Health check test uses addresses nothing can listen on (closes #158)

TestHealthCheck closed the app's server, and later smallwebwaf, and
expected connections to the freed ports to fail. Another test could take
such a port in between, so the connection succeeded and the test failed.

The failing app check now uses the multicast address 224.0.0.1, to which
TCP cannot connect. The failing smallwebwaf check uses port 0, on which
nothing listens. Neither result depends on other processes. The code
under test is unchanged.

Model: opus-5-5

README.md

@@ -17,10 +17,10 @@ reference documents under [`docs/`](docs/) are listed under "Documents" below.
 ## What it protects against
 
 - Scrapers that fetch every page of a site, all day. Rate limiting gives each
-  client 1000 requests a minute, 10,000 an hour and 50,000 a day. Byte limits
+  client 6000 requests a minute, 100,000 an hour and 1,000,000 a day. Byte
-  give it 10 GiB a minute, 20 GiB an hour and 50 GiB a day. A client over a
+  limits give it 4 GiB a minute, 20 GiB an hour and 200 GiB a day. A client over
-  limit is refused and banned. The first ban lasts an hour. Each repeat within a
+  a limit is refused and banned. The first ban lasts an hour. Each repeat within
-  day makes the next ban three times as long. A ban that would last more than
+  a day makes the next ban three times as long. A ban that would last more than
   seven days is permanent.
 - Scanners that probe for secrets, such as `/.env` or `/.git/config`. The
   default rule file bans such a client for seven days at its first probe. Its

SPEC.md

@@ -368,16 +368,23 @@ Conventions:
 - `SWWAF_ALLOW_NETS` skips the checks step 3 names, for monitoring or the
   owner's own networks. `SWWAF_RATE_LIMIT_EXEMPT_NETS` bypasses the request and
   byte limits only; the error burst, attack detection and bans still apply.
-- Many clients share one address (mobile carriers, offices, Tor), and so share
+- Many people can share one address, as in an office, on a mobile carrier or
-  its limits and its bans. `SWWAF_ALLOW_NETS` and `SWWAF_RATE_LIMIT_EXEMPT_NETS`
+  through Tor. They are one client, and share its limits and its bans. The
-  take known shared addresses out.
+  default limits are sized for about 40 busy people on one address. A known
+  shared address busier than that belongs in `SWWAF_ALLOW_NETS` or
+  `SWWAF_RATE_LIMIT_EXEMPT_NETS`.
 
 ### Request rate limits, per client
 
-Breaking one bans the client, so the defaults sit several times above what one
+Breaking one bans the client, so the defaults sit about twice above what 40
-busy person produces. A browser loading a heavy page makes a few hundred
+people busy with heavy web apps make together on one address. Each such person
-requests, and a git clone a handful. A machine that talks to the app all day can
+makes about 75 requests in a busy minute, and 1,250 an hour for ten hours a day.
-still pass the day limit. Its address belongs in `SWWAF_RATE_LIMIT_EXEMPT_NETS`.
+
+A client slower than those 40 people cannot be told from them by counting. Only
+the other checks can catch an abuser that slow. They include the trap paths, the
+rule files, the Core Rule Set and the blocklists. An abuser that trips none of
+them is not caught. A machine that talks to the app all day can still pass the
+day limit. Its address belongs in `SWWAF_RATE_LIMIT_EXEMPT_NETS`.
 
 `SWWAF_RATE_LIMIT_EXEMPT_PATHS` takes path prefixes out of the count, such as
 static assets or health checks; their bytes are not counted either. A prefix is
@@ -390,9 +397,12 @@ matched the same way.
 
 ### Byte limits, per client
 
-A response's bytes are counted when it ends (see step 15). So every default sits
+Each of the same 40 people moves about 256 MiB an hour, for ten hours a day. The
-above the largest request and answer together, and no single download breaks a
+hour and day limits sit about twice above what they move together. A response's
-limit.
+bytes are counted when it ends (see step 15). So the minute limit holds two of
+the largest responses, with their requests, ending in the same minute. No single
+download then breaks a limit. An operator who raises `SWWAF_RESPONSE_MAX_BYTES`
+raises the byte limits with it.
 
 ### Size and time limits
 

docs/alerts.md

@@ -42,7 +42,7 @@ on one line:
     "asn": "",
     "as_name": "",
     "country": "",
-    "reason": "requests per minute over the limit of 1000",
+    "reason": "requests per minute over the limit of 6000",
     "detail": {
         "ban_expires": "2026-10-06T13:00:00.123Z",
         "cause": "limit",
@@ -51,9 +51,9 @@ on one line:
             "as_name": "",
             "country": "",
             "kind": "requests",
-            "limit": 1000,
+            "limit": 6000,
             "window": "minute",
-            "count": 1001,
+            "count": 6001,
             "request": {
                 "time": "2026-10-06T12:00:00.123456789Z",
                 "method": "GET",
@@ -62,7 +62,7 @@ on one line:
                 "status": 403,
                 "user_agent": "scraper/1.0"
             },
-            "requests": 5210,
+            "requests": 8210,
             "refused": 0,
             "earlier_bans": {
                 "limit": 0,
@@ -89,7 +89,7 @@ on one line:
 - `asn`, `as_name` and `country`: the client's, as known when the alert was
   raised. They are empty when GeoJS had not answered yet.
 - `reason`: a short sentence, such as
-  `requests per minute over the limit of 1000` or `listed by a blocklist`.
+  `requests per minute over the limit of 6000` or `listed by a blocklist`.
 - `detail`: what is particular to the event:
     - for a ban, its `cause`, `ban_expires` and `notes` (the notes are listed
       under `bans.json` in [`state-files.md`](state-files.md));

docs/gitea.md

@@ -11,8 +11,10 @@ checked again when gitea or the Core Rule Set changes version.
 
 - SSH access to gitea does not pass through `smallwebwaf` and is not protected
   by it.
-- A clone is a response. It fits the defaults of 30 minutes and 5 GiB for all
+- A clone is a response. It fits the defaults of 30 minutes and 1 GiB unless the
-  but the largest repositories and slowest links.
+  repository is large or the link slow. A repository whose clone is larger than
+  1 GiB needs `SWWAF_RESPONSE_MAX_BYTES` raised, and the byte limits with it
+  ("Byte limits, per client" in `SPEC.md`).
 - A push is a request, and so is every other upload:
     - a git push;
     - an LFS object;
@@ -30,12 +32,13 @@ checked again when gitea or the Core Rule Set changes version.
   request limits do most of the work there.
 - An Actions runner that reaches gitea through `smallwebwaf` sends requests all
   day. One older than version 0.4 (April 2026) asks for work every 2 seconds,
-  43,200 requests a day, and reports a running job's log and state every second.
+  43,200 requests a day. While it runs a job, it reports the job's log and state
-  So it passes the day limit of 50,000 after about an hour and a quarter of
+  every second instead, two requests a second. So one runner busy all day sends
-  jobs. It is then banned, the job it is running fails, and each repeat within a
+  172,800 requests, under the request limits. Six such runners on one address,
-  day makes the ban longer. Newer runners ask less often, but a busy one, or
+  each busy all day, pass the day limit of 1,000,000 within two days; five stay
-  several on one address, can still pass it. Put the runners' addresses in
+  under it. Their address is then banned, their running jobs fail, and each
-  `SWWAF_RATE_LIMIT_EXEMPT_NETS`.
+  repeat within a day makes the ban longer. Newer runners ask for work less
+  often. Put the runners' addresses in `SWWAF_RATE_LIMIT_EXEMPT_NETS`.
 
 ## What the Core Rule Set lets through
 

docs/settings.md

@@ -99,16 +99,16 @@ that take `off`, the `_FILE` form, and what each group does and why.
 
 ## Request rate limits, per client
 
-- `SWWAF_RATE_LIMIT_PER_MINUTE` (default `1000`), `SWWAF_RATE_LIMIT_PER_HOUR`
+- `SWWAF_RATE_LIMIT_PER_MINUTE` (default `6000`), `SWWAF_RATE_LIMIT_PER_HOUR`
-  (default `10000`) and `SWWAF_RATE_LIMIT_PER_DAY` (default `50000`): the most
+  (default `100000`) and `SWWAF_RATE_LIMIT_PER_DAY` (default `1000000`): the
-  requests a client may make in each window. A count or `off`.
+  most requests a client may make in each window. A count or `off`.
 - `SWWAF_RATE_LIMIT_EXEMPT_PATHS` (default empty): path prefixes exempt from
   rate limiting and the byte limits, such as `/assets/`.
 
 ## Byte limits, per client
 
-- `SWWAF_BYTES_LIMIT_PER_MINUTE` (default `10G`), `SWWAF_BYTES_LIMIT_PER_HOUR`
+- `SWWAF_BYTES_LIMIT_PER_MINUTE` (default `4G`), `SWWAF_BYTES_LIMIT_PER_HOUR`
-  (default `20G`) and `SWWAF_BYTES_LIMIT_PER_DAY` (default `50G`): the most
+  (default `20G`) and `SWWAF_BYTES_LIMIT_PER_DAY` (default `200G`): the most
   bytes counted for a client in each window. A size or `off`.
 - `SWWAF_BYTES_COUNT` (default `both`): which body bytes the byte limits count:
   `response`, `request` or `both`.
@@ -131,7 +131,7 @@ that take `off`, the `_FILE` form, and what each group does and why.
   to send its whole answer. A duration or `off`.
 - `SWWAF_REQUEST_MAX_BYTES` (default `100M`): the largest request body. A size
   or `off`.
-- `SWWAF_RESPONSE_MAX_BYTES` (default `5G`): the largest response body. A size
+- `SWWAF_RESPONSE_MAX_BYTES` (default `1G`): the largest response body. A size
   or `off`.
 
 ## Lookup of AS number and country

internal/config/config.go

@@ -502,17 +502,17 @@ func FromEnvironment(lookupEnv func(string) (string, bool)) (*Config, error) {
 		UpstreamRequestTimeout:  env.duration("SWWAF_UPSTREAM_REQUEST_TIMEOUT", "60s"),
 		UpstreamResponseTimeout: env.duration("SWWAF_UPSTREAM_RESPONSE_TIMEOUT", "30m"),
 		RequestMaxBytes:         env.size("SWWAF_REQUEST_MAX_BYTES", "100M"),
-		ResponseMaxBytes:        env.size("SWWAF_RESPONSE_MAX_BYTES", "5G"),
+		ResponseMaxBytes:        env.size("SWWAF_RESPONSE_MAX_BYTES", "1G"),
 		AllowNets:               env.netblocks("SWWAF_ALLOW_NETS", ""),
 		RateLimitExemptNets:     env.netblocks("SWWAF_RATE_LIMIT_EXEMPT_NETS", ""),
 		DenyNets:                env.netblocks("SWWAF_DENY_NETS", ""),
-		RateLimitPerMinute:      env.count("SWWAF_RATE_LIMIT_PER_MINUTE", "1000"),
+		RateLimitPerMinute:      env.count("SWWAF_RATE_LIMIT_PER_MINUTE", "6000"),
-		RateLimitPerHour:        env.count("SWWAF_RATE_LIMIT_PER_HOUR", "10000"),
+		RateLimitPerHour:        env.count("SWWAF_RATE_LIMIT_PER_HOUR", "100000"),
-		RateLimitPerDay:         env.count("SWWAF_RATE_LIMIT_PER_DAY", "50000"),
+		RateLimitPerDay:         env.count("SWWAF_RATE_LIMIT_PER_DAY", "1000000"),
 		RateLimitExemptPaths:    env.pathPrefixes("SWWAF_RATE_LIMIT_EXEMPT_PATHS", ""),
-		BytesLimitPerMinute:     env.size("SWWAF_BYTES_LIMIT_PER_MINUTE", "10G"),
+		BytesLimitPerMinute:     env.size("SWWAF_BYTES_LIMIT_PER_MINUTE", "4G"),
 		BytesLimitPerHour:       env.size("SWWAF_BYTES_LIMIT_PER_HOUR", "20G"),
-		BytesLimitPerDay:        env.size("SWWAF_BYTES_LIMIT_PER_DAY", "50G"),
+		BytesLimitPerDay:        env.size("SWWAF_BYTES_LIMIT_PER_DAY", "200G"),
 		BytesCount:              env.bytesCount("SWWAF_BYTES_COUNT", "both"),
 		LookupSource:            env.lookupSource("SWWAF_LOOKUP_SOURCE", "geojs"),
 		LookupDBPath:            env.value("SWWAF_LOOKUP_DB_PATH", ""),

internal/config/config_test.go

@@ -261,10 +261,10 @@ func TestDefaults(t *testing.T) {
 		UpstreamRequestTimeout:      time.Minute,
 		UpstreamResponseTimeout:     30 * time.Minute,
 		RequestMaxBytes:             100 << 20,
-		ResponseMaxBytes:            5 << 30,
+		ResponseMaxBytes:            1 << 30,
-		RateLimitPerMinute:          1000,
+		RateLimitPerMinute:          6000,
-		RateLimitPerHour:            10000,
+		RateLimitPerHour:            100000,
-		RateLimitPerDay:             50000,
+		RateLimitPerDay:             1000000,
 		BanResponse:                 403,
 		LimitBanDuration:            time.Hour,
 		LimitBanRepeatWindow:        24 * time.Hour,
@@ -284,8 +284,8 @@ func TestDefaults(t *testing.T) {
 		LookupSource: defaultLookupSource, LookupTimeout: time.Second,
 	})
 	wantByteLimitSettings(t, cfg, config.Config{
-		BytesLimitPerMinute: 10 << 30, BytesLimitPerHour: 20 << 30,
+		BytesLimitPerMinute: 4 << 30, BytesLimitPerHour: 20 << 30,
-		BytesLimitPerDay: 50 << 30, BytesCount: "both",
+		BytesLimitPerDay: 200 << 30, BytesCount: "both",
 	})
 
 	if cfg.UpstreamURL.String() != "http://127.0.0.1:8081" {
@@ -2371,17 +2371,17 @@ func TestLogsEachSettingWithItsValue(t *testing.T) {
 		upstreamRequestTimeout:  "60s",
 		upstreamResponseTimeout: "30m",
 		requestMaxBytes:         "100M",
-		responseMaxBytes:        "5G",
+		responseMaxBytes:        "1G",
 		allowNets:               "",
 		rateLimitExemptNets:     "",
 		denyNets:                "",
-		rateLimitPerMinute:      "1000",
+		rateLimitPerMinute:      "6000",
-		rateLimitPerHour:        "10000",
+		rateLimitPerHour:        "100000",
-		rateLimitPerDay:         "50000",
+		rateLimitPerDay:         "1000000",
 		rateLimitExemptPaths:    "",
-		bytesLimitPerMinute:     "10G",
+		bytesLimitPerMinute:     "4G",
 		bytesLimitPerHour:       "20G",
-		bytesLimitPerDay:        "50G",
+		bytesLimitPerDay:        "200G",
 		bytesCount:              "both",
 		lookupSource:            defaultLookupSource,
 		lookupDBPath:            "",

internal/smallwebwaf/healthcheck_test.go

@@ -60,8 +60,13 @@ func TestHealthCheck(t *testing.T) {
 		}, 0, "")
 	}
 
-	app.Close()
+	// Another test can take a closed server's port at once, so the app's
-	wantHealthCheck(t, env, 1, "unhealthy: connect to the app: ")
+	// address here is one that nothing can listen on: TCP cannot connect
+	// to a multicast address such as 224.0.0.1.
+	wantHealthCheck(t, map[string]string{
+		listenAddr:  ":" + port,
+		upstreamURL: "http://224.0.0.1",
+	}, 1, "unhealthy: connect to the app: ")
 
 	stop()
 
@@ -71,7 +76,10 @@ func TestHealthCheck(t *testing.T) {
 		t.Fatal("still running after being told to stop")
 	}
 
-	wantHealthCheck(t, env, 1, "unhealthy: ask smallwebwaf: ")
+	// Listening on port 0 takes any free port, so nothing listens on port 0
+	// itself.
+	wantHealthCheck(t, map[string]string{listenAddr: ":0"}, 1,
+		"unhealthy: ask smallwebwaf: ")
 	wantHealthCheck(t, map[string]string{listenAddr: "8080"}, 1,
 		"unhealthy: invalid setting: SWWAF_LISTEN_ADDR: ")
 }

internal/smallwebwaf/smallwebwaf_test.go

@@ -1240,13 +1240,13 @@ func wantStartingLine(t *testing.T, line map[string]any, appURL, dir string) {
 		"SWWAF_UPSTREAM_REQUEST_TIMEOUT":        "60s",
 		"SWWAF_UPSTREAM_RESPONSE_TIMEOUT":       "30m",
 		"SWWAF_REQUEST_MAX_BYTES":               "100M",
-		"SWWAF_RESPONSE_MAX_BYTES":              "5G",
+		"SWWAF_RESPONSE_MAX_BYTES":              "1G",
 		"SWWAF_ALLOW_NETS":                      "",
 		rateLimitExemptNets:                     "",
 		"SWWAF_DENY_NETS":                       "",
-		"SWWAF_RATE_LIMIT_PER_MINUTE":           "1000",
+		"SWWAF_RATE_LIMIT_PER_MINUTE":           "6000",
-		"SWWAF_RATE_LIMIT_PER_HOUR":             "10000",
+		"SWWAF_RATE_LIMIT_PER_HOUR":             "100000",
-		rateLimitPerDay:                         "50000",
+		rateLimitPerDay:                         "1000000",
 		"SWWAF_RATE_LIMIT_EXEMPT_PATHS":         "",
 		"SWWAF_DENIED_COUNTRIES":                "",
 		"SWWAF_EXCLUSIVELY_ALLOWED_COUNTRIES":   "",