Write each handler batch from its flush goroutine, outside the mutex (closes #65)

The AS, peer and prefix handlers wrote their batch to the database while
holding the mutex HandleMessage needs, and HandleMessage wrote a full batch
itself. For as long as a write took, the handler took nothing off its queue,
and the streamer dropped updates once the queue was half full.

Now only the flush goroutine writes: it takes the batch under the mutex,
releases it, then writes. A full batch wakes the flush goroutine instead.
Stop still writes what the handler holds.

While a write runs, the next batch has no size limit; the README memory
section says so.

Model: opus-5-5

README.md

@@ -141,11 +141,15 @@ routewatch/
 - **Batched Writes**: All database operations are batched for performance
 - **Backpressure**: Probabilistic message dropping when queues exceed 50% capacity
 - **Graceful Shutdown**: 60-second timeout, flushes all pending batches
-- **Reconnection**: Exponential backoff (5s-320s) with reset after 30s of stable connection
+- **Reconnection**: Any end of the stream other than shutdown, including RIS Live
+  ending the response normally, marks the feed disconnected and reconnects with
+  exponential backoff (5s-320s). The backoff resets after a stream that lasted
+  more than 30s. A stream with no line for 60s is dropped and reconnected.
 - **IP Lookup**: the most specific live route is found by looking up the
   address's prefix at each mask length, longest first, in the prefix index
-  (at most 33 lookups for IPv4, 129 for IPv6); prefixes are stored in the
+  (at most 25 lookups for IPv4, 113 for IPv6); prefixes are stored in the
-  text form Go's `net/netip` prints
+  text form Go's `net/netip` prints. Routes shorter than /8 for IPv4 or /16
+  for IPv6, such as a default route, are not used.
 
 ### Database Schema
 
@@ -229,6 +233,10 @@ What happens at each limit:
   keeps running.
 - Handler queues: each of the four handler queues holds at most 20,000 messages.
   When a queue fills, the streamer drops messages instead of blocking.
+- Handler batches: while the AS, peer or prefix handler writes a batch to the
+  database, the updates that arrive collect in its next batch, which has no size
+  limit. A database that stays slower than the feed grows memory instead of
+  dropping updates.
 
 With `DEBUG=routewatch` the daemon logs a `System stats` line every 60 seconds
 with the goroutine count and Go memory figures.

internal/database/database.go

@@ -37,6 +37,14 @@ const (
 	ipv6Bits       = 128
 )
 
+// The IP lookup does not use routes shorter than these mask lengths. A default
+// route or a route this short only says where a peer sends traffic it has no
+// better route for; it does not say who holds the address.
+const (
+	minLookupMaskLengthV4 = 8
+	minLookupMaskLengthV6 = 16
+)
+
 // SQLite memory tuning. cache_size and busy_timeout go in the DSN so every
 // pooled connection gets them; the heap limits are process-wide and set once.
 const (
@@ -1624,16 +1632,17 @@ func (d *Database) GetASPeersContext(ctx context.Context, asn int) ([]ASPeer, er
 }
 
 // GetPrefixDetails returns detailed information about a prefix
-func (d *Database) GetPrefixDetails(prefix string) ([]LiveRoute, error) {
+func (d *Database) GetPrefixDetails(prefix string) ([]LiveRoute, map[int]ASN, error) {
 	return d.GetPrefixDetailsContext(context.Background(), prefix)
 }
 
-// GetPrefixDetailsContext returns detailed information about a prefix with context support
+// GetPrefixDetailsContext returns the live routes for a prefix and, keyed by
-func (d *Database) GetPrefixDetailsContext(ctx context.Context, prefix string) ([]LiveRoute, error) {
+// AS number, the handle and description of each AS that originates it.
+func (d *Database) GetPrefixDetailsContext(ctx context.Context, prefix string) ([]LiveRoute, map[int]ASN, error) {
 	// Determine if it's IPv4 or IPv6 by parsing the prefix
 	_, ipnet, err := net.ParseCIDR(prefix)
 	if err != nil {
-		return nil, fmt.Errorf("invalid prefix format: %w", err)
+		return nil, nil, fmt.Errorf("invalid prefix format: %w", err)
 	}
 
 	tableName := "live_routes_v4"
@@ -1655,11 +1664,12 @@ func (d *Database) GetPrefixDetailsContext(ctx context.Context, prefix string) (
 
 	rows, err := d.db.QueryContext(ctx, query, prefix)
 	if err != nil {
-		return nil, fmt.Errorf("failed to query prefix details: %w", err)
+		return nil, nil, fmt.Errorf("failed to query prefix details: %w", err)
 	}
 	defer func() { _ = rows.Close() }()
 
 	var routes []LiveRoute
+	origins := make(map[int]ASN)
 	for rows.Next() {
 		var route LiveRoute
 		var pathJSON string
@@ -1682,13 +1692,18 @@ func (d *Database) GetPrefixDetailsContext(ctx context.Context, prefix string) (
 		route.IPVersion = ipVersion
 		route.MaskLength, _ = ipnet.Mask.Size()
 		routes = append(routes, route)
+		origins[route.OriginASN] = ASN{
+			ASN:         route.OriginASN,
+			Handle:      handle.String,
+			Description: description.String,
+		}
 	}
 
 	if len(routes) == 0 {
-		return nil, fmt.Errorf("%w: %s", ErrNoRoute, prefix)
+		return nil, nil, fmt.Errorf("%w: %s", ErrNoRoute, prefix)
 	}
 
-	return routes, nil
+	return routes, origins, nil
 }
 
 // GetRandomPrefixesByLength returns a random sample of prefixes with the specified mask length
@@ -1876,11 +1891,12 @@ func (d *Database) GetIPInfo(ip string) (*IPInfo, error) {
 // GetIPInfoContext returns comprehensive IP information with context support.
 //
 // It finds the most specific live route for the address with point lookups on
-// the prefix index: for each mask length from the longest (32 or 128) down to 0
+// the prefix index: for each mask length from the longest (32 or 128) down to
-// it looks up the address's network prefix at that length, and the first length
+// minLookupMaskLengthV4 or minLookupMaskLengthV6 it looks up the address's
-// with a live route wins. That is at most 33 or 129 indexed lookups, however
+// network prefix at that length, and the first length with a live route wins.
-// many routes are live. The prefix is looked up in the text form net/netip
+// That is at most 25 or 113 indexed lookups, however many routes are live. The
-// prints, which is the form the prefix handler stores.
+// prefix is looked up in the text form net/netip prints, which is the form the
+// prefix handler stores.
 func (d *Database) GetIPInfoContext(ctx context.Context, ip string) (*IPInfo, error) {
 	addr, err := netip.ParseAddr(ip)
 	if err != nil {
@@ -1891,9 +1907,11 @@ func (d *Database) GetIPInfoContext(ctx context.Context, ip string) (*IPInfo, er
 
 	info := &IPInfo{IP: ip, IPVersion: ipVersionV6}
 	routesTable, prefixesTable := "live_routes_v6", "prefixes_v6"
+	minMaskLength := minLookupMaskLengthV6
 	if addr.Is4() {
 		info.IPVersion = ipVersionV4
 		routesTable, prefixesTable = "live_routes_v4", "prefixes_v4"
+		minMaskLength = minLookupMaskLengthV4
 	}
 
 	// Route info with peer count and prefix first_seen
@@ -1934,7 +1952,7 @@ func (d *Database) GetIPInfoContext(ctx context.Context, ip string) (*IPInfo, er
 	var whoisUpdatedAt sql.NullTime
 
 	found := false
-	for bits := addr.BitLen(); bits >= 0; bits-- {
+	for bits := addr.BitLen(); bits >= minMaskLength; bits-- {
 		prefix := netip.PrefixFrom(addr, bits).Masked().String()
 		err := stmt.QueryRowContext(ctx, prefix).Scan(
 			&info.Netblock,

internal/database/database_test.go

@@ -133,6 +133,78 @@ func TestGetIPInfoFindsMostSpecificLiveRoute(t *testing.T) {
 	lookup("2001:db8:1:2::3", "2001:db8:1::/48")
 }
 
+// TestGetIPInfoIgnoresShortRoutes checks that the IP lookup does not report a
+// default route, or a route shorter than /8 for IPv4 or /16 for IPv6, as the
+// route for an address, and that a route of exactly /8 or /16, or longer, still
+// is. The prefixes are written out so that a wrong limit fails the test.
+func TestGetIPInfoIgnoresShortRoutes(t *testing.T) {
+	cfg := &config.Config{StateDir: t.TempDir()}
+
+	db, err := New(cfg, logger.New())
+	if err != nil {
+		t.Fatalf("failed to create database: %v", err)
+	}
+	defer func() { _ = db.Close() }()
+
+	ts := time.Date(2026, 1, 2, 3, 4, 5, 0, time.UTC)
+	announce := func(prefix string, asn int) {
+		t.Helper()
+
+		err := db.UpsertLiveRouteBatch([]*LiveRoute{{
+			ID:          uuid.New(),
+			Prefix:      prefix,
+			MaskLength:  netip.MustParsePrefix(prefix).Bits(),
+			IPVersion:   detectIPVersion(prefix),
+			OriginASN:   asn,
+			PeerIP:      testPeerIP,
+			ASPath:      []int{asn},
+			NextHop:     testPeerIP,
+			LastUpdated: ts,
+		}})
+		if err != nil {
+			t.Fatalf("UpsertLiveRouteBatch(%s): %v", prefix, err)
+		}
+	}
+
+	// lookup checks that ip resolves to the live prefix netblock from asn.
+	lookup := func(ip, netblock string, asn int) {
+		t.Helper()
+
+		info, err := db.GetIPInfo(ip)
+		if err != nil {
+			t.Errorf("GetIPInfo(%s): %v", ip, err)
+
+			return
+		}
+		if info.Netblock != netblock || info.ASN != asn {
+			t.Errorf("GetIPInfo(%s) = %s AS%d, want %s AS%d", ip, info.Netblock, info.ASN, netblock, asn)
+		}
+	}
+
+	// Default and very short routes, and routes one bit shorter than each limit.
+	announce("2000::/3", 64500)
+	announce("0.0.0.0/0", 64500)
+	announce("2000::/15", 64500)
+	announce("192.0.0.0/7", 64500)
+
+	for _, ip := range []string{"2001:db8::1", "192.0.2.1"} {
+		if info, err := db.GetIPInfo(ip); !errors.Is(err, ErrNoRoute) {
+			t.Errorf("GetIPInfo(%s) with only short routes = %+v, %v; want ErrNoRoute", ip, info, err)
+		}
+	}
+
+	// Routes of exactly the minimum length are used.
+	announce("2001::/16", 64501)
+	announce("192.0.0.0/8", 64501)
+
+	lookup("2001:db8::1", "2001::/16", 64501)
+	lookup("192.0.2.1", "192.0.0.0/8", 64501)
+
+	announce("2001:db8::/32", 64502)
+
+	lookup("2001:db8::1", "2001:db8::/32", 64502)
+}
+
 // TestConnectionPoolPragmas holds several pooled connections open at once and
 // checks each one carries the per-connection settings from the DSN, plus the
 // process-wide hard heap limit, and sees the new file with auto_vacuum

internal/database/interface.go

@@ -76,8 +76,8 @@ type Store interface {
 	GetASDetailsContext(ctx context.Context, asn int) (*ASN, []LiveRoute, error)
 	GetASPeers(asn int) ([]ASPeer, error)
 	GetASPeersContext(ctx context.Context, asn int) ([]ASPeer, error)
-	GetPrefixDetails(prefix string) ([]LiveRoute, error)
+	GetPrefixDetails(prefix string) ([]LiveRoute, map[int]ASN, error)
-	GetPrefixDetailsContext(ctx context.Context, prefix string) ([]LiveRoute, error)
+	GetPrefixDetailsContext(ctx context.Context, prefix string) ([]LiveRoute, map[int]ASN, error)
 	GetRandomPrefixesByLength(maskLength, ipVersion, limit int) ([]LiveRoute, error)
 	GetRandomPrefixesByLengthContext(ctx context.Context, maskLength, ipVersion, limit int) ([]LiveRoute, error)
 

internal/metrics/metrics.go

@@ -60,18 +60,23 @@ func New() *Tracker {
 	}
 }
 
-// SetConnected updates the connection status
+// SetConnected updates the connection status. Every connection after the
+// first counts one reconnect.
 func (t *Tracker) SetConnected(connected bool) {
-	wasConnected := t.isConnected.Swap(connected)
+	t.isConnected.Store(connected)
-	if connected {
+	if !connected {
+		return
+	}
+
 	t.mu.Lock()
+	// connectedSince is zero until the first connection.
+	connectedBefore := !t.connectedSince.IsZero()
 	t.connectedSince = time.Now()
 	t.mu.Unlock()
-		// Increment reconnect count (but not for the initial connection)
+
-		if wasConnected || t.reconnectCount.Load() > 0 {
+	if connectedBefore {
 		t.reconnectCount.Add(1)
 	}
-	}
 }
 
 // GetReconnectCount returns the number of reconnections since startup

internal/metrics/metrics_test.go

@@ -0,0 +1,21 @@
+package metrics
+
+import "testing"
+
+// TestReconnectCount connects three times with a disconnect between each, the
+// way the streamer does, and expects every connection after the first to count
+// one reconnect.
+func TestReconnectCount(t *testing.T) {
+	tracker := New()
+
+	tracker.SetConnected(true)
+	tracker.SetConnected(false)
+	tracker.SetConnected(true)
+	tracker.SetConnected(false)
+	tracker.SetConnected(true)
+
+	const wantReconnects = 2
+	if got := tracker.GetReconnectCount(); got != wantReconnects {
+		t.Fatalf("reconnect count = %d, want %d", got, wantReconnects)
+	}
+}

internal/routewatch/app_integration_test.go

@@ -252,13 +252,15 @@ func (m *mockStore) GetASDetailsContext(ctx context.Context, asn int) (*database
 }
 
 // GetPrefixDetails mock implementation
-func (m *mockStore) GetPrefixDetails(prefix string) ([]database.LiveRoute, error) {
+func (m *mockStore) GetPrefixDetails(prefix string) ([]database.LiveRoute, map[int]database.ASN, error) {
 	// Return empty routes for now
-	return []database.LiveRoute{}, nil
+	return []database.LiveRoute{}, map[int]database.ASN{}, nil
 }
 
 // GetPrefixDetailsContext mock implementation with context support
-func (m *mockStore) GetPrefixDetailsContext(ctx context.Context, prefix string) ([]database.LiveRoute, error) {
+func (m *mockStore) GetPrefixDetailsContext(
+	ctx context.Context, prefix string,
+) ([]database.LiveRoute, map[int]database.ASN, error) {
 	return m.GetPrefixDetails(prefix)
 }
 

internal/routewatch/ashandler.go

@@ -32,10 +32,13 @@ type ASHandler struct {
 	db     database.Store
 	logger *logger.Logger
 
-	// Batching
+	// Batching. mu guards batch only: the flush goroutine takes the batch
+	// under mu and writes it after releasing mu, so HandleMessage never
+	// waits for a database write.
 	mu          sync.Mutex
 	batch       []asnOp
-	lastFlush time.Time
+	batchFullCh chan struct{} // wakes the flush goroutine when batch is full
+	lastFlush   time.Time     // used only by the flush goroutine
 	stopCh      chan struct{}
 	wg          sync.WaitGroup
 }
@@ -55,6 +58,7 @@ func NewASHandler(db database.Store, logger *logger.Logger) *ASHandler {
 		db:          db,
 		logger:      logger,
 		batch:       make([]asnOp, 0, asnBatchSize),
+		batchFullCh: make(chan struct{}, 1),
 		lastFlush:   time.Now(),
 		stopCh:      make(chan struct{}),
 	}
@@ -85,8 +89,8 @@ func (h *ASHandler) QueueCapacity() int {
 // HandleMessage processes a RIS Live BGP message by extracting all ASNs from
 // the AS path and queuing them for batch insertion into the database. The
 // origin ASN (last element in the path) and all transit ASNs are recorded
-// with their associated timestamps. The batch is automatically flushed when
+// with their associated timestamps. When the batch reaches the configured size
-// it reaches the configured size threshold.
+// threshold, the flush goroutine is woken to write it.
 func (h *ASHandler) HandleMessage(msg *ristypes.RISMessage) {
 	// Use the pre-parsed timestamp
 	timestamp := msg.ParsedTimestamp
@@ -118,13 +122,18 @@ func (h *ASHandler) HandleMessage(msg *ristypes.RISMessage) {
 		}
 	}
 
-	// Check if we need to flush
+	// A full batch wakes the flush goroutine. If it is writing, the wake-up
+	// waits in batchFullCh and the batch keeps growing until the write ends.
 	if len(h.batch) >= asnBatchSize {
-		h.flushBatchLocked()
+		select {
+		case h.batchFullCh <- struct{}{}:
+		default: // already woken
+		}
 	}
 }
 
-// flushLoop runs in a goroutine and periodically flushes batches
+// flushLoop runs in a goroutine, the only one that writes the batch: it
+// flushes when the batch is full, periodically, and once more on Stop.
 func (h *ASHandler) flushLoop() {
 	defer h.wg.Done()
 	ticker := time.NewTicker(asnBatchTimeout)
@@ -133,31 +142,46 @@ func (h *ASHandler) flushLoop() {
 	for {
 		select {
 		case <-ticker.C:
-			h.mu.Lock()
 			if time.Since(h.lastFlush) >= asnBatchTimeout {
-				h.flushBatchLocked()
+				h.flushBatch()
 			}
-			h.mu.Unlock()
+		case <-h.batchFullCh:
+			h.flushBatch()
 		case <-h.stopCh:
 			// Final flush
-			h.mu.Lock()
+			h.flushBatch()
-			h.flushBatchLocked()
-			h.mu.Unlock()
 
 			return
 		}
 	}
 }
 
-// flushBatchLocked flushes the ASN batch to the database (must be called with mutex held)
+// takeBatch returns the pending operations and leaves an empty batch in their
-func (h *ASHandler) flushBatchLocked() {
+// place for HandleMessage to fill.
+func (h *ASHandler) takeBatch() []asnOp {
+	h.mu.Lock()
+	defer h.mu.Unlock()
+
 	if len(h.batch) == 0 {
+		return nil
+	}
+	batch := h.batch
+	h.batch = make([]asnOp, 0, asnBatchSize)
+
+	return batch
+}
+
+// flushBatch takes the pending batch and writes it to the database, without
+// holding the mutex during the write.
+func (h *ASHandler) flushBatch() {
+	batch := h.takeBatch()
+	if len(batch) == 0 {
 		return
 	}
 
 	// Process ASNs first (deduped)
 	asnMap := make(map[int]time.Time)
-	for _, op := range h.batch {
+	for _, op := range batch {
 		if existing, ok := asnMap[op.number]; !ok || op.timestamp.After(existing) {
 			asnMap[op.number] = op.timestamp
 		}
@@ -168,8 +192,6 @@ func (h *ASHandler) flushBatchLocked() {
 		h.logger.Error("Failed to process ASN batch", "error", err, "count", len(asnMap))
 	}
 
-	// Clear batch
-	h.batch = h.batch[:0]
 	h.lastFlush = time.Now()
 }
 

internal/routewatch/batchwrite_test.go

@@ -0,0 +1,192 @@
+package routewatch
+
+import (
+	"slices"
+	"sync"
+	"testing"
+	"time"
+
+	"git.eeqj.de/sneak/routewatch/internal/database"
+	"git.eeqj.de/sneak/routewatch/internal/logger"
+	"git.eeqj.de/sneak/routewatch/internal/ristypes"
+)
+
+// handleMessageTimeout is how long a test waits for HandleMessage to return,
+// or for a write to start, before it fails.
+const handleMessageTimeout = 2 * time.Second
+
+// blockingStore is a mockStore whose batch writes for the AS, peer and prefix
+// handlers wait until the test closes release. writeStarted is closed when the
+// first of them starts. It records what each write was given.
+type blockingStore struct {
+	*mockStore
+
+	release      chan struct{}
+	writeStarted chan struct{}
+	startOnce    sync.Once
+
+	mu       sync.Mutex
+	prefixes map[string]bool
+	asns     map[int]bool
+	peers    map[string]bool
+}
+
+func newBlockingStore() *blockingStore {
+	return &blockingStore{
+		mockStore:    newMockStore(),
+		release:      make(chan struct{}),
+		writeStarted: make(chan struct{}),
+		prefixes:     make(map[string]bool),
+		asns:         make(map[int]bool),
+		peers:        make(map[string]bool),
+	}
+}
+
+func (s *blockingStore) waitForRelease() {
+	s.startOnce.Do(func() { close(s.writeStarted) })
+	<-s.release
+}
+
+func (s *blockingStore) UpsertLiveRouteBatch(routes []*database.LiveRoute) error {
+	s.waitForRelease()
+	s.mu.Lock()
+	defer s.mu.Unlock()
+	for _, route := range routes {
+		s.prefixes[route.Prefix] = true
+	}
+
+	return nil
+}
+
+func (s *blockingStore) GetOrCreateASNBatch(asns map[int]time.Time) error {
+	s.waitForRelease()
+	s.mu.Lock()
+	defer s.mu.Unlock()
+	for asn := range asns {
+		s.asns[asn] = true
+	}
+
+	return nil
+}
+
+func (s *blockingStore) UpdatePeerBatch(peers map[string]database.PeerUpdate) error {
+	s.waitForRelease()
+	s.mu.Lock()
+	defer s.mu.Unlock()
+	for peerIP := range peers {
+		s.peers[peerIP] = true
+	}
+
+	return nil
+}
+
+// returnsInTime reports whether f returns within handleMessageTimeout.
+func returnsInTime(f func()) bool {
+	done := make(chan struct{})
+	go func() {
+		f()
+		close(done)
+	}()
+
+	select {
+	case <-done:
+		return true
+	case <-time.After(handleMessageTimeout):
+		return false
+	}
+}
+
+// handleWhileAWriteIsBlocked hands h the messages in fill, which fill its
+// batch so that the handler writes it to store, waits until the write starts,
+// and hands h the message extra while store holds the write. HandleMessage
+// must return each time. Then it lets the writes finish and stops h, which
+// writes what it holds.
+func handleWhileAWriteIsBlocked(
+	t *testing.T,
+	store *blockingStore,
+	h interface {
+		HandleMessage(*ristypes.RISMessage)
+		Stop()
+	},
+	fill []*ristypes.RISMessage,
+	extra *ristypes.RISMessage,
+) {
+	t.Helper()
+	defer h.Stop()
+	defer close(store.release)
+
+	if !returnsInTime(func() {
+		for _, msg := range fill {
+			h.HandleMessage(msg)
+		}
+	}) {
+		t.Fatal("HandleMessage did not return after filling the batch: it waits for the database write")
+	}
+
+	select {
+	case <-store.writeStarted:
+	case <-time.After(handleMessageTimeout):
+		t.Fatal("the handler did not write its full batch")
+	}
+
+	if !returnsInTime(func() { h.HandleMessage(extra) }) {
+		t.Fatal("HandleMessage did not return while a database write was blocked")
+	}
+}
+
+func TestPrefixHandlerHandlesMessagesWhileAWriteIsBlocked(t *testing.T) {
+	const (
+		fillPrefix  = "192.0.2.0/24"
+		extraPrefix = "198.51.100.0/24"
+	)
+
+	announce := func(prefixes []string) *ristypes.RISMessage {
+		return &ristypes.RISMessage{
+			Peer:          testPeerIP,
+			Path:          ristypes.ASPath{testASNA},
+			Announcements: []ristypes.RISAnnouncement{{NextHop: testPeerIP, Prefixes: prefixes}},
+		}
+	}
+
+	store := newBlockingStore()
+	h := NewPrefixHandler(store, logger.New())
+	handleWhileAWriteIsBlocked(t, store, h,
+		[]*ristypes.RISMessage{announce(slices.Repeat([]string{fillPrefix}, prefixBatchSize))},
+		announce([]string{extraPrefix}))
+
+	store.mu.Lock()
+	defer store.mu.Unlock()
+	if !store.prefixes[extraPrefix] {
+		t.Errorf("Stop did not write %s, handled while a write was blocked", extraPrefix)
+	}
+}
+
+func TestASHandlerHandlesMessagesWhileAWriteIsBlocked(t *testing.T) {
+	store := newBlockingStore()
+	h := NewASHandler(store, logger.New())
+	handleWhileAWriteIsBlocked(t, store, h,
+		[]*ristypes.RISMessage{{Path: slices.Repeat(ristypes.ASPath{testASNA}, asnBatchSize)}},
+		&ristypes.RISMessage{Path: ristypes.ASPath{testASNB}})
+
+	store.mu.Lock()
+	defer store.mu.Unlock()
+	if !store.asns[testASNB] {
+		t.Errorf("Stop did not write AS%d, handled while a write was blocked", testASNB)
+	}
+}
+
+func TestPeerHandlerHandlesMessagesWhileAWriteIsBlocked(t *testing.T) {
+	const otherPeerIP = "2001:db8:ffff::2"
+
+	store := newBlockingStore()
+	h := NewPeerHandler(store, logger.New())
+	handleWhileAWriteIsBlocked(t, store, h,
+		slices.Repeat([]*ristypes.RISMessage{{Peer: testPeerIP}}, peerBatchSize),
+		&ristypes.RISMessage{Peer: otherPeerIP})
+
+	store.mu.Lock()
+	defer store.mu.Unlock()
+	if !store.peers[otherPeerIP] {
+		t.Errorf("Stop did not write peer %s, handled while a write was blocked", otherPeerIP)
+	}
+}

internal/routewatch/cli.go

@@ -20,6 +20,8 @@ const (
 	debugInterval = 60 * time.Second
 	// bytesPerMB is bytes per megabyte
 	bytesPerMB = 1024 * 1024
+	// failureExitCode is the exit status when RouteWatch stops on an error
+	failureExitCode = 1
 )
 
 // logDebugStats logs goroutine count and memory usage
@@ -83,6 +85,9 @@ func CLIEntry() {
 					go func() {
 						if err := rw.Run(ctx); err != nil {
 							logger.Error("RouteWatch error", "error", err)
+							if err := shutdowner.Shutdown(fx.ExitCode(failureExitCode)); err != nil {
+								logger.Error("Failed to shutdown gracefully", "error", err)
+							}
 						}
 					}()
 

internal/routewatch/peerhandler.go

@@ -35,10 +35,13 @@ type PeerHandler struct {
 	db     database.Store
 	logger *logger.Logger
 
-	// Batching
+	// Batching. mu guards peerBatch only: the flush goroutine takes the batch
+	// under mu and writes it after releasing mu, so HandleMessage never
+	// waits for a database write.
 	mu          sync.Mutex
 	peerBatch   []peerUpdate
-	lastFlush time.Time
+	batchFullCh chan struct{} // wakes the flush goroutine when peerBatch is full
+	lastFlush   time.Time     // used only by the flush goroutine
 	stopCh      chan struct{}
 	wg          sync.WaitGroup
 }
@@ -59,6 +62,7 @@ func NewPeerHandler(db database.Store, logger *logger.Logger) *PeerHandler {
 		db:          db,
 		logger:      logger,
 		peerBatch:   make([]peerUpdate, 0, peerBatchSize),
+		batchFullCh: make(chan struct{}, 1),
 		lastFlush:   time.Now(),
 		stopCh:      make(chan struct{}),
 	}
@@ -87,8 +91,8 @@ func (h *PeerHandler) QueueCapacity() int {
 
 // HandleMessage processes a RIS message to track peer information.
 // It extracts the peer IP address and ASN from the message and adds
-// the update to an internal batch. When the batch reaches peerBatchSize
+// the update to an internal batch. The flush goroutine writes the batch to the
-// or the batch timeout expires, the batch is flushed to the database.
+// database when it reaches peerBatchSize or the batch timeout expires.
 func (h *PeerHandler) HandleMessage(msg *ristypes.RISMessage) {
 	// Parse peer ASN from string
 	peerASN := 0
@@ -109,13 +113,18 @@ func (h *PeerHandler) HandleMessage(msg *ristypes.RISMessage) {
 		timestamp:   msg.ParsedTimestamp,
 	})
 
-	// Check if we need to flush
+	// A full batch wakes the flush goroutine. If it is writing, the wake-up
+	// waits in batchFullCh and the batch keeps growing until the write ends.
 	if len(h.peerBatch) >= peerBatchSize {
-		h.flushBatchLocked()
+		select {
+		case h.batchFullCh <- struct{}{}:
+		default: // already woken
+		}
 	}
 }
 
-// flushLoop runs in a goroutine and periodically flushes batches
+// flushLoop runs in a goroutine, the only one that writes the batch: it
+// flushes when the batch is full, periodically, and once more on Stop.
 func (h *PeerHandler) flushLoop() {
 	defer h.wg.Done()
 	ticker := time.NewTicker(peerBatchTimeout)
@@ -124,31 +133,46 @@ func (h *PeerHandler) flushLoop() {
 	for {
 		select {
 		case <-ticker.C:
-			h.mu.Lock()
 			if time.Since(h.lastFlush) >= peerBatchTimeout {
-				h.flushBatchLocked()
+				h.flushBatch()
 			}
-			h.mu.Unlock()
+		case <-h.batchFullCh:
+			h.flushBatch()
 		case <-h.stopCh:
 			// Final flush
-			h.mu.Lock()
+			h.flushBatch()
-			h.flushBatchLocked()
-			h.mu.Unlock()
 
 			return
 		}
 	}
 }
 
-// flushBatchLocked flushes the peer batch to the database (must be called with mutex held)
+// takeBatch returns the pending updates and leaves an empty batch in their
-func (h *PeerHandler) flushBatchLocked() {
+// place for HandleMessage to fill.
+func (h *PeerHandler) takeBatch() []peerUpdate {
+	h.mu.Lock()
+	defer h.mu.Unlock()
+
 	if len(h.peerBatch) == 0 {
+		return nil
+	}
+	batch := h.peerBatch
+	h.peerBatch = make([]peerUpdate, 0, peerBatchSize)
+
+	return batch
+}
+
+// flushBatch takes the pending batch and writes it to the database, without
+// holding the mutex during the write.
+func (h *PeerHandler) flushBatch() {
+	batch := h.takeBatch()
+	if len(batch) == 0 {
 		return
 	}
 
 	// Deduplicate by peer IP, keeping the latest update for each peer
 	peerMap := make(map[string]peerUpdate)
-	for _, update := range h.peerBatch {
+	for _, update := range batch {
 		if existing, ok := peerMap[update.peerIP]; !ok || update.timestamp.After(existing.timestamp) {
 			peerMap[update.peerIP] = update
 		}
@@ -170,8 +194,6 @@ func (h *PeerHandler) flushBatchLocked() {
 		h.logger.Error("Failed to process peer batch", "error", err, "count", len(dbPeerMap))
 	}
 
-	// Clear batch
-	h.peerBatch = h.peerBatch[:0]
 	h.lastFlush = time.Now()
 }
 

internal/routewatch/prefixhandler.go

@@ -40,10 +40,13 @@ type PrefixHandler struct {
 	logger  *logger.Logger
 	metrics *metrics.Tracker
 
-	// Batching
+	// Batching. mu guards batch only: the flush goroutine takes the batch
+	// under mu and writes it after releasing mu, so HandleMessage never
+	// waits for a database write.
 	mu          sync.Mutex
 	batch       []prefixUpdate
-	lastFlush time.Time
+	batchFullCh chan struct{} // wakes the flush goroutine when batch is full
+	lastFlush   time.Time     // used only by the flush goroutine
 	stopCh      chan struct{}
 	wg          sync.WaitGroup
 }
@@ -63,6 +66,7 @@ func NewPrefixHandler(db database.Store, logger *logger.Logger) *PrefixHandler {
 		db:          db,
 		logger:      logger,
 		batch:       make([]prefixUpdate, 0, prefixBatchSize),
+		batchFullCh: make(chan struct{}, 1),
 		lastFlush:   time.Now(),
 		stopCh:      make(chan struct{}),
 	}
@@ -105,7 +109,24 @@ func (h *PrefixHandler) HandleMessage(msg *ristypes.RISMessage) {
 	h.mu.Lock()
 	defer h.mu.Unlock()
 
-	// Process announcements
+	// Withdrawals are queued before announcements, because the batch keeps
+	// each peer's last update for a prefix: a message that lists a prefix as
+	// both withdrawn and announced keeps the route (RFC 4271 section 4.3).
+	for _, prefix := range msg.Withdrawals {
+		h.batch = append(h.batch, prefixUpdate{
+			prefix:      canonicalPrefix(prefix),
+			originASN:   originASN, // Use the originASN from path if available
+			peer:        msg.Peer,
+			messageType: "withdrawal",
+			timestamp:   timestamp,
+			path:        msg.Path,
+		})
+		// Record withdrawal in metrics
+		if h.metrics != nil {
+			h.metrics.RecordWithdrawal()
+		}
+	}
+
 	for _, announcement := range msg.Announcements {
 		for _, prefix := range announcement.Prefixes {
 			h.batch = append(h.batch, prefixUpdate{
@@ -123,29 +144,18 @@ func (h *PrefixHandler) HandleMessage(msg *ristypes.RISMessage) {
 		}
 	}
 
-	// Process withdrawals
+	// A full batch wakes the flush goroutine. If it is writing, the wake-up
-	for _, prefix := range msg.Withdrawals {
+	// waits in batchFullCh and the batch keeps growing until the write ends.
-		h.batch = append(h.batch, prefixUpdate{
-			prefix:      canonicalPrefix(prefix),
-			originASN:   originASN, // Use the originASN from path if available
-			peer:        msg.Peer,
-			messageType: "withdrawal",
-			timestamp:   timestamp,
-			path:        msg.Path,
-		})
-		// Record withdrawal in metrics
-		if h.metrics != nil {
-			h.metrics.RecordWithdrawal()
-		}
-	}
-
-	// Check if we need to flush
 	if len(h.batch) >= prefixBatchSize {
-		h.flushBatchLocked()
+		select {
+		case h.batchFullCh <- struct{}{}:
+		default: // already woken
+		}
 	}
 }
 
-// flushLoop runs in a goroutine and periodically flushes batches
+// flushLoop runs in a goroutine, the only one that writes the batch: it
+// flushes when the batch is full, periodically, and once more on Stop.
 func (h *PrefixHandler) flushLoop() {
 	defer h.wg.Done()
 	ticker := time.NewTicker(prefixBatchTimeout)
@@ -154,39 +164,54 @@ func (h *PrefixHandler) flushLoop() {
 	for {
 		select {
 		case <-ticker.C:
-			h.mu.Lock()
 			if time.Since(h.lastFlush) >= prefixBatchTimeout {
-				h.flushBatchLocked()
+				h.flushBatch()
 			}
-			h.mu.Unlock()
+		case <-h.batchFullCh:
+			h.flushBatch()
 		case <-h.stopCh:
 			// Final flush
-			h.mu.Lock()
+			h.flushBatch()
-			h.flushBatchLocked()
-			h.mu.Unlock()
 
 			return
 		}
 	}
 }
 
-// flushBatchLocked flushes the prefix batch to the database (must be called with mutex held)
+// takeBatch returns the pending updates and leaves an empty batch in their
-func (h *PrefixHandler) flushBatchLocked() {
+// place for HandleMessage to fill.
+func (h *PrefixHandler) takeBatch() []prefixUpdate {
+	h.mu.Lock()
+	defer h.mu.Unlock()
+
 	if len(h.batch) == 0 {
+		return nil
+	}
+	batch := h.batch
+	h.batch = make([]prefixUpdate, 0, prefixBatchSize)
+
+	return batch
+}
+
+// flushBatch takes the pending batch and writes it to the database, without
+// holding the mutex during the write.
+func (h *PrefixHandler) flushBatch() {
+	batch := h.takeBatch()
+	if len(batch) == 0 {
 		return
 	}
 
 	startTime := time.Now()
-	batchSize := len(h.batch)
+	batchSize := len(batch)
 
-	// Group updates by prefix to deduplicate
+	// For each prefix and peer, keep only the last update the feed delivered.
-	// For each prefix, keep the latest update
+	// Updates from different peers for the same prefix are all kept. Arrival
-	prefixMap := make(map[string]prefixUpdate)
+	// order decides, not the timestamp: timestamps are whole seconds, so
-	for _, update := range h.batch {
+	// updates within one second carry the same one.
-		key := update.prefix
+	type prefixAndPeer struct{ prefix, peer string }
-		if existing, ok := prefixMap[key]; !ok || update.timestamp.After(existing.timestamp) {
+	lastUpdates := make(map[prefixAndPeer]prefixUpdate)
-			prefixMap[key] = update
+	for _, update := range batch {
-		}
+		lastUpdates[prefixAndPeer{update.prefix, update.peer}] = update
 	}
 
 	// Collect routes to upsert and delete
@@ -196,7 +221,7 @@ func (h *PrefixHandler) flushBatchLocked() {
 	// Collect unique prefixes to update
 	prefixesToUpdate := make(map[string]time.Time)
 
-	for _, update := range prefixMap {
+	for _, update := range lastUpdates {
 		// Track prefix for both announcements and withdrawals
 		if _, exists := prefixesToUpdate[update.prefix]; !exists || update.timestamp.After(prefixesToUpdate[update.prefix]) {
 			prefixesToUpdate[update.prefix] = update.timestamp
@@ -255,13 +280,11 @@ func (h *PrefixHandler) flushBatchLocked() {
 	elapsed := time.Since(startTime)
 	h.logger.Debug("Flushed prefix batch",
 		"batch_size", batchSize,
-		"unique_prefixes", len(prefixMap),
+		"unique_prefixes", len(prefixesToUpdate),
 		"success", successCount,
 		"duration_ms", elapsed.Milliseconds(),
 	)
 
-	// Clear batch
-	h.batch = h.batch[:0]
 	h.lastFlush = time.Now()
 }
 

internal/routewatch/prefixhandler_test.go

@@ -1,7 +1,9 @@
 package routewatch
 
 import (
+	"context"
 	"errors"
+	"slices"
 	"testing"
 	"time"
 
@@ -28,11 +30,6 @@ func TestPrefixHandlerStoresPrefixesTheIPLookupFinds(t *testing.T) {
 
 	// Built without NewPrefixHandler's flush timer, so the test flushes itself.
 	h := &PrefixHandler{db: db, logger: logger.New()}
-	flush := func() {
-		h.mu.Lock()
-		defer h.mu.Unlock()
-		h.flushBatchLocked()
-	}
 
 	ts := time.Date(2026, 1, 2, 3, 4, 5, 0, time.UTC)
 	h.HandleMessage(&ristypes.RISMessage{
@@ -44,7 +41,7 @@ func TestPrefixHandlerStoresPrefixesTheIPLookupFinds(t *testing.T) {
 			Prefixes: []string{"2001:db8:1::/48", "192.0.2.0/24"},
 		}},
 	})
-	flush()
+	h.flushBatch()
 
 	for ip, want := range map[string]string{
 		"2001:db8:1::1": "2001:db8:1::/48",
@@ -64,7 +61,7 @@ func TestPrefixHandlerStoresPrefixesTheIPLookupFinds(t *testing.T) {
 		ParsedTimestamp: ts.Add(time.Minute),
 		Withdrawals:     []string{"2001:db8:1:0:0:0:0:0/48", "192.0.2.0/24"},
 	})
-	flush()
+	h.flushBatch()
 
 	for _, ip := range []string{"2001:db8:1::1", "192.0.2.1"} {
 		if info, err := db.GetIPInfo(ip); !errors.Is(err, database.ErrNoRoute) {
@@ -72,3 +69,138 @@ func TestPrefixHandlerStoresPrefixesTheIPLookupFinds(t *testing.T) {
 		}
 	}
 }
+
+// TestPrefixHandlerAppliesEachPeersLastUpdateInABatch runs updates for one
+// prefix through the prefix handler into a real database. All updates carry the
+// same timestamp, as updates within one second of the feed do. Within a batch,
+// the last update each peer sent for the prefix decides whether that peer has a
+// live route for it, and updates from different peers are all applied. The
+// in-memory route count and prefix distribution must match the route table.
+func TestPrefixHandlerAppliesEachPeersLastUpdateInABatch(t *testing.T) {
+	const (
+		prefix           = "198.51.100.0/24"
+		prefixMaskLength = 24
+		otherPeerIP      = "2001:db8:ffff::2"
+	)
+
+	ts := time.Date(2026, 1, 2, 3, 4, 5, 0, time.UTC)
+	announce := func(peer string) *ristypes.RISMessage {
+		return &ristypes.RISMessage{
+			Peer:            peer,
+			Path:            ristypes.ASPath{testASNA, testASNB},
+			ParsedTimestamp: ts,
+			Announcements:   []ristypes.RISAnnouncement{{NextHop: peer, Prefixes: []string{prefix}}},
+		}
+	}
+	withdraw := func(peer string) *ristypes.RISMessage {
+		return &ristypes.RISMessage{Peer: peer, ParsedTimestamp: ts, Withdrawals: []string{prefix}}
+	}
+	announceAndWithdraw := func(peer string) *ristypes.RISMessage {
+		msg := announce(peer)
+		msg.Withdrawals = []string{prefix}
+
+		return msg
+	}
+
+	tests := []struct {
+		name string
+		// Each inner list is handled and then flushed as one batch.
+		batches [][]*ristypes.RISMessage
+		// The peers left with a live route for the prefix, by peer IP.
+		wantPeers []string
+	}{
+		{
+			name:      "two peers announce the prefix",
+			batches:   [][]*ristypes.RISMessage{{announce(testPeerIP), announce(otherPeerIP)}},
+			wantPeers: []string{testPeerIP, otherPeerIP},
+		},
+		{
+			name: "two peers withdraw the prefix",
+			batches: [][]*ristypes.RISMessage{
+				{announce(testPeerIP)},
+				{announce(otherPeerIP)},
+				{withdraw(testPeerIP), withdraw(otherPeerIP)},
+			},
+		},
+		{
+			name:    "a peer announces and then withdraws the prefix",
+			batches: [][]*ristypes.RISMessage{{announce(testPeerIP), withdraw(testPeerIP)}},
+		},
+		{
+			name: "a peer withdraws and then re-announces the prefix",
+			batches: [][]*ristypes.RISMessage{
+				{announce(testPeerIP)},
+				{withdraw(testPeerIP), announce(testPeerIP)},
+			},
+			wantPeers: []string{testPeerIP},
+		},
+		{
+			// RFC 4271 section 4.3: the announcement counts, not the withdrawal.
+			name: "one message announces and withdraws the prefix",
+			batches: [][]*ristypes.RISMessage{
+				{announce(testPeerIP)},
+				{announceAndWithdraw(testPeerIP)},
+			},
+			wantPeers: []string{testPeerIP},
+		},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			db, err := database.New(&config.Config{StateDir: t.TempDir()}, logger.New())
+			if err != nil {
+				t.Fatalf("failed to create database: %v", err)
+			}
+			defer func() { _ = db.Close() }()
+
+			// Built without NewPrefixHandler's flush timer, so the test flushes itself.
+			h := &PrefixHandler{db: db, logger: logger.New()}
+			for _, batch := range tt.batches {
+				for _, msg := range batch {
+					h.HandleMessage(msg)
+				}
+				h.flushBatch()
+			}
+
+			ctx := context.Background()
+			routes, _, err := db.GetPrefixDetailsContext(ctx, prefix)
+			if err != nil && !errors.Is(err, database.ErrNoRoute) {
+				t.Fatalf("GetPrefixDetailsContext: %v", err)
+			}
+			var gotPeers []string
+			for _, route := range routes {
+				gotPeers = append(gotPeers, route.PeerIP)
+			}
+			if !slices.Equal(gotPeers, tt.wantPeers) {
+				t.Errorf("peers with a live route for %s = %v, want %v", prefix, gotPeers, tt.wantPeers)
+			}
+
+			stats, err := db.GetStatsContext(ctx)
+			if err != nil {
+				t.Fatalf("GetStatsContext: %v", err)
+			}
+			tableRoutesV4, _, err := db.GetLiveRouteCountsContext(ctx)
+			if err != nil {
+				t.Fatalf("GetLiveRouteCountsContext: %v", err)
+			}
+			if stats.IPv4Routes != len(tt.wantPeers) || tableRoutesV4 != len(tt.wantPeers) {
+				t.Errorf("IPv4 live routes: %d in memory, %d in the table, want %d",
+					stats.IPv4Routes, tableRoutesV4, len(tt.wantPeers))
+			}
+
+			var wantDistribution []database.PrefixDistribution
+			if len(tt.wantPeers) > 0 {
+				wantDistribution = []database.PrefixDistribution{{MaskLength: prefixMaskLength, Count: 1}}
+			}
+			queryDistributionV4, _, err := db.GetPrefixDistributionContext(ctx)
+			if err != nil {
+				t.Fatalf("GetPrefixDistributionContext: %v", err)
+			}
+			if !slices.Equal(stats.IPv4PrefixDistribution, wantDistribution) ||
+				!slices.Equal(queryDistributionV4, wantDistribution) {
+				t.Errorf("IPv4 prefix distribution: %v in memory, %v from the table, want %v",
+					stats.IPv4PrefixDistribution, queryDistributionV4, wantDistribution)
+			}
+		})
+	}
+}

internal/server/handlers.go

@@ -7,6 +7,7 @@ import (
 	"errors"
 	"net"
 	"net/http"
+	"net/netip"
 	"runtime"
 	"sort"
 	"strconv"
@@ -748,10 +749,17 @@ func (s *Server) handlePrefixDetailJSON() http.HandlerFunc {
 			return
 		}
 
-		// Combine prefix and length into CIDR notation
+		// Look the prefix up in the text form net/netip prints, the form the
-		prefix := prefixParam + "/" + lenParam
+		// tables store, so that any valid way of writing it finds the route.
+		parsed, err := netip.ParsePrefix(prefixParam + "/" + lenParam)
+		if err != nil {
+			writeJSONError(w, http.StatusBadRequest, err.Error())
 
-		routes, err := s.db.GetPrefixDetailsContext(r.Context(), prefix)
+			return
+		}
+		prefix := parsed.Masked().String()
+
+		routes, _, err := s.db.GetPrefixDetailsContext(r.Context(), prefix)
 		if err != nil {
 			if errors.Is(err, database.ErrNoRoute) {
 				writeJSONError(w, http.StatusNotFound, err.Error())
@@ -912,10 +920,17 @@ func (s *Server) handlePrefixDetail() http.HandlerFunc {
 			return
 		}
 
-		// Combine prefix and length into CIDR notation
+		// Look the prefix up in the text form net/netip prints, the form the
-		prefix := prefixParam + "/" + lenParam
+		// tables store, so that any valid way of writing it finds the route.
+		parsed, err := netip.ParsePrefix(prefixParam + "/" + lenParam)
+		if err != nil {
+			http.Error(w, "Invalid prefix", http.StatusBadRequest)
 
-		routes, err := s.db.GetPrefixDetailsContext(r.Context(), prefix)
+			return
+		}
+		prefix := parsed.Masked().String()
+
+		routes, originASNs, err := s.db.GetPrefixDetailsContext(r.Context(), prefix)
 		if err != nil {
 			if errors.Is(err, database.ErrNoRoute) {
 				http.Error(w, "Prefix not found", http.StatusNotFound)
@@ -937,18 +952,10 @@ func (s *Server) handlePrefixDetail() http.HandlerFunc {
 		originMap := make(map[int]*ASNInfo)
 		for _, route := range routes {
 			if _, exists := originMap[route.OriginASN]; !exists {
-				// Get AS info from database
-				asInfo, _, _ := s.db.GetASDetailsContext(r.Context(), route.OriginASN)
-				handle := ""
-				description := ""
-				if asInfo != nil {
-					handle = asInfo.Handle
-					description = asInfo.Description
-				}
 				originMap[route.OriginASN] = &ASNInfo{
 					ASN:         route.OriginASN,
-					Handle:      handle,
+					Handle:      originASNs[route.OriginASN].Handle,
-					Description: description,
+					Description: originASNs[route.OriginASN].Description,
 					PeerCount:   0,
 				}
 			}

internal/server/handlers_test.go

@@ -3,10 +3,13 @@ package server
 import (
 	"context"
 	"encoding/json"
+	"errors"
+	"html"
 	"net/http"
 	"net/http/httptest"
 	"runtime"
 	"slices"
+	"strings"
 	"testing"
 	"time"
 
@@ -15,6 +18,7 @@ import (
 	"git.eeqj.de/sneak/routewatch/internal/logger"
 	"git.eeqj.de/sneak/routewatch/internal/metrics"
 	"git.eeqj.de/sneak/routewatch/internal/streamer"
+	"git.eeqj.de/sneak/routewatch/pkg/asinfo"
 	"github.com/google/uuid"
 )
 
@@ -148,6 +152,124 @@ func TestStatsHandlersAnswerFromMemory(t *testing.T) {
 	}
 }
 
+// TestPrefixDetailHandlersParsePrefix checks that both prefix pages find a
+// stored route whatever valid text form the URL writes its prefix in, and
+// answer 400 for a prefix that does not parse. The tables store the form
+// net/netip prints. Before the fix the URL text was looked up as typed, so
+// "2001:DB8:0:0::/32" was not found although "2001:db8::/32" was stored, and
+// "foo/24" answered 500 (https://git.eeqj.de/sneak/routewatch/issues/71).
+func TestPrefixDetailHandlersParsePrefix(t *testing.T) {
+	db, err := database.New(&config.Config{StateDir: t.TempDir()}, logger.New())
+	if err != nil {
+		t.Fatalf("database.New: %v", err)
+	}
+	t.Cleanup(func() { _ = db.Close() })
+
+	ts := time.Date(2026, 1, 2, 3, 4, 5, 0, time.UTC)
+	if err := db.UpsertLiveRouteBatch([]*database.LiveRoute{
+		{
+			ID: uuid.New(), Prefix: "192.0.2.0/24", MaskLength: 24, IPVersion: 4,
+			OriginASN: 64500, PeerIP: "198.51.100.1", ASPath: []int{64500}, NextHop: "198.51.100.1",
+			LastUpdated: ts,
+		},
+		{
+			ID: uuid.New(), Prefix: "2001:db8::/32", MaskLength: 32, IPVersion: 6,
+			OriginASN: 64501, PeerIP: "2001:db8::1", ASPath: []int{64501}, NextHop: "2001:db8::1",
+			LastUpdated: ts,
+		},
+	}); err != nil {
+		t.Fatalf("UpsertLiveRouteBatch: %v", err)
+	}
+
+	s := New(db, streamer.New(logger.New(), metrics.New()), logger.New(), &config.Config{})
+
+	tests := []struct {
+		path string
+		want int
+	}{
+		{"/api/v1/prefix/foo/24", http.StatusBadRequest},
+		{"/prefix/foo/24", http.StatusBadRequest},
+		{"/api/v1/prefix/2001:DB8:0:0::/32", http.StatusOK},
+		{"/prefix/2001:DB8:0:0::/32", http.StatusOK},
+		{"/api/v1/prefix/192.0.2.1/24", http.StatusOK},
+		{"/prefix/192.0.2.1/24", http.StatusOK},
+	}
+
+	for _, tt := range tests {
+		rec := httptest.NewRecorder()
+		s.router.ServeHTTP(rec, httptest.NewRequest(http.MethodGet, tt.path, nil))
+		if rec.Code != tt.want {
+			t.Errorf("%s: status %d, want %d; body %s", tt.path, rec.Code, tt.want, rec.Body)
+		}
+	}
+}
+
+// failingASDetailsDB wraps a real store and fails every AS details lookup.
+type failingASDetailsDB struct {
+	database.Store
+}
+
+func (failingASDetailsDB) GetASDetailsContext(_ context.Context, _ int) (*database.ASN, []database.LiveRoute, error) {
+	return nil, nil, errors.New("AS details lookup failed")
+}
+
+// TestPrefixDetailShowsOriginNames checks that the prefix page shows each
+// origin AS's handle and description without looking up the AS's details,
+// which also read every route the AS originates. Before the fix the page did
+// that lookup once per origin, so with it failing the names were missing
+// (https://git.eeqj.de/sneak/routewatch/issues/67). The AS path column shows
+// handles too, so the test looks for the origin list's "(handle)" form.
+func TestPrefixDetailShowsOriginNames(t *testing.T) {
+	db, err := database.New(&config.Config{StateDir: t.TempDir()}, logger.New())
+	if err != nil {
+		t.Fatalf("database.New: %v", err)
+	}
+	t.Cleanup(func() { _ = db.Close() })
+
+	ts := time.Date(2026, 1, 2, 3, 4, 5, 0, time.UTC)
+	origins := []int{15169, 13335}
+	for _, asn := range origins {
+		if _, err := db.GetOrCreateASN(asn, ts); err != nil {
+			t.Fatalf("GetOrCreateASN(%d): %v", asn, err)
+		}
+	}
+	if err := db.UpsertLiveRouteBatch([]*database.LiveRoute{
+		{
+			ID: uuid.New(), Prefix: "192.0.2.0/24", MaskLength: 24, IPVersion: 4,
+			OriginASN: origins[0], PeerIP: "198.51.100.1", ASPath: []int{origins[0]}, NextHop: "198.51.100.1",
+			LastUpdated: ts,
+		},
+		{
+			ID: uuid.New(), Prefix: "192.0.2.0/24", MaskLength: 24, IPVersion: 4,
+			OriginASN: origins[1], PeerIP: "198.51.100.2", ASPath: []int{origins[1]}, NextHop: "198.51.100.2",
+			LastUpdated: ts,
+		},
+	}); err != nil {
+		t.Fatalf("UpsertLiveRouteBatch: %v", err)
+	}
+
+	s := New(failingASDetailsDB{db}, streamer.New(logger.New(), metrics.New()), logger.New(), &config.Config{})
+	rec := httptest.NewRecorder()
+	s.router.ServeHTTP(rec, httptest.NewRequest(http.MethodGet, "/prefix/192.0.2.0/24", nil))
+	if rec.Code != http.StatusOK {
+		t.Fatalf("status %d, want %d; body %s", rec.Code, http.StatusOK, rec.Body)
+	}
+
+	page := rec.Body.String()
+	for _, asn := range origins {
+		info, ok := asinfo.Get(asn)
+		if !ok {
+			t.Fatalf("AS%d is not in the AS info data", asn)
+		}
+		if want := "(" + html.EscapeString(info.Handle) + ")"; !strings.Contains(page, want) {
+			t.Errorf("page does not show AS%d's handle %q", asn, want)
+		}
+		if want := html.EscapeString(info.Description); !strings.Contains(page, want) {
+			t.Errorf("page does not show AS%d's description %q", asn, want)
+		}
+	}
+}
+
 // settledGoroutineCount lets transient goroutines finish, then reports the
 // current count.
 func settledGoroutineCount() int {

internal/server/server.go

@@ -3,6 +3,8 @@ package server
 
 import (
 	"context"
+	"fmt"
+	"net"
 	"net/http"
 	"strconv"
 	"time"
@@ -53,9 +55,12 @@ func New(db database.Store, streamer *streamer.Streamer, logger *logger.Logger,
 	return s
 }
 
-// Start starts the HTTP server
+// Start listens on the configured port and serves HTTP in the background.
+// It returns an error if it cannot listen, for example because the port is
+// already in use.
 func (s *Server) Start() error {
 	const (
+		network           = "tcp"
 		readHeaderTimeout = 40 * time.Second
 		readTimeout       = 60 * time.Second
 		writeTimeout      = 60 * time.Second
@@ -73,10 +78,15 @@ func (s *Server) Start() error {
 
 	s.logger.Info("Starting HTTP server", "port", s.port, "addr", s.srv.Addr)
 
-	// Start in goroutine but log when actually listening
+	listener, err := net.Listen(network, s.srv.Addr)
+	if err != nil {
+		return fmt.Errorf("starting HTTP server: %w", err)
+	}
+
+	s.logger.Info("HTTP server listening", "addr", listener.Addr().String())
+
 	go func() {
-		s.logger.Info("HTTP server listening", "addr", s.srv.Addr)
+		if err := s.srv.Serve(listener); err != nil && err != http.ErrServerClosed {
-		if err := s.srv.ListenAndServe(); err != nil && err != http.ErrServerClosed {
 			s.logger.Error("HTTP server error", "error", err)
 		}
 	}()

internal/server/server_test.go

@@ -0,0 +1,33 @@
+package server
+
+import (
+	"context"
+	"net"
+	"testing"
+
+	"git.eeqj.de/sneak/routewatch/internal/config"
+	"git.eeqj.de/sneak/routewatch/internal/logger"
+	"git.eeqj.de/sneak/routewatch/internal/metrics"
+	"git.eeqj.de/sneak/routewatch/internal/streamer"
+)
+
+// TestStartFailsWhenPortIsHeld holds a port with a listener of its own and
+// checks that Start on that port returns an error. Before the fix Start
+// listened in a goroutine, only logged the failure and returned nil, so the
+// daemon kept running without its web server.
+func TestStartFailsWhenPortIsHeld(t *testing.T) {
+	held, err := net.Listen("tcp", ":0")
+	if err != nil {
+		t.Fatalf("failed to open the test listener: %v", err)
+	}
+	defer func() { _ = held.Close() }()
+
+	port := held.Addr().(*net.TCPAddr).Port
+	log := logger.New()
+	s := New(nil, streamer.New(log, metrics.New()), log, &config.Config{Port: port})
+	defer func() { _ = s.Stop(context.Background()) }()
+
+	if err := s.Start(); err == nil {
+		t.Fatalf("Start returned nil while port %d was held by another listener", port)
+	}
+}

internal/streamer/streamer.go

@@ -7,6 +7,7 @@ import (
 	"compress/gzip"
 	"context"
 	"encoding/json"
+	"errors"
 	"fmt"
 	"io"
 	"math"
@@ -48,6 +49,7 @@ const (
 	metricsUpdateRate     = time.Second
 	minBackoffDelay       = 5 * time.Second
 	maxBackoffDelay       = 320 * time.Second
+	streamIdleTimeout     = 60 * time.Second // Reconnect when no line arrives for this long
 	metricsLogInterval    = 10 * time.Second
 	bytesPerKB            = 1024
 	bytesPerMB            = 1024 * 1024
@@ -58,6 +60,9 @@ const (
 	backpressureSlope     = 2.0 // Slope for linear drop probability increase
 )
 
+// errStreamEnded is returned by stream when RIS Live ends the response.
+var errStreamEnded = errors.New("RIS Live ended the stream")
+
 // MessageHandler defines the interface for processing RIS messages.
 // Implementations must specify which message types they want to receive,
 // how to process messages, and their desired queue capacity.
@@ -107,6 +112,8 @@ type Streamer struct {
 	logger       *logger.Logger
 	client       *http.Client
 	url          string
+	idleTimeout  time.Duration // Drop the connection when no line arrives for this long
+	minBackoff   time.Duration // First wait before reconnecting; doubles up to maxBackoffDelay
 	handlers     []*handlerInfo
 	rawHandler   RawMessageHandler
 	mu           sync.RWMutex
@@ -126,6 +133,8 @@ func New(logger *logger.Logger, metrics *metrics.Tracker) *Streamer {
 	return &Streamer{
 		logger:      logger,
 		url:         risLiveURL,
+		idleTimeout: streamIdleTimeout,
+		minBackoff:  minBackoffDelay,
 		client: &http.Client{
 			Timeout: 0, // No timeout for streaming
 			Transport: &http.Transport{
@@ -405,7 +414,7 @@ func (s *Streamer) updateMetrics(messageBytes int) {
 
 // streamWithReconnect handles streaming with automatic reconnection and exponential backoff
 func (s *Streamer) streamWithReconnect(ctx context.Context) {
-	backoffDelay := minBackoffDelay
+	backoffDelay := s.minBackoff
 	consecutiveFailures := 0
 
 	for {
@@ -422,8 +431,9 @@ func (s *Streamer) streamWithReconnect(ctx context.Context) {
 		err := s.stream(ctx)
 		streamDuration := time.Since(startTime)
 
-		if err == nil {
+		// Only Stop ends the streamer. A stream that ends any other way,
-			// Clean exit (context cancelled)
+		// with or without an error, is a disconnect and is reconnected.
+		if ctx.Err() != nil {
 			return
 		}
 
@@ -434,17 +444,13 @@ func (s *Streamer) streamWithReconnect(ctx context.Context) {
 			"stream_duration", streamDuration)
 		s.metrics.SetConnected(false)
 
-		// Check if context is cancelled
+		// A stream that lasted more than 30 seconds resets the backoff. That
-		if ctx.Err() != nil {
+		// includes a stream dropped after streamIdleTimeout with no line, so
-			return
+		// a silent feed is retried after the first backoff delay every time.
-		}
-
-		// If we streamed for more than 30 seconds, reset the backoff
-		// This indicates we had a successful connection that received data
 		if streamDuration > 30*time.Second {
 			s.logger.Info("Resetting backoff delay due to successful connection",
 				"stream_duration", streamDuration)
-			backoffDelay = minBackoffDelay
+			backoffDelay = s.minBackoff
 			consecutiveFailures = 0
 		} else {
 			// Increment consecutive failures
@@ -477,7 +483,13 @@ func (s *Streamer) stream(ctx context.Context) error {
 	connCtx, connCancel := context.WithCancel(ctx)
 	defer connCancel()
 
-	req, err := http.NewRequestWithContext(ctx, "GET", s.url, nil)
+	// The idle timer drops the connection, by cancelling connCtx, when no
+	// line arrives for s.idleTimeout. Each line read starts it over. It
+	// also covers the wait for the server to answer.
+	idleTimer := time.AfterFunc(s.idleTimeout, connCancel)
+	defer idleTimer.Stop()
+
+	req, err := http.NewRequestWithContext(connCtx, "GET", s.url, nil)
 	if err != nil {
 		return fmt.Errorf("failed to create request: %w", err)
 	}
@@ -559,6 +571,8 @@ func (s *Streamer) stream(ctx context.Context) error {
 	scanner := bufio.NewScanner(reader)
 
 	for scanner.Scan() {
+		idleTimer.Reset(s.idleTimeout)
+
 		select {
 		case <-ctx.Done():
 			s.logger.Info("Stream stopped by context")
@@ -707,11 +721,19 @@ func (s *Streamer) stream(ctx context.Context) error {
 		s.mu.RUnlock()
 	}
 
+	if ctx.Err() != nil {
+		return ctx.Err()
+	}
+
+	if connCtx.Err() != nil {
+		return fmt.Errorf("no line received for %s", s.idleTimeout)
+	}
+
 	if err := scanner.Err(); err != nil {
 		return fmt.Errorf("scanner error: %w", err)
 	}
 
-	return nil
+	return errStreamEnded
 }
 
 // shouldDropForBackpressure determines if a message should be dropped based on queue utilization

internal/streamer/streamer_test.go

@@ -7,6 +7,7 @@ import (
 	"net/http"
 	"net/http/httptest"
 	"runtime"
+	"sync/atomic"
 	"testing"
 	"time"
 
@@ -39,6 +40,14 @@ func TestNewStreamer(t *testing.T) {
 	if s.metrics != metricsTracker {
 		t.Error("metrics tracker not set correctly")
 	}
+
+	if s.idleTimeout != streamIdleTimeout {
+		t.Errorf("idleTimeout = %s, want %s", s.idleTimeout, streamIdleTimeout)
+	}
+
+	if s.minBackoff != minBackoffDelay {
+		t.Errorf("minBackoff = %s, want %s", s.minBackoff, minBackoffDelay)
+	}
 }
 
 // TestStreamDoesNotLeakTickersAcrossReconnects drives many short-lived
@@ -57,8 +66,8 @@ func TestStreamDoesNotLeakTickersAcrossReconnects(t *testing.T) {
 
 	// One warm-up connection so any persistent HTTP transport goroutine exists
 	// before we take the baseline.
-	if err := s.stream(context.Background()); err != nil {
+	if err := s.stream(context.Background()); !errors.Is(err, errStreamEnded) {
-		t.Fatalf("warm-up stream returned error: %v", err)
+		t.Fatalf("warm-up stream returned %v, want %v", err, errStreamEnded)
 	}
 	s.client.CloseIdleConnections()
 
@@ -66,8 +75,8 @@ func TestStreamDoesNotLeakTickersAcrossReconnects(t *testing.T) {
 
 	const reconnects = 20
 	for range reconnects {
-		if err := s.stream(context.Background()); err != nil {
+		if err := s.stream(context.Background()); !errors.Is(err, errStreamEnded) {
-			t.Fatalf("stream returned error: %v", err)
+			t.Fatalf("stream returned %v, want %v", err, errStreamEnded)
 		}
 	}
 	s.client.CloseIdleConnections()
@@ -78,23 +87,35 @@ func TestStreamDoesNotLeakTickersAcrossReconnects(t *testing.T) {
 	}
 }
 
-// updateHandler wants UPDATE messages and does nothing with them.
+// updateLine is one UPDATE message as RIS Live sends it.
-type updateHandler struct{}
+const updateLine = `{"type":"ris_message","data":{"type":"UPDATE","peer":"192.0.2.1",` +
+	`"peer_asn":"64496","timestamp":1700000000}}` + "\n"
+
+// updateHandler wants UPDATE messages. For each one it handles it sends on
+// handled if there is room, and otherwise does nothing; a nil handled is
+// never sent on.
+type updateHandler struct {
+	handled chan struct{}
+}
 
 func (updateHandler) WantsMessage(messageType string) bool { return messageType == "UPDATE" }
-func (updateHandler) HandleMessage(*ristypes.RISMessage)   {}
 func (updateHandler) QueueCapacity() int                   { return 10 }
 
+func (h updateHandler) HandleMessage(*ristypes.RISMessage) {
+	select {
+	case h.handled <- struct{}{}:
+	default:
+	}
+}
+
 // TestStopBeforeMessageReachesQueues stops the streamer after the read loop
 // has checked for cancellation but before it hands the message to the handler
 // queues. That is the gap a stop from another goroutine can land in, and it
 // used to end in "send on closed channel". The raw handler runs in that gap on
 // the read loop itself, so calling Stop from it hits the gap every time.
 func TestStopBeforeMessageReachesQueues(t *testing.T) {
-	const line = `{"type":"ris_message","data":{"type":"UPDATE","peer":"192.0.2.1",` +
-		`"peer_asn":"64496","timestamp":1700000000}}` + "\n"
 	srv := httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, _ *http.Request) {
-		_, _ = io.WriteString(w, line)
+		_, _ = io.WriteString(w, updateLine)
 	}))
 	defer srv.Close()
 
@@ -117,6 +138,117 @@ func TestStopBeforeMessageReachesQueues(t *testing.T) {
 	s.Stop()
 }
 
+// TestReconnectWhenStreamEnds has the server end the first response
+// normally, as when RIS Live restarts. The streamer must treat that as a
+// disconnect and connect again.
+func TestReconnectWhenStreamEnds(t *testing.T) {
+	endResponse := func(http.ResponseWriter, *http.Request) {}
+	checkReconnect(t, endResponse, streamIdleTimeout)
+}
+
+// TestReconnectWhenStreamGoesIdle has the server hold the first response
+// open without sending anything. The streamer must drop it once the idle
+// timeout passes and connect again.
+func TestReconnectWhenStreamGoesIdle(t *testing.T) {
+	const idleTimeout = 50 * time.Millisecond
+	holdResponse := func(w http.ResponseWriter, r *http.Request) {
+		w.(http.Flusher).Flush()
+		<-r.Context().Done()
+	}
+	checkReconnect(t, holdResponse, idleTimeout)
+}
+
+// TestReconnectWhenServerNeverAnswers has the server accept the first
+// request and never answer it, not even with headers. The streamer must give
+// up on it once the idle timeout passes and connect again.
+func TestReconnectWhenServerNeverAnswers(t *testing.T) {
+	const idleTimeout = 50 * time.Millisecond
+	neverAnswer := func(_ http.ResponseWriter, r *http.Request) {
+		<-r.Context().Done()
+	}
+	checkReconnect(t, neverAnswer, idleTimeout)
+}
+
+// TestStreamNotDroppedWhileLinesArrive has the server send lines well within
+// the idle timeout for several times the timeout, then end the response. Each
+// line must start the idle timeout over, so the stream lasts until the server
+// ends it instead of being dropped as idle.
+func TestStreamNotDroppedWhileLinesArrive(t *testing.T) {
+	const (
+		idleTimeout  = 100 * time.Millisecond
+		lineInterval = idleTimeout / 10
+		sendFor      = 5 * idleTimeout
+	)
+	srv := httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, _ *http.Request) {
+		deadline := time.Now().Add(sendFor)
+		for time.Now().Before(deadline) {
+			_, _ = io.WriteString(w, updateLine)
+			w.(http.Flusher).Flush()
+			time.Sleep(lineInterval)
+		}
+	}))
+	defer srv.Close()
+
+	s := New(logger.New(), metrics.New())
+	s.url = srv.URL
+	s.idleTimeout = idleTimeout
+
+	if err := s.stream(context.Background()); !errors.Is(err, errStreamEnded) {
+		t.Fatalf("stream returned %v, want %v", err, errStreamEnded)
+	}
+}
+
+// checkReconnect runs a streamer against a fake RIS Live server. The first
+// response is served by firstResponse; every later one carries one UPDATE
+// line and then stays open. The streamer must come back for a second
+// response, must not be marked connected when it does, and must handle the
+// UPDATE in it.
+func checkReconnect(t *testing.T, firstResponse http.HandlerFunc, idleTimeout time.Duration) {
+	t.Helper()
+
+	const maxWait = 5 * time.Second
+
+	tracker := metrics.New()
+	connectedAtReconnect := make(chan bool, 1)
+	var requests atomic.Int32
+	srv := httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		if requests.Add(1) == 1 {
+			firstResponse(w, r)
+
+			return
+		}
+		select {
+		case connectedAtReconnect <- tracker.IsConnected():
+		default:
+		}
+		_, _ = io.WriteString(w, updateLine)
+		w.(http.Flusher).Flush()
+		<-r.Context().Done()
+	}))
+	defer srv.Close()
+
+	s := New(logger.New(), tracker)
+	s.url = srv.URL
+	s.idleTimeout = idleTimeout
+	s.minBackoff = time.Millisecond
+	handler := updateHandler{handled: make(chan struct{}, 1)}
+	s.RegisterHandler(handler)
+	if err := s.Start(); err != nil {
+		t.Fatalf("Start returned error: %v", err)
+	}
+	defer s.Stop()
+
+	select {
+	case <-handler.handled:
+	case <-time.After(maxWait):
+		t.Fatalf("no message from a second response handled within %s", maxWait)
+	}
+
+	if <-connectedAtReconnect {
+		t.Error("streamer was still marked connected when it came back for a second response")
+	}
+}
+
 // settledGoroutineCount lets transient goroutines finish, then reports the
 // current count.
 func settledGoroutineCount() int {

internal/templates/prefix_detail.html

@@ -283,6 +283,7 @@
                 <div class="origin-item">
                     <a href="/as/{{.ASN}}" class="as-link">AS{{.ASN}}</a>
                     {{if .Handle}} ({{.Handle}}){{end}}
+                    {{if .Description}} {{.Description}}{{end}}
                     <span style="color: #7f8c8d; margin-left: 10px;">{{.PeerCount}} peer{{if ne .PeerCount 1}}s{{end}}</span>
                 </div>
                 {{end}}