fix: with no Amount line, the user's takes the total adds up get lines of their own (closes #659)

When a step this decoder cannot read, an unreadable permit, or a take
of Token In with an unknown amount held back the Amount line, the
amount the step that sets the input side states, and each later take
of Token In added to it, appeared on no line, while other takes kept
their own Moved from the sender lines. Those takes now get the same
lines, first. The first step's amount gets them only when the user
pays that step (a V2 or V3 step with payerIsUser true, a V4 step the
user pays some of its input token, or a WRAP_ETH): one paid from the
router takes nothing from the wallet. Routes with an Amount line read
as before.

Model: opus-5-5

README.md

@@ -461,13 +461,15 @@ address, the transaction assertions run against the raw signed transaction
 captured at `eth_sendRawTransaction` rather than against anything the extension
 reported, rejecting each prompt is required to return a rejection to the page
 rather than hang or resolve, a network switch request is required to leave the
-stored network unchanged and send no `chainChanged` until it is approved, a
+stored network unchanged and send no `chainChanged` until it is approved, the
-network switch in Settings is required to send the page `chainChanged` with the
+popup open all along is required to show the `[TESTNET]` banner once a switch to
-new chain id, a prompt raised while another approval window has focus is
+Sepolia is approved and to drop it once the switch back is, a network switch in
-required to open a window of its own, and the password is required to be absent
+Settings is required to send the page `chainChanged` with the new chain id, a
-from every message the approval window sends to the background — with the
+prompt raised while another approval window has focus is required to open a
-message that would carry it required to be present, so that check cannot pass by
+window of its own, and the password is required to be absent from every message
-observing nothing. That last one is the standing floor under
+the approval window sends to the background — with the message that would carry
+it required to be present, so that check cannot pass by observing nothing. That
+last one is the standing floor under
 [#157](https://git.eeqj.de/sneak/AutistMask/issues/157).
 
 The limits of that coverage and of the rest of the Chrome suite, none of them
@@ -603,9 +605,10 @@ suite), wallet creation through the UI, the Add Token screen, and the dApp round
 trips — `eth_requestAccounts`, `personal_sign`, `wallet_switchEthereumChain`
 rejected and then approved, `eth_sendTransaction`, and a closed approval window
 rejecting with EIP-1193 4001 — driven through the real content script,
-background page and approval windows. The `personal_sign` prompt is also
+background page and approval windows. The popup open all along is required to
-required to fit its window without scrolling sideways, with the extension's
+show the `[TESTNET]` banner once the switch to Sepolia is approved and to drop
-pages at 170% zoom.
+it once the switch back is. The `personal_sign` prompt is also required to fit
+its window without scrolling sideways, with the extension's pages at 170% zoom.
 
 The suite lives in `tests/e2e/firefox/`. Its WebDriver client (`driver.js`) has
 **no npm dependencies at all**: it is built on global `fetch` and
@@ -1564,20 +1567,29 @@ such as an edit typed into Settings and not yet saved. Home is the one screen
 "Back" always re-renders, so the wallet list reflects anything that changed
 while the user was away from it.
 
-A network switch in Settings leaves every screen beneath Settings showing the
+A network switch leaves every screen on the page showing the previous network.
-previous network, so after it "Back" behaves as in a reopened popup: every
+The user makes it in Settings, or approves a site's request and the background
-screen on the stack counts as not yet rendered, and the stack is cut at the
+saves it. Any other popup open meanwhile takes the switch from the stored
-first screen that cannot be rendered from saved state, such as Send or AddToken,
+record, even one saved while it was opening, and never switches the network
-or at AddressToken for any token but the native one, because that token was
+itself. A switch the user picks in its Settings while it takes one is made after
-picked on the previous network. The cut stack is saved with the switch, so a
+it, not overwritten by it. An approval window does not take the switch. After
-popup closed straight after it and reopened onto Settings lands in the same
+the switch, whichever way the page got it, "Back" behaves as in a reopened
-place. "Back" then renders the screen it lands on for the new network, and
+popup: every screen on the stack counts as not yet rendered, and the stack is
-anything typed there and not saved, which belonged to the previous network, is
+cut at the first screen that cannot be rendered from saved state, such as Send
-dropped. ConfirmTx, WaitTx, SuccessTx, ErrorTx and TransactionDetail are
+or AddToken, or at AddressToken for any token but the native one, because that
-rendered instead for the network of the transaction they show: the network it
+token was picked on the previous network and is no longer selected. The cut
-was reviewed on for ConfirmTx, and the network it was sent on for the others.
+stack is saved with the popup's new network, so a popup closed straight after
-Without a wallet the stack is not cut, because it starts at Welcome, which shows
+and reopened lands in the same place. The screen on top is drawn again for the
-nothing from a network.
+new network: Settings in place, and any other screen as a reopened popup draws
+it, so Home takes the place of one that cannot be rendered from saved state or
+of AddressToken for a token no longer selected. "Back" then renders the screen
+it lands on for the new network, and anything typed there and not saved, which
+belonged to the previous network, is dropped. ConfirmTx, WaitTx, SuccessTx,
+ErrorTx and TransactionDetail are rendered instead for the network of the
+transaction they show: the network it was reviewed on for ConfirmTx, and the
+network it was sent on for the others. Without a wallet the stack is not cut and
+only Settings is drawn again, because the stack starts at Welcome, and Welcome
+and AddWallet show nothing from a network.
 
 Every screen that holds secret material in the page registers a cleanup with
 `onViewLeave()` (`src/popup/views/helpers.js`), which `showView()` runs on every
@@ -3251,15 +3263,25 @@ Currently supported:
   of a token other than `Token In`; one of `Token In` after an amount that is
   not a quantity (a V4 open delta, `ALREADY_PAID`, which keep their wording on
   the `Amount` line, or no stated amount, as of a V4 exact-out step); and one
-  whose amount the decoder does not know. When the step that sets the input side
+  whose amount the decoder does not know. When there is no `Amount` line, each
-  states no amount, the user pays it some of its input token, and there is no
+  take the total counts gets them too, so that every amount the decoder reads is
-  `Amount` line, that step gets them too whenever another take's lines give a
+  shown: the amount the step that sets the input side states, when it is a
-  figure, or a `PERMIT2_TRANSFER_FROM` of its token gives one, on the lines
+  quantity and the user pays that step (a V2 or V3 step whose `payerIsUser` is
-  below or, into the router, on its `Paid to` line, so that figure cannot read
+  true, a V4 step the user pays some of its input token, or a `WRAP_ETH`, whose
-  as all that leaves. When it states no amount and the user pays it none of its
+  ETH comes from the transaction's value), and each later take of `Token In`
-  input token, as when the router pays it, that step takes none of that token
+  added to it. A step that sets the input side and is paid from the router takes
-  from the user's wallet and never gets them, with a permit or without. They
+  nothing from the user's wallet and gets none. A `PERMIT2_PERMIT` the decoder
-  come in step order, the step that sets the input side first when it has them:
+  cannot read, then V3 exact-ins of 600 USDT and 400 DAI paid by the user, give
+  lines for both amounts. When the step that sets the input side states no
+  amount, the user pays it some of its input token, and there is no `Amount`
+  line, that step gets them too whenever another take's lines give a figure, or
+  a `PERMIT2_TRANSFER_FROM` of its token gives one, on the lines below or, into
+  the router, on its `Paid to` line, so that figure cannot read as all that
+  leaves. When it states no amount and the user pays it none of its input token,
+  as when the router pays it, that step takes none of that token from the user's
+  wallet and never gets them, with a permit or without. They come in step order,
+  except that the step that sets the input side comes first when it has them,
+  followed, when there is no `Amount` line, by the other takes the total counts:
   `Moved from the sender`, its amount, worded as the `Amount` line words one, or
   `Unknown (could not be decoded)` when the decoder does not know it;
   `Token moved`, giving the token's address as the `Token In` line does; and

src/popup/index.js

@@ -5,12 +5,14 @@ const {
     state,
     saveState,
     onSaveFailure,
+    takeStoredNetwork,
     loadState,
 } = require("../shared/state");
 const { StateUnusableError } = require("../shared/stateSchema");
 const { log, setRuntimeDebug } = require("../shared/log");
 const { refreshPrices } = require("../shared/prices");
 const { refreshBalances } = require("../shared/balances");
+const { clearPopupCaches } = require("../shared/chainSwitch");
 const {
     $,
     showView,
@@ -22,6 +24,7 @@ const {
 } = require("./views/helpers");
 const { applyTheme } = require("./theme");
 const {
+    onStorageChanged,
     tabsGetCurrent,
     tabsGetZoom,
     windowsGetCurrent,
@@ -72,12 +75,13 @@ let refreshTimer = null;
 // lock, its results are copied onto the address records in `state` only if the
 // network it ran on is still the active one, on this page and in the stored
 // record; the background's switch, after the user approves a site's request,
-// changes only the stored record. A switch while the refresh ran cleared every
+// reaches this page only after the stored record (followNetworkSwitch() below).
-// address's balances (applyChainSwitchFields() in
+// A switch while the refresh ran cleared every address's balances
-// src/shared/chainSwitchFields.js), and the previous network's must not come
+// (applyChainSwitchFields() in src/shared/chainSwitchFields.js), and the
-// back over them (https://git.eeqj.de/sneak/AutistMask/issues/577). A dropped
+// previous network's must not come back over them
-// refresh is not recorded as done. Results are copied by address, so an address
+// (https://git.eeqj.de/sneak/AutistMask/issues/577). A dropped refresh is not
-// added or removed meanwhile is left as it is.
+// recorded as done. Results are copied by address, so an address added or
+// removed meanwhile is left as it is.
 async function doRefreshAndRender() {
     if (refreshInFlight) return;
     refreshInFlight = true;
@@ -147,6 +151,7 @@ const ctx = {
     renderWalletList,
     doRefreshAndRender,
     startRefresh,
+    restoreView,
     pageClosed: pageClosed.signal,
     showAddWalletView: () => {
         pushCurrentView();
@@ -214,6 +219,28 @@ function fallbackView() {
     showView("main");
 }
 
+// When the background saves a network switch, once the user approves a site's
+// request, or another popup page saves one, this page follows the stored
+// record. It takes the network the record names as a save reads it, holding
+// the lock, so no later save of this page writes the previous network back, and
+// then leaves the page as a switch in Settings leaves it. This page's own
+// switch in Settings is made under the lock as well (onChainSwitch() in
+// src/shared/chainSwitch.js), so a record naming a network other than this
+// page's always holds a switch saved elsewhere, and a switch the user picks
+// here while this waits for the lock is made after it.
+async function followNetworkSwitch() {
+    let switched = false;
+    // A failed save is reported by saveState() itself: see onSaveFailure().
+    await saveState((stored) => {
+        if (stored.networkId === state.networkId) return false;
+        settings.cutViewStack();
+        takeStoredNetwork(stored);
+        clearPopupCaches();
+        switched = true;
+    }).catch(() => {});
+    if (switched) settings.showNewNetwork();
+}
+
 // The background opens the approval window as wide as the page, but the
 // browser counts the window's frame in that width, and a screen taller than
 // the window takes a vertical scrollbar out of it too. So once the screen is
@@ -358,6 +385,17 @@ async function init() {
     settingsAddToken.init(ctx);
     deleteAddress.init(ctx);
 
+    // Only a record naming a network other than this page's is followed: the
+    // one this page's own switch in Settings saves names the network it
+    // already has, and a record naming none is no switch.
+    onStorageChanged((changes) => {
+        const written = changes.autistmask && changes.autistmask.newValue;
+        if (!written || !written.networkId) return;
+        if (written.networkId !== state.networkId) followNetworkSwitch();
+    });
+    // A switch saved since loadState() above, before there was a listener.
+    followNetworkSwitch();
+
     if (!state.hasWallet) {
         showView("welcome");
     } else {

src/popup/viewRouter.js

@@ -39,8 +39,8 @@ function markViewRendered(view) {
 }
 
 // Begin a fresh page-load scope. The popup gets one by being loaded, and
-// asks for one when the user switches the network, because every screen
+// asks for one after a network switch, because every screen then on the page
-// then on the page shows the previous network (views/settings.js); the
+// shows the previous network (showNewNetwork() in views/settings.js); the
 // unit tests, which simulate several page loads against one module
 // instance, ask for one too.
 function resetRenderedViews() {

src/popup/views/settings.js

@@ -38,6 +38,8 @@ const {
 
 const { notify, sendMessage } = require("../../shared/browserApi");
 
+let ctx;
+
 let versionClickCount = 0;
 let versionClickTimer = null;
 
@@ -243,7 +245,51 @@ async function renderSiteLists() {
     );
 }
 
-function init(ctx) {
+// A network switch, made by the user here or saved by the background once the
+// user approved a site's request (src/popup/index.js), leaves every screen on
+// the page showing the previous network. These two leave the page as README's
+// Screen Map describes, the first before the switch is saved, so that save
+// keeps the cut for a popup closed straight after, the second once `state`
+// holds the new network.
+//
+// The stack is cut at the first screen that cannot be rendered from saved
+// state, such as Send or AddToken, and at AddressToken unless it shows the
+// native token: any other token there was picked on the previous network, so
+// it is no longer selected either. Without a wallet the stack starts at
+// Welcome, which that cut would drop, and Welcome shows nothing from a network.
+function cutViewStack() {
+    if (!state.hasWallet) return;
+    if (state.selectedToken !== "ETH") {
+        const tokenView = state.viewStack.indexOf("address-token");
+        if (tokenView !== -1) {
+            state.viewStack = state.viewStack.slice(0, tokenView);
+        }
+        state.selectedToken = null;
+    }
+    state.viewStack = restorableStack(state.viewStack, state.currentView);
+}
+
+// Every screen counts as not yet rendered, so "Back" renders the one it lands
+// on for the new network. Settings on top is brought up to date in place;
+// any other screen is drawn again as a reopened popup draws it, which is Home
+// for one that cannot be rendered from saved state. Without a wallet any other
+// screen is Welcome or AddWallet, which show nothing from a network.
+function showNewNetwork() {
+    resetRenderedViews();
+    if (state.currentView === "settings") {
+        markViewRendered("settings");
+        $("settings-network").value = state.networkId;
+        $("settings-rpc").value = state.rpcUrl;
+        $("settings-blockscout").value = state.blockscoutUrl;
+        renderTrackedTokens();
+    } else if (state.hasWallet) {
+        ctx.restoreView();
+    }
+    updateDebugBanner(state.currentView);
+}
+
+function init(_ctx) {
+    ctx = _ctx;
     deleteWallet.init(ctx);
     showPhrase.init();
 
@@ -319,37 +365,18 @@ function init(ctx) {
 
     const networkSelect = $("settings-network");
     networkSelect.addEventListener("change", async () => {
+        // Whether `state` already has the network picked is asked only once
+        // the switch holds the lock: while an earlier pick waits for it,
+        // `state` still has the network before that pick, and a pick back to
+        // that network must still be made.
         const newId = networkSelect.value;
-        if (newId === state.networkId) return;
+        cutViewStack();
-        // The screens beneath Settings show the previous network, so Back
-        // finds them as it does in a reopened popup: each is rendered again
-        // when Back lands on it, and the stack is cut at the first one that
-        // cannot be rendered from saved state, such as Send or AddToken. It
-        // is cut at AddressToken too, unless that shows the native token: any
-        // other token there was picked on the previous network. Without a
-        // wallet the stack starts at Welcome, which that cut would drop, and
-        // Welcome shows nothing from a network. The cut comes before the
-        // switch so that the switch's save keeps it for a popup closed
-        // straight after.
-        if (state.hasWallet) {
-            const tokenView = state.viewStack.indexOf("address-token");
-            if (tokenView !== -1 && state.selectedToken !== "ETH") {
-                state.viewStack = state.viewStack.slice(0, tokenView);
-            }
-            state.viewStack = restorableStack(state.viewStack, "settings");
-        }
         const net = await onChainSwitch(newId);
+        if (!net) return;
         // Open pages are told by the background, as after a site's approved
         // switch request.
         notify({ type: "AUTISTMASK_NETWORK_CHANGED", chainId: net.chainId });
-        resetRenderedViews();
+        showNewNetwork();
-        // Settings itself, and the testnet banner above it, are brought up
-        // to date for the new network here.
-        markViewRendered("settings");
-        $("settings-rpc").value = state.rpcUrl;
-        $("settings-blockscout").value = state.blockscoutUrl;
-        renderTrackedTokens();
-        updateDebugBanner(state.currentView);
         showFlash("Switched to " + net.name + ".");
     });
 
@@ -484,4 +511,10 @@ function init(ctx) {
     });
 }
 
-module.exports = { init, show, renderSiteLists };
+module.exports = {
+    init,
+    show,
+    renderSiteLists,
+    cutViewStack,
+    showNewNetwork,
+};

src/shared/browserApi.js

@@ -224,6 +224,19 @@ function storageRemove(keys) {
     return Promise.resolve(storage.remove(keys));
 }
 
+/**
+ * Call `listener` after every write to `storage.local`, whether this page,
+ * another page or the background made it, with what the write changed, as the
+ * browser reports it: `{ [key]: { oldValue, newValue } }`.
+ *
+ * @param {function(Object): void} listener
+ */
+function onStorageChanged(listener) {
+    namespaceMember("storage").onChanged.addListener((changes, areaName) => {
+        if (areaName === "local") listener(changes);
+    });
+}
+
 /**
  * Run `fn` while holding the browser's lock called `name`
  * (`navigator.locks`), and settle as `fn` settles. Every page of the extension
@@ -385,6 +398,7 @@ module.exports = {
     getPlatformInfo,
     hasBrowserNamespace,
     notify,
+    onStorageChanged,
     runtimeApi,
     sendMessage,
     sessionStorageGet,

src/shared/chainSwitch.js

@@ -1,8 +1,18 @@
-// Consolidated chain-switch handler for the popup.
+// The popup's network switch.
 //
-// Every state change required when the active network changes is
+// A network switch reaches the popup's `state` in one of two ways:
-// performed here so that callers (settings UI, future chain additions) all go
+//
-// through a single code path.
+// - onChainSwitch() below makes the switch the user picks in Settings, with
+//   applyChainSwitchFields() (chainSwitchFields.js).
+// - followNetworkSwitch() in src/popup/index.js takes a switch the background
+//   or another popup page saved, from the stored record, with
+//   takeStoredNetwork() (state.js), which copies it with
+//   copyChainSwitchFields() (chainSwitchFields.js).
+//
+// Both change `state` inside a save, holding the lock, and both reset the
+// popup's own caches through clearPopupCaches(), so a reset added there
+// reaches both. A field applyChainSwitchFields() sets has to be copied by
+// copyChainSwitchFields() too.
 //
 // Adding a new chain (e.g. ETC) requires only a new entry in
 // networks.js — no per-caller wiring is needed.
@@ -20,22 +30,32 @@
 const { applyChainSwitchFields } = require("./chainSwitchFields");
 const { clearPrices } = require("./prices");
 
+// The popup's own caches a network switch resets. Prices are chain-specific
+// (testnet tokens are worthless, ETC has different pricing, etc.). In-memory
+// and per bundle, so this is the popup's own cache — the only context that
+// ever fills it.
+function clearPopupCaches() {
+    clearPrices();
+}
+
 // Switch the active chain and reset all chain-specific cached state.
-// Returns the network configuration object for the new chain.
+// Returns the network configuration object for the new chain, or null when
+// `state` already has that network once the save holds the lock, and nothing
+// is switched.
+//
+// `state` is switched inside the save that stores the switch, holding the
+// lock, so it is never switched while a follow of a switch saved elsewhere
+// waits for the lock (followNetworkSwitch() in src/popup/index.js): that
+// follow runs first, and this switch is made after it.
 async function onChainSwitch(newNetworkId) {
     const { state, saveState } = require("./state");
-
+    let net = null;
-    const net = applyChainSwitchFields(state, newNetworkId);
+    await saveState(() => {
-
+        if (state.networkId === newNetworkId) return false;
-    // --- price cache ---
+        net = applyChainSwitchFields(state, newNetworkId);
-    // Prices are chain-specific (testnet tokens are worthless,
+        clearPopupCaches();
-    // ETC has different pricing, etc.). In-memory and per bundle, so this is
+    });
-    // the popup's own cache — the only context that ever fills it.
-    clearPrices();
-
-    await saveState();
-
     return net;
 }
 
-module.exports = { onChainSwitch };
+module.exports = { onChainSwitch, clearPopupCaches };

src/shared/chainSwitchFields.js

@@ -7,7 +7,7 @@
 // the singleton and saves; the background applies it to the detached record of
 // its own read-modify-write (src/background/state.js).
 //
-// Everything here is synchronous and touches nothing but the object it is
+// Everything here is synchronous and touches nothing but the objects it is
 // given: no storage, no caches, no imports beyond the network table. That is
 // what makes it usable on a record that has been read fresh from storage
 // microseconds earlier and is about to be written back.
@@ -76,4 +76,33 @@ function applyChainSwitchFields(s, newNetworkId) {
     return net;
 }
 
-module.exports = { applyChainSwitchFields };
+// Give `s` every field applyChainSwitchFields() sets, as `switched` holds it:
+// the popup takes a switch the background saved from the stored record this
+// way, rather than performing it again (takeStoredNetwork() in
+// src/shared/state.js). Balances are taken by address, and an address
+// `switched` does not have keeps none.
+function copyChainSwitchFields(s, switched) {
+    s.networkEndpoints = switched.networkEndpoints;
+    s.networkTrackedTokens = switched.networkTrackedTokens;
+    s.trackedTokens = switched.trackedTokens;
+    s.networkId = switched.networkId;
+    s.rpcUrl = switched.rpcUrl;
+    s.blockscoutUrl = switched.blockscoutUrl;
+    s.lastBalanceRefresh = switched.lastBalanceRefresh;
+    s.tokenHolderCache = switched.tokenHolderCache;
+    s.fraudContracts = switched.fraudContracts;
+
+    const stored = new Map();
+    for (const wallet of switched.wallets) {
+        for (const addr of wallet.addresses) stored.set(addr.address, addr);
+    }
+    for (const wallet of s.wallets) {
+        for (const addr of wallet.addresses) {
+            const got = stored.get(addr.address);
+            addr.balance = got ? got.balance : "0";
+            addr.tokenBalances = got ? got.tokenBalances : [];
+        }
+    }
+}
+
+module.exports = { applyChainSwitchFields, copyChainSwitchFields };

src/shared/state.js

@@ -23,6 +23,7 @@
 // guarantee.
 
 const { networkById } = require("./networks");
+const { copyChainSwitchFields } = require("./chainSwitchFields");
 const {
     DEFAULT_STATE,
     PERSISTED_FIELDS,
@@ -125,8 +126,10 @@ function currentNetwork() {
 }
 
 // The persisted fields as this page held them when its last loadState()
-// finished, or when its last successful saveState() began. saveState() diffs
+// finished, or when its last successful saveState() began, with any network
-// the live state against this to find only the fields THIS page changed since.
+// switch saved elsewhere that this page has taken since (takeStoredNetwork()).
+// saveState() diffs the live state against this to find only the fields THIS
+// page changed since.
 //
 // Deep-cloned, not a reference: callers mutate persisted objects and arrays
 // in place (state.wallets.push(...)), and a reference baseline would mutate
@@ -466,7 +469,9 @@ function mergeNetworkEndpoints(base, ours, theirs) {
 // exists to remove, just delayed and confined to one page instead of two
 // (caught by tests/txStatus.test.js). A page's live picture of a field it
 // does not own goes on being whatever its last loadState() saw, same as
-// before this fix; only the persisted record is guaranteed current.
+// before this fix; only the persisted record is guaranteed current. The
+// network is the exception: the popup takes a switch another context saved
+// through `beforeWrite` (followNetworkSwitch() in src/popup/index.js).
 async function saveStateOnce(beforeWrite) {
     const result = await storageGet("autistmask");
     // The record in storage right now is about to be merged into and written
@@ -597,6 +602,17 @@ function saveState(beforeWrite) {
     return turn;
 }
 
+// Give this page the network switch held by `stored`, a record a save of this
+// page has just read (followNetworkSwitch() in src/popup/index.js calls this
+// from `beforeWrite`), in `state` and in `baseline` alike, as loadState() does
+// with a whole record. The switch is then not this page's own change, even when
+// that save fails to write: a later switch back to the previous network still
+// differs from `baseline`, and is stored.
+function takeStoredNetwork(stored) {
+    copyChainSwitchFields(rawState, stored);
+    copyChainSwitchFields(baseline, structuredClone(stored));
+}
+
 // Rejects with StateUnusableError for a stored record this build cannot make
 // sense of. Nothing is assigned and `loaded` stays false in that case, so a
 // caller that ignores the rejection gets StateNotLoadedError on the first
@@ -642,6 +658,7 @@ module.exports = {
     state,
     saveState,
     onSaveFailure,
+    takeStoredNetwork,
     loadState,
     currentAddress,
     currentNetwork,

src/shared/uniswap.js

@@ -1234,9 +1234,11 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         let inputToken = null;
         let inputAmount = null;
         let inputEstablished = false;
-        // Whether the user pays the V4 step that set the input side any of
+        // Whether the user pays the step that set the input side: a V2 or V3
-        // its input currency (see decodeV4Swap()). Only a V4 step can set the
+        // swap step with `payerIsUser` true, a V4 step the user pays some of
-        // input side with no amount, the one case in which this is read.
+        // its input currency (see decodeV4Swap()), or a WRAP_ETH, whose ETH
+        // comes from the transaction's value. A step paid from the router
+        // takes nothing from the sender.
         let inputPaidByUser = false;
         // The last PERMIT2_PERMIT this decoder read before a step set the
         // input side, or null (see permitStands after the loop).
@@ -1622,6 +1624,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                     if (s) {
                         if (!inputEstablished) {
                             setInputOnce(s.tokenIn, s.amountIn);
+                            inputPaidByUser = s.payerIsUser;
                         } else if (s.payerIsUser) {
                             addUserPaid(s.tokenIn, s.amountIn);
                         }
@@ -1645,6 +1648,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                     if (s) {
                         if (!inputEstablished) {
                             setInputOnce(s.tokenIn, s.amountIn);
+                            inputPaidByUser = s.payerIsUser;
                         } else if (s.payerIsUser) {
                             addUserPaid(s.tokenIn, s.amountIn);
                         }
@@ -1676,6 +1680,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                     if (s) {
                         if (!inputEstablished) {
                             setInputOnce(s.tokenIn, s.amountInMax);
+                            inputPaidByUser = s.payerIsUser;
                         } else if (s.payerIsUser) {
                             addUserPaid(s.tokenIn, s.amountInMax);
                         }
@@ -1771,10 +1776,13 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                 } else if (command === "WRAP_ETH") {
                     const w = decodeWrapEth(inputs[i]);
                     if (w) {
-                        setInputOnce(
+                        if (!inputEstablished) {
-                            "0x0000000000000000000000000000000000000000",
+                            setInputOnce(
-                            w.amount,
+                                "0x0000000000000000000000000000000000000000",
-                        );
+                                w.amount,
+                            );
+                            inputPaidByUser = true;
+                        }
                         addPayee(w.recipient);
                         // CONTRACT_BALANCE wraps all the router's ETH.
                         if (w.amount === CONTRACT_BALANCE) {
@@ -2041,6 +2049,11 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         // (see spentUnread()), or a token it does not know.
         const spentFromSender = [];
         let total = null;
+        // The takes from the sender that `total` adds up, each a quantity, as
+        // { token, amount }. When there is no Amount line, each gets lines of
+        // its own (see below). The amount of a step that set the input side
+        // and is paid from the router counts in `total` but is not among them.
+        const inTotal = [];
         // Whether the step that set the input side counts as a take from the
         // sender, which may get lines of its own. The amount it stated counts
         // whoever pays it. Stating none, it counts only when the user pays it
@@ -2053,6 +2066,9 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         let firstTakeUnstated = null;
         if (!permitStands || sameAddress(inputToken, permit.token)) {
             total = inputAmount;
+            if (typeof inputAmount === "bigint" && inputPaidByUser) {
+                inTotal.push({ token: inputToken, amount: inputAmount });
+            }
             if (hasFirstTake && !present(inputAmount)) {
                 firstTakeUnstated = { token: inputToken, amount: null };
             }
@@ -2071,6 +2087,7 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                 typeof t.amount === "bigint"
             ) {
                 total += t.amount;
+                inTotal.push(t);
                 continue;
             }
             spentFromSender.push(t);
@@ -2202,7 +2219,9 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
         // A null token in `spentFromSender`, a step this decoder did not read
         // or a token it does not know, and one in `permits`, a permit or
         // batch it could not read, leave no Amount figure, which may then be
-        // too low.
+        // too low. With no Amount line, each take the total adds up gets
+        // lines of its own, first, so that every amount this decoder read is
+        // shown.
         if (
             present(inputAmount) &&
             spentFromSender.every((s) => present(s.token)) &&
@@ -2214,6 +2233,8 @@ function decode(data, toAddress, chainId, sources, fromAddress) {
                 value: amount.display,
                 rawValue: amount.raw,
             });
+        } else {
+            spentFromSender.unshift(...inTotal);
         }
 
         // What steps take from the sender beyond the Amount line, in the shape

tests/balanceRefreshNetworkSwitch.test.js

@@ -97,9 +97,9 @@ test("a refresh that returns after a switch in Settings writes nothing, and the
     );
 });
 
-// The stored record still holds Ethereum Mainnet while the refresh's save reads
+// The switch is made only once the refresh's save, holding the lock, has
-// it, so only this page's own network shows the switch.
+// written Ethereum Mainnet's balances, and the switch then clears them.
-test("a refresh whose save is reading the stored record when the user switches in Settings writes nothing", async () => {
+test("a refresh whose save is reading the stored record when the user switches in Settings leaves none of its balances stored", async () => {
     const page = await bootPopup(unversionedValidProfile());
     expect(page.pageErrors).toEqual([]);
     const { state } = require("../src/shared/state");
@@ -145,7 +145,8 @@ test("a refresh that returns after the background switched the network writes no
 
     const refresh = await holdRefresh(page);
     // The background writes the switch to Sepolia, as its updateState() does
-    // once the user approves a site's request. This page is not told.
+    // once the user approves a site's request. This page is not told of it
+    // yet.
     const record = page.storage.read("autistmask");
     applyChainSwitchFields(record, "sepolia");
     page.storage.write("autistmask", record);

tests/chainSwitchGate.test.js

@@ -446,7 +446,10 @@ describe("switching the network in Settings tells every open tab", () => {
         global.chrome.runtime.sendMessage = (msg) => {
             bg.send(msg, POPUP);
         };
-        await require("../src/shared/state").loadState();
+        const { state, loadState } = require("../src/shared/state");
+        await loadState();
+        // Set by showView(), which is mocked above.
+        state.currentView = "settings";
         require("../src/popup/views/settings").init({
             pageClosed: new AbortController().signal,
         });

tests/e2e/firefox/run.js

@@ -867,6 +867,14 @@ step(
             "the page was not told of the approved switch: " +
                 JSON.stringify(events),
         );
+        // The popup, open all along, shows the new network
+        // (https://git.eeqj.de/sneak/AutistMask/issues/650).
+        await d.switchToWindow(env.popupWindow);
+        await d.waitFor(
+            "the open popup to show the testnet banner",
+            `const banner = document.getElementById("debug-banner");
+             return banner !== null && banner.textContent === "[TESTNET]";`,
+        );
 
         await openNetworkPrompt(env, "switch-restore", sepolia, mainnet);
         await d.click("#btn-approve-network");
@@ -881,6 +889,10 @@ step(
             isDeepStrictEqual(await storedNetwork(env), before),
             "switching back did not restore the mainnet network and endpoints",
         );
+        await d.waitFor(
+            "the open popup to drop the testnet banner",
+            `return document.getElementById("debug-banner") === null;`,
+        );
         await d.switchToWindow(env.dappWindow);
     },
 );

tests/e2e/run.js

@@ -4865,6 +4865,12 @@ test("a site's network switch changes nothing until the user approves it (#408)"
         "the page was not told of the approved switch: " +
             JSON.stringify(events),
     );
+    // The popup, open all along, shows the new network
+    // (https://git.eeqj.de/sneak/AutistMask/issues/650).
+    await env.page.waitForFunction(() => {
+        const banner = document.getElementById("debug-banner");
+        return banner !== null && banner.textContent === "[TESTNET]";
+    });
 
     const restored = await openNetworkPrompt(
         env,
@@ -4886,6 +4892,9 @@ test("a site's network switch changes nothing until the user approves it (#408)"
         isDeepStrictEqual(await storedNetwork(env.page), before),
         "switching back did not restore the mainnet network and endpoints",
     );
+    await env.page.waitForFunction(
+        () => document.getElementById("debug-banner") === null,
+    );
 });
 
 // Switching the network in Settings tells the page too, as an approved site

tests/popupFollowsNetworkSwitch.test.js

@@ -0,0 +1,300 @@
+// An open popup follows a network switch the background saves once the user
+// approves a site's request: it takes the new network from the stored record
+// and draws the screen it is on for it, as a switch in Settings does
+// (https://git.eeqj.de/sneak/AutistMask/issues/650). Driven through the real
+// popup over a stored profile on Ethereum Mainnet. The background's write is
+// the storage stub's set, which the stub reports to the page as the browser
+// does.
+
+const {
+    bootPopup,
+    cleanupPopup,
+    unversionedValidProfile,
+    TOKEN_ADDRESS,
+} = require("./support/popupBoot");
+const { makeStorageStub } = require("./support/storageStub");
+const {
+    applyChainSwitchFields,
+    copyChainSwitchFields,
+} = require("../src/shared/chainSwitchFields");
+const { NETWORKS } = require("../src/shared/networks");
+const { STATE_SCHEMA_VERSION } = require("../src/shared/stateSchema");
+
+afterEach(() => {
+    cleanupPopup();
+});
+
+const SEPOLIA_TOKEN = {
+    address: TOKEN_ADDRESS,
+    symbol: "TST",
+    decimals: 18,
+    name: "Test Token",
+};
+const MAINNET_TOKEN = {
+    address: "0x6B175474E89094C44Da98b954EedeAC495271d0F",
+    symbol: "DAI",
+    decimals: 18,
+    name: "Dai Stablecoin",
+};
+
+// A profile on Ethereum Mainnet that reopens the popup onto AddressDetail,
+// with DAI tracked there and TST tracked on Sepolia.
+function profileOnAddress() {
+    return unversionedValidProfile({
+        currentView: "address",
+        viewStack: ["main"],
+        selectedWallet: 0,
+        selectedAddress: 0,
+        trackedTokens: [MAINNET_TOKEN],
+        networkTrackedTokens: { sepolia: [SEPOLIA_TOKEN] },
+    });
+}
+
+// The popup reopened onto it.
+function bootOnAddress() {
+    return bootPopup(profileOnAddress());
+}
+
+// The background saves a switch to `networkId`, as its updateState() does
+// once the user approves a site's request.
+async function backgroundSwitch(page, networkId) {
+    const record = page.storage.read("autistmask");
+    applyChainSwitchFields(record, networkId);
+    await page.storage.local.set({ autistmask: record });
+    await page.settle();
+    await page.settle();
+}
+
+test("the popup open on AddressDetail shows the new network and its balances", async () => {
+    const page = await bootOnAddress();
+    expect(page.pageErrors).toEqual([]);
+    expect(page.visibleViews()).toEqual(["address"]);
+    expect(page.node("address-balances").innerHTML).toContain("DAI");
+    expect(page.node("debug-banner")).toBeNull();
+
+    await backgroundSwitch(page, "sepolia");
+
+    const { state } = require("../src/shared/state");
+    expect(state.networkId).toBe("sepolia");
+    expect(state.rpcUrl).toBe(NETWORKS.sepolia.defaultRpcUrl);
+    expect(page.visibleViews()).toEqual(["address"]);
+    const balances = page.node("address-balances").innerHTML;
+    expect(balances).toContain("TST");
+    expect(balances).toContain("SepoliaETH");
+    expect(balances).not.toContain("DAI");
+    expect(page.text("debug-banner")).toBe("[TESTNET]");
+
+    // Its next refresh runs on Sepolia, and what it fetched is stored.
+    await page.tick();
+    const { refreshBalances } = require("../src/shared/balances");
+    expect(refreshBalances.mock.lastCall[4]).toBe("sepolia");
+    const stored = page.storage.read("autistmask");
+    expect(stored.networkId).toBe("sepolia");
+    expect(stored.lastBalanceRefresh).toBeGreaterThan(0);
+});
+
+test("the popup open on Settings shows the new network, and Back draws the screen beneath for it", async () => {
+    const page = await bootOnAddress();
+    await page.click("btn-settings");
+    expect(page.visibleViews()).toEqual(["settings"]);
+
+    await backgroundSwitch(page, "sepolia");
+
+    expect(page.visibleViews()).toEqual(["settings"]);
+    expect(page.value("settings-network")).toBe("sepolia");
+    expect(page.value("settings-rpc")).toBe(NETWORKS.sepolia.defaultRpcUrl);
+    expect(page.node("settings-tracked-tokens").innerHTML).toContain("TST");
+    expect(page.text("debug-banner")).toBe("[TESTNET]");
+
+    await page.click("btn-settings-back");
+    expect(page.visibleViews()).toEqual(["address"]);
+    expect(page.node("address-balances").innerHTML).not.toContain("DAI");
+});
+
+// Neither can be drawn again for the new network: Send cannot be rendered from
+// saved state, and DAI was picked on Ethereum Mainnet, where alone it is
+// tracked. A reopened popup goes to Home in their place.
+test.each([
+    ["Send", (page) => page.click("btn-send")],
+    [
+        "AddressToken for DAI",
+        async (page) => {
+            const { state } = require("../src/shared/state");
+            state.selectedToken = MAINNET_TOKEN.address;
+            require("../src/popup/views/helpers").pushCurrentView();
+            require("../src/popup/views/addressToken").show();
+            await page.settle();
+        },
+    ],
+])("the popup open on %s goes to Home", async (_view, open) => {
+    const page = await bootOnAddress();
+    await open(page);
+    expect(page.visibleViews()).not.toEqual(["address"]);
+
+    await backgroundSwitch(page, "sepolia");
+
+    expect(page.visibleViews()).toEqual(["main"]);
+    expect(page.text("total-value")).toBe("0.0000 SepoliaETH");
+});
+
+// The report of the switch's own save names the network the page already has.
+test("a switch in Settings is not taken a second time when its save is reported", async () => {
+    const page = await bootOnAddress();
+    await page.click("btn-settings");
+    const { get, set } = page.storage.local;
+    const reads = get.mock.calls.length;
+    const writes = set.mock.calls.length;
+
+    const select = page.node("settings-network");
+    select.value = "sepolia";
+    for (const fn of select.listeners.change) await fn();
+    await page.settle();
+    await page.settle();
+
+    expect(get).toHaveBeenCalledTimes(reads + 1);
+    expect(set).toHaveBeenCalledTimes(writes + 1);
+    expect(page.text("flash-msg")).toBe("Switched to Sepolia Testnet.");
+});
+
+// The background saves the switch once the popup has read the stored record
+// and before it listens for changes to it, so the browser tells the page
+// nothing of it. Nor is any later write reported here: Chrome reports none
+// that leaves the record as it was, such as the popup's own save at start-up.
+test("a switch saved while the popup opens, before it listens for one, is followed", async () => {
+    const storage = makeStorageStub({ autistmask: profileOnAddress() });
+    storage.onChanged = { addListener: () => {} };
+    const read = storage.local.get.getMockImplementation();
+    storage.local.get.mockImplementationOnce(async (key) => {
+        const loaded = await read(key);
+        const record = storage.read("autistmask");
+        applyChainSwitchFields(record, "sepolia");
+        storage.write("autistmask", record);
+        return loaded;
+    });
+    const page = await bootPopup(undefined, { storage });
+    await page.settle();
+
+    const { state } = require("../src/shared/state");
+    expect(page.pageErrors).toEqual([]);
+    expect(state.networkId).toBe("sepolia");
+    expect(page.visibleViews()).toEqual(["address"]);
+    expect(page.node("address-balances").innerHTML).toContain("SepoliaETH");
+    expect(page.text("debug-banner")).toBe("[TESTNET]");
+});
+
+// While the popup's follow of the background's switch to Sepolia waits for the
+// lock, the user picks Sepolia in Settings and then Ethereum Mainnet again. The
+// last pick is the network stored, and the last one sites are told of.
+test("a switch in Settings made while a follow waits for the lock is not overwritten by it", async () => {
+    const page = await bootOnAddress();
+    await page.click("btn-settings");
+
+    // Another write holds the lock, so every save of the page waits for it.
+    let releaseLock;
+    const lockHeld = navigator.locks.request(
+        "autistmask",
+        () =>
+            new Promise((resolve) => {
+                releaseLock = resolve;
+            }),
+    );
+    await backgroundSwitch(page, "sepolia");
+    const select = page.node("settings-network");
+    const picks = [];
+    for (const networkId of ["sepolia", "mainnet"]) {
+        select.value = networkId;
+        for (const fn of select.listeners.change) picks.push(fn());
+    }
+    releaseLock();
+    await lockHeld;
+    await Promise.all(picks);
+    await page.settle();
+
+    const { state } = require("../src/shared/state");
+    expect(state.networkId).toBe("mainnet");
+    expect(page.storage.read("autistmask").networkId).toBe("mainnet");
+    expect(page.value("settings-network")).toBe("mainnet");
+    const told = globalThis.chrome.runtime.sendMessage.mock.calls
+        .map(([message]) => message)
+        .filter((message) => message.type === "AUTISTMASK_NETWORK_CHANGED");
+    expect(told.at(-1).chainId).toBe(NETWORKS.mainnet.chainId);
+});
+
+// The popup follows the background's switch to Sepolia, but its own write in
+// that save fails. The user then picks Ethereum Mainnet in Settings, the
+// network the popup was on before: that switch is stored, and only then
+// flashed and sent to sites.
+test("a switch back in Settings after a follow whose write failed is stored", async () => {
+    const page = await bootOnAddress();
+    await page.click("btn-settings");
+    const { set } = page.storage.local;
+    const write = set.getMockImplementation();
+    // The background's write lands; the next, the follow's, fails.
+    set.mockImplementationOnce(write).mockRejectedValueOnce(
+        new Error("quota exceeded"),
+    );
+    await backgroundSwitch(page, "sepolia");
+    const { state } = require("../src/shared/state");
+    expect(state.networkId).toBe("sepolia");
+
+    const select = page.node("settings-network");
+    select.value = "mainnet";
+    for (const fn of select.listeners.change) await fn();
+    await page.settle();
+
+    const stored = page.storage.read("autistmask");
+    expect(stored.networkId).toBe("mainnet");
+    expect(stored.rpcUrl).toBe(NETWORKS.mainnet.defaultRpcUrl);
+    expect(stored.trackedTokens).toEqual([MAINNET_TOKEN]);
+    expect(page.text("flash-msg")).toBe("Switched to Ethereum Mainnet.");
+    const told = globalThis.chrome.runtime.sendMessage.mock.calls
+        .map(([message]) => message)
+        .filter((message) => message.type === "AUTISTMASK_NETWORK_CHANGED");
+    expect(told.at(-1).chainId).toBe(NETWORKS.mainnet.chainId);
+});
+
+// Such as one a newer build wrote, which this build cannot read. Nothing reads
+// or writes the stored record for it: the popup's next save finds it, as
+// before.
+test("a record that names no network is not followed", async () => {
+    const page = await bootOnAddress();
+    const { get, set } = page.storage.local;
+    const reads = get.mock.calls.length;
+
+    await set({
+        autistmask: {
+            schemaVersion: STATE_SCHEMA_VERSION + 1,
+            wallets: [{ type: "hd", name: "Main", addresses: [] }],
+        },
+    });
+    await page.settle();
+
+    expect(get).toHaveBeenCalledTimes(reads);
+    expect(page.visibleViews()).toEqual(["address"]);
+});
+
+// A record that takes the switch from the switched record ends up as that
+// record, balances the background fetched since included.
+test("copyChainSwitchFields() takes every field applyChainSwitchFields() sets", () => {
+    const before = unversionedValidProfile({
+        trackedTokens: [MAINNET_TOKEN],
+        networkTrackedTokens: { sepolia: [SEPOLIA_TOKEN] },
+        networkEndpoints: {
+            sepolia: {
+                rpcUrl: "http://127.0.0.1:8545",
+                blockscoutUrl: "http://127.0.0.1:4000/api/v2",
+            },
+        },
+        lastBalanceRefresh: 1,
+        tokenHolderCache: { [MAINNET_TOKEN.address]: 5000 },
+        fraudContracts: ["0x1111111111111111111111111111111111111111"],
+    });
+    const switched = structuredClone(before);
+    applyChainSwitchFields(switched, "sepolia");
+    switched.wallets[0].addresses[0].balance = "2.0";
+
+    const follower = structuredClone(before);
+    copyChainSwitchFields(follower, switched);
+
+    expect(follower).toEqual(switched);
+});

tests/support/popupBoot.js

@@ -311,7 +311,7 @@ async function bootPopup(stored, options) {
     const windowListeners = {};
 
     globalThis.chrome = {
-        storage: { local: storage.local },
+        storage: { local: storage.local, onChanged: storage.onChanged },
         runtime: {
             sendMessage: jest.fn(async () => ({})),
             getURL: (p) => "chrome-extension://autistmask/" + p,

tests/support/storageStub.js

@@ -18,7 +18,9 @@
 // a storage stub by hand.
 
 // One storage area: get, set and remove over its own store, cloning both ways.
-function makeArea(store, tick) {
+// `changed` is handed what each set or remove changed, in the shape
+// storage.onChanged reports it.
+function makeArea(store, tick, changed) {
     const get = jest.fn(async (key) => {
         tick();
         if (key === undefined || key === null) return structuredClone(store);
@@ -34,14 +36,25 @@ function makeArea(store, tick) {
 
     const set = jest.fn(async (items) => {
         tick();
+        const changes = {};
         for (const k of Object.keys(items)) {
+            changes[k] = structuredClone({
+                oldValue: store[k],
+                newValue: items[k],
+            });
             store[k] = structuredClone(items[k]);
         }
+        changed(changes);
     });
 
     const remove = jest.fn(async (key) => {
         tick();
-        for (const k of Array.isArray(key) ? key : [key]) delete store[k];
+        const changes = {};
+        for (const k of Array.isArray(key) ? key : [key]) {
+            changes[k] = { oldValue: store[k] };
+            delete store[k];
+        }
+        changed(changes);
     });
 
     return { get, set, remove };
@@ -54,12 +67,22 @@ function makeArea(store, tick) {
 function makeStorageStub(initial, onOp) {
     const store = initial ? structuredClone(initial) : {};
     const tick = onOp || (() => {});
-    const local = makeArea(store, tick);
+    // storage.onChanged: after a set or remove has finished, every listener is
+    // called with what it changed and the area's name, as the browser calls
+    // them for a write by any page or the background.
+    const listeners = [];
+    const announce = (areaName) => (changes) => {
+        Promise.resolve().then(() => {
+            for (const fn of listeners) fn(structuredClone(changes), areaName);
+        });
+    };
+    const local = makeArea(store, tick, announce("local"));
 
     return {
         // Drop this straight in as chrome.storage.
         local,
-        session: makeArea({}, tick),
+        session: makeArea({}, tick, announce("session")),
+        onChanged: { addListener: (fn) => listeners.push(fn) },
         get: local.get,
         set: local.set,
         remove: local.remove,
@@ -71,7 +94,9 @@ function makeStorageStub(initial, onOp) {
                 ? structuredClone(store)
                 : structuredClone(store[key]),
         // Seed or replace a record without going through the module under
-        // test — for standing in as "another page wrote this".
+        // test — for standing in as "another page wrote this". Nothing is
+        // announced to storage.onChanged, so it also stands in for the time
+        // before the browser tells this page of such a write.
         write: (key, value) => {
             store[key] = structuredClone(value);
         },

tests/trackedTokensPerNetwork.test.js

@@ -161,6 +161,7 @@ test("a token added by contract address on Sepolia is tracked on Sepolia only",
     );
     expect(stored().trackedTokens).toEqual([SEPOLIA_TOKEN]);
 
+    await boot.click("btn-settings");
     await chooseNetwork(boot, "mainnet");
     expect(stored().networkId).toBe("mainnet");
     expect(stored().trackedTokens).toEqual([MAINNET_TOKEN]);

tests/uniswap.test.js

@@ -1447,6 +1447,20 @@ describe("uniswap decoder", () => {
             USDT_ADDR,
             USDC_ADDR,
         ]);
+        // The lines of its 600 USDT when there is no Amount line.
+        // https://git.eeqj.de/sneak/AutistMask/issues/659 — on next at
+        // 5f2b606 no line gave the 600 USDT then.
+        const USDT_600_GROUP = [
+            ["Moved from the sender", "600.0000 USDT"],
+            ["Token moved", "USDT (" + USDT_ADDR + ")"],
+            ["Moved to", "The swap step that spends it"],
+        ];
+        // The same for a step's 400 USDT.
+        const USDT_400_GROUP = [
+            ["Moved from the sender", "400.0000 USDT"],
+            ["Token moved", "USDT (" + USDT_ADDR + ")"],
+            ["Moved to", "The swap step that spends it"],
+        ];
         // V4 SETTLE of `amount` of `currency`, and TAKE of `amount` of
         // `currency` to `recipient`.
         const settle = (currency, amount, payerIsUser) =>
@@ -1673,6 +1687,7 @@ describe("uniswap decoder", () => {
                     encodeV4SettleAll(USDT_ADDR, USDT_400),
                 ],
                 lines: [
+                    ...USDT_600_GROUP,
                     ["Moved from the sender", UNDECODED],
                     ["Token moved", "USDT (" + USDT_ADDR + ")"],
                     ["Moved to", "The swap step that spends it"],
@@ -1693,6 +1708,7 @@ describe("uniswap decoder", () => {
                     encodeV4TakeAll(USDC_ADDR, 0n),
                 ],
                 lines: [
+                    ...USDT_600_GROUP,
                     ["Moved from the sender", UNDECODED],
                     ["Token moved", "USDT (" + USDT_ADDR + ")"],
                     ["Moved to", "The swap step that spends it"],
@@ -1824,6 +1840,8 @@ describe("uniswap decoder", () => {
 
         // A step that may take from the sender what the decoder did not read
         // leaves no Amount figure, which may be too low, and one line says so.
+        // The amount of the step that set the input side then gets lines of
+        // its own.
         const UNREAD_SWAP = V4_SWAP_ACTION_SHAPES[0].newer;
         test.each([
             {
@@ -1871,6 +1889,7 @@ describe("uniswap decoder", () => {
                 [V3_600, encodeV4Swap(new Uint8Array(actions), params)],
             );
             expect(linesBetweenTokens(result)).toEqual([
+                ...USDT_600_GROUP,
                 ["Moved from the sender", UNDECODED],
             ]);
         });
@@ -1893,6 +1912,9 @@ describe("uniswap decoder", () => {
                         ],
                     ),
                 ],
+                // Nothing read says the user pays this step, so its 400 USDT
+                // gets no lines of its own.
+                first: [],
             },
             {
                 kind: "a V3 step of 600 USDT, then a V4 step whose input cannot be read",
@@ -1963,9 +1985,27 @@ describe("uniswap decoder", () => {
                     ),
                 ],
             },
-        ])("$kind", ({ commands, inputs }) => {
+            // Each take the total would add up gets lines of its own.
+            {
+                kind: "a V3 step of 600 USDT and a V2 step of 400 USDT the user pays for, then a PERMIT2_TRANSFER_FROM_BATCH",
+                commands: [0x00, 0x08, 0x0d],
+                inputs: [
+                    V3_600,
+                    encodeV2SwapExactIn(USER_ADDR, USDT_400, 390000000n, [
+                        USDT_ADDR,
+                        USDC_ADDR,
+                    ]),
+                    coder.encode(
+                        ["tuple(address,address,uint160,address)[]"],
+                        [[[USER_ADDR, OTHER_ADDR, USDT_400, USDT_ADDR]]],
+                    ),
+                ],
+                first: [...USDT_600_GROUP, ...USDT_400_GROUP],
+            },
+        ])("$kind", ({ commands, inputs, first = USDT_600_GROUP }) => {
             const result = decodeSteps(commands, inputs);
             expect(linesBetweenTokens(result)).toEqual([
+                ...first,
                 ["Moved from the sender", UNDECODED],
             ]);
         });
@@ -1984,6 +2024,7 @@ describe("uniswap decoder", () => {
                 commands: [0x00, 0x08, 0x21],
                 inputs: [V3_600, V2_DAI_400, SUB_PLAN],
                 lines: [
+                    ...USDT_600_GROUP,
                     ["Moved from the sender", "400.0000 DAI"],
                     ["Token moved", "DAI (" + DAI_ADDR + ")"],
                     ["Moved to", "The swap step that spends it"],
@@ -1995,6 +2036,7 @@ describe("uniswap decoder", () => {
                 commands: [0x21, 0x00, 0x08],
                 inputs: [SUB_PLAN, V3_600, V2_DAI_400],
                 lines: [
+                    ...USDT_600_GROUP,
                     ["Moved from the sender", UNDECODED],
                     ["Moved from the sender", "400.0000 DAI"],
                     ["Token moved", "DAI (" + DAI_ADDR + ")"],
@@ -2013,6 +2055,7 @@ describe("uniswap decoder", () => {
                     SUB_PLAN,
                 ],
                 lines: [
+                    ...USDT_600_GROUP,
                     ["Moved from the sender", UNDECODED],
                     ["Moved from the sender", "400.0000 DAI"],
                     ["Token moved", "DAI (" + DAI_ADDR + ")"],
@@ -2290,6 +2333,103 @@ describe("uniswap decoder", () => {
             expect(linesBetweenTokens(result)).toEqual(lines);
         });
 
+        // A step that sets the input side and is paid from the router takes
+        // nothing from the sender, so with no Amount line its amount gets no
+        // lines of its own: in each route below the sender's 600 USDT moves
+        // into the router first, and such lines would say it left twice.
+        const INTO_ROUTER_600 = permit2TransferFrom(
+            USDT_ADDR,
+            ROUTER_ADDR,
+            USDT_600,
+        );
+        const V3_600_FROM_ROUTER = coder.encode(
+            ["address", "uint256", "uint256", "bytes", "bool"],
+            [
+                USER_ADDR,
+                USDT_600,
+                590000000n,
+                encodeV3Path([USDT_ADDR, USDC_ADDR]),
+                false,
+            ],
+        );
+        const TRANSFER_FROM_BATCH = coder.encode(
+            ["tuple(address,address,uint160,address)[]"],
+            [[[USER_ADDR, OTHER_ADDR, USDT_400, USDT_ADDR]]],
+        );
+        test.each([
+            {
+                kind: "a PERMIT2_TRANSFER_FROM of 600 USDT into the router, a V3 exact-in of 600 USDT paid from the router, then a PERMIT2_TRANSFER_FROM_BATCH",
+                commands: [0x02, 0x00, 0x0d],
+                inputs: [
+                    INTO_ROUTER_600,
+                    V3_600_FROM_ROUTER,
+                    TRANSFER_FROM_BATCH,
+                ],
+                lines: [["Moved from the sender", UNDECODED]],
+            },
+            {
+                kind: "a PERMIT2_PERMIT that cannot be read, a PERMIT2_TRANSFER_FROM of 600 USDT into the router, then a V3 exact-in of 600 USDT paid from the router",
+                commands: [0x0a, 0x02, 0x00],
+                inputs: [
+                    dirtyWord(
+                        encodePermit2(USDT_ADDR, 5000000000n, ROUTER_ADDR),
+                        0,
+                    ),
+                    INTO_ROUTER_600,
+                    V3_600_FROM_ROUTER,
+                ],
+                lines: [["Permit2 allowance", UNDECODED]],
+            },
+            {
+                kind: "a PERMIT2_TRANSFER_FROM of 600 USDT into the router, a V4 step swapping 600 USDT whose SETTLE the router pays, then a PERMIT2_TRANSFER_FROM_BATCH",
+                commands: [0x02, 0x10, 0x0d],
+                inputs: [
+                    INTO_ROUTER_600,
+                    encodeV4Swap(
+                        new Uint8Array([
+                            V4_SWAP_EXACT_IN_SINGLE_ID,
+                            V4_SETTLE_ID,
+                            V4_TAKE_ALL_ID,
+                        ]),
+                        [
+                            encodeV4ExactInSingle(
+                                USDT_ADDR,
+                                USDC_ADDR,
+                                USDT_600,
+                                590000000n,
+                            ),
+                            settle(USDT_ADDR, USDT_600, false),
+                            encodeV4TakeAll(USDC_ADDR, 0n),
+                        ],
+                    ),
+                    TRANSFER_FROM_BATCH,
+                ],
+                lines: [["Moved from the sender", UNDECODED]],
+            },
+            {
+                kind: "a PERMIT2_TRANSFER_FROM of 600 USDT into the router, a V2 exact-in of CONTRACT_BALANCE paid from the router, then an EXECUTE_SUB_PLAN",
+                commands: [0x02, 0x08, 0x21],
+                inputs: [
+                    INTO_ROUTER_600,
+                    coder.encode(
+                        ["address", "uint256", "uint256", "address[]", "bool"],
+                        [
+                            USER_ADDR,
+                            2n ** 255n, // CONTRACT_BALANCE
+                            590000000n,
+                            [USDT_ADDR, USDC_ADDR],
+                            false,
+                        ],
+                    ),
+                    SUB_PLAN,
+                ],
+                lines: [["Moved from the sender", UNDECODED]],
+            },
+        ])("$kind", ({ commands, inputs, lines }) => {
+            const result = decodeSteps(commands, inputs);
+            expect(linesBetweenTokens(result)).toEqual(lines);
+        });
+
         // A V3_SWAP_EXACT_OUT the user pays for, of at most `amountInMax`
         // USDT for USDC.
         const v3ExactOut = (amountInMax) =>
@@ -2635,10 +2775,35 @@ describe("uniswap decoder", () => {
                         [input, V3_600],
                     );
                     expect(linesBetweenTokens(result)).toEqual([
+                        ...USDT_600_GROUP,
                         ["Permit2 allowance", UNDECODED],
                     ]);
                 },
             );
+
+            // https://git.eeqj.de/sneak/AutistMask/issues/659 — on next at
+            // 5f2b606 only the 400 DAI was shown.
+            test("a PERMIT2_PERMIT that cannot be read, then a V3 exact-in of 600 USDT and a V2 exact-in of 400 DAI, both paid by the user, shows both amounts", () => {
+                const result = decodeSteps(
+                    [0x0a, 0x00, 0x08],
+                    [
+                        dirtyWord(
+                            encodePermit2(USDT_ADDR, USDT_5000, ROUTER_ADDR),
+                            0,
+                        ),
+                        V3_600,
+                        encodeV2SwapExactIn(USER_ADDR, DAI_400, 390000000n, [
+                            DAI_ADDR,
+                            USDC_ADDR,
+                        ]),
+                    ],
+                );
+                expect(linesBetweenTokens(result)).toEqual([
+                    ...USDT_600_GROUP,
+                    ...DAI_GROUP,
+                    ["Permit2 allowance", UNDECODED],
+                ]);
+            });
         });
 
         // A V3_SWAP_EXACT_OUT whose path is shorter than one token cannot be
@@ -2650,7 +2815,12 @@ describe("uniswap decoder", () => {
                 [USER_ADDR, 390000000n, USDT_400, "0x", true],
             );
             const result = decodeSteps([0x00, 0x01], [V3_600, unreadable]);
+            // With a V3 exact-out step, the 600 USDT reads as a maximum, as
+            // the Amount line would.
             expect(linesBetweenTokens(result)).toEqual([
+                ["Moved from the sender", "Up to 600.0000 USDT"],
+                ["Token moved", "USDT (" + USDT_ADDR + ")"],
+                ["Moved to", "The swap step that spends it"],
                 ["Moved from the sender", UNDECODED],
             ]);
             expect(detail(result, "Paid to").value).toBe(UNDECODED);
@@ -2701,6 +2871,9 @@ describe("uniswap decoder", () => {
                 ],
             );
             expect(linesBetweenTokens(result)).toEqual([
+                ["Moved from the sender", "Up to 0.5000 WETH"],
+                ["Token moved", "WETH (" + WETH_ADDR + ")"],
+                ["Moved to", "The swap step that spends it"],
                 ["Moved from the sender", UNDECODED],
                 ...permitLines("1.0000 WETH", WETH_ADDR, "WETH", ROUTER_ADDR),
             ]);
@@ -2856,14 +3029,15 @@ describe("uniswap decoder", () => {
         );
 
         // The V4 exact-out route above the other way round, where the later
-        // take's unknown amount leaves no figure at all, and other ways the
+        // take's unknown amount leaves no Amount figure and the 400 USDT gets
-        // step that sets the input side states no amount.
+        // lines of its own, and other ways the step that sets the input side
+        // states no amount.
         test.each([
             {
                 kind: "a V2 exact-out of at most 400 USDT, then a V4 exact-out step of at most 600 USDT",
                 commands: [0x09, 0x10],
                 inputs: [V2_EXACT_OUT_400, V4_EXACT_OUT_600],
-                lines: UNKNOWN_USDT,
+                lines: [...UP_TO_400_USDT, ...UNKNOWN_USDT],
             },
             {
                 kind: "a PERMIT2_PERMIT of 1 USDT to another spender, a V4 exact-out step of at most 600 USDT, then a V2 exact-out of at most 400 USDT",

tests/uniswapRecipient.test.js

@@ -1439,8 +1439,17 @@ describe("any token left in the router is not received", () => {
             "Token In",
             // A later step whose SETTLE or SETTLE_ALL the decoder cannot read
             // may take anything from the sender: one line says so, in place
-            // of the Amount line (https://git.eeqj.de/sneak/AutistMask/issues/625).
+            // of the Amount line (https://git.eeqj.de/sneak/AutistMask/issues/625),
-            unread ? "Moved from the sender" : "Amount",
+            // after the lines the WRAP_ETH's 1 ETH then gets
+            // (https://git.eeqj.de/sneak/AutistMask/issues/659).
+            ...(unread
+                ? [
+                      "Moved from the sender",
+                      "Token moved",
+                      "Moved to",
+                      "Moved from the sender",
+                  ]
+                : ["Amount"]),
             // A later swap step the user pays for spends `spent` of a token
             // other than Token In.
             ...(spent
@@ -1457,9 +1466,11 @@ describe("any token left in the router is not received", () => {
             expect(detail(result, "Moved from the sender").value).toBe(spent);
         }
         if (unread) {
-            expect(detail(result, "Moved from the sender").value).toBe(
+            expect(
-                UNDECODED,
+                result.details
-            );
+                    .filter((d) => d.label === "Moved from the sender")
+                    .map((d) => d.value),
+            ).toEqual(["1.0000 ETH", UNDECODED]);
         }
         expect(paidTo(result)).toEqual([STAYS_IN_ROUTER]);
         expect(detail(result, "Token moved into the router")).toEqual(left);