watcher: an IPv6 address is written in brackets before its port (closes #270)

Port and certificate keys were joined as address:port, so an IPv6
address ran into its port: 2a01:4f8:2200:fd11::1:80 is also an address
on its own. Keys are now joined with net.JoinHostPort and split with
net.SplitHostPort, giving [2a01:4f8:2200:fd11::1]:80 in the state file,
/api/v1/status, the dashboard and Port Change notifications; an IPv4
address is unchanged. A certificate key still splits at its last colon,
since a hostname has none. Tests that built IPv6 keys by hand now use
the bracketed form, and a test checks that an IPv6 address's
certificate entry is removed when its port 443 closes.

Model: opus-5-5

README.md

@@ -78,8 +78,9 @@ notification endpoint set, changes show only on the dashboard; see
   answer NXDOMAIN, that it does not exist, has no nameservers and is shown as
   not existing (see Web Dashboard and HTTP API). A domain that exists but has no
   delegation of its own, such as `octocat.github.io`, has no nameservers either.
-  When the parent zone's servers do not answer, the check fails and the set from
+  When the parent zone's servers do not answer, or the lookup of the domain's
-  the previous check is kept.
+  own records (below) fails, the check fails and the set from the previous check
+  is kept.
 - Any change triggers a notification:
     - NS added to or removed from that set. A domain that had nameservers on the
       previous check and no longer exists gets one with all of them removed.
@@ -99,11 +100,16 @@ notification endpoint set, changes show only on the dashboard; see
   records, stored per nameserver. Their changes are notified as a hostname's
   are, as a record change, NS query failure, NS recovery, inconsistency or CNAME
   address change, in a message that starts `Domain:` where a hostname's starts
-  `Hostname:`. A domain listed in `DNSWATCHER_SKIP_RECORD_NOTIFICATIONS` gets no
+  `Hostname:`. A nameserver removed from the domain's delegation gets only the
-  record change or inconsistency notification. A domain with no delegation of
+  NS change notification above. A domain listed in
-  its own has these records asked at the servers of the zone it is in, as a
+  `DNSWATCHER_SKIP_RECORD_NOTIFICATIONS` gets no record change or inconsistency
-  hostname has. A domain that does not exist has none: they are not asked for,
+  notification. A domain with no delegation of its own has these records asked
-  and those saved by an earlier check are removed without a notification.
+  at the servers of the zone it is in, as a hostname has. A nameserver the
+  domain's records were asked at on the previous check but not on this one gets
+  a hostname's NS change notification (see below), unless it was in the domain's
+  delegation on the previous check, as when that delegation is withdrawn. A
+  domain that does not exist has none: they are not asked for, and those saved
+  by an earlier check are removed without a notification.
 
 ### DNS Hostname Monitoring (Subdomains)
 
@@ -156,6 +162,10 @@ notification endpoint set, changes show only on the dashboard; see
     - **NS recovery**: A previously-unreachable nameserver starts responding
       again. Its records are not compared with those from before it failed, so a
       change made while it was failing is not reported as a record change.
+    - **NS change**: A nameserver of the zone the hostname is in on the previous
+      check is not one now, whether or not it answered. One notification lists
+      every such nameserver on a `Removed:` line. Nothing is sent for a
+      nameserver that joins the zone.
     - **Inconsistency detected**: Two nameservers return different record sets
       for the same hostname and did not already differ on the previous check.
       Every pair of nameservers is compared. The alert is sent once for each
@@ -213,8 +223,14 @@ notification endpoint set, changes show only on the dashboard; see
     - Certificate CN, issuer, or SANs changed (replacement detected, reports old
       and new CN and issuer).
     - TLS connection failure to a previously-reachable IP:443 (handshake error,
-      timeout, connection refused after previously succeeding).
+      timeout, or connection refused when port 443 closed after the port check
+      that found it open).
     - TLS recovery: a previously-failing IP:443 now completes a handshake again.
+- A port check that finds port 443 closed removes the certificate entries for
+  that IP address, without a notification of its own: the port change
+  notification reports the closed port. When the port opens again, the next TLS
+  check saves the certificate as new, without a certificate change or recovery
+  notification.
 
 ### Notifications
 
@@ -237,7 +253,9 @@ includes:
 
 - **DNS record changes**: Which hostname or domain, which nameserver, what
   record type, old values, new values.
-- **DNS NS changes**: Which domain, which nameservers were added/removed.
+- **DNS NS changes**: Which domain, which nameservers were added to or removed
+  from its delegation. For a hostname, or a domain with no delegation of its
+  own, which nameservers left the zone it is in.
 - **NS address changes**: Which domain, which nameserver, its old and new
   addresses.
 - **CNAME address changes**: Which hostname or domain, the old and new addresses
@@ -282,8 +300,10 @@ clears them.
   port entry left with no name goes, so the dashboard and `/api/v1/status` no
   longer list or count it. The first check's port checks remove the port entries
   of addresses no configured name has.
-- Each port check also removes the certificate entries for an address their name
+- Each port check also removes, without a notification, the certificate entries
-  no longer resolves to, except while none of the name's nameservers answer.
+  for an address whose port 443 it found closed, and those for an address their
+  name no longer resolves to, except while none of the name's nameservers
+  answer.
 
 ### Web Dashboard
 
@@ -437,7 +457,7 @@ following precedence (highest to lowest):
 | `DNSWATCHER_SENTRY_DSN`                | Sentry DSN for error reporting                                                                                                        | `""`                  |
 | `DNSWATCHER_MAINTENANCE_MODE`          | Only sets `maintenanceMode` in the health check response; changes nothing else                                                        | `false`               |
 | `DNSWATCHER_METRICS_USERNAME`          | Basic auth username for /metrics, which is served only when this is set                                                               | `""`                  |
-| `DNSWATCHER_METRICS_PASSWORD`          | Basic auth password for /metrics                                                                                                      | `""`                  |
+| `DNSWATCHER_METRICS_PASSWORD`          | Basic auth password for /metrics; required when `DNSWATCHER_METRICS_USERNAME` is set, and startup stops without it                    | `""`                  |
 | `DNSWATCHER_SEND_TEST_NOTIFICATION`    | Send a test notification after first scan completes                                                                                   | `false`               |
 
 **`DNSWATCHER_TARGETS` is required.** dnswatcher will refuse to start if no
@@ -463,6 +483,16 @@ or empty variable (`DNSWATCHER_DNS_INTERVAL=`) means the default. If either is
 set to anything else, including a bare number or a zero or negative duration,
 dnswatcher refuses to start with an error naming the variable and the value.
 
+**`PORT` and `DNSWATCHER_TLS_EXPIRY_WARNING`** take a whole number: 1 to 65535
+for `PORT`, and a number of days, 1 or more, for
+`DNSWATCHER_TLS_EXPIRY_WARNING`. `DNSWATCHER_DEBUG`,
+`DNSWATCHER_MAINTENANCE_MODE` and `DNSWATCHER_SEND_TEST_NOTIFICATION` take
+`true` or `false`; `1`, `t`, `T`, `TRUE` and `True` also mean true, and `0`,
+`f`, `F`, `FALSE` and `False` also mean false. An unset or empty variable means
+the default. Any other value, such as `PORT=http`,
+`DNSWATCHER_TLS_EXPIRY_WARNING=7d` or `DNSWATCHER_DEBUG=yes`, makes dnswatcher
+refuse to start with an error naming the variable and the value.
+
 **`DNSWATCHER_SENTRY_DSN` reports crashes in HTTP requests to Sentry.** When it
 is set, a panic in an HTTP request handler is sent to Sentry, and the request
 still gets a `500 Internal Server Error` answer. Nothing else is sent to Sentry:
@@ -636,10 +666,20 @@ for A, AAAA and CNAME, the previous check's list is kept, or `null` when no
 earlier check saved one. A state file without it loads, and the first check
 after that saves it without a notification.
 
+A port entry's key is its address and port, and a certificate entry's key its
+address, port 443 and hostname, joined by colons. An IPv6 address is written in
+brackets in these keys, as in `[2001:db8::1]:443` and
+`[2001:db8::1]:443:www.example.com`. `/api/v1/status` and the dashboard show the
+same keys.
+
 A port entry's `hostnames` lists every name that resolves to its address,
 domains included. A port entry in the older format, with one `hostname` instead
 of the `hostnames` list, loads as a list of that one name.
 
+A state file that leaves out any of `domains`, `hostnames`, `ports` and
+`certificates`, or holds `null` for one, loads with that section empty. A file
+holding `{}` loads as empty state.
+
 ---
 
 ## Entrypoints

TODO.md

@@ -10,17 +10,35 @@
 
 # Status
 
-pre-1.0. No git tags. Work lands on `next` by PR. Open work for 1.0 is tracked
+pre-1.0. Work lands on `next` by PR. Open work for 1.0 is tracked on the 1.0
-on the 1.0 milestone: https://git.eeqj.de/sneak/dnswatcher/milestone/7
+milestone: https://git.eeqj.de/sneak/dnswatcher/milestone/7
 
 # Next Step
 
-trial run of the finished image: https://git.eeqj.de/sneak/dnswatcher/issues/149
+1.0 tracking issue: https://git.eeqj.de/sneak/dnswatcher/issues/66
 
 # Completed Steps
 
+- 2026-10-13: an IPv6 address is written in brackets before its port, as in
+  `[2001:db8::1]:443`, in keys and Port Change notifications (closes #270).
+- 2026-10-13: `TODO.md` names only open issues as next and future steps, and its
+  Status says nothing about git tags (closes #281).
+- 2026-10-13: a port check that finds port 443 closed removes that address's
+  certificate entries, so none is left shown as `ok` (closes #265).
+- 2026-10-13: a state file holding `{}`, or leaving out a section, loads with
+  that section empty; the first check no longer crashes on it (closes #267).
+- 2026-10-13: a stop before the first scan completes sends no startup
+  notification; a scan that ran to the end still sends it (closes #271).
+- 2026-10-13: a nameserver leaving a domain's delegation sends only NS Change;
+  one leaving a hostname's zone sends NS Change, not NS Failure (closes #262).
+- 2026-10-13: `DNSWATCHER_METRICS_USERNAME` set without
+  `DNSWATCHER_METRICS_PASSWORD` stops startup (closes #268).
+- 2026-10-13: a save syncs the state file to disk before renaming it into place,
+  so a crash cannot leave it empty and stop the next start (closes #264).
 - 2026-10-13: a `PORT` that cannot be bound stops startup with an error naming
   the address, instead of running without the HTTP server (closes #266).
+- 2026-10-13: a bad `PORT`, `DNSWATCHER_TLS_EXPIRY_WARNING` or true/false
+  setting stops startup instead of being read as 0 or false (closes #269).
 - 2026-10-13: a check saving the state while the dashboard or `/api/v1/status`
   is read cannot crash the process (closes #261).
 - 2026-10-06: canonical files re-fetched from `sneak/prompts` at `dd4027b`; lint
@@ -187,6 +205,4 @@ trial run of the finished image: https://git.eeqj.de/sneak/dnswatcher/issues/149
 
 # Future Steps
 
-- 1.0 readiness: run it with a real config and read the logs:
+- DNSSEC validation, after 1.0: https://git.eeqj.de/sneak/dnswatcher/issues/59
-  https://git.eeqj.de/sneak/dnswatcher/issues/66
-- review toward 1.0: https://git.eeqj.de/sneak/dnswatcher/issues/144

internal/config/config.go

@@ -6,6 +6,7 @@ import (
 	"fmt"
 	"log/slog"
 	"slices"
+	"strconv"
 	"strings"
 	"time"
 
@@ -24,6 +25,9 @@ const (
 	defaultTLSExpiryWarning = 7
 )
 
+// maxPort is the highest TCP port number.
+const maxPort = 65535
+
 // ErrNoTargets is returned when no monitoring targets are configured.
 var ErrNoTargets = errors.New(
 	"no monitoring targets configured: set DNSWATCHER_TARGETS environment variable",
@@ -40,6 +44,30 @@ var ErrInvalidInterval = errors.New(
 // lists a name that is not in DNSWATCHER_TARGETS.
 var ErrNotInTargets = errors.New("name is not in DNSWATCHER_TARGETS")
 
+// ErrInvalidPort is returned when PORT is set but is not a whole number
+// from 1 to 65535. An empty value counts as unset and means the default.
+var ErrInvalidPort = errors.New("port must be a whole number from 1 to 65535")
+
+// ErrInvalidTLSExpiryWarning is returned when DNSWATCHER_TLS_EXPIRY_WARNING
+// is set but is not a whole number, 1 or more. An empty value counts as unset
+// and means the default.
+var ErrInvalidTLSExpiryWarning = errors.New(
+	"TLS expiry warning must be a whole number of days, 1 or more",
+)
+
+// ErrInvalidBool is returned when DNSWATCHER_DEBUG,
+// DNSWATCHER_MAINTENANCE_MODE or DNSWATCHER_SEND_TEST_NOTIFICATION is set
+// but is not a value strconv.ParseBool accepts. An empty value counts as
+// unset and means the default.
+var ErrInvalidBool = errors.New("value must be true or false")
+
+// ErrNoMetricsPassword is returned when DNSWATCHER_METRICS_USERNAME is set and
+// DNSWATCHER_METRICS_PASSWORD is empty. Basic Auth on /metrics would otherwise
+// let in anyone who sends the username with an empty password.
+var ErrNoMetricsPassword = errors.New(
+	"DNSWATCHER_METRICS_PASSWORD must be set when DNSWATCHER_METRICS_USERNAME is set",
+)
+
 // Params contains dependencies for Config.
 type Params struct {
 	fx.In
@@ -87,6 +115,10 @@ func New(_ fx.Lifecycle, params Params) (*Config, error) {
 		return nil, err
 	}
 
+	if cfg.MetricsUsername != "" && cfg.MetricsPassword == "" {
+		return nil, ErrNoMetricsPassword
+	}
+
 	configureDebugLogging(cfg, params)
 
 	return cfg, nil
@@ -127,16 +159,9 @@ func buildConfig(
 	log *slog.Logger,
 	params *Params,
 ) (*Config, error) {
-	err := viper.ReadInConfig()
+	err := readConfigFile(log)
 	if err != nil {
-		var notFound viper.ConfigFileNotFoundError
+		return nil, err
-		if !errors.As(err, &notFound) {
-			log.Error("config file malformed", "error", err)
-
-			return nil, fmt.Errorf(
-				"config file malformed: %w", err,
-			)
-		}
 	}
 
 	dnsInterval, err := parseInterval("DNS_INTERVAL")
@@ -161,9 +186,34 @@ func buildConfig(
 		return nil, err
 	}
 
+	port, err := parsePort()
+	if err != nil {
+		return nil, err
+	}
+
+	tlsExpiryWarning, err := parseTLSExpiryWarning()
+	if err != nil {
+		return nil, err
+	}
+
+	debug, err := parseBool("DEBUG")
+	if err != nil {
+		return nil, err
+	}
+
+	maintenanceMode, err := parseBool("MAINTENANCE_MODE")
+	if err != nil {
+		return nil, err
+	}
+
+	sendTestNotification, err := parseBool("SEND_TEST_NOTIFICATION")
+	if err != nil {
+		return nil, err
+	}
+
 	cfg := &Config{
-		Port:                    viper.GetInt("PORT"),
+		Port:                    port,
-		Debug:                   viper.GetBool("DEBUG"),
+		Debug:                   debug,
 		DataDir:                 viper.GetString("DATA_DIR"),
 		Domains:                 domains,
 		Hostnames:               hostnames,
@@ -173,12 +223,12 @@ func buildConfig(
 		NtfyTopic:               viper.GetString("NTFY_TOPIC"),
 		DNSInterval:             dnsInterval,
 		TLSInterval:             tlsInterval,
-		TLSExpiryWarning:        viper.GetInt("TLS_EXPIRY_WARNING"),
+		TLSExpiryWarning:        tlsExpiryWarning,
 		SentryDSN:               viper.GetString("SENTRY_DSN"),
-		MaintenanceMode:         viper.GetBool("MAINTENANCE_MODE"),
+		MaintenanceMode:         maintenanceMode,
 		MetricsUsername:         viper.GetString("METRICS_USERNAME"),
 		MetricsPassword:         viper.GetString("METRICS_PASSWORD"),
-		SendTestNotification:    viper.GetBool("SEND_TEST_NOTIFICATION"),
+		SendTestNotification:    sendTestNotification,
 		params:                  params,
 		log:                     log,
 	}
@@ -186,6 +236,21 @@ func buildConfig(
 	return cfg, nil
 }
 
+// readConfigFile reads the config file, if there is one.
+func readConfigFile(log *slog.Logger) error {
+	err := viper.ReadInConfig()
+	if err != nil {
+		var notFound viper.ConfigFileNotFoundError
+		if !errors.As(err, &notFound) {
+			log.Error("config file malformed", "error", err)
+
+			return fmt.Errorf("config file malformed: %w", err)
+		}
+	}
+
+	return nil
+}
+
 // parseInterval reads the DNSWATCHER_-prefixed setting key as a duration. A
 // value that does not parse, or is zero or negative, is an error naming the
 // variable and the value; an unset variable has its default from setupViper.
@@ -202,6 +267,53 @@ func parseInterval(key string) (time.Duration, error) {
 	return interval, nil
 }
 
+// parsePort reads PORT, which has no DNSWATCHER_ prefix, as a port number. A
+// value that is not a whole number from 1 to 65535 is an error naming the
+// variable and the value; an unset variable has its default from setupViper.
+func parsePort() (int, error) {
+	value := viper.GetString("PORT")
+
+	port, err := strconv.Atoi(value)
+	if err != nil || port < 1 || port > maxPort {
+		return 0, fmt.Errorf("invalid PORT %q: %w", value, ErrInvalidPort)
+	}
+
+	return port, nil
+}
+
+// parseTLSExpiryWarning reads DNSWATCHER_TLS_EXPIRY_WARNING as a number of
+// days. A value that is not a whole number, 1 or more, is an error naming the
+// variable and the value; an unset variable has its default from setupViper.
+func parseTLSExpiryWarning() (int, error) {
+	value := viper.GetString("TLS_EXPIRY_WARNING")
+
+	days, err := strconv.Atoi(value)
+	if err != nil || days < 1 {
+		return 0, fmt.Errorf(
+			"invalid DNSWATCHER_TLS_EXPIRY_WARNING %q: %w",
+			value, ErrInvalidTLSExpiryWarning,
+		)
+	}
+
+	return days, nil
+}
+
+// parseBool reads the DNSWATCHER_-prefixed setting key as true or false. A
+// value strconv.ParseBool does not accept is an error naming the variable and
+// the value; an unset variable has its default from setupViper.
+func parseBool(key string) (bool, error) {
+	value := viper.GetString(key)
+
+	result, err := strconv.ParseBool(value)
+	if err != nil {
+		return false, fmt.Errorf(
+			"invalid DNSWATCHER_%s %q: %w", key, value, ErrInvalidBool,
+		)
+	}
+
+	return result, nil
+}
+
 func parseAndValidateTargets() ([]string, []string, error) {
 	domains, hostnames, err := ClassifyTargets(
 		parseCSV(viper.GetString("TARGETS")),

internal/config/config_test.go

@@ -116,7 +116,7 @@ func TestNew_OnlyEmptyCSVSegments(t *testing.T) {
 }
 
 // TestNew_InvalidIntervalStopsStartup checks values that must stop startup;
-// TestNew_DefaultValues and TestNew_EmptyIntervalMeansDefault check that an
+// TestNew_DefaultValues and TestNew_EmptyValueMeansDefault check that an
 // unset or empty interval means the default.
 func TestNew_InvalidIntervalStopsStartup(t *testing.T) {
 	variables := []string{"DNSWATCHER_DNS_INTERVAL", "DNSWATCHER_TLS_INTERVAL"}
@@ -144,16 +144,107 @@ func TestNew_InvalidIntervalStopsStartup(t *testing.T) {
 	}
 }
 
-func TestNew_EmptyIntervalMeansDefault(t *testing.T) {
+func TestNew_EmptyValueMeansDefault(t *testing.T) {
 	viper.Reset()
 	t.Setenv("DNSWATCHER_TARGETS", "example.com")
 	t.Setenv("DNSWATCHER_DNS_INTERVAL", "")
 	t.Setenv("DNSWATCHER_TLS_INTERVAL", "")
+	t.Setenv("PORT", "")
+	t.Setenv("DNSWATCHER_TLS_EXPIRY_WARNING", "")
+	t.Setenv("DNSWATCHER_DEBUG", "")
+	t.Setenv("DNSWATCHER_MAINTENANCE_MODE", "")
+	t.Setenv("DNSWATCHER_SEND_TEST_NOTIFICATION", "")
 
 	cfg, err := config.New(nil, newTestParams(t))
 	require.NoError(t, err)
 	assert.Equal(t, time.Hour, cfg.DNSInterval)
 	assert.Equal(t, 12*time.Hour, cfg.TLSInterval)
+	assert.Equal(t, 8080, cfg.Port)
+	assert.Equal(t, 7, cfg.TLSExpiryWarning)
+	assert.False(t, cfg.Debug)
+	assert.False(t, cfg.MaintenanceMode)
+	assert.False(t, cfg.SendTestNotification)
+}
+
+// TestNew_InvalidNumberOrBoolStopsStartup checks values that must stop
+// startup; TestNew_EnvironmentOverrides, the two tests after this one and
+// TestNew_EmptyValueMeansDefault check values that must not.
+func TestNew_InvalidNumberOrBoolStopsStartup(t *testing.T) {
+	notBools := []string{"yes", "on", "2", "tRUE"}
+	tests := []struct {
+		variable string
+		values   []string
+		want     error
+	}{
+		{
+			variable: "PORT",
+			values:   []string{"notaport", "0", "-1", "65536", "8080.5"},
+			want:     config.ErrInvalidPort,
+		},
+		{
+			variable: "DNSWATCHER_TLS_EXPIRY_WARNING",
+			values:   []string{"abc", "7d", "0", "-5"},
+			want:     config.ErrInvalidTLSExpiryWarning,
+		},
+		{
+			variable: "DNSWATCHER_DEBUG",
+			values:   notBools,
+			want:     config.ErrInvalidBool,
+		},
+		{
+			variable: "DNSWATCHER_MAINTENANCE_MODE",
+			values:   notBools,
+			want:     config.ErrInvalidBool,
+		},
+		{
+			variable: "DNSWATCHER_SEND_TEST_NOTIFICATION",
+			values:   notBools,
+			want:     config.ErrInvalidBool,
+		},
+	}
+
+	for _, tt := range tests {
+		for _, value := range tt.values {
+			t.Run(tt.variable+"="+value, func(t *testing.T) {
+				viper.Reset()
+				t.Setenv("DNSWATCHER_TARGETS", "example.com")
+				t.Setenv(tt.variable, value)
+
+				_, err := config.New(nil, newTestParams(t))
+				require.ErrorIs(t, err, tt.want)
+				require.ErrorContains(t, err, tt.variable)
+				require.ErrorContains(t, err, strconv.Quote(value))
+			})
+		}
+	}
+}
+
+func TestNew_LowestNumbersAndOtherSpellingsOfTrue(t *testing.T) {
+	viper.Reset()
+	t.Setenv("DNSWATCHER_TARGETS", "example.com")
+	t.Setenv("PORT", "1")
+	t.Setenv("DNSWATCHER_TLS_EXPIRY_WARNING", "1")
+	t.Setenv("DNSWATCHER_DEBUG", "1")
+	t.Setenv("DNSWATCHER_MAINTENANCE_MODE", "T")
+	t.Setenv("DNSWATCHER_SEND_TEST_NOTIFICATION", "True")
+
+	cfg, err := config.New(nil, newTestParams(t))
+	require.NoError(t, err)
+	assert.Equal(t, 1, cfg.Port)
+	assert.Equal(t, 1, cfg.TLSExpiryWarning)
+	assert.True(t, cfg.Debug)
+	assert.True(t, cfg.MaintenanceMode)
+	assert.True(t, cfg.SendTestNotification)
+}
+
+func TestNew_HighestPort(t *testing.T) {
+	viper.Reset()
+	t.Setenv("DNSWATCHER_TARGETS", "example.com")
+	t.Setenv("PORT", "65535")
+
+	cfg, err := config.New(nil, newTestParams(t))
+	require.NoError(t, err)
+	assert.Equal(t, 65535, cfg.Port)
 }
 
 func TestNew_DebugEnablesDebugLogging(t *testing.T) {
@@ -263,6 +354,24 @@ func TestNew_SkipRecordNotificationsNotInTargetsStopsStartup(t *testing.T) {
 	require.ErrorContains(t, err, `"www.example.net"`)
 }
 
+// TestNew_MetricsUsernameWithoutPasswordStopsStartup checks an unset and an
+// empty password; TestNew_EnvironmentOverrides checks a username with one.
+func TestNew_MetricsUsernameWithoutPasswordStopsStartup(t *testing.T) {
+	viper.Reset()
+	t.Setenv("DNSWATCHER_TARGETS", "example.com")
+	t.Setenv("DNSWATCHER_METRICS_USERNAME", "prom")
+
+	_, err := config.New(nil, newTestParams(t))
+	require.ErrorIs(t, err, config.ErrNoMetricsPassword, "password unset")
+	require.ErrorContains(t, err, "DNSWATCHER_METRICS_PASSWORD")
+
+	viper.Reset()
+	t.Setenv("DNSWATCHER_METRICS_PASSWORD", "")
+
+	_, err = config.New(nil, newTestParams(t))
+	require.ErrorIs(t, err, config.ErrNoMetricsPassword, "password empty")
+}
+
 func TestNew_CustomDNSIntervalDuration(t *testing.T) {
 	viper.Reset()
 	t.Setenv("DNSWATCHER_TARGETS", "example.com")

internal/state/state.go

@@ -4,6 +4,7 @@ package state
 import (
 	"context"
 	"encoding/json"
+	"errors"
 	"fmt"
 	"log/slog"
 	"maps"
@@ -215,6 +216,24 @@ func (s *State) Load() error {
 		return fmt.Errorf("parsing state file: %w", err)
 	}
 
+	// A section the file leaves out, or holds as null, loads empty: the
+	// setters write into these maps, and writing into a nil map panics.
+	if snapshot.Domains == nil {
+		snapshot.Domains = make(map[string]*DomainState)
+	}
+
+	if snapshot.Hostnames == nil {
+		snapshot.Hostnames = make(map[string]*HostnameState)
+	}
+
+	if snapshot.Ports == nil {
+		snapshot.Ports = make(map[string]*PortState)
+	}
+
+	if snapshot.Certificates == nil {
+		snapshot.Certificates = make(map[string]*CertificateState)
+	}
+
 	// A state file saved before each record value was stored once can
 	// hold a hostname's CNAME once for every record type asked for.
 	// Each value is kept once, so the first check does not see a
@@ -253,10 +272,20 @@ func (s *State) Save() error {
 		return fmt.Errorf("creating data directory: %w", err)
 	}
 
-	// Atomic write: write to temp file, then rename
+	// Atomic write: write to temp file, then rename. The temp file is
+	// synced before the rename and the directory after it, or a crash
+	// can leave the renamed state file empty.
 	tmpPath := path + ".tmp"
 
-	err = os.WriteFile(tmpPath, data, filePermissions)
+	//nolint:gosec // path is from trusted config
+	tmpFile, err := os.OpenFile(
+		tmpPath, os.O_WRONLY|os.O_CREATE|os.O_TRUNC, filePermissions,
+	)
+	if err == nil {
+		_, err = tmpFile.Write(data)
+		err = errors.Join(err, tmpFile.Sync(), tmpFile.Close())
+	}
+
 	if err != nil {
 		return fmt.Errorf("writing temp state file: %w", err)
 	}
@@ -266,6 +295,15 @@ func (s *State) Save() error {
 		return fmt.Errorf("renaming state file: %w", err)
 	}
 
+	dir, err := os.Open(filepath.Dir(path))
+	if err == nil {
+		err = errors.Join(dir.Sync(), dir.Close())
+	}
+
+	if err != nil {
+		return fmt.Errorf("syncing data directory: %w", err)
+	}
+
 	s.log.Debug("state saved to disk", "path", path)
 
 	return nil

internal/state/state_test.go

@@ -618,6 +618,53 @@ func TestSaveAtomicWrite(t *testing.T) {
 	}
 }
 
+// TestSaveOverLeftoverTempFile verifies that a temp file left by a
+// crash, longer than the state Save writes, leaves nothing of itself in
+// the state file, and that no temp file remains after Save.
+func TestSaveOverLeftoverTempFile(t *testing.T) {
+	t.Parallel()
+
+	dir := t.TempDir()
+	statePath := filepath.Join(dir, "state.json")
+	tmpPath := statePath + ".tmp"
+
+	err := os.WriteFile(tmpPath, []byte(strings.Repeat("x", 64*1024)), 0o600)
+	if err != nil {
+		t.Fatalf("writing leftover temp file: %v", err)
+	}
+
+	s := state.NewForTestWithDataDir(dir)
+
+	populateState(t, s)
+
+	err = s.Save()
+	if err != nil {
+		t.Fatalf("Save() error: %v", err)
+	}
+
+	//nolint:gosec // test file with known path
+	data, err := os.ReadFile(statePath)
+	if err != nil {
+		t.Fatalf("reading state file: %v", err)
+	}
+
+	var snap state.Snapshot
+
+	err = json.Unmarshal(data, &snap)
+	if err != nil {
+		t.Fatalf("state file is not complete JSON: %v", err)
+	}
+
+	if len(snap.Domains) != 2 {
+		t.Errorf("state file has %d domains, want 2", len(snap.Domains))
+	}
+
+	_, err = os.Stat(tmpPath)
+	if !os.IsNotExist(err) {
+		t.Error("temp file should not exist after save")
+	}
+}
+
 // TestLoadMissingFile verifies that loading a nonexistent file is not an error.
 func TestLoadMissingFile(t *testing.T) {
 	t.Parallel()
@@ -648,6 +695,58 @@ func TestLoadMissingFile(t *testing.T) {
 	}
 }
 
+// TestLoadFileWithoutSections loads a state file holding {}, and files
+// that each leave out one section. Every section loads as an empty map.
+// TestFirstCheckAfterLoadingFileWithoutSections in the watcher tests
+// runs the first check after such a load.
+func TestLoadFileWithoutSections(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		name string
+		file string
+	}{
+		{"no sections", `{}`},
+		{"no domains", `{"hostnames": {}, "ports": {}, "certificates": {}}`},
+		{"no hostnames", `{"domains": {}, "ports": {}, "certificates": {}}`},
+		{"no ports", `{"domains": {}, "hostnames": {}, "certificates": {}}`},
+		{"no certificates", `{"domains": {}, "hostnames": {}, "ports": {}}`},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			dir := t.TempDir()
+
+			err := os.WriteFile(
+				filepath.Join(dir, "state.json"), []byte(tt.file), 0o600,
+			)
+			if err != nil {
+				t.Fatalf("writing state file: %v", err)
+			}
+
+			s := state.NewForTestWithDataDir(dir)
+
+			err = s.Load()
+			if err != nil {
+				t.Fatalf("Load() error: %v", err)
+			}
+
+			want := state.Snapshot{
+				Domains:      map[string]*state.DomainState{},
+				Hostnames:    map[string]*state.HostnameState{},
+				Ports:        map[string]*state.PortState{},
+				Certificates: map[string]*state.CertificateState{},
+			}
+
+			if got := s.GetSnapshot(); !reflect.DeepEqual(got, want) {
+				t.Errorf("loaded %#v, want %#v", got, want)
+			}
+		})
+	}
+}
+
 // TestLoadCorruptFile verifies that a corrupt state file returns an error.
 func TestLoadCorruptFile(t *testing.T) {
 	t.Parallel()

internal/watcher/cancelled_test.go

@@ -83,6 +83,30 @@ func TestCancelledCheckSavesNothing(t *testing.T) {
 	}
 }
 
+// TestStopBeforeFirstScanSendsNoStartupNotification runs a watcher with
+// the startup notification on and its context already cancelled, so the
+// first scan is cut short before its lookup is sent. The scan did not
+// complete, so no startup notification may be sent.
+func TestStopBeforeFirstScanSendsNoStartupNotification(t *testing.T) {
+	t.Parallel()
+
+	cfg := defaultTestConfig(t)
+	cfg.Hostnames = []string{testHost}
+	cfg.SendTestNotification = true
+
+	w, deps := newTestWatcher(t, cfg)
+
+	ctx, cancel := context.WithCancel(t.Context())
+	cancel()
+
+	w.Run(ctx)
+
+	notifications := deps.notifier.getNotifications()
+	if len(notifications) != 0 {
+		t.Errorf("sent %v, want no notifications", notifications)
+	}
+}
+
 // newLoggingWatcher returns a watcher for a domain and a hostname, with
 // the real resolver, that writes what it logs at warning level or above
 // into the returned buffer.

internal/watcher/ipv6_test.go

@@ -0,0 +1,83 @@
+package watcher_test
+
+import (
+	"maps"
+	"slices"
+	"testing"
+
+	"sneak.berlin/go/dnswatcher/internal/state"
+	"sneak.berlin/go/dnswatcher/internal/watcher"
+)
+
+// TestIPv6AddressInBrackets runs the port checks, not the watcher's
+// first, on hostname state built here for a hostname at an IPv6 address
+// whose port 443 the previous check found closed. It is open now. Then
+// it runs the TLS checks and the port checks again. The port and
+// certificate keys and the Port Change notification write the address
+// in brackets, so its last group cannot be read as the port, and the
+// second port checks keep the certificate entry, whose address they read
+// back from its key. When a last port check finds port 443 closed, the
+// certificate entry is removed. Nothing is looked up.
+func TestIPv6AddressInBrackets(t *testing.T) {
+	t.Parallel()
+
+	const aaaaType = "AAAA"
+
+	cfg := defaultTestConfig(t)
+	cfg.Hostnames = []string{host}
+
+	deps := newTestDeps(t, cfg)
+	w := watcher.NewForTest(
+		cfg, deps.state, nil,
+		deps.portChecker, deps.tlsChecker, deps.notifier,
+	)
+	w.SetFirstRun(false)
+
+	deps.state.SetHostnameState(host, saved(
+		map[string]*state.NameserverRecordState{
+			nsA: answered(map[string][]string{aaaaType: {"2001:db8::1"}}),
+		},
+	))
+	deps.state.SetPortState("[2001:db8::1]:443", &state.PortState{
+		Hostnames: []string{host},
+	})
+
+	w.CheckAllPorts(t.Context())
+	w.RunTLSChecks(t.Context())
+	w.CheckAllPorts(t.Context())
+
+	snap := deps.state.GetSnapshot()
+
+	gotPorts := slices.Sorted(maps.Keys(snap.Ports))
+	wantPorts := []string{"[2001:db8::1]:443", "[2001:db8::1]:80"}
+
+	if !slices.Equal(gotPorts, wantPorts) {
+		t.Errorf("port entries %v, want %v", gotPorts, wantPorts)
+	}
+
+	gotCerts := slices.Sorted(maps.Keys(snap.Certificates))
+	wantCerts := []string{"[2001:db8::1]:443:www.example.net"}
+
+	if !slices.Equal(gotCerts, wantCerts) {
+		t.Errorf("certificate entries %v, want %v", gotCerts, wantCerts)
+	}
+
+	title := "Port Change: [2001:db8::1]:443"
+	want := `Hostnames: www.example.net
+Address: [2001:db8::1]:443
+Port now open`
+
+	got := deps.notifier.getNotifications()
+	if len(got) != 1 || got[0].Title != title || got[0].Message != want {
+		t.Errorf("sent %v, want one %q with message:\n%s", got, title, want)
+	}
+
+	deps.portChecker.closed = true
+
+	w.CheckAllPorts(t.Context())
+
+	gotCerts = slices.Sorted(maps.Keys(deps.state.GetSnapshot().Certificates))
+	if len(gotCerts) != 0 {
+		t.Errorf("certificate entries %v with port 443 closed, want none", gotCerts)
+	}
+}

internal/watcher/message_test.go

@@ -5,7 +5,6 @@ import (
 	"strings"
 	"testing"
 
-	"sneak.berlin/go/dnswatcher/internal/config"
 	"sneak.berlin/go/dnswatcher/internal/state"
 	"sneak.berlin/go/dnswatcher/internal/watcher"
 )
@@ -74,21 +73,19 @@ b.ns.example.net.: 192.0.2.2`,
 func TestDomainRecordNotificationsNameTheDomain(t *testing.T) {
 	t.Parallel()
 
-	notifier := &mockNotifier{}
+	cfg := defaultTestConfig(t)
-	w := watcher.NewForTest(
+	cfg.Domains = []string{domain}
-		&config.Config{Domains: []string{domain}},
+
-		nil, nil, nil, nil, notifier,
+	deps := newTestDeps(t, cfg)
-	)
+	w := watcher.NewForTest(cfg, deps.state, nil, nil, nil, deps.notifier)
 
 	// nsA's address changes, which also makes it differ from nsC; nsB
-	// fails; nsC answers again; nsD is gone.
+	// fails; nsC answers again.
-	nsD := "d.ns.example.net."
 	w.DetectHostnameChanges(t.Context(), domain,
 		saved(map[string]*state.NameserverRecordState{
 			nsA: answered(map[string][]string{"A": {ip1}}),
 			nsB: answered(map[string][]string{"A": {ip1}}),
 			nsC: failed(),
-			nsD: answered(map[string][]string{"A": {ip1}}),
 		}),
 		saved(map[string]*state.NameserverRecordState{
 			nsA: answered(map[string][]string{"A": {ip2}}),
@@ -102,18 +99,17 @@ func TestDomainRecordNotificationsNameTheDomain(t *testing.T) {
 		t.Context(), domain, cnameState(ip1), cnameState(ip2),
 	)
 
-	// NS Failure is sent for nsB failing and for nsD being gone.
 	want := map[string]int{
 		"Record Change":        1,
 		"Inconsistency":        1,
-		"NS Failure":           2,
+		"NS Failure":           1,
 		"NS Recovery":          1,
 		"CNAME Address Change": 1,
 	}
 
 	sent := make(map[string]int)
 
-	for _, n := range notifier.getNotifications() {
+	for _, n := range deps.notifier.getNotifications() {
 		kind, _, _ := strings.Cut(n.Title, ":")
 		sent[kind]++
 
@@ -128,6 +124,89 @@ func TestDomainRecordNotificationsNameTheDomain(t *testing.T) {
 	}
 }
 
+// nsB, which answered, and nsC, which did not, are no longer among the
+// nameservers. One NS Change lists both, for the hostname and for the
+// configured apex domain with no delegation of its own. Nothing is sent
+// for the domain whose delegation on the previous check listed them:
+// the check of its delegation sends its NS Change.
+func TestRemovedNameserversAreAnNSChange(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		name   string
+		target string
+		// The domain's nameservers saved by the previous check.
+		delegation []string
+		// The NS Change sent, or "" for none.
+		want string
+	}{
+		{
+			name:   "hostname",
+			target: host,
+			want: `Hostname: www.example.net
+Removed: b.ns.example.net., c.ns.example.net.`,
+		},
+		{
+			name:       "domain with no delegation of its own",
+			target:     domain,
+			delegation: []string{},
+			want: `Domain: example.net
+Removed: b.ns.example.net., c.ns.example.net.`,
+		},
+		{
+			name:       "domain whose delegation listed them",
+			target:     domain,
+			delegation: []string{nsA, nsB, nsC},
+		},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			cfg := defaultTestConfig(t)
+			cfg.Domains = []string{domain}
+
+			deps := newTestDeps(t, cfg)
+			w := watcher.NewForTest(
+				cfg, deps.state, nil, nil, nil, deps.notifier,
+			)
+
+			deps.state.SetDomainState(domain, &state.DomainState{
+				Nameservers: tt.delegation,
+			})
+
+			prev := saved(map[string]*state.NameserverRecordState{
+				nsA: answered(map[string][]string{"A": {ip1}}),
+				nsB: answered(map[string][]string{"A": {ip1}}),
+				nsC: failed(),
+			})
+			current := saved(map[string]*state.NameserverRecordState{
+				nsA: answered(map[string][]string{"A": {ip1}}),
+			})
+
+			w.DetectHostnameChanges(t.Context(), tt.target, prev, current)
+
+			got := deps.notifier.getNotifications()
+
+			if tt.want == "" {
+				if len(got) != 0 {
+					t.Errorf("sent %v, want nothing", got)
+				}
+
+				return
+			}
+
+			title := "NS Change: " + tt.target
+			if len(got) != 1 || got[0].Title != title ||
+				got[0].Message != tt.want {
+				t.Errorf("sent %v, want one %q with message:\n%s",
+					got, title, tt.want)
+			}
+		})
+	}
+}
+
 // The startup notification counts the configured domains and hostnames,
 // although the state's hostnames also hold the apex domain's own
 // records. Nothing is looked up: the watcher has no resolver.

internal/watcher/removed_test.go

@@ -2,7 +2,9 @@ package watcher_test
 
 import (
 	"maps"
+	"net"
 	"slices"
+	"strings"
 	"testing"
 
 	"sneak.berlin/go/dnswatcher/internal/state"
@@ -172,7 +174,7 @@ func TestCertificateStateForAnAddressGone(t *testing.T) {
 					"A": {ip1}, "AAAA": {ip6},
 				}),
 			}),
-			[]string{ip1 + ":443:" + host, ip6 + ":443:" + host},
+			[]string{ip1 + ":443:" + host, "[" + ip6 + "]:443:" + host},
 		},
 		{
 			"no nameserver answered",
@@ -182,7 +184,7 @@ func TestCertificateStateForAnAddressGone(t *testing.T) {
 			[]string{
 				ip1 + ":443:" + host,
 				ip2 + ":443:" + host,
-				ip6 + ":443:" + host,
+				"[" + ip6 + "]:443:" + host,
 			},
 		},
 	}
@@ -205,7 +207,8 @@ func TestCertificateStateForAnAddressGone(t *testing.T) {
 
 			for _, ip := range []string{ip1, ip2, ip6} {
 				deps.state.SetCertificateState(
-					ip+":443:"+host, &state.CertificateState{Status: "ok"},
+					net.JoinHostPort(ip, "443")+":"+host,
+					&state.CertificateState{Status: "ok"},
 				)
 			}
 
@@ -222,3 +225,67 @@ func TestCertificateStateForAnAddressGone(t *testing.T) {
 		})
 	}
 }
+
+// TestCertificateStateForAPortClosed runs the port checks on hostname
+// and port state built here for a configured hostname at ip1, whose
+// port 443 the previous check found open and whose certificate entry
+// is ok. The port is closed now: the certificate entry is removed, and
+// only the Port Change is notified. When the port opens again, the next
+// TLS check saves the certificate as new and notifies nothing about it.
+// Nothing is looked up.
+func TestCertificateStateForAPortClosed(t *testing.T) {
+	t.Parallel()
+
+	cfg := defaultTestConfig(t)
+	cfg.Hostnames = []string{host}
+
+	deps := newTestDeps(t, cfg)
+	w := watcher.NewForTest(
+		cfg, deps.state, nil,
+		deps.portChecker, deps.tlsChecker, deps.notifier,
+	)
+	w.SetFirstRun(false)
+
+	certKey := ip1 + ":443:" + host
+
+	deps.state.SetHostnameState(host, saved(
+		map[string]*state.NameserverRecordState{
+			nsA: answered(map[string][]string{"A": {ip1}}),
+		},
+	))
+	deps.state.SetPortState(ip1+":443", &state.PortState{
+		Open: true, Hostnames: []string{host},
+	})
+	deps.state.SetCertificateState(certKey, &state.CertificateState{
+		CommonName: host, Status: "ok",
+	})
+	deps.portChecker.closed = true
+
+	w.CheckAllPorts(t.Context())
+
+	if _, ok := deps.state.GetCertificateState(certKey); ok {
+		t.Errorf("certificate entry %s kept with port 443 closed", certKey)
+	}
+
+	sent := deps.notifier.getNotifications()
+	if title := "Port Change: " + ip1 + ":443"; len(sent) != 1 ||
+		sent[0].Title != title {
+		t.Errorf("sent %v, want one %q", sent, title)
+	}
+
+	deps.portChecker.closed = false
+
+	w.CheckAllPorts(t.Context())
+	w.RunTLSChecks(t.Context())
+
+	cert, ok := deps.state.GetCertificateState(certKey)
+	if !ok || cert.Status != "ok" {
+		t.Errorf("certificate entry %s after port 443 opened: %+v", certKey, cert)
+	}
+
+	for _, n := range deps.notifier.getNotifications() {
+		if strings.HasPrefix(n.Title, "TLS") {
+			t.Errorf("sent %v, want no TLS notification", n)
+		}
+	}
+}

internal/watcher/watcher.go

@@ -6,8 +6,10 @@ import (
 	"fmt"
 	"log/slog"
 	"maps"
+	"net"
 	"slices"
 	"sort"
+	"strconv"
 	"strings"
 	"time"
 
@@ -133,7 +135,12 @@ func (w *Watcher) Run(ctx context.Context) {
 
 	w.cleanupRemovedTargets()
 	w.RunOnce(ctx)
-	w.maybeSendTestNotification(ctx)
+
+	// RunOnce returns as usual when shutdown cuts the scan short, and
+	// the startup notification says the scan completed.
+	if ctx.Err() == nil {
+		w.maybeSendTestNotification(ctx)
+	}
 
 	dnsTicker := time.NewTicker(w.config.DNSInterval)
 	tlsTicker := time.NewTicker(w.config.TLSInterval)
@@ -322,6 +329,20 @@ func (w *Watcher) checkDomain(
 		ctx, nameservers, prevAddresses,
 	)
 
+	// A domain that does not exist has no records of its own: none are
+	// asked for, and those saved by an earlier check are removed.
+	// Otherwise the apex domain's records are also checked and saved as
+	// a hostname's, so that the port and TLS checks find its addresses.
+	// Notifications about them name it as a domain (see nameLine). When
+	// their lookup fails, the check fails as when the NS lookup does, so
+	// the saved delegation and the saved records come from the same
+	// check, as detectNSDisappearances needs.
+	if nxdomain {
+		w.state.DeleteHostnameState(domain)
+	} else if !w.checkHostname(ctx, domain) {
+		return
+	}
+
 	if hasPrev && !w.firstRun {
 		w.detectNSChanges(ctx, domain, prev.Nameservers, nameservers)
 		w.detectNSAddressChanges(ctx, domain, prevAddresses, addresses)
@@ -333,19 +354,6 @@ func (w *Watcher) checkDomain(
 		NXDomain:            nxdomain,
 		LastChecked:         now,
 	})
-
-	// A domain that does not exist has no records of its own: none are
-	// asked for, and those saved by an earlier check are removed.
-	if nxdomain {
-		w.state.DeleteHostnameState(domain)
-
-		return
-	}
-
-	// The apex domain's records are also checked and saved as a
-	// hostname's, so that the port and TLS checks find its addresses.
-	// Notifications about them name it as a domain (see nameLine).
-	w.checkHostname(ctx, domain)
 }
 
 func (w *Watcher) detectNSChanges(
@@ -456,10 +464,12 @@ func (w *Watcher) detectNSAddressChanges(
 	}
 }
 
+// checkHostname checks hostname's records and reports whether it saved
+// them; it does not when their lookup fails.
 func (w *Watcher) checkHostname(
 	ctx context.Context,
 	hostname string,
-) {
+) bool {
 	results, err := w.resolver.LookupAllRecords(ctx, hostname)
 	if err != nil {
 		w.logFailedLookup(
@@ -469,7 +479,7 @@ func (w *Watcher) checkHostname(
 			"error", err,
 		)
 
-		return
+		return false
 	}
 
 	prev, _ := w.state.GetHostnameState(hostname)
@@ -477,6 +487,8 @@ func (w *Watcher) checkHostname(
 	w.updateHostnameState(
 		ctx, hostname, buildHostnameState(results, prev, time.Now().UTC()),
 	)
+
+	return true
 }
 
 // updateHostnameState finishes a check of hostname from newState, built
@@ -772,28 +784,53 @@ func (w *Watcher) detectRecordChanges(
 	}
 }
 
+// detectNSDisappearances sends one NS Change listing the nameservers of
+// the previous check that are no longer those of the zone hostname is
+// in. For a configured apex domain it leaves out those of the domain's
+// saved delegation, which detectNSChanges notifies when they are removed
+// from it. checkDomain saves a new delegation only after this runs, and
+// only together with the records, so the saved delegation and the
+// records in prev come from the same check.
 func (w *Watcher) detectNSDisappearances(
 	ctx context.Context,
 	hostname string,
 	prev, current *state.HostnameState,
 ) {
-	for ns, prevNS := range prev.RecordsByNameserver {
+	var delegation []string
-		if _, ok := current.RecordsByNameserver[ns]; ok || prevNS.Status != statusOK {
+
-			continue
+	if w.isDomain(hostname) {
+		if domainState, ok := w.state.GetDomainState(hostname); ok {
+			delegation = domainState.Nameservers
 		}
-
-		msg := fmt.Sprintf(
-			"%s\nNameserver: %s disappeared",
-			w.nameLine(hostname), ns,
-		)
-
-		w.notify.SendNotification(
-			ctx,
-			"NS Failure: "+hostname,
-			msg,
-			"error",
-		)
 	}
+
+	var removed []string
+
+	for ns := range prev.RecordsByNameserver {
+		_, ok := current.RecordsByNameserver[ns]
+		if !ok && !slices.Contains(delegation, ns) {
+			removed = append(removed, ns)
+		}
+	}
+
+	if len(removed) == 0 {
+		return
+	}
+
+	slices.Sort(removed)
+
+	msg := fmt.Sprintf(
+		"%s\nRemoved: %s",
+		w.nameLine(hostname),
+		strings.Join(removed, ", "),
+	)
+
+	w.notify.SendNotification(
+		ctx,
+		"NS Change: "+hostname,
+		msg,
+		"warning",
+	)
 }
 
 // detectNSFailures notifies when a nameserver that answered on the
@@ -943,7 +980,8 @@ func (w *Watcher) checkAllPorts(ctx context.Context) {
 
 	// Phase 3: Remove port state entries that no longer have
 	// any hostname referencing them, and certificate entries for
-	// an address their name no longer has.
+	// an address whose port 443 is closed or that their name no
+	// longer has.
 	w.cleanupStalePorts(associations)
 	w.cleanupStaleCertificates()
 }
@@ -964,7 +1002,7 @@ func (w *Watcher) buildPortAssociations() map[string][]string {
 		ips := w.collectIPs(name)
 		for _, ip := range ips {
 			for _, port := range monitoredPorts {
-				key := fmt.Sprintf("%s:%d", ip, port)
+				key := net.JoinHostPort(ip, strconv.Itoa(port))
 				if assoc[key] == nil {
 					assoc[key] = make(map[string]bool)
 				}
@@ -989,18 +1027,15 @@ func (w *Watcher) buildPortAssociations() map[string][]string {
 	return result
 }
 
-// parsePortKey splits an "ip:port" key into its components.
+// parsePortKey splits an "ip:port" key, written by net.JoinHostPort,
+// into its components.
 func parsePortKey(key string) (string, int) {
-	lastColon := strings.LastIndex(key, ":")
+	ip, port, err := net.SplitHostPort(key)
-	if lastColon < 0 {
+	if err != nil {
 		return key, 0
 	}
 
-	ip := key[:lastColon]
+	p, err := strconv.Atoi(port)
-
-	var p int
-
-	_, err := fmt.Sscanf(key[lastColon+1:], "%d", &p)
 	if err != nil {
 		return ip, 0
 	}
@@ -1030,13 +1065,21 @@ func (w *Watcher) cleanupStalePorts(
 }
 
 // cleanupStaleCertificates removes the certificate entries for an
-// address their name no longer resolves to. An entry saved for a name
+// address whose port 443 was found closed, and for an address their
-// none of whose nameservers answered is kept: that name's addresses are
+// name no longer resolves to. An entry saved for a name none of whose
-// not known, not gone.
+// nameservers answered is kept unless its port is closed: that name's
+// addresses are not known, not gone.
 func (w *Watcher) cleanupStaleCertificates() {
 	for _, key := range w.state.GetAllCertificateKeys() {
 		ip, hostname := parseCertKey(key)
 
+		ps, ok := w.state.GetPortState(net.JoinHostPort(ip, strconv.Itoa(tlsPort)))
+		if ok && !ps.Open {
+			w.state.DeleteCertificateState(key)
+
+			continue
+		}
+
 		if slices.Contains(w.collectIPs(hostname), ip) ||
 			w.noNameserverAnswered(hostname) {
 			continue
@@ -1145,7 +1188,7 @@ func (w *Watcher) checkSinglePort(
 		return
 	}
 
-	key := fmt.Sprintf("%s:%d", ip, port)
+	key := net.JoinHostPort(ip, strconv.Itoa(port))
 	now := time.Now().UTC()
 	prev, hasPrev := w.state.GetPortState(key)
 
@@ -1207,7 +1250,7 @@ func (w *Watcher) checkTLSForHostname(
 	ips := w.collectIPs(hostname)
 
 	for _, ip := range ips {
-		portKey := fmt.Sprintf("%s:%d", ip, tlsPort)
+		portKey := net.JoinHostPort(ip, strconv.Itoa(tlsPort))
 
 		ps, ok := w.state.GetPortState(portKey)
 		if !ok || !ps.Open {
@@ -1231,7 +1274,7 @@ func (w *Watcher) checkTLSCert(
 		return
 	}
 
-	certKey := fmt.Sprintf("%s:%d:%s", ip, tlsPort, hostname)
+	certKey := net.JoinHostPort(ip, strconv.Itoa(tlsPort)) + ":" + hostname
 	now := time.Now().UTC()
 	prev, hasPrev := w.state.GetCertificateState(certKey)
 

internal/watcher/watcher_test.go

@@ -4,6 +4,7 @@ import (
 	"context"
 	"fmt"
 	"log/slog"
+	"net"
 	"os"
 	"slices"
 	"strings"
@@ -139,6 +140,22 @@ func (m *mockNotifier) getNotifications() []notification {
 	return result
 }
 
+// cancelOnNotify is a mockNotifier that calls cancel at each
+// notification, as if shutdown cut the check short there.
+type cancelOnNotify struct {
+	*mockNotifier
+
+	cancel context.CancelFunc
+}
+
+func (n cancelOnNotify) SendNotification(
+	ctx context.Context,
+	title, message, priority string,
+) {
+	n.mockNotifier.SendNotification(ctx, title, message, priority)
+	n.cancel()
+}
+
 // --- Helpers to build a Watcher and run its checks against live DNS ---
 
 type testDeps struct {
@@ -461,6 +478,54 @@ func TestDomainPortAndTLSChecks(t *testing.T) {
 	}
 }
 
+// TestFirstCheckAfterLoadingFileWithoutSections loads a state file
+// holding {}, and one that leaves out the certificates section, and runs
+// the first check. It saves domain, hostname, port and certificate
+// entries; a section loaded as nil made it panic.
+func TestFirstCheckAfterLoadingFileWithoutSections(t *testing.T) {
+	t.Parallel()
+
+	tests := []struct {
+		name string
+		file string
+	}{
+		{"no sections", `{}`},
+		{"no certificates", `{"domains": {}, "hostnames": {}, "ports": {}}`},
+	}
+
+	for _, tt := range tests {
+		t.Run(tt.name, func(t *testing.T) {
+			t.Parallel()
+
+			cfg := defaultTestConfig(t)
+			cfg.Domains = []string{testSmallDomain}
+
+			_, deps := runChecks(t, cfg, func(deps *testDeps) {
+				err := os.WriteFile(cfg.StatePath(), []byte(tt.file), 0o600)
+				if err != nil {
+					t.Fatalf("writing the state file: %v", err)
+				}
+
+				err = deps.state.Load()
+				if err != nil {
+					t.Fatalf("loading the state file: %v", err)
+				}
+			})
+
+			snap := deps.state.GetSnapshot()
+			if len(snap.Domains) == 0 || len(snap.Hostnames) == 0 ||
+				len(snap.Ports) == 0 || len(snap.Certificates) == 0 {
+				t.Errorf(
+					"saved %d domain, %d hostname, %d port and %d "+
+						"certificate entries, want at least one of each",
+					len(snap.Domains), len(snap.Hostnames),
+					len(snap.Ports), len(snap.Certificates),
+				)
+			}
+		})
+	}
+}
+
 func TestNSChangeDetection(t *testing.T) {
 	t.Parallel()
 
@@ -558,6 +623,11 @@ func TestDomainThatDoesNotExist(t *testing.T) {
 // nameservers and without nxdomain, and its records, asked at the
 // codeberg.page servers, are saved. Those are testSmallDomain's two
 // nameservers; github.io, the zone of the README's example, has eight.
+// The previous check saved a delegation to oldNS1, now withdrawn, and
+// records asked at oldNS1. A first check is cut short at its first
+// notification, as shutdown would, and a second runs in full: across
+// them the NS Change of its delegation removes oldNS1, and no other NS
+// Change lists it again.
 func TestDomainWithNoDelegationOfItsOwn(t *testing.T) {
 	t.Parallel()
 
@@ -569,9 +639,30 @@ func TestDomainWithNoDelegationOfItsOwn(t *testing.T) {
 	var deps *testDeps
 
 	livednstest.Retry(t, "watcher checks", func(ctx context.Context) error {
-		var w *watcher.Watcher
+		deps = newTestDeps(t, cfg)
 
-		w, deps = newTestWatcher(t, cfg)
+		firstCtx, cancel := context.WithCancel(ctx)
+		defer cancel()
+
+		w := watcher.NewForTest(
+			cfg,
+			deps.state,
+			resolver.NewFromLogger(slog.Default()),
+			deps.portChecker,
+			deps.tlsChecker,
+			cancelOnNotify{mockNotifier: deps.notifier, cancel: cancel},
+		)
+
+		deps.state.SetDomainState(domain, &state.DomainState{
+			Nameservers: []string{oldNS1},
+		})
+		deps.state.SetHostnameState(domain, saved(
+			map[string]*state.NameserverRecordState{
+				oldNS1: answered(map[string][]string{"A": {oldIP}}),
+			},
+		))
+
+		w.RunOnce(firstCtx)
 
 		err := checkOnce(ctx, w, deps)
 
@@ -593,6 +684,22 @@ func TestDomainWithNoDelegationOfItsOwn(t *testing.T) {
 	if _, ok := deps.state.GetHostnameState(domain); !ok {
 		t.Errorf("no records saved for %s", domain)
 	}
+
+	title := "NS Change: " + domain
+	want := "Domain: " + domain + "\nAdded: \nRemoved: " + oldNS1
+
+	var changes []notification
+
+	for _, n := range deps.notifier.getNotifications() {
+		if n.Title == title {
+			changes = append(changes, n)
+		}
+	}
+
+	if len(changes) != 1 || changes[0].Message != want {
+		t.Errorf("sent %v, want one %q with message:\n%s",
+			changes, title, want)
+	}
 }
 
 func TestNSAddressChangeDetection(t *testing.T) {
@@ -718,7 +825,8 @@ func TestPortStateChange(t *testing.T) {
 
 	hs, _ := deps.state.GetHostnameState(testHost)
 	assertNotified(
-		t, deps, "Port Change: "+addresses(hs)[0]+":443", "warning",
+		t, deps, "Port Change: "+net.JoinHostPort(addresses(hs)[0], "443"),
+		"warning",
 	)
 }
 
@@ -925,11 +1033,12 @@ func TestDNSRunsBeforePortAndTLSChecks(t *testing.T) {
 
 	// Port and TLS checks must use the addresses this check found.
 	for _, ip := range addresses(snap.Hostnames[testHost]) {
-		if _, ok := snap.Ports[ip+":80"]; !ok {
+		portKey := net.JoinHostPort(ip, "80")
-			t.Error("port check used stale DNS: missing " + ip + ":80")
+		if _, ok := snap.Ports[portKey]; !ok {
+			t.Error("port check used stale DNS: missing " + portKey)
 		}
 
-		certKey := ip + ":443:" + testHost
+		certKey := net.JoinHostPort(ip, "443") + ":" + testHost
 		if _, ok := snap.Certificates[certKey]; !ok {
 			t.Error("TLS check used stale DNS: missing " + certKey)
 		}
@@ -1049,7 +1158,7 @@ func TestSendTestNotification_Disabled(t *testing.T) {
 	}
 }
 
-func TestNSFailureAndRecovery(t *testing.T) {
+func TestNSChangeAndRecovery(t *testing.T) {
 	t.Parallel()
 
 	cfg := defaultTestConfig(t)
@@ -1059,7 +1168,7 @@ func TestNSFailureAndRecovery(t *testing.T) {
 
 	// The saved state has every nameserver live DNS lists as one that
 	// did not answer, and, as answering, one that live DNS does not
-	// list, which then disappears.
+	// list, which the check then finds removed.
 	_, deps := runChecks(t, cfg, func(deps *testDeps) {
 		byNameserver := map[string]*state.NameserverRecordState{
 			oldNS1: answered(map[string][]string{"A": {oldIP}}),
@@ -1071,7 +1180,7 @@ func TestNSFailureAndRecovery(t *testing.T) {
 		deps.state.SetHostnameState(testHost, saved(byNameserver))
 	})
 
-	assertNotified(t, deps, "NS Failure: "+testHost, "error")
+	assertNotified(t, deps, "NS Change: "+testHost, "warning")
 	assertNotified(t, deps, "NS Recovery: "+testHost, "success")
 
 	// A nameserver that did not answer has no records to compare, so