The canonical .dockerignore was three lines -- .git, node_modules, .DS_Store
-- while the canonical Dockerfile does `COPY . .`, so a developer's local
.env, *.pem or *.key was shipped into the build context and could land in an
image layer. Nothing surfaced it because .gitignore covers those patterns, so
the files are invisible to every git-based check.
The obvious repair, copying .gitignore's secret patterns across, is worse than
the gap it closes. .dockerignore does not use .gitignore semantics: Docker
matches with moby/patternmatcher, which is filepath.Match semantics plus a `**`
extension compiled to a regexp. `*` does not cross `/`, and a pattern without
a leading `**/` is anchored at the build-context root. A file listing .env,
*.pem and *.key therefore reads as solved, reviews as solved, and protects
only the repository root, while config/.env and certs/server.key still ship.
The three-line file at least invited scrutiny; the transplanted form
manufactures confidence and stops anyone looking.
So every depth-independent pattern here carries the `**/` prefix and only
genuinely root-anchored entries stay unprefixed. `**/node_modules` fixes a
defect the three-line file had today for any nested node_modules,
independently of the secret exposure.
Coverage is not limited to the three patterns the issue names, because the
enumeration found more shapes reaching the image. `**/*.env` covers the
prod.env / local.env convention, which the .env and .env.* spellings miss
entirely; `.envrc` is a secrets file by direnv convention; *.p12 and *.pfx are
bundles carrying private keys; and id_rsa, id_dsa, id_ecdsa and id_ed25519 are
the extensionless SSH keys that were covered before only when someone happened
to append a .key suffix.
Matching is case-sensitive, so `**/*.key` does not match certs/SERVER.KEY,
which is reachable on the case-insensitive filesystems most laptops use.
Doubling each pattern with an ALL-CAPS twin is not the fix: measured against
the planted set it still ships certs/Server.Key and certs/Ca.Pem while reading
as though case were handled, which is this issue's failure mode restated in a
new place. The matcher supports character ranges, so every secret name is
written that way -- `**/*.[kK][eE][yY]`, `**/*.[pP][eE][mM]`,
`**/.[eE][nN][vV][rR][cC]`, `**/[iI][dD]_[rR][sS][aA]` and the rest. The
extensionless SSH keys and .envrc are folded for the same reason the
extensions are: on the very filesystems that make SERVER.KEY reachable, direnv
reads .ENVRC and ssh reads ID_RSA, so exempting them would have contradicted
the rule that justifies the folding. Since `*` matches the empty string,
`**/*.[eE][nN][vV]` already covers a bare .ENV and no separate literal .env
entry is needed; the literal one is gone rather than left to imply that case
is unhandled there.
Deliberately not covered: bare `key` and `pem` filenames, which no tool
produces and which collide with legitimate paths (a `**/key` pattern would
delete an internal/key/ package directory from the context); `**/id_*`, which
would match ordinary source such as id_generator.go and ID_MAP.go; and *.crt
and *.cer, which are public certificates rather than secrets and are sometimes
a legitimate build input. Each of those is planted as a positive control and
verified present in the image after the change.
The one predictable false positive is a committed env template: `**/*.env`
excludes example.env. The remedy travels with the file rather than living in a
review thread -- the header comment and the policy both say to re-include it
with a negation, `!docs/example.env`, and never to delete the pattern, which
would reopen the exposure for everything else it covers.
The OS and editor patterns are included on their own merits rather than by
mirroring .gitignore. None of them is ever a build input, and editor state in
particular churns under a developer's hands, so each one is a source of
`COPY . .` invalidation carrying no information about the source tree. Now
that the checks are keyed on CHECK_EPOCH rather than on accidental context
churn, there is no reason left to keep churn in the context. Language build
artifacts are deliberately absent: they are per-repo, and the file's header
comment tells consuming repos to add their own host-built binaries, which is
the case that actually bites -- a host `make build` drops a multi-megabyte
artifact into the context where .gitignore hides it from every git-based
check. That comment gives the anchored form explicitly, `/myapp` rather than
`**/myapp`, because the prefixed spelling also matches cmd/myapp/ and deletes
the package directory. The header comment is the only part of this guidance a
consuming repo actually receives, since it is vendored with the file.
.gitignore is untouched. Its semantics are the inverse: an unanchored pattern
already matches at any depth, so `**/`-prefixing it produces a file that is
wrong in a way that looks careful. That asymmetry is why "derive one from the
other" was the wrong instruction, and it is now written down in
REPO_POLICIES.md in both directions, together with the case-sensitivity rule,
the negation remedy, and the requirement to verify by enumerating the image
rather than by reading the patterns. Every consuming repo inherits
.dockerignore by copy, so the trap has to live where the next person looks,
not only be fixed once here. Both repo checklists gain the same requirements.
Verified by planting 130 secret files -- twenty-six name shapes, including
every capitalisation of .env, .env.*, prod.env, .envrc, id_rsa, id_ed25519,
ca.pem, server.key, bundle.p12 and bundle.pfx, at five depths from the context
root to a/b/c -- alongside nine positive controls, then building a standalone
probe image doing `COPY . .` and listing what actually landed inside it. The
patterns as first written leaked 35 of the 130: every .ENVRC, .Envrc, ID_RSA,
Id_Rsa, ID_ED25519, .ENV.PRODUCTION and .Env.Local, at all five depths. A
lowercase-only control leaks 80, so the probe is not vacuous. After this
change: zero, with all nine controls still present, including
internal/ID_MAP.go and certs/CA.CRT.
Transferred-context size is recorded but load-bearing on nothing: an earlier
run reported 2.18kB transferred while 43 files, five of them secrets, were in
the image. BuildKit transfers only the delta from the previous build, so the
number describes the transfer and not the contents.
Planted files were removed and their absence confirmed against the filesystem
rather than against `git status`, which could not have seen them.
`make docker` re-run after the change: the check layer executed rather than
being served from cache, so the CHECK_EPOCH verification still holds under the
altered build context.
2026-08-09 16:42:00 +00:00
5 changed files with 162 additions and 3 deletions
@@ -331,7 +331,64 @@ style conventions are in separate documents:
editor files (`.swp`, `*~`), language build artifacts, and `node_modules/`.
Fetch the standard `.gitignore` from
`https://git.eeqj.de/sneak/prompts/raw/branch/main/.gitignore` when setting up
a new repo.
a new repo. These patterns are written to `.gitignore`'s own semantics, in
which an unanchored pattern already matches at every depth. They are not a
`.dockerignore` and must not be transplanted into one unmodified — see the
next rule.
- **`.dockerignore` does not use `.gitignore` semantics, and copying patterns
across unmodified leaves secrets in the build context.** Docker matches with
`moby/patternmatcher`: Go `filepath.Match` semantics plus a `**` extension,
compiled to a regexp — plain `filepath.Match` has no `**` at all. So `*` does
not cross `/`, and a pattern without a leading `**/` is anchored at the
build-context root. A `.dockerignore` listing `.env`, `*.pem` and `*.key`
therefore excludes only the copies at the repository root; `config/.env` and
`certs/server.key` still reach the context and can land in an image layer.
That file is more dangerous than a short one with no secret patterns at all,
because it reads as solved and stops anyone looking. Give every
depth-independent pattern the `**/` prefix — `**/node_modules`,
`**/.DS_Store`, and the secret patterns in the canonical file, which are
additionally case-folded per the rule below — and leave only genuinely
root-anchored entries such as `.git` unprefixed. The inverse move is equally
wrong: never apply `**/` to `.gitignore`, where it is redundant and produces a
file that is wrong in a way that looks careful. Each file is written to its
own semantics; neither is derived from the other. Fetch the standard
`.dockerignore` from
`https://git.eeqj.de/sneak/prompts/raw/branch/main/.dockerignore` and extend
it with the repo's own host-built artifacts — a host `make build` that leaves
a compiled binary in the repo root puts that binary in the build context,
where `.gitignore` hides it from every git-based check. Write that binary
anchored, `/myapp` and never `**/myapp`: the prefixed form also matches
`cmd/myapp/` and deletes the package directory from the context.
- **`.dockerignore` matching is case-sensitive, so cover capitalisation with
character classes rather than by doubling patterns.** `**/*.key` does not
match `certs/SERVER.KEY`, which is reachable on the case-insensitive
filesystems most laptops use. Adding an ALL-CAPS twin for each pattern is not
the fix: it still misses `Server.Key` and `Ca.Pem` while reading as though
case were handled — the same manufactured confidence as the root-anchored
form. The matcher supports character ranges, so one line covers every
spelling: `**/*.[kK][eE][yY]`, `**/*.[pP][eE][mM]`. Apply this to every secret
name, not only to extensions: the extensionless SSH keys and `.envrc` need it
for the same reason, since on the very filesystems that make `SERVER.KEY`
reachable, direnv reads `.ENVRC` and ssh reads `ID_RSA`. Note that `*` matches
the empty string, so `**/*.[eE][nN][vV]` already covers a bare `.ENV` and no
separate literal `.env` entry is needed.
- **A pattern that also catches something the build needs is re-included with a
negation, not deleted.** The canonical `**/*.[eE][nN][vV]` excludes a
committed env template such as `example.env`; a repo whose build genuinely
reads one adds `!docs/example.env` after the pattern. Deleting the pattern
instead reopens the exposure for every other file it covers.
- **Verify `.dockerignore` by enumerating the image, not by reading the
patterns.** Plant files at the root _and_ at least two directories deep, build
a probe image that does `COPY . .`, and list what actually landed
(`docker run --rm --entrypoint find IMAGE /app`). Reading the patterns and
agreeing they look right is exactly what lets the root-only form through. The
`transferring context` size is not a substitute: a nested secret is a few
bytes, and BuildKit transfers only the delta from the previous build, so the
reported size describes the transfer and not the contents of the image.
- **No build artifacts in version control.** Code-derived data (compiled
bundles, minified output, generated assets) must never be committed to the
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
