — nothing in this set can be reopened, so blocking one here
would leave the operator no escape hatch at all. Those belong in
blockedNetworks, which an allowlist can override.

Every entry is already inside the default blocklist, which is what
makes it unconditional rather than newly blocked, with two
exceptions that are the one behaviour change visible when the
allowlist is unset: ::a9fe:a9fe and 64:ff9b::a9fe:a9fe, the
IPv4-compatible and NAT64 spellings of 169.254.169.254, were
reachable before and are refused now. net.IPNet.Contains normalises
only the IPv4-mapped form via To4(), so 169.254.0.0/16 never
matched those two. The ten it does cover now report a metadata
error rather than the generic private-range one.

The policy now lives in one function, Guard.checkIP, which both
target-creation validation and the delivery dialer call. The two
paths previously decided separately, which is how they came to
disagree about a destination. The guard is built once from config
and injected via fx into both the handlers and the delivery engine,
so there is a single instance and a single answer.

A set-but-unparseable value aborts startup naming the variable,
reusing the existing envPrefixList parser. A non-empty list is
logged at startup with the blocks spelled out, not counted, so the
hole is visible in the log of any deployment that has one.

Tests: an allowlisted loopback CIDR both validates and delivers to a
live server (and the same URL still fails without the allowlist); a
private address outside the listed block stays refused on both
paths; every unconditionally blocked address stays refused on both
paths under an allowlist that covers it, and the set itself is
pinned entry by entry; public addresses are unaffected either way;
and config coverage for parsing, startup abort, and the warning's
contents.

internal/config/config.go

@@ -128,6 +128,22 @@ type Config struct {
 	// clients.
 	TrustedProxies []netip.Prefix
 
+	// AllowedEgressCIDRs is the set of networks a delivery target
+	// may reach even though the SSRF guard's default blocklist
+	// covers them. It is empty unless ALLOWED_EGRESS_CIDRS is set,
+	// and empty means every private/reserved range stays refused.
+	//
+	// This only ever adds destinations to what the guard would
+	// otherwise refuse. The guard itself is always on: there is no
+	// setting that disables SSRF protection, and delivery's
+	// alwaysBlockedNetworks stays blocked no matter what is listed
+	// here. That set is link-local plus the cloud metadata
+	// endpoints outside it that disclose credentials or user data
+	// at a provider-fixed address; it is not exhaustive of every
+	// cloud's metadata address. See alwaysBlockedNetworks for the
+	// authoritative list and the criterion it is built from.
+	AllowedEgressCIDRs []netip.Prefix
+
 	params *ConfigParams
 	log    *slog.Logger
 }
@@ -472,6 +488,11 @@ func loadFromEnv() (*Config, error) {
 		return nil, err
 	}
 
+	allowedEgressCIDRs, err := envPrefixList("ALLOWED_EGRESS_CIDRS")
+	if err != nil {
+		return nil, err
+	}
+
 	metricsUsername, metricsPassword, err := resolveMetricsAuth()
 	if err != nil {
 		return nil, err
@@ -490,9 +511,49 @@ func loadFromEnv() (*Config, error) {
 		SessionIdleTimeout:     sessionIdleTimeout,
 		ReceiverRateLimit:      receiverRateLimit,
 		TrustedProxies:         trustedProxies,
+		AllowedEgressCIDRs:     allowedEgressCIDRs,
 	}, nil
 }
 
+// PrefixStrings renders a prefix list as its CIDR strings, for
+// logging a list an operator has to be able to read back.
+func PrefixStrings(prefixes []netip.Prefix) []string {
+	out := make([]string, 0, len(prefixes))
+
+	for _, prefix := range prefixes {
+		out = append(out, prefix.String())
+	}
+
+	return out
+}
+
+// warnEgressAllowlist logs the effective ALLOWED_EGRESS_CIDRS
+// whenever it is non-empty.
+//
+// It prints the blocks themselves rather than a count, because
+// this is the one setting that lets a delivery target reach the
+// host's own network: an operator reading the startup log has to
+// be able to see exactly which hole is open. Silence means the
+// list is empty and the SSRF guard is refusing every
+// private/reserved range, which is the default.
+func (c *Config) warnEgressAllowlist(log *slog.Logger) {
+	if len(c.AllowedEgressCIDRs) == 0 {
+		return
+	}
+
+	log.Warn(
+		"ALLOWED_EGRESS_CIDRS lets delivery targets reach these "+
+			"otherwise-blocked private/reserved networks. Anyone "+
+			"who can create a delivery target can now make this "+
+			"process issue requests into them, and read back the "+
+			"response. Link-local and the known cloud instance "+
+			"metadata endpoints outside it stay blocked "+
+			"regardless of what is listed here.",
+		"allowedEgressCIDRs",
+		strings.Join(PrefixStrings(c.AllowedEgressCIDRs), ","),
+	)
+}
+
 // warnSharedRateLimitBucket logs a startup warning whenever
 // TRUSTED_PROXIES is empty, in any environment.
 //
@@ -574,11 +635,13 @@ func New(lc fx.Lifecycle, params ConfigParams) (*Config, error) {
 		"sessionIdleTimeout", s.SessionIdleTimeout.String(),
 		"receiverRateLimit", s.ReceiverRateLimit,
 		"trustedProxies", len(s.TrustedProxies),
+		"allowedEgressCIDRs", len(s.AllowedEgressCIDRs),
 		"hasSentryDSN", s.SentryDSN != "",
 		"hasMetricsAuth", s.MetricsAuthEnabled(),
 	)
 
 	s.warnSharedRateLimitBucket(log)
+	s.warnEgressAllowlist(log)
 
 	return s, nil
 }