config: migrate gomodguard to gomodguard_v2 in canonical .golangci.yml

golangci-lint v2.12.0 deprecated `gomodguard` in favour of `gomodguard_v2`.
Because the canonical config uses `default: all`, the deprecated linter is
auto-enabled and every lint run in every consuming Go repo emits a
deprecation warning.

`gomodguard` and `gomodguard_v2` are two independently registered linters
in v2.12.2, so `gomodguard_v2` is already enabled by `default: all`; only
the deprecated one needs disabling. This mirrors the existing `wsl` entry,
which was disabled for the same reason when `wsl_v5` superseded it.

No settings migration was required: the canonical config configures no
gomodguard settings at all.

Refs: #25

.dockerignore

@@ -1,36 +1,3 @@
-# .dockerignore uses Go filepath.Match, NOT .gitignore semantics: `*`
-# does not cross `/`, and a pattern without a leading `**/` is anchored
-# at the build-context root. Every depth-independent pattern therefore
-# needs the `**/` prefix — without it `config/.env` and
-# `certs/server.key` still ship while the file reads as solved. Entries
-# that are genuinely root-anchored stay unprefixed. Extend this file
-# with the repo's own host-built artifacts (compiled binaries, test
-# binaries, coverage output); those are per-repo and belong here because
-# a host build otherwise drops them into the context.
-
-# Repository metadata: exactly one, at the context root.
 .git
-
+node_modules
-# Environment and secrets. These are the reason the prefixes matter: a
+.DS_Store
-# developer's local copy is invisible to every git-based check.
-**/.env
-**/.env.*
-**/*.pem
-**/*.key
-
-# Dependencies: restored inside the image, never copied in.
-**/node_modules
-
-# OS metadata.
-**/.DS_Store
-**/Thumbs.db
-
-# Editor state. Never a build input, and it churns under a developer's
-# hands, so it invalidates COPY for reasons unrelated to the source.
-**/*.swp
-**/*.swo
-**/*~
-**/*.bak
-**/.idea
-**/.vscode
-**/*.sublime-*

.golangci.yml

@@ -16,6 +16,7 @@ linters:
     - depguard         # Dependency allow/block lists
     - godot            # Requires comments to end with periods
     - wsl              # Deprecated, replaced by wsl_v5
+    - gomodguard       # Deprecated, replaced by gomodguard_v2
     - wrapcheck        # Too verbose for internal packages
     - varnamelen       # Short names like db, id are idiomatic Go
   settings:

Dockerfile

@@ -12,17 +12,4 @@ COPY package.json yarn.lock ./
 RUN script/bootstrap
 
 COPY . .
-
+RUN make check
-# CHECK_EPOCH is a per-invocation nonce supplied by script/cibuild and
-# script/docker. Without it an unchanged tree serves this layer from
-# cache and the build reports a green it never ran. ARG is stage-scoped,
-# so it must be redeclared in every stage that runs checks. The guard
-# makes a bare `docker build .` fail loudly instead of silently reusing
-# the empty (and therefore stable) cache key. Expand the value into the
-# command so the cache miss does not depend on BuildKit's handling of an
-# unreferenced ARG. Both the guard and the check RUN reference the value,
-# so both are value-keyed: there are two independent invalidation points
-# here, not one. Keep both.
-ARG CHECK_EPOCH
-RUN [ -n "$CHECK_EPOCH" ] || exit 1
-RUN echo "check epoch: ${CHECK_EPOCH}" && make check

README.md

@@ -123,13 +123,9 @@ alpine. We provide:
 - `script/check` — run all checks: `test`, `lint`, `fmt-check` (our own
   extension)
 - `script/docker` — build the Docker image, tagged via `script/projectname`
-  (byte-identical across repos); passes the same `CHECK_EPOCH` nonce as
+  (byte-identical across repos)
-  `script/cibuild`
+- `script/cibuild` — cd to the repo root and `docker build .` (what CI runs; the
-- `script/cibuild` — cd to the repo root, assign `epoch="$(date +%s%N)$$"`, then
+  image build runs `script/check`)
-  `docker build --build-arg CHECK_EPOCH="$epoch" .` (what CI runs; the image
-  build runs `script/check`, and the per-invocation `CHECK_EPOCH` nonce is what
-  stops Docker serving that check from cache on an unchanged tree — a bare
-  `docker build .` fails closed on purpose)
 - `script/precommit` — run by the git pre-commit hook (our own extension); calls
   `script/check`
 - `script/install-precommit` — installs the git pre-commit hook (our own

TODO.md

@@ -21,34 +21,6 @@ fmt-check, and commit.
 
 # Completed Steps
 
-- 2026-08-09: Closed the secret exposure in the canonical `.dockerignore`: a
-  developer's local `.env`, `*.pem` or `*.key` was reaching the Docker build
-  context under `COPY . .`, invisible to every git-based check because
-  `.gitignore` covers it. The patterns are written to `.dockerignore`'s own
-  `filepath.Match` semantics — `**/`-prefixed so they hold at every depth, which
-  also fixes nested `node_modules` — rather than transplanted from `.gitignore`,
-  whose unprefixed form protects only the repository root while reading as
-  solved. `REPO_POLICIES.md` and both repo checklists now state that asymmetry
-  and require verification by enumerating the image rather than by reading the
-  patterns. Verified with a probe image before, against the naive unprefixed
-  form, and after.
-- 2026-08-09: Made the pinned golangci-lint actually propagate: REPO_POLICIES.md
-  now carries the canonical `script/bootstrap` snippet for Go repos, which
-  installs when the installed version does not match the pin (the old
-  `if missing` guard tested PATH presence only, so pins were inert on any
-  provisioned machine and CI silently disagreed with local) and then re-resolves
-  the binary through `PATH` and fails loudly, naming the shadowing path, when
-  the install did not take effect — the failure mode the naive
-  compare-then-install fix leaves behind while reporting success.
-- 2026-08-09: Fixed the false green in the canonical CI gate: `script/cibuild`
-  and `script/docker` now pass a per-invocation `CHECK_EPOCH` nonce, and the
-  `Dockerfile` (plus the Go multistage template in REPO_POLICIES.md, in both its
-  lint and builder stages) declares `ARG CHECK_EPOCH` with a guard that makes a
-  bare `docker build .` fail closed. Corrected the org-canonical text that
-  asserted a successful build implies all checks pass, across every document
-  carrying it: `REPO_POLICIES.md`, both repo checklists (which still told agents
-  to write the pre-fix `script/cibuild` and ended on an acceptance item the
-  guard makes unsatisfiable), and the Go styleguide.
 - 2026-08-07: Set the canonical `.golangci.yml` to the org-standard v2-schema
   config already deployed byte-identical across the org's Go repos (settings
   under `linters.settings` so thresholds like lll/funlen/cyclop/dupl actually

prompts/CODE_STYLEGUIDE_GO.md

@@ -1,6 +1,6 @@
 ---
 title: Code Styleguide — Go
-last_modified: 2026-08-09
+last_modified: 2026-03-18
 ---
 
 1.  Try to hard wrap long lines at 77 characters or less.
@@ -101,16 +101,9 @@ last_modified: 2026-08-09
     `golangci-lint`.
 
 1.  Write a `Dockerfile` for every repo, even if it only runs the tests and
-    linting. `script/cibuild` and `script/docker` should always make sure that
+    linting. `docker build .` should always make sure that the code is in an
-    the code is in an able-to-be-compiled state, linted, and any tests run, and
+    able-to-be-compiled state, linted, and any tests run. The Docker build
-    the build should fail if linting doesn't pass. That guarantee holds only
+    should fail if linting doesn't pass.
-    because those scripts pass a per-invocation `CHECK_EPOCH` build arg that
-    busts the check layers out of the Docker cache; without it an unchanged tree
-    serves those layers from cache and the build reports a green it never ran. A
-    bare `docker build .` fails closed by design, on the `[ -n "$CHECK_EPOCH" ]`
-    guard — always go through `script/cibuild` or `script/docker`. See
-    [Repository Policies](https://git.eeqj.de/sneak/prompts/raw/branch/main/prompts/REPO_POLICIES.md)
-    for the canonical form.
 
 1.  Every repo must have a `Makefile`. See
     [Repository Policies](https://git.eeqj.de/sneak/prompts/raw/branch/main/prompts/REPO_POLICIES.md)

prompts/EXISTING_REPO_CHECKLIST.md

@@ -1,6 +1,6 @@
 ---
 title: Existing Repo Checklist
-last_modified: 2026-08-09
+last_modified: 2026-07-06
 ---
 
 Use this checklist when beginning work in a repo that may not yet conform to our
@@ -29,22 +29,10 @@ with your task.
       if missing
 - [ ] `.editorconfig` exists — fetch from
       `https://git.eeqj.de/sneak/prompts/raw/branch/main/.editorconfig`
-- [ ] `Dockerfile` and `.dockerignore` exist (fetch `.dockerignore` from
+- [ ] `Dockerfile` and `.dockerignore` exist; Dockerfile runs `make check` as a
-      `https://git.eeqj.de/sneak/prompts/raw/branch/main/.dockerignore`);
+      build step — fetch `.dockerignore` from
-      Dockerfile runs `make check` as a build step, and every stage containing a
+      `https://git.eeqj.de/sneak/prompts/raw/branch/main/.dockerignore`
-      check-running `RUN` declares `ARG CHECK_EPOCH` with the
+- [ ] Gitea Actions workflow in `.gitea/workflows/` runs `docker build .` on
-      `RUN [ -n "$CHECK_EPOCH" ] || exit 1` guard immediately below it — see the
-      `CHECK_EPOCH` rule in `REPO_POLICIES.md`. Without them the check layer is
-      served from cache on an unchanged tree and the build reports a green it
-      never ran.
-- [ ] Every depth-independent pattern in `.dockerignore` carries a `**/` prefix;
-      only genuinely root-anchored entries such as `.git` are unprefixed, and
-      `.gitignore`'s patterns have not been transplanted unmodified.
-      `.dockerignore` anchors an unprefixed pattern at the context root, so the
-      transplanted form leaves `config/.env` and `certs/server.key` in the build
-      context while reading as solved — see the `.dockerignore` rule in
-      `REPO_POLICIES.md`.
-- [ ] Gitea Actions workflow in `.gitea/workflows/` runs `script/cibuild` on
       push — reference
       `https://git.eeqj.de/sneak/prompts/raw/branch/main/.gitea/workflows/check.yml`
 - [ ] Language-specific config:
@@ -116,6 +104,5 @@ with your task.
 # Final
 
 - [ ] `make check` passes
-- [ ] `script/cibuild` succeeds (a bare `docker build .` fails closed by design,
+- [ ] `docker build` succeeds
-      on the `CHECK_EPOCH` guard)
 - [ ] Commit and merge fixes before starting your actual task

prompts/NEW_REPO_CHECKLIST.md

@@ -1,6 +1,6 @@
 ---
 title: New Repo Checklist
-last_modified: 2026-08-09
+last_modified: 2026-07-06
 ---
 
 Use this checklist when creating a new repository from scratch. Follow the steps
@@ -52,18 +52,7 @@ Template files can be fetched from:
       `https://git.eeqj.de/sneak/prompts/raw/branch/main/prompts/REPO_POLICIES.md`
 - [ ] `Dockerfile` and `.dockerignore` — fetch `.dockerignore` from
       `https://git.eeqj.de/sneak/prompts/raw/branch/main/.dockerignore`
-    - Extend `.dockerignore` with the repo's own host-built artifacts, giving
+    - All Dockerfiles must run `make check` as a build step
-      every depth-independent pattern a `**/` prefix. Do not transplant
-      `.gitignore`'s patterns: `.dockerignore` anchors an unprefixed pattern at
-      the context root, so the copied form leaves `config/.env` in the build
-      context while reading as solved. See the `.dockerignore` rule in
-      `REPO_POLICIES.md`.
-    - All Dockerfiles must run `make check` as a build step, and every stage
-      containing a check-running `RUN` must declare `ARG CHECK_EPOCH` with the
-      `RUN [ -n "$CHECK_EPOCH" ] || exit 1` guard immediately below it — see the
-      `CHECK_EPOCH` rule in `REPO_POLICIES.md`. Without them the check layer is
-      served from cache on an unchanged tree and the build reports a green it
-      never ran.
     - Server: also builds and runs the application
     - Non-server: brings up dev environment and runs `make check`
     - Image pinned by sha256 hash with version/date comment
@@ -101,14 +90,8 @@ are thin shims calling them. Model scripts:
 - [ ] `script/projectname` — outputs the project name (used by `script/docker`
       for the image tag)
 - [ ] `script/docker` / `make docker` — builds Docker image, tagged via
-      `script/projectname` (byte-identical across repos); assigns
+      `script/projectname` (byte-identical across repos)
-      `epoch="$(date +%s%N)$$"` on its own line and passes
+- [ ] `script/cibuild` — cd to repo root, `docker build .` (what CI runs)
-      `--build-arg CHECK_EPOCH="$epoch"`
-- [ ] `script/cibuild` — cd to repo root, assign `epoch="$(date +%s%N)$$"` on
-      its own line, then run `docker build --build-arg CHECK_EPOCH="$epoch" .`
-      (what CI runs). The build arg is mandatory: see the `CHECK_EPOCH` rule in
-      `REPO_POLICIES.md` for why each element is load-bearing. A bare
-      `docker build .` fails closed by design.
 - [ ] `script/precommit` — called by the pre-commit hook; runs `script/check`
 - [ ] `script/install-precommit` — installs the pre-commit hook that runs
       `script/precommit`

prompts/REPO_POLICIES.md

@@ -1,6 +1,6 @@
 ---
 title: Repository Policies
-last_modified: 2026-08-09
+last_modified: 2026-08-07
 ---
 
 This document covers repository structure, tooling, and workflow standards. Code
@@ -60,19 +60,17 @@ style conventions are in separate documents:
   prerequisite since nvm requires bash. yarn is then pinned via
   `corepack prepare yarn@<version> --activate`. Never install "latest" or "lts";
   always exact versions. `script/cibuild` runs the CI build: it changes to the
-  repo root and runs `docker build --build-arg CHECK_EPOCH="$epoch" .`, where
+  repo root and runs `docker build .`; the Gitea workflow calls it. Four further
-  `epoch` is a per-invocation nonce (see the `CHECK_EPOCH` rule below); the
+  scripts are our own extensions to the standard: `script/check` runs
-  Gitea workflow calls it. Four further scripts are our own extensions to the
+  `script/test`, `script/lint`, and `script/fmt-check`; `script/precommit` is
-  standard: `script/check` runs `script/test`, `script/lint`, and
+  what the git pre-commit hook runs, and it calls `script/check`;
-  `script/fmt-check`; `script/precommit` is what the git pre-commit hook runs,
+  `script/install-precommit` installs the git pre-commit hook (the `make hooks`
-  and it calls `script/check`; `script/install-precommit` installs the git
+  target shims to it); and `script/projectname` (literally that filename) simply
-  pre-commit hook (the `make hooks` target shims to it); and
+  outputs the project's name. Scripts that need the name call
-  `script/projectname` (literally that filename) simply outputs the project's
+  `script/projectname` — e.g. `script/docker` assembles its image tag from it —
-  name. Scripts that need the name call `script/projectname` — e.g.
+  so those scripts stay byte-identical across all repos. Repo-type-specific
-  `script/docker` assembles its image tag from it — so those scripts stay
+  pre-commit extras (e.g. `go mod tidy` verification in Go repos) belong in
-  byte-identical across all repos. Repo-type-specific pre-commit extras (e.g.
+  `script/precommit`, not in the hook itself. Model scripts are at
-  `go mod tidy` verification in Go repos) belong in `script/precommit`, not in
-  the hook itself. Model scripts are at
   `https://git.eeqj.de/sneak/prompts/raw/branch/main/script/<name>`. The README
   must document the provided scripts in an **Entrypoints** section (see the
   README requirements below).
@@ -92,70 +90,14 @@ style conventions are in separate documents:
   reading the Makefile.
 
 - Every repo should have a `Dockerfile`. All Dockerfiles must run `make check`
-  as a build step so the build fails if the branch is not green — which requires
+  as a build step so the build fails if the branch is not green. For non-server
-  `ARG CHECK_EPOCH` and its guard in every stage containing a check-running
+  repos, the Dockerfile should bring up a development environment and run
-  `RUN`, per the `CHECK_EPOCH` rule below. Without them a Dockerfile satisfies
+  `make check`. For server repos, `make check` should run as an early build
-  this criterion while its check layers are served from cache, so the build
+  stage before the final image is assembled. Dockerfiles install development
-  cannot fail on a branch that is not green. For non-server repos, the
+  prerequisites by running `script/bootstrap` rather than duplicating installs
-  Dockerfile should bring up a development environment and run `make check`. For
+  inline; COPY `script/` and the dependency manifests (`package.json` +
-  server repos, `make check` should run as an early build stage before the final
+  `yarn.lock`, `go.mod` + `go.sum`, etc.) before running it so the bootstrap
-  image is assembled. Dockerfiles install development prerequisites by running
+  layer stays cached until dependencies change.
-  `script/bootstrap` rather than duplicating installs inline; COPY `script/` and
-  the dependency manifests (`package.json` + `yarn.lock`, `go.mod` + `go.sum`,
-  etc.) before running it so the bootstrap layer stays cached until dependencies
-  change.
-
-- **Every check-running `RUN` must be cache-busted with `CHECK_EPOCH`.** Docker
-  invalidates a `COPY` layer only when the copied content changes, so on an
-  unchanged tree the `RUN make check` layer is served from cache, the suite
-  never runs, and the build still exits 0. A sub-second `docker build` reporting
-  success is a cache hit, not a result. The canonical form, in **every** stage
-  containing a check-running `RUN`:
-
-    ```dockerfile
-    ARG CHECK_EPOCH
-    RUN [ -n "$CHECK_EPOCH" ] || exit 1
-    RUN echo "check epoch: ${CHECK_EPOCH}" && make check
-    ```
-
-    and in both `script/cibuild` and `script/docker`:
-
-    ```sh
-    epoch="$(date +%s%N)$$"
-    docker build --build-arg CHECK_EPOCH="$epoch" .
-    ```
-
-    All four elements are load-bearing; none is optional, and each guards a
-    failure mode that otherwise fails green:
-    - `ARG` is stage-scoped, so a single declaration leaves the other check
-      stages frozen while the fix reviews as complete. Declare it in every stage
-      that runs checks, immediately above the first such `RUN`.
-    - Expand the value into the command. This makes the cache miss contractual
-      rather than dependent on BuildKit's handling of an unreferenced `ARG`, and
-      it puts the epoch in the build log. The guard is itself value-keyed, for
-      the same reason: it references `$CHECK_EPOCH`, so BuildKit renders the
-      epoch into that layer's description (rendered as
-      `RUN [ -n "<epoch>" ] || exit 1`) and re-runs it whenever the value
-      changes. Each stage therefore has two independent invalidation points, and
-      the guard always precedes the check `RUN`. Keep both: the expansion is
-      defence in depth, and it is what makes the epoch visible in the build
-      output.
-    - The `[ -n ... ]` guard is required: an unset `ARG` is empty, and empty is
-      a stable cache key, so without it a bare `docker build .` still produces
-      the false green. Failed steps are never cached, so the guard fails on
-      every such invocation, loudly. A bare `docker build .` failing is by
-      design.
-    - Assign `epoch=` on its own line, never inline in the `--build-arg`
-      argument: a failing command substitution inside an argument does not trip
-      `set -e`, so the inline form silently degrades to an empty constant. The
-      `$$` suffix is required because busybox `date` drops `%N` and exits 0, so
-      on an alpine host the epoch would degrade to second granularity and
-      concurrent invocations would collide.
-
-    This invalidates the check layers and everything after them while leaving
-    `go mod download`, `script/bootstrap`, and the pinned toolchain install
-    cached, so it does not push against the five-minute Docker build ceiling.
-    Blanket `--no-cache` also works but is wasteful and can blow that ceiling.
 
 - **Dockerfiles must use a separate lint stage for fail-fast feedback.** Go
   repos use a multistage build where linting runs in an independent stage based
@@ -177,9 +119,7 @@ style conventions are in separate documents:
     COPY go.mod go.sum ./
     RUN go mod download
     COPY . .
-    ARG CHECK_EPOCH
+    RUN make fmt-check
-    RUN [ -n "$CHECK_EPOCH" ] || exit 1
-    RUN echo "check epoch: ${CHECK_EPOCH}" && make fmt-check
     RUN make lint
 
     # Build stage
@@ -193,9 +133,7 @@ style conventions are in separate documents:
     COPY go.mod go.sum ./
     RUN go mod download
     COPY . .
-    ARG CHECK_EPOCH
+    RUN make test
-    RUN [ -n "$CHECK_EPOCH" ] || exit 1
-    RUN echo "check epoch: ${CHECK_EPOCH}" && make test
 
     ARG VERSION=dev
     RUN CGO_ENABLED=0 go build -trimpath \
@@ -216,16 +154,6 @@ style conventions are in separate documents:
       a stage dependency. BuildKit runs stages in parallel by default; without
       this line, the build stage would not wait for lint to finish and a lint
       failure might not fail the overall build.
-    - **Re-prove that ordering on a warm cache after adopting `CHECK_EPOCH`.**
-      The cache-bust turns this no-op `COPY` into a content-cache hit, so an
-      ordering guarantee established on a cold cache does not automatically
-      carry over; it has to be re-checked warm. This was re-proved in another
-      repo in the org that uses the same file-dependency trick (there with a
-      marker file in place of `go.sum`), and the ordering held. It has **not**
-      been verified in this repo, which is single-stage and has no lint stage to
-      order against. Any repo relying on a file-dependency trick for stage
-      ordering should re-check it warm after adopting the bust rather than
-      assuming this result transfers.
     - If the project uses `//go:embed` directives that reference build artifacts
       (e.g. a web frontend compiled in a separate stage), the lint stage must
       create placeholder files so the embed directives resolve. Example:
@@ -237,28 +165,11 @@ style conventions are in separate documents:
     - The build stage runs `make test` after compilation setup. Tests run in the
       build stage, not the lint stage, because they may require compiled
       artifacts or heavier dependencies.
-    - `ARG CHECK_EPOCH` appears in **both** stages, because `ARG` is
-      stage-scoped: declaring it only in the lint stage leaves `make test`
-      frozen at the last cached result. In each stage the guard sits immediately
-      below the `ARG` so a bare `docker build .` fails instead of reusing the
-      empty cache key, and the value is expanded into the first check `RUN` so
-      the cache miss does not rely on BuildKit's unreferenced-`ARG` handling.
-      Both of those lines reference `$CHECK_EPOCH`, so both are value-keyed:
-      each stage is invalidated at two independent points. The later `RUN`s in
-      the same stage need no expansion of their own: they are already
-      invalidated by their busted parent layer.
 
 - Every repo should have a Gitea Actions workflow (`.gitea/workflows/`) that
-  runs `script/cibuild` (which runs
+  runs `script/cibuild` (which runs `docker build .`) on push. Since the
-  `docker build --build-arg CHECK_EPOCH="$epoch" .`) on push. The Dockerfile
+  Dockerfile already runs `make check`, a successful build implies all checks
-  runs `make check`, so a successful build implies all checks pass — but that
+  pass.
-  implication holds **only** because of the `CHECK_EPOCH` cache-bust described
-  above. Without it, an unchanged tree serves the check layer from cache and the
-  build reports a green it never earned. A bare `docker build .` fails closed by
-  design, on the `[ -n "$CHECK_EPOCH" ]` guard; always go through
-  `script/cibuild` or `script/docker`. Never accept a `script/cibuild` pass as
-  evidence without confirming it ran: a sub-second wall time, or `CACHED` on the
-  check layer, means nothing was executed.
 
 - Use platform-standard formatters: `black` for Python, `prettier` for
   JS/CSS/Markdown/HTML, `go fmt` for Go. Always use default configuration with
@@ -331,39 +242,7 @@ style conventions are in separate documents:
   editor files (`.swp`, `*~`), language build artifacts, and `node_modules/`.
   Fetch the standard `.gitignore` from
   `https://git.eeqj.de/sneak/prompts/raw/branch/main/.gitignore` when setting up
-  a new repo. These patterns are written to `.gitignore`'s own semantics, in
+  a new repo.
-  which an unanchored pattern already matches at every depth. They are not a
-  `.dockerignore` and must not be transplanted into one unmodified — see the
-  next rule.
-
-- **`.dockerignore` does not use `.gitignore` semantics, and copying patterns
-  across unmodified leaves secrets in the build context.** Docker matches with
-  Go `filepath.Match`: `*` does not cross `/`, and a pattern without a leading
-  `**/` is anchored at the build-context root. A `.dockerignore` listing `.env`,
-  `*.pem` and `*.key` therefore excludes only the copies at the repository root;
-  `config/.env` and `certs/server.key` still reach the context and can land in
-  an image layer. That file is more dangerous than a short one with no secret
-  patterns at all, because it reads as solved and stops anyone looking. Give
-  every depth-independent pattern the `**/` prefix — `**/.env`, `**/.env.*`,
-  `**/*.pem`, `**/*.key`, `**/node_modules` — and leave only genuinely
-  root-anchored entries such as `.git` unprefixed. The inverse move is equally
-  wrong: never apply `**/` to `.gitignore`, where it is redundant and produces a
-  file that is wrong in a way that looks careful. Each file is written to its
-  own semantics; neither is derived from the other. Fetch the standard
-  `.dockerignore` from
-  `https://git.eeqj.de/sneak/prompts/raw/branch/main/.dockerignore` and extend
-  it with the repo's own host-built artifacts — a host `make build` that leaves
-  a compiled binary in the repo root puts that binary in the build context,
-  where `.gitignore` hides it from every git-based check.
-
-- **Verify `.dockerignore` by enumerating the image, not by reading the
-  patterns.** Plant files at the root _and_ at least two directories deep, build
-  a probe image that does `COPY . .`, and list what actually landed
-  (`docker run --rm --entrypoint find IMAGE /app`). Reading the patterns and
-  agreeing they look right is exactly what lets the root-only form through. The
-  `transferring context` size is not a substitute: a nested secret is a few
-  bytes, and BuildKit transfers only the delta from the previous build, so the
-  reported size describes the transfer and not the contents of the image.
 
 - **No build artifacts in version control.** Code-derived data (compiled
   bundles, minified output, generated assets) must never be committed to the
@@ -386,195 +265,6 @@ style conventions are in separate documents:
   commit-pinned via
   `go install github.com/golangci/golangci-lint/v2/cmd/golangci-lint@c0d3ddc9cf3faa61a4e378e879ece580256d76e5`.
 
-- **`script/bootstrap` in Go repos must install the pinned golangci-lint
-  whenever the installed version does not match the pin — not merely when the
-  binary is absent — and must then verify the install took effect by
-  re-resolving the binary through `PATH`.** The presence test
-  `if missing golangci-lint; then go install "$GOLANGCI_LINT_REF"; fi` is wrong:
-  it tests `PATH` presence and never version, so on any already-provisioned
-  machine the pin is inert and a version bump is a no-op. Meanwhile the
-  Dockerfile installs unconditionally into a clean image, so CI and local
-  silently disagree about what the linter even is. Observed consequences: a
-  local `make check` green while `make docker` rejected the same commit with six
-  `goconst` findings, and a container linter surfacing thirteen findings the
-  host run missed. A stale host linter does not merely fail to prove the tree is
-  clean — it hides findings only the container can see. This is a deliberate
-  departure from the node handling described above, which uses whatever node is
-  installed: the linter version is the specific thing being held equal between
-  host and container, so for it, presence is not enough.
-
-    Comparing versions is necessary but **not sufficient**, because the obvious
-    fix also fails green. `go install` writes to `GOBIN` (or `GOPATH/bin`) while
-    callers resolve `golangci-lint` through `PATH`. If a different binary
-    shadows it earlier in `PATH`, the install genuinely succeeds and changes
-    nothing any caller will ever see: bootstrap prints success and the next
-    `make lint` still runs the stale linter. That is worse than no fix, because
-    it converts a known-stale toolchain into one everyone believes is pinned.
-    The canonical form, placed in `script/bootstrap` after Go itself is present:
-
-    ```sh
-    # golangci-lint v2.12.2, 2026-05-06. GOLANGCI_LINT_VERSION must be exactly
-    # what `golangci-lint --version` prints for this ref; update both together.
-    GOLANGCI_LINT_VERSION="2.12.2"
-    GOLANGCI_LINT_REF="github.com/golangci/golangci-lint/v2/cmd/golangci-lint@c0d3ddc9cf3faa61a4e378e879ece580256d76e5"
-
-    # The version golangci-lint reports, resolved the way callers resolve it.
-    # Prints nothing when the binary is absent, exits non-zero, or prints
-    # something unparseable: all of those must read as "does not match".
-    # The capture is the whole version token, not just its numeric prefix.
-    # Stopping at the first `-` would make 2.12.2-rc1 compare equal to 2.12.2
-    # and skip the install, which is the defect this whole rule exists to close.
-    # The trailing `|| true` is required, not tidiness. Under `set -o pipefail`
-    # a non-zero --version would otherwise propagate out of the pipeline and
-    # kill the script through `set -e` before the diagnostic below is printed.
-    golangci_lint_version() {
-        command -v golangci-lint >/dev/null 2>&1 || return 0
-        golangci-lint --version 2>/dev/null | head -n 1 |
-            sed -n 's/.*has version v\{0,1\}\([0-9][^ ]*\).*/\1/p' || true
-    }
-
-    ensure_golangci_lint() {
-        if [ "$(golangci_lint_version)" = "$GOLANGCI_LINT_VERSION" ]; then
-            echo "bootstrap: golangci-lint $GOLANGCI_LINT_VERSION already installed"
-            return 0
-        fi
-        echo "bootstrap: installing golangci-lint $GOLANGCI_LINT_VERSION"
-        go install "$GOLANGCI_LINT_REF"
-
-        # go install writes to GOBIN (or GOPATH/bin); callers resolve through
-        # PATH. Re-resolve through PATH and assert the install took effect.
-        # `hash -r` is load-bearing: without it a shell that already resolved
-        # a stale golangci-lint answers from its own lookup cache, and this
-        # check false-fails with the shadowing message below.
-        hash -r 2>/dev/null || true
-        gcl_got="$(golangci_lint_version)"
-        if [ "$gcl_got" = "$GOLANGCI_LINT_VERSION" ]; then
-            echo "bootstrap: golangci-lint $GOLANGCI_LINT_VERSION installed," \
-                "and PATH resolves it"
-            return 0
-        fi
-        gcl_bin="$(go env GOBIN)"
-        [ -n "$gcl_bin" ] || gcl_bin="$(go env GOPATH)/bin"
-        # Strip a trailing slash: GOBIN=/x/ would otherwise make the
-        # "$gcl_bin"/* test below miss and misreport shadowing.
-        while :; do
-            case "$gcl_bin" in
-                */) gcl_bin="${gcl_bin%/}" ;;
-                *) break ;;
-            esac
-        done
-        gcl_found="$(command -v golangci-lint 2>/dev/null || true)"
-        echo "bootstrap: installed golangci-lint $GOLANGCI_LINT_VERSION into" \
-            "$gcl_bin, but that is not what callers will get." >&2
-        case "$gcl_found" in
-            "")
-                echo "bootstrap: PATH resolves no golangci-lint at all." \
-                    "Add $gcl_bin to PATH, then re-run bootstrap." >&2
-                ;;
-            "$gcl_bin"/*)
-                echo "bootstrap: PATH resolves $gcl_found, inside that same" \
-                    "directory, reporting version ${gcl_got:-unparseable}." \
-                    "Nothing is shadowing it, so the install itself did not" \
-                    "produce the pinned version: check that" \
-                    "GOLANGCI_LINT_VERSION matches GOLANGCI_LINT_REF." >&2
-                ;;
-            *)
-                echo "bootstrap: PATH resolves $gcl_found instead, reporting" \
-                    "version ${gcl_got:-unparseable}. Remove that binary or" \
-                    "put $gcl_bin earlier in PATH, then re-run bootstrap." >&2
-                ;;
-        esac
-        exit 1
-    }
-
-    # The definitions above are inert on their own; the call site is part of
-    # the canonical form. In a script/bootstrap that follows the "define all
-    # functions, then call main" convention, this line belongs inside main()
-    # next to the other ensure_* steps.
-    ensure_golangci_lint
-    ```
-
-    Four properties are load-bearing; each guards a failure mode that otherwise
-    fails green:
-    - **Compare the installed version against the pin**, never test presence.
-      This is what makes a version bump propagate to machines that already have
-      some golangci-lint. Compare the **whole** version token, exactly: a parser
-      that stops at the first `-` reports `2.12.2` for a host running
-      `2.12.2-rc1`, which compares equal to a `2.12.2` pin and skips the install
-      — the original defect, reintroduced through the comparison meant to fix
-      it.
-    - **After installing, re-resolve the binary the way callers resolve it** —
-      through `PATH`, not the path `go install` wrote to — and assert
-      `--version` reports the pin. When it does not, fail non-zero and name the
-      path `command -v` actually found, the version it reports, and the
-      directory the install wrote to. That is a condition a human has to fix by
-      hand, so bootstrap must not print success in it. Use `hash -r` first so
-      the shell does not answer from its own lookup cache. Diagnose the cause
-      from the resolved path rather than asserting one: only a path **outside**
-      the install directory is shadowing. When the resolved path is inside it,
-      nothing is shadowing and telling the operator to delete that binary or
-      reorder `PATH` sends them after a fault that does not exist.
-    - **A mis-parse must fall through to reinstall, never to a false match.**
-      Absent binary, non-zero exit, empty output, and unrecognised output all
-      yield an empty string, which compares unequal to the pin. The failure
-      direction is always a redundant install, never a skipped one.
-    - **Call it, and say so on success.** Two function definitions with no call
-      site are a silent no-op that reproduces the original defect exactly: exit
-      0, nothing installed, no output, stale linter still resolved. A success
-      path that prints nothing is byte-identical to that no-op — same exit
-      status, same empty output — so both success branches must print a
-      confirmation naming the version. In a change about undetectable no-ops,
-      "it printed nothing and exited 0" must not be the healthy signal.
-
-    Keep it POSIX sh: no bashisms, no arrays, no `[[`, no `grep -P`.
-
-    **On the hash-pinning rule.** `@c0d3ddc9cf3faa61a4e378e879ece580256d76e5` is
-    a commit hash, not a server-mutable version tag, and the go command verifies
-    the fetched module against the checksum database — the mechanism the
-    hash-pinning rule at the top of this document already names as acceptable
-    for Go modules. Note that `go install pkg@version` runs in module-aware mode
-    ignoring the `go.mod` in the current directory or any parent, so no repo
-    `go.sum` is consulted for this install; the checksum database is what
-    verifies it. The linter is a bootstrap prerequisite rather than part of any
-    repo's module graph, which is why the canonical form installs it by
-    commit-pinned ref instead of declaring it in `go.mod`. Whether a `go.mod`
-    tool dependency — which would pin the hash in a committed, reviewable file
-    instead — should replace this is an open decision, tracked at
-    [prompts#37](https://git.eeqj.de/sneak/prompts/issues/37).
-
-    **Keep `GOLANGCI_LINT_VERSION` and the ref in sync.** The ref is a hash and
-    carries no readable version, so the expected version is a separate string,
-    and it must be exactly what `--version` prints for that ref — the comparison
-    is an exact match on the whole version token. When the pinned commit carries
-    a release tag the go command resolves the hash to that tag, so the string is
-    simply the release number, `2.12.2` here. When it does not, the go command
-    falls back to a pseudo-version and the binary reports something like
-    `2.12.3-0.20260506110758-c0d3ddc9cf3f`; that compares exactly like any other
-    string, so it works, but it cannot be known without building the binary once
-    and reading `--version` off it. Prefer pins on tagged releases for that
-    reason — the expected string is then derivable from the ref — not because
-    the comparison cannot handle the alternative.
-
-    Because the comparison covers the whole token, a pre-release is never
-    confused with its release: a host carrying `2.12.2-rc1` against a `2.12.2`
-    pin compares unequal and gets reinstalled. This matters more than it looks,
-    because a pre-release tag is still a tag, so a rule requiring merely that
-    the pin be tagged would not catch it.
-
-    **Verifying a change to this logic requires a negative control run in an
-    environment where a shadowing binary exists earlier in `PATH` than the
-    install target.** Without that, the control passes against the naive
-    compare-then-install form as well and therefore proves nothing. Also check
-    the mis-parse direction by feeding it unparseable `--version` output and
-    confirming it reinstalls rather than reporting a match.
-
-    **Run those controls against the block as a consuming repo would adopt it**
-    — pasted into a `script/bootstrap`-shaped file that is then executed — not
-    by sourcing it and invoking the function yourself. Driving the function
-    directly tests something the artifact does not do, and it is exactly how a
-    missing call site passes every control while the adopted snippet does
-    nothing.
-
 - When pinning images or packages by hash, add a comment above the reference
   with the version and date (YYYY-MM-DD).
 

script/cibuild

@@ -1,20 +1,13 @@
 #!/bin/sh
-# script/cibuild: run the CI build. The Dockerfile runs script/check, but
+# script/cibuild: run the CI build. The Dockerfile runs script/check, so
-# that only proves anything because CHECK_EPOCH is a fresh nonce on every
+# a successful build implies all checks pass.
-# invocation: without it Docker serves the check layer from cache on an
-# unchanged tree and the build exits 0 without running the suite.
 set -eu
 
 ROOT="$(cd "$(dirname "$0")/.." && pwd -P)"
 
 main() {
     cd "$ROOT"
-    # Assign on its own line: a failing command substitution inside an
+    docker build .
-    # argument does not trip `set -e`, which would silently degrade the
-    # nonce to an empty constant. `$$` is required because busybox `date`
-    # drops %N without erroring.
-    epoch="$(date +%s%N)$$"
-    docker build --build-arg CHECK_EPOCH="$epoch" .
 }
 
 main "$@"

script/docker

@@ -1,9 +1,6 @@
 #!/bin/sh
 # script/docker: build the Docker image tagged with the project name.
-# Identical in all repos; the tag comes from script/projectname. The
+# Identical in all repos; the tag comes from script/projectname.
-# Dockerfile's checks only actually run because CHECK_EPOCH is a fresh
-# nonce on every invocation; without it a warm cache turns this into a
-# green that proves nothing.
 set -eu
 
 SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd -P)"
@@ -11,13 +8,7 @@ ROOT="$(cd "$SCRIPT_DIR/.." && pwd -P)"
 
 main() {
     cd "$ROOT"
-    # Assign on its own line: a failing command substitution inside an
+    docker build -t "$("$SCRIPT_DIR/projectname")" .
-    # argument does not trip `set -e`, which would silently degrade the
-    # nonce to an empty constant. `$$` is required because busybox `date`
-    # drops %N without erroring.
-    epoch="$(date +%s%N)$$"
-    docker build --build-arg CHECK_EPOCH="$epoch" \
-        -t "$("$SCRIPT_DIR/projectname")" .
 }
 
 main "$@"