Stop a backup on a symlink whose target cannot be read (closes #269)

When readlink failed, the scanner logged at debug level and left the
symlink out of the snapshot, and the run reported success even without
--skip-errors. The error now goes through the same handling as any
other entry the walk cannot read: the run aborts, or with --skip-errors
the symlink is skipped with the usual "Failed to access" error line.

A symlink removed between the walk's lstat and the readlink also
aborts the run, as an entry that vanishes during the walk already does.

Model: opus-5-5

README.md

@@ -286,15 +286,13 @@ needed.
   remove orphaned blobs from remote storage. By default keeps only the latest
   snapshot per name; use `--keep-newer-than` for a rolling window.
 * `--keep-newer-than <duration>`: With `--prune`, keep snapshots newer than
-  this duration instead of only the latest (e.g. `4w`, `30d`, `6mo`, `1y`).
+  this duration instead of only the latest (e.g. `4w`, `30d`, `6mo`, `1y`)
-  Without `--prune`, or with a value that is not a valid duration, the
-  command fails before the backup starts.
 
 **`snapshot list`**: Show every snapshot known to this host — the union
 of the local index and the backup destination store — with timestamps
 and three sizes per snapshot (compressed remote size; total
-uncompressed chunk size; size of the chunks that snapshot stored that
+uncompressed chunk size; size of chunks newly referenced by that
-were not stored before, recorded when its backup ran).
+snapshot).
 
 Listing the destination store does **not** require the age secret key,
 so it works in vaultik's intended configuration, where the backed-up
@@ -307,8 +305,8 @@ only the hash, so hostname and snapshot name exist solely in the local
 index and in the encrypted per-snapshot database. Snapshots found only
 on the destination store are therefore listed as
 `<remote only:<abbreviated remote key>>` and show `<remote only>` in
-the uncompressed and "new chunk" columns, which come only from the
+the uncompressed and "new chunk" columns, which can only be computed
-local index. Their timestamp and compressed size are real,
+from the local index. Their timestamp and compressed size are real,
 read from the manifest.
 
 Snapshots in the local index with no counterpart on the destination
@@ -351,11 +349,9 @@ the backup destination store. Blobs are NOT touched — deleting blobs
 requires reading every remaining remote manifest (the destination store
 may hold snapshots this host doesn't know about), which is what
 `vaultik prune` does. On success the command prints the exact `vaultik
-prune` invocation to run as a follow-up. An ID that names no snapshot in
+prune` invocation to run as a follow-up. Local row cleanup (files,
-the local index or on the destination store is an error; with
+chunks, blobs the snapshot was the last referrer for) runs
-`--local-only`, the snapshot must be in the local index. Local row
+automatically. If the destination store is unreachable, the local-DB
-cleanup (files, chunks, blobs the snapshot was the last referrer for)
-runs automatically. If the destination store is unreachable, the local-DB
 removal still completes and a warning is emitted; run `vaultik snapshot
 remove <snapshot-id>` again once the store is reachable to remove the
 snapshot's metadata from it (`vaultik prune` does not). To wipe everything
@@ -363,8 +359,7 @@ on the destination in one go, use `vaultik remote nuke --force`.
 * `--local-only`: Skip remote cleanup; only touch the local index
 * `--dry-run`: Show what would be deleted without deleting
 * `--force`: Skip confirmation prompt
-* `--json`: Output result as JSON. Also skips the confirmation prompt, as
+* `--json`: Output result as JSON
-  `--force` does.
 
 **`snapshot restore`**: Restore files from a backup snapshot.
 * Requires `VAULTIK_AGE_SECRET_KEY` environment variable
@@ -375,9 +370,7 @@ on the destination in one go, use `vaultik remote nuke --force`.
 * Optional path arguments to restore specific files/directories (default: all)
 * Preserves file permissions, timestamps, ownership (ownership requires root),
   symlinks, and empty directories
-* `--verify`: After restoring, verify every restored file's chunk hashes
+* `--verify`: After restoring, verify every file's chunk hashes match
-  match. A file skipped under `--skip-errors` is reported as failed to
-  restore and is not verified.
 
 **`prune`**: Tidy up everything that isn't needed. Runs three passes:
 (1) reconcile the local index against the destination store — any
@@ -390,8 +383,7 @@ manifests — network cost scales with the number of snapshots. `snapshot
 create --prune` runs the same cleanup automatically; this is the
 manual entry point for the same work.
 * `--force`: Skip confirmation prompt
-* `--json`: Output stats as JSON. Also skips the confirmation prompt, as
+* `--json`: Output stats as JSON
-  `--force` does.
 
 **`info`**: Display system configuration, storage settings, encryption
 recipients, and local database statistics.
@@ -404,10 +396,7 @@ key is skipped with a warning and is not printed. If a listed
 orphaned blob figures are reported as unknown; `--json` gives them as
 `null`, lists the remote key of each unreadable manifest in
 `unreadable_manifests` and counts the manifests under skipped names in
-`skipped_manifest_count`. An unreadable manifest also leaves its
+`skipped_manifest_count`.
-snapshot's blob count and blob size unknown, `null` in `--json`. A file
-under `blobs/` whose name is not a blob hash is not counted as a blob,
-since `prune` never deletes it.
 * `--json`: Output as JSON
 
 **`remote nuke`**: Delete every snapshot's metadata and every blob from the
@@ -420,8 +409,7 @@ destination store.
 entirely. Remote storage is unaffected; the next backup will do a full
 scan and re-deduplicate against existing remote blobs, and the local
 index will re-bind to the currently configured storage destination.
-Use this after changing `storage_url`, or `s3.endpoint`, `s3.bucket` or
+Use this after changing `storage_url` to a different destination.
-`s3.prefix`, to a different destination.
 * `--force`: Skip confirmation prompt
 
 ---
@@ -435,10 +423,7 @@ object store. Credentials are read from `s3.access_key_id` and
 `s3.secret_access_key` in the config file.
 
 **Local filesystem** (`file:///path/to/backup`): Stores blobs and metadata on
-a local or mounted filesystem. Useful for testing or backing up to a NAS. The
+a local or mounted filesystem. Useful for testing or backing up to a NAS.
-path must be absolute; a relative one is refused when the config loads.
-Percent-escapes in the path are decoded, so `my%20stick` and `my stick` name
-the same directory.
 
 **Rclone** (`rclone://remote/path`): Uses rclone's 70+ supported cloud
 providers. Requires rclone to be configured separately (`rclone config`).

TODO.md

@@ -22,112 +22,6 @@ the tag exists and is exercised; what is left is merging `next` to
 
 # Completed Steps
 
-- 2026-10-13: Stopped `remote info` counting a file under `blobs/` that
-  is not a blob as an orphaned blob
-  ([issue #295](https://git.eeqj.de/sneak/vaultik/issues/295)). A stray
-  file such as `.DS_Store` was reported as an orphaned blob and the
-  report advised running `prune`, which skips such a file and deleted
-  nothing. `remote info` now takes its blob list from the same listing
-  `prune` uses, in the table and in `--json`.
-
-- 2026-10-13: Made `snapshot remove` fail for a snapshot that does not
-  exist ([issue #293](https://git.eeqj.de/sneak/vaultik/issues/293)).
-  The command never checked the ID: it reported the snapshot removed
-  from the local database and from the destination store and exited 0,
-  under `--json`, `--dry-run` and `--local-only` too. An ID that names
-  no snapshot in the local index or on the destination store is now an
-  error; with `--local-only`, the snapshot must be in the local index.
-  The command now reports a removal from either side only when one
-  happened, and `remote_removed` is true only when metadata was deleted.
-
-- 2026-10-12: Bound the local index to the destination an `s3.*` config
-  names ([issue #298](https://git.eeqj.de/sneak/vaultik/issues/298)).
-  Only `storage_url` was checked, so after `s3.bucket` or `s3.prefix`
-  changed, the next backup treated every chunk as already stored,
-  uploaded nothing, and completed a snapshot that could not be restored.
-  Without `storage_url`, the local index is now bound to `s3.endpoint`,
-  `s3.bucket` and `s3.prefix`, and a change is refused as a changed
-  `storage_url` is.
-
-- 2026-10-12: Rejected a retention duration longer than about 292 years
-  ([issue #289](https://git.eeqj.de/sneak/vaultik/issues/289)). The
-  number given to `--older-than` or `--keep-newer-than` was multiplied
-  by the length of its unit with no limit, so from `293y`, `15251w`,
-  `3559mo` or `106752d`, or a sum of parts such as `200y200y`, the
-  result wrapped to a negative duration. The cutoff then lay in the
-  future, every snapshot of the name was deleted, the one just made
-  included, and the command exited 0. Such a duration is now rejected
-  as invalid and nothing is deleted.
-
-- 2026-10-08: Made a backup cancelled under `--skip-errors` stop at once
-  ([issue #286](https://git.eeqj.de/sneak/vaultik/issues/286)). After
-  Ctrl-C or SIGTERM, phase 2 treated the cancellation error from each
-  remaining file like an unreadable file: it opened the file, printed an
-  error line for it, counted it as failed and went on to the next one.
-  The run now stops at the first file after the cancellation, and no
-  file is counted as failed because of it.
-
-- 2026-10-08: Made `remote nuke` delete the `.partial` files that
-  uploads cut off part-way leave on the destination store
-  ([issue #281](https://git.eeqj.de/sneak/vaultik/issues/281)). The
-  file and rclone listings skip such a file, so the command left it in
-  place and still reported the store empty. It now removes them under
-  `metadata/` and `blobs/` as its last step.
-
-- 2026-10-08: Made a local index error while recording a directory or
-  symlink stop a backup under `--skip-errors`
-  ([issue #284](https://git.eeqj.de/sneak/vaultik/issues/284)). Phase 2
-  only records such an entry in the local index, since it has no data
-  to open or read, but an error doing so was skipped like an unreadable
-  file. The snapshot then completed without the entry, and a restore
-  did not recreate it. The error now stops the backup, as it does
-  without the flag.
-
-- 2026-10-08: Counted a file that a backup could not store as failed
-  ([issue #280](https://git.eeqj.de/sneak/vaultik/issues/280)). A file
-  that phase 1 counted and phase 2 could not open, because it was
-  unreadable under `--skip-errors` or removed in between, was reported
-  in the summary as unchanged with its bytes as backed up, and the
-  `snapshots` row's `file_count` and `total_size` included it. The
-  summary now counts it as failed, and its data total and the row leave
-  it out.
-
-- 2026-10-08: Made `remote info` report a snapshot's blob count and
-  blob size as unknown when its manifest cannot be read
-  ([issue #272](https://git.eeqj.de/sneak/vaultik/issues/272)). The
-  orphan figures were already unknown in that case, but the snapshot's
-  row still gave 0 blobs and 0 B, in the table and in `--json`. The row
-  now reads `unknown` and `--json` gives `null`. A directory with no
-  manifest still shows 0, since the orphan figures count its blobs as
-  orphaned.
-
-- 2026-10-08: Kept the progress line of a snapshot with more than one
-  path within 100%
-  ([issue #271](https://git.eeqj.de/sneak/vaultik/issues/271)). The
-  bytes and files processed counted every path, but the totals they
-  were divided by held only the current path's, so a second path
-  smaller than the first showed more than 100% and an ETA of `unknown`.
-  The totals now add up over the paths scanned so far. The rate behind
-  the ETA restarts when each path's scan phase ends, so that phase does
-  not lower the rate while the path is processed; until then the rate
-  is the previous path's.
-
-- 2026-10-08: Made a second `snapshot create` of one name succeed when
-  it starts in the same second as the first
-  ([issue #270](https://git.eeqj.de/sneak/vaultik/issues/270)). The
-  timestamp in a snapshot ID is in whole seconds, so the second run got
-  the first run's ID and failed with `UNIQUE constraint failed:
-  snapshots.id`. When the local index already has a snapshot with the
-  ID, the create now waits a second and takes a new timestamp.
-
-- 2026-10-07: Documented that `--json` skips the confirmation prompt of
-  `snapshot remove` and `prune`
-  ([issue #268](https://git.eeqj.de/sneak/vaultik/issues/268)). Both
-  commands delete without asking under `--json`, since a prompt on stdout
-  would break the JSON document, but the help and the README described
-  only `--force` as skipping it. The `--json` help of both commands and
-  their README entries now say so.
-
 - 2026-10-07: Made a symlink whose target cannot be read stop the backup
   ([issue #269](https://git.eeqj.de/sneak/vaultik/issues/269)). It was
   left out of the snapshot with only a debug log line, even without

docs/DATAMODEL.md

@@ -119,7 +119,6 @@ Tracks backup snapshots.
 - `completed_at` (INTEGER) - Completion timestamp (NULL if in progress)
 - `file_count` (INTEGER) - Number of files in snapshot
 - `chunk_count` (INTEGER) - Number of chunks this snapshot stored that were not stored before
-- `new_chunk_size` (INTEGER) - Total size of those chunks before compression; `snapshot list` shows it as NEW CHUNK SIZE
 - `blob_count` (INTEGER) - Number of blobs this snapshot created
 - `total_size` (INTEGER) - Total size of all files
 - `blob_size` (INTEGER) - Total compressed size of all referenced blobs

internal/blob/packer.go

@@ -245,17 +245,6 @@ func (p *Packer) Flush(ctx context.Context) error {
 	return nil
 }
 
-// DiscardCurrentBlob closes and removes the temp file of the blob being
-// packed, if any, and drops that blob. A caller that stops before Flush
-// must call it, or the temp file is left behind. Thread-safe.
-func (p *Packer) DiscardCurrentBlob() {
-	p.mu.Lock()
-	defer p.mu.Unlock()
-
-	p.cleanupTempFile()
-	p.currentBlob = nil
-}
-
 // FinalizeBlob finalizes the current blob being assembled.
 // This compresses the accumulated chunks, encrypts the result, and computes
 // the content-addressed hash. The finalized blob is either passed to the

internal/cli/config.go

@@ -251,12 +251,6 @@ func NewConfigCommand() *cobra.Command {
 		Use:   "config",
 		Short: "Manage the configuration file",
 		Long:  "Commands for creating, editing, and querying the vaultik config file.",
-		// cobra checks Args only on a command that has a Run: without
-		// one, a mistyped subcommand printed help and exited 0.
-		Args: cobra.NoArgs,
-		Run: func(cmd *cobra.Command, _ []string) {
-			_ = cmd.Help()
-		},
 	}
 
 	cmd.AddCommand(newConfigInitCommand())

internal/cli/database.go

@@ -15,12 +15,6 @@ func NewDatabaseCommand() *cobra.Command {
 		Use:   "database",
 		Short: "Manage the local state database",
 		Long:  `Commands for managing the local SQLite state database.`,
-		// cobra checks Args only on a command that has a Run: without
-		// one, a mistyped subcommand printed help and exited 0.
-		Args: cobra.NoArgs,
-		Run: func(cmd *cobra.Command, _ []string) {
-			_ = cmd.Help()
-		},
 	}
 
 	cmd.AddCommand(

internal/cli/entry_snapshot_create_prune_test.go

@@ -1,108 +0,0 @@
-package cli //nolint:testpackage // shares runEntry and the hermetic config helpers
-
-import (
-	"os"
-	"path/filepath"
-	"strings"
-	"testing"
-
-	"github.com/stretchr/testify/assert"
-	"github.com/stretchr/testify/require"
-)
-
-// Flags of `snapshot create` used to build argument vectors below.
-const (
-	flagPrune         = "--prune"
-	flagKeepNewerThan = "--keep-newer-than"
-)
-
-// TestEntrySnapshotCreateRejectsKeepNewerThanBeforeBackup checks that a
-// --keep-newer-than the post-backup prune could not use stops `snapshot
-// create` before the backup: the command fails and the destination
-// store stays empty. It used to be read only by the prune, after the
-// snapshot was uploaded, and without --prune it was ignored.
-//
-//nolint:paralleltest // replaces os.Args, os.Stdout, os.Stderr and the xdg globals
-func TestEntrySnapshotCreateRejectsKeepNewerThanBeforeBackup(t *testing.T) {
-	for _, testCase := range []struct {
-		name string
-		args []string
-	}{
-		{
-			name: "decimal in a day count",
-			args: []string{flagPrune, flagKeepNewerThan, "1.5d"},
-		},
-		{
-			name: "unknown unit",
-			args: []string{flagPrune, flagKeepNewerThan, "4x"},
-		},
-		{
-			name: "without --prune",
-			args: []string{flagKeepNewerThan, "4w"},
-		},
-	} {
-		t.Run(testCase.name, func(t *testing.T) {
-			configPath, storeDir := writeBackupConfig(t)
-
-			code, _, _ := runEntry(t, append(
-				[]string{flagConfig, configPath, cmdSnapshot, cmdCreate},
-				testCase.args...)...)
-
-			assert.Equal(t, 1, code)
-
-			stored, err := os.ReadDir(storeDir)
-			require.NoError(t, err)
-			assert.Empty(t, stored, "nothing may be uploaded")
-		})
-	}
-}
-
-// TestEntrySnapshotCreateReportsPostBackupPruneFailure makes the
-// post-backup prune fail after a good backup, by planting a manifest
-// that cannot be decoded, and checks that the failure is reported as the
-// prune's and not as a failed snapshot creation.
-//
-//nolint:paralleltest // replaces os.Args, os.Stdout, os.Stderr and the xdg globals
-func TestEntrySnapshotCreateReportsPostBackupPruneFailure(t *testing.T) {
-	configPath, storeDir := writeBackupConfig(t)
-
-	// A remote key is 64 lowercase hex characters. The prune reads every
-	// manifest on the store and fails on one it cannot decode.
-	plantedDir := filepath.Join(storeDir, "metadata", strings.Repeat("a", 64))
-	require.NoError(t, os.MkdirAll(plantedDir, 0o750))
-	require.NoError(t, os.WriteFile(
-		filepath.Join(plantedDir, "manifest.json.zst"),
-		[]byte("not a valid manifest"), 0o600))
-
-	code, _, stderr := runEntry(t,
-		flagConfig, configPath, cmdSnapshot, cmdCreate, flagPrune)
-
-	assert.Equal(t, 1, code)
-	assert.Contains(t, stderr, "Backup completed, but post-backup prune failed")
-	assert.NotContains(t, stderr, "Snapshot creation failed")
-
-	snapshots, err := os.ReadDir(filepath.Join(storeDir, "metadata"))
-	require.NoError(t, err)
-	assert.Len(t, snapshots, 2,
-		"the new snapshot is on the store beside the planted one")
-}
-
-// writeBackupConfig builds a hermetic config with one small file in its
-// source directory and an empty destination store directory. Returns the
-// config path and the store directory.
-func writeBackupConfig(t *testing.T) (string, string) {
-	t.Helper()
-
-	configPath := writeHermeticPruneConfig(t, false)
-
-	// writeHermeticPruneConfig puts the source and store directories
-	// beside the config file.
-	dir := filepath.Dir(configPath)
-	sourceDir := filepath.Join(dir, "source")
-
-	require.NoError(t, os.Mkdir(sourceDir, 0o750))
-	require.NoError(t, os.WriteFile(
-		filepath.Join(sourceDir, "file.txt"), []byte("hello"), 0o600))
-
-	return configPath, filepath.Join(dir, "store")
-}

internal/cli/entry_unknown_subcommand_test.go

@@ -1,43 +0,0 @@
-package cli //nolint:testpackage // shares runEntry and the command-word constants
-
-import (
-	"testing"
-
-	"github.com/stretchr/testify/assert"
-)
-
-// TestEntryGroupRejectsUnknownSubcommand runs each group command with a
-// mistyped subcommand, as a crontab line might carry one. It must fail
-// with exit 1 and name the word, as `vaultik bogus` does at the top
-// level, instead of printing the group's help and exiting 0 having done
-// nothing. The group name alone still prints its help.
-//
-//nolint:paralleltest // replaces os.Args, os.Stdout and os.Stderr
-func TestEntryGroupRejectsUnknownSubcommand(t *testing.T) {
-	for _, testCase := range []struct {
-		group    string
-		mistyped string
-	}{
-		{group: cmdSnapshot, mistyped: "craete"},
-		{group: "config", mistyped: "inti"},
-		{group: cmdRemote, mistyped: "ifno"},
-		{group: "database", mistyped: "delte"},
-		{group: "completion", mistyped: "nosuchshell"},
-	} {
-		t.Run(testCase.group, func(t *testing.T) {
-			code, stdout, stderr := runEntry(t,
-				testCase.group, testCase.mistyped)
-
-			assert.Equal(t, 1, code)
-			assert.Empty(t, stdout)
-			assert.Contains(t, stderr,
-				`unknown command "`+testCase.mistyped+`"`)
-
-			code, stdout, _ = runEntry(t, testCase.group)
-
-			assert.Equal(t, 0, code)
-			assert.Contains(t, stdout,
-				programName+" "+testCase.group+" [command]")
-		})
-	}
-}

internal/cli/json_help_test.go

@@ -1,24 +0,0 @@
-package cli //nolint:testpackage // exercises the unexported command constructor
-
-import (
-	"testing"
-
-	"github.com/spf13/cobra"
-	"github.com/stretchr/testify/assert"
-)
-
-// TestJSONHelpSaysConfirmationPromptIsSkipped checks that the --json help
-// of `snapshot remove` and `prune` says the flag skips the confirmation
-// prompt. Both delete without asking under --json, since a prompt on
-// stdout would break the JSON document.
-func TestJSONHelpSaysConfirmationPromptIsSkipped(t *testing.T) {
-	t.Parallel()
-
-	for _, cmd := range []*cobra.Command{
-		newSnapshotRemoveCommand(),
-		NewPruneCommand(),
-	} {
-		assert.Contains(t, cmd.Flags().Lookup("json").Usage,
-			"skips the confirmation prompt", cmd.Name())
-	}
-}

internal/cli/prune.go

@@ -57,8 +57,7 @@ referenced.`,
 	}
 
 	cmd.Flags().BoolVar(&opts.Force, "force", false, "Skip confirmation prompt")
-	cmd.Flags().BoolVar(&opts.JSON, "json", false,
+	cmd.Flags().BoolVar(&opts.JSON, "json", false, "Output pruning stats as JSON")
-		"Output pruning stats as JSON; skips the confirmation prompt, as --force does")
 
 	return cmd
 }

internal/cli/remote.go

@@ -18,12 +18,6 @@ func NewRemoteCommand() *cobra.Command {
 		Use:   "remote",
 		Short: "Remote storage management commands",
 		Long:  "Commands for inspecting and managing remote storage",
-		// cobra checks Args only on a command that has a Run: without
-		// one, a mistyped subcommand printed help and exited 0.
-		Args: cobra.NoArgs,
-		Run: func(cmd *cobra.Command, _ []string) {
-			_ = cmd.Help()
-		},
 	}
 
 	// Add subcommands

internal/cli/root.go

@@ -74,21 +74,6 @@ on the source system.`,
 		NewDatabaseCommand(),
 	)
 
-	// cobra adds the completion command only when Execute runs, and with
-	// no Run, so it skipped its own cobra.NoArgs and a mistyped shell name
-	// printed help and exited 0. Adding it here lets it have a Run. Its
-	// scripts go to os.Stdout as it is now: a later SetOut does not
-	// redirect them.
-	cmd.InitDefaultCompletionCmd()
-
-	for _, sub := range cmd.Commands() {
-		if sub.Name() == "completion" {
-			sub.Run = func(completion *cobra.Command, _ []string) {
-				_ = completion.Help()
-			}
-		}
-	}
-
 	return cmd
 }
 

internal/cli/snapshot.go

@@ -41,12 +41,6 @@ func NewSnapshotCommand() *cobra.Command {
 		Use:   "snapshot",
 		Short: "Snapshot management commands",
 		Long:  "Commands for creating, listing, and managing snapshots",
-		// cobra checks Args only on a command that has a Run: without
-		// one, a mistyped subcommand printed help and exited 0.
-		Args: cobra.NoArgs,
-		Run: func(cmd *cobra.Command, _ []string) {
-			_ = cmd.Help()
-		},
 	}
 
 	// Add subcommands
@@ -77,11 +71,6 @@ otherwise from the platform config directory (~/.config/vaultik/config.yml
 on Linux), then /etc/vaultik/config.yml.`,
 		Args: cobra.ArbitraryArgs,
 		RunE: func(cmd *cobra.Command, args []string) error {
-			err := opts.Validate()
-			if err != nil {
-				return err
-			}
-
 			// Pass snapshot names from args
 			opts.Snapshots = args
 			// --skip-errors is a global flag on the root command.
@@ -108,13 +97,6 @@ on Linux), then /etc/vaultik/config.yml.`,
 			}, func(v *vaultik.Vaultik) error {
 				return v.CreateSnapshot(opts)
 			}, func(err error) {
-				if errors.Is(err, vaultik.ErrPostBackupPruneFailed) {
-					log.Error("Post-backup prune failed", "error", err)
-					ReportErrorf("Backup completed, but %v", err)
-
-					return
-				}
-
 				log.Error("Snapshot creation failed", "error", err)
 				ReportErrorf("Snapshot creation failed: %v", err)
 			})
@@ -273,12 +255,8 @@ manifest (the destination store may hold snapshots this host doesn't
 know about), which is what 'vaultik prune' does. On success the command
 prints the exact 'vaultik prune' invocation to run as a follow-up.
 
-An ID that names no snapshot in the local index or on the destination
-store is an error.
-
 Use --local-only to skip the remote half (e.g. when you want to forget a
-snapshot locally without touching the destination store); the snapshot
+snapshot locally without touching the destination store).
-must then be in the local index.
 
 If the remote is unreachable, the local-database removal still completes
 and a warning is emitted; run 'vaultik snapshot remove <snapshot-id>' again
@@ -302,8 +280,7 @@ nuke --force' — it is the single supported entry point for that.`,
 	cmd.Flags().BoolVarP(&opts.Force, "force", "f", false, "Skip confirmation prompt")
 	cmd.Flags().BoolVar(&opts.DryRun, "dry-run", false,
 		"Show what would be removed without removing")
-	cmd.Flags().BoolVar(&opts.JSON, "json", false,
+	cmd.Flags().BoolVar(&opts.JSON, "json", false, "Output result as JSON")
-		"Output result as JSON; skips the confirmation prompt, as --force does")
 	cmd.Flags().BoolVar(&opts.LocalOnly, "local-only", false,
 		"Skip remote cleanup; only touch the local index")
 

internal/config/config.go

@@ -61,9 +61,6 @@ var (
 	errBadS3PartSize    = errors.New("s3.part_size must be between 5MiB and 5GiB")
 	errBadStorageScheme = errors.New(
 		"storage_url must start with s3://, file://, or rclone://")
-	errFileURLNotAbsolute = errors.New(
-		"a file:// storage_url needs an absolute path, " +
-			"as in file:///path/to/backup")
 	errStorageNotConfigured = errors.New(
 		"storage not configured; set storage_url or provide s3.endpoint + " +
 			"s3.bucket + credentials")
@@ -464,18 +461,11 @@ func (c *Config) validateStorage() error {
 
 // validateStorageURL validates URL-based storage configuration. File and
 // rclone URLs need no credentials; S3 URLs require the legacy s3.*
-// credential fields. A file URL must name an absolute path: a relative one
+// credential fields.
-// would resolve against the working directory, so the destination would
-// move with it.
 func (c *Config) validateStorageURL() error {
 	switch {
 	case strings.HasPrefix(c.StorageURL, "file://"):
-		// storage.ParseStorageURL applies the same rule, but config
+		// File storage doesn't need S3 credentials
-		// cannot import storage, which imports config.
-		if !strings.HasPrefix(c.StorageURL, "file:///") {
-			return errFileURLNotAbsolute
-		}
-
 		return nil
 	case strings.HasPrefix(c.StorageURL, "rclone://"):
 		// Rclone storage uses rclone's own config

internal/config/config_test.go

@@ -337,35 +337,6 @@ func TestLoadS3PartSize(t *testing.T) {
 	})
 }
 
-// TestLoadRejectsRelativeFileURL checks that a file:// storage_url with a
-// relative path fails at load. Accepted, it would resolve against the
-// working directory, so a backup run from another directory would write
-// to a different destination and still succeed.
-func TestLoadRejectsRelativeFileURL(t *testing.T) {
-	t.Parallel()
-
-	const relativeConfig = "snapshots:\n" +
-		"  test:\n" +
-		"    paths: [/tmp/vaultik-test-source]\n" +
-		"storage_url: file://dest\n"
-
-	path := filepath.Join(t.TempDir(), "config.yml")
-
-	err := os.WriteFile(path, []byte(relativeConfig), 0o600)
-	if err != nil {
-		t.Fatalf("write config: %v", err)
-	}
-
-	_, err = Load(path)
-	if !errors.Is(err, errFileURLNotAbsolute) {
-		t.Fatalf("Load() error = %v, want errFileURLNotAbsolute", err)
-	}
-
-	if !strings.Contains(err.Error(), "absolute path") {
-		t.Errorf("error %q does not say to use an absolute path", err.Error())
-	}
-}
-
 // TestValidateAgeRecipients checks that recipients are parsed at config load
 // (a bad entry fails immediately, not mid-backup) and that no invalid entry —
 // least of all a pasted secret key — is echoed in the error. An empty list

internal/database/repositories.go

@@ -3,7 +3,6 @@ package database
 import (
 	"context"
 	"database/sql"
-	"errors"
 	"fmt"
 )
 
@@ -61,24 +60,22 @@ func (r *Repositories) WithTx(ctx context.Context, fn TxFunc) error {
 
 	defer func() {
 		if p := recover(); p != nil {
-			// The panic is the failure to report, so a rollback error
+			rollbackErr := tx.Rollback()
-			// is dropped.
+			if rollbackErr != nil {
-			_ = tx.Rollback()
+				Fatalf("failed to rollback transaction: %v", rollbackErr)
+			}
 
 			panic(p)
+		} else if err != nil {
+			rollbackErr := tx.Rollback()
+			if rollbackErr != nil {
+				Fatalf("failed to rollback transaction: %v", rollbackErr)
+			}
 		}
 	}()
 
 	err = fn(ctx, tx)
 	if err != nil {
-		// Once ctx is cancelled, database/sql rolls the transaction
-		// back itself and Rollback returns sql.ErrTxDone.
-		rollbackErr := tx.Rollback()
-		if rollbackErr != nil && !errors.Is(rollbackErr, sql.ErrTxDone) {
-			return fmt.Errorf("%w; rolling back transaction: %w",
-				err, rollbackErr)
-		}
-
 		return err
 	}
 

internal/database/repositories_test.go

@@ -4,7 +4,6 @@ import (
 	"context"
 	"database/sql"
 	"errors"
-	"strings"
 	"testing"
 	"time"
 
@@ -236,125 +235,6 @@ func TestRepositoriesTransactionRollback(t *testing.T) {
 	}
 }
 
-// When the context is cancelled during the body, database/sql rolls the
-// transaction back itself, so WithTx's own rollback finds it already
-// done. WithTx must return the body's error alone, without that rollback.
-func TestRepositoriesTransactionContextCancelled(t *testing.T) {
-	t.Parallel()
-
-	db, cleanup := setupTestDB(t)
-	defer cleanup()
-
-	ctx, cancel := context.WithCancel(context.Background())
-	defer cancel()
-
-	repos := database.NewRepositories(db)
-
-	err := repos.WithTx(ctx, func(ctx context.Context, tx *sql.Tx) error {
-		file := &database.File{
-			Path:  "/test/cancelled_file.txt",
-			MTime: time.Now().Truncate(time.Second),
-			Size:  1024,
-			Mode:  0644,
-			UID:   1000,
-			GID:   1000,
-		}
-
-		err := repos.Files.Create(ctx, tx, file)
-		if err != nil {
-			return err
-		}
-
-		cancel()
-
-		// database/sql rolls back from a goroutine of its own; wait
-		// until it has, so the test does not depend on that race.
-		for {
-			_, err = tx.ExecContext(context.WithoutCancel(ctx), "SELECT 1")
-			if errors.Is(err, sql.ErrTxDone) {
-				return ctx.Err()
-			}
-
-			time.Sleep(time.Millisecond)
-		}
-	})
-	if !errors.Is(err, context.Canceled) {
-		t.Fatalf("expected context.Canceled, got: %v", err)
-	}
-
-	if errors.Is(err, sql.ErrTxDone) {
-		t.Fatalf("the already-done rollback was reported: %v", err)
-	}
-
-	file, err := repos.Files.GetByPath(
-		context.Background(), "/test/cancelled_file.txt",
-	)
-	if err != nil {
-		t.Fatalf("error checking for file: %v", err)
-	}
-
-	if file != nil {
-		t.Error("file should not exist after the cancelled transaction")
-	}
-}
-
-// A body that ends the transaction itself with ROLLBACK makes WithTx's
-// own rollback fail. WithTx must return that failure together with the
-// body's error.
-func TestRepositoriesTransactionRollbackFails(t *testing.T) {
-	t.Parallel()
-
-	db, cleanup := setupTestDB(t)
-	defer cleanup()
-
-	ctx := context.Background()
-	repos := database.NewRepositories(db)
-
-	err := repos.WithTx(ctx, func(ctx context.Context, tx *sql.Tx) error {
-		_, err := tx.ExecContext(ctx, "ROLLBACK")
-		if err != nil {
-			return err
-		}
-
-		return errIntentionalRollback
-	})
-	if !errors.Is(err, errIntentionalRollback) {
-		t.Fatalf("expected the body's error, got: %v", err)
-	}
-
-	if !strings.Contains(err.Error(), "rolling back transaction") {
-		t.Errorf("expected the failed rollback in the error, got: %v", err)
-	}
-}
-
-// When the body ends the transaction itself with ROLLBACK and then
-// panics, WithTx's own rollback fails; the panic must still reach the
-// caller.
-func TestRepositoriesTransactionPanicRollbackFails(t *testing.T) {
-	t.Parallel()
-
-	db, cleanup := setupTestDB(t)
-	defer cleanup()
-
-	ctx := context.Background()
-	repos := database.NewRepositories(db)
-
-	defer func() {
-		if recover() == nil {
-			t.Error("expected the body's panic to reach the caller")
-		}
-	}()
-
-	_ = repos.WithTx(ctx, func(ctx context.Context, tx *sql.Tx) error {
-		_, err := tx.ExecContext(ctx, "ROLLBACK")
-		if err != nil {
-			return err
-		}
-
-		panic(errIntentionalRollback)
-	})
-}
-
 func TestRepositoriesReadTransaction(t *testing.T) {
 	t.Parallel()
 

internal/database/schema/001.sql

@@ -86,7 +86,6 @@ CREATE TABLE IF NOT EXISTS snapshots (
     completed_at INTEGER,
     file_count INTEGER NOT NULL DEFAULT 0,
     chunk_count INTEGER NOT NULL DEFAULT 0,
-    new_chunk_size INTEGER NOT NULL DEFAULT 0,
     blob_count INTEGER NOT NULL DEFAULT 0,
     total_size INTEGER NOT NULL DEFAULT 0,
     blob_size INTEGER NOT NULL DEFAULT 0,

internal/database/snapshots.go

@@ -129,7 +129,6 @@ func (r *SnapshotRepository) UpdateExtendedStats(
 	compressionLevel int,
 	uploadBytes int64,
 	uploadDurationMs int64,
-	newChunkSize int64,
 ) error {
 	compressionRatio, err := r.extendedCompressionRatio(
 		ctx, tx, snapshotID, blobUncompressedSize,
@@ -144,19 +143,18 @@ func (r *SnapshotRepository) UpdateExtendedStats(
 		    compression_ratio = ?,
 		    compression_level = ?,
 		    upload_bytes = ?,
-		    upload_duration_ms = ?,
+		    upload_duration_ms = ?
-		    new_chunk_size = ?
 		WHERE id = ?
 	`
 
 	if tx != nil {
 		_, err = tx.ExecContext(ctx, query,
 			blobUncompressedSize, compressionRatio, compressionLevel,
-			uploadBytes, uploadDurationMs, newChunkSize, snapshotID)
+			uploadBytes, uploadDurationMs, snapshotID)
 	} else {
 		_, err = r.db.ExecWithLog(ctx, query,
 			blobUncompressedSize, compressionRatio, compressionLevel,
-			uploadBytes, uploadDurationMs, newChunkSize, snapshotID)
+			uploadBytes, uploadDurationMs, snapshotID)
 	}
 
 	if err != nil {
@@ -596,24 +594,45 @@ func (r *SnapshotRepository) GetSnapshotUncompressedChunkSize(
 	return totalSize, nil
 }
 
-// GetSnapshotNewChunkSize returns the total plaintext size of the chunks the
+// GetSnapshotNewChunkSize returns the sum of plaintext sizes of chunks that are
-// snapshot's backup stored that were not stored before, as the backup
+// referenced by this snapshot but not by any earlier completed snapshot known to
-// recorded it. It is not derived from the snapshot's files: a file's row is
+// the local database. The result is the marginal uncompressed data this snapshot
-// shared by every snapshot that lists it and is rewritten when the file
+// added to the dedup pool — i.e., the delta from prior snapshots.
-// changes, so it shows only the file's latest chunks.
 func (r *SnapshotRepository) GetSnapshotNewChunkSize(
 	ctx context.Context, snapshotID string,
 ) (int64, error) {
-	query := `SELECT new_chunk_size FROM snapshots WHERE id = ?`
+	query := `
+		WITH this_snap_chunks AS (
+			SELECT DISTINCT fc.chunk_hash
+			FROM snapshot_files sf
+			JOIN file_chunks fc ON sf.file_id = fc.file_id
+			WHERE sf.snapshot_id = ?
+		),
+		prior_chunks AS (
+			SELECT DISTINCT fc.chunk_hash
+			FROM snapshots s
+			JOIN snapshot_files sf ON sf.snapshot_id = s.id
+			JOIN file_chunks fc ON fc.file_id = sf.file_id
+			WHERE s.completed_at IS NOT NULL
+			  AND s.id != ?
+			  AND s.started_at < (SELECT started_at FROM snapshots WHERE id = ?)
+		)
+		SELECT COALESCE(SUM(c.size), 0)
+		FROM chunks c
+		JOIN this_snap_chunks t ON c.chunk_hash = t.chunk_hash
+		WHERE c.chunk_hash NOT IN (SELECT chunk_hash FROM prior_chunks)
+	`
 
-	var newChunkSize int64
+	var totalSize int64
 
-	err := r.db.conn.QueryRowContext(ctx, query, snapshotID).Scan(&newChunkSize)
+	err := r.db.conn.QueryRowContext(
+		ctx, query, snapshotID, snapshotID, snapshotID,
+	).Scan(&totalSize)
 	if err != nil {
 		return 0, fmt.Errorf("querying new chunk size: %w", err)
 	}
 
-	return newChunkSize, nil
+	return totalSize, nil
 }
 
 // GetIncompleteSnapshots returns all snapshots that haven't been completed

internal/log/tty_handler.go

@@ -10,8 +10,6 @@ import (
 	"sync"
 	"time"
 	"unicode"
-
-	"github.com/dustin/go-humanize"
 )
 
 // groupSeparator joins an open group path to an attribute key. This
@@ -306,13 +304,18 @@ func formatDuration(d time.Duration) string {
 	}
 }
 
-// formatBytes formats a byte count with humanize.Bytes, as every command
+// formatBytes formats bytes in a human-readable way
-// prints one. humanize.Bytes takes no negative count, so one is printed
-// as it is.
 func formatBytes(b int64) string {
-	if b < 0 {
+	const unit = 1024
+	if b < unit {
 		return fmt.Sprintf("%d B", b)
 	}
 
-	return humanize.Bytes(uint64(b))
+	div, exp := int64(unit), 0
+	for n := b / unit; n >= unit; n /= unit {
+		div *= unit
+		exp++
+	}
+
+	return fmt.Sprintf("%.1f %cB", float64(b)/float64(div), "KMGTPE"[exp])
 }

internal/log/tty_handler_test.go

@@ -200,8 +200,7 @@ func TestTTYHandlerWithGroupQualifiesKeys(t *testing.T) {
 func TestTTYHandlerByteFormattingSurvivesGrouping(t *testing.T) {
 	t.Parallel()
 
-	// Printed as "1.0 MB", in powers of 1000 like every other byte count.
+	const oneAndAHalfKiB = 1536
-	const oneMegabyte = 1_000_000
 
 	for name, testCase := range map[string]struct {
 		derive func(*slog.Logger) *slog.Logger
@@ -224,13 +223,13 @@ func TestTTYHandlerByteFormattingSurvivesGrouping(t *testing.T) {
 			var buf bytes.Buffer
 
 			logger := slog.New(log.NewTTYHandler(&buf, debugHandlerOptions()))
-			testCase.derive(logger).Info("uploaded", "bytes", oneMegabyte)
+			testCase.derive(logger).Info("uploaded", "bytes", oneAndAHalfKiB)
 
 			line := ansiEscape.ReplaceAllString(buf.String(), "")
 
-			assert.Contains(t, line, testCase.key+"=1.0 MB",
+			assert.Contains(t, line, testCase.key+"=1.5 KB",
 				"a byte count must be human-readable however it is qualified")
-			assert.NotContains(t, line, strconv.Itoa(oneMegabyte),
+			assert.NotContains(t, line, strconv.Itoa(oneAndAHalfKiB),
 				"the raw number must not survive the formatting")
 		})
 	}

internal/snapshot/exclude_test.go

@@ -531,50 +531,3 @@ func TestExcludePatterns_UnanchoredPatternFile(t *testing.T) {
 	require.Equal(t, 1, result.FilesScanned,
 		"Unanchored pattern for file should match anywhere")
 }
-
-func TestExcludePatterns_DoubleStarDirectoryAtEveryDepth(t *testing.T) {
-	t.Parallel()
-
-	// As in gitignore, a leading **/ also matches directly under the source dir
-	fs := setupAnchoredTestFS(t)
-
-	scanner, repos, cleanup := createTestScanner(t, fs, []string{"**/projectname"})
-	defer cleanup()
-
-	ctx := context.Background()
-	createSnapshotRecord(ctx, t, repos, "test-snapshot")
-
-	result, err := scanner.Scan(ctx, "/backup", "test-snapshot")
-	require.NoError(t, err)
-
-	// **/projectname should exclude BOTH:
-	// - /backup/projectname/file.txt
-	// - /backup/otherproject/projectname/file.txt
-	// Total files: 4, excluded: 2
-	require.Equal(t, 2, result.FilesScanned,
-		"**/ directory pattern should match at the top level and nested")
-}
-
-func TestExcludePatterns_DoubleStarFileAtEveryDepth(t *testing.T) {
-	t.Parallel()
-
-	// As in gitignore, a leading **/ also matches directly under the source dir
-	fs := setupAnchoredTestFS(t)
-
-	scanner, repos, cleanup := createTestScanner(t, fs, []string{"**/*.txt"})
-	defer cleanup()
-
-	ctx := context.Background()
-	createSnapshotRecord(ctx, t, repos, "test-snapshot")
-
-	result, err := scanner.Scan(ctx, "/backup", "test-snapshot")
-	require.NoError(t, err)
-
-	// **/*.txt should exclude ALL .txt files:
-	// - /backup/file.txt
-	// - /backup/projectname/file.txt
-	// - /backup/otherproject/projectname/file.txt
-	// Total files: 4, excluded: 3
-	require.Equal(t, 1, result.FilesScanned,
-		"**/ file pattern should match at the top level and nested")
-}

internal/snapshot/progress.go

@@ -56,27 +56,23 @@ const (
 
 // ProgressStats holds atomic counters for progress tracking
 type ProgressStats struct {
-	FilesScanned   atomic.Int64 // Total files seen during scan (includes skipped)
+	FilesScanned     atomic.Int64 // Total files seen during scan (includes skipped)
-	FilesProcessed atomic.Int64 // Files actually processed in phase 2
+	FilesProcessed   atomic.Int64 // Files actually processed in phase 2
-	FilesSkipped   atomic.Int64 // Files skipped due to no changes
+	FilesSkipped     atomic.Int64 // Files skipped due to no changes
-	BytesScanned   atomic.Int64 // Bytes from new/changed files only
+	BytesScanned     atomic.Int64 // Bytes from new/changed files only
-	BytesSkipped   atomic.Int64 // Bytes from unchanged files
+	BytesSkipped     atomic.Int64 // Bytes from unchanged files
-	BytesProcessed atomic.Int64 // Actual bytes processed (for ETA calculation)
+	BytesProcessed   atomic.Int64 // Actual bytes processed (for ETA calculation)
-	ChunksCreated  atomic.Int64
+	ChunksCreated    atomic.Int64
-	BlobsCreated   atomic.Int64
+	BlobsCreated     atomic.Int64
-	BlobsUploaded  atomic.Int64
+	BlobsUploaded    atomic.Int64
-	BytesUploaded  atomic.Int64
+	BytesUploaded    atomic.Int64
-	CurrentFile    atomic.Value // stores string
+	CurrentFile      atomic.Value // stores string
-	TotalSize      atomic.Int64 // Size to process in the paths scanned so far
+	TotalSize        atomic.Int64 // Total size to process (set after scan phase)
-	TotalFiles     atomic.Int64 // Files to process in the paths scanned so far
+	TotalFiles       atomic.Int64 // Total files to process in phase 2
-	StartTime      time.Time
+	ProcessStartTime atomic.Value // stores time.Time when processing starts
-	mu             sync.RWMutex
+	StartTime        time.Time
-	lastDetailTime time.Time
+	mu               sync.RWMutex
-
+	lastDetailTime   time.Time
-	// Guarded by mu: when the last scan phase ended, and
-	// BytesProcessed at that moment.
-	processStartTime  time.Time
-	processStartBytes int64
 
 	// Upload tracking
 	CurrentUpload    atomic.Value // stores *UploadInfo
@@ -152,36 +148,10 @@ func (pr *ProgressReporter) GetStats() *ProgressStats {
 	return pr.stats
 }
 
-// AddTotalSize adds the size one path of the snapshot has to process to
+// SetTotalSize sets the total size to process (after scan phase)
-// the total, once that path's scan phase is done, and starts measuring
+func (pr *ProgressReporter) SetTotalSize(size int64) {
-// the processing rate again. The processed counts run across every path,
+	pr.stats.TotalSize.Store(size)
-// so the total does too. Restarting the rate keeps a path's scan phase,
+	pr.stats.ProcessStartTime.Store(time.Now().UTC())
-// which processes nothing, out of the rate while that path is processed.
-// During a later path's scan phase the rate is still the previous
-// path's, and falls as that scan goes on.
-func (pr *ProgressReporter) AddTotalSize(size int64) {
-	pr.stats.TotalSize.Add(size)
-
-	pr.stats.mu.Lock()
-	defer pr.stats.mu.Unlock()
-
-	pr.stats.processStartTime = time.Now().UTC()
-	pr.stats.processStartBytes = pr.stats.BytesProcessed.Load()
-}
-
-// processRate returns the bytes processed per second since the last scan
-// phase ended, or 0 before the first path's scan phase is done.
-func (s *ProgressStats) processRate() float64 {
-	s.mu.RLock()
-	defer s.mu.RUnlock()
-
-	if s.processStartTime.IsZero() {
-		return 0
-	}
-
-	processed := s.BytesProcessed.Load() - s.processStartBytes
-
-	return float64(processed) / time.Since(s.processStartTime).Seconds()
 }
 
 // Helper functions
@@ -387,12 +357,19 @@ func (pr *ProgressReporter) printSummaryStatus() {
 	// Calculate ETA if we have total size and are processing
 	etaStr := ""
 
-	processRate := pr.stats.processRate()
+	if totalSize > 0 && bytesProcessed > 0 {
-	if totalSize > 0 && processRate > 0 {
+		processStart, ok := pr.stats.ProcessStartTime.Load().(time.Time)
-		remainingBytes := totalSize - bytesProcessed
+		if ok && !processStart.IsZero() {
-		remainingSeconds := float64(remainingBytes) / processRate
+			processElapsed := time.Since(processStart)
-		eta := time.Duration(remainingSeconds * float64(time.Second))
+
-		etaStr = " | ETA: " + formatDuration(eta)
+			rate := float64(bytesProcessed) / processElapsed.Seconds()
+			if rate > 0 {
+				remainingBytes := totalSize - bytesProcessed
+				remainingSeconds := float64(remainingBytes) / rate
+				eta := time.Duration(remainingSeconds * float64(time.Second))
+				etaStr = " | ETA: " + formatDuration(eta)
+			}
+		}
 	}
 
 	rate := float64(bytesScanned+bytesSkipped) / elapsed.Seconds()
@@ -444,18 +421,25 @@ func (pr *ProgressReporter) printDetailedStatus() {
 	log.Info("Elapsed time", "duration", formatDuration(elapsed))
 
 	// Calculate and show ETA if we have data
-	processRate := pr.stats.processRate()
+	if totalSize > 0 && bytesProcessed > 0 {
-	if totalSize > 0 && processRate > 0 {
+		processStart, ok := pr.stats.ProcessStartTime.Load().(time.Time)
-		remainingBytes := totalSize - bytesProcessed
+		if ok && !processStart.IsZero() {
-		remainingSeconds := float64(remainingBytes) / processRate
+			processElapsed := time.Since(processStart)
-		eta := time.Duration(remainingSeconds * float64(time.Second))
+
-		percentComplete := float64(bytesProcessed) / float64(totalSize) * percentScale
+			processRate := float64(bytesProcessed) / processElapsed.Seconds()
-		log.Info("Overall progress",
+			if processRate > 0 {
-			"percent", fmt.Sprintf("%.1f%%", percentComplete),
+				remainingBytes := totalSize - bytesProcessed
-			"processed", humanize.Bytes(safeUint64(bytesProcessed)),
+				remainingSeconds := float64(remainingBytes) / processRate
-			"total", humanize.Bytes(safeUint64(totalSize)),
+				eta := time.Duration(remainingSeconds * float64(time.Second))
-			"rate", humanize.Bytes(uint64(processRate))+"/s",
+				percentComplete := float64(bytesProcessed) / float64(totalSize) * percentScale
-			"eta", formatDuration(eta))
+				log.Info("Overall progress",
+					"percent", fmt.Sprintf("%.1f%%", percentComplete),
+					"processed", humanize.Bytes(safeUint64(bytesProcessed)),
+					"total", humanize.Bytes(safeUint64(totalSize)),
+					"rate", humanize.Bytes(uint64(processRate))+"/s",
+					"eta", formatDuration(eta))
+			}
+		}
 	}
 
 	log.Info("Files processed",

internal/snapshot/progress_rate_test.go

@@ -1,54 +0,0 @@
-//nolint:testpackage // exercises the unexported processRate helper
-package snapshot
-
-import (
-	"testing"
-	"time"
-)
-
-// TestProcessRateNotLoweredByLaterScanPhase feeds the reporter two paths
-// that each take 10 seconds to process, the second after a 30-second scan
-// phase. That scan phase processes nothing, so the rate while the second
-// path is processed must be that path's own.
-func TestProcessRateNotLoweredByLaterScanPhase(t *testing.T) {
-	t.Parallel()
-
-	const (
-		pathSize       = 1000
-		processingTime = 10 * time.Second
-		scanTime       = 30 * time.Second
-	)
-
-	// Never started, but Stop releases its tickers and signal handler.
-	progress := NewProgressReporter()
-	defer progress.Stop()
-
-	stats := progress.GetStats()
-
-	// Moves the processing start time back instead of sleeping.
-	elapse := func(d time.Duration) {
-		stats.mu.Lock()
-		defer stats.mu.Unlock()
-
-		stats.processStartTime = stats.processStartTime.Add(-d)
-	}
-
-	progress.AddTotalSize(pathSize)
-	stats.BytesProcessed.Add(pathSize)
-	elapse(processingTime)
-
-	elapse(scanTime)
-	progress.AddTotalSize(pathSize)
-	stats.BytesProcessed.Add(pathSize)
-	elapse(processingTime)
-
-	want := pathSize / processingTime.Seconds()
-	got := stats.processRate()
-
-	// The test's own run time adds to the elapsed time, so got is a hair
-	// under want.
-	if got > want || got < want*0.99 {
-		t.Errorf("rate while the second path is processed is %.1f bytes/s, "+
-			"want %.1f", got, want)
-	}
-}

internal/snapshot/progress_test.go

@@ -1,94 +0,0 @@
-package snapshot_test
-
-import (
-	"context"
-	"path/filepath"
-	"strings"
-	"testing"
-
-	"github.com/spf13/afero"
-	"sneak.berlin/go/vaultik/internal/database"
-	"sneak.berlin/go/vaultik/internal/snapshot"
-)
-
-// TestProgressPercentWithSecondPathSmaller backs up two paths with one
-// scanner, as a snapshot with two paths does, the second path smaller
-// than the first. The progress line divides the bytes processed by the
-// total size, so both must count both paths to stay within 100%.
-func TestProgressPercentWithSecondPathSmaller(t *testing.T) {
-	t.Parallel()
-
-	fs := afero.NewMemMapFs()
-	files := map[string]string{
-		"/large/one.txt":   strings.Repeat("1", 4000),
-		"/large/two.txt":   strings.Repeat("2", 4000),
-		"/small/three.txt": strings.Repeat("3", 1000),
-	}
-
-	for path, content := range files {
-		err := fs.MkdirAll(filepath.Dir(path), 0755)
-		if err != nil {
-			t.Fatalf("mkdir: %v", err)
-		}
-
-		err = afero.WriteFile(fs, path, []byte(content), 0644)
-		if err != nil {
-			t.Fatalf("write %s: %v", path, err)
-		}
-	}
-
-	db, err := database.NewTestDB()
-	if err != nil {
-		t.Fatalf("create test db: %v", err)
-	}
-
-	t.Cleanup(func() {
-		cerr := db.Close()
-		if cerr != nil {
-			t.Errorf("close db: %v", cerr)
-		}
-	})
-
-	repos := database.NewRepositories(db)
-
-	scanner := snapshot.NewScanner(snapshot.ScannerConfig{
-		FS:               fs,
-		ChunkSize:        int64(1024 * 16),
-		Repositories:     repos,
-		MaxBlobSize:      int64(1024 * 1024),
-		CompressionLevel: 3,
-		AgeRecipients:    []string{testAgePublicKey},
-		EnableProgress:   true,
-	})
-
-	// Never started, but Stop releases its tickers and signal handler.
-	progress := scanner.GetProgress()
-	defer progress.Stop()
-
-	ctx := context.Background()
-	snapshotID := "test-snapshot-progress"
-	createTestSnapshotRecord(ctx, t, repos, snapshotID)
-
-	for _, path := range []string{"/large", "/small"} {
-		_, err := scanner.Scan(ctx, path, snapshotID)
-		if err != nil {
-			t.Fatalf("scanning %s: %v", path, err)
-		}
-	}
-
-	stats := progress.GetStats()
-
-	// Directories count toward the total size but produce no chunks, so
-	// the percentage ends just under 100%.
-	percent := float64(stats.BytesProcessed.Load()) /
-		float64(stats.TotalSize.Load()) * 100
-	if percent > 100 {
-		t.Errorf("progress after both paths is %.1f%%, want at most 100%%",
-			percent)
-	}
-
-	if stats.FilesProcessed.Load() != stats.TotalFiles.Load() {
-		t.Errorf("progress after both paths is %d of %d files, want all",
-			stats.FilesProcessed.Load(), stats.TotalFiles.Load())
-	}
-}

internal/snapshot/scanner.go

@@ -133,21 +133,15 @@ type ScannerConfig struct {
 
 // ScanResult contains the results of a scan operation. Files and bytes
 // are counted per file: BytesScanned is the size of the new and changed
-// files, BytesSkipped that of the unchanged ones. FilesFailed counts the
+// files, BytesSkipped that of the unchanged ones.
-// new and changed files that phase 2 could not store; FilesScanned
-// includes them and BytesScanned does not. ChunksCreated counts the
-// chunks that were not already stored, and NewChunkSize is their total
-// size.
 type ScanResult struct {
 	FilesScanned   int
 	FilesSkipped   int
-	FilesFailed    int
 	FilesDeleted   int
 	BytesScanned   int64
 	BytesSkipped   int64
 	BytesDeleted   int64
 	ChunksCreated  int
-	NewChunkSize   int64
 	BlobsCreated   int
 	BlobsUploaded  int
 	BytesUploaded  int64
@@ -413,8 +407,8 @@ func (s *Scanner) summarizeScanPhase(
 	}
 
 	if s.progress != nil {
-		s.progress.AddTotalSize(totalSizeToProcess)
+		s.progress.SetTotalSize(totalSizeToProcess)
-		s.progress.GetStats().TotalFiles.Add(int64(len(filesToProcess)))
+		s.progress.GetStats().TotalFiles.Store(int64(len(filesToProcess)))
 	}
 
 	log.Info("Phase 1 complete",
@@ -1298,11 +1292,6 @@ func (s *Scanner) batchAddFilesToSnapshot(
 func (s *Scanner) processPhase(
 	ctx context.Context, filesToProcess []*FileToProcess, result *ScanResult,
 ) error {
-	// On an error or cancellation the blob being packed is never
-	// finalized, so its temp file must be removed here. After a
-	// successful flush there is no such blob and this does nothing.
-	defer s.packer.DiscardCurrentBlob()
-
 	// Calculate total bytes to process
 	var totalBytes int64
 	for _, f := range filesToProcess {
@@ -1320,13 +1309,6 @@ func (s *Scanner) processPhase(
 
 	// Process each file
 	for _, fileToProcess := range filesToProcess {
-		// Check context cancellation
-		select {
-		case <-ctx.Done():
-			return ctx.Err()
-		default:
-		}
-
 		// Update progress
 		if s.progress != nil {
 			s.progress.GetStats().CurrentFile.Store(fileToProcess.Path)
@@ -1363,32 +1345,13 @@ func (s *Scanner) processPhase(
 	return s.finalizeProcessPhase(ctx, result)
 }
 
-// processFileWithErrorHandling records a directory or symlink, or wraps
+// processFileWithErrorHandling wraps processFileStreaming with error recovery for
-// processFileStreaming for a regular file with error recovery for deleted
+// deleted files and skip-errors mode. Returns (skipped, error).
-// files and skip-errors mode. Returns (skipped, error).
 func (s *Scanner) processFileWithErrorHandling(
 	ctx context.Context, fileToProcess *FileToProcess, result *ScanResult,
 ) (bool, error) {
-	// A directory or symlink has no data to open or read; it is only
-	// recorded in the local index. An error recording it stops the run
-	// even under --skip-errors, or the snapshot would complete without it.
-	mode := os.FileMode(fileToProcess.File.Mode)
-	if mode&os.ModeSymlink != 0 || mode.IsDir() {
-		err := s.recordNonRegularFile(ctx, fileToProcess)
-		if err != nil {
-			return false, fmt.Errorf("processing file %s: %w", fileToProcess.Path, err)
-		}
-
-		return false, nil
-	}
-
 	err := s.processFileStreaming(ctx, fileToProcess, result)
 	if err != nil {
-		// A cancelled run stops here even under --skip-errors, rather than
-		// counting this file as failed and going on to the next one.
-		if ctx.Err() != nil {
-			return false, fmt.Errorf("processing file %s: %w", fileToProcess.Path, err)
-		}
 		// A packer/database/encryption/upload failure means the chunk's data
 		// may not have been stored. Skipping the file would let the snapshot
 		// record a file whose chunk is in no blob and cannot be restored, so
@@ -1402,7 +1365,7 @@ func (s *Scanner) processFileWithErrorHandling(
 			log.Warn("File was deleted during backup, skipping",
 				"path", fileToProcess.Path)
 
-			countFailedFile(fileToProcess, result)
+			result.FilesSkipped++
 
 			return true, nil
 		}
@@ -1413,7 +1376,7 @@ func (s *Scanner) processFileWithErrorHandling(
 			s.ui.Errorf("Failed to process %s: %v. Skipping (--skip-errors).",
 				s.ui.Path(fileToProcess.Path), err)
 
-			countFailedFile(fileToProcess, result)
+			result.FilesSkipped++
 
 			return true, nil
 		}
@@ -1424,13 +1387,6 @@ func (s *Scanner) processFileWithErrorHandling(
 	return false, nil
 }
 
-// countFailedFile counts a file that phase 2 could not store as failed
-// and takes its size back out of BytesScanned, where phase 1 put it.
-func countFailedFile(fileToProcess *FileToProcess, result *ScanResult) {
-	result.FilesFailed++
-	result.BytesScanned -= fileToProcess.FileInfo.Size()
-}
-
 // printProcessingProgress prints a periodic progress line during the process phase,
 // showing files processed, bytes transferred, throughput, and ETA
 func (s *Scanner) printProcessingProgress(
@@ -1799,11 +1755,16 @@ func (e *packerError) Error() string { return e.err.Error() }
 
 func (e *packerError) Unwrap() error { return e.err }
 
-// processFileStreaming processes a regular file by streaming chunks directly
+// processFileStreaming processes a file by streaming chunks directly to the packer
-// to the packer
 func (s *Scanner) processFileStreaming(
 	ctx context.Context, fileToProcess *FileToProcess, result *ScanResult,
 ) error {
+	// Symlinks and directories have no data to chunk — just record them in the DB.
+	mode := os.FileMode(fileToProcess.File.Mode)
+	if mode&os.ModeSymlink != 0 || mode.IsDir() {
+		return s.recordNonRegularFile(ctx, fileToProcess)
+	}
+
 	file, err := s.fs.Open(fileToProcess.Path)
 	if err != nil {
 		return fmt.Errorf("opening file: %w", wrapPermissionError(fileToProcess.Path, err))
@@ -1869,12 +1830,11 @@ func (s *Scanner) processFileStreaming(
 	return nil
 }
 
-// updateChunkStats counts a chunk that was not already stored, and its
+// updateChunkStats counts a chunk that was not already stored. The scan
-// size. The scan result's file counts, BytesScanned and BytesSkipped are
+// result's file counts, BytesScanned and BytesSkipped are not touched
-// not touched here: the scan phase counts each file once.
+// here: the scan phase counts each file once.
 func (s *Scanner) updateChunkStats(chunkSize int64, result *ScanResult) {
 	result.ChunksCreated++
-	result.NewChunkSize += chunkSize
 
 	if s.progress != nil {
 		s.progress.GetStats().ChunksCreated.Add(1)
@@ -2022,14 +1982,6 @@ func compileExcludePatterns(patterns []string) []compiledPattern {
 		// Remove trailing slash if present (directory indicator)
 		pattern = strings.TrimSuffix(pattern, "/")
 
-		// A leading "**/" demands a "/" before the name and so misses an
-		// entry directly under the source path. An unanchored pattern
-		// already matches at every depth, so drop the prefix: as in
-		// gitignore, "**/x" then also matches a top-level "x".
-		if !anchored {
-			pattern = strings.TrimPrefix(pattern, "**/")
-		}
-
 		// Compile the glob pattern
 		// For patterns without path separators, we need to match them as components
 		// e.g., ".git" should match ".git" anywhere in the path

internal/snapshot/skip_errors_test.go

@@ -82,32 +82,6 @@ func (f *readFailFs) Open(name string) (afero.File, error) {
 	return file, nil
 }
 
-// cancelOnOpenFs cancels the run when the scanner opens the target file to
-// back it up, as Ctrl-C partway through processing would, and records each
-// file opened after that.
-type cancelOnOpenFs struct {
-	afero.Fs
-
-	target            string
-	cancel            context.CancelFunc
-	cancelled         bool
-	openedAfterCancel []string
-}
-
-//nolint:ireturn // afero.Fs.Open is defined to return the interface.
-func (f *cancelOnOpenFs) Open(name string) (afero.File, error) {
-	if f.cancelled {
-		f.openedAfterCancel = append(f.openedAfterCancel, name)
-	}
-
-	if name == f.target {
-		f.cancel()
-		f.cancelled = true
-	}
-
-	return f.Fs.Open(name)
-}
-
 // linkRemovedAfterLstatFs is the real filesystem, except that the symlink at
 // target is removed right after the walk lstats it, as happens when a link is
 // deleted during a backup. The scanner's readlink of it then fails.
@@ -154,16 +128,15 @@ func writeSkipErrorTestFile(t *testing.T, fs afero.Fs, path, content string) {
 	}
 }
 
-// runSkipErrorScan scans source on fs under ctx with the given skip-errors
+// runSkipErrorScan scans source on fs with the given skip-errors setting,
-// setting, printing user-facing messages to uiw (nil discards them), and
+// printing user-facing messages to uiw (nil discards them), and returns the
-// returns the repositories (for inspection) and the scan error.
+// repositories (for inspection) and the scan error.
 func runSkipErrorScan(
-	ctx context.Context, t *testing.T, fs afero.Fs, source string,
+	t *testing.T, fs afero.Fs, source string, skipErrors bool, uiw *ui.Writer,
-	skipErrors bool, uiw *ui.Writer,
 ) (*database.Repositories, error) {
 	t.Helper()
 
-	db, err := database.New(ctx, ":memory:")
+	db, err := database.NewTestDB()
 	if err != nil {
 		t.Fatalf("create test db: %v", err)
 	}
@@ -188,6 +161,7 @@ func runSkipErrorScan(
 		SkipErrors:       skipErrors,
 	})
 
+	ctx := context.Background()
 	snapshotID := "test-snapshot-skip-errors"
 	createTestSnapshotRecord(ctx, t, repos, snapshotID)
 
@@ -211,7 +185,7 @@ func TestScannerPackingFailureAbortsUnderSkipErrors(t *testing.T) {
 	writeSkipErrorTestFile(t, fs, "/source/file1.txt", "first file content")
 	writeSkipErrorTestFile(t, fs, "/source/file2.txt", "second file content")
 
-	repos, err := runSkipErrorScan(context.Background(), t, fs, "/source", true, nil)
+	repos, err := runSkipErrorScan(t, fs, "/source", true, nil)
 	if err == nil {
 		t.Fatal("expected scan to abort on the packer error, got nil")
 	}
@@ -238,7 +212,7 @@ func TestScannerReadErrorAbortsWithoutSkipErrors(t *testing.T) {
 	fs := &readFailFs{Fs: afero.NewMemMapFs(), target: target}
 	writeSkipErrorTestFile(t, fs, target, "content that cannot be read")
 
-	_, err := runSkipErrorScan(context.Background(), t, fs, "/source", false, nil)
+	_, err := runSkipErrorScan(t, fs, "/source", false, nil)
 	if err == nil {
 		t.Fatal("expected scan to fail on the read error, got nil")
 	}
@@ -254,7 +228,7 @@ func TestScannerReadErrorSkippedWithSkipErrors(t *testing.T) {
 	fs := &readFailFs{Fs: afero.NewMemMapFs(), target: target}
 	writeSkipErrorTestFile(t, fs, target, "content that cannot be read")
 
-	repos, err := runSkipErrorScan(context.Background(), t, fs, "/source", true, nil)
+	repos, err := runSkipErrorScan(t, fs, "/source", true, nil)
 	if err != nil {
 		t.Fatalf("expected scan to complete with --skip-errors, got %v", err)
 	}
@@ -293,7 +267,7 @@ func TestScannerUnreadableSymlinkAbortsWithoutSkipErrors(t *testing.T) {
 	sourceDir, linkPath := writeSymlinkSource(t)
 	fs := &linkRemovedAfterLstatFs{t: t, target: linkPath}
 
-	_, err := runSkipErrorScan(context.Background(), t, fs, sourceDir, false, nil)
+	_, err := runSkipErrorScan(t, fs, sourceDir, false, nil)
 	if !errors.Is(err, os.ErrNotExist) {
 		t.Fatalf("expected scan to fail on the removed symlink, got %v", err)
 	}
@@ -309,7 +283,7 @@ func TestScannerUnreadableSymlinkSkippedWithSkipErrors(t *testing.T) {
 	fs := &linkRemovedAfterLstatFs{t: t, target: linkPath}
 	uiw := ui.NewWithColor(io.Discard, false)
 
-	repos, err := runSkipErrorScan(context.Background(), t, fs, sourceDir, true, uiw)
+	repos, err := runSkipErrorScan(t, fs, sourceDir, true, uiw)
 	if err != nil {
 		t.Fatalf("expected scan to complete with --skip-errors, got %v", err)
 	}
@@ -328,113 +302,3 @@ func TestScannerUnreadableSymlinkSkippedWithSkipErrors(t *testing.T) {
 		t.Fatalf("expected %s not to be recorded", linkPath)
 	}
 }
-
-// TestScannerCancelStopsSkipErrorsRun checks that a --skip-errors backup
-// cancelled partway through processing returns the cancellation error,
-// opens no further file, and reports no file as failed.
-func TestScannerCancelStopsSkipErrorsRun(t *testing.T) {
-	t.Parallel()
-
-	tests := []struct {
-		name          string
-		targetContent string
-	}{
-		// The cancellation lands while the target is being read.
-		{name: "while reading a file", targetContent: "first file content"},
-		// An empty target has no chunks, so the cancellation goes unnoticed
-		// until the run moves on to the next file.
-		{name: "between files", targetContent: ""},
-	}
-
-	for _, tt := range tests {
-		t.Run(tt.name, func(t *testing.T) {
-			t.Parallel()
-
-			const target = "/source/a.txt"
-
-			ctx, cancel := context.WithCancel(context.Background())
-			defer cancel()
-
-			fs := &cancelOnOpenFs{
-				Fs: afero.NewMemMapFs(), target: target, cancel: cancel,
-			}
-			writeSkipErrorTestFile(t, fs, target, tt.targetContent)
-			writeSkipErrorTestFile(t, fs, "/source/b.txt", "second file content")
-			writeSkipErrorTestFile(t, fs, "/source/c.txt", "third file content")
-
-			uiw := ui.NewWithColor(io.Discard, false)
-
-			_, err := runSkipErrorScan(ctx, t, fs, "/source", true, uiw)
-			if !errors.Is(err, context.Canceled) {
-				t.Fatalf("expected the cancellation error, got %v", err)
-			}
-
-			if len(fs.openedAfterCancel) != 0 {
-				t.Fatalf("expected no file opened after the cancellation, got %v",
-					fs.openedAfterCancel)
-			}
-
-			if uiw.ErrorCount() != 0 {
-				t.Fatalf("expected no file reported as failed, got %d error lines",
-					uiw.ErrorCount())
-			}
-		})
-	}
-}
-
-// TestScannerRemovesBlobTempFileWhenRunStops checks that a run stopped
-// part-way, by a file it cannot read or by a cancellation, removes the
-// temp file of the blob it was packing.
-func TestScannerRemovesBlobTempFileWhenRunStops(t *testing.T) {
-	t.Parallel()
-
-	// a.txt is backed up first and starts a blob; the run stops at b.txt.
-	const target = "/source/b.txt"
-
-	tests := []struct {
-		name  string
-		newFs func(cancel context.CancelFunc) afero.Fs
-	}{
-		{
-			name: "file cannot be read",
-			newFs: func(context.CancelFunc) afero.Fs {
-				return &readFailFs{Fs: afero.NewMemMapFs(), target: target}
-			},
-		},
-		{
-			name: "cancelled",
-			newFs: func(cancel context.CancelFunc) afero.Fs {
-				return &cancelOnOpenFs{
-					Fs: afero.NewMemMapFs(), target: target, cancel: cancel,
-				}
-			},
-		},
-	}
-
-	for _, tt := range tests {
-		t.Run(tt.name, func(t *testing.T) {
-			t.Parallel()
-
-			ctx, cancel := context.WithCancel(context.Background())
-			defer cancel()
-
-			fs := tt.newFs(cancel)
-			writeSkipErrorTestFile(t, fs, "/source/a.txt", "first file content")
-			writeSkipErrorTestFile(t, fs, target, "second file content")
-
-			_, err := runSkipErrorScan(ctx, t, fs, "/source", false, nil)
-			if err == nil {
-				t.Fatal("expected the scan to stop with an error, got nil")
-			}
-
-			left, err := afero.Glob(fs, filepath.Join(os.TempDir(), "vaultik-blob-*"))
-			if err != nil {
-				t.Fatalf("listing blob temp files: %v", err)
-			}
-
-			if len(left) != 0 {
-				t.Fatalf("expected no blob temp file left, got %v", left)
-			}
-		})
-	}
-}

internal/snapshot/snapshot.go

@@ -115,37 +115,20 @@ func ShortHostname(hostname string) string {
 
 // CreateSnapshotWithName creates a new snapshot record with an optional
 // snapshot name. The snapshot ID format is: hostname_name_timestamp or
-// hostname_timestamp if name is empty. The timestamp is in whole seconds.
+// hostname_timestamp if name is empty.
-// If the local index already has a snapshot with that ID, from a run of the
-// same name that started in the same second, it waits a second and takes a
-// new timestamp.
 func (sm *SnapshotManager) CreateSnapshotWithName(
 	ctx context.Context, hostname, name, version, gitRevision string,
 ) (string, error) {
 	shortHostname := ShortHostname(hostname)
 
+	// Build snapshot ID with optional name
+	timestamp := time.Now().UTC().Format("2006-01-02T15:04:05Z")
+
 	var snapshotID string
-
+	if name != "" {
-	for {
+		snapshotID = fmt.Sprintf("%s_%s_%s", shortHostname, name, timestamp)
-		// Build snapshot ID with optional name
+	} else {
-		timestamp := time.Now().UTC().Format("2006-01-02T15:04:05Z")
+		snapshotID = fmt.Sprintf("%s_%s", shortHostname, timestamp)
-
-		if name != "" {
-			snapshotID = fmt.Sprintf("%s_%s_%s", shortHostname, name, timestamp)
-		} else {
-			snapshotID = fmt.Sprintf("%s_%s", shortHostname, timestamp)
-		}
-
-		existing, err := sm.repos.Snapshots.GetByID(ctx, snapshotID)
-		if err != nil {
-			return "", fmt.Errorf("looking up snapshot %s: %w", snapshotID, err)
-		}
-
-		if existing == nil {
-			break
-		}
-
-		time.Sleep(time.Second)
 	}
 
 	snapshot := &database.Snapshot{
@@ -199,7 +182,6 @@ func (sm *SnapshotManager) UpdateSnapshotStatsExtended(
 			stats.CompressionLevel,
 			stats.BytesUploaded,
 			stats.UploadDurationMs,
-			stats.NewChunkSize,
 		)
 	})
 }
@@ -893,7 +875,7 @@ func (sm *SnapshotManager) getFileSize(path string) int64 {
 // BackupStats contains statistics from a backup operation
 type BackupStats struct {
 	FilesScanned  int
-	TotalSize     int64 // Total size of the files in the snapshot
+	TotalSize     int64 // Total size of all files examined
 	ChunksCreated int
 	BlobsCreated  int
 	BytesUploaded int64
@@ -907,7 +889,6 @@ type ExtendedBackupStats struct {
 	BlobUncompressedSize int64 // Total uncompressed size of all referenced blobs
 	CompressionLevel     int   // Compression level used for this snapshot
 	UploadDurationMs     int64 // Total milliseconds spent uploading to S3
-	NewChunkSize         int64 // Total size of the chunks counted in ChunksCreated
 }
 
 // deleteOtherSnapshots deletes all snapshots except the current one

internal/snapshot/snapshot_test.go

@@ -386,36 +386,3 @@ func TestCleanSnapshotDBNonExistentSnapshot(t *testing.T) {
 		t.Fatalf("unexpected error: %v", err)
 	}
 }
-
-// Two creates of one snapshot name back to back start within one second,
-// the resolution of the timestamp in a snapshot ID. See
-// https://git.eeqj.de/sneak/vaultik/issues/270.
-func TestCreateSnapshotWithNameTwiceBackToBack(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	ctx := context.Background()
-
-	db, err := database.New(ctx, filepath.Join(t.TempDir(), "index.sqlite"))
-	if err != nil {
-		t.Fatalf("failed to create database: %v", err)
-	}
-
-	defer func() { _ = db.Close() }()
-
-	sm := &SnapshotManager{repos: database.NewRepositories(db)}
-
-	first, err := sm.CreateSnapshotWithName(ctx, "test-host", "data", "v", "g")
-	if err != nil {
-		t.Fatalf("first create failed: %v", err)
-	}
-
-	second, err := sm.CreateSnapshotWithName(ctx, "test-host", "data", "v", "g")
-	if err != nil {
-		t.Fatalf("second create failed: %v", err)
-	}
-
-	if first == second {
-		t.Fatalf("both creates returned snapshot ID %s", first)
-	}
-}

internal/storage/faultstore/faultstore.go

@@ -171,11 +171,6 @@ func (f *Storer) ListStream(
 	return f.inner.ListStream(ctx, prefix)
 }
 
-// DeletePartialUploads delegates unchanged.
-func (f *Storer) DeletePartialUploads(ctx context.Context, prefix string) error {
-	return f.inner.DeletePartialUploads(ctx, prefix)
-}
-
 // Info delegates unchanged.
 func (f *Storer) Info() storage.Info {
 	return f.inner.Info()

internal/storage/file.go

@@ -242,42 +242,6 @@ func (f *FileStorer) ListStream(ctx context.Context, prefix string) <-chan Objec
 	return ch
 }
 
-// DeletePartialUploads removes every file under prefix whose name ends in
-// tempSuffix. A missing prefix has none to remove.
-func (f *FileStorer) DeletePartialUploads(ctx context.Context, prefix string) error {
-	basePath := f.fullPath(prefix)
-
-	exists, err := afero.Exists(f.fs, basePath)
-	if err != nil {
-		return fmt.Errorf("checking path: %w", err)
-	}
-
-	if !exists {
-		return nil
-	}
-
-	err = afero.Walk(f.fs, basePath, func(path string, info os.FileInfo, err error) error {
-		if err != nil {
-			return err
-		}
-
-		if ctx.Err() != nil {
-			return ctx.Err()
-		}
-
-		if info.IsDir() || !strings.HasSuffix(info.Name(), tempSuffix) {
-			return nil
-		}
-
-		return f.fs.Remove(path)
-	})
-	if err != nil {
-		return fmt.Errorf("walking directory: %w", err)
-	}
-
-	return nil
-}
-
 // Info returns human-readable storage location information.
 func (f *FileStorer) Info() Info {
 	return Info{

internal/storage/file_atomic_test.go

@@ -120,45 +120,3 @@ func TestFileStorer_ListSkipsPartialFiles(t *testing.T) {
 		t.Fatalf("ListStream should return only the real key, got %v", streamed)
 	}
 }
-
-// TestFileStorer_DeletePartialUploads checks that a leftover temp file is
-// removed and the object at the real key is kept.
-func TestFileStorer_DeletePartialUploads(t *testing.T) {
-	t.Parallel()
-
-	base := t.TempDir()
-
-	f, err := storage.NewFileStorer(base)
-	if err != nil {
-		t.Fatalf("NewFileStorer: %v", err)
-	}
-
-	ctx := context.Background()
-
-	err = f.Put(ctx, testBlobKey, strings.NewReader("blob-bytes"))
-	if err != nil {
-		t.Fatalf("Put: %v", err)
-	}
-
-	leftover := filepath.Join(base, testBlobKey+"-123456.partial")
-
-	err = os.WriteFile(leftover, []byte("half"), 0o600)
-	if err != nil {
-		t.Fatalf("writing leftover temp file: %v", err)
-	}
-
-	err = f.DeletePartialUploads(ctx, "blobs/")
-	if err != nil {
-		t.Fatalf("DeletePartialUploads: %v", err)
-	}
-
-	_, err = os.Stat(leftover)
-	if !os.IsNotExist(err) {
-		t.Errorf("leftover temp file was not removed: %v", err)
-	}
-
-	_, err = f.Stat(ctx, testBlobKey)
-	if err != nil {
-		t.Errorf("Stat of the real key: %v", err)
-	}
-}

internal/storage/rclone.go

@@ -213,31 +213,6 @@ func (r *RcloneStorer) ListStream(
 	return ch
 }
 
-// DeletePartialUploads removes every object under prefix whose name ends
-// in tempSuffix.
-func (r *RcloneStorer) DeletePartialUploads(ctx context.Context, prefix string) error {
-	var partial []fs.Object
-
-	err := operations.ListFn(ctx, r.fsys, func(obj fs.Object) {
-		key := obj.Remote()
-		if strings.HasPrefix(key, prefix) && strings.HasSuffix(key, tempSuffix) {
-			partial = append(partial, obj)
-		}
-	})
-	if err != nil {
-		return fmt.Errorf("listing objects: %w", err)
-	}
-
-	for _, obj := range partial {
-		err = obj.Remove(ctx)
-		if err != nil {
-			return fmt.Errorf("removing object: %w", err)
-		}
-	}
-
-	return nil
-}
-
 // Info returns human-readable storage location information.
 func (r *RcloneStorer) Info() Info {
 	location := r.remote

internal/storage/rclone_test.go

@@ -198,47 +198,6 @@ func TestRcloneStorerListSkipsPartialFiles(t *testing.T) {
 	}
 }
 
-// TestRcloneStorerDeletePartialUploads checks that a temporary file left
-// by a killed upload is removed and the object at the real key is kept.
-//
-//nolint:paralleltest // NewRcloneStorer installs the process-global rclone config
-func TestRcloneStorerDeletePartialUploads(t *testing.T) {
-	dir := t.TempDir()
-	ctx := context.Background()
-
-	s, err := storage.NewRcloneStorer(ctx, ":local", dir)
-	if err != nil {
-		t.Fatalf("NewRcloneStorer: %v", err)
-	}
-
-	err = s.Put(ctx, testBlobKey, strings.NewReader("blob-bytes"))
-	if err != nil {
-		t.Fatalf("Put: %v", err)
-	}
-
-	leftover := filepath.Join(dir, testBlobKey+"-123456.partial")
-
-	err = os.WriteFile(leftover, []byte("half"), 0o600)
-	if err != nil {
-		t.Fatalf("writing leftover temp file: %v", err)
-	}
-
-	err = s.DeletePartialUploads(ctx, "blobs/")
-	if err != nil {
-		t.Fatalf("DeletePartialUploads: %v", err)
-	}
-
-	_, err = os.Stat(leftover)
-	if !os.IsNotExist(err) {
-		t.Errorf("leftover temp file was not removed: %v", err)
-	}
-
-	_, err = s.Stat(ctx, testBlobKey)
-	if err != nil {
-		t.Errorf("Stat of the real key: %v", err)
-	}
-}
-
 // newRcloneStorerOnWrappedLocal registers name as rclone's local backend
 // wrapped by wrap, and builds an rclone backend on it rooted at a fresh
 // temp directory. wrap changes the features the local backend reports, so

internal/storage/s3.go

@@ -99,12 +99,6 @@ func (s *S3Storer) ListStream(ctx context.Context, prefix string) <-chan ObjectI
 	return ch
 }
 
-// DeletePartialUploads has nothing to remove: S3 shows an object only once
-// its upload has completed, so an upload cut off part-way leaves none.
-func (s *S3Storer) DeletePartialUploads(_ context.Context, _ string) error {
-	return nil
-}
-
 // Info returns human-readable storage location information.
 func (s *S3Storer) Info() Info {
 	return Info{

internal/storage/storer.go

@@ -71,12 +71,6 @@ type Storer interface {
 	// If an error occurs during listing, the final item will have Err set.
 	ListStream(ctx context.Context, prefix string) <-chan ObjectInfo
 
-	// DeletePartialUploads removes every object under prefix that an
-	// upload cut off part-way left under a temporary name ending in
-	// `.partial`. The file and rclone backends' List and ListStream skip
-	// such an object.
-	DeletePartialUploads(ctx context.Context, prefix string) error
-
 	// Info returns human-readable storage location information.
 	Info() Info
 }

internal/storage/url.go

@@ -17,10 +17,8 @@ const (
 
 // Sentinel errors for storage URL parsing.
 var (
-	ErrEmptyStorageURL  = errors.New("storage URL is empty")
+	ErrEmptyStorageURL   = errors.New("storage URL is empty")
-	ErrEmptyFilePath    = errors.New("file URL path is empty")
+	ErrEmptyFilePath     = errors.New("file URL path is empty")
-	ErrRelativeFilePath = errors.New(
-		"file URL needs an absolute path, as in file:///path/to/backup")
 	ErrMissingBucket     = errors.New("s3 URL missing bucket name")
 	ErrMissingRemote     = errors.New("rclone URL missing remote name")
 	ErrUnsupportedScheme = errors.New(
@@ -53,8 +51,17 @@ func ParseStorageURL(rawURL string) (*URL, error) {
 		return nil, ErrEmptyStorageURL
 	}
 
+	// Handle file:// URLs
 	if after, ok := strings.CutPrefix(rawURL, "file://"); ok {
-		return parseFileURL(after)
+		path := after
+		if path == "" {
+			return nil, ErrEmptyFilePath
+		}
+
+		return &URL{
+			Scheme: schemeFile,
+			Prefix: path,
+		}, nil
 	}
 
 	if strings.HasPrefix(rawURL, "s3://") {
@@ -68,27 +75,6 @@ func ParseStorageURL(rawURL string) (*URL, error) {
 	return nil, ErrUnsupportedScheme
 }
 
-// parseFileURL parses the path that follows file://. The path must be
-// absolute: a relative one would resolve against the working directory,
-// so the destination would move with it. Percent-escapes are decoded, so
-// my%20stick names the directory "my stick"; a literal space is kept.
-func parseFileURL(rawPath string) (*URL, error) {
-	if rawPath == "" {
-		return nil, ErrEmptyFilePath
-	}
-
-	if !strings.HasPrefix(rawPath, "/") {
-		return nil, ErrRelativeFilePath
-	}
-
-	path, err := url.PathUnescape(rawPath)
-	if err != nil {
-		return nil, fmt.Errorf("invalid file URL path: %w", err)
-	}
-
-	return &URL{Scheme: schemeFile, Prefix: path}, nil
-}
-
 // parseS3URL parses an s3://bucket/prefix URL. It rejects credentials in
 // the userinfo and any query parameter other than endpoint, region and
 // ssl, so a credential-bearing URL is never stored or echoed.

internal/storage/url_parse_test.go

@@ -14,10 +14,7 @@ import (
 func TestParseStorageURLValid(t *testing.T) {
 	t.Parallel()
 
-	const (
+	const bucket = "mybucket"
-		bucket     = "mybucket"
-		fileScheme = "file"
-	)
 
 	cases := []struct {
 		name string
@@ -27,17 +24,7 @@ func TestParseStorageURLValid(t *testing.T) {
 		{
 			name: "file absolute path",
 			raw:  "file:///var/backups/vaultik",
-			want: &storage.URL{Scheme: fileScheme, Prefix: "/var/backups/vaultik"},
+			want: &storage.URL{Scheme: "file", Prefix: "/var/backups/vaultik"},
-		},
-		{
-			name: "file percent-escaped path is decoded",
-			raw:  "file:///Volumes/my%20stick/backup",
-			want: &storage.URL{Scheme: fileScheme, Prefix: "/Volumes/my stick/backup"},
-		},
-		{
-			name: "file path with a literal space",
-			raw:  "file:///Volumes/my stick/backup",
-			want: &storage.URL{Scheme: fileScheme, Prefix: "/Volumes/my stick/backup"},
 		},
 		{
 			name: "s3 bucket and prefix, ssl defaults on",
@@ -103,7 +90,6 @@ func TestParseStorageURLErrors(t *testing.T) {
 	}{
 		{"empty url", "", storage.ErrEmptyStorageURL},
 		{"file empty path", "file://", storage.ErrEmptyFilePath},
-		{"file relative path", "file://dest", storage.ErrRelativeFilePath},
 		{"s3 missing bucket", "s3://", storage.ErrMissingBucket},
 		{"s3 missing bucket with path", "s3:///justprefix", storage.ErrMissingBucket},
 		{"rclone missing remote", "rclone://", storage.ErrMissingRemote},

internal/vaultik/blob_fetch.go

@@ -103,8 +103,6 @@ func (v *Vaultik) FetchAndDecryptBlob(
 }
 
 // FetchBlob downloads a blob and returns a reader for the encrypted data.
-// The reader is closed as soon as ctx is cancelled, which ends a read
-// blocked inside it.
 func (v *Vaultik) FetchBlob(
 	ctx context.Context, blobHash string,
 ) (io.ReadCloser, error) {
@@ -122,47 +120,5 @@ func (v *Vaultik) FetchBlob(
 		return nil, fmt.Errorf("downloading blob %s: %w", shortHash(blobHash), err)
 	}
 
-	return newCloseOnCancelReader(ctx, rc), nil
+	return rc, nil
-}
-
-// closeOnCancelReader closes the reader it wraps when ctx is cancelled.
-// Not every backend's reader stops on cancel by itself (the file
-// backend's does not), and a read stalled on a slow or hung source would
-// otherwise outlast the shutdown timeout, so the process would exit
-// before restore or deep verify removed its decrypted temporary files.
-type closeOnCancelReader struct {
-	io.ReadCloser
-
-	ctx  context.Context //nolint:containedctx // Read reports its error
-	stop func() bool
-}
-
-func newCloseOnCancelReader(
-	ctx context.Context, rc io.ReadCloser,
-) *closeOnCancelReader {
-	return &closeOnCancelReader{
-		ReadCloser: rc,
-		ctx:        ctx,
-		stop:       context.AfterFunc(ctx, func() { _ = rc.Close() }),
-	}
-}
-
-// Read returns the context's error, not the closed reader's, once ctx
-// has been cancelled.
-func (r *closeOnCancelReader) Read(p []byte) (int, error) {
-	n, err := r.ReadCloser.Read(p)
-	if err != nil && r.ctx.Err() != nil {
-		return n, r.ctx.Err()
-	}
-
-	return n, err
-}
-
-// Close closes the wrapped reader, unless the cancel already closed it.
-func (r *closeOnCancelReader) Close() error {
-	if !r.stop() {
-		return nil
-	}
-
-	return r.ReadCloser.Close()
 }

internal/vaultik/destination_validation_test.go

@@ -257,10 +257,6 @@ func (s *stubLister) List(_ context.Context, _ string) ([]string, error) {
 	return nil, errStubUnused
 }
 
-func (s *stubLister) DeletePartialUploads(_ context.Context, _ string) error {
-	return errStubUnused
-}
-
 func (s *stubLister) Info() storage.Info {
 	return storage.Info{}
 }

internal/vaultik/helpers.go

@@ -3,7 +3,6 @@ package vaultik
 import (
 	"errors"
 	"fmt"
-	"math"
 	"regexp"
 	"strconv"
 	"strings"
@@ -48,10 +47,6 @@ const (
 	year  = 365 * day
 )
 
-// maxDuration is the largest value a time.Duration can hold, about 292
-// years.
-const maxDuration = time.Duration(math.MaxInt64)
-
 // A snapshot ID split on "_" has at least a hostname and a trailing
 // timestamp.
 const minSnapshotIDParts = 2
@@ -89,6 +84,22 @@ type SnapshotInfo struct {
 	RemotePresent    *bool            `json:"remote_present"`
 }
 
+// formatBytes formats bytes in a human-readable format
+func formatBytes(bytes int64) string {
+	const unit = 1024
+	if bytes < unit {
+		return fmt.Sprintf("%d B", bytes)
+	}
+
+	div, exp := int64(unit), 0
+	for n := bytes / unit; n >= unit; n /= unit {
+		div *= unit
+		exp++
+	}
+
+	return fmt.Sprintf("%.1f %cB", float64(bytes)/float64(div), "KMGTPE"[exp])
+}
+
 // parseSnapshotTimestamp extracts the timestamp from a snapshot ID
 // Format: hostname_snapshotname_2026-01-12T14:41:15Z
 func parseSnapshotTimestamp(snapshotID string) (time.Time, error) {
@@ -134,10 +145,10 @@ func parseSnapshotName(snapshotID, hostname string) string {
 // parseDuration parses a duration string with support for human-friendly units:
 // d/day/days, w/week/weeks, mo/month/months, y/year/years, plus standard Go
 // duration units. Following Go, m is minutes and mo is months. A bare number,
-// an unknown unit, a negative value, and a total longer than maxDuration are
+// an unknown unit, and a negative value are all rejected. Outside the Go
-// all rejected. Outside the Go units the input must be whole numbers each
+// units the input must be whole numbers each followed directly by a unit
-// followed directly by a unit (2w3d), so 1.0y and 30 days are errors;
+// (2w3d), so 1.0y and 30 days are errors; decimals work only in Go units
-// decimals work only in Go units (1.5h).
+// (1.5h).
 func parseDuration(s string) (time.Duration, error) {
 	if strings.HasPrefix(strings.TrimSpace(s), "-") {
 		return 0, errNegativeDuration
@@ -170,30 +181,19 @@ func parseDuration(s string) (time.Duration, error) {
 			return 0, fmt.Errorf("invalid number %q: %w", match[1], err)
 		}
 
-		var unitLength time.Duration
-
 		unit := strings.ToLower(match[2])
 		switch unit {
 		case "d", "day", "days":
-			unitLength = day
+			total += time.Duration(n) * day
 		case "w", "week", "weeks":
-			unitLength = week
+			total += time.Duration(n) * week
 		case "mo", "month", "months":
-			unitLength = month
+			total += time.Duration(n) * month
 		case "y", "year", "years":
-			unitLength = year
+			total += time.Duration(n) * year
 		default:
 			return 0, fmt.Errorf("%w %q", errUnknownTimeUnit, unit)
 		}
-
-		// Past maxDuration the sum wraps to a negative value, which would
-		// put the purge cutoff in the future.
-		if time.Duration(n) > (maxDuration-total)/unitLength {
-			return 0, fmt.Errorf("%w: %q is longer than about 292 years",
-				errInvalidDuration, s)
-		}
-
-		total += time.Duration(n) * unitLength
 	}
 
 	return total, nil

internal/vaultik/helpers_test.go

@@ -111,17 +111,6 @@ func TestParseDuration(t *testing.T) {
 		{"30 days", 0, true},
 		{"30 days ago", 0, true},
 		{"x7d", 0, true},
-		// The largest time.Duration is about 292 years. A larger value
-		// must be rejected, not wrapped to a negative one, which would
-		// put the cutoff in the future and select every snapshot.
-		{"292y", 292 * 365 * 24 * time.Hour, false},
-		{"293y", 0, true},
-		{"3559mo", 0, true},
-		{"15251w", 0, true},
-		{"106752d", 0, true},
-		{"2562048h", 0, true},
-		{"200y200y", 0, true},
-		{"292y6mo", 0, true},
 	}
 
 	for _, tt := range tests {

internal/vaultik/info.go

@@ -167,6 +167,10 @@ const (
 	// metadataKeyParts is the minimum "/"-separated segment count of a
 	// metadata object key (metadata/<snapshot-id>/<filename>).
 	metadataKeyParts = 3
+
+	// blobKeyParts is the minimum "/"-separated segment count of a blob
+	// object key (blobs/<aa>/<bb>/<hash>).
+	blobKeyParts = 4
 )
 
 // SnapshotMetadataInfo contains information about a single snapshot's metadata
@@ -177,11 +181,8 @@ type SnapshotMetadataInfo struct {
 	ManifestSize int64  `json:"manifest_size"`
 	DatabaseSize int64  `json:"database_size"`
 	TotalSize    int64  `json:"total_size"`
-
+	BlobCount    int    `json:"blob_count"`
-	// Both stay nil (null in the JSON) when the snapshot's manifest was
+	BlobsSize    int64  `json:"blobs_size"`
-	// listed but could not be read.
-	BlobCount *int   `json:"blob_count"`
-	BlobsSize *int64 `json:"blobs_size"`
 
 	// Set when the listing holds this snapshot's manifest.json.zst. A
 	// backup interrupted before its manifest upload leaves a directory
@@ -379,10 +380,6 @@ func (v *Vaultik) collectReferencedBlobsFromManifests(
 	for _, snapshotID := range snapshotIDs {
 		info := snapshotMetadata[snapshotID]
 		if !info.hasManifest {
-			// The orphan figures count this directory's blobs as
-			// orphaned, so it references none.
-			info.BlobCount, info.BlobsSize = new(int), new(int64)
-
 			continue
 		}
 
@@ -398,7 +395,7 @@ func (v *Vaultik) collectReferencedBlobsFromManifests(
 			continue
 		}
 
-		blobCount := manifest.BlobCount
+		info.BlobCount = manifest.BlobCount
 
 		var blobsSize int64
 
@@ -407,8 +404,7 @@ func (v *Vaultik) collectReferencedBlobsFromManifests(
 			blobsSize += blob.CompressedSize
 		}
 
-		info.BlobCount = &blobCount
+		info.BlobsSize = blobsSize
-		info.BlobsSize = &blobsSize
 	}
 
 	return referencedBlobs, unreadable
@@ -450,16 +446,23 @@ func (v *Vaultik) scanRemoteBlobStorage(
 		v.stdoutf("Scanning blobs...\n")
 	}
 
-	// Use prune's listing, so a file under blobs/ that prune would never
+	blobCh := v.Storage.ListStream(v.ctx, "blobs/")
-	// delete is not counted as a blob, and so not as an orphaned one.
+	allBlobs := make(map[string]int64)
-	allBlobs, err := v.listAllRemoteBlobs()
-	if err != nil {
-		return err
-	}
 
-	for _, size := range allBlobs {
+	for obj := range blobCh {
+		if obj.Err != nil {
+			return fmt.Errorf("listing blobs: %w", obj.Err)
+		}
+
+		parts := strings.Split(obj.Key, "/")
+		if len(parts) < blobKeyParts {
+			continue
+		}
+
+		hash := parts[3]
+		allBlobs[hash] = obj.Size
 		result.TotalBlobCount++
-		result.TotalBlobSize += size
+		result.TotalBlobSize += obj.Size
 	}
 
 	// A blob named only by a manifest that could not be read, or by one
@@ -513,23 +516,13 @@ func (v *Vaultik) printRemoteInfoTable(result *RemoteInfoResult) {
 		v.stdoutf("%s", separator)
 
 		for _, info := range result.Snapshots {
-			blobCount := unknownText
-			if info.BlobCount != nil {
-				blobCount = humanize.Comma(int64(*info.BlobCount))
-			}
-
-			blobsSize := unknownText
-			if info.BlobsSize != nil {
-				blobsSize = ubytes(*info.BlobsSize)
-			}
-
 			v.stdoutf(rowFormat,
 				truncateString(info.SnapshotID, snapshotIDColWidth),
 				ubytes(info.ManifestSize),
 				ubytes(info.DatabaseSize),
 				ubytes(info.TotalSize),
-				blobCount,
+				humanize.Comma(int64(info.BlobCount)),
-				blobsSize,
+				ubytes(info.BlobsSize),
 			)
 		}
 

internal/vaultik/integration_test.go

@@ -155,12 +155,6 @@ func (m *MockStorer) ListStream(
 	return ch
 }
 
-// DeletePartialUploads has nothing to remove: Put stores each object
-// under its key at once.
-func (m *MockStorer) DeletePartialUploads(_ context.Context, _ string) error {
-	return nil
-}
-
 func (m *MockStorer) Info() storage.Info {
 	return storage.Info{
 		Type:     "mock",

internal/vaultik/new_chunk_size_test.go

@@ -1,133 +0,0 @@
-package vaultik_test
-
-import (
-	"bytes"
-	"context"
-	"maps"
-	"path/filepath"
-	"testing"
-
-	"github.com/spf13/afero"
-	"github.com/stretchr/testify/assert"
-	"github.com/stretchr/testify/require"
-	"sneak.berlin/go/vaultik/internal/chunker"
-	"sneak.berlin/go/vaultik/internal/database"
-	"sneak.berlin/go/vaultik/internal/log"
-	"sneak.berlin/go/vaultik/internal/storage"
-	"sneak.berlin/go/vaultik/internal/vaultik"
-)
-
-// TestNewChunkSizeOfChangedFileStaysFixed covers
-// https://git.eeqj.de/sneak/vaultik/issues/311. A backup whose only change
-// is a modified file lists the size of the chunks that change added as its
-// NEW CHUNK SIZE, and a later backup that changes the file again leaves
-// every earlier snapshot's figure as it was. The file's row in the local
-// index is shared by all three snapshots and rewritten by each backup.
-func TestNewChunkSizeOfChangedFileStaysFixed(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	fs := afero.NewOsFs()
-	tempDir := t.TempDir()
-	dataDir := filepath.Join(tempDir, "src")
-	dbPath := filepath.Join(tempDir, "index.sqlite")
-	changedPath := filepath.Join(dataDir, "changed.bin")
-
-	ctx := context.Background()
-	files := writeFaultSourceTree(t, fs, dataDir)
-	cfg := changedFileConfig(dataDir, dbPath)
-
-	appendRandomBytes(t, fs, files, changedPath, appendedFileSize)
-
-	store, err := storage.NewFileStorer(filepath.Join(tempDir, "remote"))
-	require.NoError(t, err)
-
-	db, err := database.New(ctx, dbPath)
-	require.NoError(t, err)
-	t.Cleanup(func() { _ = db.Close() })
-
-	repos := database.NewRepositories(db)
-	v := newBackupVaultik(ctx, cfg, store, repos, db, fs)
-
-	require.NoError(t, backUp(v, "first"))
-
-	firstFiles := maps.Clone(files)
-	firstID := localSnapshotID(ctx, t, repos, "first")
-
-	appendRandomBytes(t, fs, files, changedPath, faultChunkSize)
-	require.NoError(t, backUp(v, "second"))
-
-	secondID := localSnapshotID(ctx, t, repos, "second")
-	secondAdded := sizeOfNewChunks(t, files, firstFiles)
-	require.Positive(t, secondAdded)
-	assert.Equal(t, secondAdded, listedNewChunkSizes(t, v)[secondID],
-		"the second snapshot must count the chunks the change added")
-
-	appendRandomBytes(t, fs, files, changedPath, faultChunkSize)
-	require.NoError(t, backUp(v, "third"))
-
-	sizes := listedNewChunkSizes(t, v)
-	assert.Equal(t, sizeOfNewChunks(t, firstFiles, nil), sizes[firstID],
-		"a later backup must not change the first snapshot's figure")
-	assert.Equal(t, secondAdded, sizes[secondID],
-		"a later backup must not change the second snapshot's figure")
-}
-
-// sizeOfNewChunks returns the total size of the distinct chunks of the
-// files in after that no file in before has, cut the way the backup cuts
-// them.
-func sizeOfNewChunks(t *testing.T, after, before map[string][]byte) int64 {
-	t.Helper()
-
-	known := make(map[string]bool)
-	for _, chunk := range chunksOf(t, before) {
-		known[chunk.Hash] = true
-	}
-
-	var total int64
-
-	for _, chunk := range chunksOf(t, after) {
-		if !known[chunk.Hash] {
-			known[chunk.Hash] = true
-			total += chunk.Size
-		}
-	}
-
-	return total
-}
-
-// chunksOf returns the chunks of every file in files.
-func chunksOf(t *testing.T, files map[string][]byte) []chunker.Chunk {
-	t.Helper()
-
-	c := chunker.NewChunker(faultChunkSize)
-
-	var all []chunker.Chunk
-
-	for _, content := range files {
-		chunks, err := c.ChunkReader(bytes.NewReader(content))
-		require.NoError(t, err)
-
-		all = append(all, chunks...)
-	}
-
-	return all
-}
-
-// listedNewChunkSizes runs `snapshot list --json` and returns each listed
-// snapshot's new_chunk_size by snapshot ID.
-func listedNewChunkSizes(t *testing.T, v *vaultik.Vaultik) map[string]int64 {
-	t.Helper()
-
-	var out bytes.Buffer
-
-	v.Stdout = &out
-	require.NoError(t, v.ListSnapshots(true))
-
-	sizes := make(map[string]int64)
-	for _, row := range decodeListJSON(t, out.String()) {
-		sizes[row.ID] = row.NewChunkSize
-	}
-
-	return sizes
-}

internal/vaultik/nuke_remote_test.go

@@ -1,64 +0,0 @@
-package vaultik_test
-
-import (
-	"context"
-	"io/fs"
-	"os"
-	"path/filepath"
-	"testing"
-
-	"github.com/stretchr/testify/assert"
-	"github.com/stretchr/testify/require"
-	"sneak.berlin/go/vaultik/internal/log"
-	"sneak.berlin/go/vaultik/internal/snapshot"
-)
-
-// TestNukeRemoteLeavesNoFiles checks that remote nuke leaves no file
-// under a file:// destination, including the `.partial` files uploads
-// killed part-way leave next to a snapshot's metadata and next to where a
-// blob would have been.
-func TestNukeRemoteLeavesNoFiles(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	ctx := context.Background()
-	storeDir := filepath.Join(t.TempDir(), "store")
-	v, repos, _ := backUpToFileDestination(ctx, t, storeDir)
-
-	snapshots, err := repos.Snapshots.ListRecent(ctx, listRecentTestLimit)
-	require.NoError(t, err)
-	require.Len(t, snapshots, 1)
-
-	snapshotKey := snapshot.RemoteSnapshotKey(snapshots[0].ID.String())
-	hash := testBlobHashA
-	leftovers := []string{
-		filepath.Join(storeDir, "metadata", snapshotKey,
-			"db.zst.age-123456.partial"),
-		filepath.Join(storeDir, "blobs", hash[:2], hash[2:4],
-			hash+"-123456.partial"),
-	}
-
-	for _, leftover := range leftovers {
-		require.NoError(t, os.MkdirAll(filepath.Dir(leftover), 0o750))
-		require.NoError(t, os.WriteFile(leftover, []byte("half an upload"), 0o600))
-	}
-
-	require.NoError(t, v.NukeRemote(true))
-
-	var files []string
-
-	err = filepath.WalkDir(storeDir,
-		func(path string, entry fs.DirEntry, err error) error {
-			if err != nil {
-				return err
-			}
-
-			if !entry.IsDir() {
-				files = append(files, path)
-			}
-
-			return nil
-		})
-	require.NoError(t, err)
-	assert.Empty(t, files)
-}

internal/vaultik/prune.go

@@ -23,14 +23,9 @@ var errNukeRequiresForce = errors.New(
 // metadata.
 const metadataDirName = "metadata"
 
-// blobKeyParts is the "/"-separated segment count of a blob object key
-// (blobs/<aa>/<bb>/<hash>).
-const blobKeyParts = 4
-
 // NukeRemote deletes every snapshot's metadata and every blob from remote
-// storage, along with any object an upload cut off part-way left under a
+// storage. After this returns successfully the bucket prefix is empty and
-// temporary `.partial` name. After this returns successfully the bucket
+// the next backup starts from scratch.
-// prefix is empty and the next backup starts from scratch.
 //
 // Refuses to run unless force is true. The caller is responsible for
 // confirming with the user.
@@ -53,15 +48,6 @@ func (v *Vaultik) NukeRemote(force bool) error {
 		return fmt.Errorf("pruning blobs: %w", err)
 	}
 
-	// The file and rclone listings skip `.partial` objects, so the two
-	// steps above never delete them.
-	for _, prefix := range []string{"metadata/", "blobs/"} {
-		err = v.Storage.DeletePartialUploads(v.ctx, prefix)
-		if err != nil {
-			return fmt.Errorf("deleting partial uploads: %w", err)
-		}
-	}
-
 	v.UI.Completef("Backup destination store is now empty.")
 
 	return nil

internal/vaultik/prune_count_test.go

@@ -42,7 +42,7 @@ func TestTableCountForReportSurfacesReadFailure(t *testing.T) {
 	assert.Nil(t, missing, "a failed read is unknown, not a count")
 
 	// The rendered count for a failed read must say unknown, never 0.
-	assert.Equal(t, unknownText, countText(missing))
+	assert.Equal(t, countUnknown, countText(missing))
 	assert.NotEqual(t, "0", countText(missing))
 }
 
@@ -57,7 +57,7 @@ func TestCountTextDistinguishesEmptyFromUnknown(t *testing.T) {
 
 	assert.Equal(t, "0", countText(&zero))
 	assert.Equal(t, "7", countText(&seven))
-	assert.Equal(t, unknownText, countText(nil))
+	assert.Equal(t, countUnknown, countText(nil))
 }
 
 // TestCountDiffUnknownWhenEitherSideUnknown checks that a delta computed

internal/vaultik/prune_json_test.go

@@ -1,40 +0,0 @@
-package vaultik_test
-
-import (
-	"encoding/json"
-	"testing"
-
-	"github.com/stretchr/testify/assert"
-	"github.com/stretchr/testify/require"
-	"sneak.berlin/go/vaultik/internal/log"
-	"sneak.berlin/go/vaultik/internal/vaultik"
-)
-
-// TestPruneBlobs_JSONDeletesWithoutAsking checks that prune with --json
-// and without --force deletes an unreferenced blob without the
-// confirmation prompt. Stdin is empty, so a prompt would read no answer
-// and cancel, and its text would come before the JSON document.
-func TestPruneBlobs_JSONDeletesWithoutAsking(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	env := newListEnv(t)
-
-	// The store holds no manifest, so nothing references this blob.
-	addBlob(t, env.store.testStorer, testBlobHashA)
-
-	err := env.v.PruneBlobs(&vaultik.PruneOptions{JSON: true})
-	require.NoError(t, err)
-
-	blobKey := "blobs/" + testBlobHashA[:2] + "/" + testBlobHashA[2:4] +
-		"/" + testBlobHashA
-	assert.False(t, env.store.hasKey(blobKey),
-		"the unreferenced blob must be deleted")
-
-	var result vaultik.PruneBlobsResult
-
-	require.NoError(t, json.Unmarshal(env.stdout.Bytes(), &result),
-		"stdout must hold only the JSON document, got:\n%s",
-		env.stdout.String())
-	assert.Equal(t, 1, result.BlobsDeleted)
-}

internal/vaultik/purge_per_name_test.go

@@ -267,29 +267,6 @@ func TestPurgeOlderThan_WithNameFilter(t *testing.T) {
 	assert.Contains(t, remaining, snapHomeT0)
 }
 
-func TestPurgeOlderThan_TooLargeDeletesNothing(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	snapshotIDs := []string{snapHomeT0, snapHomeT1}
-
-	v := setupPurgeTest(t, snapHostname, snapshotIDs)
-
-	err := v.PurgeSnapshotsWithOptions(&vaultik.SnapshotPurgeOptions{
-		OlderThan: "1000y",
-		Force:     true,
-	})
-	require.Error(t, err)
-
-	err = v.PurgeSnapshotsWithOptions(&vaultik.SnapshotPurgeOptions{
-		OlderThan: "292y",
-		Force:     true,
-	})
-	require.NoError(t, err)
-
-	assert.ElementsMatch(t, snapshotIDs, listRemainingSnapshots(t, v))
-}
-
 func TestPurgeKeepLatest_ThreeNames(t *testing.T) {
 	log.Initialize(log.Config{})
 	t.Parallel()

internal/vaultik/remote_info_test.go

@@ -4,7 +4,6 @@ import (
 	"bytes"
 	"context"
 	"encoding/json"
-	"strings"
 	"testing"
 	"time"
 
@@ -70,74 +69,6 @@ func TestRemoteInfo_UnreadableManifestLeavesOrphansUnknown(t *testing.T) {
 	assert.Equal(t, []any{unreadableKey}, doc["unreadable_manifests"])
 }
 
-// TestRemoteInfo_UnreadableManifestLeavesSnapshotBlobsUnknown checks
-// that the row of a snapshot whose manifest cannot be read gives its
-// blob count and blob size as unknown in the table and as null in
-// --json, not as 0. A directory without a manifest still shows 0: the
-// orphan figures count its blobs as orphaned, so it references none.
-func TestRemoteInfo_UnreadableManifestLeavesSnapshotBlobsUnknown(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	env := newListEnv(t)
-	readableKey := env.addRemote(t, listRemoteID,
-		time.Date(2026, 3, 2, 0, 0, 0, 0, time.UTC))
-
-	unreadableKey := snapshot.RemoteSnapshotKey(listLocalID)
-	require.NoError(t, env.store.Put(context.Background(),
-		"metadata/"+unreadableKey+"/manifest.json.zst",
-		bytes.NewReader([]byte("not a valid manifest"))))
-
-	noManifestKey := snapshot.RemoteSnapshotKey("testhost_home_2026-03-03T10:00:00Z")
-	require.NoError(t, env.store.Put(context.Background(),
-		"metadata/"+noManifestKey+"/db.zst.age",
-		bytes.NewReader([]byte("not a valid database"))))
-
-	require.NoError(t, env.v.RemoteInfo(false))
-
-	// The table truncates the remote key, so a row is found by a prefix.
-	wantUnknown := map[string]int{readableKey: 0, unreadableKey: 2, noManifestKey: 0}
-	for key, want := range wantUnknown {
-		var row string
-
-		for line := range strings.SplitSeq(env.stdout.String(), "\n") {
-			if strings.HasPrefix(line, key[:16]) {
-				row = line
-			}
-		}
-
-		require.NotEmpty(t, row, "no table row for %s", key)
-		assert.Equal(t, want, strings.Count(row, "unknown"), "row: %q", row)
-	}
-
-	env.stdout.Reset()
-	require.NoError(t, env.v.RemoteInfo(true))
-
-	var doc struct {
-		Snapshots []map[string]any `json:"snapshots"`
-	}
-
-	require.NoError(t, json.Unmarshal(env.stdout.Bytes(), &doc))
-	require.Len(t, doc.Snapshots, len(wantUnknown))
-
-	for _, entry := range doc.Snapshots {
-		switch entry["snapshot_id"] {
-		case readableKey:
-			assert.InDelta(t, 1, entry["blob_count"], 0)
-			assert.InDelta(t, fiveMegabytes, entry["blobs_size"], 0)
-		case noManifestKey:
-			assert.InDelta(t, 0, entry["blob_count"], 0)
-			assert.InDelta(t, 0, entry["blobs_size"], 0)
-		default:
-			assert.Equal(t, unreadableKey, entry["snapshot_id"])
-			assert.Contains(t, entry, "blob_count")
-			assert.Nil(t, entry["blob_count"])
-			assert.Contains(t, entry, "blobs_size")
-			assert.Nil(t, entry["blobs_size"])
-		}
-	}
-}
-
 // TestRemoteInfo_SkipsNonConformingMetadataName checks that a directory
 // under metadata/ whose name is not a remote key is left out of the
 // report, and that the orphan figures are unknown when it holds a
@@ -185,39 +116,6 @@ func TestRemoteInfo_SkipsNonConformingMetadataName(t *testing.T) {
 	assert.NotContains(t, doc, "unreadable_manifests")
 }
 
-// TestRemoteInfo_DoesNotCountNonBlobFileUnderBlobs checks that a file
-// under blobs/ whose name is not a blob hash is not counted as a blob.
-// prune never deletes such a file, so counting it as an orphaned blob
-// would advise a prune that removes nothing.
-func TestRemoteInfo_DoesNotCountNonBlobFileUnderBlobs(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	env := newListEnv(t)
-	env.addRemote(t, listRemoteID, time.Date(2026, 3, 2, 0, 0, 0, 0, time.UTC))
-	addBlob(t, env.store.testStorer, testBlobHashA)
-	require.NoError(t, env.store.Put(context.Background(),
-		"blobs/"+testBlobHashA[:2]+"/"+testBlobHashA[2:4]+"/.DS_Store",
-		bytes.NewReader([]byte("junk"))))
-
-	require.NoError(t, env.v.RemoteInfo(false))
-
-	text := env.stdout.String()
-	assert.Contains(t, text, "Total blobs on remote:      1 (")
-	assert.Contains(t, text, "Orphaned (unreferenced):    0 (")
-	assert.NotContains(t, text, "vaultik prune")
-
-	env.stdout.Reset()
-	require.NoError(t, env.v.RemoteInfo(true))
-
-	var doc map[string]any
-
-	require.NoError(t, json.Unmarshal(env.stdout.Bytes(), &doc))
-	assert.InDelta(t, 1, doc["total_blob_count"], 0)
-	assert.InDelta(t, 0, doc["orphaned_blob_count"], 0)
-	assert.InDelta(t, 0, doc["orphaned_blob_size"], 0)
-}
-
 // TestRemoteInfo_DirectoryWithoutManifestLeavesOrphansKnown checks that
 // a directory under metadata/ holding no manifest.json.zst, such as one
 // left by a backup interrupted before its manifest upload, leaves the

internal/vaultik/remove_snapshot_test.go

@@ -3,21 +3,17 @@ package vaultik_test
 import (
 	"bytes"
 	"context"
-	"database/sql"
 	"io"
 	"strings"
 	"sync"
 	"testing"
-	"time"
 
 	"github.com/klauspost/compress/zstd"
 	"github.com/stretchr/testify/assert"
 	"github.com/stretchr/testify/require"
-	"sneak.berlin/go/vaultik/internal/database"
 	"sneak.berlin/go/vaultik/internal/log"
 	"sneak.berlin/go/vaultik/internal/snapshot"
 	"sneak.berlin/go/vaultik/internal/storage"
-	"sneak.berlin/go/vaultik/internal/types"
 	"sneak.berlin/go/vaultik/internal/vaultik"
 )
 
@@ -129,12 +125,6 @@ func (s *testStorer) ListStream(
 	return ch
 }
 
-// DeletePartialUploads has nothing to remove: Put stores each object
-// under its key at once.
-func (s *testStorer) DeletePartialUploads(_ context.Context, _ string) error {
-	return nil
-}
-
 func (s *testStorer) Info() storage.Info {
 	return storage.Info{
 		Type:     testLabel,
@@ -218,37 +208,6 @@ func addBlob(t *testing.T, store *testStorer, hash string) {
 	require.NoError(t, err)
 }
 
-// newLocalIndex returns an in-memory local index holding a completed
-// snapshot row for each of ids.
-func newLocalIndex(t *testing.T, ids ...string) *database.Repositories {
-	t.Helper()
-
-	ctx := context.Background()
-
-	db, err := database.New(ctx, ":memory:")
-	require.NoError(t, err)
-	t.Cleanup(func() { _ = db.Close() })
-
-	repos := database.NewRepositories(db)
-
-	for _, id := range ids {
-		completedAt := time.Now().UTC()
-		snap := &database.Snapshot{
-			ID:          types.SnapshotID(id),
-			Hostname:    snapHostname,
-			StartedAt:   completedAt,
-			CompletedAt: &completedAt,
-		}
-
-		err = repos.WithTx(ctx, func(ctx context.Context, tx *sql.Tx) error {
-			return repos.Snapshots.Create(ctx, tx, snap)
-		})
-		require.NoError(t, err)
-	}
-
-	return repos
-}
-
 // ============================================================================
 // Unit Tests for RemoveSnapshot
 // ============================================================================
@@ -268,7 +227,6 @@ func TestRemoveSnapshot_LocalOnly_PreservesRemote(t *testing.T) {
 	addBlob(t, store, blobA)
 
 	tv := vaultik.NewForTesting(store)
-	tv.Repositories = newLocalIndex(t, "snapshot-001")
 
 	opts := &vaultik.RemoveOptions{Force: true, LocalOnly: true}
 	result, err := tv.RemoveSnapshot("snapshot-001", opts)
@@ -304,7 +262,6 @@ func TestRemoveSnapshot_DefaultRemovesMetadataNotBlobs(t *testing.T) {
 	addBlob(t, store, blobShared)
 
 	tv := vaultik.NewForTesting(store)
-	tv.Repositories = newLocalIndex(t, "snapshot-001", "snapshot-002")
 
 	opts := &vaultik.RemoveOptions{Force: true}
 	result, err := tv.RemoveSnapshot("snapshot-001", opts)
@@ -353,84 +310,6 @@ func TestRemoveSnapshot_DryRun(t *testing.T) {
 	assert.Contains(t, tv.Stdout.String(), "[Dry run - no changes made]")
 }
 
-// TestRemoveSnapshot_UnknownIDIsError checks that an ID naming no
-// snapshot in the local index or on the destination store is an error
-// under every option, and that nothing is reported as removed.
-func TestRemoveSnapshot_UnknownIDIsError(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	for name, opts := range map[string]vaultik.RemoveOptions{
-		"force":      {Force: true},
-		"json":       {JSON: true},
-		"dry-run":    {Force: true, DryRun: true},
-		"local-only": {Force: true, LocalOnly: true},
-	} {
-		t.Run(name, func(t *testing.T) {
-			t.Parallel()
-
-			store := newTestStorer()
-			addManifest(t, store, "snapshot-001", nil)
-
-			tv := vaultik.NewForTesting(store)
-			tv.Repositories = newLocalIndex(t, "snapshot-001")
-
-			result, err := tv.RemoveSnapshot("snapshot-999", &opts)
-
-			require.ErrorContains(t, err, "snapshot not found")
-			assert.False(t, result.RemoteRemoved)
-			assert.Empty(t, tv.Stdout.String())
-			assert.True(t, store.hasKey(remoteKeyPath("snapshot-001")))
-		})
-	}
-}
-
-// TestRemoveSnapshot_NoMetadataOnDestination checks that removing a
-// snapshot whose metadata is not on the destination store does not
-// report metadata removed from it.
-func TestRemoveSnapshot_NoMetadataOnDestination(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	tv := vaultik.NewForTesting(newTestStorer())
-	tv.Repositories = newLocalIndex(t, "snapshot-001")
-
-	result, err := tv.RemoveSnapshot("snapshot-001",
-		&vaultik.RemoveOptions{Force: true})
-
-	require.NoError(t, err)
-	assert.False(t, result.RemoteRemoved)
-
-	out := tv.Stdout.String()
-	assert.Contains(t, out, "Removed snapshot 'snapshot-001' from local database")
-	assert.NotContains(t, out, "Removed snapshot metadata from remote storage")
-}
-
-// TestRemoveSnapshot_NotInLocalIndex checks that removing a snapshot
-// only the destination store holds removes its metadata there without
-// reporting a removal from the local database.
-func TestRemoveSnapshot_NotInLocalIndex(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	store := newTestStorer()
-	addManifest(t, store, "snapshot-001", nil)
-
-	tv := vaultik.NewForTesting(store)
-	tv.Repositories = newLocalIndex(t)
-
-	result, err := tv.RemoveSnapshot("snapshot-001",
-		&vaultik.RemoveOptions{Force: true})
-
-	require.NoError(t, err)
-	assert.True(t, result.RemoteRemoved)
-	assert.False(t, store.hasKey(remoteKeyPath("snapshot-001")))
-
-	out := tv.Stdout.String()
-	assert.NotContains(t, out, "from local database")
-	assert.Contains(t, out, "Removed snapshot metadata from remote storage")
-}
-
 func TestRemoveAllSnapshots_RequiresForce(t *testing.T) {
 	log.Initialize(log.Config{})
 	t.Parallel()

internal/vaultik/restore.go

@@ -103,12 +103,11 @@ type RestoreResult struct {
 	BlobsDownloaded int
 	BytesDownloaded int64
 	Duration        time.Duration
-	FilesFailed     int
-	FailedFiles     []string // Paths of files that failed to restore
 	// Verification results (only populated if Verify option is set)
-	FilesVerified     int
+	FilesVerified int
-	BytesVerified     int64
+	BytesVerified int64
-	VerifyFailedFiles []string // Paths of restored files that failed verification
+	FilesFailed   int
+	FailedFiles   []string // Paths of files that failed verification
 }
 
 // Restore restores files from a snapshot to the target directory
@@ -310,22 +309,11 @@ func (v *Vaultik) restoreAllFiles(
 		return nil, err
 	}
 
-	plan, unplanned, err := newRestorePlan(
+	plan, err := newRestorePlan(v.ctx, repos, files, chunkToBlobMap, blobIDToHash)
-		v.ctx, repos, files, chunkToBlobMap, blobIDToHash)
 	if err != nil {
 		return nil, fmt.Errorf("building restore plan: %w", err)
 	}
 
-	// Ranging over files rather than the map reports them in a stable order.
-	for _, file := range files {
-		if planErr, ok := unplanned[file.ID]; ok {
-			err = v.handleRestoreFileError(plan, opts, result, file, file.ID, planErr)
-			if err != nil {
-				return nil, err
-			}
-		}
-	}
-
 	filesByID, totalBytesExpected := indexRestoreFiles(files)
 
 	v.UI.Beginf("Restoring %s files (%s) to %s.",
@@ -659,34 +647,20 @@ func (v *Vaultik) handleRestoreVerification(
 	opts *RestoreOptions,
 	result *RestoreResult,
 ) error {
-	// A file that failed to restore was not written and is already
+	err := v.verifyRestoredFiles(v.ctx, repos, files, opts.TargetDir, result)
-	// reported as such, so it is not verified.
-	failedToRestore := make(map[string]bool, len(result.FailedFiles))
-	for _, path := range result.FailedFiles {
-		failedToRestore[path] = true
-	}
-
-	restored := make([]*database.File, 0, len(files))
-	for _, file := range files {
-		if !failedToRestore[file.Path.String()] {
-			restored = append(restored, file)
-		}
-	}
-
-	err := v.verifyRestoredFiles(v.ctx, repos, restored, opts.TargetDir, result)
 	if err != nil {
 		return fmt.Errorf("verification failed: %w", err)
 	}
 
-	if len(result.VerifyFailedFiles) > 0 {
+	if result.FilesFailed > 0 {
 		v.UI.Errorf("Verification failed: %s files did not match expected checksums.",
-			v.UI.Count(len(result.VerifyFailedFiles)))
+			v.UI.Count(result.FilesFailed))
 
-		for _, path := range result.VerifyFailedFiles {
+		for _, path := range result.FailedFiles {
 			v.UI.Detailf("%s", v.UI.Path(path))
 		}
 
-		return fmt.Errorf("%d %w", len(result.VerifyFailedFiles), errFilesFailedVerify)
+		return fmt.Errorf("%d %w", result.FilesFailed, errFilesFailedVerify)
 	}
 
 	v.UI.Completef("Verified %s files (%s).",
@@ -1446,8 +1420,8 @@ func (v *Vaultik) verifyRestoredFiles(
 		if err != nil {
 			log.Error("File verification failed", "path", file.Path, "error", err)
 
-			result.VerifyFailedFiles = append(
+			result.FilesFailed++
-				result.VerifyFailedFiles, file.Path.String())
+			result.FailedFiles = append(result.FailedFiles, file.Path.String())
 		}
 
 		bytesProcessed += file.Size
@@ -1463,7 +1437,7 @@ func (v *Vaultik) verifyRestoredFiles(
 	log.Info("Verification complete",
 		"files_verified", result.FilesVerified,
 		"bytes_verified", ubytes(result.BytesVerified),
-		"files_failed", len(result.VerifyFailedFiles),
+		"files_failed", result.FilesFailed,
 	)
 
 	return nil

internal/vaultik/restore_interrupt_test.go

@@ -142,14 +142,14 @@ func TestRestoreCleansTempDirOnInterrupt(t *testing.T) {
 }
 
 // scratchEntries returns the vaultik blob-cache and snapshot-database
-// scratch entries (restore's and deep verify's) currently present in dir.
+// scratch entries currently present in dir.
 func scratchEntries(t *testing.T, dir string) []string {
 	t.Helper()
 
 	var matches []string
 
 	for _, pattern := range []string{
-		"vaultik-blobcache-*", "vaultik-restore-*", "vaultik-verify-*",
+		"vaultik-blobcache-*", "vaultik-restore-*",
 	} {
 		found, err := filepath.Glob(filepath.Join(dir, pattern))
 		require.NoError(t, err)
@@ -206,119 +206,3 @@ func TestRestoreSkipErrorsCancelDuringBlobDownload(t *testing.T) {
 	assert.NotContains(t, out.String(), srcPath,
 		"the cancel was reported as a failed file")
 }
-
-// stallingBlobStorer wraps a Storer so that every blob download hands
-// over the first half of the blob and then stalls, ignoring the context,
-// as a file:// blob on a hung USB stick or network share does. Only
-// closing the returned reader ends the stall.
-type stallingBlobStorer struct {
-	storage.Storer
-
-	once    sync.Once
-	stalled chan struct{}
-}
-
-func newStallingBlobStorer(inner storage.Storer) *stallingBlobStorer {
-	return &stallingBlobStorer{Storer: inner, stalled: make(chan struct{})}
-}
-
-func (s *stallingBlobStorer) Get(
-	ctx context.Context, key string,
-) (io.ReadCloser, error) {
-	rc, err := s.Storer.Get(ctx, key)
-	if err != nil || !strings.HasPrefix(key, "blobs/") {
-		return rc, err
-	}
-
-	blob, err := io.ReadAll(rc)
-	_ = rc.Close()
-
-	if err != nil {
-		return nil, err
-	}
-
-	// The writer is never closed, so once the first half has been read
-	// the next Read blocks until the reader is closed.
-	pr, pw := io.Pipe()
-
-	go func() {
-		_, _ = pw.Write(blob[:len(blob)/2])
-
-		s.once.Do(func() { close(s.stalled) })
-	}()
-
-	return pr, nil
-}
-
-// TestInterruptDuringStalledBlobReadCleansTempDir stops a restore and a
-// deep verify while a blob read is stalled on a source that ignores the
-// context. Stopping must end that read, so the operation unwinds and
-// removes its decrypted scratch files well within the shutdown timeout
-// (issue #325).
-//
-// Not parallel: it points TMPDIR at a private directory (via t.Setenv)
-// so it can assert on exactly the scratch files the operation created.
-func TestInterruptDuringStalledBlobReadCleansTempDir(t *testing.T) {
-	log.Initialize(log.Config{})
-
-	operations := map[string]func(v *Vaultik, snapshotID, targetDir string) error{
-		"restore": func(v *Vaultik, snapshotID, targetDir string) error {
-			return v.Restore(&RestoreOptions{
-				SnapshotID: snapshotID,
-				TargetDir:  targetDir,
-			})
-		},
-		"deep verify": func(v *Vaultik, snapshotID, _ string) error {
-			return v.RunDeepVerify(snapshotID, &VerifyOptions{Deep: true})
-		},
-	}
-
-	for name, op := range operations {
-		t.Run(name, func(t *testing.T) {
-			fs := afero.NewOsFs()
-			root := t.TempDir()
-
-			// Random content, so the blob stays large enough to stall
-			// part-way through its compressed, encrypted body.
-			cfg, storer, snapshotID, _ := backupOneFile(context.Background(),
-				t, fs, root, "a.bin", randomBytes(t, 256*1024), 0o644)
-
-			scratch := filepath.Join(root, "scratch")
-			require.NoError(t, fs.MkdirAll(scratch, 0o755))
-			t.Setenv("TMPDIR", scratch)
-
-			stalling := newStallingBlobStorer(storer)
-
-			ctx, cancel := context.WithCancel(context.Background())
-			defer cancel()
-
-			v := newRestoreVaultik(ctx, cfg, stalling, fs)
-			v.cancel = cancel
-
-			var opErr error
-
-			stop := v.StartOperation(func() {
-				opErr = op(v, snapshotID, filepath.Join(root, "restored"))
-			})
-
-			select {
-			case <-stalling.stalled:
-			case <-time.After(30 * time.Second):
-				t.Fatal("the operation never reached a blob read")
-			}
-
-			require.NotEmpty(t, scratchEntries(t, scratch),
-				"expected decrypted scratch files to exist mid-read")
-
-			stopCtx, stopCancel := context.WithTimeout(
-				context.Background(), 10*time.Second)
-			defer stopCancel()
-
-			require.True(t, stop(stopCtx),
-				"stop timed out; the stalled blob read was not interrupted")
-			require.ErrorIs(t, opErr, context.Canceled)
-			require.Empty(t, scratchEntries(t, scratch),
-				"decrypted scratch files remained after the interrupt")
-		})
-	}
-}

internal/vaultik/restore_malformed_db_test.go

@@ -61,8 +61,8 @@ func craftedFile(
 }
 
 // TestRestoreShortChunkHashInNoBlob proves a file whose short chunk hash
-// has no blob_chunks row is left out of the restore plan with an error,
+// has no blob_chunks row fails restore planning and the chunk write with
-// and fails the chunk write with an error.
+// an error.
 func TestRestoreShortChunkHashInNoBlob(t *testing.T) {
 	t.Parallel()
 
@@ -77,11 +77,9 @@ func TestRestoreShortChunkHashInNoBlob(t *testing.T) {
 	chunkToBlobMap, err := v.buildChunkToBlobMap(ctx, repos)
 	require.NoError(t, err)
 
-	plan, unplanned, err := newRestorePlan(ctx, repos, []*database.File{file},
+	_, err = newRestorePlan(ctx, repos, []*database.File{file},
 		chunkToBlobMap, map[string]string{})
-	require.NoError(t, err)
+	require.ErrorIs(t, err, errPlanChunkMissing)
-	require.ErrorIs(t, unplanned[file.ID], errPlanChunkMissing)
-	require.False(t, plan.hasPending())
 
 	fileChunks, err := repos.FileChunks.GetByFileID(ctx, file.ID)
 	require.NoError(t, err)

internal/vaultik/restore_plan.go

@@ -41,25 +41,20 @@ type restorePlan struct {
 
 // newRestorePlan builds the file→blob index for the given files. Files
 // whose chunks reference no blobs (symlinks, directories) start in the
-// ready queue immediately. A file with a chunk that no blob holds cannot
+// ready queue immediately.
-// be restored: it is left out of the plan and returned, by ID, with the
-// reason.
 func newRestorePlan(
 	ctx context.Context,
 	repos *database.Repositories,
 	files []*database.File,
 	chunkToBlobMap map[string]*database.BlobChunk,
 	blobIDToHash map[string]string,
-) (*restorePlan, map[types.FileID]error, error) {
+) (*restorePlan, error) {
 	p := &restorePlan{
 		fileBlobs: make(map[types.FileID]map[string]struct{}, len(files)),
 		blobFiles: make(map[string]map[types.FileID]struct{}),
 		ready:     make([]types.FileID, 0, len(files)),
 		cached:    make(map[string]struct{}),
 	}
-	unplanned := make(map[types.FileID]error)
-
-nextFile:
 	for _, f := range files {
 		if f.IsSymlink() || f.Mode&uint32(os.ModeDir) != 0 {
 			// No chunks to fetch — restore can run immediately.
@@ -71,7 +66,7 @@ nextFile:
 
 		fileChunks, err := repos.FileChunks.GetByFileID(ctx, f.ID)
 		if err != nil {
-			return nil, nil, fmt.Errorf("planning %s: %w", f.Path, err)
+			return nil, fmt.Errorf("planning %s: %w", f.Path, err)
 		}
 
 		blobs := make(map[string]struct{})
@@ -79,18 +74,14 @@ nextFile:
 		for _, fc := range fileChunks {
 			bc, ok := chunkToBlobMap[fc.ChunkHash.String()]
 			if !ok {
-				unplanned[f.ID] = fmt.Errorf("%w: %s",
+				return nil, fmt.Errorf("planning %s: %w: %s",
-					errPlanChunkMissing, shortHash(fc.ChunkHash.String()))
+					f.Path, errPlanChunkMissing, shortHash(fc.ChunkHash.String()))
-
-				continue nextFile
 			}
 
 			hash, ok := blobIDToHash[bc.BlobID.String()]
 			if !ok {
-				unplanned[f.ID] = fmt.Errorf("%w: %s",
+				return nil, fmt.Errorf("planning %s: %w: %s",
-					errPlanBlobIDMissing, bc.BlobID)
+					f.Path, errPlanBlobIDMissing, bc.BlobID)
-
-				continue nextFile
 			}
 
 			blobs[hash] = struct{}{}
@@ -112,7 +103,7 @@ nextFile:
 		}
 	}
 
-	return p, unplanned, nil
+	return p, nil
 }
 
 // markBlobCached records that the named blob is now resident in the

internal/vaultik/restore_skip_errors_test.go

@@ -4,9 +4,7 @@ import (
 	"bytes"
 	"context"
 	"fmt"
-	"os"
 	"path/filepath"
-	"strings"
 	"testing"
 
 	"github.com/spf13/afero"
@@ -30,8 +28,7 @@ const (
 )
 
 // missingBlobBackup is a snapshot of single-chunk files spread over two
-// blobs, with one of those blobs lost: deleted from the store, or missing
+// blobs, with one of those blobs deleted from the store.
-// from the snapshot metadata.
 type missingBlobBackup struct {
 	fs         afero.Fs
 	cfg        *config.Config
@@ -40,39 +37,20 @@ type missingBlobBackup struct {
 	restoreDir string
 	// files holds the original content by source path.
 	files map[string][]byte
-	// lost holds the source paths whose chunk is in the lost blob.
+	// lost holds the source paths whose chunk is in the deleted blob.
 	lost map[string]bool
 }
 
 // TestRestoreSkipErrorsSkipsFilesOfMissingBlob restores with SkipErrors
-// after one blob of a two-blob snapshot was deleted from the store.
+// after one blob of a two-blob snapshot was deleted. Every file stored in
+// that blob must be reported as failed and left absent, every other file
+// must be restored intact, and Restore must still return an error.
 func TestRestoreSkipErrorsSkipsFilesOfMissingBlob(t *testing.T) {
 	log.Initialize(log.Config{})
 	t.Parallel()
 
 	ctx := context.Background()
-	assertRestoreSkipsLostFiles(ctx, t, backupThenDeleteOneBlob(ctx, t))
+	backup := backupThenDeleteOneBlob(ctx, t)
-}
-
-// TestRestoreSkipErrorsSkipsFilesWithChunkInNoBlob restores with
-// SkipErrors a snapshot whose metadata lists chunks that no blob holds, as
-// earlier backup defects left behind.
-func TestRestoreSkipErrorsSkipsFilesWithChunkInNoBlob(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	ctx := context.Background()
-	assertRestoreSkipsLostFiles(ctx, t, backupThenDropOneBlobFromMetadata(ctx, t))
-}
-
-// assertRestoreSkipsLostFiles restores backup with SkipErrors. Every file
-// stored in the lost blob must be reported as failed and left absent,
-// every other file must be restored intact, and Restore must still return
-// an error.
-func assertRestoreSkipsLostFiles(
-	ctx context.Context, t *testing.T, backup *missingBlobBackup,
-) {
-	t.Helper()
 
 	var out bytes.Buffer
 
@@ -94,142 +72,18 @@ func assertRestoreSkipsLostFiles(
 
 		if backup.lost[path] {
 			assert.Containsf(t, out.String(), path,
-				"%s needs the lost blob and must be reported", path)
+				"%s needs the deleted blob and must be reported", path)
 			assert.NoFileExists(t, restored)
 
 			continue
 		}
 
 		got, err := afero.ReadFile(backup.fs, restored)
-		require.NoErrorf(t, err, "%s does not need the lost blob", path)
+		require.NoErrorf(t, err, "%s does not need the deleted blob", path)
 		assert.Equalf(t, content, got, "%s restored with wrong content", path)
 	}
 }
 
-// TestRestoreSkipErrorsVerifyChecksOnlyRestoredFiles restores with
-// SkipErrors and Verify after one blob of a two-blob snapshot was
-// deleted. Verification must check only the files that were written, so
-// a file of the deleted blob is reported as failed to restore and not
-// also as failing verification, and Restore must still return an error.
-func TestRestoreSkipErrorsVerifyChecksOnlyRestoredFiles(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	ctx := context.Background()
-	backup := backupThenDeleteOneBlob(ctx, t)
-
-	var out bytes.Buffer
-
-	v := newReaderVaultik(ctx, backup.cfg, backup.storer, nil, backup.fs)
-	v.UI = ui.NewWithColor(&out, false)
-
-	err := v.Restore(&vaultik.RestoreOptions{
-		SnapshotID: backup.snapshotID,
-		TargetDir:  backup.restoreDir,
-		Verify:     true,
-		SkipErrors: true,
-	})
-
-	require.Error(t, err, "restore must fail when files were skipped")
-	assert.Contains(t, err.Error(),
-		fmt.Sprintf("%d file(s) failed to restore", len(backup.lost)))
-
-	written := len(backup.files) - len(backup.lost)
-
-	assert.Contains(t, out.String(), fmt.Sprintf("Verifying %d files", written))
-	assert.Contains(t, out.String(), fmt.Sprintf("Verified %d files", written))
-	assert.NotContains(t, out.String(), "Verification failed")
-}
-
-// TestRestoreSkipErrorsVerifyReportsFailuresApart restores with
-// SkipErrors and Verify after one blob of a two-blob snapshot was
-// deleted, while one file that does restore is written one byte too long.
-// The restore warning must list only the files of the deleted blob, the
-// verification summary only the long file, each path once, and Restore
-// must return an error.
-func TestRestoreSkipErrorsVerifyReportsFailuresApart(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	ctx := context.Background()
-	backup := backupThenDeleteOneBlob(ctx, t)
-
-	var long string
-
-	for path := range backup.files {
-		if !backup.lost[path] {
-			long = path
-
-			break
-		}
-	}
-
-	var out bytes.Buffer
-
-	fs := trailingByteFs{Fs: backup.fs, suffix: long}
-	v := newReaderVaultik(ctx, backup.cfg, backup.storer, nil, fs)
-	v.UI = ui.NewWithColor(&out, false)
-
-	err := v.Restore(&vaultik.RestoreOptions{
-		SnapshotID: backup.snapshotID,
-		TargetDir:  backup.restoreDir,
-		Verify:     true,
-		SkipErrors: true,
-	})
-	require.Error(t, err, "restore must fail when files failed")
-
-	_, afterWarning, found := strings.Cut(out.String(),
-		fmt.Sprintf("%d file(s) failed to restore:", len(backup.lost)))
-	require.Truef(t, found, "no restore warning in:\n%s", out.String())
-
-	warning, summary, found := strings.Cut(afterWarning,
-		"Verification failed: 1 files did not match")
-	require.Truef(t, found, "no verification summary in:\n%s", out.String())
-
-	for path := range backup.lost {
-		assert.Equalf(t, 1, strings.Count(warning, path),
-			"%s must be listed once as failed to restore", path)
-		assert.NotContainsf(t, summary, path,
-			"%s was not restored and must not fail verification", path)
-	}
-
-	assert.NotContainsf(t, warning, long,
-		"%s was restored and must not be listed as failed to restore", long)
-	assert.Equalf(t, 1, strings.Count(summary, long),
-		"%s must be listed once as failing verification", long)
-}
-
-// trailingByteFs appends one byte, on close, to the file it opens whose
-// path ends in suffix, so that file is restored one byte too long and
-// fails verification.
-type trailingByteFs struct {
-	afero.Fs
-
-	suffix string
-}
-
-//nolint:ireturn // afero.Fs.OpenFile is defined to return the interface
-func (fs trailingByteFs) OpenFile(
-	name string, flag int, perm os.FileMode,
-) (afero.File, error) {
-	f, err := fs.Fs.OpenFile(name, flag, perm)
-	if err != nil || !strings.HasSuffix(name, fs.suffix) {
-		return f, err
-	}
-
-	return trailingByteFile{File: f}, nil
-}
-
-type trailingByteFile struct {
-	afero.File
-}
-
-func (f trailingByteFile) Close() error {
-	_, _ = f.Write([]byte{'x'})
-
-	return f.File.Close()
-}
-
 // TestRestoreMissingBlobAbortsWithoutSkipErrors checks that a deleted blob
 // still ends the restore with an error when SkipErrors is not set.
 func TestRestoreMissingBlobAbortsWithoutSkipErrors(t *testing.T) {
@@ -249,30 +103,6 @@ func TestRestoreMissingBlobAbortsWithoutSkipErrors(t *testing.T) {
 	require.ErrorIs(t, err, storage.ErrNotFound)
 }
 
-// TestRestoreChunkInNoBlobAbortsWithoutSkipErrors checks that a chunk held
-// by no blob still ends the restore, before any file is written, when
-// SkipErrors is not set.
-func TestRestoreChunkInNoBlobAbortsWithoutSkipErrors(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	ctx := context.Background()
-	backup := backupThenDropOneBlobFromMetadata(ctx, t)
-
-	v := newReaderVaultik(ctx, backup.cfg, backup.storer, nil, backup.fs)
-
-	err := v.Restore(&vaultik.RestoreOptions{
-		SnapshotID: backup.snapshotID,
-		TargetDir:  backup.restoreDir,
-	})
-
-	require.ErrorContains(t, err, "chunk missing from blob map")
-
-	for path := range backup.files {
-		assert.NoFileExists(t, filepath.Join(backup.restoreDir, path))
-	}
-}
-
 // backupThenDeleteOneBlob backs up missingBlobFileCount single-chunk
 // files, then deletes from the store the blob holding the first of them.
 func backupThenDeleteOneBlob(
@@ -280,54 +110,6 @@ func backupThenDeleteOneBlob(
 ) *missingBlobBackup {
 	t.Helper()
 
-	backup, db, lostBlob := backupSingleChunkFiles(ctx, t)
-	require.NoError(t, db.Close())
-
-	require.NoError(t, backup.storer.Delete(ctx, fmt.Sprintf(
-		"blobs/%s/%s/%s", lostBlob[:2], lostBlob[2:4], lostBlob)))
-
-	return backup
-}
-
-// backupThenDropOneBlobFromMetadata backs up missingBlobFileCount
-// single-chunk files, then removes the blob holding the first of them from
-// the snapshot and exports the snapshot metadata again. The exported
-// metadata then lists chunks that no blob holds.
-func backupThenDropOneBlobFromMetadata(
-	ctx context.Context, t *testing.T,
-) *missingBlobBackup {
-	t.Helper()
-
-	backup, db, lostBlob := backupSingleChunkFiles(ctx, t)
-
-	// The uploads row refers to the blob row, so it would keep the export
-	// from deleting it.
-	for _, query := range []string{
-		"DELETE FROM snapshot_blobs WHERE blob_hash = ?",
-		"DELETE FROM uploads WHERE blob_hash = ?",
-	} {
-		_, err := db.Conn().ExecContext(ctx, query, lostBlob)
-		require.NoError(t, err)
-	}
-
-	sm := newFaultSnapshotManager(
-		backup.fs, backup.storer, backup.cfg, database.NewRepositories(db))
-	require.NoError(t,
-		sm.ExportSnapshotMetadata(ctx, db.Path(), backup.snapshotID))
-	require.NoError(t, db.Close())
-
-	return backup
-}
-
-// backupSingleChunkFiles backs up missingBlobFileCount single-chunk files.
-// It returns the backup, with lost naming the files stored in the same
-// blob as the first of them, the still open local index, and the hash of
-// that blob.
-func backupSingleChunkFiles(
-	ctx context.Context, t *testing.T,
-) (*missingBlobBackup, *database.DB, string) {
-	t.Helper()
-
 	fs := afero.NewOsFs()
 	tempDir := t.TempDir()
 	dataDir := filepath.Join(tempDir, "src")
@@ -361,11 +143,16 @@ func backupSingleChunkFiles(
 		blobOfFile[path] = blobHashOfSingleChunkFile(ctx, t, repos, path)
 	}
 
-	lostBlob := blobOfFile[filepath.Join(dataDir, "file-00.bin")]
+	require.NoError(t, db.Close())
+
+	deleted := blobOfFile[filepath.Join(dataDir, "file-00.bin")]
+	require.NoError(t, storer.Delete(ctx, fmt.Sprintf(
+		"blobs/%s/%s/%s", deleted[:2], deleted[2:4], deleted)))
+
 	lost := make(map[string]bool)
 
 	for path, hash := range blobOfFile {
-		if hash == lostBlob {
+		if hash == deleted {
 			lost[path] = true
 		}
 	}
@@ -381,7 +168,7 @@ func backupSingleChunkFiles(
 		restoreDir: filepath.Join(tempDir, "restored"),
 		files:      files,
 		lost:       lost,
-	}, db, lostBlob
+	}
 }
 
 // blobHashOfSingleChunkFile returns the hash of the blob holding the one

internal/vaultik/snapshot.go

@@ -23,19 +23,12 @@ var (
 	errNoSnapshotsInConfig  = errors.New("no snapshots configured")
 	errSnapshotVerifyFailed = errors.New("verification failed")
 	errRemoveAllNeedsForce  = errors.New("--all requires --force")
-	errSnapshotNotFound     = errors.New("snapshot not found")
 	errInvalidTableName     = errors.New("invalid table name")
 	errNoAgeRecipients      = errors.New(
 		"creating a snapshot needs at least one public key in " +
 			"age_recipients (generate a keypair with: age-keygen)")
-	errKeepNewerThanNeedsPrune = errors.New("--keep-newer-than requires --prune")
 )
 
-// ErrPostBackupPruneFailed wraps a failure of the post-backup prune,
-// which runs only after every snapshot was created and uploaded, so the
-// caller can report it apart from a failed backup.
-var ErrPostBackupPruneFailed = errors.New("post-backup prune failed")
-
 // listRecentLimit caps how many snapshot rows are fetched from the
 // local index for listing and purge operations.
 const listRecentLimit = 10000
@@ -51,26 +44,6 @@ type SnapshotCreateOptions struct {
 	Snapshots     []string // Optional list of snapshot names to process (empty = all)
 }
 
-// Validate fails when KeepNewerThan is set without Prune or is not a
-// valid duration. Only the post-backup prune reads KeepNewerThan, after
-// the backup, so the caller checks it before starting one.
-func (opts *SnapshotCreateOptions) Validate() error {
-	if opts.KeepNewerThan == "" {
-		return nil
-	}
-
-	if !opts.Prune {
-		return errKeepNewerThanNeedsPrune
-	}
-
-	_, err := parseDuration(opts.KeepNewerThan)
-	if err != nil {
-		return fmt.Errorf("--keep-newer-than: %w", err)
-	}
-
-	return nil
-}
-
 // CreateSnapshot executes the snapshot creation operation
 func (v *Vaultik) CreateSnapshot(opts *SnapshotCreateOptions) error {
 	// config.Load accepts an empty list, since listing, verifying and
@@ -149,7 +122,7 @@ func (v *Vaultik) CreateSnapshot(opts *SnapshotCreateOptions) error {
 	if opts.Prune {
 		err = v.runPostBackupPrune(snapshotNames, opts.KeepNewerThan)
 		if err != nil {
-			return fmt.Errorf("%w: %w", ErrPostBackupPruneFailed, err)
+			return fmt.Errorf("post-backup prune: %w", err)
 		}
 	}
 
@@ -209,11 +182,9 @@ type snapshotStats struct {
 	totalFiles         int
 	totalBytes         int64
 	totalChunks        int
-	newChunkSize       int64
 	totalBlobs         int
 	totalBytesSkipped  int64
 	totalFilesSkipped  int
-	totalFilesFailed   int
 	totalFilesDeleted  int
 	totalBytesDeleted  int64
 	totalBytesUploaded int64
@@ -342,10 +313,8 @@ func (v *Vaultik) scanAllDirectories(
 		stats.totalFiles += result.FilesScanned
 		stats.totalBytes += result.BytesScanned
 		stats.totalChunks += result.ChunksCreated
-		stats.newChunkSize += result.NewChunkSize
 		stats.totalBlobs += result.BlobsCreated
 		stats.totalFilesSkipped += result.FilesSkipped
-		stats.totalFilesFailed += result.FilesFailed
 		stats.totalBytesSkipped += result.BytesSkipped
 		stats.totalFilesDeleted += result.FilesDeleted
 		stats.totalBytesDeleted += result.BytesDeleted
@@ -357,7 +326,6 @@ func (v *Vaultik) scanAllDirectories(
 			"path", dir,
 			"files", result.FilesScanned,
 			"files_skipped", result.FilesSkipped,
-			"files_failed", result.FilesFailed,
 			"bytes", result.BytesScanned,
 			"bytes_skipped", result.BytesSkipped,
 			"chunks", result.ChunksCreated,
@@ -391,11 +359,9 @@ func (v *Vaultik) finalizeSnapshotMetadata(
 		return fmt.Errorf("getting snapshot blob sizes: %w", err)
 	}
 
-	// file_count and total_size leave out the files that could not be
-	// stored; stats.totalBytes already does.
 	extStats := snapshot.ExtendedBackupStats{
 		BackupStats: snapshot.BackupStats{
-			FilesScanned:  stats.totalFiles - stats.totalFilesFailed,
+			FilesScanned:  stats.totalFiles,
 			TotalSize:     stats.totalBytes + stats.totalBytesSkipped,
 			ChunksCreated: stats.totalChunks,
 			BlobsCreated:  stats.totalBlobs,
@@ -405,7 +371,6 @@ func (v *Vaultik) finalizeSnapshotMetadata(
 		BlobUncompressedSize: stats.blobUncompressedSize,
 		CompressionLevel:     v.Config.CompressionLevel,
 		UploadDurationMs:     stats.uploadDuration.Milliseconds(),
-		NewChunkSize:         stats.newChunkSize,
 	}
 
 	err = v.SnapshotManager.UpdateSnapshotStatsExtended(v.ctx, snapshotID, extStats)
@@ -444,8 +409,7 @@ func (v *Vaultik) printSnapshotSummary(
 	snapshotID string, startTime time.Time, stats *snapshotStats,
 ) {
 	snapshotDuration := time.Since(startTime)
-	totalFilesChanged := stats.totalFiles - stats.totalFilesSkipped -
+	totalFilesChanged := stats.totalFiles - stats.totalFilesSkipped
-		stats.totalFilesFailed
 	totalBytesAll := stats.totalBytes + stats.totalBytesSkipped
 
 	var compressionRatio float64
@@ -462,10 +426,6 @@ func (v *Vaultik) printSnapshotSummary(
 		v.UI.Count(stats.totalFiles),
 		v.UI.Count(totalFilesChanged),
 		v.UI.Count(stats.totalFilesSkipped))
-	if stats.totalFilesFailed > 0 {
-		filesMsg += fmt.Sprintf(", %s failed", v.UI.Count(stats.totalFilesFailed))
-	}
-
 	if stats.totalFilesDeleted > 0 {
 		filesMsg += fmt.Sprintf(", %s deleted", v.UI.Count(stats.totalFilesDeleted))
 	}
@@ -636,7 +596,7 @@ func (v *Vaultik) confirmAndExecutePurge(
 			v.stdoutf("  %s (%s, %s)\n",
 				snap.ID,
 				snap.Timestamp.Format("2006-01-02 15:04:05"),
-				ubytes(snap.CompressedSize))
+				formatBytes(snap.CompressedSize))
 		}
 	}
 
@@ -673,7 +633,7 @@ func (v *Vaultik) confirmAndExecutePurge(
 				"snapshot_id", snapshotID, "error", err)
 		}
 
-		_, err = v.deleteRemoteSnapshotByKey(snapshot.RemoteSnapshotKey(snapshotID))
+		err = v.deleteRemoteSnapshotByKey(snapshot.RemoteSnapshotKey(snapshotID))
 		if err != nil {
 			return fmt.Errorf("deleting snapshot %s from remote: %w", snapshotID, err)
 		}
@@ -1183,11 +1143,6 @@ func (v *Vaultik) RemoveSnapshot(
 		return result, err
 	}
 
-	inLocalIndex, err := v.findSnapshotToRemove(snapshotID, opts)
-	if err != nil {
-		return result, err
-	}
-
 	if opts.DryRun {
 		return v.removeSnapshotDryRun(result, snapshotID, opts)
 	}
@@ -1196,13 +1151,11 @@ func (v *Vaultik) RemoveSnapshot(
 		return result, nil
 	}
 
-	if inLocalIndex {
+	log.Info("Removing snapshot from local database", "snapshot_id", snapshotID)
-		log.Info("Removing snapshot from local database", "snapshot_id", snapshotID)
 
-		err = v.deleteSnapshotFromLocalDB(snapshotID)
+	err = v.deleteSnapshotFromLocalDB(snapshotID)
-		if err != nil {
+	if err != nil {
-			return result, fmt.Errorf("removing from local database: %w", err)
+		return result, fmt.Errorf("removing from local database: %w", err)
-		}
 	}
 
 	if !opts.LocalOnly {
@@ -1221,11 +1174,9 @@ func (v *Vaultik) RemoveSnapshot(
 		return result, v.outputRemoveJSON(result)
 	}
 
-	if inLocalIndex {
+	v.stdoutf("Removed snapshot '%s' from local database\n", snapshotID)
-		v.stdoutf("Removed snapshot '%s' from local database\n", snapshotID)
-	}
 
-	if result.RemoteRemoved {
+	if !opts.LocalOnly && result.RemoteRemoved {
 		v.printlnStdout("Removed snapshot metadata from remote storage")
 		v.stdoutf("\nNote: The removed snapshot's blobs remain on the remote. "+
 			"Run '%s' to delete any blobs no longer referenced by any "+
@@ -1235,45 +1186,6 @@ func (v *Vaultik) RemoveSnapshot(
 	return result, nil
 }
 
-// findSnapshotToRemove reports whether the local index has a row for
-// snapshotID, and returns errSnapshotNotFound when there is nothing to
-// remove: no row and, unless LocalOnly is set, no metadata on the
-// destination store either. The destination store is consulted only
-// when the local index has no row, so a snapshot in the local index can
-// still be removed from it while the destination store is unreachable.
-func (v *Vaultik) findSnapshotToRemove(
-	snapshotID string, opts *RemoveOptions,
-) (bool, error) {
-	if v.Repositories != nil {
-		snap, err := v.Repositories.Snapshots.GetByID(v.ctx, snapshotID)
-		if err != nil {
-			return false, fmt.Errorf("looking up snapshot in local index: %w", err)
-		}
-
-		if snap != nil {
-			return true, nil
-		}
-	}
-
-	if opts.LocalOnly {
-		return false, fmt.Errorf("%w in the local index: %s",
-			errSnapshotNotFound, snapshotID)
-	}
-
-	objects, err := v.remoteSnapshotObjects(snapshot.RemoteSnapshotKey(snapshotID))
-	if err != nil {
-		return false, fmt.Errorf("looking up snapshot on destination store: %w", err)
-	}
-
-	if len(objects) == 0 {
-		return false, fmt.Errorf(
-			"%w in the local index or on the destination store: %s",
-			errSnapshotNotFound, snapshotID)
-	}
-
-	return false, nil
-}
-
 // removeSnapshotDryRun reports what RemoveSnapshot would do without
 // making changes.
 func (v *Vaultik) removeSnapshotDryRun(
@@ -1333,14 +1245,14 @@ func (v *Vaultik) confirmRemoveSnapshot(snapshotID string, opts *RemoveOptions)
 // didn't finish and to run `vaultik snapshot remove` for the snapshot
 // again once the destination store is reachable (`vaultik prune` never
 // removes snapshot metadata). Returns true when the remote removal
-// succeeded and deleted something.
+// succeeded.
 func (v *Vaultik) removeSnapshotRemote(snapshotID string, opts *RemoveOptions) bool {
 	log.Info("Removing snapshot metadata from remote storage",
 		"snapshot_id", snapshotID)
 
 	remoteKey := snapshot.RemoteSnapshotKey(snapshotID)
 
-	deleted, err := v.deleteRemoteSnapshotByKey(remoteKey)
+	err := v.deleteRemoteSnapshotByKey(remoteKey)
 	if err != nil {
 		log.Warn("Could not remove snapshot metadata from remote storage; "+
 			"run '"+snapshotRemoveCommandHint+"' with the snapshot's ID "+
@@ -1358,7 +1270,7 @@ func (v *Vaultik) removeSnapshotRemote(snapshotID string, opts *RemoveOptions) b
 		return false
 	}
 
-	return deleted > 0
+	return true
 }
 
 // RemoveAllSnapshots removes every snapshot known to the local
@@ -1650,7 +1562,7 @@ func (v *Vaultik) removeAllLocalSnapshots(
 		}
 
 		if !opts.LocalOnly {
-			_, err = v.deleteRemoteSnapshotByKey(
+			err = v.deleteRemoteSnapshotByKey(
 				snapshot.RemoteSnapshotKey(snapshotID))
 			if err != nil {
 				log.Warn("Failed to remove snapshot metadata from remote",
@@ -1676,7 +1588,7 @@ func (v *Vaultik) removeAllOrphanRemotes(
 	for _, key := range orphanRemoteKeys {
 		log.Info("Removing orphan remote snapshot", "remote_key", key)
 
-		_, err := v.deleteRemoteSnapshotByKey(key)
+		err := v.deleteRemoteSnapshotByKey(key)
 		if err != nil {
 			log.Warn("Failed to remove orphan from remote",
 				"remote_key", key, "error", err)
@@ -1723,44 +1635,34 @@ func (v *Vaultik) deleteSnapshotFromLocalDB(snapshotID string) error {
 }
 
 // deleteRemoteSnapshotByKey removes everything under
-// metadata/<remoteKey>/ on the destination store and returns how many
+// metadata/<remoteKey>/ on the destination store. The argument is a
-// objects it deleted. The argument is a remote key (double-SHA256
+// remote key (double-SHA256 derivation), not a human snapshot ID;
-// derivation), not a human snapshot ID; callers that have a human ID
+// callers that have a human ID must hash via snapshot.RemoteSnapshotKey
-// must hash via snapshot.RemoteSnapshotKey first.
+// first.
-func (v *Vaultik) deleteRemoteSnapshotByKey(remoteKey string) (int, error) {
+func (v *Vaultik) deleteRemoteSnapshotByKey(remoteKey string) error {
-	objectsToDelete, err := v.remoteSnapshotObjects(remoteKey)
+	prefix := fmt.Sprintf("metadata/%s/", remoteKey)
-	if err != nil {
+	objectCh := v.Storage.ListStream(v.ctx, prefix)
-		return 0, err
+
+	var objectsToDelete []string
+
+	for object := range objectCh {
+		if object.Err != nil {
+			return fmt.Errorf("listing objects: %w", object.Err)
+		}
+
+		objectsToDelete = append(objectsToDelete, object.Key)
 	}
 
-	for i, key := range objectsToDelete {
+	for _, key := range objectsToDelete {
-		err = v.Storage.Delete(v.ctx, key)
+		err := v.Storage.Delete(v.ctx, key)
 		if err != nil {
-			return i, fmt.Errorf("removing %s: %w", key, err)
+			return fmt.Errorf("removing %s: %w", key, err)
 		}
 
 		log.Debug("Deleted remote object", "key", key)
 	}
 
-	return len(objectsToDelete), nil
+	return nil
-}
-
-// remoteSnapshotObjects lists the keys of every object under
-// metadata/<remoteKey>/ on the destination store.
-func (v *Vaultik) remoteSnapshotObjects(remoteKey string) ([]string, error) {
-	prefix := fmt.Sprintf("metadata/%s/", remoteKey)
-
-	var keys []string
-
-	for object := range v.Storage.ListStream(v.ctx, prefix) {
-		if object.Err != nil {
-			return nil, fmt.Errorf("listing objects: %w", object.Err)
-		}
-
-		keys = append(keys, object.Key)
-	}
-
-	return keys, nil
 }
 
 // outputRemoveJSON outputs the removal result as JSON
@@ -1854,9 +1756,9 @@ func (v *Vaultik) PruneDatabase() (*PruneResult, error) {
 	return result, nil
 }
 
-// unknownText is what a count or size reads as when it could not be
+// countUnknown is what a count reads as when its query could not be run,
-// determined, distinct from "0", which is a real zero.
+// distinct from "0", which means the table really was empty.
-const unknownText = "unknown"
+const countUnknown = "unknown"
 
 // tableCountForReport returns the row count of a table for the prune
 // summary, or nil if the count could not be read. A read failure is
@@ -1893,7 +1795,7 @@ func countDiff(before, after *int64) *int64 {
 // one that could not be queried.
 func countText(count *int64) string {
 	if count == nil {
-		return unknownText
+		return countUnknown
 	}
 
 	return strconv.FormatInt(*count, 10)

internal/vaultik/snapshot_failed_file_test.go

@@ -1,123 +0,0 @@
-package vaultik_test
-
-import (
-	"bytes"
-	"context"
-	"fmt"
-	"os"
-	"path/filepath"
-	"testing"
-
-	"github.com/spf13/afero"
-	"github.com/stretchr/testify/assert"
-	"github.com/stretchr/testify/require"
-	"sneak.berlin/go/vaultik/internal/config"
-	"sneak.berlin/go/vaultik/internal/database"
-	"sneak.berlin/go/vaultik/internal/log"
-	"sneak.berlin/go/vaultik/internal/storage"
-	"sneak.berlin/go/vaultik/internal/ui"
-	"sneak.berlin/go/vaultik/internal/vaultik"
-)
-
-// openFailFs is the real filesystem, except that opening path fails
-// with err. Phase 1 of a backup only lstats a file, so it still counts
-// path; phase 2 is the first to open it.
-type openFailFs struct {
-	afero.OsFs
-
-	path string
-	err  error
-}
-
-//nolint:ireturn // afero.Fs.Open is defined to return the interface.
-func (f *openFailFs) Open(name string) (afero.File, error) {
-	if name == f.path {
-		return nil, &os.PathError{Op: "open", Path: name, Err: f.err}
-	}
-
-	return f.OsFs.Open(name)
-}
-
-// A file that phase 2 cannot open is reported as failed, not as
-// unchanged, and neither the summary's data total nor the snapshots row
-// counts it. See https://git.eeqj.de/sneak/vaultik/issues/280.
-func TestSnapshotSummaryCountsFileNotStoredAsFailed(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	tests := []struct {
-		name       string
-		openErr    error
-		skipErrors bool
-	}{
-		// What a normal user gets opening a file with mode 000.
-		{name: "unopenable under skip-errors",
-			openErr: os.ErrPermission, skipErrors: true},
-		// What opening a file removed after phase 1 gives.
-		{name: "removed between the phases",
-			openErr: os.ErrNotExist, skipErrors: false},
-	}
-
-	for _, tt := range tests {
-		t.Run(tt.name, func(t *testing.T) {
-			t.Parallel()
-
-			ctx := context.Background()
-
-			// The scan walks the source path with symlinks resolved, so
-			// failedPath must be spelled the same way to match.
-			tempDir, err := filepath.EvalSymlinks(t.TempDir())
-			require.NoError(t, err)
-
-			srcDir := filepath.Join(tempDir, "src")
-			failedPath := filepath.Join(srcDir, "failed.txt")
-			storedContent := []byte("this file is backed up")
-			storedSize := int64(len(storedContent))
-
-			fs := &openFailFs{path: failedPath, err: tt.openErr}
-			require.NoError(t, fs.MkdirAll(srcDir, 0o755))
-			require.NoError(t, afero.WriteFile(fs,
-				filepath.Join(srcDir, "stored.txt"), storedContent, 0o644))
-			require.NoError(t, afero.WriteFile(fs,
-				failedPath, []byte("this file cannot be opened"), 0o644))
-
-			cfg := faultTestConfig()
-			cfg.IndexPath = filepath.Join(tempDir, "index.sqlite")
-			cfg.Snapshots = map[string]config.SnapshotConfig{
-				"src": {Paths: []string{srcDir}},
-			}
-
-			store, err := storage.NewFileStorer(filepath.Join(tempDir, "remote"))
-			require.NoError(t, err)
-
-			db, err := database.New(ctx, cfg.IndexPath)
-			require.NoError(t, err)
-			t.Cleanup(func() { _ = db.Close() })
-
-			repos := database.NewRepositories(db)
-			out := &bytes.Buffer{}
-			v := newBackupVaultik(ctx, cfg, store, repos, db, fs)
-			v.UI = ui.NewWithColor(out, false)
-
-			require.NoError(t, v.CreateSnapshot(&vaultik.SnapshotCreateOptions{
-				SkipErrors: tt.skipErrors,
-				Snapshots:  []string{"src"},
-			}))
-
-			summary := out.String()
-			assert.Contains(t, summary,
-				"Files: 2 examined, 1 backed up, 0 unchanged, 1 failed.")
-			assert.Contains(t, summary,
-				fmt.Sprintf("Data: %s total (%s backed up).",
-					v.UI.Size(storedSize), v.UI.Size(storedSize)))
-
-			snap, err := repos.Snapshots.GetByID(ctx,
-				localSnapshotID(ctx, t, repos, "src"))
-			require.NoError(t, err)
-			require.NotNil(t, snap)
-
-			assert.Equal(t, int64(1), snap.FileCount)
-			assert.Equal(t, storedSize, snap.TotalSize)
-		})
-	}
-}

internal/vaultik/snapshot_list.go

@@ -553,8 +553,8 @@ func (v *Vaultik) printSnapshotTable(snapshots []SnapshotInfo) error {
 
 		if snap.LocallyTracked {
 			id = snap.ID.String()
-			uncompressed = ubytes(snap.UncompressedSize)
+			uncompressed = formatBytes(snap.UncompressedSize)
-			newChunks = ubytes(snap.NewChunkSize)
+			newChunks = formatBytes(snap.NewChunkSize)
 		} else {
 			id = formatRemoteOnlyID(snap.RemoteKey)
 			uncompressed = remoteOnlyCell
@@ -564,7 +564,7 @@ func (v *Vaultik) printSnapshotTable(snapshots []SnapshotInfo) error {
 		_, err = fmt.Fprintf(w, "%s\t%s\t%s\t%s\t%s\n",
 			id,
 			snap.Timestamp.Format("2006-01-02 15:04:05"),
-			ubytes(snap.CompressedSize),
+			formatBytes(snap.CompressedSize),
 			uncompressed,
 			newChunks)
 		if err != nil {

internal/vaultik/snapshot_list_test.go

@@ -212,8 +212,8 @@ const (
 	listConfiguredName = "home"
 	listLocalID        = "testhost_home_2026-03-01T10:00:00Z"
 	listRemoteID       = "otherhost_media_2026-03-02T11:22:33Z"
-	// fiveMegabytes is printed as "5.0 MB" by every command.
+	// fiveMegabytes formats as "5.0 MB" through formatBytes.
-	fiveMegabytes = 5_000_000
+	fiveMegabytes = 5 * 1024 * 1024
 )
 
 // TestListSnapshots_RemoteWithoutSecretKey is the regression guard for
@@ -306,48 +306,6 @@ func TestListSnapshots_RemoteOnlyRowRendering(t *testing.T) {
 		"are not in the local index")
 }
 
-// TestSnapshotListAndPurgePrintSizesLikeRemoteInfo checks that the
-// `snapshot list` table and the purge listing print a byte count the way
-// `remote info` does: in powers of 1000, as the MB label says.
-func TestSnapshotListAndPurgePrintSizesLikeRemoteInfo(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	const wantSize = "5.0 MB" // fiveMegabytes
-
-	env := newListEnv(t)
-
-	// A remote-only snapshot: `snapshot list` and `remote info` both take
-	// its size from the manifest.
-	remoteKey := env.addRemote(t, listRemoteID,
-		time.Date(2026, 3, 2, 11, 22, 33, 0, time.UTC))
-
-	// A locally tracked snapshot of the same size for the purge to list.
-	// The purge prints the snapshot's blob size, the last argument here.
-	start := time.Date(2026, 3, 1, 10, 0, 0, 0, time.UTC)
-	env.addLocal(t, listLocalID, start)
-	env.addRemote(t, listLocalID, start)
-	require.NoError(t, env.v.Repositories.Snapshots.UpdateCounts(
-		context.Background(), nil, listLocalID, 0, 0, 0, 0, fiveMegabytes))
-
-	require.NoError(t, env.v.RemoteInfo(false))
-	assert.Contains(t, findTableRow(t, env.stdout.String(), remoteKey[:16]),
-		wantSize, "remote info")
-
-	env.stdout.Reset()
-	require.NoError(t, env.v.ListSnapshots(false))
-	assert.Contains(t, findTableRow(t, env.stdout.String(),
-		"<remote only:"+remoteKey[:12]+">"), wantSize, "snapshot list")
-
-	// Without --force and with nothing on stdin the purge lists what it
-	// would delete, reads no confirmation, and deletes nothing.
-	env.stdout.Reset()
-	require.NoError(t, env.v.PurgeSnapshotsWithOptions(
-		&vaultik.SnapshotPurgeOptions{OlderThan: "1d"}))
-	assert.Contains(t, findTableRow(t, env.stdout.String(), listLocalID),
-		wantSize, "snapshot purge")
-}
-
 // findTableRow returns the single output line containing needle.
 func findTableRow(t *testing.T, out, needle string) string {
 	t.Helper()
@@ -487,7 +445,6 @@ type listJSONRow struct {
 	RemoteKey      string `json:"remote_key"`
 	Timestamp      string `json:"timestamp"`
 	CompressedSize int64  `json:"compressed_size"`
-	NewChunkSize   int64  `json:"new_chunk_size"`
 	LocallyTracked bool   `json:"locally_tracked"`
 	RemotePresent  *bool  `json:"remote_present"`
 }

internal/vaultik/snapshot_skip_errors_test.go

@@ -1,75 +0,0 @@
-package vaultik_test
-
-import (
-	"context"
-	"fmt"
-	"path/filepath"
-	"testing"
-
-	"github.com/spf13/afero"
-	"github.com/stretchr/testify/assert"
-	"github.com/stretchr/testify/require"
-	"sneak.berlin/go/vaultik/internal/config"
-	"sneak.berlin/go/vaultik/internal/database"
-	"sneak.berlin/go/vaultik/internal/log"
-	"sneak.berlin/go/vaultik/internal/storage"
-	"sneak.berlin/go/vaultik/internal/vaultik"
-)
-
-// --skip-errors skips only a file that cannot be opened or read. A local
-// index error while a directory is recorded stops the backup, and the
-// snapshot is not recorded as complete. See
-// https://git.eeqj.de/sneak/vaultik/issues/284.
-func TestSkipErrorsBackupStopsOnIndexErrorRecordingDirectory(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	ctx := context.Background()
-
-	// The scan walks the source path with symlinks resolved, so dirPath
-	// must be spelled the same way to match the row the scan inserts.
-	tempDir, err := filepath.EvalSymlinks(t.TempDir())
-	require.NoError(t, err)
-
-	srcDir := filepath.Join(tempDir, "src")
-	dirPath := filepath.Join(srcDir, "dir")
-
-	fs := afero.NewOsFs()
-	require.NoError(t, fs.MkdirAll(dirPath, 0o755))
-	require.NoError(t, afero.WriteFile(fs,
-		filepath.Join(dirPath, "file.txt"), []byte("file content"), 0o644))
-
-	cfg := faultTestConfig()
-	cfg.IndexPath = filepath.Join(tempDir, "index.sqlite")
-	cfg.Snapshots = map[string]config.SnapshotConfig{
-		"tree": {Paths: []string{srcDir}},
-	}
-
-	store, err := storage.NewFileStorer(filepath.Join(tempDir, "remote"))
-	require.NoError(t, err)
-
-	db, err := database.New(ctx, cfg.IndexPath)
-	require.NoError(t, err)
-	t.Cleanup(func() { _ = db.Close() })
-
-	// The local index refuses the directory's files row.
-	_, err = db.Conn().ExecContext(ctx, fmt.Sprintf(`
-		CREATE TRIGGER refuse_directory BEFORE INSERT ON files
-		WHEN NEW.path = '%s'
-		BEGIN SELECT RAISE(ABORT, 'simulated index error'); END`, dirPath))
-	require.NoError(t, err)
-
-	repos := database.NewRepositories(db)
-	v := newBackupVaultik(ctx, cfg, store, repos, db, fs)
-
-	err = v.CreateSnapshot(&vaultik.SnapshotCreateOptions{
-		SkipErrors: true,
-		Snapshots:  []string{"tree"},
-	})
-	require.ErrorContains(t, err, "simulated index error")
-
-	snapshots, err := repos.Snapshots.ListRecent(ctx, listRecentTestLimit)
-	require.NoError(t, err)
-	require.Len(t, snapshots, 1)
-	assert.Nil(t, snapshots[0].CompletedAt)
-}

internal/vaultik/storage_bind.go

@@ -9,7 +9,7 @@ import (
 )
 
 // errStorageBindingMismatch is returned when the local index database is
-// bound to a different destination than the configured one.
+// bound to a different destination than the configured storage_url.
 var errStorageBindingMismatch = errors.New(
 	"local index is bound to a different backup destination")
 
@@ -24,9 +24,8 @@ var errStorageBindingMismatch = errors.New(
 //
 // Behaviour:
 //   - On first use (empty stored value), record the configured
-//     destination (storage_url, or the s3.* endpoint, bucket and
+//     storage_url and log the binding.
-//     prefix) and log the binding.
+//   - When the stored value matches the configured storage_url, do
-//   - When the stored value matches the configured destination, do
 //     nothing and return nil.
 //   - When the two differ, refuse with an error that tells the user
 //     how to recover (revert the config, or run `vaultik database
@@ -47,10 +46,12 @@ func (v *Vaultik) EnsureStorageBinding() error {
 
 	configured := v.Config.StorageURL
 	if configured == "" {
-		// The s3.* form: bind on its endpoint, bucket and prefix,
+		// Some legacy configs still use the split s3.* keys instead of
-		// written the way storage_url would name the same destination.
+		// storage_url. Falling back to a synthetic URL for those would
-		s3 := v.Config.S3
+		// hide the fact that the binding is loose. Instead, treat
-		configured = "s3://" + s3.Bucket + "/" + s3.Prefix + "?endpoint=" + s3.Endpoint
+		// unset as "nothing to bind against" — the check is
+		// necessarily best-effort for those configs.
+		return nil
 	}
 
 	stored, err := v.Repositories.LocalMeta.Get(v.ctx, database.LocalMetaKeyStorageURL)
@@ -95,8 +96,7 @@ func buildBindingMismatchMessage(stored, configured string) string {
 		"future snapshots referencing blobs that don't exist at the new destination.\n" +
 		"\n" +
 		"To proceed, either:\n" +
-		"  - revert storage_url (or the s3.* endpoint, bucket and prefix) in your\n" +
+		"  - revert storage_url in your config to the bound destination, or\n" +
-		"    config to the bound destination, or\n" +
 		"  - run 'vaultik database delete' to discard the local index and rebuild it\n" +
 		"    from a fresh full backup against the new destination"
 }

internal/vaultik/storage_bind_test.go

@@ -76,51 +76,3 @@ func TestEnsureStorageBinding_MismatchRefuses(t *testing.T) {
 	assert.Contains(t, err.Error(), "file:///mnt/backups/new")
 	assert.Contains(t, err.Error(), "vaultik database delete")
 }
-
-// A config with no storage_url names its destination with s3.endpoint,
-// s3.bucket and s3.prefix; a change to any of them must be refused just
-// as a changed storage_url is.
-func TestEnsureStorageBinding_S3FieldsChangeRefuses(t *testing.T) {
-	log.Initialize(log.Config{})
-	t.Parallel()
-
-	bound := config.S3Config{
-		Endpoint: "https://s3.example.com",
-		Bucket:   "bucket-a",
-		Prefix:   "backups",
-	}
-
-	tests := []struct {
-		name    string
-		changed config.S3Config
-	}{
-		{"bucket", config.S3Config{
-			Endpoint: bound.Endpoint, Bucket: "bucket-b", Prefix: bound.Prefix,
-		}},
-		{"prefix", config.S3Config{
-			Endpoint: bound.Endpoint, Bucket: bound.Bucket, Prefix: "other",
-		}},
-		{"endpoint", config.S3Config{
-			Endpoint: "https://s3.other.com", Bucket: bound.Bucket, Prefix: bound.Prefix,
-		}},
-	}
-
-	for _, tt := range tests {
-		t.Run(tt.name, func(t *testing.T) {
-			t.Parallel()
-
-			tv, _ := buildBindTestVaultik(t, "")
-
-			tv.Config.S3 = bound
-			require.NoError(t, tv.EnsureStorageBinding(), "first use binds")
-			require.NoError(t, tv.EnsureStorageBinding(), "same destination passes")
-
-			tv.Config.S3 = tt.changed
-			err := tv.EnsureStorageBinding()
-			require.Error(t, err)
-			assert.Contains(t, err.Error(),
-				"local index is bound to a different backup destination")
-			assert.Contains(t, err.Error(), "vaultik database delete")
-		})
-	}
-}