Docs: rproxy runs behind any TLS-terminating reverse proxy (closes #388)

README, SPEC and docs no longer present traefik as the required front
proxy. The README gains "The reverse proxy in front", listing what that
proxy must do: forward plain HTTP to port 8080, keep Host, set
X-Forwarded-For and X-Forwarded-Proto, and connect from an address in
SWW_RPROXY_TRUSTED_PROXIES. traefik, Caddy and nginx appear as examples,
with the nginx headers spelled out since it sets none by default.

Model: opus-5-5

README.md

@@ -10,10 +10,11 @@ A web application firewall reads each request on its way to a web app and
 refuses the ones that look like abuse. `smallwebwaf` is one program, `sww`,
 shipped in one image, with two commands that do this together:
 
-- `sww rproxy` is a small reverse proxy in front of one app. It sits behind a
-  TLS-terminating proxy, such as traefik, nginx or Caddy. It asks `waf` about
-  each request, passes the allowed ones to the app, and passes the app's answers
-  back. It keeps nothing between requests and writes nothing to disk.
+- `sww rproxy` is a small reverse proxy in front of one app. It sits behind the
+  reverse proxy that terminates TLS, such as traefik, nginx or Caddy. It asks
+  `waf` about each request, passes the allowed ones to the app, and passes the
+  app's answers back. It keeps nothing between requests and writes nothing to
+  disk.
 - `sww waf` decides. It runs the checks and keeps the bans, the counters and
   each client's history. One `waf` serves many sites: a client banned through
   one site is refused on all of them, and its requests on all of them count
@@ -57,7 +58,8 @@ For the operator, it:
 
 Not built, and not planned:
 
-- TLS and routing by host name. Both stay with the TLS-terminating proxy.
+- TLS and routing by host name. Both stay with the reverse proxy in front of
+  `rproxy`.
 - Browser challenges such as captchas.
 - A web console, or a configuration file.
 - Defence against floods large enough to fill the host's network link.
@@ -89,9 +91,9 @@ accepts connections, whether or not `waf` answers; in `waf`'s container, once
 The usual setup is three containers on one private network:
 
 - the app;
-- `rproxy`, in front of the app, which the TLS-terminating proxy forwards to:
-  `SWW_RPROXY_WAF_BACKEND` names `waf` and `SWW_RPROXY_UPSTREAM_URL` names the
-  app;
+- `rproxy`, in front of the app, which the reverse proxy that terminates TLS
+  forwards to: `SWW_RPROXY_WAF_BACKEND` names `waf` and
+  `SWW_RPROXY_UPSTREAM_URL` names the app;
 - `waf`, with `SWW_COMMAND=waf` and a volume at `/var/lib/sww` for its state
   files.
 
@@ -101,39 +103,26 @@ you trust. Each further app adds its own container and its own `rproxy`, whose
 `SWW_RPROXY_WAF_BACKEND` names the same `waf`. The "Smallest setup" example
 below shows this shape.
 
-### The TLS-terminating proxy
+### The reverse proxy in front
 
-`rproxy` serves plain HTTP. It runs behind any TLS-terminating proxy, such as
-traefik, nginx or Caddy. The TLS-terminating proxy must:
+`rproxy` serves plain HTTP. It runs behind any reverse proxy that terminates
+TLS, such as traefik, nginx or Caddy. That proxy must:
 
 - forward each request to port 8080 of `rproxy` over plain HTTP;
 - keep the visitor's `Host` header;
 - add the visitor's address to `X-Forwarded-For`;
 - set `X-Forwarded-Proto` to the scheme the visitor used;
-- close an unused connection to `rproxy` in under 120 seconds;
 - connect to `rproxy` from an address in `SWW_RPROXY_TRUSTED_PROXIES`, by
   default `10.0.0.0/8`, `172.16.0.0/12` or `192.168.0.0/16`.
 
 From any other address, `rproxy` ignores the forwarded headers and takes the
-TLS-terminating proxy for the visitor. Every visitor then shares one address,
-and one ban.
+proxy for the visitor. Every visitor then shares one address, and one ban.
 
 traefik and Caddy keep the `Host` header and set both forwarded headers by
 default. traefik's Docker label
-`traefik.http.services.<name>.loadbalancer.server.port=8080` names the port.
-Caddy keeps an unused connection for 120 seconds by default, so its site
-shortens that to 90 seconds:
-
-```caddyfile
-reverse_proxy rproxy:8080 {
-    transport http {
-        keepalive 90s
-    }
-}
-```
-
-By default nginx sends the host in `proxy_pass` as `Host` and sets neither
-forwarded header, so its site sets all three:
+`traefik.http.services.<name>.loadbalancer.server.port=8080` names the port, and
+Caddy's `reverse_proxy rproxy:8080` needs nothing more. nginx sets none of the
+headers by default, so its site names them:
 
 ```nginx
 location / {
@@ -194,8 +183,8 @@ entrypoint starts `rproxy` and the app side by side, each as its own user. Run
 the app's image with `SWW_RPROXY_WAF_BACKEND` set. `deploy/example-app` is such
 an app, and the "`rproxy` beside the app" example below runs one.
 
-The app's TCP peer is `rproxy`. The app sees the headers the TLS-terminating
-proxy sent, with that proxy's address added to `X-Forwarded-For`. So the app
+The app sees the headers the reverse proxy in front sent, with that proxy's
+address added to `X-Forwarded-For`, from a TCP peer that is `rproxy`. So the app
 must trust `rproxy`'s address for forwarded headers. In a container of its own,
 `rproxy` is on the private network, which the usual default of a trusted-proxy
 setting covers. Beside the app, its address is `127.0.0.1` or `::1`, which the
@@ -208,9 +197,9 @@ private ranges leave out, so the app's own setting must name them too, as
   `healthy` for each container of `smallwebwaf`.
 - A log line with `"msg":"starting"` gives the version, the address and every
   setting in effect, with secrets masked.
-- A request to the site through the TLS-terminating proxy gets the app's answer.
-  `https://<site>/_sww/healthz` answers `ok`. `waf`'s log lines about the
-  request have `"action":"forward"`.
+- A request to the site through the reverse proxy in front gets the app's
+  answer. `https://<site>/_sww/healthz` answers `ok`. `waf`'s log lines about
+  the request have `"action":"forward"`.
 - To see a refusal without banning yourself, run `waf` with
   `SWW_WAF_MODE=observe` and ask for `/.env`. The request reaches the app.
   `waf`'s log lines have `"would_action":"temporarily_banned"` and

SPEC.md

@@ -3,7 +3,8 @@
 `smallwebwaf` is a web application firewall for self-hosted apps. It is one
 binary, `sww`, and two of its commands do the work:
 
-- `sww rproxy` is a reverse proxy between a TLS-terminating proxy and one app.
+- `sww rproxy` is a reverse proxy between one app and the reverse proxy that
+  terminates TLS.
 - `sww waf` decides what happens to each request, for many sites.
 
 This document says what it must do and why, each requirement once. Everything in
@@ -45,8 +46,8 @@ never as a time.
 
 ## Non-goals
 
-- TLS, certificates and routing by host name. Those are the job of the
-  TLS-terminating proxy, such as traefik, nginx or Caddy.
+- TLS, certificates and routing by host name. Those are the job of the reverse
+  proxy in front of `rproxy`, such as traefik, nginx or Caddy.
 - More than one app behind one `rproxy`. Each app has its own.
 - Browser challenges such as captchas or proof of work. If wanted, chain Anubis
   between `rproxy` and the app.
@@ -1945,7 +1946,7 @@ leave out a cookie only when its name matches exactly, case included.
 
 `SWW_WAF_BAN_RESPONSE` is `403` by default, which makes a ban easy to recognise
 when debugging; `429` and `close` are the alternatives. `close` does not leave
-the client unanswered: the TLS-terminating proxy answers `502`, as it does
+the client unanswered: the reverse proxy in front answers `502`, as it does
 whenever its backend drops a connection. `SWW_WAF_BAN_SCOPE_V4_PREFIX` widens an
 IPv4 ban to the surrounding netblock. The four ban lengths are under "Bans".
 
@@ -2772,9 +2773,10 @@ its whole body. The visitor gets that answer at once, and the connection closes
 after it.
 
 The largest request line and headers is 32 KiB. A kept-open connection is closed
-after 120 seconds idle. Neither has a setting. The TLS-terminating proxy should
+after 120 seconds idle. Neither has a setting. The reverse proxy in front should
 close an unused connection sooner, so that it never sends a request on a
 connection `rproxy` is closing. traefik closes one after 90 seconds by default.
+nginx, by default, opens a new connection for each request.
 
 What the visitor gets when a limit is passed:
 
@@ -2825,7 +2827,7 @@ chooses: `waf` runs `waf`, and with it unset the image runs `rproxy`.
 The usual setup is three containers on one private network:
 
 - the app;
-- `rproxy`, which the TLS-terminating proxy forwards to, with
+- `rproxy`, which the reverse proxy that terminates TLS forwards to, with
   `SWW_RPROXY_UPSTREAM_URL` naming the app and `SWW_RPROXY_WAF_BACKEND` naming
   `waf`;
 - `waf`, with `SWW_COMMAND=waf` and a volume for its state files.
@@ -2833,8 +2835,8 @@ The usual setup is three containers on one private network:
 Each further app adds its own container and its own `rproxy`, whose
 `SWW_RPROXY_WAF_BACKEND` names the same `waf` (see "Sites"). Anything on that
 network can reach an app around `rproxy`, and can ask `waf` questions or send it
-reports. So the network holds only what you trust. `README.md` lists what the
-TLS-terminating proxy must do.
+reports. So the network holds only what you trust. "The reverse proxy in front"
+in `README.md` lists what that proxy must do.
 
 ### `rproxy` in the app's container
 
@@ -2906,10 +2908,10 @@ process that stops at start is started again every second, not in a tight loop.
   container's output, which `docker logs` shows.
 - When a service exits, runit runs its `run` script again, and the container
   does not stop. Beside an app, the other process keeps running.
-- While `rproxy` is down, the TLS-terminating proxy answers `502`. While the app
-  is down, `rproxy` answers `502`, which is not a client offence. While `waf` is
-  down, `SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION` decides (see "Without an
-  answer from `waf`").
+- While `rproxy` is down, the reverse proxy in front answers `502`. While the
+  app is down, `rproxy` answers `502`, which is not a client offence. While
+  `waf` is down, `SWW_RPROXY_WAF_BACKEND_NO_ANSWER_DISPOSITION` decides (see
+  "Without an answer from `waf`").
 - Only faults found at start stop `waf`:
     - invalid configuration;
     - a lookup database that is missing or unreadable;
@@ -2942,24 +2944,24 @@ checks:
 - With `SWW_COMMAND` unset, empty or `rproxy`, it passes while `rproxy` answers
   that request on `127.0.0.1`, at the port in `SWW_RPROXY_LISTEN_ADDR`, and the
   app accepts connections at `SWW_RPROXY_UPSTREAM_URL`. It does not ask `waf`,
-  so that the site stays in the TLS-terminating proxy's routes while `waf` is
-  down.
+  so that the site stays in the routes of the reverse proxy in front while `waf`
+  is down.
 - With any other value, it fails with a message naming `SWW_COMMAND` and its
   value.
 
-A TLS-terminating proxy that reads Docker's health status, as traefik does,
-sends a container no requests until it shows as healthy. So the check runs every
-second from the container's start until it first passes, for up to a minute, and
-every 30 seconds after that. An app with a health check of its own can replace
-the image's `HEALTHCHECK` with one that checks both.
+A reverse proxy that reads Docker's health status, as traefik does, sends a
+container no requests until it shows as healthy. So the check runs every second
+from the container's start until it first passes, for up to a minute, and every
+30 seconds after that. An app with a health check of its own can replace the
+image's `HEALTHCHECK` with one that checks both.
 
 ### Ports
 
 `rproxy` listens on no port but the one in `SWW_RPROXY_LISTEN_ADDR`, 8080 by
-default, which the TLS-terminating proxy forwards to. It passes requests to the
+default, which the reverse proxy in front forwards to. It passes requests to the
 app at `SWW_RPROXY_UPSTREAM_URL`, `http://127.0.0.1:8081` by default. Another
-port may be set: the health check follows the setting, and the TLS-terminating
-proxy must name it, as traefik's port label
+port may be set: the health check follows the setting, and the reverse proxy in
+front must name it, as traefik's port label
 (`traefik.http.services.<name>.loadbalancer.server.port`) does. An app beside
 `rproxy` must leave that port free.
 
@@ -3002,9 +3004,9 @@ in `docs/settings.md` shows the commands.
 ### Forwarded headers
 
 The app's TCP peer is `rproxy`, and the `X-Forwarded-For` the app receives ends
-with the TLS-terminating proxy's address, which `rproxy` adds after the
+with the address of the reverse proxy in front, which `rproxy` adds after the
 visitor's. So the app must trust `rproxy`'s address for forwarded headers,
-besides the private address ranges the TLS-terminating proxy is on.
+besides the private address ranges that proxy is on.
 
 - In a container of its own, `rproxy`'s address is on the private network. The
   usual default for a trusted-proxy setting, the private ranges, covers it.

docs/request-log.md

@@ -68,8 +68,8 @@ Every one of these lines has:
 ### Request detail
 
 - `request_id`: the id `rproxy` made for the request when it arrived.
-- `peer_ip`: the address of `rproxy`'s TCP peer, normally the TLS-terminating
-  proxy.
+- `peer_ip`: the address of `rproxy`'s TCP peer, normally the reverse proxy in
+  front of it.
 - `forwarded_for`: the `X-Forwarded-For` header the visitor's request came with.
 - `client_group`: the client as rate limiting counts it, an IPv4 address as a
   /32 or an IPv6 group.

docs/settings.md

@@ -478,9 +478,9 @@ start, and an invalid value stops the start. Any can be given as a file, as a
   `10.0.0.0/8,172.16.0.0/12,192.168.0.0/16`): the netblocks whose
   `X-Forwarded-For` is believed. Set but empty, it trusts nothing. A client
   outside these netblocks cannot claim another address. Where other containers
-  reach `rproxy` directly, or visitors on a private network reach the
-  TLS-terminating proxy, they can name another address in the header. Narrowing
-  the setting to the TLS-terminating proxy's own network closes that gap.
+  reach `rproxy` directly, or visitors on a private network reach the reverse
+  proxy in front, they can name another address in the header. Narrowing the
+  setting to that proxy's own network closes that gap.
 
 ## The image's command