Make snapshot list report a changed destination instead of advising prune (closes #317)

When the local index is bound to a different destination than the
configured one, snapshot list now gives the warning prune, snapshot
purge and snapshot remove refuse with: both destinations and the two
ways out (revert the configuration, or run vaultik database delete).
Below the table it replaces the local-only note and its prune advice.
With --json it goes to stderr through the logger, so stdout stays the
document, whose local rows show remote_present false.

Reading the binding moves out of EnsureStorageBinding into
storageBinding, which records nothing, so the read-only list can call
it without binding a fresh index.

Model: opus-5-5

README.md

@@ -323,7 +323,11 @@ read from the manifest.
 
 Snapshots in the local index with no counterpart on the destination
 store are reported below the table as drift, with the `vaultik prune`
-invocation that reconciles them.
+invocation that reconciles them. If the local index is bound to a
+different destination than the configured one (after a change to
+`storage_url`, or `s3.endpoint`, `s3.bucket` or `s3.prefix`), the
+command says so instead and gives the same two ways out that `prune`
+gives: revert the configuration, or run `vaultik database delete`.
 
 If the destination store cannot be listed (unmounted volume,
 permission denied, network down), the command warns, falls back to the
@@ -332,9 +336,11 @@ local index alone, and still exits zero.
   (whether the snapshot is in the local index), `remote_key` (the full
   64-character storage key), and `remote_present` (whether it was seen
   on the destination store, or `null` if the destination could not be
-  listed). Warnings about an unlistable destination, unreadable
+  listed). Warnings about an unlistable destination, a local index
-  manifests, and a truncated listing all go to stderr through the
+  bound to a different destination (with both destinations and the
-  logger, so stdout stays a single parseable document.
+  same two ways out), unreadable manifests, and a truncated listing all
+  go to stderr through the logger, so stdout stays a single parseable
+  document.
 
 **`snapshot verify`**: Verify snapshot integrity.
 * Default (shallow): checks that every blob the manifest lists is present in

internal/vaultik/snapshot_list.go

@@ -61,7 +61,9 @@ const tabPadding = 3
 // attempt is made to recover or fabricate the human ID.
 //
 // Snapshots in the local index with no counterpart on the destination
-// store are reported as drift below the table.
+// store are reported as drift below the table, unless the local index
+// is bound to a different destination than the configured one: that is
+// reported instead.
 //
 // If remote listing fails (unmounted volume, permission denied,
 // network), we degrade to local-only with a warning. List never fails
@@ -103,7 +105,26 @@ func (v *Vaultik) ListSnapshots(jsonOutput bool) error {
 		return snapshots[i].Timestamp.After(snapshots[j].Timestamp)
 	})
 
+	stored, configured, err := v.storageBinding()
+	if err != nil {
+		return err
+	}
+
+	// A local index bound to another destination describes that one, so
+	// its records are expected to be missing here, and prune refuses to
+	// run. The binding is reported instead of advising prune.
+	boundElsewhere := stored != "" && stored != configured
+
 	if jsonOutput {
+		// stdout holds only the document, so this goes to the logger.
+		if boundElsewhere {
+			log.Warn("Local index is bound to a different backup "+
+				"destination; to proceed, revert storage_url (or the s3.* "+
+				"endpoint, bucket and prefix) to the bound destination, "+
+				"or run 'vaultik database delete'",
+				"bound_to", stored, "configured", configured)
+		}
+
 		if remoteErr == nil {
 			v.reportJSONListingLimits(listing)
 		}
@@ -125,8 +146,13 @@ func (v *Vaultik) ListSnapshots(jsonOutput bool) error {
 		}
 	}
 
+	if boundElsewhere {
+		v.UI.Warningf("%v\n%s", errStorageBindingMismatch,
+			buildBindingMismatchMessage(stored, configured))
+	}
+
 	if remoteErr == nil {
-		v.reportListDrift(snapshots, listing)
+		v.reportListDrift(snapshots, listing, boundElsewhere)
 	}
 
 	return nil
@@ -432,7 +458,9 @@ func (v *Vaultik) snapshotInfoFromLocal(ls *database.Snapshot) SnapshotInfo {
 // reportListDrift prints the reconciliation notes the merged table
 // cannot express on its own: local records with no counterpart on the
 // destination store, plus counts of remote snapshots that were
-// unreadable or omitted.
+// unreadable or omitted. Local records are not reported when
+// boundElsewhere is set: ListSnapshots has already said why they are
+// missing.
 //
 // This is what remains of the old reportRemoteDrift, and it no longer
 // touches the destination store. Its remote-only half collapsed into
@@ -441,6 +469,7 @@ func (v *Vaultik) snapshotInfoFromLocal(ls *database.Snapshot) SnapshotInfo {
 // so `snapshot list` lists the destination exactly once per invocation.
 func (v *Vaultik) reportListDrift(
 	snapshots []SnapshotInfo, listing *remoteSnapshotListing,
+	boundElsewhere bool,
 ) {
 	var localOnly []string
 
@@ -450,7 +479,7 @@ func (v *Vaultik) reportListDrift(
 		}
 	}
 
-	if len(localOnly) > 0 {
+	if len(localOnly) > 0 && !boundElsewhere {
 		v.UI.Warningf("%d local snapshot record(s) not found in backup "+
 			"destination store:", len(localOnly))
 

internal/vaultik/snapshot_list_test.go

@@ -421,6 +421,74 @@ func TestListSnapshots_LocalOnlyReportedAsDrift(t *testing.T) {
 	assert.NotContains(t, out, "snapshot cleanup")
 }
 
+// TestListSnapshots_BoundElsewhereDoesNotAdvisePrune covers a changed
+// storage_url: the local index is still bound to the old destination,
+// so its records are missing from the new one. prune refuses to run in
+// that state, so the listing must give the choices prune gives instead
+// of advising it.
+func TestListSnapshots_BoundElsewhereDoesNotAdvisePrune(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	const (
+		oldURL = "file:///mnt/backups/old"
+		newURL = "file:///mnt/backups/new"
+	)
+
+	env := newListEnv(t)
+	env.v.Config.StorageURL = newURL
+	require.NoError(t, env.v.Repositories.LocalMeta.Set(context.Background(),
+		database.LocalMetaKeyStorageURL, oldURL))
+	env.addLocal(t, listLocalID, time.Date(2026, 3, 1, 10, 0, 0, 0, time.UTC))
+
+	err := env.v.ListSnapshots(false)
+	require.NoError(t, err)
+
+	out := env.stdout.String()
+
+	assert.Contains(t, out, listLocalID)
+	assert.Contains(t, out,
+		"local index is bound to a different backup destination")
+	assert.Contains(t, out, oldURL)
+	assert.Contains(t, out, newURL)
+	assert.Contains(t, out, "revert storage_url")
+	assert.Contains(t, out, "vaultik database delete")
+	assert.NotContains(t, out, "vaultik prune")
+}
+
+// TestListSnapshots_JSONReportsBoundElsewhere is the --json side of the
+// test above. Every local row comes out with remote_present false, which
+// a script reads as stale local records unless it is told, on stderr,
+// that the local index is bound to a different destination.
+//
+//nolint:paralleltest // captureProcessStderr replaces os.Stderr
+func TestListSnapshots_JSONReportsBoundElsewhere(t *testing.T) {
+	const (
+		oldURL = "file:///mnt/backups/old"
+		newURL = "file:///mnt/backups/new"
+	)
+
+	env := newListEnv(t)
+	env.v.Config.StorageURL = newURL
+	require.NoError(t, env.v.Repositories.LocalMeta.Set(context.Background(),
+		database.LocalMetaKeyStorageURL, oldURL))
+	env.addLocal(t, listLocalID, time.Date(2026, 3, 1, 10, 0, 0, 0, time.UTC))
+
+	stderr := captureProcessStderr(t, func() {
+		require.NoError(t, env.v.ListSnapshots(true))
+	})
+
+	rows := decodeListJSON(t, env.stdout.String())
+	require.Len(t, rows, 1)
+	assert.Equal(t, listLocalID, rows[0].ID)
+
+	assert.Contains(t, stderr, "bound to a different backup destination")
+	assert.Contains(t, stderr, oldURL)
+	assert.Contains(t, stderr, newURL)
+	assert.Contains(t, stderr, "revert storage_url")
+	assert.Contains(t, stderr, "vaultik database delete")
+}
+
 // TestListSnapshots_UnreachableRemoteDegrades covers the promise in the
 // doc comment: an unreachable destination is a warning plus local-only
 // output, never a failure.

internal/vaultik/storage_bind.go

@@ -45,17 +45,9 @@ func (v *Vaultik) EnsureStorageBinding() error {
 		return nil
 	}
 
-	configured := v.Config.StorageURL
+	stored, configured, err := v.storageBinding()
-	if configured == "" {
-		// The s3.* form: bind on its endpoint, bucket and prefix,
-		// written the way storage_url would name the same destination.
-		s3 := v.Config.S3
-		configured = "s3://" + s3.Bucket + "/" + s3.Prefix + "?endpoint=" + s3.Endpoint
-	}
-
-	stored, err := v.Repositories.LocalMeta.Get(v.ctx, database.LocalMetaKeyStorageURL)
 	if err != nil {
-		return fmt.Errorf("reading local storage binding: %w", err)
+		return err
 	}
 
 	if stored == "" {
@@ -78,6 +70,27 @@ func (v *Vaultik) EnsureStorageBinding() error {
 		errStorageBindingMismatch, buildBindingMismatchMessage(stored, configured))
 }
 
+// storageBinding returns the destination the local index is bound to
+// ("" when no binding is recorded yet), then the configured destination
+// written the same way. It records nothing, so a read-only command can
+// call it.
+func (v *Vaultik) storageBinding() (string, string, error) {
+	configured := v.Config.StorageURL
+	if configured == "" {
+		// The s3.* form: bind on its endpoint, bucket and prefix,
+		// written the way storage_url would name the same destination.
+		s3 := v.Config.S3
+		configured = "s3://" + s3.Bucket + "/" + s3.Prefix + "?endpoint=" + s3.Endpoint
+	}
+
+	stored, err := v.Repositories.LocalMeta.Get(v.ctx, database.LocalMetaKeyStorageURL)
+	if err != nil {
+		return "", "", fmt.Errorf("reading local storage binding: %w", err)
+	}
+
+	return stored, configured, nil
+}
+
 // buildBindingMismatchMessage assembles the multi-line explanation
 // shown when the local index is bound to a different destination than
 // the currently-configured one (the first line lives in the