fix: the bundled token list names tokens on Ethereum Mainnet only (closes #632)

bundledToken(address, chainId) in tokenList.js answers only for Ethereum
Mainnet's chain id. Every reader of TOKEN_BY_ADDRESS now goes through it,
with the chain id of the transaction, balance or history entry it draws.
The token sources the screens build carry that chain id. The Uniswap
decoder sets the transaction's chain id on them. fetchTokenBalances()
takes the chain id of the network it asks about.

isSpoofedSymbol() takes the chain id of the token's network. It checks the
bundled list's symbols only on Ethereum Mainnet. The native asset's labels
stay reserved on every network.

Eighteen existing tests and three shared test helpers read the bundled
list without naming a network. Each now names Ethereum Mainnet.

Model: opus-5-5

README.md

@@ -1474,23 +1474,24 @@ tracked.
 
 A tracked token is shown when its balance is nonzero, and any other ERC-20 when
 its balance is nonzero and it is in the bundled known-token list or has 1,000 or
-more holders. On Ethereum Mainnet, a token claiming a symbol from the bundled
-list from any other contract address is always dropped, tracked or not. On every
-network, a token claiming a label of the native asset is always dropped. Those
-labels are `"ETH"` and each network's `nativeCurrency`, such as `"SepoliaETH"`.
-That filter is unconditional — the "Hide tokens with fewer than 1,000 holders"
-setting governs the transaction history and the send-screen token selector, not
-this list. A token's holder count is unknown when the explorer reports none, or
-reports anything other than a whole number written in digits alone, such as
-`1,000` or `1e3` (`parseHoldersCount()` in `src/shared/holders.js`). This list
-does not take an unknown count as 1,000 or more, so such a token is shown only
-when it is on the bundled list or tracked. Every nonzero holding of a token
-shown is stored exactly, however small, but a holding below 0.000001 is left out
-of the balance lists, the send-screen token selector, the address total and the
-remove-address warning (`isBelowOneMillionth()` in
-`src/shared/amountDisplay.js`). The Send and confirmation screens show it when
-its token is the one being sent. Tracked tokens with a zero balance are listed
-as well while "Show tracked tokens with zero balance" is on.
+more holders. On Ethereum Mainnet, a token that claims a bundled token's symbol
+from another contract is always dropped, tracked or not. On every network, a
+token claiming a label of the native asset is always dropped. Those labels are
+`"ETH"` and each network's `nativeCurrency`, such as `"SepoliaETH"`. The balance
+list applies all three rules whatever the settings say. The "Hide tokens with
+fewer than 1,000 holders" setting governs only the transaction history and the
+send-screen token selector. A token's holder count is unknown when the explorer
+reports none, or reports anything other than a whole number written in digits
+alone, such as `1,000` or `1e3` (`parseHoldersCount()` in
+`src/shared/holders.js`). This list does not take an unknown count as 1,000 or
+more, so such a token is shown only when it is on the bundled list or tracked.
+Every nonzero holding of a token shown is stored exactly, however small, but a
+holding below 0.000001 is left out of the balance lists, the send-screen token
+selector, the address total and the remove-address warning
+(`isBelowOneMillionth()` in `src/shared/amountDisplay.js`). The Send and
+confirmation screens show it when its token is the one being sent. Tracked
+tokens with a zero balance are listed as well while "Show tracked tokens with
+zero balance" is on.
 
 #### Stored state and its version
 
@@ -3198,27 +3199,25 @@ indexes it as a real token transfer.
   Ethereum mainnet ERC-20s taken from the CoinGecko API, with decimals verified
   on-chain and addresses EIP-55 checksummed; `TOKENS` in
   `src/shared/tokenList.js` is the authoritative set. It is bundled at build
-  time and only changes when that file is regenerated. On Ethereum Mainnet, any
-  token transfer claiming a symbol from this list (e.g. "ETH", "USDT", "USDC")
-  but originating from an unrecognized contract address is identified as a spoof
-  and filtered from display. On another network, the list's symbols are not
-  checked, because the list holds mainnet contracts. The fake "Ethereum" token
-  in the attack above used symbol "ETH" from contract
-  `0xD05339f9Ea5ab9d9F03B9d57F671d2abD1F55c82`, which does not match the known
-  WETH contract — so it would be caught by this check. Detecting a spoof is also
-  what adds a contract to the fraud contract blocklist below; that is the only
-  thing that populates it. In the transaction history the check is the "Hide
-  fake tokens impersonating a known symbol" setting, on by default; with it off,
-  spoofed transfers are shown and no new blocklist entries are learned from
-  them. The send-screen token selector and the balance list apply the same check
-  unconditionally, because they decide which tokens the user can act on and what
-  the user believes they own rather than what the history displays. All three
-  surfaces read the rule from `src/shared/symbolSpoof.js`, so they cannot answer
-  the question differently. A symbol the list maps to no contract at all — the
-  native asset's labels: `"ETH"` and every network's `nativeCurrency`, such as
-  `"SepoliaETH"`, on every network — may be borne by no contract, so every
-  ERC-20 claiming it is a spoof on all three. The user's real ETH balance is not
-  an ERC-20 and is read over RPC, so the rule never sees it.
+  time and only changes when that file is regenerated. On Ethereum Mainnet, a
+  token that claims a symbol from this list, such as "USDT" or "USDC", is a
+  spoof unless its contract is the listed one. The wallet hides it. The fake
+  "Ethereum" token in the attack above used symbol "ETH" from contract
+  `0xD05339f9Ea5ab9d9F03B9d57F671d2abD1F55c82`. No contract may bear "ETH", so
+  that token is a spoof. Detecting a spoof is also what adds a contract to the
+  fraud contract blocklist below; that is the only thing that populates it. In
+  the transaction history the check is the "Hide fake tokens impersonating a
+  known symbol" setting, on by default; with it off, spoofed transfers are shown
+  and no new blocklist entries are learned from them. The send-screen token
+  selector and the balance list apply the same check unconditionally, because
+  they decide which tokens the user can act on and what the user believes they
+  own rather than what the history displays. All three surfaces read the rule
+  from `src/shared/symbolSpoof.js`, so they cannot answer the question
+  differently. A symbol the list maps to no contract at all — the native asset's
+  labels: `"ETH"` and every network's `nativeCurrency`, such as `"SepoliaETH"`,
+  on every network — may be borne by no contract, so every ERC-20 claiming it is
+  a spoof on all three. The user's real ETH balance is not an ERC-20 and is read
+  over RPC, so the rule never sees it.
 
 - **Low-holder token filtering**: Token transfers from ERC-20 contracts with
   fewer than 1,000 holders are hidden from transaction history by default.

src/shared/tokenList.js

@@ -3978,7 +3978,8 @@ function bundledToken(address, chainId) {
 // hides from the balance list, the history and the send selector at its own
 // address, so the user cannot spend it (issue #276).  Naming every address
 // that bears the symbol is the only shape that says what is true; it does not
-// loosen the rule, because a contract outside the set is still a spoof.
+// loosen the rule.  On Ethereum Mainnet, a contract outside the set is still a
+// spoof.
 const KNOWN_SYMBOLS = new Map();
 KNOWN_SYMBOLS.set("ETH", null);
 for (const network of Object.values(NETWORKS)) {