tests: remove the DNS stand-ins from the watcher and resolver tests (closes #159)

The watcher tests used a stand-in resolver and the resolver timeout test
a stand-in DNS client, against the rule that DNS is never mocked.
Watcher tests that look something up in DNS now run the real resolver
against live servers, each attempt on a new watcher. A DNS change is
tested by saving values live DNS never returns (names under .invalid,
192.0.2.1) in the state a check starts from, or by marking a real
nameserver failed. The timeout test queries 192.0.2.1, where nothing
answers. The live-DNS retry and concurrency limit moved from the
resolver tests to internal/livedns, so both packages share them.
NewFromLoggerWithClient had no other use and is gone. TESTING.md now
states the README's rule.

Model: opus-5-5

.golangci.yml

@@ -10,20 +10,14 @@ run:
 
 linters:
   default: all
-  enable:
-    # Successor to the deprecated gomodguard. Named explicitly, rather than
-    # left to `default: all`, because it carries the module policy below.
-    - gomodguard_v2
   disable:
     # Genuinely incompatible with project patterns
     - exhaustruct      # Requires all struct fields
+    - depguard         # Dependency allow/block lists
     - godot            # Requires comments to end with periods
+    - wsl              # Deprecated, replaced by wsl_v5
     - wrapcheck        # Too verbose for internal packages
     - varnamelen       # Short names like db, id are idiomatic Go
-    # Deprecated: the warning is attached to the old name, so it is
-    # silenced by disabling that name, not by enabling the successor.
-    - wsl              # Deprecated, replaced by wsl_v5
-    - gomodguard       # Deprecated, replaced by gomodguard_v2
   settings:
     lll:
       line-length: 88
@@ -34,68 +28,6 @@ linters:
       max-complexity: 15
     dupl:
       threshold: 100
-    depguard:
-      # Test-support code must not be compiled into the shipped binary. A
-      # test-support package exists to hand a test privileges the program
-      # itself must never have, so a file that is not a test must not import
-      # one. Test files, and the files inside a package whose directory name
-      # ends in `test`, are where that code belongs, and are exempt.
-      #
-      # The deny list below is the one part of this file a repository is
-      # expected to extend, and the only part it may. depguard matches an
-      # import path against a list of prefixes, so it cannot be told "any path
-      # whose last segment ends in test"; a repository's own test-support
-      # packages have to be named here one at a time, by full import path,
-      # under a module path that differs from repository to repository. Add
-      # them; change nothing else.
-      rules:
-        test-support:
-          list-mode: lax
-          files:
-            - "$all"
-            - "!$test"
-            - "!**/*test/**"
-          deny:
-            - pkg: net/http/httptest
-              desc: >-
-                Test-support code belongs in test files and in packages whose
-                directory name ends in test, not in the shipped binary.
-            - pkg: sneak.berlin/go/dnswatcher/internal/livednstest
-              desc: >-
-                Live-DNS test support belongs in test files and in packages
-                whose directory name ends in test, not in the shipped binary.
-    # Only decisions already recorded in the Go package defaults are
-    # listed here. Every entry matches the module path exactly.
-    gomodguard_v2:
-      blocked:
-        - module: github.com/rs/zerolog
-          recommendations:
-            - log/slog
-          reason: "Structured logging is stdlib log/slog."
-        # One entry per pre-fork module path, because the later releases
-        # are separate paths. A prefix match would be shorter but would
-        # also reach github.com/go-redis/redismock, the test double for
-        # the successor these entries recommend.
-        - module: github.com/go-redis/redis
-          recommendations:
-            - github.com/redis/go-redis/v9
-          reason: "Pre-fork module; use the maintained go-redis v9."
-        - module: github.com/go-redis/redis/v7
-          recommendations:
-            - github.com/redis/go-redis/v9
-          reason: "Pre-fork module; use the maintained go-redis v9."
-        - module: github.com/go-redis/redis/v8
-          recommendations:
-            - github.com/redis/go-redis/v9
-          reason: "Pre-fork module; use the maintained go-redis v9."
-        - module: github.com/sergi/go-diff
-          recommendations:
-            - github.com/aymanbagabas/go-udiff
-          reason: "No unified diff output; use go-udiff."
-        - module: github.com/hexops/gotextdiff
-          recommendations:
-            - github.com/aymanbagabas/go-udiff
-          reason: "Unmaintained fork; use go-udiff."
 
 issues:
   max-issues-per-linter: 0

README.md

@@ -278,7 +278,7 @@ internal/
   tlscheck/tlscheck.go        TLS certificate inspector
   notify/notify.go             Notification service (Slack, Mattermost, ntfy)
   watcher/watcher.go           Main monitoring orchestrator and scheduler
-  livednstest/livednstest.go   Retry and concurrency limit for tests
+  livedns/livedns.go           Retry and concurrency limit for tests
                                against live DNS (imported only by tests)
 ```
 

TESTING.md

@@ -25,7 +25,7 @@ real servers ensures the resolver works correctly in production.
 - Query timeout is calibrated to 3× maximum antipodal RTT (~300ms)
   plus processing margin
 - Root server fan-out is limited to reduce parallel query load
-- Live lookups that expect an answer go through `internal/livednstest`,
+- Live lookups that expect an answer go through `internal/livedns`,
   which limits how many run at once in a test binary and retries a
   lookup that got none
 - Flaky failures from transient network issues are acceptable and

TODO.md

@@ -19,22 +19,13 @@ Rationale, Design, TODO, License, Author) if any are still missing.
 
 # Completed Steps
 
-- 2026-09-29: the live-DNS test package is renamed `internal/livednstest` and
-  added to the `test-support` `deny` list in `.golangci.yml`, so `make lint`
-  fails when program code imports it (closes #164).
-- 2026-09-29: `.golangci.yml` re-fetched unchanged from `sneak/prompts`. It
-  replaces the deprecated `gomodguard` with `gomodguard_v2`, so `make lint` no
-  longer warns about it, and turns on `depguard` with the org `test-support`
-  rule, which rejects `net/http/httptest` except in test files and in files
-  under a directory whose name ends in `test`. This repo had no `deny` entries
-  of its own to carry forward (closes #123).
 - 2026-09-29: nothing stands in for DNS any more. Watcher tests that look
   something up in DNS use the real resolver against live DNS servers and test
   record and nameserver changes by preparing the saved state a check starts
   from; the resolver timeout test queries an address that never answers, and
   `NewFromLoggerWithClient`, used only by its stand-in client, is gone. The
-  live-DNS retry and concurrency limit moved to `internal/livednstest`, which
+  live-DNS retry and concurrency limit moved to `internal/livedns`, which both
-  both test packages use. `TESTING.md` states the README's rule (closes #159).
+  test packages use. `TESTING.md` states the README's rule (closes #159).
 - 2026-09-28: the inconsistency alert is sent once, on the check where two
   nameservers start to disagree or where a nameserver that disagrees first
   appears, instead of on every check while they disagree, and not again after

internal/livedns/livedns.go

@@ -1,4 +1,4 @@
-// Package livednstest runs the live DNS operations of tests. Tests that
+// Package livedns runs the live DNS operations of tests. Tests that
 // look something up in DNS query live DNS servers, never a stand-in —
 // see TESTING.md. Nothing here mocks, fakes, stubs, records or replays
 // DNS, and nothing here skips a test: it only changes *how* the live
@@ -22,7 +22,7 @@
 //     first attempt. A fault in the code under test that leaves
 //     nothing to check looks the same as live DNS not answering, and
 //     fails only after the last attempt.
-package livednstest
+package livedns
 
 import (
 	"context"

internal/livedns/livedns_test.go

@@ -1,4 +1,4 @@
-package livednstest_test
+package livedns_test
 
 import (
 	"context"
@@ -8,7 +8,7 @@ import (
 
 	"github.com/stretchr/testify/assert"
 
-	"sneak.berlin/go/dnswatcher/internal/livednstest"
+	"sneak.berlin/go/dnswatcher/internal/livedns"
 )
 
 // Tests for the retry and the concurrency limit themselves. They
@@ -21,11 +21,11 @@ func TestRetryRecoversFromTransientFailure(t *testing.T) {
 
 	attempts := 0
 
-	livednstest.Retry(t, "transient", func(_ context.Context) error {
+	livedns.Retry(t, "transient", func(_ context.Context) error {
 		attempts++
 
 		if attempts < wantAttempts {
-			return livednstest.ErrNoAnswer
+			return livedns.ErrNoAnswer
 		}
 
 		return nil
@@ -37,19 +37,19 @@ func TestRetryRecoversFromTransientFailure(t *testing.T) {
 func TestRetryGivesEachAttemptADeadline(t *testing.T) {
 	t.Parallel()
 
-	livednstest.Retry(t, "deadline", func(ctx context.Context) error {
+	livedns.Retry(t, "deadline", func(ctx context.Context) error {
 		deadline, ok := ctx.Deadline()
 		assert.True(t, ok, "attempt should carry a deadline")
 
 		remaining := time.Until(deadline)
 
-		assert.LessOrEqual(t, remaining, livednstest.AttemptTimeout)
+		assert.LessOrEqual(t, remaining, livedns.AttemptTimeout)
 
 		// Lower bound too: without one this passes for a
 		// deadline far shorter than intended, which would
 		// silently turn every live attempt into an instant
 		// timeout.
-		assert.Greater(t, remaining, livednstest.AttemptTimeout/2)
+		assert.Greater(t, remaining, livedns.AttemptTimeout/2)
 
 		return nil
 	})
@@ -73,7 +73,7 @@ func TestRunBoundsConcurrency(t *testing.T) {
 		go func() {
 			defer wg.Done()
 
-			_ = livednstest.Run(func(_ context.Context) error {
+			_ = livedns.Run(func(_ context.Context) error {
 				mu.Lock()
 				inFlight++
 
@@ -97,7 +97,7 @@ func TestRunBoundsConcurrency(t *testing.T) {
 
 	assert.Positive(t, maxSeen)
 	assert.LessOrEqual(
-		t, maxSeen, livednstest.Concurrency,
+		t, maxSeen, livedns.Concurrency,
 		"live queries must stay under the package-wide gate",
 	)
 }

internal/resolver/livedns_test.go

@@ -9,7 +9,7 @@ import (
 	"strings"
 	"testing"
 
-	"sneak.berlin/go/dnswatcher/internal/livednstest"
+	"sneak.berlin/go/dnswatcher/internal/livedns"
 	"sneak.berlin/go/dnswatcher/internal/resolver"
 )
 
@@ -20,9 +20,9 @@ import (
 // Tests that look something up in DNS query live DNS servers, never a
 // stand-in; logic that works on record data may be tested on that
 // data with no lookup (see TESTING.md). Each live operation below goes
-// through livednstest.Retry, which bounds how many resolutions are in
+// through livedns.Retry, which bounds how many resolutions are in
 // flight at once and retries an operation that got no answer (see
-// package livednstest).
+// package livedns).
 //
 // Where an assertion spans several independent nameservers, a quorum
 // is enough: a strict majority answering as expected. A server that
@@ -162,7 +162,7 @@ func liveFindAuthoritative(
 
 	var out []string
 
-	livednstest.Retry(
+	livedns.Retry(
 		t,
 		"FindAuthoritativeNameservers("+domain+")",
 		func(ctx context.Context) error {
@@ -174,7 +174,7 @@ func liveFindAuthoritative(
 			if len(ns) == 0 {
 				return fmt.Errorf(
 					"%w: %s has no nameservers",
-					livednstest.ErrNoAnswer, domain,
+					livedns.ErrNoAnswer, domain,
 				)
 			}
 
@@ -198,7 +198,7 @@ func liveLookupNS(
 
 	var out []string
 
-	livednstest.Retry(
+	livedns.Retry(
 		t,
 		"LookupNS("+domain+")",
 		func(ctx context.Context) error {
@@ -210,7 +210,7 @@ func liveLookupNS(
 			if len(ns) == 0 {
 				return fmt.Errorf(
 					"%w: %s has no nameservers",
-					livednstest.ErrNoAnswer, domain,
+					livedns.ErrNoAnswer, domain,
 				)
 			}
 
@@ -240,7 +240,7 @@ func liveQueryNameserver(
 
 	var out *resolver.NameserverResponse
 
-	livednstest.Retry(
+	livedns.Retry(
 		t,
 		what,
 		func(ctx context.Context) error {
@@ -255,7 +255,7 @@ func liveQueryNameserver(
 				resp.Status == resolver.StatusError {
 				return fmt.Errorf(
 					"%w: %s returned %s: %s",
-					livednstest.ErrNoAnswer, nameserver,
+					livedns.ErrNoAnswer, nameserver,
 					resp.Status, resp.Error,
 				)
 			}
@@ -282,7 +282,7 @@ func liveQueryAllNameservers(
 
 	var out map[string]*resolver.NameserverResponse
 
-	livednstest.Retry(
+	livedns.Retry(
 		t,
 		"QueryAllNameservers("+hostname+")",
 		func(ctx context.Context) error {
@@ -294,7 +294,7 @@ func liveQueryAllNameservers(
 			if len(results) == 0 {
 				return fmt.Errorf(
 					"%w: no nameservers queried for %s",
-					livednstest.ErrNoAnswer, hostname,
+					livedns.ErrNoAnswer, hostname,
 				)
 			}
 
@@ -327,7 +327,7 @@ func liveResolveIPs(
 
 	var out []string
 
-	livednstest.Retry(
+	livedns.Retry(
 		t,
 		"ResolveIPAddresses("+hostname+")",
 		func(ctx context.Context) error {
@@ -339,7 +339,7 @@ func liveResolveIPs(
 			if len(ips) == 0 {
 				return fmt.Errorf(
 					"%w: no addresses for %s",
-					livednstest.ErrNoAnswer, hostname,
+					livedns.ErrNoAnswer, hostname,
 				)
 			}
 
@@ -366,7 +366,7 @@ func liveResolveIPsAllowingEmpty(
 
 	var out []string
 
-	livednstest.Retry(
+	livedns.Retry(
 		t,
 		"ResolveIPAddresses("+hostname+")",
 		func(ctx context.Context) error {

internal/resolver/resolver_test.go

@@ -33,7 +33,7 @@ func newTestResolver(t *testing.T) *resolver.Resolver {
 
 // findOneNSForDomain picks one authoritative nameserver to aim a
 // test at. Quorum handling lives in livedns_test.go, and the live-DNS
-// retry and concurrency limit in package livednstest.
+// retry and concurrency limit in package livedns.
 func findOneNSForDomain(
 	t *testing.T,
 	r *resolver.Resolver,

internal/watcher/watcher_test.go

@@ -10,7 +10,7 @@ import (
 	"time"
 
 	"sneak.berlin/go/dnswatcher/internal/config"
-	"sneak.berlin/go/dnswatcher/internal/livednstest"
+	"sneak.berlin/go/dnswatcher/internal/livedns"
 	"sneak.berlin/go/dnswatcher/internal/portcheck"
 	"sneak.berlin/go/dnswatcher/internal/resolver"
 	"sneak.berlin/go/dnswatcher/internal/state"
@@ -195,7 +195,7 @@ func checkOnce(
 			return fmt.Errorf(
 				"%s: %w, or the watcher saved no fresh "+
 					"result for it",
-				name, livednstest.ErrNoAnswer,
+				name, livedns.ErrNoAnswer,
 			)
 		}
 	}
@@ -219,7 +219,7 @@ func runChecks(
 
 	var deps *testDeps
 
-	livednstest.Retry(t, "watcher checks", func(ctx context.Context) error {
+	livedns.Retry(t, "watcher checks", func(ctx context.Context) error {
 		var w *watcher.Watcher
 
 		w, deps = newTestWatcher(t, cfg)