config: stop startup on an invalid DNS or TLS interval (closes #177)

DNSWATCHER_DNS_INTERVAL and DNSWATCHER_TLS_INTERVAL were parsed with
time.ParseDuration and silently replaced by the default when that failed,
so a value like 5 or 1d gave hourly checks with no hint why, and zero or
negative values were accepted. Both now go through parseInterval, which
returns an error naming the variable and the value, and startup stops the
same way it does for invalid targets. An unset or empty variable still gets
its default from setupViper. The three tests that pinned the old fallback
are replaced. The README says what a valid value looks like.

Model: opus-5-5

README.md

@@ -320,8 +320,8 @@ the following precedence (highest to lowest):
 | `DNSWATCHER_SLACK_WEBHOOK`      | Slack incoming webhook URL                 | `""`        |
 | `DNSWATCHER_MATTERMOST_WEBHOOK` | Mattermost incoming webhook URL            | `""`        |
 | `DNSWATCHER_NTFY_TOPIC`         | ntfy topic URL                             | `""`        |
-| `DNSWATCHER_DNS_INTERVAL`       | DNS check interval                         | `1h`        |
-| `DNSWATCHER_TLS_INTERVAL`       | TLS check interval                         | `12h`       |
+| `DNSWATCHER_DNS_INTERVAL`       | DNS check interval, a positive duration such as `30m`; empty means the default, anything else stops startup | `1h` |
+| `DNSWATCHER_TLS_INTERVAL`       | TLS check interval, a positive duration such as `6h`; empty means the default, anything else stops startup | `12h` |
 | `DNSWATCHER_TLS_EXPIRY_WARNING` | Days before expiry to warn                 | `7`         |
 | `DNSWATCHER_SENTRY_DSN`         | Sentry DSN for error reporting             | `""`        |
 | `DNSWATCHER_MAINTENANCE_MODE`   | Enable maintenance mode                    | `false`     |
@@ -335,6 +335,14 @@ is a misconfiguration, so dnswatcher fails fast with a clear error message
 rather than running silently. Set `DNSWATCHER_TARGETS` to a comma-separated
 list of DNS names before starting.
 
+**`DNSWATCHER_DNS_INTERVAL` and `DNSWATCHER_TLS_INTERVAL`** take a positive
+duration: a number followed by a unit such as `s`, `m` or `h`, for example
+`90s`, `30m`, `1h` or `1h30m`. There is no unit for days; write `24h`. An
+unset or empty variable (`DNSWATCHER_DNS_INTERVAL=`) means the default. If
+either is set to anything else, including a bare number or a zero or negative
+duration, dnswatcher refuses to start with an error naming the variable and
+the value.
+
 ### Example `.env`
 
 ```sh

TODO.md

@@ -20,6 +20,8 @@ https://git.eeqj.de/sneak/dnswatcher/issues/104
 
 # Completed Steps
 
+- 2026-10-01: a `DNSWATCHER_DNS_INTERVAL` or `DNSWATCHER_TLS_INTERVAL` that is
+  not a positive duration stops startup instead of being ignored (closes #177).
 - 2026-10-01: `TODO.md` brought up to date: open issues listed by URL, every
   Completed Steps entry cut to at most two lines (closes #146).
 - 2026-10-01: wildcard CORS now applies only to the public routes, not to
@@ -89,8 +91,6 @@ https://git.eeqj.de/sneak/dnswatcher/issues/104
 - nameserver IP address changes: https://git.eeqj.de/sneak/dnswatcher/issues/105
 - `DNSWATCHER_SENTRY_DSN` does nothing:
   https://git.eeqj.de/sneak/dnswatcher/issues/107
-- invalid DNS or TLS interval silently replaced by the default:
-  https://git.eeqj.de/sneak/dnswatcher/issues/177
 - rate limit on `/metrics` Basic Auth:
   https://git.eeqj.de/sneak/dnswatcher/issues/101
 - images report version `dev`: https://git.eeqj.de/sneak/dnswatcher/issues/109

internal/config/config.go

@@ -28,6 +28,12 @@ var ErrNoTargets = errors.New(
 	"no monitoring targets configured: set DNSWATCHER_TARGETS environment variable",
 )
 
+// ErrInvalidInterval is returned when DNSWATCHER_DNS_INTERVAL or
+// DNSWATCHER_TLS_INTERVAL is set to something other than a positive duration.
+var ErrInvalidInterval = errors.New(
+	"interval must be a positive duration such as 30m or 1h",
+)
+
 // Params contains dependencies for Config.
 type Params struct {
 	fx.In
@@ -125,18 +131,14 @@ func buildConfig(
 		}
 	}
 
-	dnsInterval, err := time.ParseDuration(
-		viper.GetString("DNS_INTERVAL"),
-	)
+	dnsInterval, err := parseInterval("DNS_INTERVAL")
 	if err != nil {
-		dnsInterval = defaultDNSInterval
+		return nil, err
 	}
 
-	tlsInterval, err := time.ParseDuration(
-		viper.GetString("TLS_INTERVAL"),
-	)
+	tlsInterval, err := parseInterval("TLS_INTERVAL")
 	if err != nil {
-		tlsInterval = defaultTLSInterval
+		return nil, err
 	}
 
 	domains, hostnames, err := parseAndValidateTargets()
@@ -168,6 +170,22 @@ func buildConfig(
 	return cfg, nil
 }
 
+// parseInterval reads the DNSWATCHER_-prefixed setting key as a duration. A
+// value that does not parse, or is zero or negative, is an error naming the
+// variable and the value; an unset variable has its default from setupViper.
+func parseInterval(key string) (time.Duration, error) {
+	value := viper.GetString(key)
+
+	interval, err := time.ParseDuration(value)
+	if err != nil || interval <= 0 {
+		return 0, fmt.Errorf(
+			"invalid DNSWATCHER_%s %q: %w", key, value, ErrInvalidInterval,
+		)
+	}
+
+	return interval, nil
+}
+
 func parseAndValidateTargets() ([]string, []string, error) {
 	domains, hostnames, err := ClassifyTargets(
 		parseCSV(viper.GetString("TARGETS")),

internal/config/config_test.go

@@ -1,6 +1,7 @@
 package config_test
 
 import (
+	"strconv"
 	"testing"
 	"time"
 
@@ -113,33 +114,40 @@ func TestNew_OnlyEmptyCSVSegments(t *testing.T) {
 	assert.ErrorIs(t, err, config.ErrNoTargets)
 }
 
-func TestNew_InvalidDNSInterval_FallsBackToDefault(t *testing.T) {
-	viper.Reset()
-	t.Setenv("DNSWATCHER_TARGETS", "example.com")
-	t.Setenv("DNSWATCHER_DNS_INTERVAL", "banana")
-
-	cfg, err := config.New(nil, newTestParams(t))
-	require.NoError(t, err)
-	assert.Equal(t, time.Hour, cfg.DNSInterval,
-		"invalid DNS interval should fall back to 1h default")
+// TestNew_InvalidIntervalStopsStartup checks values that must stop startup;
+// TestNew_DefaultValues and TestNew_EmptyIntervalMeansDefault check that an
+// unset or empty interval means the default.
+func TestNew_InvalidIntervalStopsStartup(t *testing.T) {
+	variables := []string{"DNSWATCHER_DNS_INTERVAL", "DNSWATCHER_TLS_INTERVAL"}
+	values := []string{
+		"banana", // not a duration
+		"5",      // no unit
+		"1d",     // days are not a unit time.ParseDuration knows
+		"0",      // zero
+		"-1h",    // negative
 	}
 
-func TestNew_InvalidTLSInterval_FallsBackToDefault(t *testing.T) {
+	for _, variable := range variables {
+		for _, value := range values {
+			t.Run(variable+"="+value, func(t *testing.T) {
 				viper.Reset()
 				t.Setenv("DNSWATCHER_TARGETS", "example.com")
-	t.Setenv("DNSWATCHER_TLS_INTERVAL", "notaduration")
+				t.Setenv(variable, value)
 
-	cfg, err := config.New(nil, newTestParams(t))
-	require.NoError(t, err)
-	assert.Equal(t, 12*time.Hour, cfg.TLSInterval,
-		"invalid TLS interval should fall back to 12h default")
+				_, err := config.New(nil, newTestParams(t))
+				require.ErrorIs(t, err, config.ErrInvalidInterval)
+				require.ErrorContains(t, err, variable)
+				require.ErrorContains(t, err, strconv.Quote(value))
+			})
+		}
+	}
 }
 
-func TestNew_BothIntervalsInvalid(t *testing.T) {
+func TestNew_EmptyIntervalMeansDefault(t *testing.T) {
 	viper.Reset()
 	t.Setenv("DNSWATCHER_TARGETS", "example.com")
-	t.Setenv("DNSWATCHER_DNS_INTERVAL", "xyz")
-	t.Setenv("DNSWATCHER_TLS_INTERVAL", "abc")
+	t.Setenv("DNSWATCHER_DNS_INTERVAL", "")
+	t.Setenv("DNSWATCHER_TLS_INTERVAL", "")
 
 	cfg, err := config.New(nil, newTestParams(t))
 	require.NoError(t, err)