fix: a V4 swap action not in the deployed shape is shown as not decoded (closes #358)

The four V4 swap actions are read only as the parameter structs deployed
on mainnet and Sepolia. ethers decoded the newer v4-periphery structs,
which add minHopPriceX36, as the deployed ones without an error, and the
newer multi-hop exact-in struct showed the offset of its hop-price array
as the swap amount. A decode now counts only when encoding it again gives
back the same bytes. A swap action that fails that marks its step "V4
Swap (could not be decoded)", and a side of the swap that its SETTLE or
TAKE did not name reads "Unknown (could not be decoded)" instead of
another step's token and figure. The README records both.

Model: opus-5-5

README.md

@@ -1125,14 +1125,18 @@ read:
 
 The swap's `Token In` and `Token Out` lines name a currency, not an amount; each
 reads `Unknown (not named in the calldata)` when the decoder found no token for
-that side. An `UNWRAP_WETH` step makes `Token Out` ETH only when the output side
-is WETH, on mainnet or Sepolia, or when no step set the output side; a WETH
-`Min. received` figure then reads in ETH. Otherwise `Token Out` and
-`Min. received` keep the output side's own token and figure, whether the swap
-was paid in ETH or in a token: a V2 exact-out swap that buys USDC and then
-unwraps the WETH it did not spend shows USDC. The token permission warning on
-the signature screen has its own amount wording, including `Unknown`; the
-SignApproval section below describes it.
+that side, or `Unknown (could not be decoded)` instead when a V4 swap action in
+the transaction could not be read (see Transaction Decoding below). A V4 step
+whose swap action could not be read still sets each side as a swap step does,
+and a side its `SETTLE` or `TAKE` did not name is then unknown: no other step's
+token or figure is shown for it. An `UNWRAP_WETH` step makes `Token Out` ETH
+only when the output side is WETH, on mainnet or Sepolia, or when no step set
+the output side; a WETH `Min. received` figure then reads in ETH. Otherwise
+`Token Out` and `Min. received` keep the output side's own token and figure,
+whether the swap was paid in ETH or in a token: a V2 exact-out swap that buys
+USDC and then unwraps the WETH it did not spend shows USDC. The token permission
+warning on the signature screen has its own amount wording, including `Unknown`;
+the SignApproval section below describes it.
 
 The swap's `Deadline` line is the router's deadline as a UTC date and time, e.g.
 `2026-02-27 08:25:51`. A JavaScript date reaches only to 275760-09-13 00:00:00
@@ -2747,7 +2751,11 @@ Currently supported:
   or recipient, and amount.
 - **Uniswap Universal Router**: `execute()` calls — shows swap direction (e.g.
   "Swap USDT → ETH"), token addresses, amounts, execution steps, and deadline.
-  Decodes Permit2, V2/V3/V4 swaps, wrap/unwrap, and balance checks.
+  Decodes Permit2, V2/V3/V4 swaps, wrap/unwrap, and balance checks. A V4 swap
+  action is read only in the parameter shape deployed on mainnet and Sepolia,
+  not in the newer one on `v4-periphery` `main`, which adds a `minHopPriceX36`
+  field. An action in any other shape is not read, and its step is listed as
+  `V4 Swap (could not be decoded)`.
 
 ### Non-Goals Forever
 

src/shared/uniswap.js

@@ -53,6 +53,11 @@ function formatAmount(raw, decimals) {
 // on a scale — not as a token name, and not as a quantity.
 const UNNAMED_CURRENCY = "Unknown (not named in the calldata)";
 
+// The same refusal when a V4 swap action could not be read (see
+// decodeExactly()). That action names both of its currencies, so saying the
+// calldata did not name one would be false.
+const UNDECODED_CURRENCY = "Unknown (could not be decoded)";
+
 // Explicit presence, never truthiness. Every gate in this file that guards a
 // decoded value goes through here: an address is never falsy once set, but an
 // amount of 0n is, and a gate that cannot tell a genuine zero from an absent
@@ -295,6 +300,24 @@ function v4ExactInAmount(raw) {
     return raw === 0n ? OPEN_DELTA : raw;
 }
 
+// The V4 swap actions are read only in the parameter structs V4Router has
+// deployed on mainnet and Sepolia. v4-periphery `main` has since added a
+// `minHopPriceX36` field to all four (`src/interfaces/IV4Router.sol`), and
+// reading a shape nobody has deployed would be guessing. ethers alone would
+// read the newer structs anyway: it takes whatever word sits where a
+// deployed field would be, ignores bytes left over, and holds back an error
+// in a field until that field is used. The newer multi-hop exact-in struct
+// then yields the offset of its hop-price array as `amountIn`. So a decode
+// counts only when encoding the result again gives back the same bytes;
+// otherwise this throws, and decodeV4Swap() marks the step as not decoded.
+function decodeExactly(types, data) {
+    const decoded = coder.decode(types, data);
+    if (coder.encode(types, decoded) !== data) {
+        throw new Error("Not in the deployed V4 parameter shape.");
+    }
+    return decoded;
+}
+
 // Decode V4_SWAP (command 0x10) input bytes.
 // The input is ABI-encoded as (bytes actions, bytes[] params).
 // We extract token addresses from SETTLE (input) and TAKE (output) sub-actions,
@@ -309,6 +332,10 @@ function decodeV4Swap(input) {
         let takeToken = null;
         let amountIn = null;
         let amountOutMin = null;
+        // Set when a swap action's parameters are not in the deployed shape
+        // (see decodeExactly()), so nothing was read from that action. SETTLE
+        // and TAKE may still name both currencies.
+        let swapUndecoded = false;
 
         for (let i = 0; i < actions.length; i++) {
             const actionId = actions[i];
@@ -337,7 +364,7 @@ function decodeV4Swap(input) {
                         //   tuple(address,uint24,int24,address,bytes)[] path,
                         //   uint128 amountIn, uint128 amountOutMin)
                         try {
-                            const s = coder.decode(
+                            const s = decodeExactly(
                                 [
                                     "tuple(address,tuple(address,uint24,int24,address,bytes)[],uint128,uint128)",
                                 ],
@@ -355,13 +382,13 @@ function decodeV4Swap(input) {
                                 amountOutMin = s[0][3];
                             }
                         } catch {
-                            // Fall through — SETTLE/TAKE will provide tokens
+                            swapUndecoded = true;
                         }
                     } else {
                         // ExactInputSingleParams: (tuple(address,address,uint24,int24,address) poolKey,
                         //   bool zeroForOne, uint128 amountIn, uint128 amountOutMin, bytes hookData)
                         try {
-                            const s = coder.decode(
+                            const s = decodeExactly(
                                 [
                                     "tuple(tuple(address,address,uint24,int24,address),bool,uint128,uint128,bytes)",
                                 ],
@@ -384,7 +411,7 @@ function decodeV4Swap(input) {
                                 amountOutMin = s[0][3];
                             }
                         } catch {
-                            // Fall through
+                            swapUndecoded = true;
                         }
                     }
                 } else if (
@@ -393,7 +420,7 @@ function decodeV4Swap(input) {
                 ) {
                     if (actionId === V4_SWAP_EXACT_OUT) {
                         try {
-                            const s = coder.decode(
+                            const s = decodeExactly(
                                 [
                                     "tuple(address,tuple(address,uint24,int24,address,bytes)[],uint128,uint128)",
                                 ],
@@ -405,11 +432,11 @@ function decodeV4Swap(input) {
                                 settleToken = path[path.length - 1][0];
                             }
                         } catch {
-                            // Fall through
+                            swapUndecoded = true;
                         }
                     } else {
                         try {
-                            const s = coder.decode(
+                            const s = decodeExactly(
                                 [
                                     "tuple(tuple(address,address,uint24,int24,address),bool,uint128,uint128,bytes)",
                                 ],
@@ -426,7 +453,7 @@ function decodeV4Swap(input) {
                                     ? poolKey[1]
                                     : poolKey[0];
                         } catch {
-                            // Fall through
+                            swapUndecoded = true;
                         }
                     }
                 }
@@ -440,6 +467,7 @@ function decodeV4Swap(input) {
             tokenOut: takeToken,
             amountIn,
             amountOutMin,
+            swapUndecoded,
         };
     } catch {
         return null;
@@ -465,6 +493,7 @@ function decode(data, toAddress, sources) {
         let minOutput = null;
         let hasUnwrapWeth = false;
         let hasV2ExactOut = false;
+        let swapUndecoded = false;
         const commandNames = [];
 
         // THE INVARIANT: an amount and the token it is counted in always come
@@ -567,7 +596,20 @@ function decode(data, toAddress, sources) {
 
                 if (cmdId === 0x10) {
                     const v4 = decodeV4Swap(inputs[i]);
-                    if (v4) {
+                    if (v4 && v4.swapUndecoded) {
+                        // The unread swap action named this step's currencies
+                        // and amounts, so the step is marked and still sets
+                        // both sides as a swap step does. A side its SETTLE or
+                        // TAKE did not name is set undetermined, not left to
+                        // an earlier or later step's token and figure.
+                        swapUndecoded = true;
+                        commandNames[i] += " (could not be decoded)";
+                        if (!inputEstablished) {
+                            setInput(v4.tokenIn, v4.amountIn);
+                        }
+                        outputToken = v4.tokenOut;
+                        minOutput = v4.amountOutMin;
+                    } else if (v4) {
                         setInputOnce(v4.tokenIn, v4.amountIn);
                         // Always update output: last swap step wins. A step
                         // that carries the Min. received figure but decoded no
@@ -591,16 +633,19 @@ function decode(data, toAddress, sources) {
             }
         }
 
-        // Resolve token info. A null token on either side means the calldata
-        // named no currency for it; tokenInfo() refuses rather than calling it
-        // ETH. UNWRAP_WETH turns WETH into ETH, so it makes the output ETH
-        // when the output side is WETH, or when no step set the output side.
-        // Any other output keeps its own token and figure: a swap that buys
-        // USDC and then unwraps the WETH it did not spend receives USDC.
+        // Resolve token info. A null token on either side means no step named
+        // a currency for it, or a V4 step whose swap action went unread left
+        // it undetermined; tokenInfo() refuses rather than calling it ETH.
+        // UNWRAP_WETH turns WETH into ETH, so it makes the output ETH when the
+        // output side is WETH, or when no step set the output side. A step
+        // whose swap action went unread did set it, to undetermined. Any other
+        // output keeps its own token and figure: a swap that buys USDC and
+        // then unwraps the WETH it did not spend receives USDC.
         const outputIsWeth =
             present(outputToken) &&
             WETH_ADDRESSES.includes(outputToken.toLowerCase());
-        const outputUnset = !present(outputToken) && !present(minOutput);
+        const outputUnset =
+            !present(outputToken) && !present(minOutput) && !swapUndecoded;
         const inInfo = tokenInfo(inputToken, sources);
         const outInfo =
             hasUnwrapWeth && (outputIsWeth || outputUnset)
@@ -640,7 +685,10 @@ function decode(data, toAddress, sources) {
             // rather than going missing or naming a token by default. Same
             // wording as the Token Out refusal below: the two sides of this
             // screen must not describe the same condition in two ways.
-            details.push({ label: "Token In", value: UNNAMED_CURRENCY });
+            details.push({
+                label: "Token In",
+                value: swapUndecoded ? UNDECODED_CURRENCY : UNNAMED_CURRENCY,
+            });
         }
 
         if (present(inputAmount)) {
@@ -703,7 +751,10 @@ function decode(data, toAddress, sources) {
             // rather than going missing or naming a token by default, and a
             // Min. received figure below it is never attached to a token the
             // calldata did not state.
-            details.push({ label: "Token Out", value: UNNAMED_CURRENCY });
+            details.push({
+                label: "Token Out",
+                value: swapUndecoded ? UNDECODED_CURRENCY : UNNAMED_CURRENCY,
+            });
         }
 
         if (present(minOutput)) {

tests/uniswap.test.js

@@ -163,6 +163,122 @@ function encodeV4ExactInSingle(currency0, currency1, amountIn, amountOutMin) {
     );
 }
 
+// Each V4 swap action's parameters in two shapes: the struct V4Router has
+// deployed on mainnet and Sepolia, and the one v4-periphery `main` has since
+// moved to, which adds a `minHopPriceX36` field. Each swaps WETH for USDC.
+const POOL_KEY = "tuple(address,address,uint24,int24,address)";
+const PATH_KEY = "tuple(address,uint24,int24,address,bytes)";
+const WETH_USDC_POOL = [WETH_ADDR, USDC_ADDR, 100, 1, ZERO_ADDR];
+const ONE_WETH = 1000000000000000000n;
+const V4_SWAP_ACTION_SHAPES = [
+    {
+        action: "SWAP_EXACT_IN_SINGLE",
+        id: 0x06,
+        deployed: coder.encode(
+            [`tuple(${POOL_KEY},bool,uint128,uint128,bytes)`],
+            [[WETH_USDC_POOL, true, ONE_WETH, 990000n, "0x"]],
+        ),
+        newer: coder.encode(
+            [`tuple(${POOL_KEY},bool,uint128,uint128,uint256,bytes)`],
+            [[WETH_USDC_POOL, true, ONE_WETH, 990000n, 0n, "0x"]],
+        ),
+    },
+    {
+        action: "SWAP_EXACT_IN",
+        id: 0x07,
+        deployed: coder.encode(
+            [`tuple(address,${PATH_KEY}[],uint128,uint128)`],
+            [
+                [
+                    WETH_ADDR,
+                    [[USDC_ADDR, 100, 1, ZERO_ADDR, "0x"]],
+                    ONE_WETH,
+                    990000n,
+                ],
+            ],
+        ),
+        newer: coder.encode(
+            [`tuple(address,${PATH_KEY}[],uint256[],uint128,uint128)`],
+            [
+                [
+                    WETH_ADDR,
+                    [[USDC_ADDR, 100, 1, ZERO_ADDR, "0x"]],
+                    [],
+                    ONE_WETH,
+                    990000n,
+                ],
+            ],
+        ),
+    },
+    {
+        action: "SWAP_EXACT_OUT_SINGLE",
+        id: 0x08,
+        deployed: coder.encode(
+            [`tuple(${POOL_KEY},bool,uint128,uint128,bytes)`],
+            [[WETH_USDC_POOL, true, 990000n, ONE_WETH, "0x"]],
+        ),
+        newer: coder.encode(
+            [`tuple(${POOL_KEY},bool,uint128,uint128,uint256,bytes)`],
+            [[WETH_USDC_POOL, true, 990000n, ONE_WETH, 0n, "0x"]],
+        ),
+    },
+    {
+        action: "SWAP_EXACT_OUT",
+        id: 0x09,
+        deployed: coder.encode(
+            [`tuple(address,${PATH_KEY}[],uint128,uint128)`],
+            [
+                [
+                    USDC_ADDR,
+                    [[WETH_ADDR, 100, 1, ZERO_ADDR, "0x"]],
+                    990000n,
+                    ONE_WETH,
+                ],
+            ],
+        ),
+        newer: coder.encode(
+            [`tuple(address,${PATH_KEY}[],uint256[],uint128,uint128)`],
+            [
+                [
+                    USDC_ADDR,
+                    [[WETH_ADDR, 100, 1, ZERO_ADDR, "0x"]],
+                    [],
+                    990000n,
+                    ONE_WETH,
+                ],
+            ],
+        ),
+    },
+];
+
+// Helper: execute() with one V4_SWAP step holding the swap action, then
+// SETTLE of WETH and TAKE of USDC.
+function v4SwapCalldata(actionId, swapParams) {
+    return buildExecute(
+        "0x10",
+        [
+            encodeV4Swap(new Uint8Array([actionId, V4_SETTLE_ID, V4_TAKE_ID]), [
+                swapParams,
+                encodeV4Settle(WETH_ADDR),
+                encodeV4Take(USDC_ADDR),
+            ]),
+        ],
+        9999999999n,
+    );
+}
+
+// V4 SETTLE_ALL (currency, maxAmount) and TAKE_ALL (currency, minAmount). The
+// decoder reads neither, so in a V4_SWAP of a swap action and these, only the
+// swap action names the currencies.
+const V4_SETTLE_ALL_ID = 0x0c;
+const V4_TAKE_ALL_ID = 0x0f;
+function encodeV4SettleAll(currency, maxAmount) {
+    return coder.encode(["address", "uint256"], [currency, maxAmount]);
+}
+function encodeV4TakeAll(currency, minAmount) {
+    return coder.encode(["address", "uint256"], [currency, minAmount]);
+}
+
 function detail(result, label) {
     return result.details.find((d) => d.label === label);
 }
@@ -203,9 +319,157 @@ describe("uniswap decoder", () => {
             result.details.find((d) => d.label === "Min. received").value,
         ).toBe("0.0002 ETH");
 
+        // Real mainnet calldata is in the deployed shape, so its V4 step is
+        // not said to be undecoded.
         const steps = result.details.find((d) => d.label === "Steps");
-        expect(steps.value).toContain("Permit2 Permit");
-        expect(steps.value).toContain("V4 Swap");
+        expect(steps.value).toBe("Permit2 Permit → V4 Swap");
+    });
+
+    test.each(V4_SWAP_ACTION_SHAPES)(
+        "a V4 $action in the deployed shape is read",
+        ({ id, deployed }) => {
+            const result = uniswap.decode(
+                v4SwapCalldata(id, deployed),
+                ROUTER_ADDR,
+            );
+            expect(detail(result, "Steps").value).toBe("V4 Swap");
+        },
+    );
+
+    // https://git.eeqj.de/sneak/AutistMask/issues/358 — before it, all four
+    // newer structs decoded as the deployed ones without an error, and the
+    // newer SWAP_EXACT_IN showed the offset of its hop-price array as Amount
+    // ("0.0000000000000004 WETH") and its amountIn as Min. received.
+    test.each(V4_SWAP_ACTION_SHAPES)(
+        "a V4 $action in the newer periphery shape is shown as not decoded",
+        ({ id, newer }) => {
+            const result = uniswap.decode(
+                v4SwapCalldata(id, newer),
+                ROUTER_ADDR,
+            );
+            expect(detail(result, "Amount")).toBeUndefined();
+            expect(detail(result, "Min. received")).toBeUndefined();
+            expect(detail(result, "Steps").value).toBe(
+                "V4 Swap (could not be decoded)",
+            );
+            // SETTLE and TAKE keep their own shape and still name both sides.
+            expect(detail(result, "Token In").address).toBe(WETH_ADDR);
+            expect(detail(result, "Token Out").address).toBe(USDC_ADDR);
+        },
+    );
+
+    // Only the unread swap action names the currencies here. The token lines
+    // must not say the calldata did not name them.
+    test.each(V4_SWAP_ACTION_SHAPES)(
+        "a V4 $action in the newer shape, then SETTLE_ALL and TAKE_ALL, says both tokens could not be decoded",
+        ({ id, newer }) => {
+            const data = buildExecute(
+                "0x10",
+                [
+                    encodeV4Swap(
+                        new Uint8Array([id, V4_SETTLE_ALL_ID, V4_TAKE_ALL_ID]),
+                        [
+                            newer,
+                            encodeV4SettleAll(WETH_ADDR, ONE_WETH),
+                            encodeV4TakeAll(USDC_ADDR, 990000n),
+                        ],
+                    ),
+                ],
+                9999999999n,
+            );
+            const result = uniswap.decode(data, ROUTER_ADDR);
+            expect(detail(result, "Steps").value).toBe(
+                "V4 Swap (could not be decoded)",
+            );
+            expect(detail(result, "Token In").value).toBe(
+                "Unknown (could not be decoded)",
+            );
+            expect(detail(result, "Token Out").value).toBe(
+                "Unknown (could not be decoded)",
+            );
+        },
+    );
+
+    // The user receives the V4 step's USDC, which only its unread swap
+    // action names. The V3 step's WETH and its Min. received figure were
+    // shown instead.
+    test.each(V4_SWAP_ACTION_SHAPES)(
+        "a V3 step, then a V4 $action in the newer shape and TAKE_ALL, does not show the V3 step's output",
+        ({ id, newer }) => {
+            const data = buildExecute(
+                solidityPacked(["uint8", "uint8"], [0x00, 0x10]),
+                [
+                    encodeV3SwapExactIn(USER_ADDR, 2000000n, ONE_WETH, [
+                        USDT_ADDR,
+                        WETH_ADDR,
+                    ]),
+                    encodeV4Swap(new Uint8Array([id, V4_TAKE_ALL_ID]), [
+                        newer,
+                        encodeV4TakeAll(USDC_ADDR, 990000n),
+                    ]),
+                ],
+                9999999999n,
+            );
+            const result = uniswap.decode(data, ROUTER_ADDR);
+            expect(result.name).toBe("Uniswap Swap");
+            expect(detail(result, "Amount").value).toBe("2.0000 USDT");
+            expect(detail(result, "Token Out").value).toBe(
+                "Unknown (could not be decoded)",
+            );
+            expect(detail(result, "Min. received")).toBeUndefined();
+        },
+    );
+
+    // The user pays the V4 step's WETH, which only its unread swap action
+    // names. The V3 step's USDC and its amount were shown instead.
+    test.each(V4_SWAP_ACTION_SHAPES)(
+        "a V4 $action in the newer shape and SETTLE_ALL, then a V3 step, does not show the V3 step's input",
+        ({ id, newer }) => {
+            const data = buildExecute(
+                solidityPacked(["uint8", "uint8"], [0x10, 0x00]),
+                [
+                    encodeV4Swap(new Uint8Array([id, V4_SETTLE_ALL_ID]), [
+                        newer,
+                        encodeV4SettleAll(WETH_ADDR, ONE_WETH),
+                    ]),
+                    encodeV3SwapExactIn(
+                        USER_ADDR,
+                        990000n,
+                        980000000000000000n,
+                        [USDC_ADDR, DAI_ADDR],
+                    ),
+                ],
+                9999999999n,
+            );
+            const result = uniswap.decode(data, ROUTER_ADDR);
+            expect(result.name).toBe("Uniswap Swap");
+            expect(detail(result, "Token In").value).toBe(
+                "Unknown (could not be decoded)",
+            );
+            expect(detail(result, "Amount")).toBeUndefined();
+            expect(detail(result, "Min. received").value).toBe("0.9800 DAI");
+        },
+    );
+
+    // UNWRAP_WETH makes Token Out ETH when no step set the output side. An
+    // unread swap action's step did set it, to undetermined.
+    test("an UNWRAP_WETH after an unread V4 swap action does not make Token Out ETH", () => {
+        const { id, newer } = V4_SWAP_ACTION_SHAPES[0];
+        const data = buildExecute(
+            solidityPacked(["uint8", "uint8"], [0x10, 0x0c]),
+            [
+                encodeV4Swap(new Uint8Array([id, V4_TAKE_ALL_ID]), [
+                    newer,
+                    encodeV4TakeAll(USDC_ADDR, 990000n),
+                ]),
+                encodeWrapEth(USER_ADDR, 0n), // UNWRAP_WETH, same encoding
+            ],
+            9999999999n,
+        );
+        const result = uniswap.decode(data, ROUTER_ADDR);
+        expect(detail(result, "Token Out").value).toBe(
+            "Unknown (could not be decoded)",
+        );
     });
 
     test("decodes V2_SWAP_EXACT_IN with known tokens", () => {
@@ -548,9 +812,11 @@ describe("uniswap decoder", () => {
         const result = uniswap.decode(data, ROUTER_ADDR);
         expect(result).not.toBeNull();
 
+        // The V4 swap action's parameters are empty, so that step is said to
+        // be undecoded.
         const steps = result.details.find((d) => d.label === "Steps");
         expect(steps.value).toBe(
-            "Permit2 Permit \u2192 V4 Swap \u2192 Unwrap WETH",
+            "Permit2 Permit \u2192 V4 Swap (could not be decoded) \u2192 Unwrap WETH",
         );
     });
 

tests/uniswapUndeterminedTokenIn.test.js

@@ -97,7 +97,11 @@ describe("an execute() whose input currency never decoded", () => {
         ]);
 
     test("says the input token is unknown instead of naming ETH", () => {
-        expect(detail(data(), "Token In").value).toBe(REFUSAL);
+        // The swap action that would name it could not be read, so the line
+        // says that rather than REFUSAL's "not named in the calldata".
+        expect(detail(data(), "Token In").value).toBe(
+            "Unknown (could not be decoded)",
+        );
     });
 
     test("keeps a Token In line, so the screen never omits what is paid", () => {