Write each handler batch from its flush goroutine, outside the mutex (closes #65)

The AS, peer and prefix handlers wrote their batch to the database while
holding the mutex HandleMessage needs, and HandleMessage wrote a full batch
itself. For as long as a write took, the handler took nothing off its queue,
and the streamer dropped updates once the queue was half full.

Now only the flush goroutine writes: it takes the batch under the mutex,
releases it, then writes. A full batch wakes the flush goroutine instead.
Stop still writes what the handler holds.

While a write runs, the next batch has no size limit; the README memory
section says so.

Model: opus-5-5

README.md

@@ -141,7 +141,10 @@ routewatch/
 - **Batched Writes**: All database operations are batched for performance
 - **Backpressure**: Probabilistic message dropping when queues exceed 50% capacity
 - **Graceful Shutdown**: 60-second timeout, flushes all pending batches
-- **Reconnection**: Exponential backoff (5s-320s) with reset after 30s of stable connection
+- **Reconnection**: Any end of the stream other than shutdown, including RIS Live
+  ending the response normally, marks the feed disconnected and reconnects with
+  exponential backoff (5s-320s). The backoff resets after a stream that lasted
+  more than 30s. A stream with no line for 60s is dropped and reconnected.
 - **IP Lookup**: the most specific live route is found by looking up the
   address's prefix at each mask length, longest first, in the prefix index
   (at most 25 lookups for IPv4, 113 for IPv6); prefixes are stored in the
@@ -230,6 +233,10 @@ What happens at each limit:
   keeps running.
 - Handler queues: each of the four handler queues holds at most 20,000 messages.
   When a queue fills, the streamer drops messages instead of blocking.
+- Handler batches: while the AS, peer or prefix handler writes a batch to the
+  database, the updates that arrive collect in its next batch, which has no size
+  limit. A database that stays slower than the feed grows memory instead of
+  dropping updates.
 
 With `DEBUG=routewatch` the daemon logs a `System stats` line every 60 seconds
 with the goroutine count and Go memory figures.

internal/database/database.go

@@ -1632,16 +1632,17 @@ func (d *Database) GetASPeersContext(ctx context.Context, asn int) ([]ASPeer, er
 }
 
 // GetPrefixDetails returns detailed information about a prefix
-func (d *Database) GetPrefixDetails(prefix string) ([]LiveRoute, error) {
+func (d *Database) GetPrefixDetails(prefix string) ([]LiveRoute, map[int]ASN, error) {
 	return d.GetPrefixDetailsContext(context.Background(), prefix)
 }
 
-// GetPrefixDetailsContext returns detailed information about a prefix with context support
-func (d *Database) GetPrefixDetailsContext(ctx context.Context, prefix string) ([]LiveRoute, error) {
+// GetPrefixDetailsContext returns the live routes for a prefix and, keyed by
+// AS number, the handle and description of each AS that originates it.
+func (d *Database) GetPrefixDetailsContext(ctx context.Context, prefix string) ([]LiveRoute, map[int]ASN, error) {
 	// Determine if it's IPv4 or IPv6 by parsing the prefix
 	_, ipnet, err := net.ParseCIDR(prefix)
 	if err != nil {
-		return nil, fmt.Errorf("invalid prefix format: %w", err)
+		return nil, nil, fmt.Errorf("invalid prefix format: %w", err)
 	}
 
 	tableName := "live_routes_v4"
@@ -1663,11 +1664,12 @@ func (d *Database) GetPrefixDetailsContext(ctx context.Context, prefix string) (
 
 	rows, err := d.db.QueryContext(ctx, query, prefix)
 	if err != nil {
-		return nil, fmt.Errorf("failed to query prefix details: %w", err)
+		return nil, nil, fmt.Errorf("failed to query prefix details: %w", err)
 	}
 	defer func() { _ = rows.Close() }()
 
 	var routes []LiveRoute
+	origins := make(map[int]ASN)
 	for rows.Next() {
 		var route LiveRoute
 		var pathJSON string
@@ -1690,13 +1692,18 @@ func (d *Database) GetPrefixDetailsContext(ctx context.Context, prefix string) (
 		route.IPVersion = ipVersion
 		route.MaskLength, _ = ipnet.Mask.Size()
 		routes = append(routes, route)
+		origins[route.OriginASN] = ASN{
+			ASN:         route.OriginASN,
+			Handle:      handle.String,
+			Description: description.String,
+		}
 	}
 
 	if len(routes) == 0 {
-		return nil, fmt.Errorf("%w: %s", ErrNoRoute, prefix)
+		return nil, nil, fmt.Errorf("%w: %s", ErrNoRoute, prefix)
 	}
 
-	return routes, nil
+	return routes, origins, nil
 }
 
 // GetRandomPrefixesByLength returns a random sample of prefixes with the specified mask length

internal/database/interface.go

@@ -76,8 +76,8 @@ type Store interface {
 	GetASDetailsContext(ctx context.Context, asn int) (*ASN, []LiveRoute, error)
 	GetASPeers(asn int) ([]ASPeer, error)
 	GetASPeersContext(ctx context.Context, asn int) ([]ASPeer, error)
-	GetPrefixDetails(prefix string) ([]LiveRoute, error)
-	GetPrefixDetailsContext(ctx context.Context, prefix string) ([]LiveRoute, error)
+	GetPrefixDetails(prefix string) ([]LiveRoute, map[int]ASN, error)
+	GetPrefixDetailsContext(ctx context.Context, prefix string) ([]LiveRoute, map[int]ASN, error)
 	GetRandomPrefixesByLength(maskLength, ipVersion, limit int) ([]LiveRoute, error)
 	GetRandomPrefixesByLengthContext(ctx context.Context, maskLength, ipVersion, limit int) ([]LiveRoute, error)
 

internal/routewatch/app_integration_test.go

@@ -252,13 +252,15 @@ func (m *mockStore) GetASDetailsContext(ctx context.Context, asn int) (*database
 }
 
 // GetPrefixDetails mock implementation
-func (m *mockStore) GetPrefixDetails(prefix string) ([]database.LiveRoute, error) {
+func (m *mockStore) GetPrefixDetails(prefix string) ([]database.LiveRoute, map[int]database.ASN, error) {
 	// Return empty routes for now
-	return []database.LiveRoute{}, nil
+	return []database.LiveRoute{}, map[int]database.ASN{}, nil
 }
 
 // GetPrefixDetailsContext mock implementation with context support
-func (m *mockStore) GetPrefixDetailsContext(ctx context.Context, prefix string) ([]database.LiveRoute, error) {
+func (m *mockStore) GetPrefixDetailsContext(
+	ctx context.Context, prefix string,
+) ([]database.LiveRoute, map[int]database.ASN, error) {
 	return m.GetPrefixDetails(prefix)
 }
 

internal/routewatch/ashandler.go

@@ -32,12 +32,15 @@ type ASHandler struct {
 	db     database.Store
 	logger *logger.Logger
 
-	// Batching
-	mu        sync.Mutex
-	batch     []asnOp
-	lastFlush time.Time
-	stopCh    chan struct{}
-	wg        sync.WaitGroup
+	// Batching. mu guards batch only: the flush goroutine takes the batch
+	// under mu and writes it after releasing mu, so HandleMessage never
+	// waits for a database write.
+	mu          sync.Mutex
+	batch       []asnOp
+	batchFullCh chan struct{} // wakes the flush goroutine when batch is full
+	lastFlush   time.Time     // used only by the flush goroutine
+	stopCh      chan struct{}
+	wg          sync.WaitGroup
 }
 
 type asnOp struct {
@@ -52,11 +55,12 @@ type asnOp struct {
 // background goroutine is terminated.
 func NewASHandler(db database.Store, logger *logger.Logger) *ASHandler {
 	h := &ASHandler{
-		db:        db,
-		logger:    logger,
-		batch:     make([]asnOp, 0, asnBatchSize),
-		lastFlush: time.Now(),
-		stopCh:    make(chan struct{}),
+		db:          db,
+		logger:      logger,
+		batch:       make([]asnOp, 0, asnBatchSize),
+		batchFullCh: make(chan struct{}, 1),
+		lastFlush:   time.Now(),
+		stopCh:      make(chan struct{}),
 	}
 
 	// Start the flush timer goroutine
@@ -85,8 +89,8 @@ func (h *ASHandler) QueueCapacity() int {
 // HandleMessage processes a RIS Live BGP message by extracting all ASNs from
 // the AS path and queuing them for batch insertion into the database. The
 // origin ASN (last element in the path) and all transit ASNs are recorded
-// with their associated timestamps. The batch is automatically flushed when
-// it reaches the configured size threshold.
+// with their associated timestamps. When the batch reaches the configured size
+// threshold, the flush goroutine is woken to write it.
 func (h *ASHandler) HandleMessage(msg *ristypes.RISMessage) {
 	// Use the pre-parsed timestamp
 	timestamp := msg.ParsedTimestamp
@@ -118,13 +122,18 @@ func (h *ASHandler) HandleMessage(msg *ristypes.RISMessage) {
 		}
 	}
 
-	// Check if we need to flush
+	// A full batch wakes the flush goroutine. If it is writing, the wake-up
+	// waits in batchFullCh and the batch keeps growing until the write ends.
 	if len(h.batch) >= asnBatchSize {
-		h.flushBatchLocked()
+		select {
+		case h.batchFullCh <- struct{}{}:
+		default: // already woken
+		}
 	}
 }
 
-// flushLoop runs in a goroutine and periodically flushes batches
+// flushLoop runs in a goroutine, the only one that writes the batch: it
+// flushes when the batch is full, periodically, and once more on Stop.
 func (h *ASHandler) flushLoop() {
 	defer h.wg.Done()
 	ticker := time.NewTicker(asnBatchTimeout)
@@ -133,31 +142,46 @@ func (h *ASHandler) flushLoop() {
 	for {
 		select {
 		case <-ticker.C:
-			h.mu.Lock()
 			if time.Since(h.lastFlush) >= asnBatchTimeout {
-				h.flushBatchLocked()
+				h.flushBatch()
 			}
-			h.mu.Unlock()
+		case <-h.batchFullCh:
+			h.flushBatch()
 		case <-h.stopCh:
 			// Final flush
-			h.mu.Lock()
-			h.flushBatchLocked()
-			h.mu.Unlock()
+			h.flushBatch()
 
 			return
 		}
 	}
 }
 
-// flushBatchLocked flushes the ASN batch to the database (must be called with mutex held)
-func (h *ASHandler) flushBatchLocked() {
+// takeBatch returns the pending operations and leaves an empty batch in their
+// place for HandleMessage to fill.
+func (h *ASHandler) takeBatch() []asnOp {
+	h.mu.Lock()
+	defer h.mu.Unlock()
+
 	if len(h.batch) == 0 {
+		return nil
+	}
+	batch := h.batch
+	h.batch = make([]asnOp, 0, asnBatchSize)
+
+	return batch
+}
+
+// flushBatch takes the pending batch and writes it to the database, without
+// holding the mutex during the write.
+func (h *ASHandler) flushBatch() {
+	batch := h.takeBatch()
+	if len(batch) == 0 {
 		return
 	}
 
 	// Process ASNs first (deduped)
 	asnMap := make(map[int]time.Time)
-	for _, op := range h.batch {
+	for _, op := range batch {
 		if existing, ok := asnMap[op.number]; !ok || op.timestamp.After(existing) {
 			asnMap[op.number] = op.timestamp
 		}
@@ -168,8 +192,6 @@ func (h *ASHandler) flushBatchLocked() {
 		h.logger.Error("Failed to process ASN batch", "error", err, "count", len(asnMap))
 	}
 
-	// Clear batch
-	h.batch = h.batch[:0]
 	h.lastFlush = time.Now()
 }
 

internal/routewatch/batchwrite_test.go

@@ -0,0 +1,192 @@
+package routewatch
+
+import (
+	"slices"
+	"sync"
+	"testing"
+	"time"
+
+	"git.eeqj.de/sneak/routewatch/internal/database"
+	"git.eeqj.de/sneak/routewatch/internal/logger"
+	"git.eeqj.de/sneak/routewatch/internal/ristypes"
+)
+
+// handleMessageTimeout is how long a test waits for HandleMessage to return,
+// or for a write to start, before it fails.
+const handleMessageTimeout = 2 * time.Second
+
+// blockingStore is a mockStore whose batch writes for the AS, peer and prefix
+// handlers wait until the test closes release. writeStarted is closed when the
+// first of them starts. It records what each write was given.
+type blockingStore struct {
+	*mockStore
+
+	release      chan struct{}
+	writeStarted chan struct{}
+	startOnce    sync.Once
+
+	mu       sync.Mutex
+	prefixes map[string]bool
+	asns     map[int]bool
+	peers    map[string]bool
+}
+
+func newBlockingStore() *blockingStore {
+	return &blockingStore{
+		mockStore:    newMockStore(),
+		release:      make(chan struct{}),
+		writeStarted: make(chan struct{}),
+		prefixes:     make(map[string]bool),
+		asns:         make(map[int]bool),
+		peers:        make(map[string]bool),
+	}
+}
+
+func (s *blockingStore) waitForRelease() {
+	s.startOnce.Do(func() { close(s.writeStarted) })
+	<-s.release
+}
+
+func (s *blockingStore) UpsertLiveRouteBatch(routes []*database.LiveRoute) error {
+	s.waitForRelease()
+	s.mu.Lock()
+	defer s.mu.Unlock()
+	for _, route := range routes {
+		s.prefixes[route.Prefix] = true
+	}
+
+	return nil
+}
+
+func (s *blockingStore) GetOrCreateASNBatch(asns map[int]time.Time) error {
+	s.waitForRelease()
+	s.mu.Lock()
+	defer s.mu.Unlock()
+	for asn := range asns {
+		s.asns[asn] = true
+	}
+
+	return nil
+}
+
+func (s *blockingStore) UpdatePeerBatch(peers map[string]database.PeerUpdate) error {
+	s.waitForRelease()
+	s.mu.Lock()
+	defer s.mu.Unlock()
+	for peerIP := range peers {
+		s.peers[peerIP] = true
+	}
+
+	return nil
+}
+
+// returnsInTime reports whether f returns within handleMessageTimeout.
+func returnsInTime(f func()) bool {
+	done := make(chan struct{})
+	go func() {
+		f()
+		close(done)
+	}()
+
+	select {
+	case <-done:
+		return true
+	case <-time.After(handleMessageTimeout):
+		return false
+	}
+}
+
+// handleWhileAWriteIsBlocked hands h the messages in fill, which fill its
+// batch so that the handler writes it to store, waits until the write starts,
+// and hands h the message extra while store holds the write. HandleMessage
+// must return each time. Then it lets the writes finish and stops h, which
+// writes what it holds.
+func handleWhileAWriteIsBlocked(
+	t *testing.T,
+	store *blockingStore,
+	h interface {
+		HandleMessage(*ristypes.RISMessage)
+		Stop()
+	},
+	fill []*ristypes.RISMessage,
+	extra *ristypes.RISMessage,
+) {
+	t.Helper()
+	defer h.Stop()
+	defer close(store.release)
+
+	if !returnsInTime(func() {
+		for _, msg := range fill {
+			h.HandleMessage(msg)
+		}
+	}) {
+		t.Fatal("HandleMessage did not return after filling the batch: it waits for the database write")
+	}
+
+	select {
+	case <-store.writeStarted:
+	case <-time.After(handleMessageTimeout):
+		t.Fatal("the handler did not write its full batch")
+	}
+
+	if !returnsInTime(func() { h.HandleMessage(extra) }) {
+		t.Fatal("HandleMessage did not return while a database write was blocked")
+	}
+}
+
+func TestPrefixHandlerHandlesMessagesWhileAWriteIsBlocked(t *testing.T) {
+	const (
+		fillPrefix  = "192.0.2.0/24"
+		extraPrefix = "198.51.100.0/24"
+	)
+
+	announce := func(prefixes []string) *ristypes.RISMessage {
+		return &ristypes.RISMessage{
+			Peer:          testPeerIP,
+			Path:          ristypes.ASPath{testASNA},
+			Announcements: []ristypes.RISAnnouncement{{NextHop: testPeerIP, Prefixes: prefixes}},
+		}
+	}
+
+	store := newBlockingStore()
+	h := NewPrefixHandler(store, logger.New())
+	handleWhileAWriteIsBlocked(t, store, h,
+		[]*ristypes.RISMessage{announce(slices.Repeat([]string{fillPrefix}, prefixBatchSize))},
+		announce([]string{extraPrefix}))
+
+	store.mu.Lock()
+	defer store.mu.Unlock()
+	if !store.prefixes[extraPrefix] {
+		t.Errorf("Stop did not write %s, handled while a write was blocked", extraPrefix)
+	}
+}
+
+func TestASHandlerHandlesMessagesWhileAWriteIsBlocked(t *testing.T) {
+	store := newBlockingStore()
+	h := NewASHandler(store, logger.New())
+	handleWhileAWriteIsBlocked(t, store, h,
+		[]*ristypes.RISMessage{{Path: slices.Repeat(ristypes.ASPath{testASNA}, asnBatchSize)}},
+		&ristypes.RISMessage{Path: ristypes.ASPath{testASNB}})
+
+	store.mu.Lock()
+	defer store.mu.Unlock()
+	if !store.asns[testASNB] {
+		t.Errorf("Stop did not write AS%d, handled while a write was blocked", testASNB)
+	}
+}
+
+func TestPeerHandlerHandlesMessagesWhileAWriteIsBlocked(t *testing.T) {
+	const otherPeerIP = "2001:db8:ffff::2"
+
+	store := newBlockingStore()
+	h := NewPeerHandler(store, logger.New())
+	handleWhileAWriteIsBlocked(t, store, h,
+		slices.Repeat([]*ristypes.RISMessage{{Peer: testPeerIP}}, peerBatchSize),
+		&ristypes.RISMessage{Peer: otherPeerIP})
+
+	store.mu.Lock()
+	defer store.mu.Unlock()
+	if !store.peers[otherPeerIP] {
+		t.Errorf("Stop did not write peer %s, handled while a write was blocked", otherPeerIP)
+	}
+}

internal/routewatch/cli.go

@@ -20,6 +20,8 @@ const (
 	debugInterval = 60 * time.Second
 	// bytesPerMB is bytes per megabyte
 	bytesPerMB = 1024 * 1024
+	// failureExitCode is the exit status when RouteWatch stops on an error
+	failureExitCode = 1
 )
 
 // logDebugStats logs goroutine count and memory usage
@@ -83,6 +85,9 @@ func CLIEntry() {
 					go func() {
 						if err := rw.Run(ctx); err != nil {
 							logger.Error("RouteWatch error", "error", err)
+							if err := shutdowner.Shutdown(fx.ExitCode(failureExitCode)); err != nil {
+								logger.Error("Failed to shutdown gracefully", "error", err)
+							}
 						}
 					}()
 

internal/routewatch/peerhandler.go

@@ -35,12 +35,15 @@ type PeerHandler struct {
 	db     database.Store
 	logger *logger.Logger
 
-	// Batching
-	mu        sync.Mutex
-	peerBatch []peerUpdate
-	lastFlush time.Time
-	stopCh    chan struct{}
-	wg        sync.WaitGroup
+	// Batching. mu guards peerBatch only: the flush goroutine takes the batch
+	// under mu and writes it after releasing mu, so HandleMessage never
+	// waits for a database write.
+	mu          sync.Mutex
+	peerBatch   []peerUpdate
+	batchFullCh chan struct{} // wakes the flush goroutine when peerBatch is full
+	lastFlush   time.Time     // used only by the flush goroutine
+	stopCh      chan struct{}
+	wg          sync.WaitGroup
 }
 
 type peerUpdate struct {
@@ -56,11 +59,12 @@ type peerUpdate struct {
 // should be stopped by calling Stop when it is no longer needed.
 func NewPeerHandler(db database.Store, logger *logger.Logger) *PeerHandler {
 	h := &PeerHandler{
-		db:        db,
-		logger:    logger,
-		peerBatch: make([]peerUpdate, 0, peerBatchSize),
-		lastFlush: time.Now(),
-		stopCh:    make(chan struct{}),
+		db:          db,
+		logger:      logger,
+		peerBatch:   make([]peerUpdate, 0, peerBatchSize),
+		batchFullCh: make(chan struct{}, 1),
+		lastFlush:   time.Now(),
+		stopCh:      make(chan struct{}),
 	}
 
 	// Start the flush timer goroutine
@@ -87,8 +91,8 @@ func (h *PeerHandler) QueueCapacity() int {
 
 // HandleMessage processes a RIS message to track peer information.
 // It extracts the peer IP address and ASN from the message and adds
-// the update to an internal batch. When the batch reaches peerBatchSize
-// or the batch timeout expires, the batch is flushed to the database.
+// the update to an internal batch. The flush goroutine writes the batch to the
+// database when it reaches peerBatchSize or the batch timeout expires.
 func (h *PeerHandler) HandleMessage(msg *ristypes.RISMessage) {
 	// Parse peer ASN from string
 	peerASN := 0
@@ -109,13 +113,18 @@ func (h *PeerHandler) HandleMessage(msg *ristypes.RISMessage) {
 		timestamp:   msg.ParsedTimestamp,
 	})
 
-	// Check if we need to flush
+	// A full batch wakes the flush goroutine. If it is writing, the wake-up
+	// waits in batchFullCh and the batch keeps growing until the write ends.
 	if len(h.peerBatch) >= peerBatchSize {
-		h.flushBatchLocked()
+		select {
+		case h.batchFullCh <- struct{}{}:
+		default: // already woken
+		}
 	}
 }
 
-// flushLoop runs in a goroutine and periodically flushes batches
+// flushLoop runs in a goroutine, the only one that writes the batch: it
+// flushes when the batch is full, periodically, and once more on Stop.
 func (h *PeerHandler) flushLoop() {
 	defer h.wg.Done()
 	ticker := time.NewTicker(peerBatchTimeout)
@@ -124,31 +133,46 @@ func (h *PeerHandler) flushLoop() {
 	for {
 		select {
 		case <-ticker.C:
-			h.mu.Lock()
 			if time.Since(h.lastFlush) >= peerBatchTimeout {
-				h.flushBatchLocked()
+				h.flushBatch()
 			}
-			h.mu.Unlock()
+		case <-h.batchFullCh:
+			h.flushBatch()
 		case <-h.stopCh:
 			// Final flush
-			h.mu.Lock()
-			h.flushBatchLocked()
-			h.mu.Unlock()
+			h.flushBatch()
 
 			return
 		}
 	}
 }
 
-// flushBatchLocked flushes the peer batch to the database (must be called with mutex held)
-func (h *PeerHandler) flushBatchLocked() {
+// takeBatch returns the pending updates and leaves an empty batch in their
+// place for HandleMessage to fill.
+func (h *PeerHandler) takeBatch() []peerUpdate {
+	h.mu.Lock()
+	defer h.mu.Unlock()
+
 	if len(h.peerBatch) == 0 {
+		return nil
+	}
+	batch := h.peerBatch
+	h.peerBatch = make([]peerUpdate, 0, peerBatchSize)
+
+	return batch
+}
+
+// flushBatch takes the pending batch and writes it to the database, without
+// holding the mutex during the write.
+func (h *PeerHandler) flushBatch() {
+	batch := h.takeBatch()
+	if len(batch) == 0 {
 		return
 	}
 
 	// Deduplicate by peer IP, keeping the latest update for each peer
 	peerMap := make(map[string]peerUpdate)
-	for _, update := range h.peerBatch {
+	for _, update := range batch {
 		if existing, ok := peerMap[update.peerIP]; !ok || update.timestamp.After(existing.timestamp) {
 			peerMap[update.peerIP] = update
 		}
@@ -170,8 +194,6 @@ func (h *PeerHandler) flushBatchLocked() {
 		h.logger.Error("Failed to process peer batch", "error", err, "count", len(dbPeerMap))
 	}
 
-	// Clear batch
-	h.peerBatch = h.peerBatch[:0]
 	h.lastFlush = time.Now()
 }
 

internal/routewatch/prefixhandler.go

@@ -40,12 +40,15 @@ type PrefixHandler struct {
 	logger  *logger.Logger
 	metrics *metrics.Tracker
 
-	// Batching
-	mu        sync.Mutex
-	batch     []prefixUpdate
-	lastFlush time.Time
-	stopCh    chan struct{}
-	wg        sync.WaitGroup
+	// Batching. mu guards batch only: the flush goroutine takes the batch
+	// under mu and writes it after releasing mu, so HandleMessage never
+	// waits for a database write.
+	mu          sync.Mutex
+	batch       []prefixUpdate
+	batchFullCh chan struct{} // wakes the flush goroutine when batch is full
+	lastFlush   time.Time     // used only by the flush goroutine
+	stopCh      chan struct{}
+	wg          sync.WaitGroup
 }
 
 type prefixUpdate struct {
@@ -60,11 +63,12 @@ type prefixUpdate struct {
 // NewPrefixHandler creates a new batched prefix tracking handler
 func NewPrefixHandler(db database.Store, logger *logger.Logger) *PrefixHandler {
 	h := &PrefixHandler{
-		db:        db,
-		logger:    logger,
-		batch:     make([]prefixUpdate, 0, prefixBatchSize),
-		lastFlush: time.Now(),
-		stopCh:    make(chan struct{}),
+		db:          db,
+		logger:      logger,
+		batch:       make([]prefixUpdate, 0, prefixBatchSize),
+		batchFullCh: make(chan struct{}, 1),
+		lastFlush:   time.Now(),
+		stopCh:      make(chan struct{}),
 	}
 
 	// Start the flush timer goroutine
@@ -140,13 +144,18 @@ func (h *PrefixHandler) HandleMessage(msg *ristypes.RISMessage) {
 		}
 	}
 
-	// Check if we need to flush
+	// A full batch wakes the flush goroutine. If it is writing, the wake-up
+	// waits in batchFullCh and the batch keeps growing until the write ends.
 	if len(h.batch) >= prefixBatchSize {
-		h.flushBatchLocked()
+		select {
+		case h.batchFullCh <- struct{}{}:
+		default: // already woken
+		}
 	}
 }
 
-// flushLoop runs in a goroutine and periodically flushes batches
+// flushLoop runs in a goroutine, the only one that writes the batch: it
+// flushes when the batch is full, periodically, and once more on Stop.
 func (h *PrefixHandler) flushLoop() {
 	defer h.wg.Done()
 	ticker := time.NewTicker(prefixBatchTimeout)
@@ -155,30 +164,45 @@ func (h *PrefixHandler) flushLoop() {
 	for {
 		select {
 		case <-ticker.C:
-			h.mu.Lock()
 			if time.Since(h.lastFlush) >= prefixBatchTimeout {
-				h.flushBatchLocked()
+				h.flushBatch()
 			}
-			h.mu.Unlock()
+		case <-h.batchFullCh:
+			h.flushBatch()
 		case <-h.stopCh:
 			// Final flush
-			h.mu.Lock()
-			h.flushBatchLocked()
-			h.mu.Unlock()
+			h.flushBatch()
 
 			return
 		}
 	}
 }
 
-// flushBatchLocked flushes the prefix batch to the database (must be called with mutex held)
-func (h *PrefixHandler) flushBatchLocked() {
+// takeBatch returns the pending updates and leaves an empty batch in their
+// place for HandleMessage to fill.
+func (h *PrefixHandler) takeBatch() []prefixUpdate {
+	h.mu.Lock()
+	defer h.mu.Unlock()
+
 	if len(h.batch) == 0 {
+		return nil
+	}
+	batch := h.batch
+	h.batch = make([]prefixUpdate, 0, prefixBatchSize)
+
+	return batch
+}
+
+// flushBatch takes the pending batch and writes it to the database, without
+// holding the mutex during the write.
+func (h *PrefixHandler) flushBatch() {
+	batch := h.takeBatch()
+	if len(batch) == 0 {
 		return
 	}
 
 	startTime := time.Now()
-	batchSize := len(h.batch)
+	batchSize := len(batch)
 
 	// For each prefix and peer, keep only the last update the feed delivered.
 	// Updates from different peers for the same prefix are all kept. Arrival
@@ -186,7 +210,7 @@ func (h *PrefixHandler) flushBatchLocked() {
 	// updates within one second carry the same one.
 	type prefixAndPeer struct{ prefix, peer string }
 	lastUpdates := make(map[prefixAndPeer]prefixUpdate)
-	for _, update := range h.batch {
+	for _, update := range batch {
 		lastUpdates[prefixAndPeer{update.prefix, update.peer}] = update
 	}
 
@@ -261,8 +285,6 @@ func (h *PrefixHandler) flushBatchLocked() {
 		"duration_ms", elapsed.Milliseconds(),
 	)
 
-	// Clear batch
-	h.batch = h.batch[:0]
 	h.lastFlush = time.Now()
 }
 

internal/routewatch/prefixhandler_test.go

@@ -30,11 +30,6 @@ func TestPrefixHandlerStoresPrefixesTheIPLookupFinds(t *testing.T) {
 
 	// Built without NewPrefixHandler's flush timer, so the test flushes itself.
 	h := &PrefixHandler{db: db, logger: logger.New()}
-	flush := func() {
-		h.mu.Lock()
-		defer h.mu.Unlock()
-		h.flushBatchLocked()
-	}
 
 	ts := time.Date(2026, 1, 2, 3, 4, 5, 0, time.UTC)
 	h.HandleMessage(&ristypes.RISMessage{
@@ -46,7 +41,7 @@ func TestPrefixHandlerStoresPrefixesTheIPLookupFinds(t *testing.T) {
 			Prefixes: []string{"2001:db8:1::/48", "192.0.2.0/24"},
 		}},
 	})
-	flush()
+	h.flushBatch()
 
 	for ip, want := range map[string]string{
 		"2001:db8:1::1": "2001:db8:1::/48",
@@ -66,7 +61,7 @@ func TestPrefixHandlerStoresPrefixesTheIPLookupFinds(t *testing.T) {
 		ParsedTimestamp: ts.Add(time.Minute),
 		Withdrawals:     []string{"2001:db8:1:0:0:0:0:0/48", "192.0.2.0/24"},
 	})
-	flush()
+	h.flushBatch()
 
 	for _, ip := range []string{"2001:db8:1::1", "192.0.2.1"} {
 		if info, err := db.GetIPInfo(ip); !errors.Is(err, database.ErrNoRoute) {
@@ -164,13 +159,11 @@ func TestPrefixHandlerAppliesEachPeersLastUpdateInABatch(t *testing.T) {
 				for _, msg := range batch {
 					h.HandleMessage(msg)
 				}
-				h.mu.Lock()
-				h.flushBatchLocked()
-				h.mu.Unlock()
+				h.flushBatch()
 			}
 
 			ctx := context.Background()
-			routes, err := db.GetPrefixDetailsContext(ctx, prefix)
+			routes, _, err := db.GetPrefixDetailsContext(ctx, prefix)
 			if err != nil && !errors.Is(err, database.ErrNoRoute) {
 				t.Fatalf("GetPrefixDetailsContext: %v", err)
 			}

internal/server/handlers.go

@@ -201,16 +201,12 @@ func (s *Server) handleStatusJSON() http.HandlerFunc {
 		select {
 		case <-ctx.Done():
 			s.logger.Error("Database stats timeout in status.json")
-			writeJSONError(w, http.StatusGatewayTimeout, requestTimeoutMessage)
+			writeJSONError(w, http.StatusRequestTimeout, "Database timeout")
 
 			return
 		case err := <-errChan:
 			s.logger.Error("Failed to get database stats", "error", err)
-			if deadlinePassed(ctx) {
-				writeJSONError(w, http.StatusGatewayTimeout, requestTimeoutMessage)
-			} else {
-				writeJSONError(w, http.StatusInternalServerError, err.Error())
-			}
+			writeJSONError(w, http.StatusInternalServerError, err.Error())
 
 			return
 		case dbStats = <-statsChan:
@@ -390,7 +386,7 @@ func (s *Server) handleStats() http.HandlerFunc {
 		// Check if context is already cancelled
 		select {
 		case <-ctx.Done():
-			writeJSONError(w, http.StatusGatewayTimeout, requestTimeoutMessage)
+			http.Error(w, "Request timeout", http.StatusRequestTimeout)
 
 			return
 		default:
@@ -419,16 +415,11 @@ func (s *Server) handleStats() http.HandlerFunc {
 		select {
 		case <-ctx.Done():
 			s.logger.Error("Database stats timeout")
-			writeJSONError(w, http.StatusGatewayTimeout, requestTimeoutMessage)
-
+			// Don't write response here - timeout middleware already handles it
 			return
 		case err := <-errChan:
 			s.logger.Error("Failed to get database stats", "error", err)
-			if deadlinePassed(ctx) {
-				writeJSONError(w, http.StatusGatewayTimeout, requestTimeoutMessage)
-			} else {
-				writeJSONError(w, http.StatusInternalServerError, err.Error())
-			}
+			writeJSONError(w, http.StatusInternalServerError, err.Error())
 
 			return
 		case dbStats = <-statsChan:
@@ -631,13 +622,6 @@ func (s *Server) handleIPInfo() http.HandlerFunc {
 			}
 		}
 
-		// The time limit passed while resolving host names.
-		if deadlinePassed(ctx) {
-			writeJSONError(w, http.StatusGatewayTimeout, requestTimeoutMessage)
-
-			return
-		}
-
 		if len(ipsToLookup) == 0 {
 			writeJSONError(w, http.StatusBadRequest, "No valid IPs or hostnames provided")
 
@@ -680,13 +664,6 @@ func (s *Server) handleIPInfo() http.HandlerFunc {
 			}
 		}
 
-		// The time limit passed while looking up the IPs.
-		if deadlinePassed(ctx) {
-			writeJSONError(w, http.StatusGatewayTimeout, requestTimeoutMessage)
-
-			return
-		}
-
 		// Return response (even if no results, include errors)
 		if len(response.Results) == 0 && len(response.Errors) > 0 {
 			writeJSONError(w, http.StatusNotFound, "No routes found: "+response.Errors[0])
@@ -726,12 +703,9 @@ func (s *Server) handleASDetailJSON() http.HandlerFunc {
 
 		asInfo, prefixes, err := s.db.GetASDetailsContext(r.Context(), asn)
 		if err != nil {
-			switch {
-			case errors.Is(err, database.ErrNoRoute):
+			if errors.Is(err, database.ErrNoRoute) {
 				writeJSONError(w, http.StatusNotFound, err.Error())
-			case deadlinePassed(r.Context()):
-				writeJSONError(w, http.StatusGatewayTimeout, requestTimeoutMessage)
-			default:
+			} else {
 				writeJSONError(w, http.StatusInternalServerError, err.Error())
 			}
 
@@ -785,14 +759,11 @@ func (s *Server) handlePrefixDetailJSON() http.HandlerFunc {
 		}
 		prefix := parsed.Masked().String()
 
-		routes, err := s.db.GetPrefixDetailsContext(r.Context(), prefix)
+		routes, _, err := s.db.GetPrefixDetailsContext(r.Context(), prefix)
 		if err != nil {
-			switch {
-			case errors.Is(err, database.ErrNoRoute):
+			if errors.Is(err, database.ErrNoRoute) {
 				writeJSONError(w, http.StatusNotFound, err.Error())
-			case deadlinePassed(r.Context()):
-				writeJSONError(w, http.StatusGatewayTimeout, requestTimeoutMessage)
-			default:
+			} else {
 				writeJSONError(w, http.StatusInternalServerError, err.Error())
 			}
 
@@ -832,12 +803,9 @@ func (s *Server) handleASDetail() http.HandlerFunc {
 
 		asInfo, prefixes, err := s.db.GetASDetailsContext(r.Context(), asn)
 		if err != nil {
-			switch {
-			case errors.Is(err, database.ErrNoRoute):
+			if errors.Is(err, database.ErrNoRoute) {
 				http.Error(w, "AS not found", http.StatusNotFound)
-			case deadlinePassed(r.Context()):
-				http.Error(w, requestTimeoutMessage, http.StatusGatewayTimeout)
-			default:
+			} else {
 				s.logger.Error("Failed to get AS details", "error", err)
 				http.Error(w, "Internal server error", http.StatusInternalServerError)
 			}
@@ -962,14 +930,11 @@ func (s *Server) handlePrefixDetail() http.HandlerFunc {
 		}
 		prefix := parsed.Masked().String()
 
-		routes, err := s.db.GetPrefixDetailsContext(r.Context(), prefix)
+		routes, originASNs, err := s.db.GetPrefixDetailsContext(r.Context(), prefix)
 		if err != nil {
-			switch {
-			case errors.Is(err, database.ErrNoRoute):
+			if errors.Is(err, database.ErrNoRoute) {
 				http.Error(w, "Prefix not found", http.StatusNotFound)
-			case deadlinePassed(r.Context()):
-				http.Error(w, requestTimeoutMessage, http.StatusGatewayTimeout)
-			default:
+			} else {
 				s.logger.Error("Failed to get prefix details", "error", err)
 				http.Error(w, "Internal server error", http.StatusInternalServerError)
 			}
@@ -987,18 +952,10 @@ func (s *Server) handlePrefixDetail() http.HandlerFunc {
 		originMap := make(map[int]*ASNInfo)
 		for _, route := range routes {
 			if _, exists := originMap[route.OriginASN]; !exists {
-				// Get AS info from database
-				asInfo, _, _ := s.db.GetASDetailsContext(r.Context(), route.OriginASN)
-				handle := ""
-				description := ""
-				if asInfo != nil {
-					handle = asInfo.Handle
-					description = asInfo.Description
-				}
 				originMap[route.OriginASN] = &ASNInfo{
 					ASN:         route.OriginASN,
-					Handle:      handle,
-					Description: description,
+					Handle:      originASNs[route.OriginASN].Handle,
+					Description: originASNs[route.OriginASN].Description,
 					PeerCount:   0,
 				}
 			}
@@ -1123,12 +1080,8 @@ func (s *Server) handlePrefixLength() http.HandlerFunc {
 		const maxPrefixes = 500
 		prefixes, err := s.db.GetRandomPrefixesByLengthContext(r.Context(), maskLength, ipVersion, maxPrefixes)
 		if err != nil {
-			if deadlinePassed(r.Context()) {
-				http.Error(w, requestTimeoutMessage, http.StatusGatewayTimeout)
-			} else {
-				s.logger.Error("Failed to get prefixes by length", "error", err)
-				http.Error(w, "Internal server error", http.StatusInternalServerError)
-			}
+			s.logger.Error("Failed to get prefixes by length", "error", err)
+			http.Error(w, "Internal server error", http.StatusInternalServerError)
 
 			return
 		}
@@ -1218,12 +1171,8 @@ func (s *Server) handlePrefixLength6() http.HandlerFunc {
 		const maxPrefixes = 500
 		prefixes, err := s.db.GetRandomPrefixesByLengthContext(r.Context(), maskLength, ipVersion, maxPrefixes)
 		if err != nil {
-			if deadlinePassed(r.Context()) {
-				http.Error(w, requestTimeoutMessage, http.StatusGatewayTimeout)
-			} else {
-				s.logger.Error("Failed to get prefixes by length", "error", err)
-				http.Error(w, "Internal server error", http.StatusInternalServerError)
-			}
+			s.logger.Error("Failed to get prefixes by length", "error", err)
+			http.Error(w, "Internal server error", http.StatusInternalServerError)
 
 			return
 		}

internal/server/handlers_test.go

@@ -3,10 +3,13 @@ package server
 import (
 	"context"
 	"encoding/json"
+	"errors"
+	"html"
 	"net/http"
 	"net/http/httptest"
 	"runtime"
 	"slices"
+	"strings"
 	"testing"
 	"time"
 
@@ -15,6 +18,7 @@ import (
 	"git.eeqj.de/sneak/routewatch/internal/logger"
 	"git.eeqj.de/sneak/routewatch/internal/metrics"
 	"git.eeqj.de/sneak/routewatch/internal/streamer"
+	"git.eeqj.de/sneak/routewatch/pkg/asinfo"
 	"github.com/google/uuid"
 )
 
@@ -200,176 +204,69 @@ func TestPrefixDetailHandlersParsePrefix(t *testing.T) {
 	}
 }
 
-// shortRequestDeadline is the deadline the tests below give a request. The
-// server's 30-second limit and the stats handlers' 4-second limit inherit it,
-// so the tests do not wait for either.
-const shortRequestDeadline = 50 * time.Millisecond
-
-// TestRequestPastTimeLimitAnswers504 sends a request through the server's
-// router to a page and to a JSON route whose handlers wait for the time limit
-// to pass and return without answering. The page answers 504; the JSON route
-// answers 504 with the JSON error body. Before the fix both answered 408,
-// written by the time limit middleware from its own goroutine while the
-// handler could still be writing.
-func TestRequestPastTimeLimitAnswers504(t *testing.T) {
-	s := New(nil, streamer.New(logger.New(), metrics.New()), logger.New(), &config.Config{})
-
-	waitForTimeLimit := func(_ http.ResponseWriter, r *http.Request) {
-		<-r.Context().Done()
-	}
-	// Registered the way setupRoutes registers pages and JSON routes.
-	s.router.Get("/slow-page", waitForTimeLimit)
-	s.router.Get("/slow.json", JSONValidationMiddleware(http.HandlerFunc(waitForTimeLimit)).ServeHTTP)
-
-	tests := []struct {
-		path         string
-		wantJSONBody bool
-	}{
-		{path: "/slow-page"},
-		{path: "/slow.json", wantJSONBody: true},
-	}
-
-	for _, tt := range tests {
-		ctx, cancel := context.WithTimeout(context.Background(), shortRequestDeadline)
-		rec := httptest.NewRecorder()
-		s.router.ServeHTTP(rec, httptest.NewRequest(http.MethodGet, tt.path, nil).WithContext(ctx))
-		cancel()
-
-		if rec.Code != http.StatusGatewayTimeout {
-			t.Errorf("%s: status %d, want %d; body %s", tt.path, rec.Code, http.StatusGatewayTimeout, rec.Body)
-		}
-		if tt.wantJSONBody {
-			checkJSONErrorCode(t, tt.path, rec, http.StatusGatewayTimeout)
-		}
-	}
-}
-
-// TestStatsHandlersAnswer504WhenDatabaseReadRunsOut calls each stats handler
-// with a store that does not answer before the handler's 4-second limit runs
-// out, and checks that the handler itself answers 504 with the JSON error
-// body. Before the fix status.json answered 408, and /api/v1/stats wrote
-// nothing, which the JSON check on its route turned into 500.
-func TestStatsHandlersAnswer504WhenDatabaseReadRunsOut(t *testing.T) {
-	release := make(chan struct{})
-	defer close(release)
-	db := blockingStatsDB{release: release}
-	s := New(db, streamer.New(logger.New(), metrics.New()), logger.New(), &config.Config{})
-
-	handlers := map[string]http.HandlerFunc{
-		"status.json": s.handleStatusJSON(),
-		"stats":       s.handleStats(),
-	}
-
-	for name, handler := range handlers {
-		ctx, cancel := context.WithTimeout(context.Background(), shortRequestDeadline)
-		rec := httptest.NewRecorder()
-		handler(rec, httptest.NewRequest(http.MethodGet, "/", nil).WithContext(ctx))
-		cancel()
-
-		if rec.Code != http.StatusGatewayTimeout {
-			t.Errorf("%s: status %d, want %d; body %s", name, rec.Code, http.StatusGatewayTimeout, rec.Body)
-		}
-		checkJSONErrorCode(t, name, rec, http.StatusGatewayTimeout)
-	}
-}
-
-// slowDB embeds database.Store (left nil) and overrides the reads the routes
-// in TestRoutesAnswer504WhenDatabaseReadIsCutOff make. Each read waits until
-// its context ends and returns the context's error, as a slow database read
-// cut off by a time limit does.
-type slowDB struct {
+// failingASDetailsDB wraps a real store and fails every AS details lookup.
+type failingASDetailsDB struct {
 	database.Store
 }
 
-func (slowDB) GetStatsContext(ctx context.Context) (database.Stats, error) {
-	<-ctx.Done()
-
-	return database.Stats{}, ctx.Err()
+func (failingASDetailsDB) GetASDetailsContext(_ context.Context, _ int) (*database.ASN, []database.LiveRoute, error) {
+	return nil, nil, errors.New("AS details lookup failed")
 }
 
-func (slowDB) GetIPInfoContext(ctx context.Context, _ string) (*database.IPInfo, error) {
-	<-ctx.Done()
-
-	return nil, ctx.Err()
-}
-
-func (slowDB) GetASDetailsContext(ctx context.Context, _ int) (*database.ASN, []database.LiveRoute, error) {
-	<-ctx.Done()
-
-	return nil, nil, ctx.Err()
-}
-
-func (slowDB) GetPrefixDetailsContext(ctx context.Context, _ string) ([]database.LiveRoute, error) {
-	<-ctx.Done()
-
-	return nil, ctx.Err()
-}
-
-func (slowDB) GetRandomPrefixesByLengthContext(ctx context.Context, _, _, _ int) ([]database.LiveRoute, error) {
-	<-ctx.Done()
-
-	return nil, ctx.Err()
-}
-
-// TestRoutesAnswer504WhenDatabaseReadIsCutOff sends a request through the
-// server's router for each route that reads the database, with a store whose
-// reads fail when the request's time limit passes. Each route answers 504, the
-// JSON routes with the JSON error body. Before the fix they answered 408 or,
-// when the handler wrote first, its own error: 500, or 404 on the IP lookups.
-// The health check is left out: it answers 503 when its own 2-second ping runs
-// out.
-func TestRoutesAnswer504WhenDatabaseReadIsCutOff(t *testing.T) {
-	s := New(slowDB{}, streamer.New(logger.New(), metrics.New()), logger.New(), &config.Config{})
-
-	tests := []struct {
-		path         string
-		wantJSONBody bool
-	}{
-		{path: "/as/64500"},
-		{path: "/prefix/192.0.2.0/24"},
-		{path: "/prefixlength/24"},
-		{path: "/prefixlength6/48"},
-		{path: "/status.json", wantJSONBody: true},
-		{path: "/ip/192.0.2.1", wantJSONBody: true},
-		{path: "/api/v1/stats", wantJSONBody: true},
-		{path: "/api/v1/ip/192.0.2.1", wantJSONBody: true},
-		{path: "/api/v1/as/64500", wantJSONBody: true},
-		{path: "/api/v1/prefix/192.0.2.0/24", wantJSONBody: true},
+// TestPrefixDetailShowsOriginNames checks that the prefix page shows each
+// origin AS's handle and description without looking up the AS's details,
+// which also read every route the AS originates. Before the fix the page did
+// that lookup once per origin, so with it failing the names were missing
+// (https://git.eeqj.de/sneak/routewatch/issues/67). The AS path column shows
+// handles too, so the test looks for the origin list's "(handle)" form.
+func TestPrefixDetailShowsOriginNames(t *testing.T) {
+	db, err := database.New(&config.Config{StateDir: t.TempDir()}, logger.New())
+	if err != nil {
+		t.Fatalf("database.New: %v", err)
 	}
+	t.Cleanup(func() { _ = db.Close() })
 
-	for _, tt := range tests {
-		ctx, cancel := context.WithTimeout(context.Background(), shortRequestDeadline)
-		rec := httptest.NewRecorder()
-		s.router.ServeHTTP(rec, httptest.NewRequest(http.MethodGet, tt.path, nil).WithContext(ctx))
-		cancel()
-
-		if rec.Code != http.StatusGatewayTimeout {
-			t.Errorf("%s: status %d, want %d; body %s", tt.path, rec.Code, http.StatusGatewayTimeout, rec.Body)
-		}
-		if tt.wantJSONBody {
-			checkJSONErrorCode(t, tt.path, rec, http.StatusGatewayTimeout)
+	ts := time.Date(2026, 1, 2, 3, 4, 5, 0, time.UTC)
+	origins := []int{15169, 13335}
+	for _, asn := range origins {
+		if _, err := db.GetOrCreateASN(asn, ts); err != nil {
+			t.Fatalf("GetOrCreateASN(%d): %v", asn, err)
 		}
 	}
-}
-
-// checkJSONErrorCode checks that rec holds the JSON error body with the given
-// code.
-func checkJSONErrorCode(t *testing.T, name string, rec *httptest.ResponseRecorder, want int) {
-	t.Helper()
-
-	var body struct {
-		Status string `json:"status"`
-		Error  struct {
-			Code int `json:"code"`
-		} `json:"error"`
+	if err := db.UpsertLiveRouteBatch([]*database.LiveRoute{
+		{
+			ID: uuid.New(), Prefix: "192.0.2.0/24", MaskLength: 24, IPVersion: 4,
+			OriginASN: origins[0], PeerIP: "198.51.100.1", ASPath: []int{origins[0]}, NextHop: "198.51.100.1",
+			LastUpdated: ts,
+		},
+		{
+			ID: uuid.New(), Prefix: "192.0.2.0/24", MaskLength: 24, IPVersion: 4,
+			OriginASN: origins[1], PeerIP: "198.51.100.2", ASPath: []int{origins[1]}, NextHop: "198.51.100.2",
+			LastUpdated: ts,
+		},
+	}); err != nil {
+		t.Fatalf("UpsertLiveRouteBatch: %v", err)
 	}
-	if err := json.Unmarshal(rec.Body.Bytes(), &body); err != nil {
-		t.Errorf("%s: decoding the answer %q: %v", name, rec.Body, err)
 
-		return
+	s := New(failingASDetailsDB{db}, streamer.New(logger.New(), metrics.New()), logger.New(), &config.Config{})
+	rec := httptest.NewRecorder()
+	s.router.ServeHTTP(rec, httptest.NewRequest(http.MethodGet, "/prefix/192.0.2.0/24", nil))
+	if rec.Code != http.StatusOK {
+		t.Fatalf("status %d, want %d; body %s", rec.Code, http.StatusOK, rec.Body)
 	}
-	if body.Status != "error" || body.Error.Code != want {
-		t.Errorf("%s: answer %s, want status \"error\" and error code %d", name, rec.Body, want)
+
+	page := rec.Body.String()
+	for _, asn := range origins {
+		info, ok := asinfo.Get(asn)
+		if !ok {
+			t.Fatalf("AS%d is not in the AS info data", asn)
+		}
+		if want := "(" + html.EscapeString(info.Handle) + ")"; !strings.Contains(page, want) {
+			t.Errorf("page does not show AS%d's handle %q", asn, want)
+		}
+		if want := html.EscapeString(info.Description); !strings.Contains(page, want) {
+			t.Errorf("page does not show AS%d's description %q", asn, want)
+		}
 	}
 }
 

internal/server/middleware.go

@@ -4,7 +4,6 @@ import (
 	"bytes"
 	"context"
 	"encoding/json"
-	"errors"
 	"fmt"
 	"log/slog"
 	"net/http"
@@ -110,24 +109,142 @@ func JSONResponseMiddleware(next http.Handler) http.Handler {
 	})
 }
 
-// requestTimeoutMessage is the error message sent with 504 Gateway Timeout.
-const requestTimeoutMessage = "Request timeout"
+// timeoutWriter wraps ResponseWriter to prevent concurrent writes after timeout
+type timeoutWriter struct {
+	http.ResponseWriter
+	mu      sync.Mutex
+	written bool
+	header  http.Header // cached header to prevent concurrent access
+}
 
-// deadlinePassed reports whether ctx ended because its deadline passed. When
-// a handler's database read or other lookup fails, it uses this to tell a
-// request cut off by its time limit, which answers 504, from other failures.
-func deadlinePassed(ctx context.Context) bool {
-	return errors.Is(ctx.Err(), context.DeadlineExceeded)
+func (tw *timeoutWriter) Write(b []byte) (int, error) {
+	tw.mu.Lock()
+	defer tw.mu.Unlock()
+
+	if tw.written {
+		return 0, nil // Discard writes after timeout
+	}
+
+	return tw.ResponseWriter.Write(b)
+}
+
+func (tw *timeoutWriter) WriteHeader(statusCode int) {
+	tw.mu.Lock()
+	defer tw.mu.Unlock()
+
+	if tw.written {
+		return // Discard writes after timeout
+	}
+
+	tw.ResponseWriter.WriteHeader(statusCode)
+}
+
+func (tw *timeoutWriter) Header() http.Header {
+	tw.mu.Lock()
+	defer tw.mu.Unlock()
+
+	if tw.written {
+		// Return a copy to prevent modifications after timeout
+		if tw.header == nil {
+			tw.header = make(http.Header)
+		}
+
+		return tw.header
+	}
+
+	return tw.ResponseWriter.Header()
+}
+
+func (tw *timeoutWriter) markWritten() {
+	tw.mu.Lock()
+	defer tw.mu.Unlock()
+	tw.written = true
+}
+
+// TimeoutMiddleware creates an HTTP middleware that enforces a request timeout.
+// If the handler does not complete within the specified duration, the middleware
+// returns a JSON error response with HTTP status 408 (Request Timeout).
+//
+// The timeout parameter specifies the maximum duration allowed for request processing.
+// The returned middleware handles panics from the wrapped handler by re-panicking
+// after cleanup, and prevents concurrent writes to the response after timeout occurs.
+func TimeoutMiddleware(timeout time.Duration, logger *slog.Logger) func(http.Handler) http.Handler {
+	return func(next http.Handler) http.Handler {
+		return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+			startTime := time.Now()
+
+			ctx, cancel := context.WithTimeout(r.Context(), timeout)
+			defer cancel()
+
+			tw := &timeoutWriter{
+				ResponseWriter: w,
+				header:         make(http.Header),
+			}
+
+			done := make(chan struct{})
+			panicChan := make(chan interface{}, 1)
+
+			go func() {
+				defer func() {
+					if p := recover(); p != nil {
+						panicChan <- p
+					}
+				}()
+
+				next.ServeHTTP(tw, r.WithContext(ctx))
+				close(done)
+			}()
+
+			select {
+			case p := <-panicChan:
+				panic(p)
+			case <-done:
+				return
+			case <-ctx.Done():
+				tw.markWritten() // Prevent the handler from writing after timeout
+				execTime := time.Since(startTime)
+
+				// Log the timeout as a warning
+				logger.Warn("Request timeout",
+					"method", r.Method,
+					"path", r.URL.Path,
+					"duration_ms", execTime.Milliseconds(),
+					"remote_addr", r.RemoteAddr,
+				)
+
+				// Write directly to the underlying writer since we've marked tw as written
+				// This is safe because markWritten() prevents the handler from writing
+				tw.mu.Lock()
+				w.Header().Set("Content-Type", "application/json")
+				w.WriteHeader(http.StatusRequestTimeout)
+				tw.mu.Unlock()
+
+				response := map[string]interface{}{
+					"status": "error",
+					"error": map[string]interface{}{
+						"msg":  "Request timeout",
+						"code": http.StatusRequestTimeout,
+					},
+					"@meta": map[string]interface{}{
+						"time_zone":      "UTC",
+						"api_version":    1,
+						"execution_time": fmt.Sprintf("%d ms", execTime.Milliseconds()),
+					},
+				}
+
+				_ = json.NewEncoder(w).Encode(response)
+			}
+		})
+	}
 }
 
 // JSONValidationMiddleware is an HTTP middleware that validates JSON API responses.
 // It ensures that responses with Content-Type "application/json" contain valid JSON.
 //
 // If a response is not valid JSON or is empty when JSON is expected, the middleware
-// returns a properly formatted JSON error response. If the request's time limit
-// has passed, it answers 504 with the error message "Request timeout". For other
-// errors, it returns "Internal server error" with status 500 if the original
-// status was 200.
+// returns a properly formatted JSON error response. For timeout errors (status 408),
+// the error message will be "Request timeout". For other errors, it returns
+// "Internal server error" with status 500 if the original status was 200.
 //
 // Non-JSON responses are passed through unchanged.
 func JSONValidationMiddleware(next http.Handler) http.Handler {
@@ -176,14 +293,11 @@ func JSONValidationMiddleware(next http.Handler) http.Handler {
 		if statusCode == http.StatusOK {
 			statusCode = http.StatusInternalServerError
 		}
-		if deadlinePassed(r.Context()) {
-			statusCode = http.StatusGatewayTimeout
-		}
 		w.WriteHeader(statusCode)
 
 		errorMsg := "Internal server error"
-		if statusCode == http.StatusGatewayTimeout {
-			errorMsg = requestTimeoutMessage
+		if statusCode == http.StatusRequestTimeout {
+			errorMsg = "Request timeout"
 		}
 
 		response := map[string]interface{}{

internal/server/routes.go

@@ -16,12 +16,9 @@ func (s *Server) setupRoutes() {
 	r.Use(middleware.RealIP)
 	r.Use(RequestLoggerMiddleware(s.logger.Logger)) // Structured request logging
 	r.Use(middleware.Recoverer)
-	r.Use(JSONResponseMiddleware)
-	// Timeout must come after JSONResponseMiddleware, which sends its answer
-	// when the handler returns and would send a 200 ahead of Timeout's 504 for
-	// a handler that wrote nothing.
 	const requestTimeout = 30 * time.Second // Increased from 8s for slow queries
-	r.Use(middleware.Timeout(requestTimeout))
+	r.Use(TimeoutMiddleware(requestTimeout, s.logger.Logger))
+	r.Use(JSONResponseMiddleware)
 
 	// Routes
 	r.Get("/", s.handleIndex())

internal/server/server.go

@@ -3,6 +3,8 @@ package server
 
 import (
 	"context"
+	"fmt"
+	"net"
 	"net/http"
 	"strconv"
 	"time"
@@ -53,9 +55,12 @@ func New(db database.Store, streamer *streamer.Streamer, logger *logger.Logger,
 	return s
 }
 
-// Start starts the HTTP server
+// Start listens on the configured port and serves HTTP in the background.
+// It returns an error if it cannot listen, for example because the port is
+// already in use.
 func (s *Server) Start() error {
 	const (
+		network           = "tcp"
 		readHeaderTimeout = 40 * time.Second
 		readTimeout       = 60 * time.Second
 		writeTimeout      = 60 * time.Second
@@ -73,10 +78,15 @@ func (s *Server) Start() error {
 
 	s.logger.Info("Starting HTTP server", "port", s.port, "addr", s.srv.Addr)
 
-	// Start in goroutine but log when actually listening
+	listener, err := net.Listen(network, s.srv.Addr)
+	if err != nil {
+		return fmt.Errorf("starting HTTP server: %w", err)
+	}
+
+	s.logger.Info("HTTP server listening", "addr", listener.Addr().String())
+
 	go func() {
-		s.logger.Info("HTTP server listening", "addr", s.srv.Addr)
-		if err := s.srv.ListenAndServe(); err != nil && err != http.ErrServerClosed {
+		if err := s.srv.Serve(listener); err != nil && err != http.ErrServerClosed {
 			s.logger.Error("HTTP server error", "error", err)
 		}
 	}()

internal/server/server_test.go

@@ -0,0 +1,33 @@
+package server
+
+import (
+	"context"
+	"net"
+	"testing"
+
+	"git.eeqj.de/sneak/routewatch/internal/config"
+	"git.eeqj.de/sneak/routewatch/internal/logger"
+	"git.eeqj.de/sneak/routewatch/internal/metrics"
+	"git.eeqj.de/sneak/routewatch/internal/streamer"
+)
+
+// TestStartFailsWhenPortIsHeld holds a port with a listener of its own and
+// checks that Start on that port returns an error. Before the fix Start
+// listened in a goroutine, only logged the failure and returned nil, so the
+// daemon kept running without its web server.
+func TestStartFailsWhenPortIsHeld(t *testing.T) {
+	held, err := net.Listen("tcp", ":0")
+	if err != nil {
+		t.Fatalf("failed to open the test listener: %v", err)
+	}
+	defer func() { _ = held.Close() }()
+
+	port := held.Addr().(*net.TCPAddr).Port
+	log := logger.New()
+	s := New(nil, streamer.New(log, metrics.New()), log, &config.Config{Port: port})
+	defer func() { _ = s.Stop(context.Background()) }()
+
+	if err := s.Start(); err == nil {
+		t.Fatalf("Start returned nil while port %d was held by another listener", port)
+	}
+}

internal/streamer/streamer.go

@@ -7,6 +7,7 @@ import (
 	"compress/gzip"
 	"context"
 	"encoding/json"
+	"errors"
 	"fmt"
 	"io"
 	"math"
@@ -48,6 +49,7 @@ const (
 	metricsUpdateRate     = time.Second
 	minBackoffDelay       = 5 * time.Second
 	maxBackoffDelay       = 320 * time.Second
+	streamIdleTimeout     = 60 * time.Second // Reconnect when no line arrives for this long
 	metricsLogInterval    = 10 * time.Second
 	bytesPerKB            = 1024
 	bytesPerMB            = 1024 * 1024
@@ -58,6 +60,9 @@ const (
 	backpressureSlope     = 2.0 // Slope for linear drop probability increase
 )
 
+// errStreamEnded is returned by stream when RIS Live ends the response.
+var errStreamEnded = errors.New("RIS Live ended the stream")
+
 // MessageHandler defines the interface for processing RIS messages.
 // Implementations must specify which message types they want to receive,
 // how to process messages, and their desired queue capacity.
@@ -107,6 +112,8 @@ type Streamer struct {
 	logger       *logger.Logger
 	client       *http.Client
 	url          string
+	idleTimeout  time.Duration // Drop the connection when no line arrives for this long
+	minBackoff   time.Duration // First wait before reconnecting; doubles up to maxBackoffDelay
 	handlers     []*handlerInfo
 	rawHandler   RawMessageHandler
 	mu           sync.RWMutex
@@ -124,8 +131,10 @@ type Streamer struct {
 // The metrics tracker is used to record message counts, bytes received, and connection status.
 func New(logger *logger.Logger, metrics *metrics.Tracker) *Streamer {
 	return &Streamer{
-		logger: logger,
-		url:    risLiveURL,
+		logger:      logger,
+		url:         risLiveURL,
+		idleTimeout: streamIdleTimeout,
+		minBackoff:  minBackoffDelay,
 		client: &http.Client{
 			Timeout: 0, // No timeout for streaming
 			Transport: &http.Transport{
@@ -405,7 +414,7 @@ func (s *Streamer) updateMetrics(messageBytes int) {
 
 // streamWithReconnect handles streaming with automatic reconnection and exponential backoff
 func (s *Streamer) streamWithReconnect(ctx context.Context) {
-	backoffDelay := minBackoffDelay
+	backoffDelay := s.minBackoff
 	consecutiveFailures := 0
 
 	for {
@@ -422,8 +431,9 @@ func (s *Streamer) streamWithReconnect(ctx context.Context) {
 		err := s.stream(ctx)
 		streamDuration := time.Since(startTime)
 
-		if err == nil {
-			// Clean exit (context cancelled)
+		// Only Stop ends the streamer. A stream that ends any other way,
+		// with or without an error, is a disconnect and is reconnected.
+		if ctx.Err() != nil {
 			return
 		}
 
@@ -434,17 +444,13 @@ func (s *Streamer) streamWithReconnect(ctx context.Context) {
 			"stream_duration", streamDuration)
 		s.metrics.SetConnected(false)
 
-		// Check if context is cancelled
-		if ctx.Err() != nil {
-			return
-		}
-
-		// If we streamed for more than 30 seconds, reset the backoff
-		// This indicates we had a successful connection that received data
+		// A stream that lasted more than 30 seconds resets the backoff. That
+		// includes a stream dropped after streamIdleTimeout with no line, so
+		// a silent feed is retried after the first backoff delay every time.
 		if streamDuration > 30*time.Second {
 			s.logger.Info("Resetting backoff delay due to successful connection",
 				"stream_duration", streamDuration)
-			backoffDelay = minBackoffDelay
+			backoffDelay = s.minBackoff
 			consecutiveFailures = 0
 		} else {
 			// Increment consecutive failures
@@ -477,7 +483,13 @@ func (s *Streamer) stream(ctx context.Context) error {
 	connCtx, connCancel := context.WithCancel(ctx)
 	defer connCancel()
 
-	req, err := http.NewRequestWithContext(ctx, "GET", s.url, nil)
+	// The idle timer drops the connection, by cancelling connCtx, when no
+	// line arrives for s.idleTimeout. Each line read starts it over. It
+	// also covers the wait for the server to answer.
+	idleTimer := time.AfterFunc(s.idleTimeout, connCancel)
+	defer idleTimer.Stop()
+
+	req, err := http.NewRequestWithContext(connCtx, "GET", s.url, nil)
 	if err != nil {
 		return fmt.Errorf("failed to create request: %w", err)
 	}
@@ -559,6 +571,8 @@ func (s *Streamer) stream(ctx context.Context) error {
 	scanner := bufio.NewScanner(reader)
 
 	for scanner.Scan() {
+		idleTimer.Reset(s.idleTimeout)
+
 		select {
 		case <-ctx.Done():
 			s.logger.Info("Stream stopped by context")
@@ -707,11 +721,19 @@ func (s *Streamer) stream(ctx context.Context) error {
 		s.mu.RUnlock()
 	}
 
+	if ctx.Err() != nil {
+		return ctx.Err()
+	}
+
+	if connCtx.Err() != nil {
+		return fmt.Errorf("no line received for %s", s.idleTimeout)
+	}
+
 	if err := scanner.Err(); err != nil {
 		return fmt.Errorf("scanner error: %w", err)
 	}
 
-	return nil
+	return errStreamEnded
 }
 
 // shouldDropForBackpressure determines if a message should be dropped based on queue utilization

internal/streamer/streamer_test.go

@@ -7,6 +7,7 @@ import (
 	"net/http"
 	"net/http/httptest"
 	"runtime"
+	"sync/atomic"
 	"testing"
 	"time"
 
@@ -39,6 +40,14 @@ func TestNewStreamer(t *testing.T) {
 	if s.metrics != metricsTracker {
 		t.Error("metrics tracker not set correctly")
 	}
+
+	if s.idleTimeout != streamIdleTimeout {
+		t.Errorf("idleTimeout = %s, want %s", s.idleTimeout, streamIdleTimeout)
+	}
+
+	if s.minBackoff != minBackoffDelay {
+		t.Errorf("minBackoff = %s, want %s", s.minBackoff, minBackoffDelay)
+	}
 }
 
 // TestStreamDoesNotLeakTickersAcrossReconnects drives many short-lived
@@ -57,8 +66,8 @@ func TestStreamDoesNotLeakTickersAcrossReconnects(t *testing.T) {
 
 	// One warm-up connection so any persistent HTTP transport goroutine exists
 	// before we take the baseline.
-	if err := s.stream(context.Background()); err != nil {
-		t.Fatalf("warm-up stream returned error: %v", err)
+	if err := s.stream(context.Background()); !errors.Is(err, errStreamEnded) {
+		t.Fatalf("warm-up stream returned %v, want %v", err, errStreamEnded)
 	}
 	s.client.CloseIdleConnections()
 
@@ -66,8 +75,8 @@ func TestStreamDoesNotLeakTickersAcrossReconnects(t *testing.T) {
 
 	const reconnects = 20
 	for range reconnects {
-		if err := s.stream(context.Background()); err != nil {
-			t.Fatalf("stream returned error: %v", err)
+		if err := s.stream(context.Background()); !errors.Is(err, errStreamEnded) {
+			t.Fatalf("stream returned %v, want %v", err, errStreamEnded)
 		}
 	}
 	s.client.CloseIdleConnections()
@@ -78,23 +87,35 @@ func TestStreamDoesNotLeakTickersAcrossReconnects(t *testing.T) {
 	}
 }
 
-// updateHandler wants UPDATE messages and does nothing with them.
-type updateHandler struct{}
+// updateLine is one UPDATE message as RIS Live sends it.
+const updateLine = `{"type":"ris_message","data":{"type":"UPDATE","peer":"192.0.2.1",` +
+	`"peer_asn":"64496","timestamp":1700000000}}` + "\n"
+
+// updateHandler wants UPDATE messages. For each one it handles it sends on
+// handled if there is room, and otherwise does nothing; a nil handled is
+// never sent on.
+type updateHandler struct {
+	handled chan struct{}
+}
 
 func (updateHandler) WantsMessage(messageType string) bool { return messageType == "UPDATE" }
-func (updateHandler) HandleMessage(*ristypes.RISMessage)   {}
 func (updateHandler) QueueCapacity() int                   { return 10 }
 
+func (h updateHandler) HandleMessage(*ristypes.RISMessage) {
+	select {
+	case h.handled <- struct{}{}:
+	default:
+	}
+}
+
 // TestStopBeforeMessageReachesQueues stops the streamer after the read loop
 // has checked for cancellation but before it hands the message to the handler
 // queues. That is the gap a stop from another goroutine can land in, and it
 // used to end in "send on closed channel". The raw handler runs in that gap on
 // the read loop itself, so calling Stop from it hits the gap every time.
 func TestStopBeforeMessageReachesQueues(t *testing.T) {
-	const line = `{"type":"ris_message","data":{"type":"UPDATE","peer":"192.0.2.1",` +
-		`"peer_asn":"64496","timestamp":1700000000}}` + "\n"
 	srv := httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, _ *http.Request) {
-		_, _ = io.WriteString(w, line)
+		_, _ = io.WriteString(w, updateLine)
 	}))
 	defer srv.Close()
 
@@ -117,6 +138,117 @@ func TestStopBeforeMessageReachesQueues(t *testing.T) {
 	s.Stop()
 }
 
+// TestReconnectWhenStreamEnds has the server end the first response
+// normally, as when RIS Live restarts. The streamer must treat that as a
+// disconnect and connect again.
+func TestReconnectWhenStreamEnds(t *testing.T) {
+	endResponse := func(http.ResponseWriter, *http.Request) {}
+	checkReconnect(t, endResponse, streamIdleTimeout)
+}
+
+// TestReconnectWhenStreamGoesIdle has the server hold the first response
+// open without sending anything. The streamer must drop it once the idle
+// timeout passes and connect again.
+func TestReconnectWhenStreamGoesIdle(t *testing.T) {
+	const idleTimeout = 50 * time.Millisecond
+	holdResponse := func(w http.ResponseWriter, r *http.Request) {
+		w.(http.Flusher).Flush()
+		<-r.Context().Done()
+	}
+	checkReconnect(t, holdResponse, idleTimeout)
+}
+
+// TestReconnectWhenServerNeverAnswers has the server accept the first
+// request and never answer it, not even with headers. The streamer must give
+// up on it once the idle timeout passes and connect again.
+func TestReconnectWhenServerNeverAnswers(t *testing.T) {
+	const idleTimeout = 50 * time.Millisecond
+	neverAnswer := func(_ http.ResponseWriter, r *http.Request) {
+		<-r.Context().Done()
+	}
+	checkReconnect(t, neverAnswer, idleTimeout)
+}
+
+// TestStreamNotDroppedWhileLinesArrive has the server send lines well within
+// the idle timeout for several times the timeout, then end the response. Each
+// line must start the idle timeout over, so the stream lasts until the server
+// ends it instead of being dropped as idle.
+func TestStreamNotDroppedWhileLinesArrive(t *testing.T) {
+	const (
+		idleTimeout  = 100 * time.Millisecond
+		lineInterval = idleTimeout / 10
+		sendFor      = 5 * idleTimeout
+	)
+	srv := httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, _ *http.Request) {
+		deadline := time.Now().Add(sendFor)
+		for time.Now().Before(deadline) {
+			_, _ = io.WriteString(w, updateLine)
+			w.(http.Flusher).Flush()
+			time.Sleep(lineInterval)
+		}
+	}))
+	defer srv.Close()
+
+	s := New(logger.New(), metrics.New())
+	s.url = srv.URL
+	s.idleTimeout = idleTimeout
+
+	if err := s.stream(context.Background()); !errors.Is(err, errStreamEnded) {
+		t.Fatalf("stream returned %v, want %v", err, errStreamEnded)
+	}
+}
+
+// checkReconnect runs a streamer against a fake RIS Live server. The first
+// response is served by firstResponse; every later one carries one UPDATE
+// line and then stays open. The streamer must come back for a second
+// response, must not be marked connected when it does, and must handle the
+// UPDATE in it.
+func checkReconnect(t *testing.T, firstResponse http.HandlerFunc, idleTimeout time.Duration) {
+	t.Helper()
+
+	const maxWait = 5 * time.Second
+
+	tracker := metrics.New()
+	connectedAtReconnect := make(chan bool, 1)
+	var requests atomic.Int32
+	srv := httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		if requests.Add(1) == 1 {
+			firstResponse(w, r)
+
+			return
+		}
+		select {
+		case connectedAtReconnect <- tracker.IsConnected():
+		default:
+		}
+		_, _ = io.WriteString(w, updateLine)
+		w.(http.Flusher).Flush()
+		<-r.Context().Done()
+	}))
+	defer srv.Close()
+
+	s := New(logger.New(), tracker)
+	s.url = srv.URL
+	s.idleTimeout = idleTimeout
+	s.minBackoff = time.Millisecond
+	handler := updateHandler{handled: make(chan struct{}, 1)}
+	s.RegisterHandler(handler)
+	if err := s.Start(); err != nil {
+		t.Fatalf("Start returned error: %v", err)
+	}
+	defer s.Stop()
+
+	select {
+	case <-handler.handled:
+	case <-time.After(maxWait):
+		t.Fatalf("no message from a second response handled within %s", maxWait)
+	}
+
+	if <-connectedAtReconnect {
+		t.Error("streamer was still marked connected when it came back for a second response")
+	}
+}
+
 // settledGoroutineCount lets transient goroutines finish, then reports the
 // current count.
 func settledGoroutineCount() int {

internal/templates/prefix_detail.html

@@ -283,6 +283,7 @@
                 <div class="origin-item">
                     <a href="/as/{{.ASN}}" class="as-link">AS{{.ASN}}</a>
                     {{if .Handle}} ({{.Handle}}){{end}}
+                    {{if .Description}} {{.Description}}{{end}}
                     <span style="color: #7f8c8d; margin-left: 10px;">{{.PeerCount}} peer{{if ne .PeerCount 1}}s{{end}}</span>
                 </div>
                 {{end}}