Core Rule Set: gitea's ordinary requests pass by default (closes #198)

The eighth change, internal/waf/gitea.conf, has some fields skip the
rules that refused ordinary gitea requests there, on gitea's paths only:
searches, file names and branch names. Referer skips 944130 too. A
registry's layer reuse skips 932260 on from, the seventh change.

The new setting SWWAF_CORE_RULE_SET_EXCLUSIONS_FILE loads an operator's
own exclusions before the Core Rule Set's rules. The start stops, in
every mode, on a set file that cannot be read or does not parse, names
smallwebwaf's own ids, or holds a directive such as SecRuleRemoveById.

A test sends the recorded gitea requests at the defaults, none refused,
and three attacks, all refused.

Model: opus-5-5

EVALUATION.md

@@ -153,15 +153,15 @@ Closest existing options, and why each still falls short:
     - What it is: a single-binary reverse proxy that makes browsers solve a
       proof-of-work challenge before passing them to `TARGET`. Aimed at
       scrapers, which is likely a large share of unwanted traffic on a public
-      gitea.
+      code forge.
     - Covers: R10 well (one container, env vars for listener, target,
       difficulty, cookies). Policy rules can match on path, user agent, headers,
       IP ranges, and with the vendor's hosted data service also AS number and
       country, and can weigh a request toward a harder challenge.
     - Misses: R1, R3, R4, R5, R6, R9. Bot policy needs a YAML file, not env
       vars. AS number and country matching depend on the vendor's hosted
-      service. Breaks non-browser clients unless paths are exempted; for gitea,
-      git-over-HTTP and API paths must be allowed through by rule.
+      service. Breaks non-browser clients unless paths are exempted; for a code
+      forge, git-over-HTTP and API paths must be allowed through by rule.
     - Maturity: very active, widely deployed on code forges since 2025.
     - Value here: complementary. It can be chained (traefik, then the sidecar,
       then Anubis, then the app) if challenge pages are wanted.

Makefile

@@ -1,13 +1,11 @@
 .PHONY: bootstrap setup test lint fmt fmt-check tidy check docker hooks build \
-	run example-app gitea-requests gitea-setup
+	run example-app
 
 # Makefile targets are thin shims; the implementations live in script/
 # per the scripts-to-rule-them-all pattern (see the Entrypoints section
 # of README.md). tidy writes go.mod and go.sum as `go mod tidy` does,
 # which test checks. build and run are for working on the code by hand;
-# example-app checks the image with an app built on it; gitea-requests
-# reports the gitea requests the Core Rule Set refuses at the defaults;
-# gitea-setup checks the setup in deploy/gitea.
+# example-app checks the image with an app built on it.
 
 bootstrap:
 	@script/bootstrap
@@ -47,9 +45,3 @@ run:
 
 example-app:
 	@script/example-app
-
-gitea-requests:
-	@script/gitea-requests
-
-gitea-setup:
-	@script/gitea-setup

README.md

@@ -100,8 +100,8 @@ Point traefik's labels at port 8080 of `rproxy`
 of the app or of `servewaf`. Anything on that network can reach the app around
 `rproxy`, and can ask `servewaf` questions, so the network holds only what you
 trust. Each further app adds its own container and its own `rproxy`, whose
-`SWRP_WAF_BACKEND` names the same `servewaf`. The "Smallest setup" and "In front
-of gitea" examples below show this shape.
+`SWRP_WAF_BACKEND` names the same `servewaf`. The "Smallest setup" example below
+shows this shape.
 
 ### `rproxy` in the app's container
 
@@ -192,9 +192,9 @@ account, a key, a token or an alert destination stays off until you give one.
 - Any `SWWAF_` setting can be given as a file instead, for secrets and long
   lists: `SWWAF_ADMIN_TOKEN_FILE` names the file that holds `SWWAF_ADMIN_TOKEN`.
   The file's contents are the value, less one newline at the end. Setting both
-  forms stops the start. `SWWAF_LOG_REMOTE_TLS_CA_FILE` already names a file, so
-  it has no `_FILE` form, and no `SWRP_` setting has one, since `rproxy` never
-  touches disk.
+  forms stops the start. `SWWAF_LOG_REMOTE_TLS_CA_FILE` and
+  `SWWAF_CORE_RULE_SET_EXCLUSIONS_FILE` already name a file, so they have no
+  `_FILE` form. No `SWRP_` setting has one, since `rproxy` never touches disk.
 - A duration is Go's syntax, with `d` for days: `90s`, `15m`, `24h`, `7d`.
 - A size is a number of bytes with an optional `K`, `M` or `G`, in powers of
   1024: `512K`, `100M`, `5G`.
@@ -272,6 +272,7 @@ Every setting the code reads, with its default:
 | `SWWAF_WAF_DISABLED_RULES`                 | `920340,920420,920440,920640,930130,930140`                                    | Core Rule Set rule ids switched off; a list you give replaces the default, so repeat these six to keep them off.                                                    |
 | `SWWAF_WAF_EXEMPT_PATHS`                   | empty                                                                          | Path prefixes the Core Rule Set does not inspect.                                                                                                                   |
 | `SWWAF_WAF_BODY_LIMIT`                     | `off`                                                                          | How much of a request body the Core Rule Set reads, a size up to `64K`; `off` reads none.                                                                           |
+| `SWWAF_CORE_RULE_SET_EXCLUSIONS_FILE`      | unset                                                                          | A file of Core Rule Set exclusions, as Coraza directives, that switch rules off for some fields or paths only.                                                      |
 | `SWWAF_BLOCKLIST_URLS`                     | empty                                                                          | Blocklists to fetch, text files of addresses and netblocks one to a line, such as `https://www.spamhaus.org/drop/drop.txt`.                                         |
 | `SWWAF_BLOCKLIST_REFRESH`                  | `24h`                                                                          | How long after a list was last tried it is fetched again, `1h` or more.                                                                                             |
 | `SWWAF_BLOCKLIST_ACTION`                   | `deny`                                                                         | What a client on a blocklist gets: `deny`, `limit:<percent>` of every limit, or `log`.                                                                              |
@@ -338,9 +339,8 @@ full, and the limits that are fixed rather than settings.
 Each example is a complete `compose.yaml`. `smallwebwaf` is the tag
 `make docker` gives the image; on another host, use the name you pushed it
 under, by digest. Docker Compose puts the services on a private network of its
-own, where each reaches the others by service name. Only "In front of gitea"
-uses traefik. The other three publish `rproxy`'s port on the host, for trying it
-out.
+own, where each reaches the others by service name. Each example publishes
+`rproxy`'s port on the host, for trying it out.
 
 ### Smallest setup
 
@@ -426,88 +426,6 @@ volumes:
     servewaf-state:
 ```
 
-### In front of gitea
-
-gitea behind traefik, set up for a code forge:
-
-- the upload limits raised, in size and in time;
-- the response size limit raised, for clones over 1 GiB;
-- the Actions runners exempt from counting;
-- the default request and byte limits kept.
-
-`traefik` is the network traefik is on, made outside this file.
-
-```yaml
-services:
-    gitea:
-        # gitea 1.27.3, 2026-08-29
-        image: gitea/gitea@sha256:87a67ee09d3ae0d1df5fda5dcda3e2a1f9236a45b0a59025d6e00e46adc43bef
-        environment:
-            GITEA__server__ROOT_URL: https://git.example/
-            # The host and the port of the SSH clone URLs gitea shows.
-            GITEA__server__SSH_DOMAIN: git.example
-            GITEA__server__SSH_PORT: "2222"
-            # gitea's TCP peer is rproxy, on the private network.
-            GITEA__security__REVERSE_PROXY_TRUSTED_PROXIES: 10.0.0.0/8,172.16.0.0/12,192.168.0.0/16
-        volumes:
-            - gitea-data:/data
-        networks:
-            - site
-        ports:
-            # SSH does not pass through smallwebwaf.
-            - "2222:22"
-
-    rproxy:
-        image: smallwebwaf
-        environment:
-            SWRP_WAF_BACKEND: http://servewaf:8080
-            SWRP_UPSTREAM_URL: http://gitea:3000
-            # Pushes, LFS objects and image layers over 100 MiB, or slower
-            # than a minute, are cut off at the defaults.
-            SWRP_MAX_REQUEST_SIZE: 2G
-            SWRP_MAX_REQUEST_TIME_MS: "600000"
-            # A clone larger than 1 GiB is cut off at the default.
-            SWRP_MAX_RESPONSE_SIZE: 4G
-        networks:
-            - site
-            - traefik
-        labels:
-            traefik.enable: "true"
-            # rproxy is on two networks; traefik reaches it on this one.
-            traefik.docker.network: traefik
-            traefik.http.routers.git.rule: Host(`git.example`)
-            traefik.http.routers.git.entrypoints: websecure
-            traefik.http.routers.git.tls.certresolver: letsencrypt
-            traefik.http.services.git.loadbalancer.server.port: "8080"
-
-    servewaf:
-        image: smallwebwaf
-        environment:
-            SMALLWEBWAF_COMMAND: servewaf
-            SWWAF_INSTANCE_NAME: fsn1/servewaf
-            # The Actions runners ask for work all day; never count them.
-            SWWAF_RATE_LIMIT_EXEMPT_NETS: 10.0.4.0/24
-            # gitea never serves these; a request for one bans the client.
-            SWWAF_TRAP_PATHS: /wp-login.php,/xmlrpc.php,/wp-admin/
-        volumes:
-            - servewaf-state:/var/lib/smallwebwaf
-        networks:
-            - site
-
-networks:
-    site:
-    traefik:
-        external: true
-
-volumes:
-    gitea-data:
-    servewaf-state:
-```
-
-`deploy/gitea` holds a complete setup of gitea, traefik included, as a Docker
-Compose file. [`docs/gitea.md`](docs/gitea.md) explains it, and records what the
-defaults do in front of gitea, request by request.
-
 ### `rproxy` beside the app
 
 The app is built on the `smallwebwaf` image, with `rproxy` inside its container.
@@ -636,10 +554,13 @@ and the status for a size or time limit, such as `413` for a body too large.
   headers of every request, and no body unless `SWWAF_WAF_BODY_LIMIT` is set. In
   front of a code forge, bodies carry what people write and publish, which the
   rules take for attacks.
-- `smallwebwaf` changes the Core Rule Set in six ways so that it lets ordinary
+- `smallwebwaf` changes the Core Rule Set in eight ways so that it lets ordinary
   requests to a code forge through, such as git over HTTP and sign-in through
-  Git Credential Manager. No setting undoes them; "Attack detection" in
-  [`SPEC.md`](SPEC.md) lists them.
+  Git Credential Manager. On gitea's own paths, its searches, file names and
+  branch names get through too. No setting undoes the changes; "Attack
+  detection" in [`SPEC.md`](SPEC.md) lists them.
+- `SWWAF_CORE_RULE_SET_EXCLUSIONS_FILE` switches single rules off for an app's
+  own fields or paths.
 - Rule files are plain text, one rule to a line, edited by hand and read again
   while `servewaf` runs. The image ships one file of probes no real visitor
   sends (see [`docs/rules.md`](docs/rules.md)).
@@ -771,18 +692,6 @@ on the host.
     - orderly stops with `sv stop` and `docker stop`;
     - bans surviving a new container on the same volume;
     - a setting given as a file.
-- `script/gitea-requests`: builds the image and runs gitea 1.27.3 behind
-  `rproxy` and `servewaf`, three containers on one network. Every setting is at
-  its default, but for those that join the containers and
-  `SWWAF_LOG_REQUEST_HEADERS`, which adds the header that labels each request.
-  It sends through them a sample of gitea's ordinary use and the requests the
-  Core Rule Set is known to refuse, and prints what `servewaf` did with each.
-  Needs network access, and a docker daemon that pushes to a registry on
-  `localhost` over plain HTTP. `make gitea-requests`.
-- `script/gitea-setup`: builds the image, brings up the setup in `deploy/gitea`,
-  and checks it as [`docs/gitea.md`](docs/gitea.md) describes. Then it removes
-  the containers, the network, the volumes and the image it built. Needs network
-  access. `make gitea-setup`.
 
 ## TODO
 
@@ -806,8 +715,6 @@ on the host.
 - [`docs/state-files.md`](docs/state-files.md): the state files and what each
   holds.
 - [`docs/image.md`](docs/image.md): what the image holds and how it is pinned.
-- [`docs/gitea.md`](docs/gitea.md): `smallwebwaf` in front of gitea: the setup
-  in `deploy/gitea`, and what the defaults do there.
 
 ## License
 

SPEC.md

@@ -36,7 +36,8 @@ to them.
     - the state files;
     - a lookup database;
     - a `SWWAF_` setting given as a file;
-    - the file `SWWAF_LOG_REMOTE_TLS_CA_FILE` names.
+    - the file `SWWAF_LOG_REMOTE_TLS_CA_FILE` names;
+    - the file `SWWAF_CORE_RULE_SET_EXCLUSIONS_FILE` names.
 
 ## Non-goals
 
@@ -81,7 +82,7 @@ to them.
       of bans is full.
     - `internal/rules`: reads the rule files at start and again when they
       change, and tells which rules a request matches.
-    - `internal/waf`: the Core Rule Set, with the six changes listed under
+    - `internal/waf`: the Core Rule Set, with the eight changes listed under
       "Attack detection", as Coraza directives.
     - `internal/lookup`: looks clients up through GeoJS or in the lookup
       database.
@@ -123,9 +124,7 @@ runs steps 3 to 13, and does the counting of step 15. The first step that
 produces a final answer ends the checks. Step 15 runs for each request
 `servewaf` answers with `allow`, `deny` or `close`. `rproxy`'s size and time
 limits apply to the whole exchange. Each step names the section that holds its
-rules. Each check is a heuristic. Its name, in parentheses below, is the value
-of the request log's `heuristic` field. `refusal_limit` and `byte_limits` give
-theirs in `after_answer_heuristic` instead.
+rules.
 
 1. `GET /_smallwebwaf/healthz` is answered at once by `rproxy`, before any
    check, so a health checker never needs an exemption and is never refused.
@@ -143,9 +142,9 @@ theirs in `after_answer_heuristic` instead.
       around its address, a /64 by default, since one abuser usually controls a
       whole /64. A client is therefore one IPv4 address or one IPv6 group.
 3. The static lists. A client in `SWWAF_ALLOW_NETS` skips steps 4 to 12, the
-   byte limits and the error burst. A client in `SWWAF_DENY_NETS` is refused
-   (`deny_nets`); a client in both lists is let through.
-4. Bans. A client under a ban is refused (`active_ban`; see "Bans").
+   byte limits and the error burst. A client in `SWWAF_DENY_NETS` is refused; a
+   client in both lists is let through.
+4. Bans. A client under a ban is refused (see "Bans").
 5. The lookup, unless `SWWAF_LOOKUP_SOURCE` is `off` (see "Lookup of AS number
    and country"). The request goes on at once. It waits for the first GeoJS
    answer, up to `SWWAF_LOOKUP_TIMEOUT`, only when one of these needs it:
@@ -155,26 +154,22 @@ theirs in `after_answer_heuristic` instead.
 
     A request that ends before the answer comes is logged without it.
 
-6. The country lists (`countries`; see "Country lists").
-7. The reputation sources (see "Reputation"), in this order:
-    - A client on a fetched blocklist gets `SWWAF_BLOCKLIST_ACTION`
-      (`blocklists`).
-    - A client on the CrowdSec decision list is banned (`crowdsec`).
-    - A client listed by a DNS blocklist gets `SWWAF_REPUTATION_ACTION`
-      (`dnsbl`).
-    - A client scored at least `SWWAF_ABUSEIPDB_MIN_SCORE` by AbuseIPDB gets
-      `SWWAF_REPUTATION_ACTION` (`abuseipdb`).
+6. The country lists (see "Country lists").
+7. The reputation sources (see "Reputation"). A client on a fetched blocklist
+   gets `SWWAF_BLOCKLIST_ACTION`. A client on the CrowdSec decision list is
+   banned. A client listed by a DNS blocklist, or scored at least
+   `SWWAF_ABUSEIPDB_MIN_SCORE` by AbuseIPDB, gets `SWWAF_REPUTATION_ACTION`.
 8. The client's limit percentage (see "Biased thresholds").
-9. Rate limiting (`rate_limits`; see "Request rate limits, per client"). A
-   request over a limit times the percentage is refused and bans the client.
-10. The trap paths (`trap_paths`; see "Attack detection"). A request for one is
-    refused and bans the client.
-11. The rule files (`rule_files`; see "Rule files"). Matching stops at the first
-    rule that refuses.
-12. The header limits (`header_limits`; see "Answering in time"), and then the
-    Core Rule Set (`core_rule_set`; see "Attack detection"). A Core Rule Set
-    match is refused with `403` while `SWWAF_WAF_MODE` is `block`, and only
-    logged and alerted while it is `detect`.
+9. Rate limiting (see "Request rate limits, per client"). A request over a limit
+   times the percentage is refused and bans the client.
+10. The trap paths (see "Attack detection"). A request for one is refused and
+    bans the client.
+11. The rule files (see "Rule files"). Matching stops at the first rule that
+    refuses.
+12. The header limits (see "Answering in time"), and then the Core Rule Set (see
+    "Attack detection"). A Core Rule Set match is refused with `403` while
+    `SWWAF_WAF_MODE` is `block`, and only logged and alerted while it is
+    `detect`.
 13. A path under `/_smallwebwaf/` is answered `404`, so that the app never sees
     that prefix.
 14. `rproxy` passes the request to `SWRP_UPSTREAM_URL`, streaming (see "Passing
@@ -188,14 +183,14 @@ theirs in `after_answer_heuristic` instead.
       are added to the byte counters, as `SWWAF_BYTES_COUNT` says. For a
       WebSocket, what it carried each way counts once it closes. A client whose
       total passes a byte limit times the percentage has broken that limit and
-      is banned (`byte_limits`). The response in progress is not cut off.
+      is banned. The response in progress is not cut off.
     - For a request it allowed, the client's history and the anomaly counters
       are updated, and the alert thresholds are evaluated.
 
     For a request it refused, `servewaf` adds nothing to the byte limits. It
     updates the history and the anomaly counters at its decision. It counts the
-    refusals the error burst counts at the decision too (`refusal_limit`; see
-    "Attack detection").
+    refusals the error burst counts at the decision too (see "Attack
+    detection").
 
 In `SWWAF_MODE=observe`, every refusal above is logged as what would have
 happened, nothing is refused, and `servewaf` makes no ban of its own. A path
@@ -331,9 +326,10 @@ Conventions:
   lists: `SWWAF_ADMIN_TOKEN_FILE` names the file that holds `SWWAF_ADMIN_TOKEN`.
   The file's contents are the value, less one newline at the end, and are
   checked as the value itself would be. Setting both forms stops the start, and
-  so does naming a file that cannot be read. `SWWAF_LOG_REMOTE_TLS_CA_FILE`
-  already holds a file name, so it has no `_FILE` form. No `SWRP_` setting has
-  one, since `rproxy` never touches disk.
+  so does naming a file that cannot be read. `SWWAF_LOG_REMOTE_TLS_CA_FILE` and
+  `SWWAF_CORE_RULE_SET_EXCLUSIONS_FILE` already hold a file name, so they have
+  no `_FILE` form. No `SWRP_` setting has one, since `rproxy` never touches
+  disk.
 - Settings, files included, are read once at start. Changing one means
   restarting the container. The files `servewaf` watches while it runs are its
   state files, its rule files and the lookup database.
@@ -408,10 +404,10 @@ scrapers that send many requests slowly over hours or days. The hour limit is
 the main one.
 
 - Per minute: 120, 2 requests a second. It leaves room for a person opening two
-  pages at once with an empty cache. A gitea page opened with an empty cache
+  pages at once with an empty cache. A web app's page opened with an empty cache
   loads 20 to 60 files, and a handful once cached.
-- Per hour: 1,500. A person reading code in gitea for a whole hour, a page every
-  20 seconds, makes about 900 requests. A scraper making one request every 2
+- Per hour: 1,500. A person reading a site for a whole hour, a page every 20
+  seconds, makes about 900 requests. A scraper making one request every 2
   seconds makes 1,800 an hour, more than the limit.
 - Per day: 6,000, four hours at the hour limit. A scraper making one request
   every 10 seconds makes 8,640 a day, more than the limit.
@@ -423,7 +419,7 @@ the blocklists. An abuser that trips none of them is not caught.
 
 Some legitimate clients pass the limits:
 
-- An Actions runner asks gitea for work all day and can pass the limits.
+- A CI runner asks its code forge for work all day and can pass the limits.
 - Everyone behind one shared address, such as an office, shares one client's
   limits.
 
@@ -556,12 +552,11 @@ service's abuse comes from.
 By default the Core Rule Set reads the method, the URL with its query string,
 and the headers of every request. That is where automated attacks show:
 injection in query strings, path traversal, attacks carried in headers,
-scanners' user agents. It reads no request body. In front of a code forge such
-as gitea, bodies carry what people write and publish, such as issue text and
-files saved in the web editor. The Core Rule Set takes the shell commands and
-code in them for attacks. The default gives up refusing an attack carried in a
-body. The rule files, the limits and the bans still apply to the client that
-sends it.
+scanners' user agents. It reads no request body. In front of a code forge,
+bodies carry what people write and publish, such as issue text and files saved
+in the web editor. The Core Rule Set takes the shell commands and code in them
+for attacks. The default gives up refusing an attack carried in a body. The rule
+files, the limits and the bans still apply to the client that sends it.
 
 - The Core Rule Set skips a path under `SWWAF_WAF_EXEMPT_PATHS`.
 - `SWWAF_WAF_PARANOIA_LEVEL` and `SWWAF_WAF_ANOMALY_THRESHOLD` are the Core Rule
@@ -589,6 +584,27 @@ sends it.
     probes these rules caught (see "Rule files"). A list you give replaces the
     default, so name these six ids in it to keep them off.
 
+- `SWWAF_CORE_RULE_SET_EXCLUSIONS_FILE` names a file of exclusions, written as
+  Coraza directives. An exclusion switches one rule off for some fields or paths
+  only, where `SWWAF_WAF_DISABLED_RULES` switches it off everywhere. The file
+  holds an app's own exclusions; the eighth change below holds gitea's.
+    - `servewaf` loads the file after `smallwebwaf`'s own setup rules and before
+      the Core Rule Set's rules. The Core Rule Set loads its own
+      `REQUEST-900-EXCLUSION-RULES-BEFORE-CRS.conf` at the same point.
+    - So the file holds only `SecAction` and `SecRule` lines that exclude with
+      `ctl:ruleRemoveTargetById` or `ctl:ruleRemoveById`. These run with each
+      request, before the rules they exclude, those of phase 1 included.
+    - A rule that `SWWAF_WAF_DISABLED_RULES` switches off and the file names is
+      simply off.
+    - The start stops on a file that cannot be read or does not parse, whatever
+      `SWWAF_WAF_MODE` is.
+    - It stops too on a file that names a number from 900000 to 900999, the ids
+      of `smallwebwaf`'s own rules, alone or in a range. Comment lines are not
+      checked.
+    - It stops too on a directive that removes or changes rules as the file
+      loads, such as `SecRuleRemoveById`, since none of the Core Rule Set's
+      rules is loaded yet.
+
 - `SWWAF_WAF_BODY_LIMIT` switches body inspection on, up to that size. It takes
   at most `64K`, since `servewaf` gets no more of a body than that (see "The
   answer"). Form data and multipart bodies are read up to the size. JSON and XML
@@ -597,15 +613,14 @@ sends it.
   data, where binary content such as a git push trips rules written for text. A
   body the Core Rule Set cannot parse adds 5 to the score, and so does a
   multipart body cut by the limit in the middle of a part's header. Body
-  inspection suits apps whose forms carry no code; `docs/gitea.md` records what
-  it refuses in front of gitea.
+  inspection suits apps whose forms carry no code.
 - `SWWAF_TRAP_PATHS` names paths the app never serves and only scanners ask for,
-  such as `/wp-login.php` in front of gitea. This is the short form of a `path`
-  rule with the `ban` action, for deployments that mount no rule files. A trap
-  path is matched whole, without the query, against the path as sent and once
-  percent-decoded: `/wp-login.php` matches `/wp-login.php?x=1` and
-  `/%77p-login.php`, and does not match `/wp-login.php/` or
-  `/blog/wp-login.php`.
+  such as `/wp-login.php` in front of an app that is not WordPress. This is the
+  short form of a `path` rule with the `ban` action, for deployments that mount
+  no rule files. A trap path is matched whole, without the query, against the
+  path as sent and once percent-decoded: `/wp-login.php` matches
+  `/wp-login.php?x=1` and `/%77p-login.php`, and does not match `/wp-login.php/`
+  or `/blog/wp-login.php`.
 - `SWWAF_ERROR_BURST_THRESHOLD` counts a client's refusals per minute of these
   kinds, and of no other:
     - a rule file match;
@@ -615,10 +630,10 @@ sends it.
     More than this breaks a limit (see "Bans"). A client trying one attack after
     another is refused many times a minute; a person rarely more than a few
     times. Answers the app gives are not counted, since they do not tell a
-    scanner from an ordinary client. In front of gitea, registry and git clients
-    get `404` and `401` by design, hundreds of times a minute.
+    scanner from an ordinary client. In front of a code forge, registry and git
+    clients get `404` and `401` by design, hundreds of times a minute.
 
-`smallwebwaf` changes the Core Rule Set 4.25.0 in six ways, since in front of
+`smallwebwaf` changes the Core Rule Set 4.25.0 in eight ways, since in front of
 gitea it would otherwise refuse ordinary requests. The changes hold in front of
 every app, and no setting undoes them:
 
@@ -650,9 +665,10 @@ every app, and no setting undoes them:
     or `docker-build`. In these parameters, what only these three rules would
     catch reaches the app, such as the command `|cat /etc/passwd`. Path
     traversal, SQL and script injection, and PHP, Java and Node.js code are
-    still refused there. Every other parameter keeps all three rules. An app
-    that uses one of these parameters as a file on the server, or passes it to a
-    shell, must check the value itself. A rule file can refuse it instead.
+    still refused there. Other parameters keep all three rules, except on the
+    gitea paths the eighth change names. An app that uses one of these
+    parameters as a file on the server, or passes it to a shell, must check the
+    value itself. A rule file can refuse it instead.
 
 5. Two cookies are left out, and `Referer` keeps fewer rules:
     - The Core Rule Set reads the request without the `gitea_flash` and
@@ -666,15 +682,79 @@ every app, and no setting undoes them:
       only to its own pages. Every other cookie is read in full. An app that
       reads a cookie of either name must check it itself.
     - `Referer` is not checked for a Unix command given without arguments
-      (932340) or for Java starting a process (944110). `Referer` names the page
-      a request comes from, on everything that page loads and on every link
-      followed from it. The Core Rule Set takes some page addresses for attacks,
-      such as a search for `env`, or OpenJDK's `Runtime.java`, whose path holds
-      both `runtime` and `java.`. All of those requests would be refused.
-      `Referer` keeps the other rules. An app that passes `Referer` to a shell
-      must check it itself.
+      (932340), for Java starting a process (944110) or for a Java class name
+      (944130). `Referer` names the page a request comes from, on everything
+      that page loads and on every link followed from it. The Core Rule Set
+      takes some page addresses for attacks:
+        - a search for `env`;
+        - OpenJDK's `Runtime.java`, whose path holds both `runtime` and `java.`;
+        - a file named `java.lang.String.md`.
+
+        Every request from such a page would be refused. `Referer` keeps the
+        other rules, except after some gitea searches (the eighth change). An
+        app that passes `Referer` to a shell must check it itself.
+
 6. Responses are not inspected. A raw file from a repository, such as a shell
    script, looks to the response rules like source code leaking from the server.
+7. The `from` parameter of a container registry's upload path,
+   `/v2/<image>/blobs/uploads/`, is not checked for command names (932260). When
+   a push reuses a layer, `from` names the image the layer comes from. An image
+   such as `owner/python3-app` would have that push refused.
+8. On gitea's paths, some fields skip the rules that refused ordinary gitea
+   requests there. They are the fields where gitea sends a search, a file name
+   or a branch name. `internal/waf/gitea.conf` lists each rule and the request
+   it refused. The fields are:
+    - `q` on gitea's searches of code, of issues and pull requests, and of
+      commits. A code search holds code, such as `<script>`,
+      `SELECT * FROM users WHERE` or `../`.
+    - `Referer` of a page opened from such a search, for script and SQL
+      injection and Java code (941110, 941120, 941160, 942100, 944100).
+    - `q` on gitea's searches for a name, for the names of system files and
+      commands (930120, 932120, 932260). Names such as `.profile` and
+      `python3-app` were refused. gitea searches for the names of:
+        - repositories;
+        - users and organisations;
+        - branches and tags;
+        - packages.
+
+        Some of these searches also skip the rule for Java class names (944130),
+        which refused `org.apache.commons.logging`.
+
+    - The path of these requests, which names a file:
+        - a file's page;
+        - its raw file;
+        - its download;
+        - its blame page;
+        - its history;
+        - its edit page;
+        - its preview in the editor;
+        - its delete page;
+        - the API's call for its contents;
+        - a release attachment's download.
+
+        Names such as `notes.txt~`, `process.env.d.ts` and `java.lang.String.md`
+        were refused.
+
+    - A file name in a query parameter:
+        - `file` of a commit graph;
+        - `path` of the API's list of commits;
+        - `path` of a diff's hidden lines;
+        - `body` of the API's call for several files;
+        - `template` of a new issue;
+        - `redirect_to` of the sign-in page;
+        - `name` of an attachment uploaded through the API.
+    - A branch or tag name in a query parameter, for command names (932260).
+      gitea sends one:
+        - to delete or restore a branch;
+        - to start a release from a tag;
+        - to edit a branch protection rule;
+        - to list a directory's last commits.
+    - The `Content-Range` header of an artifact upload from
+      `actions/upload-artifact@v3` (920450).
+
+    Elsewhere these fields keep every rule. The paths are those of gitea at the
+    site root. An app other than gitea that serves one of them must check these
+    fields itself.
 
 The parameter and cookie names in these changes are matched without regard to
 case, as Coraza matches them.
@@ -842,7 +922,7 @@ and the default file.
   runs. It reads the files again once the directory has had no change for 2
   seconds, so that a file still being written is read whole. A file whose name
   starts with `.`, such as an editor's lock file, is not a rule file.
-- Files are read in name order (`00-default.rules` before `50-gitea.rules`),
+- Files are read in name order (`00-default.rules` before `50-site.rules`),
   rules in line order.
 - A rule's regex is Go's RE2 syntax. It has no backreferences or lookaround; in
   exchange matching time is linear in the input, so no rule can be made to stall
@@ -871,14 +951,12 @@ and the default file.
 
 - The image ships a default file, kept short and limited to patterns that are
   wrong for every app, with its path rules anchored at the site root. In front
-  of gitea, `/.env` is a probe, while
+  of a code forge, `/.env` is a probe, while
   `/<owner>/<repo>/src/branch/main/.env.example` is a file in a repository that
   any visitor may open. Anchor the paths of your own `ban` rules at the site
-  root too. Anything else, such as a rule banning WordPress probes in front of
-  gitea, belongs in a file the deployer adds to the image `servewaf` runs from,
-  or mounts. A rule has one target, so a `path` rule applies on every site
-  behind that `servewaf`. A directory mounted over `SWWAF_RULES_DIR` replaces
-  the default file; single files mounted into it add to it.
+  root too. A rule has one target, so a `path` rule applies on every site behind
+  that `servewaf`. A directory mounted over `SWWAF_RULES_DIR` replaces the
+  default file; single files mounted into it add to it.
 - Rules meant to be edited while `servewaf` runs belong in a mounted directory,
   not a mounted file. Many editors save a file by replacing it, and a container
   keeps seeing the old one when the file alone is mounted. The lookup database
@@ -1701,8 +1779,7 @@ with no change to upaas. upaas builds the app's Dockerfile and runs the one
 container as it runs any app. The traefik labels route to port 8080, and the
 `SWRP_` settings go with the app's environment variables. `servewaf` runs in a
 container of its own, on a network the app's container can reach, with its state
-volume and the directory of any token file. `docs/gitea.md` records what the
-defaults do in front of gitea, and `script/gitea-requests` checks those notes.
+volume and the directory of any token file.
 
 ## Planned, not built
 

deploy/gitea/compose.yaml

@@ -1,135 +0,0 @@
-# Gitea behind traefik, with rproxy and servewaf in front of it.
-# docs/gitea.md says what each setting here does and why. Before starting it:
-#   - set SMALLWEBWAF_IMAGE to the smallwebwaf image, named by digest;
-#   - replace git.example.org with the site's host name;
-#   - replace each 10.99.0 with the first three numbers of a /24 subnet that
-#     no other network on the host uses. The /24 must lie inside 10.0.0.0/8,
-#     172.16.0.0/12 or 192.168.0.0/16, because rproxy believes
-#     X-Forwarded-For only from those by default. Replace each fd10:99 with
-#     the first two hextets of an unused /64 subnet whose third and fourth
-#     hextets are 0, as in fd10:99::/64;
-#   - set GITEA_SECRET_KEY to the output of
-#     `docker run --rm <gitea's image below> gitea generate secret SECRET_KEY`,
-#     once per install, and keep it.
-# Then run `docker compose up --detach` in this directory.
-# script/gitea-setup checks this setup.
-
-name: gitea
-
-x-logging: &logging
-    driver: json-file
-    options:
-        max-size: 10m
-        max-file: "5"
-
-services:
-    traefik:
-        # traefik v3.7.17, 2026-11-03
-        image: traefik@sha256:68ae5fe5b64ca166704b746a9e8afcd385e36b3f569a5691401bf652d57b3748
-        # traefik replaces the X-Forwarded-For header a visitor sends. Keep it
-        # so: otherwise a visitor could name an address on the shared network,
-        # and skip servewaf's checks.
-        command:
-            - --providers.docker.exposedbydefault=false
-            - --entrypoints.web.address=:80
-            - --entrypoints.web.http.redirections.entrypoint.to=websecure
-            - --entrypoints.websecure.address=:443
-            # Until a certificate resolver is added here, as for your other
-            # sites, traefik answers with a certificate it made itself.
-            - --entrypoints.websecure.http.tls=true
-            # traefik's own limit of 60 seconds for a whole request would cut
-            # off an upload long before rproxy's limit of 30 minutes.
-            - --entrypoints.websecure.transport.respondingTimeouts.readTimeout=30m
-        ports:
-            - 80:80
-            - 443:443
-        volumes:
-            - /var/run/docker.sock:/var/run/docker.sock:ro
-        networks:
-            shared:
-                # Containers on the shared network find traefik under the
-                # site's name, and so reach it from their own address.
-                aliases:
-                    - git.example.org
-        restart: unless-stopped
-
-    gitea:
-        # gitea 1.27.3, 2026-08-29
-        image: gitea/gitea@sha256:87a67ee09d3ae0d1df5fda5dcda3e2a1f9236a45b0a59025d6e00e46adc43bef
-        environment:
-            GITEA__server__ROOT_URL: https://git.example.org/
-            # Gitea starts at its defaults, with SQLite, instead of showing its
-            # install page to whoever opens it first.
-            GITEA__security__INSTALL_LOCK: "true"
-            GITEA__security__SECRET_KEY: ${GITEA_SECRET_KEY:?set GITEA_SECRET_KEY, see docs/gitea.md}
-            # Accounts are made with `gitea admin user create`.
-            GITEA__service__DISABLE_REGISTRATION: "true"
-            # rproxy's addresses. Gitea then takes each visitor's address from
-            # the X-Real-Ip header traefik sets and rproxy passes on.
-            GITEA__security__REVERSE_PROXY_TRUSTED_PROXIES: 10.99.0.2,fd10:99::2
-        volumes:
-            - gitea-data:/data
-        networks:
-            - shared
-        restart: unless-stopped
-
-    rproxy:
-        image: ${SMALLWEBWAF_IMAGE:?set SMALLWEBWAF_IMAGE to the smallwebwaf image}
-        environment:
-            SWRP_WAF_BACKEND: http://servewaf:8080
-            SWRP_UPSTREAM_URL: http://gitea:3000
-            # Pushes, LFS objects, packages and release attachments of up to
-            # 2 GiB, sent in up to 30 minutes.
-            SWRP_MAX_REQUEST_SIZE: 2G
-            SWRP_MAX_REQUEST_TIME_MS: "1800000"
-            # 15 minutes for a clone or a download, half the default.
-            SWRP_MAX_RESPONSE_TIME_MS: "900000"
-        labels:
-            traefik.enable: "true"
-            traefik.http.routers.gitea.rule: Host(`git.example.org`)
-            traefik.http.routers.gitea.entrypoints: websecure
-            traefik.http.services.gitea.loadbalancer.server.port: "8080"
-        networks:
-            shared:
-                ipv4_address: 10.99.0.2
-                ipv6_address: fd10:99::2
-        logging: *logging
-        restart: unless-stopped
-
-    servewaf:
-        image: ${SMALLWEBWAF_IMAGE:?set SMALLWEBWAF_IMAGE to the smallwebwaf image}
-        environment:
-            SMALLWEBWAF_COMMAND: servewaf
-            # The containers on the shared network skip the checks. Add the
-            # address of an automation fleet on another host here too; without
-            # that, it is counted like any client.
-            SWWAF_ALLOW_NETS: 10.99.0.128/25,fd10:99:0:0:8000::/65
-            # In block mode the Core Rule Set refuses everyday Gitea searches
-            # and file names, and 31 refusals in a minute ban the address.
-            SWWAF_WAF_MODE: detect
-        volumes:
-            - servewaf-state:/var/lib/smallwebwaf
-        networks:
-            - shared
-        logging: *logging
-        restart: unless-stopped
-
-networks:
-    # The network traefik and Gitea share. Its containers get addresses in the
-    # upper half of each subnet, which servewaf lets skip the checks. Each
-    # subnet's gateway, the host's own address on it, stays out of that half:
-    # requests docker passes on from a published port can come from it.
-    shared:
-        enable_ipv6: true
-        ipam:
-            config:
-                - subnet: 10.99.0.0/24
-                  ip_range: 10.99.0.128/25
-                  gateway: 10.99.0.1
-                - subnet: fd10:99::/64
-                  ip_range: fd10:99:0:0:8000::/65
-                  gateway: fd10:99::1
-
-volumes:
-    gitea-data:
-    servewaf-state:

docs/gitea.md

@@ -1,340 +0,0 @@
-# smallwebwaf in front of gitea
-
-`deploy/gitea/compose.yaml` runs gitea behind traefik, with `rproxy` and
-`servewaf` in front of it. This document says what that setup sets and why, and
-what the defaults would do without it. [`SPEC.md`](../SPEC.md) says how
-`smallwebwaf` behaves.
-
-## The setup
-
-Four containers share one Docker network, the shared network:
-
-- traefik, which routes the site's HTTPS requests to `rproxy`, and redirects
-  plain HTTP to HTTPS;
-- `rproxy`, in front of gitea;
-- gitea 1.27.3, as its image comes;
-- `servewaf`, with a volume for its state files.
-
-To start it:
-
-1. In `deploy/gitea/compose.yaml`, replace `git.example.org` with the site's
-   host name.
-2. Replace each `10.99.0` with the first three numbers of a `/24` subnet that no
-   other network on the host uses. The `/24` must lie inside `10.0.0.0/8`,
-   `172.16.0.0/12` or `192.168.0.0/16`, because `rproxy` believes
-   `X-Forwarded-For` only from those by default. Replace each `fd10:99` with the
-   first two hextets of an unused `/64` subnet whose third and fourth hextets
-   are 0, as in `fd10:99::/64`.
-3. Set `SMALLWEBWAF_IMAGE` to the `smallwebwaf` image, named by digest.
-4. Set `GITEA_SECRET_KEY` to the output of
-   `docker run --rm <gitea's image> gitea generate secret SECRET_KEY`, with
-   gitea's image as `deploy/gitea/compose.yaml` names it. Do this once per
-   install, and keep the key.
-5. Run `docker compose up --detach` in `deploy/gitea`.
-6. Make gitea's first user with `gitea admin user create`, in gitea's container,
-   as the user `git`.
-
-Sign-up is off: accounts are made with `gitea admin user create`. gitea starts
-at its defaults, with SQLite. traefik answers with a certificate it made itself
-until you add a certificate resolver, as for your other sites. SSH to gitea does
-not pass through `smallwebwaf`; publish gitea's SSH port yourself if you use it.
-
-`make gitea-setup` checks the setup. It builds the image, brings the setup up
-under a name of its own, and checks:
-
-- that a page load, a push and a clone sent through traefik pass through
-  `rproxy`, and that `servewaf` checks them;
-- that gitea logs the visitor's address, not `rproxy`'s;
-- that a request from a container on the shared network skips the checks;
-- that with `servewaf` stopped, gitea still answers through `rproxy`.
-
-## Uploads and downloads
-
-An upload is a request:
-
-- a git push;
-- an LFS object;
-- a container image layer;
-- a package file;
-- a release attachment.
-
-The setup lets an upload of up to 2 GiB, sent in up to 30 minutes, through:
-
-- `SWRP_MAX_REQUEST_SIZE` is `2G`. At the default, an upload over 100 MiB is cut
-  off.
-- `SWRP_MAX_REQUEST_TIME_MS` is `1800000`, 30 minutes. At the default, an upload
-  that takes over 60 seconds is cut off.
-- traefik's `readTimeout` is 30 minutes. traefik's own default of 60 seconds for
-  a whole request would cut off an upload first.
-
-A clone or a download is a response:
-
-- `SWRP_MAX_RESPONSE_TIME_MS` is `900000`, 15 minutes, half the default. A clone
-  or download that takes longer is cut off.
-- `SWRP_MAX_RESPONSE_SIZE` stays at its default, 1 GiB. A repository whose clone
-  is larger needs it raised.
-
-The byte limits stay at their defaults: no minute limit, 50 GiB an hour and 100
-GiB a day.
-
-## The checks
-
-`SWWAF_WAF_MODE` is `detect`. The Core Rule Set then logs a match, with its rule
-ids, and refuses nothing. In `block` mode, the default, it refuses everyday
-gitea searches and file names. The section "What the Core Rule Set refuses in
-`block` mode" below lists them. Each such refusal counts toward the error burst,
-so 31 in one minute ban the address.
-
-Every other check stays at its default. A client may make 120 requests a minute,
-1,500 an hour and 6,000 a day. Archive downloads and blame and history pages are
-what scrapers hammer, and these limits do most of the work there.
-
-## The shared network
-
-Containers on the shared network skip `servewaf`'s checks:
-
-- The shared network's subnets are `10.99.0.0/24` and `fd10:99::/64`. Docker
-  gives its containers addresses in the upper half of each, `10.99.0.128/25` and
-  `fd10:99:0:0:8000::/65`, which `SWWAF_ALLOW_NETS` names.
-- traefik is known on the shared network by the site's host name. So a container
-  there that asks for the site reaches traefik from its own address. An
-  automation fleet in such a container skips the checks.
-- Each subnet's gateway, `10.99.0.1` and `fd10:99::1`, is the host's own address
-  on it. Requests docker passes on from a published port can come from the
-  gateway, so the gateways are left out of `SWWAF_ALLOW_NETS`. The network has
-  IPv6, so a visitor over IPv6 reaches traefik from its own address, and
-  `servewaf` checks it as itself.
-- A container on the shared network that asks for the site at the host's public
-  address arrives from the gateway. It is checked like any visitor.
-- A fleet on another host can have its address added to `SWWAF_ALLOW_NETS`.
-  Without that, it is counted like any client.
-- traefik replaces the `X-Forwarded-For` a visitor sends, by default. Keep it
-  so: otherwise a visitor could name an address on the shared network, and skip
-  the checks.
-- Anything on the shared network can reach gitea and `servewaf` around `rproxy`.
-  Put only containers you trust on it.
-
-## gitea's settings
-
-- `REVERSE_PROXY_TRUSTED_PROXIES` names `rproxy`'s fixed addresses, `10.99.0.2`
-  and `fd10:99::2`. gitea then takes each visitor's address from the `X-Real-Ip`
-  header, which traefik sets and `rproxy` passes on. Without it, gitea logs
-  every visitor as `rproxy`.
-- `INSTALL_LOCK` is `true`, as "The setup" above says.
-
-## Methods
-
-`rproxy` passes on only these methods: `GET`, `HEAD`, `POST`, `OPTIONS`, `PUT`,
-`DELETE`, `PATCH` and `QUERY`. gitea 1.27.3 needs no other. Its routes use:
-
-- pages and the API: `GET`, `HEAD`, `POST`, `PUT`, `PATCH` and `DELETE`;
-- git's push, clone and fetch over HTTP: `GET`, `POST` and `OPTIONS`;
-- LFS: `GET`, `POST` and `PUT`;
-- the container registry and the other package registries: `GET`, `HEAD`,
-  `POST`, `PUT`, `PATCH` and `DELETE`;
-- Actions runners: `POST`.
-
-## The log
-
-`rproxy` and `servewaf` write each query string to the log whole. A token sent
-in the query string, as `?token=`, is then in the log. Send it in the
-`Authorization` header instead.
-
-## Actions runners
-
-A runner on the shared network skips the checks. One on another host is counted
-like any client. A runner older than version 0.4 (April 2026) asks for work
-every 2 seconds, 1,800 requests an hour. While it runs a job, it reports the
-job's log and state every second instead, two requests a second.
-
-So one idle runner makes 1,800 requests an hour, more than the hour limit of
-1,500. A busy one, at two requests a second, passes the minute limit of 120
-within two minutes. Its address is then banned, its running jobs fail, and each
-repeat within a day makes the ban longer. Newer runners ask for work less often.
-Put the runners' addresses in `SWWAF_RATE_LIMIT_EXEMPT_NETS`.
-
-## What the Core Rule Set refuses in `block` mode
-
-These notes record what the Core Rule Set does in front of gitea in `block`
-mode, at the other defaults. They are observations, not requirements.
-`script/gitea-requests` runs gitea behind `rproxy` and `servewaf` at the
-defaults. It sends through them a sample of gitea's ordinary use and the
-requests named below. It reports each request the Core Rule Set refuses, so that
-these notes can be checked again when gitea or the Core Rule Set changes
-version. In `detect` mode, as the setup runs it, the same requests are logged
-with their rule ids, and pass.
-
-Each refusal answers only that request ("Bans" in `SPEC.md` says what it counts
-toward). The request log names the rule in `waf_rule_ids`, which
-`SWWAF_WAF_DISABLED_RULES` can switch off.
-
-### What it lets through
-
-The Core Rule Set lets gitea's ordinary use through, apart from the refusals in
-the sections after this one:
-
-- browsing and views of files in a repository, with their history, blame and the
-  file tree;
-- diffs, including their hidden lines and large files, and pull request review;
-- git's clone, fetch and push over HTTP;
-- signing in, including the return to the page a visitor came from, and sign-in
-  with Git Credential Manager, git-credential-oauth or tea;
-- the API's calls for a file and its commits;
-- pushing and pulling container images and packages;
-- Actions runners, and artifacts uploaded with `actions/upload-artifact@v4`;
-- posting issues, pull requests, comments, wiki pages and files saved in the web
-  editor, code included, since no body is read;
-- the page gitea shows after a change, with its message naming what was done.
-
-### A query string that reads as an attack
-
-Most often this is a search. A search term is a query parameter, which the Core
-Rule Set checks against its lists of system files and commands (see the fourth
-change under "Attack detection" in `SPEC.md`). A release attachment uploaded
-through the API as `docker-compose.yml` is refused the same way. Examples:
-
-- a name on those lists, such as `package.json`, `.gitignore` or
-  `docker-compose.yml`;
-- text that starts with a command name, such as `python3` or `ssh key`, or has
-  one right after a `/` in its first word, such as `feat/docker-support`;
-- a shell command with its options or a system path (`ls -la`, `sed -i`,
-  `/bin/sh`), or a command in backticks;
-- script code (`fetch(`, `${VAR}`, `process.env`), HTML (`<img src=`) or an SQL
-  statement (`SELECT * FROM users WHERE`);
-- a URL naming an IP address or `localhost`.
-
-### A branch, tag or file name that starts with a command name
-
-The Core Rule Set's list of commands (932260) holds names such as `docker-`,
-`python3`, `ansible`, `base64` and `whoami`. A query parameter holding a branch,
-tag or file name that starts with one is refused. So is one that has such a name
-right after a `/`, such as `feat/docker-support`, `fix/docker-build` or
-`renovate/docker-build-push-action-6.x`. gitea's own pages send the name in a
-query parameter that 930120, 932160 and 932260 still check:
-
-- `refSubUrl`, the branch or tag of a directory listing. A listing sends it when
-  it asks for its entries' last commits in a second request. It does so whenever
-  gitea takes more than a second to work them out;
-- `name`, when a branch is deleted or restored on the branches page;
-- `tag`, when a release is started from a tag;
-- `template`, the file of an issue template, when an issue is opened from it;
-- `rule_name`, when a branch protection rule is opened for editing in the
-  repository's settings or has just been saved.
-
-What a visitor sees, for a branch named `docker-build`:
-
-- A directory listing that makes that second request leaves those last commits
-  out and shows an error.
-- The branches page shows an error instead of deleting or restoring the branch.
-- A release started from such a tag gets the `403` answer of `smallwebwaf` in
-  place of its form. So does an issue opened from such a template, and such a
-  rule opened for editing.
-- Saving such a rule stores it. gitea then returns to the branch settings page,
-  which gets the `403` answer, so the save looks as if it failed.
-
-### A file name in a query parameter that trips the code rules
-
-The Core Rule Set's rules for Java, script, PowerShell and SQL find what they
-look for in some file names. This holds too in the ten query parameters that
-930120, 932160 and 932260 do not check (see the fourth change under "Attack
-detection" in `SPEC.md`). Examples:
-
-- `runtime` in OpenJDK's `src/java.base/share/classes/java/lang/Runtime.java`
-  (944110);
-- a Java class, as in `java.lang.String.md` (944130);
-- `document.write.js` (941180);
-- `process.env.d.ts` (934100);
-- `__proto__` (934130);
-- the PowerShell command `Install-Script`, as in `install-script.sh` (932120);
-- a database's name, as in PostgreSQL's `information_schema.sql` (942140).
-
-For such a file, these requests are refused:
-
-- the API's list of its commits (`path`);
-- the API's call for the contents of files that names it in its query (`body`);
-- the commit graph of that file alone (`file`);
-- the hidden lines of its diff (`path`), which stay hidden;
-- the sign-in page, for a visitor who opens a page of the file that needs
-  signing in, such as its edit page (`redirect_to`). The visitor can still sign
-  in by opening the sign-in page itself.
-
-### A path
-
-- A file name ending in `~`, or an `.xhtml` file whose path holds a space.
-- A path that holds what the Core Rule Set takes for a Java class (944130), as
-  `java.lang.String.md` and
-  `META-INF/services/org.apache.commons.logging.LogFactory` do.
-- A path that holds what it takes for Node.js code (934100), as
-  `process.env.d.ts` does.
-- A path with a directory named `...` (930100, 930110), such as `.../notes.txt`.
-
-For such a file, these are refused:
-
-- the page of the file;
-- its raw file;
-- its history and its blame;
-- its edit page.
-
-The directory that holds it lists it, and a clone carries it.
-
-### A container image push that reuses a layer
-
-A push can reuse a layer of an image docker has pushed to that gitea before.
-docker then asks gitea to take the layer from that image, naming it in the query
-parameter `from`, which 932260 checks. The request is refused when the image's
-owner starts with an entry on the list of commands. It is refused too when the
-image's name after the owner starts with one. Examples are `owner/python3-app`,
-`owner/docker-base`, and any image of an owner named `ansible` or `docker-team`.
-
-What happens next depends on docker's image store. A docker that keeps its
-images in containerd's image store fails the push, and fails each new try the
-same way. A new install of Docker Engine 29 does this. A docker that keeps them
-in its own older image store uploads the layer instead. The push then succeeds
-after one refusal for each layer it reuses, and each of those refusals counts
-toward the error burst ("Attack detection" in `SPEC.md`).
-
-### Artifact uploads from `actions/upload-artifact@v3`
-
-This action sends the header `Content-Range`, which the Core Rule Set refuses
-(920450). The action sends two files at a time, does not retry a `403`, and
-sends no further file once one is refused. So an upload is refused once or
-twice, however many files it holds, and the step fails. One upload does not ban
-the runner. The error burst ("Attack detection" in `SPEC.md`) bans it after more
-than 30 such refusals from its address in a minute, as when many jobs upload at
-once. `actions/upload-artifact@v4` does not send the header.
-
-### What body inspection refuses
-
-With `SWWAF_WAF_BODY_LIMIT` set, the Core Rule Set reads request bodies too. In
-front of gitea it then refuses these, until their rule ids, named in the request
-log, are added to `SWWAF_WAF_DISABLED_RULES`:
-
-- issue and comment text, wiki pages and files saved in the web editor that hold
-  shell commands or code (932125, 932235, 932250 and others);
-- package descriptions that show code;
-- PyPI uploads (922130);
-- attachments named like `debug.log` or `config.yml` (932180).
-
-### What `script/gitea-requests` sends
-
-Of the requests above, the script sends:
-
-- for each file named under "A file name in a query parameter that trips the
-  code rules", the API's list of its commits;
-- for `Runtime.java` alone, the commit graph of that file, the hidden lines of
-  its diff, and the API's call for the contents of files that names it;
-- the sign-in page for a visitor who opens the edit page of `document.write.js`;
-- the pages of `java.lang.String.md`,
-  `META-INF/services/org.apache.commons.logging.LogFactory`, `process.env.d.ts`
-  and `.../notes.txt`;
-- one container image push that reuses a layer, which it does not try again.
-
-It does not send the raw file, history, blame or edit page of those four files,
-or the pages of the directories `META-INF/services` and `...`. It also sends a
-short sample of gitea's ordinary use:
-
-- signing in;
-- pages of files and commits, and a diff;
-- the API;
-- a push, and clone and fetch over HTTP;
-- two container image pushes.

docs/request-log.md

@@ -107,35 +107,6 @@ Every one of these lines has:
 - `would_action`: in `observe` mode, what `enforce` mode would have done with a
   request it would have refused. `action` then names what was done, normally
   `forward`.
-- `heuristic`: the heuristic that refused the request, in `observe` mode too. It
-  is left out when none did.
-- `heuristic_figures`: an object of the figures that heuristic acted on. Each
-  heuristic and its figures:
-    - `deny_nets`: `netblock`, the entry of `SWWAF_DENY_NETS` the client is in;
-    - `active_ban`: `netblock`, the ban's netblock, and `ban_expires`;
-    - `countries`: `country`, and `setting`, the country list that refused it;
-    - `blocklists`: `lists`, the blocklist URLs that list the client;
-    - `crowdsec`: `scenario`, the decision's scenario, and `expires`, when the
-      decision ends;
-    - `dnsbl`: `zones`, the DNS blocklist zones that list the client, their keys
-      masked;
-    - `abuseipdb`: `score`, and `min_score`, `SWWAF_ABUSEIPDB_MIN_SCORE`;
-    - `rate_limits`: `window`, `count` and `limit`;
-    - `trap_paths`: `path`, the trap path asked for;
-    - `rule_files`: `rule_id` and `rule_action`, of the rule that refused it;
-    - `header_limits`: `fields`, `fields_limit`, `cookies` and `cookies_limit`;
-    - `core_rule_set`: `score`, and `threshold`, `SWWAF_WAF_ANOMALY_THRESHOLD`;
-    - `refusal_limit`: `window`, `count` and `limit`, of the error burst;
-    - `byte_limits`: `window`, `count` and `limit`, the count in bytes.
-- `after_answer_heuristic`: the heuristic that banned the client after
-  `servewaf` answered the request, in `observe` mode too: `refusal_limit` or
-  `byte_limits`.
-- `after_answer_heuristic_figures`: an object of the figures that heuristic
-  acted on, as listed above.
-
-    `byte_limits` bans when the report comes, so only the `report` line names
-    it.
-
 - `limit_percent` and `limit_percent_setting`: the client's percentage of the
   rate limits and the setting that lowered it, when one did. `bytes_percent` and
   `bytes_percent_setting` do the same for the byte limits.

docs/rules.md

@@ -55,10 +55,10 @@ empty-agent      user_agent  log     ^$
 ## A file of your own
 
 `servewaf` reads the rule files in its own container. Rules of your own go in a
-file named to sort after the default, such as `50-gitea.rules`:
+file named to sort after the default, such as `50-site.rules`:
 
 ```
-# 50-gitea.rules: WordPress probes, which gitea never serves
+# 50-site.rules: WordPress probes, which this site never serves
 wp-probe         path        ban     (?i)^/(wp-login\.php|xmlrpc\.php|wp-admin/)
 ```
 
@@ -66,7 +66,7 @@ A `Dockerfile` built on the `smallwebwaf` image, for `servewaf` to run from,
 adds it:
 
 ```dockerfile
-COPY 50-gitea.rules /etc/smallwebwaf/rules.d/50-gitea.rules
+COPY 50-site.rules /etc/smallwebwaf/rules.d/50-site.rules
 ```
 
 Or mount it there. A `path` rule applies on every site behind that `servewaf`.

docs/settings.md

@@ -101,19 +101,18 @@ chooses between the two (see "The image's command" below).
 
 - `SWWAF_RATE_LIMIT_PER_MINUTE` (default `120`, 2 a second): the most requests a
   client may make in a minute. A count or `off`. The default leaves room for a
-  person opening two gitea pages at once with an empty cache, up to 60 files
-  each.
+  person opening two pages at once with an empty cache, up to 60 files each.
 - `SWWAF_RATE_LIMIT_PER_HOUR` (default `1500`): the most requests a client may
   make in an hour. A count or `off`. It is the main limit against scrapers. A
-  person reading code in gitea for an hour, a page every 20 seconds, makes
-  about 900. A scraper making one request every 2 seconds makes 1,800 an hour,
-  more than the limit.
+  person reading a site for an hour, a page every 20 seconds, makes about 900. A
+  scraper making one request every 2 seconds makes 1,800 an hour, more than the
+  limit.
 - `SWWAF_RATE_LIMIT_PER_DAY` (default `6000`): the most requests a client may
   make in a day. A count or `off`. The default is four hours at the hour limit.
   A scraper making one request every 10 seconds makes 8,640 a day, more than the
   limit.
-- An Actions runner asks gitea for work all day and can pass the limits. Put the
-  runners' addresses in `SWWAF_RATE_LIMIT_EXEMPT_NETS`. Do the same for a
+- A CI runner asks its code forge for work all day and can pass the limits. Put
+  the runners' addresses in `SWWAF_RATE_LIMIT_EXEMPT_NETS`. Do the same for a
   network where many people share one address, such as an office.
 - Counting cannot catch a client that stays under all three limits (see "Request
   rate limits, per client" in [`SPEC.md`](../SPEC.md)).
@@ -192,6 +191,15 @@ chooses between the two (see "The image's command" below).
   the Core Rule Set reads, a size of at most `64K`. A question carries no more
   of a body than 64 KiB, and the Core Rule Set reads at most 64 KiB less one
   byte of it, whatever the value (see "The answer" in [`SPEC.md`](../SPEC.md)).
+- `SWWAF_CORE_RULE_SET_EXCLUSIONS_FILE` (default unset): a file of Core Rule Set
+  exclusions, written as Coraza directives. It is loaded before the Core Rule
+  Set's rules, so it holds only `SecAction` and `SecRule` lines that exclude
+  with `ctl:ruleRemoveTargetById` or `ctl:ruleRemoveById`. A file that cannot be
+  read or does not parse stops the start, whatever `SWWAF_WAF_MODE` is. So does
+  a file that names a number from 900000 to 900999 outside a comment, alone or
+  in a range. So does a directive that removes or changes rules as the file
+  loads, such as `SecRuleRemoveById`, since none of the Core Rule Set's rules is
+  loaded yet. It has no `_FILE` form.
 - `SWWAF_ERROR_BURST_THRESHOLD` (default `30`): the most refusals of one client
   in a minute (see "Attack detection" in `SPEC.md`). A count or `off`.
 

internal/alerts/alerts_test.go

@@ -39,7 +39,7 @@ const (
 	ntfyURL    = "https://ntfy.example/smallwebwaf-alerts"
 	ntfyToken  = "tk_0123456789abcdefghijklmnopq"
 	// instance is the instance name every alert gives.
-	instance = "fsn1app1/gitea"
+	instance = "fsn1app1/blog"
 	// started is when each test starts, as an alert gives it, and
 	// anHourOn an hour later.
 	started  = "2000-01-01T00:00:00Z"
@@ -965,8 +965,8 @@ func TestEachDestinationIsSentOnlyTheAlertsWaitingForIt(t *testing.T) {
 		synctest.Wait()
 
 		wantBodies(t, standIns[alerts.DestinationSlack],
-			`{"text":"*fsn1app1/gitea: file_error*\nsecond"}`,
-			`{"text":"*fsn1app1/gitea: file_error*\nthird"}`)
+			`{"text":"*fsn1app1/blog: file_error*\nsecond"}`,
+			`{"text":"*fsn1app1/blog: file_error*\nthird"}`)
 		wantBodies(t, standIns[alerts.DestinationNtfy], "fourth")
 
 		// alerts.json then lists Slack and ntfy alone, with no alert waiting.
@@ -1265,7 +1265,7 @@ func anAlertForEachEvent() []eventMessage {
 				Reason: "requests per hour over the limit of 10000",
 				Detail: map[string]any{"mode": "observe"},
 			},
-			"fsn1app1/gitea: ban", "default no_entry",
+			"fsn1app1/blog: ban", "default no_entry",
 			"requests per hour over the limit of 10000\nclient: 203.0.113.9\n" +
 				"netblock: 203.0.113.0/24\ncountry: DE\nmode: observe",
 		},
@@ -1275,7 +1275,7 @@ func anAlertForEachEvent() []eventMessage {
 				Netblock: netip.MustParsePrefix("198.51.100.7/32"), Country: "FR",
 				Reason: "matched the rule env-file",
 			},
-			"fsn1app1/gitea: permanent_ban", "high no_entry",
+			"fsn1app1/blog: permanent_ban", "high no_entry",
 			"matched the rule env-file\nclient: 198.51.100.7\n" +
 				"netblock: 198.51.100.7/32\ncountry: FR",
 		},
@@ -1286,7 +1286,7 @@ func anAlertForEachEvent() []eventMessage {
 				Reason:   "refused by the Core Rule Set",
 				Host:     "app.example",
 			},
-			"fsn1app1/gitea: waf_block", "default shield",
+			"fsn1app1/blog: waf_block", "default shield",
 			"refused by the Core Rule Set\nhost: app.example\nclient: 192.0.2.1\n" +
 				"netblock: 192.0.2.1/32",
 		},
@@ -1295,7 +1295,7 @@ func anAlertForEachEvent() []eventMessage {
 				Event: alerts.EventAnomaly, Netblock: netip.MustParsePrefix("192.0.2.0/24"),
 				Reason: "requests per minute over the threshold of 5000",
 			},
-			"fsn1app1/gitea: anomaly", "high chart_with_upwards_trend",
+			"fsn1app1/blog: anomaly", "high chart_with_upwards_trend",
 			"requests per minute over the threshold of 5000\nnetblock: 192.0.2.0/24",
 		},
 		{
@@ -1304,7 +1304,7 @@ func anAlertForEachEvent() []eventMessage {
 				Netblock: netip.MustParsePrefix("192.0.2.2/32"),
 				Reason:   "listed by a DNS blocklist",
 			},
-			"fsn1app1/gitea: reputation_hit", "low label",
+			"fsn1app1/blog: reputation_hit", "low label",
 			"listed by a DNS blocklist\nclient: 192.0.2.2\nnetblock: 192.0.2.2/32",
 		},
 		{
@@ -1312,7 +1312,7 @@ func anAlertForEachEvent() []eventMessage {
 				Event: alerts.EventSourceFailure, Reason: "asking GeoJS failed",
 				Detail: map[string]any{"source": "geojs"},
 			},
-			"fsn1app1/gitea: source_failure", "high warning",
+			"fsn1app1/blog: source_failure", "high warning",
 			"asking GeoJS failed\nsource: geojs",
 		},
 		{
@@ -1323,7 +1323,7 @@ func anAlertForEachEvent() []eventMessage {
 					"file": "/etc/smallwebwaf/rules.d/50-app.rules", "error": "line 2: no action",
 				},
 			},
-			"fsn1app1/gitea: file_error", "high warning",
+			"fsn1app1/blog: file_error", "high warning",
 			"a rule file has an error, and the rules stay as they were\n" +
 				"file: /etc/smallwebwaf/rules.d/50-app.rules\nerror: line 2: no action",
 		},

internal/config/config.go

@@ -221,12 +221,15 @@ type Config struct {
 	// WAFExemptPaths the path prefixes it does not inspect
 	// (SWWAF_WAF_EXEMPT_PATHS), and WAFBodyLimit the most of a request body
 	// it reads (SWWAF_WAF_BODY_LIMIT), 0 while it is off and it reads none.
+	// CoreRuleSetExclusionsFile is the path of the file of its exclusions
+	// (SWWAF_CORE_RULE_SET_EXCLUSIONS_FILE), "" while there is none.
 	WAFMode                   string
 	WAFParanoiaLevel          int
 	WAFAnomalyThreshold       int
 	WAFDisabledRules          []int
 	WAFExemptPaths            []string
 	WAFBodyLimit              int64
+	CoreRuleSetExclusionsFile string
 	// TrapPaths are the paths a request for which is a clear sign of
 	// attack (SWWAF_TRAP_PATHS), each starting with / and without a ?.
 	TrapPaths []string
@@ -409,7 +412,7 @@ var (
 	errNoCertificate = errors.New("holds no PEM certificate")
 	errNotFacility   = errors.New("is not a syslog facility such as local0 or daemon")
 	errNotAppName    = errors.New(
-		"is not 1 to 48 printable ASCII characters without a space, such as gitea")
+		"is not 1 to 48 printable ASCII characters without a space, such as blog")
 	errSetTwice      = errors.New("set only one of them")
 	errNotWebhookURL = errors.New(
 		"is not an http or https URL without a user or a fragment, " +
@@ -525,6 +528,8 @@ func FromEnvironment(lookupEnv func(string) (string, bool)) (*Config, error) {
 			"920340,920420,920440,920640,930130,930140"),
 		WAFExemptPaths: env.pathPrefixes("SWWAF_WAF_EXEMPT_PATHS", ""),
 		WAFBodyLimit:   env.wafBodyLimit("SWWAF_WAF_BODY_LIMIT", off),
+		CoreRuleSetExclusionsFile: env.filePath(
+			"SWWAF_CORE_RULE_SET_EXCLUSIONS_FILE"),
 		TrapPaths:            env.trapPaths("SWWAF_TRAP_PATHS"),
 		ErrorBurstThreshold:  env.count("SWWAF_ERROR_BURST_THRESHOLD", "30"),
 		LogRemoteURL:         env.logRemoteURL("SWWAF_LOG_REMOTE_URL"),
@@ -1189,6 +1194,16 @@ func (e *environment) logRemoteURL(name string) *url.URL {
 	return remote
 }
 
+// filePath reads a setting that is the path of a file, "" while it is
+// unset. Its value names a file already, so, unlike the other settings,
+// it has no _FILE form. Whoever uses the file reads it.
+func (e *environment) filePath(name string) string {
+	path, _ := e.lookupEnv(name)
+	e.settings = append(e.settings, slog.String(name, path))
+
+	return path
+}
+
 // certificates reads a setting that is the path of a file of PEM
 // certificates. Unset or empty, it is nil. Its value names a file
 // already, so, unlike the other settings, it has no _FILE form.

internal/config/config_test.go

@@ -87,6 +87,7 @@ const (
 	wafDisabledRules     = "SWWAF_WAF_DISABLED_RULES"
 	wafExemptPaths       = "SWWAF_WAF_EXEMPT_PATHS"
 	wafBodyLimit         = "SWWAF_WAF_BODY_LIMIT"
+	exclusionsFile       = "SWWAF_CORE_RULE_SET_EXCLUSIONS_FILE"
 	trapPaths            = "SWWAF_TRAP_PATHS"
 	errorBurstThreshold  = "SWWAF_ERROR_BURST_THRESHOLD"
 	logRemoteURL         = "SWWAF_LOG_REMOTE_URL"
@@ -197,7 +198,7 @@ const (
 // instance is an SWWAF_INSTANCE_NAME that is a valid app name too, and
 // remoteURL an SWWAF_LOG_REMOTE_URL, for the tests that send the lines.
 const (
-	instance  = "fsn1app1/gitea"
+	instance  = "fsn1app1/blog"
 	remoteURL = "syslog+udp://192.0.2.1:514"
 )
 
@@ -539,13 +540,14 @@ func TestCoreRuleSetSettings(t *testing.T) {
 			environment{
 				wafMode: config.WAFModeDetect, wafParanoiaLevel: "4", wafAnomalyThreshold: "10",
 				wafDisabledRules: "942100, 920350", wafExemptPaths: "/api/, /static/",
-				wafBodyLimit: "32K",
+				wafBodyLimit: "32K", exclusionsFile: "/etc/smallwebwaf/crs-exclusions.conf",
 			},
 			config.Config{
 				WAFMode: config.WAFModeDetect, WAFParanoiaLevel: 4, WAFAnomalyThreshold: 10,
 				WAFDisabledRules:          []int{942100, 920350},
 				WAFExemptPaths:            []string{"/api/", "/static/"},
 				WAFBodyLimit:              32 << 10,
+				CoreRuleSetExclusionsFile: "/etc/smallwebwaf/crs-exclusions.conf",
 			},
 		},
 		{
@@ -566,6 +568,7 @@ func TestCoreRuleSetSettings(t *testing.T) {
 			WAFAnomalyThreshold: cfg.WAFAnomalyThreshold,
 			WAFDisabledRules:    cfg.WAFDisabledRules, WAFExemptPaths: cfg.WAFExemptPaths,
 			WAFBodyLimit:              cfg.WAFBodyLimit,
+			CoreRuleSetExclusionsFile: cfg.CoreRuleSetExclusionsFile,
 		}
 		if !reflect.DeepEqual(got, tc.want) {
 			t.Errorf("%v gave\n%+v\nwant\n%+v", tc.env, got, tc.want)
@@ -650,11 +653,11 @@ func TestInstanceNameAndLoggedHeadersAsSet(t *testing.T) {
 	t.Parallel()
 
 	cfg := fromEnvironment(t, environment{
-		instanceName:      "fsn1app1/gitea",
+		instanceName:      "fsn1app1/blog",
 		logRequestHeaders: " Accept , X-Custom",
 	})
 
-	if cfg.InstanceName != "fsn1app1/gitea" ||
+	if cfg.InstanceName != "fsn1app1/blog" ||
 		!slices.Equal(cfg.LogRequestHeaders, []string{"accept", "x-custom"}) {
 		t.Errorf("%s is %q and %s gives %v", instanceName, cfg.InstanceName,
 			logRequestHeaders, cfg.LogRequestHeaders)
@@ -797,7 +800,7 @@ func TestInstanceNameNotAnAppNameStopsTheStartOnlyWhileSending(t *testing.T) {
 
 	want := logRemoteAppName + `: is unset, and ` + instanceName +
 		` "fsn1 app1", its default, is not 1 to 48 printable ASCII characters ` +
-		`without a space, such as gitea`
+		`without a space, such as blog`
 	if err == nil || err.Error() != want {
 		t.Errorf("error %v, want %s", err, want)
 	}
@@ -826,7 +829,7 @@ func TestAppNameSetStopsTheStartWhileSending(t *testing.T) {
 	}.lookupEnv)
 
 	want := logRemoteAppName + `: "my app" is not 1 to 48 printable ASCII ` +
-		`characters without a space, such as gitea`
+		`characters without a space, such as blog`
 	if err == nil || err.Error() != want {
 		t.Errorf("error %v, want %s", err, want)
 	}
@@ -2166,7 +2169,7 @@ func TestSettingFromFileIsCheckedAsTheSettingItself(t *testing.T) {
 	}.lookupEnv)
 
 	want = logRemoteAppName + `: "my app" is not 1 to 48 printable ASCII ` +
-		`characters without a space, such as gitea`
+		`characters without a space, such as blog`
 	if err == nil || err.Error() != want {
 		t.Errorf("error %v, want %s", err, want)
 	}
@@ -2327,6 +2330,7 @@ func TestLogsEachSettingWithItsValue(t *testing.T) {
 		wafDisabledRules:     defaultWAFDisabledRules,
 		wafExemptPaths:       "",
 		wafBodyLimit:         off,
+		exclusionsFile:       "",
 		trapPaths:            "",
 		errorBurstThreshold:  "30",
 		logRemoteURL:         "",

internal/remotelog/remotelog_test.go

@@ -44,7 +44,7 @@ import (
 const (
 	// started is the time a record made as a test starts gives.
 	started = "2000-01-01T00:00:00.000Z"
-	appName = "fsn1app1/gitea"
+	appName = "fsn1app1/blog"
 	// local0 is the number of the default facility, and local0Info the
 	// priority of its records.
 	local0     = 16
@@ -94,7 +94,7 @@ func TestRecordsOverTCPAreOctetCountedWithTheirFacility(t *testing.T) {
 		endpoint := listen(t)
 		endpointParams := params(remotelog.SchemeTCP, endpoint.Addr())
 		endpointParams.Facility = 19 // local3
-		endpointParams.AppName = "gitea"
+		endpointParams.AppName = "blog"
 		sender, _, _ := run(t, endpointParams)
 
 		_, _ = sender.Write([]byte("first\nsecond\n"))
@@ -103,8 +103,8 @@ func TestRecordsOverTCPAreOctetCountedWithTheirFacility(t *testing.T) {
 		wantCounts(t, sender, 2, 0, 0)
 
 		frames := bufio.NewReader(accept(t, endpoint))
-		wantFrame(t, frames, record(t, "<158>", "gitea", "first"))
-		wantFrame(t, frames, record(t, "<158>", "gitea", "second"))
+		wantFrame(t, frames, record(t, "<158>", "blog", "first"))
+		wantFrame(t, frames, record(t, "<158>", "blog", "second"))
 	})
 }
 

internal/requestlog/requestlog.go

@@ -131,16 +131,6 @@ type Line struct {
 	// ActionRuleBlocked, ActionWAFBlocked, or, in servewaf, ActionTooLarge
 	// for the header limits.
 	WouldAction string `json:"would_action,omitempty"`
-	// Heuristic is the name of the heuristic that refused the request, in
-	// observe mode too, and HeuristicFigures are the figures it acted on, by
-	// name.
-	Heuristic        string         `json:"heuristic,omitempty"`
-	HeuristicFigures map[string]any `json:"heuristic_figures,omitempty"`
-	// AfterAnswerHeuristic and AfterAnswerHeuristicFigures are the same for
-	// the heuristic that banned the client after servewaf answered the
-	// request.
-	AfterAnswerHeuristic        string         `json:"after_answer_heuristic,omitempty"`
-	AfterAnswerHeuristicFigures map[string]any `json:"after_answer_heuristic_figures,omitempty"` //nolint:lll // a struct tag cannot be split
 	// LimitPercent and LimitPercentSetting are, for a request the rate
 	// limits counted whose client a biased threshold gives a percentage of
 	// the rate limits below 100, that percentage and the setting that gave

internal/requestlog/requestlog_test.go

@@ -94,7 +94,7 @@ func TestProcessLinesAreMarkedProcessAndGiveTheInstance(t *testing.T) {
 
 	var out bytes.Buffer
 
-	requestlog.NewProcessLogger(&out, "fsn1app1/gitea", slog.LevelInfo).Info("starting",
+	requestlog.NewProcessLogger(&out, "fsn1app1/blog", slog.LevelInfo).Info("starting",
 		"version", "v1")
 
 	var fields map[string]any
@@ -104,7 +104,7 @@ func TestProcessLinesAreMarkedProcessAndGiveTheInstance(t *testing.T) {
 		t.Fatalf("decode %q: %v", out.String(), err)
 	}
 
-	if fields["type"] != "process" || fields["instance"] != "fsn1app1/gitea" ||
+	if fields["type"] != "process" || fields["instance"] != "fsn1app1/blog" ||
 		fields["msg"] != "starting" || fields["level"] != "INFO" ||
 		fields["version"] != "v1" {
 		t.Errorf("process line %v", fields)
@@ -133,7 +133,7 @@ func TestProcessLoggerWritesTheMessagesAtItsLevelOrMoreSevere(t *testing.T) {
 
 			var out bytes.Buffer
 
-			processLog := requestlog.NewProcessLogger(&out, "fsn1app1/gitea", level)
+			processLog := requestlog.NewProcessLogger(&out, "fsn1app1/blog", level)
 			for _, at := range levels {
 				processLog.Log(t.Context(), at, "message")
 			}

internal/servewaf/abuseipdb.go

@@ -1,55 +0,0 @@
-package servewaf
-
-// The heuristic abuseipdb. It reads SWWAF_ABUSEIPDB_KEY,
-// SWWAF_ABUSEIPDB_MIN_SCORE and SWWAF_REPUTATION_ACTION.
-
-import (
-	"context"
-	"time"
-
-	"sneak.berlin/go/smallwebwaf/internal/bans"
-	"sneak.berlin/go/smallwebwaf/internal/ratelimit"
-	"sneak.berlin/go/smallwebwaf/internal/reputation"
-	"sneak.berlin/go/smallwebwaf/internal/requestlog"
-)
-
-// abuseIPDB notes AbuseIPDB, as noteHit does, with the score, when its score
-// of the client is a hit, and refuses the request when SWWAF_REPUTATION_ACTION
-// is deny, as dnsbl does for a zone. While SWWAF_ABUSEIPDB_KEY is unset it does
-// nothing. A client without a score is checked in the background, by the
-// request's address, if its history counts an offence, and the request does
-// not wait for the answer. The score is then used for each address of the
-// client. Its figures are the score and SWWAF_ABUSEIPDB_MIN_SCORE.
-type abuseIPDB struct{}
-
-func (abuseIPDB) name() string { return "abuseipdb" }
-
-func (abuseIPDB) check(ctx context.Context, rq *request, _ time.Time) *verdict {
-	if rq.h.config.AbuseIPDBKey == "" {
-		return nil
-	}
-
-	client := rq.h.clientGroup(rq.client)
-	held, _ := rq.h.limiter.Client(client)
-	offender := held.History.Offences != ratelimit.Offences{}
-
-	score, hit := rq.h.abuseIPDB.Hit(ctx, client, rq.client, offender)
-	if !hit {
-		return nil
-	}
-
-	rq.abuseIPDBHit = true
-	rq.noteHit(bans.ReputationHit{Source: reputation.AbuseIPDBSource, Score: &score},
-		"scored by AbuseIPDB at or over SWWAF_ABUSEIPDB_MIN_SCORE")
-
-	if rq.h.config.ReputationAction != deny {
-		return nil
-	}
-
-	return &verdict{
-		action: requestlog.ActionDenied,
-		figures: map[string]any{
-			figureScore: score, "min_score": rq.h.config.AbuseIPDBMinScore,
-		},
-	}
-}

internal/servewaf/alerts_test.go

@@ -18,7 +18,7 @@ const (
 	alertWebhookURL = "SWWAF_ALERT_WEBHOOK_URL"
 	alertMaxPerHour = "SWWAF_ALERT_MAX_PER_HOUR"
 	// alertInstance is the instance every alert of these tests gives.
-	alertInstance = "fsn1app1/gitea"
+	alertInstance = "fsn1app1/blog"
 )
 
 func TestBanForABrokenLimitRaisesABanAlertWithItsNotes(t *testing.T) {

internal/servewaf/answertime_test.go

@@ -91,18 +91,6 @@ func TestSixteenThousandCookiesAreRefusedWellWithinTheTimeLimit(t *testing.T) {
 	}
 }
 
-func TestHeaderLimitRefusalNamesItsHeuristicCountsAndLimits(t *testing.T) {
-	t.Parallel()
-
-	s := startServeWAF(t, "", nil)
-	req := s.question(siteA, client, "/")
-	fillHeaders(req, headerFieldLimit+1)
-	do(t, req)
-
-	wantHeuristic(t, s.out.requestLine(t), "header_limits",
-		`{"fields": 101, "fields_limit": 100, "cookies": 0, "cookies_limit": 50}`)
-}
-
 func TestEachHeaderLimitRefusesARequestOverIt(t *testing.T) {
 	t.Parallel()
 

internal/servewaf/bans.go

@@ -1,10 +1,7 @@
 package servewaf
 
-// The heuristic active_ban, and the code that makes bans, which several
-// heuristics share. active_ban reads SWWAF_MODE; the bans are the ban ledger's.
-
 import (
-	"context"
+	"net/http"
 	"net/netip"
 	"time"
 
@@ -21,15 +18,11 @@ func (rq *request) banResponse(action string) *refusal {
 	return &refusal{status: rq.h.config.BanResponse, action: action}
 }
 
-// activeBan refuses a client a ban covers: a ban on a netblock the client is
-// in, in force at now. It notes for the log line when that ban ends. A request
-// that makes the ban permanent, or in observe mode would have, raises the alert
-// for it. Its figures are the ban's netblock and when it ends.
-type activeBan struct{}
-
-func (activeBan) name() string { return "active_ban" }
-
-func (activeBan) check(_ context.Context, rq *request, now time.Time) *verdict {
+// banned reports whether a ban on a netblock the client is in covers the
+// request at now, and notes for the log line when that ban ends. A
+// request that makes the ban permanent, or in observe mode would have,
+// raises the alert for it.
+func (rq *request) banned(now time.Time) bool {
 	check := rq.h.ledger.Check
 	if rq.h.config.Observe {
 		check = rq.h.ledger.Find // the ban refuses nothing, and stays as it is
@@ -45,24 +38,85 @@ func (activeBan) check(_ context.Context, rq *request, now time.Time) *verdict {
 		rq.alertBan(ban)
 	}
 
-	if !banned {
-		return nil
+	return banned
+}
+
+// limitBroken counts the request for the rate limits at now, notes the
+// client's counts for the log line, and reports whether the request takes
+// the client over a rate limit, as its limit percentage lowers it, which
+// breaks it.
+func (rq *request) limitBroken(now time.Time) bool {
+	counts, hit, over := rq.h.limiter.Count(rq.h.clientGroup(rq.client), now,
+		rq.limitPercent.percent)
+	rq.line.Counts = counts
+
+	if over {
+		rq.banForLimit(now, hit, rq.h.config.BanResponse)
 	}
 
-	return &verdict{
-		action: requestlog.ActionBanned,
-		figures: map[string]any{
-			figureNetblock: ban.Netblock.String(), "ban_expires": rq.line.BanExpires,
-		},
+	return over
+}
+
+// countBytes counts the request's bytes, as countedBytes gives them, for
+// the byte limits, once its report has come, and notes the client's byte totals
+// for the log line; its requests stay there as the rate limits counted them.
+// Only an allowed request has them counted, and only one the rate limits
+// counted; in observe mode, not one that enforce mode would have refused. Bytes
+// that take the client over a byte limit, as its limit percentage for the byte
+// limits lowers it, break it; the response was passed on whole.
+func (rq *request) countBytes() {
+	if !rq.counted || rq.line.WouldAction != "" {
+		return
+	}
+
+	now := rq.h.now()
+
+	counts, hit, over := rq.h.limiter.CountBytes(rq.h.clientGroup(rq.client), now,
+		rq.countedBytes(), rq.bytesPercent.percent)
+	rq.line.Counts.MinuteBytes = counts.MinuteBytes
+	rq.line.Counts.HourBytes = counts.HourBytes
+	rq.line.Counts.DayBytes = counts.DayBytes
+
+	if over {
+		rq.banForLimit(now, hit, rq.out.status)
 	}
 }
 
-// limitFigures are the figures of a heuristic that broke hit, a limit: its
-// window, the count and the limit.
-func limitFigures(hit ratelimit.Hit) map[string]any {
-	return map[string]any{
-		figureWindow: hit.Window, figureCount: hit.Count, figureLimit: hit.Limit,
+// countRefusal counts the request for the error burst once it has been
+// answered, if servewaf refused it after a rule file match, a trap path or a
+// Core Rule Set match, and in observe mode if enforce mode would have: more than
+// SWWAF_ERROR_BURST_THRESHOLD such refusals of the client within a minute
+// break a limit. A client in SWWAF_ALLOW_NETS, which the checks skip, is
+// not counted, and nothing is while the threshold is off.
+func (rq *request) countRefusal() {
+	cfg := rq.h.config
+	if cfg.ErrorBurstThreshold == 0 {
+		return
 	}
+
+	if !rq.attack && !rq.ruleBlocked && !rq.wafBlocked {
+		return
+	}
+
+	now := rq.h.now()
+
+	hit, over := rq.h.limiter.CountRefusal(rq.h.clientGroup(rq.client), now,
+		cfg.ErrorBurstThreshold)
+	if !over {
+		return
+	}
+
+	// What the client was sent, or in observe mode would have been.
+	status := rq.out.status
+
+	switch rq.line.WouldAction {
+	case requestlog.ActionRuleBlocked, requestlog.ActionWAFBlocked:
+		status = http.StatusForbidden
+	case requestlog.ActionBanned:
+		status = cfg.BanResponse
+	}
+
+	rq.banForLimit(now, hit, status)
 }
 
 // countedBytes returns the request's bytes, once it has ended, as the

internal/servewaf/bans_test.go

@@ -228,22 +228,6 @@ func TestBannedClientIsRefusedBeforeItsCountryIsLookedUp(t *testing.T) {
 	}
 }
 
-func TestRefusalUnderABanNamesItsHeuristicNetblockAndEnd(t *testing.T) {
-	t.Parallel()
-
-	s, clk, _ := startWithClock(t, "", map[string]string{
-		rateLimitPerMinute: "1", banScopeV4Prefix: "24",
-	})
-	expires := requestlog.FormatTime(clk.Now().Add(time.Hour))
-
-	s.get(client, http.StatusOK, requestlog.ActionForward)
-	s.get(client, http.StatusForbidden, requestlog.ActionRateLimited)
-
-	line := s.get(otherClient, http.StatusForbidden, requestlog.ActionBanned)
-	wantHeuristic(t, line, "active_ban",
-		`{"netblock": "`+clientsNet+`", "ban_expires": "`+expires+`"}`)
-}
-
 func TestBanResponseAnswersEveryRefusalButTheSizeLimits(t *testing.T) {
 	t.Parallel()
 

internal/servewaf/blocklists.go

@@ -1,41 +0,0 @@
-package servewaf
-
-// The heuristic blocklists. It reads SWWAF_BLOCKLIST_ACTION, and the blocklists
-// through the reputation lists.
-
-import (
-	"context"
-	"time"
-
-	"sneak.berlin/go/smallwebwaf/internal/requestlog"
-)
-
-// blocklists notes the blocklists that list the client, as noteListed does,
-// and refuses the request when SWWAF_BLOCKLIST_ACTION is deny. Being limit, it
-// lowers the client's limits instead (see limitPercentages), and being log, it
-// does nothing more. Its figure is the blocklists that list the client.
-type blocklists struct{}
-
-func (blocklists) name() string { return "blocklists" }
-
-func (blocklists) check(_ context.Context, rq *request, _ time.Time) *verdict {
-	listedBy := rq.h.lists.ListedBy(rq.client)
-	rq.blocklisted = len(listedBy) > 0
-	rq.noteListed(listedBy, "listed by a blocklist")
-
-	if !rq.refusedByBlocklists(listedBy) {
-		return nil
-	}
-
-	return &verdict{
-		action:  requestlog.ActionDenied,
-		figures: map[string]any{"lists": listedBy},
-	}
-}
-
-// refusedByBlocklists reports whether the heuristic blocklists refuses a
-// client, given listedBy, the blocklists that list it: it does when one lists
-// it and SWWAF_BLOCKLIST_ACTION is deny.
-func (rq *request) refusedByBlocklists(listedBy []string) bool {
-	return len(listedBy) > 0 && rq.h.config.BlocklistAction == deny
-}

internal/servewaf/bytelimits.go

@@ -1,43 +0,0 @@
-package servewaf
-
-// The heuristic byte_limits. It reads SWWAF_BYTES_COUNT, and the byte limits
-// and biased thresholds through the limiter and limitPercentages.
-
-import (
-	"context"
-	"time"
-
-	"sneak.berlin/go/smallwebwaf/internal/requestlog"
-)
-
-// byteLimits counts the request's bytes, as countedBytes gives them, for the
-// byte limits, once its report has come, and notes the client's byte totals for
-// the log line; its requests stay there as the rate limits counted them. Only
-// an allowed request has them counted, and only one the rate limits counted; in
-// observe mode, not one that enforce mode would have refused. Bytes that take
-// the client over a byte limit, as its limit percentage for the byte limits
-// lowers it, break it, which bans the client; the response was passed on whole.
-// Its figures are the window, the count and the limit.
-type byteLimits struct{}
-
-func (byteLimits) name() string { return "byte_limits" }
-
-func (byteLimits) check(_ context.Context, rq *request, now time.Time) *verdict {
-	if !rq.counted || rq.line.WouldAction != "" {
-		return nil
-	}
-
-	counts, hit, over := rq.h.limiter.CountBytes(rq.h.clientGroup(rq.client), now,
-		rq.countedBytes(), rq.bytesPercent.percent)
-	rq.line.Counts.MinuteBytes = counts.MinuteBytes
-	rq.line.Counts.HourBytes = counts.HourBytes
-	rq.line.Counts.DayBytes = counts.DayBytes
-
-	if !over {
-		return nil
-	}
-
-	rq.banForLimit(now, hit, rq.out.status)
-
-	return &verdict{action: requestlog.ActionBanned, figures: limitFigures(hit)}
-}

internal/servewaf/bytelimits_test.go

@@ -98,21 +98,6 @@ func TestEachByteLimitBansOnceTheResponseHasEnded(t *testing.T) {
 	}
 }
 
-func TestByteLimitBanNamesItsHeuristicWindowCountAndLimit(t *testing.T) {
-	t.Parallel()
-
-	s, _ := startWithAnswers(t, map[string]string{bytesLimitPerMinute: byteLimit})
-
-	line, _ := s.download()
-	wantAfterAnswerHeuristic(t, line, "", "null")
-
-	// Two answers of 70 bytes are over the limit of 99.
-	line, _ = s.download()
-	wantHeuristic(t, line, "", "null")
-	wantAfterAnswerHeuristic(t, line, "byte_limits",
-		`{"window": "minute", "count": 140, "limit": 99}`)
-}
-
 func TestResponseOverAByteLimitByItselfIsPassedOnWhole(t *testing.T) {
 	t.Parallel()
 

internal/servewaf/coreruleset.go

@@ -1,10 +1,6 @@
 package servewaf
 
-// The heuristic core_rule_set. It reads SWWAF_WAF_MODE, SWWAF_WAF_EXEMPT_PATHS
-// and SWWAF_WAF_ANOMALY_THRESHOLD.
-
 import (
-	"context"
 	"time"
 
 	"sneak.berlin/go/smallwebwaf/internal/alerts"
@@ -13,21 +9,18 @@ import (
 	"sneak.berlin/go/smallwebwaf/internal/waf"
 )
 
-// coreRuleSet inspects the request with the Core Rule Set, unless
+// checkCoreRuleSet inspects the request with the Core Rule Set, unless
 // SWWAF_WAF_MODE is off or SWWAF_WAF_EXEMPT_PATHS exempts its path, as
 // pathExempt decides, and notes the rules it matched and its score in the
 // log line, and the rules in the metrics. A score at or over
 // SWWAF_WAF_ANOMALY_THRESHOLD is a match: it raises the waf_block alert,
-// and in block mode refuses the request with 403, which is an offence its
-// client's history counts. Its figures are the score and the threshold.
-type coreRuleSet struct{}
-
-func (coreRuleSet) name() string { return "core_rule_set" }
-
-func (coreRuleSet) check(_ context.Context, rq *request, _ time.Time) *verdict {
+// and in block mode refuses the request, which is an offence its client's
+// history counts, and so returns ActionWAFBlocked. It returns "" for a
+// request it does not refuse.
+func (rq *request) checkCoreRuleSet() string {
 	cfg := rq.h.config
 	if cfg.WAFMode == config.WAFModeOff || pathExempt(rq.in, cfg.WAFExemptPaths) {
-		return nil
+		return ""
 	}
 
 	start := time.Now()
@@ -47,21 +40,18 @@ func (coreRuleSet) check(_ context.Context, rq *request, _ time.Time) *verdict {
 
 	threshold := cfg.WAFAnomalyThreshold
 	if threshold == 0 || result.Score < threshold {
-		return nil
+		return ""
 	}
 
 	rq.alertWAFBlock(result)
 
 	if cfg.WAFMode == config.WAFModeDetect {
-		return nil
+		return ""
 	}
 
 	rq.wafBlocked = true
 
-	return &verdict{
-		action:  requestlog.ActionWAFBlocked,
-		figures: map[string]any{figureScore: result.Score, "threshold": threshold},
-	}
+	return requestlog.ActionWAFBlocked
 }
 
 // alertWAFBlock raises the waf_block alert for the request, which the Core

internal/servewaf/coreruleset_test.go

@@ -110,16 +110,6 @@ func TestCoreRuleSetRefusesAttacksInBlockModeAndOnlyLogsThemInDetectMode(t *test
 	}
 }
 
-func TestCoreRuleSetRefusalNamesItsHeuristicScoreAndThreshold(t *testing.T) {
-	t.Parallel()
-
-	s, _, _ := startWithClock(t, "", map[string]string{wafMode: block})
-
-	line := s.request(client, sqlInjection, http.StatusForbidden,
-		requestlog.ActionWAFBlocked)
-	wantHeuristic(t, line, "core_rule_set", `{"score": 5, "threshold": 5}`)
-}
-
 func TestOrdinaryRequestIsInspectedAndPassed(t *testing.T) {
 	t.Parallel()
 

internal/servewaf/countries.go

@@ -1,42 +1,21 @@
 package servewaf
 
-// The heuristic countries. It reads SWWAF_DENIED_COUNTRIES and
-// SWWAF_EXCLUSIVELY_ALLOWED_COUNTRIES.
-
 import (
-	"context"
 	"slices"
-	"time"
-
-	"sneak.berlin/go/smallwebwaf/internal/requestlog"
 )
 
-// countries refuses a request by the client's country as it was looked up. A
-// client without a country, or whose country cannot be found, is refused only
-// by SWWAF_EXCLUSIVELY_ALLOWED_COUNTRIES. Its figures are the country and the
-// setting that refused it.
-type countries struct{}
-
-func (countries) name() string { return "countries" }
-
-func (countries) check(_ context.Context, rq *request, _ time.Time) *verdict {
+// countryDenied reports whether the country lists refuse the request, by
+// the client's country as it was looked up. A client without a country,
+// or whose country cannot be found, is refused only by
+// SWWAF_EXCLUSIVELY_ALLOWED_COUNTRIES.
+func (rq *request) countryDenied() bool {
 	denied := rq.h.config.DeniedCountries
 	allowed := rq.h.config.ExclusivelyAllowedCountries
 	country := rq.line.Country
 
-	var setting string
-
-	switch {
-	case slices.Contains(denied, country):
-		setting = "SWWAF_DENIED_COUNTRIES"
-	case len(allowed) > 0 && !slices.Contains(allowed, country):
-		setting = "SWWAF_EXCLUSIVELY_ALLOWED_COUNTRIES"
-	default:
-		return nil
+	if slices.Contains(denied, country) {
+		return true
 	}
 
-	return &verdict{
-		action:  requestlog.ActionCountryDenied,
-		figures: map[string]any{"country": country, "setting": setting},
-	}
+	return len(allowed) > 0 && !slices.Contains(allowed, country)
 }

internal/servewaf/countries_test.go

@@ -90,23 +90,6 @@ func TestCountryLists(t *testing.T) {
 	}
 }
 
-func TestCountryRefusalNamesItsHeuristicCountryAndSetting(t *testing.T) {
-	t.Parallel()
-
-	geojsURL, _ := startGeoJS(t)
-	s, _, _ := startWithClock(t, geojsURL, map[string]string{
-		lookupTimeout: "1h", deniedCountries: "kp", allowedCountries: "de",
-	})
-
-	line := s.get(fromKP, http.StatusForbidden, requestlog.ActionCountryDenied)
-	wantHeuristic(t, line, "countries",
-		`{"country": "KP", "setting": "SWWAF_DENIED_COUNTRIES"}`)
-
-	line = s.get(unplaced, http.StatusForbidden, requestlog.ActionCountryDenied)
-	wantHeuristic(t, line, "countries",
-		`{"country": "", "setting": "SWWAF_EXCLUSIVELY_ALLOWED_COUNTRIES"}`)
-}
-
 func TestCountryRefusalKeepsARequestFromTheApp(t *testing.T) {
 	t.Parallel()
 

internal/servewaf/crowdsec.go

@@ -1,49 +0,0 @@
-package servewaf
-
-// The heuristic crowdsec. It reads SWWAF_CROWDSEC_LAPI_URL, and the decisions
-// through the reputation lists.
-
-import (
-	"context"
-	"time"
-
-	"sneak.berlin/go/smallwebwaf/internal/bans"
-	"sneak.berlin/go/smallwebwaf/internal/reputation"
-	"sneak.berlin/go/smallwebwaf/internal/requestlog"
-)
-
-// crowdSec refuses a request when a decision of the CrowdSec decision list on
-// the client is in force at now. It then notes the list, as noteHit does, and
-// bans the client until that decision ends. Its figures are the decision's
-// scenario and when it ends.
-type crowdSec struct{}
-
-func (crowdSec) name() string { return "crowdsec" }
-
-func (crowdSec) check(_ context.Context, rq *request, now time.Time) *verdict {
-	decision, listed := rq.crowdSecDecisionInForce(now)
-	if !listed {
-		return nil
-	}
-
-	rq.noteHit(bans.ReputationHit{Source: rq.h.config.CrowdSecDecisionsURL},
-		"listed by the CrowdSec decision list")
-	rq.banForCrowdSec(now, decision)
-
-	return &verdict{
-		action: requestlog.ActionBanned,
-		figures: map[string]any{
-			"scenario": decision.Scenario,
-			"expires":  requestlog.FormatTime(decision.Expires),
-		},
-	}
-}
-
-// crowdSecDecisionInForce returns the decision of the CrowdSec decision list on
-// the client that is in force at now, and reports whether there is one, which
-// the heuristic crowdsec refuses the request for.
-func (rq *request) crowdSecDecisionInForce(
-	now time.Time,
-) (reputation.Decision, bool) {
-	return rq.h.lists.CrowdSecDecision(rq.client, now)
-}

internal/servewaf/crowdsec_test.go

@@ -95,21 +95,6 @@ func TestClientTheCrowdSecDecisionListListsIsBannedUntilTheDecisionEnds(t *testi
 		float64(fetched.Unix()))
 }
 
-func TestCrowdSecBanNamesItsHeuristicScenarioAndEnd(t *testing.T) {
-	t.Parallel()
-
-	s, clk, server, _ := startWithAlerts(t, map[string]string{
-		crowdSecURL: lapi, crowdSecKey: bouncerKey,
-	})
-	loadDecisions(t, server, clk.Now(), `[{"duration": "4h0m0s", `+
-		`"scenario": "crowdsecurity/ssh-bf", "scope": "Ip", "type": "ban", `+
-		`"value": "`+client+`"}]`)
-
-	line := s.get(client, http.StatusForbidden, requestlog.ActionBanned)
-	wantHeuristic(t, line, "crowdsec", `{"scenario": "crowdsecurity/ssh-bf", `+
-		`"expires": "`+requestlog.FormatTime(clk.Now().Add(4*time.Hour))+`"}`)
-}
-
 func TestEndedCrowdSecDecisionNoLongerBansThoughTheCopyStillHoldsIt(t *testing.T) {
 	t.Parallel()
 

internal/servewaf/denynets.go

@@ -1,29 +0,0 @@
-package servewaf
-
-// The heuristic deny_nets. It reads SWWAF_DENY_NETS.
-
-import (
-	"context"
-	"time"
-
-	"sneak.berlin/go/smallwebwaf/internal/requestlog"
-)
-
-// denyNets refuses a client in SWWAF_DENY_NETS. Its figure is the netblock of
-// the setting the client is in.
-type denyNets struct{}
-
-func (denyNets) name() string { return "deny_nets" }
-
-func (denyNets) check(_ context.Context, rq *request, _ time.Time) *verdict {
-	for _, netblock := range rq.h.config.DenyNets {
-		if netblock.Contains(rq.client) {
-			return &verdict{
-				action:  requestlog.ActionDenied,
-				figures: map[string]any{figureNetblock: netblock.String()},
-			}
-		}
-	}
-
-	return nil
-}

internal/servewaf/dnsbl.go

@@ -1,36 +0,0 @@
-package servewaf
-
-// The heuristic dnsbl. It reads SWWAF_REPUTATION_ACTION, and the DNSBL zones'
-// verdicts through the DNSBL checker.
-
-import (
-	"context"
-	"time"
-
-	"sneak.berlin/go/smallwebwaf/internal/requestlog"
-)
-
-// dnsbl notes the DNSBL zones whose verdict lists the client, as noteListed
-// does, and refuses the request when SWWAF_REPUTATION_ACTION is deny. Being
-// limit, it lowers the client's limits instead (see limitPercentages), and
-// being log, it does nothing more. A zone without a verdict on the client is
-// asked about it in the background, and the request does not wait for the
-// answer. Its figure is the zones that list the client, their keys masked.
-type dnsbl struct{}
-
-func (dnsbl) name() string { return "dnsbl" }
-
-func (dnsbl) check(ctx context.Context, rq *request, _ time.Time) *verdict {
-	listedBy := rq.h.dnsbl.ListedBy(ctx, rq.client)
-	rq.dnsblListed = len(listedBy) > 0
-	rq.noteListed(listedBy, "listed by a DNSBL zone")
-
-	if !rq.dnsblListed || rq.h.config.ReputationAction != deny {
-		return nil
-	}
-
-	return &verdict{
-		action:  requestlog.ActionDenied,
-		figures: map[string]any{"zones": listedBy},
-	}
-}

internal/servewaf/errorburst_test.go

@@ -106,25 +106,6 @@ func TestErrorBurstBreaksAtOneOverTheThreshold(t *testing.T) {
 	}
 }
 
-func TestRefusalLimitBanNamesItsHeuristicWindowCountAndLimit(t *testing.T) {
-	t.Parallel()
-
-	s, _, _ := startForErrorBurst(t, "1", nil)
-
-	const ruleFigures = `{"rule_id": "blocked", "rule_action": "block"}`
-
-	line := blockRule.send(s, client)
-	wantHeuristic(t, line, "rule_files", ruleFigures)
-	wantAfterAnswerHeuristic(t, line, "", "null")
-
-	// The second refusal is the request refusal_limit bans for, and the line
-	// names both.
-	line = blockRule.send(s, client)
-	wantHeuristic(t, line, "rule_files", ruleFigures)
-	wantAfterAnswerHeuristic(t, line, "refusal_limit",
-		`{"window": "minute", "count": 2, "limit": 1}`)
-}
-
 func TestErrorBurstBanNotesHistoryAndMetrics(t *testing.T) {
 	t.Parallel()
 

internal/servewaf/headerlimits.go

@@ -1,71 +0,0 @@
-package servewaf
-
-// The heuristic header_limits. It reads no setting: its limits are fixed.
-
-import (
-	"context"
-	"strings"
-	"time"
-
-	"sneak.berlin/go/smallwebwaf/internal/requestlog"
-)
-
-// The header limits: the most cookies and header fields a request may have
-// when the checks reach the Core Rule Set. Real clients never reach them.
-const (
-	maxCookies      = 50
-	maxHeaderFields = 100
-)
-
-// headerLimits refuses a request over the header limits, with 431. Its figures
-// are the request's header fields and cookies, and the limit of each.
-type headerLimits struct{}
-
-func (headerLimits) name() string { return "header_limits" }
-
-func (headerLimits) check(_ context.Context, rq *request, _ time.Time) *verdict {
-	fields, cookies := rq.headerCounts()
-	if !overHeaderLimits(fields, cookies) {
-		return nil
-	}
-
-	return &verdict{
-		action: requestlog.ActionTooLarge,
-		figures: map[string]any{
-			"fields": fields, "fields_limit": maxHeaderFields,
-			"cookies": cookies, "cookies_limit": maxCookies,
-		},
-	}
-}
-
-// overHeaderLimits reports whether a request with these counts of header fields
-// and cookies, as headerCounts counts them, is over the header limits: it has
-// more than maxHeaderFields fields or more than maxCookies cookies.
-func overHeaderLimits(fields, cookies int) bool {
-	return fields > maxHeaderFields || cookies > maxCookies
-}
-
-// headerCounts returns the request's header fields, each value of a header sent
-// twice being one, and its cookies, each part of a Cookie header between
-// semicolons being one unless it is empty or only spaces and tabs. The Core
-// Rule Set runs each of its rules on each cookie, so that thousands of small
-// cookies keep it busy for over a second. It trims only spaces and control
-// characters, of which a header value can hold only tabs, so a part of Unicode
-// spaces is a cookie to it.
-func (rq *request) headerCounts() (int, int) {
-	fields, cookies := 0, 0
-
-	for _, values := range rq.in.Header {
-		fields += len(values)
-	}
-
-	for _, value := range rq.in.Header.Values("Cookie") {
-		for part := range strings.SplitSeq(value, ";") {
-			if strings.Trim(part, " \t") != "" {
-				cookies++
-			}
-		}
-	}
-
-	return fields, cookies
-}

internal/servewaf/heuristics.go

@@ -1,133 +0,0 @@
-package servewaf
-
-import (
-	"context"
-	"time"
-)
-
-// To add a heuristic, write one file with a type that implements heuristic,
-// and add one line for it to one of the lists below. Its settings go in
-// config.Config, and the comment at the top of its file names them.
-
-// heuristic is one of the checks that decide what servewaf does with a request.
-type heuristic interface {
-	// name is the heuristic's name, which the log line gives.
-	name() string
-	// check looks at the request at now, and returns nil to let it through.
-	// ctx is the request's own context.
-	check(ctx context.Context, rq *request, now time.Time) *verdict
-}
-
-// verdict is a heuristic refusing a request, or banning its client: the action
-// the log line names, one of requestlog's Action constants, and the figures the
-// heuristic acted on, by name, such as the count and the limit.
-type verdict struct {
-	action  string
-	figures map[string]any
-}
-
-// The names of the figures that more than one heuristic gives.
-const (
-	figureWindow   = "window"
-	figureCount    = "count"
-	figureLimit    = "limit"
-	figureScore    = "score"
-	figureNetblock = "netblock"
-)
-
-// The lists of heuristics, each in the order its heuristics run. A client in
-// SWWAF_ALLOW_NETS skips them all.
-
-// beforeLookup are the heuristics that run before the client's AS number and
-// country are looked up, so that a client they refuse is not looked up.
-func beforeLookup() []heuristic {
-	return []heuristic{
-		denyNets{},
-		activeBan{},
-	}
-}
-
-// afterLookup are the heuristics that run once the lookup has been made.
-func afterLookup() []heuristic {
-	return []heuristic{
-		countries{},
-		blocklists{},
-		crowdSec{},
-		dnsbl{},
-		abuseIPDB{},
-		rateLimits{},
-		trapPaths{},
-		ruleFiles{},
-		headerLimits{},
-		coreRuleSet{},
-	}
-}
-
-// afterAnswer are the heuristics that run on a request once servewaf has
-// answered it, before its decision line is written. They ban the client, and do
-// not change what the request got: their verdict's action is not used.
-func afterAnswer() []heuristic {
-	return []heuristic{
-		refusalLimit{},
-	}
-}
-
-// onReport are the heuristics that run on an allowed request when rproxy's
-// report of it comes, before its report line is written. Like afterAnswer, they
-// only ban.
-func onReport() []heuristic {
-	return []heuristic{
-		byteLimits{},
-	}
-}
-
-// runAfterAnswer runs the heuristics of afterAnswer on the request, at the time
-// it is called.
-func (rq *request) runAfterAnswer(ctx context.Context) {
-	rq.runBanningHeuristics(ctx, afterAnswer())
-}
-
-// runHeuristics runs list, beforeLookup or afterLookup, on the request at now,
-// and returns the first verdict, or nil when none gives one. The log line's
-// heuristic and heuristic_figures name the heuristic that gave it, and give its
-// figures. ctx is the request's own context.
-func (rq *request) runHeuristics(
-	ctx context.Context, list []heuristic, now time.Time,
-) *verdict {
-	name, v := rq.firstVerdict(ctx, list, now)
-	if v != nil {
-		rq.line.Heuristic = name
-		rq.line.HeuristicFigures = v.figures
-	}
-
-	return v
-}
-
-// runBanningHeuristics runs list, afterAnswer or onReport, on the request at
-// the time it is called. The log line's after_answer_heuristic and
-// after_answer_heuristic_figures name the heuristic that gave a verdict, and
-// give its figures, so that heuristic and heuristic_figures still name the one
-// that refused the request. ctx is the request's own context.
-func (rq *request) runBanningHeuristics(ctx context.Context, list []heuristic) {
-	name, v := rq.firstVerdict(ctx, list, rq.h.now())
-	if v != nil {
-		rq.line.AfterAnswerHeuristic = name
-		rq.line.AfterAnswerHeuristicFigures = v.figures
-	}
-}
-
-// firstVerdict runs list on the request at now, in order, until a heuristic
-// gives a verdict, and returns that heuristic's name and its verdict, or "" and
-// nil when none gives one. ctx is the request's own context.
-func (rq *request) firstVerdict(
-	ctx context.Context, list []heuristic, now time.Time,
-) (string, *verdict) {
-	for _, each := range list {
-		v := each.check(ctx, rq, now)
-		if v != nil {
-			return each.name(), v
-		}
-	}
-
-	return "", nil
-}

internal/servewaf/observe_test.go

@@ -14,18 +14,6 @@ import (
 // observe is the value of SWWAF_MODE for observe mode.
 const observe = "observe"
 
-func TestObserveModeNamesTheHeuristicThatWouldHaveRefused(t *testing.T) {
-	t.Parallel()
-
-	s, _, _ := startWithClock(t, "", map[string]string{
-		mode: observe, denyNets: client,
-	})
-
-	line := s.get(client, http.StatusOK, requestlog.ActionForward)
-	wantWouldAction(t, line, requestlog.ActionDenied)
-	wantHeuristic(t, line, "deny_nets", `{"netblock": "`+client+`/32"}`)
-}
-
 func TestObserveModeForwardsWhatEnforceModeRefuses(t *testing.T) {
 	t.Parallel()
 

internal/servewaf/proxy.go

@@ -4,6 +4,7 @@
 package servewaf
 
 import (
+	"fmt"
 	"io"
 	"log/slog"
 	"net/http"
@@ -60,6 +61,9 @@ type Params struct {
 	// LookupFile is the lookup database they are looked up in while
 	// SWWAF_LOOKUP_SOURCE is file, and nil otherwise.
 	LookupFile *lookup.File
+	// CoreRuleSet is what NewCoreRuleSet returns: what inspects requests
+	// while SWWAF_WAF_MODE is not off, and nil while it is.
+	CoreRuleSet *waf.CoreRuleSet
 	// Now tells the time by which requests are counted for the rate
 	// limits, bans are made and run out, and GeoJS's answers are kept,
 	// normally time.Now in UTC, the time the state files give.
@@ -144,7 +148,7 @@ func newHandler(params Params) *handler {
 		dnsbl:       dnsbl,
 		abuseIPDB:   abuseIPDB,
 		rules:       params.Rules,
-		coreRuleSet: newCoreRuleSet(params.Config),
+		coreRuleSet: params.CoreRuleSet,
 		alerts:      params.Alerts,
 	}
 	h.geojs = lookup.New(lookup.Params{
@@ -202,29 +206,34 @@ func newReputation(
 	return lists, dnsbl, abuseIPDB
 }
 
-// newCoreRuleSet returns the Core Rule Set at SWWAF_WAF_PARANOIA_LEVEL,
+// NewCoreRuleSet returns the Core Rule Set at SWWAF_WAF_PARANOIA_LEVEL,
 // without the rules SWWAF_WAF_DISABLED_RULES switches off, reading bodies
-// up to SWWAF_WAF_BODY_LIMIT, or nil while SWWAF_WAF_MODE is off. It reads at
-// most QuestionBodyMaxBytes less one byte: a question's body of
+// up to SWWAF_WAF_BODY_LIMIT, with the exclusions in
+// SWWAF_CORE_RULE_SET_EXCLUSIONS_FILE, or nil while SWWAF_WAF_MODE is off. It
+// reads at most QuestionBodyMaxBytes less one byte: a question's body of
 // QuestionBodyMaxBytes may be cut short, and the Core Rule Set does not read a
-// JSON or XML body over its limit.
-func newCoreRuleSet(cfg *config.Config) *waf.CoreRuleSet {
-	if cfg.WAFMode == config.WAFModeOff {
-		return nil
+// JSON or XML body over its limit. An exclusions file that waf.New refuses is
+// an error in every mode. While the mode is off, a set file is loaded with the
+// Core Rule Set only to check it.
+func NewCoreRuleSet(cfg *config.Config) (*waf.CoreRuleSet, error) {
+	if cfg.WAFMode == config.WAFModeOff && cfg.CoreRuleSetExclusionsFile == "" {
+		return nil, nil //nolint:nilnil // off is no Core Rule Set, and no error
 	}
 
 	coreRuleSet, err := waf.New(waf.Params{
 		ParanoiaLevel: cfg.WAFParanoiaLevel, DisabledRules: cfg.WAFDisabledRules,
 		BodyLimit:      min(cfg.WAFBodyLimit, QuestionBodyMaxBytes-1),
+		ExclusionsFile: cfg.CoreRuleSetExclusionsFile,
 	})
 	if err != nil {
-		// The Core Rule Set is built in, and the settings cannot break it:
-		// the paranoia level is from 1 to 4, and the id of no rule switches
-		// nothing off.
-		panic(err)
+		return nil, fmt.Errorf("SWWAF_CORE_RULE_SET_EXCLUSIONS_FILE: %w", err)
 	}
 
-	return coreRuleSet
+	if cfg.WAFMode == config.WAFModeOff {
+		return nil, nil //nolint:nilnil // off is no Core Rule Set, and no error
+	}
+
+	return coreRuleSet, nil
 }
 
 // handler is servewaf's handler. It holds what every request shares; what

internal/servewaf/proxy_test.go

@@ -463,6 +463,11 @@ func newServeWAFWith(
 		}
 	}
 
+	coreRuleSet, err := servewaf.NewCoreRuleSet(cfg)
+	if err != nil {
+		t.Fatalf("Core Rule Set: %v", err)
+	}
+
 	server := build(servewaf.Params{
 		Config:       cfg,
 		RequestLog:   out,
@@ -470,6 +475,7 @@ func newServeWAFWith(
 		GeoJSURL:     geojsURL,
 		AbuseIPDBURL: abuseIPDBURL,
 		LookupFile:   lookupFile,
+		CoreRuleSet:  coreRuleSet,
 		Now:          now,
 		Rules:        ruleFiles,
 		Alerts:       alertQueue,

internal/servewaf/ratelimits.go

@@ -1,65 +0,0 @@
-package servewaf
-
-// The heuristic rate_limits. It reads SWWAF_RATE_LIMIT_EXEMPT_NETS,
-// SWWAF_RATE_LIMIT_EXEMPT_PATHS and SWWAF_BAN_RESPONSE, and the rate limits and
-// biased thresholds through the limiter and limitPercentages.
-
-import (
-	"context"
-	"time"
-
-	"sneak.berlin/go/smallwebwaf/internal/requestlog"
-)
-
-// rateLimits counts the request for the rate limits, unless
-// countedByRateLimits exempts it, by the client's limit percentages, which it
-// notes for the log line with the client's counts. A request that takes the
-// client over a rate limit, as its limit percentage lowers it, breaks it: it is
-// refused, and bans the client. A request exempt from the rate limits is exempt
-// from the byte limits too. Its figures are the window, the count and the
-// limit.
-type rateLimits struct{}
-
-func (rateLimits) name() string { return "rate_limits" }
-
-func (rateLimits) check(_ context.Context, rq *request, now time.Time) *verdict {
-	rq.counted = rq.countedByRateLimits()
-	if !rq.counted {
-		return nil
-	}
-
-	rq.limitPercent, rq.bytesPercent = rq.limitPercentages()
-	rq.line.LimitPercent, rq.line.LimitPercentSetting = rq.limitPercent.logged()
-	rq.line.BytesPercent, rq.line.BytesPercentSetting = rq.bytesPercent.logged()
-
-	counts, hit, over := rq.h.limiter.Count(rq.h.clientGroup(rq.client), now,
-		rq.limitPercent.percent)
-	rq.line.Counts = counts
-
-	if !over {
-		return nil
-	}
-
-	rq.banForLimit(now, hit, rq.h.config.BanResponse)
-
-	return &verdict{action: requestlog.ActionRateLimited, figures: limitFigures(hit)}
-}
-
-// overAWholeRateLimit reports whether the heuristic rate_limits will refuse the
-// request at now, whatever its client's limit percentages: the rate limits
-// count it, and one more request from its client takes it over a whole rate
-// limit. It counts nothing.
-func (rq *request) overAWholeRateLimit(now time.Time) bool {
-	return rq.countedByRateLimits() &&
-		rq.h.limiter.OverARateLimit(rq.h.clientGroup(rq.client), now)
-}
-
-// countedByRateLimits reports whether the rate limits count the request: its
-// client is not in SWWAF_RATE_LIMIT_EXEMPT_NETS, and its path is not exempt
-// under SWWAF_RATE_LIMIT_EXEMPT_PATHS.
-func (rq *request) countedByRateLimits() bool {
-	cfg := rq.h.config
-
-	return !isInside(rq.client, cfg.RateLimitExemptNets) &&
-		!pathExempt(rq.in, cfg.RateLimitExemptPaths)
-}

internal/servewaf/ratelimits_test.go

@@ -72,17 +72,6 @@ func TestRateLimitRefusesBeforeTheApp(t *testing.T) {
 	}
 }
 
-func TestRateLimitRefusalNamesItsHeuristicWindowCountAndLimit(t *testing.T) {
-	t.Parallel()
-
-	s, _, _ := startWithClock(t, "", map[string]string{rateLimitPerMinute: "1"})
-
-	s.get(client, http.StatusOK, requestlog.ActionForward)
-
-	line := s.get(client, http.StatusForbidden, requestlog.ActionRateLimited)
-	wantHeuristic(t, line, "rate_limits", `{"window": "minute", "count": 2, "limit": 1}`)
-}
-
 func TestIPv6GroupPrefixSetsTheClientTheLimitsCount(t *testing.T) {
 	t.Parallel()
 

internal/servewaf/refusallimit.go

@@ -1,54 +0,0 @@
-package servewaf
-
-// The heuristic refusal_limit. It reads SWWAF_ERROR_BURST_THRESHOLD and
-// SWWAF_BAN_RESPONSE.
-
-import (
-	"context"
-	"net/http"
-	"time"
-
-	"sneak.berlin/go/smallwebwaf/internal/requestlog"
-)
-
-// refusalLimit counts the request once it has been answered, if servewaf
-// refused it after a rule file match, a trap path or a Core Rule Set match, and
-// in observe mode if enforce mode would have: more than
-// SWWAF_ERROR_BURST_THRESHOLD such refusals of the client within a minute break
-// a limit, which bans the client. A client in SWWAF_ALLOW_NETS, which the
-// heuristics skip, is not counted, and nothing is while the threshold is off.
-// Its figures are the window, the count and the limit.
-type refusalLimit struct{}
-
-func (refusalLimit) name() string { return "refusal_limit" }
-
-func (refusalLimit) check(_ context.Context, rq *request, now time.Time) *verdict {
-	cfg := rq.h.config
-	if cfg.ErrorBurstThreshold == 0 {
-		return nil
-	}
-
-	if !rq.attack && !rq.ruleBlocked && !rq.wafBlocked {
-		return nil
-	}
-
-	hit, over := rq.h.limiter.CountRefusal(rq.h.clientGroup(rq.client), now,
-		cfg.ErrorBurstThreshold)
-	if !over {
-		return nil
-	}
-
-	// What the client was sent, or in observe mode would have been.
-	status := rq.out.status
-
-	switch rq.line.WouldAction {
-	case requestlog.ActionRuleBlocked, requestlog.ActionWAFBlocked:
-		status = http.StatusForbidden
-	case requestlog.ActionBanned:
-		status = cfg.BanResponse
-	}
-
-	rq.banForLimit(now, hit, status)
-
-	return &verdict{action: requestlog.ActionBanned, figures: limitFigures(hit)}
-}

internal/servewaf/reputation.go

@@ -1,17 +1,91 @@
 package servewaf
 
-// What the reputation heuristics share: blocklists, crowdsec, dnsbl and
-// abuseipdb.
-
 import (
+	"context"
+	"time"
+
 	"sneak.berlin/go/smallwebwaf/internal/alerts"
 	"sneak.berlin/go/smallwebwaf/internal/bans"
+	"sneak.berlin/go/smallwebwaf/internal/ratelimit"
+	"sneak.berlin/go/smallwebwaf/internal/reputation"
 )
 
 // deny is the SWWAF_BLOCKLIST_ACTION and the SWWAF_REPUTATION_ACTION that
 // refuses the requests of a client a source lists.
 const deny = "deny"
 
+// blocklistDenied notes the blocklists that list the client, as
+// noteListed does, and reports whether SWWAF_BLOCKLIST_ACTION, being deny,
+// refuses the request. Being limit, it lowers the client's limits instead
+// (see limitPercentages), and being log, it does nothing more.
+func (rq *request) blocklistDenied() bool {
+	listedBy := rq.h.lists.ListedBy(rq.client)
+	rq.blocklisted = len(listedBy) > 0
+	rq.noteListed(listedBy, "listed by a blocklist")
+
+	return rq.blocklisted && rq.h.config.BlocklistAction == deny
+}
+
+// crowdSecBanned reports whether a decision of the CrowdSec decision list
+// on the client is in force at now. If one is, it notes the list, as
+// noteHit does, and bans the client until that decision ends.
+func (rq *request) crowdSecBanned(now time.Time) bool {
+	decision, listed := rq.h.lists.CrowdSecDecision(rq.client, now)
+	if !listed {
+		return false
+	}
+
+	rq.noteHit(bans.ReputationHit{Source: rq.h.config.CrowdSecDecisionsURL},
+		"listed by the CrowdSec decision list")
+	rq.banForCrowdSec(now, decision)
+
+	return true
+}
+
+// dnsblDenied notes the DNSBL zones whose verdict lists the client, as
+// noteListed does, and reports whether SWWAF_REPUTATION_ACTION, being
+// deny, refuses the request. Being limit, it lowers the client's limits
+// instead (see limitPercentages), and being log, it does nothing more. A
+// zone without a verdict on the client is asked about it in the
+// background, and the request does not wait for the answer. ctx is the
+// request's own context.
+func (rq *request) dnsblDenied(ctx context.Context) bool {
+	listedBy := rq.h.dnsbl.ListedBy(ctx, rq.client)
+	rq.dnsblListed = len(listedBy) > 0
+	rq.noteListed(listedBy, "listed by a DNSBL zone")
+
+	return rq.dnsblListed && rq.h.config.ReputationAction == deny
+}
+
+// abuseIPDBDenied notes AbuseIPDB, as noteHit does, with the score, when
+// its score of the client is a hit, and reports whether
+// SWWAF_REPUTATION_ACTION, being deny, refuses the request, as dnsblDenied
+// does for a zone. While SWWAF_ABUSEIPDB_KEY is unset it does nothing. A
+// client without a score is checked in the background, by the request's
+// address, if its history counts an offence, and the request does not
+// wait for the answer. The score is then used for each address of the
+// client. ctx is the request's own context.
+func (rq *request) abuseIPDBDenied(ctx context.Context) bool {
+	if rq.h.config.AbuseIPDBKey == "" {
+		return false
+	}
+
+	client := rq.h.clientGroup(rq.client)
+	held, _ := rq.h.limiter.Client(client)
+	offender := held.History.Offences != ratelimit.Offences{}
+
+	score, hit := rq.h.abuseIPDB.Hit(ctx, client, rq.client, offender)
+	if !hit {
+		return false
+	}
+
+	rq.abuseIPDBHit = true
+	rq.noteHit(bans.ReputationHit{Source: reputation.AbuseIPDBSource, Score: &score},
+		"scored by AbuseIPDB at or over SWWAF_ABUSEIPDB_MIN_SCORE")
+
+	return rq.h.config.ReputationAction == deny
+}
+
 // noteListed notes each of sources, the URLs of the blocklists or the
 // DNSBL zones, their keys masked, that list the client, as noteHit does,
 // with reason.

internal/servewaf/reputation_test.go

@@ -118,56 +118,6 @@ func TestEachBlocklistActionForAListedAddressAndAListedNetblock(t *testing.T) {
 	}
 }
 
-func TestReputationRefusalNamesItsHeuristicAndWhatListedTheClient(t *testing.T) {
-	t.Parallel()
-
-	for _, tc := range []struct {
-		heuristic string
-		env       map[string]string
-		load      func(*testing.T, *servewaf.Server)
-		figures   string
-	}{
-		{
-			"blocklists",
-			map[string]string{blocklistURLs: dropURL, blocklistAction: actionDeny},
-			func(t *testing.T, server *servewaf.Server) {
-				t.Helper()
-				loadLists(t, server, map[string][]string{dropURL: {client}})
-			},
-			`{"lists": ["` + dropURL + `"]}`,
-		},
-		{
-			"dnsbl",
-			map[string]string{
-				dnsblZones: dnsblZone, dnsblResolver: noResolver,
-				reputationAction: actionDeny,
-			},
-			func(_ *testing.T, server *servewaf.Server) {
-				loadVerdicts(server, map[string][]string{client: {dnsblZone}})
-			},
-			`{"zones": ["` + dnsblZone + `"]}`,
-		},
-		{
-			"abuseipdb",
-			map[string]string{abuseIPDBKey: accountKey, reputationAction: actionDeny},
-			func(_ *testing.T, server *servewaf.Server) {
-				loadScores(server, map[string]int64{client: 80})
-			},
-			`{"score": 80, "min_score": 75}`,
-		},
-	} {
-		t.Run(tc.heuristic, func(t *testing.T) {
-			t.Parallel()
-
-			s, server, _ := startWithLookups(t, tc.env)
-			tc.load(t, server)
-
-			line := s.get(client, http.StatusForbidden, requestlog.ActionDenied)
-			wantHeuristic(t, line, tc.heuristic, tc.figures)
-		})
-	}
-}
-
 func TestBlocklistsComeAfterTheCountryListsAndSkipAllowNets(t *testing.T) {
 	t.Parallel()
 

internal/servewaf/request.go

@@ -160,20 +160,16 @@ func requestHeaders(r *http.Request, names []string) map[string]string {
 }
 
 // check is the one place where a request can be refused. It returns nil to let
-// the request through. The heuristics of checkClient decide: a request they
-// refuse is answered with SWWAF_BAN_RESPONSE, 403 for a block rule or the Core
-// Rule Set, or 431 for the header limits. In observe mode nothing is refused,
-// and the log line names what enforce mode would have done. ctx is the
-// request's own context.
+// the request through. The checks of checkClient decide: a request they refuse
+// is answered with SWWAF_BAN_RESPONSE, 403 for a block rule or the Core Rule Set,
+// or 431 for the header limits. In observe mode nothing is refused, and the log
+// line names what enforce mode would have done. ctx is the request's own context.
 func (rq *request) check(ctx context.Context) *refusal {
-	v := rq.checkClient(ctx)
-	if v == nil {
-		return nil
-	}
-
-	action := v.action
+	action := rq.checkClient(ctx)
 
 	switch {
+	case action == "":
+		return nil
 	case rq.h.config.Observe:
 		rq.line.WouldAction = action
 
@@ -187,21 +183,35 @@ func (rq *request) check(ctx context.Context) *refusal {
 	}
 }
 
-// checkClient runs the heuristics of beforeLookup on the request, then looks
-// up the client's AS number and country, then runs those of afterLookup. It
-// returns the first verdict, or nil when none gives one. A client in
-// SWWAF_ALLOW_NETS skips them all, and is not looked up. ctx is the request's
-// own context.
-func (rq *request) checkClient(ctx context.Context) *verdict {
-	if isInside(rq.client, rq.h.config.AllowNets) {
-		return nil
+// checkClient runs the checks on the request's client, and returns the
+// action of the first that refuses the request, or "" when none does. A
+// client in SWWAF_ALLOW_NETS skips them, and is not looked up. For any
+// other client, SWWAF_DENY_NETS comes first, then a ban on its netblock,
+// so that a client either refuses is not looked up, then the lookup of
+// its AS number and country, then the country lists, then the blocklists,
+// then the CrowdSec decision list, which bans the client it lists, then
+// the DNSBL zones' verdicts, and then AbuseIPDB's score; a request any of
+// them refuses is not counted for the rate limits. Then come the
+// rate limits, unless the client is in SWWAF_RATE_LIMIT_EXEMPT_NETS or the
+// request's path is exempt under SWWAF_RATE_LIMIT_EXEMPT_PATHS, so that
+// every other request is counted, each of them by the client's limit
+// percentages, then SWWAF_TRAP_PATHS, then the rule files, then the header
+// limits, and last the Core Rule Set. A request exempt from the rate limits
+// is exempt from the byte limits too. ctx is the request's own context.
+func (rq *request) checkClient(ctx context.Context) string {
+	cfg := rq.h.config
+	if isInside(rq.client, cfg.AllowNets) {
+		return ""
 	}
 
 	now := rq.h.now()
 
-	v := rq.runHeuristics(ctx, beforeLookup(), now)
-	if v != nil {
-		return v
+	if isInside(rq.client, cfg.DenyNets) {
+		return requestlog.ActionDenied
+	}
+
+	if rq.banned(now) {
+		return requestlog.ActionBanned
 	}
 
 	rq.lookUp(ctx, now)
@@ -210,7 +220,59 @@ func (rq *request) checkClient(ctx context.Context) *verdict {
 	// again: a request counted at the time it arrived could be counted
 	// after a later one of its client's, which the rate limits would take
 	// for the clock set back.
-	return rq.runHeuristics(ctx, afterLookup(), rq.h.now())
+	now = rq.h.now()
+
+	if rq.countryDenied() {
+		return requestlog.ActionCountryDenied
+	}
+
+	if rq.blocklistDenied() {
+		return requestlog.ActionDenied
+	}
+
+	if rq.crowdSecBanned(now) {
+		return requestlog.ActionBanned
+	}
+
+	if rq.dnsblDenied(ctx) || rq.abuseIPDBDenied(ctx) {
+		return requestlog.ActionDenied
+	}
+
+	rq.counted = rq.countedByRateLimits()
+	if rq.counted {
+		rq.limitPercent, rq.bytesPercent = rq.limitPercentages()
+		rq.line.LimitPercent, rq.line.LimitPercentSetting = rq.limitPercent.logged()
+		rq.line.BytesPercent, rq.line.BytesPercentSetting = rq.bytesPercent.logged()
+	}
+
+	if rq.counted && rq.limitBroken(now) {
+		return requestlog.ActionRateLimited
+	}
+
+	if rq.trapPath(now) {
+		return requestlog.ActionBanned
+	}
+
+	action := rq.checkRules(now)
+	if action != "" {
+		return action
+	}
+
+	if rq.overHeaderLimits() {
+		return requestlog.ActionTooLarge
+	}
+
+	return rq.checkCoreRuleSet()
+}
+
+// countedByRateLimits reports whether the rate limits count the request: its
+// client is not in SWWAF_RATE_LIMIT_EXEMPT_NETS, and its path is not exempt
+// under SWWAF_RATE_LIMIT_EXEMPT_PATHS.
+func (rq *request) countedByRateLimits() bool {
+	cfg := rq.h.config
+
+	return !isInside(rq.client, cfg.RateLimitExemptNets) &&
+		!pathExempt(rq.in, cfg.RateLimitExemptPaths)
 }
 
 // pathExempt reports whether r is exempt under prefixes,

internal/servewaf/requestlog_test.go

@@ -1,7 +1,6 @@
 package servewaf_test
 
 import (
-	"encoding/json"
 	"io"
 	"math"
 	"net/http"
@@ -20,7 +19,7 @@ const (
 	// requestIDHeader carries the request's id.
 	requestIDHeader = "X-Request-ID"
 	// instance is the SWWAF_INSTANCE_NAME a test sets.
-	instance = "fsn1app1/gitea"
+	instance = "fsn1app1/blog"
 	// ipv6Client is a client on IPv6, and ipv6Group the netblock the rate
 	// limits count it as.
 	ipv6Client = "2001:db8::7"
@@ -273,48 +272,6 @@ func wantTimings(t *testing.T, line logLine, want ...string) {
 	}
 }
 
-// wantHeuristic checks that line names heuristic as the one that refused the
-// request, with figures, a JSON object. A heuristic of "" with figures "null" is
-// a line that names none.
-func wantHeuristic(t *testing.T, line logLine, heuristic, figures string) {
-	t.Helper()
-
-	if line.Heuristic != heuristic ||
-		!reflect.DeepEqual(line.HeuristicFigures, decodeFigures(t, figures)) {
-		t.Errorf("log line has heuristic %q with heuristic_figures %v, want %q with %s",
-			line.Heuristic, line.HeuristicFigures, heuristic, figures)
-	}
-}
-
-// wantAfterAnswerHeuristic checks after_answer_heuristic and
-// after_answer_heuristic_figures as wantHeuristic checks heuristic and
-// heuristic_figures.
-func wantAfterAnswerHeuristic(t *testing.T, line logLine, heuristic, figures string) {
-	t.Helper()
-
-	if line.AfterAnswerHeuristic != heuristic ||
-		!reflect.DeepEqual(line.AfterAnswerHeuristicFigures, decodeFigures(t, figures)) {
-		t.Errorf("log line has after_answer_heuristic %q with "+
-			"after_answer_heuristic_figures %v, want %q with %s",
-			line.AfterAnswerHeuristic, line.AfterAnswerHeuristicFigures, heuristic, figures)
-	}
-}
-
-// decodeFigures decodes figures, a JSON object of a heuristic's figures, as
-// the log line's figures are decoded.
-func decodeFigures(t *testing.T, figures string) map[string]any {
-	t.Helper()
-
-	var decoded map[string]any
-
-	err := json.Unmarshal([]byte(figures), &decoded)
-	if err != nil {
-		t.Fatalf("decode %s: %v", figures, err)
-	}
-
-	return decoded
-}
-
 // microseconds is a timing in whole microseconds.
 func microseconds(milliseconds float64) int64 {
 	return int64(math.Round(milliseconds * 1000))

internal/servewaf/rulefiles.go

@@ -1,55 +0,0 @@
-package servewaf
-
-// The heuristic rule_files. It reads the rules of the rule files, which
-// SWWAF_RULES_DIR and SWWAF_RULES_ENABLED name.
-
-import (
-	"context"
-	"time"
-
-	"sneak.berlin/go/smallwebwaf/internal/bans"
-	"sneak.berlin/go/smallwebwaf/internal/requestlog"
-	"sneak.berlin/go/smallwebwaf/internal/rules"
-)
-
-// ruleFiles checks the request against the rules of the rule files at now,
-// notes the ids of those it matches in the log line, and refuses the request
-// when the last rule it matches refuses it: with ActionRuleBlocked for a block
-// rule, and ActionBanned for a ban rule. A ban rule bans the client's netblock
-// for a clear sign of attack, or in observe mode raises the alert for the ban
-// it would have made. Either rule's match is noted as an offence, for the
-// client's history. Its figures are the rule's id and action.
-type ruleFiles struct{}
-
-func (ruleFiles) name() string { return "rule_files" }
-
-func (ruleFiles) check(_ context.Context, rq *request, now time.Time) *verdict {
-	matched := rq.h.rules.Match(rq.in)
-
-	for _, rule := range matched {
-		rq.line.RuleIDs = append(rq.line.RuleIDs, rule.ID)
-		rq.h.metrics.RuleMatched(rule.ID, rule.Action)
-	}
-
-	if len(matched) == 0 {
-		return nil
-	}
-
-	// Only the last rule matched can refuse the request.
-	last := matched[len(matched)-1]
-	figures := map[string]any{"rule_id": last.ID, "rule_action": last.Action}
-
-	switch last.Action {
-	case rules.ActionBlock:
-		rq.ruleBlocked = true
-
-		return &verdict{action: requestlog.ActionRuleBlocked, figures: figures}
-	case rules.ActionBan:
-		rq.attack = true
-		rq.banForAttack(now, bans.Notes{RuleID: last.ID, Target: last.Target})
-
-		return &verdict{action: requestlog.ActionBanned, figures: figures}
-	default:
-		return nil
-	}
-}

internal/servewaf/rulefiles_test.go

@@ -93,21 +93,6 @@ func TestEachRuleAction(t *testing.T) {
 	s.get(client, http.StatusTooManyRequests, requestlog.ActionBanned)
 }
 
-func TestRuleRefusalNamesItsHeuristicAndTheRule(t *testing.T) {
-	t.Parallel()
-
-	s, _, _ := startWithClock(t, "", map[string]string{
-		rulesDir: writeRules(t, "noted path log ^/\n"+testRules),
-	})
-
-	line := s.request(client, "/blocked", http.StatusForbidden,
-		requestlog.ActionRuleBlocked)
-	wantHeuristic(t, line, "rule_files", `{"rule_id": "blocked", "rule_action": "block"}`)
-
-	line = s.request(client, "/.env", http.StatusForbidden, requestlog.ActionBanned)
-	wantHeuristic(t, line, "rule_files", `{"rule_id": "probe", "rule_action": "ban"}`)
-}
-
 func TestNextClearSignOfAttackAfterABanBansPermanently(t *testing.T) {
 	t.Parallel()
 

internal/servewaf/rules.go

@@ -0,0 +1,64 @@
+package servewaf
+
+import (
+	"slices"
+	"time"
+
+	"sneak.berlin/go/smallwebwaf/internal/bans"
+	"sneak.berlin/go/smallwebwaf/internal/requestlog"
+	"sneak.berlin/go/smallwebwaf/internal/rules"
+)
+
+// trapPath reports whether the request asks for a path in
+// SWWAF_TRAP_PATHS: its path as a path rule sees it, without the query,
+// as sent or once percent-decoded, is one of them. Such a request is a
+// clear sign of attack, as a ban rule's match is: it bans the client's
+// netblock, or in observe mode raises the alert for the ban it would have
+// made. The ban's notes give the path as sent.
+func (rq *request) trapPath(now time.Time) bool {
+	path := rules.Path(rq.in)
+	if !slices.Contains(rq.h.config.TrapPaths, path) &&
+		!slices.Contains(rq.h.config.TrapPaths, rules.DecodeOnce(path)) {
+		return false
+	}
+
+	rq.attack = true
+	rq.banForAttack(now, bans.Notes{TrapPath: path})
+
+	return true
+}
+
+// checkRules checks the request against the rules of the rule files at
+// now, notes the ids of those it matches in the log line, and returns the
+// action of the rule that refuses it, ActionRuleBlocked for a block rule
+// and ActionBanned for a ban rule, or "" when none does. A ban rule bans
+// the client's netblock for a clear sign of attack, or in observe mode
+// raises the alert for the ban it would have made. Either rule's match
+// is noted as an offence, for the client's history.
+func (rq *request) checkRules(now time.Time) string {
+	matched := rq.h.rules.Match(rq.in)
+
+	for _, rule := range matched {
+		rq.line.RuleIDs = append(rq.line.RuleIDs, rule.ID)
+		rq.h.metrics.RuleMatched(rule.ID, rule.Action)
+	}
+
+	if len(matched) == 0 {
+		return ""
+	}
+
+	// Only the last rule matched can refuse the request.
+	switch last := matched[len(matched)-1]; last.Action {
+	case rules.ActionBlock:
+		rq.ruleBlocked = true
+
+		return requestlog.ActionRuleBlocked
+	case rules.ActionBan:
+		rq.attack = true
+		rq.banForAttack(now, bans.Notes{RuleID: last.ID, Target: last.Target})
+
+		return requestlog.ActionBanned
+	default:
+		return ""
+	}
+}

internal/servewaf/servewaf.go

@@ -2,7 +2,6 @@ package servewaf
 
 import (
 	"bytes"
-	"context"
 	"encoding/json"
 	"errors"
 	"fmt"
@@ -53,6 +52,13 @@ const ReportPath = "/_smallwebwaf/report"
 // QuestionBodyMaxBytes is the most of a visitor's body a question carries.
 const QuestionBodyMaxBytes = 64 << 10
 
+// The header limits: the most cookies and header fields a request may have
+// when the checks reach the Core Rule Set. Real clients never reach them.
+const (
+	maxCookies      = 50
+	maxHeaderFields = 100
+)
+
 const (
 	// maxAwaitingReport is the most answered requests held until their
 	// reports come. Past it, the request answered longest ago is dropped.
@@ -141,20 +147,48 @@ func (h *handler) ServeHTTP(w http.ResponseWriter, r *http.Request) {
 
 // refusedWhateverTheAnswer reports whether the request is one that does not wait
 // for GeoJS, since the checks will refuse it at now whatever GeoJS answers about
-// its client: the heuristic crowdsec, header_limits, blocklists or rate_limits
-// will refuse it, as a function in that heuristic's file says. In observe mode,
-// which refuses nothing, none is. rproxy lets a request through when servewaf
-// answers too late.
+// its client: it is over the header limits, a blocklist lists its client while
+// SWWAF_BLOCKLIST_ACTION is deny, the CrowdSec decision list lists it, or it is
+// over a whole rate limit. In observe mode, which refuses nothing, none is.
+// rproxy lets a request through when servewaf answers too late.
 func (rq *request) refusedWhateverTheAnswer(now time.Time) bool {
 	if rq.h.config.Observe {
 		return false
 	}
 
-	_, decided := rq.crowdSecDecisionInForce(now)
+	lists := rq.h.lists
+	_, decided := lists.CrowdSecDecision(rq.client, now)
 
-	return decided || overHeaderLimits(rq.headerCounts()) ||
-		rq.refusedByBlocklists(rq.h.lists.ListedBy(rq.client)) ||
-		rq.overAWholeRateLimit(now)
+	return decided || rq.overHeaderLimits() ||
+		(rq.h.config.BlocklistAction == deny && len(lists.ListedBy(rq.client)) > 0) ||
+		(rq.countedByRateLimits() &&
+			rq.h.limiter.OverARateLimit(rq.h.clientGroup(rq.client), now))
+}
+
+// overHeaderLimits reports whether servewaf refuses the request for its
+// headers: it has more than maxHeaderFields fields, each value of a header sent
+// twice being one, or more than maxCookies cookies, each part of a Cookie header
+// between semicolons being one unless it is empty or only spaces and tabs. The
+// Core Rule Set runs each of its rules on each cookie, so that thousands of small
+// cookies keep it busy for over a second. It trims only spaces and control
+// characters, of which a header value can hold only tabs, so a part of Unicode
+// spaces is a cookie to it.
+func (rq *request) overHeaderLimits() bool {
+	fields, cookies := 0, 0
+
+	for _, values := range rq.in.Header {
+		fields += len(values)
+	}
+
+	for _, value := range rq.in.Header.Values("Cookie") {
+		for part := range strings.SplitSeq(value, ";") {
+			if strings.Trim(part, " \t") != "" {
+				cookies++
+			}
+		}
+	}
+
+	return fields > maxHeaderFields || cookies > maxCookies
 }
 
 // answerQuestion runs the checks on the visitor's request a question
@@ -185,18 +219,18 @@ func (h *handler) answerQuestion(w http.ResponseWriter, r *http.Request) {
 
 	if refused == nil && !underOwnPrefix {
 		// In observe mode, what enforce mode would have refused counts here.
-		defer rq.runAfterAnswer(r.Context())
+		defer rq.countRefusal()
 
 		rq.allow()
 
 		return
 	}
 
-	// The last deferred runs first: runAfterAnswer before addToHistory, so that
-	// a broken refusal limit is in the client's history.
+	// The last deferred runs first: countRefusal before addToHistory, so that a
+	// broken error burst is in the client's history.
 	defer rq.addToHistory()
 	defer rq.countAnomalies()
-	defer rq.runAfterAnswer(r.Context())
+	defer rq.countRefusal()
 
 	if refused != nil {
 		rq.deny(*refused)
@@ -378,7 +412,7 @@ func (h *handler) takeReport(w http.ResponseWriter, r *http.Request) {
 	// Remove reports true to one report only, of several that name the id. A
 	// question still being handled is held as nil.
 	if found && held != nil && h.awaitingReport.Remove(report.RequestID) {
-		h.finishWith(r.Context(), held, report)
+		h.finishWith(held, report)
 	}
 
 	w.WriteHeader(http.StatusNoContent)
@@ -441,11 +475,11 @@ func (report *Report) checkRanges() error {
 
 // finishWith finishes a request with what its report says, and writes the
 // request's last log line, which holds its decision's fields and the report's.
-// For an allowed request it first runs the heuristics of onReport, and adds the
-// request to its client's history, the anomaly counters and the metrics, with
-// the status and bytes the report gives. A denied request's counting was
-// finished at its decision. ctx is the report's own context.
-func (h *handler) finishWith(ctx context.Context, held *decision, report Report) {
+// For an allowed request it first counts the request's bytes, and adds it to its
+// client's history, the anomaly counters and the metrics, with the status and
+// bytes the report gives. A denied request's counting was finished at its
+// decision.
+func (h *handler) finishWith(held *decision, report Report) {
 	rq := &request{
 		decision:     *held,
 		h:            h,
@@ -462,7 +496,7 @@ func (h *handler) finishWith(ctx context.Context, held *decision, report Report)
 	if rq.allowed {
 		rq.line.DurationUpstreamTotal = &report.DurationUpstreamTotal
 
-		rq.runBanningHeuristics(ctx, onReport())
+		rq.countBytes()
 		rq.countAnomalies()
 		rq.addToHistory()
 

internal/servewaf/staticlists_test.go

@@ -104,15 +104,6 @@ func TestDenyNetsRefuseBeforeTheLookup(t *testing.T) {
 	}
 }
 
-func TestDenyNetsRefusalNamesItsHeuristicAndNetblock(t *testing.T) {
-	t.Parallel()
-
-	s, _, _ := startWithClock(t, "", map[string]string{denyNets: clientsNet})
-
-	line := s.get(client, http.StatusForbidden, requestlog.ActionDenied)
-	wantHeuristic(t, line, "deny_nets", `{"netblock": "`+clientsNet+`"}`)
-}
-
 func TestRequestRefusedByDenyNetsIsNotCounted(t *testing.T) {
 	t.Parallel()
 

internal/servewaf/trappaths.go

@@ -1,39 +0,0 @@
-package servewaf
-
-// The heuristic trap_paths. It reads SWWAF_TRAP_PATHS.
-
-import (
-	"context"
-	"slices"
-	"time"
-
-	"sneak.berlin/go/smallwebwaf/internal/bans"
-	"sneak.berlin/go/smallwebwaf/internal/requestlog"
-	"sneak.berlin/go/smallwebwaf/internal/rules"
-)
-
-// trapPaths refuses a request for a path in SWWAF_TRAP_PATHS: its path as a
-// path rule sees it, without the query, as sent or once percent-decoded, is one
-// of them. Such a request is a clear sign of attack, as a ban rule's match is:
-// it bans the client's netblock, or in observe mode raises the alert for the
-// ban it would have made. The ban's notes give the path as sent, and so does
-// its figure.
-type trapPaths struct{}
-
-func (trapPaths) name() string { return "trap_paths" }
-
-func (trapPaths) check(_ context.Context, rq *request, now time.Time) *verdict {
-	path := rules.Path(rq.in)
-	if !slices.Contains(rq.h.config.TrapPaths, path) &&
-		!slices.Contains(rq.h.config.TrapPaths, rules.DecodeOnce(path)) {
-		return nil
-	}
-
-	rq.attack = true
-	rq.banForAttack(now, bans.Notes{TrapPath: path})
-
-	return &verdict{
-		action:  requestlog.ActionBanned,
-		figures: map[string]any{"path": path},
-	}
-}

internal/servewaf/trappaths_test.go

@@ -83,16 +83,6 @@ func TestTrapPathBansAsABanRuleDoes(t *testing.T) {
 	}
 }
 
-func TestTrapPathRefusalNamesItsHeuristicAndPath(t *testing.T) {
-	t.Parallel()
-
-	s, _, _ := startWithClock(t, "", map[string]string{trapPaths: trapPathList})
-
-	line := s.request(client, "/wp-login.php?redirect_to=x", http.StatusForbidden,
-		requestlog.ActionBanned)
-	wantHeuristic(t, line, "trap_paths", `{"path": "/wp-login.php"}`)
-}
-
 func TestTrapPathMatchesThePathDecodedOnce(t *testing.T) {
 	t.Parallel()
 

internal/smallwebwaf/smallwebwaf.go

@@ -29,6 +29,7 @@ import (
 	"sneak.berlin/go/smallwebwaf/internal/rules"
 	"sneak.berlin/go/smallwebwaf/internal/servewaf"
 	"sneak.berlin/go/smallwebwaf/internal/state"
+	"sneak.berlin/go/smallwebwaf/internal/waf"
 )
 
 // shutdownTimeout is how long requests in progress may take to finish
@@ -150,7 +151,14 @@ func RunServeWAF(ctx context.Context, params Params) int {
 		return 1
 	}
 
-	server, err := newServer(cfg, stdout, processLog, now, ruleFiles, alertQueue)
+	crs, err := servewaf.NewCoreRuleSet(cfg)
+	if err != nil {
+		processLog.Error("cannot use the Core Rule Set", "error", err.Error())
+
+		return 1
+	}
+
+	server, err := newServer(cfg, stdout, processLog, now, ruleFiles, alertQueue, crs)
 	if err != nil {
 		processLog.Error("cannot use the lookup database", "error", err.Error())
 
@@ -190,6 +198,7 @@ func RunServeWAF(ctx context.Context, params Params) int {
 func newServer(
 	cfg *config.Config, stdout io.Writer, processLog *slog.Logger,
 	now func() time.Time, ruleFiles *rules.Files, alertQueue *alerts.Queue,
+	crs *waf.CoreRuleSet,
 ) (*servewaf.Server, error) {
 	var lookupFile *lookup.File
 
@@ -214,6 +223,7 @@ func newServer(
 		GeoJSURL:     lookup.URL,
 		AbuseIPDBURL: reputation.AbuseIPDBURL,
 		LookupFile:   lookupFile,
+		CoreRuleSet:  crs,
 		Now:          now,
 		Rules:        ruleFiles,
 		Alerts:       alertQueue,

internal/smallwebwaf/smallwebwaf_test.go

@@ -19,6 +19,7 @@ import (
 	"testing"
 	"time"
 
+	"sneak.berlin/go/smallwebwaf/internal/config"
 	"sneak.berlin/go/smallwebwaf/internal/lookup/lookuptest"
 	"sneak.berlin/go/smallwebwaf/internal/servewaf"
 	"sneak.berlin/go/smallwebwaf/internal/smallwebwaf"
@@ -49,7 +50,7 @@ const (
 	adminSecret = "fedcba9876543210fedcba9876543210"
 	// instance is the SWWAF_INSTANCE_NAME the tests set where they look at
 	// it.
-	instance = "fsn1app1/gitea"
+	instance = "fsn1app1/blog"
 	// greeting is what the tests' app answers.
 	greeting = "hello from the app"
 	// placed is the client the tests' lookup databases place.
@@ -341,8 +342,8 @@ func TestEveryLogLineAndMetricCarriesTheInstanceName(t *testing.T) {
 	// the comments.
 	for line := range strings.Lines(metrics) {
 		if !strings.HasPrefix(line, "#") &&
-			!strings.Contains(line, `instance="fsn1app1/gitea"`) {
-			t.Errorf("series %q, without instance=\"fsn1app1/gitea\"", line)
+			!strings.Contains(line, `instance="fsn1app1/blog"`) {
+			t.Errorf("series %q, without instance=\"fsn1app1/blog\"", line)
 		}
 	}
 }
@@ -551,6 +552,56 @@ func TestRulesDirThatDoesNotExistStopsTheStart(t *testing.T) {
 		": no such file or directory")
 }
 
+func TestCoreRuleSetExclusionsFileThatCannotBeReadStopsTheStart(t *testing.T) {
+	t.Parallel()
+
+	path := filepath.Join(t.TempDir(), "crs-exclusions.conf")
+	out := &output{}
+
+	status := run(t.Context(), map[string]string{
+		listenAddr: localhost + ":0", stateDir: t.TempDir(), rulesDir: t.TempDir(),
+		"SWWAF_CORE_RULE_SET_EXCLUSIONS_FILE": path,
+	}, out)
+	if status != 1 {
+		t.Fatalf("exit status %d, want 1", status)
+	}
+
+	line := out.line(t, "msg", "cannot use the Core Rule Set")
+	want := "SWWAF_CORE_RULE_SET_EXCLUSIONS_FILE: read the exclusions file: open " +
+		path + ": no such file or directory"
+
+	if line["error"] != want {
+		t.Errorf("start refused with %v, want the error %q", line, want)
+	}
+}
+
+func TestCoreRuleSetExclusionsFileThatCannotBeUsedStopsTheStartWhileTheCoreRuleSetIsOff(
+	t *testing.T,
+) {
+	t.Parallel()
+
+	broken := filepath.Join(t.TempDir(), "broken.conf")
+
+	err := os.WriteFile(broken, []byte("SecNoSuchDirective On\n"), 0o600)
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	for _, path := range []string{filepath.Join(t.TempDir(), "missing.conf"), broken} {
+		out := &output{}
+
+		status := run(t.Context(), map[string]string{
+			listenAddr: localhost + ":0", stateDir: t.TempDir(), rulesDir: t.TempDir(),
+			"SWWAF_WAF_MODE": config.WAFModeOff, "SWWAF_CORE_RULE_SET_EXCLUSIONS_FILE": path,
+		}, out)
+		if status != 1 {
+			t.Fatalf("%s: exit status %d, want 1", path, status)
+		}
+
+		out.line(t, "msg", "cannot use the Core Rule Set")
+	}
+}
+
 func TestLookupDatabaseReplacedWhileRunningTakesEffect(t *testing.T) {
 	t.Parallel()
 
@@ -610,9 +661,9 @@ func TestLookupDatabaseReplacedWhileRunningTakesEffect(t *testing.T) {
 		rename(t, replacement, path)
 
 		metrics := metricsWith(t, url+"_smallwebwaf/metrics", token,
-			`smallwebwaf_lookup_database_read_failures_total{instance="fsn1app1/gitea"} 1`)
+			`smallwebwaf_lookup_database_read_failures_total{instance="fsn1app1/blog"} 1`)
 		lastRead = seriesValue(t, metrics,
-			`smallwebwaf_lookup_database_last_read_timestamp_seconds{instance="fsn1app1/gitea"}`)
+			`smallwebwaf_lookup_database_last_read_timestamp_seconds{instance="fsn1app1/blog"}`)
 
 		wantStatus(t, url, placed, http.StatusOK)
 	})
@@ -668,7 +719,7 @@ func TestBlocklistTriesAndCopiesKeptInReputationJSONAcrossRestarts(t *testing.T)
 		// too.
 		rateLimitExemptNets: placed + "," + localhost,
 	}
-	failures := `smallwebwaf_reputation_failures_total{instance="fsn1app1/gitea",` +
+	failures := `smallwebwaf_reputation_failures_total{instance="fsn1app1/blog",` +
 		`source="` + torURL + `"} `
 
 	// tor.txt cannot be fetched at first, which is counted.
@@ -909,8 +960,8 @@ func TestStalledRemoteLogEndpointHoldsUpNoRequest(t *testing.T) {
 		// last.
 		metrics := metricsText(t, url+"_smallwebwaf/metrics", token)
 		for _, series := range []string{
-			`smallwebwaf_remote_log_lines_sent_total{instance="fsn1app1/gitea"} 0`,
-			`smallwebwaf_remote_log_buffer_depth{instance="fsn1app1/gitea"} 1`,
+			`smallwebwaf_remote_log_lines_sent_total{instance="fsn1app1/blog"} 0`,
+			`smallwebwaf_remote_log_buffer_depth{instance="fsn1app1/blog"} 1`,
 		} {
 			if !strings.Contains(metrics, "\n"+series+"\n") {
 				t.Errorf("no %q in the metrics:\n%s", series, metrics)
@@ -918,7 +969,7 @@ func TestStalledRemoteLogEndpointHoldsUpNoRequest(t *testing.T) {
 		}
 
 		const dropped = "\nsmallwebwaf_remote_log_lines_dropped_total" +
-			`{instance="fsn1app1/gitea"} `
+			`{instance="fsn1app1/blog"} `
 		if strings.Contains(metrics, dropped+"0\n") || !strings.Contains(metrics, dropped) {
 			t.Errorf("no line dropped in the metrics:\n%s", metrics)
 		}
@@ -1011,7 +1062,7 @@ func TestBanIsAlertedAndAnAlertNotSentIsKeptAcrossARestart(t *testing.T) {
 	runUntilStopped(t, env, func(url string) {
 		webhook.waitFor(t, "permanent_ban", true)
 
-		const ofWebhook = `{destination="webhook",instance="fsn1app1/gitea"}`
+		const ofWebhook = `{destination="webhook",instance="fsn1app1/blog"}`
 
 		metrics := metricsWith(t, url+"_smallwebwaf/metrics", token,
 			"\nsmallwebwaf_alerts_sent_total"+ofWebhook+" 1\n")
@@ -1062,13 +1113,13 @@ func TestBanIsAlertedToSlackAndNtfy(t *testing.T) {
 		slackPost := slack.firstPost(t)
 		err := json.Unmarshal([]byte(slackPost.body), &message)
 
-		if err != nil || !strings.HasPrefix(message.Text, "*fsn1app1/gitea: ban*\n") ||
+		if err != nil || !strings.HasPrefix(message.Text, "*fsn1app1/blog: ban*\n") ||
 			!strings.Contains(message.Text, "\nclient: "+client+"\n") {
 			t.Errorf("Slack was sent %s", slackPost.body)
 		}
 
 		ntfyPost := ntfy.firstPost(t)
-		if ntfyPost.header.Get("Title") != "fsn1app1/gitea: ban" ||
+		if ntfyPost.header.Get("Title") != "fsn1app1/blog: ban" ||
 			ntfyPost.header.Get("Authorization") != "Bearer "+ntfyToken ||
 			!strings.Contains(ntfyPost.body, "\nclient: "+client+"\n") {
 			t.Errorf("ntfy was sent %s, with the headers %v", ntfyPost.body,
@@ -1080,9 +1131,9 @@ func TestBanIsAlertedToSlackAndNtfy(t *testing.T) {
 		// test process cannot fail the test.
 		sent := []string{
 			"\nsmallwebwaf_alerts_sent_total{destination=\"slack\"," +
-				"instance=\"fsn1app1/gitea\"} 1\n",
+				"instance=\"fsn1app1/blog\"} 1\n",
 			"\nsmallwebwaf_alerts_sent_total{destination=\"ntfy\"," +
-				"instance=\"fsn1app1/gitea\"} 1\n",
+				"instance=\"fsn1app1/blog\"} 1\n",
 		}
 
 		metrics := metricsWith(t, url+"_smallwebwaf/metrics", token, sent...)

internal/state/state_test.go

@@ -143,7 +143,7 @@ const filledAlertsJSON = `{
     "waiting": {
         "webhook": [
             {
-                "instance": "fsn1app1/gitea",
+                "instance": "fsn1app1/blog",
                 "time": "2026-10-06T00:00:00Z",
                 "event": "ban",
                 "client": "203.0.113.9",
@@ -158,7 +158,7 @@ const filledAlertsJSON = `{
                 "suppressed_repeats": 0
             },
             {
-                "instance": "fsn1app1/gitea",
+                "instance": "fsn1app1/blog",
                 "time": "2026-10-06T00:00:00Z",
                 "event": "file_error",
                 "client": "",
@@ -1721,7 +1721,7 @@ func newParams(dir string) state.Params {
 		Events:     alerts.Events(),
 		Cooldown:   15 * time.Minute,
 		MaxPerHour: 2,
-		Instance:   "fsn1app1/gitea",
+		Instance:   "fsn1app1/blog",
 		Now:        midnight,
 	})
 

internal/waf/gitea.conf

@@ -0,0 +1,283 @@
+# The eighth change: on gitea's paths, some fields skip the rules that refused
+# ordinary gitea requests there. They are the fields where gitea sends a search,
+# a file name or a branch name. Each exclusion runs with the request, before the
+# rules it switches off, those of phase 1 included, so this file is loaded before
+# the Core Rule Set's rules. Each comment names a request the rule refused.
+
+# gitea's searches of code, of issues and pull requests, and of commits send the
+# text searched for in q, which skips these rules there:
+#   930110: ../
+#   930120: .gitignore
+#   931100: http://127.0.0.1:8080
+#   932120: Invoke-WebRequest
+#   932130: $(pwd)
+#   932140: if (a == b) {
+#   932160: /bin/sh
+#   932235: `make check`
+#   932250: ls -la
+#   932260: python3
+#   932380: `whoami`
+#   933100: <?php echo
+#   933130: $_GET[
+#   933135: ${VAR}
+#   934100: process.env
+#   934110: http://127.0.0.1:8080
+#   934130: __proto__
+#   941100: <script>
+#   941110: <script>
+#   941160: <img src=
+#   941180: document.cookie
+#   941390: fetch(
+#   942100: SELECT * FROM users WHERE
+#   942140: information_schema
+#   942190: union select
+#   942230: if (a == b) {
+#   944100: java.lang.Runtime
+#   944110: java.lang.Runtime
+#   944130: java.lang.Runtime
+SecRule REQUEST_FILENAME "@rx ^/(?:explore/code|issues(?:/search)?|pulls|\
+    [^/]+/-/code|\
+    [^/]+/[^/]+/(?:search|issues(?:/search)?|pulls|\
+    commits/(?:branch|tag|commit)/.+/search)|\
+    api/v1/repos/(?:issues/search|[^/]+/[^/]+/issues))$" \
+    "id:900600,phase:1,pass,nolog,\
+    ctl:ruleRemoveTargetById=930110;ARGS:q,\
+    ctl:ruleRemoveTargetById=930120;ARGS:q,\
+    ctl:ruleRemoveTargetById=931100;ARGS:q,\
+    ctl:ruleRemoveTargetById=932120;ARGS:q,\
+    ctl:ruleRemoveTargetById=932130;ARGS:q,\
+    ctl:ruleRemoveTargetById=932140;ARGS:q,\
+    ctl:ruleRemoveTargetById=932160;ARGS:q,\
+    ctl:ruleRemoveTargetById=932235;ARGS:q,\
+    ctl:ruleRemoveTargetById=932250;ARGS:q,\
+    ctl:ruleRemoveTargetById=932260;ARGS:q,\
+    ctl:ruleRemoveTargetById=932380;ARGS:q,\
+    ctl:ruleRemoveTargetById=933100;ARGS:q,\
+    ctl:ruleRemoveTargetById=933130;ARGS:q,\
+    ctl:ruleRemoveTargetById=933135;ARGS:q,\
+    ctl:ruleRemoveTargetById=934100;ARGS:q,\
+    ctl:ruleRemoveTargetById=934110;ARGS:q,\
+    ctl:ruleRemoveTargetById=934130;ARGS:q,\
+    ctl:ruleRemoveTargetById=941100;ARGS:q,\
+    ctl:ruleRemoveTargetById=941110;ARGS:q,\
+    ctl:ruleRemoveTargetById=941160;ARGS:q,\
+    ctl:ruleRemoveTargetById=941180;ARGS:q,\
+    ctl:ruleRemoveTargetById=941390;ARGS:q,\
+    ctl:ruleRemoveTargetById=942100;ARGS:q,\
+    ctl:ruleRemoveTargetById=942140;ARGS:q,\
+    ctl:ruleRemoveTargetById=942190;ARGS:q,\
+    ctl:ruleRemoveTargetById=942230;ARGS:q,\
+    ctl:ruleRemoveTargetById=944100;ARGS:q,\
+    ctl:ruleRemoveTargetById=944110;ARGS:q,\
+    ctl:ruleRemoveTargetById=944130;ARGS:q"
+
+# A page opened from the results of one of those searches has the search's
+# address in Referer, which skips these rules then:
+#   941110: <script>
+#   941120: onClick={
+#   941160: <img src=
+#   942100: LIKE '%foo%'
+#   944100: java.lang.Runtime
+SecRule REQUEST_HEADERS:Referer "@rx ^https?://[^/]+/(?:explore/code|\
+    issues(?:/search)?|pulls|[^/]+/-/code|\
+    [^/]+/[^/]+/(?:search|issues(?:/search)?|pulls|\
+    commits/(?:branch|tag|commit)/.+/search)|\
+    api/v1/repos/(?:issues/search|[^/]+/[^/]+/issues))\?" \
+    "id:900601,phase:1,pass,nolog,\
+    ctl:ruleRemoveTargetById=941110;REQUEST_HEADERS:Referer,\
+    ctl:ruleRemoveTargetById=941120;REQUEST_HEADERS:Referer,\
+    ctl:ruleRemoveTargetById=941160;REQUEST_HEADERS:Referer,\
+    ctl:ruleRemoveTargetById=942100;REQUEST_HEADERS:Referer,\
+    ctl:ruleRemoveTargetById=944100;REQUEST_HEADERS:Referer"
+
+# gitea's searches of repositories, users, branches, tags and packages send a
+# name in q, which skips these rules there:
+#   930120: .profile
+#   932120: powershell-scripts
+#   932260: python3-app
+#   944130: org.apache.commons.logging
+SecRule REQUEST_FILENAME "@rx ^/(?:explore/repos|user/search_candidates|\
+    [^/]+/-/packages|[^/]+/[^/]+/(?:branches|tags)|api/v1/repos/search)$" \
+    "id:900602,phase:1,pass,nolog,\
+    ctl:ruleRemoveTargetById=930120;ARGS:q,\
+    ctl:ruleRemoveTargetById=932120;ARGS:q,\
+    ctl:ruleRemoveTargetById=932260;ARGS:q,\
+    ctl:ruleRemoveTargetById=944130;ARGS:q"
+
+# gitea's other searches for a name send it in q too, which skips only these
+# rules there:
+#   930120: .profile
+#   932120: powershell-scripts
+#   932260: python3-app
+# The searches:
+#   - the dashboard's filter of repositories;
+#   - the repositories on a user's or an organisation's page, whose path has
+#     one segment;
+#   - the author filter of the issue and pull request lists;
+#   - the lists of users and organisations, and the API's search for users.
+SecRule REQUEST_FILENAME "@rx ^/(?:[^/]+|repo/search|\
+    explore/(?:users|organizations)|api/v1/users/search|\
+    [^/]+/[^/]+/(?:issues|pulls)/posters)$" \
+    "id:900603,phase:1,pass,nolog,\
+    ctl:ruleRemoveTargetById=930120;ARGS:q,\
+    ctl:ruleRemoveTargetById=932120;ARGS:q,\
+    ctl:ruleRemoveTargetById=932260;ARGS:q"
+
+# These requests name a file in the path, which skips these rules there:
+#   920500: notes.txt~
+#   934100: process.env.d.ts
+#   941130: docs/a b.xhtml
+#   944130: java.lang.String.md
+# The requests:
+#   - a file's page, raw file and download;
+#   - its blame, history, edit, preview and delete pages;
+#   - the API's call for its contents;
+#   - a release attachment's download.
+SecRule REQUEST_FILENAME \
+    "@rx ^/(?:api/v1/repos/)?[^/]+/[^/]+/(?:src|raw|media|blame|commits|_edit|_preview|_delete|contents|releases/download)/" \
+    "id:900610,phase:1,pass,nolog,\
+    ctl:ruleRemoveTargetById=920500;REQUEST_FILENAME,\
+    ctl:ruleRemoveTargetById=934100;REQUEST_FILENAME,\
+    ctl:ruleRemoveTargetById=941130;REQUEST_FILENAME,\
+    ctl:ruleRemoveTargetById=944130;REQUEST_FILENAME"
+
+# The requests below name a file in a query parameter. These rules refused
+# them for the file named:
+#   930120: .gitignore
+#   932120: install-script.sh
+#   932130: [draft].md
+#   932160: bin/docker-entrypoint
+#   932260: docker-compose.yml
+#   934100: process.env.d.ts
+#   934130: __proto__.json
+#   941130: index.xhtml
+#   941180: document.write.js
+#   942140: information_schema.sql
+#   944110: java/lang/Runtime.java
+#   944130: java.lang.String.md
+# Each request skips the rules that refused it. The fourth change already has
+# path and redirect_to skip 930120, 932160 and 932260 on every path.
+
+# A file's commit graph, in file.
+SecRule REQUEST_FILENAME "@rx ^/[^/]+/[^/]+/graph$" \
+    "id:900620,phase:1,pass,nolog,\
+    ctl:ruleRemoveTargetById=930120;ARGS:file,\
+    ctl:ruleRemoveTargetById=932120;ARGS:file,\
+    ctl:ruleRemoveTargetById=932160;ARGS:file,\
+    ctl:ruleRemoveTargetById=932260;ARGS:file,\
+    ctl:ruleRemoveTargetById=934100;ARGS:file,\
+    ctl:ruleRemoveTargetById=934130;ARGS:file,\
+    ctl:ruleRemoveTargetById=941130;ARGS:file,\
+    ctl:ruleRemoveTargetById=941180;ARGS:file,\
+    ctl:ruleRemoveTargetById=942140;ARGS:file,\
+    ctl:ruleRemoveTargetById=944110;ARGS:file,\
+    ctl:ruleRemoveTargetById=944130;ARGS:file"
+
+# The API's list of a file's commits, in path.
+SecRule REQUEST_FILENAME "@rx ^/api/v1/repos/[^/]+/[^/]+/commits$" \
+    "id:900621,phase:1,pass,nolog,\
+    ctl:ruleRemoveTargetById=932120;ARGS:path,\
+    ctl:ruleRemoveTargetById=934100;ARGS:path,\
+    ctl:ruleRemoveTargetById=934130;ARGS:path,\
+    ctl:ruleRemoveTargetById=941130;ARGS:path,\
+    ctl:ruleRemoveTargetById=941180;ARGS:path,\
+    ctl:ruleRemoveTargetById=942140;ARGS:path,\
+    ctl:ruleRemoveTargetById=944110;ARGS:path,\
+    ctl:ruleRemoveTargetById=944130;ARGS:path"
+
+# The API's call for the contents of several files, in body, as JSON.
+SecRule REQUEST_FILENAME "@rx ^/api/v1/repos/[^/]+/[^/]+/file-contents$" \
+    "id:900622,phase:1,pass,nolog,\
+    ctl:ruleRemoveTargetById=930120;ARGS:body,\
+    ctl:ruleRemoveTargetById=932120;ARGS:body,\
+    ctl:ruleRemoveTargetById=932160;ARGS:body,\
+    ctl:ruleRemoveTargetById=934100;ARGS:body,\
+    ctl:ruleRemoveTargetById=934130;ARGS:body,\
+    ctl:ruleRemoveTargetById=941130;ARGS:body,\
+    ctl:ruleRemoveTargetById=941180;ARGS:body,\
+    ctl:ruleRemoveTargetById=942140;ARGS:body,\
+    ctl:ruleRemoveTargetById=944110;ARGS:body,\
+    ctl:ruleRemoveTargetById=944130;ARGS:body"
+
+# An issue opened from a template, in template.
+SecRule REQUEST_FILENAME "@rx ^/[^/]+/[^/]+/issues/new$" \
+    "id:900623,phase:1,pass,nolog,\
+    ctl:ruleRemoveTargetById=930120;ARGS:template,\
+    ctl:ruleRemoveTargetById=932120;ARGS:template,\
+    ctl:ruleRemoveTargetById=932130;ARGS:template,\
+    ctl:ruleRemoveTargetById=932160;ARGS:template,\
+    ctl:ruleRemoveTargetById=932260;ARGS:template,\
+    ctl:ruleRemoveTargetById=934100;ARGS:template,\
+    ctl:ruleRemoveTargetById=934130;ARGS:template,\
+    ctl:ruleRemoveTargetById=941130;ARGS:template,\
+    ctl:ruleRemoveTargetById=941180;ARGS:template,\
+    ctl:ruleRemoveTargetById=942140;ARGS:template,\
+    ctl:ruleRemoveTargetById=944110;ARGS:template,\
+    ctl:ruleRemoveTargetById=944130;ARGS:template"
+
+# The sign-in page on the way to a file's edit page, in redirect_to.
+SecRule REQUEST_FILENAME "@rx ^/user/login$" \
+    "id:900624,phase:1,pass,nolog,\
+    ctl:ruleRemoveTargetById=932120;ARGS:redirect_to,\
+    ctl:ruleRemoveTargetById=932130;ARGS:redirect_to,\
+    ctl:ruleRemoveTargetById=934100;ARGS:redirect_to,\
+    ctl:ruleRemoveTargetById=934130;ARGS:redirect_to,\
+    ctl:ruleRemoveTargetById=941130;ARGS:redirect_to,\
+    ctl:ruleRemoveTargetById=941180;ARGS:redirect_to,\
+    ctl:ruleRemoveTargetById=942140;ARGS:redirect_to,\
+    ctl:ruleRemoveTargetById=944110;ARGS:redirect_to,\
+    ctl:ruleRemoveTargetById=944130;ARGS:redirect_to"
+
+# An attachment uploaded through the API to a release, an issue or a comment,
+# in name.
+SecRule REQUEST_FILENAME \
+    "@rx ^/api/v1/repos/[^/]+/[^/]+/(?:releases|issues|issues/comments)/[0-9]+/assets$" \
+    "id:900625,phase:1,pass,nolog,\
+    ctl:ruleRemoveTargetById=930120;ARGS:name,\
+    ctl:ruleRemoveTargetById=932120;ARGS:name,\
+    ctl:ruleRemoveTargetById=932260;ARGS:name,\
+    ctl:ruleRemoveTargetById=934100;ARGS:name,\
+    ctl:ruleRemoveTargetById=934130;ARGS:name,\
+    ctl:ruleRemoveTargetById=941130;ARGS:name,\
+    ctl:ruleRemoveTargetById=941180;ARGS:name,\
+    ctl:ruleRemoveTargetById=942140;ARGS:name,\
+    ctl:ruleRemoveTargetById=944130;ARGS:name"
+
+# A diff's hidden lines, fetched when shown, in path.
+SecRule REQUEST_FILENAME "@rx ^/[^/]+/[^/]+/blob_excerpt/[0-9a-f]+$" \
+    "id:900626,phase:1,pass,nolog,\
+    ctl:ruleRemoveTargetById=932120;ARGS:path,\
+    ctl:ruleRemoveTargetById=934100;ARGS:path,\
+    ctl:ruleRemoveTargetById=934130;ARGS:path,\
+    ctl:ruleRemoveTargetById=941130;ARGS:path,\
+    ctl:ruleRemoveTargetById=941180;ARGS:path,\
+    ctl:ruleRemoveTargetById=942140;ARGS:path,\
+    ctl:ruleRemoveTargetById=944110;ARGS:path,\
+    ctl:ruleRemoveTargetById=944130;ARGS:path"
+
+# The requests below name a branch or tag in a query parameter, which skips
+# the list of command names (932260) there. It refused names such as
+# docker-build, python3-migration and feat/docker-support.
+
+# Deleting or restoring a branch, in name.
+SecRule REQUEST_FILENAME "@rx ^/[^/]+/[^/]+/branches/(?:delete|restore)$" \
+    "id:900630,phase:1,pass,nolog,ctl:ruleRemoveTargetById=932260;ARGS:name"
+
+# A release started from a tag, in tag.
+SecRule REQUEST_FILENAME "@rx ^/[^/]+/[^/]+/releases/new$" \
+    "id:900631,phase:1,pass,nolog,ctl:ruleRemoveTargetById=932260;ARGS:tag"
+
+# A branch protection rule opened for editing, in rule_name.
+SecRule REQUEST_FILENAME "@rx ^/[^/]+/[^/]+/settings/branches/edit$" \
+    "id:900632,phase:1,pass,nolog,ctl:ruleRemoveTargetById=932260;ARGS:rule_name"
+
+# A directory listing's last commits, in refSubUrl.
+SecRule REQUEST_FILENAME "@rx ^/[^/]+/[^/]+/lastcommit/" \
+    "id:900633,phase:1,pass,nolog,ctl:ruleRemoveTargetById=932260;ARGS:refSubUrl"
+
+# An artifact upload from actions/upload-artifact@v3 sends the header
+# Content-Range, which the Core Rule Set refused (920450).
+SecRule REQUEST_FILENAME \
+    "@rx ^/api/actions_pipeline/_apis/pipelines/workflows/[0-9]+/artifacts/[^/]+/upload$" \
+    "id:900640,phase:1,pass,nolog,\
+    ctl:ruleRemoveTargetById=920450;REQUEST_HEADERS_NAMES:Content-Range"

internal/waf/testdata/gitea-requests.txt

@@ -0,0 +1,393 @@
+# Ordinary gitea 1.27 requests that the Core Rule Set must let through at the
+# defaults. Each line is a path and query, and may end with one header after a
+# space. The tests of internal/waf inspect each as a GET. The Core Rule Set reads
+# the query and the headers the same way for any method.
+
+# Searches with ordinary words and symbols.
+/owner/repo/search?q=package.json
+/owner/repo/search?q=.gitignore
+/owner/repo/search?q=docker-compose.yml
+/owner/repo/search?q=python3
+/owner/repo/search?q=ssh%20key
+/owner/repo/search?q=feat%2Fdocker-support
+/owner/repo/search?q=ls%20-la
+/owner/repo/search?q=sed%20-i
+/owner/repo/search?q=%2Fbin%2Fsh
+/owner/repo/search?q=%60make%20check%60
+/owner/repo/search?q=%60whoami%60
+/owner/repo/search?q=fetch%28
+/owner/repo/search?q=%24%7BVAR%7D
+/owner/repo/search?q=%24%28pwd%29
+/owner/repo/search?q=process.env
+/owner/repo/search?q=%3Cimg%20src%3D
+/owner/repo/search?q=%3Cscript%3E
+/owner/repo/search?q=SELECT%20%2A%20FROM%20users%20WHERE
+/owner/repo/search?q=union%20select
+/owner/repo/search?q=http%3A%2F%2F127.0.0.1%3A8080
+/owner/repo/search?q=..%2F
+/owner/repo/search?q=%2Fetc%2Fpasswd
+/owner/repo/search?q=eval%28
+/owner/repo/search?q=chmod%20%2Bx
+/owner/repo/search?q=echo%20%24PATH
+/owner/repo/search?q=java.lang.Runtime
+/owner/repo/search?q=document.cookie
+/owner/repo/search?q=alert%281%29
+/owner/repo/search?q=__proto__
+/owner/repo/search?q=C%3A%5CWindows%5CSystem32
+/owner/repo/search?q=Invoke-WebRequest
+/owner/repo/search?q=if%20%28a%20%3D%3D%20b%29%20%7B
+/owner/repo/search?q=sudo%20apt%20install
+/owner/repo/search?q=~%2F.ssh%2Fconfig
+/owner/repo/search?q=.htaccess
+/owner/repo/search?q=%24_GET%5B
+/owner/repo/search?q=%24_POST
+/owner/repo/search?q=%24_SERVER%5B%27REQUEST_URI%27%5D
+/owner/repo/search?q=%3C%3Fphp%20echo
+/owner/repo/search?q=information_schema
+/owner/repo/search?q=LIKE%20%27%25foo%25%27
+/owner/repo/search?q=onClick%3D%7B
+/explore/code?q=SELECT%20%2A%20FROM%20users%20WHERE
+/explore/code?q=%3Cimg%20src%3D
+/owner/-/code?q=SELECT%20%2A%20FROM%20users%20WHERE
+/owner/-/code?q=%3Cimg%20src%3D
+/owner/repo/issues?type=all&state=open&q=SELECT%20%2A%20FROM%20users%20WHERE
+/owner/repo/issues?type=all&state=open&q=%3Cimg%20src%3D
+/owner/repo/issues/search?q=SELECT%20%2A%20FROM%20users%20WHERE
+/owner/repo/issues/search?q=%3Cimg%20src%3D
+/owner/repo/pulls?q=SELECT%20%2A%20FROM%20users%20WHERE
+/owner/repo/pulls?q=%3Cimg%20src%3D
+/issues?type=your_repositories&q=SELECT%20%2A%20FROM%20users%20WHERE
+/issues?type=your_repositories&q=%3Cimg%20src%3D
+/issues/search?q=SELECT%20%2A%20FROM%20users%20WHERE
+/issues/search?q=%3Cimg%20src%3D
+/pulls?type=your_repositories&q=SELECT%20%2A%20FROM%20users%20WHERE
+/pulls?type=your_repositories&q=%3Cimg%20src%3D
+/owner/repo/commits/branch/main/search?q=SELECT%20%2A%20FROM%20users%20WHERE
+/owner/repo/commits/branch/main/search?q=%3Cimg%20src%3D
+/api/v1/repos/issues/search?q=SELECT%20%2A%20FROM%20users%20WHERE
+/api/v1/repos/issues/search?q=%3Cimg%20src%3D
+/api/v1/repos/owner/repo/issues?q=SELECT%20%2A%20FROM%20users%20WHERE
+/api/v1/repos/owner/repo/issues?q=%3Cimg%20src%3D
+
+# Searches for the names of repositories, users, branches, tags and packages.
+/explore/repos?q=python3-app
+/explore/repos?q=.profile
+/explore/repos?q=powershell-scripts
+/api/v1/repos/search?q=docker-build
+/user/search_candidates?q=docker-ci
+/owner/repo/branches?q=feat%2Fdocker-support
+/owner/repo/tags?q=docker-v1.0
+/owner/-/packages?q=python3-requests
+/owner/-/packages?q=org.apache.commons.logging
+/repo/search?q=python3-app
+/repo/search?q=docker-build
+/repo/search?q=powershell-scripts
+/repo/search?q=.profile
+/owner?tab=repositories&q=python3-app
+/org?q=python3-app
+/owner/repo/issues/posters?q=docker-ci
+/owner/repo/pulls/posters?q=docker-ci
+/explore/users?q=docker-ci
+/explore/organizations?q=docker-ci
+/api/v1/users/search?q=docker-ci
+
+# Pages, raw files and edit pages of files, and the API's call for their
+# contents.
+/owner/repo/src/branch/main/package.json
+/owner/repo/raw/branch/main/package.json
+/owner/repo/_edit/main/package.json
+/api/v1/repos/owner/repo/contents/package.json
+/owner/repo/src/branch/main/.gitignore
+/owner/repo/raw/branch/main/.gitignore
+/owner/repo/_edit/main/.gitignore
+/api/v1/repos/owner/repo/contents/.gitignore
+/owner/repo/src/branch/main/docker-compose.yml
+/owner/repo/raw/branch/main/docker-compose.yml
+/owner/repo/_edit/main/docker-compose.yml
+/api/v1/repos/owner/repo/contents/docker-compose.yml
+/owner/repo/src/branch/main/Dockerfile
+/owner/repo/raw/branch/main/Dockerfile
+/owner/repo/_edit/main/Dockerfile
+/api/v1/repos/owner/repo/contents/Dockerfile
+/owner/repo/src/branch/main/.htaccess
+/owner/repo/raw/branch/main/.htaccess
+/owner/repo/_edit/main/.htaccess
+/api/v1/repos/owner/repo/contents/.htaccess
+/owner/repo/src/branch/main/rootfs/etc/passwd
+/owner/repo/raw/branch/main/rootfs/etc/passwd
+/owner/repo/_edit/main/rootfs/etc/passwd
+/api/v1/repos/owner/repo/contents/rootfs/etc/passwd
+/owner/repo/src/branch/main/bin/docker-entrypoint
+/owner/repo/raw/branch/main/bin/docker-entrypoint
+/owner/repo/_edit/main/bin/docker-entrypoint
+/api/v1/repos/owner/repo/contents/bin/docker-entrypoint
+/owner/repo/src/branch/main/scripts/python3-setup.sh
+/owner/repo/raw/branch/main/scripts/python3-setup.sh
+/owner/repo/_edit/main/scripts/python3-setup.sh
+/api/v1/repos/owner/repo/contents/scripts/python3-setup.sh
+/owner/repo/src/branch/main/src/java.base/share/classes/java/lang/Runtime.java
+/owner/repo/raw/branch/main/src/java.base/share/classes/java/lang/Runtime.java
+/owner/repo/_edit/main/src/java.base/share/classes/java/lang/Runtime.java
+/api/v1/repos/owner/repo/contents/src/java.base/share/classes/java/lang/Runtime.java
+/owner/repo/src/branch/main/java.lang.String.md
+/owner/repo/raw/branch/main/java.lang.String.md
+/owner/repo/_edit/main/java.lang.String.md
+/api/v1/repos/owner/repo/contents/java.lang.String.md
+/owner/repo/src/branch/main/META-INF/services/org.apache.commons.logging.LogFactory
+/owner/repo/raw/branch/main/META-INF/services/org.apache.commons.logging.LogFactory
+/owner/repo/_edit/main/META-INF/services/org.apache.commons.logging.LogFactory
+/api/v1/repos/owner/repo/contents/META-INF/services/org.apache.commons.logging.LogFactory
+/owner/repo/src/branch/main/process.env.d.ts
+/owner/repo/raw/branch/main/process.env.d.ts
+/owner/repo/_edit/main/process.env.d.ts
+/api/v1/repos/owner/repo/contents/process.env.d.ts
+/owner/repo/src/branch/main/document.write.js
+/owner/repo/raw/branch/main/document.write.js
+/owner/repo/_edit/main/document.write.js
+/api/v1/repos/owner/repo/contents/document.write.js
+/owner/repo/src/branch/main/test/fixtures/__proto__.json
+/owner/repo/raw/branch/main/test/fixtures/__proto__.json
+/owner/repo/_edit/main/test/fixtures/__proto__.json
+/api/v1/repos/owner/repo/contents/test/fixtures/__proto__.json
+/owner/repo/src/branch/main/install-script.sh
+/owner/repo/raw/branch/main/install-script.sh
+/owner/repo/_edit/main/install-script.sh
+/api/v1/repos/owner/repo/contents/install-script.sh
+/owner/repo/src/branch/main/src/backend/catalog/information_schema.sql
+/owner/repo/raw/branch/main/src/backend/catalog/information_schema.sql
+/owner/repo/_edit/main/src/backend/catalog/information_schema.sql
+/api/v1/repos/owner/repo/contents/src/backend/catalog/information_schema.sql
+/owner/repo/src/branch/main/docs/a%20b.xhtml
+/owner/repo/raw/branch/main/docs/a%20b.xhtml
+/owner/repo/_edit/main/docs/a%20b.xhtml
+/api/v1/repos/owner/repo/contents/docs/a%20b.xhtml
+/owner/repo/src/branch/main/%5Bdraft%5D.md
+/owner/repo/raw/branch/main/%5Bdraft%5D.md
+/owner/repo/_edit/main/%5Bdraft%5D.md
+/api/v1/repos/owner/repo/contents/%5Bdraft%5D.md
+/owner/repo/src/branch/main/notes.txt~
+/owner/repo/raw/branch/main/notes.txt~
+/owner/repo/_edit/main/notes.txt~
+/api/v1/repos/owner/repo/contents/notes.txt~
+
+# The download, blame, history, delete and preview pages of the files above
+# whose names the Core Rule Set checks in the path, and their downloads as
+# release attachments.
+/owner/repo/media/branch/main/notes.txt~
+/owner/repo/blame/branch/main/notes.txt~
+/owner/repo/commits/branch/main/notes.txt~
+/owner/repo/_delete/main/notes.txt~
+/owner/repo/media/branch/main/process.env.d.ts
+/owner/repo/blame/branch/main/process.env.d.ts
+/owner/repo/commits/branch/main/process.env.d.ts
+/owner/repo/_delete/main/process.env.d.ts
+/owner/repo/media/branch/main/docs/a%20b.xhtml
+/owner/repo/blame/branch/main/docs/a%20b.xhtml
+/owner/repo/commits/branch/main/docs/a%20b.xhtml
+/owner/repo/_delete/main/docs/a%20b.xhtml
+/owner/repo/media/branch/main/java.lang.String.md
+/owner/repo/blame/branch/main/java.lang.String.md
+/owner/repo/commits/branch/main/java.lang.String.md
+/owner/repo/_delete/main/java.lang.String.md
+/owner/repo/_preview/main/notes.txt~
+/owner/repo/_preview/main/process.env.d.ts
+/owner/repo/_preview/main/java.lang.String.md
+/owner/repo/releases/download/v1.0/notes.txt~
+/owner/repo/releases/download/v1.0/process.env.d.ts
+/owner/repo/releases/download/v1.0/java.lang.String.md
+/owner/repo/releases/download/v1.0/a%20b.xhtml
+
+# File names in the query string: the commit graph of a file, the API's lists
+# of its commits and of its contents, an issue opened from a template, the
+# sign-in page on the way to its edit page, and a diff's hidden lines.
+/owner/repo/graph?file=package.json
+/api/v1/repos/owner/repo/commits?path=package.json
+/api/v1/repos/owner/repo/file-contents?body=%7B%22files%22%3A%5B%22package.json%22%5D%7D
+/owner/repo/issues/new?template=.gitea%2FISSUE_TEMPLATE%2Fpackage.json
+/user/login?redirect_to=%2Fowner%2Frepo%2F_edit%2Fmain%2Fpackage.json
+/owner/repo/graph?file=.gitignore
+/api/v1/repos/owner/repo/commits?path=.gitignore
+/api/v1/repos/owner/repo/file-contents?body=%7B%22files%22%3A%5B%22.gitignore%22%5D%7D
+/owner/repo/issues/new?template=.gitea%2FISSUE_TEMPLATE%2F.gitignore
+/user/login?redirect_to=%2Fowner%2Frepo%2F_edit%2Fmain%2F.gitignore
+/owner/repo/graph?file=docker-compose.yml
+/api/v1/repos/owner/repo/commits?path=docker-compose.yml
+/api/v1/repos/owner/repo/file-contents?body=%7B%22files%22%3A%5B%22docker-compose.yml%22%5D%7D
+/owner/repo/issues/new?template=.gitea%2FISSUE_TEMPLATE%2Fdocker-compose.yml
+/user/login?redirect_to=%2Fowner%2Frepo%2F_edit%2Fmain%2Fdocker-compose.yml
+/owner/repo/graph?file=.htaccess
+/api/v1/repos/owner/repo/commits?path=.htaccess
+/api/v1/repos/owner/repo/file-contents?body=%7B%22files%22%3A%5B%22.htaccess%22%5D%7D
+/owner/repo/issues/new?template=.gitea%2FISSUE_TEMPLATE%2F.htaccess
+/user/login?redirect_to=%2Fowner%2Frepo%2F_edit%2Fmain%2F.htaccess
+/owner/repo/graph?file=rootfs%2Fetc%2Fpasswd
+/api/v1/repos/owner/repo/commits?path=rootfs%2Fetc%2Fpasswd
+/api/v1/repos/owner/repo/file-contents?body=%7B%22files%22%3A%5B%22rootfs%2Fetc%2Fpasswd%22%5D%7D
+/owner/repo/issues/new?template=.gitea%2FISSUE_TEMPLATE%2Frootfs%2Fetc%2Fpasswd
+/user/login?redirect_to=%2Fowner%2Frepo%2F_edit%2Fmain%2Frootfs%2Fetc%2Fpasswd
+/owner/repo/graph?file=bin%2Fdocker-entrypoint
+/api/v1/repos/owner/repo/commits?path=bin%2Fdocker-entrypoint
+/api/v1/repos/owner/repo/file-contents?body=%7B%22files%22%3A%5B%22bin%2Fdocker-entrypoint%22%5D%7D
+/owner/repo/issues/new?template=.gitea%2FISSUE_TEMPLATE%2Fbin%2Fdocker-entrypoint
+/user/login?redirect_to=%2Fowner%2Frepo%2F_edit%2Fmain%2Fbin%2Fdocker-entrypoint
+/owner/repo/graph?file=scripts%2Fpython3-setup.sh
+/api/v1/repos/owner/repo/commits?path=scripts%2Fpython3-setup.sh
+/api/v1/repos/owner/repo/file-contents?body=%7B%22files%22%3A%5B%22scripts%2Fpython3-setup.sh%22%5D%7D
+/owner/repo/issues/new?template=.gitea%2FISSUE_TEMPLATE%2Fscripts%2Fpython3-setup.sh
+/user/login?redirect_to=%2Fowner%2Frepo%2F_edit%2Fmain%2Fscripts%2Fpython3-setup.sh
+/owner/repo/graph?file=src%2Fjava.base%2Fshare%2Fclasses%2Fjava%2Flang%2FRuntime.java
+/api/v1/repos/owner/repo/commits?path=src%2Fjava.base%2Fshare%2Fclasses%2Fjava%2Flang%2FRuntime.java
+/api/v1/repos/owner/repo/file-contents?body=%7B%22files%22%3A%5B%22src%2Fjava.base%2Fshare%2Fclasses%2Fjava%2Flang%2FRuntime.java%22%5D%7D
+/owner/repo/issues/new?template=.gitea%2FISSUE_TEMPLATE%2Fsrc%2Fjava.base%2Fshare%2Fclasses%2Fjava%2Flang%2FRuntime.java
+/user/login?redirect_to=%2Fowner%2Frepo%2F_edit%2Fmain%2Fsrc%2Fjava.base%2Fshare%2Fclasses%2Fjava%2Flang%2FRuntime.java
+/owner/repo/graph?file=java.lang.String.md
+/api/v1/repos/owner/repo/commits?path=java.lang.String.md
+/api/v1/repos/owner/repo/file-contents?body=%7B%22files%22%3A%5B%22java.lang.String.md%22%5D%7D
+/owner/repo/issues/new?template=.gitea%2FISSUE_TEMPLATE%2Fjava.lang.String.md
+/user/login?redirect_to=%2Fowner%2Frepo%2F_edit%2Fmain%2Fjava.lang.String.md
+/owner/repo/graph?file=META-INF%2Fservices%2Forg.apache.commons.logging.LogFactory
+/api/v1/repos/owner/repo/commits?path=META-INF%2Fservices%2Forg.apache.commons.logging.LogFactory
+/api/v1/repos/owner/repo/file-contents?body=%7B%22files%22%3A%5B%22META-INF%2Fservices%2Forg.apache.commons.logging.LogFactory%22%5D%7D
+/owner/repo/issues/new?template=.gitea%2FISSUE_TEMPLATE%2FMETA-INF%2Fservices%2Forg.apache.commons.logging.LogFactory
+/user/login?redirect_to=%2Fowner%2Frepo%2F_edit%2Fmain%2FMETA-INF%2Fservices%2Forg.apache.commons.logging.LogFactory
+/owner/repo/graph?file=process.env.d.ts
+/api/v1/repos/owner/repo/commits?path=process.env.d.ts
+/api/v1/repos/owner/repo/file-contents?body=%7B%22files%22%3A%5B%22process.env.d.ts%22%5D%7D
+/owner/repo/issues/new?template=.gitea%2FISSUE_TEMPLATE%2Fprocess.env.d.ts
+/user/login?redirect_to=%2Fowner%2Frepo%2F_edit%2Fmain%2Fprocess.env.d.ts
+/owner/repo/graph?file=document.write.js
+/api/v1/repos/owner/repo/commits?path=document.write.js
+/api/v1/repos/owner/repo/file-contents?body=%7B%22files%22%3A%5B%22document.write.js%22%5D%7D
+/owner/repo/issues/new?template=.gitea%2FISSUE_TEMPLATE%2Fdocument.write.js
+/user/login?redirect_to=%2Fowner%2Frepo%2F_edit%2Fmain%2Fdocument.write.js
+/owner/repo/graph?file=test%2Ffixtures%2F__proto__.json
+/api/v1/repos/owner/repo/commits?path=test%2Ffixtures%2F__proto__.json
+/api/v1/repos/owner/repo/file-contents?body=%7B%22files%22%3A%5B%22test%2Ffixtures%2F__proto__.json%22%5D%7D
+/owner/repo/issues/new?template=.gitea%2FISSUE_TEMPLATE%2Ftest%2Ffixtures%2F__proto__.json
+/user/login?redirect_to=%2Fowner%2Frepo%2F_edit%2Fmain%2Ftest%2Ffixtures%2F__proto__.json
+/owner/repo/graph?file=install-script.sh
+/api/v1/repos/owner/repo/commits?path=install-script.sh
+/api/v1/repos/owner/repo/file-contents?body=%7B%22files%22%3A%5B%22install-script.sh%22%5D%7D
+/owner/repo/issues/new?template=.gitea%2FISSUE_TEMPLATE%2Finstall-script.sh
+/user/login?redirect_to=%2Fowner%2Frepo%2F_edit%2Fmain%2Finstall-script.sh
+/owner/repo/graph?file=src%2Fbackend%2Fcatalog%2Finformation_schema.sql
+/api/v1/repos/owner/repo/commits?path=src%2Fbackend%2Fcatalog%2Finformation_schema.sql
+/api/v1/repos/owner/repo/file-contents?body=%7B%22files%22%3A%5B%22src%2Fbackend%2Fcatalog%2Finformation_schema.sql%22%5D%7D
+/owner/repo/issues/new?template=.gitea%2FISSUE_TEMPLATE%2Fsrc%2Fbackend%2Fcatalog%2Finformation_schema.sql
+/user/login?redirect_to=%2Fowner%2Frepo%2F_edit%2Fmain%2Fsrc%2Fbackend%2Fcatalog%2Finformation_schema.sql
+/owner/repo/graph?file=docs%2Fa%20b.xhtml
+/api/v1/repos/owner/repo/commits?path=docs%2Fa%20b.xhtml
+/api/v1/repos/owner/repo/file-contents?body=%7B%22files%22%3A%5B%22docs%2Fa%20b.xhtml%22%5D%7D
+/owner/repo/issues/new?template=.gitea%2FISSUE_TEMPLATE%2Fdocs%2Fa%20b.xhtml
+/user/login?redirect_to=%2Fowner%2Frepo%2F_edit%2Fmain%2Fdocs%2Fa%20b.xhtml
+/owner/repo/graph?file=%5Bdraft%5D.md
+/api/v1/repos/owner/repo/commits?path=%5Bdraft%5D.md
+/api/v1/repos/owner/repo/file-contents?body=%7B%22files%22%3A%5B%22%5Bdraft%5D.md%22%5D%7D
+/owner/repo/issues/new?template=.gitea%2FISSUE_TEMPLATE%2F%5Bdraft%5D.md
+/user/login?redirect_to=%2Fowner%2Frepo%2F_edit%2Fmain%2F%5Bdraft%5D.md
+/owner/repo/blob_excerpt/0123456789abcdef0123456789abcdef01234567?last_left=10&last_right=10&left=20&right=20&left_hunk_size=5&right_hunk_size=5&path=process.env.d.ts&style=unified&direction=down&wiki=false
+/owner/repo/blob_excerpt/0123456789abcdef0123456789abcdef01234567?last_left=10&last_right=10&left=20&right=20&left_hunk_size=5&right_hunk_size=5&path=java.lang.String.md&style=unified&direction=down&wiki=false
+/owner/repo/blob_excerpt/0123456789abcdef0123456789abcdef01234567?last_left=10&last_right=10&left=20&right=20&left_hunk_size=5&right_hunk_size=5&path=install-script.sh&style=unified&direction=down&wiki=false
+/owner/repo/blob_excerpt/0123456789abcdef0123456789abcdef01234567?last_left=10&last_right=10&left=20&right=20&left_hunk_size=5&right_hunk_size=5&path=information_schema.sql&style=unified&direction=down&wiki=false
+/owner/repo/blob_excerpt/0123456789abcdef0123456789abcdef01234567?last_left=10&last_right=10&left=20&right=20&left_hunk_size=5&right_hunk_size=5&path=document.write.js&style=unified&direction=down&wiki=false
+/owner/repo/blob_excerpt/0123456789abcdef0123456789abcdef01234567?last_left=10&last_right=10&left=20&right=20&left_hunk_size=5&right_hunk_size=5&path=__proto__.json&style=unified&direction=down&wiki=false
+/owner/repo/blob_excerpt/0123456789abcdef0123456789abcdef01234567?last_left=10&last_right=10&left=20&right=20&left_hunk_size=5&right_hunk_size=5&path=src%2Fjava.base%2Fshare%2Fclasses%2Fjava%2Flang%2FRuntime.java&style=unified&direction=down&wiki=false
+/owner/repo/blob_excerpt/0123456789abcdef0123456789abcdef01234567?last_left=10&last_right=10&left=20&right=20&left_hunk_size=5&right_hunk_size=5&path=index.xhtml&style=unified&direction=down&wiki=false
+
+# File names of attachments uploaded through the API, to a release, an issue and
+# a comment.
+/api/v1/repos/owner/repo/releases/1/assets?name=package.json
+/api/v1/repos/owner/repo/releases/1/assets?name=.gitignore
+/api/v1/repos/owner/repo/releases/1/assets?name=docker-compose.yml
+/api/v1/repos/owner/repo/releases/1/assets?name=.htaccess
+/api/v1/repos/owner/repo/releases/1/assets?name=docker-entrypoint
+/api/v1/repos/owner/repo/releases/1/assets?name=python3-setup.sh
+/api/v1/repos/owner/repo/releases/1/assets?name=Runtime.java
+/api/v1/repos/owner/repo/releases/1/assets?name=org.apache.commons.logging.LogFactory
+/api/v1/repos/owner/repo/releases/1/assets?name=%5Bdraft%5D.md
+/api/v1/repos/owner/repo/releases/1/assets?name=notes.txt~
+/api/v1/repos/owner/repo/releases/1/assets?name=install-script.sh
+/api/v1/repos/owner/repo/issues/1/assets?name=install-script.sh
+/api/v1/repos/owner/repo/issues/comments/1/assets?name=install-script.sh
+/api/v1/repos/owner/repo/releases/1/assets?name=process.env.d.ts
+/api/v1/repos/owner/repo/issues/1/assets?name=process.env.d.ts
+/api/v1/repos/owner/repo/issues/comments/1/assets?name=process.env.d.ts
+/api/v1/repos/owner/repo/releases/1/assets?name=java.lang.String.md
+/api/v1/repos/owner/repo/issues/1/assets?name=java.lang.String.md
+/api/v1/repos/owner/repo/issues/comments/1/assets?name=java.lang.String.md
+/api/v1/repos/owner/repo/releases/1/assets?name=information_schema.sql
+/api/v1/repos/owner/repo/issues/1/assets?name=information_schema.sql
+/api/v1/repos/owner/repo/issues/comments/1/assets?name=information_schema.sql
+/api/v1/repos/owner/repo/releases/1/assets?name=document.write.js
+/api/v1/repos/owner/repo/issues/1/assets?name=document.write.js
+/api/v1/repos/owner/repo/issues/comments/1/assets?name=document.write.js
+/api/v1/repos/owner/repo/releases/1/assets?name=__proto__.json
+/api/v1/repos/owner/repo/issues/1/assets?name=__proto__.json
+/api/v1/repos/owner/repo/issues/comments/1/assets?name=__proto__.json
+/api/v1/repos/owner/repo/releases/1/assets?name=index.xhtml
+/api/v1/repos/owner/repo/issues/1/assets?name=index.xhtml
+/api/v1/repos/owner/repo/issues/comments/1/assets?name=index.xhtml
+
+# An artifact upload from actions/upload-artifact@v3, which sends Content-Range.
+/api/actions_pipeline/_apis/pipelines/workflows/1/artifacts/9b7c1f3a/upload?itemPath=artifact%2Freport.txt Content-Range: bytes 0-9/10
+
+# Branch and tag names in the query string: deleting and restoring a branch,
+# starting a release from a tag, a branch protection rule, a directory listing's
+# last commits, and a container image push that reuses a layer.
+/owner/repo/branches/delete?name=docker-build&page=1
+/owner/repo/branches/restore?branch_id=1&name=docker-build&page=1
+/owner/repo/releases/new?tag=docker-build
+/owner/repo/settings/branches/edit?rule_name=docker-build
+/owner/repo/lastcommit/main/src?refSubUrl=branch%2Fdocker-build
+/v2/owner/app/blobs/uploads/?mount=sha256%3A0000&from=owner%2Fdocker-build
+/owner/repo/branches/delete?name=feat%2Fdocker-support&page=1
+/owner/repo/branches/restore?branch_id=1&name=feat%2Fdocker-support&page=1
+/owner/repo/releases/new?tag=feat%2Fdocker-support
+/owner/repo/settings/branches/edit?rule_name=feat%2Fdocker-support
+/owner/repo/lastcommit/main/src?refSubUrl=branch%2Ffeat%2Fdocker-support
+/v2/owner/app/blobs/uploads/?mount=sha256%3A0000&from=owner%2Ffeat%2Fdocker-support
+/owner/repo/branches/delete?name=renovate%2Fdocker-build-push-action-6.x&page=1
+/owner/repo/branches/restore?branch_id=1&name=renovate%2Fdocker-build-push-action-6.x&page=1
+/owner/repo/releases/new?tag=renovate%2Fdocker-build-push-action-6.x
+/owner/repo/settings/branches/edit?rule_name=renovate%2Fdocker-build-push-action-6.x
+/owner/repo/lastcommit/main/src?refSubUrl=branch%2Frenovate%2Fdocker-build-push-action-6.x
+/v2/owner/app/blobs/uploads/?mount=sha256%3A0000&from=owner%2Frenovate%2Fdocker-build-push-action-6.x
+/owner/repo/branches/delete?name=python3-migration&page=1
+/owner/repo/branches/restore?branch_id=1&name=python3-migration&page=1
+/owner/repo/releases/new?tag=python3-migration
+/owner/repo/settings/branches/edit?rule_name=python3-migration
+/owner/repo/lastcommit/main/src?refSubUrl=branch%2Fpython3-migration
+/v2/owner/app/blobs/uploads/?mount=sha256%3A0000&from=owner%2Fpython3-migration
+/owner/repo/branches/delete?name=ansible-roles&page=1
+/owner/repo/branches/restore?branch_id=1&name=ansible-roles&page=1
+/owner/repo/releases/new?tag=ansible-roles
+/owner/repo/settings/branches/edit?rule_name=ansible-roles
+/owner/repo/lastcommit/main/src?refSubUrl=branch%2Fansible-roles
+/v2/owner/app/blobs/uploads/?mount=sha256%3A0000&from=owner%2Fansible-roles
+/owner/repo/branches/delete?name=whoami&page=1
+/owner/repo/branches/restore?branch_id=1&name=whoami&page=1
+/owner/repo/releases/new?tag=whoami
+/owner/repo/settings/branches/edit?rule_name=whoami
+/owner/repo/lastcommit/main/src?refSubUrl=branch%2Fwhoami
+/v2/owner/app/blobs/uploads/?mount=sha256%3A0000&from=owner%2Fwhoami
+
+# Pages a signed-in user opens.
+/
+/owner/repo
+/owner/repo/issues
+/owner/repo/pulls
+/owner/repo/releases
+/owner/repo/wiki
+/owner/repo/activity
+/owner/repo/branches
+/owner/repo/tags
+/owner/repo/settings
+/owner/repo/actions
+/owner/repo/compare/main...main
+/owner/repo/commits/branch/main
+/owner/repo/archive/main.zip
+/notifications
+/user/settings
+/user/settings/applications
+/explore/repos
+/-/admin

internal/waf/waf.go

@@ -1,8 +1,9 @@
 // Package waf runs the OWASP Core Rule Set 4.25.0, through Coraza, on the
 // method, the URL with its query and the headers of a request, and on its
-// body while SWWAF_WAF_BODY_LIMIT is set, with the six changes smallwebwaf
-// makes to it, as "Attack detection" under "Settings" in SPEC.md describes
-// them. It reads no response.
+// body while SWWAF_WAF_BODY_LIMIT is set, with the eight changes smallwebwaf
+// makes to it and the exclusions in SWWAF_CORE_RULE_SET_EXCLUSIONS_FILE, as
+// "Attack detection" under "Settings" in SPEC.md describes them. It reads no
+// response.
 //
 // smallwebwaf writes only to its state directory, so Coraza is built with
 // its no_fs_access tag, as the Dockerfile and script/build build it: of a
@@ -11,10 +12,14 @@
 package waf
 
 import (
+	_ "embed"
+	"errors"
 	"fmt"
 	"io"
 	"net/http"
 	"net/netip"
+	"os"
+	"regexp"
 	"slices"
 	"strconv"
 	"strings"
@@ -26,12 +31,14 @@ import (
 )
 
 // directives are the Core Rule Set as smallwebwaf runs it, with the
-// paranoia level for %d, and bodyDirectives for %s while
-// SWWAF_WAF_BODY_LIMIT is set. Each rule smallwebwaf adds has an id from
-// 900000 to 900999, the ids the Core Rule Set keeps for the rules that set
-// it up, which SWWAF_WAF_DISABLED_RULES refuses, so that no setting
-// switches one off. Coraza joins a line ending in \ to the next, without
-// the spaces at the start of the next.
+// paranoia level for %d, bodyDirectives for the first %s while
+// SWWAF_WAF_BODY_LIMIT is set, the exclusions file for the second, and
+// giteaExclusions for the third.
+// Each rule smallwebwaf adds has an id from 900000 to 900999, the ids the
+// Core Rule Set keeps for the rules that set it up, which
+// SWWAF_WAF_DISABLED_RULES and the exclusions file refuse, so that no
+// setting switches one off. Coraza joins a line ending in \ to the next,
+// without the spaces at the start of the next.
 const directives = `
 # The engine only detects. smallwebwaf compares the request's anomaly
 # score with SWWAF_WAF_ANOMALY_THRESHOLD itself, in block and detect mode
@@ -69,6 +76,14 @@ SecArgumentsLimit 1000
 SecRule ARGUMENTS_LIMIT_REACHED "@eq 1" "id:900300,phase:2,pass,\
     severity:'CRITICAL',setvar:'tx.inbound_anomaly_score_pl1=+5'"
 
+# The exclusions file comes before the rules, where the Core Rule Set puts
+# its own file of exclusions that run before the rules, so that they run
+# before the rules of phase 1 too.
+%s
+
+# The eighth change comes before the rules for the same reason.
+%s
+
 # The sixth: only the rules for requests are loaded, and no response is
 # inspected.
 Include @owasp_crs/REQUEST-*.conf
@@ -96,10 +111,19 @@ SecRuleUpdateTargetById 932260 "!ARGS:path|!ARGS:files|!ARGS:skip-to|\
     !ARGS:artifactName|!ARGS:redirect_to"
 
 # The fifth, for Referer: it is not checked for a Unix command without
-# arguments, or for Java starting a process. The cookies are left out in
-# Inspect.
+# arguments, for Java starting a process, or for a Java class name. 944130
+# refused every page opened from the page of java.lang.String.md. The
+# cookies are left out in Inspect.
 SecRuleUpdateTargetById 932340 "!REQUEST_HEADERS:Referer"
 SecRuleUpdateTargetById 944110 "!REQUEST_HEADERS:Referer"
+SecRuleUpdateTargetById 944130 "!REQUEST_HEADERS:Referer"
+
+# The seventh: a container image push that reuses a layer names the image
+# it takes the layer from in the query parameter from, which is not
+# checked for command names. 932260 refused the push of a layer from
+# owner/python3-app.
+SecRule REQUEST_FILENAME "@rx ^/v2/.+/blobs/uploads/$" \
+    "id:900500,phase:1,pass,nolog,ctl:ruleRemoveTargetById=932260;ARGS:from"
 `
 
 // bodyDirectives have the Core Rule Set read the part of a request body
@@ -144,6 +168,13 @@ SecRule MULTIPART_STRICT_ERROR "!@eq 0" "id:900450,phase:2,pass,\
     severity:'CRITICAL',setvar:'tx.inbound_anomaly_score_pl1=+5'"
 `
 
+// giteaExclusions are the eighth change: the fields of gitea's own
+// requests that skip the rules that refused them there, as Coraza
+// directives.
+//
+//go:embed gitea.conf
+var giteaExclusions string
+
 // cookiesNotRead are the cookies the Core Rule Set reads a request
 // without, the rest of the fifth change.
 //
@@ -160,6 +191,94 @@ type Params struct {
 	// BodyLimit is the most of a request body the Core Rule Set reads
 	// (SWWAF_WAF_BODY_LIMIT), 0 while it is off and it reads none.
 	BodyLimit int64
+	// ExclusionsFile is the path of a file of exclusions loaded before the
+	// Core Rule Set's rules (SWWAF_CORE_RULE_SET_EXCLUSIONS_FILE), "" while
+	// there is none.
+	ExclusionsFile string
+}
+
+// The ids of smallwebwaf's own rules, which an exclusions file may not
+// name.
+const (
+	firstOwnRuleID = 900000
+	lastOwnRuleID  = 900999
+)
+
+// numberOrRange matches a number, or a range of numbers such as
+// 900000-900999. Coraza reads a number with a + before it too, so the
+// end of a range may have one.
+var numberOrRange = regexp.MustCompile(`(\d+)(?:-\+?(\d+))?`)
+
+// errSmallwebwafRuleID is the error of an exclusions file that names an
+// id of smallwebwaf's own rules.
+var errSmallwebwafRuleID = errors.New("an id of smallwebwaf's own rules")
+
+// errChangesNoRule is the error of an exclusions file that holds a
+// directive that removes or changes rules as it loads, such as
+// SecRuleRemoveById. The Core Rule Set's rules load after the file, so
+// the directive finds none of them.
+var errChangesNoRule = errors.New("the Core Rule Set's rules load after the file; " +
+	"switch a rule off with SWWAF_WAF_DISABLED_RULES, or on some requests " +
+	"with a ctl exclusion")
+
+// directivesIn returns the directives in text as Coraza reads them: it
+// skips blank lines and comment lines, and joins a line ending in \ to
+// the next, without the spaces around either.
+func directivesIn(text string) []string {
+	var directives []string
+
+	joined := ""
+
+	for line := range strings.Lines(text) {
+		line = strings.TrimSpace(line)
+		if line == "" || strings.HasPrefix(line, "#") {
+			continue
+		}
+
+		if start, found := strings.CutSuffix(line, `\`); found {
+			joined += start
+
+			continue
+		}
+
+		directives = append(directives, joined+line)
+		joined = ""
+	}
+
+	return directives
+}
+
+// checkExclusions returns an error if exclusions, the text of an
+// exclusions file, names an id of smallwebwaf's own rules, alone or in a
+// range, or holds a directive whose name starts with SecRuleRemove or
+// SecRuleUpdate.
+func checkExclusions(exclusions string) error {
+	for _, directive := range directivesIn(exclusions) {
+		for _, match := range numberOrRange.FindAllStringSubmatch(directive, -1) {
+			first, _ := strconv.Atoi(match[1])
+
+			last := first
+			if match[2] != "" {
+				last, _ = strconv.Atoi(match[2])
+			}
+
+			if first <= lastOwnRuleID && last >= firstOwnRuleID {
+				return fmt.Errorf("the exclusions file names %s: %w", match[0],
+					errSmallwebwafRuleID)
+			}
+		}
+
+		// Coraza takes the directive's name up to the first space, without
+		// regard to case.
+		name, _, _ := strings.Cut(directive, " ")
+		if lower := strings.ToLower(name); strings.HasPrefix(lower, "secruleremove") ||
+			strings.HasPrefix(lower, "secruleupdate") {
+			return fmt.Errorf("%s in the exclusions file changes no rule: %w", name,
+				errChangesNoRule)
+		}
+	}
+
+	return nil
 }
 
 // CoreRuleSet is the Core Rule Set, ready to inspect requests. It is safe
@@ -169,16 +288,35 @@ type CoreRuleSet struct {
 	bodyLimit int64
 }
 
-// New returns the Core Rule Set with the six changes, at params'
-// paranoia level, without the rules it switches off, and reading request
-// bodies up to params' limit.
+// New returns the Core Rule Set with the eight changes, at params'
+// paranoia level, without the rules it switches off, reading request
+// bodies up to params' limit, and with params' exclusions file loaded
+// before the Core Rule Set's rules. An exclusions file is an error if it
+// cannot be read or does not parse, or if checkExclusions refuses it.
 func New(params Params) (*CoreRuleSet, error) {
 	body := ""
 	if params.BodyLimit > 0 {
 		body = fmt.Sprintf(bodyDirectives, params.BodyLimit)
 	}
 
-	text := fmt.Sprintf(directives, params.ParanoiaLevel, body)
+	exclusions := ""
+
+	if params.ExclusionsFile != "" {
+		file, err := os.ReadFile(params.ExclusionsFile)
+		if err != nil {
+			return nil, fmt.Errorf("read the exclusions file: %w", err)
+		}
+
+		exclusions = string(file)
+
+		err = checkExclusions(exclusions)
+		if err != nil {
+			return nil, err
+		}
+	}
+
+	text := fmt.Sprintf(directives, params.ParanoiaLevel, body, exclusions,
+		giteaExclusions)
 
 	if len(params.DisabledRules) > 0 {
 		ids := make([]string, len(params.DisabledRules))

internal/waf/waf_test.go

@@ -5,6 +5,7 @@ import (
 	"net/http/httptest"
 	"net/netip"
 	"net/url"
+	"os"
 	"path/filepath"
 	"reflect"
 	"strconv"
@@ -119,7 +120,7 @@ func atDefaults(t *testing.T) *waf.CoreRuleSet {
 }
 
 // wantChange checks that crs lets through passes, a gitea request one of
-// the six changes is for, and still finds result in refused, a request
+// the eight changes is for, and still finds result in refused, a request
 // like it that the change is not for.
 func wantChange(
 	t *testing.T, crs *waf.CoreRuleSet, passes, refused request, result waf.Result,
@@ -308,13 +309,14 @@ func TestCookiesGiteaFlashAndRedirectToAreNotRead(t *testing.T) {
 		matched(930120))
 }
 
-func TestRefererIsNotCheckedForACommandOrJavaStartingAProcess(t *testing.T) {
+func TestRefererIsNotCheckedForACommandOrJava(t *testing.T) {
 	t.Parallel()
 
 	const (
 		search      = "https://git.example/explore/repos?q=env"
 		runtimeJava = "https://git.example/openjdk/jdk/src/branch/master/src/" +
 			"java.base/share/classes/java/lang/Runtime.java"
+		stringMD = "https://git.example/owner/repo/src/branch/main/java.lang.String.md"
 	)
 
 	crs := atDefaults(t)
@@ -323,6 +325,8 @@ func TestRefererIsNotCheckedForACommandOrJavaStartingAProcess(t *testing.T) {
 		matched(932340))
 	wantChange(t, crs, get("/", "Referer: "+runtimeJava),
 		get("/", "X-Page: "+runtimeJava), matched(944110))
+	wantChange(t, crs, get("/", "Referer: "+stringMD), get("/", "X-Page: "+stringMD),
+		matched(944130))
 
 	// It is still checked for script and SQL injection.
 	wantResult(t, crs,
@@ -362,6 +366,190 @@ func TestEachDisabledRuleIsSwitchedOff(t *testing.T) {
 	wantResult(t, newCoreRuleSet(t, 1, 920350, 911100), r, waf.Result{})
 }
 
+func TestImagePushThatReusesALayerIsNotCheckedForCommandNames(t *testing.T) {
+	t.Parallel()
+
+	crs := atDefaults(t)
+	reuse := "?mount=sha256:0000&from=owner/python3-app"
+
+	wantChange(t, crs, get("/v2/owner/app/blobs/uploads/"+reuse), get("/upload/"+reuse),
+		matched(932260))
+
+	// A command after the image's name is still refused.
+	wantResult(t, crs,
+		get("/v2/owner/app/blobs/uploads/?from=owner/app;cat%20/etc/passwd"),
+		matched(930120, 932160))
+}
+
+// withExclusions returns the Core Rule Set at the defaults, with the
+// exclusions file at path.
+func withExclusions(path string) (*waf.CoreRuleSet, error) {
+	return waf.New(waf.Params{
+		ParanoiaLevel: 1, DisabledRules: defaultDisabledRules, ExclusionsFile: path,
+	})
+}
+
+// exclusionsFile writes text to a file of exclusions and returns its path.
+func exclusionsFile(t *testing.T, text string) string {
+	t.Helper()
+
+	path := filepath.Join(t.TempDir(), "exclusions.conf")
+
+	err := os.WriteFile(path, []byte(text), 0o600)
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	return path
+}
+
+// backupFileExclusion is an exclusions file that switches 920500, a rule
+// of phase 1, off for the path of a backup file under /files/.
+const backupFileExclusion = `SecRule REQUEST_FILENAME "@beginsWith /files/" ` +
+	`"id:1,phase:1,pass,nolog,ctl:ruleRemoveTargetById=920500;REQUEST_FILENAME"` + "\n"
+
+func TestExclusionsFileIsLoadedBeforeTheRules(t *testing.T) {
+	t.Parallel()
+
+	crs, err := withExclusions(exclusionsFile(t, backupFileExclusion))
+	if err != nil {
+		t.Fatalf("load the exclusions: %v", err)
+	}
+
+	wantChange(t, crs, get("/files/notes.txt~"), get("/notes.txt~"), matched(920500))
+}
+
+func TestRuleSwitchedOffAndNamedInTheExclusionsFileIsOff(t *testing.T) {
+	t.Parallel()
+
+	crs, err := waf.New(waf.Params{
+		ParanoiaLevel: 1, DisabledRules: []int{920500},
+		ExclusionsFile: exclusionsFile(t, backupFileExclusion),
+	})
+	if err != nil {
+		t.Fatalf("load the exclusions: %v", err)
+	}
+
+	wantResult(t, crs, get("/notes.txt~"), waf.Result{})
+}
+
+func TestExclusionsFileMayNameAnyNumberInAComment(t *testing.T) {
+	t.Parallel()
+
+	_, err := withExclusions(exclusionsFile(t,
+		"# 942100: GET /issues/900123\n"+backupFileExclusion))
+	if err != nil {
+		t.Errorf("the exclusions did not load: %v", err)
+	}
+}
+
+func TestExclusionsFileThatCannotBeUsedIsAnError(t *testing.T) {
+	t.Parallel()
+
+	missing := filepath.Join(t.TempDir(), "missing.conf")
+
+	_, err := withExclusions(missing)
+	if err == nil {
+		t.Errorf("%s loaded", missing)
+	}
+
+	for _, tc := range []struct{ text, want string }{
+		{"SecNoSuchDirective On\n", "unknown directive"},
+		// smallwebwaf's own rules may not be switched off or changed, by
+		// id or in a range, on one line or split over several.
+		{"SecRuleRemoveById 899999-901000\n", "names 899999-901000"},
+		{
+			"SecAction \"id:1,phase:1,pass,nolog,ctl:ruleRemoveById=899999-901000\"\n",
+			"names 899999-901000",
+		},
+		{
+			"SecAction \"id:1,phase:1,pass,nolog,ctl:ruleRemoveById=899999-+901000\"\n",
+			"names 899999-+901000",
+		},
+		{
+			"SecAction \"id:1,phase:1,pass,nolog,ctl:ruleRemoveTargetById=900500;ARGS:from\"\n",
+			"names 900500",
+		},
+		{"SecRuleRemoveById 899000-\\\n    901000\n", "names 899000-901000"},
+		{
+			"SecAction \"id:1,phase:1,pass,nolog,\\\n" +
+				"    ctl:ruleRemoveById=9005\\\n    00\"\n",
+			"names 900500",
+		},
+		// The Core Rule Set's rules load after the file.
+		{"SecRuleRemoveById 942100\n", "SecRuleRemoveById in the exclusions file"},
+		{
+			"SecRuleUpdateTargetById 942100 \"!ARGS:id\"\n",
+			"SecRuleUpdateTargetById in the exclusions file",
+		},
+	} {
+		_, err := withExclusions(exclusionsFile(t, tc.text))
+		if err == nil || !strings.Contains(err.Error(), tc.want) {
+			t.Errorf("%q gave the error %v, want one with %q", tc.text, err, tc.want)
+		}
+	}
+}
+
+// giteaRequests returns the recorded ordinary gitea requests in testdata.
+// Each has the Referer of a page that names the same, as a page opened
+// from it has.
+func giteaRequests(t *testing.T) []request {
+	t.Helper()
+
+	text, err := os.ReadFile(filepath.Join("testdata", "gitea-requests.txt"))
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	var requests []request
+
+	for line := range strings.Lines(string(text)) {
+		line = strings.TrimSpace(line)
+		if line == "" || strings.HasPrefix(line, "#") {
+			continue
+		}
+
+		target, header, _ := strings.Cut(line, " ")
+
+		headers := []string{"Referer: http://git.example" + target}
+		if header != "" {
+			headers = append(headers, header)
+		}
+
+		requests = append(requests, get(target, headers...))
+	}
+
+	return requests
+}
+
+func TestOrdinaryGiteaRequestsPassAndAttacksAreRefused(t *testing.T) {
+	t.Parallel()
+
+	const threshold = 5 // SWWAF_WAF_ANOMALY_THRESHOLD's default
+
+	crs := atDefaults(t)
+
+	for _, r := range giteaRequests(t) {
+		if got := inspect(t, crs, r); got.Score >= threshold {
+			t.Errorf("%s %q refused: %+v", r.target, r.headers[1:], got)
+		}
+	}
+
+	// In q too, off gitea's search pages.
+	for _, parameter := range []string{"id", "q"} {
+		for _, attack := range []string{
+			"1'%20OR%20'1'='1",
+			"..%2Fcustom%2Fconf%2Fapp.ini",
+			"%3Cscript%3Ealert(1)%3C%2Fscript%3E",
+		} {
+			target := "/owner/repo?" + parameter + "=" + attack
+			if got := inspect(t, crs, get(target)); got.Score < threshold {
+				t.Errorf("%s let through: %+v", target, got)
+			}
+		}
+	}
+}
+
 // bodyLimit is SWWAF_WAF_BODY_LIMIT in the tests that read bodies.
 const bodyLimit = 8 << 10
 

script/gitea-requests

@@ -1,350 +0,0 @@
-#!/bin/sh
-# script/gitea-requests: build the image and run gitea 1.27.3 behind rproxy
-# and servewaf, three containers on one network. Every setting is at its
-# default but these: SWRP_UPSTREAM_URL names gitea's container, SWRP_WAF_BACKEND
-# names servewaf's, and SWWAF_LOG_REQUEST_HEADERS adds the header that labels a
-# request. Then send through rproxy the gitea requests that reading gitea's
-# source found the Core Rule Set refuses, which docs/gitea.md records, and a
-# short sample of gitea's ordinary use: signing in, pages of files and commits,
-# a diff, the API, a push, clone and fetch over HTTP, and two container image
-# pushes. Last, print each request servewaf logged, with what it did with it and
-# the ids of the Core Rule Set's rules that matched it.
-# Every request comes from one client, docker's gateway, so more than
-# SWWAF_ERROR_BURST_THRESHOLD, 30, refusals in a minute would ban it, and
-# the requests after would show as banned. The containers, the network,
-# the images and the files the script makes are removed however it ends;
-# gitea's own image stays, as the base images of a build do. It needs
-# network access, and a docker daemon that pushes to a registry on
-# localhost over plain HTTP, as docker does by default. script/check does
-# not run this.
-set -eu
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd -P)"
-ROOT="$(cd "$SCRIPT_DIR/.." && pwd -P)"
-
-# gitea 1.27.3, 2026-08-29
-GITEA_IMAGE="gitea/gitea@sha256:87a67ee09d3ae0d1df5fda5dcda3e2a1f9236a45b0a59025d6e00e46adc43bef"
-
-# Named after this run, so that runs in other clones on the same host
-# never touch each other's.
-NAME="$("$SCRIPT_DIR/projectname")-gitea-$$"
-IMAGE="$NAME-image"
-NETWORK="$NAME"
-RPROXY="$NAME-rproxy"
-SERVEWAF="$NAME-servewaf"
-GITEA="$NAME-gitea"
-
-# gitea's one user, who owns the repository and the container images.
-PASSWORD="owner-password"
-
-BROWSER="Mozilla/5.0 (X11; Linux x86_64; rv:131.0) Gecko/20100101 Firefox/131.0"
-
-# The header that labels a request in the report. rproxy makes every request's
-# id itself, so a label cannot be the X-Request-ID.
-LABEL_HEADER="X-Case"
-
-# The default of SWWAF_LOG_REQUEST_HEADERS, and the header above.
-LOGGED_HEADERS="accept,accept-language,accept-encoding,content-type,origin,range,x-case"
-
-# The files the script makes, and rproxy's address once it runs, localhost and
-# the port docker publishes it on: a host name, since the Core Rule Set takes a
-# Host that is an IP address for a warning (920350).
-WORK=""
-address=""
-
-cleanup() {
-    # So that a signal cannot stop it partway through.
-    trap '' HUP INT TERM
-    docker rm --force --volumes "$RPROXY" "$SERVEWAF" "$GITEA" >/dev/null 2>&1 || true
-    docker network rm "$NETWORK" >/dev/null 2>&1 || true
-    docker rmi --force "$IMAGE" >/dev/null 2>&1 || true
-    if [ -n "$address" ]; then
-        docker rmi --force "$address/owner/python3-app:1" "$address/owner/app:1" \
-            >/dev/null 2>&1 || true
-    fi
-    rm -rf "$WORK"
-}
-
-fail() {
-    echo "gitea-requests: $*" >&2
-    report
-    exit 1
-}
-
-# wait_for <what fails> <command>...: run the command every second until
-# it succeeds, for at most a minute.
-wait_for() {
-    failure="$1"
-    shift
-    tries=0
-    until "$@"; do
-        tries=$((tries + 1))
-        [ "$tries" -lt 60 ] || fail "$failure"
-        sleep 1
-    done
-}
-
-# healthy <container>: docker says the container's health check passes.
-healthy() {
-    status="$(docker inspect --format '{{.State.Health.Status}}' "$1")"
-    [ "$status" = healthy ]
-}
-
-# logged <text>...: a line of servewaf's output holds every text, in any order.
-logged() {
-    lines="$(docker logs "$SERVEWAF" 2>&1)"
-    for text in "$@"; do
-        lines="$(printf '%s\n' "$lines" | grep -F "$text")" || return 1
-    done
-}
-
-# send <label> <path> <curl option>...: send a request for path to rproxy, with
-# label in LABEL_HEADER, which the report gives, and keep the body of the answer
-# in $WORK/answer. The Core Rule Set reads that header too, so a label names no
-# file the cases name.
-send() {
-    label="$1"
-    path="$2"
-    shift 2
-    curl --silent --show-error --max-time 30 --output "$WORK/answer" \
-        --header "$LABEL_HEADER: $label" "$@" "http://$address$path"
-}
-
-# page <label> <path> <curl option>...: send the request as a browser
-# does, with the cookies gitea has set. Its Referer is the repository's
-# page, which links to the others, and never a page the Core Rule Set
-# refused: its address would have the next request refused too.
-page() {
-    label="$1"
-    path="$2"
-    shift 2
-    send "$label" "$path" --compressed --user-agent "$BROWSER" \
-        --header "Accept: text/html,application/xhtml+xml,*/*;q=0.8" \
-        --header "Accept-Language: en-US,en;q=0.5" \
-        --cookie "$WORK/cookies" --cookie-jar "$WORK/cookies" \
-        --referer "http://$address/owner/repo" "$@"
-}
-
-# api <label> <path> <curl option>...: send the request as a client of
-# gitea's API does, as the owner.
-api() {
-    label="$1"
-    path="$2"
-    shift 2
-    send "$label" "$path" --user "owner:$PASSWORD" \
-        --header "Accept: application/json" "$@"
-}
-
-# repo_git <git argument>...: run git as the owner, without the host's
-# own git settings, so that nothing it does is kept outside $WORK.
-repo_git() {
-    GIT_CONFIG_GLOBAL=/dev/null GIT_CONFIG_NOSYSTEM=1 git \
-        -c user.name=owner -c user.email=owner@example.invalid "$@"
-}
-
-# lines: forty lines of text, enough for a diff to hide some of them.
-lines() {
-    i=1
-    while [ "$i" -le 40 ]; do
-        echo "line $i"
-        i=$((i + 1))
-    done
-}
-
-# make_repository: create the repository owner/repo, holding a file of
-# each name the cases name, and push it, which is the push over HTTP of
-# the sample. The second commit adds a line at the end of Runtime.java,
-# so that its diff hides the lines above.
-make_repository() {
-    status="$(api create-repository /api/v1/user/repos \
-        --header "Content-Type: application/json" --data '{"name":"repo"}' \
-        --write-out '%{http_code}')"
-    [ "$status" = 201 ] || fail "creating the repository was answered $status"
-
-    dir="$WORK/repo"
-    repo_git init --quiet --initial-branch=main "$dir"
-    for file in \
-        src/java.base/share/classes/java/lang/Runtime.java \
-        java.lang.String.md \
-        META-INF/services/org.apache.commons.logging.LogFactory \
-        document.write.js \
-        process.env.d.ts \
-        test/fixtures/__proto__.json \
-        install-script.sh \
-        src/backend/catalog/information_schema.sql \
-        .../notes.txt \
-        README.md; do
-        mkdir -p "$dir/$(dirname "$file")"
-        lines >"$dir/$file"
-        repo_git -C "$dir" add "$file"
-    done
-    repo_git -C "$dir" commit --quiet --message "Add the files"
-    echo "line 41" >>"$dir/src/java.base/share/classes/java/lang/Runtime.java"
-    repo_git -C "$dir" commit --quiet --all --message "Add a line"
-
-    repo_git -C "$dir" -c "http.extraHeader=$LABEL_HEADER: git-push" push --quiet \
-        "http://owner:$PASSWORD@$address/owner/repo.git" main ||
-        fail "the push of the repository failed"
-}
-
-# browse: sign in, then open pages as a person does. The cases are those
-# of https://git.eeqj.de/sneak/smallwebwaf/issues/30.
-browse() {
-    # Case: gitea sends a visitor who is not signed in to the sign-in
-    # page, with the page asked for in redirect_to, when that page needs
-    # signing in, as a file's edit page does.
-    page issue-30-case /owner/repo/_edit/main/document.write.js --location
-
-    page sign-in /user/login
-    status="$(page sign-in /user/login --header "Origin: http://$address" \
-        --data-urlencode user_name=owner --data-urlencode "password=$PASSWORD" \
-        --write-out '%{http_code}')"
-    [ "$status" = 303 ] || fail "signing in was answered $status"
-
-    page browse /
-    page browse /owner/repo
-    page browse /owner/repo/src/branch/main/README.md
-    page browse /owner/repo/commits/branch/main
-    page browse "/owner/repo/commit/$(repo_git -C "$WORK/repo" rev-parse HEAD)"
-
-    # Case: expanding the lines the diff hides, by the link the diff's
-    # page gives for it.
-    excerpt="$(sed -n 's/.*data-fetch-url="\([^"]*blob_excerpt[^"]*\)".*/\1/p' \
-        "$WORK/answer" | head -n 1 | sed 's/&amp;/\&/g')"
-    [ -n "$excerpt" ] || fail "the diff's page has no link to its hidden lines"
-    page issue-30-case "$excerpt"
-
-    # Cases: the commit graph of one file, and the pages of files whose
-    # path the Core Rule Set takes for an attack.
-    page issue-30-case "/owner/repo/graph?file=src/java.base/share/classes/java/lang/Runtime.java"
-    page issue-30-case /owner/repo/src/branch/main/META-INF/services/org.apache.commons.logging.LogFactory
-    page issue-30-case /owner/repo/src/branch/main/java.lang.String.md
-    page issue-30-case /owner/repo/src/branch/main/process.env.d.ts
-    page issue-30-case /owner/repo/src/branch/main/.../notes.txt
-}
-
-# call_api: the API's calls the cases name: the commits of a file, for a
-# file of each name the Core Rule Set takes for an attack in the query
-# parameter path, and the file-contents call, which takes its list of
-# files as JSON in the query parameter body.
-call_api() {
-    for file in \
-        src/java.base/share/classes/java/lang/Runtime.java \
-        java.lang.String.md \
-        document.write.js \
-        process.env.d.ts \
-        test/fixtures/__proto__.json \
-        install-script.sh \
-        src/backend/catalog/information_schema.sql; do
-        api issue-30-case /api/v1/repos/owner/repo/commits --get --data-urlencode "path=$file"
-    done
-    api issue-30-case /api/v1/repos/owner/repo/file-contents --get \
-        --data-urlencode 'body={"files":["src/java.base/share/classes/java/lang/Runtime.java"]}'
-}
-
-# push_images: push a container image to owner/python3-app, then the same
-# image to owner/app. For the second, the case, docker asks gitea to take
-# its layer from owner/python3-app, naming it in the query parameter
-# from. docker sends no label, so the report gives its requests none. The image
-# is one small file, imported rather than built.
-push_images() {
-    echo "$NAME" >"$WORK/layer.txt"
-    tar -cf - -C "$WORK" layer.txt |
-        docker import - "$address/owner/python3-app:1" >/dev/null
-    docker tag "$address/owner/python3-app:1" "$address/owner/app:1"
-
-    # The login is written here rather than made with docker login, which
-    # would keep it in the host's credential helper when it has one.
-    mkdir "$WORK/docker"
-    printf '{"auths":{"%s":{"auth":"%s"}}}\n' "$address" \
-        "$(printf 'owner:%s' "$PASSWORD" | base64)" >"$WORK/docker/config.json"
-    for image in "$address/owner/python3-app:1" "$address/owner/app:1"; do
-        DOCKER_CONFIG="$WORK/docker" docker push --quiet "$image" >/dev/null ||
-            echo "gitea-requests: the push of $image failed" >&2
-    done
-}
-
-# clone_and_fetch: the clone and fetch over HTTP of the sample.
-clone_and_fetch() {
-    repo_git -c "http.extraHeader=$LABEL_HEADER: git-clone" clone --quiet \
-        "http://owner:$PASSWORD@$address/owner/repo.git" "$WORK/clone" ||
-        fail "the clone failed"
-    repo_git -C "$WORK/clone" -c "http.extraHeader=$LABEL_HEADER: git-fetch" fetch --quiet ||
-        fail "the fetch failed"
-}
-
-# field <name> <line>: the text of the field name in line, a line of the
-# request log, or nothing when it has none.
-field() {
-    printf '%s\n' "$2" | sed -n "s/.*\"$1\":\"\([^\"]*\)\".*/\1/p"
-}
-
-# report: print a line for each request rproxy reported to servewaf: what
-# servewaf did with the request, the ids of the Core Rule Set's rules that
-# matched it, its label, and the request. waf_blocked is a refusal by the Core
-# Rule Set, and forward a request passed on to gitea, whatever gitea answered.
-report() {
-    docker logs "$SERVEWAF" 2>/dev/null | grep '"servewaf_line":"report"' |
-        sed 's/\\u0026/\&/g' >"$WORK/requests"
-    while IFS= read -r line; do
-        ids="$(printf '%s\n' "$line" | sed -n 's/.*"waf_rule_ids":\[\([0-9,]*\)\].*/\1/p')"
-        query="$(field query "$line")"
-        label="$(field x-case "$line")"
-        printf '%-11s %-13s %-17s %s %s%s\n' "$(field action "$line")" "${ids:--}" \
-            "${label:--}" "$(field method "$line")" \
-            "$(field path "$line")" "${query:+?$query}"
-    done <"$WORK/requests"
-    echo "gitea-requests: $(grep -c . "$WORK/requests") requests," \
-        "$(grep -c '"action":"waf_blocked"' "$WORK/requests") refused by the Core Rule Set"
-}
-
-main() {
-    cd "$ROOT"
-    trap cleanup EXIT
-    trap 'exit 1' HUP INT TERM
-    WORK="$(mktemp -d)"
-
-    docker build --no-cache -t "$IMAGE" .
-
-    # rproxy first, so that gitea can be given the address it is reached at,
-    # and gitea's image pulled before, so that gitea starts within the minute
-    # rproxy's health check waits for it.
-    docker pull --quiet "$GITEA_IMAGE" >/dev/null
-    docker network create "$NETWORK" >/dev/null
-    docker run --detach --name "$SERVEWAF" --network "$NETWORK" \
-        --env SMALLWEBWAF_COMMAND=servewaf \
-        --env SWWAF_LOG_REQUEST_HEADERS="$LOGGED_HEADERS" \
-        "$IMAGE" >/dev/null
-    wait_for "servewaf's health check did not pass" healthy "$SERVEWAF"
-    docker run --detach --name "$RPROXY" --network "$NETWORK" \
-        --publish 127.0.0.1::8080 \
-        --env SWRP_UPSTREAM_URL="http://$GITEA:3000" \
-        --env SWRP_WAF_BACKEND="http://$SERVEWAF:8080" \
-        "$IMAGE" >/dev/null
-    published="$(docker port "$RPROXY" 8080/tcp)"
-    address="localhost:${published##*:}"
-
-    docker run --detach --name "$GITEA" --network "$NETWORK" \
-        --env GITEA__security__INSTALL_LOCK=true \
-        --env GITEA__server__ROOT_URL="http://$address/" \
-        "$GITEA_IMAGE" >/dev/null
-    # rproxy's health check passes once gitea takes connections.
-    wait_for "rproxy's health check did not pass" healthy "$RPROXY"
-    docker exec --user git "$GITEA" gitea admin user create --admin \
-        --username owner --password "$PASSWORD" --email owner@example.invalid \
-        --must-change-password=false >/dev/null
-
-    make_repository
-    browse
-    call_api
-    push_images
-    clone_and_fetch
-
-    # The fetch's last request is the last of all; once it is logged, so
-    # is every other.
-    wait_for "servewaf logged no report of the fetch" \
-        logged '"x-case":"git-fetch"' '"method":"POST"' '"servewaf_line":"report"'
-    report
-}
-
-main "$@"

script/gitea-setup

@@ -1,216 +0,0 @@
-#!/bin/sh
-# script/gitea-setup: build the image, bring up deploy/gitea under a project
-# name of its own, and check it:
-#   - that a page load, a push and a clone sent through traefik pass through
-#     rproxy, and that servewaf checks them;
-#   - that gitea logs the visitor's address, not rproxy's;
-#   - that a request from a container on the shared network skips the checks;
-#   - that with servewaf stopped, gitea still answers through rproxy.
-# It publishes no port of traefik's, since this host's ports 80 and 443 may be
-# taken. It reaches traefik at its address on the shared network instead, so
-# its own requests come from the network's gateway, which servewaf checks like
-# any visitor. Two runs at once on one docker host cannot both start, since
-# both would use the subnet compose.yaml names. The containers, the network,
-# the volumes, the image and the files the script makes are removed however it
-# ends; the gitea and traefik images stay, as the base images of a build do.
-# It needs network access. script/check does not run this.
-set -eu
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd -P)"
-ROOT="$(cd "$SCRIPT_DIR/.." && pwd -P)"
-
-# Named after this run, so that runs in other clones on the same host
-# never touch each other's.
-NAME="$("$SCRIPT_DIR/projectname")-gitea-setup-$$"
-IMAGE="$NAME-image"
-NETWORK="${NAME}_shared"
-VISITOR="$NAME-visitor"
-
-# The site's host name and gitea's image, as deploy/gitea/compose.yaml names
-# them. gitea's image also runs the container on the shared network.
-SITE="git.example.org"
-# gitea 1.27.3, 2026-08-29
-GITEA_IMAGE="gitea/gitea@sha256:87a67ee09d3ae0d1df5fda5dcda3e2a1f9236a45b0a59025d6e00e46adc43bef"
-
-# gitea's one user, who owns the repository.
-PASSWORD="owner-password"
-
-# The files the script makes, gitea's secret key for this run, and traefik's
-# and the gateway's addresses on the shared network once the setup runs.
-WORK=""
-secret_key=""
-traefik=""
-gateway=""
-
-cleanup() {
-    # So that a signal cannot stop it partway through.
-    trap '' HUP INT TERM
-    docker rm --force "$VISITOR" >/dev/null 2>&1 || true
-    if [ -n "$WORK" ]; then
-        compose down --volumes --remove-orphans --timeout 5 >/dev/null 2>&1 || true
-        rm -rf "$WORK"
-    fi
-    docker rmi --force "$IMAGE" >/dev/null 2>&1 || true
-}
-
-# compose <argument>...: docker compose on the setup, under this run's project
-# name, with the image built here, this run's secret key and no port of
-# traefik's published.
-compose() {
-    SMALLWEBWAF_IMAGE="$IMAGE" GITEA_SECRET_KEY="$secret_key" \
-        docker compose --project-name "$NAME" \
-        --file "$ROOT/deploy/gitea/compose.yaml" --file "$WORK/no-ports.yaml" "$@"
-}
-
-fail() {
-    echo "gitea-setup: $*; the last lines of each container's output:" >&2
-    compose logs --no-color --tail 30 >&2 || true
-    exit 1
-}
-
-# wait_for <what fails> <command>...: run the command every second until
-# it succeeds, for at most a minute.
-wait_for() {
-    failure="$1"
-    shift
-    tries=0
-    until "$@"; do
-        tries=$((tries + 1))
-        [ "$tries" -lt 60 ] || fail "$failure"
-        sleep 1
-    done
-}
-
-# logged <service> <text>...: a line of the service's output holds every text,
-# in any order.
-logged() {
-    lines="$(compose logs --no-color --no-log-prefix "$1" 2>&1)"
-    shift
-    for text in "$@"; do
-        lines="$(printf '%s\n' "$lines" | grep -F -e "$text")" || return 1
-    done
-}
-
-# send <path> <curl option>...: send a request for path to the site, at
-# traefik's address, and print the status of the answer, 000 for none. traefik
-# answers with a certificate it made itself, since the setup names no
-# certificate resolver.
-send() {
-    path="$1"
-    shift
-    curl --silent --show-error --insecure --max-time 30 --output /dev/null \
-        --write-out '%{http_code}' --resolve "$SITE:443:$traefik" "$@" \
-        "https://$SITE$path" || true
-}
-
-# routed: traefik passes a request for the site's front page on to gitea.
-routed() {
-    [ "$(send / 2>/dev/null)" = 200 ]
-}
-
-# site_git <git argument>...: run git as the owner, without the host's own git
-# settings, reaching the site at traefik's address. git gives up on a transfer
-# slower than 1000 bytes a second for 30 seconds.
-site_git() {
-    GIT_CONFIG_GLOBAL=/dev/null GIT_CONFIG_NOSYSTEM=1 git \
-        -c user.name=owner -c user.email=owner@example.invalid \
-        -c http.sslVerify=false -c "http.curloptResolve=$SITE:443:$traefik" \
-        -c http.lowSpeedLimit=1000 -c http.lowSpeedTime=30 "$@"
-}
-
-# address_of <service>: print the service's address on the shared network.
-address_of() {
-    docker inspect --format "{{(index .NetworkSettings.Networks \"$NETWORK\").IPAddress}}" \
-        "$(compose ps --quiet "$1")"
-}
-
-# passed_through <method> <path>: rproxy passed a request from the gateway for
-# path to gitea on servewaf's allow, and servewaf checked it: its report line
-# gives the client's counts and the Core Rule Set's score.
-passed_through() {
-    wait_for "rproxy logged no $1 $2 that servewaf allowed" logged rproxy \
-        "\"method\":\"$1\"" "\"path\":\"$2\"" "\"client_ip\":\"$gateway\"" \
-        '"disposition":"allow"'
-    wait_for "servewaf logged no check of $1 $2" logged servewaf \
-        '"servewaf_line":"report"' "\"method\":\"$1\"" "\"path\":\"$2\"" \
-        "\"client_ip\":\"$gateway\"" '"action":"forward"' '"counts":' '"waf_score":'
-}
-
-main() {
-    cd "$ROOT"
-    trap cleanup EXIT
-    trap 'exit 1' HUP INT TERM
-    WORK="$(mktemp -d)"
-    printf 'services:\n    traefik:\n        ports: !reset []\n' >"$WORK/no-ports.yaml"
-
-    docker build --no-cache -t "$IMAGE" .
-    secret_key="$(docker run --rm "$GITEA_IMAGE" gitea generate secret SECRET_KEY)"
-
-    # rproxy is healthy once gitea takes connections.
-    compose up --detach --quiet-pull --wait --wait-timeout 120 ||
-        fail "the setup did not start"
-    traefik="$(address_of traefik)"
-    gateway="$(docker network inspect --format '{{(index .IPAM.Config 0).Gateway}}' "$NETWORK")"
-    wait_for "traefik did not route the site to rproxy" routed
-
-    compose exec --user git gitea gitea admin user create --admin \
-        --username owner --password "$PASSWORD" --email owner@example.invalid \
-        --must-change-password=false >/dev/null || fail "creating gitea's user failed"
-    status="$(send /api/v1/user/repos --user "owner:$PASSWORD" \
-        --header "Content-Type: application/json" --data '{"name":"repo"}')"
-    [ "$status" = 201 ] || fail "creating the repository was answered $status"
-
-    status="$(send /owner/repo)"
-    [ "$status" = 200 ] || fail "the repository's page was answered $status"
-    passed_through GET /owner/repo
-    echo "gitea-setup: a page load passes through rproxy, and servewaf checks it"
-
-    wait_for "gitea did not log the visitor's address" logged gitea \
-        "GET /owner/repo for $gateway:"
-    echo "gitea-setup: gitea logs the visitor's address, not rproxy's"
-
-    site_git init --quiet --initial-branch=main "$WORK/repo"
-    echo "hello" >"$WORK/repo/README.md"
-    site_git -C "$WORK/repo" add README.md
-    site_git -C "$WORK/repo" commit --quiet --message "Add a README"
-    site_git -C "$WORK/repo" push --quiet \
-        "https://owner:$PASSWORD@$SITE/owner/repo.git" main ||
-        fail "the push failed"
-    passed_through POST /owner/repo.git/git-receive-pack
-    echo "gitea-setup: a push passes through rproxy, and servewaf checks it"
-
-    site_git clone --quiet "https://owner:$PASSWORD@$SITE/owner/repo.git" \
-        "$WORK/clone" || fail "the clone failed"
-    [ "$(cat "$WORK/clone/README.md")" = hello ] || fail "the clone lacks the README"
-    passed_through POST /owner/repo.git/git-upload-pack
-    echo "gitea-setup: a clone passes through rproxy, and servewaf checks it"
-
-    # A container on the shared network, as sandcastle is, asks for the site
-    # by its name, and so reaches traefik from its own address.
-    status="$(docker run --rm --name "$VISITOR" --network "$NETWORK" \
-        --entrypoint curl "$GITEA_IMAGE" --silent --insecure --max-time 30 \
-        --output /dev/null --write-out '%{http_code}' "https://$SITE/api/v1/version" ||
-        true)"
-    [ "$status" = 200 ] || fail "the request from the shared network was answered $status"
-    wait_for "servewaf logged no request from the shared network" logged servewaf \
-        '"servewaf_line":"report"' '"path":"/api/v1/version"' '"action":"forward"'
-    line="$(compose logs --no-color --no-log-prefix servewaf |
-        grep -F '"servewaf_line":"report"' | grep -F '"path":"/api/v1/version"')"
-    case "$line" in
-        *"\"client_ip\":\"$gateway\""*)
-            fail "the request from the shared network came from the gateway" ;;
-        *'"counts":'* | *'"waf_score":'*)
-            fail "servewaf checked the request from the shared network" ;;
-    esac
-    echo "gitea-setup: a request from the shared network skips the checks"
-
-    compose stop servewaf >/dev/null 2>&1 || fail "servewaf did not stop"
-    status="$(send /owner/repo)"
-    [ "$status" = 200 ] ||
-        fail "with servewaf stopped, the repository's page was answered $status"
-    wait_for "rproxy logged no request SWRP_DEFAULT_DISPOSITION decided" \
-        logged rproxy '"path":"/owner/repo"' '"default_disposition":true'
-    echo "gitea-setup: with servewaf stopped, gitea answers through rproxy"
-}
-
-main "$@"