Add the ProtonVPN server networks and addresses to the IP lookup (closes #236)

Adds the VPN lists `protonvpn`, the servers' /24 networks, IPv4 only, and `protonvpn_entry`, the servers' IPv4 and IPv6 addresses. Each is downloaded once a day and shows in `flags.is_vpn` and `vpn_providers` with no other change.

Proton's `/vpn/logicals` answers 401 without a logged-in session, even with a current client's `x-pm-appversion`, so both come from the public ProtonVPN-IPs mirror. No request header is needed.

Judgement call: the mirror's /24 file as well as its exact addresses. Its README says traffic leaves from unpublished addresses in those networks. The cost is that neighbouring addresses are listed too.

Model: opus-5-5

README.md

@@ -434,6 +434,14 @@ The lists:
 - `pia`: VPN servers run by Private Internet Access. From
   [Private Internet Access](https://serverlist.piaservers.net/vpninfo/servers/v6),
   downloaded once a day.
+- `protonvpn`: the /24 networks that hold ProtonVPN servers. The whole /24 is
+  listed because the ProtonVPN-IPs README says traffic leaves from unpublished
+  addresses in it. From the public
+  [ProtonVPN-IPs](https://github.com/tn3w/ProtonVPN-IPs) mirror of Proton's
+  server list, downloaded once a day.
+- `protonvpn_entry`: the IPv4 and IPv6 addresses of ProtonVPN servers. From the
+  same [ProtonVPN-IPs](https://github.com/tn3w/ProtonVPN-IPs) mirror, downloaded
+  once a day.
 - `spamhaus_drop` and `spamhaus_dropv6`: IPv4 and IPv6 networks hijacked or
   leased by spammers or cyber criminals, according to Spamhaus. From
   [Spamhaus DROP](https://www.spamhaus.org/blocklists/do-not-route-or-peer/),

TODO.md

@@ -53,6 +53,9 @@ problem the run finds.
 
 # Completed Steps
 
+- 2026-11-10: the IP lookup checks the `protonvpn` list of ProtonVPN's /24
+  networks, from a public mirror of Proton's server list (closes
+  https://git.eeqj.de/sneak/routewatch/issues/236).
 - 2026-11-10: the tests no longer fail when a busy host stalls for several
   seconds. Most such waits are now 15 seconds. The test of the stream's idle
   timeout runs on a fake clock (closes #240)

internal/iplist/iplist.go

@@ -51,6 +51,11 @@ const (
 	// FormatIVPNJSON is IVPN's JSON server list. The hosts of its wireguard
 	// and openvpn gateways have their addresses in host and v2ray.
 	FormatIVPNJSON
+
+	// FormatProtonVPN has one address or network per line, with comment lines
+	// that start with #. Unlike FormatLines, a file with no addresses or
+	// networks fails.
+	FormatProtonVPN
 )
 
 // List is one public IP list.

internal/iplist/iplist_internal_test.go

@@ -70,6 +70,19 @@ const (
 	"config":{"api":{"ips":["192.0.2.73"]}}}`
 )
 
+// protonVPNBody is a small file in the format of the ProtonVPN-IPs list.
+const protonVPNBody = "#\n# protonvpn_ip_ranges.txt\n" +
+	"# https://github.com/tn3w/ProtonVPN-IPs\n#\n" +
+	"# The /24 block of every advertised IPv4.\n#\n" +
+	"192.0.2.0/24\n198.51.100.0/24\n"
+
+// protonVPNEntryBody is a small file in the format of the ProtonVPN-IPs list
+// of server addresses.
+const protonVPNEntryBody = "#\n# protonvpn_entry_ips.txt\n" +
+	"# https://github.com/tn3w/ProtonVPN-IPs\n#\n" +
+	"# Entry IPs clients connect to, resolved from ProtonVPN hostnames.\n#\n" +
+	"192.0.2.80\n2001:db8::80\n"
+
 // errorPage is a file that is no list, as a publisher's error page is.
 const errorPage = "<!DOCTYPE html>\n<html></html>\n"
 
@@ -267,6 +280,20 @@ func TestLookupFindsVPNServers(t *testing.T) {
 			listed:   []string{"192.0.2.70", "192.0.2.71", "192.0.2.72"},
 			unlisted: []string{"192.0.2.73", "2001:db8::70"},
 		},
+		{
+			name:     "ProtonVPN networks",
+			format:   FormatProtonVPN,
+			body:     protonVPNBody,
+			listed:   []string{"192.0.2.0", "192.0.2.255", "198.51.100.7"},
+			unlisted: []string{"192.0.3.1", "2001:db8::90"},
+		},
+		{
+			name:     "ProtonVPN server addresses",
+			format:   FormatProtonVPN,
+			body:     protonVPNEntryBody,
+			listed:   []string{"192.0.2.80", "2001:db8::80"},
+			unlisted: []string{"192.0.2.81", "2001:db8::81"},
+		},
 	})
 }
 
@@ -479,6 +506,31 @@ func TestWrongVPNDocumentFailsToParse(t *testing.T) {
 	}
 }
 
+// TestWrongProtonVPNDocumentFailsToParse parses documents that are not a
+// ProtonVPN-IPs list. Each fails, so none can replace a good copy.
+func TestWrongProtonVPNDocumentFailsToParse(t *testing.T) {
+	t.Parallel()
+
+	bodies := map[string]string{
+		"error page":    errorPage,
+		"JSON":          `{"status":"ok"}`,
+		"comments only": "#\n# protonvpn_ip_ranges.txt\n#\n",
+		"bad network":   "192.0.2.0/24\nexample\n",
+		"an empty file": "",
+	}
+
+	for name, body := range bodies {
+		t.Run(name, func(t *testing.T) {
+			t.Parallel()
+
+			addresses, err := parse(strings.NewReader(body), FormatProtonVPN)
+			if err == nil {
+				t.Errorf("parse returned %v and no error", addresses.Ranges())
+			}
+		})
+	}
+}
+
 // TestLookupMarksVPNLists looks up an address on a VPN list and on another
 // list. Only the VPN list's listing says it is one.
 func TestLookupMarksVPNLists(t *testing.T) {
@@ -523,7 +575,10 @@ func TestPublicListsMarkTheVPNLists(t *testing.T) {
 		}
 	}
 
-	want := []string{"ivpn", "mullvad", "nordvpn", "pia", "x4bnet", "x4bnet_v6"}
+	want := []string{
+		"ivpn", "mullvad", "nordvpn", "pia", "protonvpn", "protonvpn_entry",
+		"x4bnet", "x4bnet_v6",
+	}
 	if !slices.Equal(got, want) {
 		t.Errorf("VPN lists %v, want %v", got, want)
 	}

internal/iplist/lists.go

@@ -146,6 +146,30 @@ func vpnLists() []List {
 			Format:      FormatPIAJSON,
 			VPN:         true,
 		},
+		{
+			// Proton's own server list needs a logged-in session, so this is
+			// the public ProtonVPN-IPs mirror of it. Proton publishes only
+			// the addresses clients connect to. The mirror's README says
+			// traffic leaves from others in the same /24, so this file of
+			// /24 networks is the one it says to use for detecting exits.
+			Name: "protonvpn",
+			Description: "In a /24 network that holds a server of the " +
+				"ProtonVPN service",
+			URL: "https://raw.githubusercontent.com/tn3w/ProtonVPN-IPs/master/" +
+				"protonvpn_ip_ranges.txt",
+			Interval: vpnListInterval,
+			Format:   FormatProtonVPN,
+			VPN:      true,
+		},
+		{
+			Name:        "protonvpn_entry",
+			Description: "A server of the ProtonVPN service",
+			URL: "https://raw.githubusercontent.com/tn3w/ProtonVPN-IPs/master/" +
+				"protonvpn_entry_ips.txt",
+			Interval: vpnListInterval,
+			Format:   FormatProtonVPN,
+			VPN:      true,
+		},
 		{
 			Name: "x4bnet",
 			Description: "In an IPv4 network of a VPN service, according to " +

internal/iplist/parse.go

@@ -58,6 +58,8 @@ func parse(r io.Reader, format Format) (*netipx.IPSet, error) {
 		return parsePIA(r)
 	case FormatIVPNJSON:
 		return parseIVPN(r)
+	case FormatProtonVPN:
+		return parseProtonVPN(r)
 	default:
 		return nil, errUnknownFormat
 	}
@@ -329,6 +331,22 @@ func parseIVPN(r io.Reader) (*netipx.IPSet, error) {
 	return addressSet(texts)
 }
 
+// parseProtonVPN returns the addresses or networks in a ProtonVPN-IPs list. A
+// file with no addresses or networks fails, because the service always has
+// servers.
+func parseProtonVPN(r io.Reader) (*netipx.IPSet, error) {
+	addresses, err := parseLines(r, addAddressOrNetwork)
+	if err != nil {
+		return nil, err
+	}
+
+	if len(addresses.Ranges()) == 0 {
+		return nil, errNoAddresses
+	}
+
+	return addresses, nil
+}
+
 // readJSON reads r to its end and decodes it, as one JSON document, into v.
 func readJSON(r io.Reader, v any) error {
 	data, err := io.ReadAll(r)