README.md

@@ -152,16 +152,28 @@ All three subcommands operate on a single SQLite database file:
     use. `report` and `trees` require an existing database; a missing
     database file is a fatal error (exit 1) telling the user to run
     `scan` first.
--   The database uses WAL journal mode and a busy timeout, so running a
-    report while a cron `scan` is in progress is safe. The filesystem
-    is authoritative; the database is an eventually-consistent
-    reflection of it. Hashed records are committed in batched
-    transactions while the scan is still running (keeping the WAL
-    small and letting concurrent reports observe progress), so a
-    report may see a scan's changes partially applied, and a scan
-    that dies partway leaves a valid database holding everything
-    hashed so far; the next scan skips those records and converges
-    toward the filesystem.
+-   While `scan` runs, the database is in WAL journal mode with a busy
+    timeout, so running a report while a cron `scan` is in progress is
+    safe. The filesystem is authoritative; the database is an
+    eventually-consistent reflection of it. Hashed records are
+    committed in batched transactions while the scan is still running
+    (keeping the WAL small and letting concurrent reports observe
+    progress), so a report may see a scan's changes partially applied,
+    and a scan that dies partway leaves a valid database holding
+    everything hashed so far; the next scan skips those records and
+    converges toward the filesystem.
+-   `scan` switches the database back to rollback-journal mode when it
+    closes it, so between scans the database file alone holds the whole
+    database. Each switch needs the database to itself: a `scan` that
+    starts while a report is still reading waits for it up to the
+    10-second busy timeout, then fails; a `scan` that ends while a
+    report has the database open warns and leaves the database in WAL
+    mode until the next scan.
+-   `report` and `trees` open the database read-only and need only read
+    access to the database file, and no write access to its directory.
+    While the database is in WAL mode they also read the `-wal` and
+    `-shm` files beside it, which SQLite creates with the database
+    file's permissions.
 -   Schema (`PRAGMA user_version` is the schema version, currently 1; a
     database with any other version is a fatal error):
 

TODO.md

@@ -29,6 +29,10 @@
 
 # Completed Steps
 
+- `report` and `trees` open the database read-only, and `scan` leaves it
+  out of WAL mode, so reading needs only read access (2026-10-03, closes
+  https://git.eeqj.de/sneak/sfdupes/issues/8)
+
 - escape tabs, newlines, carriage returns and backslashes in report,
   trees and warning paths; the root directory's path is `/`
   (2026-10-03, https://git.eeqj.de/sneak/sfdupes/issues/7)

db.go

@@ -74,16 +74,24 @@ func databasePath() string {
 	return defaultDatabasePath
 }
 
-// openDB opens the SQLite database at path with WAL journaling and a
-// busy timeout, so a report can run while a cron scan is in progress.
-// It does not create or verify the schema.
-func openDB(path string) (*sql.DB, error) {
-	dsn := "file:" + path +
-		"?_pragma=busy_timeout(10000)" +
+// scanParams are the connection parameters for scan: read-write, with
+// WAL journaling and a busy timeout, so a report can run while a cron
+// scan is in progress. closeScanDatabase leaves WAL mode again.
+const scanParams = "_pragma=busy_timeout(10000)" +
 	"&_pragma=journal_mode(WAL)" +
 	"&_pragma=synchronous(NORMAL)"
 
-	db, err := sql.Open("sqlite", dsn)
+// reportParams are the connection parameters for report and trees:
+// read-only, with the same busy timeout. They set no journal mode,
+// because setting one is a write.
+const reportParams = "mode=ro" +
+	"&_pragma=busy_timeout(10000)" +
+	"&_pragma=query_only(1)"
+
+// openDB opens the SQLite database at path with the connection
+// parameters params. It does not create or verify the schema.
+func openDB(path, params string) (*sql.DB, error) {
+	db, err := sql.Open("sqlite", "file:"+path+"?"+params)
 	if err != nil {
 		return nil, fmt.Errorf("open database %s: %w", path, err)
 	}
@@ -104,7 +112,7 @@ func openScanDatabase(ctx context.Context, path string) (*sql.DB, error) {
 		return nil, fmt.Errorf("create database directory: %w", err)
 	}
 
-	db, err := openDB(path)
+	db, err := openDB(path, scanParams)
 	if err != nil {
 		return nil, err
 	}
@@ -119,6 +127,24 @@ func openScanDatabase(ctx context.Context, path string) (*sql.DB, error) {
 	return db, nil
 }
 
+// closeScanDatabase switches the database at path from WAL back to
+// rollback-journal mode and closes it. Out of WAL mode the database
+// file alone holds the whole database, so a reader needs no -wal or
+// -shm file beside it, nor write access to create them. The switch
+// fails while a report has the database open; the database then stays
+// in WAL mode, still readable, until a later scan closes it.
+func closeScanDatabase(ctx context.Context, db *sql.DB, path string) {
+	// Runs on the way out of a cancelled scan too.
+	_, err := db.ExecContext(context.WithoutCancel(ctx),
+		"PRAGMA journal_mode = DELETE")
+	if err != nil {
+		fmt.Fprintf(os.Stderr, "scan: database %s left in WAL mode: %v\n",
+			path, err)
+	}
+
+	_ = db.Close()
+}
+
 // openReportDatabase opens an existing database for the report and
 // trees subcommands. A missing database file is an error directing the
 // user to run scan first; the schema version must match exactly.
@@ -134,7 +160,7 @@ func openReportDatabase(ctx context.Context,
 		return nil, fmt.Errorf("database: %w", err)
 	}
 
-	db, err := openDB(path)
+	db, err := openDB(path, reportParams)
 	if err != nil {
 		return nil, err
 	}

db_test.go

@@ -5,6 +5,7 @@ import (
 	"database/sql"
 	"errors"
 	"fmt"
+	"os"
 	"path/filepath"
 	"slices"
 	"strings"
@@ -130,6 +131,49 @@ func TestOpenReportDatabaseOK(t *testing.T) {
 	_ = db.Close()
 }
 
+func TestCloseScanDatabaseWhileReportOpen(t *testing.T) {
+	t.Parallel()
+
+	// A report holding the database open stops scan from taking it out
+	// of WAL mode. The -wal and -shm files must then stay beside it, so
+	// that a later report still needs only read access.
+	path := testDBPath(t)
+
+	scanDB, err := openScanDatabase(t.Context(), path)
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	reportDB, err := openReportDatabase(t.Context(), path)
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	closeScanDatabase(t.Context(), scanDB, path)
+
+	_ = reportDB.Close()
+
+	_, err = os.Stat(path + "-wal")
+	if err != nil {
+		t.Fatalf("no -wal left: the switch out of WAL mode was not "+
+			"stopped: %v", err)
+	}
+
+	makeReadOnly(t, path)
+
+	reportDB, err = openReportDatabase(t.Context(), path)
+	if err != nil {
+		t.Fatalf("openReportDatabase: %v", err)
+	}
+
+	defer func() { _ = reportDB.Close() }()
+
+	_, err = loadFileRows(t.Context(), reportDB)
+	if err != nil {
+		t.Fatalf("loadFileRows: %v", err)
+	}
+}
+
 func TestApplyChangesRoundTrip(t *testing.T) {
 	t.Parallel()
 

main_test.go

@@ -44,6 +44,44 @@ func assertNoSidecars(t *testing.T, path string) {
 	}
 }
 
+// makeReadOnly takes write permission away from the database at path,
+// from any WAL sidecar beside it, and from their directory, as for a
+// user reading a database that a root cron scan keeps. Root ignores
+// file permissions, so it skips the test when run as root.
+func makeReadOnly(t *testing.T, path string) {
+	t.Helper()
+
+	if os.Geteuid() == 0 {
+		t.Skip("root ignores file permissions")
+	}
+
+	err := os.Chmod(path, 0o400)
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	for _, suffix := range walSuffixes {
+		err = os.Chmod(path+suffix, 0o400)
+		if err != nil && !errors.Is(err, fs.ErrNotExist) {
+			t.Fatal(err)
+		}
+	}
+
+	dir := filepath.Dir(path)
+
+	//nolint:gosec // reaching the database needs the search bit
+	err = os.Chmod(dir, 0o500)
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	// Runs before t.TempDir's own cleanup, which must delete the files.
+	t.Cleanup(func() {
+		//nolint:gosec // removing the directory needs its search bit back
+		_ = os.Chmod(dir, 0o700)
+	})
+}
+
 // captureStdout redirects os.Stdout to a file for the rest of the test
 // and returns a function reading back everything written to it. Only
 // machine-readable data belongs on stdout (README design goal 4), so
@@ -91,13 +129,13 @@ func captureStdout(t *testing.T) func() string {
 // brokenDatabase writes a database that opens cleanly and passes the
 // schema-version check but has no files table, so the first query
 // fails with the database already open: a fatal error on a path that
-// owns an open database.
+// owns an open database. It closes the database the way scan does.
 func brokenDatabase(t *testing.T) string {
 	t.Helper()
 
 	path := testDBPath(t)
 
-	db, err := openDB(path)
+	db, err := openDB(path, scanParams)
 	if err != nil {
 		t.Fatal(err)
 	}
@@ -108,10 +146,7 @@ func brokenDatabase(t *testing.T) string {
 		t.Fatal(err)
 	}
 
-	err = db.Close()
-	if err != nil {
-		t.Fatal(err)
-	}
+	closeScanDatabase(t.Context(), db, path)
 
 	return path
 }
@@ -144,7 +179,10 @@ func TestOpenDatabaseKeepsWALWhileOpen(t *testing.T) {
 
 func TestRunFatalAfterOpenClosesDatabase(t *testing.T) {
 	// Every subcommand that owns an open database must close it when
-	// it fails: no os.Exit between the open and the return.
+	// it fails: no os.Exit between the open and the return. The
+	// sidecar check is evidence of the close only for scan: report and
+	// trees only read a database that is out of WAL mode, which leaves
+	// nothing on disk whether they close it or not.
 	cases := map[string][]string{
 		cmdScan:   {cmdScan},
 		cmdReport: {cmdReport},
@@ -395,3 +433,41 @@ func TestRunTreesSucceeds(t *testing.T) {
 
 	assertNoSidecars(t, path)
 }
+
+func TestRunReportsNeedOnlyReadAccess(t *testing.T) {
+	// README §Database: report and trees need only read access to the
+	// database file. With its directory read-only as well, SQLite
+	// cannot create any file beside it.
+	path := testDBPath(t)
+	t.Setenv(databaseEnv, path)
+
+	dupes := scanFixture(t)
+	assertNoSidecars(t, path)
+	makeReadOnly(t, path)
+
+	cases := map[string]string{
+		cmdReport: "first\tdupe\tsize\n" +
+			dupes[0] + "\t" + dupes[1] + "\t300\n",
+		cmdTrees: "first\tdupe\tfiles\tsize\n" +
+			filepath.Dir(dupes[0]) + "\t" + filepath.Dir(dupes[1]) +
+			"\t1\t300\n",
+	}
+
+	for name, want := range cases {
+		var stderr bytes.Buffer
+
+		stdout := captureStdout(t)
+
+		code := run([]string{name}, &stderr)
+		if code != exitOK {
+			t.Errorf("run(%s) = %d, want %d; stderr: %s",
+				name, code, exitOK, stderr.String())
+
+			continue
+		}
+
+		if got := stdout(); got != want {
+			t.Errorf("%s stdout = %q, want %q", name, got, want)
+		}
+	}
+}

report.go

@@ -31,9 +31,9 @@ type scanRec struct {
 // loadRecords opens the database and reads every file record for the
 // report and trees subcommands. Any database problem — including a
 // missing database — is fatal. The error is returned rather than
-// exiting, so that the deferred close — which checkpoints the SQLite
-// WAL — always runs; the database is closed before the caller formats
-// its output, so it stays closed even if that output fails.
+// exiting, so that the deferred close always runs; the database is
+// closed before the caller formats its output, so it stays closed even
+// if that output fails.
 func loadRecords(ctx context.Context) ([]scanRec, error) {
 	dbPath := databasePath()
 

scan.go

@@ -87,8 +87,9 @@ type fileMeta struct {
 // hash only when its size, head, and tail match another file's. Flag
 // parsing and the at-least-one-operand check are done by cobra. Errors
 // are returned rather than exiting, so that the deferred close — which
-// checkpoints the SQLite WAL — always runs. Cancelling ctx unwinds the
-// worker pools and aborts the scan with the context's error.
+// takes the database out of WAL mode — always runs. Cancelling ctx
+// unwinds the worker pools and aborts the scan with the context's
+// error.
 func runScan(ctx context.Context, roots []string, workers int,
 	oneFS bool,
 ) error {
@@ -108,7 +109,7 @@ func runScan(ctx context.Context, roots []string, workers int,
 		return err
 	}
 
-	defer func() { _ = db.Close() }()
+	defer closeScanDatabase(ctx, db, dbPath)
 
 	st, err := syncScan(ctx, db, roots, workers, oneFS)
 	if err != nil {