# sfdupes ## Description `sfdupes` is an MIT-licensed Go command-line tool by [@sneak](https://sneak.berlin) that finds candidate duplicate files, and whole duplicate directory trees, on large filesystems. It does this without reading every byte of every file. Two files count as duplicates when they have the same size and the same three SHA-256 hashes. A hash is a short fingerprint of a stretch of bytes. Two stretches with the same fingerprint are, in practice, identical. Two of the hashes cover the first and the last 64 KiB of the file. The third covers the whole file when the file is under 100 MiB. A match then proves identical content. At 100 MiB and above, the third hash covers only 1 MiB at each gigabyte. A large file is never read in full. A match between two large files is a strong candidate, not proof. `sfdupes` is meant for multi-terabyte servers, where reading every byte of every file takes too long. It has four subcommands. `scan` walks the filesystem and records the files it finds in an SQLite database. SQLite keeps a whole database in one file. The database is kept between runs. A rescan reads only new and changed files. That makes `scan` cheap enough to run every day from `cron`, the system's job scheduler. `report`, `trees` and `info` read the database alone and can run at any time. ## Getting Started ```sh make build export SFDUPES_DATABASE="$HOME/.local/share/sfdupes/db.sqlite" ./sfdupes scan /srv ./sfdupes report > dupes.tsv ./sfdupes trees > dupetrees.tsv ./sfdupes info ``` `scan` walks the trees named by its operands, the paths given after `scan` on the command line. The walk is the listing of every directory under them. `scan` keeps one database record per regular file. A regular file is an ordinary file, as opposed to a directory, a symlink or a device. `report` prints the file-level duplicates. `trees` prints the duplicate directory trees. `info` prints the database's path, size and record count. The database is `/var/lib/sfdupes/db.sqlite` unless `SFDUPES_DATABASE` names another file. The first `scan` creates it. `report`, `trees` and `info` write their data to stdout. Progress, warnings and errors go to stderr. stdout and stderr are a program's two output streams. The shell shows both on the terminal, and `>` redirects stdout alone. ### Install With Go installed, this builds and installs the newest tagged release: ```sh go install sneak.berlin/go/sfdupes@latest ``` `@main` installs the tip of the `main` branch instead: ```sh go install sneak.berlin/go/sfdupes@main ``` The binary goes to `$(go env GOPATH)/bin`, or to `$GOBIN` when that is set. `sfdupes --version` prints `sfdupes VERSION` and exits. For a binary from `go install`, `VERSION` is the version Go recorded in it. For `@latest` that is a release tag such as `v0.0.3`. For `@main` it is a pseudo-version, Go's version string for an untagged commit. That string ends in the commit's hash. A binary built from a clone carries the version `git describe --tags --always --dirty` prints in that clone, such as `v0.0.3` on a tagged commit. `VERSION` is `dev` when no version is known. To see everything Go recorded in an installed binary: ```sh go version -m "$(command -v sfdupes)" ``` From a clone, `make build` writes the binary to `./sfdupes`: ```sh git clone https://git.eeqj.de/sneak/sfdupes.git cd sfdupes make build ``` Copy the binary to `/usr/local/bin` for the `cron` job below. `make docker` builds a Docker image tagged `sfdupes`. The build first runs the tests and the linter, a checker for common mistakes in Go code (see "Build"). Inside the image `sfdupes` runs as root, with the database at its default path. Each `-v` flag below makes a bind mount, which shows a host directory at a path inside the container. Bind-mount `/var/lib/sfdupes` to keep the database between runs. Mount the tree to scan at the same path inside the container as on the host. Read-only access is enough. The database then records the host's paths, and so do the reports. ```sh make docker docker run --rm -v /srv:/srv:ro -v /var/lib/sfdupes:/var/lib/sfdupes \ sfdupes scan /srv docker run --rm -v /var/lib/sfdupes:/var/lib/sfdupes sfdupes report > dupes.tsv ``` ### Daily scan from `cron` Run `scan` as root, so that it can read every file. A path it cannot read is skipped with a warning and loses its database record. As the file `/etc/cron.d/sfdupes`: ``` 30 3 * * * root /usr/local/bin/sfdupes scan /srv 2>>/var/log/sfdupes.log || tail -n 3 /var/log/sfdupes.log ``` - The first scan creates `/var/lib/sfdupes/db.sqlite` and its directory. To keep the database elsewhere, put `SFDUPES_DATABASE=/path/to/db.sqlite` before the command on the same line. - `scan` writes nothing to stdout. Its stderr, appended here to `/var/log/sfdupes.log`, holds: - one line naming the database; - progress lines, as described under "Progress"; - a warning for each path it skips; - a line for each system or temporary directory the walk leaves out (see "Rules for the walk"); - a line for each path left out because its filesystem is one the kernel makes up or keeps in memory, such as `tmpfs`; - the summary line; - a warning when a report still has the database open as the scan ends (see "Concurrent reads"). - The log grows with every scan. Rotate it like any other log. - Skipped paths do not fail a scan. The scan exits 0 all the same, and `cron` sends no mail. - A scan that fails exits 1, with the reason among the last lines of the log. `tail` prints those lines, and `cron` mails them to root if the host can send mail. - A scan still running when the next one starts carries on. The new one fails at once, and the lines `cron` mails include `sfdupes: another scan is running (lock held on /var/lib/sfdupes/db.sqlite.lock)`. - `report`, `trees` and `info` need only read access to the database. The umask is the setting that removes permissions from the files a process creates. Under the usual umask of `022`, the first scan creates the database readable by every user. An unprivileged user can then run those three commands against root's database. ### Reading the reports Each row of `report` names two copies of one file. Each row of `trees` names two copies of one directory tree. Within a group of copies, the path that sorts first byte by byte is `first`. Every other path in the group is a `dupe` of it. `first` says nothing about which copy is the original or the oldest. Which copy to keep is your choice. A row is a candidate, not proof: - The reports show the files as they were at the last scan. A file may have changed or gone since. - A file of 100 MiB or more is compared only on samples of its content (see "Duplicate detection"). - Two paths that are hard links, two names for one file, are listed as duplicates. They share their data, so removing one frees nothing. Compare a pair byte for byte before removing either copy. For the row `/srv/a/big.iso`, `/srv/b/big-copy.iso`, `4294967296`: ```sh cmp /srv/a/big.iso /srv/b/big-copy.iso && echo identical [ /srv/a/big.iso -ef /srv/b/big-copy.iso ] && echo "hard links" ``` `cmp` prints nothing and exits 0 when every byte matches. Otherwise it reports where the files differ. The second line prints `hard links` when both paths are the same file. A path holding a special character, such as a tab, is escaped in the reports. The character is written as a backslash and one more character, `\t` for a tab (see "Report output format"). Undo the escapes before using such a path. `printf '%b'` does that, because every backslash in an escaped path starts an escape. The shell drops trailing newlines from the output of `$(...)`. To keep a newline at the end of a path, print an `x` after the path and remove it afterwards: ```sh p="$(printf '%bx' '/srv/a/tab\tname.txt')"; p="${p%x}" cmp "$p" /srv/b/tab-copy.txt ``` Check a `trees` row with `diff -r`. It compares the two trees file by file. It also names anything present in only one of them, such as an empty directory or a symlink. `trees` does not see those. ## Rationale Duplicate finders that hash every file in full do not scale to the target environment. That is about ten million files and 150 TB. The disks may be slow or busy. A ZFS storage pool, a set of disks managed as one filesystem, is busy while it rebuilds a disk. `sfdupes` reads a file under 100 MiB in full. It reads a larger file only at its two ends and at 1 MiB per gigabyte. A full read of a small file is cheap, and it makes the comparison exact. Reading samples cuts a 150 GiB file to about 150 MiB of reads, at the price of a comparison that is not exact. The hashes live in a database that is kept between runs. A rescan reads only the files that are new or whose size or modification time (mtime) changed. All analysis then works from the database alone. The goal is whole duplicated trees, not only single files. A download extracted twice, or a project copied once too often, is such a tree. It can be removed as a unit. ## Design ### Goals In order: 1. **Find whole duplicate trees, not just files.** The aim is to find places where the same set of files and directories exists at two or more paths. A whole subtree can then be removed at once. Tree-level detection is built on file-level detection. 2. **Bound the reads per file.** A file is read only when it is new or has changed. A file under 100 MiB is then read in full, and a larger one only at its ends and at 1 MiB per gigabyte. No file of 100 MiB or more is ever read in full. The target is a filesystem of about ten million files and 150 TB, on disks that may be slow or busy. During a scan, one small record per file is held in memory. It holds the path and the two values the walk compares, the size and the mtime. The hashes stay in the database. `report` holds the duplicate paths of one file size at a time. `trees` holds one entry per directory, plus the files of the directories it is reading. 3. **Rescan cheaply, analyze from the database.** The scan keeps its database between runs, and an unchanged file is never read again. `report`, `trees` and `info` work from the database alone and never touch the scanned filesystem. `scan` is built to run from `cron`. The reports run at any time, against what the database holds. 4. **Keep the streams apart.** Everything on stdout is machine-readable data. Everything for a human reader, such as progress and warnings, goes to stderr. ### Subcommands - `scan` walks the filesystem and updates the database to match it, one record per regular file. - `report` prints the file-level duplicate report from the database. - `trees` prints the duplicate-tree report from the database. - `info` prints the database's details. ``` sfdupes scan [--workers N] [-x] [--no-default-excludes] PATH... sfdupes report > dupes.tsv sfdupes trees > dupetrees.tsv sfdupes info sfdupes --version sfdupes [command] --help ``` A missing or unknown subcommand is a usage error, a mistake in the command line. `sfdupes` then prints the usage text, a summary of the commands and their flags, on stderr and exits 2. The reference below is also the program's specification. ## Non-goals - No byte-for-byte compare, and no deleting or linking of duplicates. The reports are advisory. Acting on them is your job. - The SQLite database is the only stored data. There are no export or import formats. - No daemon or filesystem watcher. Scheduling rescans is `cron`'s job. ## Reference ### Settings - `SFDUPES_DATABASE` names the database file. When it is unset or empty, the database is `/var/lib/sfdupes/db.sqlite`. There is no command-line flag for it. The path names the file exactly, whatever characters it holds. A relative path is relative to the working directory. - `--workers N` (`scan`) sets how many directories `scan` reads at once while it lists the trees. It also sets how many files `scan` reads at once while it hashes them. The default is the number of CPUs. `N` must be at least 1. A smaller value is a usage error, reported in one line on stderr with exit 2 before anything is scanned. - `-x`, `--one-file-system` (`scan`) keeps the walk of each operand on that operand's filesystem, as the same flag does for `du` and `rsync`. By default the walk also enters directories on other filesystems. - `--no-default-excludes` (`scan`) lets the walk enter the default excludes. Those are the system and temporary directories the walk otherwise leaves out, such as `/var/tmp` on Linux (see "Rules for the walk"). - `--version`, `-v` prints `sfdupes VERSION` (see "Install") to stdout and exits 0. It writes nothing to stderr. - `--help`, `-h`, alone or after a subcommand, prints the help text to stderr and exits 0. It writes nothing to stdout. `sfdupes scan --help` also lists the default excludes of the system it runs on, and the filesystem types the walk never records anything on. ### Duplicate detection Two files are duplicates when they have the same size and the same three hashes. A file's size and its three hashes together are its signature. `scan` computes the hashes and stores them in the database. `report` and `trees` group the files with the same signature, whichever scan recorded them. Every record holds three SHA-256 hashes: - `head`, the hash of the file's first 64 KiB; - `tail`, the hash of the file's last 64 KiB; - `content`, the content hash described below. The content hash depends on the file's size: - Under 100 MiB, it is the SHA-256 of the whole file. A match proves identical content. Two different files with the same SHA-256 are not a practical concern. - At 100 MiB and above, it is the SHA-256 of samples. A sample is the 1 MiB that starts at each gigabyte boundary, the first at offset 0 and the next at 1 GiB. The samples go into one hash in order. A sample that would run past the end of the file stops there. In a file of 64 KiB or less, each 64 KiB stretch is the whole file. All three hashes are then the hash of the whole file. An empty file has fixed hashes and is never opened. The sampled hash is not exact. Bytes outside the samples and outside the first and last 64 KiB are never read. Two large files that differ only in such bytes are reported as duplicates. That is the price of never reading a 150 GiB file end to end. Only files of the same size are compared, so their samples lie at the same offsets. A file under 100 MiB and one of 100 MiB or more never share a size. So a whole-file hash is never compared with a sampled one. `scan` reads a file only to hash it, and only when the file is new or has changed since its record was written. ### `scan` mode `scan` takes one or more `PATH` operands naming the trees to scan. There is no default. An operand may be a directory or a regular file. #### Operands - `scan` with no operand is a usage error. The usage text goes to stderr, and the exit code is 2. - An operand that does not exist is a fatal error. `scan` then stops before it walks anything, and exits 1. - Each operand is made absolute before the walk. A `.` or `..` in it is resolved as text, and symlinks are not followed. Each record is stored under that absolute path, so results do not depend on the working directory. - All operands belong to one scan, and one walk covers them all at once (see "Concurrency"). - An operand that repeats another is dropped before the walk, without a line. - An operand under another operand is dropped the same way, unless one of the cases below applies. No file is then reached twice. - An operand under another is kept, and walked on its own, when the inner operand or a directory between the two is one of these: - a default exclude (see "Rules for the walk"); - with `-x`, a directory on another filesystem than the outer operand. It is also kept when a directory between the two is on a filesystem that is not persistent. Such a filesystem is one the kernel makes up or keeps in memory (see "Rules for the walk"). The outer operand's walk does not enter such a directory, so the inner operand is walked on its own. For an inner operand that is a regular file, the check starts at its directory. - No other case keeps an operand under another. An operand reached through a symlinked directory below the outer operand is dropped too, without a line. The outer operand's walk does not follow the symlink, so no file under the inner operand is scanned. The records an earlier scan left under it are deleted. - An operand that is neither a regular file nor a directory is not scanned. `scan` prints a warning naming the path and what it is. It counts the operand as skipped and drops it. An operand beneath a dropped one is scanned all the same. The scan keeps the records beneath a dropped operand, unless another operand covers them. - An operand at or inside a directory named `.zfs` is never scanned, whether given alone or under another operand. The check looks at the path as given and at the path with its symlinks resolved. `scan` prints a warning naming the path, counts the operand as skipped and drops it. The records beneath it are kept, unless it lies under another operand. Then they are deleted, because that operand's walk never enters `.zfs` (see "Rules for the walk"). - An operand on a filesystem that is not persistent is dropped too. `scan` prints a line naming it and its filesystem type, and does not count it as skipped. - A scan whose every operand is dropped walks nothing and exits 0. #### What a scan does to the database `scan` brings the database in line with the filesystem under the scanned operands: - A file not yet in the database is hashed and inserted. - A file already in the database is not read again when its size and mtime match its record. The mtime matches when it is not newer than the recorded one. This is what makes a daily rescan cheap. - A file whose size differs, or whose mtime is newer, is hashed again. The mtime is compared to the nanosecond, as finely as the filesystem records it. A same-size rewrite counts as a change whenever the filesystem gives it a later mtime, even within the same second. - The scan deletes each record under a scanned operand whose file it could not verify. That covers deleted files, and paths the scan could not stat or read this run. To stat a file is to read its details, such as its size, without opening it. So the database holds only what the latest scan over each path could verify. A later successful scan adds such files again. - Records outside the scanned operands are left alone, so separate trees can be scanned on different schedules into one database. - The scan keeps every record at or below a path that the walk leaves out for one of these reasons: - it is a default exclude; - it is not on a persistent filesystem; - with `-x`, it is a directory on another filesystem than its operand. Such records count as outside the scanned operands. So with `-x`, a filesystem mounted under an operand can be scanned on its own schedule into the same database. An operand may lie at or inside a default exclude, or, with `-x`, at or inside a directory on another filesystem. Such an operand is walked on its own. Its walk verifies the records below it, so they are deleted when their files are gone. #### Phases `scan` runs four phases in order. Parallel work happens inside the walk and hash phases. 1. `load` reads the existing records. Each record under the operands is kept in memory by path, with its size and mtime, for the walk to compare against. 2. `walk` lists the trees under all operands. Several workers share one queue of directories to read. A worker is one thread of the program, and "Concurrency" says how many there are. Each worker reads one directory at a time. It hands the subdirectories it finds back to the queue, and it stats each regular file as it finds it. The walk compares each file with its record. An unchanged file needs nothing more. Every new or changed file is passed to the hash phase. 3. `hash` reads every new or changed file and computes its three hashes. Files are read in inode order. An inode is the filesystem's own record of a file. Files with nearby inode numbers usually lie near each other on disk. Reading them in that order spares a spinning disk from seeking back and forth. Paths that are hard links to one file are read once and share the result. A backup tree made of hard links therefore costs one read per file. Completed records are written to the database 10,000 at a time while hashing runs. So a scan interrupted after hours keeps everything hashed so far. 4. `update` writes the hashed records not yet written, then deletes the records the scan did not verify. Reading a tree one directory at a time waits on the disk at every step and takes hours at millions of files. Reading many directories at once is what makes the walk practical on large or busy storage pools. #### Rules for the walk - Only regular files are recorded. Every other kind of file, such as a symlink or a device node, is passed over. Symlinks are never followed. - The walk never enters a directory named `.zfs`. Such a directory holds the filesystem's ZFS snapshots, which are its saved earlier states. Walking it would list every file once per snapshot. `scan` never starts a walk at or inside one either (see "Operands"). - The walk never records the scan's own database files: - the database file; - its `.lock` file (see "The scan lock"); - the `-wal` and `-shm` files SQLite keeps beside it while the scan runs (see "Concurrent reads"). The walk knows them by device ID and inode number. The device ID is the number by which the kernel tells filesystems apart. The inode number tells the files of one filesystem apart. So the walk passes over them whatever path leads to them. The walk follows no symlink it finds. It does open each operand at the path given, even when that path runs through a symlinked directory. Such an operand can lead to the database files, and the walk passes over them there as well. The walk prints no line for the database files and does not count them as skipped. A record an earlier scan left for one of them is deleted. - By default the walk enters directories on other filesystems than its operand's. With `-x`, it never enters a directory on a different filesystem than its operand. `scan` prints no line for that directory and does not count it as skipped. The records below it are kept, as described under "What a scan does to the database". - The walk never records anything on a filesystem that is not persistent. A filesystem is not persistent when the kernel makes it up or keeps it in memory. These are the types, as `sfdupes scan --help` lists them on Linux and macOS: ``` proc, sysfs, devtmpfs, devpts, tmpfs, ramfs cgroup, cgroup2, debugfs, tracefs, securityfs, pstore bpf, configfs, fusectl, mqueue, hugetlbfs, efivarfs binfmt_misc, autofs, nsfs, rpc_pipefs, selinuxfs, devfs ``` `devfs` is the macOS filesystem of `/dev`. The others are Linux names. As it starts, `scan` lists the mounted filesystems and notes the device ID of each one of those types. On Linux the list comes from `/proc/self/mountinfo`, which gives each filesystem's own device ID. On macOS it comes from the system's mount list. There the device ID is read from the mount point, the directory the filesystem is mounted on. Where two filesystems share a mount point on macOS, the one mounted last counts. On any other system the list is empty. A list that `scan` cannot read is a fatal error, and nothing is scanned. No flag turns this rule off. The walk never enters a directory on one of those devices, and never records a file on one. That holds however the walk reaches the path, through a bind mount included. A bind mount shows a directory at a second path, and the files under it keep their device ID. For each path it leaves out this way, `scan` prints a line on stderr naming the path and its filesystem type: ``` scan: skipped /dev/shm (tmpfs, not a persistent filesystem) ``` The path is not counted as skipped. The records below it are kept, as described under "What a scan does to the database". - Below an operand, the walk does not enter a default exclude. The default excludes hold the kernel's view of the running system and temporary files, so that `sfdupes scan /` walks only the files worth comparing. They depend on the system, and `sfdupes scan --help` lists those of the system it runs on. On Linux they are: ``` /proc, /sys, /dev, /run, /tmp, /var/tmp ``` On macOS they are: ``` /dev, /private/tmp, /private/var/tmp, /private/var/vm /System/Volumes/VM, /System/Volumes/Data ``` A walk of `/` on macOS reaches everything in `/System/Volumes/Data` already, through firmlinks. Firmlinks are the links macOS uses to show the data volume inside the system volume. Walking `/System/Volumes/Data` as well would record each of those files twice. Any other system has no default excludes. An operand at or inside a default exclude is walked, so `sfdupes scan /tmp/x` works when `/tmp/x` is on a persistent filesystem. `--no-default-excludes` turns the default excludes off. What is not on a persistent filesystem stays left out. For each default exclude the walk does not enter, `scan` prints a line on stderr naming it: ``` scan: skipped /var/tmp (default exclude) ``` The directory is not counted as skipped. A default exclude on a filesystem that is not persistent, such as `/proc`, gets the line for its filesystem instead. One that is itself an operand gets no line, because it is walked as that operand. The scan keeps the records below a default exclude that the walk did not enter, as described under "What a scan does to the database". - A path that cannot be read, for lack of permission or any other error, gets a one-line warning on stderr and is skipped. The scan continues, and the summary line says how many paths were skipped. A skipped path that has a record from an earlier scan loses that record, and so does every path under an unreadable directory. The database mirrors what the latest scan could verify. - A file or directory that disappears while the scan runs is not an error. The scan prints no line for it and does not count it as skipped. A path gone when the walk reaches it gets no record, and so does a file gone when the hash phase opens it. The records an earlier scan left at or below it are deleted. #### Concurrency The walk phase and the hash phase each have `--workers` workers of their own. The walk works on several directories at once, and the hash phase on several files at once. On spinning disks both phases wait mostly on seeks, the time the disk head takes to move. A `--workers` value well above the CPU count can therefore help on storage pools with many disks. The main thread of the program owns the database writes and the progress counts. Each progress display draws from a thread of its own and never blocks the workers. #### What `scan` prints `scan` writes nothing to stdout. On stderr it prints, in this order: - one line naming the database (see "Database"); - for each dropped operand, in operand order, the warning or the line described under "Operands". An operand dropped as a repeat of another, or as lying under another, gets neither; - the progress display of each phase (see "Progress"). `scan` prints each warning for a skipped path as it happens. It prints a line the same way for each path left out as a default exclude or as not on a persistent filesystem; - the summary line; - a warning when a report still has the database open as the scan ends (see "Concurrent reads"). The summary line reports the files seen this run, by what happened to each, plus the skips: ``` scan: 123400 files seen (1200 added, 34 updated, 56 removed, 122166 unchanged), 3 skipped ``` `removed` counts deleted records, which are not part of the files seen. #### Stopping a scan `scan` stops cleanly on `SIGINT`, the signal Ctrl-C sends, or `SIGTERM`, the signal `kill` sends by default: - The workers stop taking work. Each finishes no more than the directory listing or the file it is reading. The progress display is finished. - The records hashed but not yet written are written, so the next scan does not hash them again. - Nothing else is written or deleted. Records are deleted only after a complete walk. So the records under paths an interrupted walk never reached are kept. - The database is closed and the lock released, as on any other exit. - The line `scan: interrupted after N files` goes to stderr. `N` is the number of files the walk reached. The exit code is 1. The next scan reads none of the files already recorded and brings the database up to date as usual. After the first signal `scan` stops catching signals. A second one ends it at once, as any uncaught signal does. The records not yet written are lost, and the database stays valid. `scan` catches `SIGTERM` even when it inherits it as ignored. A background job started from a script inherits `SIGINT` as ignored, and `scan` leaves it ignored. ### `report` mode `report` reads every record from the database. It takes no positional arguments. A positional argument is anything on the command line that is not a flag, such as the paths `scan` takes. `report` never touches the scanned filesystem. It neither stats nor opens any path in the records. It reads the database and writes to stdout and stderr, and nothing else. Its output is the same whether or not the scanned filesystem is still mounted. Processing: - Records are grouped by signature, the four values `(size, head, tail, content)`. - Every group with two or more paths is a duplicate group. - Within a group, paths are sorted in byte order. The first is `first`, and every other path is a `dupe`. - Groups are ordered by size, largest first, then by `first` path. The output is the same for the same database contents. `report` has two phases, each with its own progress display on stderr (see "Progress"). `open` opens the database. `read` counts the records, then reads them in signature order, largest size first. The database keeps an index named `files_signature`, a sorted list of the records by signature (see "Schema"). Reading it backwards gives that order, so SQLite sorts nothing and returns the first record at once. Records with one signature come together, and so do the records of one size. So `report` holds only the duplicate groups of the size it is reading. Once it reaches a smaller size, it writes them, ordered by `first` path. #### Report output format The report is TSV (tab-separated values) on stdout. It holds a header line, then one row per duplicate file. A group of N paths gives N-1 rows. ``` first dupe size /srv/a/big.iso /srv/b/big-copy.iso 4294967296 /srv/a/big.iso /srv/c/big-copy2.iso 4294967296 ``` Paths are raw bytes and may hold any byte except NUL, the zero byte. The path columns are escaped, so that every row stays one line of tab-separated fields. Four bytes are written as escapes: - a backslash as `\\`; - a tab as `\t`; - a newline as `\n`; - a carriage return as `\r`. Every other byte is written unchanged, including bytes that are not valid UTF-8, the usual text encoding. Undoing the four escapes gives back the stored path. Grouping and ordering use the stored path. The warnings `scan` prints are escaped the same way, so each warning stays one line. The summary line on stderr gives: - the records read; - the duplicate groups; - the dupe files, which is the number of rows; - the reclaimable bytes, the sum of `size` over all rows. ``` report: 14 records read, 5 duplicate groups, 8 dupe files, 10.0 KiB reclaimable ``` ### `trees` mode `trees` reads the same database as `report` and takes no positional arguments. It reports whole duplicate directory trees. Two directories are duplicate trees when they hold the same relative paths, and each path holds a file with the same signature in both. Like `report`, it never touches the scanned filesystem. It rebuilds the directory tree from the paths in the records, split on `/`. Definitions: - A file's **signature** is `(size, head, tail, content)`, as for `report`. The mtime is not part of it. - A directory's **digest** is a SHA-256 hash computed from the bottom up. Each child contributes one entry. A file's entry is its name and signature. A subdirectory's entry is its name and digest. The entries are sorted in byte order and hashed together. Names are part of the digest, so two trees whose files differ only in name are not duplicates. - Two directories are **duplicate trees** when their digests are equal. Equal digests imply the same number of files and the same total size. Processing: - `trees` builds the directory tree and computes every directory's digest. It then groups the directories by digest. Every group with two or more directories is a duplicate-tree group. - Only the outermost duplicate trees are reported. A group is left out when its members' parents are distinct directories that all have the same digest. The parents' group, or an ancestor's, already implies it. A group holding sibling directories, or members whose parents have different digests, is always reported. - Within a group, paths are sorted in byte order. The first is `first`, and every other path is a `dupe`. - Groups are ordered by total tree size, largest first, then by `first` path. The output is the same for the same database contents. Two limitations are accepted: - Hard-linked paths count toward duplicate trees. Their content is identical. They share storage, so removing one frees nothing. The scan uses the inode to avoid reading a file twice, and does not store it. - Only the regular files in the database define a tree. Empty directories are invisible. A file skipped during the scan in one copy but not in the other makes two otherwise identical trees differ. `trees` has four phases, each with its own progress display on stderr (see "Progress"). `open` opens the database. `read` counts the records, then reads them in path order. It builds the directory tree and computes the digests as it goes. `group` groups the directories by digest and picks the groups to report. `write` writes them to stdout. #### Trees output format The report is TSV on stdout, with a header line and then one row per duplicate tree. A group of N trees gives N-1 rows. `files` is the number of regular files in one copy of the tree, and `size` their total size in bytes: ``` first dupe files size /srv/a/project /srv/backup/project 3417 104857600 ``` The paths are escaped as described under "Report output format". The root directory's path is `/`. The summary line on stderr gives: - the records read; - the duplicate-tree groups; - the dupe trees, which is the number of rows; - the reclaimable bytes, the sum of `size` over all rows. ``` trees: 14 records read, 1 duplicate tree groups, 1 dupe trees, 3.0 KiB reclaimable ``` ### `info` mode `info` takes no positional arguments and prints the database's details on stdout, one per line. Each line holds a name and its value, separated by a tab. `info` opens the database read-only, as `report` does, so it runs during a scan and needs only read access. It never touches the scanned filesystem. ``` database /var/lib/sfdupes/db.sqlite (default) database file size 2147483648 (2.0 GiB) -wal file size 4124152 (3.9 MiB) modified 2026-10-16T12:02:50Z schema version 1 records 12345678 size of recorded files 150000000000000 (136.4 TiB) ``` - `database` is the path and where it came from, as on the line every subcommand prints first on stderr (see "Database"). - `database file size` and `-wal file size` are in bytes, then rounded to a unit such as MiB. The `-wal` line appears only while a `-wal` file is beside the database, as during a scan. - `modified` is when the database file was last changed, in UTC. While a scan runs, the newest changes may be in the `-wal` file alone (see "Concurrent reads"). - `schema version` is the version of the database's layout, read from `PRAGMA user_version` (see "Schema"). A database with another version than this build's is refused, as by `report`. - `records` is the number of records. `size of recorded files` adds up the sizes of all recorded files, in bytes, then rounded to a unit such as TiB. `info` has two phases, each with its own progress display on stderr (see "Progress"). `open` opens the database. `count` reads the schema version and counts the records in one transaction. A transaction is a group of reads or writes that SQLite carries out as one step, against the database as it stands at one moment. So both describe the database at one moment, even while a scan is writing. `info` writes its lines after the `count` display has ended. ### Database All four subcommands work on one SQLite database file. #### Location The database is the file `SFDUPES_DATABASE` names, when that is set and not empty, and otherwise `/var/lib/sfdupes/db.sqlite`. Each subcommand prints one line on stderr naming the database it uses, before anything else and whether or not stderr is a terminal. The line gives the path and where it came from: ``` scan: new database /var/lib/sfdupes/db.sqlite (default) trees: database /srv/tmp/sfdupes/db.db (from SFDUPES_DATABASE) ``` A relative path is printed with the working directory in front of it. The working directory is printed as `pwd -P` prints it, with its symlinks resolved. The rest of the path is printed as set, so a `..` in it stays. The line names the file the setting names. After a `cd` through a symlink, a `..` counts from the directory the symlink leads to, as it does for any other program. The printed path shows that directory. The path is escaped like the paths in a report. `scan` says `new database` when no file is at that path as it starts. `report`, `trees` and `info` print the line before they open the database, so the error for a missing database comes after it. #### Creation and access - `scan` creates the database and its parent directory on first use. - `report`, `trees` and `info` need an existing database. A missing database is a fatal error, exit 1. The error tells you to run `scan` first. - `report`, `trees` and `info` open the database read-only. They need read access to the database file and no write access to its directory. While the database has `-wal` and `-shm` files beside it (see "Concurrent reads"), they read those too. SQLite creates them with the database file's permissions. #### The scan lock Only one `scan` runs against a database at a time. - For its whole run, `scan` holds a lock on a lock file beside the database. The lock is taken with the `flock(2)` system call, and only one process can hold it. The lock file's name is the database's path, with symlinks resolved, plus `.lock`. By default that is `/var/lib/sfdupes/db.sqlite.lock`. Every path to one database therefore names the same lock file. - `scan` takes the lock before it walks the filesystem or opens the database. Just before that, it creates the database file, empty, if it is missing. So the lock file is named the same way before the first scan as after. A symlink at the database path is followed, and its target is created. - A second `scan` against the same database does not wait. It fails at once with a one-line error naming the lock file, and exits 1. It has walked nothing and opened nothing. The running scan carries on. - The lock file is created on first use and never deleted. Only its owner may open it. A leftover file blocks nothing. The lock ends with the process that holds it, however that process ends. Deleting the file while a scan runs would let a second scan start. - `report`, `trees` and `info` never take the lock, so they run during a scan. #### Concurrent reads - While `scan` runs, the database is in write-ahead log (WAL) mode. In WAL mode SQLite appends changes to a `-wal` file beside the database, and keeps a lookup table for that file in a `-shm` file. Readers do not block the writer, so running a report during a scan is safe. - Every connection has a busy timeout of 10 seconds. That is how long it waits for a database another connection has locked before it gives up. - The filesystem is authoritative, and the database follows it. Hashed records are written 10,000 at a time while the scan runs, so a report may see a scan's changes partly applied. A scan that dies partway leaves a valid database holding everything written so far, and the next scan carries on from there. - When `scan` closes the database, it switches it back to SQLite's default mode, called rollback-journal mode. In that mode the database file alone holds everything. Between scans a reader therefore needs no `-wal` or `-shm` file. Each switch needs the database to itself. A `scan` that starts while a report is still reading waits for it up to the busy timeout, then fails. A `scan` that ends while a report has the database open prints a warning and leaves the database in WAL mode until the next scan. `report` writes its rows while it reads. So it is still reading while a pager or a stalled pipe holds up its output. A pager, such as `less`, shows output one screen at a time and waits for a key press. #### What `scan` writes, and when - As it starts, before the walk, `scan` creates whichever of these are missing: - the database's directory; - an empty database file; - the `.lock` file. - Then, before the walk as well, it writes: - the `-wal` and `-shm` files, which stay beside the database while the scan runs; - in a new database, the table, the index and the schema version described under "Schema". - During the `load` and `walk` phases, no records are written. A first scan's database holds no records until the hash phase, however long its walk runs. - During the `hash` phase, records are written 10,000 at a time. - During the `update` phase, the rest of the hashed records are written, and the deletions are made. - As `scan` closes the database, the `-wal` and `-shm` files go away, unless a report still has the database open. #### Schema The schema is the database's layout, its table and its index. `PRAGMA user_version` holds the schema version, currently 1. A database with any other version is a fatal error. `scan` creates the table and the index and sets the version in one transaction (see "`info` mode"). So the three land together or not at all. A first scan stopped while doing so leaves an empty database, which the next scan sets up. A database at version 0 that already has a `files` table was not made by `sfdupes`. Every subcommand refuses it, with an error telling you to remove the file and rescan. ```sql CREATE TABLE files ( path BLOB PRIMARY KEY, -- absolute path, raw bytes size INTEGER NOT NULL, -- bytes mtime INTEGER NOT NULL, -- whole Unix seconds of the mtime mtime_nsec INTEGER NOT NULL, -- nanoseconds within that second head BLOB NOT NULL, -- raw 32-byte SHA-256 of the first 64 KiB tail BLOB NOT NULL, -- raw 32-byte SHA-256 of the last 64 KiB content BLOB NOT NULL -- raw 32-byte SHA-256; whole file under 100 MiB, else samples ) WITHOUT ROWID; CREATE INDEX files_signature ON files (size, head, tail, content); ``` - `path` is a BLOB, a column of raw bytes, because Unix paths are bytes and not necessarily UTF-8 text. - `mtime` holds the whole seconds of the file's mtime, rounded down, and `mtime_nsec` the nanoseconds past that second. Split this way, they hold any mtime a filesystem can record, even one before 1678 or after 2262. One 64-bit count of nanoseconds cannot hold those. They serve change detection only and are not part of the signature. - `head`, `tail` and `content` each hold the raw 32 bytes of a SHA-256 (see "Duplicate detection"). `report` and `trees` fail on a record whose hash is not 32 bytes. - `files_signature` lets `report` read the records in signature order without sorting the table. ### Progress Every subcommand always shows that it is working. Each phase gets a display of its own on stderr from the moment it starts. The display names the phase and shows its progress. The parts of its line are listed below. The phases, and what each display counts: - `scan` has four phases: - `[1/4] load` counts the records first, then reads them against that count. While it counts, the display says `counting the records`. - `[2/4] walk` has no exact total. Its estimate is the number of records under the operands, shown with a `~`. A scan with no records under its operands, such as a first scan, has no estimate. The time remaining is `unknown` when there is no estimate, and once the walk passes the estimate. - `[3/4] hash` and `[4/4] update` have exact totals. Only the files that need hashing count toward the hash total, so its time remaining is meaningful. - `report` has two phases: - `[1/2] open` has no total. The display says `opening the database`, also while it waits on a busy one. - `[2/2] read` counts the records first, then reads them against that count. It writes rows to stdout as it goes. - `trees` has four phases: - `[1/4] open` and `[2/4] read` are as for `report`, except that `read` writes nothing. - `[3/4] group` has the directories `read` found as its total. - `[4/4] write` has the duplicate-tree groups as its total. - `info` has two phases: - `[1/2] open` is as for `report`. - `[2/2] count` has no total either, because one request to the database counts everything. The display says `counting the records` until that request returns. Each display is one line holding: - the phase and its place among the phases; - the progress, written `[m/n] x%` for `m` items done of a total `n`, which is `x` percent of it. A phase that has no total shows the items done instead, as `1234 files`. A phase waiting for its total shows what it waits for, as `counting the records`, and no rate; - the current rate, in the items the phase counts, such as files or records. It covers the items completed over the last 5 seconds, or, when stderr is not a terminal, since the line before. It falls to 0 while nothing completes. A burst of items after a wait shows as a high rate for the next 5 seconds, then the rate falls again; - the elapsed time, labelled `elapsed`; - the time remaining, labelled `remain`, as a duration such as `12m9s` or as `unknown`. It comes from the phase's average rate since it started counting, so it does not swing with each burst. Example lines, as printed when stderr is not a terminal: ``` [3/4] hash: [12345/98765] 12%, 92 files/s, elapsed 2m32s, remain 17m44s [2/4] walk: [1234567/~1200000] 103%, 5120 files/s, elapsed 4m1s, remain unknown [3/4] hash: [12345/45678] 27%, stalled disk/db, elapsed 4m30s, remain 12m9s ``` When no item has completed for 10 seconds, the line says `stalled` and where the phase waits, in place of the rate. That happens while one large file is read, or while a disk or the database is slow. Each phase names the places it may wait in, and a phase that may wait in two places names both, as `disk/db`: - `walk` says `disk`, for files. - `hash` says `disk/db`, because it reads files and writes their records to the database between them. - `load`, `update` and the `read` phase of `trees` say `db`. - The `read` phase of `report` says `db/out`, because it writes the report to stdout while it reads. - `group` of `trees` says `cpu`, for work in memory, and its `write` says `out`. - A phase still waiting for its total says what it waits for, and nothing more. On a terminal: - Every display starts with a spinner, a turning character, followed by its line. The display is drawn again several times a second. So the spinner turns and the elapsed time keeps moving while a phase waits for its next item. - A phase with an exact total ends its line with its percent and a bar 10 columns wide, at the terminal's right edge. The percent after the count is left out then. A phase with nothing to do shows no bar. Every phase has an exact total once it has counted its work, except these: - `scan`'s `walk`; - the `open` phase of `report` and `trees`; - both phases of `info`. On a terminal 100 columns wide: ``` ⠹ [3/4] hash: [12345/98765], 92 files/s, elapsed 2m32s, remain 17m44s 12% |█ | ``` - No line reaches the terminal's last column, however narrow the terminal is. A line too wide for the terminal first leaves out its rate, the words of a stalled phase, or what the phase is waiting for. It leaves out its bar next. It is cut short at the edge only when the rest does not fit on its own. The rest is: - the phase and its place; - the progress, when the phase shows one; - the elapsed time; - the time remaining. That happens hours into a scan of millions of files, on a terminal narrower than about 75 columns. A terminal made narrower while a phase runs is fitted at the next draw. - A warning printed during a phase lands on a line of its own, never inside the display. So does every line written to stdout when stdout and stderr are the same file. That is one terminal, or one pipe or file that both are sent to. When they are not the same file, stdout is written without waiting on the display. The display then keeps being drawn while a slow reader holds up stdout. When stderr is not a terminal, such as a pipe or a file, there are no redraws. Each phase prints its line: - as it starts; - every 5 seconds while it runs, whether or not an item has completed; - once more as it ends. A phase that stops short of its total, as an interrupted one does, keeps showing the count it stopped at. ### Error handling and exit codes - `0`: success, even when files were skipped with warnings. - `1`: a fatal error, or a `scan` stopped by `SIGINT` or `SIGTERM`. A fatal error is one of these: - an operand that does not exist, or whose details `scan` cannot read; - a list of mounted filesystems that `scan` cannot read; - another `scan` already running against the same database; - a database that cannot be created or opened, or whose reads or writes fail, its directory and its lock file included; - a relative database path when the working directory cannot be read; - a database with another schema version, or one at version 0 that already has a `files` table; - a record with a hash that is not 32 bytes, read by `report` or `trees`; - a missing database for `report`, `trees` or `info`; - a failed write to stdout. - `2`: a usage error, which is one of these: - a missing or unknown subcommand; - an unknown flag; - a flag without its value, or with a value that cannot be parsed, such as `--workers abc`; - `scan` with no operand; - `--workers` below 1; - `report`, `trees` or `info` with a positional argument. A fatal error is reported in one line on stderr that starts with `sfdupes:`. A failed write to stdout, such as a full disk, is reported the same way. Two cases never reach `sfdupes` as a failed write: - The reader of a stdout pipe may exit early, as `head` does in `sfdupes report | head`. The next write then ends `sfdupes` with `SIGPIPE`, the signal for a write to a closed pipe. `sfdupes` ends quietly and without a summary, as `cat` or `sort` would. The shell reports the signal, status 141 in most shells, not exit 1. - When stdout is closed outright, as in `sfdupes report >&-`, the Go runtime opens `/dev/null` in its place before `sfdupes` starts. The output is discarded, and the run succeeds, as with `> /dev/null`. ## Entrypoints This repository follows the [Scripts to Rule Them All](https://github.com/github/scripts-to-rule-them-all) standard. The executables in `script/` are the entrypoints of the development workflow, and the `Makefile` targets call them, except `build` and `clean` (see "Build"). Every script runs under plain `sh`, the standard Unix shell. It finds the repository root itself, so it can be run from any directory. - `script/bootstrap` installs what building and developing need. It can be run again at any time, and installed tools are kept. `git`, `make` and `go` are checked for presence only. A missing one is installed with the first of these package managers found on the host: - `nix`; - `apt`; - `brew`; - `apk`. Then come `node` and `yarn`. `prettier`, the Markdown formatter, is a `node` program. `yarn` is the package manager that installs it: - An installed `node` is used when its major version is 22. A `yarn` already on `PATH` is then used as it is. When `yarn` is missing, `yarn` 1.22.22 is activated through `corepack`, the `yarn` installer that ships with `node`. When there is no `corepack` either, `npm`, the package manager that ships with `node`, installs it. - Otherwise the script installs `node` 22.17.0 through `nvm`, a `node` version manager, and activates `yarn` 1.22.22 under that `node` through `corepack`. When `nvm` is missing, the script first downloads it and checks the archive's SHA-256. `yarn install --frozen-lockfile` then installs the `prettier` that `package.json` and `yarn.lock` pin. The linter is never installed. It runs in Docker (see `script/lint`). `docker` is not installed either. `make check` and `make docker` both need it. The script ends with `go mod download`. - `script/setup` makes a fresh clone ready for development. It runs `script/bootstrap`, then `script/install-precommit`. - `script/projectname` prints `sfdupes`. Scripts that need the name call it, so they stay identical across repositories. - `script/test` runs the test suite under the race detector, Go's check for unsynchronized access to memory from several threads. The suite runs with a 90-second timeout, and its coverage of the code is measured. On failure it reruns the suite verbosely, so that the log names the failing test. It builds only the `test` stage of the `Dockerfile` and writes no image. A stage is one named part of the `Dockerfile`, which starts from an image of its own and can be built alone. The race detector needs cgo, Go's bridge to C code, and a C compiler. The stage therefore starts from a Debian `golang` image, which has the C compiler `gcc`. The image is pinned by its digest, its content hash. The tests run as the user `nobody`, because several of them make a file unreadable, and root reads it anyway. - `script/lint` runs the linter, `golangci-lint`, which checks the Go sources for common mistakes. It builds only the `lint` stage of the `Dockerfile` and writes no image. The stage starts from the `golangci/golangci-lint` image, pinned by its digest, and runs three build steps: - the `gofmt` check, which fails on a Go source that `gofmt`, Go's own formatter, would change; - `golangci-lint config verify`, which checks the linter's settings file `.golangci.yml`; - `golangci-lint run`, which lints the Go sources. A successful build is a clean lint. The linter never runs on the host, so a working `docker` is the one thing linting needs. - `script/fmt` formats the Go sources with `gofmt -s -w` and every Markdown file with `prettier`, in place. `prettier` indents by 4 spaces and wraps prose, as `.prettierrc` sets and as the script also passes on the command line. It wraps at 80 columns, its default width. Both run on the host. `prettier` runs through `yarn` at the version `yarn.lock` pins. When the `node` on `PATH` is not `node` 22, the script loads the `node` 22.17.0 that `script/bootstrap` installed. - `script/fmt-check` is the read-only form of `script/fmt`. It names any unformatted file and exits non-zero instead of writing. `gofmt` and `prettier` both run every time, and each names itself when it fails. The `Dockerfile`'s `lint` stage runs the same `gofmt` check. - `script/check` runs three scripts in order, and changes nothing: - `script/test` and `script/lint`, which need `docker`; - `script/fmt-check`, which needs what `script/bootstrap` installs. - `script/docker` builds the Docker image, tagged with the name from `script/projectname`. It passes the output of `git describe --tags --always --dirty`, or `unknown` when that is empty, to the `Dockerfile` as the build argument `VERSION`. A build argument is a value that a `docker build` hands to the `Dockerfile`. The build stage depends on the `lint` and `test` stages, so this also runs the tests and the linter. - `script/cibuild` runs `script/bootstrap` and then `script/check`. Then it builds the image as `script/docker` does. The Gitea workflow in `.gitea/workflows/check.yml` runs it on every push. A successful run means every check passed. The tests and the linter run twice, once in `script/check` and again as stages of the image build. - `script/precommit` runs from the `git` pre-commit hook, a script that `git` runs before each commit. It fails the commit when `go mod tidy` would change anything. Then it runs `script/check`. - `script/install-precommit` installs `.git/hooks/pre-commit`, which runs `script/precommit`. Every `docker build` in `script/` passes a new `CACHEBUST` build argument. In every stage of the `Dockerfile`, `ARG CACHEBUST` comes after the steps that install system packages and download the Go modules. Every step that checks or compiles the code comes after it. Every `RUN` step after it runs again on each build. Without that, Docker would serve the test and lint steps from its cache on an unchanged tree, and the build would pass without running them. The steps above `ARG CACHEBUST` stay cached until something they depend on changes, such as `go.mod`. Go's build cache is kept between builds, so only what changed is compiled again. The tests run with `-count=1`, so no test reports a stored result. `golangci-lint run` keeps the linter's own cache as well, so an unchanged package is not linted again. ## Build The `script/` entrypoints above hold the implementations. Each `Makefile` target does nothing but call its script, except `build` and `clean`, which have commands of their own: - `make` or `make build` builds the `sfdupes` binary with cgo disabled. Building is the default target. - `make bootstrap` installs the build and development dependencies. - `make setup` prepares a fresh clone: `bootstrap`, then the pre-commit hook. - `make test` runs the test suite under the race detector, in Docker (see `script/test`). It needs `docker`. - `make lint` runs the linter and the `gofmt` check, in Docker (see `script/lint`). It needs `docker`. - `make fmt` formats the Go sources and the Markdown on the host, and `make fmt-check` checks them without writing. Both need `go` and what `make bootstrap` installs. - `make check` runs `script/check`, described above, and changes nothing. It needs `docker` and what `make bootstrap` installs. - `make docker` builds the Docker image, which runs the tests and the linter as build stages. - `make hooks` installs the pre-commit hook. - `make clean` removes the binary. ### Constraints - The language is Go. The module is `sneak.berlin/go/sfdupes`, and the binary is `sfdupes`. - The code imports these modules beyond the standard library: - `github.com/spf13/cobra`, for the command line; - `github.com/schollz/progressbar/v3`, for the progress display; - `golang.org/x/term`, to tell whether stderr is a terminal; - `modernc.org/sqlite`, the SQLite driver; - `golang.org/x/sys`, for the scan lock and the list of mounted filesystems. No other dependency outside the standard library is added. - The code stays pure Go, with no C code. Building on one system for another is not a goal. `modernc.org/sqlite` is pure Go too, so the binary builds without cgo. The `Makefile` exports `CGO_ENABLED=0`. The test build is the one exception, because the race detector needs cgo (see `script/test`). - `report` and `trees` give the same output for the same database contents, whatever order the records were inserted in. ### Definition of done All of the following, run in this directory, must pass: 1. `make check` passes. 2. `make docker` succeeds. 3. The test below behaves as described. It builds a throwaway tree in a new directory under `/var/tmp`, which is on a persistent filesystem. On many systems `/tmp` is a `tmpfs`, which `scan` leaves out. Never test against real data. ```sh d=$(mktemp -d /var/tmp/sfdupes.XXXXXX) export SFDUPES_DATABASE="$(mktemp -d /var/tmp/sfdupes.XXXXXX)/db.sqlite" mkdir -p "$d/a" "$d/b" head -c 2000 /dev/urandom > "$d/a/one.bin" cp "$d/a/one.bin" "$d/b/copy.bin" cp "$d/a/one.bin" "$d/b/copy2.bin" head -c 2000 /dev/urandom > "$d/a/unique.bin" # same size, different content printf 'x' > "$d/tiny1"; printf 'x' > "$d/tiny2" # 1-byte duplicates printf 'y' > "$d/tiny3" # 1-byte non-duplicate : > "$d/empty1"; : > "$d/empty2" # empty duplicates # duplicate trees: t1 and t2 are identical; t3 differs by one filename mkdir -p "$d/t1/sub" "$d/t2/sub" "$d/t3/sub" head -c 3000 /dev/urandom > "$d/t1/f1" head -c 100 /dev/urandom > "$d/t1/sub/f2" cp "$d/t1/f1" "$d/t2/f1" cp "$d/t1/sub/f2" "$d/t2/sub/f2" cp "$d/t1/f1" "$d/t3/f1" cp "$d/t1/sub/f2" "$d/t3/sub/f2renamed" ./sfdupes scan "$d" ./sfdupes report ./sfdupes trees # incremental behavior (scan a subtree; records elsewhere persist): ./sfdupes scan "$d/a" # everything unchanged, nothing hashed printf 'z' >> "$d/a/one.bin" # modify: next scan re-hashes it rm "$d/a/unique.bin" # delete: next scan removes its record ./sfdupes scan "$d/a" # 1 updated, 1 removed ./sfdupes report ``` Expected from the first `report`: - `one.bin`, `copy.bin` and `copy2.bin` form one group of two rows. `first` is the path that sorts first. - `t1/f1`, `t2/f1` and `t3/f1` form one group. - `t1/sub/f2`, `t2/sub/f2` and `t3/sub/f2renamed` form one group. - `tiny1` and `tiny2` form a pair, and so do `empty1` and `empty2`. - `unique.bin` and `tiny3` appear nowhere. - The groups come in order of size, largest first. `trees` prints exactly one row, `$d/t1` as `first` and `$d/t2` as `dupe`. The row shows 2 files and 3100 bytes. The two `sub` directories are left out, because the `t1` and `t2` group implies them. `t3` appears nowhere, since one of its file names differs. After the rescan, the second `report` shows `one.bin` out of its group, because its content changed. `copy.bin` and `copy2.bin` remain as one pair. `unique.bin` is gone from the database. The test suite automates this scenario (see `scan_test.go`). It also checks that `report` and `trees` never touch the scanned filesystem. ## TODO Tracked in [`TODO.md`](TODO.md). ## License MIT. See [`LICENSE`](LICENSE). ## Author [@sneak](https://sneak.berlin)