make fmt and make fmt-check cover Markdown with prettier (closes #39)

script/fmt now runs go fmt and then prettier --write on every Markdown
file; script/fmt-check runs the gofmt check and then prettier --check.
prettier is pinned in package.json and yarn.lock, configured in
.prettierrc with four-space indents and prose wrapped at 80 columns,
all copied from the sneak/prompts templates. script/bootstrap installs
node through a hash-verified nvm archive when it is missing, yarn at a
pinned version, and the yarn dependencies. README.md is reformatted by
make fmt, and its Entrypoints section says what fmt, fmt-check and
bootstrap now cover.

Model: opus-5-5

Dockerfile

@@ -17,8 +17,7 @@ COPY . .
 RUN golangci-lint run --config .golangci.yml ./...
 
 # Test phase
-# golang:1.26-alpine, 2026-09-07. It carries Go 1.26.8, the version
-# script/bootstrap installs on the host; change both together.
+# golang:1.26-alpine, 2026-09-07
 FROM golang@sha256:ce864e7223ac17b1775e6fd0b4c0db580c2eb50e7953a427916379e4b92a1628 AS test
 
 # -race needs cgo, and cgo needs a C toolchain.

Makefile

@@ -5,9 +5,6 @@
 VERSION := $(shell git describe --tags --always --dirty 2>/dev/null || echo dev)
 LDFLAGS := -s -w -X 'sneak.berlin/go/keyfunc/internal/cli.Version=$(VERSION)'
 
-# Where script/bootstrap installs Go; it cannot put it on our PATH.
-export PATH := $(HOME)/.local/go/bin:$(PATH)
-
 .PHONY: default bootstrap setup build test lint fmt fmt-check check \
 	docker cibuild hooks clean
 

README.md

@@ -281,23 +281,11 @@ The repo adheres to the
 standard: most Makefile targets are thin shims over an executable in `script/`
 (`build` and `clean` are the exceptions).
 
-- `script/bootstrap` installs, idempotently, everything needed to build and
-  develop apart from Docker, which it only warns about when it is missing, and
-  the linter, which only runs inside Docker. In this order:
-    - git and make from nix, apt, brew or apk, and from there too curl and bash
-      when a later step needs them;
-    - Go at the version the `Dockerfile`'s Go image carries, from the official
-      release archive at go.dev (checked against a sha256 in the script) into
-      `~/.local/go`, unless the `go` first on the `PATH` already is that
-      version; then the Go modules. `script/bootstrap` itself, `script/fmt`,
-      `script/fmt-check`, `script/precommit` and the `Makefile` put
-      `~/.local/go/bin` first on their `PATH`, so they use that Go;
-    - node: an installed one is used as it is, otherwise a pinned one is
-      installed through nvm, which, when it is missing, comes from its release
-      archive, checked against a sha256;
-    - yarn: an installed one is used as it is, otherwise the pinned version
-      through corepack, or through npm where there is no corepack;
-    - the pinned prettier, through yarn.
+- `script/bootstrap` installs everything needed to build and develop (git, make,
+  Go, node and yarn), idempotently, from nix, apt, brew or apk, with node at a
+  pinned version through nvm when it is not already installed; it then installs
+  the pinned prettier with yarn. It does not install the linter, which only runs
+  inside Docker.
 - `script/setup` prepares a fresh clone: it runs `bootstrap`, then installs the
   git pre-commit hook.
 - `script/projectname` prints the project name; other scripts call it so they
@@ -311,8 +299,8 @@ standard: most Makefile targets are thin shims over an executable in `script/`
 - `script/fmt` formats in place: the Go source with `go fmt`, then every
   Markdown file with prettier (four-space indents, prose wrapped at 80 columns).
 - `script/fmt-check` checks the same files the same way without writing, failing
-  if anything is unformatted. Both need the node, yarn and prettier that
-  `bootstrap` installs.
+  if anything is unformatted. Both need the node and yarn that `bootstrap`
+  installs.
 - `script/check` runs `test`, `lint` and `fmt-check` and changes no files.
 - `script/docker` builds the Docker image, uncached, tagged with the project
   name and stamped with the version `git describe` gives on the host. The image

script/bootstrap

@@ -3,28 +3,16 @@
 # repo. Idempotent: every install is guarded by a check, so tools that
 # are already there are left alone. Base tooling comes from nix, apt,
 # brew, or apk, detected in that order, and nothing is assumed to be
-# present. Go is installed at the version the Dockerfile's Go image
-# carries, from the official release archive, into ~/.local/go. Node is
-# used directly if installed; otherwise it is installed at a pinned
-# version via nvm (installing nvm itself first, from a hash-verified
-# release archive, never curl | sh). The linter is not installed here:
-# linting and testing run only as phases of the Dockerfile, so Docker is
-# what is needed for them, and that is checked for rather than
-# installed.
+# present. Node is used directly if installed; otherwise it is installed
+# at a pinned version via nvm (installing nvm itself first, from a
+# hash-verified release archive, never curl | sh). The linter is not
+# installed here: linting and testing run only as phases of the
+# Dockerfile, so Docker is what is needed for them, and that is checked
+# for rather than installed.
 set -eu
 
 ROOT="$(cd "$(dirname "$0")/.." && pwd -P)"
 
-# Must match the Go in the Dockerfile's golang image; the sha256 of each
-# archive is in install_go.
-GO_VERSION="1.26.8"
-
-# This script cannot change its caller's PATH, so script/fmt,
-# script/fmt-check, script/precommit and the Makefile put this directory
-# first on their own PATH, as is done here.
-GO_DIR="$HOME/.local/go"
-PATH="$GO_DIR/bin:$PATH"
-
 # Pinned versions, 2026-07-06
 NODE_VERSION="22.17.0"
 NVM_VERSION="0.40.3"
@@ -54,9 +42,6 @@ detect_pkgmgr() {
         if [ "$(id -u)" != "0" ]; then
             SUDO="sudo"
         fi
-        # This runs once, before the first install: a fresh host or
-        # runner image has no package lists yet.
-        $SUDO apt-get update
     fi
 }
 
@@ -90,52 +75,6 @@ verify_sha256() {
     fi
 }
 
-# True when the go first on PATH reports exactly GO_VERSION. No go, a go
-# that fails, or any other output is a mismatch.
-go_version_matches() {
-    out="$(go version 2>/dev/null)" || return 1
-    case "$out" in
-        "go version go$GO_VERSION "*) return 0 ;;
-        *) return 1 ;;
-    esac
-}
-
-install_go() {
-    # sha256 of the go1.26.8 archives at https://go.dev/dl/, 2026-10-04
-    case "$(uname -s)-$(uname -m)" in
-        Linux-x86_64)
-            platform="linux-amd64"
-            sha256="d0f743b33e8d8945e6b1f432edd15785c70507121d6e2a723b21285eddf8b57b"
-            ;;
-        Linux-aarch64)
-            platform="linux-arm64"
-            sha256="211ffced9dcb9633a55eac6364816ec0ddd951389a740e88fa8b3337971bdda0"
-            ;;
-        Darwin-x86_64)
-            platform="darwin-amd64"
-            sha256="186be014105aa6542b767d2c6ed5cca10a0214bdff809ef1724022a8c7894150"
-            ;;
-        Darwin-arm64)
-            platform="darwin-arm64"
-            sha256="a012b25b571bd0138a03dcd25375ceba866fe5ca822f426d2c66a4de56fd3f4b"
-            ;;
-        *)
-            echo "bootstrap: no Go archive pinned for $(uname -s) $(uname -m)" >&2
-            exit 1
-            ;;
-    esac
-    if missing curl; then pkg_install curl curl curl curl; fi
-    tmp="$(mktemp -d)"
-    curl -fsSL -o "$tmp/go.tar.gz" \
-        "https://go.dev/dl/go${GO_VERSION}.${platform}.tar.gz"
-    verify_sha256 "$tmp/go.tar.gz" "$sha256"
-    # An archive unpacked over an older Go leaves a broken tree.
-    rm -rf "$GO_DIR"
-    mkdir -p "$GO_DIR"
-    tar -xzf "$tmp/go.tar.gz" -C "$GO_DIR" --strip-components=1
-    rm -rf "$tmp"
-}
-
 # nvm is a bash script; run a command in a bash with nvm loaded
 nvm_sh() {
     bash -c ". \"\$HOME/.nvm/nvm.sh\" && $*"
@@ -189,16 +128,7 @@ main() {
 
     if missing git; then pkg_install git git git git; fi
     if missing make; then pkg_install gnumake make make make; fi
-
-    if ! go_version_matches; then
-        install_go
-        hash -r
-        if ! go_version_matches; then
-            echo "bootstrap: $(command -v go) is not go$GO_VERSION after installing it" >&2
-            exit 1
-        fi
-    fi
-    go version
+    if missing go; then pkg_install go golang go go; fi
 
     go mod download
 

script/fmt

@@ -5,9 +5,6 @@ set -eu
 
 ROOT="$(cd "$(dirname "$0")/.." && pwd -P)"
 
-# Where script/bootstrap installs Go; it cannot put it on our PATH.
-PATH="$HOME/.local/go/bin:$PATH"
-
 # Must match the pin in script/bootstrap.
 NODE_VERSION="22.17.0"
 

script/fmt-check

@@ -5,9 +5,6 @@ set -eu
 
 ROOT="$(cd "$(dirname "$0")/.." && pwd -P)"
 
-# Where script/bootstrap installs Go; it cannot put it on our PATH.
-PATH="$HOME/.local/go/bin:$PATH"
-
 # Must match the pin in script/bootstrap.
 NODE_VERSION="22.17.0"
 

script/precommit

@@ -7,9 +7,6 @@ set -eu
 SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd -P)"
 ROOT="$(cd "$SCRIPT_DIR/.." && pwd -P)"
 
-# Where script/bootstrap installs Go; it cannot put it on our PATH.
-PATH="$HOME/.local/go/bin:$PATH"
-
 main() {
     cd "$ROOT"
     go mod tidy