rproxy: circuit breaker for asks to waf (closes #392)

Five asks that get no answer in time within five seconds open the
breaker. While open, a request takes
SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION without asking waf, except
one ask a second; the first answer closes it. Slow answers count as
failures. SPEC.md describes it.

The sww test that stops and restarts waf now waits for the breaker to
close before it expects the ban again.

Model: opus-5-5

README.md

@@ -2,7 +2,20 @@
 
 `smallwebwaf` is an MIT-licensed web application firewall, written in Go by
 [@sneak](https://sneak.berlin), for self-hosted web apps. It refuses the
-requests of scrapers, scanners and other abusers before they reach an app.
+requests of misbehaving scrapers, scanners and other abusers before they reach
+an app.
+
+With the default settings, a client is banned when it does any of these:
+
+- makes more than 120 requests in a minute, 1500 in an hour or 6000 in a day;
+- moves more than `50G` of request and response bodies in an hour, or `100G` in
+  a day;
+- asks for a secret or backup file, such as `/.env` or `/.git/config`;
+- sends a user agent that names a security scanner, such as `sqlmap` or `nikto`;
+- has more than 30 requests in a minute refused as probes or attacks.
+
+A scraper that does none of these is left alone. A scraper that waits 15 seconds
+between requests stays under the rate limits.
 
 ## What it does
 
@@ -10,10 +23,10 @@ A web application firewall reads each request on its way to a web app and
 refuses the ones that look like abuse. `smallwebwaf` is one program, `sww`,
 shipped in one image, with two commands that do this together:
 
-- `sww rproxy` is a small reverse proxy in front of one app. traefik routes to
-  it. It asks `waf` about each request, passes the allowed ones to the app, and
-  passes the app's answers back. It keeps nothing between requests and writes
-  nothing to disk.
+- `sww rproxy` is a small reverse proxy in front of one app. It sits behind a
+  TLS-terminating proxy, such as traefik, nginx or Caddy. It asks `waf` about
+  each request, passes the allowed ones to the app, and passes the app's answers
+  back. It writes nothing to disk.
 - `sww waf` decides. It runs the checks and keeps the bans, the counters and
   each client's history. One `waf` serves many sites: a client banned through
   one site is refused on all of them, and its requests on all of them count
@@ -22,7 +35,26 @@ shipped in one image, with two commands that do this together:
 The site keeps answering while `waf` is down, slow or restarting: without an
 answer in time, `rproxy` passes the request to the app.
 
-It protects against:
+`rproxy` also protects the app on its own, whether or not `waf` answers. With
+the default settings, `rproxy`:
+
+- answers `400` to a malformed request, such as a broken header line or a
+  missing `Host`;
+- answers `405` to a method it does not pass on, such as `TRACE`;
+- answers `431` to a request line and headers over 32 KiB together;
+- gives the visitor 60 seconds to send the request line and headers, and then 60
+  seconds more for the whole request to reach the app;
+- answers `413` to a request body over 100 MiB;
+- gives the app's answer 30 minutes to reach the visitor, counted from the end
+  of the request;
+- answers `502` in place of an app's answer whose body is over 1 GiB, or cuts it
+  off if it has started;
+- closes a kept-open connection after 120 seconds idle.
+
+`rproxy` does not limit the number of headers. `waf` limits the number of
+headers and cookies, and the length of the request line and of each header line.
+
+Together, `rproxy` and `waf` protect against:
 
 - Scrapers that fetch every page of a site, all day. Each client gets a limit on
   requests and on body bytes per minute, per hour and per day. The defaults
@@ -44,8 +76,6 @@ It protects against:
       limit, so that they are banned sooner;
     - refuse or limit clients on a blocklist, a DNS blocklist, or with a high
       AbuseIPDB score.
-- Slow and oversized requests. Every request and every answer has a time limit
-  and a size limit.
 
 For the operator, it:
 
@@ -57,8 +87,7 @@ For the operator, it:
 
 Not built, and not planned:
 
-- TLS and routing by host name. Both stay with traefik, the reverse proxy in
-  front of `rproxy`.
+- TLS and routing by host name. Both stay with the TLS-terminating proxy.
 - Browser challenges such as captchas.
 - A web console, or a configuration file.
 - Defence against floods large enough to fill the host's network link.
@@ -90,20 +119,61 @@ accepts connections, whether or not `waf` answers; in `waf`'s container, once
 The usual setup is three containers on one private network:
 
 - the app;
-- `rproxy`, in front of the app, which traefik routes to:
+- `rproxy`, in front of the app, which the TLS-terminating proxy forwards to:
   `SWW_RPROXY_WAF_BACKEND` names `waf` and `SWW_RPROXY_UPSTREAM_URL` names the
   app;
 - `waf`, with `SWW_COMMAND=waf` and a volume at `/var/lib/sww` for its state
   files.
 
-Point traefik's labels at port 8080 of `rproxy`
-(`traefik.http.services.<name>.loadbalancer.server.port=8080`). Publish no port
-of the app or of `waf`. Anything on that network can reach the app around
-`rproxy`, and can ask `waf` questions, so the network holds only what you trust.
-Each further app adds its own container and its own `rproxy`, whose
+Publish no port of the app or of `waf`. Anything on that network can reach the
+app around `rproxy`, and can ask `waf` questions, so the network holds only what
+you trust. Each further app adds its own container and its own `rproxy`, whose
 `SWW_RPROXY_WAF_BACKEND` names the same `waf`. The "Smallest setup" example
 below shows this shape.
 
+### The TLS-terminating proxy
+
+`rproxy` serves plain HTTP. It runs behind any TLS-terminating proxy, such as
+traefik, nginx or Caddy. The TLS-terminating proxy must:
+
+- forward each request to port 8080 of `rproxy` over plain HTTP;
+- keep the visitor's `Host` header;
+- add the visitor's address to `X-Forwarded-For`;
+- set `X-Forwarded-Proto` to the scheme the visitor used;
+- close an unused connection to `rproxy` in under 120 seconds;
+- connect to `rproxy` from an address in `SWW_RPROXY_TRUSTED_PROXIES`, by
+  default `10.0.0.0/8`, `172.16.0.0/12` or `192.168.0.0/16`.
+
+From any other address, `rproxy` ignores the forwarded headers and takes the
+TLS-terminating proxy for the visitor. Every visitor then shares one address,
+and one ban.
+
+traefik and Caddy keep the `Host` header and set both forwarded headers by
+default. traefik's Docker label
+`traefik.http.services.<name>.loadbalancer.server.port=8080` names the port.
+Caddy keeps an unused connection for 120 seconds by default, so its site
+shortens that to 90 seconds:
+
+```caddyfile
+reverse_proxy rproxy:8080 {
+    transport http {
+        keepalive 90s
+    }
+}
+```
+
+By default nginx sends the host in `proxy_pass` as `Host` and sets neither
+forwarded header, so its site sets all three:
+
+```nginx
+location / {
+    proxy_pass http://rproxy:8080;
+    proxy_set_header Host $host;
+    proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+    proxy_set_header X-Forwarded-Proto $scheme;
+}
+```
+
 ### `rproxy` in the app's container
 
 An app's image can instead be built on the `smallwebwaf` image, so that `rproxy`
@@ -154,13 +224,13 @@ entrypoint starts `rproxy` and the app side by side, each as its own user. Run
 the app's image with `SWW_RPROXY_WAF_BACKEND` set. `deploy/example-app` is such
 an app, and the "`rproxy` beside the app" example below runs one.
 
-The app sees the headers traefik sent, with traefik's address added to
-`X-Forwarded-For`, from a TCP peer that is `rproxy`. So the app must trust
-`rproxy`'s address for forwarded headers. In a container of its own, `rproxy` is
-on the private network, which the usual default of a trusted-proxy setting
-covers. Beside the app, its address is `127.0.0.1` or `::1`, which the private
-ranges leave out, so the app's own setting must name them too, as `app.run`
-does.
+The app's TCP peer is `rproxy`. The app sees the headers the TLS-terminating
+proxy sent, with that proxy's address added to `X-Forwarded-For`. So the app
+must trust `rproxy`'s address for forwarded headers. In a container of its own,
+`rproxy` is on the private network, which the usual default of a trusted-proxy
+setting covers. Beside the app, its address is `127.0.0.1` or `::1`, which the
+private ranges leave out, so the app's own setting must name them too, as
+`app.run` does.
 
 ### Checking that it works
 
@@ -168,7 +238,7 @@ does.
   `healthy` for each container of `smallwebwaf`.
 - A log line with `"msg":"starting"` gives the version, the address and every
   setting in effect, with secrets masked.
-- A request to the site through traefik gets the app's answer.
+- A request to the site through the TLS-terminating proxy gets the app's answer.
   `https://<site>/_sww/healthz` answers `ok`. `waf`'s log lines about the
   request have `"action":"forward"`.
 - To see a refusal without banning yourself, run `waf` with
@@ -228,7 +298,7 @@ Every setting the code reads, with its default:
 | `SWW_RPROXY_LISTEN_ADDR`                          | `:8080`                                                                                  | Where `rproxy` listens; leave the host part empty.                                                                                                                                                                                                              |
 | `SWW_RPROXY_TRUSTED_PROXIES`                      | `10.0.0.0/8,172.16.0.0/12,192.168.0.0/16`                                                | The netblocks whose `X-Forwarded-For` `rproxy` believes; set but empty, it believes none.                                                                                                                                                                       |
 | `SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS`               | `2000`                                                                                   | How long `rproxy` waits for `waf`'s answer to a question and to a report, in milliseconds.                                                                                                                                                                      |
-| `SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION`    | `allow`                                                                                  | What `rproxy` does with a request when `waf` cannot be reached or does not answer in time: `allow` passes it to the app, `deny` answers `503`.                                                                                                                  |
+| `SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION`    | `allow`                                                                                  | What `rproxy` does with a request when `waf` gives no answer in time, and while the circuit breaker for asks to `waf` is open: `allow` passes it to the app, `deny` answers `503`.                                                                              |
 | `SWW_RPROXY_MAX_REQUEST_SIZE`                     | `100M`                                                                                   | The largest request body, a size or `off`; a larger one is answered `413`.                                                                                                                                                                                      |
 | `SWW_RPROXY_MAX_RESPONSE_SIZE`                    | `1G`                                                                                     | The largest response body, a size or `off`. The visitor gets `502` in place of a larger one, or it is cut off if it has already started.                                                                                                                        |
 | `SWW_RPROXY_MAX_REQUEST_TIME_MS`                  | `60000`                                                                                  | Two time limits, each this long, in milliseconds or `off`: one for the visitor to send its request line and headers, then one for the whole request to reach the app.                                                                                           |
@@ -260,7 +330,7 @@ Every setting the code reads, with its default:
 | `SWW_WAF_LOOKUP_SOURCE`                           | `geojs`                                                                                  | Where each client's AS number and country come from: `geojs` (a web service), `file` (a local database) or `off`.                                                                                                                                               |
 | `SWW_WAF_LOOKUP_DB_PATH`                          | empty                                                                                    | The IPinfo Lite database file, in its `.mmdb` form, read while the source is `file`.                                                                                                                                                                            |
 | `SWW_WAF_ASN_AND_COUNTRY_LOOKUP_TIMEOUT_MS`       | `800`                                                                                    | How long a request waits for its client's first GeoJS answer when a setting needs it, and how long a request to GeoJS may take, in milliseconds.                                                                                                                |
-| `SWW_WAF_ADD_LOOKUP_HEADERS`                      | `false`                                                                                  | `true` passes the app the client's AS number and country in `X-Client-ASN` and `X-Client-Country`.                                                                                                                                                              |
+| `SWW_WAF_ADD_LOOKUP_HEADERS`                      | `true`, or `false` while the lookup source is `off`                                      | `true` passes the app the client's AS number and country in `X-Client-ASN` and `X-Client-Country`.                                                                                                                                                              |
 | `SWW_WAF_EXCLUSIVELY_ALLOWED_COUNTRIES`           | empty                                                                                    | When set, the only countries whose clients get through; a client the lookup cannot place is refused too.                                                                                                                                                        |
 | `SWW_WAF_TAG_LISTS`                               | empty                                                                                    | Address lists that each add a tag to their clients' requests, as `name=URL` pairs, such as `torexit=https://example.com/tor.txt`.                                                                                                                               |
 | `SWW_WAF_TAG_DENY`                                | empty                                                                                    | Tags whose requests are refused, such as `torexit,country=CN`.                                                                                                                                                                                                  |
@@ -540,9 +610,10 @@ request reaches the app.
 A refused visitor is answered with `SWW_WAF_BAN_RESPONSE`. A `block` rule or a
 Core Rule Set match answers `403` and bans nobody, since the Core Rule Set has
 false positives; such refusals count toward `SWW_WAF_REFUSALS_LIMIT_PER_MINUTE`
-instead. A request over the header limits of step 3 is answered `431`, and bans
-nobody either. `rproxy` itself answers `405` to a method it does not pass on,
-and the status for a size or time limit, such as `413` for a body too large.
+instead. A request over the header limits of step 3 is answered `414` for a
+request line over 8 KiB and `431` otherwise. It bans nobody either. `rproxy`
+itself answers `405` to a method it does not pass on, and the status for a size
+or time limit, such as `413` for a body too large.
 
 ### Clients and bans
 

SPEC.md

@@ -3,7 +3,7 @@
 `smallwebwaf` is a web application firewall for self-hosted apps. It is one
 binary, `sww`, and two of its commands do the work:
 
-- `sww rproxy` is a reverse proxy between traefik and one app.
+- `sww rproxy` is a reverse proxy between a TLS-terminating proxy and one app.
 - `sww waf` decides what happens to each request, for many sites.
 
 This document says what it must do and why, each requirement once. Everything in
@@ -45,7 +45,8 @@ never as a time.
 
 ## Non-goals
 
-- TLS, certificates and routing by host name. Those are traefik's job.
+- TLS, certificates and routing by host name. Those are the job of the
+  TLS-terminating proxy, such as traefik, nginx or Caddy.
 - More than one app behind one `rproxy`. Each app has its own.
 - Browser challenges such as captchas or proof of work. If wanted, chain Anubis
   between `rproxy` and the app.
@@ -151,26 +152,26 @@ field gives that name. `refusal_limit` and `byte_limits` give theirs in
       around its address, a /64 by default, since one abuser usually controls a
       whole /64. A client is therefore one IPv4 address or one IPv6 group.
 3. The header limits (`header_limits`; see "Answering in time"). They come first
-   after `SWW_WAF_ALLOW_NETS`, since they only count header fields and cookies.
-   Next, the tag lists (`tag_lists`; see "Request tags"). Each list that holds
-   the client adds its tag. Next, `routewatch_tags` adds the client's `asn=` and
-   `prefix=` tags while `SWW_WAF_ROUTEWATCH_URL` is set. A client in
-   `SWW_WAF_ALLOW_NETS` skips the header limits and gets no tag.
+   after `SWW_WAF_ALLOW_NETS`, since they only measure lines and count header
+   fields and cookies. Next, the tag lists (`tag_lists`; see "Request tags").
+   Each list that holds the client adds its tag. Next, `routewatch_tags` adds
+   the client's `asn=` and `prefix=` tags while `SWW_WAF_ROUTEWATCH_URL` is set.
+   A client in `SWW_WAF_ALLOW_NETS` skips the header limits and gets no tag.
 4. The static lists. A client in `SWW_WAF_ALLOW_NETS` skips steps 5 to 15, the
    byte limits and the refusal limit. A client in `SWW_WAF_DENY_NETS` is refused
    (`deny_nets`); a client in both lists is let through.
 5. Bans. A client under a ban is refused (`active_ban`; see "Bans").
 6. The lookup, unless `SWW_WAF_LOOKUP_SOURCE` is `off` (see "Lookup of AS number
-   and country"). The request goes on at once. It waits for the first GeoJS
-   answer, up to `SWW_WAF_ASN_AND_COUNTRY_LOOKUP_TIMEOUT_MS`, only when one of
-   these needs it:
+   and country"). The request waits for the first GeoJS answer, up to
+   `SWW_WAF_ASN_AND_COUNTRY_LOOKUP_TIMEOUT_MS`, when one of these needs it:
+    - `SWW_WAF_ADD_LOOKUP_HEADERS`, which is `true` by default;
     - the country list;
     - a biased threshold;
     - `SWW_WAF_TAG_DENY` or `SWW_WAF_TAG_LIMIT_PERCENT` naming an `asn=` or
-      `country=` tag;
-    - `SWW_WAF_ADD_LOOKUP_HEADERS`.
+      `country=` tag.
 
-    A request that ends before the answer comes is logged without it.
+    Otherwise the request goes on at once. A request that ends before the answer
+    comes is logged without it.
 
 7. The country list (`countries`; see "Country list").
 8. The reputation sources (see "Reputation"), in this order:
@@ -197,10 +198,10 @@ field gives that name. `refusal_limit` and `byte_limits` give theirs in
 16. A path under `/_sww/` is answered `404`, so that the app never sees that
     prefix.
 17. `rproxy` passes the request to `SWW_RPROXY_UPSTREAM_URL`, streaming (see
-    "Passing a request to the app"). With `SWW_WAF_ADD_LOOKUP_HEADERS`,
-    `X-Client-ASN` and `X-Client-Country` are added for the app's own logs; a
-    header whose value is unknown is left out. Whatever that setting says, any
-    such header the client sent is removed.
+    "Passing a request to the app"). While `SWW_WAF_ADD_LOOKUP_HEADERS` is
+    `true`, as by default, `X-Client-ASN` and `X-Client-Country` are added for
+    the app's own logs; a header whose value is unknown is left out. Whatever
+    that setting says, any such header the client sent is removed.
 18. After the visitor's answer has ended, `rproxy` sends the report (see "The
     report"). `waf` then counts:
     - For a request it allowed, the body bytes of the response, of the request
@@ -252,9 +253,9 @@ does not reach neighbours who did nothing. Requests refused under a ban are not
 counted against limits. They are counted in the client's history and in the
 ban's notes.
 
-A request over the header limits is refused with `431` before the bans are
-checked (see "Answering in time"). It makes no ban, makes no ban permanent and
-is not counted in a ban's notes.
+A request over the header limits is refused with `414` or `431` before the bans
+are checked (see "Answering in time"). It makes no ban, makes no ban permanent
+and is not counted in a ban's notes.
 
 An offence is a request `waf` holds against the client. It is one of:
 
@@ -1943,10 +1944,10 @@ leave out a cookie only when its name matches exactly, case included.
 ### Ban lengths, response and scope
 
 `SWW_WAF_BAN_RESPONSE` is `403` by default, which makes a ban easy to recognise
-when debugging; `429` and `close` are the alternatives. Behind traefik, `close`
-does not leave the client unanswered: traefik answers `502`, as it does whenever
-its backend drops a connection. `SWW_WAF_BAN_SCOPE_V4_PREFIX` widens an IPv4 ban
-to the surrounding netblock. The four ban lengths are under "Bans".
+when debugging; `429` and `close` are the alternatives. `close` does not leave
+the client unanswered: the TLS-terminating proxy answers `502`, as it does
+whenever its backend drops a connection. `SWW_WAF_BAN_SCOPE_V4_PREFIX` widens an
+IPv4 ban to the surrounding netblock. The four ban lengths are under "Bans".
 
 ### Reputation
 
@@ -2373,15 +2374,15 @@ runs no check, writes no request log line and counts nothing in the metrics.
 answer but the last below carries `X-Sww-Disposition`.
 
 - `X-Sww-Disposition: allow`, status `200`, no body. `rproxy` passes the request
-  to the app. With `SWW_WAF_ADD_LOOKUP_HEADERS` the answer also carries
-  `X-Client-ASN` and `X-Client-Country`, which `rproxy` adds to the request it
-  passes on. A header whose value is unknown is left out.
+  to the app. While `SWW_WAF_ADD_LOOKUP_HEADERS` is `true`, the answer also
+  carries `X-Client-ASN` and `X-Client-Country`, which `rproxy` adds to the
+  request it passes on. A header whose value is unknown is left out.
 - `X-Sww-Disposition: deny`, with the status, headers and body the visitor is to
   get. `rproxy` gives them to the visitor, less this header. The status is one
   of:
     - `SWW_WAF_BAN_RESPONSE`, for a refusal;
     - `403`, for a `block` rule or the Core Rule Set;
-    - `431`, for a request over the header limits;
+    - `414` or `431`, for a request over the header limits;
     - `404`, for a path under `/_sww/` that passes the checks, so that the app
       never sees that prefix.
 - `X-Sww-Disposition: close`, status `200`, no body. This takes the place of a
@@ -2442,22 +2443,31 @@ never wait. These can still wait for GeoJS:
 - a rule file;
 - the Core Rule Set.
 
-The header limits are fixed, with no setting. `waf` refuses a request over
-either one:
+The header limits are fixed, with no setting. A line's length is in bytes and
+does not count its line ending. `waf` refuses a request whose request line is
+longer than 8 KiB with `414`. An example is `GET /search?q=` followed by 30,000
+characters.
 
+It refuses a request with `431` for any of:
+
+- a header line longer than 8 KiB. Each value of a header sent twice is a line
+  of its own. `Host` counts as a line.
 - more than 50 cookies. Each part of its `Cookie` headers between semicolons
   counts as one, unless it is empty or only spaces and tabs.
 - more than 100 header fields. A header sent twice counts twice. `Host` and
   `Transfer-Encoding` do not count. `X-Request-ID` and `X-Forwarded-Proto` do.
 
-Real clients never reach these limits. The answer is `deny` with `431`, and the
-log line's action is `request_header_too_large`. The refusal makes no ban and is
-no offence.
+Real clients rarely reach these limits. nginx refuses lines over 8 KiB by
+default, and Apache's default limit is about the same. The answer is `deny`. The
+log line's action is `request_line_too_long` for `414` and
+`request_header_too_large` for `431`. The refusal makes no ban and is no
+offence.
 
 The header limits are the first check after `SWW_WAF_ALLOW_NETS`. A request over
 them is refused before any later check runs. So it causes no lookup, no query to
 an outside source and no rule match, and the rate limits do not count it. A
-client under a ban or in `SWW_WAF_DENY_NETS` also gets `431` for such a request.
+client under a ban or in `SWW_WAF_DENY_NETS` also gets `414` or `431` for such a
+request.
 
 The limits apply on every path and in every `SWW_WAF_CORE_RULE_SET_MODE`. A
 client in `SWW_WAF_ALLOW_NETS` skips them, as it skips the Core Rule Set. In
@@ -2465,9 +2475,10 @@ client in `SWW_WAF_ALLOW_NETS` skips them, as it skips the Core Rule Set. In
 other check runs on it.
 
 The Core Rule Set runs each of its rules on each cookie, so thousands of small
-cookies would keep it busy for over a second. Within the limits, one long cookie
-or query string can still keep it busy for a fraction of a second. So enough
-such requests at once can overload `waf` past
+cookies would keep it busy for over a second. One 30 KB cookie or query string
+would keep it busy for a third of a second or more. A request with several long
+`Cookie` lines, each within the limits, can keep it as busy. Enough such
+requests at once can still overload `waf` past
 `SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS`.
 
 ### The report
@@ -2572,9 +2583,10 @@ request and ban notes name the site by its host.
 ## `rproxy`
 
 `sww rproxy` is the reverse proxy in front of one app. It asks `waf` about each
-request, and passes on what `waf` allows. It keeps nothing between requests and
-writes nothing to disk. When `waf` cannot be connected to, does not answer at
-all, or does not answer within `SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS`,
+request, and passes on what `waf` allows. It writes nothing to disk. The only
+thing it keeps between requests is its circuit breaker for asks to `waf`. When
+`waf` cannot be connected to, does not answer at all, or does not answer within
+`SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS`,
 `SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION` decides. Its default, `allow`,
 keeps the site answering.
 
@@ -2668,23 +2680,24 @@ log line has status `0`.
 ### Without an answer from `waf`
 
 `SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION` decides what is done with the
-request only when `waf`:
+request when `waf`:
 
 - cannot be connected to;
 - does not answer at all;
 - does not answer within `SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS`, which covers
   connecting, sending the question and reading the whole answer.
 
-An answer whose body breaks off counts as no answer at all.
+An answer whose body breaks off counts as no answer at all. The setting also
+decides, without asking `waf`, while the circuit breaker is open.
 
 `allow`, the default, passes the request to the app. `deny` answers `503`.
 Either way `rproxy` writes a process warning, its log line has
 `waf_backend_no_answer`, and it sends no report.
 
-A visitor can make `waf` slow. A request that keeps `waf` busy past
-`SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS`, like any request while `waf` is overloaded,
-gets `SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION`. With `deny`, such a request
-gets `503` instead of reaching the app.
+`waf` taking longer than `SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS` to decide a request
+is a bug in `waf`. Such a request gets
+`SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION`, like any request while `waf` is
+overloaded. With `deny`, it gets `503` instead of reaching the app.
 
 A path under `/_sww/` that `allow` would pass on is answered `404` instead, so
 that the app never sees that prefix.
@@ -2699,6 +2712,27 @@ A visitor that goes away while `waf` is being asked is no failure of `waf`.
 `SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION` does not apply. Its log line has
 status `0` and no `disposition`.
 
+### The circuit breaker
+
+`rproxy` stops asking `waf` for a while when `waf` keeps failing to answer. An
+ask fails in each case that "Without an answer from `waf`" lists. Any answer in
+time succeeds, whatever it decides, and so does an answer `rproxy` cannot pass
+on. A visitor that goes away while `waf` is being asked counts as neither.
+
+The breaker works like this:
+
+- It opens when 5 asks fail within 5 seconds. Fewer failures never open it.
+- While it is open, a request gets
+  `SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION` at once, without asking `waf`.
+  It gets the same process warning and `waf_backend_no_answer` as a request
+  whose ask failed.
+- While it is open, one request a second still asks `waf`.
+- The first ask that succeeds closes it, and the failures before it no longer
+  count.
+
+The breaker lives in memory, and a restart of `rproxy` closes it. It has no
+settings.
+
 ### Passing a request to the app
 
 `rproxy` sends the app at `SWW_RPROXY_UPSTREAM_URL` the visitor's request: the
@@ -2761,9 +2795,9 @@ its whole body. The visitor gets that answer at once, and the connection closes
 after it.
 
 The largest request line and headers is 32 KiB. A kept-open connection is closed
-after 120 seconds idle. Neither has a setting. traefik, by default, closes an
-unused connection after 90 seconds. So traefik closes first, and never sends a
-request on a connection `rproxy` is closing.
+after 120 seconds idle. Neither has a setting. The TLS-terminating proxy should
+close an unused connection sooner, so that it never sends a request on a
+connection `rproxy` is closing. traefik closes one after 90 seconds by default.
 
 What the visitor gets when a limit is passed:
 
@@ -2814,14 +2848,16 @@ chooses: `waf` runs `waf`, and with it unset the image runs `rproxy`.
 The usual setup is three containers on one private network:
 
 - the app;
-- `rproxy`, which traefik routes to, with `SWW_RPROXY_UPSTREAM_URL` naming the
-  app and `SWW_RPROXY_WAF_BACKEND` naming `waf`;
+- `rproxy`, which the TLS-terminating proxy forwards to, with
+  `SWW_RPROXY_UPSTREAM_URL` naming the app and `SWW_RPROXY_WAF_BACKEND` naming
+  `waf`;
 - `waf`, with `SWW_COMMAND=waf` and a volume for its state files.
 
 Each further app adds its own container and its own `rproxy`, whose
 `SWW_RPROXY_WAF_BACKEND` names the same `waf` (see "Sites"). Anything on that
 network can reach an app around `rproxy`, and can ask `waf` questions or send it
-reports. So the network holds only what you trust.
+reports. So the network holds only what you trust. `README.md` lists what the
+TLS-terminating proxy must do.
 
 ### `rproxy` in the app's container
 
@@ -2893,10 +2929,10 @@ process that stops at start is started again every second, not in a tight loop.
   container's output, which `docker logs` shows.
 - When a service exits, runit runs its `run` script again, and the container
   does not stop. Beside an app, the other process keeps running.
-- While `rproxy` is down, traefik answers `502`. While the app is down, `rproxy`
-  answers `502`, which is not a client offence. While `waf` is down,
-  `SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION` decides (see "Without an answer
-  from `waf`").
+- While `rproxy` is down, the TLS-terminating proxy answers `502`. While the app
+  is down, `rproxy` answers `502`, which is not a client offence. While `waf` is
+  down, `SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION` decides (see "Without an
+  answer from `waf`").
 - Only faults found at start stop `waf`:
     - invalid configuration;
     - a lookup database that is missing or unreadable;
@@ -2929,23 +2965,26 @@ checks:
 - With `SWW_COMMAND` unset, empty or `rproxy`, it passes while `rproxy` answers
   that request on `127.0.0.1`, at the port in `SWW_RPROXY_LISTEN_ADDR`, and the
   app accepts connections at `SWW_RPROXY_UPSTREAM_URL`. It does not ask `waf`,
-  so that the site stays in traefik's routes while `waf` is down.
+  so that the site stays in the TLS-terminating proxy's routes while `waf` is
+  down.
 - With any other value, it fails with a message naming `SWW_COMMAND` and its
   value.
 
-traefik sends a container no requests until it shows as healthy. So the check
-runs every second from the container's start until it first passes, for up to a
-minute, and every 30 seconds after that. An app with a health check of its own
-can replace the image's `HEALTHCHECK` with one that checks both.
+A TLS-terminating proxy that reads Docker's health status, as traefik does,
+sends a container no requests until it shows as healthy. So the check runs every
+second from the container's start until it first passes, for up to a minute, and
+every 30 seconds after that. An app with a health check of its own can replace
+the image's `HEALTHCHECK` with one that checks both.
 
 ### Ports
 
 `rproxy` listens on no port but the one in `SWW_RPROXY_LISTEN_ADDR`, 8080 by
-default, which traefik routes to. It passes requests to the app at
-`SWW_RPROXY_UPSTREAM_URL`, `http://127.0.0.1:8081` by default. Another port may
-be set: the health check follows the setting, and traefik's port label
-(`traefik.http.services.<name>.loadbalancer.server.port`) must name it. An app
-beside `rproxy` must leave that port free.
+default, which the TLS-terminating proxy forwards to. It passes requests to the
+app at `SWW_RPROXY_UPSTREAM_URL`, `http://127.0.0.1:8081` by default. Another
+port may be set: the health check follows the setting, and the TLS-terminating
+proxy must name it, as traefik's port label
+(`traefik.http.services.<name>.loadbalancer.server.port`) does. An app beside
+`rproxy` must leave that port free.
 
 `waf` listens on no port but the one in `SWW_WAF_LISTEN_ADDR`, 8080 by default.
 The questions, the reports and its own endpoints all come there.
@@ -2967,8 +3006,8 @@ host directory, keeps them across deploys. A host directory mounted there needs
 no change of owner, and files an earlier owner left in it can be read and
 replaced. The volume holds a few tens of MiB at most with the defaults, and
 needs no backup beyond the host's own. The image declares no volume, since every
-app image built on it would inherit it. `rproxy` keeps nothing, and needs no
-volume.
+app image built on it would inherit it. `rproxy` writes nothing to disk, and
+needs no volume.
 
 `waf` keeps its cache files in `SWW_WAF_CACHE_DIR`, `/var/cache/sww` by default,
 which the `run` script makes. The cache directory needs no volume and can be
@@ -2986,9 +3025,9 @@ in `docs/settings.md` shows the commands.
 ### Forwarded headers
 
 The app's TCP peer is `rproxy`, and the `X-Forwarded-For` the app receives ends
-with traefik's address, which `rproxy` adds after the visitor's. So the app must
-trust `rproxy`'s address for forwarded headers, besides the private address
-ranges traefik is on.
+with the TLS-terminating proxy's address, which `rproxy` adds after the
+visitor's. So the app must trust `rproxy`'s address for forwarded headers,
+besides the private address ranges the TLS-terminating proxy is on.
 
 - In a container of its own, `rproxy`'s address is on the private network. The
   usual default for a trusted-proxy setting, the private ranges, covers it.

docs/request-log.md

@@ -68,7 +68,8 @@ Every one of these lines has:
 ### Request detail
 
 - `request_id`: the id `rproxy` made for the request when it arrived.
-- `peer_ip`: the address of `rproxy`'s TCP peer, normally traefik.
+- `peer_ip`: the address of `rproxy`'s TCP peer, normally the TLS-terminating
+  proxy.
 - `forwarded_for`: the `X-Forwarded-For` header the visitor's request came with.
 - `client_group`: the client as rate limiting counts it, an IPv4 address as a
   /32 or an IPv6 group.
@@ -102,7 +103,8 @@ Every one of these lines has:
       ban this request made or made permanent;
     - `country_denied`, `client_is_rate_limited`, `blocked_by_block_rule` and
       `blocked_by_core_rule_set`: refused by that check;
-    - `request_header_too_large`: over a header limit;
+    - `request_line_too_long`: a request line over the header limits;
+    - `request_header_too_large`: headers over the header limits;
     - `own_endpoint`: answered at one of `waf`'s own endpoints, or `404` for a
       path under `/_sww/`.
 - `would_action`: in `observe` mode, what `enforce` mode would have done with a
@@ -124,7 +126,10 @@ Every one of these lines has:
     - `rate_limits`: `window`, `count` and `limit`;
     - `trap_paths`: `path`, the trap path asked for;
     - `rule_files`: `rule_id` and `rule_action`, of the rule that refused it;
-    - `header_limits`: `fields`, `fields_limit`, `cookies` and `cookies_limit`;
+    - `header_limits`: for a request line, `request_line_bytes` and
+      `request_line_bytes_limit`; for headers, `longest_header_line_bytes`,
+      `header_line_bytes_limit`, `fields`, `fields_limit`, `cookies` and
+      `cookies_limit`;
     - `core_rule_set`: `score`, and `threshold`,
       `SWW_WAF_CORE_RULE_SET_SCORE_THRESHOLD`;
     - `refusal_limit`: `window`, `count` and `limit`, of the refusal limit;
@@ -233,7 +238,7 @@ meanings where they differ:
 - `disposition`: what was done with the request: `allow`, `deny` or `close`. It
   is `waf`'s answer, or the value of
   `SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION`. It is left out when:
-    - `waf` was not asked, as for the health check;
+    - `rproxy` answered the request itself, as for the health check;
     - the visitor went away while `waf` was being asked;
     - `waf`'s answer had no valid `X-Sww-Disposition`;
     - `rproxy` could not pass on `waf`'s answer, and answered `502`.

docs/settings.md

@@ -150,7 +150,7 @@ cut off; the client is banned.
 - `SWW_WAF_LOOKUP_SOURCE` (default `geojs`): `geojs`, `file` or `off`. `off`
   stops the start while a setting that needs a lookup is set:
     - `SWW_WAF_EXCLUSIVELY_ALLOWED_COUNTRIES`;
-    - `SWW_WAF_ADD_LOOKUP_HEADERS`;
+    - `SWW_WAF_ADD_LOOKUP_HEADERS` set to `true`;
     - `SWW_WAF_TAG_DENY` or `SWW_WAF_TAG_LIMIT_PERCENT` naming a `country=` tag,
       or an `asn=` tag while `SWW_WAF_ROUTEWATCH_URL` is unset;
     - the two byte percentage lists and `SWW_WAF_ASN_LIMIT_PERCENT_URL`;
@@ -161,9 +161,11 @@ cut off; the client is banned.
 - `SWW_WAF_ASN_AND_COUNTRY_LOOKUP_TIMEOUT_MS` (default `800`): how long a
   request waits for its client's first answer from GeoJS, and how long a request
   to GeoJS may take. A time in milliseconds; never `off`.
-- `SWW_WAF_ADD_LOOKUP_HEADERS` (default `false`): `true` has `rproxy` pass the
+- `SWW_WAF_ADD_LOOKUP_HEADERS` (default `true`): `true` has `rproxy` pass the
   app the client's AS number in `X-Client-ASN` and its country in
-  `X-Client-Country`.
+  `X-Client-Country`. The default is `false` while `SWW_WAF_LOOKUP_SOURCE` is
+  `off`. With GeoJS, a new client's first request waits for its answer, up to
+  `SWW_WAF_ASN_AND_COUNTRY_LOOKUP_TIMEOUT_MS`.
 
 ## Country list
 
@@ -421,8 +423,9 @@ A few limits are fixed rather than settings:
 - at most 20,000 anomaly counters are kept;
 - each alert destination's queue holds at most 1,000 alerts;
 - `waf` holds at most 10,000 answered requests awaiting their reports;
-- `waf` refuses a request with more than 50 cookies or more than 100 header
-  fields (see "Answering in time" under "`waf`" in [`SPEC.md`](../SPEC.md));
+- `waf` refuses a request with a request line or header line over 8 KiB, more
+  than 50 cookies or more than 100 header fields (see "Answering in time" under
+  "`waf`" in [`SPEC.md`](../SPEC.md));
 - `rproxy` takes a request line and headers of at most 32 KiB, and closes a
   kept-open connection idle for 120 seconds;
 - `rproxy` reads at most 1 MiB of the body of `waf`'s answer, and answers `502`
@@ -450,10 +453,9 @@ start, and an invalid value stops the start. Any can be given as a file, as a
   for `waf`'s answer, to a question and to a report. A time in milliseconds;
   never `off`.
 - `SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION` (default `allow`): what is done
-  with a request when `waf` cannot be connected to, does not answer at all, or
-  does not answer within `SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS`. `allow` passes it
-  to the app, and `deny` answers `503`. It does not apply to an answer `waf`
-  gives, such as an error.
+  with a request when `waf` gives no answer in time, and while the circuit
+  breaker for asks to `waf` is open. `allow` passes it to the app, and `deny`
+  answers `503`. It does not apply to an answer `waf` gives, such as an error.
 - `SWW_RPROXY_MAX_REQUEST_SIZE` (default `100M`): the largest request body. A
   size or `off`.
 - `SWW_RPROXY_MAX_RESPONSE_SIZE` (default `1G`): the largest response body. A
@@ -475,9 +477,9 @@ start, and an invalid value stops the start. Any can be given as a file, as a
   `10.0.0.0/8,172.16.0.0/12,192.168.0.0/16`): the netblocks whose
   `X-Forwarded-For` is believed. Set but empty, it trusts nothing. A client
   outside these netblocks cannot claim another address. Where other containers
-  reach `rproxy` directly, or visitors on a private network reach traefik, they
-  can name another address in the header. Narrowing the setting to traefik's own
-  network closes that gap.
+  reach `rproxy` directly, or visitors on a private network reach the
+  TLS-terminating proxy, they can name another address in the header. Narrowing
+  the setting to the TLS-terminating proxy's own network closes that gap.
 
 ## The image's command
 

internal/config/waf.go

@@ -84,7 +84,8 @@ type WAF struct {
 	// client's first answer from GeoJS while a setting needs it
 	// (SWW_WAF_ASN_AND_COUNTRY_LOOKUP_TIMEOUT_MS), which cannot be off.
 	// AddLookupHeaders is true when the app is passed the client's AS number
-	// and country in headers (SWW_WAF_ADD_LOOKUP_HEADERS).
+	// and country in headers (SWW_WAF_ADD_LOOKUP_HEADERS), by default unless
+	// LookupSource is off.
 	LookupSource               string
 	LookupDBPath               string
 	ASNAndCountryLookupTimeout time.Duration
@@ -549,7 +550,6 @@ func WAFFromEnvironment(v *viper.Viper) (*WAF, error) {
 			"SWW_WAF_ASN_AND_COUNTRY_LOOKUP_TIMEOUT_MS",
 			"800",
 		),
-		AddLookupHeaders: env.boolean("SWW_WAF_ADD_LOOKUP_HEADERS", "false"),
 		ExclusivelyAllowedCountries: env.countries(
 			"SWW_WAF_EXCLUSIVELY_ALLOWED_COUNTRIES", ""),
 		TagLists:        env.tagLists("SWW_WAF_TAG_LISTS"),
@@ -724,6 +724,9 @@ func WAFFromEnvironment(v *viper.Viper) (*WAF, error) {
 
 	cfg.LogRemoteAppName = env.appName("SWW_WAF_LOG_REMOTE_APP_NAME",
 		cfg.InstanceName, cfg.LogRemoteURL != nil)
+	// The app gets the headers by default, unless no client is looked up.
+	cfg.AddLookupHeaders = env.boolean("SWW_WAF_ADD_LOOKUP_HEADERS",
+		strconv.FormatBool(cfg.LookupSource != off))
 	cfg.BlocklistAction, cfg.BlocklistLimitPercent = env.action(
 		"SWW_WAF_BLOCKLIST_ACTION", "deny")
 	cfg.DNSBLAbuseIPDBAction, cfg.DNSBLAbuseIPDBLimitPercent = env.action(

internal/config/waf_test.go

@@ -287,6 +287,7 @@ func TestDefaults(t *testing.T) {
 	})
 	wantLookupSettings(t, cfg, config.WAF{
 		LookupSource: defaultLookupSource, ASNAndCountryLookupTimeout: 800 * time.Millisecond,
+		AddLookupHeaders: true,
 	})
 	wantByteLimitSettings(t, cfg, config.WAF{
 		BytesLimitPerMinute: 0, BytesLimitPerHour: 50 << 30,
@@ -1395,13 +1396,13 @@ func TestLookupSettingsAsSet(t *testing.T) {
 	t.Parallel()
 
 	cfg := wafFromEnvironment(t, environment{
-		asnAndCountryLookupTimeout: "500", addLookupHeaders: enabled,
+		asnAndCountryLookupTimeout: "500", addLookupHeaders: disabled,
 	})
 	wantLookupSettings(t, cfg, config.WAF{
 		LookupSource: defaultLookupSource, ASNAndCountryLookupTimeout: 500 * time.Millisecond,
-		AddLookupHeaders: true,
 	})
 
+	// With no client looked up, the headers are off unless set.
 	cfg = wafFromEnvironment(t, environment{lookupSource: off})
 	wantLookupSettings(t, cfg, config.WAF{
 		LookupSource: off, ASNAndCountryLookupTimeout: 800 * time.Millisecond,
@@ -1422,6 +1423,10 @@ func TestLookupDBPathGoesWithTheFileSourceAlone(t *testing.T) {
 			cfg.LookupSource, cfg.LookupDBPath, path)
 	}
 
+	if !cfg.AddLookupHeaders {
+		t.Error("headers off by default with lookups from file, want on")
+	}
+
 	for _, tc := range []struct {
 		env  environment
 		want string
@@ -2927,7 +2932,7 @@ func TestLogsEachSettingWithItsValue(t *testing.T) {
 		lookupSource:                   defaultLookupSource,
 		lookupDBPath:                   "",
 		asnAndCountryLookupTimeout:     "800",
-		addLookupHeaders:               disabled,
+		addLookupHeaders:               enabled,
 		allowedCountries:               "",
 		tagLists:                       "",
 		tagDeny:                        "",

internal/requestlog/requestlog.go

@@ -21,7 +21,12 @@ const (
 	// the app.
 	ActionForward = "forward"
 
-	// ActionRequestHeaderTooLarge is a request over the header limits.
+	// ActionRequestLineTooLong is a request whose request line is too long for
+	// the header limits.
+	ActionRequestLineTooLong = "request_line_too_long"
+
+	// ActionRequestHeaderTooLarge is a request whose headers are over the
+	// header limits.
 	ActionRequestHeaderTooLarge = "request_header_too_large"
 
 	// ActionClientIsRateLimited is a request refused because it took its
@@ -143,7 +148,7 @@ type Line struct {
 	// taken with a request it would have refused: ActionClientDenied,
 	// ActionTemporarilyBanned, ActionPermanentlyBanned, ActionCountryDenied,
 	// ActionClientIsRateLimited, ActionBlockedByBlockRule,
-	// ActionBlockedByCoreRuleSet, or, in waf,
+	// ActionBlockedByCoreRuleSet, or, in waf, ActionRequestLineTooLong or
 	// ActionRequestHeaderTooLarge for the header limits.
 	WouldAction string `json:"would_action,omitempty"`
 	// Heuristic is the name of the heuristic that refused the request, in

internal/rproxy/breaker.go

@@ -0,0 +1,83 @@
+package rproxy
+
+import (
+	"errors"
+	"sync"
+	"time"
+)
+
+// What opens the circuit breaker, and how often a request asks waf while it is
+// open.
+const (
+	breakerFailures    = 5
+	breakerWindow      = 5 * time.Second
+	breakerAskInterval = time.Second
+)
+
+// errBreakerOpen is why a request did not ask waf.
+var errBreakerOpen = errors.New(
+	"waf is not asked while the circuit breaker is open",
+)
+
+// breaker is the circuit breaker for asks to waf. It opens when
+// breakerFailures asks fail within breakerWindow. An ask fails when it gets no
+// answer in time. While it is open, at most one request each breakerAskInterval
+// asks waf. The first answer closes it, whatever it decides.
+type breaker struct {
+	mu sync.Mutex
+	// failures holds the times of the latest failed asks, oldest first, at most
+	// breakerFailures of them.
+	failures []time.Time
+	open     bool
+	// lastAsk is when a request last asked waf while the breaker was open.
+	lastAsk time.Time
+}
+
+// mayAsk reports whether a request may ask waf at now. While the breaker is
+// open, it says yes once each breakerAskInterval.
+func (b *breaker) mayAsk(now time.Time) bool {
+	b.mu.Lock()
+	defer b.mu.Unlock()
+
+	if !b.open {
+		return true
+	}
+
+	if now.Sub(b.lastAsk) < breakerAskInterval {
+		return false
+	}
+
+	b.lastAsk = now
+
+	return true
+}
+
+// noteAnswer notes that an ask got an answer in time. It closes the breaker,
+// and forgets the failures before it.
+func (b *breaker) noteAnswer() {
+	b.mu.Lock()
+	defer b.mu.Unlock()
+
+	if b.open {
+		b.open = false
+		b.failures = nil
+	}
+}
+
+// noteFailure notes that an ask that ended at now got no answer in time, and
+// opens the breaker if breakerFailures asks have failed within breakerWindow.
+func (b *breaker) noteFailure(now time.Time) {
+	b.mu.Lock()
+	defer b.mu.Unlock()
+
+	b.failures = append(b.failures, now)
+	if len(b.failures) > breakerFailures {
+		b.failures = b.failures[1:]
+	}
+
+	if !b.open && len(b.failures) == breakerFailures &&
+		now.Sub(b.failures[0]) <= breakerWindow {
+		b.open = true
+		b.lastAsk = now
+	}
+}

internal/rproxy/breaker_test.go

@@ -0,0 +1,142 @@
+package rproxy_test
+
+import (
+	"testing"
+	"time"
+
+	"sneak.berlin/go/smallwebwaf/internal/rproxy"
+)
+
+// The breaker tests give the breaker each time themselves, counted from
+// time.Now(), and never wait.
+
+// fail notes count failed asks on b, one each step from at.
+func fail(b *rproxy.Breaker, at time.Time, count int, step time.Duration) {
+	for i := range count {
+		b.NoteFailure(at.Add(time.Duration(i) * step))
+	}
+}
+
+// openBreaker returns a breaker opened at now by five failed asks, one a
+// second.
+func openBreaker(now time.Time) *rproxy.Breaker {
+	b := &rproxy.Breaker{}
+	fail(b, now.Add(-4*time.Second), 5, time.Second)
+
+	return b
+}
+
+func TestFourFailedAsksWithinFiveSecondsLeaveTheBreakerClosed(t *testing.T) {
+	t.Parallel()
+
+	now := time.Now()
+	b := &rproxy.Breaker{}
+	fail(b, now, 4, time.Second)
+
+	if !b.MayAsk(now.Add(3 * time.Second)) {
+		t.Error("a request may not ask, want it to")
+	}
+}
+
+func TestFiveFailedAsksWithinFiveSecondsOpenTheBreaker(t *testing.T) {
+	t.Parallel()
+
+	now := time.Now()
+	b := openBreaker(now)
+
+	if b.MayAsk(now) {
+		t.Error("a request may ask, want it not to")
+	}
+}
+
+func TestFiveFailedAsksOverMoreThanFiveSecondsLeaveTheBreakerClosed(
+	t *testing.T,
+) {
+	t.Parallel()
+
+	now := time.Now()
+	b := &rproxy.Breaker{}
+	fail(b, now, 5, 1300*time.Millisecond)
+
+	if !b.MayAsk(now.Add(6 * time.Second)) {
+		t.Error("a request may not ask, want it to")
+	}
+}
+
+func TestAnAnswerBeforeTheBreakerOpensDoesNotForgetFailures(t *testing.T) {
+	t.Parallel()
+
+	now := time.Now()
+	b := &rproxy.Breaker{}
+	fail(b, now, 4, time.Millisecond)
+	b.NoteAnswer()
+	b.NoteFailure(now.Add(time.Second))
+
+	if b.MayAsk(now.Add(time.Second)) {
+		t.Error("a request may ask, want it not to")
+	}
+}
+
+func TestAnOpenBreakerLetsOneRequestAskEachSecond(t *testing.T) {
+	t.Parallel()
+
+	now := time.Now()
+	b := openBreaker(now)
+
+	for _, tc := range []struct {
+		after time.Duration
+		want  bool
+	}{
+		{999 * time.Millisecond, false},
+		{time.Second, true},
+		{time.Second, false},
+		{1500 * time.Millisecond, false},
+		{2 * time.Second, true},
+	} {
+		got := b.MayAsk(now.Add(tc.after))
+		if got != tc.want {
+			t.Errorf("may ask %v after it opened: %v, want %v",
+				tc.after, got, tc.want)
+		}
+	}
+}
+
+func TestAFailedAskKeepsTheBreakerOpen(t *testing.T) {
+	t.Parallel()
+
+	opened := time.Now()
+	b := openBreaker(opened)
+	now := opened.Add(time.Second)
+	b.MayAsk(now)
+	b.NoteFailure(now)
+
+	if b.MayAsk(now.Add(999 * time.Millisecond)) {
+		t.Error("a request may ask, want it not to")
+	}
+
+	if !b.MayAsk(now.Add(time.Second)) {
+		t.Error("a request may not ask a second later, want it to")
+	}
+}
+
+func TestOneAnswerClosesTheBreaker(t *testing.T) {
+	t.Parallel()
+
+	opened := time.Now()
+	b := openBreaker(opened)
+	now := opened.Add(time.Second)
+	b.MayAsk(now)
+	b.NoteAnswer()
+
+	if !b.MayAsk(now) {
+		t.Error("a request may not ask, want it to")
+	}
+
+	// The failures before the answer no longer count, so one more does not open
+	// the breaker again.
+	b.NoteFailure(now)
+
+	if !b.MayAsk(now) {
+		t.Error("a request may not ask after one failure, want it to")
+	}
+}

internal/rproxy/export_test.go

@@ -0,0 +1,23 @@
+package rproxy
+
+import "time"
+
+// Breaker is the circuit breaker, for tests that give it the time.
+type Breaker struct {
+	b breaker
+}
+
+// MayAsk reports whether a request may ask waf at now.
+func (b *Breaker) MayAsk(now time.Time) bool {
+	return b.b.mayAsk(now)
+}
+
+// NoteAnswer notes that an ask got an answer in time.
+func (b *Breaker) NoteAnswer() {
+	b.b.noteAnswer()
+}
+
+// NoteFailure notes that an ask that ended at now got no answer in time.
+func (b *Breaker) NoteFailure(now time.Time) {
+	b.b.noteFailure(now)
+}

internal/rproxy/rproxy.go

@@ -4,10 +4,11 @@
 // waf goes to the visitor as waf gave it.
 // SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION decides only when waf cannot
 // be connected to, does not answer at all, or does not answer within
-// SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS. rproxy itself refuses a request with a
-// method it does not pass on, or one it cannot put to waf as the visitor
-// sent it. It keeps nothing between requests and writes nothing to disk. "rproxy" in
-// SPEC.md says what it does.
+// SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS, or while the circuit breaker for asks to
+// waf is open. rproxy itself refuses a request with a method it does not pass
+// on, or one it cannot put to waf as the visitor sent it. It keeps nothing
+// between requests but the circuit breaker, and writes nothing to disk.
+// "rproxy" in SPEC.md says what it does.
 package rproxy
 
 import (
@@ -132,6 +133,8 @@ type handler struct {
 	wafTransport http.RoundTripper
 	// reportURL is where the reports go.
 	reportURL string
+	// breaker is the circuit breaker for asks to waf.
+	breaker breaker
 	// reports waits for the reports being sent. reportsMu guards starting one
 	// against reportsStopped, which is set once nothing is to wait for another.
 	reports        sync.WaitGroup
@@ -196,7 +199,7 @@ func (h *handler) ServeHTTP(w http.ResponseWriter, r *http.Request) {
 		return
 	}
 
-	answer, err := rq.ask(r.Context())
+	answer, err := rq.askUnlessBreakerOpen(r.Context())
 	if err != nil {
 		rq.handleNoUsableAnswer(r.Context(), err)
 

internal/rproxy/rproxy_test.go

@@ -15,6 +15,7 @@ import (
 	"strconv"
 	"strings"
 	"sync"
+	"sync/atomic"
 	"testing"
 	"time"
 
@@ -1395,6 +1396,134 @@ func TestSendsNoReportWithoutAnAnswer(t *testing.T) {
 	standIn.wantNoReport(t)
 }
 
+func TestFiveFailedAsksKeepTheNextRequestFromAskingWAF(t *testing.T) {
+	t.Parallel()
+
+	for name, failure := range map[string]http.HandlerFunc{
+		"no answer at all": func(http.ResponseWriter, *http.Request) {
+			panic(http.ErrAbortHandler)
+		},
+		"a slow answer": func(_ http.ResponseWriter, r *http.Request) {
+			<-r.Context().Done()
+		},
+	} {
+		t.Run(name, func(t *testing.T) {
+			t.Parallel()
+
+			var answering atomic.Bool
+
+			standIn := startWAF(
+				t,
+				func(w http.ResponseWriter, r *http.Request) {
+					if answering.Load() {
+						allow(w, r)
+
+						return
+					}
+
+					failure(w, r)
+				},
+			)
+			app := startApp(t, greet)
+			addr, out := startRProxy(
+				t,
+				standIn.URL,
+				app.URL,
+				map[string]string{
+					wafBackendTimeout: "200",
+				},
+			)
+
+			for range 5 {
+				wantGreeting(t, get(t, addr, "/"))
+				standIn.question(t)
+			}
+
+			answering.Store(true)
+			wantGreeting(t, get(t, addr, "/"))
+			out.waitFor(t, "the circuit breaker is open")
+
+			select {
+			case <-standIn.questions:
+				t.Error("waf was asked, want it not to be")
+			case <-time.After(10 * pollInterval):
+			}
+		})
+	}
+}
+
+func TestVisitorsThatGoAwayWhileWAFIsAskedLeaveTheBreakerClosed(
+	t *testing.T,
+) {
+	t.Parallel()
+
+	var answering atomic.Bool
+
+	standIn := startWAF(t, func(w http.ResponseWriter, r *http.Request) {
+		if answering.Load() {
+			allow(w, r)
+
+			return
+		}
+
+		<-r.Context().Done()
+	})
+	app := startApp(t, greet)
+	addr, out := startRProxy(t, standIn.URL, app.URL, map[string]string{
+		wafBackendTimeout: "60000",
+	})
+
+	// Five of these would open the breaker if they counted as failures.
+	for range 5 {
+		conn := dial(t, addr)
+		send(t, conn, "GET / HTTP/1.1\r\nHost: site.example\r\n\r\n")
+		id := standIn.question(t).header.Get(requestIDHeader)
+
+		_ = conn.Close()
+
+		// rproxy writes the request's log line once it is done with the ask.
+		out.waitFor(t, id)
+	}
+
+	answering.Store(true)
+	wantGreeting(t, get(t, addr, "/"))
+	standIn.question(t)
+}
+
+func TestAnswersThatCannotBePassedOnLeaveTheBreakerClosed(t *testing.T) {
+	t.Parallel()
+
+	var answering atomic.Bool
+
+	tooLarge := overOneMiB(dispositionDeny)
+	standIn := startWAF(t, func(w http.ResponseWriter, r *http.Request) {
+		if answering.Load() {
+			allow(w, r)
+
+			return
+		}
+
+		tooLarge(w, r)
+	})
+	app := startApp(t, greet)
+	addr, _ := startRProxy(t, standIn.URL, app.URL, map[string]string{
+		wafBackendTimeout: "60000",
+	})
+
+	// Five of these would open the breaker if they counted as failures.
+	for range 5 {
+		if got := get(t, addr, "/"); got.status != http.StatusBadGateway {
+			t.Errorf("answered %d, want 502", got.status)
+		}
+
+		standIn.question(t)
+	}
+
+	answering.Store(true)
+	wantGreeting(t, get(t, addr, "/"))
+	standIn.question(t)
+}
+
 func TestAPathUnderOwnPrefixNeverReachesTheApp(t *testing.T) {
 	t.Parallel()
 

internal/rproxy/waf.go

@@ -10,6 +10,7 @@ import (
 	"maps"
 	"net/http"
 	"strings"
+	"time"
 
 	"sneak.berlin/go/smallwebwaf/internal/waf"
 )
@@ -67,7 +68,8 @@ func (rq *request) handleNoUsableAnswer(ctx context.Context, err error) {
 		rq.answer(http.StatusBadGateway)
 	default:
 		// waf cannot be connected to, does not answer at all, or does not answer
-		// within SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS. A request that keeps waf
+		// within SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS; or the circuit breaker
+		// kept the request from asking. A request that keeps waf
 		// busy past SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS, like any request while
 		// waf is overloaded, gets SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION
 		// here. deny closes this, at the cost of answering 503 whenever waf is
@@ -86,6 +88,31 @@ func (rq *request) handleNoUsableAnswer(ctx context.Context, err error) {
 	}
 }
 
+// askUnlessBreakerOpen asks waf, unless the circuit breaker is open and it is
+// not yet time for a request to ask. It then tells the breaker whether waf
+// answered in time. An answer rproxy cannot pass on still came in time. A
+// visitor that goes away tells the breaker nothing. ctx is the request's own
+// context.
+func (rq *request) askUnlessBreakerOpen(
+	ctx context.Context,
+) (*wafAnswer, error) {
+	b := &rq.h.breaker
+	if !b.mayAsk(time.Now()) {
+		return nil, errBreakerOpen
+	}
+
+	answer, err := rq.ask(ctx)
+
+	switch {
+	case err == nil, errors.Is(err, errCannotPassOn):
+		b.noteAnswer()
+	case ctx.Err() == nil:
+		b.noteFailure(time.Now())
+	}
+
+	return answer, err
+}
+
 // ask sends waf the question, and returns its answer, which must have come
 // whole within SWW_RPROXY_WAF_BACKEND_TIMEOUT_MS. It ends when ctx does, as
 // when the visitor goes away.

internal/sww/rproxy_test.go

@@ -260,7 +260,17 @@ func TestTheSiteAnswersWhileWAFIsStoppedAndStartedAgain(t *testing.T) {
 		stop()
 	}()
 
-	wantStatus(t, site+"/", placed, http.StatusForbidden)
+	// The visitor's asks have opened rproxy's circuit breaker, which lets one
+	// request a second ask until one is answered.
+	deadline := time.Now().Add(waitLimit)
+	for statusFrom(t, site+"/", placed) != http.StatusForbidden {
+		if time.Now().After(deadline) {
+			t.Fatalf("request from %s: never answered %d", placed,
+				http.StatusForbidden)
+		}
+
+		time.Sleep(pollInterval)
+	}
 
 	close(visitorStop)
 	<-visitorDone

internal/waf/anomaly_test.go

@@ -349,6 +349,7 @@ func TestRequestCountsForTheASNumberGeoJSGivesBeforeItEnds(t *testing.T) {
 		map[string]string{
 			trustedProxies:                 trustLocalhost,
 			asnAndCountryLookupTimeout:     "3600000",
+			addLookupHeaders:               falseValue,
 			anomalyASN + requestsPerMinute: aLot,
 		})
 	server.Store(started)

internal/waf/answertime_test.go

@@ -39,6 +39,7 @@ const (
 	// The header limits SPEC.md gives.
 	cookieLimit      = 50
 	headerFieldLimit = 100
+	lineLimit        = 8192
 	// cookieHeader is the header the cookie limit counts.
 	cookieHeader = "Cookie"
 	// tooLarge is how waf refuses a request over the header limits.
@@ -104,11 +105,139 @@ func TestHeaderLimitRefusalNamesItsHeuristicCountsAndLimits(t *testing.T) {
 	fillHeaders(req, headerFieldLimit+1)
 	do(t, req)
 
+	// The longest header line is X-Request-ID's, with its 26-character id.
 	wantHeuristic(
 		t,
 		s.out.requestLine(t),
 		"header_limits",
-		`{"fields": 101, "fields_limit": 100, "cookies": 0, "cookies_limit": 50}`,
+		`{"longest_header_line_bytes": 40, "header_line_bytes_limit": 8192,
+		"fields": 101, "fields_limit": 100, "cookies": 0, "cookies_limit": 50}`,
+	)
+}
+
+// longQuery returns a path whose request line, sent by Go's client as
+// "GET <path> HTTP/1.1", is lineBytes long.
+func longQuery(lineBytes int) string {
+	const around = len("GET /?q= HTTP/1.1")
+
+	return "/?q=" + strings.Repeat("a", lineBytes-around)
+}
+
+func TestARequestLineOverTheLimitIsRefusedWith414BeforeAnyOtherCheck(
+	t *testing.T,
+) {
+	t.Parallel()
+
+	for _, tc := range []struct {
+		name      string
+		lineBytes int
+		// cookies is how many cookies the request carries.
+		cookies int
+		status  int
+		action  string
+	}{
+		{
+			"at the limit", lineLimit, 0, http.StatusOK,
+			requestlog.ActionForward,
+		},
+		{
+			"over the limit", lineLimit + 1, 0, http.StatusRequestURITooLong,
+			requestlog.ActionRequestLineTooLong,
+		},
+		{
+			"over the limit and the cookie limit", lineLimit + 1,
+			cookieLimit + 1, http.StatusRequestURITooLong,
+			requestlog.ActionRequestLineTooLong,
+		},
+	} {
+		t.Run(tc.name, func(t *testing.T) {
+			t.Parallel()
+
+			s := startWAF(t, "", map[string]string{coreRuleSetMode: block})
+			req := s.question(siteA, client, longQuery(tc.lineBytes))
+
+			if tc.cookies > 0 {
+				req.Header.Set(cookieHeader, cookies(tc.cookies))
+			}
+
+			got := do(t, req)
+			line := s.out.requestLine(t)
+
+			if tc.status == http.StatusOK {
+				wantDisposition(t, got, tc.status, waf.DispositionAllow)
+			} else {
+				wantDisposition(t, got, tc.status, waf.DispositionDeny)
+			}
+
+			wantLine(t, line, tc.status, tc.action)
+
+			refused := tc.status != http.StatusOK
+			if refused != (line.DurationCoreRuleSetMS == nil) {
+				t.Errorf(
+					"Core Rule Set time %v for a request refused: %t",
+					line.DurationCoreRuleSetMS,
+					refused,
+				)
+			}
+		})
+	}
+}
+
+func TestAHeaderLineOverTheLimitIsRefusedWith431(t *testing.T) {
+	t.Parallel()
+
+	for _, tc := range []struct {
+		name string
+		make func(*http.Request)
+		// refused is true for a request over the limit, and false for one at it.
+		refused bool
+	}{
+		{"a header line at the limit", func(req *http.Request) {
+			req.Header.Set("X-Long", strings.Repeat("a", lineLimit-len("X-Long: ")))
+		}, false},
+		{"a header line over the limit", func(req *http.Request) {
+			req.Header.Set("X-Long", strings.Repeat("a", lineLimit+1-len("X-Long: ")))
+		}, true},
+		{"one cookie over the limit", func(req *http.Request) {
+			req.Header.Set(cookieHeader, "a="+strings.Repeat("a", lineLimit))
+		}, true},
+		{"a Host line over the limit", func(req *http.Request) {
+			req.Host = strings.Repeat("a", lineLimit+1-len("Host: "))
+		}, true},
+		{"a header sent twice, each line within the limit", func(req *http.Request) {
+			req.Header.Add("X-Long", strings.Repeat("a", 8000))
+			req.Header.Add("X-Long", strings.Repeat("a", 8000))
+		}, false},
+	} {
+		t.Run(tc.name, func(t *testing.T) {
+			t.Parallel()
+
+			s := startWAF(t, "", nil)
+			req := s.question(siteA, client, "/")
+			tc.make(req)
+
+			got := do(t, req)
+
+			if tc.refused {
+				wantDisposition(t, got, tooLarge, waf.DispositionDeny)
+			} else {
+				wantDisposition(t, got, http.StatusOK, waf.DispositionAllow)
+			}
+		})
+	}
+}
+
+func TestRequestLineRefusalNamesItsHeuristicLengthAndLimit(t *testing.T) {
+	t.Parallel()
+
+	s := startWAF(t, "", nil)
+	do(t, s.question(siteA, client, longQuery(lineLimit+1)))
+
+	wantHeuristic(
+		t,
+		s.out.requestLine(t),
+		"header_limits",
+		`{"request_line_bytes": 8193, "request_line_bytes_limit": 8192}`,
 	)
 }
 

internal/waf/biased_test.go

@@ -387,12 +387,14 @@ func TestRequestWaitsForItsLookupWhileABiasedThresholdIsSet(t *testing.T) {
 
 			// In a synctest bubble, as
 			// TestRequestWaitsAsLongAsTheASNAndCountryLookupTimeoutSays says,
-			// with a GeoJS that never answers.
+			// with a GeoJS that never answers. The headers, which need the
+			// answer too, are off.
 			synctest.Test(t, func(t *testing.T) {
 				server, out, _ := newWAF(t, silentGeoJSURL, time.Now,
 					map[string]string{
 						asnAndCountryLookupTimeout: strconv.FormatInt(
 							timeout.Milliseconds(), 10),
+						addLookupHeaders: falseValue,
 						tagLists:         "vpn=" + vpnList,
 						tc.setting:       tc.value,
 					})

internal/waf/countries_test.go

@@ -108,8 +108,11 @@ func TestCountryRefusalNamesItsHeuristicCountryAndSetting(t *testing.T) {
 	t.Parallel()
 
 	geojsURL, _ := startGeoJS(t)
+	// The headers are off, so that only the country list makes the request
+	// wait for its answer.
 	s, _, _ := startWithClock(t, geojsURL, map[string]string{
-		asnAndCountryLookupTimeout: "3600000", allowedCountries: "de",
+		asnAndCountryLookupTimeout: "3600000", addLookupHeaders: falseValue,
+		allowedCountries: "de",
 	})
 
 	line := s.get(
@@ -239,7 +242,10 @@ func TestPrivateAddressIsNeverLookedUp(t *testing.T) {
 		name string
 		env  map[string]string
 	}{
-		{"no setting needs the lookup", nil},
+		{
+			"no setting needs the lookup",
+			map[string]string{addLookupHeaders: falseValue},
+		},
 		{"a tag setting needs it", map[string]string{tagDeny: denyKP}},
 	} {
 		t.Run(tc.name, func(t *testing.T) {

internal/waf/headerlimits.go

@@ -10,16 +10,22 @@ import (
 	"sneak.berlin/go/smallwebwaf/internal/requestlog"
 )
 
-// The header limits: the most cookies and header fields a request may have.
-// Real clients never reach them.
+// The header limits: the most cookies and header fields a request may have,
+// and the longest its request line and each header line may be, in bytes, not
+// counting the line ending. Real clients rarely reach them. maxLineBytes is
+// what nginx allows by default.
 const (
 	maxCookies      = 50
 	maxHeaderFields = 100
+	maxLineBytes    = 8 << 10
 )
 
-// headerLimits refuses a request with more than maxHeaderFields header fields
-// or more than maxCookies cookies, with 431. Its figures are the request's
-// header fields and cookies, and the limit of each.
+// headerLimits refuses a request with a request line longer than maxLineBytes,
+// with 414. It refuses a request with a header line longer than maxLineBytes,
+// more than maxHeaderFields header fields or more than maxCookies cookies, with
+// 431. Its figures are the request line's length and its limit for 414. For
+// 431 they are the longest header line, the header fields and the cookies,
+// each with its limit.
 type headerLimits struct{}
 
 func (headerLimits) name() string { return "header_limits" }
@@ -29,20 +35,59 @@ func (headerLimits) check(
 	rq *request,
 	_ time.Time,
 ) *verdict {
+	requestLine := rq.requestLineBytes()
+	if requestLine > maxLineBytes {
+		return &verdict{
+			action: requestlog.ActionRequestLineTooLong,
+			figures: map[string]any{
+				"request_line_bytes":       requestLine,
+				"request_line_bytes_limit": maxLineBytes,
+			},
+		}
+	}
+
+	longest := rq.longestHeaderLineBytes()
 	fields, cookies := rq.headerCounts()
-	if fields <= maxHeaderFields && cookies <= maxCookies {
+
+	if longest <= maxLineBytes && fields <= maxHeaderFields &&
+		cookies <= maxCookies {
 		return nil
 	}
 
 	return &verdict{
 		action: requestlog.ActionRequestHeaderTooLarge,
 		figures: map[string]any{
+			"longest_header_line_bytes": longest,
+			"header_line_bytes_limit":   maxLineBytes,
 			"fields":                    fields, "fields_limit": maxHeaderFields,
 			"cookies": cookies, "cookies_limit": maxCookies,
 		},
 	}
 }
 
+// requestLineBytes returns the length of the request's request line, such as
+// "GET /search?q=x HTTP/1.1", not counting its line ending. The target is the
+// one the visitor sent, which rproxy's question carries unchanged.
+func (rq *request) requestLineBytes() int {
+	return len(rq.in.Method) + len(" ") + len(rq.in.RequestURI) +
+		len(" ") + len(rq.in.Proto)
+}
+
+// longestHeaderLineBytes returns the length of the request's longest header
+// line, such as "Cookie: a=1", not counting its line ending. Each value of a
+// header sent twice is a line of its own, and Host is a line too.
+func (rq *request) longestHeaderLineBytes() int {
+	longest := len("Host: ") + len(rq.in.Host)
+
+	for name, values := range rq.in.Header {
+		for _, value := range values {
+			longest = max(longest, len(name)+len(": ")+len(value))
+		}
+	}
+
+	return longest
+}
+
 // headerCounts returns the request's header fields, each value of a header sent
 // twice being one, and its cookies, each part of a Cookie header between
 // semicolons being one unless it is empty or only spaces and tabs. The Core

internal/waf/heuristics.go

@@ -41,8 +41,8 @@ const (
 
 // beforeLookup are the heuristics that run before the client's AS number and
 // country are looked up, so that a client they refuse is not looked up.
-// header_limits comes first: it only counts, and a request it refuses causes no
-// other work.
+// header_limits comes first: it only measures and counts, and a request it
+// refuses causes no other work.
 func beforeLookup() []heuristic {
 	return []heuristic{
 		headerLimits{},

internal/waf/lookup.go

@@ -12,7 +12,7 @@ import (
 )
 
 // The headers in which an answer of allow gives rproxy the client's AS number
-// and country, for the app, while SWW_WAF_ADD_LOOKUP_HEADERS is set. Go writes
+// and country, for the app, while SWW_WAF_ADD_LOOKUP_HEADERS is true. Go writes
 // every header name in this form, as it sends it and as it receives it, so
 // X-Client-ASN arrives as X-Client-Asn; header names are not case-sensitive.
 const (

internal/waf/lookup_test.go

@@ -36,6 +36,7 @@ func TestEveryClientIsLookedUpWithoutWaitingWhileNoSettingNeedsIt(
 	geojsURL, asked, release := startHeldGeoJS(t)
 	s, _, server := startWithClock(t, geojsURL, map[string]string{
 		asnAndCountryLookupTimeout: "3600000",
+		addLookupHeaders:           falseValue,
 		rateLimitPerMinute:         "1",
 	})
 
@@ -418,7 +419,7 @@ func TestClientsOwnLookupHeadersAreRemovedWhileTheSettingIsOff(
 		geojsURL,
 		time.Now,
 		map[string]string{
-			trustedProxies: trustLocalhost,
+			trustedProxies: trustLocalhost, addLookupHeaders: falseValue,
 		},
 	)
 	s := &sender{t: t, addr: addr, out: out}
@@ -457,6 +458,8 @@ func TestRequestWaitsAsLongAsTheASNAndCountryLookupTimeoutSays(
 			map[string]string{
 				asnAndCountryLookupTimeout: strconv.FormatInt(
 					timeout.Milliseconds(), 10),
+				// Off, so that only the country list makes the request wait.
+				addLookupHeaders: falseValue,
 				allowedCountries: "DE",
 			})
 

internal/waf/proxy_test.go

@@ -93,6 +93,10 @@ const off = "off"
 // on is the value that switches a setting that takes true or false on.
 const on = "true"
 
+// falseValue is the value that switches a setting that takes true or false
+// off.
+const falseValue = "false"
+
 // output collects what sww writes on stdout.
 type output struct {
 	mu  sync.Mutex

internal/waf/request.go

@@ -177,7 +177,7 @@ func requestHeaders(r *http.Request, names []string) map[string]string {
 // check is the one place where a request can be refused. It returns nil to let
 // the request through. The heuristics of checkClient decide: a request they
 // refuse is answered with SWW_WAF_BAN_RESPONSE, 403 for a block rule or the Core
-// Rule Set, or 431 for the header limits. In observe mode nothing is refused,
+// Rule Set, or 414 or 431 for the header limits. In observe mode nothing is refused,
 // and the log line names what enforce mode would have done. ctx is the
 // request's own context.
 func (rq *request) check(ctx context.Context) *refusal {
@@ -196,6 +196,8 @@ func (rq *request) check(ctx context.Context) *refusal {
 	case action == requestlog.ActionBlockedByBlockRule ||
 		action == requestlog.ActionBlockedByCoreRuleSet:
 		return &refusal{status: http.StatusForbidden, action: action}
+	case action == requestlog.ActionRequestLineTooLong:
+		return &refusal{status: http.StatusRequestURITooLong, action: action}
 	case action == requestlog.ActionRequestHeaderTooLarge:
 		return &refusal{
 			status: http.StatusRequestHeaderFieldsTooLarge,

internal/waf/waf.go

@@ -320,7 +320,7 @@ func asTheVisitorSentIt(r *http.Request, body []byte) *http.Request {
 }
 
 // allow answers a question with DispositionAllow and, while
-// SWW_WAF_ADD_LOOKUP_HEADERS is set, the client's AS number and country.
+// SWW_WAF_ADD_LOOKUP_HEADERS is true, the client's AS number and country.
 func (rq *request) allow() {
 	rq.allowed = true
 

internal/waf/waf_test.go

@@ -869,7 +869,7 @@ func TestAllowCarriesTheLookupHeadersWhileTheSettingIsSet(t *testing.T) {
 		wantASN, wantCountry string
 	}{
 		{on, "AS64496", "DE"},
-		{"false", "", ""},
+		{falseValue, "", ""},
 	} {
 		t.Run(tc.setting, func(t *testing.T) {
 			t.Parallel()
@@ -1690,7 +1690,12 @@ func TestALargeBodyAnnouncedAndLongHeadersAreNoReasonToRefuse(t *testing.T) {
 		strings.NewReader("a body"))
 	req.Header.Set(waf.ContentLengthHeader, "1073741824")
 	req.Header.Set(forwardedFor, otherClient)
-	req.Header.Set("X-Long", strings.Repeat("x", 40<<10))
+
+	// 40,000 bytes of headers, over rproxy's 32 KiB, in lines within the
+	// header limits.
+	for i := range 5 {
+		req.Header.Set("X-Long-"+strconv.Itoa(i), strings.Repeat("x", 8000))
+	}
 
 	got := do(t, req)
 	wantDisposition(t, got, http.StatusOK, waf.DispositionAllow)