server: set ReadTimeout, WriteTimeout, and IdleTimeout (closes #99)

The http.Server literal only set ReadHeaderTimeout. The other three
timeouts defaulted to zero, which in net/http means no limit: past the
header phase a peer could hold a connection open forever, responses had
no write deadline, and keep-alive connections were never reaped.
REPO_POLICIES.md requires all four before 1.0.

All four are now named constants in internal/server/server.go:

  ReadHeaderTimeout  10s  (unchanged)
  ReadTimeout        15s  whole request; every route is a bodyless GET
  WriteTimeout       75s  handler execution plus response flush
  IdleTimeout       120s  keep-alive reaping

WriteTimeout must exceed the 60s chimw.Timeout handler budget in
routes.go. net/http arms the write deadline once the request headers
have been read, so it covers handler execution as well as the response
write; a smaller value would sever the connection before a handler that
legitimately used its full budget could respond, making that budget
unreachable. The 15s difference is the response-flush allowance. The
comment on the const block states this relationship.

IdleTimeout sits above the common Prometheus scrape intervals so the
scraper reuses its connection instead of reconnecting each cycle, while
an abandoned connection is still reaped within two minutes.

The http.Server literal moved into newHTTPServer so the configuration
is testable without binding a socket. Tests assert all four fields are
non-zero, that WriteTimeout exceeds the handler budget, and that
ReadTimeout covers ReadHeaderTimeout; they compare configured values
only and measure no elapsed time, so they cannot flake.

README.md

@@ -182,6 +182,27 @@ dnswatcher exposes a lightweight HTTP API for operational visibility:
 | `GET /api/v1/status`                  | Current monitoring state       |
 | `GET /metrics`                        | Prometheus metrics (optional)  |
 
+#### Server timeouts
+
+The HTTP server sets all four socket-level timeouts. These are compile-time
+constants in `internal/server/server.go`, not configurable via environment
+variables.
+
+| Timeout             | Value | Purpose                                       |
+|---------------------|-------|-----------------------------------------------|
+| `ReadHeaderTimeout` | 10s   | Bounds the request header read (slowloris)    |
+| `ReadTimeout`       | 15s   | Bounds the whole request read, headers + body |
+| `WriteTimeout`      | 75s   | Bounds handler execution plus response flush  |
+| `IdleTimeout`       | 120s  | Reaps idle keep-alive connections             |
+
+These are distinct from the 60s per-request handler budget applied by
+`chimw.Timeout` in `internal/server/routes.go`, which cancels the request
+context but does not touch the socket. `WriteTimeout` is deliberately
+larger than that budget: the write deadline is armed once request headers
+are read, so a smaller value would sever the connection before a handler
+using its full budget could respond. `IdleTimeout` exceeds common
+Prometheus scrape intervals so the scraper reuses its connection.
+
 ---
 
 ## Architecture

TODO.md

@@ -25,6 +25,14 @@ confirm make check still passes.
 
 # Completed Steps
 
+- 2026-08-09: `http.Server` now sets all four socket-level timeouts
+  (`ReadTimeout` 15s, `ReadHeaderTimeout` 10s, `WriteTimeout` 75s,
+  `IdleTimeout` 120s) as named constants in `internal/server/server.go`,
+  closing the slowloris / unreaped-keep-alive exposure required by
+  `REPO_POLICIES.md` before 1.0; `WriteTimeout` is deliberately greater
+  than the 60s `chimw.Timeout` handler budget so that budget stays
+  reachable, and tests in `internal/server` pin both the non-zero
+  values and that relationship (#99)
 - 2026-08-07: golangci-lint bumped to v2.12.2 (commit-pinned installs
   in `Dockerfile` and `script/bootstrap`); `.golangci.yml` set to the
   org-standard v2-schema config used across the org's repos

internal/server/export_test.go

@@ -0,0 +1,19 @@
+package server
+
+import (
+	"net/http"
+	"time"
+)
+
+// NewHTTPServer exports newHTTPServer for testing.
+func NewHTTPServer(
+	listenAddr string,
+	handler http.Handler,
+) *http.Server {
+	return newHTTPServer(listenAddr, handler)
+}
+
+// RequestTimeout exports the handler execution budget applied by
+// chimw.Timeout in SetupRoutes, so tests can assert the relationship
+// between it and the server's WriteTimeout.
+const RequestTimeout time.Duration = requestTimeout

internal/server/server.go

@@ -33,8 +33,52 @@ type Params struct {
 // shutdownTimeout is how long to wait for graceful shutdown.
 const shutdownTimeout = 30 * time.Second
 
-// readHeaderTimeout is the max duration for reading request headers.
+// Socket-level timeouts for the HTTP server.
-const readHeaderTimeout = 10 * time.Second
+//
+// These bound time spent on the connection itself and are a distinct
+// control from the per-request handler budget enforced by
+// chimw.Timeout(requestTimeout) in routes.go: that one cancels the
+// request context after requestTimeout but never touches the socket,
+// so without the values below a peer can hold a connection open
+// forever (slowloris, unreaped keep-alives).
+//
+// The one hard constraint between the two controls is
+// writeTimeout > requestTimeout. net/http arms the write deadline
+// once the request headers have been read, so on a plaintext
+// connection it covers handler execution AND the response flush. If
+// writeTimeout were <= requestTimeout the server would sever the
+// connection before a handler that legitimately consumed its full
+// budget could emit anything, making the 60s budget unreachable in
+// practice. The margin between them is the response-flush allowance.
+//
+// The only clients of this service are browsers loading the dashboard
+// and a Prometheus scraper; the values are sized for those.
+const (
+	// readHeaderTimeout is the max duration for reading request
+	// headers.
+	readHeaderTimeout = 10 * time.Second
+
+	// readTimeout bounds reading the entire request, headers plus
+	// body. Every route here is a GET with no body, so this only
+	// ever needs to cover headers; the extra 5s over
+	// readHeaderTimeout is slack, not a real allowance, and keeps a
+	// body dribbled one byte at a time from holding the read side
+	// open indefinitely.
+	readTimeout = 15 * time.Second
+
+	// writeTimeout must exceed the requestTimeout handler budget
+	// (60s) per the note above. The 15s difference is the allowance
+	// for flushing a completed response to a slow client.
+	writeTimeout = 75 * time.Second
+
+	// idleTimeout reaps keep-alive connections between requests. It
+	// is deliberately longer than the common Prometheus scrape
+	// intervals (15s/30s/60s) so the scraper reuses its connection
+	// rather than reconnecting every cycle, while a browser tab
+	// left open on the dashboard stops occupying a connection
+	// within two minutes of going quiet.
+	idleTimeout = 120 * time.Second
+)
 
 // Server is the HTTP server.
 type Server struct {
@@ -76,16 +120,29 @@ func New(
 	return srv, nil
 }
 
+// newHTTPServer builds the listening http.Server with every
+// socket-level timeout set. All four are set deliberately: a zero
+// value in net/http means "no limit", not "some default".
+func newHTTPServer(
+	listenAddr string,
+	handler http.Handler,
+) *http.Server {
+	return &http.Server{
+		Addr:              listenAddr,
+		Handler:           handler,
+		ReadTimeout:       readTimeout,
+		ReadHeaderTimeout: readHeaderTimeout,
+		WriteTimeout:      writeTimeout,
+		IdleTimeout:       idleTimeout,
+	}
+}
+
 // Run starts the HTTP server.
 func (s *Server) Run() {
 	s.SetupRoutes()
 
 	listenAddr := fmt.Sprintf(":%d", s.port)
-	s.httpServer = &http.Server{
+	s.httpServer = newHTTPServer(listenAddr, s)
-		Addr:              listenAddr,
-		Handler:           s,
-		ReadHeaderTimeout: readHeaderTimeout,
-	}
 
 	s.log.Info("http server starting", "addr", listenAddr)
 

internal/server/server_test.go

@@ -0,0 +1,112 @@
+package server_test
+
+import (
+	"net/http"
+	"testing"
+
+	"sneak.berlin/go/dnswatcher/internal/server"
+)
+
+// noopHandler stands in for the router; newHTTPServer only stores it.
+func noopHandler() http.Handler {
+	return http.HandlerFunc(
+		func(w http.ResponseWriter, _ *http.Request) {
+			w.WriteHeader(http.StatusOK)
+		},
+	)
+}
+
+// TestHTTPServerTimeoutsAreSet asserts that every socket-level
+// timeout is configured. A zero value in net/http means "no limit",
+// so a refactor that silently drops one of these reintroduces the
+// slowloris / unreaped-keep-alive exposure this guards against.
+//
+// The assertions are on the configured field values only; nothing
+// here measures elapsed time, so the test cannot flake on timing.
+func TestHTTPServerTimeoutsAreSet(t *testing.T) {
+	t.Parallel()
+
+	srv := server.NewHTTPServer(":8080", noopHandler())
+
+	if srv.ReadTimeout <= 0 {
+		t.Errorf(
+			"ReadTimeout must be non-zero, got %v",
+			srv.ReadTimeout,
+		)
+	}
+
+	if srv.ReadHeaderTimeout <= 0 {
+		t.Errorf(
+			"ReadHeaderTimeout must be non-zero, got %v",
+			srv.ReadHeaderTimeout,
+		)
+	}
+
+	if srv.WriteTimeout <= 0 {
+		t.Errorf(
+			"WriteTimeout must be non-zero, got %v",
+			srv.WriteTimeout,
+		)
+	}
+
+	if srv.IdleTimeout <= 0 {
+		t.Errorf(
+			"IdleTimeout must be non-zero, got %v",
+			srv.IdleTimeout,
+		)
+	}
+}
+
+// TestWriteTimeoutExceedsHandlerBudget pins the one relationship the
+// values must satisfy. net/http arms the write deadline once request
+// headers are read, so it covers handler execution plus the response
+// flush. If WriteTimeout were not greater than the chimw.Timeout
+// handler budget, the connection would be severed before a handler
+// that used its full budget could respond, making that budget
+// unreachable.
+func TestWriteTimeoutExceedsHandlerBudget(t *testing.T) {
+	t.Parallel()
+
+	srv := server.NewHTTPServer(":8080", noopHandler())
+
+	if srv.WriteTimeout <= server.RequestTimeout {
+		t.Errorf(
+			"WriteTimeout (%v) must exceed handler budget (%v)",
+			srv.WriteTimeout,
+			server.RequestTimeout,
+		)
+	}
+}
+
+// TestReadTimeoutCoversHeaderTimeout asserts the read deadline for
+// the whole request is at least as long as the header-only deadline;
+// a smaller ReadTimeout would make ReadHeaderTimeout unreachable.
+func TestReadTimeoutCoversHeaderTimeout(t *testing.T) {
+	t.Parallel()
+
+	srv := server.NewHTTPServer(":8080", noopHandler())
+
+	if srv.ReadTimeout < srv.ReadHeaderTimeout {
+		t.Errorf(
+			"ReadTimeout (%v) must be >= ReadHeaderTimeout (%v)",
+			srv.ReadTimeout,
+			srv.ReadHeaderTimeout,
+		)
+	}
+}
+
+// TestHTTPServerAddrAndHandler covers the rest of the constructor so
+// a future edit cannot drop the listen address or the handler.
+func TestHTTPServerAddrAndHandler(t *testing.T) {
+	t.Parallel()
+
+	srv := server.NewHTTPServer(":9999", noopHandler())
+
+	if srv.Addr != ":9999" {
+		t.Errorf("Addr = %q, want %q", srv.Addr, ":9999")
+	}
+
+	if srv.Handler == nil {
+		t.Error("Handler must not be nil")
+	}
+}