diff --git a/ubuntu-makevm/install.sh b/ubuntu-makevm/install.sh index 40678f0..e22ceab 100644 --- a/ubuntu-makevm/install.sh +++ b/ubuntu-makevm/install.sh @@ -1,12 +1,15 @@ #!/bin/bash +#VAR="ubuntu18.04" +VAR="generic" + virt-install \ --name $VMNAME \ --ram 32768 \ ---disk path=$DISK_DIR/$VMNAME.qcow2,size=20 \ +--disk path=$DISK_DIR/$VMNAME.qcow2,size=1000 \ --vcpus 8 \ --os-type linux \ ---os-variant generic \ +--os-variant "$VAR" \ --network bridge=virbr0 \ --graphics none \ --console pty,target_type=serial \ diff --git a/ubuntu-makevm/preseed-examples/preseed-one.cfg b/ubuntu-makevm/preseed-examples/preseed-one.cfg new file mode 100644 index 0000000..e905b50 --- /dev/null +++ b/ubuntu-makevm/preseed-examples/preseed-one.cfg @@ -0,0 +1,89 @@ +### Preseed for Ubuntu 18.04 +# Derived from: https://help.ubuntu.com/lts/installation-guide/example-preseed.txt +# Derived again from https://gist.github.com/CalvinHartwell/f2d7f5dedbfee2d7d47c583539a10859 + +d-i auto-install/enable boolean true + +d-i debian-installer/language string en +d-i debian-installer/locale string en_US.UTF-8 +d-i debian-installer/country string US +d-i keyboard-configuration/xkb-keymap select US + +d-i /choose_interface select auto +# d-i netcfg/hostname string device +d-i netcfg/get_hostname string unassigned-hostname +d-i netcfg/get_domain string unassigned-domain +d-i hw-detect/load_firmware boolean true + +### Account setup +d-i passwd/root-login boolean true +d-i passwd/root-password-crypted password !! +d-i passwd/make-user boolean false + +d-i clock-setup/utc boolean true +d-i time/zone string UTC +d-i clock-setup/ntp boolean true + +d-i clock-setup/ntp-server string 10.100.202.175 + +d-i partman-auto/disk string /dev/sda +d-i partman-auto/method string lvm +d-i partman-auto/choose_recipe select atomic +d-i partman/default_filesystem string ext4 +d-i partman-lvm/device_remove_lvm boolean true +d-i partman-md/device_remove_md boolean true +d-i partman-lvm/confirm boolean true +d-i partman/confirm_write_new_label boolean true +d-i partman/choose_partition select finish +d-i partman/confirm boolean true +d-i partman/confirm_nooverwrite boolean true +d-i partman-md/device_remove_md boolean true +d-i partman-lvm/device_remove_lvm boolean true +d-i partman-lvm/device_remove_lvm_span boolean true +#d-i partman-auto-lvm/new_vg_name string vg-root +#d-i partman-auto-lvm/guided_size string max + +### Grub +d-i grub-installer/only_debian boolean true +d-i grub-installer/with_other_os boolean true + +### Base system installation +d-i base-installer/install-recommends boolean true +d-i base-installer/kernel/image string linux-generic +d-i debconf debconf/frontend select Noninteractive + +d-i mirror/http/hostname string 10.100.202.204 +d-i mirror/http/directory string /ubuntu +d-i mirror/http/mirror select 10.100.202.204 + +d-i passwd/root-password password changeme +d-i passwd/root-password-again password changeme + +d-i user-setup/encrypt-home boolean false + + +### Package selection +d-i tasksel/first multiselect none +d-i pkgsel/upgrade select full-upgrade +d-i pkgsel/include string openssh-server \ + vim \ + byobu \ + git \ + tmux \ + build-essential \ + open-vm-tools \ + telnet \ + wget \ + curl \ + python + +#d-i preseed/late_command string \ +# in-target sh -c 'mkdir -p --mode=0700 /root/.ssh'; \ +# in-target sh -c 'curl https://sneak.cloud/authorized_keys > /root/.ssh/authorized_keys'; \ +# in-target sh -c 'chmod 0600 /root/.ssh/authorized_keys'; \ +# in-target sh -c 'echo "IPv4: \\\4" >> /etc/issue && echo "IPv6: \\\6" >> /etc/issue && echo "" >> /etc/issue'; + +d-i debian-installer/splash boolean false + +# reboot: +d-i finish-install/reboot_in_progress note diff --git a/ubuntu-makevm/preseed-examples/preseed-two.cfg b/ubuntu-makevm/preseed-examples/preseed-two.cfg new file mode 100644 index 0000000..e59dbb1 --- /dev/null +++ b/ubuntu-makevm/preseed-examples/preseed-two.cfg @@ -0,0 +1,164 @@ +d-i auto-install/enable boolean true + +d-i debian-installer/language string en +d-i debian-installer/locale string en_US.UTF-8 +d-i debian-installer/country string US +d-i keyboard-configuration/xkb-keymap select US + + +### Network configuration +d-i netcfg/choose_interface select auto +d-i netcfg/hostname string device +d-i netcfg/get_hostname string device +d-i netcfg/get_domain string unnamed +d-i hw-detect/load_firmware boolean true + +### Mirror settings +d-i mirror/country string manual +d-i mirror/http/hostname string archive.ubuntu.com +d-i mirror/http/directory string /ubuntu +d-i mirror/http/proxy string + +### Account setup +d-i passwd/root-login boolean true +# 'changeme': +d-i passwd/root-password-crypted password $6$wocSE5WsZK$s1Xp/irRKXtKti9C93mlvD5kNsSSFuBc58nqU2A864j5RMHoJk5ZmnoLgZ.s9QCcrD6NUPqnqu3CrIx42v3Pt. +d-i passwd/make-user boolean false + +# The root password is disabled by default. In case you want to use a root +# password, please generate a password with the following command +# printf "please-change-password" | mkpasswd -s -m sha-512 +# and update the passwd/root-password-crypted variable accordingly. Furthermore +# you need to remove the call to "usermod" below. + +### Clock and time zone setup +d-i clock-setup/utc boolean true +d-i time/zone string UTC +d-i clock-setup/ntp boolean true +d-i clock-setup/ntp-server string ntp.ubuntu.com + +### Partitioning +d-i partman-auto/method string lvm +d-i partman-auto-lvm/guided_size string max +d-i partman-lvm/device_remove_lvm boolean true +d-i partman-lvm/confirm boolean true +d-i partman-lvm/confirm_nooverwrite boolean true +d-i partman-auto-lvm/new_vg_name string main +d-i partman-md/device_remove_md boolean true +d-i partman-md/confirm boolean true +d-i partman-partitioning/confirm_write_new_label boolean true +d-i partman/choose_partition select finish +d-i partman/confirm boolean true +d-i partman/confirm_nooverwrite boolean true +d-i partman-basicmethods/method_only boolean false + +### GPT +d-i partman-basicfilesystems/choose_label string gpt +d-i partman-basicfilesystems/default_label string gpt +d-i partman-partitioning/choose_label string gpt +d-i partman-partitioning/default_label string gpt +d-i partman/choose_label string gpt +d-i partman/default_label string gpt + +### EFI +d-i partman-efi/non_efi_system boolean true + +### Grub +d-i grub-installer/only_debian boolean true +d-i grub-installer/with_other_os boolean true + +### Disk layout + +# Keep 25% free space +d-i partman-auto/expert_recipe string \ + boot-root :: \ + 1 1 1 free \ + $bios_boot{ } \ + method{ biosgrub } \ + . \ + 256 256 256 fat32 \ + $primary{ } \ + $iflabel{ gpt } \ + $reusemethod{ } \ + method{ efi } format{ } \ + mountpoint{ /boot/efi } \ + . \ + 512 512 512 ext4 \ + $primary{ } \ + $bootable{ } \ + method{ format } format{ } \ + use_filesystem{ } filesystem{ ext4 } \ + mountpoint{ /boot } \ + . \ + 1024 102400000 1000000000 ext4 \ + $lvmok{ } \ + method{ format } format{ } \ + use_filesystem{ } filesystem{ ext4 } \ + mountpoint{ / } \ + lv_name{ root } \ + . \ + 256 25600000 1000000000 ext4 \ + $lvmok{ } \ + method{ keep } \ + lv_name{ placeholder } \ + . \ + 200% 200% 200% linux-swap \ + $lvmok{ } \ + method{ swap } format{ } \ + lv_name{ swap } \ + . + +# Use entire disk +#d-i partman-auto/expert_recipe string \ +# boot-root :: \ +# 1 1 1 free \ +# $bios_boot{ } \ +# method{ biosgrub } \ +# . \ +# 256 256 256 fat32 \ +# $primary{ } \ +# $iflabel{ gpt } \ +# $reusemethod{ } \ +# method{ efi } format{ } \ +# mountpoint{ /boot/efi } \ +# . \ +# 512 512 512 ext4 \ +# $primary{ } \ +# $bootable{ } \ +# method{ format } format{ } \ +# use_filesystem{ } filesystem{ ext4 } \ +# mountpoint{ /boot } \ +# . \ +# 1024 102400000 1000000000 ext4 \ +# $lvmok{ } \ +# method{ format } format{ } \ +# use_filesystem{ } filesystem{ ext4 } \ +# mountpoint{ / } \ +# lv_name{ root } \ +# . \ +# 200% 200% 200% linux-swap \ +# $lvmok{ } \ +# method{ swap } format{ } \ +# lv_name{ swap } \ +# . + +### Base system installation +d-i base-installer/install-recommends boolean true +d-i base-installer/kernel/image string linux-generic + +d-i mirror/http/hostname string 10.100.202.204 +d-i mirror/http/directory string /ubuntu +d-i mirror/http/mirror select 10.100.202.204 + +### Package selection +d-i tasksel/first multiselect none +d-i pkgsel/include string openssh-server python +d-i pkgsel/upgrade select full-upgrade +#d-i pkgsel/update-policy select unattended-upgrades + +d-i debian-installer/splash boolean false +d-i cdrom-detect/eject boolean true + +### Shutdown machine +d-i finish-install/reboot_in_progress note +d-i debian-installer/exit/poweroff boolean true diff --git a/ubuntu-makevm/preseed-examples/preseed.dist b/ubuntu-makevm/preseed-examples/preseed.dist new file mode 100644 index 0000000..5868e4c --- /dev/null +++ b/ubuntu-makevm/preseed-examples/preseed.dist @@ -0,0 +1,493 @@ +#### Contents of the preconfiguration file (for stretch) +### Localization +# Preseeding only locale sets language, country and locale. +d-i debian-installer/locale string en_US + +# The values can also be preseeded individually for greater flexibility. +#d-i debian-installer/language string en +#d-i debian-installer/country string NL +#d-i debian-installer/locale string en_GB.UTF-8 +# Optionally specify additional locales to be generated. +#d-i localechooser/supported-locales multiselect en_US.UTF-8, nl_NL.UTF-8 + +# Keyboard selection. +# Disable automatic (interactive) keymap detection. +d-i console-setup/ask_detect boolean false +d-i keyboard-configuration/xkb-keymap select us +# To select a variant of the selected layout: +#d-i keyboard-configuration/xkb-keymap select us(dvorak) +# d-i keyboard-configuration/toggle select No toggling + +### Network configuration +# Disable network configuration entirely. This is useful for cdrom +# installations on non-networked devices where the network questions, +# warning and long timeouts are a nuisance. +#d-i netcfg/enable boolean false + +# netcfg will choose an interface that has link if possible. This makes it +# skip displaying a list if there is more than one interface. +d-i netcfg/choose_interface select auto + + + +# To set a different link detection timeout (default is 3 seconds). +# Values are interpreted as seconds. +#d-i netcfg/link_wait_timeout string 10 + +# If you have a slow dhcp server and the installer times out waiting for +# it, this might be useful. +#d-i netcfg/dhcp_timeout string 60 +#d-i netcfg/dhcpv6_timeout string 60 + +# If you prefer to configure the network manually, uncomment this line and +# the static network configuration below. +#d-i netcfg/disable_autoconfig boolean true + +# If you want the preconfiguration file to work on systems both with and +# without a dhcp server, uncomment these lines and the static network +# configuration below. +#d-i netcfg/dhcp_failed note +#d-i netcfg/dhcp_options select Configure network manually + +# Static network configuration. +# +# IPv4 example +#d-i netcfg/get_ipaddress string 192.168.1.42 +#d-i netcfg/get_netmask string 255.255.255.0 +#d-i netcfg/get_gateway string 192.168.1.1 +#d-i netcfg/get_nameservers string 192.168.1.1 +#d-i netcfg/confirm_static boolean true +# +# IPv6 example +#d-i netcfg/get_ipaddress string fc00::2 +#d-i netcfg/get_netmask string ffff:ffff:ffff:ffff:: +#d-i netcfg/get_gateway string fc00::1 +#d-i netcfg/get_nameservers string fc00::1 +#d-i netcfg/confirm_static boolean true + +# Any hostname and domain names assigned from dhcp take precedence over +# values set here. However, setting the values still prevents the questions +# from being shown, even if values come from dhcp. +d-i netcfg/get_hostname string unassigned-hostname +d-i netcfg/get_domain string unassigned-domain + +# If you want to force a hostname, regardless of what either the DHCP +# server returns or what the reverse DNS entry for the IP is, uncomment +# and adjust the following line. +#d-i netcfg/hostname string somehost + +# Disable that annoying WEP key dialog. +d-i netcfg/wireless_wep string +# The wacky dhcp hostname that some ISPs use as a password of sorts. +#d-i netcfg/dhcp_hostname string radish + +# If non-free firmware is needed for the network or other hardware, you can +# configure the installer to always try to load it, without prompting. Or +# change to false to disable asking. +#d-i hw-detect/load_firmware boolean true + +### Network console +# Use the following settings if you wish to make use of the network-console +# component for remote installation over SSH. This only makes sense if you +# intend to perform the remainder of the installation manually. +#d-i anna/choose_modules string network-console +#d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key +#d-i network-console/password password r00tme +#d-i network-console/password-again password r00tme +# Use this instead if you prefer to use key-based authentication +#d-i network-console/authorized_keys_url http://host/authorized_keys + +### Mirror settings +# If you select ftp, the mirror/country string does not need to be set. +#d-i mirror/protocol string ftp +d-i mirror/country string manual +d-i mirror/http/hostname string archive.ubuntu.com +d-i mirror/http/directory string /ubuntu +d-i mirror/http/proxy string + +# Alternatively: by default, the installer uses CC.archive.ubuntu.com where +# CC is the ISO-3166-2 code for the selected country. You can preseed this +# so that it does so without asking. +#d-i mirror/http/mirror select CC.archive.ubuntu.com + +# Suite to install. +#d-i mirror/suite string stretch +# Suite to use for loading installer components (optional). +#d-i mirror/udeb/suite string stretch +# Components to use for loading installer components (optional). +#d-i mirror/udeb/components multiselect main, restricted + +### Account setup +# Skip creation of a root account (normal user account will be able to +# use sudo). The default is false; preseed this to true if you want to set +# a root password. +#d-i passwd/root-login boolean false +# Alternatively, to skip creation of a normal user account. +#d-i passwd/make-user boolean false + +# Root password, either in clear text +#d-i passwd/root-password password r00tme +#d-i passwd/root-password-again password r00tme +# or encrypted using a crypt(3) hash. +#d-i passwd/root-password-crypted password [crypt(3) hash] + +# To create a normal user account. +#d-i passwd/user-fullname string Ubuntu User +#d-i passwd/username string ubuntu +# Normal user's password, either in clear text +#d-i passwd/user-password password insecure +#d-i passwd/user-password-again password insecure +# or encrypted using a crypt(3) hash. +#d-i passwd/user-password-crypted password [crypt(3) hash] +# Create the first user with the specified UID instead of the default. +#d-i passwd/user-uid string 1010 +# The installer will warn about weak passwords. If you are sure you know +# what you're doing and want to override it, uncomment this. +#d-i user-setup/allow-password-weak boolean true + +# The user account will be added to some standard initial groups. To +# override that, use this. +#d-i passwd/user-default-groups string audio cdrom video + +# Set to true if you want to encrypt the first user's home directory. +d-i user-setup/encrypt-home boolean false + +### Clock and time zone setup +# Controls whether or not the hardware clock is set to UTC. +d-i clock-setup/utc boolean true + +# You may set this to any valid setting for $TZ; see the contents of +# /usr/share/zoneinfo/ for valid values. +d-i time/zone string US/Eastern + +# Controls whether to use NTP to set the clock during the install +d-i clock-setup/ntp boolean true +# NTP server to use. The default is almost always fine here. +#d-i clock-setup/ntp-server string ntp.example.com + +### i386 specific disk storage +# Activate DASD disks +#d-i s390-dasd/dasd string 0.0.0200,0.0.0300,0.0.0400 + +# DASD configuration; by default dasdfmt (low-level format) if needed +#d-i s390-dasd/auto-format boolean true +#d-i s390-dasd/force-format boolean true + +# zFCP activation and configuration +# d-i s390-zfcp/zfcp string 0.0.1b34:0x400870075678a1b2:0x201480c800000000, \ +# 0.0.1b34:0x400870075679a1b2:0x201480c800000000 + +### Partitioning +## Partitioning example +# If the system has free space you can choose to only partition that space. +# This is only honoured if partman-auto/method (below) is not set. +# Alternatives: custom, some_device, some_device_crypto, some_device_lvm. +#d-i partman-auto/init_automatically_partition select biggest_free + +# Alternatively, you may specify a disk to partition. If the system has only +# one disk the installer will default to using that, but otherwise the device +# name must be given in traditional, non-devfs format (so e.g. /dev/sda +# and not e.g. /dev/discs/disc0/disc). +# For example, to use the first SCSI/SATA hard disk: +#d-i partman-auto/disk string /dev/sda +# In addition, you'll need to specify the method to use. +# The presently available methods are: +# - regular: use the usual partition types for your architecture +# - lvm: use LVM to partition the disk +# - crypto: use LVM within an encrypted partition +d-i partman-auto/method string lvm + +# If one of the disks that are going to be automatically partitioned +# contains an old LVM configuration, the user will normally receive a +# warning. This can be preseeded away... +d-i partman-lvm/device_remove_lvm boolean true +# The same applies to pre-existing software RAID array: +d-i partman-md/device_remove_md boolean true +# And the same goes for the confirmation to write the lvm partitions. +d-i partman-lvm/confirm boolean true +d-i partman-lvm/confirm_nooverwrite boolean true + +# For LVM partitioning, you can select how much of the volume group to use +# for logical volumes. +#d-i partman-auto-lvm/guided_size string max +#d-i partman-auto-lvm/guided_size string 10GB +#d-i partman-auto-lvm/guided_size string 50% + +# You can choose one of the three predefined partitioning recipes: +# - atomic: all files in one partition +# - home: separate /home partition +# - multi: separate /home, /var, and /tmp partitions +d-i partman-auto/choose_recipe select atomic + +# Or provide a recipe of your own... +# If you have a way to get a recipe file into the d-i environment, you can +# just point at it. +#d-i partman-auto/expert_recipe_file string /hd-media/recipe + +# If not, you can put an entire recipe into the preconfiguration file in one +# (logical) line. This example creates a small /boot partition, suitable +# swap, and uses the rest of the space for the root partition: +#d-i partman-auto/expert_recipe string \ +# boot-root :: \ +# 40 50 100 ext3 \ +# $primary{ } $bootable{ } \ +# method{ format } format{ } \ +# use_filesystem{ } filesystem{ ext3 } \ +# mountpoint{ /boot } \ +# . \ +# 500 10000 1000000000 ext3 \ +# method{ format } format{ } \ +# use_filesystem{ } filesystem{ ext3 } \ +# mountpoint{ / } \ +# . \ +# 64 512 300% linux-swap \ +# method{ swap } format{ } \ +# . + +# If you just want to change the default filesystem from ext3 to something +# else, you can do that without providing a full recipe. +#d-i partman/default_filesystem string ext4 + +# The full recipe format is documented in the file partman-auto-recipe.txt +# included in the 'debian-installer' package or available from D-I source +# repository. This also documents how to specify settings such as file +# system labels, volume group names and which physical devices to include +# in a volume group. + +# This makes partman automatically partition without confirmation, provided +# that you told it what to do using one of the methods above. +d-i partman-partitioning/confirm_write_new_label boolean true +d-i partman/choose_partition select finish +d-i partman/confirm boolean true +d-i partman/confirm_nooverwrite boolean true + +## Partitioning using RAID +# The method should be set to "raid". +#d-i partman-auto/method string raid +# Specify the disks to be partitioned. They will all get the same layout, +# so this will only work if the disks are the same size. +#d-i partman-auto/disk string /dev/sda /dev/sdb + +# Next you need to specify the physical partitions that will be used. +#d-i partman-auto/expert_recipe string \ +# multiraid :: \ +# 1000 5000 4000 raid \ +# $primary{ } method{ raid } \ +# . \ +# 64 512 300% raid \ +# method{ raid } \ +# . \ +# 500 10000 1000000000 raid \ +# method{ raid } \ +# . + +# Last you need to specify how the previously defined partitions will be +# used in the RAID setup. Remember to use the correct partition numbers +# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported; +# devices are separated using "#". +# Parameters are: +# \ +# + +#d-i partman-auto-raid/recipe string \ +# 1 2 0 ext3 / \ +# /dev/sda1#/dev/sdb1 \ +# . \ +# 1 2 0 swap - \ +# /dev/sda5#/dev/sdb5 \ +# . \ +# 0 2 0 ext3 /home \ +# /dev/sda6#/dev/sdb6 \ +# . + +# For additional information see the file partman-auto-raid-recipe.txt +# included in the 'debian-installer' package or available from D-I source +# repository. + +# This makes partman automatically partition without confirmation. +d-i partman-md/confirm boolean true +d-i partman-partitioning/confirm_write_new_label boolean true +d-i partman/choose_partition select finish +d-i partman/confirm boolean true +d-i partman/confirm_nooverwrite boolean true + +## Controlling how partitions are mounted +# The default is to mount by UUID, but you can also choose "traditional" to +# use traditional device names, or "label" to try filesystem labels before +# falling back to UUIDs. +#d-i partman/mount_style select uuid + +### Base system installation +# Configure a path to the preconfigured base filesystem. This can be used to +# specify a path for the installer to retrieve the filesystem image that will +# be deployed to disk and used as a base system for the installation. +#d-i live-installer/net-image string /install/filesystem.squashfs + +# Configure APT to not install recommended packages by default. Use of this +# option can result in an incomplete system and should only be used by very +# experienced users. +#d-i base-installer/install-recommends boolean false + +# The kernel image (meta) package to be installed; "none" can be used if no +# kernel is to be installed. +#d-i base-installer/kernel/image string linux-generic + +### Apt setup +# You can choose to install restricted and universe software, or to install +# software from the backports repository. +#d-i apt-setup/restricted boolean true +#d-i apt-setup/universe boolean true +#d-i apt-setup/backports boolean true +# Uncomment this if you don't want to use a network mirror. +#d-i apt-setup/use_mirror boolean false +# Select which update services to use; define the mirrors to be used. +# Values shown below are the normal defaults. +#d-i apt-setup/services-select multiselect security +#d-i apt-setup/security_host string security.ubuntu.com +#d-i apt-setup/security_path string /ubuntu + +# Additional repositories, local[0-9] available +#d-i apt-setup/local0/repository string \ +# http://local.server/ubuntu stretch main +#d-i apt-setup/local0/comment string local server +# Enable deb-src lines +#d-i apt-setup/local0/source boolean true +# URL to the public key of the local repository; you must provide a key or +# apt will complain about the unauthenticated repository and so the +# sources.list line will be left commented out +#d-i apt-setup/local0/key string http://local.server/key + +# By default the installer requires that repositories be authenticated +# using a known gpg key. This setting can be used to disable that +# authentication. Warning: Insecure, not recommended. +#d-i debian-installer/allow_unauthenticated boolean true + +# Uncomment this to add multiarch configuration for i386 +#d-i apt-setup/multiarch string i386 + + +### Package selection +tasksel tasksel/first multiselect ubuntu-desktop +#tasksel tasksel/first multiselect lamp-server, print-server +#tasksel tasksel/first multiselect kubuntu-desktop + +# Individual additional packages to install +#d-i pkgsel/include string openssh-server build-essential +# Whether to upgrade packages after debootstrap. +# Allowed values: none, safe-upgrade, full-upgrade +#d-i pkgsel/upgrade select none + +# Language pack selection +#d-i pkgsel/language-packs multiselect de, en, zh + +# Policy for applying updates. May be "none" (no automatic updates), +# "unattended-upgrades" (install security updates automatically), or +# "landscape" (manage system with Landscape). +#d-i pkgsel/update-policy select none + +# Some versions of the installer can report back on what software you have +# installed, and what software you use. The default is not to report back, +# but sending reports helps the project determine what software is most +# popular and include it on CDs. +#popularity-contest popularity-contest/participate boolean false + +# By default, the system's locate database will be updated after the +# installer has finished installing most packages. This may take a while, so +# if you don't want it, you can set this to "false" to turn it off. +#d-i pkgsel/updatedb boolean true + +### Boot loader installation +# Grub is the default boot loader (for x86). If you want lilo installed +# instead, uncomment this: +#d-i grub-installer/skip boolean true +# To also skip installing lilo, and install no bootloader, uncomment this +# too: +#d-i lilo-installer/skip boolean true + + +# This is fairly safe to set, it makes grub install automatically to the MBR +# if no other operating system is detected on the machine. +d-i grub-installer/only_debian boolean true + +# This one makes grub-installer install to the MBR if it also finds some other +# OS, which is less safe as it might not be able to boot that other OS. +d-i grub-installer/with_other_os boolean true + +# Due notably to potential USB sticks, the location of the MBR can not be +# determined safely in general, so this needs to be specified: +#d-i grub-installer/bootdev string /dev/sda +# To install to the first device (assuming it is not a USB stick): +#d-i grub-installer/bootdev string default + +# Alternatively, if you want to install to a location other than the mbr, +# uncomment and edit these lines: +#d-i grub-installer/only_debian boolean false +#d-i grub-installer/with_other_os boolean false +#d-i grub-installer/bootdev string (hd0,1) +# To install grub to multiple disks: +#d-i grub-installer/bootdev string (hd0,1) (hd1,1) (hd2,1) + +# Optional password for grub, either in clear text +#d-i grub-installer/password password r00tme +#d-i grub-installer/password-again password r00tme +# or encrypted using an MD5 hash, see grub-md5-crypt(8). +#d-i grub-installer/password-crypted password [MD5 hash] + +# Use the following option to add additional boot parameters for the +# installed system (if supported by the bootloader installer). +# Note: options passed to the installer will be added automatically. +#d-i debian-installer/add-kernel-opts string nousb + +### Finishing up the installation +# During installations from serial console, the regular virtual consoles +# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next +# line to prevent this. +#d-i finish-install/keep-consoles boolean true + +# Avoid that last message about the install being complete. +d-i finish-install/reboot_in_progress note + +# This will prevent the installer from ejecting the CD during the reboot, +# which is useful in some situations. +#d-i cdrom-detect/eject boolean false + +# This is how to make the installer shutdown when finished, but not +# reboot into the installed system. +#d-i debian-installer/exit/halt boolean true +# This will power off the machine instead of just halting it. +#d-i debian-installer/exit/poweroff boolean true + +### Preseeding other packages +# Depending on what software you choose to install, or if things go wrong +# during the installation process, it's possible that other questions may +# be asked. You can preseed those too, of course. To get a list of every +# possible question that could be asked during an install, do an +# installation, and then run these commands: +# debconf-get-selections --installer > file +# debconf-get-selections >> file + + +#### Advanced options +### Running custom commands during the installation +## i386 Preseed Example +# d-i preseeding is inherently not secure. Nothing in the installer checks +# for attempts at buffer overflows or other exploits of the values of a +# preconfiguration file like this one. Only use preconfiguration files from +# trusted locations! To drive that home, and because it's generally useful, +# here's a way to run any shell command you'd like inside the installer, +# automatically. + +# This first command is run as early as possible, just after +# preseeding is read. +#d-i preseed/early_command string anna-install some-udeb +# This command is run immediately before the partitioner starts. It may be +# useful to apply dynamic partitioner preseeding that depends on the state +# of the disks (which may not be visible when preseed/early_command runs). +#d-i partman/early_command \ +# string debconf-set partman-auto/disk "$(list-devices disk | head -n1)" +# This command is run just before the install finishes, but when there is +# still a usable /target directory. You can chroot to /target and use it +# directly, or use the apt-install and in-target commands to easily install +# packages and run commands in the target system. +#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh + diff --git a/ubuntu-makevm/preseed.cfg b/ubuntu-makevm/preseed.cfg index 18fb44f..37eecad 100644 --- a/ubuntu-makevm/preseed.cfg +++ b/ubuntu-makevm/preseed.cfg @@ -1,185 +1,413 @@ - -### Preseed for Ubuntu 18.04 -# Derived from: https://help.ubuntu.com/lts/installation-guide/example-preseed.txt -# Derived again from https://gist.github.com/CalvinHartwell/f2d7f5dedbfee2d7d47c583539a10859 - -d-i auto-install/enable boolean true - -d-i debian-installer/language string en -d-i debian-installer/locale string en_US.UTF-8 -d-i debian-installer/country string US -d-i keyboard-configuration/xkb-keymap select US - -d-i /choose_interface select auto -# d-i netcfg/hostname string device +d-i debian-installer/locale string en_US +d-i console-setup/ask_detect boolean false +d-i keyboard-configuration/xkb-keymap select us +d-i netcfg/choose_interface select auto +# Any hostname and domain names assigned from dhcp take precedence over +# values set here. However, setting the values still prevents the questions +# from being shown, even if values come from dhcp. d-i netcfg/get_hostname string unassigned-hostname d-i netcfg/get_domain string unassigned-domain + +# If you want to force a hostname, regardless of what either the DHCP +# server returns or what the reverse DNS entry for the IP is, uncomment +# and adjust the following line. +d-i netcfg/hostname string testvm + +# Disable that annoying WEP key dialog. +d-i netcfg/wireless_wep string d-i hw-detect/load_firmware boolean true +### Mirror settings +# If you select ftp, the mirror/country string does not need to be set. +d-i mirror/protocol string http +d-i mirror/country string manual +d-i mirror/http/hostname string ubuntumirror.app.las1.eeqj.de +d-i mirror/http/directory string /ubuntu +d-i mirror/http/proxy string +d-i apt-setup/security_host string ubuntumirror.app.las1.eeqj.de + +# Alternatively: by default, the installer uses CC.archive.ubuntu.com where +# CC is the ISO-3166-2 code for the selected country. You can preseed this +# so that it does so without asking. +# +# dist: +#d-i mirror/http/mirror select us.archive.ubuntu.com +#d-i mirror/http/mirror select ubuntumirror.app.las1.eeqj.de + +# Suite to install. +d-i mirror/suite string bionic +# Suite to use for loading installer components (optional). +#d-i mirror/udeb/suite string stretch +# Components to use for loading installer components (optional). +#d-i mirror/udeb/components multiselect main, restricted + ### Account setup +# Skip creation of a root account (normal user account will be able to +# use sudo). The default is false; preseed this to true if you want to set +# a root password. d-i passwd/root-login boolean true -d-i passwd/root-password-crypted password !! +# Alternatively, to skip creation of a normal user account. d-i passwd/make-user boolean false -d-i clock-setup/utc boolean true -d-i time/zone string UTC -d-i clock-setup/ntp boolean true +# Root password, either in clear text +d-i passwd/root-password password changeme +d-i passwd/root-password-again password changeme +# or encrypted using a crypt(3) hash. +#d-i passwd/root-password-crypted password [crypt(3) hash] + +# To create a normal user account. +#d-i passwd/user-fullname string Ubuntu User +#d-i passwd/username string ubuntu +# Normal user's password, either in clear text +#d-i passwd/user-password password insecure +#d-i passwd/user-password-again password insecure +# or encrypted using a crypt(3) hash. +#d-i passwd/user-password-crypted password [crypt(3) hash] +# Create the first user with the specified UID instead of the default. +#d-i passwd/user-uid string 1010 +# The installer will warn about weak passwords. If you are sure you know +# what you're doing and want to override it, uncomment this. +#d-i user-setup/allow-password-weak boolean true + +# The user account will be added to some standard initial groups. To +# override that, use this. +#d-i passwd/user-default-groups string audio cdrom video + +# Set to true if you want to encrypt the first user's home directory. +d-i user-setup/encrypt-home boolean false + +### Clock and time zone setup +# Controls whether or not the hardware clock is set to UTC. +d-i clock-setup/utc boolean true + +# You may set this to any valid setting for $TZ; see the contents of +# /usr/share/zoneinfo/ for valid values. +d-i time/zone string UTC + +# Controls whether to use NTP to set the clock during the install +d-i clock-setup/ntp boolean true +# NTP server to use. The default is almost always fine here. +#d-i clock-setup/ntp-server string ntp.example.com -# LG provided NTP, should be replaced! -d-i clock-setup/ntp-server string 10.100.202.175 ### Partitioning -#d-i preseed/early_command string umount /media || true +## Partitioning example +# If the system has free space you can choose to only partition that space. +# This is only honoured if partman-auto/method (below) is not set. +# Alternatives: custom, some_device, some_device_crypto, some_device_lvm. +#d-i partman-auto/init_automatically_partition select biggest_free + +# Alternatively, you may specify a disk to partition. If the system has only +# one disk the installer will default to using that, but otherwise the device +# name must be given in traditional, non-devfs format (so e.g. /dev/sda +# and not e.g. /dev/discs/disc0/disc). +# For example, to use the first SCSI/SATA hard disk: +#d-i partman-auto/disk string /dev/sda +# In addition, you'll need to specify the method to use. +# The presently available methods are: +# - regular: use the usual partition types for your architecture +# - lvm: use LVM to partition the disk +# - crypto: use LVM within an encrypted partition d-i partman-auto/method string lvm -d-i partman-auto-lvm/guided_size string max + +# If one of the disks that are going to be automatically partitioned +# contains an old LVM configuration, the user will normally receive a +# warning. This can be preseeded away... d-i partman-lvm/device_remove_lvm boolean true +# The same applies to pre-existing software RAID array: +d-i partman-md/device_remove_md boolean true +# And the same goes for the confirmation to write the lvm partitions. d-i partman-lvm/confirm boolean true d-i partman-lvm/confirm_nooverwrite boolean true -d-i partman-auto-lvm/new_vg_name string vg0 -d-i partman-md/device_remove_md boolean true + +# For LVM partitioning, you can select how much of the volume group to use +# for logical volumes. +#d-i partman-auto-lvm/guided_size string max +#d-i partman-auto-lvm/guided_size string 10GB +#d-i partman-auto-lvm/guided_size string 50% + +# You can choose one of the three predefined partitioning recipes: +# - atomic: all files in one partition +# - home: separate /home partition +# - multi: separate /home, /var, and /tmp partitions +d-i partman-auto/choose_recipe select atomic + +# Or provide a recipe of your own... +# If you have a way to get a recipe file into the d-i environment, you can +# just point at it. +#d-i partman-auto/expert_recipe_file string /hd-media/recipe + +# If not, you can put an entire recipe into the preconfiguration file in one +# (logical) line. This example creates a small /boot partition, suitable +# swap, and uses the rest of the space for the root partition: +#d-i partman-auto/expert_recipe string \ +# boot-root :: \ +# 40 50 100 ext3 \ +# $primary{ } $bootable{ } \ +# method{ format } format{ } \ +# use_filesystem{ } filesystem{ ext3 } \ +# mountpoint{ /boot } \ +# . \ +# 500 10000 1000000000 ext3 \ +# method{ format } format{ } \ +# use_filesystem{ } filesystem{ ext3 } \ +# mountpoint{ / } \ +# . \ +# 64 512 300% linux-swap \ +# method{ swap } format{ } \ +# . + +# If you just want to change the default filesystem from ext3 to something +# else, you can do that without providing a full recipe. +#d-i partman/default_filesystem string ext4 + +# The full recipe format is documented in the file partman-auto-recipe.txt +# included in the 'debian-installer' package or available from D-I source +# repository. This also documents how to specify settings such as file +# system labels, volume group names and which physical devices to include +# in a volume group. + +# This makes partman automatically partition without confirmation, provided +# that you told it what to do using one of the methods above. +d-i partman-partitioning/confirm_write_new_label boolean true +d-i partman/choose_partition select finish +d-i partman/confirm boolean true +d-i partman/confirm_nooverwrite boolean true + +## Partitioning using RAID +# The method should be set to "raid". +#d-i partman-auto/method string raid +# Specify the disks to be partitioned. They will all get the same layout, +# so this will only work if the disks are the same size. +#d-i partman-auto/disk string /dev/sda /dev/sdb + +# Next you need to specify the physical partitions that will be used. +#d-i partman-auto/expert_recipe string \ +# multiraid :: \ +# 1000 5000 4000 raid \ +# $primary{ } method{ raid } \ +# . \ +# 64 512 300% raid \ +# method{ raid } \ +# . \ +# 500 10000 1000000000 raid \ +# method{ raid } \ +# . + +# Last you need to specify how the previously defined partitions will be +# used in the RAID setup. Remember to use the correct partition numbers +# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported; +# devices are separated using "#". +# Parameters are: +# \ +# + +#d-i partman-auto-raid/recipe string \ +# 1 2 0 ext3 / \ +# /dev/sda1#/dev/sdb1 \ +# . \ +# 1 2 0 swap - \ +# /dev/sda5#/dev/sdb5 \ +# . \ +# 0 2 0 ext3 /home \ +# /dev/sda6#/dev/sdb6 \ +# . + +# For additional information see the file partman-auto-raid-recipe.txt +# included in the 'debian-installer' package or available from D-I source +# repository. + +# This makes partman automatically partition without confirmation. d-i partman-md/confirm boolean true d-i partman-partitioning/confirm_write_new_label boolean true d-i partman/choose_partition select finish d-i partman/confirm boolean true d-i partman/confirm_nooverwrite boolean true -d-i partman-basicmethods/method_only boolean false -### Partitioning -d-i partman-auto/method string lvm -d-i partman-lvm/device_remove_lvm boolean true -d-i partman-lvm/confirm boolean true -d-i partman-lvm/confirm_nooverwrite boolean true - -### Grub -d-i grub-installer/only_debian boolean true -d-i grub-installer/with_other_os boolean true - -d-i partman-auto-lvm/new_vg_name string vg-root - - -d-i partman-auto/expert_recipe string \ - custom-lvm :: \ - 269 269 269 ext4 $primary{ } $bootable{ } \ - mountpoint{ /boot } \ - method{ format } \ - format{ } \ - use_filesystem{ } \ - filesystem{ ext4 } \ - . \ - 2152 2152 100% linux-swap $lvmok{ } \ - lv_name{ lv_swap } \ - in_vg { vg-root } \ - method{ swap } \ - format{ } \ - . \ - 8608 1 8608 ext4 $lvmok{ } \ - mountpoint{ / } \ - lv_name{ lv_root } \ - in_vg { vg-root } \ - method{ format } \ - format{ } \ - use_filesystem{ } \ - filesystem{ ext4 } \ - . \ - 1076 1 1076 ext4 $lvmok{ } \ - mountpoint{ /export/home } \ - lv_name{ lv_home } \ - in_vg { vg-root } \ - method{ format } \ - format{ } \ - options/nodev{ nodev } \ - use_filesystem{ } \ - filesystem{ ext4 } \ - . \ - 1076 1 1076 ext4 $lvmok{ } \ - mountpoint{ /tmp } \ - lv_name{ lv_tmp } \ - in_vg { vg-root } \ - method{ format } \ - format{ } \ - options/nodev{ nodev } \ - options/nosuid{ nosuid } \ - options/noexec{ noexec } \ - use_filesystem{ } \ - filesystem{ ext4 } \ - . \ - 2152 1 2152 ext4 $lvmok{ } \ - mountpoint{ /var } \ - lv_name{ lv_var } \ - in_vg { vg-root } \ - method{ format } \ - format{ } \ - use_filesystem{ } \ - filesystem{ ext4 } \ - . \ - 2152 1 2152 ext4 $lvmok{ } \ - mountpoint{ /var/log } \ - lv_name{ lv_log } \ - in_vg { vg-root } \ - method{ format } \ - format{ } \ - use_filesystem{ } \ - filesystem{ ext4 } \ - . \ - 538 1 538 ext4 $lvmok{ } \ - mountpoint{ /var/log/audit } \ - lv_name{ lv_audit } \ - in_vg { vg-root } \ - method{ format } \ - format{ } \ - use_filesystem{ } \ - filesystem{ ext4 } \ - . \ - 128 1 -1 ext4 $lvmok{ } \ - mountpoint{ /tmp/delete } \ - lv_name{ lv_delete } \ - in_vg { vg-root } \ - method{ format } \ - format{ } \ - use_filesystem{ } \ - filesystem{ ext4 } \ - . - -d-i partman-lvm/confirm boolean true -d-i partman-lvm/confirm_nooverwrite boolean true -d-i partman/choose_partition select finish -d-i partman/confirm_write_new_label boolean true -d-i partman-auto-lvm/guided_size string max +## Controlling how partitions are mounted +# The default is to mount by UUID, but you can also choose "traditional" to +# use traditional device names, or "label" to try filesystem labels before +# falling back to UUIDs. +#d-i partman/mount_style select uuid ### Base system installation -d-i base-installer/install-recommends boolean true -d-i base-installer/kernel/image string linux-generic -d-i debconf debconf/frontend select Noninteractive +# Configure a path to the preconfigured base filesystem. This can be used to +# specify a path for the installer to retrieve the filesystem image that will +# be deployed to disk and used as a base system for the installation. +#d-i live-installer/net-image string /install/filesystem.squashfs + +# Configure APT to not install recommended packages by default. Use of this +# option can result in an incomplete system and should only be used by very +# experienced users. +# FIXME i think i want this disabled, but make sure this file works first +#d-i base-installer/install-recommends boolean false + +# The kernel image (meta) package to be installed; "none" can be used if no +# kernel is to be installed. +#d-i base-installer/kernel/image string linux-generic + +### Apt setup +# You can choose to install restricted and universe software, or to install +# software from the backports repository. +#d-i apt-setup/restricted boolean true +#d-i apt-setup/universe boolean true +#d-i apt-setup/backports boolean true +# Uncomment this if you don't want to use a network mirror. +#d-i apt-setup/use_mirror boolean false +# Select which update services to use; define the mirrors to be used. +# Values shown below are the normal defaults. +#d-i apt-setup/services-select multiselect security +#d-i apt-setup/security_host string security.ubuntu.com +#d-i apt-setup/security_path string /ubuntu + +# Additional repositories, local[0-9] available +#d-i apt-setup/local0/repository string \ +# http://local.server/ubuntu stretch main +#d-i apt-setup/local0/comment string local server +# Enable deb-src lines +#d-i apt-setup/local0/source boolean true +# URL to the public key of the local repository; you must provide a key or +# apt will complain about the unauthenticated repository and so the +# sources.list line will be left commented out +#d-i apt-setup/local0/key string http://local.server/key + +# By default the installer requires that repositories be authenticated +# using a known gpg key. This setting can be used to disable that +# authentication. Warning: Insecure, not recommended. +#d-i debian-installer/allow_unauthenticated boolean true + +# Uncomment this to add multiarch configuration for i386 +#d-i apt-setup/multiarch string i386 -d-i mirror/http/hostname string 10.100.202.204 -d-i mirror/http/directory string /ubuntu -d-i mirror/http/mirror select 10.100.202.204 ### Package selection -d-i tasksel/first multiselect none -d-i pkgsel/include string openssh-server -d-i pkgsel/upgrade select full-upgrade -#d-i pkgsel/update-policy select unattended-upgrades -d-i pkgsel/include string openssh-server \ - vim \ - byobu \ - git \ - tmux \ - build-essential \ - open-vm-tools \ - telnet \ - wget \ - curl \ - python +#tasksel tasksel/first multiselect ubuntu-server +tasksel tasksel/first multiselect ubuntu-minimal +#tasksel tasksel/first multiselect lamp-server, print-server +#tasksel tasksel/first multiselect kubuntu-desktop -d-i preseed/late_command string \ - in-target sh -c 'mkdir -p --mode=0700 /root/.ssh'; \ - in-target sh -c 'curl https://sneak.cloud/authorized_keys > /root/.ssh/authorized_keys'; \ - in-target sh -c 'chmod 0600 /root/.ssh/authorized_keys'; \ - in-target sh -c 'echo "IPv4: \\\4" >> /etc/issue && echo "IPv6: \\\6" >> /etc/issue && echo "" >> /etc/issue'; +# Individual additional packages to install +d-i pkgsel/include string openssh-server ca-certificates curl +# Whether to upgrade packages after debootstrap. +# Allowed values: none, safe-upgrade, full-upgrade +#d-i pkgsel/upgrade select none -d-i debian-installer/splash boolean false +# Language pack selection +#d-i pkgsel/language-packs multiselect de, en, zh -### Shutdown machine -#d-i finish-install/reboot_in_progress note +# Policy for applying updates. May be "none" (no automatic updates), +# "unattended-upgrades" (install security updates automatically), or +# "landscape" (manage system with Landscape). +#d-i pkgsel/update-policy select none + +# Some versions of the installer can report back on what software you have +# installed, and what software you use. The default is not to report back, +# but sending reports helps the project determine what software is most +# popular and include it on CDs. +#popularity-contest popularity-contest/participate boolean false + +# By default, the system's locate database will be updated after the +# installer has finished installing most packages. This may take a while, so +# if you don't want it, you can set this to "false" to turn it off. +#d-i pkgsel/updatedb boolean true + +### Boot loader installation +# Grub is the default boot loader (for x86). If you want lilo installed +# instead, uncomment this: +#d-i grub-installer/skip boolean true +# To also skip installing lilo, and install no bootloader, uncomment this +# too: +#d-i lilo-installer/skip boolean true + + +# This is fairly safe to set, it makes grub install automatically to the MBR +# if no other operating system is detected on the machine. +d-i grub-installer/only_debian boolean true + +# This one makes grub-installer install to the MBR if it also finds some other +# OS, which is less safe as it might not be able to boot that other OS. +d-i grub-installer/with_other_os boolean true + +# Due notably to potential USB sticks, the location of the MBR can not be +# determined safely in general, so this needs to be specified: +#d-i grub-installer/bootdev string /dev/sda +# To install to the first device (assuming it is not a USB stick): +#d-i grub-installer/bootdev string default + +# Alternatively, if you want to install to a location other than the mbr, +# uncomment and edit these lines: +#d-i grub-installer/only_debian boolean false +#d-i grub-installer/with_other_os boolean false +#d-i grub-installer/bootdev string (hd0,1) +# To install grub to multiple disks: +#d-i grub-installer/bootdev string (hd0,1) (hd1,1) (hd2,1) + +# Optional password for grub, either in clear text +#d-i grub-installer/password password r00tme +#d-i grub-installer/password-again password r00tme +# or encrypted using an MD5 hash, see grub-md5-crypt(8). +#d-i grub-installer/password-crypted password [MD5 hash] + +# Use the following option to add additional boot parameters for the +# installed system (if supported by the bootloader installer). +# Note: options passed to the installer will be added automatically. +#d-i debian-installer/add-kernel-opts string nousb + +### Finishing up the installation +# During installations from serial console, the regular virtual consoles +# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next +# line to prevent this. +#d-i finish-install/keep-consoles boolean true + +# Avoid that last message about the install being complete. +d-i finish-install/reboot_in_progress note + +# This will prevent the installer from ejecting the CD during the reboot, +# which is useful in some situations. +#d-i cdrom-detect/eject boolean false + +# This is how to make the installer shutdown when finished, but not +# reboot into the installed system. +#d-i debian-installer/exit/halt boolean true +# This will power off the machine instead of just halting it. #d-i debian-installer/exit/poweroff boolean true + +### Preseeding other packages +# Depending on what software you choose to install, or if things go wrong +# during the installation process, it's possible that other questions may +# be asked. You can preseed those too, of course. To get a list of every +# possible question that could be asked during an install, do an +# installation, and then run these commands: +# debconf-get-selections --installer > file +# debconf-get-selections >> file + + +#### Advanced options +### Running custom commands during the installation +## i386 Preseed Example +# d-i preseeding is inherently not secure. Nothing in the installer checks +# for attempts at buffer overflows or other exploits of the values of a +# preconfiguration file like this one. Only use preconfiguration files from +# trusted locations! To drive that home, and because it's generally useful, +# here's a way to run any shell command you'd like inside the installer, +# automatically. + +# This first command is run as early as possible, just after +# preseeding is read. +#d-i preseed/early_command string anna-install some-udeb +# This command is run immediately before the partitioner starts. It may be +# useful to apply dynamic partitioner preseeding that depends on the state +# of the disks (which may not be visible when preseed/early_command runs). +#d-i partman/early_command \ +# string debconf-set partman-auto/disk "$(list-devices disk | head -n1)" +# This command is run just before the install finishes, but when there is +# still a usable /target directory. You can chroot to /target and use it +# directly, or use the apt-install and in-target commands to easily install +# packages and run commands in the target system. +#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh + + +# some extra commands to set up SSH key access +d-i preseed/late_command string in-target mkdir /root/.ssh ; \ + in-target sh -c 'curl -sf https://sneak.cloud/authorized_keys >> /root/.ssh/authorized_keys' ; \ + in-target systemctl enable serial-getty@ttyS0.service ;