Show the progress rate over the last 5 seconds, and what a phase is doing after 10 seconds with no item done (closes #125)

The rate was the phase's average, so a burst after a long wait read as
over 1,000 files a second. It now covers the items completed over the
last 5 seconds, or since the line before off a terminal; the ETA still
comes from the average. Once no item has completed for 10 seconds, the
rate gives way to "stalled" and what the phase is doing, as "stalled
reading", kept whole with the phase, progress, elapsed time and ETA, so
only the bar gives way before them. report's read phase says
"read/write", as it writes the report while it reads. The tests set the
display's clock by hand.

Deviation: the stall words hold no time; with one, no words naming the
work fit beside the rest at 80 columns.
Judgement call: trees' group phase says "grouping".

Model: opus-5-5

README.md

@@ -833,17 +833,34 @@ Each display is one line holding:
 - a `[m/n] x%` display (items processed / total items, percent); before a phase
   has a total, the items processed, or what the phase is waiting for
 - current rate (items/s), naming the items the phase counts: files, records,
-  directories or groups
+  directories or groups. It covers the items completed over the last 5 seconds,
+  or, when stderr is not a terminal, since the line before, so it falls to 0
+  while nothing completes, and a burst of items after a wait shows as a burst
+  rather than as a steady rate. Once no item has completed for 10 seconds, the
+  word `stalled` and what the phase is doing take the rate's place (see below).
 - elapsed time
-- estimated time remaining, or `unknown`
+- estimated time remaining, or `unknown`. It comes from the phase's average rate
+  since it started counting, so that it does not swing with each burst.
 
 Example shape (exact layout is flexible, content is not):
 
 ```
 [3/5] hash: [12345/98765] 12% |████      | 92 files/s elapsed 2:32 eta 17:54
 [2/5] walk: [1234567/~1200000] 103%, 5120 files/s, elapsed 4m1s, eta unknown
+[3/5] hash: [12345/45678] 27%, stalled reading, elapsed 4m30s, eta 12m9s
 ```
 
+When no item has completed for 10 seconds, as while one large file is read, a
+disk is slow or the database is busy, the line says `stalled` and what the phase
+is doing in place of the rate, which would read 0: `walk` is `listing`
+directories; `hash` and the content phase's reads are `reading` files; `update`
+is `writing` to the database; `load` and the `read` phase of `trees` are
+`reading` the database; the content phase's checks are `searching` the database;
+`trees`' `group` is `grouping` directories, and its `write` is `writing` the
+report. The `read` phase of `report` writes the report while it reads the
+records and may be waiting on either, so it says `read/write`. A phase still
+waiting for its total already says what it waits for, and says nothing more.
+
 Additional requirements:
 
 - On a terminal, a phase with an exact total (every phase but `scan`'s `walk`,
@@ -855,15 +872,18 @@ Additional requirements:
   times a second, so its elapsed time keeps moving while a phase waits for its
   next item.
 - On a terminal no line reaches the terminal's last column, however narrow the
-  terminal is. The phase and its place, the progress, the elapsed time and the
+  terminal is. The phase and its place, the progress, what a stalled phase is
-  ETA are kept whole: a line too wide for the terminal leaves out its rate first
+  doing, the elapsed time and the ETA are kept whole: a line too wide for the
-  (or what the phase is waiting for), and a bar with no room beside those four
+  terminal leaves out its rate (or what the phase is waiting for), and a bar
-  gives way to the spinner. Only when those four alone are too wide, as on a
+  with no room beside the parts kept whole gives way to the spinner. The words a
+  stalled phase shows are short, so that a line like the stalled one in the
+  example above, with tens of thousands of files and times in minutes, fits on
+  an 80-column terminal. Only when the parts kept whole are too wide, as on a
   terminal narrower than about 70 columns hours into a scan of millions of
-  files, is the line cut short at the terminal's edge, so the end of the ETA is
+  files, or about 90 once the phase has stalled, is the line cut short at the
-  lost first. A terminal made narrower while a phase runs gets the same: the
+  terminal's edge, so the end of the ETA is lost first. A terminal made narrower
-  next draw erases the line within the new width and fits the line to it, and
+  while a phase runs gets the same: the next draw erases the line within the new
-  the display goes on redrawing in place.
+  width and fits the line to it, and the display goes on redrawing in place.
 - When stderr is not a terminal (a pipe, a file, `/dev/null`), do not emit ANSI
   redraws: print the line the moment each phase starts, every 5 seconds while it
   runs (whether or not an item has completed, and never more often), and once

TODO.md

@@ -29,6 +29,18 @@
 
 # Completed Steps
 
+- the rate a progress display shows covers the items completed over the last 5
+  seconds, or since the line before when stderr is not a terminal, so it falls
+  to 0 while nothing completes, and a burst after a wait no longer reads as a
+  steady rate of over 1,000 files a second; the ETA still comes from the phase's
+  average. Once no item has completed for 10 seconds, the word `stalled` and
+  what the phase is doing take the rate's place, as `stalled reading`, each
+  phase naming its own work where it is defined; `report`'s `read` says
+  `read/write`, as it writes the report while it reads. Those words are kept
+  whole with the phase, progress, elapsed time and ETA, so only the bar gives
+  way before them, and they fit on an 80-column terminal in an ordinary scan
+  (2026-10-16, https://git.eeqj.de/sneak/sfdupes/issues/125)
+
 - new subcommand `info` prints the database's details on stdout, one per line as
   a name, a tab and the value: its path and where it came from, the sizes of the
   database file and of its `-wal` file when there is one, when the database file

progress.go

@@ -22,6 +22,15 @@ const plainInterval = 5 * time.Second
 // a TTY.
 const redrawInterval = 100 * time.Millisecond
 
+// rateWindow is the time the rate a display shows covers: the items
+// completed over the last rateWindow, which is the time since the line
+// before when stderr is not a TTY.
+const rateWindow = 5 * time.Second
+
+// stallTime is how long a phase goes with no item completed before its
+// line says it has stalled, and what it is doing, in place of the rate.
+const stallTime = 10 * time.Second
+
 // spinnerType selects the progressbar library's spinner style.
 const spinnerType = 14
 
@@ -59,6 +68,10 @@ const (
 	openingDatabase = "opening the database"
 )
 
+// reading is what the display of a phase that reads files or records
+// says it is doing once it has stalled; see stallTime.
+const reading = "reading"
+
 // stderrIsTTY reports whether stderr is attached to a terminal.
 func stderrIsTTY() bool {
 	return term.IsTerminal(int(os.Stderr.Fd()))
@@ -89,6 +102,14 @@ type progressParams struct {
 	total      int64  // the items the phase will complete; -1 when not known
 	estimate   bool   // total is an estimate, which the count may pass
 	waitingFor string // what the phase waits for until setTotal is called
+	doing      string // what the phase is doing, as "reading"; see stallTime
+}
+
+// drawnCount is the count of items completed as of one draw, and when
+// that draw was.
+type drawnCount struct {
+	at    time.Time
+	count int64
 }
 
 // progress renders one phase's progress on stderr. On a TTY the
@@ -107,9 +128,10 @@ type progressParams struct {
 // phase's helpers without rendering anything, and its writer writes
 // with no display to clear.
 type progress struct {
-	width func() int    // reads the terminal's width; nil when not a TTY
+	now   func() time.Time // reads the time
-	stop  chan struct{} // closed by finish to end the draws
+	width func() int       // reads the terminal's width; nil when not a TTY
-	done  chan struct{} // closed once the draws have ended
+	stop  chan struct{}    // closed by finish to end the draws
+	done  chan struct{}    // closed once the draws have ended
 
 	mu         sync.Mutex
 	bar        *progressbar.ProgressBar // what the library draws; nil until then
@@ -120,33 +142,42 @@ type progress struct {
 	total      int64
 	estimate   bool
 	waitingFor string
+	doing      string
 	count      int64
 	start      time.Time // when the phase started, for the elapsed time
-	rateStart  time.Time // when the count started, for the rate
+	rateStart  time.Time // when the count started, for the ETA
+	lastItem   time.Time // when the last item was completed, or the count started
+	// drawn holds the count at each draw over the last rateWindow, oldest
+	// first; the rate counts from the first. It keeps the draw before the
+	// latest even when that is older, as the line before is when lines
+	// are plainInterval apart and a tick comes late.
+	drawn []drawnCount
 }
 
 // newProgress starts the display of one phase on stderr.
 func newProgress(params progressParams) *progress {
 	if stderrIsTTY() {
-		return startProgress(params, terminalWidth, redrawInterval)
+		return startProgress(params, terminalWidth, redrawInterval, time.Now)
 	}
 
-	return startProgress(params, nil, plainInterval)
+	return startProgress(params, nil, plainInterval, time.Now)
 }
 
 // startProgress shows the phase params describes at once, and again
 // every interval until finish: with the progressbar library on a
 // terminal, whose width each draw reads by calling width, or as a plain
-// line when width is nil.
+// line when width is nil. The display reads the time by calling now.
 func startProgress(params progressParams, width func() int,
-	interval time.Duration,
+	interval time.Duration, now func() time.Time,
 ) *progress {
-	now := time.Now()
+	start := now()
 	p := &progress{
-		width: width, stop: make(chan struct{}), done: make(chan struct{}),
+		now: now, width: width,
+		stop: make(chan struct{}), done: make(chan struct{}),
 		label: params.label, unit: params.unit, total: params.total,
 		estimate: params.estimate, waitingFor: params.waitingFor,
-		start: now, rateStart: now,
+		doing: params.doing, start: start, rateStart: start,
+		lastItem: start, drawn: []drawnCount{{at: start}},
 	}
 
 	// Show the zero state at once: the first item may take minutes,
@@ -173,13 +204,22 @@ func startProgress(params progressParams, width func() int,
 }
 
 // draw shows the phase's progress: on a TTY in place of the line
-// before, and otherwise as a plain line.
+// before, and otherwise as a plain line. It first adds the count to
+// drawn, then drops from drawn the draws older than rateWindow, except
+// the one before this draw.
 func (p *progress) draw() {
 	p.mu.Lock()
 	defer p.mu.Unlock()
 
+	now := p.now()
+
+	p.drawn = append(p.drawn, drawnCount{at: now, count: p.count})
+	for len(p.drawn) > 2 && now.Sub(p.drawn[0].at) > rateWindow {
+		p.drawn = p.drawn[1:]
+	}
+
 	if p.width == nil {
-		text, _ := p.line(math.MaxInt, true)
+		text, _ := p.line(now, math.MaxInt, true)
 		fmt.Fprintln(os.Stderr, text)
 
 		return
@@ -192,13 +232,13 @@ func (p *progress) draw() {
 	// total of 0 leaves the bar nothing to fill.
 	text, withBar := "", false
 	if p.total > 0 && !p.estimate {
-		text, withBar = p.line(width-barMargin, false)
+		text, withBar = p.line(now, width-barMargin, false)
 	}
 
 	margin := barMargin
 	if !withBar {
 		margin = spinnerMargin
-		text, _ = p.line(width-margin, true)
+		text, _ = p.line(now, width-margin, true)
 	}
 
 	// The library makes a bar or a spinner, and before each draw erases
@@ -255,18 +295,22 @@ func (p *progress) newBar(withBar bool, width int) {
 }
 
 // setTotal gives a phase that started without a total its total, once
-// it is known. The rate, and so the ETA, count from then on: the time
+// it is known. The rate, the ETA and the time with no item completed
-// spent waiting for the total says nothing about how fast items go.
+// count from then on: the time spent waiting for the total says nothing
+// about how fast items go.
 func (p *progress) setTotal(total int64) {
 	if p == nil {
 		return
 	}
 
+	now := p.now()
+
 	p.mu.Lock()
 	defer p.mu.Unlock()
 
 	p.total = total
-	p.rateStart = time.Now()
+	p.rateStart, p.lastItem = now, now
+	p.drawn = []drawnCount{{at: now, count: p.count}}
 }
 
 // increment records one completed item, which the display shows at its
@@ -276,10 +320,13 @@ func (p *progress) increment() {
 		return
 	}
 
+	now := p.now()
+
 	p.mu.Lock()
 	defer p.mu.Unlock()
 
 	p.count++
+	p.lastItem = now
 }
 
 // warnf prints a one-line warning to stderr without corrupting the
@@ -391,41 +438,53 @@ func (p *progress) finish() {
 	}
 }
 
-// line formats the phase's progress in at most room columns, as
+// line formats the phase's progress as of now in at most room columns,
+// as
 //
 //	[3/5] hash: [1234/5000] 25%, 300 files/s, elapsed 4s, eta 13s
 //
 // where "files" is the phase's unit, without the percent when percent
 // is false, as before the library's bar, which shows its own. A phase
-// with no total shows the items done instead, or what it waits for.
+// with no total shows the items done instead, or what it waits for. The
+// rate is that since the first draw in drawn, and the ETA comes from
+// the rate since the count started. Once no item has been completed for
+// stallTime, the rate, which would read 0, gives way to the word
+// "stalled" and what the phase is doing, as "stalled reading".
 //
-// The phase and its place, the progress, the elapsed time and the ETA
+// The phase and its place, the progress, what a stalled phase is doing,
-// are kept whole. A line wider than room leaves out the rate, or what
+// the elapsed time and the ETA are kept whole. A line wider than room
-// the phase waits for; only if it is still wider is it cut at room, and
+// leaves out the rate, or what the phase waits for; only if it is still
-// line reports that it does not fit. Every part is ASCII, so its length
+// wider is it cut at room, and line reports that it does not fit. Every
-// is its width in columns. p.mu must be held.
+// part is ASCII, so its length is its width in columns. p.mu must be
-func (p *progress) line(room int, percent bool) (string, bool) {
+// held.
-	elapsed := time.Since(p.start).Round(time.Second)
+func (p *progress) line(now time.Time, room int,
+	percent bool,
+) (string, bool) {
+	elapsed := now.Sub(p.start).Round(time.Second)
 
 	// head and tail hold the parts kept whole; extra, between them, is
 	// the part left out.
 	var head, extra, tail string
 
 	if p.total < 0 && p.waitingFor != "" {
-		head, extra = p.label+": ", p.waitingFor
+		head, extra = p.label+": ", p.waitingFor+", "
 		tail = fmt.Sprintf("elapsed %s, eta unknown", elapsed)
 	} else {
-		rate := 0.0
+		since := p.drawn[0]
-		if s := time.Since(p.rateStart).Seconds(); s > 0 {
+		rate := perSecond(p.count-since.count, now.Sub(since.at))
-			rate = float64(p.count) / s
+		average := perSecond(p.count, now.Sub(p.rateStart))
-		}
 
 		head = p.label + ": " + p.itemsDone(percent) + ", "
-		extra = fmt.Sprintf("%.0f %s/s", rate, p.unit)
+		extra = fmt.Sprintf("%.0f %s/s, ", rate, p.unit)
-		tail = fmt.Sprintf("elapsed %s, eta %s", elapsed, p.eta(rate))
+		tail = fmt.Sprintf("elapsed %s, eta %s", elapsed, p.eta(average))
+
+		if now.Sub(p.lastItem) >= stallTime {
+			head += "stalled " + p.doing + ", "
+			extra = ""
+		}
 	}
 
-	full, kept := head+extra+", "+tail, head+tail
+	full, kept := head+extra+tail, head+tail
 
 	switch {
 	case len(full) <= room:
@@ -437,6 +496,16 @@ func (p *progress) line(room int, percent bool) (string, bool) {
 	return kept[:max(room, 0)], false
 }
 
+// perSecond returns count items over d as items a second, or 0 when no
+// time has passed.
+func perSecond(count int64, d time.Duration) float64 {
+	if d <= 0 {
+		return 0
+	}
+
+	return float64(count) / d.Seconds()
+}
+
 // itemsDone formats the items done, as "[1234/5000] 25%", with "~"
 // before a total that is an estimate and without the percent when
 // percent is false, or as "1234 files", in the phase's unit, when the

progress_test.go

@@ -6,7 +6,9 @@ import (
 	"math"
 	"os"
 	"path/filepath"
+	"slices"
 	"strings"
+	"sync"
 	"testing"
 	"time"
 	"unicode/utf8"
@@ -20,6 +22,29 @@ const testRedraw = time.Millisecond
 // it expects.
 const testDeadline = 5 * time.Second
 
+// testClock is a clock a test moves by hand, for a display that reads
+// it from its own goroutine too.
+type testClock struct {
+	mu  sync.Mutex
+	now time.Time
+}
+
+// Now returns the clock's time.
+func (c *testClock) Now() time.Time {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+
+	return c.now
+}
+
+// Add moves the clock on by d.
+func (c *testClock) Add(d time.Duration) {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+
+	c.now = c.now.Add(d)
+}
+
 //nolint:paralleltest // replaces the process-wide os.Stderr
 func TestStderrIsTTYFalseForNonTerminals(t *testing.T) {
 	r, pipe, err := os.Pipe()
@@ -72,11 +97,13 @@ func TestPhaseLabel(t *testing.T) {
 }
 
 // TestProgressLine checks the line a display shows in each state, ten
-// seconds into the phase.
+// seconds into the phase, with no draw since the first and the last
+// item just completed.
 func TestProgressLine(t *testing.T) {
 	t.Parallel()
 
-	ago := time.Now().Add(-10 * time.Second)
+	now := time.Now()
+	ago := now.Add(-10 * time.Second)
 
 	cases := []struct {
 		p    *progress
@@ -129,30 +156,43 @@ func TestProgressLine(t *testing.T) {
 	}}
 
 	for _, tc := range cases {
-		tc.p.start, tc.p.rateStart = ago, ago
+		tc.p.start, tc.p.rateStart, tc.p.lastItem = ago, ago, now
+		tc.p.drawn = []drawnCount{{at: ago}}
 
-		if got, _ := tc.p.line(math.MaxInt, true); got != tc.want {
+		if got, _ := tc.p.line(now, math.MaxInt, true); got != tc.want {
 			t.Errorf("line = %q, want %q", got, tc.want)
 		}
 	}
 }
 
 // TestLineFitsRoom checks how a line is fitted to the room it has, ten
-// seconds into the phase: it leaves out the rate, or what the phase
+// seconds into the phase, and fifty into a phase with no file read for
-// waits for, and is cut only when what is left is still too wide.
+// the last 42: it leaves out the rate, or what the phase waits for, but
+// not what a stalled phase is doing, and is cut only when what is left
+// is still too wide.
 func TestLineFitsRoom(t *testing.T) {
 	t.Parallel()
 
-	ago := time.Now().Add(-10 * time.Second)
+	now := time.Now()
+	ago := now.Add(-10 * time.Second)
 	hash := &progress{
 		label: scanPhase("hash"), unit: scanUnit, total: 100, count: 20,
-		start: ago, rateStart: ago,
+		start: ago, rateStart: ago, lastItem: now,
+		drawn: []drawnCount{{at: ago}},
 	}
 	content := &progress{
 		label: scanPhase("content"), total: -1,
 		waitingFor: "searching the database", start: ago, rateStart: ago,
 	}
 
+	started := now.Add(-50 * time.Second)
+	stalled := &progress{
+		label: scanPhase("hash"), unit: scanUnit, total: 100, count: 20,
+		doing: reading, start: started, rateStart: started,
+		lastItem: now.Add(-42 * time.Second),
+		drawn:    []drawnCount{{at: now.Add(-rateWindow), count: 20}},
+	}
+
 	cases := []struct {
 		p       *progress
 		room    int
@@ -180,10 +220,20 @@ func TestLineFitsRoom(t *testing.T) {
 		p: content, room: 40, percent: true,
 		want: "[5/5] content: elapsed 10s, eta unknown",
 		fits: true,
+	}, {
+		p: stalled, room: 65, percent: true,
+		want: "[3/5] hash: [20/100] 20%, stalled reading, elapsed 50s, " +
+			"eta 3m20s",
+		fits: true,
+	}, {
+		p: stalled, room: 64, percent: true,
+		want: "[3/5] hash: [20/100] 20%, stalled reading, elapsed 50s, " +
+			"eta 3m20",
+		fits: false,
 	}}
 
 	for _, tc := range cases {
-		got, fits := tc.p.line(tc.room, tc.percent)
+		got, fits := tc.p.line(now, tc.room, tc.percent)
 		if got != tc.want || fits != tc.fits {
 			t.Errorf("line(%d, %t) = %q, %t, want %q, %t",
 				tc.room, tc.percent, got, fits, tc.want, tc.fits)
@@ -192,27 +242,37 @@ func TestLineFitsRoom(t *testing.T) {
 }
 
 // TestSetTotalStartsRate checks that setTotal starts a phase's rate,
-// and so its ETA, from when the total becomes known, not from when the
+// its ETA and its time with no record read from when the total becomes
-// phase started waiting for it.
+// known, not from when the phase started waiting for it.
 func TestSetTotalStartsRate(t *testing.T) {
 	t.Parallel()
 
-	waited := time.Now().Add(-20 * time.Second)
+	clock := &testClock{now: time.Now()}
+	waited := clock.Now().Add(-20 * time.Second)
 	p := &progress{
-		label: scanPhase("load"), unit: scanUnit, total: -1, start: waited,
+		now: clock.Now, label: scanPhase("load"), unit: scanUnit, total: -1,
-		rateStart: waited,
+		doing: reading, start: waited, rateStart: waited,
+		lastItem: waited, drawn: []drawnCount{{at: waited}},
 	}
 
 	p.setTotal(100)
 
-	// Ten seconds after the total came, without waiting ten seconds,
+	// Ten seconds after the total came, no record has been read yet.
-	// 20 records are read.
+	clock.Add(10 * time.Second)
-	p.start = p.start.Add(-10 * time.Second)
-	p.rateStart = p.rateStart.Add(-10 * time.Second)
-	p.count = 20
 
-	want := "[1/5] load: [20/100] 20%, 2 files/s, elapsed 30s, eta 40s"
+	want := "[1/5] load: [0/100] 0%, stalled reading, elapsed 30s, " +
-	if got, _ := p.line(math.MaxInt, true); got != want {
+		"eta unknown"
+	if got, _ := p.line(clock.Now(), math.MaxInt, true); got != want {
+		t.Errorf("line = %q, want %q", got, want)
+	}
+
+	// Then 20 are.
+	for range 20 {
+		p.increment()
+	}
+
+	want = "[1/5] load: [20/100] 20%, 2 files/s, elapsed 30s, eta 40s"
+	if got, _ := p.line(clock.Now(), math.MaxInt, true); got != want {
 		t.Errorf("line = %q, want %q", got, want)
 	}
 }
@@ -272,13 +332,137 @@ func TestPlainProgressPrintsWhileWaiting(t *testing.T) {
 	p := startProgress(progressParams{
 		label: scanPhase("load"), total: -1,
 		waitingFor: countingRecords,
-	}, nil, testRedraw)
+	}, nil, testRedraw, time.Now)
 
 	awaitOutput(t, stderr,
 		"[1/5] load: counting the records, elapsed 0s, eta unknown\n", 3)
 	p.finish()
 }
 
+// TestPlainProgressStalledProducer checks that a phase whose files stop
+// coming, as when one large file is being read or a disk is slow, goes
+// on printing its line every interval: the rate falls to 0 once no file
+// has been read for rateWindow, and once none has for stallTime the
+// line says the phase has stalled, and what it is doing, in place of
+// the rate. The test moves the display's clock by hand.
+//
+//nolint:paralleltest // captureStderr replaces the process-wide os.Stderr
+func TestPlainProgressStalledProducer(t *testing.T) {
+	stderr := captureStderr(t)
+	clock := &testClock{now: time.Now()}
+	p := startProgress(progressParams{
+		label: scanPhase("hash"), unit: scanUnit, total: 100,
+		doing: reading,
+	}, nil, testRedraw, clock.Now)
+
+	// Pass or fail, the display ends before stderr is put back.
+	t.Cleanup(p.finish)
+
+	// 20 files read as the phase starts, then none.
+	for range 20 {
+		p.increment()
+	}
+
+	clock.Add(5 * time.Second)
+	awaitOutput(t, stderr,
+		"[3/5] hash: [20/100] 20%, 4 files/s, elapsed 5s, eta 20s\n", 3)
+
+	clock.Add(time.Second)
+	awaitOutput(t, stderr,
+		"[3/5] hash: [20/100] 20%, 0 files/s, elapsed 6s, eta 24s\n", 3)
+
+	clock.Add(4 * time.Second)
+	awaitOutput(t, stderr,
+		"[3/5] hash: [20/100] 20%, stalled reading, elapsed 10s, eta 40s\n",
+		3)
+}
+
+// TestPlainProgressRateAfterStall draws a phase's plain line by hand, a
+// little over plainInterval after the line before, as a late tick
+// does, through a stall and a burst of files after it: the rate covers
+// the files read since the line before, while the ETA comes from the
+// phase's average.
+//
+//nolint:paralleltest // captureStderr replaces the process-wide os.Stderr
+func TestPlainProgressRateAfterStall(t *testing.T) {
+	stderr := captureStderr(t)
+	clock := &testClock{now: time.Now()}
+
+	// No timed draws: the test draws.
+	p := startProgress(progressParams{
+		label: scanPhase("hash"), unit: scanUnit, total: 1000,
+		doing: reading,
+	}, nil, time.Hour, clock.Now)
+
+	late := plainInterval + time.Millisecond
+
+	clock.Add(late)
+	p.draw()
+	clock.Add(late)
+	p.draw()
+
+	for range 100 {
+		p.increment()
+	}
+
+	clock.Add(late)
+	p.finish()
+
+	want := []string{
+		"[3/5] hash: [0/1000] 0%, 0 files/s, elapsed 0s, eta unknown",
+		"[3/5] hash: [0/1000] 0%, 0 files/s, elapsed 5s, eta unknown",
+		"[3/5] hash: [0/1000] 0%, stalled reading, elapsed 10s, eta unknown",
+		"[3/5] hash: [100/1000] 10%, 20 files/s, elapsed 15s, eta 2m15s",
+	}
+
+	lines := strings.Split(strings.TrimSuffix(stderr(), "\n"), "\n")
+	if !slices.Equal(lines, want) {
+		t.Errorf("stderr lines = %q, want %q", lines, want)
+	}
+}
+
+// TestProgressRateAfterStallRedrawn draws a phase by hand every
+// redrawInterval, as a terminal does, through a stall of stallTime and
+// a burst of files after it: the rate covers the files read over the
+// last rateWindow, and falls to 0 once the burst is older than that,
+// while the ETA comes from the phase's average. Plain lines show each
+// draw.
+//
+//nolint:paralleltest // captureStderr replaces the process-wide os.Stderr
+func TestProgressRateAfterStallRedrawn(t *testing.T) {
+	stderr := captureStderr(t)
+	clock := &testClock{now: time.Now()}
+
+	// No timed draws: the test draws.
+	p := startProgress(progressParams{
+		label: scanPhase("hash"), unit: scanUnit, total: 1000,
+		doing: reading,
+	}, nil, time.Hour, clock.Now)
+
+	// redraw draws the display every redrawInterval for d.
+	redraw := func(d time.Duration) {
+		for range d / redrawInterval {
+			clock.Add(redrawInterval)
+			p.draw()
+		}
+	}
+
+	redraw(stallTime)
+
+	for range 50 {
+		p.increment()
+	}
+
+	redraw(rateWindow + redrawInterval)
+	p.finish()
+
+	want := "[3/5] hash: [50/1000] 5%, 10 files/s, elapsed 15s, eta 4m45s\n" +
+		"[3/5] hash: [50/1000] 5%, 0 files/s, elapsed 15s, eta 4m47s\n"
+	if !strings.Contains(stderr(), want) {
+		t.Errorf("stderr = %q, want the lines %q", stderr(), want)
+	}
+}
+
 // lastFrame returns what a terminal shows of the frames a display drew:
 // the last one. The library starts each frame with a carriage return
 // and erases the previous one with spaces first.
@@ -321,7 +505,7 @@ func TestTerminalRedrawsWhileWaiting(t *testing.T) {
 	for _, tc := range cases {
 		before := len(stderr())
 		since := func() string { return stderr()[before:] }
-		p := startProgress(tc.params, terminalWidth, testRedraw)
+		p := startProgress(tc.params, terminalWidth, testRedraw, time.Now)
 
 		for range 50 {
 			p.increment()
@@ -343,21 +527,23 @@ func TestTerminalRedrawsWhileWaiting(t *testing.T) {
 
 // drawLate draws the display params describes on a terminal width
 // columns wide as it starts and once more as it ends, with count items
-// done two and a half hours into the phase, and returns what it wrote
+// done two and a half hours into the phase, the last just now, and
-// to stderr.
+// returns what it wrote to stderr.
 func drawLate(stderr func() string, params progressParams, width int,
 	count int64,
 ) string {
 	before := len(stderr())
+	clock := &testClock{now: time.Now()}
 
 	// No timed draws come between the two.
-	p := startProgress(params, func() int { return width }, time.Hour)
+	p := startProgress(params, func() int { return width }, time.Hour,
+		clock.Now)
 
 	// Without counting the items one by one or waiting the hours.
+	clock.Add(150 * time.Minute)
+
 	p.mu.Lock()
-	p.count = count
+	p.count, p.lastItem = count, clock.Now()
-	p.start = p.start.Add(-150 * time.Minute)
-	p.rateStart = p.start
 	p.mu.Unlock()
 
 	p.finish()
@@ -413,6 +599,60 @@ func TestTerminalLinesKeepETA(t *testing.T) {
 	}
 }
 
+// TestTerminalStalledLineKeepsWords draws a stalled phase on an
+// 80-column terminal at an ordinary scan's counts and times, 12345 of
+// 45678 files read four and a half minutes in, the last 42 seconds ago,
+// and report's read phase at the same counts: the bar gives way, and
+// what the phase is doing shows whole in place of the rate, beside the
+// phase, progress, elapsed time and ETA.
+//
+//nolint:paralleltest // captureStderr replaces the process-wide os.Stderr
+func TestTerminalStalledLineKeepsWords(t *testing.T) {
+	stderr := captureStderr(t)
+
+	cases := []struct {
+		params progressParams
+		want   string
+	}{{
+		params: progressParams{
+			label: scanPhase("hash"), unit: scanUnit, total: 45678,
+			doing: reading,
+		},
+		want: "[3/5] hash: [12345/45678] 27%, stalled reading, " +
+			"elapsed 4m30s, eta 12m9s",
+	}, {
+		params: progressParams{
+			label: reportPhase("read"), total: 45678, doing: "read/write",
+		},
+		want: "[2/2] read: [12345/45678] 27%, stalled read/write, " +
+			"elapsed 4m30s, eta 12m9s",
+	}}
+
+	for _, tc := range cases {
+		before := len(stderr())
+		clock := &testClock{now: time.Now()}
+
+		// No timed draws: the display is drawn as it starts and as it
+		// ends.
+		p := startProgress(tc.params, func() int { return 80 }, time.Hour,
+			clock.Now)
+
+		clock.Add(4*time.Minute + 30*time.Second - 42*time.Second)
+
+		p.mu.Lock()
+		p.count, p.lastItem = 12345, clock.Now()
+		p.mu.Unlock()
+
+		clock.Add(42 * time.Second)
+		p.finish()
+
+		shown := lastFrame(stderr()[before:])
+		if !strings.Contains(shown, tc.want) {
+			t.Errorf("terminal shows %q, want %q", shown, tc.want)
+		}
+	}
+}
+
 // TestTerminalLinesFitWidth draws a large scan's bar display and a small
 // scan's, two and a half hours into the phase, on terminals from 120
 // columns down to 40, and checks that every line stays clear of the
@@ -479,14 +719,16 @@ func TestTerminalNarrowedRedrawsInPlace(t *testing.T) {
 
 	for _, tc := range cases {
 		width := 120
+		clock := &testClock{now: time.Now()}
 
 		// No timed draws: the test draws.
-		p := startProgress(tc.params, func() int { return width }, time.Hour)
+		p := startProgress(tc.params, func() int { return width }, time.Hour,
+			clock.Now)
+
+		clock.Add(150 * time.Minute)
 
 		p.mu.Lock()
-		p.count = 1234567
+		p.count, p.lastItem = 1234567, clock.Now()
-		p.start = p.start.Add(-150 * time.Minute)
-		p.rateStart = p.start
 		p.mu.Unlock()
 
 		p.draw()
@@ -528,7 +770,7 @@ func TestProgressWarningsOnOwnLines(t *testing.T) {
 	issued := 0
 
 	for _, params := range cases {
-		p := startProgress(params, terminalWidth, testRedraw)
+		p := startProgress(params, terminalWidth, testRedraw, time.Now)
 
 		// No pause between warnings: one written straight to stderr is
 		// garbled only if a redraw lands while it is being written.
@@ -581,7 +823,7 @@ func TestProgressWriterRowsOnOwnLines(t *testing.T) {
 	var want []string
 
 	for _, params := range cases {
-		p := startProgress(params, terminalWidth, testRedraw)
+		p := startProgress(params, terminalWidth, testRedraw, time.Now)
 		out := p.writer(os.Stderr)
 
 		// No pause between rows: one is garbled only if a redraw lands
@@ -644,7 +886,7 @@ func TestProgressWriterStalledStdoutKeepsLines(t *testing.T) {
 	})
 
 	p := startProgress(progressParams{label: treesPhase("write"), total: 1},
-		nil, testRedraw)
+		nil, testRedraw, time.Now)
 	out := p.writer(w)
 	written := make(chan error, 1)
 
@@ -687,7 +929,7 @@ func TestProgressWriterStalledStdoutKeepsLines(t *testing.T) {
 func TestTerminalStoppedShortKeepsCount(t *testing.T) {
 	stderr := captureStderr(t)
 	p := startProgress(progressParams{label: scanPhase("hash"), total: 10},
-		terminalWidth, redrawInterval)
+		terminalWidth, redrawInterval, time.Now)
 
 	p.increment()
 	p.increment()
@@ -706,7 +948,7 @@ func TestTerminalStoppedShortKeepsCount(t *testing.T) {
 func TestWarningAfterLastItemKeepsBar(t *testing.T) {
 	stderr := captureStderr(t)
 	p := startProgress(progressParams{label: scanPhase("hash"), total: 2},
-		terminalWidth, testRedraw)
+		terminalWidth, testRedraw, time.Now)
 
 	p.increment()
 	p.increment()

report.go

@@ -74,9 +74,11 @@ func runReport(ctx context.Context, stdout io.Writer) error {
 
 	defer func() { _ = db.Close() }()
 
+	// The read phase writes the report while it reads the records, so a
+	// stall may be in either.
 	prog = newProgress(progressParams{
 		label: reportPhase("read"), unit: "records", total: -1,
-		waitingFor: countingRecords,
+		waitingFor: countingRecords, doing: "read/write",
 	})
 	report, err := readReport(ctx, db, dbPath, stdout, prog)
 

report_test.go

@@ -156,7 +156,7 @@ func TestReportStdoutFailsWhileReading(t *testing.T) {
 	}
 
 	// Counts the records read, and draws nothing.
-	prog := &progress{}
+	prog := &progress{now: time.Now}
 
 	_, err = readReport(t.Context(), db, "", failingWriter{}, prog)
 	if !errors.Is(err, errWriteFailed) ||
@@ -250,7 +250,7 @@ func TestReadReportOnTerminal(t *testing.T) {
 	p := startProgress(progressParams{
 		label: reportPhase("read"), unit: "records", total: -1,
 		waitingFor: countingRecords,
-	}, terminalWidth, time.Hour)
+	}, terminalWidth, time.Hour, time.Now)
 
 	_, err = readReport(t.Context(), db, "", os.Stderr, p)
 

scan.go

@@ -446,7 +446,7 @@ func (s *scanState) loadIndex(ctx context.Context, roots []string) error {
 	// first gives the display its total.
 	prog := newProgress(progressParams{
 		label: scanPhase("load"), unit: scanUnit, total: -1,
-		waitingFor: countingRecords,
+		waitingFor: countingRecords, doing: reading,
 	})
 	defer prog.finish()
 
@@ -497,7 +497,7 @@ func (s *scanState) walkPhase(
 
 	prog := newProgress(progressParams{
 		label: scanPhase("walk"), unit: scanUnit, total: estimate,
-		estimate: true,
+		estimate: true, doing: "listing",
 	})
 
 	var (
@@ -689,6 +689,7 @@ func (s *scanState) readRuns(ctx context.Context, workers int,
 
 	prog := newProgress(progressParams{
 		label: scanPhase(label), unit: scanUnit, total: int64(len(runs)),
+		doing: reading,
 	})
 	defer prog.finish()
 
@@ -778,6 +779,7 @@ func (s *scanState) updatePhase(ctx context.Context) error {
 	total := len(s.batch) + len(s.sentinels) + len(deletes)
 	prog := newProgress(progressParams{
 		label: scanPhase("update"), unit: scanUnit, total: int64(total),
+		doing: "writing",
 	})
 
 	defer prog.finish()
@@ -866,7 +868,7 @@ func (s *scanState) contentCandidates(
 	// the search returns, and so do their rate and ETA.
 	prog := newProgress(progressParams{
 		label: scanPhase("content"), unit: scanUnit, total: -1,
-		waitingFor: "searching the database",
+		waitingFor: "searching the database", doing: "searching",
 	})
 	defer prog.finish()
 

trees.go

@@ -72,7 +72,7 @@ func runTrees(ctx context.Context, stdout io.Writer) error {
 
 	prog = newProgress(progressParams{
 		label: treesPhase("read"), unit: "records", total: -1,
-		waitingFor: countingRecords,
+		waitingFor: countingRecords, doing: reading,
 	})
 	records, super, allDirs, err := readTree(ctx, db, prog)
 
@@ -84,7 +84,7 @@ func runTrees(ctx context.Context, stdout io.Writer) error {
 
 	prog = newProgress(progressParams{
 		label: treesPhase("group"), unit: "directories",
-		total: int64(len(allDirs)),
+		total: int64(len(allDirs)), doing: "grouping",
 	})
 	dupes := collectTreeGroups(allDirs, super, prog)
 
@@ -92,6 +92,7 @@ func runTrees(ctx context.Context, stdout io.Writer) error {
 
 	prog = newProgress(progressParams{
 		label: treesPhase("write"), unit: "groups", total: int64(len(dupes)),
+		doing: "writing",
 	})
 	dupeTrees, reclaimable, err := writeTreeGroups(stdout, dupes, prog)
 

trees_test.go

@@ -279,7 +279,7 @@ func TestWriteTreeGroupsOnTerminal(t *testing.T) {
 	// No timed draws: the display is drawn as it starts and as it ends.
 	p := startProgress(progressParams{
 		label: treesPhase("write"), unit: "groups", total: int64(len(dupes)),
-	}, terminalWidth, time.Hour)
+	}, terminalWidth, time.Hour, time.Now)
 
 	_, _, err := writeTreeGroups(os.Stderr, dupes, p)