Report blob counts from snapshot verify --deep --json (closes #314)

Deep verify set verified only on success and never set missing, so a
failed --deep --json run reported zero for both. It now counts each blob
whose contents pass as it goes, and the existence check runs through
every blob, counting the ones storage reports not found as missing and
the wrong-size ones as mismatched, as shallow verify does; it fails if it
found any. Any other storage error stops the check and fails with that
error, so a blob that cannot be checked is never reported as missing.

Deep verify still stops at the first damaged blob and reads no blob
contents while any blob is missing or the wrong size, so verified is 0
there where shallow mode counts the present blobs.

Model: opus-5-5

README.md

@@ -386,10 +386,12 @@ manifest on the destination store to compute the still-referenced blob
 set and delete any blob not in that set. Step (3) reads all remote
 manifests — network cost scales with the number of snapshots. `snapshot
 create --prune` runs the same cleanup automatically; this is the
-manual entry point for the same work.
+manual entry point for the same work. If a blob cannot be deleted, the
+command (and `snapshot create --prune`) exits non-zero.
 * `--force`: Skip confirmation prompt
 * `--json`: Output stats as JSON. Also skips the confirmation prompt, as
-  `--force` does.
+  `--force` does. A blob that cannot be deleted is counted in
+  `blobs_failed`, and the document is printed before the non-zero exit.
 
 **`info`**: Display system configuration, storage settings, encryption
 recipients, and local database statistics.
@@ -411,7 +413,8 @@ since `prune` never deletes it.
 **`remote nuke`**: Delete every snapshot's metadata and every blob from the
 backup destination store, leaving the bucket prefix empty. Destructive and
 irreversible. This is the single supported way to wipe the entire
-destination store.
+destination store. If anything cannot be deleted, the command exits
+non-zero; running it again deletes what is left.
 * `--force`: Required to confirm destruction.
 
 **`database delete`**: Delete the local SQLite state database file

internal/database/blob_chunks.go

@@ -58,12 +58,7 @@ func (r *BlobChunkRepository) GetByBlobID(
 		return nil, fmt.Errorf("querying blob chunks: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	var blobChunks []*BlobChunk
 

internal/database/blobs.go

@@ -83,12 +83,7 @@ func (r *BlobRepository) GetAll(ctx context.Context) (map[string]*Blob, error) {
 		return nil, fmt.Errorf("querying blobs: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	out := make(map[string]*Blob)
 

internal/database/chunk_files.go

@@ -61,12 +61,7 @@ func (r *ChunkFileRepository) GetByChunkHash(
 		return nil, fmt.Errorf("querying chunk files: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	return r.scanChunkFiles(rows)
 }
@@ -87,12 +82,7 @@ func (r *ChunkFileRepository) GetByFilePath(
 		return nil, fmt.Errorf("querying chunk files: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	return r.scanChunkFiles(rows)
 }
@@ -112,12 +102,7 @@ func (r *ChunkFileRepository) GetByFileID(
 		return nil, fmt.Errorf("querying chunk files: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	return r.scanChunkFiles(rows)
 }

internal/database/chunks.go

@@ -107,12 +107,7 @@ func (r *ChunkRepository) GetByHashes(
 		return nil, fmt.Errorf("querying chunks: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	var chunks []*Chunk
 
@@ -152,12 +147,7 @@ func (r *ChunkRepository) ListUnpacked(
 		return nil, fmt.Errorf("querying unpacked chunks: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	var chunks []*Chunk
 

internal/database/chunks_ext.go

@@ -38,12 +38,7 @@ func (r *ChunkRepository) list(ctx context.Context, query string) ([]*Chunk, err
 		return nil, fmt.Errorf("querying chunks: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	var chunks []*Chunk
 

internal/database/errors.go

@@ -1,12 +0,0 @@
-package database
-
-import (
-	"fmt"
-	"os"
-)
-
-// Fatalf prints an error message to stderr and exits with status 1
-func Fatalf(format string, args ...any) {
-	fmt.Fprintf(os.Stderr, "FATAL: "+format+"\n", args...)
-	os.Exit(1)
-}

internal/database/file_chunks.go

@@ -62,12 +62,7 @@ func (r *FileChunkRepository) GetByPath(
 		return nil, fmt.Errorf("querying file chunks: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	return r.scanFileChunks(rows)
 }
@@ -88,12 +83,7 @@ func (r *FileChunkRepository) GetByFileID(
 		return nil, fmt.Errorf("querying file chunks: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	return r.scanFileChunks(rows)
 }
@@ -117,12 +107,7 @@ func (r *FileChunkRepository) GetByPathTx(
 		return nil, fmt.Errorf("querying file chunks: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	fileChunks, err := r.scanFileChunks(rows)
 	LogSQL("GetByPathTx", "Complete", path, "count", len(fileChunks))

internal/database/files.go

@@ -175,12 +175,7 @@ func (r *FileRepository) ListModifiedSince(
 		return nil, fmt.Errorf("querying files: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	var files []*File
 
@@ -256,12 +251,7 @@ func (r *FileRepository) ListUnderPath(
 		return nil, fmt.Errorf("querying files: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	var files []*File
 
@@ -304,12 +294,7 @@ func (r *FileRepository) ListIDsWithChunksNotInUploadedBlobs(
 		return nil, fmt.Errorf("querying files: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	var ids []types.FileID
 
@@ -340,12 +325,7 @@ func (r *FileRepository) ListAll(ctx context.Context) ([]*File, error) {
 		return nil, fmt.Errorf("querying files: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	var files []*File
 

internal/database/repositories.go

@@ -106,22 +106,24 @@ func (r *Repositories) WithReadTx(ctx context.Context, fn TxFunc) error {
 
 	defer func() {
 		if p := recover(); p != nil {
-			rollbackErr := tx.Rollback()
+			// The panic is the failure to report, so a rollback error
-			if rollbackErr != nil {
+			// is dropped.
-				Fatalf("failed to rollback transaction: %v", rollbackErr)
+			_ = tx.Rollback()
-			}
 
 			panic(p)
-		} else if err != nil {
-			rollbackErr := tx.Rollback()
-			if rollbackErr != nil {
-				Fatalf("failed to rollback transaction: %v", rollbackErr)
-			}
 		}
 	}()
 
 	err = fn(ctx, tx)
 	if err != nil {
+		// Once ctx is cancelled, database/sql rolls the transaction
+		// back itself and Rollback returns sql.ErrTxDone.
+		rollbackErr := tx.Rollback()
+		if rollbackErr != nil && !errors.Is(rollbackErr, sql.ErrTxDone) {
+			return fmt.Errorf("%w; rolling back transaction: %w",
+				err, rollbackErr)
+		}
+
 		return err
 	}
 

internal/database/repositories_test.go

@@ -411,3 +411,41 @@ func TestRepositoriesReadTransaction(t *testing.T) {
 		t.Error("expected to retrieve file in read transaction")
 	}
 }
+
+// When the context is cancelled during a read transaction's body,
+// database/sql rolls the transaction back itself, so WithReadTx's own
+// rollback finds it already done. WithReadTx must return the body's error
+// alone, without that rollback.
+func TestRepositoriesReadTransactionContextCancelled(t *testing.T) {
+	t.Parallel()
+
+	db, cleanup := setupTestDB(t)
+	defer cleanup()
+
+	ctx, cancel := context.WithCancel(context.Background())
+	defer cancel()
+
+	repos := database.NewRepositories(db)
+
+	err := repos.WithReadTx(ctx, func(ctx context.Context, tx *sql.Tx) error {
+		cancel()
+
+		// database/sql rolls back from a goroutine of its own; wait
+		// until it has, so the test does not depend on that race.
+		for {
+			_, err := tx.ExecContext(context.WithoutCancel(ctx), "SELECT 1")
+			if errors.Is(err, sql.ErrTxDone) {
+				return ctx.Err()
+			}
+
+			time.Sleep(time.Millisecond)
+		}
+	})
+	if !errors.Is(err, context.Canceled) {
+		t.Fatalf("expected context.Canceled, got: %v", err)
+	}
+
+	if errors.Is(err, sql.ErrTxDone) {
+		t.Fatalf("the already-done rollback was reported: %v", err)
+	}
+}

internal/database/snapshots.go

@@ -241,12 +241,7 @@ func (r *SnapshotRepository) GetOnlySnapshot(ctx context.Context) (*Snapshot, er
 		return nil, fmt.Errorf("querying snapshots: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	snapshots, err := r.scanSnapshotRows(rows)
 	if err != nil {
@@ -281,12 +276,7 @@ func (r *SnapshotRepository) ListRecent(
 		return nil, fmt.Errorf("querying snapshots: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	return r.scanSnapshotRows(rows)
 }
@@ -501,12 +491,7 @@ func (r *SnapshotRepository) GetBlobHashes(
 		return nil, fmt.Errorf("querying blob hashes: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	var blobs []string
 
@@ -634,12 +619,7 @@ func (r *SnapshotRepository) GetIncompleteSnapshots(
 		return nil, fmt.Errorf("querying incomplete snapshots: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	return r.scanSnapshotRows(rows)
 }
@@ -662,12 +642,7 @@ func (r *SnapshotRepository) GetIncompleteByHostname(
 		return nil, fmt.Errorf("querying incomplete snapshots: %w", err)
 	}
 
-	defer func() {
+	defer func() { _ = rows.Close() }()
-		err := rows.Close()
-		if err != nil {
-			Fatalf("failed to close rows: %v", err)
-		}
-	}()
 
 	// Same column set as every other multi-row snapshot query, so the
 	// shared scanner applies — including its timestamp normalization.

internal/s3/client.go

@@ -18,6 +18,13 @@ import (
 	"github.com/aws/smithy-go/logging"
 )
 
+// ErrNoContinuationToken is returned by ListObjects and ListObjectsStream
+// when the server marks a page of a listing truncated but sends no
+// continuation token to fetch the rest with, as a server answering V2
+// listings V1-style does.
+var ErrNoContinuationToken = errors.New(
+	"server marked the listing truncated but sent no continuation token")
+
 // Client wraps the AWS S3 client for vaultik operations.
 // It provides a simplified interface for S3 operations with automatic
 // prefix handling and connection management. All operations are performed
@@ -214,7 +221,7 @@ func (c *Client) ListObjects(ctx context.Context, prefix string) ([]string, erro
 	})
 
 	for paginator.HasMorePages() {
-		page, err := paginator.NextPage(ctx)
+		page, err := nextListPage(ctx, paginator)
 		if err != nil {
 			return nil, err
 		}
@@ -235,6 +242,26 @@ func (c *Client) ListObjects(ctx context.Context, prefix string) ([]string, erro
 	return keys, nil
 }
 
+// nextListPage fetches the next page of a listing. The SDK paginator takes
+// a page marked truncated without a continuation token for the last page
+// and stops without an error, so such a page is ErrNoContinuationToken
+// here instead.
+func nextListPage(
+	ctx context.Context, paginator *s3.ListObjectsV2Paginator,
+) (*s3.ListObjectsV2Output, error) {
+	page, err := paginator.NextPage(ctx)
+	if err != nil {
+		return nil, err
+	}
+
+	truncated := aws.ToBool(page.IsTruncated)
+	if truncated && aws.ToString(page.NextContinuationToken) == "" {
+		return nil, ErrNoContinuationToken
+	}
+
+	return page, nil
+}
+
 // HeadObject checks if an object exists in S3.
 // Returns true if the object exists, false otherwise.
 // The key is automatically prefixed with the configured prefix.
@@ -300,7 +327,7 @@ func (c *Client) ListObjectsStream(
 		})
 
 		for paginator.HasMorePages() {
-			page, err := paginator.NextPage(ctx)
+			page, err := nextListPage(ctx, paginator)
 			if err != nil {
 				ch <- ObjectInfo{Err: err}
 

internal/snapshot/blob_temp_file_test.go

@@ -0,0 +1,62 @@
+//nolint:testpackage // exercises the unexported cleanupBlobTempFile
+package snapshot
+
+import (
+	"errors"
+	"os"
+	"testing"
+
+	"github.com/spf13/afero"
+	"sneak.berlin/go/vaultik/internal/blob"
+)
+
+// A blob temp file that cannot be closed or removed must make the cleanup
+// return an error, not end the process.
+func TestCleanupBlobTempFileReturnsErrors(t *testing.T) {
+	t.Parallel()
+
+	fs := afero.NewOsFs()
+	s := &Scanner{fs: fs}
+
+	tests := []struct {
+		name string
+		// prepare runs before the cleanup and makes its close or remove
+		// fail.
+		prepare func(tempFile afero.File) error
+		want    error
+	}{
+		{
+			name:    "close fails",
+			prepare: func(tempFile afero.File) error { return tempFile.Close() },
+			want:    os.ErrClosed,
+		},
+		{
+			name: "remove fails",
+			prepare: func(tempFile afero.File) error {
+				return fs.Remove(tempFile.Name())
+			},
+			want: os.ErrNotExist,
+		},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			tempFile, err := afero.TempFile(fs, t.TempDir(), "blob-*.tmp")
+			if err != nil {
+				t.Fatal(err)
+			}
+
+			err = tt.prepare(tempFile)
+			if err != nil {
+				t.Fatal(err)
+			}
+
+			err = s.cleanupBlobTempFile(&blob.WithReader{TempFile: tempFile})
+			if !errors.Is(err, tt.want) {
+				t.Fatalf("expected an error wrapping %v, got: %v", tt.want, err)
+			}
+		})
+	}
+}

internal/snapshot/scanner.go

@@ -1556,19 +1556,23 @@ func (s *Scanner) handleBlobReady(
 	blobExists, err := s.uploadBlobIfNeeded(
 		ctx, blobPath, blobWithReader, startTime, result)
 	if err != nil {
-		s.cleanupBlobTempFile(blobWithReader)
+		cleanupErr := s.cleanupBlobTempFile(blobWithReader)
 
-		return fmt.Errorf("uploading blob %s: %w", finishedBlob.Hash, err)
+		return errors.Join(
+			fmt.Errorf("uploading blob %s: %w", finishedBlob.Hash, err), cleanupErr)
 	}
 
 	err = s.recordBlobMetadata(ctx, finishedBlob, blobExists, startTime)
 	if err != nil {
-		s.cleanupBlobTempFile(blobWithReader)
+		cleanupErr := s.cleanupBlobTempFile(blobWithReader)
 
-		return err
+		return errors.Join(err, cleanupErr)
 	}
 
-	s.cleanupBlobTempFile(blobWithReader)
+	err = s.cleanupBlobTempFile(blobWithReader)
+	if err != nil {
+		return err
+	}
 
 	// Chunks from this blob are now committed to DB - remove from pending set
 	s.removePendingChunkHashes(blobWithReader.InsertedChunkHashes)
@@ -1762,20 +1766,22 @@ func (s *Scanner) recordBlobMetadata(
 }
 
 // cleanupBlobTempFile closes and removes the blob's temporary file
-func (s *Scanner) cleanupBlobTempFile(blobWithReader *blob.WithReader) {
+func (s *Scanner) cleanupBlobTempFile(blobWithReader *blob.WithReader) error {
 	if blobWithReader.TempFile != nil {
 		tempName := blobWithReader.TempFile.Name()
 
 		err := blobWithReader.TempFile.Close()
 		if err != nil {
-			log.Fatal("Failed to close temp file", "file", tempName, "error", err)
+			return fmt.Errorf("closing blob temp file: %w", err)
 		}
 
 		err = s.fs.Remove(tempName)
 		if err != nil {
-			log.Fatal("Failed to remove temp file", "file", tempName, "error", err)
+			return fmt.Errorf("removing blob temp file: %w", err)
 		}
 	}
+
+	return nil
 }
 
 // streamingChunkInfo tracks chunk metadata collected during streaming

internal/storage/faultstore/faultstore.go

@@ -1,15 +1,16 @@
 // Package faultstore provides a storage.Storer wrapper that injects
 // faults on demand, so tests can reproduce the failure modes a real
 // backend exhibits: an upload that fails partway, a backend that reports
-// success while storing nothing, and reads that return corrupt or
+// success while storing nothing, reads that return corrupt or truncated
-// truncated bytes. It is the seam called for by the fault-injection
+// bytes, and a delete the backend refuses. It is the seam called for by
-// tests (sneak/vaultik issue 72) and is meant to be reused by future
+// the fault-injection tests (sneak/vaultik issue 72) and is meant to be
-// tests rather than re-implemented per case.
+// reused by future tests rather than re-implemented per case.
 //
-// The wrapper delegates every method to the inner Storer. Two hooks
+// The wrapper delegates every method to the inner Storer. Three hooks
-// change that: OnPut decides the fate of each write, and OnGet decides
+// change that: OnPut decides the fate of each write, OnGet decides how
-// how each read's bytes are returned. Both are keyed by the object key,
+// each read's bytes are returned, and OnDelete decides whether each
-// so a test can fault only blobs, only metadata, or a single object.
+// delete fails. All are keyed by the object key, so a test can fault
+// only blobs, only metadata, or a single object.
 package faultstore
 
 import (
@@ -25,6 +26,10 @@ import (
 // ErrInjectedUpload is returned by a Put the OnPut hook chose to fail.
 var ErrInjectedUpload = errors.New("faultstore: injected upload failure")
 
+// ErrInjectedDelete is returned by a Delete the OnDelete hook chose to
+// fail.
+var ErrInjectedDelete = errors.New("faultstore: injected delete failure")
+
 // PutAction is the disposition OnPut assigns to a write.
 type PutAction int
 
@@ -66,6 +71,11 @@ type Storer struct {
 	// OnGet, when set, is consulted for every Get with the object key
 	// and damages the returned bytes accordingly.
 	OnGet func(key string) GetFault
+
+	// OnDelete, when set, is consulted before every Delete with the
+	// object key. Returning true fails the delete and leaves the object
+	// in place.
+	OnDelete func(key string) bool
 }
 
 // New wraps inner. inner must be non-nil.
@@ -154,8 +164,12 @@ func (f *Storer) Stat(ctx context.Context, key string) (*storage.ObjectInfo, err
 	return f.inner.Stat(ctx, key)
 }
 
-// Delete delegates unchanged.
+// Delete removes the object unless OnDelete fails the delete.
 func (f *Storer) Delete(ctx context.Context, key string) error {
+	if f.OnDelete != nil && f.OnDelete(key) {
+		return fmt.Errorf("%w for %q", ErrInjectedDelete, key)
+	}
+
 	return f.inner.Delete(ctx, key)
 }
 

internal/storage/s3_test.go

@@ -4,6 +4,7 @@ import (
 	"bytes"
 	"context"
 	"errors"
+	"io"
 	"net/http"
 	"net/http/httptest"
 	"slices"
@@ -22,13 +23,16 @@ import (
 // s3TestBucket is the bucket created for each in-process S3 server.
 const s3TestBucket = "test-bucket"
 
-// Credentials for the tests that build a storer from a config.Config. The
+// Credentials for the tests' S3 clients. The test servers accept any.
-// in-process S3 server accepts any.
 const (
 	s3TestAccessKeyID     = "key"
 	s3TestSecretAccessKey = "secret"
 )
 
+// s3TestRegion is the region of the S3 clients built here with
+// s3.NewClient. The test servers ignore it.
+const s3TestRegion = "us-east-1"
+
 // newS3Storer builds an s3:// backend backed by a fresh in-process
 // S3 server. It reuses the same in-memory S3 harness (gofakes3 + s3mem
 // over httptest) that internal/s3 and the not-found regression test use,
@@ -55,7 +59,7 @@ func newS3Storer(t *testing.T) storage.Storer {
 		Bucket:          s3TestBucket,
 		AccessKeyID:     "test",
 		SecretAccessKey: "test",
-		Region:          "us-east-1",
+		Region:          s3TestRegion,
 	})
 	if err != nil {
 		t.Fatalf("new client: %v", err)
@@ -93,6 +97,68 @@ func TestS3StorerMissingKeyMapsToErrNotFound(t *testing.T) {
 	}
 }
 
+// TestS3ListingCutShortIsAnError checks that List and ListStream fail on a
+// listing page marked truncated that carries no continuation token, as a
+// server answering V2 listings V1-style sends it. Taken as the last page,
+// it would hide every later key, and prune would treat the blobs of the
+// snapshots listed there as unreferenced.
+func TestS3ListingCutShortIsAnError(t *testing.T) {
+	t.Parallel()
+
+	const (
+		prefix        = "metadata/"
+		truncatedPage = `<?xml version="1.0" encoding="UTF-8"?>
+<ListBucketResult xmlns="http://s3.amazonaws.com/doc/2006-03-01/">
+  <Name>test-bucket</Name>
+  <Prefix>metadata/</Prefix>
+  <KeyCount>1</KeyCount>
+  <MaxKeys>1</MaxKeys>
+  <IsTruncated>true</IsTruncated>
+  <Contents>
+    <Key>metadata/snap/manifest.json.zst</Key>
+    <Size>8</Size>
+  </Contents>
+</ListBucketResult>`
+	)
+
+	srv := httptest.NewServer(http.HandlerFunc(
+		func(w http.ResponseWriter, _ *http.Request) {
+			_, _ = io.WriteString(w, truncatedPage)
+		}))
+	t.Cleanup(srv.Close)
+
+	client, err := s3.NewClient(context.Background(), s3.Config{
+		Endpoint:        srv.URL,
+		Bucket:          s3TestBucket,
+		AccessKeyID:     s3TestAccessKeyID,
+		SecretAccessKey: s3TestSecretAccessKey,
+		Region:          s3TestRegion,
+	})
+	if err != nil {
+		t.Fatalf("new client: %v", err)
+	}
+
+	storer := storage.NewS3Storer(client)
+	ctx := context.Background()
+
+	keys, err := storer.List(ctx, prefix)
+	if !errors.Is(err, s3.ErrNoContinuationToken) {
+		t.Errorf("List = %q, %v; want ErrNoContinuationToken", keys, err)
+	}
+
+	var streamErr error
+
+	for obj := range storer.ListStream(ctx, prefix) {
+		if obj.Err != nil {
+			streamErr = obj.Err
+		}
+	}
+
+	if !errors.Is(streamErr, s3.ErrNoContinuationToken) {
+		t.Errorf("ListStream error = %v, want ErrNoContinuationToken", streamErr)
+	}
+}
+
 // TestS3URLPrefixKeyLayout pins the bucket keys an s3:// URL reads and
 // writes: the README's remote storage layout, with the prefix joined to
 // each key by one "/". s3://b/p and s3://b/p/ must be the same

internal/vaultik/deep_verify_test.go

@@ -1,7 +1,9 @@
 package vaultik_test
 
 import (
+	"bytes"
 	"context"
+	"crypto/rand"
 	"io"
 	"os"
 	"path/filepath"
@@ -9,7 +11,9 @@ import (
 
 	"github.com/spf13/afero"
 	"github.com/stretchr/testify/require"
+	"sneak.berlin/go/vaultik/internal/config"
 	"sneak.berlin/go/vaultik/internal/log"
+	"sneak.berlin/go/vaultik/internal/storage"
 	"sneak.berlin/go/vaultik/internal/ui"
 	"sneak.berlin/go/vaultik/internal/vaultik"
 )
@@ -77,6 +81,174 @@ func TestDeepVerifyAcceptsHealthyAndRejectsCorruptBlob(t *testing.T) {
 		"deep verify should fail on a corrupted blob")
 }
 
+// TestDeepVerifyJSONCountsBlobs checks the verified and missing counts
+// that deep verify reports under --json: on a healthy snapshot, with a
+// damaged blob, and with missing blobs. Deep verify stops at the first
+// damaged blob, so the blobs read before it are the ones verified; when
+// blobs are missing it reads no blob contents, but counts every missing
+// blob.
+func TestDeepVerifyJSONCountsBlobs(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	fs := afero.NewOsFs()
+	ctx := context.Background()
+	storeDir := filepath.Join(t.TempDir(), "remote")
+
+	cfg, storer, snapshotID, keys := backUpSeveralBlobs(ctx, t, storeDir)
+
+	healthy, err := deepVerifyJSON(ctx, t, cfg, storer, snapshotID)
+	require.NoError(t, err)
+	require.Equal(t, "ok", healthy.Status)
+	require.Len(t, keys, healthy.BlobCount)
+	require.Equal(t, healthy.BlobCount, healthy.Verified)
+	require.Zero(t, healthy.Missing)
+
+	// Damage the last blob read, keeping its length, so every blob before
+	// it is read and passes first.
+	lastPath := filepath.Join(storeDir, keys[len(keys)-1])
+	blob, err := afero.ReadFile(fs, lastPath)
+	require.NoError(t, err)
+
+	blob[len(blob)/2] ^= 0xff
+	require.NoError(t, afero.WriteFile(fs, lastPath, blob, 0o600))
+
+	got, err := deepVerifyJSON(ctx, t, cfg, storer, snapshotID)
+	require.Error(t, err)
+	require.Equal(t, "failed", got.Status)
+	require.Equal(t, healthy.BlobCount-1, got.Verified)
+	require.Zero(t, got.Missing)
+
+	// Delete the first blob and the damaged last one: both must be
+	// counted as missing, not only the first one found.
+	var deletedSize int64
+
+	for _, key := range []string{keys[0], keys[len(keys)-1]} {
+		info, statErr := storer.Stat(ctx, key)
+		require.NoError(t, statErr)
+
+		deletedSize += info.Size
+
+		require.NoError(t, storer.Delete(ctx, key))
+	}
+
+	got, err = deepVerifyJSON(ctx, t, cfg, storer, snapshotID)
+	require.Error(t, err)
+	require.Equal(t, "failed", got.Status)
+	require.Equal(t, 2, got.Missing)
+	require.Equal(t, deletedSize, got.MissingSize)
+	require.Zero(t, got.Verified)
+}
+
+// TestDeepVerifyJSONCountsWrongSizeBlob checks that under --deep --json a
+// blob of the wrong size is counted in mismatched and fails the run, and
+// that the check goes on past it to count a missing blob after it.
+func TestDeepVerifyJSONCountsWrongSizeBlob(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	fs := afero.NewOsFs()
+	ctx := context.Background()
+	storeDir := filepath.Join(t.TempDir(), "remote")
+
+	cfg, storer, snapshotID, keys := backUpSeveralBlobs(ctx, t, storeDir)
+
+	// Make the first blob checked longer, and delete the last one.
+	firstPath := filepath.Join(storeDir, keys[0])
+	blob, err := afero.ReadFile(fs, firstPath)
+	require.NoError(t, err)
+
+	blob = append(blob, []byte("extra")...)
+	require.NoError(t, afero.WriteFile(fs, firstPath, blob, 0o600))
+	require.NoError(t, storer.Delete(ctx, keys[len(keys)-1]))
+
+	got, err := deepVerifyJSON(ctx, t, cfg, storer, snapshotID)
+	require.Error(t, err)
+	require.Equal(t, "failed", got.Status)
+	require.Equal(t, 1, got.Mismatched)
+	require.Equal(t, 1, got.Missing)
+	require.Zero(t, got.Verified)
+}
+
+// TestDeepVerifyStopsOnBlobThatCannotBeChecked checks that a blob that is
+// present in storage but cannot be checked is not counted as missing:
+// deep verify stops and fails with the storage error.
+func TestDeepVerifyStopsOnBlobThatCannotBeChecked(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	ctx := context.Background()
+	storeDir := filepath.Join(t.TempDir(), "remote")
+
+	cfg, storer, snapshotID, keys := backUpSeveralBlobs(ctx, t, storeDir)
+	failing := statFailingStorer{Storer: storer, failKeys: []string{keys[0]}}
+
+	got, err := deepVerifyJSON(ctx, t, cfg, failing, snapshotID)
+	require.Error(t, err)
+	require.Equal(t, "failed", got.Status)
+	require.Zero(t, got.Missing)
+	require.Contains(t, got.ErrorMessage, errStatDenied.Error())
+}
+
+// backUpSeveralBlobs backs up random data, which does not compress or
+// deduplicate, so it fills at least three blobs in a store on disk at
+// storeDir. It returns the blobs' storage keys sorted, which is hash
+// order, the order deep verify reads them in.
+func backUpSeveralBlobs(
+	ctx context.Context, t *testing.T, storeDir string,
+) (*config.Config, *storage.FileStorer, string, []string) {
+	t.Helper()
+
+	fs := afero.NewOsFs()
+	tempDir := t.TempDir()
+	dataDir := filepath.Join(tempDir, "source")
+	dbPath := filepath.Join(tempDir, "index.sqlite")
+
+	chunkSize := int64(32 * 1024)
+	maxBlobSize := int64(128 * 1024)
+
+	data := make([]byte, maxBlobSize*4)
+	_, err := rand.Read(data)
+	require.NoError(t, err)
+	require.NoError(t, fs.MkdirAll(dataDir, 0o755))
+	require.NoError(t, afero.WriteFile(fs,
+		filepath.Join(dataDir, "data.bin"), data, 0o644))
+
+	cfg, storer, snapshotID := runFileStorageBackup(
+		ctx, t, fs, dataDir, storeDir, dbPath, chunkSize, maxBlobSize)
+
+	keys := storedBlobKeys(t, storeDir)
+	require.GreaterOrEqual(t, len(keys), 3)
+
+	return cfg, storer, snapshotID, keys
+}
+
+// deepVerifyJSON runs deep verify with --json on snapshotID and returns
+// the decoded result and the error RunDeepVerify returned.
+func deepVerifyJSON(
+	ctx context.Context, t *testing.T,
+	cfg *config.Config, storer storage.Storer, snapshotID string,
+) (vaultik.VerifyResult, error) {
+	t.Helper()
+
+	var out bytes.Buffer
+
+	v := &vaultik.Vaultik{
+		Config:  cfg,
+		Storage: storer,
+		Fs:      afero.NewOsFs(),
+		Stdout:  &out,
+		Stderr:  io.Discard,
+		UI:      ui.NewWithColor(io.Discard, false),
+	}
+	v.SetContext(ctx)
+
+	err := v.RunDeepVerify(snapshotID,
+		&vaultik.VerifyOptions{Deep: true, JSON: true})
+
+	return decodeVerifyResult(t, out.Bytes()), err
+}
+
 // corruptOneBlob flips a middle byte of the first blob file found under
 // blobsDir, leaving the file length unchanged.
 func corruptOneBlob(t *testing.T, fs afero.Fs, blobsDir string) {

internal/vaultik/nuke_remote_test.go

@@ -5,12 +5,14 @@ import (
 	"io/fs"
 	"os"
 	"path/filepath"
+	"strings"
 	"testing"
 
 	"github.com/stretchr/testify/assert"
 	"github.com/stretchr/testify/require"
 	"sneak.berlin/go/vaultik/internal/log"
 	"sneak.berlin/go/vaultik/internal/snapshot"
+	"sneak.berlin/go/vaultik/internal/storage/faultstore"
 )
 
 // TestNukeRemoteLeavesNoFiles checks that remote nuke leaves no file
@@ -23,7 +25,7 @@ func TestNukeRemoteLeavesNoFiles(t *testing.T) {
 
 	ctx := context.Background()
 	storeDir := filepath.Join(t.TempDir(), "store")
-	v, repos, _ := backUpToFileDestination(ctx, t, storeDir)
+	v, repos, out := backUpToFileDestination(ctx, t, storeDir)
 
 	snapshots, err := repos.Snapshots.ListRecent(ctx, listRecentTestLimit)
 	require.NoError(t, err)
@@ -61,4 +63,82 @@ func TestNukeRemoteLeavesNoFiles(t *testing.T) {
 		})
 	require.NoError(t, err)
 	assert.Empty(t, files)
+
+	// Nuke deletes the blobs itself, so advice to run prune is wrong.
+	assert.Contains(t, out.String(), "Backup destination store is now empty.")
+	assert.NotContains(t, out.String(), "vaultik prune")
+}
+
+// TestNukeRemoteFailsWhenADeleteFails checks that remote nuke returns an
+// error when a snapshot's metadata or a blob cannot be deleted, does not
+// report the store empty, and advises running nuke again: prune deletes
+// no metadata.
+func TestNukeRemoteFailsWhenADeleteFails(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	for _, refusedPrefix := range []string{"metadata/", "blobs/"} {
+		t.Run(refusedPrefix, func(t *testing.T) {
+			t.Parallel()
+
+			ctx := context.Background()
+			storeDir := filepath.Join(t.TempDir(), "store")
+			v, _, out := backUpToFileDestination(ctx, t, storeDir)
+
+			store := faultstore.New(v.Storage)
+			store.OnDelete = func(key string) bool {
+				return strings.HasPrefix(key, refusedPrefix)
+			}
+			v.Storage = store
+
+			require.Error(t, v.NukeRemote(true))
+
+			assert.NotContains(t, out.String(), "now empty")
+			assert.Contains(t, out.String(), "vaultik remote nuke --force")
+			assert.NotContains(t, out.String(), "vaultik prune")
+		})
+	}
+}
+
+// TestNukeRemoteRefusesAnotherDestinationWithoutRetryAdvice checks that
+// remote nuke, when the local index belongs to a different destination
+// than the configured one, fails without advising to run nuke again:
+// that run would fail the same way.
+func TestNukeRemoteRefusesAnotherDestinationWithoutRetryAdvice(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	ctx := context.Background()
+	storeDir := filepath.Join(t.TempDir(), "store")
+	v, _, out := backUpToFileDestination(ctx, t, storeDir)
+
+	v.Config.StorageURL = "file://" + filepath.Join(t.TempDir(), "elsewhere")
+
+	err := v.NukeRemote(true)
+
+	require.ErrorContains(t, err, "bound to a different backup destination")
+	assert.NotContains(t, out.String(), "vaultik remote nuke --force")
+}
+
+// TestNukeRemoteFailsWhenALocalSnapshotCannotBeRemoved checks that a
+// snapshot remote nuke cannot remove from the local index fails the
+// run: nuke then leaves that snapshot's metadata on the destination
+// store.
+func TestNukeRemoteFailsWhenALocalSnapshotCannotBeRemoved(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	ctx := context.Background()
+	storeDir := filepath.Join(t.TempDir(), "store")
+	v, _, out := backUpToFileDestination(ctx, t, storeDir)
+
+	_, err := v.DB.Conn().ExecContext(ctx, `
+		CREATE TRIGGER refuse_snapshot_delete BEFORE DELETE ON snapshots
+		BEGIN SELECT RAISE(ABORT, 'simulated index error'); END`)
+	require.NoError(t, err)
+
+	require.Error(t, v.NukeRemote(true))
+
+	assert.NotContains(t, out.String(), "now empty")
+	assert.Contains(t, out.String(), "vaultik remote nuke --force")
 }

internal/vaultik/prune.go

@@ -19,6 +19,14 @@ type PruneOptions struct {
 var errNukeRequiresForce = errors.New(
 	"nuke requires --force (this deletes ALL remote snapshots and blobs)")
 
+// errBlobDeleteFailed reports unreferenced blobs prune could not delete.
+var errBlobDeleteFailed = errors.New("blob(s) could not be deleted")
+
+// nukeCommandHint is the command suggested when a remote nuke could not
+// delete everything: running it again deletes what is left, which
+// `vaultik prune` does not do for snapshot metadata.
+const nukeCommandHint = "vaultik remote nuke --force"
+
 // metadataDirName is the top-level remote directory holding snapshot
 // metadata.
 const metadataDirName = "metadata"
@@ -39,6 +47,29 @@ func (v *Vaultik) NukeRemote(force bool) error {
 		return errNukeRequiresForce
 	}
 
+	// Checked before anything is deleted: running nuke again would fail
+	// the same way, so the advice below must not follow this error.
+	err := v.EnsureStorageBinding()
+	if err != nil {
+		return err
+	}
+
+	err = v.emptyDestinationStore()
+	if err != nil {
+		v.UI.Warningf("Run '%s' again to delete what is left on the "+
+			"backup destination store.", nukeCommandHint)
+
+		return err
+	}
+
+	v.UI.Completef("Backup destination store is now empty.")
+
+	return nil
+}
+
+// emptyDestinationStore does the deleting for NukeRemote and stops at
+// the first step that fails.
+func (v *Vaultik) emptyDestinationStore() error {
 	v.UI.Beginf("Removing all snapshot metadata from backup destination store.")
 
 	_, err := v.RemoveAllSnapshots(&RemoveOptions{Force: true})
@@ -62,8 +93,6 @@ func (v *Vaultik) NukeRemote(force bool) error {
 		}
 	}
 
-	v.UI.Completef("Backup destination store is now empty.")
-
 	return nil
 }
 
@@ -166,14 +195,17 @@ func (v *Vaultik) PruneBlobs(opts *PruneOptions) error {
 	v.deleteUnreferencedBlobs(unreferencedBlobs, allBlobs, result)
 
 	if opts.JSON {
-		return v.outputPruneBlobsJSON(result)
+		err = v.outputPruneBlobsJSON(result)
+		if err != nil {
+			return err
 		}
-
+	} else {
 		v.stdoutf("\nDeleted %d blob(s) totaling %s\n",
 			result.BlobsDeleted, ubytes(result.BytesFreed))
+	}
 
 	if result.BlobsFailed > 0 {
-		v.stdoutf("Failed to delete %d blob(s)\n", result.BlobsFailed)
+		return fmt.Errorf("%d %w", result.BlobsFailed, errBlobDeleteFailed)
 	}
 
 	return nil

internal/vaultik/prune_delete_failure_test.go

@@ -0,0 +1,98 @@
+package vaultik_test
+
+import (
+	"context"
+	"encoding/json"
+	"os"
+	"path/filepath"
+	"strings"
+	"testing"
+
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/require"
+	"sneak.berlin/go/vaultik/internal/log"
+	"sneak.berlin/go/vaultik/internal/storage/faultstore"
+	"sneak.berlin/go/vaultik/internal/vaultik"
+)
+
+// refuseBlobDeletes is an OnDelete hook that fails every blob delete.
+func refuseBlobDeletes(key string) bool {
+	return strings.HasPrefix(key, "blobs/")
+}
+
+// TestPruneBlobs_FailedDeleteReturnsError checks that prune returns an
+// error, so the command exits non-zero, when an unreferenced blob cannot
+// be deleted.
+func TestPruneBlobs_FailedDeleteReturnsError(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	env := newListEnv(t)
+
+	// The store holds no manifest, so nothing references this blob.
+	addBlob(t, env.store.testStorer, testBlobHashA)
+
+	store := faultstore.New(env.store)
+	store.OnDelete = refuseBlobDeletes
+	env.v.Storage = store
+
+	err := env.v.PruneBlobs(&vaultik.PruneOptions{Force: true})
+
+	require.ErrorContains(t, err, "1 blob(s) could not be deleted")
+}
+
+// TestPruneBlobs_JSONFailedDeleteReturnsError checks that prune --json
+// prints its document and then returns an error when an unreferenced
+// blob cannot be deleted.
+func TestPruneBlobs_JSONFailedDeleteReturnsError(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	env := newListEnv(t)
+	addBlob(t, env.store.testStorer, testBlobHashA)
+
+	store := faultstore.New(env.store)
+	store.OnDelete = refuseBlobDeletes
+	env.v.Storage = store
+
+	err := env.v.PruneBlobs(&vaultik.PruneOptions{JSON: true})
+
+	require.Error(t, err, "prune must fail when a blob cannot be deleted")
+
+	var result vaultik.PruneBlobsResult
+
+	require.NoError(t, json.Unmarshal(env.stdout.Bytes(), &result),
+		"stdout must hold the JSON document, got:\n%s", env.stdout.String())
+	assert.Equal(t, 1, result.BlobsFailed)
+	assert.Equal(t, 0, result.BlobsDeleted)
+}
+
+// TestCreateSnapshotPrune_FailedBlobDeleteReturnsError checks that the
+// prune step of snapshot create --prune fails the run when an
+// unreferenced blob cannot be deleted.
+func TestCreateSnapshotPrune_FailedBlobDeleteReturnsError(t *testing.T) {
+	log.Initialize(log.Config{})
+	t.Parallel()
+
+	ctx := context.Background()
+	storeDir := filepath.Join(t.TempDir(), "store")
+	v, _, _ := backUpToFileDestination(ctx, t, storeDir)
+
+	// No snapshot references this blob, so the prune step deletes it.
+	orphan := filepath.Join(storeDir, "blobs", testBlobHashA[:2],
+		testBlobHashA[2:4], testBlobHashA)
+	require.NoError(t, os.MkdirAll(filepath.Dir(orphan), 0o750))
+	require.NoError(t, os.WriteFile(orphan, []byte("orphan"), 0o600))
+
+	store := faultstore.New(v.Storage)
+	store.OnDelete = refuseBlobDeletes
+	v.Storage = store
+
+	err := v.CreateSnapshot(&vaultik.SnapshotCreateOptions{
+		Cron:  true,
+		Prune: true,
+	})
+
+	require.ErrorContains(t, err, "1 blob(s) could not be deleted")
+	assert.FileExists(t, orphan)
+}

internal/vaultik/remove_snapshot_test.go

@@ -476,7 +476,8 @@ func TestRemoveAllSnapshots_WithForce(t *testing.T) {
 	out := tv.Stdout.String()
 	assert.Contains(t, out, "Removed 2 snapshot(s)")
 	assert.Contains(t, out, "Removed snapshot metadata from remote storage")
-	assert.Contains(t, out, "vaultik prune")
+	// Remote nuke, the only caller, deletes the blobs next itself.
+	assert.NotContains(t, out, "vaultik prune")
 }
 
 func TestRemoveAllSnapshots_DryRun(t *testing.T) {

internal/vaultik/restore.go

@@ -702,6 +702,8 @@ func (v *Vaultik) downloadSnapshotDB(
 		return nil, "", fmt.Errorf("downloading %s: %w", dbKey, err)
 	}
 
+	reader = newCloseOnCancelReader(v.ctx, reader)
+
 	defer func() { _ = reader.Close() }()
 
 	// Decrypt and decompress straight from the storage stream, then stream

internal/vaultik/restore_interrupt_test.go

@@ -207,30 +207,37 @@ func TestRestoreSkipErrorsCancelDuringBlobDownload(t *testing.T) {
 		"the cancel was reported as a failed file")
 }
 
-// stallingBlobStorer wraps a Storer so that every blob download hands
+// stallingStorer wraps a Storer so that each download of a key chosen by
-// over the first half of the blob and then stalls, ignoring the context,
+// stalls hands over the first half of the object and then stalls,
-// as a file:// blob on a hung USB stick or network share does. Only
+// ignoring the context, as a file:// read on a hung USB stick or network
-// closing the returned reader ends the stall.
+// share does. Only closing the returned reader ends the stall.
-type stallingBlobStorer struct {
+type stallingStorer struct {
 	storage.Storer
 
+	stalls  func(key string) bool
 	once    sync.Once
 	stalled chan struct{}
 }
 
-func newStallingBlobStorer(inner storage.Storer) *stallingBlobStorer {
+func newStallingStorer(
-	return &stallingBlobStorer{Storer: inner, stalled: make(chan struct{})}
+	inner storage.Storer, stalls func(key string) bool,
+) *stallingStorer {
+	return &stallingStorer{
+		Storer:  inner,
+		stalls:  stalls,
+		stalled: make(chan struct{}),
+	}
 }
 
-func (s *stallingBlobStorer) Get(
+func (s *stallingStorer) Get(
 	ctx context.Context, key string,
 ) (io.ReadCloser, error) {
 	rc, err := s.Storer.Get(ctx, key)
-	if err != nil || !strings.HasPrefix(key, "blobs/") {
+	if err != nil || !s.stalls(key) {
 		return rc, err
 	}
 
-	blob, err := io.ReadAll(rc)
+	object, err := io.ReadAll(rc)
 	_ = rc.Close()
 
 	if err != nil {
@@ -242,7 +249,7 @@ func (s *stallingBlobStorer) Get(
 	pr, pw := io.Pipe()
 
 	go func() {
-		_, _ = pw.Write(blob[:len(blob)/2])
+		_, _ = pw.Write(object[:len(object)/2])
 
 		s.once.Do(func() { close(s.stalled) })
 	}()
@@ -250,17 +257,26 @@ func (s *stallingBlobStorer) Get(
 	return pr, nil
 }
 
-// TestInterruptDuringStalledBlobReadCleansTempDir stops a restore and a
+// TestInterruptDuringStalledReadCleansTempDir stops a restore and a deep
-// deep verify while a blob read is stalled on a source that ignores the
+// verify while a read of a blob or of the snapshot database is stalled
-// context. Stopping must end that read, so the operation unwinds and
+// on a source that ignores the context. Stopping must end that read, so
-// removes its decrypted scratch files well within the shutdown timeout
+// the operation unwinds and removes its decrypted scratch files well
-// (issue #325).
+// within the shutdown timeout (issues #325 and #356).
 //
 // Not parallel: it points TMPDIR at a private directory (via t.Setenv)
 // so it can assert on exactly the scratch files the operation created.
-func TestInterruptDuringStalledBlobReadCleansTempDir(t *testing.T) {
+func TestInterruptDuringStalledReadCleansTempDir(t *testing.T) {
 	log.Initialize(log.Config{})
 
+	stalledReads := map[string]func(key string) bool{
+		"blob": func(key string) bool {
+			return strings.HasPrefix(key, "blobs/")
+		},
+		"snapshot database": func(key string) bool {
+			return strings.HasSuffix(key, "/db.zst.age")
+		},
+	}
+
 	operations := map[string]func(v *Vaultik, snapshotID, targetDir string) error{
 		"restore": func(v *Vaultik, snapshotID, targetDir string) error {
 			return v.Restore(&RestoreOptions{
@@ -273,8 +289,9 @@ func TestInterruptDuringStalledBlobReadCleansTempDir(t *testing.T) {
 		},
 	}
 
-	for name, op := range operations {
+	for readName, stalls := range stalledReads {
-		t.Run(name, func(t *testing.T) {
+		for opName, op := range operations {
+			t.Run(readName+" read during "+opName, func(t *testing.T) {
 				fs := afero.NewOsFs()
 				root := t.TempDir()
 
@@ -287,7 +304,7 @@ func TestInterruptDuringStalledBlobReadCleansTempDir(t *testing.T) {
 				require.NoError(t, fs.MkdirAll(scratch, 0o755))
 				t.Setenv("TMPDIR", scratch)
 
-			stalling := newStallingBlobStorer(storer)
+				stalling := newStallingStorer(storer, stalls)
 
 				ctx, cancel := context.WithCancel(context.Background())
 				defer cancel()
@@ -304,10 +321,14 @@ func TestInterruptDuringStalledBlobReadCleansTempDir(t *testing.T) {
 				select {
 				case <-stalling.stalled:
 				case <-time.After(30 * time.Second):
-				t.Fatal("the operation never reached a blob read")
+					t.Fatal("the operation never reached the stalled read")
 				}
 
-			require.NotEmpty(t, scratchEntries(t, scratch),
+				// The snapshot database's temp directory is created just
+				// after its read starts, so it can appear after the stall.
+				require.Eventually(t, func() bool {
+					return len(scratchEntries(t, scratch)) > 0
+				}, 10*time.Second, 10*time.Millisecond,
 					"expected decrypted scratch files to exist mid-read")
 
 				stopCtx, stopCancel := context.WithTimeout(
@@ -315,10 +336,11 @@ func TestInterruptDuringStalledBlobReadCleansTempDir(t *testing.T) {
 				defer stopCancel()
 
 				require.True(t, stop(stopCtx),
-				"stop timed out; the stalled blob read was not interrupted")
+					"stop timed out; the stalled read was not interrupted")
 				require.ErrorIs(t, opErr, context.Canceled)
 				require.Empty(t, scratchEntries(t, scratch),
 					"decrypted scratch files remained after the interrupt")
 			})
 		}
 	}
+}

internal/vaultik/snapshot.go

@@ -25,6 +25,7 @@ var (
 	errSnapshotVerifyFailed = errors.New("verification failed")
 	errRemoveAllNeedsForce  = errors.New("--all requires --force")
 	errSnapshotNotFound     = errors.New("snapshot not found")
+	errSnapshotRemoveFailed = errors.New("snapshot(s) could not be removed")
 	errInvalidTableName     = errors.New("invalid table name")
 	errNoAgeRecipients      = errors.New(
 		"creating a snapshot needs at least one public key in " +
@@ -1591,8 +1592,8 @@ func (v *Vaultik) handleRemoveAllDryRun(
 
 // executeRemoveAll deletes every local snapshot and, unless LocalOnly
 // is set, every corresponding remote metadata directory plus any
-// orphan remote keys. Blobs are not touched; the printed prune-command
+// orphan remote keys. Blobs are not touched. It returns an error when
-// hint is the next step.
+// any snapshot could not be removed.
 func (v *Vaultik) executeRemoveAll(
 	localSnaps, orphanRemoteKeys []string, opts *RemoveOptions,
 ) (*RemoveResult, error) {
@@ -1606,18 +1607,11 @@ func (v *Vaultik) executeRemoveAll(
 
 	result := &RemoveResult{}
 
-	remoteErrors := v.removeAllLocalSnapshots(localSnaps, opts, result)
+	failures := v.removeAllLocalSnapshots(localSnaps, opts, result)
 
 	if !opts.LocalOnly {
-		remoteErrors += v.removeAllOrphanRemotes(orphanRemoteKeys, result)
+		failures += v.removeAllOrphanRemotes(orphanRemoteKeys, result)
-
+		result.RemoteRemoved = failures == 0
-		if remoteErrors == 0 {
-			result.RemoteRemoved = true
-		} else if v.UI != nil {
-			v.UI.Warningf("Some remote metadata deletions failed. Run '%s' "+
-				"once the remote is healthy to clean up unreferenced blobs.",
-				pruneCommandHint)
-		}
 	}
 
 	if v.SnapshotManager != nil {
@@ -1627,6 +1621,10 @@ func (v *Vaultik) executeRemoveAll(
 		}
 	}
 
+	if failures > 0 {
+		return result, fmt.Errorf("%d %w", failures, errSnapshotRemoveFailed)
+	}
+
 	if opts.JSON {
 		return result, v.outputRemoveJSON(result)
 	}
@@ -1635,9 +1633,6 @@ func (v *Vaultik) executeRemoveAll(
 
 	if !opts.LocalOnly && result.RemoteRemoved {
 		v.printlnStdout("Removed snapshot metadata from remote storage")
-		v.stdoutf("\nNote: Removed snapshots' blobs remain on the remote. "+
-			"Run '%s' to delete any blobs no longer referenced by any "+
-			"remaining remote snapshot.\n", pruneCommandHint)
 	}
 
 	return result, nil
@@ -1680,12 +1675,13 @@ func (v *Vaultik) deleteIncompleteSnapshot(snapshotIDStr string, id any) bool {
 }
 
 // removeAllLocalSnapshots removes each known local snapshot (and, unless
-// --local-only, its remote metadata), returning the number of remote
+// --local-only, its remote metadata), returning the number of snapshots
-// deletion failures.
+// it could not remove. A snapshot left in the local index keeps its
+// remote metadata too, since it is not an orphan remote key.
 func (v *Vaultik) removeAllLocalSnapshots(
 	localSnaps []string, opts *RemoveOptions, result *RemoveResult,
 ) int {
-	remoteErrors := 0
+	failures := 0
 
 	for _, snapshotID := range localSnaps {
 		log.Info("Removing snapshot", "snapshot_id", snapshotID)
@@ -1695,6 +1691,8 @@ func (v *Vaultik) removeAllLocalSnapshots(
 			log.Error("Failed to remove from local database",
 				"snapshot_id", snapshotID, "error", err)
 
+			failures++
+
 			continue
 		}
 
@@ -1705,14 +1703,14 @@ func (v *Vaultik) removeAllLocalSnapshots(
 				log.Warn("Failed to remove snapshot metadata from remote",
 					"snapshot_id", snapshotID, "error", err)
 
-				remoteErrors++
+				failures++
 			}
 		}
 
 		result.SnapshotsRemoved = append(result.SnapshotsRemoved, snapshotID)
 	}
 
-	return remoteErrors
+	return failures
 }
 
 // removeAllOrphanRemotes deletes remote snapshot metadata that has no

internal/vaultik/verify.go

@@ -17,6 +17,7 @@ import (
 	"sneak.berlin/go/vaultik/internal/database"
 	"sneak.berlin/go/vaultik/internal/log"
 	"sneak.berlin/go/vaultik/internal/snapshot"
+	"sneak.berlin/go/vaultik/internal/storage"
 )
 
 // Sentinel errors for snapshot verification failures.
@@ -33,6 +34,8 @@ var (
 	errManifestMissingBlob = errors.New(
 		"manifest omits blob present in database")
 	errBlobSizeMismatch  = errors.New("blob size mismatch")
+	errBlobsNotInStorage = errors.New(
+		"blobs missing from storage or stored with the wrong size")
 )
 
 // verifyStatusFailed is the JSON status value for a failed verification.
@@ -149,7 +152,6 @@ func (v *Vaultik) RunDeepVerify(snapshotID string, opts *VerifyOptions) error {
 	}
 
 	result.Status = "ok"
-	result.Verified = len(dbBlobs)
 
 	if opts.JSON {
 		return v.outputVerifyJSON(result)
@@ -260,6 +262,8 @@ func (v *Vaultik) downloadVerifiedSnapshotDB(
 			fmt.Errorf("failed to download database: %w", err))
 	}
 
+	dbReader = newCloseOnCancelReader(v.ctx, dbReader)
+
 	defer func() { _ = dbReader.Close() }()
 
 	tdb, err := v.decryptAndLoadDatabase(dbReader, identities)
@@ -304,7 +308,7 @@ func (v *Vaultik) runVerificationSteps(
 		v.stdoutf("Checking blob existence in remote storage...\n")
 	}
 
-	err = v.verifyBlobExistenceFromDB(dbBlobs)
+	err = v.verifyBlobExistenceFromDB(dbBlobs, result)
 	if err != nil {
 		return v.deepVerifyFailure(result, opts, err.Error(), err)
 	}
@@ -315,7 +319,8 @@ func (v *Vaultik) runVerificationSteps(
 			len(dbBlobs), ubytes(totalSize))
 	}
 
-	err = v.performDeepVerificationFromDB(dbBlobs, tdb.db.Conn(), opts, identities)
+	err = v.performDeepVerificationFromDB(
+		dbBlobs, tdb.db.Conn(), opts, result, identities)
 	if err != nil {
 		return v.deepVerifyFailure(result, opts, err.Error(), err)
 	}
@@ -667,8 +672,14 @@ func (v *Vaultik) verifyManifestAgainstDatabase(
 	return nil
 }
 
-// verifyBlobExistenceFromDB checks that all blobs from database exist in S3
+// verifyBlobExistenceFromDB checks that every blob from the database is
-func (v *Vaultik) verifyBlobExistenceFromDB(blobs []snapshot.BlobInfo) error {
+// in storage with the size the database records. It checks them all,
+// counting the missing and wrong-size blobs in result, and fails if it
+// found any. Any storage error other than not found stops the check and
+// fails with that error.
+func (v *Vaultik) verifyBlobExistenceFromDB(
+	blobs []snapshot.BlobInfo, result *VerifyResult,
+) error {
 	log.Info("Verifying blob existence in S3", "blob_count", len(blobs))
 
 	for i, blob := range blobs {
@@ -681,17 +692,23 @@ func (v *Vaultik) verifyBlobExistenceFromDB(blobs []snapshot.BlobInfo) error {
 		// Construct blob path
 		blobPath := fmt.Sprintf("blobs/%s/%s/%s", blob.Hash[:2], blob.Hash[2:4], blob.Hash)
 
-		// Check blob exists
 		stat, err := v.Storage.Stat(v.ctx, blobPath)
-		if err != nil {
+		switch {
-			return fmt.Errorf("blob %s missing from storage: %w", blob.Hash, err)
+		case errors.Is(err, storage.ErrNotFound):
-		}
+			log.Warn("Blob missing from storage", "hash", blob.Hash)
 
-		// Verify size matches
+			result.Missing++
-		if stat.Size != blob.CompressedSize {
+			result.MissingSize += blob.CompressedSize
-			return fmt.Errorf(
+		case err != nil:
-				"%w: blob %s: S3 has %d bytes, database has %d bytes",
+			return fmt.Errorf("checking blob %s in storage: %w",
-				errBlobSizeMismatch, blob.Hash, stat.Size, blob.CompressedSize)
+				blob.Hash, err)
+		case stat.Size != blob.CompressedSize:
+			log.Warn("Blob has the wrong size in storage",
+				"hash", blob.Hash,
+				"storage_size", stat.Size,
+				"database_size", blob.CompressedSize)
+
+			result.Mismatched++
 		}
 
 		// Progress update every 100 blobs
@@ -705,16 +722,22 @@ func (v *Vaultik) verifyBlobExistenceFromDB(blobs []snapshot.BlobInfo) error {
 		}
 	}
 
+	if result.Missing > 0 || result.Mismatched > 0 {
+		return fmt.Errorf("%w: %d missing, %d with the wrong size",
+			errBlobsNotInStorage, result.Missing, result.Mismatched)
+	}
+
 	log.Info("✓ All blobs exist in storage")
 
 	return nil
 }
 
 // performDeepVerificationFromDB downloads and verifies the content of
-// each blob using the database as source.
+// each blob using the database as source, stopping at the first blob that
+// fails. Each blob that passes is counted in result.Verified.
 func (v *Vaultik) performDeepVerificationFromDB(
 	blobs []snapshot.BlobInfo, db *sql.DB, opts *VerifyOptions,
-	identities []age.Identity,
+	result *VerifyResult, identities []age.Identity,
 ) error {
 	// Calculate total bytes for ETA
 	var totalBytesExpected int64
@@ -737,6 +760,7 @@ func (v *Vaultik) performDeepVerificationFromDB(
 			return fmt.Errorf("blob %s verification failed: %w", blobInfo.Hash, err)
 		}
 
+		result.Verified++
 		bytesProcessed += blobInfo.CompressedSize
 		elapsed := time.Since(startTime)
 		remaining := len(blobs) - (i + 1)