Keep the progress line of a multi-path snapshot within 100% (closes #271)

One progress reporter spans every path of a snapshot. Its counts of
files and bytes processed run across all the paths, while the totals
they were divided by were reset to each path's own, so a second path
smaller than the first showed more than 100% and an ETA of `unknown`.
The totals now add up over the paths scanned so far, and the
processing start time the rate is measured from is the first path's.
SetTotalSize is renamed AddTotalSize because it now adds.

The issue says the ETA went negative; it was computed negative and
printed as `unknown`.

Model: opus-5-5

TODO.md

@@ -22,6 +22,15 @@ the tag exists and is exercised; what is left is merging `next` to
 
 # Completed Steps
 
+- 2026-10-08: Kept the progress line of a snapshot with more than one
+  path within 100%
+  ([issue #271](https://git.eeqj.de/sneak/vaultik/issues/271)). The
+  bytes and files processed counted every path, but the totals they
+  were divided by held only the current path's, so a second path
+  smaller than the first showed more than 100% and an ETA of `unknown`.
+  The totals now add up over the paths scanned so far, and the rate is
+  measured from when the first path's processing started.
+
 - 2026-10-08: Made a second `snapshot create` of one name succeed when
   it starts in the same second as the first
   ([issue #270](https://git.eeqj.de/sneak/vaultik/issues/270)). The

internal/snapshot/progress.go

@@ -67,9 +67,9 @@ type ProgressStats struct {
 	BlobsUploaded    atomic.Int64
 	BytesUploaded    atomic.Int64
 	CurrentFile      atomic.Value // stores string
-	TotalSize        atomic.Int64 // Total size to process (set after scan phase)
+	TotalSize        atomic.Int64 // Size to process in the paths scanned so far
-	TotalFiles       atomic.Int64 // Total files to process in phase 2
+	TotalFiles       atomic.Int64 // Files to process in the paths scanned so far
-	ProcessStartTime atomic.Value // stores time.Time when processing starts
+	ProcessStartTime atomic.Value // stores time.Time; set by the first path
 	StartTime        time.Time
 	mu               sync.RWMutex
 	lastDetailTime   time.Time
@@ -148,10 +148,17 @@ func (pr *ProgressReporter) GetStats() *ProgressStats {
 	return pr.stats
 }
 
-// SetTotalSize sets the total size to process (after scan phase)
+// AddTotalSize adds the size one path of the snapshot has to process to
-func (pr *ProgressReporter) SetTotalSize(size int64) {
+// the total, once that path's scan phase is done. The processed counts
-	pr.stats.TotalSize.Store(size)
+// run across every path, so the total does too, and the processing start
-	pr.stats.ProcessStartTime.Store(time.Now().UTC())
+// time, which the rate is measured from, is the first path's.
+func (pr *ProgressReporter) AddTotalSize(size int64) {
+	pr.stats.TotalSize.Add(size)
+
+	_, started := pr.stats.ProcessStartTime.Load().(time.Time)
+	if !started {
+		pr.stats.ProcessStartTime.Store(time.Now().UTC())
+	}
 }
 
 // Helper functions

internal/snapshot/progress_test.go

@@ -0,0 +1,94 @@
+package snapshot_test
+
+import (
+	"context"
+	"path/filepath"
+	"strings"
+	"testing"
+
+	"github.com/spf13/afero"
+	"sneak.berlin/go/vaultik/internal/database"
+	"sneak.berlin/go/vaultik/internal/snapshot"
+)
+
+// TestProgressPercentWithSecondPathSmaller backs up two paths with one
+// scanner, as a snapshot with two paths does, the second path smaller
+// than the first. The progress line divides the bytes processed by the
+// total size, so both must count both paths to stay within 100%.
+func TestProgressPercentWithSecondPathSmaller(t *testing.T) {
+	t.Parallel()
+
+	fs := afero.NewMemMapFs()
+	files := map[string]string{
+		"/large/one.txt":   strings.Repeat("1", 4000),
+		"/large/two.txt":   strings.Repeat("2", 4000),
+		"/small/three.txt": strings.Repeat("3", 1000),
+	}
+
+	for path, content := range files {
+		err := fs.MkdirAll(filepath.Dir(path), 0755)
+		if err != nil {
+			t.Fatalf("mkdir: %v", err)
+		}
+
+		err = afero.WriteFile(fs, path, []byte(content), 0644)
+		if err != nil {
+			t.Fatalf("write %s: %v", path, err)
+		}
+	}
+
+	db, err := database.NewTestDB()
+	if err != nil {
+		t.Fatalf("create test db: %v", err)
+	}
+
+	t.Cleanup(func() {
+		cerr := db.Close()
+		if cerr != nil {
+			t.Errorf("close db: %v", cerr)
+		}
+	})
+
+	repos := database.NewRepositories(db)
+
+	scanner := snapshot.NewScanner(snapshot.ScannerConfig{
+		FS:               fs,
+		ChunkSize:        int64(1024 * 16),
+		Repositories:     repos,
+		MaxBlobSize:      int64(1024 * 1024),
+		CompressionLevel: 3,
+		AgeRecipients:    []string{testAgePublicKey},
+		EnableProgress:   true,
+	})
+
+	// Never started, but Stop releases its tickers and signal handler.
+	progress := scanner.GetProgress()
+	defer progress.Stop()
+
+	ctx := context.Background()
+	snapshotID := "test-snapshot-progress"
+	createTestSnapshotRecord(ctx, t, repos, snapshotID)
+
+	for _, path := range []string{"/large", "/small"} {
+		_, err := scanner.Scan(ctx, path, snapshotID)
+		if err != nil {
+			t.Fatalf("scanning %s: %v", path, err)
+		}
+	}
+
+	stats := progress.GetStats()
+
+	// Directories count toward the total size but produce no chunks, so
+	// the percentage ends just under 100%.
+	percent := float64(stats.BytesProcessed.Load()) /
+		float64(stats.TotalSize.Load()) * 100
+	if percent > 100 {
+		t.Errorf("progress after both paths is %.1f%%, want at most 100%%",
+			percent)
+	}
+
+	if stats.FilesProcessed.Load() != stats.TotalFiles.Load() {
+		t.Errorf("progress after both paths is %d of %d files, want all",
+			stats.FilesProcessed.Load(), stats.TotalFiles.Load())
+	}
+}

internal/snapshot/scanner.go

@@ -407,8 +407,8 @@ func (s *Scanner) summarizeScanPhase(
 	}
 
 	if s.progress != nil {
-		s.progress.SetTotalSize(totalSizeToProcess)
+		s.progress.AddTotalSize(totalSizeToProcess)
-		s.progress.GetStats().TotalFiles.Store(int64(len(filesToProcess)))
+		s.progress.GetStats().TotalFiles.Add(int64(len(filesToProcess)))
 	}
 
 	log.Info("Phase 1 complete",