Compare commits

..
Author SHA1 Message Date
sneak 37419716ea rproxy: circuit breaker for asks to waf (closes #392)
check / check (push) Failing after 6m19s
Five failed asks to waf within five seconds open the breaker. An ask
fails when it gets no answer in time, slow answers included, or an
answer rproxy cannot pass on. Every usable answer clears the failures
and closes the breaker. While open, a request takes
SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION without asking waf, except
one ask a second. SPEC.md describes it.

The sww test that stops and restarts waf now waits for the breaker to
close before it expects the ban again.

Model: opus-5-5
2026-11-15 15:30:29 +00:00
22 changed files with 142 additions and 639 deletions

No files matched your search

+7 -6
View File
@@ -304,7 +304,7 @@ Every setting the code reads, with its default:
| `SWW_RPROXY_MAX_REQUEST_TIME_MS` | `60000` | Two time limits, each this long, in milliseconds or `off`: one for the visitor to send its request line and headers, then one for the whole request to reach the app. |
| `SWW_RPROXY_MAX_RESPONSE_TIME_MS` | `1800000` | How long the answer may take, from the end of the request to its last byte reaching the visitor, in milliseconds or `off`. |
| `SWW_WAF_LISTEN_ADDR` | `:8080` | Where `waf` listens; leave the host part empty. |
| `SWW_WAF_INSTANCE_NAME` | the container's host name | The name in every line `waf` logs, and in every alert and metric, such as `host1/waf`. |
| `SWW_WAF_INSTANCE_NAME` | the container's host name | The name in every line `waf` logs, and in every alert and metric, such as `fsn1/waf`. |
| `SWW_WAF_MODE` | `enforce` | `observe` refuses nothing and makes no ban; each log line says what `enforce` would have done. |
| `SWW_WAF_IPV6_GROUP_PREFIX` | `64` | The prefix length of the IPv6 netblock that counts as one client, from 32 to 128. |
| `SWW_WAF_MAX_TRACKED_CLIENTS` | `20000` | The most clients kept, in memory and in `clients.json`; the least recently seen is dropped first. |
@@ -348,7 +348,7 @@ Every setting the code reads, with its default:
| `SWW_WAF_CORE_RULE_SET_SCORE_THRESHOLD` | `5` | The Core Rule Set score at which a request is a match, a whole number or `off`; one critical rule scores 5. |
| `SWW_WAF_CORE_RULE_SET_DISABLED_RULES` | `920340,920420,920440,920640,930130,930140` | Core Rule Set rule ids switched off; a list you give replaces the default, so repeat these six to keep them off. |
| `SWW_WAF_CORE_RULE_SET_EXEMPT_PATHS` | empty | Path prefixes the Core Rule Set does not inspect. |
| `SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE` | `off` | How much of a request body the Core Rule Set reads, a size up to `8K`; `off` reads none. |
| `SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE` | `off` | How much of a request body the Core Rule Set reads, a size up to `64K`; `off` reads none. |
| `SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE` | unset | A file of Core Rule Set exclusions, as Coraza directives, that switch rules off for some fields or paths only. |
| `SWW_WAF_APPS` | unset | The apps each hostname serves, such as `git.example.com:gitea;blog.example.com:wordpress`; only those apps' fixes apply there. "Attack detection" lists the apps. Listing `forgejo` brings gitea's fixes too. Unset, every app's fixes apply to every hostname. |
| `SWW_WAF_BLOCKLIST_URLS` | empty | Blocklists to fetch, text files of addresses and netblocks one to a line, such as `https://www.spamhaus.org/drop/drop.txt`. |
@@ -530,7 +530,7 @@ services:
image: smallwebwaf
environment:
SWW_COMMAND: waf
SWW_WAF_INSTANCE_NAME: host1/waf
SWW_WAF_INSTANCE_NAME: fsn1/waf
# Refuse nothing yet; log what enforce mode would have done.
SWW_WAF_MODE: observe
# Look addresses up in a local IPinfo Lite database, never GeoJS.
@@ -818,9 +818,10 @@ on the host.
- `script/docker`: builds the image, whose build runs the tests and the linter
first. `make docker`.
- `script/publish`: runs `script/docker`, whose build happens on the Docker host
named by `DOCKER_HOST`, then pushes the image to `PUBLISH_IMAGE`, such as
`registry.example.com/smallwebwaf`. Both variables are required. It refuses a
working tree with uncommitted changes. `make publish`. It pushes four tags:
named by `DOCKER_HOST` (`ssh://root@fsn1app1` unless set). It then pushes the
image to `PUBLISH_IMAGE` (`git.eeqj.de/sneak/smallwebwaf` unless set). It
refuses a working tree with uncommitted changes. `make publish`. It pushes
four tags:
- the UTC date as `YYYY-MM-DD`;
- the short commit hash;
- the branch name;
+14 -27
View File
@@ -704,12 +704,11 @@ files, the limits and the bans still apply to the client that sends it.
rules is loaded yet.
- `SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE` switches body inspection on, up
to that size. It takes at most `8K`, so that `waf` answers in time (see
"Answering in time"). Form data and multipart bodies are read up to the size.
JSON and XML bodies are read only when no larger than the size, since those
cannot be read in part. A JSON body over 1 KiB is not read either, whatever
the size (see "Answering in time"). Any other body is not read: the Core Rule
Set would read it as form data, where binary content such as a git push trips
to that size. It takes at most `64K`, since `waf` gets no more of a body than
that (see "The answer"). Form data and multipart bodies are read up to the
size. JSON and XML bodies are read only when no larger than the size, since
those cannot be read in part. Any other body is not read: the Core Rule Set
would read it as form data, where binary content such as a git push trips
rules written for text. A body the Core Rule Set cannot parse adds 5 to the
score, and so does a multipart body cut by the limit in the middle of a part's
header. Body inspection suits apps whose forms carry no code.
@@ -2398,7 +2397,9 @@ In `observe` mode a request that `enforce` mode would refuse is answered
answered `404`.
The Core Rule Set inspects the body a question carries only while
`SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE` is set, and at most 8 KiB of it.
`SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE` is set. It inspects at most 64 KiB
less one byte. So it does not inspect a JSON or XML body of 64 KiB or more,
which may have been cut short.
### Answering in time
@@ -2473,26 +2474,12 @@ client in `SWW_WAF_ALLOW_NETS` skips them, as it skips the Core Rule Set. In
`observe` mode such a request is answered `allow` with `would_action`, and no
other check runs on it.
The Core Rule Set is the one check a visitor can keep busy for long. It runs
each of its rules on each part of a request, so thousands of small cookies would
keep it busy for over a second. These fixed limits bound what it reads:
- the header limits above;
- `rproxy`'s limit of 32 KiB on the request line and headers together (see
"`rproxy`'s limits");
- 8 KiB of a body, the most `SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE` takes,
or 1 KiB of a JSON body.
Coraza names each value in a JSON body by the whole path to it, such as
`json.users.0.name`. So the names and values the Core Rule Set reads in a JSON
body can add up to more than the body. From 1 KiB of JSON, Coraza makes at most
8 KiB of them, no more than the largest body of another kind.
A request can reach all of these at once. At paranoia level 4, with no rule
switched off, the Core Rule Set takes under a second on one core of a current
server to inspect it. So `waf` answers it within the default 2 seconds, even
after the default 800 milliseconds of waiting for GeoJS. Enough such requests at
once can still overload `waf` past `SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS`.
The Core Rule Set runs each of its rules on each cookie, so thousands of small
cookies would keep it busy for over a second. One 30 KB cookie or query string
would keep it busy for a third of a second or more. A request with several long
`Cookie` lines, each within the limits, can keep it as busy. Enough such
requests at once can still overload `waf` past
`SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS`.
### The report
+2 -2
View File
@@ -34,7 +34,7 @@ on one line:
```json
{
"instance": "host1/waf",
"instance": "fsn1/waf",
"time": "2026-10-06T12:00:50.123461Z",
"event": "ban",
"host": "app.example",
@@ -109,7 +109,7 @@ on one line:
## Slack and ntfy
Slack and ntfy get a message with a title and a text. The title is the instance
and the event, such as `host1/waf: ban`. The text is the `reason`, then one line
and the event, such as `fsn1/waf: ban`. The text is the `reason`, then one line
for each of these that the alert has:
- the host, the client, the netblock and the country;
+1 -1
View File
@@ -26,7 +26,7 @@ These questions write no line:
A `report` line:
```
{"type":"request","waf_line":"report","time":"2026-10-03T12:00:00.123Z","instance":"host1/waf","client_ip":"203.0.113.9","method":"GET","scheme":"https","host":"app.example","path":"/","query":"","protocol":"HTTP/1.1","status":200,"request_bytes":0,"response_bytes":5120,"referer":"","user_agent":"curl/8.9.1","request_id":"7Q2NHZ4KJ3VXW5YB6R3MEFTD2A","peer_ip":"172.18.0.2","forwarded_for":"203.0.113.9","client_group":"203.0.113.9/32","asn":"AS64496","as_name":"Example Net","country":"DE","request_headers":{"accept":"*/*"},"action":"forward","counts":{"minute":1,"hour":12,"day":40,"minute_bytes":5120,"hour_bytes":61440,"day_bytes":204800},"core_rule_set_score":0,"duration_total_ms":3.217,"duration_checks_ms":0.041,"duration_core_rule_set_ms":0.029,"duration_upstream_total_ms":3.104}
{"type":"request","waf_line":"report","time":"2026-10-03T12:00:00.123Z","instance":"fsn1/waf","client_ip":"203.0.113.9","method":"GET","scheme":"https","host":"app.example","path":"/","query":"","protocol":"HTTP/1.1","status":200,"request_bytes":0,"response_bytes":5120,"referer":"","user_agent":"curl/8.9.1","request_id":"7Q2NHZ4KJ3VXW5YB6R3MEFTD2A","peer_ip":"172.18.0.2","forwarded_for":"203.0.113.9","client_group":"203.0.113.9/32","asn":"AS64496","as_name":"Example Net","country":"DE","request_headers":{"accept":"*/*"},"action":"forward","counts":{"minute":1,"hour":12,"day":40,"minute_bytes":5120,"hour_bytes":61440,"day_bytes":204800},"core_rule_set_score":0,"duration_total_ms":3.217,"duration_checks_ms":0.041,"duration_core_rule_set_ms":0.029,"duration_upstream_total_ms":3.104}
```
### Every line
+5 -4
View File
@@ -34,7 +34,7 @@ chooses between the two (see "The image's command" below).
such as `:9000`. Leave the host out (see "Ports" in [`SPEC.md`](../SPEC.md)).
- `SWW_WAF_INSTANCE_NAME` (default: the container's host name): the `instance`
name in each line `waf` logs, and in each alert and metric, such as
`host1/waf`. Valid UTF-8. No control character while `SWW_WAF_ALERT_NTFY_URL`
`fsn1/waf`. Valid UTF-8. No control character while `SWW_WAF_ALERT_NTFY_URL`
is set. 1 to 48 printable ASCII characters without a space while
`SWW_WAF_LOG_REMOTE_URL` is set and `SWW_WAF_LOG_REMOTE_APP_NAME` is not.
- `SWW_WAF_MODE` (default `enforce`): `enforce` or `observe`.
@@ -251,9 +251,10 @@ tag that no request can get stops the start. A request can get only these:
- `SWW_WAF_CORE_RULE_SET_EXEMPT_PATHS` (default empty): path prefixes the Core
Rule Set does not inspect.
- `SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE` (default `off`): `off`, or how
much of a request body the Core Rule Set reads, a size of at most `8K`. A
larger size would let one request keep it busy past `rproxy`'s timeout (see
"Answering in time" in [`SPEC.md`](../SPEC.md)).
much of a request body the Core Rule Set reads, a size of at most `64K`. A
question carries no more of a body than 64 KiB, and the Core Rule Set reads at
most 64 KiB less one byte of it, whatever the value (see "The answer" in
[`SPEC.md`](../SPEC.md)).
- `SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE` (default unset): a file of Core Rule
Set exclusions, written as Coraza directives. It is loaded before the Core
Rule Set's rules, so it holds only `SecAction` and `SecRule` lines that
+1 -1
View File
@@ -12,7 +12,6 @@ require (
github.com/oschwald/maxminddb-golang/v2 v2.7.0
github.com/prometheus/client_golang v1.24.1
github.com/spf13/viper v1.21.0
golang.org/x/sys v0.48.0
)
require (
@@ -48,6 +47,7 @@ require (
go4.org/netipx v0.0.0-20231129151722-fdeea329fbba // indirect
golang.org/x/net v0.60.0 // indirect
golang.org/x/sync v0.23.0 // indirect
golang.org/x/sys v0.48.0 // indirect
golang.org/x/text v0.42.0 // indirect
google.golang.org/protobuf v1.36.11 // indirect
rsc.io/binaryregexp v0.2.0 // indirect
+10 -10
View File
@@ -39,7 +39,7 @@ const (
ntfyURL = "https://ntfy.example/sww-alerts"
ntfyToken = "tk_0123456789abcdefghijklmnopq"
// instance is the instance name every alert gives.
instance = "host1/blog"
instance = "fsn1app1/blog"
// started is when each test starts, as an alert gives it, and
// anHourOn an hour later.
started = "2000-01-01T00:00:00Z"
@@ -1160,8 +1160,8 @@ func TestEachDestinationIsSentOnlyTheAlertsWaitingForIt(t *testing.T) {
synctest.Wait()
wantBodies(t, standIns[alerts.DestinationSlack],
`{"text":"*host1/blog: file_error*\nsecond"}`,
`{"text":"*host1/blog: file_error*\nthird"}`)
`{"text":"*fsn1app1/blog: file_error*\nsecond"}`,
`{"text":"*fsn1app1/blog: file_error*\nthird"}`)
wantBodies(t, standIns[alerts.DestinationNtfy], "fourth")
// alerts.json then lists Slack and ntfy alone, with no alert waiting.
@@ -1477,7 +1477,7 @@ func anAlertForEachEvent() []eventMessage {
Reason: "requests per hour over the limit of 10000",
Detail: map[string]any{"mode": "observe"},
},
"host1/blog: ban", "default no_entry",
"fsn1app1/blog: ban", "default no_entry",
"requests per hour over the limit of 10000\nclient: 203.0.113.9\n" +
"netblock: 203.0.113.0/24\ncountry: DE\nmode: observe",
},
@@ -1489,7 +1489,7 @@ func anAlertForEachEvent() []eventMessage {
), Country: "FR",
Reason: "matched the rule env-file",
},
"host1/blog: permanent_ban", "high no_entry",
"fsn1app1/blog: permanent_ban", "high no_entry",
"matched the rule env-file\nclient: 198.51.100.7\n" +
"netblock: 198.51.100.7/32\ncountry: FR",
},
@@ -1500,7 +1500,7 @@ func anAlertForEachEvent() []eventMessage {
Reason: "refused by the Core Rule Set",
Host: "app.example",
},
"host1/blog: core_rule_set_match", "default shield",
"fsn1app1/blog: core_rule_set_match", "default shield",
"refused by the Core Rule Set\nhost: app.example\nclient: 192.0.2.1\n" +
"netblock: 192.0.2.1/32",
},
@@ -1509,7 +1509,7 @@ func anAlertForEachEvent() []eventMessage {
Event: alerts.EventAnomaly, Netblock: netip.MustParsePrefix("192.0.2.0/24"),
Reason: "requests per minute over the threshold of 5000",
},
"host1/blog: anomaly", "high chart_with_upwards_trend",
"fsn1app1/blog: anomaly", "high chart_with_upwards_trend",
"requests per minute over the threshold of 5000\nnetblock: 192.0.2.0/24",
},
{
@@ -1518,7 +1518,7 @@ func anAlertForEachEvent() []eventMessage {
Netblock: netip.MustParsePrefix("192.0.2.2/32"),
Reason: "listed by a DNS blocklist",
},
"host1/blog: reputation_hit", "low label",
"fsn1app1/blog: reputation_hit", "low label",
"listed by a DNS blocklist\nclient: 192.0.2.2\nnetblock: 192.0.2.2/32",
},
{
@@ -1526,7 +1526,7 @@ func anAlertForEachEvent() []eventMessage {
Event: alerts.EventSourceFailure, Reason: "asking GeoJS failed",
Detail: map[string]any{"source": "geojs"},
},
"host1/blog: source_failure", "high warning",
"fsn1app1/blog: source_failure", "high warning",
"asking GeoJS failed\nsource: geojs",
},
{
@@ -1537,7 +1537,7 @@ func anAlertForEachEvent() []eventMessage {
"file": "/etc/sww/rules.d/50-app.rules", "error": "line 2: no action",
},
},
"host1/blog: file_error", "high warning",
"fsn1app1/blog: file_error", "high warning",
"a rule file has an error, and the rules stay as they were\n" +
"file: /etc/sww/rules.d/50-app.rules\nerror: line 2: no action",
},
+6 -6
View File
@@ -365,8 +365,8 @@ var (
"it names the file to look clients up in",
)
errDBPathUnused = errors.New("only file reads it")
errOver8K = errors.New(
"is more than 8K, the most the Core Rule Set can read in time")
errOver64K = errors.New(
"is more than 64K, the most waf gets of a body")
errNotDurationAboveZero = errors.New(
"is not a duration above zero, such as 1h or 7d")
errNotNumberAboveZero = errors.New(
@@ -1601,16 +1601,16 @@ func durationOrDays(value string) (time.Duration, error) {
}
// parseCoreRuleSetBodyInspectionSize reads the most of a request body the Core Rule Set
// reads: a size as parseSize reads it, or off, but at most 8K, so that one
// request cannot keep the Core Rule Set busy past rproxy's timeout.
// reads: a size as parseSize reads it, or off, but at most 64K, since waf
// gets no more of a body than that.
func parseCoreRuleSetBodyInspectionSize(value string) (int64, error) {
limit, err := parseSize(value)
if err != nil {
return 0, err
}
if limit > 8*kibibyte {
return 0, fmt.Errorf("%q %w", value, errOver8K)
if limit > 64*kibibyte {
return 0, fmt.Errorf("%q %w", value, errOver64K)
}
return limit, nil
+17 -19
View File
@@ -218,7 +218,7 @@ const (
// instance is an SWW_WAF_INSTANCE_NAME that is a valid app name too, and
// remoteURL an SWW_WAF_LOG_REMOTE_URL, for the tests that send the lines.
const (
instance = "host1/blog"
instance = "fsn1app1/blog"
remoteURL = "syslog+udp://192.0.2.1:514"
)
@@ -616,7 +616,7 @@ func TestCoreRuleSetSettings(t *testing.T) {
coreRuleSetScoreThreshold: "10",
coreRuleSetDisabledRules: "942100, 920350",
coreRuleSetExemptPaths: "/api/, /static/",
coreRuleSetBodyInspectionSize: "4K",
coreRuleSetBodyInspectionSize: "32K",
exclusionsFile: "/etc/sww/crs-exclusions.conf",
},
config.WAF{
@@ -625,7 +625,7 @@ func TestCoreRuleSetSettings(t *testing.T) {
CoreRuleSetScoreThreshold: 10,
CoreRuleSetDisabledRules: []int{942100, 920350},
CoreRuleSetExemptPaths: []string{"/api/", "/static/"},
CoreRuleSetBodyInspectionSize: 4 << 10,
CoreRuleSetBodyInspectionSize: 32 << 10,
CoreRuleSetExclusionsFile: "/etc/sww/crs-exclusions.conf",
},
},
@@ -762,15 +762,15 @@ func TestInvalidAppsStopsTheStart(t *testing.T) {
}
}
func TestCoreRuleSetBodyInspectionSizeOf8K(t *testing.T) {
func TestCoreRuleSetBodyInspectionSizeOf64K(t *testing.T) {
t.Parallel()
cfg := wafFromEnvironment(
t,
environment{coreRuleSetBodyInspectionSize: "8K"},
environment{coreRuleSetBodyInspectionSize: "64K"},
)
if cfg.CoreRuleSetBodyInspectionSize != 8<<10 {
t.Errorf("8K read as %d", cfg.CoreRuleSetBodyInspectionSize)
if cfg.CoreRuleSetBodyInspectionSize != 64<<10 {
t.Errorf("64K read as %d", cfg.CoreRuleSetBodyInspectionSize)
}
}
@@ -819,13 +819,11 @@ func TestInvalidCoreRuleSetSettingStopsTheStart(t *testing.T) {
coreRuleSetBodyInspectionSize, "128KB",
`"128KB" is not a size such as 512K, 100M or 5G, or off`,
},
{coreRuleSetBodyInspectionSize, "65K", `"65K" is more than 64K, the most waf ` +
`gets of a body`},
{
coreRuleSetBodyInspectionSize, "9K",
`"9K" is more than 8K, the most the Core Rule Set can read in time`,
},
{
coreRuleSetBodyInspectionSize, "8193",
`"8193" is more than 8K, the most the Core Rule Set can read in time`,
coreRuleSetBodyInspectionSize, "65537",
`"65537" is more than 64K, the most waf gets of a body`,
},
} {
t.Run(tc.name+"="+tc.value, func(t *testing.T) {
@@ -847,11 +845,11 @@ func TestInstanceNameAndLoggedHeadersAsSet(t *testing.T) {
t.Parallel()
cfg := wafFromEnvironment(t, environment{
instanceName: "host1/blog",
instanceName: "fsn1app1/blog",
logRequestHeaders: " Accept , X-Custom",
})
if cfg.InstanceName != "host1/blog" ||
if cfg.InstanceName != "fsn1app1/blog" ||
!slices.Equal(
cfg.LogRequestHeaders,
[]string{"accept", "x-custom"},
@@ -1024,14 +1022,14 @@ func TestInstanceNameNotAnAppNameStopsTheStartOnlyWhileSending(
) {
t.Parallel()
const spaced = "host1 blog"
const spaced = "fsn1 app1"
sending := environment{logRemoteURL: remoteURL, instanceName: spaced}
_, err := config.WAFFromEnvironment(sending.viper())
want := logRemoteAppName + `: is unset, and ` + instanceName +
` "host1 blog", its default, is not 1 to 48 printable ASCII characters ` +
` "fsn1 app1", its default, is not 1 to 48 printable ASCII characters ` +
`without a space, such as blog`
if err == nil || err.Error() != want {
t.Errorf("error %v, want %s", err, want)
@@ -1333,13 +1331,13 @@ func TestInstanceNameWithAControlCharacterStopsTheStartOnlyWithNtfySet(
) {
t.Parallel()
const name = "host1\r"
const name = "fsn1app1\r"
_, err := config.WAFFromEnvironment(environment{
instanceName: name, alertNtfyURL: "https://ntfy.example/sww-alerts",
}.viper())
want := instanceName + `: "host1\r" holds a control character, such as the ` +
want := instanceName + `: "fsn1app1\r" holds a control character, such as the ` +
`carriage return of a Windows line end, and is sent to ntfy in a header ` +
`while ` + alertNtfyURL + ` is set`
if err == nil || err.Error() != want {
+3 -16
View File
@@ -481,21 +481,12 @@ func (c *CoreRuleSet) Inspect(
return Result{RuleIDs: ids, Score: score(tx)}, read, err
}
// mostJSONRead is the largest JSON body the Core Rule Set reads, even while
// SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE is larger. Coraza names each
// value in a JSON body by the whole path to it, so what it gives the Core
// Rule Set to read can outgrow the body: up to 8 times its size, and up to
// 4 KiB for a small body. 1 KiB of JSON thus gives at most 8 KiB, no more
// than the largest body of another kind.
const mostJSONRead = 1 << 10
// readBody reads body, the body of the request in tx, which has run on
// the request's headers, while SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE is
// set and the body is of a kind the Core Rule Set reads: form data and
// multipart, of which it reads the first c.bodyInspectionSize bytes, and
// JSON and XML, which it reads only when they are no longer than that,
// since they cannot be read in part. The Core Rule Set reads no JSON body
// longer than mostJSONRead either.
// since they cannot be read in part.
// readBody reads one byte past c.bodyInspectionSize, to tell which they
// are, gives the Core Rule Set what it reads, and returns what it read and
// the error that ended the reading early, if one did.
@@ -508,8 +499,6 @@ func (c *CoreRuleSet) readBody(
}
inPart := false
// largest is the largest JSON or XML body the Core Rule Set reads.
largest := c.bodyInspectionSize
// How the body is read is a variable of the transaction, which only
// Coraza's interface for plugins reads.
state := tx.(plugintypes.TransactionState) //nolint:forcetypeassert // every one is
@@ -517,16 +506,14 @@ func (c *CoreRuleSet) readBody(
switch state.Variables().RequestBodyProcessor().Get() {
case "URLENCODED", "MULTIPART":
inPart = true
case "JSON":
largest = min(largest, mostJSONRead)
case "XML":
case "JSON", "XML":
default:
return nil, nil
}
read, err := io.ReadAll(io.LimitReader(body, c.bodyInspectionSize+1))
if inPart || (err == nil && int64(len(read)) <= largest) {
if inPart || (err == nil && int64(len(read)) <= c.bodyInspectionSize) {
// Coraza holds what it reads of the body in memory, up to the
// limit, so this cannot fail.
_, _, _ = tx.WriteRequestBody(read)
+29 -40
View File
@@ -390,15 +390,22 @@ func TestMoreParametersThanCorazaKeepsIsAMatch(t *testing.T) {
matched(900300),
)
// So it is with the fields of a form data body. A JSON body the Core
// Rule Set reads, of at most mostJSONRead bytes, cannot hold that many.
// So it is with the fields of a form data or JSON body.
crs = readingBodies(t)
body := strings.Repeat("a=1&", 999) + attack
wantBody(t, crs, post(formData), body, matched(942100), body)
for _, tc := range []struct{ header, body string }{
{formData, strings.Repeat("a=1&", 999) + attack},
{jsonBody, `{"a":[` + strings.Repeat("1,", 998) + `1],"id":"` + injection + `"}`},
} {
wantBody(t, crs, post(tc.header), tc.body, matched(942100), tc.body)
}
body = strings.Repeat("a=1&", 1000) + attack
wantBody(t, crs, post(formData), body, matched(900300), body)
for _, tc := range []struct{ header, body string }{
{formData, strings.Repeat("a=1&", 1000) + attack},
{jsonBody, `{"a":[` + strings.Repeat("1,", 999) + `1],"id":"` + injection + `"}`},
} {
wantBody(t, crs, post(tc.header), tc.body, matched(900300), tc.body)
}
}
func TestRedirectURIMayNameALocalAddress(t *testing.T) {
@@ -1505,15 +1512,13 @@ const (
wpTags = "/wp-json/wp/v2/tags"
)
// readingBodiesUpTo8K returns the Core Rule Set as sww runs it by default,
// readingBodiesUpTo64K returns the Core Rule Set as sww runs it by default,
// but reading bodies up to the largest SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE.
func readingBodiesUpTo8K(t *testing.T) *coreruleset.CoreRuleSet {
func readingBodiesUpTo64K(t *testing.T) *coreruleset.CoreRuleSet {
t.Helper()
return shared(t, coreruleset.Params{
ParanoiaLevel: 1,
DisabledRules: defaultDisabledRules,
BodyInspectionSize: mostBodyRead,
ParanoiaLevel: 1, DisabledRules: defaultDisabledRules, BodyInspectionSize: 64<<10 - 1,
})
}
@@ -1577,7 +1582,7 @@ func TestWordPressAttacksAreRefused(t *testing.T) {
const threshold = 5 // SWW_WAF_CORE_RULE_SET_SCORE_THRESHOLD's default
defaults, bodies := atDefaults(t), readingBodiesUpTo8K(t)
defaults, bodies := atDefaults(t), readingBodiesUpTo64K(t)
for _, attack := range []string{
sqlInjection,
@@ -1688,7 +1693,7 @@ func wordpressRESTAddresses(route string) []string {
func TestWordPressExclusionsFollowEveryRESTAddress(t *testing.T) {
t.Parallel()
crs := readingBodiesUpTo8K(t)
crs := readingBodiesUpTo64K(t)
content := `{"content":"` + wordpressBlock + `"}`
for _, route := range []string{
@@ -1914,7 +1919,7 @@ func TestWordPressCommandAfterASeparatorIsRefusedOnSearchesAndNames(
wantResult(t, crs, get(target+command), matched(932235))
}
bodies := readingBodiesUpTo8K(t)
bodies := readingBodiesUpTo64K(t)
for _, p := range wordpressBodyFields(command) {
r := request{http.MethodPost, p.target, []string{p.contentType}}
@@ -2138,7 +2143,7 @@ func TestWordPressBodyFieldsAreCheckedInTheQuery(t *testing.T) {
func TestWordPressBodyNamesAndAddressesAreExcludedOnlyThere(t *testing.T) {
t.Parallel()
crs := readingBodiesUpTo8K(t)
crs := readingBodiesUpTo64K(t)
for _, v := range wordpressWords() {
for _, field := range []string{"title", "excerpt", "name"} {
@@ -2257,7 +2262,7 @@ func TestWordPressExclusionsAreNarrow(t *testing.T) {
length = "Content-Length: 2"
)
crs := readingBodiesUpTo8K(t)
crs := readingBodiesUpTo64K(t)
saving := request{
http.MethodPost,
wpPost,
@@ -2468,35 +2473,19 @@ func TestFormDataAndMultipartAreReadUpToTheLimit(t *testing.T) {
func TestJSONAndXMLAreReadOnlyWhenNoLargerThanTheLimit(t *testing.T) {
t.Parallel()
// The limit is the body inspection size, but at most mostJSONRead for
// JSON. smallSize is a body inspection size under mostJSONRead.
const smallSize = 512
crs := readingBodies(t)
bodies, smallBodies := readingBodies(t), shared(t, coreruleset.Params{
ParanoiaLevel: 1, DisabledRules: defaultDisabledRules,
BodyInspectionSize: smallSize,
})
jsonHead, jsonTail := `{"q":"`+injection+`","pad":"`, `"}`
for _, tc := range []struct {
crs *coreruleset.CoreRuleSet
header, head, tail string
limit int
for _, tc := range []struct{ header, head, tail string }{
{jsonBody, `{"q":"` + injection + `","pad":"`, `"}`},
{xmlBody, "<r><q>" + injection + "</q><pad>", "</pad></r>"},
} {
{bodies, jsonBody, jsonHead, jsonTail, mostJSONRead},
{smallBodies, jsonBody, jsonHead, jsonTail, smallSize},
{
bodies, xmlBody, "<r><q>" + injection + "</q><pad>", "</pad></r>",
bodyInspectionSize,
},
} {
fits := padded(tc.head, tc.tail, tc.limit)
wantBody(t, tc.crs, post(tc.header), fits, matched(942100), fits)
fits := padded(tc.head, tc.tail, bodyInspectionSize)
wantBody(t, crs, post(tc.header), fits, matched(942100), fits)
larger := padded(tc.head, tc.tail, tc.limit+1)
larger := padded(tc.head, tc.tail, bodyInspectionSize+1)
wantBody(
t,
tc.crs,
crs,
post(tc.header),
larger,
coreruleset.Result{},
-436
View File
@@ -1,436 +0,0 @@
package coreruleset_test
import (
"maps"
"net/http"
"net/http/httptest"
"net/netip"
"regexp"
"runtime"
"slices"
"strconv"
"strings"
"testing"
"time"
"golang.org/x/sys/unix"
"sneak.berlin/go/smallwebwaf/internal/coreruleset"
)
// The bounds on what a visitor can send, as SPEC.md gives them.
const (
// lineLimit is the longest request line or header line.
lineLimit = 8 << 10
// headerLimit is the most bytes rproxy reads of a request line and
// headers together.
headerLimit = 32 << 10
// mostCookies and mostHeaderFields are waf's limits on cookies and header
// fields.
mostCookies = 50
mostHeaderFields = 100
// mostBodyRead is the largest SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE.
mostBodyRead = 8 << 10
// mostJSONRead is the largest JSON body the Core Rule Set reads.
mostJSONRead = 1 << 10
)
// The Core Rule Set has 1 second for one request. That is the default of
// rproxy's SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS, 2 seconds, less the default of
// SWW_WAF_ASN_AND_COUNTRY_LOOKUP_TIMEOUT_MS, 800 milliseconds, and less 200
// milliseconds for waf's other checks.
//
// A busy host slows all work, so the test does not compare an inspection with
// 1 second. It compares it with referenceTime, timed on the same thread just
// before and after. inspectionTimeLimitMultiple is how many times
// referenceTime an inspection may take.
//
// On the host that runs our checks, referenceTime took at least 78
// milliseconds, so 13 times it is about 1 second. With that host fully busy,
// no try of the slowest request took more than 9.5 times referenceTime.
const inspectionTimeLimitMultiple = 13
// referencePattern is what referenceTime matches. Like the Core Rule Set's
// rules, it is a regular expression with alternatives and repeats.
var referencePattern = regexp.MustCompile(
`(?i)(union|select|insert|delete)\s+\w+\s+(from|into)\s+\w+[0-9]+;`,
)
// referenceTime returns the processor time the calling thread takes to do a
// fixed amount of work unrelated to the Core Rule Set, so that a change to the
// rules does not change it. referencePattern matches nowhere in the text, so
// each match reads all of it.
func referenceTime(t *testing.T) time.Duration {
t.Helper()
referenceText := text(4 << 10)
began := threadCPUTime(t)
for range 200 {
if referencePattern.MatchString(referenceText) {
t.Fatal("the reference pattern matched")
}
}
return threadCPUTime(t) - began
}
// text returns n bytes of letters, digits and spaces, which the Core Rule Set
// takes longer over than one letter repeated.
func text(n int) string {
const words = "select 0x2f from tbl_1 where name like abc_9 "
return strings.Repeat(words, n/len(words)+1)[:n]
}
// visitorRequest is a request a visitor can send, at the most of one or more
// of the bounds above.
type visitorRequest struct {
name string
target string
// header holds the headers besides Host.
header http.Header
// contentType is the body's type, "" for no body.
contentType string
body string
}
// longestTarget returns a target whose request line, "POST <target>
// HTTP/1.1", is lineLimit bytes long.
func longestTarget() string {
const around = len("POST /?q= HTTP/1.1")
return "/?q=" + strings.ReplaceAll(text(lineLimit-around), " ", "+")
}
// cookieLine returns a Cookie value whose line, "Cookie: <value>", is
// lineLimit bytes long, made of count cookies.
func cookieLine(count int) string {
const linePrefix = len("Cookie: ")
cookies := make([]string, count)
for i := range cookies {
cookies[i] = "c" + strconv.Itoa(i) + "="
}
// Each cookie is followed by "; ", but for the last.
room := lineLimit - linePrefix - len(strings.Join(cookies, "; "))
for i := range cookies {
share := room / count
if i == 0 {
share += room % count
}
cookies[i] += strings.ReplaceAll(text(share), " ", "_")
}
return strings.Join(cookies, "; ")
}
// headerValue returns a value whose line, "<name>: <value>", is n bytes long.
func headerValue(name string, n int) string {
return text(n - len(name) - len(": "))
}
// formFields returns a form body of mostBodyRead bytes holding count fields.
func formFields(count int) string {
fields := make([]string, count)
for i := range fields {
fields[i] = "f" + strconv.Itoa(i) + "="
}
room := mostBodyRead - len(strings.Join(fields, "&"))
for i := range fields {
share := room / count
if i == 0 {
share += room % count
}
fields[i] += strings.ReplaceAll(text(share), " ", "+")
}
return strings.Join(fields, "&")
}
// multipartBody returns a multipart body of mostBodyRead bytes, with the
// boundary "b", holding fields of about size bytes each.
func multipartBody(size int) string {
var body strings.Builder
const end = "--b--\r\n"
for i := 0; ; i++ {
head := "--b\r\nContent-Disposition: form-data; name=\"f" +
strconv.Itoa(i) + "\"\r\n\r\n"
room := mostBodyRead - body.Len() - len(
end,
) - len(
head,
) - len(
"\r\n",
)
if room <= 0 {
break
}
body.WriteString(head + text(min(size, room)) + "\r\n")
}
body.WriteString(end)
return body.String()
}
// jsonArrayOfMostElements returns a JSON array of at most mostJSONRead bytes
// holding as many elements as fit, each the number 1.
func jsonArrayOfMostElements() string {
return "[1" + strings.Repeat(
",1",
(mostJSONRead-len("[1]"))/len(",1"),
) + "]"
}
// jsonOfMostElementsUnderAKey returns a JSON body of mostJSONRead bytes
// holding as many elements as fit, each the number 1, in an array under a
// key of 6 bytes. Coraza names each element "json.<key>.<index>", so a
// longer key makes longer names. 6 bytes is the longest key that keeps the
// names and values of this body within the 8 KiB Coraza allows.
func jsonOfMostElementsUnderAKey() string {
head := `{"` + text(6) + `":[1`
return head + strings.Repeat(
",1",
(mostJSONRead-len(head+"]}"))/len(",1"),
) + "]}"
}
// The kinds of body the Core Rule Set reads, and the header that names a
// request's cookies.
const (
formType = "application/x-www-form-urlencoded"
jsonType = "application/json"
multipartType = "multipart/form-data; boundary=b"
cookieHeader = "Cookie"
)
// fullLine is the length of each of the request line and the three or four
// header lines that together fill rproxy's limit, with room for the line
// endings and the other headers.
const fullLine = lineLimit - 64
// worstCaseRequests are, for each kind of thing a visitor sends, the requests
// that keep the Core Rule Set busiest, within the bounds above. The last
// holds the most of everything at once: Cookie lines keep it busier than
// other header lines, and the JSON body of the most elements under a key
// keeps it busier than the other bodies.
func worstCaseRequests() []visitorRequest {
fullCookieLine := cookieLine(1)[:fullLine-len("Cookie: ")]
return append(
append(worstCaseHeaders(), worstCaseBodies()...),
visitorRequest{
name: "the longest request line, three Cookie lines and body",
target: longestTarget()[:fullLine-len("POST HTTP/1.1")],
header: http.Header{cookieHeader: {
fullCookieLine, fullCookieLine, fullCookieLine,
}},
contentType: jsonType, body: jsonOfMostElementsUnderAKey(),
},
)
}
// worstCaseHeaders are the requests of worstCaseRequests with no body.
func worstCaseHeaders() []visitorRequest {
headerFields := http.Header{}
for i := range mostHeaderFields - 1 {
name := "X-Field-" + strconv.Itoa(i)
headerFields.Set(
name,
headerValue(name, headerLimit/mostHeaderFields),
)
}
return []visitorRequest{
{name: "the longest request line", target: longestTarget()},
{
name: "the longest request line, as query parameters",
target: "/?" + strings.Repeat(
"a=1&",
(lineLimit-len("POST /? HTTP/1.1"))/len("a=1&"),
),
},
{
name: "the longest Cookie line, as one cookie",
target: "/",
header: http.Header{cookieHeader: {cookieLine(1)}},
},
{
name: "the longest Cookie line, as the most cookies",
target: "/",
header: http.Header{cookieHeader: {cookieLine(mostCookies)}},
},
{name: "the most header fields", target: "/", header: headerFields},
{
name: "the longest header lines",
target: "/",
header: http.Header{
"User-Agent": {headerValue("User-Agent", fullLine)},
"Referer": {headerValue("Referer", fullLine)},
"Accept": {headerValue("Accept", fullLine)},
"X-Long": {headerValue("X-Long", fullLine)},
},
},
}
}
// worstCaseBodies are the requests of worstCaseRequests whose body holds
// the most the Core Rule Set reads.
func worstCaseBodies() []visitorRequest {
const nested = (mostJSONRead - len(`{"a":1}`)) / len(`{"a":}`)
return []visitorRequest{
{
name: "a form body of one field", target: "/",
contentType: formType, body: formFields(1),
},
{
name: "a form body of the most fields Coraza keeps", target: "/",
contentType: formType, body: formFields(1000),
},
{
name: "a JSON body of one string", target: "/",
contentType: jsonType,
body: `{"a":"` + text(
mostJSONRead-len(`{"a":""}`),
) + `"}`,
},
{
name: "a JSON body of the most elements", target: "/",
contentType: jsonType, body: jsonArrayOfMostElements(),
},
{
name: "a JSON body of the most elements under a key", target: "/",
contentType: jsonType, body: jsonOfMostElementsUnderAKey(),
},
{
name: "a JSON body nested deep", target: "/",
contentType: jsonType,
body: strings.Repeat(`{"a":`, nested) + "1" +
strings.Repeat("}", nested),
},
{
name: "an XML body of many elements", target: "/",
contentType: "application/xml",
body: "<a>" + strings.Repeat(
"<b>x</b>",
(mostBodyRead-len("<a></a>"))/len("<b>x</b>"),
) + "</a>",
},
{
name: "a multipart body of one field", target: "/",
contentType: multipartType, body: multipartBody(mostBodyRead),
},
{
name: "a multipart body of many fields", target: "/",
contentType: multipartType, body: multipartBody(1),
},
}
}
// threadCPUTime returns the processor time the calling thread has used.
func threadCPUTime(t *testing.T) time.Duration {
t.Helper()
var now unix.Timespec
err := unix.ClockGettime(unix.CLOCK_THREAD_CPUTIME_ID, &now)
if err != nil {
t.Fatalf("read the thread's processor time: %v", err)
}
return time.Duration(now.Nano())
}
// inspectionTime returns the processor time crs takes to inspect tc, and the
// mean of referenceTime just before and after. It fails t unless crs reads all
// of tc's body and Coraza parses it.
//
// All of it runs on this goroutine, kept on one thread, so the thread's
// processor time measures it. Time other work holds the processor does not
// count.
func inspectionTime(
t *testing.T, crs *coreruleset.CoreRuleSet, tc visitorRequest,
) (time.Duration, time.Duration) {
t.Helper()
req := httptest.NewRequestWithContext(
t.Context(), http.MethodPost, tc.target, nil,
)
maps.Copy(req.Header, tc.header)
if tc.contentType != "" {
req.Header.Set("Content-Type", tc.contentType)
}
runtime.LockOSThread()
defer runtime.UnlockOSThread()
before := referenceTime(t)
began := threadCPUTime(t)
result, read, _ := crs.Inspect(
req, netip.MustParseAddr("192.0.2.1"), strings.NewReader(tc.body),
)
took := threadCPUTime(t) - began
reference := (before + referenceTime(t)) / 2
if string(read) != tc.body {
t.Errorf("read %d bytes of %d", len(read), len(tc.body))
}
// Rule 900440 matches a body Coraza could not parse.
if slices.Contains(result.RuleIDs, 900440) {
t.Errorf("Coraza could not parse the body")
}
return took, reference
}
// TestTheCoreRuleSetInspectsEachWorstCaseRequestInTime runs one at a time, so
// that the tests running in parallel do not slow it. Other work on the host
// can still slow one try more than the reference work around it, so a request
// fails only when three tries in a row take too long.
//
//nolint:paralleltest // one at a time, as above
func TestTheCoreRuleSetInspectsEachWorstCaseRequestInTime(t *testing.T) {
const tries = 3
// The settings that make the Core Rule Set slowest: the highest paranoia
// level, no rule switched off, and the most of a body read.
crs := shared(t, coreruleset.Params{
ParanoiaLevel: 4, BodyInspectionSize: mostBodyRead,
})
for _, tc := range worstCaseRequests() {
t.Run(tc.name, func(t *testing.T) {
var took, reference time.Duration
for range tries {
took, reference = inspectionTime(t, crs, tc)
if took <= inspectionTimeLimitMultiple*reference {
return
}
}
t.Errorf(
"took %s on the last of %d tries, over %d times the %s "+
"of the reference work",
took, tries, inspectionTimeLimitMultiple, reference,
)
})
}
}
+1 -1
View File
@@ -44,7 +44,7 @@ import (
const (
// started is the time a record made as a test starts gives.
started = "2000-01-01T00:00:00.000Z"
appName = "host1/blog"
appName = "fsn1app1/blog"
// local0 is the number of the default facility, and local0Info the
// priority of its records.
local0 = 16
+3 -3
View File
@@ -140,7 +140,7 @@ func TestProcessLinesAreMarkedProcessAndGiveTheInstance(t *testing.T) {
var out bytes.Buffer
requestlog.NewProcessLogger(&out, "host1/blog", slog.LevelInfo).
requestlog.NewProcessLogger(&out, "fsn1app1/blog", slog.LevelInfo).
Info("starting",
"version", "v1")
@@ -152,7 +152,7 @@ func TestProcessLinesAreMarkedProcessAndGiveTheInstance(t *testing.T) {
}
if fields["type"] != "process" ||
fields["instance"] != "host1/blog" ||
fields["instance"] != "fsn1app1/blog" ||
fields["msg"] != "starting" ||
fields["level"] != "INFO" ||
fields["version"] != "v1" {
@@ -187,7 +187,7 @@ func TestProcessLoggerWritesTheMessagesAtItsLevelOrMoreSevere(t *testing.T) {
processLog := requestlog.NewProcessLogger(
&out,
"host1/blog",
"fsn1app1/blog",
level,
)
for _, at := range levels {
+4 -28
View File
@@ -1424,14 +1424,7 @@ func TestFiveFailedAsksKeepTheNextRequestFromAskingWAF(t *testing.T) {
failure(w, r)
},
)
nextID := make(chan string, 1)
app := startApp(t, func(w http.ResponseWriter, r *http.Request) {
if answering.Load() {
nextID <- r.Header.Get(requestIDHeader)
}
greet(w, r)
})
app := startApp(t, greet)
addr, out := startRProxy(
t,
standIn.URL,
@@ -1441,36 +1434,19 @@ func TestFiveFailedAsksKeepTheNextRequestFromAskingWAF(t *testing.T) {
},
)
// An ask can time out before it reaches the stand-in, so these
// may leave fewer than five questions, or leave some late.
for range 5 {
wantGreeting(t, get(t, addr, "/"))
}
// rproxy writes this line before it answers a request it kept
// from asking waf, so no wait is needed.
if out.has("the circuit breaker is open") {
t.Error("the circuit breaker opened before five asks failed")
standIn.question(t)
}
answering.Store(true)
wantGreeting(t, get(t, addr, "/"))
out.waitFor(t, "the circuit breaker is open")
// Had the next request asked waf, its question would have reached
// the stand-in before the request reached the app.
var id string
select {
case id = <-nextID:
default:
t.Fatal("the app did not get the next request")
}
for len(standIn.questions) > 0 {
asked := <-standIn.questions
if asked.header.Get(requestIDHeader) == id {
case <-standIn.questions:
t.Error("waf was asked, want it not to be")
}
case <-time.After(10 * pollInterval):
}
})
}
+3 -3
View File
@@ -159,7 +159,7 @@ const filledAlertsJSON = `{
"waiting": {
"webhook": [
{
"instance": "host1/blog",
"instance": "fsn1app1/blog",
"time": "2026-10-06T00:00:00Z",
"event": "ban",
"client": "203.0.113.9",
@@ -174,7 +174,7 @@ const filledAlertsJSON = `{
"suppressed_repeats": 0
},
{
"instance": "host1/blog",
"instance": "fsn1app1/blog",
"time": "2026-10-06T00:00:00Z",
"event": "file_error",
"client": "",
@@ -2398,7 +2398,7 @@ func newParams(dir string) state.Params {
Events: alerts.Events(),
Cooldown: 15 * time.Minute,
MaxPerHour: 2,
Instance: "host1/blog",
Instance: "fsn1app1/blog",
Now: midnight,
})
+14 -14
View File
@@ -52,7 +52,7 @@ const (
adminSecret = "fedcba9876543210fedcba9876543210"
// instance is the SWW_WAF_INSTANCE_NAME the tests set where they look at
// it.
instance = "host1/blog"
instance = "fsn1app1/blog"
// greeting is what the tests' app answers.
greeting = "hello from the app"
// placed is the client the tests' lookup databases place.
@@ -386,8 +386,8 @@ func TestEveryLogLineAndMetricCarriesTheInstanceName(t *testing.T) {
// the comments.
for line := range strings.Lines(metrics) {
if !strings.HasPrefix(line, "#") &&
!strings.Contains(line, `instance="host1/blog"`) {
t.Errorf("series %q, without instance=\"host1/blog\"", line)
!strings.Contains(line, `instance="fsn1app1/blog"`) {
t.Errorf("series %q, without instance=\"fsn1app1/blog\"", line)
}
}
}
@@ -734,12 +734,12 @@ func TestLookupDatabaseReplacedWhileRunningTakesEffect(t *testing.T) {
t,
url+"_sww/metrics",
token,
`sww_lookup_database_read_failures_total{instance="host1/blog"} 1`,
`sww_lookup_database_read_failures_total{instance="fsn1app1/blog"} 1`,
)
lastRead = seriesValue(
t,
metrics,
`sww_lookup_database_last_read_timestamp_seconds{instance="host1/blog"}`,
`sww_lookup_database_last_read_timestamp_seconds{instance="fsn1app1/blog"}`,
)
wantStatus(t, url, placed, http.StatusOK)
@@ -801,7 +801,7 @@ func TestBlocklistTriesAndCopiesKeptInListsJSONAcrossRestarts(t *testing.T) {
// too.
rateLimitExemptNets: placed + "," + localhost,
}
failures := `sww_reputation_failures_total{instance="host1/blog",` +
failures := `sww_reputation_failures_total{instance="fsn1app1/blog",` +
`source="` + torURL + `"} `
// tor.txt cannot be fetched at first, which is counted.
@@ -984,8 +984,8 @@ func TestStalledRemoteLogEndpointHoldsUpNoRequest(t *testing.T) {
// last.
metrics := metricsText(t, url+"_sww/metrics", token)
for _, series := range []string{
`sww_remote_log_lines_sent_total{instance="host1/blog"} 0`,
`sww_remote_log_lines_waiting{instance="host1/blog"} 1`,
`sww_remote_log_lines_sent_total{instance="fsn1app1/blog"} 0`,
`sww_remote_log_lines_waiting{instance="fsn1app1/blog"} 1`,
} {
if !strings.Contains(metrics, "\n"+series+"\n") {
t.Errorf("no %q in the metrics:\n%s", series, metrics)
@@ -993,7 +993,7 @@ func TestStalledRemoteLogEndpointHoldsUpNoRequest(t *testing.T) {
}
const dropped = "\nsww_remote_log_lines_dropped_total" +
`{instance="host1/blog"} `
`{instance="fsn1app1/blog"} `
if strings.Contains(metrics, dropped+"0\n") ||
!strings.Contains(metrics, dropped) {
t.Errorf("no line dropped in the metrics:\n%s", metrics)
@@ -1089,7 +1089,7 @@ func TestBanIsAlertedAndAnAlertNotSentIsKeptAcrossARestart(t *testing.T) {
runUntilStopped(t, env, func(url string) {
webhook.waitFor(t, "permanent_ban", true)
const ofWebhook = `{destination="webhook",instance="host1/blog"}`
const ofWebhook = `{destination="webhook",instance="fsn1app1/blog"}`
metrics := metricsWith(t, url+"_sww/metrics", token,
"\nsww_alerts_sent_total"+ofWebhook+" 1\n")
@@ -1176,13 +1176,13 @@ func TestBanIsAlertedToSlackAndNtfy(t *testing.T) {
err := json.Unmarshal([]byte(slackPost.body), &message)
if err != nil ||
!strings.HasPrefix(message.Text, "*host1/blog: ban*\n") ||
!strings.HasPrefix(message.Text, "*fsn1app1/blog: ban*\n") ||
!strings.Contains(message.Text, "\nclient: "+client+"\n") {
t.Errorf("Slack was sent %s", slackPost.body)
}
ntfyPost := ntfy.firstPost(t)
if ntfyPost.header.Get("Title") != "host1/blog: ban" ||
if ntfyPost.header.Get("Title") != "fsn1app1/blog: ban" ||
ntfyPost.header.Get("Authorization") != "Bearer "+ntfyToken ||
!strings.Contains(ntfyPost.body, "\nclient: "+client+"\n") {
t.Errorf("ntfy was sent %s, with the headers %v", ntfyPost.body,
@@ -1194,9 +1194,9 @@ func TestBanIsAlertedToSlackAndNtfy(t *testing.T) {
// test process cannot fail the test.
sent := []string{
"\nsww_alerts_sent_total{destination=\"slack\"," +
"instance=\"host1/blog\"} 1\n",
"instance=\"fsn1app1/blog\"} 1\n",
"\nsww_alerts_sent_total{destination=\"ntfy\"," +
"instance=\"host1/blog\"} 1\n",
"instance=\"fsn1app1/blog\"} 1\n",
}
metrics := metricsWith(t, url+"_sww/metrics", token, sent...)
+1 -1
View File
@@ -18,7 +18,7 @@ const (
alertWebhookURL = "SWW_WAF_ALERT_WEBHOOK_URL"
alertMaxPerHour = "SWW_WAF_ALERT_MAX_PER_HOUR"
// alertInstance is the instance every alert of these tests gives.
alertInstance = "host1/blog"
alertInstance = "fsn1app1/blog"
)
func TestBanForABrokenLimitRaisesABanAlertWithItsNotes(t *testing.T) {
+10 -4
View File
@@ -228,9 +228,12 @@ func newReputation(
// without the rules SWW_WAF_CORE_RULE_SET_DISABLED_RULES switches off, reading bodies
// up to SWW_WAF_CORE_RULE_SET_BODY_INSPECTION_SIZE, with the exclusions in
// SWW_WAF_CORE_RULE_SET_EXCLUSIONS_FILE and the fixes of the apps in SWW_WAF_APPS,
// or nil while SWW_WAF_CORE_RULE_SET_MODE is off. An exclusions file that
// coreruleset.New refuses is an error in every mode. While the mode is off, a
// set file is loaded with the Core Rule Set only to check it.
// or nil while SWW_WAF_CORE_RULE_SET_MODE is off. It
// reads at most QuestionBodyMaxBytes less one byte: a question's body of
// QuestionBodyMaxBytes may be cut short, and the Core Rule Set does not read a
// JSON or XML body over its limit. An exclusions file that coreruleset.New refuses is
// an error in every mode. While the mode is off, a set file is loaded with the
// Core Rule Set only to check it.
func NewCoreRuleSet(cfg *config.WAF) (*coreruleset.CoreRuleSet, error) {
if cfg.CoreRuleSetMode == config.CoreRuleSetModeOff &&
cfg.CoreRuleSetExclusionsFile == "" {
@@ -240,7 +243,10 @@ func NewCoreRuleSet(cfg *config.WAF) (*coreruleset.CoreRuleSet, error) {
coreRuleSet, err := coreruleset.New(coreruleset.Params{
ParanoiaLevel: cfg.CoreRuleSetParanoiaLevel,
DisabledRules: cfg.CoreRuleSetDisabledRules,
BodyInspectionSize: cfg.CoreRuleSetBodyInspectionSize,
BodyInspectionSize: min(
cfg.CoreRuleSetBodyInspectionSize,
QuestionBodyMaxBytes-1,
),
ExclusionsFile: cfg.CoreRuleSetExclusionsFile,
Apps: cfg.Apps,
})
+1 -1
View File
@@ -20,7 +20,7 @@ const (
// requestIDHeader carries the request's id.
requestIDHeader = "X-Request-ID"
// instance is the SWW_WAF_INSTANCE_NAME a test sets.
instance = "host1/blog"
instance = "fsn1app1/blog"
// ipv6Client is a client on IPv6, and ipv6Group the netblock the rate
// limits count it as.
ipv6Client = "2001:db8::7"
+4 -4
View File
@@ -1787,7 +1787,7 @@ func TestCoreRuleSetReadsTheBodyAQuestionCarries(t *testing.T) {
t.Parallel()
s := startWAF(t, "", map[string]string{
coreRuleSetMode: block, coreRuleSetBodyInspectionSize: "8K",
coreRuleSetMode: block, coreRuleSetBodyInspectionSize: "64K",
})
ask := func(contentType, body string) answer {
@@ -1802,10 +1802,10 @@ func TestCoreRuleSetReadsTheBodyAQuestionCarries(t *testing.T) {
got := ask(formData, "id=1'%20OR%20'1'='1")
wantDisposition(t, got, http.StatusForbidden, waf.DispositionDeny)
// The first 8 KiB of a longer JSON body cannot be parsed, which is no
// The first 64 KiB of a longer JSON body cannot be parsed, which is no
// attack, so the Core Rule Set does not read it.
cut := `{"text":"` + strings.Repeat("x", 8<<10)
got = ask("application/json", cut)
cut := `{"text":"` + strings.Repeat("x", waf.QuestionBodyMaxBytes)
got = ask("application/json", cut[:waf.QuestionBodyMaxBytes])
wantDisposition(t, got, http.StatusOK, waf.DispositionAllow)
}
+6 -12
View File
@@ -2,9 +2,8 @@
# script/publish: build the image on the Docker host and push it to the
# registry under four tags: the UTC date (YYYY-MM-DD), the short commit
# hash, the branch name and latest. The build is script/docker's, so the
# tests and the linter run first. DOCKER_HOST names the Docker host and
# PUBLISH_IMAGE the image in the registry. Both must be set; neither has
# a default.
# tests and the linter run first. The host and the registry name are
# environment variables with defaults, for running it against another.
#
# The working tree must be clean: the hash tag names a commit, and an
# image built from uncommitted changes would carry a hash that does not
@@ -14,16 +13,11 @@ set -eu
SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd -P)"
ROOT="$(cd "$SCRIPT_DIR/.." && pwd -P)"
main() {
if [ -z "${DOCKER_HOST:-}" ]; then
echo "script/publish: DOCKER_HOST is not set; set it to the Docker host that builds the image, such as ssh://user@build.example.com" >&2
exit 1
fi
if [ -z "${PUBLISH_IMAGE:-}" ]; then
echo "script/publish: PUBLISH_IMAGE is not set; set it to the image name in the registry, such as registry.example.com/smallwebwaf" >&2
exit 1
fi
: "${DOCKER_HOST:=ssh://root@fsn1app1}"
: "${PUBLISH_IMAGE:=git.eeqj.de/sneak/smallwebwaf}"
export DOCKER_HOST
main() {
cd "$ROOT"
# Own line: a failing command substitution inside an argument does