Author SHA1 Message Date
sneak 73793e68e0 Write each handler batch from its flush goroutine, outside the mutex (closes #65)
check / check (push) Canceled after 0s
The AS, peer and prefix handlers wrote their batch to the database while
holding the mutex HandleMessage needs, and HandleMessage wrote a full batch
itself. For as long as a write took, the handler took nothing off its queue,
and the streamer dropped updates once the queue was half full.

Now only the flush goroutine writes: it takes the batch under the mutex,
releases it, then writes. A full batch wakes the flush goroutine instead.
Stop still writes what the handler holds.

While a write runs, the next batch has no size limit; the README memory
section says so.

Model: opus-5-5
2026-10-14 17:50:38 +00:00
clawbot e0b9c2685f Reconnect when RIS Live ends or stalls the stream (closes #53)
check / check (push) Canceled after 0s
When RIS Live ended the response normally, the reconnect loop stopped for good and the health check kept reporting the feed connected; a connection that stayed open but sent nothing blocked forever. Now only `Stop` ends the loop: any other end clears the connected flag and reconnects with the existing backoff. If no line arrives for 60 seconds, including while waiting for RIS Live to answer the request, the streamer drops the connection and reconnects. Tests use a local fake server. README "Reconnection" describes both.

Model: opus-5-5
2026-10-14 19:42:57 +02:00
clawbot ad4c3d91f1 Show the prefix page's origin names from the prefix query (closes #67)
check / check (push) Canceled after 0s
The prefix page looked up each origin AS's details only to show its handle and description, and that lookup reads every live route the AS originates. `GetPrefixDetailsContext` already selected the handle and description and dropped them; it now returns them keyed by AS number, and the page uses them. The origin list now also shows the description after the handle, which it never rendered. The JSON prefix answer is unchanged. The test serves the page from a store whose AS lookup always fails.

Model: opus-5-5
2026-10-14 19:08:58 +02:00
clawbot b4dee48401 Exit with status 1 when the web server cannot listen (closes #73)
check / check (push) Canceled after 0s
`Server.Start` opened its port inside a goroutine and returned nil at once, so a port already in use was only logged and the daemon kept running with no web server. It now opens the listener before returning and returns that error; serving runs in the background on the open listener. `CLIEntry` turns an error from `Run` into an fx shutdown with exit status 1, after the normal stop sequence, so a container restart policy can act. A serving error after a successful listen is still only logged.

Model: opus-5-5
2026-10-14 18:26:04 +02:00
15 changed files with 494 additions and 119 deletions
+4
View File
@@ -233,6 +233,10 @@ What happens at each limit:
keeps running. keeps running.
- Handler queues: each of the four handler queues holds at most 20,000 messages. - Handler queues: each of the four handler queues holds at most 20,000 messages.
When a queue fills, the streamer drops messages instead of blocking. When a queue fills, the streamer drops messages instead of blocking.
- Handler batches: while the AS, peer or prefix handler writes a batch to the
database, the updates that arrive collect in its next batch, which has no size
limit. A database that stays slower than the feed grows memory instead of
dropping updates.
With `DEBUG=routewatch` the daemon logs a `System stats` line every 60 seconds With `DEBUG=routewatch` the daemon logs a `System stats` line every 60 seconds
with the goroutine count and Go memory figures. with the goroutine count and Go memory figures.
+14 -7
View File
@@ -1632,16 +1632,17 @@ func (d *Database) GetASPeersContext(ctx context.Context, asn int) ([]ASPeer, er
} }
// GetPrefixDetails returns detailed information about a prefix // GetPrefixDetails returns detailed information about a prefix
func (d *Database) GetPrefixDetails(prefix string) ([]LiveRoute, error) { func (d *Database) GetPrefixDetails(prefix string) ([]LiveRoute, map[int]ASN, error) {
return d.GetPrefixDetailsContext(context.Background(), prefix) return d.GetPrefixDetailsContext(context.Background(), prefix)
} }
// GetPrefixDetailsContext returns detailed information about a prefix with context support // GetPrefixDetailsContext returns the live routes for a prefix and, keyed by
func (d *Database) GetPrefixDetailsContext(ctx context.Context, prefix string) ([]LiveRoute, error) { // AS number, the handle and description of each AS that originates it.
func (d *Database) GetPrefixDetailsContext(ctx context.Context, prefix string) ([]LiveRoute, map[int]ASN, error) {
// Determine if it's IPv4 or IPv6 by parsing the prefix // Determine if it's IPv4 or IPv6 by parsing the prefix
_, ipnet, err := net.ParseCIDR(prefix) _, ipnet, err := net.ParseCIDR(prefix)
if err != nil { if err != nil {
return nil, fmt.Errorf("invalid prefix format: %w", err) return nil, nil, fmt.Errorf("invalid prefix format: %w", err)
} }
tableName := "live_routes_v4" tableName := "live_routes_v4"
@@ -1663,11 +1664,12 @@ func (d *Database) GetPrefixDetailsContext(ctx context.Context, prefix string) (
rows, err := d.db.QueryContext(ctx, query, prefix) rows, err := d.db.QueryContext(ctx, query, prefix)
if err != nil { if err != nil {
return nil, fmt.Errorf("failed to query prefix details: %w", err) return nil, nil, fmt.Errorf("failed to query prefix details: %w", err)
} }
defer func() { _ = rows.Close() }() defer func() { _ = rows.Close() }()
var routes []LiveRoute var routes []LiveRoute
origins := make(map[int]ASN)
for rows.Next() { for rows.Next() {
var route LiveRoute var route LiveRoute
var pathJSON string var pathJSON string
@@ -1690,13 +1692,18 @@ func (d *Database) GetPrefixDetailsContext(ctx context.Context, prefix string) (
route.IPVersion = ipVersion route.IPVersion = ipVersion
route.MaskLength, _ = ipnet.Mask.Size() route.MaskLength, _ = ipnet.Mask.Size()
routes = append(routes, route) routes = append(routes, route)
origins[route.OriginASN] = ASN{
ASN: route.OriginASN,
Handle: handle.String,
Description: description.String,
}
} }
if len(routes) == 0 { if len(routes) == 0 {
return nil, fmt.Errorf("%w: %s", ErrNoRoute, prefix) return nil, nil, fmt.Errorf("%w: %s", ErrNoRoute, prefix)
} }
return routes, nil return routes, origins, nil
} }
// GetRandomPrefixesByLength returns a random sample of prefixes with the specified mask length // GetRandomPrefixesByLength returns a random sample of prefixes with the specified mask length
+2 -2
View File
@@ -76,8 +76,8 @@ type Store interface {
GetASDetailsContext(ctx context.Context, asn int) (*ASN, []LiveRoute, error) GetASDetailsContext(ctx context.Context, asn int) (*ASN, []LiveRoute, error)
GetASPeers(asn int) ([]ASPeer, error) GetASPeers(asn int) ([]ASPeer, error)
GetASPeersContext(ctx context.Context, asn int) ([]ASPeer, error) GetASPeersContext(ctx context.Context, asn int) ([]ASPeer, error)
GetPrefixDetails(prefix string) ([]LiveRoute, error) GetPrefixDetails(prefix string) ([]LiveRoute, map[int]ASN, error)
GetPrefixDetailsContext(ctx context.Context, prefix string) ([]LiveRoute, error) GetPrefixDetailsContext(ctx context.Context, prefix string) ([]LiveRoute, map[int]ASN, error)
GetRandomPrefixesByLength(maskLength, ipVersion, limit int) ([]LiveRoute, error) GetRandomPrefixesByLength(maskLength, ipVersion, limit int) ([]LiveRoute, error)
GetRandomPrefixesByLengthContext(ctx context.Context, maskLength, ipVersion, limit int) ([]LiveRoute, error) GetRandomPrefixesByLengthContext(ctx context.Context, maskLength, ipVersion, limit int) ([]LiveRoute, error)
+5 -3
View File
@@ -252,13 +252,15 @@ func (m *mockStore) GetASDetailsContext(ctx context.Context, asn int) (*database
} }
// GetPrefixDetails mock implementation // GetPrefixDetails mock implementation
func (m *mockStore) GetPrefixDetails(prefix string) ([]database.LiveRoute, error) { func (m *mockStore) GetPrefixDetails(prefix string) ([]database.LiveRoute, map[int]database.ASN, error) {
// Return empty routes for now // Return empty routes for now
return []database.LiveRoute{}, nil return []database.LiveRoute{}, map[int]database.ASN{}, nil
} }
// GetPrefixDetailsContext mock implementation with context support // GetPrefixDetailsContext mock implementation with context support
func (m *mockStore) GetPrefixDetailsContext(ctx context.Context, prefix string) ([]database.LiveRoute, error) { func (m *mockStore) GetPrefixDetailsContext(
ctx context.Context, prefix string,
) ([]database.LiveRoute, map[int]database.ASN, error) {
return m.GetPrefixDetails(prefix) return m.GetPrefixDetails(prefix)
} }
+49 -27
View File
@@ -32,12 +32,15 @@ type ASHandler struct {
db database.Store db database.Store
logger *logger.Logger logger *logger.Logger
// Batching // Batching. mu guards batch only: the flush goroutine takes the batch
mu sync.Mutex // under mu and writes it after releasing mu, so HandleMessage never
batch []asnOp // waits for a database write.
lastFlush time.Time mu sync.Mutex
stopCh chan struct{} batch []asnOp
wg sync.WaitGroup batchFullCh chan struct{} // wakes the flush goroutine when batch is full
lastFlush time.Time // used only by the flush goroutine
stopCh chan struct{}
wg sync.WaitGroup
} }
type asnOp struct { type asnOp struct {
@@ -52,11 +55,12 @@ type asnOp struct {
// background goroutine is terminated. // background goroutine is terminated.
func NewASHandler(db database.Store, logger *logger.Logger) *ASHandler { func NewASHandler(db database.Store, logger *logger.Logger) *ASHandler {
h := &ASHandler{ h := &ASHandler{
db: db, db: db,
logger: logger, logger: logger,
batch: make([]asnOp, 0, asnBatchSize), batch: make([]asnOp, 0, asnBatchSize),
lastFlush: time.Now(), batchFullCh: make(chan struct{}, 1),
stopCh: make(chan struct{}), lastFlush: time.Now(),
stopCh: make(chan struct{}),
} }
// Start the flush timer goroutine // Start the flush timer goroutine
@@ -85,8 +89,8 @@ func (h *ASHandler) QueueCapacity() int {
// HandleMessage processes a RIS Live BGP message by extracting all ASNs from // HandleMessage processes a RIS Live BGP message by extracting all ASNs from
// the AS path and queuing them for batch insertion into the database. The // the AS path and queuing them for batch insertion into the database. The
// origin ASN (last element in the path) and all transit ASNs are recorded // origin ASN (last element in the path) and all transit ASNs are recorded
// with their associated timestamps. The batch is automatically flushed when // with their associated timestamps. When the batch reaches the configured size
// it reaches the configured size threshold. // threshold, the flush goroutine is woken to write it.
func (h *ASHandler) HandleMessage(msg *ristypes.RISMessage) { func (h *ASHandler) HandleMessage(msg *ristypes.RISMessage) {
// Use the pre-parsed timestamp // Use the pre-parsed timestamp
timestamp := msg.ParsedTimestamp timestamp := msg.ParsedTimestamp
@@ -118,13 +122,18 @@ func (h *ASHandler) HandleMessage(msg *ristypes.RISMessage) {
} }
} }
// Check if we need to flush // A full batch wakes the flush goroutine. If it is writing, the wake-up
// waits in batchFullCh and the batch keeps growing until the write ends.
if len(h.batch) >= asnBatchSize { if len(h.batch) >= asnBatchSize {
h.flushBatchLocked() select {
case h.batchFullCh <- struct{}{}:
default: // already woken
}
} }
} }
// flushLoop runs in a goroutine and periodically flushes batches // flushLoop runs in a goroutine, the only one that writes the batch: it
// flushes when the batch is full, periodically, and once more on Stop.
func (h *ASHandler) flushLoop() { func (h *ASHandler) flushLoop() {
defer h.wg.Done() defer h.wg.Done()
ticker := time.NewTicker(asnBatchTimeout) ticker := time.NewTicker(asnBatchTimeout)
@@ -133,31 +142,46 @@ func (h *ASHandler) flushLoop() {
for { for {
select { select {
case <-ticker.C: case <-ticker.C:
h.mu.Lock()
if time.Since(h.lastFlush) >= asnBatchTimeout { if time.Since(h.lastFlush) >= asnBatchTimeout {
h.flushBatchLocked() h.flushBatch()
} }
h.mu.Unlock() case <-h.batchFullCh:
h.flushBatch()
case <-h.stopCh: case <-h.stopCh:
// Final flush // Final flush
h.mu.Lock() h.flushBatch()
h.flushBatchLocked()
h.mu.Unlock()
return return
} }
} }
} }
// flushBatchLocked flushes the ASN batch to the database (must be called with mutex held) // takeBatch returns the pending operations and leaves an empty batch in their
func (h *ASHandler) flushBatchLocked() { // place for HandleMessage to fill.
func (h *ASHandler) takeBatch() []asnOp {
h.mu.Lock()
defer h.mu.Unlock()
if len(h.batch) == 0 { if len(h.batch) == 0 {
return nil
}
batch := h.batch
h.batch = make([]asnOp, 0, asnBatchSize)
return batch
}
// flushBatch takes the pending batch and writes it to the database, without
// holding the mutex during the write.
func (h *ASHandler) flushBatch() {
batch := h.takeBatch()
if len(batch) == 0 {
return return
} }
// Process ASNs first (deduped) // Process ASNs first (deduped)
asnMap := make(map[int]time.Time) asnMap := make(map[int]time.Time)
for _, op := range h.batch { for _, op := range batch {
if existing, ok := asnMap[op.number]; !ok || op.timestamp.After(existing) { if existing, ok := asnMap[op.number]; !ok || op.timestamp.After(existing) {
asnMap[op.number] = op.timestamp asnMap[op.number] = op.timestamp
} }
@@ -168,8 +192,6 @@ func (h *ASHandler) flushBatchLocked() {
h.logger.Error("Failed to process ASN batch", "error", err, "count", len(asnMap)) h.logger.Error("Failed to process ASN batch", "error", err, "count", len(asnMap))
} }
// Clear batch
h.batch = h.batch[:0]
h.lastFlush = time.Now() h.lastFlush = time.Now()
} }
+192
View File
@@ -0,0 +1,192 @@
package routewatch
import (
"slices"
"sync"
"testing"
"time"
"git.eeqj.de/sneak/routewatch/internal/database"
"git.eeqj.de/sneak/routewatch/internal/logger"
"git.eeqj.de/sneak/routewatch/internal/ristypes"
)
// handleMessageTimeout is how long a test waits for HandleMessage to return,
// or for a write to start, before it fails.
const handleMessageTimeout = 2 * time.Second
// blockingStore is a mockStore whose batch writes for the AS, peer and prefix
// handlers wait until the test closes release. writeStarted is closed when the
// first of them starts. It records what each write was given.
type blockingStore struct {
*mockStore
release chan struct{}
writeStarted chan struct{}
startOnce sync.Once
mu sync.Mutex
prefixes map[string]bool
asns map[int]bool
peers map[string]bool
}
func newBlockingStore() *blockingStore {
return &blockingStore{
mockStore: newMockStore(),
release: make(chan struct{}),
writeStarted: make(chan struct{}),
prefixes: make(map[string]bool),
asns: make(map[int]bool),
peers: make(map[string]bool),
}
}
func (s *blockingStore) waitForRelease() {
s.startOnce.Do(func() { close(s.writeStarted) })
<-s.release
}
func (s *blockingStore) UpsertLiveRouteBatch(routes []*database.LiveRoute) error {
s.waitForRelease()
s.mu.Lock()
defer s.mu.Unlock()
for _, route := range routes {
s.prefixes[route.Prefix] = true
}
return nil
}
func (s *blockingStore) GetOrCreateASNBatch(asns map[int]time.Time) error {
s.waitForRelease()
s.mu.Lock()
defer s.mu.Unlock()
for asn := range asns {
s.asns[asn] = true
}
return nil
}
func (s *blockingStore) UpdatePeerBatch(peers map[string]database.PeerUpdate) error {
s.waitForRelease()
s.mu.Lock()
defer s.mu.Unlock()
for peerIP := range peers {
s.peers[peerIP] = true
}
return nil
}
// returnsInTime reports whether f returns within handleMessageTimeout.
func returnsInTime(f func()) bool {
done := make(chan struct{})
go func() {
f()
close(done)
}()
select {
case <-done:
return true
case <-time.After(handleMessageTimeout):
return false
}
}
// handleWhileAWriteIsBlocked hands h the messages in fill, which fill its
// batch so that the handler writes it to store, waits until the write starts,
// and hands h the message extra while store holds the write. HandleMessage
// must return each time. Then it lets the writes finish and stops h, which
// writes what it holds.
func handleWhileAWriteIsBlocked(
t *testing.T,
store *blockingStore,
h interface {
HandleMessage(*ristypes.RISMessage)
Stop()
},
fill []*ristypes.RISMessage,
extra *ristypes.RISMessage,
) {
t.Helper()
defer h.Stop()
defer close(store.release)
if !returnsInTime(func() {
for _, msg := range fill {
h.HandleMessage(msg)
}
}) {
t.Fatal("HandleMessage did not return after filling the batch: it waits for the database write")
}
select {
case <-store.writeStarted:
case <-time.After(handleMessageTimeout):
t.Fatal("the handler did not write its full batch")
}
if !returnsInTime(func() { h.HandleMessage(extra) }) {
t.Fatal("HandleMessage did not return while a database write was blocked")
}
}
func TestPrefixHandlerHandlesMessagesWhileAWriteIsBlocked(t *testing.T) {
const (
fillPrefix = "192.0.2.0/24"
extraPrefix = "198.51.100.0/24"
)
announce := func(prefixes []string) *ristypes.RISMessage {
return &ristypes.RISMessage{
Peer: testPeerIP,
Path: ristypes.ASPath{testASNA},
Announcements: []ristypes.RISAnnouncement{{NextHop: testPeerIP, Prefixes: prefixes}},
}
}
store := newBlockingStore()
h := NewPrefixHandler(store, logger.New())
handleWhileAWriteIsBlocked(t, store, h,
[]*ristypes.RISMessage{announce(slices.Repeat([]string{fillPrefix}, prefixBatchSize))},
announce([]string{extraPrefix}))
store.mu.Lock()
defer store.mu.Unlock()
if !store.prefixes[extraPrefix] {
t.Errorf("Stop did not write %s, handled while a write was blocked", extraPrefix)
}
}
func TestASHandlerHandlesMessagesWhileAWriteIsBlocked(t *testing.T) {
store := newBlockingStore()
h := NewASHandler(store, logger.New())
handleWhileAWriteIsBlocked(t, store, h,
[]*ristypes.RISMessage{{Path: slices.Repeat(ristypes.ASPath{testASNA}, asnBatchSize)}},
&ristypes.RISMessage{Path: ristypes.ASPath{testASNB}})
store.mu.Lock()
defer store.mu.Unlock()
if !store.asns[testASNB] {
t.Errorf("Stop did not write AS%d, handled while a write was blocked", testASNB)
}
}
func TestPeerHandlerHandlesMessagesWhileAWriteIsBlocked(t *testing.T) {
const otherPeerIP = "2001:db8:ffff::2"
store := newBlockingStore()
h := NewPeerHandler(store, logger.New())
handleWhileAWriteIsBlocked(t, store, h,
slices.Repeat([]*ristypes.RISMessage{{Peer: testPeerIP}}, peerBatchSize),
&ristypes.RISMessage{Peer: otherPeerIP})
store.mu.Lock()
defer store.mu.Unlock()
if !store.peers[otherPeerIP] {
t.Errorf("Stop did not write peer %s, handled while a write was blocked", otherPeerIP)
}
}
+5
View File
@@ -20,6 +20,8 @@ const (
debugInterval = 60 * time.Second debugInterval = 60 * time.Second
// bytesPerMB is bytes per megabyte // bytesPerMB is bytes per megabyte
bytesPerMB = 1024 * 1024 bytesPerMB = 1024 * 1024
// failureExitCode is the exit status when RouteWatch stops on an error
failureExitCode = 1
) )
// logDebugStats logs goroutine count and memory usage // logDebugStats logs goroutine count and memory usage
@@ -83,6 +85,9 @@ func CLIEntry() {
go func() { go func() {
if err := rw.Run(ctx); err != nil { if err := rw.Run(ctx); err != nil {
logger.Error("RouteWatch error", "error", err) logger.Error("RouteWatch error", "error", err)
if err := shutdowner.Shutdown(fx.ExitCode(failureExitCode)); err != nil {
logger.Error("Failed to shutdown gracefully", "error", err)
}
} }
}() }()
+49 -27
View File
@@ -35,12 +35,15 @@ type PeerHandler struct {
db database.Store db database.Store
logger *logger.Logger logger *logger.Logger
// Batching // Batching. mu guards peerBatch only: the flush goroutine takes the batch
mu sync.Mutex // under mu and writes it after releasing mu, so HandleMessage never
peerBatch []peerUpdate // waits for a database write.
lastFlush time.Time mu sync.Mutex
stopCh chan struct{} peerBatch []peerUpdate
wg sync.WaitGroup batchFullCh chan struct{} // wakes the flush goroutine when peerBatch is full
lastFlush time.Time // used only by the flush goroutine
stopCh chan struct{}
wg sync.WaitGroup
} }
type peerUpdate struct { type peerUpdate struct {
@@ -56,11 +59,12 @@ type peerUpdate struct {
// should be stopped by calling Stop when it is no longer needed. // should be stopped by calling Stop when it is no longer needed.
func NewPeerHandler(db database.Store, logger *logger.Logger) *PeerHandler { func NewPeerHandler(db database.Store, logger *logger.Logger) *PeerHandler {
h := &PeerHandler{ h := &PeerHandler{
db: db, db: db,
logger: logger, logger: logger,
peerBatch: make([]peerUpdate, 0, peerBatchSize), peerBatch: make([]peerUpdate, 0, peerBatchSize),
lastFlush: time.Now(), batchFullCh: make(chan struct{}, 1),
stopCh: make(chan struct{}), lastFlush: time.Now(),
stopCh: make(chan struct{}),
} }
// Start the flush timer goroutine // Start the flush timer goroutine
@@ -87,8 +91,8 @@ func (h *PeerHandler) QueueCapacity() int {
// HandleMessage processes a RIS message to track peer information. // HandleMessage processes a RIS message to track peer information.
// It extracts the peer IP address and ASN from the message and adds // It extracts the peer IP address and ASN from the message and adds
// the update to an internal batch. When the batch reaches peerBatchSize // the update to an internal batch. The flush goroutine writes the batch to the
// or the batch timeout expires, the batch is flushed to the database. // database when it reaches peerBatchSize or the batch timeout expires.
func (h *PeerHandler) HandleMessage(msg *ristypes.RISMessage) { func (h *PeerHandler) HandleMessage(msg *ristypes.RISMessage) {
// Parse peer ASN from string // Parse peer ASN from string
peerASN := 0 peerASN := 0
@@ -109,13 +113,18 @@ func (h *PeerHandler) HandleMessage(msg *ristypes.RISMessage) {
timestamp: msg.ParsedTimestamp, timestamp: msg.ParsedTimestamp,
}) })
// Check if we need to flush // A full batch wakes the flush goroutine. If it is writing, the wake-up
// waits in batchFullCh and the batch keeps growing until the write ends.
if len(h.peerBatch) >= peerBatchSize { if len(h.peerBatch) >= peerBatchSize {
h.flushBatchLocked() select {
case h.batchFullCh <- struct{}{}:
default: // already woken
}
} }
} }
// flushLoop runs in a goroutine and periodically flushes batches // flushLoop runs in a goroutine, the only one that writes the batch: it
// flushes when the batch is full, periodically, and once more on Stop.
func (h *PeerHandler) flushLoop() { func (h *PeerHandler) flushLoop() {
defer h.wg.Done() defer h.wg.Done()
ticker := time.NewTicker(peerBatchTimeout) ticker := time.NewTicker(peerBatchTimeout)
@@ -124,31 +133,46 @@ func (h *PeerHandler) flushLoop() {
for { for {
select { select {
case <-ticker.C: case <-ticker.C:
h.mu.Lock()
if time.Since(h.lastFlush) >= peerBatchTimeout { if time.Since(h.lastFlush) >= peerBatchTimeout {
h.flushBatchLocked() h.flushBatch()
} }
h.mu.Unlock() case <-h.batchFullCh:
h.flushBatch()
case <-h.stopCh: case <-h.stopCh:
// Final flush // Final flush
h.mu.Lock() h.flushBatch()
h.flushBatchLocked()
h.mu.Unlock()
return return
} }
} }
} }
// flushBatchLocked flushes the peer batch to the database (must be called with mutex held) // takeBatch returns the pending updates and leaves an empty batch in their
func (h *PeerHandler) flushBatchLocked() { // place for HandleMessage to fill.
func (h *PeerHandler) takeBatch() []peerUpdate {
h.mu.Lock()
defer h.mu.Unlock()
if len(h.peerBatch) == 0 { if len(h.peerBatch) == 0 {
return nil
}
batch := h.peerBatch
h.peerBatch = make([]peerUpdate, 0, peerBatchSize)
return batch
}
// flushBatch takes the pending batch and writes it to the database, without
// holding the mutex during the write.
func (h *PeerHandler) flushBatch() {
batch := h.takeBatch()
if len(batch) == 0 {
return return
} }
// Deduplicate by peer IP, keeping the latest update for each peer // Deduplicate by peer IP, keeping the latest update for each peer
peerMap := make(map[string]peerUpdate) peerMap := make(map[string]peerUpdate)
for _, update := range h.peerBatch { for _, update := range batch {
if existing, ok := peerMap[update.peerIP]; !ok || update.timestamp.After(existing.timestamp) { if existing, ok := peerMap[update.peerIP]; !ok || update.timestamp.After(existing.timestamp) {
peerMap[update.peerIP] = update peerMap[update.peerIP] = update
} }
@@ -170,8 +194,6 @@ func (h *PeerHandler) flushBatchLocked() {
h.logger.Error("Failed to process peer batch", "error", err, "count", len(dbPeerMap)) h.logger.Error("Failed to process peer batch", "error", err, "count", len(dbPeerMap))
} }
// Clear batch
h.peerBatch = h.peerBatch[:0]
h.lastFlush = time.Now() h.lastFlush = time.Now()
} }
+48 -26
View File
@@ -40,12 +40,15 @@ type PrefixHandler struct {
logger *logger.Logger logger *logger.Logger
metrics *metrics.Tracker metrics *metrics.Tracker
// Batching // Batching. mu guards batch only: the flush goroutine takes the batch
mu sync.Mutex // under mu and writes it after releasing mu, so HandleMessage never
batch []prefixUpdate // waits for a database write.
lastFlush time.Time mu sync.Mutex
stopCh chan struct{} batch []prefixUpdate
wg sync.WaitGroup batchFullCh chan struct{} // wakes the flush goroutine when batch is full
lastFlush time.Time // used only by the flush goroutine
stopCh chan struct{}
wg sync.WaitGroup
} }
type prefixUpdate struct { type prefixUpdate struct {
@@ -60,11 +63,12 @@ type prefixUpdate struct {
// NewPrefixHandler creates a new batched prefix tracking handler // NewPrefixHandler creates a new batched prefix tracking handler
func NewPrefixHandler(db database.Store, logger *logger.Logger) *PrefixHandler { func NewPrefixHandler(db database.Store, logger *logger.Logger) *PrefixHandler {
h := &PrefixHandler{ h := &PrefixHandler{
db: db, db: db,
logger: logger, logger: logger,
batch: make([]prefixUpdate, 0, prefixBatchSize), batch: make([]prefixUpdate, 0, prefixBatchSize),
lastFlush: time.Now(), batchFullCh: make(chan struct{}, 1),
stopCh: make(chan struct{}), lastFlush: time.Now(),
stopCh: make(chan struct{}),
} }
// Start the flush timer goroutine // Start the flush timer goroutine
@@ -140,13 +144,18 @@ func (h *PrefixHandler) HandleMessage(msg *ristypes.RISMessage) {
} }
} }
// Check if we need to flush // A full batch wakes the flush goroutine. If it is writing, the wake-up
// waits in batchFullCh and the batch keeps growing until the write ends.
if len(h.batch) >= prefixBatchSize { if len(h.batch) >= prefixBatchSize {
h.flushBatchLocked() select {
case h.batchFullCh <- struct{}{}:
default: // already woken
}
} }
} }
// flushLoop runs in a goroutine and periodically flushes batches // flushLoop runs in a goroutine, the only one that writes the batch: it
// flushes when the batch is full, periodically, and once more on Stop.
func (h *PrefixHandler) flushLoop() { func (h *PrefixHandler) flushLoop() {
defer h.wg.Done() defer h.wg.Done()
ticker := time.NewTicker(prefixBatchTimeout) ticker := time.NewTicker(prefixBatchTimeout)
@@ -155,30 +164,45 @@ func (h *PrefixHandler) flushLoop() {
for { for {
select { select {
case <-ticker.C: case <-ticker.C:
h.mu.Lock()
if time.Since(h.lastFlush) >= prefixBatchTimeout { if time.Since(h.lastFlush) >= prefixBatchTimeout {
h.flushBatchLocked() h.flushBatch()
} }
h.mu.Unlock() case <-h.batchFullCh:
h.flushBatch()
case <-h.stopCh: case <-h.stopCh:
// Final flush // Final flush
h.mu.Lock() h.flushBatch()
h.flushBatchLocked()
h.mu.Unlock()
return return
} }
} }
} }
// flushBatchLocked flushes the prefix batch to the database (must be called with mutex held) // takeBatch returns the pending updates and leaves an empty batch in their
func (h *PrefixHandler) flushBatchLocked() { // place for HandleMessage to fill.
func (h *PrefixHandler) takeBatch() []prefixUpdate {
h.mu.Lock()
defer h.mu.Unlock()
if len(h.batch) == 0 { if len(h.batch) == 0 {
return nil
}
batch := h.batch
h.batch = make([]prefixUpdate, 0, prefixBatchSize)
return batch
}
// flushBatch takes the pending batch and writes it to the database, without
// holding the mutex during the write.
func (h *PrefixHandler) flushBatch() {
batch := h.takeBatch()
if len(batch) == 0 {
return return
} }
startTime := time.Now() startTime := time.Now()
batchSize := len(h.batch) batchSize := len(batch)
// For each prefix and peer, keep only the last update the feed delivered. // For each prefix and peer, keep only the last update the feed delivered.
// Updates from different peers for the same prefix are all kept. Arrival // Updates from different peers for the same prefix are all kept. Arrival
@@ -186,7 +210,7 @@ func (h *PrefixHandler) flushBatchLocked() {
// updates within one second carry the same one. // updates within one second carry the same one.
type prefixAndPeer struct{ prefix, peer string } type prefixAndPeer struct{ prefix, peer string }
lastUpdates := make(map[prefixAndPeer]prefixUpdate) lastUpdates := make(map[prefixAndPeer]prefixUpdate)
for _, update := range h.batch { for _, update := range batch {
lastUpdates[prefixAndPeer{update.prefix, update.peer}] = update lastUpdates[prefixAndPeer{update.prefix, update.peer}] = update
} }
@@ -261,8 +285,6 @@ func (h *PrefixHandler) flushBatchLocked() {
"duration_ms", elapsed.Milliseconds(), "duration_ms", elapsed.Milliseconds(),
) )
// Clear batch
h.batch = h.batch[:0]
h.lastFlush = time.Now() h.lastFlush = time.Now()
} }
+4 -11
View File
@@ -30,11 +30,6 @@ func TestPrefixHandlerStoresPrefixesTheIPLookupFinds(t *testing.T) {
// Built without NewPrefixHandler's flush timer, so the test flushes itself. // Built without NewPrefixHandler's flush timer, so the test flushes itself.
h := &PrefixHandler{db: db, logger: logger.New()} h := &PrefixHandler{db: db, logger: logger.New()}
flush := func() {
h.mu.Lock()
defer h.mu.Unlock()
h.flushBatchLocked()
}
ts := time.Date(2026, 1, 2, 3, 4, 5, 0, time.UTC) ts := time.Date(2026, 1, 2, 3, 4, 5, 0, time.UTC)
h.HandleMessage(&ristypes.RISMessage{ h.HandleMessage(&ristypes.RISMessage{
@@ -46,7 +41,7 @@ func TestPrefixHandlerStoresPrefixesTheIPLookupFinds(t *testing.T) {
Prefixes: []string{"2001:db8:1::/48", "192.0.2.0/24"}, Prefixes: []string{"2001:db8:1::/48", "192.0.2.0/24"},
}}, }},
}) })
flush() h.flushBatch()
for ip, want := range map[string]string{ for ip, want := range map[string]string{
"2001:db8:1::1": "2001:db8:1::/48", "2001:db8:1::1": "2001:db8:1::/48",
@@ -66,7 +61,7 @@ func TestPrefixHandlerStoresPrefixesTheIPLookupFinds(t *testing.T) {
ParsedTimestamp: ts.Add(time.Minute), ParsedTimestamp: ts.Add(time.Minute),
Withdrawals: []string{"2001:db8:1:0:0:0:0:0/48", "192.0.2.0/24"}, Withdrawals: []string{"2001:db8:1:0:0:0:0:0/48", "192.0.2.0/24"},
}) })
flush() h.flushBatch()
for _, ip := range []string{"2001:db8:1::1", "192.0.2.1"} { for _, ip := range []string{"2001:db8:1::1", "192.0.2.1"} {
if info, err := db.GetIPInfo(ip); !errors.Is(err, database.ErrNoRoute) { if info, err := db.GetIPInfo(ip); !errors.Is(err, database.ErrNoRoute) {
@@ -164,13 +159,11 @@ func TestPrefixHandlerAppliesEachPeersLastUpdateInABatch(t *testing.T) {
for _, msg := range batch { for _, msg := range batch {
h.HandleMessage(msg) h.HandleMessage(msg)
} }
h.mu.Lock() h.flushBatch()
h.flushBatchLocked()
h.mu.Unlock()
} }
ctx := context.Background() ctx := context.Background()
routes, err := db.GetPrefixDetailsContext(ctx, prefix) routes, _, err := db.GetPrefixDetailsContext(ctx, prefix)
if err != nil && !errors.Is(err, database.ErrNoRoute) { if err != nil && !errors.Is(err, database.ErrNoRoute) {
t.Fatalf("GetPrefixDetailsContext: %v", err) t.Fatalf("GetPrefixDetailsContext: %v", err)
} }
+4 -12
View File
@@ -759,7 +759,7 @@ func (s *Server) handlePrefixDetailJSON() http.HandlerFunc {
} }
prefix := parsed.Masked().String() prefix := parsed.Masked().String()
routes, err := s.db.GetPrefixDetailsContext(r.Context(), prefix) routes, _, err := s.db.GetPrefixDetailsContext(r.Context(), prefix)
if err != nil { if err != nil {
if errors.Is(err, database.ErrNoRoute) { if errors.Is(err, database.ErrNoRoute) {
writeJSONError(w, http.StatusNotFound, err.Error()) writeJSONError(w, http.StatusNotFound, err.Error())
@@ -930,7 +930,7 @@ func (s *Server) handlePrefixDetail() http.HandlerFunc {
} }
prefix := parsed.Masked().String() prefix := parsed.Masked().String()
routes, err := s.db.GetPrefixDetailsContext(r.Context(), prefix) routes, originASNs, err := s.db.GetPrefixDetailsContext(r.Context(), prefix)
if err != nil { if err != nil {
if errors.Is(err, database.ErrNoRoute) { if errors.Is(err, database.ErrNoRoute) {
http.Error(w, "Prefix not found", http.StatusNotFound) http.Error(w, "Prefix not found", http.StatusNotFound)
@@ -952,18 +952,10 @@ func (s *Server) handlePrefixDetail() http.HandlerFunc {
originMap := make(map[int]*ASNInfo) originMap := make(map[int]*ASNInfo)
for _, route := range routes { for _, route := range routes {
if _, exists := originMap[route.OriginASN]; !exists { if _, exists := originMap[route.OriginASN]; !exists {
// Get AS info from database
asInfo, _, _ := s.db.GetASDetailsContext(r.Context(), route.OriginASN)
handle := ""
description := ""
if asInfo != nil {
handle = asInfo.Handle
description = asInfo.Description
}
originMap[route.OriginASN] = &ASNInfo{ originMap[route.OriginASN] = &ASNInfo{
ASN: route.OriginASN, ASN: route.OriginASN,
Handle: handle, Handle: originASNs[route.OriginASN].Handle,
Description: description, Description: originASNs[route.OriginASN].Description,
PeerCount: 0, PeerCount: 0,
} }
} }
+70
View File
@@ -3,10 +3,13 @@ package server
import ( import (
"context" "context"
"encoding/json" "encoding/json"
"errors"
"html"
"net/http" "net/http"
"net/http/httptest" "net/http/httptest"
"runtime" "runtime"
"slices" "slices"
"strings"
"testing" "testing"
"time" "time"
@@ -15,6 +18,7 @@ import (
"git.eeqj.de/sneak/routewatch/internal/logger" "git.eeqj.de/sneak/routewatch/internal/logger"
"git.eeqj.de/sneak/routewatch/internal/metrics" "git.eeqj.de/sneak/routewatch/internal/metrics"
"git.eeqj.de/sneak/routewatch/internal/streamer" "git.eeqj.de/sneak/routewatch/internal/streamer"
"git.eeqj.de/sneak/routewatch/pkg/asinfo"
"github.com/google/uuid" "github.com/google/uuid"
) )
@@ -200,6 +204,72 @@ func TestPrefixDetailHandlersParsePrefix(t *testing.T) {
} }
} }
// failingASDetailsDB wraps a real store and fails every AS details lookup.
type failingASDetailsDB struct {
database.Store
}
func (failingASDetailsDB) GetASDetailsContext(_ context.Context, _ int) (*database.ASN, []database.LiveRoute, error) {
return nil, nil, errors.New("AS details lookup failed")
}
// TestPrefixDetailShowsOriginNames checks that the prefix page shows each
// origin AS's handle and description without looking up the AS's details,
// which also read every route the AS originates. Before the fix the page did
// that lookup once per origin, so with it failing the names were missing
// (https://git.eeqj.de/sneak/routewatch/issues/67). The AS path column shows
// handles too, so the test looks for the origin list's "(handle)" form.
func TestPrefixDetailShowsOriginNames(t *testing.T) {
db, err := database.New(&config.Config{StateDir: t.TempDir()}, logger.New())
if err != nil {
t.Fatalf("database.New: %v", err)
}
t.Cleanup(func() { _ = db.Close() })
ts := time.Date(2026, 1, 2, 3, 4, 5, 0, time.UTC)
origins := []int{15169, 13335}
for _, asn := range origins {
if _, err := db.GetOrCreateASN(asn, ts); err != nil {
t.Fatalf("GetOrCreateASN(%d): %v", asn, err)
}
}
if err := db.UpsertLiveRouteBatch([]*database.LiveRoute{
{
ID: uuid.New(), Prefix: "192.0.2.0/24", MaskLength: 24, IPVersion: 4,
OriginASN: origins[0], PeerIP: "198.51.100.1", ASPath: []int{origins[0]}, NextHop: "198.51.100.1",
LastUpdated: ts,
},
{
ID: uuid.New(), Prefix: "192.0.2.0/24", MaskLength: 24, IPVersion: 4,
OriginASN: origins[1], PeerIP: "198.51.100.2", ASPath: []int{origins[1]}, NextHop: "198.51.100.2",
LastUpdated: ts,
},
}); err != nil {
t.Fatalf("UpsertLiveRouteBatch: %v", err)
}
s := New(failingASDetailsDB{db}, streamer.New(logger.New(), metrics.New()), logger.New(), &config.Config{})
rec := httptest.NewRecorder()
s.router.ServeHTTP(rec, httptest.NewRequest(http.MethodGet, "/prefix/192.0.2.0/24", nil))
if rec.Code != http.StatusOK {
t.Fatalf("status %d, want %d; body %s", rec.Code, http.StatusOK, rec.Body)
}
page := rec.Body.String()
for _, asn := range origins {
info, ok := asinfo.Get(asn)
if !ok {
t.Fatalf("AS%d is not in the AS info data", asn)
}
if want := "(" + html.EscapeString(info.Handle) + ")"; !strings.Contains(page, want) {
t.Errorf("page does not show AS%d's handle %q", asn, want)
}
if want := html.EscapeString(info.Description); !strings.Contains(page, want) {
t.Errorf("page does not show AS%d's description %q", asn, want)
}
}
}
// settledGoroutineCount lets transient goroutines finish, then reports the // settledGoroutineCount lets transient goroutines finish, then reports the
// current count. // current count.
func settledGoroutineCount() int { func settledGoroutineCount() int {
+14 -4
View File
@@ -3,6 +3,8 @@ package server
import ( import (
"context" "context"
"fmt"
"net"
"net/http" "net/http"
"strconv" "strconv"
"time" "time"
@@ -53,9 +55,12 @@ func New(db database.Store, streamer *streamer.Streamer, logger *logger.Logger,
return s return s
} }
// Start starts the HTTP server // Start listens on the configured port and serves HTTP in the background.
// It returns an error if it cannot listen, for example because the port is
// already in use.
func (s *Server) Start() error { func (s *Server) Start() error {
const ( const (
network = "tcp"
readHeaderTimeout = 40 * time.Second readHeaderTimeout = 40 * time.Second
readTimeout = 60 * time.Second readTimeout = 60 * time.Second
writeTimeout = 60 * time.Second writeTimeout = 60 * time.Second
@@ -73,10 +78,15 @@ func (s *Server) Start() error {
s.logger.Info("Starting HTTP server", "port", s.port, "addr", s.srv.Addr) s.logger.Info("Starting HTTP server", "port", s.port, "addr", s.srv.Addr)
// Start in goroutine but log when actually listening listener, err := net.Listen(network, s.srv.Addr)
if err != nil {
return fmt.Errorf("starting HTTP server: %w", err)
}
s.logger.Info("HTTP server listening", "addr", listener.Addr().String())
go func() { go func() {
s.logger.Info("HTTP server listening", "addr", s.srv.Addr) if err := s.srv.Serve(listener); err != nil && err != http.ErrServerClosed {
if err := s.srv.ListenAndServe(); err != nil && err != http.ErrServerClosed {
s.logger.Error("HTTP server error", "error", err) s.logger.Error("HTTP server error", "error", err)
} }
}() }()
+33
View File
@@ -0,0 +1,33 @@
package server
import (
"context"
"net"
"testing"
"git.eeqj.de/sneak/routewatch/internal/config"
"git.eeqj.de/sneak/routewatch/internal/logger"
"git.eeqj.de/sneak/routewatch/internal/metrics"
"git.eeqj.de/sneak/routewatch/internal/streamer"
)
// TestStartFailsWhenPortIsHeld holds a port with a listener of its own and
// checks that Start on that port returns an error. Before the fix Start
// listened in a goroutine, only logged the failure and returned nil, so the
// daemon kept running without its web server.
func TestStartFailsWhenPortIsHeld(t *testing.T) {
held, err := net.Listen("tcp", ":0")
if err != nil {
t.Fatalf("failed to open the test listener: %v", err)
}
defer func() { _ = held.Close() }()
port := held.Addr().(*net.TCPAddr).Port
log := logger.New()
s := New(nil, streamer.New(log, metrics.New()), log, &config.Config{Port: port})
defer func() { _ = s.Stop(context.Background()) }()
if err := s.Start(); err == nil {
t.Fatalf("Start returned nil while port %d was held by another listener", port)
}
}
+1
View File
@@ -283,6 +283,7 @@
<div class="origin-item"> <div class="origin-item">
<a href="/as/{{.ASN}}" class="as-link">AS{{.ASN}}</a> <a href="/as/{{.ASN}}" class="as-link">AS{{.ASN}}</a>
{{if .Handle}} ({{.Handle}}){{end}} {{if .Handle}} ({{.Handle}}){{end}}
{{if .Description}} {{.Description}}{{end}}
<span style="color: #7f8c8d; margin-left: 10px;">{{.PeerCount}} peer{{if ne .PeerCount 1}}s{{end}}</span> <span style="color: #7f8c8d; margin-left: 10px;">{{.PeerCount}} peer{{if ne .PeerCount 1}}s{{end}}</span>
</div> </div>
{{end}} {{end}}