watcher: a removed nameserver is an NS Change, not an NS Failure (closes #262)

A nameserver that left a domain's delegation was reported twice: as the
domain's NS Change, and by the check of the domain's own records as an
error-level NS Failure saying it disappeared. That check now sends
nothing for a domain. For a hostname, the nameservers that leave its
zone are sent as one NS Change at warning level, with a Hostname: line
and a Removed: line, as decided on the issue; nothing is sent for one
that joins. The README says what each case gets.

A nameserver that was failing before it left is now listed too; the
NS Failure skipped it.
A domain with no delegation of its own gets nothing when a nameserver
leaves the zone it is in.

Model: opus-5-5

README.md

@@ -103,12 +103,10 @@ notification endpoint set, changes show only on the dashboard; see
   NS change notification above. A domain listed in
   `DNSWATCHER_SKIP_RECORD_NOTIFICATIONS` gets no record change or inconsistency
   notification. A domain with no delegation of its own has these records asked
-  at the servers of the zone it is in, as a hostname has. A nameserver the
+  at the servers of the zone it is in, as a hostname has, and nothing is sent
-  domain's records were asked at on the previous check but not on this one gets
+  when a nameserver leaves that zone. A domain that does not exist has none:
-  a hostname's NS change notification (see below), unless it was in the domain's
+  they are not asked for, and those saved by an earlier check are removed
-  delegation on the previous check, as when that delegation is withdrawn. A
+  without a notification.
-  domain that does not exist has none: they are not asked for, and those saved
-  by an earlier check are removed without a notification.
 
 ### DNS Hostname Monitoring (Subdomains)
 
@@ -247,8 +245,7 @@ includes:
 - **DNS record changes**: Which hostname or domain, which nameserver, what
   record type, old values, new values.
 - **DNS NS changes**: Which domain, which nameservers were added to or removed
-  from its delegation. For a hostname, or a domain with no delegation of its
+  from its delegation. For a hostname, which nameservers left the zone it is in.
-  own, which nameservers left the zone it is in.
 - **NS address changes**: Which domain, which nameserver, its old and new
   addresses.
 - **CNAME address changes**: Which hostname or domain, the old and new addresses
@@ -474,16 +471,6 @@ or empty variable (`DNSWATCHER_DNS_INTERVAL=`) means the default. If either is
 set to anything else, including a bare number or a zero or negative duration,
 dnswatcher refuses to start with an error naming the variable and the value.
 
-**`PORT` and `DNSWATCHER_TLS_EXPIRY_WARNING`** take a whole number: 1 to 65535
-for `PORT`, and a number of days, 1 or more, for
-`DNSWATCHER_TLS_EXPIRY_WARNING`. `DNSWATCHER_DEBUG`,
-`DNSWATCHER_MAINTENANCE_MODE` and `DNSWATCHER_SEND_TEST_NOTIFICATION` take
-`true` or `false`; `1`, `t`, `T`, `TRUE` and `True` also mean true, and `0`,
-`f`, `F`, `FALSE` and `False` also mean false. An unset or empty variable means
-the default. Any other value, such as `PORT=http`,
-`DNSWATCHER_TLS_EXPIRY_WARNING=7d` or `DNSWATCHER_DEBUG=yes`, makes dnswatcher
-refuse to start with an error naming the variable and the value.
-
 **`DNSWATCHER_SENTRY_DSN` reports crashes in HTTP requests to Sentry.** When it
 is set, a panic in an HTTP request handler is sent to Sentry, and the request
 still gets a `500 Internal Server Error` answer. Nothing else is sent to Sentry:

TODO.md

@@ -21,10 +21,6 @@ trial run of the finished image: https://git.eeqj.de/sneak/dnswatcher/issues/149
 
 - 2026-10-13: a nameserver leaving a domain's delegation sends only NS Change;
   one leaving a hostname's zone sends NS Change, not NS Failure (closes #262).
-- 2026-10-13: a bad `PORT`, `DNSWATCHER_TLS_EXPIRY_WARNING` or true/false
-  setting stops startup instead of being read as 0 or false (closes #269).
-- 2026-10-13: a check saving the state while the dashboard or `/api/v1/status`
-  is read cannot crash the process (closes #261).
 - 2026-10-06: canonical files re-fetched from `sneak/prompts` at `dd4027b`; lint
   and test are phases of the `Dockerfile`, every scripted build uncached (closes
   #257).

internal/config/config.go

@@ -6,7 +6,6 @@ import (
 	"fmt"
 	"log/slog"
 	"slices"
-	"strconv"
 	"strings"
 	"time"
 
@@ -25,9 +24,6 @@ const (
 	defaultTLSExpiryWarning = 7
 )
 
-// maxPort is the highest TCP port number.
-const maxPort = 65535
-
 // ErrNoTargets is returned when no monitoring targets are configured.
 var ErrNoTargets = errors.New(
 	"no monitoring targets configured: set DNSWATCHER_TARGETS environment variable",
@@ -44,23 +40,6 @@ var ErrInvalidInterval = errors.New(
 // lists a name that is not in DNSWATCHER_TARGETS.
 var ErrNotInTargets = errors.New("name is not in DNSWATCHER_TARGETS")
 
-// ErrInvalidPort is returned when PORT is set but is not a whole number
-// from 1 to 65535. An empty value counts as unset and means the default.
-var ErrInvalidPort = errors.New("port must be a whole number from 1 to 65535")
-
-// ErrInvalidTLSExpiryWarning is returned when DNSWATCHER_TLS_EXPIRY_WARNING
-// is set but is not a whole number, 1 or more. An empty value counts as unset
-// and means the default.
-var ErrInvalidTLSExpiryWarning = errors.New(
-	"TLS expiry warning must be a whole number of days, 1 or more",
-)
-
-// ErrInvalidBool is returned when DNSWATCHER_DEBUG,
-// DNSWATCHER_MAINTENANCE_MODE or DNSWATCHER_SEND_TEST_NOTIFICATION is set
-// but is not a value strconv.ParseBool accepts. An empty value counts as
-// unset and means the default.
-var ErrInvalidBool = errors.New("value must be true or false")
-
 // Params contains dependencies for Config.
 type Params struct {
 	fx.In
@@ -148,9 +127,16 @@ func buildConfig(
 	log *slog.Logger,
 	params *Params,
 ) (*Config, error) {
-	err := readConfigFile(log)
+	err := viper.ReadInConfig()
 	if err != nil {
-		return nil, err
+		var notFound viper.ConfigFileNotFoundError
+		if !errors.As(err, &notFound) {
+			log.Error("config file malformed", "error", err)
+
+			return nil, fmt.Errorf(
+				"config file malformed: %w", err,
+			)
+		}
 	}
 
 	dnsInterval, err := parseInterval("DNS_INTERVAL")
@@ -175,34 +161,9 @@ func buildConfig(
 		return nil, err
 	}
 
-	port, err := parsePort()
-	if err != nil {
-		return nil, err
-	}
-
-	tlsExpiryWarning, err := parseTLSExpiryWarning()
-	if err != nil {
-		return nil, err
-	}
-
-	debug, err := parseBool("DEBUG")
-	if err != nil {
-		return nil, err
-	}
-
-	maintenanceMode, err := parseBool("MAINTENANCE_MODE")
-	if err != nil {
-		return nil, err
-	}
-
-	sendTestNotification, err := parseBool("SEND_TEST_NOTIFICATION")
-	if err != nil {
-		return nil, err
-	}
-
 	cfg := &Config{
-		Port:                    port,
+		Port:                    viper.GetInt("PORT"),
-		Debug:                   debug,
+		Debug:                   viper.GetBool("DEBUG"),
 		DataDir:                 viper.GetString("DATA_DIR"),
 		Domains:                 domains,
 		Hostnames:               hostnames,
@@ -212,12 +173,12 @@ func buildConfig(
 		NtfyTopic:               viper.GetString("NTFY_TOPIC"),
 		DNSInterval:             dnsInterval,
 		TLSInterval:             tlsInterval,
-		TLSExpiryWarning:        tlsExpiryWarning,
+		TLSExpiryWarning:        viper.GetInt("TLS_EXPIRY_WARNING"),
 		SentryDSN:               viper.GetString("SENTRY_DSN"),
-		MaintenanceMode:         maintenanceMode,
+		MaintenanceMode:         viper.GetBool("MAINTENANCE_MODE"),
 		MetricsUsername:         viper.GetString("METRICS_USERNAME"),
 		MetricsPassword:         viper.GetString("METRICS_PASSWORD"),
-		SendTestNotification:    sendTestNotification,
+		SendTestNotification:    viper.GetBool("SEND_TEST_NOTIFICATION"),
 		params:                  params,
 		log:                     log,
 	}
@@ -225,21 +186,6 @@ func buildConfig(
 	return cfg, nil
 }
 
-// readConfigFile reads the config file, if there is one.
-func readConfigFile(log *slog.Logger) error {
-	err := viper.ReadInConfig()
-	if err != nil {
-		var notFound viper.ConfigFileNotFoundError
-		if !errors.As(err, &notFound) {
-			log.Error("config file malformed", "error", err)
-
-			return fmt.Errorf("config file malformed: %w", err)
-		}
-	}
-
-	return nil
-}
-
 // parseInterval reads the DNSWATCHER_-prefixed setting key as a duration. A
 // value that does not parse, or is zero or negative, is an error naming the
 // variable and the value; an unset variable has its default from setupViper.
@@ -256,53 +202,6 @@ func parseInterval(key string) (time.Duration, error) {
 	return interval, nil
 }
 
-// parsePort reads PORT, which has no DNSWATCHER_ prefix, as a port number. A
-// value that is not a whole number from 1 to 65535 is an error naming the
-// variable and the value; an unset variable has its default from setupViper.
-func parsePort() (int, error) {
-	value := viper.GetString("PORT")
-
-	port, err := strconv.Atoi(value)
-	if err != nil || port < 1 || port > maxPort {
-		return 0, fmt.Errorf("invalid PORT %q: %w", value, ErrInvalidPort)
-	}
-
-	return port, nil
-}
-
-// parseTLSExpiryWarning reads DNSWATCHER_TLS_EXPIRY_WARNING as a number of
-// days. A value that is not a whole number, 1 or more, is an error naming the
-// variable and the value; an unset variable has its default from setupViper.
-func parseTLSExpiryWarning() (int, error) {
-	value := viper.GetString("TLS_EXPIRY_WARNING")
-
-	days, err := strconv.Atoi(value)
-	if err != nil || days < 1 {
-		return 0, fmt.Errorf(
-			"invalid DNSWATCHER_TLS_EXPIRY_WARNING %q: %w",
-			value, ErrInvalidTLSExpiryWarning,
-		)
-	}
-
-	return days, nil
-}
-
-// parseBool reads the DNSWATCHER_-prefixed setting key as true or false. A
-// value strconv.ParseBool does not accept is an error naming the variable and
-// the value; an unset variable has its default from setupViper.
-func parseBool(key string) (bool, error) {
-	value := viper.GetString(key)
-
-	result, err := strconv.ParseBool(value)
-	if err != nil {
-		return false, fmt.Errorf(
-			"invalid DNSWATCHER_%s %q: %w", key, value, ErrInvalidBool,
-		)
-	}
-
-	return result, nil
-}
-
 func parseAndValidateTargets() ([]string, []string, error) {
 	domains, hostnames, err := ClassifyTargets(
 		parseCSV(viper.GetString("TARGETS")),

internal/config/config_test.go

@@ -116,7 +116,7 @@ func TestNew_OnlyEmptyCSVSegments(t *testing.T) {
 }
 
 // TestNew_InvalidIntervalStopsStartup checks values that must stop startup;
-// TestNew_DefaultValues and TestNew_EmptyValueMeansDefault check that an
+// TestNew_DefaultValues and TestNew_EmptyIntervalMeansDefault check that an
 // unset or empty interval means the default.
 func TestNew_InvalidIntervalStopsStartup(t *testing.T) {
 	variables := []string{"DNSWATCHER_DNS_INTERVAL", "DNSWATCHER_TLS_INTERVAL"}
@@ -144,107 +144,16 @@ func TestNew_InvalidIntervalStopsStartup(t *testing.T) {
 	}
 }
 
-func TestNew_EmptyValueMeansDefault(t *testing.T) {
+func TestNew_EmptyIntervalMeansDefault(t *testing.T) {
 	viper.Reset()
 	t.Setenv("DNSWATCHER_TARGETS", "example.com")
 	t.Setenv("DNSWATCHER_DNS_INTERVAL", "")
 	t.Setenv("DNSWATCHER_TLS_INTERVAL", "")
-	t.Setenv("PORT", "")
-	t.Setenv("DNSWATCHER_TLS_EXPIRY_WARNING", "")
-	t.Setenv("DNSWATCHER_DEBUG", "")
-	t.Setenv("DNSWATCHER_MAINTENANCE_MODE", "")
-	t.Setenv("DNSWATCHER_SEND_TEST_NOTIFICATION", "")
 
 	cfg, err := config.New(nil, newTestParams(t))
 	require.NoError(t, err)
 	assert.Equal(t, time.Hour, cfg.DNSInterval)
 	assert.Equal(t, 12*time.Hour, cfg.TLSInterval)
-	assert.Equal(t, 8080, cfg.Port)
-	assert.Equal(t, 7, cfg.TLSExpiryWarning)
-	assert.False(t, cfg.Debug)
-	assert.False(t, cfg.MaintenanceMode)
-	assert.False(t, cfg.SendTestNotification)
-}
-
-// TestNew_InvalidNumberOrBoolStopsStartup checks values that must stop
-// startup; TestNew_EnvironmentOverrides, the two tests after this one and
-// TestNew_EmptyValueMeansDefault check values that must not.
-func TestNew_InvalidNumberOrBoolStopsStartup(t *testing.T) {
-	notBools := []string{"yes", "on", "2", "tRUE"}
-	tests := []struct {
-		variable string
-		values   []string
-		want     error
-	}{
-		{
-			variable: "PORT",
-			values:   []string{"notaport", "0", "-1", "65536", "8080.5"},
-			want:     config.ErrInvalidPort,
-		},
-		{
-			variable: "DNSWATCHER_TLS_EXPIRY_WARNING",
-			values:   []string{"abc", "7d", "0", "-5"},
-			want:     config.ErrInvalidTLSExpiryWarning,
-		},
-		{
-			variable: "DNSWATCHER_DEBUG",
-			values:   notBools,
-			want:     config.ErrInvalidBool,
-		},
-		{
-			variable: "DNSWATCHER_MAINTENANCE_MODE",
-			values:   notBools,
-			want:     config.ErrInvalidBool,
-		},
-		{
-			variable: "DNSWATCHER_SEND_TEST_NOTIFICATION",
-			values:   notBools,
-			want:     config.ErrInvalidBool,
-		},
-	}
-
-	for _, tt := range tests {
-		for _, value := range tt.values {
-			t.Run(tt.variable+"="+value, func(t *testing.T) {
-				viper.Reset()
-				t.Setenv("DNSWATCHER_TARGETS", "example.com")
-				t.Setenv(tt.variable, value)
-
-				_, err := config.New(nil, newTestParams(t))
-				require.ErrorIs(t, err, tt.want)
-				require.ErrorContains(t, err, tt.variable)
-				require.ErrorContains(t, err, strconv.Quote(value))
-			})
-		}
-	}
-}
-
-func TestNew_LowestNumbersAndOtherSpellingsOfTrue(t *testing.T) {
-	viper.Reset()
-	t.Setenv("DNSWATCHER_TARGETS", "example.com")
-	t.Setenv("PORT", "1")
-	t.Setenv("DNSWATCHER_TLS_EXPIRY_WARNING", "1")
-	t.Setenv("DNSWATCHER_DEBUG", "1")
-	t.Setenv("DNSWATCHER_MAINTENANCE_MODE", "T")
-	t.Setenv("DNSWATCHER_SEND_TEST_NOTIFICATION", "True")
-
-	cfg, err := config.New(nil, newTestParams(t))
-	require.NoError(t, err)
-	assert.Equal(t, 1, cfg.Port)
-	assert.Equal(t, 1, cfg.TLSExpiryWarning)
-	assert.True(t, cfg.Debug)
-	assert.True(t, cfg.MaintenanceMode)
-	assert.True(t, cfg.SendTestNotification)
-}
-
-func TestNew_HighestPort(t *testing.T) {
-	viper.Reset()
-	t.Setenv("DNSWATCHER_TARGETS", "example.com")
-	t.Setenv("PORT", "65535")
-
-	cfg, err := config.New(nil, newTestParams(t))
-	require.NoError(t, err)
-	assert.Equal(t, 65535, cfg.Port)
 }
 
 func TestNew_DebugEnablesDebugLogging(t *testing.T) {

internal/state/state.go

@@ -6,7 +6,6 @@ import (
 	"encoding/json"
 	"fmt"
 	"log/slog"
-	"maps"
 	"os"
 	"path/filepath"
 	"slices"
@@ -271,21 +270,12 @@ func (s *State) Save() error {
 	return nil
 }
 
-// GetSnapshot returns a copy of the current snapshot, with copies of
+// GetSnapshot returns a copy of the current snapshot.
-// its maps, so that a caller can range over them while the state is
-// written. The entries in the maps are not copied: an entry saved in the
-// state must be replaced, never changed in place.
 func (s *State) GetSnapshot() Snapshot {
 	s.mu.RLock()
 	defer s.mu.RUnlock()
 
-	snap := *s.snapshot
+	return *s.snapshot
-	snap.Domains = maps.Clone(snap.Domains)
-	snap.Hostnames = maps.Clone(snap.Hostnames)
-	snap.Ports = maps.Clone(snap.Ports)
-	snap.Certificates = maps.Clone(snap.Certificates)
-
-	return snap
 }
 
 // SetDomainState updates the state for a domain.

internal/state/state_test.go

@@ -995,8 +995,7 @@ func TestPortStateUnmarshalJSON_BothFormats(t *testing.T) {
 	}
 }
 
-// TestGetSnapshot_ReturnsCopy verifies that the maps in the snapshot
+// TestGetSnapshot_ReturnsCopy verifies that GetSnapshot returns a value copy.
-// GetSnapshot returns are not the state's own.
 func TestGetSnapshot_ReturnsCopy(t *testing.T) {
 	t.Parallel()
 
@@ -1006,67 +1005,15 @@ func TestGetSnapshot_ReturnsCopy(t *testing.T) {
 
 	snap := s.GetSnapshot()
 
-	const added = "added.example.com"
+	// Mutate the returned snapshot's map.
-
+	snap.Domains["mutated.example.com"] = &state.DomainState{
-	snap.Domains[added] = &state.DomainState{}
+		Nameservers: []string{"ns1.mutated.com."},
-	snap.Hostnames[added] = &state.HostnameState{}
-	snap.Ports[added] = &state.PortState{}
-	snap.Certificates[added] = &state.CertificateState{}
-
-	if _, ok := s.GetDomainState(added); ok {
-		t.Error("the snapshot's Domains map is the state's own")
 	}
 
-	if _, ok := s.GetHostnameState(added); ok {
+	// The original domain data should still be accessible.
-		t.Error("the snapshot's Hostnames map is the state's own")
+	_, ok := s.GetDomainState("example.com")
-	}
+	if !ok {
-
+		t.Error("original domain should still exist")
-	if _, ok := s.GetPortState(added); ok {
-		t.Error("the snapshot's Ports map is the state's own")
-	}
-
-	if _, ok := s.GetCertificateState(added); ok {
-		t.Error("the snapshot's Certificates map is the state's own")
-	}
-}
-
-// TestGetSnapshot_WhileWritten ranges over snapshots while another
-// goroutine writes the state, as the dashboard does while a check runs.
-// Under -race it fails when a snapshot's maps are the state's own.
-func TestGetSnapshot_WhileWritten(t *testing.T) {
-	t.Parallel()
-
-	s := state.NewForTestWithDataDir(t.TempDir())
-
-	const writes = 1000
-
-	written := make(chan struct{})
-
-	go func() {
-		defer close(written)
-
-		for range writes {
-			s.SetDomainState("example.com", &state.DomainState{})
-			s.SetHostnameState(testHostname, &state.HostnameState{})
-			s.SetPortState(testIPv4+":443", &state.PortState{})
-			s.SetCertificateState(
-				testIPv4+":443:"+testHostname, &state.CertificateState{},
-			)
-		}
-	}()
-
-	for {
-		select {
-		case <-written:
-			return
-		default:
-		}
-
-		// json.Marshal ranges over each of the snapshot's maps.
-		_, err := json.Marshal(s.GetSnapshot())
-		if err != nil {
-			t.Fatal(err)
-		}
 	}
 }
 

internal/watcher/message_test.go

@@ -5,6 +5,7 @@ import (
 	"strings"
 	"testing"
 
+	"sneak.berlin/go/dnswatcher/internal/config"
 	"sneak.berlin/go/dnswatcher/internal/state"
 	"sneak.berlin/go/dnswatcher/internal/watcher"
 )
@@ -73,11 +74,11 @@ b.ns.example.net.: 192.0.2.2`,
 func TestDomainRecordNotificationsNameTheDomain(t *testing.T) {
 	t.Parallel()
 
-	cfg := defaultTestConfig(t)
+	notifier := &mockNotifier{}
-	cfg.Domains = []string{domain}
+	w := watcher.NewForTest(
-
+		&config.Config{Domains: []string{domain}},
-	deps := newTestDeps(t, cfg)
+		nil, nil, nil, nil, notifier,
-	w := watcher.NewForTest(cfg, deps.state, nil, nil, nil, deps.notifier)
+	)
 
 	// nsA's address changes, which also makes it differ from nsC; nsB
 	// fails; nsC answers again.
@@ -109,7 +110,7 @@ func TestDomainRecordNotificationsNameTheDomain(t *testing.T) {
 
 	sent := make(map[string]int)
 
-	for _, n := range deps.notifier.getNotifications() {
+	for _, n := range notifier.getNotifications() {
 		kind, _, _ := strings.Cut(n.Title, ":")
 		sent[kind]++
 
@@ -125,85 +126,37 @@ func TestDomainRecordNotificationsNameTheDomain(t *testing.T) {
 }
 
 // nsB, which answered, and nsC, which did not, are no longer among the
-// nameservers. One NS Change lists both, for the hostname and for the
+// nameservers. For the hostname one NS Change lists both; for the
-// configured apex domain with no delegation of its own. Nothing is sent
+// configured apex domain nothing is sent, because the check of its
-// for the domain whose delegation on the previous check listed them:
+// delegation sends its NS Change.
-// the check of its delegation sends its NS Change.
 func TestRemovedNameserversAreAnNSChange(t *testing.T) {
 	t.Parallel()
 
-	tests := []struct {
+	notifier := &mockNotifier{}
-		name   string
+	w := watcher.NewForTest(
-		target string
+		&config.Config{Domains: []string{domain}},
-		// The domain's nameservers saved by the previous check.
+		nil, nil, nil, nil, notifier,
-		delegation []string
+	)
-		// The NS Change sent, or "" for none.
-		want string
-	}{
-		{
-			name:   "hostname",
-			target: host,
-			want: `Hostname: www.example.net
-Removed: b.ns.example.net., c.ns.example.net.`,
-		},
-		{
-			name:       "domain with no delegation of its own",
-			target:     domain,
-			delegation: []string{},
-			want: `Domain: example.net
-Removed: b.ns.example.net., c.ns.example.net.`,
-		},
-		{
-			name:       "domain whose delegation listed them",
-			target:     domain,
-			delegation: []string{nsA, nsB, nsC},
-		},
-	}
 
-	for _, tt := range tests {
+	prev := saved(map[string]*state.NameserverRecordState{
-		t.Run(tt.name, func(t *testing.T) {
+		nsA: answered(map[string][]string{"A": {ip1}}),
-			t.Parallel()
+		nsB: answered(map[string][]string{"A": {ip1}}),
+		nsC: failed(),
+	})
+	current := saved(map[string]*state.NameserverRecordState{
+		nsA: answered(map[string][]string{"A": {ip1}}),
+	})
 
-			cfg := defaultTestConfig(t)
+	w.DetectHostnameChanges(t.Context(), domain, prev, current)
-			cfg.Domains = []string{domain}
+	w.DetectHostnameChanges(t.Context(), host, prev, current)
 
-			deps := newTestDeps(t, cfg)
+	title := "NS Change: " + host
-			w := watcher.NewForTest(
+	want := `Hostname: www.example.net
-				cfg, deps.state, nil, nil, nil, deps.notifier,
+Removed: b.ns.example.net., c.ns.example.net.`
-			)
 
-			deps.state.SetDomainState(domain, &state.DomainState{
+	got := notifier.getNotifications()
-				Nameservers: tt.delegation,
+	if len(got) != 1 || got[0].Title != title || got[0].Message != want {
-			})
+		t.Errorf("sent %v, want one %q with message:\n%s", got, title, want)
-
-			prev := saved(map[string]*state.NameserverRecordState{
-				nsA: answered(map[string][]string{"A": {ip1}}),
-				nsB: answered(map[string][]string{"A": {ip1}}),
-				nsC: failed(),
-			})
-			current := saved(map[string]*state.NameserverRecordState{
-				nsA: answered(map[string][]string{"A": {ip1}}),
-			})
-
-			w.DetectHostnameChanges(t.Context(), tt.target, prev, current)
-
-			got := deps.notifier.getNotifications()
-
-			if tt.want == "" {
-				if len(got) != 0 {
-					t.Errorf("sent %v, want nothing", got)
-				}
-
-				return
-			}
-
-			title := "NS Change: " + tt.target
-			if len(got) != 1 || got[0].Title != title ||
-				got[0].Message != tt.want {
-				t.Errorf("sent %v, want one %q with message:\n%s",
-					got, title, tt.want)
-			}
-		})
 	}
 }
 

internal/watcher/watcher.go

@@ -327,25 +327,25 @@ func (w *Watcher) checkDomain(
 		w.detectNSAddressChanges(ctx, domain, prevAddresses, addresses)
 	}
 
-	// A domain that does not exist has no records of its own: none are
-	// asked for, and those saved by an earlier check are removed.
-	// Otherwise the apex domain's records are also checked and saved as
-	// a hostname's, so that the port and TLS checks find its addresses.
-	// Notifications about them name it as a domain (see nameLine). They
-	// are checked before the domain's new nameservers are saved:
-	// detectNSDisappearances reads those of the previous check.
-	if nxdomain {
-		w.state.DeleteHostnameState(domain)
-	} else {
-		w.checkHostname(ctx, domain)
-	}
-
 	w.state.SetDomainState(domain, &state.DomainState{
 		Nameservers:         nameservers,
 		NameserverAddresses: addresses,
 		NXDomain:            nxdomain,
 		LastChecked:         now,
 	})
+
+	// A domain that does not exist has no records of its own: none are
+	// asked for, and those saved by an earlier check are removed.
+	if nxdomain {
+		w.state.DeleteHostnameState(domain)
+
+		return
+	}
+
+	// The apex domain's records are also checked and saved as a
+	// hostname's, so that the port and TLS checks find its addresses.
+	// Notifications about them name it as a domain (see nameLine).
+	w.checkHostname(ctx, domain)
 }
 
 func (w *Watcher) detectNSChanges(
@@ -772,30 +772,23 @@ func (w *Watcher) detectRecordChanges(
 	}
 }
 
-// detectNSDisappearances sends one NS Change listing the nameservers of
+// detectNSDisappearances sends one NS Change for a hostname, listing
-// the previous check that are no longer those of the zone hostname is
+// the nameservers of the previous check that are no longer those of its
-// in. For a configured apex domain it leaves out those of the domain's
+// zone. Nothing is sent for a configured apex domain, whose removed
-// delegation on the previous check, which detectNSChanges notifies when
+// nameservers detectNSChanges notifies.
-// they are removed from it; checkDomain saves the new delegation only
-// after this runs.
 func (w *Watcher) detectNSDisappearances(
 	ctx context.Context,
 	hostname string,
 	prev, current *state.HostnameState,
 ) {
-	var delegation []string
-
 	if w.isDomain(hostname) {
-		if domainState, ok := w.state.GetDomainState(hostname); ok {
+		return
-			delegation = domainState.Nameservers
-		}
 	}
 
 	var removed []string
 
 	for ns := range prev.RecordsByNameserver {
-		_, ok := current.RecordsByNameserver[ns]
+		if _, ok := current.RecordsByNameserver[ns]; !ok {
-		if !ok && !slices.Contains(delegation, ns) {
 			removed = append(removed, ns)
 		}
 	}
@@ -807,8 +800,8 @@ func (w *Watcher) detectNSDisappearances(
 	slices.Sort(removed)
 
 	msg := fmt.Sprintf(
-		"%s\nRemoved: %s",
+		"Hostname: %s\nRemoved: %s",
-		w.nameLine(hostname),
+		hostname,
 		strings.Join(removed, ", "),
 	)
 

internal/watcher/watcher_test.go

@@ -558,9 +558,6 @@ func TestDomainThatDoesNotExist(t *testing.T) {
 // nameservers and without nxdomain, and its records, asked at the
 // codeberg.page servers, are saved. Those are testSmallDomain's two
 // nameservers; github.io, the zone of the README's example, has eight.
-// The previous check saved a delegation to oldNS1, now withdrawn, and
-// records asked at oldNS1: the NS Change of its delegation removes
-// oldNS1, and no other NS Change lists it again.
 func TestDomainWithNoDelegationOfItsOwn(t *testing.T) {
 	t.Parallel()
 
@@ -576,15 +573,6 @@ func TestDomainWithNoDelegationOfItsOwn(t *testing.T) {
 
 		w, deps = newTestWatcher(t, cfg)
 
-		deps.state.SetDomainState(domain, &state.DomainState{
-			Nameservers: []string{oldNS1},
-		})
-		deps.state.SetHostnameState(domain, saved(
-			map[string]*state.NameserverRecordState{
-				oldNS1: answered(map[string][]string{"A": {oldIP}}),
-			},
-		))
-
 		err := checkOnce(ctx, w, deps)
 
 		// A domain saved as not existing has no records to wait for;
@@ -605,22 +593,6 @@ func TestDomainWithNoDelegationOfItsOwn(t *testing.T) {
 	if _, ok := deps.state.GetHostnameState(domain); !ok {
 		t.Errorf("no records saved for %s", domain)
 	}
-
-	title := "NS Change: " + domain
-	want := "Domain: " + domain + "\nAdded: \nRemoved: " + oldNS1
-
-	var changes []notification
-
-	for _, n := range deps.notifier.getNotifications() {
-		if n.Title == title {
-			changes = append(changes, n)
-		}
-	}
-
-	if len(changes) != 1 || changes[0].Message != want {
-		t.Errorf("sent %v, want one %q with message:\n%s",
-			changes, title, want)
-	}
 }
 
 func TestNSAddressChangeDetection(t *testing.T) {